summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--include/fsl_nfc.h86
-rw-r--r--nand_spl/nand_boot_fsl_nfc.c72
2 files changed, 131 insertions, 27 deletions
diff --git a/include/fsl_nfc.h b/include/fsl_nfc.h
index da5be37..279aaa5 100644
--- a/include/fsl_nfc.h
+++ b/include/fsl_nfc.h
@@ -1,5 +1,4 @@
/*
- *
* (c) 2009 Magnus Lilja <lilja.magnus@gmail.com>
*
* See file CREDITS for list of people who contributed to this
@@ -25,21 +24,57 @@
#define __FSL_NFC_H
/*
+ * TODO: Use same register defs for nand_spl mxc nand driver
+ * and mtd mxc nand driver.
+ *
* Register map and bit definitions for the Freescale NAND Flash
- * Controller present in i.MX31 and other devices.
+ * Controller present in various i.MX devices.
+ *
+ * MX31 and MX27 have version 1 which has
+ * 4 512 byte main buffers and
+ * 4 16 byte spare buffers
+ * to support up to 2K byte pagesize nand.
+ * Reading or writing a 2K page requires 4 FDI/FDO cycles.
+ *
+ * MX25 has version 1.1 which has
+ * 8 512 byte main buffers and
+ * 8 64 byte spare buffers
+ * to support up to 4K byte pagesize nand.
+ * Reading or writing a 2K or 4K page requires only 1 FDI/FDO cycle.
+ * Also some of registers are moved and/or changed meaning as seen below.
*/
+#if defined(CONFIG_MX31) || defined(CONFIG_MX27)
+#define MXC_NFC_V1
+#elif defined(CONFIG_MX25)
+#define MXC_NFC_V1_1
+#else
+#warning "MXC NFC version not defined"
+#endif
+
+#if defined(MXC_NFC_V1)
+#define NAND_MXC_NR_BUFS 4
+#define NAND_MXC_SPARE_BUF_SIZE 16
+#define NAND_MXC_REG_OFFSET 0xe00
+#define NAND_MXC_2K_MULTI_CYCLE 1
+#elif defined(MXC_NFC_V1_1)
+#define NAND_MXC_NR_BUFS 8
+#define NAND_MXC_SPARE_BUF_SIZE 64
+#define NAND_MXC_REG_OFFSET 0x1e00
+#else
+#error "define CONFIG_NAND_MXC_VXXX to use the mxc spl_nand driver"
+#endif
struct fsl_nfc_regs {
- u32 main_area0[128]; /* @0x000 */
- u32 main_area1[128];
- u32 main_area2[128];
- u32 main_area3[128];
- u32 spare_area0[4];
- u32 spare_area1[4];
- u32 spare_area2[4];
- u32 spare_area3[4];
- u32 reserved1[64 - 16 + 64 * 5];
- u16 bufsiz; /* @ 0xe00 */
+ u32 main_area[NAND_MXC_NR_BUFS][512/4];
+ u32 spare_area[NAND_MXC_NR_BUFS][NAND_MXC_SPARE_BUF_SIZE/4];
+ /*
+ * reserved size is offset of nfc registers
+ * minus total main and spare sizes
+ */
+ u8 reserved1[NAND_MXC_REG_OFFSET
+ - NAND_MXC_NR_BUFS * (512 + NAND_MXC_SPARE_BUF_SIZE)];
+#if defined(MXC_NFC_V1)
+ u16 bufsiz;
u16 reserved2;
u16 buffer_address;
u16 flash_add;
@@ -54,6 +89,30 @@ struct fsl_nfc_regs {
u16 nand_flash_wr_pr_st;
u16 nand_flash_config1;
u16 nand_flash_config2;
+#elif defined(MXC_NFC_V1_1)
+ u16 reserved2[2];
+ u16 buffer_address;
+ u16 flash_add;
+ u16 flash_cmd;
+ u16 configuration;
+ u16 ecc_status_result;
+ u16 ecc_status_result2;
+ u16 spare_area_size;
+ u16 nf_wr_prot;
+ u16 reserved3[2];
+ u16 nand_flash_wr_pr_st;
+ u16 nand_flash_config1;
+ u16 nand_flash_config2;
+ u16 reserved4;
+ u16 unlock_start_blk_add0;
+ u16 unlock_end_blk_add0;
+ u16 unlock_start_blk_add1;
+ u16 unlock_end_blk_add1;
