summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--CHANGELOG6
-rw-r--r--CREDITS10
-rw-r--r--MAINTAINERS8
-rw-r--r--Makefile20
-rw-r--r--board/dave/PPChameleonEVB/PPChameleonEVB.c72
-rw-r--r--board/dave/PPChameleonEVB/flash.c9
-rw-r--r--board/dave/common/flash.c2
-rw-r--r--cpu/ppc4xx/speed.c9
-rw-r--r--include/configs/PPChameleonEVB.h149
9 files changed, 215 insertions, 70 deletions
diff --git a/CHANGELOG b/CHANGELOG
index efd8663..13e223e 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,12 @@
Changes since U-Boot 1.1.1:
======================================================================
+* Patch by Andrea Marson, 11 Jun 2004:
+ Update for PPChameleon board:
+ - support for SysClk @ 25MHz
+ - support for Silicon Motion SM712 VGA controller
+ - some clean ups
+
* Patches by Richard Woodruff, 10 Jun 2004:
- fix problems with examples/stubs.c for GCC >= 3.4
- fix problems with gd initialization
diff --git a/CREDITS b/CREDITS
index 1c697fa..9b1f6a0 100644
--- a/CREDITS
+++ b/CREDITS
@@ -254,6 +254,11 @@ N: Dan Malek
E: dan@netx4.com
D: FADSROM, the grandfather of all of this
+N: Andrea "llandre" Marson
+E: andrea.marson@dave-tech.it
+D: Port to PPChameleonEVB board
+W: www.dave-tech.it
+
N: Reinhard Meyer
E: r.meyer@emk-elektronik.de
D: Port to EMK TOP860 Module
@@ -338,6 +343,11 @@ N: Kurt Stremerch
E: kurt@exys.be
D: Support for Exys XSEngine board
+N: Andrea Scian
+E: andrea.scian@dave-tech.it
+D: Port to B2 board
+W: www.dave-tech.it
+
N: Rob Taylor
E: robt@flyingpig.com
D: Port to MBX860T and Sandpoint8240
diff --git a/MAINTAINERS b/MAINTAINERS
index e6085bf..5b7d5ea 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -185,6 +185,10 @@ Eran Man <eran@nbase.co.il>
EVB64260_750CX MPC750CX
+Andrea "llandre" Marson <andrea.marson@dave-tech.it>
+
+ PPChameleonEVB PPC405EP
+
Reinhard Meyer <r.meyer@emk-elektronik.de>
TOP860 MPC860T
@@ -373,6 +377,10 @@ Robert Schwebel <r.schwebel@pengutronix.de>
csb226 xscale
innokom xscale
+Andrea Scian <andrea.scian@dave-tech.it>
+
+ B2 ARM7TDMI (S3C44B0X)
+
Alex Züpke <azu@sysgo.de>
lart SA1100
diff --git a/Makefile b/Makefile
index 26a6df4..ab1a3cc 100644
--- a/Makefile
+++ b/Makefile
@@ -606,7 +606,7 @@ wtk_config: unconfig
#########################################################################
## PPC4xx Systems
#########################################################################
-xtract_4xx = $(subst _MODEL_BA,,$(subst _MODEL_ME,,$(subst _MODEL_HI,,$(subst _config,,$1))))
+xtract_4xx = $(subst _25,,$(subst _33,,$(subst _BA,,$(subst _ME,,$(subst _HI,,$(subst _config,,$1))))))
ADCIOP_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx adciop esd
@@ -706,10 +706,12 @@ PLU405_config: unconfig
PMC405_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx pmc405 esd
-PPChameleonEVB_MODEL_BA_config \
-PPChameleonEVB_MODEL_ME_config \
-PPChameleonEVB_MODEL_HI_config \
-PPChameleonEVB_config: unconfig
+PPChameleonEVB_BA_25_config \
+PPChameleonEVB_ME_25_config \
