summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/arm/mach-uniphier/ph1-ld4/sbc_init.c11
-rw-r--r--arch/arm/mach-uniphier/ph1-pro4/sbc_init.c10
-rw-r--r--arch/arm/mach-uniphier/ph1-sld8/sbc_init.c28
3 files changed, 24 insertions, 25 deletions
diff --git a/arch/arm/mach-uniphier/ph1-ld4/sbc_init.c b/arch/arm/mach-uniphier/ph1-ld4/sbc_init.c
index f44195d..374a8c0 100644
--- a/arch/arm/mach-uniphier/ph1-ld4/sbc_init.c
+++ b/arch/arm/mach-uniphier/ph1-ld4/sbc_init.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2011-2014 Panasonic Corporation
+ * Copyright (C) 2011-2015 Panasonic Corporation
* Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
*
* SPDX-License-Identifier: GPL-2.0+
@@ -25,13 +25,12 @@ void sbc_init(void)
writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL12);
writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL14);
-#if !defined(CONFIG_SPL_BUILD)
/* XECS0: boot/sub memory (boot swap = off/on) */
writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL00);
writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL01);
writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL02);
writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL04);
-#endif
+
/* XECS3: peripherals */
writel(SBCTRL0_SAVEPIN_PERI_VALUE, SBCTRL30);
writel(SBCTRL1_SAVEPIN_PERI_VALUE, SBCTRL31);
@@ -43,9 +42,9 @@ void sbc_init(void)
writel(0x0400bc01, SBBASE1);
writel(0x0800bf01, SBBASE3);
-#if !defined(CONFIG_SPL_BUILD)
/* enable access to sub memory when boot swap is on */
- sg_set_pinsel(155, 1); /* PORT24 -> XECS0 */
-#endif
+ if (boot_is_swapped())
+ sg_set_pinsel(155, 1); /* PORT24 -> XECS0 */
+
sg_set_pinsel(156, 1); /* PORT25 -> XECS3 */
}
diff --git a/arch/arm/mach-uniphier/ph1-pro4/sbc_init.c b/arch/arm/mach-uniphier/ph1-pro4/sbc_init.c
index 6940559..4cc5e75 100644
--- a/arch/arm/mach-uniphier/ph1-pro4/sbc_init.c
+++ b/arch/arm/mach-uniphier/ph1-pro4/sbc_init.c
@@ -42,13 +42,12 @@ void sbc_init(void)
writel(0x0200be01, SBBASE1);
}
#elif defined(CONFIG_DCC_MICRO_SUPPORT_CARD)
-#if !defined(CONFIG_SPL_BUILD)
/* XECS0: boot/sub memory (boot swap = off/on) */
writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL00);
writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL01);
writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL02);
writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL04);
-#endif
+
/* XECS1: sub/boot memory (boot swap = off/on) */
writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL10);
writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL11);
@@ -65,9 +64,10 @@ void sbc_init(void)
writel(0x0400bc01, SBBASE1); /* sub memory */
writel(0x0800bf01, SBBASE3); /* peripherals */
-#if !defined(CONFIG_SPL_BUILD)
- sg_set_pinsel(318, 5); /* PORT22 -> XECS0 */
-#endif
+ /* enable access to sub memory when boot swap is on */
+ if (boot_is_swapped())
+ sg_set_pinsel(318, 5); /* PORT22 -> XECS0 */
+
sg_set_pinsel(313, 5); /* PORT15 -> XECS3 */
writel(0x00000001, SG_LOADPINCTRL);
diff --git a/arch/arm/mach-uniphier/ph1-sld8/sbc_init.c b/arch/arm/mach-uniphier/ph1-sld8/sbc_init.c
index febd0e4..fdef88e 100644
--- a/arch/arm/mach-uniphier/ph1-sld8/sbc_init.c
+++ b/arch/arm/mach-uniphier/ph1-sld8/sbc_init.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2011-2014 Panasonic Corporation
+ * Copyright (C) 2011-2015 Panasonic Corporation
* Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
*
* SPDX-License-Identifier: GPL-2.0+
@@ -19,18 +19,18 @@ void sbc_init(void)
tmp &= 0xfffffcff;
writel(tmp, PC0CTRL);
-#if !defined(CONFIG_SPL_BUILD)
- /* XECS0 : dummy */
- writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL00);
- writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL01);
- writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL02);
- writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL04);
-#endif
- /* XECS1 : boot memory (always boot swap = on) */
- writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL10);
- writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL11);
- writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL12);
- writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL14);
+ /*
+ * SBCTRL0* does not need settings because PH1-sLD8 has no support for
+ * XECS0. The boot swap must be enabled to boot from the support card.
+ */
+
+ if (boot_is_swapped()) {
+ /* XECS1 : boot memory if boot swap is on */
+ writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL10);
+ writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL11);
+ writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL12);
+ writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL14);
+ }
/* XECS4 : sub memory */
writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL40);
@@ -54,5 +54,5 @@ void sbc_init(void)
sg_set_pinsel(135, 16); /* XIRQ7 -> XECS5 */
/* dummy read to assure write process */
- readl(SG_PINCTRL(33));
+ readl(SG_PINCTRL(0));
}