+ u16 unlock_start_blk_add2;
+ u16 unlock_end_blk_add2;
+ u16 unlock_start_blk_add3;
+ u16 unlock_end_blk_add3;
+#endif
};
/*
@@ -98,6 +157,9 @@ struct fsl_nfc_regs {
*/
#define NFC_INT 0x8000
+#ifdef MXC_NFC_V1_1
+#define NFC_4_8N_ECC (1 << 0)
+#endif
#define NFC_SP_EN (1 << 2)
#define NFC_ECC_EN (1 << 3)
#define NFC_INT_MSK (1 << 4)
diff --git a/nand_spl/nand_boot_fsl_nfc.c b/nand_spl/nand_boot_fsl_nfc.c
index a9df2a8..f4040a7 100644
--- a/nand_spl/nand_boot_fsl_nfc.c
+++ b/nand_spl/nand_boot_fsl_nfc.c
@@ -26,11 +26,15 @@
#include <common.h>
#include <nand.h>
+#ifdef CONFIG_MX31
#include <asm-arm/arch/mx31-regs.h>
+#else
+#include <asm-arm/arch/imx-regs.h>
+#endif
#include <asm/io.h>
#include <fsl_nfc.h>
-static struct fsl_nfc_regs *nfc;
+struct fsl_nfc_regs *nfc;
static void nfc_wait_ready(void)
{
@@ -45,13 +49,35 @@ static void nfc_wait_ready(void)
writew(tmp, &nfc->nand_flash_config2);
}
-static void nfc_nand_init(void)
+void nfc_nand_init(void)
{
+#if defined(MXC_NFC_V1_1)
+ int ecc_per_page = CONFIG_SYS_NAND_PAGE_SIZE / 512;
+ int config1;
+
+ writew(CONFIG_SYS_NAND_SPARE_SIZE / 2, &nfc->spare_area_size);
+
+ /* unlocking RAM Buff */
+ writew(0x2, &nfc->configuration);
+
+ /* hardware ECC checking and correct */
+ config1 = readw(&nfc->nand_flash_config1) | NFC_ECC_EN | 0x800;
+ /*
+ * if spare size is larger that 16 bytes per 512 byte hunk
+ * then use 8 symbol correction instead of 4
+ */
+ if ((CONFIG_SYS_NAND_SPARE_SIZE / ecc_per_page) > 16)
+ config1 &= ~NFC_4_8N_ECC;
+ else
+ config1 |= NFC_4_8N_ECC;
+ writew(config1, &nfc->nand_flash_config1);
+#elif defined(MXC_NFC_V1)
/* unlocking RAM Buff */
writew(0x2, &nfc->configuration);
/* hardware ECC checking and correct */
writew(NFC_ECC_EN, &nfc->nand_flash_config1);
+#endif
}
static void nfc_nand_command(unsigned short command)
@@ -65,12 +91,12 @@ static void nfc_nand_page_address(unsigned int page_address)
{
unsigned int page_count;
- writew(0x00, &nfc->flash_cmd);
+ writew(0x00, &nfc->flash_add);
writew(NFC_ADDR, &nfc->nand_flash_config2);
nfc_wait_ready();
- /* code only for 2kb flash */
- if (CONFIG_SYS_NAND_PAGE_SIZE == 0x800) {
+ /* code only for large page flash */
+ if (CONFIG_SYS_NAND_PAGE_SIZE > 512) {
writew(0x00, &nfc->flash_add);
writew(NFC_ADDR, &nfc->nand_flash_config2);
nfc_wait_ready();
@@ -88,22 +114,38 @@ static void nfc_nand_page_address(unsigned int page_address)
page_count = page_count >> 8;
} while (page_count);
}
+
+ writew(0x00, &nfc->flash_add);
+ writew(NFC_ADDR, &nfc->nand_flash_config2);
+ nfc_wait_ready();
}
static void nfc_nand_data_output(void)
{
+ int config1 = readw(&nfc->nand_flash_config1);
+#ifdef NAND_MXC_2K_MULTI_CYCLE
int i;
+#endif
+ config1 |= NFC_ECC_EN | NFC_INT_MSK;
+ writew(config1, &nfc->nand_flash_config1);
+ writew(0, &nfc->buffer_address);
+ writew(NFC_OUTPUT, &nfc->nand_flash_config2);
+ nfc_wait_ready();
+#ifdef NAND_MXC_2K_MULTI_CYCLE
/*
- * The NAND controller requires four output commands for
- * large page devices.