+PPChameleonEVB_HI_25_config \
+PPChameleonEVB_BA_33_config \
+PPChameleonEVB_ME_33_config \
+PPChameleonEVB_HI_33_config: unconfig
@ >include/config.h
@[ -z "$(findstring _MODEL_BA,$@)" ] || \
{ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 0" >>include/config.h ; \
@@ -723,6 +725,14 @@ PPChameleonEVB_config: unconfig
{ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 2" >>include/config.h ; \
echo "... HIGH-END model" ; \
}
+ @[ -z "$(findstring _25,$@)" ] || \
+ { echo "#define CONFIG_PPCHAMELEON_CLK_25" >>include/config.h ; \
+ echo " SysClk = 25MHz" ; \
+ }
+ @[ -z "$(findstring _33,$@)" ] || \
+ { echo "#define CONFIG_PPCHAMELEON_CLK_33" >>include/config.h ; \
+ echo " SysClk = 33MHz" ; \
+ }
@./mkconfig -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave
VOH405_config: unconfig
diff --git a/board/dave/PPChameleonEVB/PPChameleonEVB.c b/board/dave/PPChameleonEVB/PPChameleonEVB.c
index b08b119..2b12f97 100644
--- a/board/dave/PPChameleonEVB/PPChameleonEVB.c
+++ b/board/dave/PPChameleonEVB/PPChameleonEVB.c
@@ -29,22 +29,9 @@
#include <command.h>
#include <malloc.h>
-/* ------------------------------------------------------------------------- */
-#if 0
-#define FPGA_DEBUG
-#endif
-
-/* fpga configuration data - gzip compressed and generated by bin2c */
-const unsigned char fpgadata[] =
-{
-#include "fpgadata.c"
-};
+/* ------------------------------------------------------------------------- */
-/*
- * include common fpga code (for esd boards)
- */
-#include "../common/fpga.c"
/* Prototypes */
@@ -60,13 +47,13 @@ int board_early_init_f (void)
* IRQ 0-15 405GP internally generated; active high; level sensitive
* IRQ 16 405GP internally generated; active low; level sensitive
* IRQ 17-24 RESERVED
- * IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive
- * IRQ 26 (EXT IRQ 1) SER0 ; active low; level sensitive
- * IRQ 27 (EXT IRQ 2) SER1; active low; level sensitive
- * IRQ 28 (EXT IRQ 3) FPGA 0; active low; level sensitive
- * IRQ 29 (EXT IRQ 4) FPGA 1; active low; level sensitive
- * IRQ 30 (EXT IRQ 5) PCI INTA; active low; level sensitive
- * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
+ * IRQ 25 (EXT IRQ 0)
+ * IRQ 26 (EXT IRQ 1)
+ * IRQ 27 (EXT IRQ 2)
+ * IRQ 28 (EXT IRQ 3)
+ * IRQ 29 (EXT IRQ 4)
+ * IRQ 30 (EXT IRQ 5)
+ * IRQ 31 (EXT IRQ 6)
*/
mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
mtdcr(uicer, 0x00000000); /* disable all ints */
@@ -268,8 +255,13 @@ nand_init(void)
{
ulong totlen = 0;
-#if (CONFIG_PPCHAMELEON_MODULE_MODEL == CONFIG_PPCHAMELEON_MODULE_ME) || \
+/*
+ The HI model is equipped with a large block NAND chip not supported yet
+ by U-Boot
(CONFIG_PPCHAMELEON_MODULE_MODEL == CONFIG_PPCHAMELEON_MODULE_HI)
+*/
+
+#if (CONFIG_PPCHAMELEON_MODULE_MODEL == CONFIG_PPCHAMELEON_MODULE_ME)
debug ("Probing at 0x%.8x\n", CFG_NAND0_BASE);
totlen += nand_probe (CFG_NAND0_BASE);
#endif /* CONFIG_PPCHAMELEON_MODULE_ME, CONFIG_PPCHAMELEON_MODULE_HI */
@@ -280,3 +272,39 @@ nand_init(void)
