diff options
822 files changed, 31871 insertions, 19282 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 4756f14d..e2a4ba9 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -427,12 +427,19 @@ Heiko Schocher <hs@denx.de> ids8247 MPC8247 jupiter MPC5200 kmeter1 MPC8360 + kmsupx5 MPC8321 mgcoge MPC8247 + mgcoge2ne MPC8247 + mgcoge2un ARM926EJS (Kirkwood SoC) mucmc52 MPC5200 muas3001 MPC8270 municse MPC5200 sc3 PPC405GP suen3 ARM926EJS (Kirkwood SoC) + suen8 ARM926EJS (Kirkwood SoC) + suvd3 MPC8321 + tuda1 MPC8321 + tuxa1 MPC8321 uc101 MPC5200 ve8313 MPC8313 @@ -547,7 +554,7 @@ Unknown / orphaned boards: # Board CPU # ######################################################################### -Albert ARIBAUD <albert.aribaud@free.fr> +Albert ARIBAUD <albert.u.boot@aribaud.net> edminiv2 ARM926EJS (Orion5x SoC) @@ -599,6 +606,10 @@ Rick Bronson <rick@efn.org> AT91RM9200DK at91rm9200 +Luca Ceresoli <luca.ceresoli@comelit.it> + + dig297 ARM ARMV7 (OMAP3530 SoC) + Po-Yu Chuang <ratbert@faraday-tech.com> a320evb FA526 (ARM920T-like) (a320 SoC) @@ -624,7 +635,7 @@ Kristoffer Ericson <kristoffer.ericson@gmail.com> jornada SA1110 -Fabio Estevam <Fabio.Estevam@freescale.com> +Fabio Estevam <fabio.estevam@freescale.com> mx31pdk i.MX31 @@ -646,6 +657,10 @@ Marius Gröger <mag@sysgo.de> impa7 ARM720T (EP7211) ep7312 ARM720T (EP7312) +Igor Grinberg <grinberg@compulab.co.il> + + cm-t35 ARM ARMV7 (OMAP3xx Soc) + Kshitij Gupta <kshitij@ti.com> omap1510inn ARM925T @@ -726,6 +741,10 @@ Eric Millbrandt <emillbrandt@dekaresearch.com> galaxy5200 mpc5200 +Nagendra T S <nagendra@mistralsolutions.com> + + am3517_crane ARM ARMV7 (AM35x SoC) + Rolf Offermanns <rof@sysgo.de> shannon SA1100 @@ -763,10 +782,6 @@ Stelian Pop <stelian.pop@leadtechdesign.com> at91sam9263ek ARM926EJS (AT91SAM9263 SoC) at91sam9rlek ARM926EJS (AT91SAM9RL SoC) -Mike Rapoport <mike@compulab.co.il> - - cm_t35 ARM ARMV7 (OMAP3xx SoC) - Tom Rix <Tom.Rix@windriver.com> omap3_zoom2 ARM ARMV7 (OMAP3xx SoC) @@ -905,9 +920,9 @@ Unknown / orphaned boards: # Board CPU # ######################################################################### -Daniel Engström <daniel@omicron.se> +Graeme Russ <graeme.russ@gmail.com> - sc520_cdp x86 + eNET AMD SC520 ######################################################################### # MIPS Systems: # @@ -919,7 +934,6 @@ Daniel Engström <daniel@omicron.se> Wolfgang Denk <wd@denx.de> incaip MIPS32 4Kc - purple MIPS64 5Kc Thomas Lange <thomas@corelatus.se> dbau1x00 MIPS32 Au1000 @@ -1059,6 +1073,7 @@ Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Mike Frysinger <vapier@gentoo.org> Blackfin Team <u-boot-devel@blackfin.uclinux.org> + BF506F-EZKIT BF506 BF518F-EZBRD BF518 BF526-EZBRD BF526 BF527-AD7160-EVAL BF527 @@ -1073,6 +1088,10 @@ Blackfin Team <u-boot-devel@blackfin.uclinux.org> BF548-EZKIT BF548 BF561-EZKIT BF561 +M.Hasewinkel (MHA) <info@ssv-embedded.de> + + dnp5370 BF537 + Brent Kandetzki <brentk@teleco.com> IP04 BF532 @@ -1113,6 +1132,11 @@ Anton Shurpin <shurpin.aa@niistt.ru> BF561-ACVILON BF561 +Haitao Zhang <hzhang@ucrobotics.com> +Chong Huang <chuang@ucrobotics.com> + + bf525-ucr2 BF525 + ######################################################################### # End of MAINTAINERS list # ######################################################################### @@ -418,9 +418,11 @@ LIST_ARM11=" \ ## ARMV7 Systems ######################################################################### LIST_ARMV7=" \ + am3517_crane \ am3517_evm \ ca9x4_ct_vxp \ devkit8000 \ + dig297 \ igep0020 \ igep0030 \ mx51evk \ @@ -507,9 +509,7 @@ LIST_mips4kc=" \ vct_premium_onenand_small \ " -LIST_mips5kc=" \ - purple \ -" +LIST_mips5kc="" LIST_au1xx0=" \ dbau1000 \ @@ -546,10 +546,10 @@ LIST_mips_el=" \ " ######################################################################### -## i386 Systems +## x86 Systems ######################################################################### -LIST_x86="$(boards_by_arch i386)" +LIST_x86="$(boards_by_arch x86)" ######################################################################### ## Nios-II Systems @@ -34,7 +34,7 @@ TIMESTAMP_FILE = $(obj)include/timestamp_autogenerated.h VERSION_FILE = $(obj)include/version_autogenerated.h HOSTARCH := $(shell uname -m | \ - sed -e s/i.86/i386/ \ + sed -e s/i.86/x86/ \ -e s/sun4u/sparc64/ \ -e s/arm.*/arm/ \ -e s/sa110/arm/ \ @@ -167,7 +167,7 @@ include $(TOPDIR)/config.mk # U-Boot objects....order is important (i.e. start must be first) OBJS = $(CPUDIR)/start.o -ifeq ($(CPU),i386) +ifeq ($(CPU),x86) OBJS += $(CPUDIR)/start16.o OBJS += $(CPUDIR)/resetvec.o endif @@ -183,6 +183,7 @@ OBJS := $(addprefix $(obj),$(OBJS)) LIBS = lib/libgeneric.o LIBS += lib/lzma/liblzma.o LIBS += lib/lzo/liblzo.o +LIBS += lib/zlib/libz.o LIBS += $(shell if [ -f board/$(VENDOR)/common/Makefile ]; then echo \ "board/$(VENDOR)/common/lib$(VENDOR).o"; fi) LIBS += $(CPUDIR)/lib$(CPU).o @@ -352,7 +353,7 @@ $(obj)u-boot.img: $(obj)u-boot.bin -d $< $@ $(obj)u-boot.imx: $(obj)u-boot.bin - $(obj)tools/mkimage -n $(IMX_CONFIG) -T imximage \ + $(obj)tools/mkimage -n $(CONFIG_IMX_CONFIG) -T imximage \ -e $(CONFIG_SYS_TEXT_BASE) -d $< $@ $(obj)u-boot.kwb: $(obj)u-boot.bin @@ -413,8 +414,12 @@ $(obj)u-boot-onenand.bin: onenand_ipl $(obj)u-boot.bin cat $(ONENAND_BIN) $(obj)u-boot.bin > $(obj)u-boot-onenand.bin $(VERSION_FILE): - @( printf '#define U_BOOT_VERSION "U-Boot %s%s"\n' "$(U_BOOT_VERSION)" \ - '$(shell $(TOPDIR)/tools/setlocalversion $(TOPDIR))' ) > $@.tmp + @( localvers='$(shell $(TOPDIR)/tools/setlocalversion $(TOPDIR))' ; \ + printf '#define PLAIN_VERSION "%s%s"\n' \ + "$(U_BOOT_VERSION)" "$${localvers}" ; \ + printf '#define U_BOOT_VERSION "U-Boot %s%s"\n' \ + "$(U_BOOT_VERSION)" "$${localvers}" ; \ + ) > $@.tmp @( printf '#define CC_VERSION_STRING "%s"\n' \ '$(shell $(CC) --version | head -n 1)' )>> $@.tmp @( printf '#define LD_VERSION_STRING "%s"\n' \ @@ -749,16 +754,6 @@ M5485HFE_config : unconfig #======================================================================== ######################################################################### -## Atmel AT91RM9200 Systems -######################################################################### - -CPUAT91_RAM_config \ -CPUAT91_config : unconfig - @mkdir -p $(obj)include - @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h - @$(MKCONFIG) -n $@ -a cpuat91 arm arm920t cpuat91 eukrea at91 - -######################################################################### ## ARM926EJ-S Systems ######################################################################### @@ -929,15 +924,6 @@ cp922_XA10_config \ cp1026_config: unconfig @board/armltd/integrator/split_by_variant.sh cp $@ -nhk8815_config \ -nhk8815_onenand_config: unconfig - @mkdir -p $(obj)include - @ > $(obj)include/config.h - @if [ "$(findstring _onenand, $@)" ] ; then \ - echo "#define CONFIG_BOOT_ONENAND" >> $(obj)include/config.h; \ - fi - @$(MKCONFIG) -n $@ -a nhk8815 arm arm926ejs nhk8815 st nomadik - xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$(subst _config,,$1)))) omap1610inn_config \ @@ -164,7 +164,7 @@ Directory Hierarchy: /blackfin Files generic to Analog Devices Blackfin architecture /cpu CPU specific files /lib Architecture specific library files - /i386 Files generic to i386 architecture + /x86 Files generic to x86 architecture /cpu CPU specific files /lib Architecture specific library files /m68k Files generic to m68k architecture @@ -356,6 +356,13 @@ The following options need to be configured: Define this option if you want to enable the ICache only when Code runs from RAM. +- 85xx CPU Options: + CONFIG_SYS_FSL_TBCLK_DIV + + Defines the core time base clock divider ratio compared to the + system clock. On most PQ3 devices this is 8, on newer QorIQ + devices it can be 16 or 32. The ratio varies from SoC to Soc. + - Intel Monahans options: CONFIG_SYS_MONAHANS_RUN_MODE_OSC_RATIO @@ -625,6 +632,7 @@ The following options need to be configured: CONFIG_CMD_BOOTD bootd CONFIG_CMD_CACHE * icache, dcache CONFIG_CMD_CONSOLE coninfo + CONFIG_CMD_CRC32 * crc32 CONFIG_CMD_DATE * support for RTC, date/time... CONFIG_CMD_DHCP * DHCP support CONFIG_CMD_DIAG * Diagnostics @@ -637,22 +645,27 @@ The following options need to be configured: CONFIG_CMD_EDITENV edit env variable CONFIG_CMD_EEPROM * EEPROM read/write support CONFIG_CMD_ELF * bootelf, bootvx + CONFIG_CMD_EXPORTENV * export the environment CONFIG_CMD_SAVEENV saveenv CONFIG_CMD_FDC * Floppy Disk Support CONFIG_CMD_FAT * FAT partition support CONFIG_CMD_FDOS * Dos diskette Support CONFIG_CMD_FLASH flinfo, erase, protect CONFIG_CMD_FPGA FPGA device initialization support + CONFIG_CMD_GO * the 'go' command (exec code) + CONFIG_CMD_GREPENV * search environment CONFIG_CMD_HWFLOW * RTS/CTS hw flow control CONFIG_CMD_I2C * I2C serial bus support CONFIG_CMD_IDE * IDE harddisk support CONFIG_CMD_IMI iminfo CONFIG_CMD_IMLS List all found images CONFIG_CMD_IMMAP * IMMR dump support + CONFIG_CMD_IMPORTENV * import an environment CONFIG_CMD_IRQ * irqinfo CONFIG_CMD_ITEST Integer/string test of 2 values CONFIG_CMD_JFFS2 * JFFS2 Support CONFIG_CMD_KGDB * kgdb + CONFIG_CMD_LDRINFO ldrinfo (display Blackfin loader) CONFIG_CMD_LOADB loadb CONFIG_CMD_LOADS loads CONFIG_CMD_MD5SUM print md5 message digest @@ -743,6 +756,8 @@ The following options need to be configured: CONFIG_RTC_ISL1208 - use Intersil ISL1208 RTC CONFIG_RTC_MAX6900 - use Maxim, Inc. MAX6900 RTC CONFIG_SYS_RTC_DS1337_NOOSC - Turn off the OSC output for DS1337 + CONFIG_SYS_RV3029_TCR - enable trickle charger on + RV3029 RTC. Note that if the RTC uses I2C, then the I2C interface must also be configured. See I2C Support, below. @@ -1074,6 +1089,25 @@ The following options need to be configured: and 16bpp modes defined by CONFIG_VIDEO_SED13806_8BPP or CONFIG_VIDEO_SED13806_16BPP + CONFIG_FSL_DIU_FB + Enable the Freescale DIU video driver. Reference boards for + SOCs that have a DIU should define this macro to enable DIU + support, and should also define these other macros: + + CONFIG_SYS_DIU_ADDR + CONFIG_VIDEO + CONFIG_CMD_BMP + CONFIG_CFB_CONSOLE + CONFIG_VIDEO_SW_CURSOR + CONFIG_VGA_AS_SINGLE_DEVICE + CONFIG_VIDEO_LOGO + CONFIG_VIDEO_BMP_LOGO + + The DIU driver will look for the 'video-mode' environment + variable, and if defined, enable the DIU as a console during + boot. See the documentation file README.video for a + description of this variable. + - Keyboard Support: CONFIG_KEYBOARD @@ -1974,6 +2008,28 @@ The following options need to be configured: example, some LED's) on your board. At the moment, the following checkpoints are implemented: +- Standalone program support: + CONFIG_STANDALONE_LOAD_ADDR + + This option allows to define board specific values + for the address where standalone program gets loaded, + thus overwriting the architecutre dependent default + settings. + +- Frame Buffer Address: + CONFIG_FB_ADDR + + Define CONFIG_FB_ADDR if you want to use specific address for + frame buffer. + Then system will reserve the frame buffer address to defined address + instead of lcd_setmem (this function grab the memory for frame buffer + by panel's size). + + Please see board_init_f function. + + If you want this config option then, + please define it at your board config file + Legacy uImage format: Arg Where When @@ -2311,7 +2367,10 @@ Configuration Settings: used) must be put below this limit, unless "bootm_low" enviroment variable is defined and non-zero. In such case all data for the Linux kernel must be between "bootm_low" - and "bootm_low" + CONFIG_SYS_BOOTMAPSZ. + and "bootm_low" + CONFIG_SYS_BOOTMAPSZ. The environment + variable "bootm_mapsize" will override the value of + CONFIG_SYS_BOOTMAPSZ. If CONFIG_SYS_BOOTMAPSZ is undefined, + then the value in "bootm_size" will be used instead. - CONFIG_SYS_BOOT_RAMDISK_HIGH: Enable initrd_high functionality. If defined then the @@ -2699,6 +2758,14 @@ Low Level (hardware related) configuration options: source code. It is used to make hardware dependant initializations. +- CONFIG_IDE_AHB: + Most IDE controllers were designed to be connected with PCI + interface. Only few of them were designed for AHB interface. + When software is doing ATA command and data transfer to + IDE devices through IDE-AHB controller, some additional + registers accessing to these kind of IDE-AHB controller + is requierd. + - CONFIG_SYS_IMMR: Physical address of the Internal Memory. DO NOT CHANGE unless you know exactly what you're doing! (11-4) [MPC8xx/82xx systems only] @@ -2907,6 +2974,12 @@ Low Level (hardware related) configuration options: that is executed before the actual U-Boot. E.g. when compiling a NAND SPL. +- CONFIG_USE_ARCH_MEMCPY + CONFIG_USE_ARCH_MEMSET + If these options are used a optimized version of memcpy/memset will + be used if available. These functions may be faster under some + conditions but may increase the binary size. + Building the Software: ====================== @@ -3147,7 +3220,16 @@ List of environment variables (most likely not complete): for use by the bootm command. See also "bootm_size" environment variable. Address defined by "bootm_low" is also the base of the initial memory mapping for the Linux - kernel -- see the description of CONFIG_SYS_BOOTMAPSZ. + kernel -- see the description of CONFIG_SYS_BOOTMAPSZ and + bootm_mapsize. + + bootm_mapsize - Size of the initial memory mapping for the Linux kernel. + This variable is given as a hexadecimal number and it + defines the size of the memory region starting at base + address bootm_low that is accessible by the Linux kernel + during early boot. If unset, CONFIG_SYS_BOOTMAPSZ is used + as the default value if it is defined, and bootm_size is + used otherwise. bootm_size - Memory range available for image processing in the bootm command can be restricted. This variable is given as diff --git a/arch/arm/config.mk b/arch/arm/config.mk index a6a4742..ec1b420 100644 --- a/arch/arm/config.mk +++ b/arch/arm/config.mk @@ -23,13 +23,11 @@ CROSS_COMPILE ?= arm-linux- -ifeq ($(BOARD),omap2420h4) -STANDALONE_LOAD_ADDR = 0x80300000 -else +ifndef CONFIG_STANDALONE_LOAD_ADDR ifeq ($(SOC),omap3) -STANDALONE_LOAD_ADDR = 0x80300000 +CONFIG_STANDALONE_LOAD_ADDR = 0x80300000 else -STANDALONE_LOAD_ADDR = 0xc100000 +CONFIG_STANDALONE_LOAD_ADDR = 0xc100000 endif endif @@ -63,7 +61,6 @@ ifeq (,$(findstring arch/arm/lib/eabi_compat.o,$(PLATFORM_LIBS))) PLATFORM_LIBS += $(OBJTREE)/arch/arm/lib/eabi_compat.o endif endif -LDSCRIPT := $(SRCTREE)/$(CPUDIR)/u-boot.lds # needed for relocation ifndef CONFIG_NAND_SPL diff --git a/arch/arm/cpu/arm1136/mx31/devices.c b/arch/arm/cpu/arm1136/mx31/devices.c index 1f4ca7e..1e7d48f 100644 --- a/arch/arm/cpu/arm1136/mx31/devices.c +++ b/arch/arm/cpu/arm1136/mx31/devices.c @@ -24,8 +24,8 @@ */ #include <common.h> -#include <asm/arch/mx31-regs.h> -#include <asm/arch/mx31.