diff options
-rw-r--r-- | board/ti/am57xx/board.c | 78 |
1 files changed, 70 insertions, 8 deletions
diff --git a/board/ti/am57xx/board.c b/board/ti/am57xx/board.c index 1dcc8a3..1cfc08b 100644 --- a/board/ti/am57xx/board.c +++ b/board/ti/am57xx/board.c @@ -54,6 +54,19 @@ DECLARE_GLOBAL_DATA_PTR; /* GPIO 7_11 */ #define GPIO_DDR_VTT_EN 203 +/* Touch screen controller to identify the LCD */ +#define OSD_TS_FT_BUS_ADDRESS 0 +#define OSD_TS_FT_CHIP_ADDRESS 0x38 +#define OSD_TS_FT_REG_ID 0xA3 +/* + * Touchscreen IDs for various OSD panels + * Ref: http://www.osddisplays.com/TI/OSD101T2587-53TS_A.1.pdf + */ +/* Used on newer osd101t2587 Panels */ +#define OSD_TS_FT_ID_5x46 0x54 +/* Used on older osd101t2045 Panels */ +#define OSD_TS_FT_ID_5606 0x08 + #define SYSINFO_BOARD_NAME_MAX_LEN 45 #define TPS65903X_PRIMARY_SECONDARY_PAD2 0xFB @@ -473,10 +486,64 @@ int board_init(void) return 0; } -int board_late_init(void) +void am57x_idk_lcd_detect(void) { - char *idk_lcd; + int r = -ENODEV; + char *idk_lcd = "no"; + uint8_t buf = 0; + + /* Only valid for IDKs */ + if (board_is_x15() || board_is_am572x_evm()) + return; + + /* Only AM571x IDK has gpio control detect.. so check that */ + if (board_is_am571x_idk() && !am571x_idk_needs_lcd()) + goto out; + + r = i2c_set_bus_num(OSD_TS_FT_BUS_ADDRESS); + if (r) { + printf("%s: Failed to set bus address to %d: %d\n", + __func__, OSD_TS_FT_BUS_ADDRESS, r); + goto out; + } + r = i2c_probe(OSD_TS_FT_CHIP_ADDRESS); + if (r) { + /* AM572x IDK has no explicit settings for optional LCD kit */ + if (board_is_am571x_idk()) { + printf("%s: Touch screen detect failed: %d!\n", + __func__, r); + } + goto out; + } + + /* Read FT ID */ + r = i2c_read(OSD_TS_FT_CHIP_ADDRESS, OSD_TS_FT_REG_ID, 1, &buf, 1); + if (r) { + printf("%s: Touch screen ID read %d:0x%02x[0x%02x] failed:%d\n", + __func__, OSD_TS_FT_BUS_ADDRESS, OSD_TS_FT_CHIP_ADDRESS, + OSD_TS_FT_REG_ID, r); + goto out; + } + + switch (buf) { + case OSD_TS_FT_ID_5606: + idk_lcd = "osd101t2045"; + break; + case OSD_TS_FT_ID_5x46: + idk_lcd = "osd101t2587"; + break; + default: + printf("%s: Unidentifed Touch screen ID 0x%02x\n", + __func__, buf); + /* we will let default be "no lcd" */ + } +out: + setenv("idk_lcd", idk_lcd); + return; +} +int board_late_init(void) +{ setup_board_eeprom_env(); u8 val; @@ -507,12 +574,7 @@ int board_late_init(void) omap_die_id_serial(); - /* TBD: Add LCD panel detection once information is available */ - if (am571x_idk_needs_lcd()) - idk_lcd = "osd101t2045"; /* Default to legacy LCD */ - else - idk_lcd = "no"; - setenv("idk_lcd", idk_lcd); + am57x_idk_lcd_detect(); #if !defined(CONFIG_SPL_BUILD) board_ti_set_ethaddr(2); |