printf ("%4lu MB\n", totlen >>20);
}
#endif
+
+#ifdef CONFIG_CFB_CONSOLE
+# ifdef CONFIG_CONSOLE_EXTRA_INFO
+# include <video_fb.h>
+extern GraphicDevice smi;
+
+void video_get_info_str (int line_number, char *info)
+{
+ uint pvr = get_pvr ();
+
+ /* init video info strings for graphic console */
+ switch (line_number) {
+ case 1:
+ switch (pvr) {
+ case PVR_405EP_RB:
+ sprintf (info, " IBM PowerPC 405EP Rev. B");
+ break;
+ default:
+ sprintf (info, " IBM PowerPC 405EP Rev. <unknown>");
+ break;
+ }
+ return;
+ case 2:
+ sprintf (info, " DAVE Srl PPChameleonEVB - www.dave-tech.it");
+ return;
+ case 3:
+ sprintf (info, " %s", smi.modeIdent);
+ return;
+ }
+
+ /* no more info lines */
+ *info = 0;
+ return;
+}
+# endif /* CONFIG_CONSOLE_EXTRA_INFO */
+#endif /* CONFIG_CFB_CONSOLE */
diff --git a/board/dave/PPChameleonEVB/flash.c b/board/dave/PPChameleonEVB/flash.c
index 5f67360..692d275 100644
--- a/board/dave/PPChameleonEVB/flash.c
+++ b/board/dave/PPChameleonEVB/flash.c
@@ -50,6 +50,9 @@ unsigned long flash_init (void)
unsigned long base;
int size_val = 0;
+ debug("[%s, %d] Entering ...\n", __FUNCTION__, __LINE__);
+ debug("[%s, %d] flash_info = 0x%08X ...\n", __FUNCTION__, __LINE__, flash_info);
+
/* Init: no FLASHes known */
for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
flash_info[i].flash_id = FLASH_UNKNOWN;
@@ -57,6 +60,7 @@ unsigned long flash_init (void)
/* Static FLASH Bank configuration here - FIXME XXX */
+ debug("[%s, %d] Calling flash_get_size ...\n", __FUNCTION__, __LINE__);
size = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
if (flash_info[0].flash_id == FLASH_UNKNOWN) {
@@ -64,8 +68,11 @@ unsigned long flash_init (void)
size, size<<20);
}
+ debug("[%s, %d] Test point ...\n", __FUNCTION__, __LINE__);
+
/* Setup offsets */
flash_get_offsets (-size, &flash_info[0]);
+ debug("[%s, %d] Test point ...\n", __FUNCTION__, __LINE__);
/* Re-do sizing to get full correct info */
mtdcr(ebccfga, pb0cr);
@@ -91,6 +98,7 @@ unsigned long flash_init (void)
}
pbcr = (pbcr & 0x0001ffff) | base | (size_val << 17);
mtdcr(ebccfgd, pbcr);
+ debug("[%s, %d] Test point ...\n", __FUNCTION__, __LINE__);
/* Monitor protection ON by default */
(void)flash_protect(FLAG_PROTECT_SET,
@@ -98,6 +106,7 @@ unsigned long flash_init (void)
0xffffffff,
&flash_info[0]);
+ debug("[%s, %d] Test point ...\n", __FUNCTION__, __LINE__);
flash_info[0].size = size;
return (size);
diff --git a/board/dave/common/flash.c b/board/dave/common/flash.c
index 446defc..bf0f2bf 100644
--- a/board/dave/common/flash.c
+++ b/board/dave/common/flash.c
@@ -220,6 +220,8 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info)
ulong base = (ulong)addr;
volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *)addr;
+ debug("[%s, %d] Entering ...\n", __FUNCTION__, __LINE__);
+
/* Write auto select command: read Manufacturer ID */
addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00AA00AA;
addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE)0x00550055;