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/clock.h> #ifdef CONFIG_SYS_MX31_UART1 void mx31_uart1_hw_init(void) diff --git a/arch/arm/cpu/arm1136/mx31/generic.c b/arch/arm/cpu/arm1136/mx31/generic.c index 8bd23ee..18572b9 100644 --- a/arch/arm/cpu/arm1136/mx31/generic.c +++ b/arch/arm/cpu/arm1136/mx31/generic.c @@ -22,7 +22,7 @@ */ #include <common.h> -#include <asm/arch/mx31-regs.h> +#include <asm/arch/imx-regs.h> #include <asm/io.h> static u32 mx31_decode_pll(u32 reg, u32 infreq) @@ -106,11 +106,64 @@ void mx31_set_pad(enum iomux_pins pin, u32 config) } +struct mx3_cpu_type mx31_cpu_type[] = { + { .srev = 0x00, .v = "1.0" }, + { .srev = 0x10, .v = "1.1" }, + { .srev = 0x11, .v = "1.1" }, + { .srev = 0x12, .v = "1.15" }, + { .srev = 0x13, .v = "1.15" }, + { .srev = 0x14, .v = "1.2" }, + { .srev = 0x15, .v = "1.2" }, + { .srev = 0x28, .v = "2.0" }, + { .srev = 0x29, .v = "2.0" }, +}; + +char *get_cpu_rev(void) +{ + u32 i, srev; + + /* read SREV register from IIM module */ + struct iim_regs *iim = (struct iim_regs *)MX31_IIM_BASE_ADDR; + srev = readl(&iim->iim_srev); + + for (i = 0; i < ARRAY_SIZE(mx31_cpu_type); i++) + if (srev == mx31_cpu_type[i].srev) + return mx31_cpu_type[i].v; + return "unknown"; +} + +char *get_reset_cause(void) +{ + /* read RCSR register from CCM module */ + struct clock_control_regs *ccm = + (struct clock_control_regs *)CCM_BASE; + + u32 cause = readl(&ccm->rcsr) & 0x07; + + switch (cause) { + case 0x0000: + return "POR"; + break; + case 0x0001: + return "RST"; + break; + case 0x0002: + return "WDOG"; + break; + case 0x0006: + return "JTAG"; + break; + default: + return "unknown reset"; + } +} + #if defined(CONFIG_DISPLAY_CPUINFO) int print_cpuinfo (void) { - printf("CPU: Freescale i.MX31 at %d MHz\n", - mx31_get_mcu_main_clk() / 1000000); + printf("CPU: Freescale i.MX31 rev %s at %d MHz.", + get_cpu_rev(), mx31_get_mcu_main_clk() / 1000000); + printf("Reset cause: %s\n", get_reset_cause()); return 0; } #endif diff --git a/arch/arm/cpu/arm1136/mx31/timer.c b/arch/arm/cpu/arm1136/mx31/timer.c index f6be3b9..c4bc3b3 100644 --- a/arch/arm/cpu/arm1136/mx31/timer.c +++ b/arch/arm/cpu/arm1136/mx31/timer.c @@ -22,8 +22,10 @@ */ #include <common.h> -#include <asm/arch/mx31-regs.h> +#include <asm/arch/imx-regs.h> #include <div64.h> +#include <watchdog.h> +#include <asm/io.h> #define TIMER_BASE 0x53f90000 /* General purpose timer 1 */ @@ -165,5 +167,39 @@ void __udelay (unsigned long usec) void reset_cpu (ulong addr) { - __REG16(WDOG_BASE) = 4; + struct wdog_regs *wdog = (struct wdog_regs *)WDOG_BASE; + wdog->wcr = WDOG_ENABLE; + while (1) + ; } + +#ifdef CONFIG_HW_WATCHDOG +void mxc_hw_watchdog_enable(void) +{ + struct wdog_regs *wdog = (struct wdog_regs *)WDOG_BASE; + u16 secs; + + /* + * The timer watchdog can be set between + * 0.5 and 128 Seconds. If not defined + * in configuration file, sets 64 Seconds + */ +#ifdef CONFIG_SYS_WD_TIMER_SECS + secs = (CONFIG_SYS_WD_TIMER_SECS << 1) & 0xFF; + if (!secs) secs = 1; +#else + secs = 64; +#endif + writew(readw(&wdog->wcr) | (secs << WDOG_WT_SHIFT) | WDOG_ENABLE, + &wdog->wcr); +} + + +void mxc_hw_watchdog_reset(void) +{ + struct wdog_regs *wdog = (struct wdog_regs *)WDOG_BASE; + + writew(0x5555, &wdog->wsr); + writew(0xAAAA, &wdog->wsr); +} +#endif diff --git a/arch/arm/cpu/arm920t/a320/Makefile b/arch/arm/cpu/arm920t/a320/Makefile index 31da706..50eb265 100644 --- a/arch/arm/cpu/arm920t/a320/Makefile +++ b/arch/arm/cpu/arm920t/a320/Makefile @@ -27,7 +27,6 @@ LIB = $(obj)lib$(SOC).o SOBJS += reset.o COBJS += timer.o -COBJS += ftsmc020.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) diff --git a/arch/arm/cpu/arm920t/a320/timer.c b/arch/arm/cpu/arm920t/a320/timer.c index d2e316f..95cb8fd 100644 --- a/arch/arm/cpu/arm920t/a320/timer.c +++ b/arch/arm/cpu/arm920t/a320/timer.c @@ -19,21 +19,19 @@ #include <common.h> #include <asm/io.h> -#include <asm/arch/ftpmu010.h> -#include <asm/arch/fttmr010.h> +#include <faraday/ftpmu010.h> +#include <faraday/fttmr010.h> static ulong timestamp; static ulong lastdec; static struct fttmr010 *tmr = (struct fttmr010 *)CONFIG_FTTMR010_BASE; -static struct ftpmu010 *pmu = (struct ftpmu010 *)CONFIG_FTPMU010_BASE; #define TIMER_CLOCK 32768 #define TIMER_LOAD_VAL 0xffffffff int timer_init(void) { - unsigned int oscc; unsigned int cr; debug("%s()\n", __func__); @@ -41,23 +39,8 @@ int timer_init(void) /* disable timers */ writel(0, &tmr->cr); - /* - * use 32768Hz oscillator for RTC, WDT, TIMER - */ - - /* enable the 32768Hz oscillator */ - oscc = readl(&pmu->OSCC); - oscc &= ~(FTPMU010_OSCC_OSCL_OFF | FTPMU010_OSCC_OSCL_TRI); - writel(oscc, &pmu->OSCC); - - /* wait until ready */ - while (!(readl(&pmu->OSCC) & FTPMU010_OSCC_OSCL_STABLE)) - ; - - /* select 32768Hz oscillator */ - oscc = readl(&pmu->OSCC); - oscc |= FTPMU010_OSCC_OSCL_RTCLSEL; - writel(oscc, &pmu->OSCC); + /* use 32768Hz oscillator for RTC, WDT, TIMER */ + ftpmu010_32768osc_enable(); /* setup timer */ writel(TIMER_LOAD_VAL, &tmr->timer3_load); diff --git a/arch/arm/cpu/arm920t/at91rm9200/ether.c b/arch/arm/cpu/arm920t/at91rm9200/ether.c index e1cdeba..d7135c5 100644 --- a/arch/arm/cpu/arm920t/at91rm9200/ether.c +++ b/arch/arm/cpu/arm920t/at91rm9200/ether.c @@ -39,7 +39,7 @@ typedef struct { #define RBF_MULTICAST (1<<30) #define RBF_UNICAST (1<<29) #define RBF_EXTERNAL (1<<28) -#define RBF_UNKOWN (1<<27) +#define RBF_UNKNOWN (1<<27) #define RBF_SIZE 0x07ff #define RBF_LOCAL4 (1<<26) #define RBF_LOCAL3 (1<<25) diff --git a/arch/arm/cpu/arm926ejs/armada100/cpu.c b/arch/arm/cpu/arm926ejs/armada100/cpu.c index 62aa175..c21938e 100644 --- a/arch/arm/cpu/arm926ejs/armada100/cpu.c +++ b/arch/arm/cpu/arm926ejs/armada100/cpu.c @@ -62,6 +62,16 @@ int arch_cpu_init(void) /* Enable GPIO clock */ writel(APBC_APBCLK, &apb1clkres->gpio); +#ifdef CONFIG_I2C_MV + /* Enable general I2C clock */ + writel(APBC_RST | APBC_FNCLK | APBC_APBCLK, &apb1clkres->twsi0); + writel(APBC_FNCLK | APBC_APBCLK, &apb1clkres->twsi0); + + /* Enable power I2C clock */ + writel(APBC_RST | APBC_FNCLK | APBC_APBCLK, &apb1clkres->twsi1); + writel(APBC_FNCLK | APBC_APBCLK, &apb1clkres->twsi1); +#endif + /* * Enable Functional and APB clock at 14.7456MHz * for configured UART console @@ -90,3 +100,9 @@ int print_cpuinfo(void) return 0; } #endif + +#ifdef CONFIG_I2C_MV +void i2c_clk_enable(void) +{ +} +#endif diff --git a/arch/arm/cpu/arm926ejs/mx25/generic.c b/arch/arm/cpu/arm926ejs/mx25/generic.c index c6e1146..76e4b5c 100644 --- a/arch/arm/cpu/arm926ejs/mx25/generic.c +++ b/arch/arm/cpu/arm926ejs/mx25/generic.c @@ -145,7 +145,7 @@ int cpu_mmc_init (bd_t * bis) } #ifdef CONFIG_MXC_UART -void mx25_uart_init_pins (void) +void mx25_uart1_init_pins(void) { struct iomuxc_mux_ctl *muxctl; struct iomuxc_pad_ctl *padctl; diff --git a/arch/arm/cpu/arm926ejs/orion5x/Makefile b/arch/arm/cpu/arm926ejs/orion5x/Makefile index e5a9994..a4298b4 100644 --- a/arch/arm/cpu/arm926ejs/orion5x/Makefile +++ b/arch/arm/cpu/arm926ejs/orion5x/Makefile @@ -1,5 +1,5 @@ # -# Copyright (C) 2010 Albert ARIBAUD <albert.aribaud@free.fr> +# Copyright (C) 2010 Albert ARIBAUD <albert.u.boot@aribaud.net> # # Based on original Kirkwood support which is # (C) Copyright 2009 diff --git a/arch/arm/cpu/arm926ejs/orion5x/cpu.c b/arch/arm/cpu/arm926ejs/orion5x/cpu.c index 1894b52..05bd45c 100644 --- a/arch/arm/cpu/arm926ejs/orion5x/cpu.c +++ b/arch/arm/cpu/arm926ejs/orion5x/cpu.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2010 Albert ARIBAUD <albert.aribaud@free.fr> + * Copyright (C) 2010 Albert ARIBAUD <albert.u.boot@aribaud.net> * * Based on original Kirkwood support which is * (C) Copyright 2009 diff --git a/arch/arm/cpu/arm926ejs/orion5x/dram.c b/arch/arm/cpu/arm926ejs/orion5x/dram.c index b749282..3e1ff7d 100644 --- a/arch/arm/cpu/arm926ejs/orion5x/dram.c +++ b/arch/arm/cpu/arm926ejs/orion5x/dram.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2010 Albert ARIBAUD <albert.aribaud@free.fr> + * Copyright (C) 2010 Albert ARIBAUD <albert.u.boot@aribaud.net> * * Based on original Kirkwood support which is * (C) Copyright 2009 @@ -38,7 +38,7 @@ u32 orion5x_sdram_bar(enum memory_bank bank) { struct orion5x_ddr_addr_decode_registers *winregs = (struct orion5x_ddr_addr_decode_registers *) - ORION5X_CPU_WIN_BASE; + ORION5X_DRAM_BASE; u32 result = 0; u32 enable = 0x01 & winregs[bank].size; diff --git a/arch/arm/cpu/arm926ejs/orion5x/lowlevel_init.S b/arch/arm/cpu/arm926ejs/orion5x/lowlevel_init.S index 0523bd4..a2de3cf 100644 --- a/arch/arm/cpu/arm926ejs/orion5x/lowlevel_init.S +++ b/arch/arm/cpu/arm926ejs/orion5x/lowlevel_init.S @@ -1,5 +1,5 @@ /* - * Copyright (C) 2010 Albert ARIBAUD <albert.aribaud@free.fr> + * Copyright (C) 2010 Albert ARIBAUD <albert.u.boot@aribaud.net> * * (C) Copyright 2009 * Marvell Semiconductor <www.marvell.com> diff --git a/arch/arm/cpu/arm926ejs/orion5x/timer.c b/arch/arm/cpu/arm926ejs/orion5x/timer.c index bbab226..9d45260 100644 --- a/arch/arm/cpu/arm926ejs/orion5x/timer.c +++ b/arch/arm/cpu/arm926ejs/orion5x/timer.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2010 Albert ARIBAUD <albert.aribaud@free.fr> + * Copyright (C) 2010 Albert ARIBAUD <albert.u.boot@aribaud.net> * * Based on original Kirkwood support which is * Copyright (C) Marvell International Ltd. and its affiliates diff --git a/arch/arm/cpu/arm926ejs/pantheon/cpu.c b/arch/arm/cpu/arm926ejs/pantheon/cpu.c index 9ddc77c..8b2eafa 100644 --- a/arch/arm/cpu/arm926ejs/pantheon/cpu.c +++ b/arch/arm/cpu/arm926ejs/pantheon/cpu.c @@ -59,6 +59,12 @@ int arch_cpu_init(void) /* Enable GPIO clock */ writel(APBC_APBCLK, &apbclkres->gpio); +#ifdef CONFIG_I2C_MV + /* Enable I2C clock */ + writel(APBC_RST | APBC_FNCLK | APBC_APBCLK, &apbclkres->twsi); + writel(APBC_FNCLK | APBC_APBCLK, &apbclkres->twsi); +#endif + icache_enable(); return 0; @@ -76,3 +82,9 @@ int print_cpuinfo(void) return 0; } #endif + +#ifdef CONFIG_I2C_MV +void i2c_clk_enable(void) +{ +} +#endif diff --git a/arch/arm/cpu/arm926ejs/start.S b/arch/arm/cpu/arm926ejs/start.S index fefcfa2..0940937 100644 --- a/arch/arm/cpu/arm926ejs/start.S +++ b/arch/arm/cpu/arm926ejs/start.S @@ -10,7 +10,7 @@ * Copyright (c) 2002 Gary Jennejohn <garyj@denx.de> * Copyright (c) 2003 Richard Woodruff <r-woodruff2@ti.com> * Copyright (c) 2003 Kshitij <kshitij@ti.com> - * Copyright (c) 2010 Albert Aribaud <albert.aribaud@free.fr> + * Copyright (c) 2010 Albert Aribaud <albert.u.boot@aribaud.net> * * See file CREDITS for list of people who contributed to this * project. diff --git a/arch/arm/cpu/arm946es/start.S b/arch/arm/cpu/arm946es/start.S index 00914f4..0054b22 100644 --- a/arch/arm/cpu/arm946es/start.S +++ b/arch/arm/cpu/arm946es/start.S @@ -10,7 +10,7 @@ * Copyright (c) 2002 Gary Jennejohn <garyj@denx.de> * Copyright (c) 2003 Richard Woodruff <r-woodruff2@ti.com> * Copyright (c) 2003 Kshitij <kshitij@ti.com> - * Copyright (c) 2010 Albert Aribaud <albert.aribaud@free.fr> + * Copyright (c) 2010 Albert Aribaud <albert.u.boot@aribaud.net> * * See file CREDITS for list of people who contributed to this * project. diff --git a/arch/arm/cpu/armv7/mx5/soc.c b/arch/arm/cpu/armv7/mx5/soc.c index 09500b3..6f4e8db 100644 --- a/arch/arm/cpu/armv7/mx5/soc.c +++ b/arch/arm/cpu/armv7/mx5/soc.c @@ -77,6 +77,33 @@ u32 get_cpu_rev(void) return system_rev; } +static char *get_reset_cause(void) +{ + u32 cause; + struct src *src_regs = (struct src *)SRC_BASE_ADDR; + + cause = readl(&src_regs->srsr); + writel(cause, &src_regs->srsr); + + switch (cause) { + case 0x00001: + return "POR"; + case 0x00004: + return "CSU"; + case 0x00008: + return "IPP USER"; + case 0x00010: + return "WDOG"; + case 0x00020: + return "JTAG HIGH-Z"; + case 0x00040: + return "JTAG SW"; + case 0x10000: + return "WARM BOOT"; + default: + return "unknown reset"; + } +} #if defined(CONFIG_DISPLAY_CPUINFO) int print_cpuinfo(void) @@ -89,6 +116,7 @@ int print_cpuinfo(void) (cpurev & 0x000F0) >> 4, (cpurev & 0x0000F) >> 0, mxc_get_clock(MXC_ARM_CLK) / 1000000); + printf("Reset cause: %s\n", get_reset_cause()); return 0; } #endif diff --git a/arch/arm/cpu/armv7/omap3/clock.c b/arch/arm/cpu/armv7/omap3/clock.c index 2238c52..3d38d08 100644 --- a/arch/arm/cpu/armv7/omap3/clock.c +++ b/arch/arm/cpu/armv7/omap3/clock.c @@ -278,6 +278,25 @@ static void dpll4_init_34xx(u32 sil_index, u32 clk_index) wait_on_value(ST_PERIPH_CLK, 2, &prcm_base->idlest_ckgen, LDELAY); } +static void dpll5_init_34xx(u32 sil_index, u32 clk_index) +{ + struct prcm *prcm_base = (struct prcm *)PRCM_BASE; + dpll_param *ptr = (dpll_param *) get_per2_dpll_param(); + + /* Moving it to the right sysclk base */ + ptr = ptr + clk_index; + + /* PER2 DPLL (DPLL5) */ + sr32(&prcm_base->clken2_pll, 0, 3, PLL_STOP); + wait_on_value(1, 0, &prcm_base->idlest2_ckgen, LDELAY); + sr32(&prcm_base->clksel5_pll, 0, 5, ptr->m2); /* set M2 (usbtll_fck) */ + sr32(&prcm_base->clksel4_pll, 8, 11, ptr->m); /* set m (11-bit multiplier) */ + sr32(&prcm_base->clksel4_pll, 0, 7, ptr->n); /* set n (7-bit divider)*/ + sr32(&prcm_base->clken_pll, 4, 4, ptr->fsel); /* FREQSEL */ + sr32(&prcm_base->clken2_pll, 0, 3, PLL_LOCK); /* lock mode */ + wait_on_value(1, 1, &prcm_base->idlest2_ckgen, LDELAY); +} + static void mpu_init_34xx(u32 sil_index, u32 clk_index) { struct prcm *prcm_base = (struct prcm *)PRCM_BASE; @@ -587,6 +606,7 @@ void prcm_init(void) dpll3_init_34xx(sil_index, clk_index); dpll4_init_34xx(sil_index, clk_index); + dpll5_init_34xx(sil_index, clk_index); iva_init_34xx(sil_index, clk_index); mpu_init_34xx(sil_index, clk_index); diff --git a/arch/arm/cpu/armv7/omap3/lowlevel_init.S b/arch/arm/cpu/armv7/omap3/lowlevel_init.S index 109481e..1458072 100644 --- a/arch/arm/cpu/armv7/omap3/lowlevel_init.S +++ b/arch/arm/cpu/armv7/omap3/lowlevel_init.S @@ -360,6 +360,28 @@ get_per_dpll_param: adr r0, per_dpll_param mov pc, lr +/* PER2 DPLL values */ +per2_dpll_param: +/* 12MHz */ +.word PER2_M_12, PER2_N_12, PER2_FSEL_12, PER2_M2_12 + +/* 13MHz */ +.word PER2_M_13, PER2_N_13, PER2_FSEL_13, PER2_M2_13 + +/* 19.2MHz */ +.word PER2_M_19P2, PER2_N_19P2, PER2_FSEL_19P2, PER2_M2_19P2 + +/* 26MHz */ +.word PER2_M_26, PER2_N_26, PER2_FSEL_26, PER2_M2_26 + +/* 38.4MHz */ +.word PER2_M_38P4, PER2_N_38P4, PER2_FSEL_38P4, PER2_M2_38P4 + +.globl get_per2_dpll_param +get_per2_dpll_param: + adr r0, per2_dpll_param + mov pc, lr + /* * Tables for 36XX/37XX devices * diff --git a/arch/arm/cpu/armv7/omap3/mem.c b/arch/arm/cpu/armv7/omap3/mem.c index bd914b0..a01c303 100644 --- a/arch/arm/cpu/armv7/omap3/mem.c +++ b/arch/arm/cpu/armv7/omap3/mem.c @@ -31,16 +31,6 @@ #include <asm/arch/sys_proto.h> #include <command.h> -/* - * Only One NAND allowed on board at a time. - * The GPMC CS Base for the same - */ -unsigned int boot_flash_base; -unsigned int boot_flash_off; -unsigned int boot_flash_sec; -unsigned int boot_flash_type; -volatile unsigned int boot_flash_env_addr; - struct gpmc *gpmc_cfg; #if defined(CONFIG_CMD_NAND) @@ -134,10 +124,6 @@ void gpmc_init(void) const u32 *gpmc_config = NULL; u32 base = 0; u32 size = 0; -#if defined(CONFIG_ENV_IS_IN_NAND) || defined(CONFIG_ENV_IS_IN_ONENAND) - u32 f_off = CONFIG_SYS_MONITOR_LEN; - u32 f_sec = 0; -#endif #endif u32 config = 0; @@ -162,15 +148,6 @@ void gpmc_init(void) base = PISMO1_NAND_BASE; size = PISMO1_NAND_SIZE; enable_gpmc_cs_config(gpmc_config, &gpmc_cfg->cs[0], base, size); -#if defined(CONFIG_ENV_IS_IN_NAND) - f_off = SMNAND_ENV_OFFSET; - f_sec = (128 << 10); /* 128 KiB */ - /* env setup */ - boot_flash_base = base; - boot_flash_off = f_off; - boot_flash_sec = f_sec; - boot_flash_env_addr = f_off; -#endif #endif #if defined(CONFIG_CMD_ONENAND) @@ -178,14 +155,5 @@ void gpmc_init(void) base = PISMO1_ONEN_BASE; size = PISMO1_ONEN_SIZE; enable_gpmc_cs_config(gpmc_config, &gpmc_cfg->cs[0], base, size); -#if defined(CONFIG_ENV_IS_IN_ONENAND) - f_off = ONENAND_ENV_OFFSET; - f_sec = (128 << 10); /* 128 KiB */ - /* env setup */ - boot_flash_base = base; - boot_flash_off = f_off; - boot_flash_sec = f_sec; - boot_flash_env_addr = f_off; -#endif #endif } diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S index d83d501..2929fc7 100644 --- a/arch/arm/cpu/armv7/start.S +++ b/arch/arm/cpu/armv7/start.S @@ -70,6 +70,18 @@ _end_vect: _TEXT_BASE: .word CONFIG_SYS_TEXT_BASE +#ifdef CONFIG_TEGRA2 +/* + * Tegra2 uses 2 separate CPUs - the AVP (ARM7TDMI) and the CPU (dual A9s). + * U-Boot runs on the AVP first, setting things up for the CPU (PLLs, + * muxes, clocks, clamps, etc.). Then the AVP halts, and expects the CPU + * to pick up its reset vector, which points here. + */ +.globl _armboot_start +_armboot_start: + .word _start +#endif + /* * These are defined in the board-specific linker script. */ @@ -115,7 +127,7 @@ reset: orr r0, r0, #0xd3 msr cpsr,r0 -#if (CONFIG_OMAP34XX) +#if defined(CONFIG_OMAP34XX) /* Copy vectors to mask ROM indirect addr */ adr r0, _start @ r0 <- current position of code add r0, r0, #4 @ skip reset vector diff --git a/arch/arm/cpu/armv7/tegra2/Makefile b/arch/arm/cpu/armv7/tegra2/Makefile index 687c887..f1ea915 100644 --- a/arch/arm/cpu/armv7/tegra2/Makefile +++ b/arch/arm/cpu/armv7/tegra2/Makefile @@ -28,7 +28,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(SOC).o SOBJS := lowlevel_init.o -COBJS := board.o sys_info.o timer.o +COBJS := ap20.o board.o sys_info.o timer.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) diff --git a/arch/arm/cpu/armv7/tegra2/ap20.c b/arch/arm/cpu/armv7/tegra2/ap20.c new file mode 100644 index 0000000..60dd5df --- /dev/null +++ b/arch/arm/cpu/armv7/tegra2/ap20.c @@ -0,0 +1,358 @@ +/* +* (C) Copyright 2010-2011 +* NVIDIA Corporation <www.nvidia.com> +* +* See file CREDITS for list of people who contributed to this +* project. +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation; either version 2 of +* the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, +* MA 02111-1307 USA +*/ + +#include "ap20.h" +#include <asm/io.h> +#include <asm/arch/tegra2.h> +#include <asm/arch/clk_rst.h> +#include <asm/arch/pmc.h> +#include <asm/arch/pinmux.h> +#include <asm/arch/scu.h> +#include <common.h> + +u32 s_first_boot = 1; + +void init_pllx(void) +{ + struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; + u32 reg; + + /* If PLLX is already enabled, just return */ + reg = readl(&clkrst->crc_pllx_base); + if (reg & PLL_ENABLE) + return; + + /* Set PLLX_MISC */ + reg = CPCON; /* CPCON[11:8] = 0001 */ + writel(reg, &clkrst->crc_pllx_misc); + + /* Use 12MHz clock here */ + reg = (PLL_BYPASS | PLL_DIVM); + reg |= (1000 << 8); /* DIVN = 0x3E8 */ + writel(reg, &clkrst->crc_pllx_base); + + reg |= PLL_ENABLE; + writel(reg, &clkrst->crc_pllx_base); + + reg &= ~PLL_BYPASS; + writel(reg, &clkrst->crc_pllx_base); +} + +static void enable_cpu_clock(int enable) +{ + struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; + u32 reg, clk; + + /* + * NOTE: + * Regardless of whether the request is to enable or disable the CPU + * clock, every processor in the CPU complex except the master (CPU 0) + * will have it's clock stopped because the AVP only talks to the + * master. The AVP does not know (nor does it need to know) that there + * are multiple processors in the CPU complex. + */ + + if (enable) { + /* Initialize PLLX */ + init_pllx(); + + /* Wait until all clocks are stable */ + udelay(PLL_STABILIZATION_DELAY); + + writel(CCLK_BURST_POLICY, &clkrst->crc_cclk_brst_pol); + writel(SUPER_CCLK_DIVIDER, &clkrst->crc_super_cclk_div); + } + + /* Fetch the register containing the main CPU complex clock enable */ + reg = readl(&clkrst->crc_clk_out_enb_l); + reg |= CLK_ENB_CPU; + + /* + * Read the register containing the individual CPU clock enables and + * always stop the clock to CPU 1. + */ + clk = readl(&clkrst->crc_clk_cpu_cmplx); + clk |= CPU1_CLK_STP; + + if (enable) { + /* Unstop the CPU clock */ + clk &= ~CPU0_CLK_STP; + } else { + /* Stop the CPU clock */ + clk |= CPU0_CLK_STP; + } + + writel(clk, &clkrst->crc_clk_cpu_cmplx); + writel(reg, &clkrst->crc_clk_out_enb_l); +} + +static int is_cpu_powered(void) +{ + struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE; + + return (readl(&pmc->pmc_pwrgate_status) & CPU_PWRED) ? 1 : 0; +} + +static void remove_cpu_io_clamps(void) +{ + struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE; + u32 reg; + + /* Remove the clamps on the CPU I/O signals */ + reg = readl(&pmc->pmc_remove_clamping); + reg |= CPU_CLMP; + writel(reg, &pmc->pmc_remove_clamping); + + /* Give I/O signals time to stabilize */ + udelay(IO_STABILIZATION_DELAY); +} + +static void powerup_cpu(void) +{ + struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE; + u32 reg; + int timeout = IO_STABILIZATION_DELAY; + + if (!is_cpu_powered()) { + /* Toggle the CPU power state (OFF -> ON) */ + reg = readl(&pmc->pmc_pwrgate_toggle); + reg &= PARTID_CP; + reg |= START_CP; + writel(reg, &pmc->pmc_pwrgate_toggle); + + /* Wait for the power to come up */ + while (!is_cpu_powered()) { + if (timeout-- == 0) + printf("CPU failed to power up!\n"); + else + udelay(10); + } + + /* + * Remove the I/O clamps from CPU power partition. + * Recommended only on a Warm boot, if the CPU partition gets + * power gated. Shouldn't cause any harm when called after a + * cold boot according to HW, probably just redundant. + */ + remove_cpu_io_clamps(); + } +} + +static void enable_cpu_power_rail(void) +{ + struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE; + u32 reg; + + reg = readl(&pmc->pmc_cntrl); + reg |= CPUPWRREQ_OE; + writel(reg, &pmc->pmc_cntrl); + + /* + * The TI PMU65861C needs a 3.75ms delay between enabling + * the power rail and enabling the CPU clock. This delay + * between SM1EN and SM1 is for switching time + the ramp + * up of the voltage to the CPU (VDD_CPU from PMU). + */ + udelay(3750); +} + +static void reset_A9_cpu(int reset) +{ + struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; + u32 reg, cpu; + + /* + * NOTE: Regardless of whether the request is to hold the CPU in reset + * or take it out of reset, every processor in the CPU complex + * except the master (CPU 0) will be held in reset because the + * AVP only talks to the master. The AVP does not know that there + * are multiple processors in the CPU complex. + */ + + /* Hold CPU 1 in reset */ + cpu = SET_DBGRESET1 | SET_DERESET1 | SET_CPURESET1; + writel(cpu, &clkrst->crc_cpu_cmplx_set); + + reg = readl(&clkrst->crc_rst_dev_l); + if (reset) { + /* Now place CPU0 into reset */ + cpu |= SET_DBGRESET0 | SET_DERESET0 | SET_CPURESET0; + writel(cpu, &clkrst->crc_cpu_cmplx_set); + + /* Enable master CPU reset */ + reg |= SWR_CPU_RST; + } else { + /* Take CPU0 out of reset */ + cpu = CLR_DBGRESET0 | CLR_DERESET0 | CLR_CPURESET0; + writel(cpu, &clkrst->crc_cpu_cmplx_clr); + + /* Disable master CPU reset */ + reg &= ~SWR_CPU_RST; + } + + writel(reg, &clkrst->crc_rst_dev_l); +} + +static void clock_enable_coresight(int enable) +{ + struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; + u32 rst, clk, src; + + rst = readl(&clkrst->crc_rst_dev_u); + clk = readl(&clkrst->crc_clk_out_enb_u); + + if (enable) { + rst &= ~SWR_CSITE_RST; + clk |= CLK_ENB_CSITE; + } else { + rst |= SWR_CSITE_RST; + clk &= ~CLK_ENB_CSITE; + } + + writel(clk, &clkrst->crc_clk_out_enb_u); + writel(rst, &clkrst->crc_rst_dev_u); + + if (enable) { + /* + * Put CoreSight on PLLP_OUT0 (216 MHz) and divide it down by + * 1.5, giving an effective frequency of 144MHz. + * Set PLLP_OUT0 [bits31:30 = 00], and use a 7.1 divisor + * (bits 7:0), so 00000001b == 1.5 (n+1 + .5) + */ + src = CLK_DIVIDER(NVBL_PLLP_KHZ, 144000); + writel(src, &clkrst->crc_clk_src_csite); + + /* Unlock the CPU CoreSight interfaces */ + rst = 0xC5ACCE55; + writel(rst, CSITE_CPU_DBG0_LAR); + writel(rst, CSITE_CPU_DBG1_LAR); + } +} + +void start_cpu(u32 reset_vector) +{ + /* Enable VDD_CPU */ + enable_cpu_power_rail(); + + /* Hold the CPUs in reset */ + reset_A9_cpu(1); + + /* Disable the CPU clock */ + enable_cpu_clock(0); + + /* Enable CoreSight */ + clock_enable_coresight(1); + + /* + * Set the entry point for CPU execution from reset, + * if it's a non-zero value. + */ + if (reset_vector) + writel(reset_vector, EXCEP_VECTOR_CPU_RESET_VECTOR); + + /* Enable the CPU clock */ + enable_cpu_clock(1); + + /* If the CPU doesn't already have power, power it up */ + powerup_cpu(); + + /* Take the CPU out of reset */ + reset_A9_cpu(0); +} + + +void halt_avp(void) +{ + for (;;) { + writel((HALT_COP_EVENT_JTAG | HALT_COP_EVENT_IRQ_1 \ + | HALT_COP_EVENT_FIQ_1 | (FLOW_MODE_STOP<<29)), + FLOW_CTLR_HALT_COP_EVENTS); + } +} + +void enable_scu(void) +{ + struct scu_ctlr *scu = (struct scu_ctlr *)NV_PA_ARM_PERIPHBASE; + u32 reg; + + /* If SCU already setup/enabled, return */ + if (readl(&scu->scu_ctrl) & SCU_CTRL_ENABLE) + return; + + /* Invalidate all ways for all processors */ + writel(0xFFFF, &scu->scu_inv_all); + + /* Enable SCU - bit 0 */ + reg = readl(&scu->scu_ctrl); + reg |= SCU_CTRL_ENABLE; + writel(reg, &scu->scu_ctrl); +} + +void init_pmc_scratch(void) +{ + struct pmc_ctlr *const pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE; + int i; + + /* SCRATCH0 is initialized by the boot ROM and shouldn't be cleared */ + for (i = 0; i < 23; i++) + writel(0, &pmc->pmc_scratch1+i); + + /* ODMDATA is for kernel use to determine RAM size, LP config, etc. */ + writel(CONFIG_SYS_BOARD_ODMDATA, &pmc->pmc_scratch20); +} + +void cpu_start(void) +{ + struct pmux_tri_ctlr *pmt = (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; + + /* enable JTAG */ + writel(0xC0, &pmt->pmt_cfg_ctl); + + if (s_first_boot) { + /* + * Need to set this before cold-booting, + * otherwise we'll end up in an infinite loop. + */ + s_first_boot = 0; + cold_boot(); + } +} + +void tegra2_start() +{ + if (s_first_boot) { + /* Init Debug UART Port (115200 8n1) */ + uart_init(); + + /* Init PMC scratch memory */ + init_pmc_scratch(); + } + +#ifdef CONFIG_ENABLE_CORTEXA9 + /* take the mpcore out of reset */ + cpu_start(); + + /* configure cache */ + cache_configure(); +#endif +} diff --git a/arch/arm/cpu/armv7/tegra2/ap20.h b/arch/arm/cpu/armv7/tegra2/ap20.h new file mode 100644 index 0000000..49fe340 --- /dev/null +++ b/arch/arm/cpu/armv7/tegra2/ap20.h @@ -0,0 +1,104 @@ +/* + * (C) Copyright 2010-2011 + * NVIDIA Corporation <www.nvidia.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <asm/types.h> + +/* Stabilization delays, in usec */ +#define PLL_STABILIZATION_DELAY (300) +#define IO_STABILIZATION_DELAY (1000) + +#define NVBL_PLLP_KHZ (216000) + +#define PLLX_ENABLED (1 << 30) +#define CCLK_BURST_POLICY 0x20008888 +#define SUPER_CCLK_DIVIDER 0x80000000 + +/* Calculate clock fractional divider value from ref and target frequencies */ +#define CLK_DIVIDER(REF, FREQ) ((((REF) * 2) / FREQ) - 2) + +/* Calculate clock frequency value from reference and clock divider value */ +#define CLK_FREQUENCY(REF, REG) (((REF) * 2) / (REG + 2)) + +/* AVP/CPU ID */ +#define PG_UP_TAG_0_PID_CPU 0x55555555 /* CPU aka "a9" aka "mpcore" */ +#define PG_UP_TAG_0 0x0 + +#define CORESIGHT_UNLOCK 0xC5ACCE55; + +/* AP20-Specific Base Addresses */ + +/* AP20 Base physical address of SDRAM. */ +#define AP20_BASE_PA_SDRAM 0x00000000 +/* AP20 Base physical address of internal SRAM. */ +#define AP20_BASE_PA_SRAM 0x40000000 +/* AP20 Size of internal SRAM (256KB). */ +#define AP20_BASE_PA_SRAM_SIZE 0x00040000 +/* AP20 Base physical address of flash. */ +#define AP20_BASE_PA_NOR_FLASH 0xD0000000 +/* AP20 Base physical address of boot information table. */ +#define AP20_BASE_PA_BOOT_INFO AP20_BASE_PA_SRAM + +/* + * Super-temporary stacks for EXTREMELY early startup. The values chosen for + * these addresses must be valid on ALL SOCs because this value is used before + * we are able to differentiate between the SOC types. + * + * NOTE: The since CPU's stack will eventually be moved from IRAM to SDRAM, its + * stack is placed below the AVP stack. Once the CPU stack has been moved, + * the AVP is free to use the IRAM the CPU stack previously occupied if + * it should need to do so. + * + * NOTE: In multi-processor CPU complex configurations, each processor will have + * its own stack of size CPU_EARLY_BOOT_STACK_SIZE. CPU 0 will have a + * limit of CPU_EARLY_BOOT_STACK_LIMIT. Each successive CPU will have a + * stack limit that is CPU_EARLY_BOOT_STACK_SIZE less then the previous + * CPU. + */ + +/* Common AVP early boot stack limit */ +#define AVP_EARLY_BOOT_STACK_LIMIT \ + (AP20_BASE_PA_SRAM + (AP20_BASE_PA_SRAM_SIZE/2)) +/* Common AVP early boot stack size */ +#define AVP_EARLY_BOOT_STACK_SIZE 0x1000 +/* Common CPU early boot stack limit */ +#define CPU_EARLY_BOOT_STACK_LIMIT \ + (AVP_EARLY_BOOT_STACK_LIMIT - AVP_EARLY_BOOT_STACK_SIZE) +/* Common CPU early boot stack size */ +#define CPU_EARLY_BOOT_STACK_SIZE 0x1000 + +#define EXCEP_VECTOR_CPU_RESET_VECTOR (NV_PA_EVP_BASE + 