+ * This NAND controller requires multiple input commands
+ * for pages larger than 512 bytes.
*/
- for (i = 0; i < (CONFIG_SYS_NAND_PAGE_SIZE / 512); i++) {
- writew(NFC_ECC_EN, &nfc->nand_flash_config1);
- writew(i, &nfc->buffer_address); /* read in i:th buffer */
+ for (i = 1; i < (CONFIG_SYS_NAND_PAGE_SIZE / 512); i++) {
+ config1 = readw(&nfc->nand_flash_config1);
+ config1 |= NFC_ECC_EN | NFC_INT_MSK;
+ writew(config1, &nfc->nand_flash_config1);
+ writew(i, &nfc->buffer_address);
writew(NFC_OUTPUT, &nfc->nand_flash_config2);
nfc_wait_ready();
}
+#endif
}
static int nfc_nand_check_ecc(void)
@@ -121,7 +163,7 @@ static int nfc_read_page(unsigned int page_address, unsigned char *buf)
nfc_nand_command(NAND_CMD_READ0);
nfc_nand_page_address(page_address);
- if (CONFIG_SYS_NAND_PAGE_SIZE == 0x800)
+ if (CONFIG_SYS_NAND_PAGE_SIZE > 512)
nfc_nand_command(NAND_CMD_READSTART);
nfc_nand_data_output(); /* fill the main buffer 0 */
@@ -129,7 +171,7 @@ static int nfc_read_page(unsigned int page_address, unsigned char *buf)
if (nfc_nand_check_ecc())
return -1;
- src = &nfc->main_area0[0];
+ src = &nfc->main_area[0][0];
dst = (u32 *)buf;
/* main copy loop from NAND-buffer to SDRAM memory */
@@ -154,12 +196,12 @@ static int is_badblock(int pagenumber)
nfc_nand_command(NAND_CMD_READ0);
nfc_nand_page_address(page);
- if (CONFIG_SYS_NAND_PAGE_SIZE == 0x800)
+ if (CONFIG_SYS_NAND_PAGE_SIZE > 512)
nfc_nand_command(NAND_CMD_READSTART);
nfc_nand_data_output(); /* fill the main buffer 0 */
- src = &nfc->spare_area0[0];
+ src = &nfc->spare_area[0][0];
/*
* IMPORTANT NOTE: The nand flash controller uses a non-
@@ -209,7 +251,7 @@ static int nand_load(unsigned int from, unsigned int size, unsigned char *buf)
if (!(page % CONFIG_SYS_NAND_PAGE_COUNT)) {
/*
* Yes, new block. See if this block is good. If not,
- * loop until we find i good block.
+ * loop until we find a good block.
*/
while (is_badblock(page)) {
page = page + CONFIG_SYS_NAND_PAGE_COUNT;