diff --git a/cpu/ppc4xx/speed.c b/cpu/ppc4xx/speed.c
index f8f88ff..be0de0c 100644
--- a/cpu/ppc4xx/speed.c
+++ b/cpu/ppc4xx/speed.c
@@ -383,8 +383,13 @@ void get_sys_info (PPC405_SYS_INFO * sysInfo)
*/
pllmr0_ccdv = ((pllmr0 & PLLMR0_CPU_DIV_MASK) >> 20) + 1;
if (pllmr1 & PLLMR1_SSCS_MASK) {
- sysInfo->freqProcessor = (CONFIG_SYS_CLK_FREQ * sysInfo->pllFbkDiv)
- / pllmr0_ccdv;
+ /*
+ * This is true if FWDVA == FWDVB:
+ * sysInfo->freqProcessor = (CONFIG_SYS_CLK_FREQ * sysInfo->pllFbkDiv)
+ * / pllmr0_ccdv;
+ */
+ sysInfo->freqProcessor = (CONFIG_SYS_CLK_FREQ * sysInfo->pllFbkDiv * sysInfo->pllFwdDivB)
+ / sysInfo->pllFwdDiv / pllmr0_ccdv;
} else {
sysInfo->freqProcessor = CONFIG_SYS_CLK_FREQ / pllmr0_ccdv;
}
diff --git a/include/configs/PPChameleonEVB.h b/include/configs/PPChameleonEVB.h
index 0c9b6dd..bb8ce43 100644
--- a/include/configs/PPChameleonEVB.h
+++ b/include/configs/PPChameleonEVB.h
@@ -38,6 +38,18 @@
#define CONFIG_PPCHAMELEON_MODULE_MODEL CONFIG_PPCHAMELEON_MODULE_BA
#endif
+
+/* Only one of the following two symbols must be defined (default is 25 MHz)
+ * CONFIG_PPCHAMELEON_CLK_25
+ * CONFIG_PPCHAMELEON_CLK_33
+ */
+
+#if (defined(CONFIG_PPCHAMELEON_CLK_25) && defined(CONFIG_PPCHAMELEON_CLK_33))
+#error "* Two external frequencies (SysClk) are defined! *"
+#endif
+
+#undef CONFIG_PPCHAMELEON_SMI712
+
/*
* Debug stuff
*/
@@ -60,7 +72,14 @@
#define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */
#define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */
+
+#ifdef CONFIG_PPCHAMELEON_CLK_25
+ #define CONFIG_SYS_CLK_FREQ 25000000 /* external frequency to pll */
+#elif (defined (CONFIG_PPCHAMELEON_CLK_33))
#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */
+#else
+#error "* External frequency (SysClk) not defined! *"
+#endif
#define CONFIG_BAUDRATE 115200
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
@@ -75,7 +94,6 @@
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
-
#undef CONFIG_EXT_PHY
#define CONFIG_NET_MULTI 1
@@ -184,7 +202,6 @@
#define CFG_NAND1_ALE (0x80000000 >> 16) /* our ALE is GPIO16 */
#define CFG_NAND1_RDY (0x80000000 >> 31) /* our RDY is GPIO31 */
-
#define NAND_DISABLE_CE(nand) do \
{ \
switch((unsigned long)(((struct nand_chip *)nand)->IO_ADDR)) \
@@ -211,7 +228,6 @@
} \
} while(0)
-
#define NAND_CTL_CLRALE(nandptr) do \
{ \
switch((unsigned long)nandptr) \
@@ -292,9 +308,10 @@
#define CONFIG_PCI_SCAN_SHOW /* print pci devices @ startup */
-#define CFG_PCI_SUBSYS_VENDORID 0x12FE /* PCI Vendor ID: esd gmbh */
-#define CFG_PCI_SUBSYS_DEVICEID 0x0405 /* PCI Device ID: CPCI-405 */
+#define CFG_PCI_SUBSYS_VENDORID 0x1014 /* PCI Vendor ID: IBM */
+#define CFG_PCI_SUBSYS_DEVICEID 0x0000 /* PCI Device ID: --- */
#define CFG_PCI_CLASSCODE 0x0b20 /* PCI Class Code: Processor/PPC*/
+
#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */
#define CFG_PCI_PTM1MS 0xfc000001 /* 64MB, enable hard-wired to 1 */
#define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */
@@ -349,12 +366,23 @@
/*-----------------------------------------------------------------------
* Environment Variable setup
*/
+#ifdef ENVIRONMENT_IN_EEPROM
+
+#define CFG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */
+#define CFG_ENV_OFFSET 0x100 /* environment starts at the beginning of the EEPROM */
+#define CFG_ENV_SIZE 0x700 /* 2048-256 bytes may be used for env vars (total size of a CAT24WC16 is 2048 bytes)*/
+
+#else /* DEFAULT: environment in flash, using redundand flash sectors */
+
#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
#define CFG_ENV_ADDR 0xFFFF8000 /* environment starts at the first small sector */
#define CFG_ENV_SECT_SIZE 0x2000 /* 8196 bytes may be used for env vars*/
#define CFG_ENV_ADDR_REDUND 0xFFFFA000
#define CFG_ENV_SIZE_REDUND 0x2000
+#endif /* ENVIRONMENT_IN_EEPROM */
+
+
#define CFG_NVRAM_BASE_ADDR 0xF0000500 /* NVRAM base address */
#define CFG_NVRAM_SIZE 242 /* NVRAM size */
@@ -414,23 +442,21 @@
#define CFG_EBC_PB3AP 0x92015480
#define CFG_EBC_PB3CR 0xFF058000 /* BAS=0xFF0,BS=4MB,BU=R/W,BW=8bit */
-
-#if 0 /* Roese */
-/* Memory Bank 1 (Flash Bank 1, NAND-FLASH) initialization */
-#define CFG_EBC_PB1AP 0x92015480
-#define CFG_EBC_PB1CR 0xFF858000 /* BAS=0xFF8,BS=4MB,BU=R/W,BW=8bit */
-
-/* Memory Bank 2 (CAN0, 1) initialization */
-#define CFG_EBC_PB2AP 0x010053C0 /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
-#define CFG_EBC_PB2CR 0xF0018000 /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit */
-
-/* Memory Bank 3 (CompactFlash IDE) initialization */
-#define CFG_EBC_PB3AP 0x010053C0 /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
-#define CFG_EBC_PB3CR 0xF011A000 /* BAS=0xF01,BS=1MB,BU=R/W,BW=16bit */
-
-/* Memory Bank 4 (NVRAM/RTC) initialization */
-#define CFG_EBC_PB4AP 0x01005280 /* TWT=2,WBN=1,WBF=1,TH=1,SOR=1 */
-#define CFG_EBC_PB4CR 0xF0218000 /* BAS=0xF02,BS=1MB,BU=R/W,BW=8bit */
+#ifdef CONFIG_PPCHAMELEON_SMI712
+/*
+ * Video console (graphic: SMI LynxEM)
+ */
+#define CONFIG_VIDEO
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VIDEO_SMI_LYNXEM
+#define CONFIG_VIDEO_LOGO
+/*#define CONFIG_VIDEO_BMP_LOGO*/
+#define CONFIG_CONSOLE_EXTRA_INFO
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+/* This is the base address (on 405EP-side) used to generate I/O accesses on PCI bus */
+#define CFG_ISA_IO 0xE8000000
+/* see also drivers/videomodes.c */
+#define CFG_DEFAULT_VIDEO_MODE 0x303
#endif
/*-----------------------------------------------------------------------
@@ -485,6 +511,7 @@
#define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR /* inside of SDRAM */
#define CFG_INIT_RAM_END CFG_OCM_DATA_SIZE /* End of used area in RAM */
+
#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
@@ -525,7 +552,6 @@
/*--------------------------------------------------------------------*/
#ifdef CONFIG_NO_SERIAL_EEPROM
-
/*
!-----------------------------------------------------------------------
! Defines for entry options.