0x100) +#define CSITE_CPU_DBG0_LAR (NV_PA_CSITE_BASE + 0x10FB0) +#define CSITE_CPU_DBG1_LAR (NV_PA_CSITE_BASE + 0x12FB0) + +#define FLOW_CTLR_HALT_COP_EVENTS (NV_PA_FLOW_BASE + 4) +#define FLOW_MODE_STOP 2 +#define HALT_COP_EVENT_JTAG (1 << 28) +#define HALT_COP_EVENT_IRQ_1 (1 << 11) +#define HALT_COP_EVENT_FIQ_1 (1 << 9) + +/* Prototypes */ + +void tegra2_start(void); +void uart_init(void); +void udelay(unsigned long); +void cold_boot(void); +void cache_configure(void); diff --git a/arch/arm/cpu/armv7/tegra2/lowlevel_init.S b/arch/arm/cpu/armv7/tegra2/lowlevel_init.S index 7f15746..f24a2ff 100644 --- a/arch/arm/cpu/armv7/tegra2/lowlevel_init.S +++ b/arch/arm/cpu/armv7/tegra2/lowlevel_init.S @@ -26,6 +26,7 @@ #include <config.h> #include <version.h> + _TEXT_BASE: .word CONFIG_SYS_TEXT_BASE @ sdram load addr from config file @@ -58,8 +59,101 @@ lowlevel_init: mov pc, lr @ back to arch calling code + +.globl startup_cpu +startup_cpu: + @ Initialize the AVP, clocks, and memory controller + @ SDRAM is guaranteed to be on at this point + + ldr r0, =cold_boot @ R0 = reset vector for CPU + bl start_cpu @ start the CPU + + @ Transfer control to the AVP code + bl halt_avp + + @ Should never get here +_loop_forever2: + b _loop_forever2 + +.globl cache_configure +cache_configure: + stmdb r13!,{r14} + @ invalidate instruction cache + mov r1, #0 + mcr p15, 0, r1, c7, c5, 0 + + @ invalidate the i&d tlb entries + mcr p15, 0, r1, c8, c5, 0 + mcr p15, 0, r1, c8, c6, 0 + + @ enable instruction cache + mrc p15, 0, r1, c1, c0, 0 + orr r1, r1, #(1<<12) + mcr p15, 0, r1, c1, c0, 0 + + bl enable_scu + + @ enable SMP mode and FW for CPU0, by writing to Auxiliary Ctl reg + mrc p15, 0, r0, c1, c0, 1 + orr r0, r0, #0x41 + mcr p15, 0, r0, c1, c0, 1 + + @ Now flush the Dcache + mov r0, #0 + @ 256 cache lines + mov r1, #256 + +invalidate_loop: + add r1, r1, #-1 + mov r0, r1, lsl #5 + @ invalidate d-cache using line (way0) + mcr p15, 0, r0, c7, c6, 2 + + orr r2, r0, #(1<<30) + @ invalidate d-cache using line (way1) + mcr p15, 0, r2, c7, c6, 2 + + orr r2, r0, #(2<<30) + @ invalidate d-cache using line (way2) + mcr p15, 0, r2, c7, c6, 2 + + orr r2, r0, #(3<<30) + @ invalidate d-cache using line (way3) + mcr p15, 0, r2, c7, c6, 2 + cmp r1, #0 + bne invalidate_loop + + @ FIXME: should have ap20's L2 disabled too? +invalidate_done: + ldmia r13!,{pc} + +.globl cold_boot +cold_boot: + msr cpsr_c, #0xD3 + @ Check current processor: CPU or AVP? + @ If CPU, go to CPU boot code, else continue on AVP path + + ldr r0, =NV_PA_PG_UP_BASE + ldr r1, [r0] + ldr r2, =PG_UP_TAG_AVP + + @ are we the CPU? + ldr sp, CPU_STACK + cmp r1, r2 + @ yep, we are the CPU + bne _armboot_start + + @ AVP initialization follows this path + ldr sp, AVP_STACK + @ Init AVP and start CPU + b startup_cpu + @ the literal pools origin .ltorg SRAM_STACK: .word LOW_LEVEL_SRAM_STACK +AVP_STACK: + .word EARLY_AVP_STACK +CPU_STACK: + .word EARLY_CPU_STACK diff --git a/arch/arm/cpu/pxa/Makefile b/arch/arm/cpu/pxa/Makefile index 49a6ed3..e8b59a3 100644 --- a/arch/arm/cpu/pxa/Makefile +++ b/arch/arm/cpu/pxa/Makefile @@ -28,7 +28,6 @@ LIB = $(obj)lib$(CPU).o START = start.o COBJS += cpu.o -COBJS += i2c.o COBJS += pxafb.o COBJS += timer.o COBJS += usb.o diff --git a/arch/arm/cpu/pxa/cpu.c b/arch/arm/cpu/pxa/cpu.c index 7d49cbb..9970a4b 100644 --- a/arch/arm/cpu/pxa/cpu.c +++ b/arch/arm/cpu/pxa/cpu.c @@ -318,3 +318,13 @@ int arch_cpu_init(void) pxa_clock_setup(); return 0; } + +void i2c_clk_enable(void) +{ + /* set the global I2C clock on */ +#ifdef CONFIG_CPU_MONAHANS + writel(readl(CKENB) | (CKENB_4_I2C), CKENB); +#else + writel(readl(CKEN) | CKEN14_I2C, CKEN); +#endif +} diff --git a/arch/arm/include/asm/arch-armada100/config.h b/arch/arm/include/asm/arch-armada100/config.h index d804002..1126b38 100644 --- a/arch/arm/include/asm/arch-armada100/config.h +++ b/arch/arm/include/asm/arch-armada100/config.h @@ -40,5 +40,17 @@ #define MV_UART_CONSOLE_BASE ARMD1_UART1_BASE #define CONFIG_SYS_NS16550_IER (1 << 6) /* Bit 6 in UART_IER register represents UART Unit Enable */ +/* + * I2C definition + */ +#ifdef CONFIG_CMD_I2C +#define CONFIG_I2C_MV 1 +#define CONFIG_MV_I2C_NUM 2 +#define CONFIG_I2C_MULTI_BUS 1 +#define CONFIG_MV_I2C_REG {0xd4011000, 0xd4025000} +#define CONFIG_HARD_I2C 1 +#define CONFIG_SYS_I2C_SPEED 0 +#define CONFIG_SYS_I2C_SLAVE 0xfe +#endif #endif /* _ARMD1_CONFIG_H */ diff --git a/arch/arm/include/asm/arch-armada100/mfp.h b/arch/arm/include/asm/arch-armada100/mfp.h index d21a79f..73783a7 100644 --- a/arch/arm/include/asm/arch-armada100/mfp.h +++ b/arch/arm/include/asm/arch-armada100/mfp.h @@ -37,28 +37,32 @@ * offset, pull,pF, drv,dF, edge,eF ,afn,aF */ /* UART1 */ -#define MFP107_UART1_TXD MFP_REG(0x01ac) | MFP_AF1 | MFP_DRIVE_FAST -#define MFP107_UART1_RXD MFP_REG(0x01ac) | MFP_AF2 | MFP_DRIVE_FAST -#define MFP108_UART1_RXD MFP_REG(0x01b0) | MFP_AF1 | MFP_DRIVE_FAST -#define MFP108_UART1_TXD MFP_REG(0x01b0) | MFP_AF2 | MFP_DRIVE_FAST -#define MFP109_UART1_CTS MFP_REG(0x01b4) | MFP_AF1 | MFP_DRIVE_MEDIUM -#define MFP109_UART1_RTS MFP_REG(0x01b4) | MFP_AF2 | MFP_DRIVE_MEDIUM -#define MFP110_UART1_RTS MFP_REG(0x01b8) | MFP_AF1 | MFP_DRIVE_MEDIUM -#define MFP110_UART1_CTS MFP_REG(0x01b8) | MFP_AF2 | MFP_DRIVE_MEDIUM -#define MFP111_UART1_RI MFP_REG(0x01bc) | MFP_AF1 | MFP_DRIVE_MEDIUM -#define MFP111_UART1_DSR MFP_REG(0x01bc) | MFP_AF2 | MFP_DRIVE_MEDIUM -#define MFP112_UART1_DTR MFP_REG(0x01c0) | MFP_AF1 | MFP_DRIVE_MEDIUM -#define MFP112_UART1_DCD MFP_REG(0x01c0) | MFP_AF2 | MFP_DRIVE_MEDIUM +#define MFP107_UART1_TXD (MFP_REG(0x01ac) | MFP_AF1 | MFP_DRIVE_FAST) +#define MFP107_UART1_RXD (MFP_REG(0x01ac) | MFP_AF2 | MFP_DRIVE_FAST) +#define MFP108_UART1_RXD (MFP_REG(0x01b0) | MFP_AF1 | MFP_DRIVE_FAST) +#define MFP108_UART1_TXD (MFP_REG(0x01b0) | MFP_AF2 | MFP_DRIVE_FAST) +#define MFP109_UART1_CTS (MFP_REG(0x01b4) | MFP_AF1 | MFP_DRIVE_MEDIUM) +#define MFP109_UART1_RTS (MFP_REG(0x01b4) | MFP_AF2 | MFP_DRIVE_MEDIUM) +#define MFP110_UART1_RTS (MFP_REG(0x01b8) | MFP_AF1 | MFP_DRIVE_MEDIUM) +#define MFP110_UART1_CTS (MFP_REG(0x01b8) | MFP_AF2 | MFP_DRIVE_MEDIUM) +#define MFP111_UART1_RI (MFP_REG(0x01bc) | MFP_AF1 | MFP_DRIVE_MEDIUM) +#define MFP111_UART1_DSR (MFP_REG(0x01bc) | MFP_AF2 | MFP_DRIVE_MEDIUM) +#define MFP112_UART1_DTR (MFP_REG(0x01c0) | MFP_AF1 | MFP_DRIVE_MEDIUM) +#define MFP112_UART1_DCD (MFP_REG(0x01c0) | MFP_AF2 | MFP_DRIVE_MEDIUM) /* UART2 */ -#define MFP47_UART2_RXD MFP_REG(0x0028) | MFP_AF6 | MFP_DRIVE_MEDIUM -#define MFP48_UART2_TXD MFP_REG(0x002c) | MFP_AF6 | MFP_DRIVE_MEDIUM -#define MFP88_UART2_RXD MFP_REG(0x0160) | MFP_AF2 | MFP_DRIVE_MEDIUM -#define MFP89_UART2_TXD MFP_REG(0x0164) | MFP_AF2 | MFP_DRIVE_MEDIUM +#define MFP47_UART2_RXD (MFP_REG(0x0028) | MFP_AF6 | MFP_DRIVE_MEDIUM) +#define MFP48_UART2_TXD (MFP_REG(0x002c) | MFP_AF6 | MFP_DRIVE_MEDIUM) +#define MFP88_UART2_RXD (MFP_REG(0x0160) | MFP_AF2 | MFP_DRIVE_MEDIUM) +#define MFP89_UART2_TXD (MFP_REG(0x0164) | MFP_AF2 | MFP_DRIVE_MEDIUM) /* UART3 */ -#define MFPO8_UART3_RXD MFP_REG(0x06c) | MFP_AF2 | MFP_DRIVE_MEDIUM -#define MFPO9_UART3_TXD MFP_REG(0x070) | MFP_AF2 | MFP_DRIVE_MEDIUM +#define MFPO8_UART3_RXD (MFP_REG(0x06c) | MFP_AF2 | MFP_DRIVE_MEDIUM) +#define MFPO9_UART3_TXD (MFP_REG(0x070) | MFP_AF2 | MFP_DRIVE_MEDIUM) + +/* I2c */ +#define MFP105_CI2C_SDA (MFP_REG(0x1a4) | MFP_AF1 | MFP_DRIVE_MEDIUM) +#define MFP106_CI2C_SCL (MFP_REG(0x1a8) | MFP_AF1 | MFP_DRIVE_MEDIUM) /* More macros can be defined here... */ diff --git a/arch/arm/include/asm/arch-mx31/mx31.h b/arch/arm/include/asm/arch-mx31/clock.h index a755212..8dc6e82 100644 --- a/arch/arm/include/asm/arch-mx31/mx31.h +++ b/arch/arm/include/asm/arch-mx31/clock.h @@ -21,8 +21,8 @@ * MA 02111-1307 USA */ -#ifndef __ASM_ARCH_MX31_H -#define __ASM_ARCH_MX31_H +#ifndef __ASM_ARCH_CLOCK_H +#define __ASM_ARCH_CLOCK_H extern u32 mx31_get_ipg_clk(void); #define imx_get_uartclk mx31_get_ipg_clk @@ -32,4 +32,4 @@ extern void mx31_set_pad(enum iomux_pins pin, u32 config); void mx31_uart1_hw_init(void); void mx31_spi2_hw_init(void); -#endif /* __ASM_ARCH_MX31_H */ +#endif /* __ASM_ARCH_CLOCK_H */ diff --git a/arch/arm/include/asm/arch-mx31/mx31-regs.h b/arch/arm/include/asm/arch-mx31/imx-regs.h index 105f7d8..c830a03 100644 --- a/arch/arm/include/asm/arch-mx31/mx31-regs.h +++ b/arch/arm/include/asm/arch-mx31/imx-regs.h @@ -21,8 +21,8 @@ * MA 02111-1307 USA */ -#ifndef __ASM_ARCH_MX31_REGS_H -#define __ASM_ARCH_MX31_REGS_H +#ifndef __ASM_ARCH_MX31_IMX_REGS_H +#define __ASM_ARCH_MX31_IMX_REGS_H #if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__)) #include <asm/types.h> @@ -75,6 +75,39 @@ struct cspi_regs { u32 test; }; +/* Watchdog Timer (WDOG) registers */ +#define WDOG_ENABLE (1 << 2) +#define WDOG_WT_SHIFT 8 +struct wdog_regs { + u16 wcr; /* Control */ + u16 wsr; /* Service */ + u16 wrsr; /* Reset Status */ +}; + +/* IIM Control Registers */ +struct iim_regs { + u32 iim_stat; + u32 iim_statm; + u32 iim_err; + u32 iim_emask; + u32 iim_fctl; + u32 iim_ua; + u32 iim_la; + u32 iim_sdat; + u32 iim_prev; + u32 iim_srev; + u32 iim_prog_p; + u32 iim_scs0; + u32 iim_scs1; + u32 iim_scs2; + u32 iim_scs3; +}; + +struct mx3_cpu_type { + u8 srev; + char *v; +}; + #define IOMUX_PADNUM_MASK 0x1ff #define IOMUX_PIN(gpionum, padnum) ((padnum) & IOMUX_PADNUM_MASK) @@ -470,6 +503,8 @@ enum iomux_pins { #define CCMR_FPM (1 << 1) #define CCMR_CKIH (2 << 1) +#define MX31_IIM_BASE_ADDR 0x5001C000 + #define PDR0_CSI_PODF(x) (((x) & 0x1ff) << 23) #define PDR0_PER_PODF(x) (((x) & 0x1f) << 16) #define PDR0_HSP_PODF(x) (((x) & 0x7) << 11) @@ -739,4 +774,4 @@ enum iomux_pins { #define MXC_EHCI_IPPUE_DOWN (1 << 8) #define MXC_EHCI_IPPUE_UP (1 << 9) -#endif /* __ASM_ARCH_MX31_REGS_H */ +#endif /* __ASM_ARCH_MX31_IMX_REGS_H */ diff --git a/arch/arm/include/asm/arch-omap3/clocks.h b/arch/arm/include/asm/arch-omap3/clocks.h index 40f80ba..bed0002 100644 --- a/arch/arm/include/asm/arch-omap3/clocks.h +++ b/arch/arm/include/asm/arch-omap3/clocks.h @@ -68,6 +68,7 @@ extern dpll_param *get_mpu_dpll_param(void); extern dpll_param *get_iva_dpll_param(void); extern dpll_param *get_core_dpll_param(void); extern dpll_param *get_per_dpll_param(void); +extern dpll_param *get_per2_dpll_param(void); extern dpll_param *get_36x_mpu_dpll_param(void); extern dpll_param *get_36x_iva_dpll_param(void); diff --git a/arch/arm/include/asm/arch-omap3/clocks_omap3.h b/arch/arm/include/asm/arch-omap3/clocks_omap3.h index 30ef690..ef600dd 100644 --- a/arch/arm/include/asm/arch-omap3/clocks_omap3.h +++ b/arch/arm/include/asm/arch-omap3/clocks_omap3.h @@ -282,6 +282,32 @@ #define PER_FSEL_38P4 0x07 #define PER_M2_38P4 0x09 +/* PER2 DPLL */ +#define PER2_M_12 0x78 +#define PER2_N_12 0x0B +#define PER2_FSEL_12 0x03 +#define PER2_M2_12 0x01 + +#define PER2_M_13 0x78 +#define PER2_N_13 0x0C +#define PER2_FSEL_13 0x03 +#define PER2_M2_13 0x01 + +#define PER2_M_19P2 0x2EE +#define PER2_N_19P2 0x0B +#define PER2_FSEL_19P2 0x06 +#define PER2_M2_19P2 0x0A + +#define PER2_M_26 0x78 +#define PER2_N_26 0x0C +#define PER2_FSEL_26 0x03 +#define PER2_M2_26 0x01 + +#define PER2_M_38P4 0x2EE +#define PER2_N_38P4 0x0B +#define PER2_FSEL_38P4 0x06 +#define PER2_M2_38P4 0x0A + /* 36XX PER DPLL */ #define PER_36XX_M_12 0x1B0 diff --git a/arch/arm/include/asm/arch-omap3/cpu.h b/arch/arm/include/asm/arch-omap3/cpu.h index 962d6d4..e944de7 100644 --- a/arch/arm/include/asm/arch-omap3/cpu.h +++ b/arch/arm/include/asm/arch-omap3/cpu.h @@ -347,10 +347,13 @@ struct prcm { u32 clksel2_pll_mpu; /* 0x944 */ u8 res6[0xb8]; u32 fclken1_core; /* 0xa00 */ - u8 res7[0xc]; + u32 res_fclken2_core; + u32 fclken3_core; /* 0xa08 */ + u8 res7[0x4]; u32 iclken1_core; /* 0xa10 */ u32 iclken2_core; /* 0xa14 */ - u8 res8[0x28]; + u32 iclken3_core; /* 0xa18 */ + u8 res8[0x24]; u32 clksel_core; /* 0xa40 */ u8 res9[0xbc]; u32 fclken_gfx; /* 0xb00 */ @@ -368,13 +371,17 @@ struct prcm { u32 clksel_wkup; /* 0xc40 */ u8 res16[0xbc]; u32 clken_pll; /* 0xd00 */ - u8 res17[0x1c]; + u32 clken2_pll; /* 0xd04 */ + u8 res17[0x18]; u32 idlest_ckgen; /* 0xd20 */ - u8 res18[0x1c]; + u32 idlest2_ckgen; /* 0xd24 */ + u8 res18[0x18]; u32 clksel1_pll; /* 0xd40 */ u32 clksel2_pll; /* 0xd44 */ u32 clksel3_pll; /* 0xd48 */ - u8 res19[0xb4]; + u32 clksel4_pll; /* 0xd4c */ + u32 clksel5_pll; /* 0xd50 */ + u8 res19[0xac]; u32 fclken_dss; /* 0xe00 */ u8 res20[0xc]; u32 iclken_dss; /* 0xe10 */ @@ -394,6 +401,10 @@ struct prcm { u32 clksel_per; /* 0x1040 */ u8 res28[0xfc]; u32 clksel1_emu; /* 0x1140 */ + u8 res29[0x2bc]; + u32 fclken_usbhost; /* 0x1400 */ + u8 res30[0xc]; + u32 iclken_usbhost; /* 0x1410 */ }; #else /* __ASSEMBLY__ */ #define CM_CLKSEL_CORE 0x48004a40 diff --git a/arch/arm/include/asm/arch-omap3/ehci_omap3.h b/arch/arm/include/asm/arch-omap3/ehci_omap3.h new file mode 100644 index 0000000..cd01f50 --- /dev/null +++ b/arch/arm/include/asm/arch-omap3/ehci_omap3.h @@ -0,0 +1,58 @@ +/* + * (C) Copyright 2011 + * Alexander Holler <holler@ahsoftware.de> + * + * Based on "drivers/usb/host/ehci-omap.c" from Linux 2.6.37 + * + * See there for additional Copyrights. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA + */ +#ifndef _EHCI_OMAP3_H_ +#define _EHCI_OMAP3_H_ + +/* USB/EHCI registers */ +#define OMAP3_USBTLL_BASE 0x48062000UL +#define OMAP3_UHH_BASE 0x48064000UL +#define OMAP3_EHCI_BASE 0x48064800UL + +/* TLL Register Set */ +#define OMAP_USBTLL_SYSCONFIG (0x10) +#define OMAP_USBTLL_SYSCONFIG_SOFTRESET (1 << 1) +#define OMAP_USBTLL_SYSCONFIG_ENAWAKEUP (1 << 2) +#define OMAP_USBTLL_SYSCONFIG_SIDLEMODE (1 << 3) +#define OMAP_USBTLL_SYSCONFIG_CACTIVITY (1 << 8) + +#define OMAP_USBTLL_SYSSTATUS (0x14) +#define OMAP_USBTLL_SYSSTATUS_RESETDONE (1 << 0) + +/* UHH Register Set */ +#define OMAP_UHH_SYSCONFIG (0x10) +#define OMAP_UHH_SYSCONFIG_SOFTRESET (1 << 1) +#define OMAP_UHH_SYSCONFIG_CACTIVITY (1 << 8) +#define OMAP_UHH_SYSCONFIG_SIDLEMODE (1 << 3) +#define OMAP_UHH_SYSCONFIG_ENAWAKEUP (1 << 2) +#define OMAP_UHH_SYSCONFIG_MIDLEMODE (1 << 12) + +#define OMAP_UHH_HOSTCONFIG (0x40) +#define OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN (1 << 2) +#define OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN (1 << 3) +#define OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN (1 << 4) + +#endif /* _EHCI_OMAP3_H_ */ diff --git a/arch/arm/include/asm/arch-omap3/omap3-regs.h b/arch/arm/include/asm/arch-omap3/omap3-regs.h new file mode 100644 index 0000000..818214f --- /dev/null +++ b/arch/arm/include/asm/arch-omap3/omap3-regs.h @@ -0,0 +1,95 @@ +/* + * (c) 2011 Comelit Group SpA, Luca Ceresoli <luca.ceresoli@comelit.it> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _OMAP3_REGS_H +#define _OMAP3_REGS_H + +/* + * Register definitions for OMAP3 processors. + */ + +/* + * GPMC_CONFIG1 - GPMC_CONFIG7 + */ + +/* Values for GPMC_CONFIG1 - signal control parameters */ +#define WRAPBURST (1 << 31) +#define READMULTIPLE (1 << 30) +#define READTYPE (1 << 29) +#define WRITEMULTIPLE (1 << 28) +#define WRITETYPE (1 << 27) +#define CLKACTIVATIONTIME(x) (((x) & 3) << 25) +#define ATTACHEDDEVICEPAGELENGTH(x) (((x) & 3) << 23) +#define WAITREADMONITORING (1 << 22) +#define WAITWRITEMONITORING (1 << 21) +#define WAITMONITORINGTIME(x) (((x) & 3) << 18) +#define WAITPINSELECT(x) (((x) & 3) << 16) +#define DEVICESIZE(x) (((x) & 3) << 12) +#define DEVICESIZE_8BIT DEVICESIZE(0) +#define DEVICESIZE_16BIT DEVICESIZE(1) +#define DEVICETYPE(x) (((x) & 3) << 10) +#define DEVICETYPE_NOR DEVICETYPE(0) +#define DEVICETYPE_NAND DEVICETYPE(2) +#define MUXADDDATA (1 << 9) +#define TIMEPARAGRANULARITY (1 << 4) +#define GPMCFCLKDIVIDER(x) (((x) & 3) << 0) + +/* Values for GPMC_CONFIG2 - CS timing */ +#define CSWROFFTIME(x) (((x) & 0x1f) << 16) +#define CSRDOFFTIME(x) (((x) & 0x1f) << 8) +#define CSEXTRADELAY (1 << 7) +#define CSONTIME(x) (((x) & 0xf) << 0) + +/* Values for GPMC_CONFIG3 - nADV timing */ +#define ADVWROFFTIME(x) (((x) & 0x1f) << 16) +#define ADVRDOFFTIME(x) (((x) & 0x1f) << 8) +#define ADVEXTRADELAY (1 << 7) +#define ADVONTIME(x) (((x) & 0xf) << 0) + +/* Values for GPMC_CONFIG4 - nWE and nOE timing */ +#define WEOFFTIME(x) (((x) & 0x1f) << 24) +#define WEEXTRADELAY (1 << 23) +#define WEONTIME(x) (((x) & 0xf) << 16) +#define OEOFFTIME(x) (((x) & 0x1f) << 8) +#define OEEXTRADELAY (1 << 7) +#define OEONTIME(x) (((x) & 0xf) << 0) + +/* Values for GPMC_CONFIG5 - RdAccessTime and CycleTime timing */ +#define PAGEBURSTACCESSTIME(x) (((x) & 0xf) << 24) +#define RDACCESSTIME(x) (((x) & 0x1f) << 16) +#define WRCYCLETIME(x) (((x) & 0x1f) << 8) +#define RDCYCLETIME(x) (((x) & 0x1f) << 0) + +/* Values for GPMC_CONFIG6 - misc timings */ +#define WRACCESSTIME(x) (((x) & 0x1f) << 24) +#define WRDATAONADMUXBUS(x) (((x) & 0xf) << 16) +#define CYCLE2CYCLEDELAY(x) (((x) & 0xf) << 8) +#define CYCLE2CYCLESAMECSEN (1 << 7) +#define CYCLE2CYCLEDIFFCSEN (1 << 6) +#define BUSTURNAROUND(x) (((x) & 0xf) << 0) + +/* Values for GPMC_CONFIG7 - CS address mapping configuration */ +#define MASKADDRESS(x) (((x) & 0xf) << 8) +#define CSVALID (1 << 6) +#define BASEADDRESS(x) (((x) & 0x3f) << 0) + +#endif /* _OMAP3_REGS_H */ diff --git a/arch/arm/include/asm/arch-omap3/omap3.h b/arch/arm/include/asm/arch-omap3/omap3.h index 3957c79..cc2b541 100644 --- a/arch/arm/include/asm/arch-omap3/omap3.h +++ b/arch/arm/include/asm/arch-omap3/omap3.h @@ -50,6 +50,20 @@ /* CONTROL */ #define OMAP34XX_CTRL_BASE (OMAP34XX_L4_IO_BASE + 0x2000) +#ifndef __ASSEMBLY__ +/* Signal Integrity Parameter Control Registers */ +struct control_prog_io { + unsigned char res[0x408]; + unsigned int io2; /* 0x408 */ + unsigned char res2[0x38]; + unsigned int io0; /* 0x444 */ + unsigned int io1; /* 0x448 */ +}; +#endif /* __ASSEMBLY__ */ + +/* Bit definition for CONTROL_PROG_IO1 */ +#define PRG_I2C2_PULLUPRESX 0x00000001 + /* UART */ #define OMAP34XX_UART1 (OMAP34XX_L4_IO_BASE + 0x6a000) #define OMAP34XX_UART2 (OMAP34XX_L4_IO_BASE + 0x6c000) diff --git a/arch/arm/include/asm/arch-orion5x/cpu.h b/arch/arm/include/asm/arch-orion5x/cpu.h index c84efaf..2f52ca8 100644 --- a/arch/arm/include/asm/arch-orion5x/cpu.h +++ b/arch/arm/include/asm/arch-orion5x/cpu.h @@ -1,5 +1,5 @@ /* - * Copyright (C) 2010 Albert ARIBAUD <albert.aribaud@free.fr> + * Copyright (C) 2010 Albert ARIBAUD <albert.u.boot@aribaud.net> * * Based on original Kirorion5x_ood support which is * (C) Copyright 2009 diff --git a/arch/arm/include/asm/arch-orion5x/mv88f5182.h b/arch/arm/include/asm/arch-orion5x/mv88f5182.h index 86ba08d..0b46aef 100644 --- a/arch/arm/include/asm/arch-orion5x/mv88f5182.h +++ b/arch/arm/include/asm/arch-orion5x/mv88f5182.h @@ -1,5 +1,5 @@ /* - * Copyright (C) 2010 Albert ARIBAUD <albert.aribaud@free.fr> + * Copyright (C) 2010 Albert ARIBAUD <albert.u.boot@aribaud.net> * * Based on original Kirkwood 88F6182 support which is * (C) Copyright 2009 diff --git a/arch/arm/include/asm/arch-orion5x/orion5x.h b/arch/arm/include/asm/arch-orion5x/orion5x.h index e3d3f76..9aeef88 100644 --- a/arch/arm/include/asm/arch-orion5x/orion5x.h +++ b/arch/arm/include/asm/arch-orion5x/orion5x.h @@ -1,5 +1,5 @@ /* - * Copyright (C) 2010 Albert ARIBAUD <albert.aribaud@free.fr> + * Copyright (C) 2010 Albert ARIBAUD <albert.u.boot@aribaud.net> * * Based on original Kirkwood support which is * (C) Copyright 2009 @@ -42,6 +42,7 @@ #define ORION5X_REGISTER(x) (ORION5X_REGS_PHY_BASE + x) /* Documented registers */ +#define ORION5X_DRAM_BASE (ORION5X_REGISTER(0x01500)) #define ORION5X_TWSI_BASE (ORION5X_REGISTER(0x11000)) #define ORION5X_UART0_BASE (ORION5X_REGISTER(0x12000)) #define ORION5X_UART1_BASE (ORION5X_REGISTER(0x12100)) diff --git a/arch/arm/include/asm/arch-pantheon/config.h b/arch/arm/include/asm/arch-pantheon/config.h index 710b386..5658592 100644 --- a/arch/arm/include/asm/arch-pantheon/config.h +++ b/arch/arm/include/asm/arch-pantheon/config.h @@ -34,5 +34,15 @@ #define MV_UART_CONSOLE_BASE PANTHEON_UART1_BASE #define CONFIG_SYS_NS16550_IER (1 << 6) /* Bit 6 in UART_IER register represents UART Unit Enable */ +/* + * I2C definition + */ +#ifdef CONFIG_CMD_I2C +#define CONFIG_I2C_MV 1 +#define CONFIG_MV_I2C_REG 0xd4011000 +#define CONFIG_HARD_I2C 1 +#define CONFIG_SYS_I2C_SPEED 0 +#define CONFIG_SYS_I2C_SLAVE 0xfe +#endif #endif /* _PANTHEON_CONFIG_H */ diff --git a/arch/arm/include/asm/arch-pantheon/cpu.h b/arch/arm/include/asm/arch-pantheon/cpu.h index 30f4393..60955c5 100644 --- a/arch/arm/include/asm/arch-pantheon/cpu.h +++ b/arch/arm/include/asm/arch-pantheon/cpu.h @@ -50,7 +50,9 @@ struct panthapb_registers { u32 uart0; /*0x000*/ u32 uart1; /*0x004*/ u32 gpio; /*0x008*/ - u8 pad0[0x034 - 0x08 - 4]; + u8 pad0[0x02c - 0x08 - 4]; + u32 twsi; /*0x02c*/ + u8 pad1[0x034 - 0x2c - 4]; u32 timers; /*0x034*/ }; diff --git a/arch/arm/include/asm/arch-pantheon/mfp.h b/arch/arm/include/asm/arch-pantheon/mfp.h index fb291cf..e939196 100644 --- a/arch/arm/include/asm/arch-pantheon/mfp.h +++ b/arch/arm/include/asm/arch-pantheon/mfp.h @@ -32,8 +32,10 @@ * offset, pull,pF, drv,dF, edge,eF ,afn,aF */ /* UART2 */ -#define MFP47_UART2_RXD MFP_REG(0x198) | MFP_AF6 | MFP_DRIVE_MEDIUM -#define MFP48_UART2_TXD MFP_REG(0x19c) | MFP_AF6 | MFP_DRIVE_MEDIUM +#define MFP47_UART2_RXD (MFP_REG(0x198) | MFP_AF6 | MFP_DRIVE_MEDIUM) +#define MFP48_UART2_TXD (MFP_REG(0x19c) | MFP_AF6 | MFP_DRIVE_MEDIUM) +#define MFP53_CI2C_SCL (MFP_REG(0x1b0) | MFP_AF2 | MFP_DRIVE_MEDIUM) +#define MFP54_CI2C_SDA (MFP_REG(0x1b4) | MFP_AF2 | MFP_DRIVE_MEDIUM) /* More macros can be defined here... */ diff --git a/arch/arm/include/asm/arch-pxa/pxa-regs.h b/arch/arm/include/asm/arch-pxa/pxa-regs.h index 65a387f..109fdc0 100644 --- a/arch/arm/include/asm/arch-pxa/pxa-regs.h +++ b/arch/arm/include/asm/arch-pxa/pxa-regs.h @@ -456,62 +456,6 @@ typedef void (*ExcpHndlr) (void) ; IrSR_XMITIR_IR_MODE) /* - * I2C registers - */ -#define IBMR 0x40301680 /* I2C Bus Monitor Register - IBMR */ -#define IDBR 0x40301688 /* I2C Data Buffer Register - IDBR */ -#define ICR 0x40301690 /* I2C Control Register - ICR */ -#define ISR 0x40301698 /* I2C Status Register - ISR */ -#define ISAR 0x403016A0 /* I2C Slave Address Register - ISAR */ - -#ifdef CONFIG_CPU_MONAHANS -#define PWRIBMR 0x40f500C0 /* Power I2C Bus Monitor Register-IBMR */ -#define PWRIDBR 0x40f500C4 /* Power I2C Data Buffer Register-IDBR */ -#define PWRICR 0x40f500C8 /* Power I2C Control Register - ICR */ -#define PWRISR 0x40f500CC /* Power I2C Status Register - ISR */ -#define PWRISAR 0x40f500D0 /* Power I2C Slave Address Register-ISAR */ -#else -#define PWRIBMR 0x40f00180 /* Power I2C Bus Monitor Register-IBMR */ -#define PWRIDBR 0x40f00188 /* Power I2C Data Buffer Register-IDBR */ -#define PWRICR 0x40f00190 /* Power I2C Control Register - ICR */ -#define PWRISR 0x40f00198 /* Power I2C Status Register - ISR */ -#define PWRISAR 0x40f001A0 /* Power I2C Slave Address Register-ISAR */ -#endif - -/* ----- Control register bits ---------------------------------------- */ - -#define ICR_START 0x1 /* start bit */ -#define ICR_STOP 0x2 /* stop bit */ -#define ICR_ACKNAK 0x4 /* send ACK(0) or NAK(1) */ -#define ICR_TB 0x8 /* transfer byte bit */ -#define ICR_MA 0x10 /* master abort */ -#define ICR_SCLE 0x20 /* master clock enable, mona SCLEA */ -#define ICR_IUE 0x40 /* unit enable */ -#define ICR_GCD 0x80 /* general call disable */ -#define ICR_ITEIE 0x100 /* enable tx interrupts */ -#define ICR_IRFIE 0x200 /* enable rx interrupts, mona: DRFIE */ -#define ICR_BEIE 0x400 /* enable bus error ints */ -#define ICR_SSDIE 0x800 /* slave STOP detected int enable */ -#define ICR_ALDIE 0x1000 /* enable arbitration interrupt */ -#define ICR_SADIE 0x2000 /* slave address detected int enable */ -#define ICR_UR 0x4000 /* unit reset */ -#define ICR_FM 0x8000 /* Fast Mode */ - -/* ----- Status register bits ----------------------------------------- */ - -#define ISR_RWM 0x1 /* read/write mode */ -#define ISR_ACKNAK 0x2 /* ack/nak status */ -#define ISR_UB 0x4 /* unit busy */ -#define ISR_IBB 0x8 /* bus busy */ -#define ISR_SSD 0x10 /* slave stop detected */ -#define ISR_ALD 0x20 /* arbitration loss detected */ -#define ISR_ITE 0x40 /* tx buffer empty */ -#define ISR_IRF 0x80 /* rx buffer full */ -#define ISR_GCAD 0x100 /* general call address detected */ -#define ISR_SAD 0x200 /* slave address detected */ -#define ISR_BED 0x400 /* bus error no ACK/NAK */ - -/* * Serial Audio Controller */ /* FIXME the audio defines collide w/ the SA1111 defines. I don't like these diff --git a/arch/arm/include/asm/arch-tegra2/clk_rst.h b/arch/arm/include/asm/arch-tegra2/clk_rst.h index 6d573bf..bd8ad2c 100644 --- a/arch/arm/include/asm/arch-tegra2/clk_rst.h +++ b/arch/arm/include/asm/arch-tegra2/clk_rst.h @@ -149,6 +149,9 @@ struct clk_rst_ctlr { uint crc_clk_src_csite; /*_CSITE_0, 0x1D4 */ uint crc_reserved19[9]; /* 0x1D8-1F8 */ uint crc_clk_src_osc; /*_OSC_0, 0x1FC */ + uint crc_reserved20[80]; /* 0x200-33C */ + uint crc_cpu_cmplx_set; /* _CPU_CMPLX_SET_0, 0x340 */ + uint crc_cpu_cmplx_clr; /* _CPU_CMPLX_CLR_0, 0x344 */ }; #define PLL_BYPASS (1 << 31) @@ -157,9 +160,35 @@ struct clk_rst_ctlr { #define PLL_DIVP (1 << 20) /* post divider, b22:20 */ #define PLL_DIVM 0x0C /* input divider, b4:0 */ -#define SWR_UARTD_RST (1 << 2) -#define CLK_ENB_UARTD (1 << 2) +#define SWR_UARTD_RST (1 << 1) +#define CLK_ENB_UARTD (1 << 1) #define SWR_UARTA_RST (1 << 6) #define CLK_ENB_UARTA (1 << 6) +#define SWR_CPU_RST (1 << 0) +#define CLK_ENB_CPU (1 << 0) +#define SWR_CSITE_RST (1 << 9) +#define CLK_ENB_CSITE (1 << 9) + +#define SET_CPURESET0 (1 << 0) +#define SET_DERESET0 (1 << 4) +#define SET_DBGRESET0 (1 << 12) + +#define SET_CPURESET1 (1 << 1) +#define SET_DERESET1 (1 << 5) +#define SET_DBGRESET1 (1 << 13) + +#define CLR_CPURESET0 (1 << 0) +#define CLR_DERESET0 (1 << 4) +#define CLR_DBGRESET0 (1 << 12) + +#define CLR_CPURESET1 (1 << 1) +#define CLR_DERESET1 (1 << 5) +#define CLR_DBGRESET1 (1 << 13) + +#define CPU0_CLK_STP (1 << 8) +#define CPU1_CLK_STP (1 << 9) + +#define CPCON (1 << 8) + #endif /* CLK_RST_H */ diff --git a/arch/arm/include/asm/arch-tegra2/gpio.h b/arch/arm/include/asm/arch-tegra2/gpio.h new file mode 100644 index 0000000..0fb8f0d --- /dev/null +++ b/arch/arm/include/asm/arch-tegra2/gpio.h @@ -0,0 +1,59 @@ +/* + * Copyright (c) 2011, Google Inc. All rights reserved. + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _TEGRA2_GPIO_H_ +#define _TEGRA2_GPIO_H_ + +/* + * The Tegra 2x GPIO controller has 222 GPIOs arranged in 8 banks of 4 ports, + * each with 8 GPIOs. + */ +#define TEGRA_GPIO_PORTS 4 /* The number of ports per bank */ +#define TEGRA_GPIO_BANKS 8 /* The number of banks */ + +/* GPIO Controller registers for a single bank */ +struct gpio_ctlr_bank { + uint gpio_config[TEGRA_GPIO_PORTS]; + uint gpio_dir_out[TEGRA_GPIO_PORTS]; + uint gpio_out[TEGRA_GPIO_PORTS]; + uint gpio_in[TEGRA_GPIO_PORTS]; + uint gpio_int_status[TEGRA_GPIO_PORTS]; + uint gpio_int_enable[TEGRA_GPIO_PORTS]; + uint gpio_int_level[TEGRA_GPIO_PORTS]; + uint gpio_int_clear[TEGRA_GPIO_PORTS]; +}; + +struct gpio_ctlr { + struct gpio_ctlr_bank gpio_bank[TEGRA_GPIO_BANKS]; +}; + +#define GPIO_BANK(x) ((x) >> 5) +#define GPIO_PORT(x) (((x) >> 3) & 0x3) +#define GPIO_BIT(x) ((x) & 0x7) + +/* + * GPIO_PI3 = Port I = 8, bit = 3. + * Seaboard: used for UART/SPI selection + * Harmony: not used + */ +#define GPIO_PI3 ((8 << 3) | 3) + +#endif /* TEGRA2_GPIO_H_ */ diff --git a/arch/arm/include/asm/arch-tegra2/pmc.h b/arch/arm/include/asm/arch-tegra2/pmc.h index 7ec9eeb..b1d47cd 100644 --- a/arch/arm/include/asm/arch-tegra2/pmc.h +++ b/arch/arm/include/asm/arch-tegra2/pmc.h @@ -121,4 +121,12 @@ struct pmc_ctlr { uint pmc_gate; /* _GATE_0, offset 15C */ }; +#define CPU_PWRED 1 +#define CPU_CLMP 1 + +#define PARTID_CP 0xFFFFFFF8 +#define START_CP (1 << 8) + +#define CPUPWRREQ_OE (1 << 16) + #endif /* PMC_H */ diff --git a/arch/arm/include/asm/arch-tegra2/scu.h b/arch/arm/include/asm/arch-tegra2/scu.h new file mode 100644 index 0000000..787ded0 --- /dev/null +++ b/arch/arm/include/asm/arch-tegra2/scu.h @@ -0,0 +1,43 @@ +/* + * (C) Copyright 2010,2011 + * NVIDIA Corporation <www.nvidia.