summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--CHANGELOG4
-rw-r--r--common/cmd_flash.c108
2 files changed, 108 insertions, 4 deletions
diff --git a/CHANGELOG b/CHANGELOG
index 3a8a534..4054e82 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,10 @@
Changes for U-Boot 1.1.3:
======================================================================
+* Add new argument format for flash commands to allow for usage like
+ "erase $(addr) +$(filesize)", i. e. a size argument can be used and
+ U-Boot will automaticially find the end of the corresponding sector.
+
* Patch by Stefan Roese, 5 Jul 2005:
Update uc100 board PHY setup
diff --git a/common/cmd_flash.c b/common/cmd_flash.c
index b2728ab..a0ccdb6 100644
--- a/common/cmd_flash.c
+++ b/common/cmd_flash.c
@@ -96,6 +96,93 @@ abbrev_spec (char *str, flash_info_t ** pinfo, int *psf, int *psl)
return 1;
}
+/*
+ * This function computes the start and end addresses for both
+ * erase and protect commands. The range of the addresses on which
+ * either of the commands is to operate can be given in two forms:
+ * 1. <cmd> start end - operate on <'start', 'end')
+ * 2. <cmd> start +length - operate on <'start', start + length)
+ * If the second form is used and the end address doesn't fall on the
+ * sector boundary, than it will be adjusted to the next sector boundary.
+ * If it isn't in the flash, the function will fail (return -1).
+ * Input:
+ * arg1, arg2: address specification (i.e. both command arguments)
+ * Output:
+ * addr_first, addr_last: computed address range
+ * Return:
+ * 1: success
+ * -1: failure (bad format, bad address).
+*/
+static int
+addr_spec(char *arg1, char *arg2, ulong *addr_first, ulong *addr_last)
+{
+ char *ep;
+ *addr_first = simple_strtoul(arg1, &ep, 16);
+ if (ep == arg1 || *ep != '\0')
+ return -1;
+
+ char len_used = 0; /* indicates if the "start +length" form used */
+ if (arg2 && *arg2 == '+'){
+ len_used = 1;
+ ++arg2;
+ }
+
+ *addr_last = simple_strtoul(arg2, &ep, 16);
+ if (ep == arg2 || *ep != '\0')
+ return -1;
+
+ if (len_used){
+ /*
+ * *addr_last has the length, compute correct *addr_last
+ * XXX watch out for the integer overflow! Right now it is
+ * checked for in both the callers.
+ */
+ *addr_last = *addr_first + *addr_last - 1;
+
+ /*
+ * It may happen that *addr_last doesn't fall on the sector
+ * boundary. We want to round such an address to the next
+ * sector boundary, so that the commands don't fail later on.
+ */
+
+ /* find the end addr of the sector where the *addr_last is */
+ char found = 0;
+ ulong bank;
+ for (bank = 0; bank < CFG_MAX_FLASH_BANKS && !found; ++bank){
+ int i;
+ flash_info_t *info = &flash_info[bank];
+ for (i = 0; i < info->sector_count && !found; ++i){
+ /* get the end address of the sector */
+ ulong sector_end_addr;
+ if (i == info->sector_count - 1){
+ sector_end_addr =
+ info->start[0] + info->size - 1;
+ } else {
+ sector_end_addr =
+ info->start[i+1] - 1;
+ }
+ if (*addr_last <= sector_end_addr &&
+ *addr_last >= info->start[i]){
+ /* sector found */
+ found = 1;
+ /* adjust *addr_last if necessary */
+ if (*addr_last < sector_end_addr){
+ *addr_last = sector_end_addr;
+ }
+ }
+ } /* sector */
+ } /* bank */
+ if (!found){
+ /* error, addres not in flash */
+ printf("Error: end address (0x%08lx) not in flash!\n",
+ *addr_last);
+ return -1;
+ }
+ } /* "start +length" from used */
+
+ return 1;
+}
+
static int
flash_fill_sect_ranges (ulong addr_first, ulong addr_last,
int *s_first, int *s_last,
@@ -256,8 +343,10 @@ int do_flerase (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
return rcode;
}
- addr_first = simple_strtoul(argv[1], NULL, 16);
- addr_last = simple_strtoul(argv[2], NULL, 16);
+ if (addr_spec(argv[1], argv[2], &addr_first, &addr_last) < 0){
+ printf ("Bad address format\n");
+ return 1;
+ }
if (addr_first >= addr_last) {
printf ("Usage:\n%s\n", cmdtp->usage);
@@ -435,8 +524,10 @@ int do_protect (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
return rcode;
}
- addr_first = simple_strtoul(argv[2], NULL, 16);
- addr_last = simple_strtoul(argv[3], NULL, 16);
+ if (addr_spec(argv[2], argv[3], &addr_first, &addr_last) < 0){
+ printf("Bad address format\n");
+ return 1;
+ }
if (addr_first >= addr_last) {
printf ("Usage:\n%s\n", cmdtp->usage);
@@ -511,6 +602,9 @@ U_BOOT_CMD(
"erase - erase FLASH memory\n",
"start end\n"
" - erase FLASH from addr 'start' to addr 'end'\n"
+ "erase start +len\n"
+ " - erase FLASH from addr 'start' to the end of sect "
+ "w/addr 'start'+'len'-1\n"
"erase N:SF[-SL]\n - erase sectors SF-SL in FLASH bank # N\n"
"erase bank N\n - erase FLASH bank # N\n"
"erase all\n - erase all FLASH banks\n"
@@ -521,12 +615,18 @@ U_BOOT_CMD(
"protect - enable or disable FLASH write protection\n",
"on start end\n"
" - protect FLASH from addr 'start' to addr 'end'\n"
+ "protect on start +len\n"
+ " - protect FLASH from addr 'start' to end of sect "
+ "w/addr 'start'+'len'-1\n"
"protect on N:SF[-SL]\n"
" - protect sectors SF-SL in FLASH bank # N\n"
"protect on bank N\n - protect FLASH bank # N\n"
"protect on all\n - protect all FLASH banks\n"
"protect off start end\n"
" - make FLASH from addr 'start' to addr 'end' writable\n"
+ "protect off start +len\n"
+ " - make FLASH from addr 'start' to end of sect "
+ "w/addr 'start'+'len'-1 wrtable\n"
"protect off N:SF[-SL]\n"
" - make sectors SF-SL writable in FLASH bank # N\n"
"protect off bank N\n - make FLASH bank # N writable\n"