@@ -537,7 +563,6 @@
#define DIMM_READ_ADDR 0xAB
#define DIMM_WRITE_ADDR 0xAA
-
#define CPC0_PLLMR0 (CNTRL_DCR_BASE+0x0) /* PLL mode 0 register */
#define CPC0_BOOT (CNTRL_DCR_BASE+0x1) /* Chip Clock Status register */
#define CPC0_CR1 (CNTRL_DCR_BASE+0x2) /* Chip Control 1 register */
@@ -649,50 +674,92 @@
#define PLL_PCIDIV_3 0x00000002
#define PLL_PCIDIV_4 0x00000003
+
+#ifdef CONFIG_PPCHAMELEON_CLK_25
+/* CPU - PLB/SDRAM - EBC - OPB - PCI (assuming a 25.0 MHz input clock to the 405EP) */
+#define PPCHAMELEON_PLLMR0_133_133_33_66_33 (PLL_CPUDIV_1 | PLL_PLBDIV_1 | \
+ PLL_OPBDIV_2 | PLL_EXTBUSDIV_4 | \
+ PLL_MALDIV_1 | PLL_PCIDIV_4)
+#define PPCHAMELEON_PLLMR1_133_133_33_66_33 (PLL_FBKDIV_8 | \
+ PLL_FWDDIVA_6 | PLL_FWDDIVB_4 | \
+ PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW)
+
+#define PPCHAMELEON_PLLMR0_200_100_50_33 (PLL_CPUDIV_1 | PLL_PLBDIV_2 | \
+ PLL_OPBDIV_2 | PLL_EXTBUSDIV_3 | \
+ PLL_MALDIV_1 | PLL_PCIDIV_4)
+#define PPCHAMELEON_PLLMR1_200_100_50_33 (PLL_FBKDIV_8 | \
+ PLL_FWDDIVA_4 | PLL_FWDDIVB_4 | \
+ PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW)
+
+#define PPCHAMELEON_PLLMR0_266_133_33_66_33 (PLL_CPUDIV_1 | PLL_PLBDIV_2 | \
+ PLL_OPBDIV_2 | PLL_EXTBUSDIV_4 | \
+ PLL_MALDIV_1 | PLL_PCIDIV_4)
+#define PPCHAMELEON_PLLMR1_266_133_33_66_33 (PLL_FBKDIV_8 | \
+ PLL_FWDDIVA_3 | PLL_FWDDIVB_4 | \
+ PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW)
+
+#define PPCHAMELEON_PLLMR0_333_111_37_55_55 (PLL_CPUDIV_1 | PLL_PLBDIV_3 | \
+ PLL_OPBDIV_2 | PLL_EXTBUSDIV_3 | \
+ PLL_MALDIV_1 | PLL_PCIDIV_2)
+#define PPCHAMELEON_PLLMR1_333_111_37_55_55 (PLL_FBKDIV_10 | \
+ PLL_FWDDIVA_3 | PLL_FWDDIVB_4 | \
+ PLL_TUNE_15_M_40 | PLL_TUNE_VCO_HI)
+
+#elif (defined (CONFIG_PPCHAMELEON_CLK_33))
+
/* CPU - PLB/SDRAM - EBC - OPB - PCI (assuming a 33.3MHz input clock to the 405EP) */
-#define PLLMR0_133_133_33_66_33 (PLL_CPUDIV_1 | PLL_PLBDIV_1 | \
+#define PPCHAMELEON_PLLMR0_133_133_33_66_33 (PLL_CPUDIV_1 | PLL_PLBDIV_1 | \
PLL_OPBDIV_2 | PLL_EXTBUSDIV_4 | \
PLL_MALDIV_1 | PLL_PCIDIV_4)
-#define PLLMR1_133_133_33_66_33 (PLL_FBKDIV_4 | \
+#define PPCHAMELEON_PLLMR1_133_133_33_66_33 (PLL_FBKDIV_4 | \
PLL_FWDDIVA_6 | PLL_FWDDIVB_6 | \
PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW)
-#define PLLMR0_200_100_50_33 (PLL_CPUDIV_1 | PLL_PLBDIV_2 | \
+
+#define PPCHAMELEON_PLLMR0_200_100_50_33 (PLL_CPUDIV_1 | PLL_PLBDIV_2 | \
PLL_OPBDIV_2 | PLL_EXTBUSDIV_3 | \
PLL_MALDIV_1 | PLL_PCIDIV_4)