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _SCU_H_ +#define _SCU_H_ + +/* ARM Snoop Control Unit (SCU) registers */ +struct scu_ctlr { + uint scu_ctrl; /* SCU Control Register, offset 00 */ + uint scu_cfg; /* SCU Config Register, offset 04 */ + uint scu_cpu_pwr_stat; /* SCU CPU Power Status Register, offset 08 */ + uint scu_inv_all; /* SCU Invalidate All Register, offset 0C */ + uint scu_reserved0[12]; /* reserved, offset 10-3C */ + uint scu_filt_start; /* SCU Filtering Start Address Reg, offset 40 */ + uint scu_filt_end; /* SCU Filtering End Address Reg, offset 44 */ + uint scu_reserved1[2]; /* reserved, offset 48-4C */ + uint scu_acc_ctl; /* SCU Access Control Register, offset 50 */ + uint scu_ns_acc_ctl; /* SCU Non-secure Access Cntrl Reg, offset 54 */ +}; + +#define SCU_CTRL_ENABLE (1 << 0) + +#endif /* SCU_H */ diff --git a/arch/arm/include/asm/arch-tegra2/tegra2.h b/arch/arm/include/asm/arch-tegra2/tegra2.h index 9001b68..742a75a 100644 --- a/arch/arm/include/asm/arch-tegra2/tegra2.h +++ b/arch/arm/include/asm/arch-tegra2/tegra2.h @@ -25,8 +25,13 @@ #define _TEGRA2_H_ #define NV_PA_SDRAM_BASE 0x00000000 +#define NV_PA_ARM_PERIPHBASE 0x50040000 +#define NV_PA_PG_UP_BASE 0x60000000 #define NV_PA_TMRUS_BASE 0x60005010 #define NV_PA_CLK_RST_BASE 0x60006000 +#define NV_PA_FLOW_BASE 0x60007000 +#define NV_PA_GPIO_BASE 0x6000D000 +#define NV_PA_EVP_BASE 0x6000F000 #define NV_PA_APB_MISC_BASE 0x70000000 #define NV_PA_APB_UARTA_BASE (NV_PA_APB_MISC_BASE + 0x6000) #define NV_PA_APB_UARTB_BASE (NV_PA_APB_MISC_BASE + 0x6040) @@ -34,9 +39,13 @@ #define NV_PA_APB_UARTD_BASE (NV_PA_APB_MISC_BASE + 0x6300) #define NV_PA_APB_UARTE_BASE (NV_PA_APB_MISC_BASE + 0x6400) #define NV_PA_PMC_BASE 0x7000E400 +#define NV_PA_CSITE_BASE 0x70040000 #define TEGRA2_SDRC_CS0 NV_PA_SDRAM_BASE #define LOW_LEVEL_SRAM_STACK 0x4000FFFC +#define EARLY_AVP_STACK (NV_PA_SDRAM_BASE + 0x20000) +#define EARLY_CPU_STACK (EARLY_AVP_STACK - 4096) +#define PG_UP_TAG_AVP 0xAAAAAAAA #ifndef __ASSEMBLY__ struct timerus { diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h new file mode 100644 index 0000000..5e4789b --- /dev/null +++ b/arch/arm/include/asm/assembler.h @@ -0,0 +1,60 @@ +/* + * arch/arm/include/asm/assembler.h + * + * Copyright (C) 1996-2000 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This file contains arm architecture specific defines + * for the different processors. + * + * Do not include any C declarations in this file - it is included by + * assembler source. + */ + +/* + * Endian independent macros for shifting bytes within registers. + */ +#ifndef __ARMEB__ +#define pull lsr +#define push lsl +#define get_byte_0 lsl #0 +#define get_byte_1 lsr #8 +#define get_byte_2 lsr #16 +#define get_byte_3 lsr #24 +#define put_byte_0 lsl #0 +#define put_byte_1 lsl #8 +#define put_byte_2 lsl #16 +#define put_byte_3 lsl #24 +#else +#define pull lsl +#define push lsr +#define get_byte_0 lsr #24 +#define get_byte_1 lsr #16 +#define get_byte_2 lsr #8 +#define get_byte_3 lsl #0 +#define put_byte_0 lsl #24 +#define put_byte_1 lsl #16 +#define put_byte_2 lsl #8 +#define put_byte_3 lsl #0 +#endif + +/* + * Data preload for architectures that support it + */ +#if defined(__ARM_ARCH_5E__) || defined(__ARM_ARCH_5TE__) || \ + defined(__ARM_ARCH_6__) || defined(__ARM_ARCH_6J__) || \ + defined(__ARM_ARCH_6T2__) || defined(__ARM_ARCH_6Z__) || \ + defined(__ARM_ARCH_6ZK__) || defined(__ARM_ARCH_7A__) || \ + defined(__ARM_ARCH_7R__) +#define PLD(code...) code +#else +#define PLD(code...) +#endif + +/* + * Cache alligned + */ +#define CALGN(code...) code diff --git a/arch/arm/include/asm/string.h b/arch/arm/include/asm/string.h index c3ea582..c6dfb25 100644 --- a/arch/arm/include/asm/string.h +++ b/arch/arm/include/asm/string.h @@ -1,6 +1,8 @@ #ifndef __ASM_ARM_STRING_H #define __ASM_ARM_STRING_H +#include <config.h> + /* * We don't do inline string functions, since the * optimised inline asm versions are not small. @@ -12,7 +14,9 @@ extern char * strrchr(const char * s, int c); #undef __HAVE_ARCH_STRCHR extern char * strchr(const char * s, int c); -#undef __HAVE_ARCH_MEMCPY +#ifdef CONFIG_USE_ARCH_MEMCPY +#define __HAVE_ARCH_MEMCPY +#endif extern void * memcpy(void *, const void *, __kernel_size_t); #undef __HAVE_ARCH_MEMMOVE @@ -22,7 +26,9 @@ extern void * memmove(void *, const void *, __kernel_size_t); extern void * memchr(const void *, int, __kernel_size_t); #undef __HAVE_ARCH_MEMZERO -#undef __HAVE_ARCH_MEMSET +#ifdef CONFIG_USE_ARCH_MEMSET +#define __HAVE_ARCH_MEMSET +#endif extern void * memset(void *, int, __kernel_size_t); #if 0 diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index 454440c..03b1b5e 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -44,6 +44,8 @@ COBJS-y += cache-cp15.o endif COBJS-y += interrupts.o COBJS-y += reset.o +SOBJS-$(CONFIG_USE_ARCH_MEMSET) += memset.o +SOBJS-$(CONFIG_USE_ARCH_MEMCPY) += memcpy.o SRCS := $(GLSOBJS:.o=.S) $(GLCOBJS:.o=.c) \ $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c index dc46e21..1a784a1 100644 --- a/arch/arm/lib/board.c +++ b/arch/arm/lib/board.c @@ -356,9 +356,13 @@ void board_init_f (ulong bootflag) #endif /* CONFIG_VFD */ #ifdef CONFIG_LCD +#ifdef CONFIG_FB_ADDR + gd->fb_base = CONFIG_FB_ADDR; +#else /* reserve memory for LCD display (always full pages) */ addr = lcd_setmem (addr); gd->fb_base = addr; +#endif /* CONFIG_FB_ADDR */ #endif /* CONFIG_LCD */ /* @@ -399,7 +403,7 @@ void board_init_f (ulong bootflag) CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ, addr_sp); #endif /* leave 3 words for abort-stack */ - addr_sp -= 3; + addr_sp -= 12; /* 8-byte alignment for ABI compliance */ addr_sp &= ~0x07; diff --git a/arch/arm/lib/bootm.c b/arch/arm/lib/bootm.c index 7734953..802e833 100644 --- a/arch/arm/lib/bootm.c +++ b/arch/arm/lib/bootm.c @@ -178,7 +178,6 @@ static int bootm_linux_fdt(int machid, bootm_headers_t *images) { ulong rd_len; void (*kernel_entry)(int zero, int dt_machid, void *dtblob); - ulong bootmap_base = getenv_bootm_low(); ulong of_size = images->ft_len; char **of_flat_tree = &images->ft_addr; ulong *initrd_start = &images->initrd_start; @@ -188,13 +187,15 @@ static int bootm_linux_fdt(int machid, bootm_headers_t *images) kernel_entry = (void (*)(int, int, void *))images->ep; + boot_fdt_add_mem_rsv_regions(lmb, *of_flat_tree); + rd_len = images->rd_end - images->rd_start; ret = boot_ramdisk_high(lmb, images->rd_start, rd_len, initrd_start, initrd_end); if (ret) return ret; - ret = boot_relocate_fdt(lmb, bootmap_base, of_flat_tree, &of_size); + ret = boot_relocate_fdt(lmb, of_flat_tree, &of_size); if (ret) return ret; diff --git a/arch/arm/lib/memcpy.S b/arch/arm/lib/memcpy.S new file mode 100644 index 0000000..40db90e --- /dev/null +++ b/arch/arm/lib/memcpy.S @@ -0,0 +1,241 @@ +/* + * linux/arch/arm/lib/memcpy.S + * + * Author: Nicolas Pitre + * Created: Sep 28, 2005 + * Copyright: MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <asm/assembler.h> + +#define W(instr) instr + +#define LDR1W_SHIFT 0 +#define STR1W_SHIFT 0 + + .macro ldr1w ptr reg abort + W(ldr) \reg, [\ptr], #4 + .endm + + .macro ldr4w ptr reg1 reg2 reg3 reg4 abort + ldmia \ptr!, {\reg1, \reg2, \reg3, \reg4} + .endm + + .macro ldr8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort + ldmia \ptr!, {\reg1, \reg2, \reg3, \reg4, \reg5, \reg6, \reg7, \reg8} + .endm + + .macro ldr1b ptr reg cond=al abort + ldr\cond\()b \reg, [\ptr], #1 + .endm + + .macro str1w ptr reg abort + W(str) \reg, [\ptr], #4 + .endm + + .macro str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort + stmia \ptr!, {\reg1, \reg2, \reg3, \reg4, \reg5, \reg6, \reg7, \reg8} + .endm + + .macro str1b ptr reg cond=al abort + str\cond\()b \reg, [\ptr], #1 + .endm + + .macro enter reg1 reg2 + stmdb sp!, {r0, \reg1, \reg2} + .endm + + .macro exit reg1 reg2 + ldmfd sp!, {r0, \reg1, \reg2} + .endm + + .text + +/* Prototype: void *memcpy(void *dest, const void *src, size_t n); */ + +.globl memcpy +memcpy: + + enter r4, lr + + subs r2, r2, #4 + blt 8f + ands ip, r0, #3 + PLD( pld [r1, #0] ) + bne 9f + ands ip, r1, #3 + bne 10f + +1: subs r2, r2, #(28) + stmfd sp!, {r5 - r8} + blt 5f + + CALGN( ands ip, r0, #31 ) + CALGN( rsb r3, ip, #32 ) + CALGN( sbcnes r4, r3, r2 ) @ C is always set here + CALGN( bcs 2f ) + CALGN( adr r4, 6f ) + CALGN( subs r2, r2, r3 ) @ C gets set + CALGN( add pc, r4, ip ) + + PLD( pld [r1, #0] ) +2: PLD( subs r2, r2, #96 ) + PLD( pld [r1, #28] ) + PLD( blt 4f ) + PLD( pld [r1, #60] ) + PLD( pld [r1, #92] ) + +3: PLD( pld [r1, #124] ) +4: ldr8w r1, r3, r4, r5, r6, r7, r8, ip, lr, abort=20f + subs r2, r2, #32 + str8w r0, r3, r4, r5, r6, r7, r8, ip, lr, abort=20f + bge 3b + PLD( cmn r2, #96 ) + PLD( bge 4b ) + +5: ands ip, r2, #28 + rsb ip, ip, #32 +#if LDR1W_SHIFT > 0 + lsl ip, ip, #LDR1W_SHIFT +#endif + addne pc, pc, ip @ C is always clear here + b 7f +6: + .rept (1 << LDR1W_SHIFT) + W(nop) + .endr + ldr1w r1, r3, abort=20f + ldr1w r1, r4, abort=20f + ldr1w r1, r5, abort=20f + ldr1w r1, r6, abort=20f + ldr1w r1, r7, abort=20f + ldr1w r1, r8, abort=20f + ldr1w r1, lr, abort=20f + +#if LDR1W_SHIFT < STR1W_SHIFT + lsl ip, ip, #STR1W_SHIFT - LDR1W_SHIFT +#elif LDR1W_SHIFT > STR1W_SHIFT + lsr ip, ip, #LDR1W_SHIFT - STR1W_SHIFT +#endif + add pc, pc, ip + nop + .rept (1 << STR1W_SHIFT) + W(nop) + .endr + str1w r0, r3, abort=20f + str1w r0, r4, abort=20f + str1w r0, r5, abort=20f + str1w r0, r6, abort=20f + str1w r0, r7, abort=20f + str1w r0, r8, abort=20f + str1w r0, lr, abort=20f + + CALGN( bcs 2b ) + +7: ldmfd sp!, {r5 - r8} + +8: movs r2, r2, lsl #31 + ldr1b r1, r3, ne, abort=21f + ldr1b r1, r4, cs, abort=21f + ldr1b r1, ip, cs, abort=21f + str1b r0, r3, ne, abort=21f + str1b r0, r4, cs, abort=21f + str1b r0, ip, cs, abort=21f + + exit r4, pc + +9: rsb ip, ip, #4 + cmp ip, #2 + ldr1b r1, r3, gt, abort=21f + ldr1b r1, r4, ge, abort=21f + ldr1b r1, lr, abort=21f + str1b r0, r3, gt, abort=21f + str1b r0, r4, ge, abort=21f + subs r2, r2, ip + str1b r0, lr, abort=21f + blt 8b + ands ip, r1, #3 + beq 1b + +10: bic r1, r1, #3 + cmp ip, #2 + ldr1w r1, lr, abort=21f + beq 17f + bgt 18f + + + .macro forward_copy_shift pull push + + subs r2, r2, #28 + blt 14f + + CALGN( ands ip, r0, #31 ) + CALGN( rsb ip, ip, #32 ) + CALGN( sbcnes r4, ip, r2 ) @ C is always set here + CALGN( subcc r2, r2, ip ) + CALGN( bcc 15f ) + +11: stmfd sp!, {r5 - r9} + + PLD( pld [r1, #0] ) + PLD( subs r2, r2, #96 ) + PLD( pld [r1, #28] ) + PLD( blt 13f ) + PLD( pld [r1, #60] ) + PLD( pld [r1, #92] ) + +12: PLD( pld [r1, #124] ) +13: ldr4w r1, r4, r5, r6, r7, abort=19f + mov r3, lr, pull #\pull + subs r2, r2, #32 + ldr4w r1, r8, r9, ip, lr, abort=19f + orr r3, r3, r4, push #\push + mov r4, r4, pull #\pull + orr r4, r4, r5, push #\push + mov r5, r5, pull #\pull + orr r5, r5, r6, push #\push + mov r6, r6, pull #\pull + orr r6, r6, r7, push #\push + mov r7, r7, pull #\pull + orr r7, r7, r8, push #\push + mov r8, r8, pull #\pull + orr r8, r8, r9, push #\push + mov r9, r9, pull #\pull + orr r9, r9, ip, push #\push + mov ip, ip, pull #\pull + orr ip, ip, lr, push #\push + str8w r0, r3, r4, r5, r6, r7, r8, r9, ip, , abort=19f + bge 12b + PLD( cmn r2, #96 ) + PLD( bge 13b ) + + ldmfd sp!, {r5 - r9} + +14: ands ip, r2, #28 + beq 16f + +15: mov r3, lr, pull #\pull + ldr1w r1, lr, abort=21f + subs ip, ip, #4 + orr r3, r3, lr, push #\push + str1w r0, r3, abort=21f + bgt 15b + CALGN( cmp r2, #0 ) + CALGN( bge 11b ) + +16: sub r1, r1, #(\push / 8) + b 8b + + .endm + + + forward_copy_shift pull=8 push=24 + +17: forward_copy_shift pull=16 push=16 + +18: forward_copy_shift pull=24 push=8 + diff --git a/arch/arm/lib/memset.S b/arch/arm/lib/memset.S new file mode 100644 index 0000000..0cdf895 --- /dev/null +++ b/arch/arm/lib/memset.S @@ -0,0 +1,126 @@ +/* + * linux/arch/arm/lib/memset.S + * + * Copyright (C) 1995-2000 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * ASM optimised string functions + */ +#include <asm/assembler.h> + + .text + .align 5 + .word 0 + +1: subs r2, r2, #4 @ 1 do we have enough + blt 5f @ 1 bytes to align with? + cmp r3, #2 @ 1 + strltb r1, [r0], #1 @ 1 + strleb r1, [r0], #1 @ 1 + strb r1, [r0], #1 @ 1 + add r2, r2, r3 @ 1 (r2 = r2 - (4 - r3)) +/* + * The pointer is now aligned and the length is adjusted. Try doing the + * memset again. + */ + +.globl memset +memset: + ands r3, r0, #3 @ 1 unaligned? + bne 1b @ 1 +/* + * we know that the pointer in r0 is aligned to a word boundary. + */ + orr r1, r1, r1, lsl #8 + orr r1, r1, r1, lsl #16 + mov r3, r1 + cmp r2, #16 + blt 4f + +#if ! CALGN(1)+0 + +/* + * We need an extra register for this loop - save the return address and + * use the LR + */ + str lr, [sp, #-4]! + mov ip, r1 + mov lr, r1 + +2: subs r2, r2, #64 + stmgeia r0!, {r1, r3, ip, lr} @ 64 bytes at a time. + stmgeia r0!, {r1, r3, ip, lr} + stmgeia r0!, {r1, r3, ip, lr} + stmgeia r0!, {r1, r3, ip, lr} + bgt 2b + ldmeqfd sp!, {pc} @ Now <64 bytes to go. +/* + * No need to correct the count; we're only testing bits from now on + */ + tst r2, #32 + stmneia r0!, {r1, r3, ip, lr} + stmneia r0!, {r1, r3, ip, lr} + tst r2, #16 + stmneia r0!, {r1, r3, ip, lr} + ldr lr, [sp], #4 + +#else + +/* + * This version aligns the destination pointer in order to write + * whole cache lines at once. + */ + + stmfd sp!, {r4-r7, lr} + mov r4, r1 + mov r5, r1 + mov r6, r1 + mov r7, r1 + mov ip, r1 + mov lr, r1 + + cmp r2, #96 + tstgt r0, #31 + ble 3f + + and ip, r0, #31 + rsb ip, ip, #32 + sub r2, r2, ip + movs ip, ip, lsl #(32 - 4) + stmcsia r0!, {r4, r5, r6, r7} + stmmiia r0!, {r4, r5} + tst ip, #(1 << 30) + mov ip, r1 + strne r1, [r0], #4 + +3: subs r2, r2, #64 + stmgeia r0!, {r1, r3-r7, ip, lr} + stmgeia r0!, {r1, r3-r7, ip, lr} + bgt 3b + ldmeqfd sp!, {r4-r7, pc} + + tst r2, #32 + stmneia r0!, {r1, r3-r7, ip, lr} + tst r2, #16 + stmneia r0!, {r4-r7} + ldmfd sp!, {r4-r7, lr} + +#endif + +4: tst r2, #8 + stmneia r0!, {r1, r3} + tst r2, #4 + strne r1, [r0], #4 +/* + * When we get here, we've got less than 4 bytes to zero. We + * may have an unaligned pointer as well. + */ +5: tst r2, #2 + strneb r1, [r0], #1 + strneb r1, [r0], #1 + tst r2, #1 + strneb r1, [r0], #1 + mov pc, lr diff --git a/arch/avr32/config.mk b/arch/avr32/config.mk index 1121ca1..9488c49 100644 --- a/arch/avr32/config.mk +++ b/arch/avr32/config.mk @@ -23,7 +23,7 @@ CROSS_COMPILE ?= avr32-linux- -STANDALONE_LOAD_ADDR = 0x00000000 +CONFIG_STANDALONE_LOAD_ADDR ?= 0x00000000 PLATFORM_RELFLAGS += -ffixed-r5 -fPIC -mno-init-got -mrelax PLATFORM_LDFLAGS += --relax diff --git a/arch/blackfin/config.mk b/arch/blackfin/config.mk index f4503ea..f0909e9 100644 --- a/arch/blackfin/config.mk +++ b/arch/blackfin/config.mk @@ -23,8 +23,15 @@ CROSS_COMPILE ?= bfin-uclinux- -STANDALONE_LOAD_ADDR = 0x1000 -m elf32bfin +CONFIG_STANDALONE_LOAD_ADDR ?