-#define PLLMR1_200_100_50_33 (PLL_FBKDIV_6 | \
+#define PPCHAMELEON_PLLMR1_200_100_50_33 (PLL_FBKDIV_6 | \
PLL_FWDDIVA_4 | PLL_FWDDIVB_4 | \
PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW)
-#define PLLMR0_266_133_33_66_33 (PLL_CPUDIV_1 | PLL_PLBDIV_2 | \
+
+#define PPCHAMELEON_PLLMR0_266_133_33_66_33 (PLL_CPUDIV_1 | PLL_PLBDIV_2 | \
PLL_OPBDIV_2 | PLL_EXTBUSDIV_4 | \
PLL_MALDIV_1 | PLL_PCIDIV_4)
-#define PLLMR1_266_133_33_66_33 (PLL_FBKDIV_8 | \
+#define PPCHAMELEON_PLLMR1_266_133_33_66_33 (PLL_FBKDIV_8 | \
PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \
PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW)
-#define PLLMR0_333_111_37_55_55 (PLL_CPUDIV_1 | PLL_PLBDIV_3 | \
+
+#define PPCHAMELEON_PLLMR0_333_111_37_55_55 (PLL_CPUDIV_1 | PLL_PLBDIV_3 | \
PLL_OPBDIV_2 | PLL_EXTBUSDIV_3 | \
PLL_MALDIV_1 | PLL_PCIDIV_2)
-#define PLLMR1_333_111_37_55_55 (PLL_FBKDIV_10 | \
+#define PPCHAMELEON_PLLMR1_333_111_37_55_55 (PLL_FBKDIV_10 | \
PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \
PLL_TUNE_15_M_40 | PLL_TUNE_VCO_HI)
+#else
+#error "* External frequency (SysClk) not defined! *"
+#endif
+
#if (CONFIG_PPCHAMELEON_MODULE_MODEL == CONFIG_PPCHAMELEON_MODULE_HI)
/* Model HI */
-#define PLLMR0_DEFAULT PLLMR0_333_111_37_55_55
-#define PLLMR1_DEFAULT PLLMR1_333_111_37_55_55
+#define PLLMR0_DEFAULT PPCHAMELEON_PLLMR0_333_111_37_55_55
+#define PLLMR1_DEFAULT PPCHAMELEON_PLLMR1_333_111_37_55_55
+#define CFG_OPB_FREQ 55555555
/* Model ME */
#elif (CONFIG_PPCHAMELEON_MODULE_MODEL == CONFIG_PPCHAMELEON_MODULE_ME)
-#define PLLMR0_DEFAULT PLLMR0_266_133_33_66_33
-#define PLLMR1_DEFAULT PLLMR1_266_133_33_66_33
+#define PLLMR0_DEFAULT PPCHAMELEON_PLLMR0_266_133_33_66_33
+#define PLLMR1_DEFAULT PPCHAMELEON_PLLMR1_266_133_33_66_33
+#define CFG_OPB_FREQ 66666666
#else
/* Model BA (default) */
-#define PLLMR0_DEFAULT PLLMR0_133_133_33_66_33
-#define PLLMR1_DEFAULT PLLMR1_133_133_33_66_33
-
+#define PLLMR0_DEFAULT PPCHAMELEON_PLLMR0_133_133_33_66_33
+#define PLLMR1_DEFAULT PPCHAMELEON_PLLMR1_133_133_33_66_33
+#define CFG_OPB_FREQ 66666666
#endif
-#endif /* CONFIG_NO_SERIAL_EEPROM */
+#endif
-#define CONFIG_JFFS2_NAND 1 /* jffs2 on nand support */
+#define CONFIG_JFFS2_NAND 0 /* jffs2 on nand support */
#define CONFIG_JFFS2_NAND_DEV 0 /* nand device jffs2 lives on */
#define CONFIG_JFFS2_NAND_OFF 0 /* start of jffs2 partition */
#define CONFIG_JFFS2_NAND_SIZE 2*1024*1024 /* size of jffs2 partition */