= 0x1000 -m elf32bfin +ifeq ($(CONFIG_BFIN_CPU),) +CONFIG_BFIN_CPU := \ + $(shell awk '$$2 == "CONFIG_BFIN_CPU" { print $$3 }' \ + $(src)include/configs/$(BOARD).h) +else +CONFIG_BFIN_CPU := $(strip $(subst ",,$(CONFIG_BFIN_CPU))) +endif CONFIG_BFIN_BOOT_MODE := $(strip $(subst ",,$(CONFIG_BFIN_BOOT_MODE))) PLATFORM_RELFLAGS += -ffixed-P3 -fomit-frame-pointer -mno-fdpic @@ -34,7 +41,6 @@ LDFLAGS_FINAL += --gc-sections LDFLAGS += -m elf32bfin PLATFORM_RELFLAGS += -ffunction-sections -fdata-sections -PLATFORM_CPPFLAGS += -DBFIN_CPU='"$(CONFIG_BFIN_CPU)"' PLATFORM_RELFLAGS += -mcpu=$(CONFIG_BFIN_CPU) ifneq ($(CONFIG_BFIN_BOOT_MODE),BFIN_BOOT_BYPASS) @@ -67,6 +73,13 @@ endif LDR_FLAGS += $(LDR_FLAGS-y) +# Set some default LDR flags based on boot mode. +LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE)) + ifeq ($(wildcard $(TOPDIR)/board/$(BOARD)/u-boot.lds*),) LDSCRIPT = $(obj)arch/$(ARCH)/lib/u-boot.lds.S endif + +ifneq ($(CONFIG_SYS_TEXT_BASE),) +$(error do not set CONFIG_SYS_TEXT_BASE for Blackfin boards) +endif diff --git a/arch/blackfin/cpu/Makefile b/arch/blackfin/cpu/Makefile index 4a9e577..df10f1b 100644 --- a/arch/blackfin/cpu/Makefile +++ b/arch/blackfin/cpu/Makefile @@ -18,7 +18,6 @@ CEXTRA := initcode.o SEXTRA := start.o SOBJS := interrupt.o cache.o COBJS-$(CONFIG_BOOTCOUNT_LIMIT) += bootcount.o -COBJS-$(CONFIG_CMD_GPIO) += cmd_gpio.o COBJS-y += cpu.o COBJS-y += gpio.o COBJS-y += interrupts.o diff --git a/arch/blackfin/cpu/cmd_gpio.c b/arch/blackfin/cpu/cmd_gpio.c deleted file mode 100644 index e96413b..0000000 --- a/arch/blackfin/cpu/cmd_gpio.c +++ /dev/null @@ -1,118 +0,0 @@ -/* - * Control GPIO pins on the fly - * - * Copyright (c) 2008-2010 Analog Devices Inc. - * - * Licensed under the GPL-2 or later. - */ - -#include <common.h> -#include <command.h> -#include <linux/ctype.h> - -#include <asm/blackfin.h> -#include <asm/gpio.h> - -enum { - GPIO_INPUT, - GPIO_SET, - GPIO_CLEAR, - GPIO_TOGGLE, -}; - -int do_gpio(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - if (argc == 2 && !strcmp(argv[1], "status")) { - bfin_gpio_labels(); - return 0; - } - - if (argc != 3) - show_usage: - return cmd_usage(cmdtp); - - /* parse the behavior */ - ulong sub_cmd; - switch (argv[1][0]) { - case 'i': sub_cmd = GPIO_INPUT; break; - case 's': sub_cmd = GPIO_SET; break; - case 'c': sub_cmd = GPIO_CLEAR; break; - case 't': sub_cmd = GPIO_TOGGLE; break; - default: goto show_usage; - } - - /* parse the pin with format: [p][port]<#> */ - const char *str_pin = argv[2]; - - /* grab the [p]<port> portion */ - ulong port_base; - if (tolower(*str_pin) == 'p') ++str_pin; - switch (tolower(*str_pin)) { -#ifdef GPIO_PA0 - case 'a': port_base = GPIO_PA0; break; -#endif -#ifdef GPIO_PB0 - case 'b': port_base = GPIO_PB0; break; -#endif -#ifdef GPIO_PC0 - case 'c': port_base = GPIO_PC0; break; -#endif -#ifdef GPIO_PD0 - case 'd': port_base = GPIO_PD0; break; -#endif -#ifdef GPIO_PE0 - case 'e': port_base = GPIO_PE0; break; -#endif -#ifdef GPIO_PF0 - case 'f': port_base = GPIO_PF0; break; -#endif -#ifdef GPIO_PG0 - case 'g': port_base = GPIO_PG0; break; -#endif -#ifdef GPIO_PH0 - case 'h': port_base = GPIO_PH0; break; -#endif -#ifdef GPIO_PI0 - case 'i': port_base = GPIO_PI0; break; -#endif -#ifdef GPIO_PJ - case 'j': port_base = GPIO_PJ0; break; -#endif - default: goto show_usage; - } - - /* grab the <#> portion */ - ulong pin = simple_strtoul(str_pin + 1, NULL, 10); - if (pin > 15) - goto show_usage; - - /* grab the pin before we tweak it */ - ulong gpio = port_base + pin; - gpio_request(gpio, "cmd_gpio"); - - /* finally, let's do it: set direction and exec command */ - ulong value; - if (sub_cmd == GPIO_INPUT) { - gpio_direction_input(gpio); - value = gpio_get_value(gpio); - } else { - switch (sub_cmd) { - case GPIO_SET: value = 1; break; - case GPIO_CLEAR: value = 0; break; - case GPIO_TOGGLE: value = !gpio_get_value(gpio); break; - default: goto show_usage; - } - gpio_direction_output(gpio, value); - } - printf("gpio: pin %lu on port %c (gpio %lu) value is %lu\n", - pin, *str_pin, gpio, value); - - gpio_free(gpio); - - return value; -} - -U_BOOT_CMD(gpio, 3, 0, do_gpio, - "input/set/clear/toggle gpio output pins", - "<input|set|clear|toggle> <port><pin>\n" - " - input/set/clear/toggle the specified pin (e.g. PF10)"); diff --git a/arch/blackfin/cpu/cpu.h b/arch/blackfin/cpu/cpu.h index ba85e0b..e70560f 100644 --- a/arch/blackfin/cpu/cpu.h +++ b/arch/blackfin/cpu/cpu.h @@ -28,7 +28,6 @@ #include <command.h> void board_reset(void) __attribute__((__weak__)); -void bfin_reset_or_hang(void) __attribute__((__noreturn__)); void bfin_dump(struct pt_regs *reg); void bfin_panic(struct pt_regs *reg); void dump(struct pt_regs *regs); diff --git a/arch/blackfin/cpu/gpio.c b/arch/blackfin/cpu/gpio.c index 488ca11..cb96721 100644 --- a/arch/blackfin/cpu/gpio.c +++ b/arch/blackfin/cpu/gpio.c @@ -45,7 +45,7 @@ static struct gpio_port_t * const gpio_array[] = { #if defined(BF533_FAMILY) (struct gpio_port_t *) FIO_FLAG_D, #elif defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x) \ - || defined(BF538_FAMILY) + || defined(BF538_FAMILY) || defined(CONFIG_BF50x) (struct gpio_port_t *) PORTFIO, # if !defined(BF538_FAMILY) (struct gpio_port_t *) PORTGIO, @@ -71,7 +71,8 @@ static struct gpio_port_t * const gpio_array[] = { #endif }; -#if defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x) +#if defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x) || \ + defined(CONFIG_BF50x) static unsigned short * const port_fer[] = { (unsigned short *) PORTF_FER, (unsigned short *) PORTG_FER, @@ -202,7 +203,8 @@ static void port_setup(unsigned gpio, unsigned short usage) if (check_gpio(gpio)) return; -#if defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x) +#if defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x) || \ + defined(CONFIG_BF50x) if (usage == GPIO_USAGE) *port_fer[gpio_bank(gpio)] &= ~gpio_bit(gpio); else diff --git a/arch/blackfin/cpu/initcode.c b/arch/blackfin/cpu/initcode.c index 433d477..750add0 100644 --- a/arch/blackfin/cpu/initcode.c +++ b/arch/blackfin/cpu/initcode.c @@ -341,13 +341,13 @@ maybe_self_refresh(ADI_BOOT_DATA *bs) return false; /* If external memory is enabled, put it into self refresh first. */ -#ifdef EBIU_RSTCTL +#if defined(EBIU_RSTCTL) if (bfin_read_EBIU_RSTCTL() & DDR_SRESET) { serial_putc('b'); bfin_write_EBIU_RSTCTL(bfin_read_EBIU_RSTCTL() | SRREQ); return true; } -#else +#elif defined(EBIU_SDGCTL) if (bfin_read_EBIU_SDBCTL() & EBE) { serial_putc('b'); bfin_write_EBIU_SDGCTL(bfin_read_EBIU_SDGCTL() | SRFS); @@ -373,12 +373,15 @@ program_clocks(ADI_BOOT_DATA *bs, bool put_into_srfs) /* If we're entering self refresh, make sure it has happened. */ if (put_into_srfs) -#ifdef EBIU_RSTCTL +#if defined(EBIU_RSTCTL) while (!(bfin_read_EBIU_RSTCTL() & SRACK)) -#else + continue; +#elif defined(EBIU_SDGCTL) while (!(bfin_read_EBIU_SDSTAT() & SDSRA)) -#endif continue; +#else + ; +#endif serial_putc('c'); @@ -536,7 +539,7 @@ program_memory_controller(ADI_BOOT_DATA *bs, bool put_into_srfs) /* Program the external memory controller before we come out of * self-refresh. This only works with our SDRAM controller. */ -#ifndef EBIU_RSTCTL +#ifdef EBIU_SDGCTL # ifdef CONFIG_EBIU_SDRRC_VAL bfin_write_EBIU_SDRRC(CONFIG_EBIU_SDRRC_VAL); # endif @@ -552,9 +555,9 @@ program_memory_controller(ADI_BOOT_DATA *bs, bool put_into_srfs) /* Now that we've reprogrammed, take things out of self refresh. */ if (put_into_srfs) -#ifdef EBIU_RSTCTL +#if defined(EBIU_RSTCTL) bfin_write_EBIU_RSTCTL(bfin_read_EBIU_RSTCTL() & ~(SRREQ)); -#else +#elif defined(EBIU_SDGCTL) bfin_write_EBIU_SDGCTL(bfin_read_EBIU_SDGCTL() & ~(SRFS)); #endif @@ -646,10 +649,10 @@ program_async_controller(ADI_BOOT_DATA *bs) serial_putc('b'); /* Not all parts have these additional MMRs. */ -#ifdef EBIU_MODE -# ifdef CONFIG_EBIU_MBSCTL_VAL +#ifdef EBIU_MBSCTL bfin_write_EBIU_MBSCTL(CONFIG_EBIU_MBSCTL_VAL); -# endif +#endif +#ifdef EBIU_MODE # ifdef CONFIG_EBIU_MODE_VAL bfin_write_EBIU_MODE(CONFIG_EBIU_MODE_VAL); # endif diff --git a/arch/blackfin/cpu/reset.c b/arch/blackfin/cpu/reset.c index 164afde..9307e9f 100644 --- a/arch/blackfin/cpu/reset.c +++ b/arch/blackfin/cpu/reset.c @@ -80,27 +80,11 @@ static void bfin_reset(void) * PC relative call with a 25 bit immediate. This is not enough * to get us from the top of SDRAM into L1. */ -__attribute__ ((__noreturn__)) -static inline void bfin_reset_trampoline(void) +int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { if (board_reset) board_reset(); while (1) asm("jump (%0);" : : "a" (bfin_reset)); -} - -__attribute__ ((__noreturn__)) -void bfin_reset_or_hang(void) -{ -#ifdef CONFIG_PANIC_HANG - hang(); -#else - bfin_reset_trampoline(); -#endif -} - -int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - bfin_reset_trampoline(); return 0; } diff --git a/arch/blackfin/cpu/serial.h b/arch/blackfin/cpu/serial.h index f9e311f..7999a19 100644 --- a/arch/blackfin/cpu/serial.h +++ b/arch/blackfin/cpu/serial.h @@ -31,13 +31,19 @@ #define LOB(x) ((x) & 0xFF) #define HIB(x) (((x) >> 8) & 0xFF) +#if defined(__ADSPBF50x__) || defined(__ADSPBF54x__) +# define BFIN_UART_HW_VER 2 +#else +# define BFIN_UART_HW_VER 1 +#endif + /* * All Blackfin system MMRs are padded to 32bits even if the register * itself is only 16bits. So use a helper macro to streamline this. */ #define __BFP(m) u16 m; u16 __pad_##m struct bfin_mmr_serial { -#ifdef __ADSPBF54x__ +#if BFIN_UART_HW_VER == 2 __BFP(dll); __BFP(dlh); __BFP(gctl); @@ -74,25 +80,21 @@ struct bfin_mmr_serial { }; #undef __BFP -#ifndef UART_LSR -# if (CONFIG_UART_CONSOLE == 3) -# define UART_BASE UART3_DLL -# elif (CONFIG_UART_CONSOLE == 2) -# define UART_BASE UART2_DLL -# elif (CONFIG_UART_CONSOLE == 1) -# define UART_BASE UART1_DLL -# elif (CONFIG_UART_CONSOLE == 0) -# define UART_BASE UART0_DLL -# endif +#define __PASTE_UART(num, pfx, sfx) pfx##num##_##sfx +#define _PASTE_UART(num, pfx, sfx) __PASTE_UART(num, pfx, sfx) +#define MMR_UART(mmr) _PASTE_UART(CONFIG_UART_CONSOLE, UART, DLL) +#define P_UART(pin) _PASTE_UART(CONFIG_UART_CONSOLE, P_UART, pin) + +#ifndef UART_DLL +# define UART_DLL MMR_UART(DLL) #else # if CONFIG_UART_CONSOLE != 0 # error CONFIG_UART_CONSOLE must be 0 on parts with only one UART # endif -# define UART_BASE UART_DLL #endif -#define pUART ((volatile struct bfin_mmr_serial *)UART_BASE) +#define pUART ((volatile struct bfin_mmr_serial *)UART_DLL) -#ifdef __ADSPBF54x__ +#if BFIN_UART_HW_VER == 2 # define ACCESS_LATCH() # define ACCESS_PORT_IER() #else @@ -106,23 +108,21 @@ __attribute__((always_inline)) static inline void serial_do_portmux(void) { if (!BFIN_DEBUG_EARLY_SERIAL) { - const unsigned short pins[] = { -#if CONFIG_UART_CONSOLE == 0 - P_UART0_TX, P_UART0_RX, -#elif CONFIG_UART_CONSOLE == 1 - P_UART1_TX, P_UART1_RX, -#elif CONFIG_UART_CONSOLE == 2 - P_UART2_TX, P_UART2_RX, -#elif CONFIG_UART_CONSOLE == 3 - P_UART3_TX, P_UART3_RX, -#endif - 0, - }; + const unsigned short pins[] = { P_UART(RX), P_UART(TX), 0, }; peripheral_request_list(pins, "bfin-uart"); return; } -#if defined(__ADSPBF51x__) +#if defined(__ADSPBF50x__) +# define DO_MUX(port, mux_tx, mux_rx, tx, rx) \ + bfin_write_PORT##port##_MUX((bfin_read_PORT##port##_MUX() & ~(PORT_x_MUX_##mux_tx##_MASK | PORT_x_MUX_##mux_rx##_MASK)) | PORT_x_MUX_##mux_tx##_FUNC_1 | PORT_x_MUX_##mux_rx##_FUNC_1); \ + bfin_write_PORT##port##_FER(bfin_read_PORT##port##_FER() | P##port##tx | P##port##rx); + switch (CONFIG_UART_CONSOLE) { + case 0: DO_MUX(G, 7, 7, 12, 13); break; /* Port G; mux 7; PG12 and PG13 */ + case 1: DO_MUX(F, 3, 3, 6, 7); break; /* Port F; mux 3; PF6 and PF7 */ + } + SSYNC(); +#elif defined(__ADSPBF51x__) # define DO_MUX(port, mux_tx, mux_rx, tx, rx) \ bfin_write_PORT##port##_MUX((bfin_read_PORT##port##_MUX() & ~(PORT_x_MUX_##mux_tx##_MASK | PORT_x_MUX_##mux_rx##_MASK)) | PORT_x_MUX_##mux_tx##_FUNC_2 | PORT_x_MUX_##mux_rx##_FUNC_2); \ bfin_write_PORT##port##_FER(bfin_read_PORT##port##_FER() | P##port##tx | P##port##rx); @@ -141,13 +141,11 @@ static inline void serial_do_portmux(void) } SSYNC(); #elif defined(__ADSPBF537__) || defined(__ADSPBF536__) || defined(__ADSPBF534__) -# define DO_MUX(func, tx, rx) \ - bfin_write_PORT_MUX(bfin_read_PORT_MUX() & ~(func)); \ - bfin_write_PORTF_FER(bfin_read_PORTF_FER() | PF##tx | PF##rx); - switch (CONFIG_UART_CONSOLE) { - case 0: DO_MUX(PFDE, 0, 1); break; - case 1: DO_MUX(PFTE, 2, 3); break; - } + const uint16_t func[] = { PFDE, PFTE, }; + bfin_write_PORT_MUX(bfin_read_PORT_MUX() & ~func[CONFIG_UART_CONSOLE]); + bfin_write_PORTF_FER(bfin_read_PORTF_FER() | + (1 << P_IDENT(P_UART(RX))) | + (1 << P_IDENT(P_UART(TX)))); SSYNC(); #elif defined(__ADSPBF54x__) # define DO_MUX(port, tx, rx) \ @@ -160,6 +158,12 @@ static inline void serial_do_portmux(void) case 3: DO_MUX(B, 6, 7); break; /* Port B; PB6 and PB7 */ } SSYNC(); +#elif defined(__ADSPBF561__) + /* UART pins could be GPIO, but they aren't pin muxed. */ +#else +# if (P_UART(RX) & P_DEFINED) || (P_UART(TX) & P_DEFINED) +# error "missing portmux logic for UART" +# endif #endif } diff --git a/arch/blackfin/cpu/start.S b/arch/blackfin/cpu/start.S index 7a3abba..15ecb1e 100644 --- a/arch/blackfin/cpu/start.S +++ b/arch/blackfin/cpu/start.S @@ -52,6 +52,19 @@ ENTRY(_start) sp.l = LO(L1_SRAM_SCRATCH_END - 20); sp.h = HI(L1_SRAM_SCRATCH_END - 20); + /* Optimization register tricks: keep a base value in the + * reserved P registers so we use the load/store with an + * offset syntax. R0 = [P5 + <constant>]; + * P4 - system MMR base + * P5 - core MMR base + */ +#ifdef CONFIG_HW_WATCHDOG + p4.l = 0; + p4.h = HI(SYSMMR_BASE); +#endif + p5.l = 0; + p5.h = HI(COREMMR_BASE); + #ifdef CONFIG_HW_WATCHDOG # ifndef CONFIG_HW_WATCHDOG_TIMEOUT_START # define CONFIG_HW_WATCHDOG_TIMEOUT_START 5000 @@ -60,13 +73,11 @@ ENTRY(_start) * That should be long enough to bootstrap ourselves up and * then the common u-boot code can take over. */ - P0.L = LO(WDOG_CNT); - P0.H = HI(WDOG_CNT); - R0.L = 0; - R0.H = HI(MSEC_TO_SCLK(CONFIG_HW_WATCHDOG_TIMEOUT_START)); - [P0] = R0; + r0 = 0; + r0.h = HI(MSEC_TO_SCLK(CONFIG_HW_WATCHDOG_TIMEOUT_START)); + [p4 + (WDOG_CNT - SYSMMR_BASE)] = r0; /* fire up the watchdog - R0.L above needs to be 0x0000 */ - W[P0 + (WDOG_CTL - WDOG_CNT)] = R0; + W[p4 + (WDOG_CTL - SYSMMR_BASE)] = r0; #endif /* Turn on the serial for debugging the init process */ @@ -121,6 +132,18 @@ ENTRY(_start) if cc jump .Lnorelocate; r6 = 0 (x); + /* Turn off caches as they require CPLBs and a CPLB miss requires + * a software exception handler to process it. But we're about to + * clobber any previous executing software (like U-Boot that just + * launched a new U-Boot via 'go'), so any handler state will be + * unreliable after the memcpy below. + */ + serial_early_puts("Kill Caches"); + r0 = 0; + [p5 + (IMEM_CONTROL - COREMMR_BASE)] = r0; + [p5 + (DMEM_CONTROL - COREMMR_BASE)] = r0; + ssync; + /* In bypass mode, we don't have an LDR with an init block * so we need to explicitly call it ourselves. This will * reprogram our clocks, memory, and setup our async banks. @@ -204,17 +227,15 @@ ENTRY(_start) serial_early_puts("Lower to 15"); r0 = r7; r1 = r6; - p0.l = LO(EVT15); - p0.h = HI(EVT15); p1.l = .Lenable_nested; p1.h = .Lenable_nested; - [p0] = p1; + [p5 + (EVT15 - COREMMR_BASE)] = p1; r7 = EVT_IVG15 (z); sti r7; raise 15; - p4.l = .LWAIT_HERE; - p4.h = .LWAIT_HERE; - reti = p4; + p3.l = .LWAIT_HERE; + p3.h = .LWAIT_HERE; + reti = p3; rti; /* Enable nested interrupts before continuing with cpu init */ diff --git a/arch/blackfin/cpu/traps.c b/arch/blackfin/cpu/traps.c index 09388aa..0cb833a 100644 --- a/arch/blackfin/cpu/traps.c +++ b/arch/blackfin/cpu/traps.c @@ -426,5 +426,5 @@ void bfin_panic(struct pt_regs *regs) unsigned long tflags; trace_buffer_save(tflags); bfin_dump(regs); - bfin_reset_or_hang(); + panic("PANIC: Blackfin internal error"); } diff --git a/arch/blackfin/include/asm/blackfin_cdef.h b/arch/blackfin/include/asm/blackfin_cdef.h index 952444e..a19f0f7 100644 --- a/arch/blackfin/include/asm/blackfin_cdef.h +++ b/arch/blackfin/include/asm/blackfin_cdef.h @@ -6,6 +6,12 @@ #ifndef __MACH_CDEF_BLACKFIN__ #define __MACH_CDEF_BLACKFIN__ +#ifdef __ADSPBF504__ +# include "mach-bf506/BF504_cdef.h" +#endif +#ifdef __ADSPBF506__ +# include "mach-bf506/BF506_cdef.h" +#endif #ifdef __ADSPBF512__ # include "mach-bf518/BF512_cdef.h" #endif diff --git a/arch/blackfin/include/asm/blackfin_def.h b/arch/blackfin/include/asm/blackfin_def.h index 385966a..f06d1f1 100644 --- a/arch/blackfin/include/asm/blackfin_def.h +++ b/arch/blackfin/include/asm/blackfin_def.h @@ -6,6 +6,16 @@ #ifndef __MACH_DEF_BLACKFIN__ #define __MACH_DEF_BLACKFIN__ +#ifdef __ADSPBF504__ +# include "mach-bf506/BF504_def.h" +# include "mach-bf506/anomaly.h" +# include "mach-bf506/def_local.h" +#endif +#ifdef __ADSPBF506__ +# include "mach-bf506/BF506_def.h" +# include "mach-bf506/anomaly.h" +# include "mach-bf506/def_local.h" +#endif #ifdef __ADSPBF512__ # include "mach-bf518/BF512_def.h" # include "mach-bf518/anomaly.h" diff --git a/arch/blackfin/include/asm/config.h b/arch/blackfin/include/asm/config.h index 0437252..89814cd 100644 --- a/arch/blackfin/include/asm/config.h +++ b/arch/blackfin/include/asm/config.h @@ -12,6 +12,11 @@ /* Some of our defines use this (like CONFIG_SYS_GBL_DATA_ADDR) */ #include <asm-offsets.h> +/* Sanity check CONFIG_BFIN_CPU */ +#ifndef CONFIG_BFIN_CPU +# error CONFIG_BFIN_CPU: your board config needs to define this +#endif + #ifndef CONFIG_BFIN_SCRATCH_REG # define CONFIG_BFIN_SCRATCH_REG retn #endif @@ -104,8 +109,11 @@ #ifndef CONFIG_SYS_GBL_DATA_ADDR # define CONFIG_SYS_GBL_DATA_ADDR (CONFIG_SYS_MALLOC_BASE - GENERATED_GBL_DATA_SIZE) #endif +#ifndef CONFIG_SYS_BD_INFO_ADDR +# define CONFIG_SYS_BD_INFO_ADDR (CONFIG_SYS_GBL_DATA_ADDR - GENERATED_BD_INFO_SIZE) +#endif #ifndef CONFIG_STACKBASE -# define CONFIG_STACKBASE (CONFIG_SYS_GBL_DATA_ADDR - 4) +# define CONFIG_STACKBASE (CONFIG_SYS_BD_INFO_ADDR - 4) #endif #ifndef CONFIG_SYS_MEMTEST_START # define CONFIG_SYS_MEMTEST_START 0 diff --git a/arch/blackfin/include/asm/gpio.h b/arch/blackfin/include/asm/gpio.h index b650ef0..9c0e5d1 100644 --- a/arch/blackfin/include/asm/gpio.h +++ b/arch/blackfin/include/asm/gpio.h @@ -196,6 +196,59 @@ static inline int gpio_is_valid(int number) return number >= 0 && number < MAX_BLACKFIN_GPIOS; } +#include <linux/ctype.h> + +static inline int name_to_gpio(const char *name) +{ + int port_base; + + if (tolower(*name) == 'p') { + ++name; + + switch (tolower(*name)) { +#ifdef GPIO_PA0 + case 'a': port_base = GPIO_PA0; break; +#endif +#ifdef GPIO_PB0 + case 'b': port_base = GPIO_PB0; break; +#endif +#ifdef GPIO_PC0 + case 'c': port_base = GPIO_PC0; break; +#endif +#ifdef GPIO_PD0 + case 'd': port_base = GPIO_PD0; break; +#endif +#ifdef GPIO_PE0 + case 'e': port_base = GPIO_PE0; break; +#endif +#ifdef GPIO_PF0 + case 'f': port_base = GPIO_PF0; break; +#endif +#ifdef GPIO_PG0 + case 'g': port_base = GPIO_PG0; break; +#endif +#ifdef GPIO_PH0 + case 'h': port_base = GPIO_PH0; break; +#endif +#ifdef GPIO_PI0 + case 'i': port_base = GPIO_PI0; break; +#endif +#ifdef GPIO_PJ + case 'j': port_base = GPIO_PJ0; break; +#endif + default: return -1; + } + + ++name; + } else + port_base = 0; + + return port_base + simple_strtoul(name, NULL, 10); +} +#define name_to_gpio(n) name_to_gpio(n) + +#define gpio_status() bfin_gpio_labels() + #endif /* __ASSEMBLY__ */ #endif /* __ARCH_BLACKFIN_GPIO_H__ */ diff --git a/arch/blackfin/include/asm/mach-bf506/BF504_cdef.h b/arch/blackfin/include/asm/mach-bf506/BF504_cdef.h new file mode 100644 index 0000000..27864e5 --- /dev/null +++ b/arch/blackfin/include/asm/mach-bf506/BF504_cdef.h @@ -0,0 +1,1782 @@ +/* DO NOT EDIT THIS FILE + * Automatically generated by generate-cdef-headers.xsl + * DO NOT EDIT THIS FILE + */ + +#ifndef __BFIN_CDEF_ADSP_BF504_proc__ +#define __BFIN_CDEF_ADSP_BF504_proc__ + +#include "../mach-common/ADSP-EDN-core_cdef.h" + +#define bfin_read_PLL_CTL() bfin_read16(PLL_CTL) +#define bfin_write_PLL_CTL(val) bfin_write16(PLL_CTL, val) +#define bfin_read_PLL_DIV() bfin_read16(PLL_DIV) +#define bfin_write_PLL_DIV(val) bfin_write16(PLL_DIV, val) +#define bfin_read_VR_CTL() bfin_read16(VR_CTL) +#define bfin_write_VR_CTL(val) bfin_write16(VR_CTL, val) +#define bfin_read_PLL_STAT() bfin_read16(PLL_STAT) +#define bfin_write_PLL_STAT(val) bfin_write16(PLL_STAT, val) +#define bfin_read_PLL_LOCKCNT() bfin_read16(PLL_LOCKCNT) +#define bfin_write_PLL_LOCKCNT(val) bfin_write16(PLL_LOCKCNT, val) +#define bfin_read_CHIPID() bfin_read32(CHIPID) +#define bfin_write_CHIPID(val) bfin_write32(CHIPID, val) +#define bfin_read_SWRST() bfin_read16(SWRST) +#define bfin_write_SWRST(val) bfin_write16(SWRST, val) +#define bfin_read_SYSCR() bfin_read16(SYSCR) +#define bfin_write_SYSCR(val) bfin_write16(SYSCR, val) +#define bfin_read_SIC_RVECT() bfin_read16(SIC_RVECT) +#define bfin_write_SIC_RVECT(val) bfin_write16(SIC_RVECT, val) +#define bfin_read_SIC_IMASK0() bfin_read32(SIC_IMASK0) +#define bfin_write_SIC_IMASK0(val) bfin_write32(SIC_IMASK0, val) +#define bfin_read_SIC_IAR0() bfin_read32(SIC_IAR0) +#define bfin_write_SIC_IAR0(val) bfin_write32(SIC_IAR0, val) +#define bfin_read_SIC_IAR1() bfin_read32(SIC_IAR1) +#define bfin_write_SIC_IAR1(val) bfin_write32(SIC_IAR1, val) +#define bfin_read_SIC_IAR2() bfin_read32(SIC_IAR2) +#define bfin_write_SIC_IAR2(val) bfin_write32(SIC_IAR2, val) +#define bfin_read_SIC_IAR3() bfin_read32(SIC_IAR3) +#define bfin_write_SIC_IAR3(val) bfin_write32(SIC_IAR3, val) +#define bfin_read_SIC_ISR0() bfin_read32(SIC_ISR0) +#define bfin_write_SIC_ISR0(val) bfin_write32(SIC_ISR0, val) +#define bfin_read_SIC_IWR0() bfin_read32(SIC_IWR0) +#define bfin_write_SIC_IWR0(val) bfin_write32(SIC_IWR0, val) +#define bfin_read_SIC_IMASK1() bfin_read32(SIC_IMASK1) +#define bfin_write_SIC_IMASK1(val) bfin_write32(SIC_IMASK1, val) +#define bfin_read_SIC_IAR4() bfin_read32(SIC_IAR4) +#define bfin_write_SIC_IAR4(val) bfin_write32(SIC_IAR4, val) +#define bfin_read_SIC_IAR5() bfin_read32(SIC_IAR5) +#define bfin_write_SIC_IAR5(val) bfin_write32(SIC_IAR5, val) +#define bfin_read_SIC_IAR6() bfin_read32(SIC_IAR6) +#define bfin_write_SIC_IAR6(val) bfin_write32(SIC_IAR6, val) +#define bfin_read_SIC_IAR7() bfin_read32(SIC_IAR7) +#define bfin_write_SIC_IAR7(val) bfin_write32(SIC_IAR7, val) +#define bfin_read_SIC_ISR1() bfin_read32(SIC_ISR1) +#define bfin_write_SIC_ISR1(val) bfin_write32(SIC_ISR1, val) +#define bfin_read_SIC_IWR1() bfin_read32(SIC_IWR1) +#define bfin_write_SIC_IWR1(val) bfin_write32(SIC_IWR1, val) +#define bfin_read_WDOG_CTL() bfin_read16(WDOG_CTL) +#define bfin_write_WDOG_CTL(val) bfin_write16(WDOG_CTL, val) +#define bfin_read_WDOG_CNT() bfin_read32(WDOG_CNT) +#define bfin_write_WDOG_CNT(val) bfin_write32(WDOG_CNT, val) +#define bfin_read_WDOG_STAT() bfin_read32(WDOG_STAT) +#define bfin_write_WDOG_STAT(val) bfin_write32(WDOG_STAT, val) +#define bfin_read_UART0_DLL() bfin_read16(UART0_DLL) +#define bfin_write_UART0_DLL(val) bfin_write16(UART0_DLL, val) +#define bfin_read_UART0_DLH() bfin_read16(UART0_DLH) +#define bfin_write_UART0_DLH(val) bfin_write16(UART0_DLH, val) +#define bfin_read_UART0_GCTL() bfin_read16(UART0_GCTL) +#define bfin_write_UART0_GCTL(val) bfin_write16(UART0_GCTL, val) +#define bfin_read_UART0_LCR() bfin_read16(UART0_LCR) +#define bfin_write_UART0_LCR(val) bfin_write16(UART0_LCR, val) +#define bfin_read_UART0_MCR() bfin_read16(UART0_MCR) +#define bfin_write_UART0_MCR(val) bfin_write16(UART0_MCR, val) +#define bfin_read_UART0_LSR() bfin_read16(UART0_LSR) +#define bfin_write_UART0_LSR(val) bfin_write16(UART0_LSR, val) +#define bfin_read_UART0_MSR() bfin_read16(UART0_MSR) +#define bfin_write_UART0_MSR(val) bfin_write16(UART0_MSR, val) +#define bfin_read_UART0_SCR() bfin_read16(UART0_SCR) +#define bfin_write_UART0_SCR(val) bfin_write16(UART0_SCR, val) +#define bfin_read_UART0_IER_SET() bfin_read16(UART0_IER_SET) +#define bfin_write_UART0_IER_SET(val) bfin_write16(UART0_IER_SET, val) +#define bfin_read_UART0_IER_CLEAR() bfin_read16(UART0_IER_CLEAR) +#define bfin_write_UART0_IER_CLEAR(val) bfin_write16(UART0_IER_CLEAR, val) +#define bfin_read_UART0_THR() bfin_read16(UART0_THR) +#define bfin_write_UART0_THR(val) bfin_write16(UART0_THR, val) +#define bfin_read_UART0_RBR() bfin_read16(UART0_RBR) +#define bfin_write_UART0_RBR(val) bfin_write16(UART0_RBR, val) +#define bfin_read_SPI0_CTL() bfin_read16(SPI0_CTL) +#define bfin_write_SPI0_CTL(val) bfin_write16(SPI0_CTL, val) +#define bfin_read_SPI0_FLG() bfin_read16(SPI0_FLG) +#define bfin_write_SPI0_FLG(val) bfin_write16(SPI0_FLG, val) +#define bfin_read_SPI0_STAT() bfin_read16(SPI0_STAT) +#define bfin_write_SPI0_STAT(val) bfin_write16(SPI0_STAT, val) +#define bfin_read_SPI0_TDBR() bfin_read16(SPI0_TDBR) +#define bfin_write_SPI0_TDBR(val) bfin_write16(SPI0_TDBR, val) +#define bfin_read_SPI0_RDBR() bfin_read16(SPI0_RDBR) +#define bfin_write_SPI0_RDBR(val) bfin_write16(SPI0_RDBR, val) +#define bfin_read_SPI0_BAUD() bfin_read16(SPI0_BAUD) +#define bfin_write_SPI0_BAUD(val) bfin_write16(SPI0_BAUD, val) +#define bfin_read_SPI0_SHADOW() bfin_read16(SPI0_SHADOW) +#define bfin_write_SPI0_SHADOW(val) bfin_write16(SPI0_SHADOW, val) +#define bfin_read_TIMER0_CONFIG() bfin_read16(TIMER0_CONFIG) +#define bfin_write_TIMER0_CONFIG(val) bfin_write16(TIMER0_CONFIG, val) +#define bfin_read_TIMER0_COUNTER() bfin_read32(TIMER0_COUNTER) +#define bfin_write_TIMER0_COUNTER(val) bfin_write32(TIMER0_COUNTER, val) +#define bfin_read_TIMER0_PERIOD() bfin_read32(TIMER0_PERIOD) +#define bfin_write_TIMER0_PERIOD(val) bfin_write32(TIMER0_PERIOD, val) +#define bfin_read_TIMER0_WIDTH() bfin_read32(TIMER0_WIDTH) +#define bfin_write_TIMER0_WIDTH(val) bfin_write32(TIMER0_WIDTH, val) +#define bfin_read_TIMER1_CONFIG() bfin_read16(TIMER1_CONFIG) +#define bfin_write_TIMER1_CONFIG(val) bfin_write16(TIMER1_CONFIG, val) +#define bfin_read_TIMER1_COUNTER() bfin_read32(TIMER1_COUNTER) +#define bfin_write_TIMER1_COUNTER(val) bfin_write32(TIMER1_COUNTER, val) +#define bfin_read_TIMER1_PERIOD() bfin_read32(TIMER1_PERIOD) +#define bfin_write_TIMER1_PERIOD(val) bfin_write32(TIMER1_PERIOD, val) +#define bfin_read_TIMER1_WIDTH() bfin_read32(TIMER1_WIDTH) +#define bfin_write_TIMER1_WIDTH(val) bfin_write32(TIMER1_WIDTH, val) +#define bfin_read_TIMER2_CONFIG() bfin_read16(TIMER2_CONFIG) +#define bfin_write_TIMER2_CONFIG(val) bfin_write16(TIMER2_CONFIG, val) +#define bfin_read_TIMER2_COUNTER() bfin_read32(TIMER2_COUNTER) +#define bfin_write_TIMER2_COUNTER(val) bfin_write32(TIMER2_COUNTER, val) +#define bfin_read_TIMER2_PERIOD() bfin_read32(TIMER2_PERIOD) +#define bfin_write_TIMER2_PERIOD(val) bfin_write32(TIMER2_PERIOD, val) +#define bfin_read_TIMER2_WIDTH() bfin_read32(TIMER2_WIDTH) +#define bfin_write_TIMER2_WIDTH(val) bfin_write32(TIMER2_WIDTH, val) +#define bfin_read_TIMER3_CONFIG() bfin_read16(TIMER3_CONFIG) +#define bfin_write_TIMER3_CONFIG(val) bfin_write16(TIMER3_CONFIG, val) +#define bfin_read_TIMER3_COUNTER() bfin_read32(TIMER3_COUNTER) +#define bfin_write_TIMER3_COUNTER(val) bfin_write32(TIMER3_COUNTER, val) +#define bfin_read_TIMER3_PERIOD() bfin_read32(TIMER3_PERIOD) +#define bfin_write_TIMER3_PERIOD(val) bfin_write32(TIMER3_PERIOD, val) +#define bfin_read_TIMER3_WIDTH() bfin_read32(TIMER3_WIDTH) +#define bfin_write_TIMER3_WIDTH(val) bfin_write32(TIMER3_WIDTH, val) +#define bfin_read_TIMER4_CONFIG() bfin_read16(TIMER4_CONFIG) +#define bfin_write_TIMER4_CONFIG(val) bfin_write16(TIMER4_CONFIG, val) +#define bfin_read_TIMER4_COUNTER() bfin_read32(TIMER4_COUNTER) +#define bfin_write_TIMER4_COUNTER(val) bfin_write32(TIMER4_COUNTER, val) +#define bfin_read_TIMER4_PERIOD() bfin_read32(TIMER4_PERIOD) +#define bfin_write_TIMER4_PERIOD(val) bfin_write32(TIMER4_PERIOD, val) +#define bfin_read_TIMER4_WIDTH() bfin_read32(TIMER4_WIDTH) +#define bfin_write_TIMER4_WIDTH(val) bfin_write32(TIMER4_WIDTH, val) +#define bfin_read_TIMER5_CONFIG() bfin_read16(TIMER5_CONFIG) +#define bfin_write_TIMER5_CONFIG(val) bfin_write16(TIMER5_CONFIG, val) +#define bfin_read_TIMER5_COUNTER() bfin_read32(TIMER5_COUNTER) +#define bfin_write_TIMER5_COUNTER(val) bfin_write32(TIMER5_COUNTER, val) +#define bfin_read_TIMER5_PERIOD() bfin_read32(TIMER5_PERIOD) +#define bfin_write_TIMER5_PERIOD(val) bfin_write32(TIMER5_PERIOD, val) +#define bfin_read_TIMER5_WIDTH() bfin_read32(TIMER5_WIDTH) +#define bfin_write_TIMER5_WIDTH(val) bfin_write32(TIMER5_WIDTH, val) +#define bfin_read_TIMER6_CONFIG() bfin_read16(TIMER6_CONFIG) +#define bfin_write_TIMER6_CONFIG(val) bfin_write16(TIMER6_CONFIG, val) +#define bfin_read_TIMER6_COUNTER() bfin_read32(TIMER6_COUNTER) +#define bfin_write_TIMER6_COUNTER(val) bfin_write32(TIMER6_COUNTER, val) +#define bfin_read_TIMER6_PERIOD() bfin_read32(TIMER6_PERIOD) +#define bfin_write_TIMER6_PERIOD(val) bfin_write32(TIMER6_PERIOD, val) +#define bfin_read_TIMER6_WIDTH() bfin_read32(TIMER6_WIDTH) +#define bfin_write_TIMER6_WIDTH(val) bfin_write32(TIMER6_WIDTH, val) +#define bfin_read_TIMER7_CONFIG() bfin_read16(TIMER7_CONFIG) +#define bfin_write_TIMER7_CONFIG(val) bfin_write16(TIMER7_CONFIG, val) +#define bfin_read_TIMER7_COUNTER() bfin_read32(TIMER7_COUNTER) +#define bfin_write_TIMER7_COUNTER(val) bfin_write32(TIMER7_COUNTER, val) +#define bfin_read_TIMER7_PERIOD() bfin_read32(TIMER7_PERIOD) +#define bfin_write_TIMER7_PERIOD(val) bfin_write32(TIMER7_PERIOD, val) +#define bfin_read_TIMER7_WIDTH() bfin_read32(TIMER7_WIDTH) +#define bfin_write_TIMER7_WIDTH(val) bfin_write32(TIMER7_WIDTH, val) +#define bfin_read_TIMER_ENABLE() bfin_read16(TIMER_ENABLE) +#define bfin_write_TIMER_ENABLE(val) bfin_write16(TIMER_ENABLE, val) +#define bfin_read_TIMER_DISABLE() bfin_read16(TIMER_DISABLE) +#define bfin_write_TIMER_DISABLE(val) bfin_write16(TIMER_DISABLE, val) +#define bfin_read_TIMER_STATUS() bfin_read32(TIMER_STATUS) +#define bfin_write_TIMER_STATUS(val) bfin_write32(TIMER_STATUS, val) +#define bfin_read_PORTFIO() bfin_read16(PORTFIO) +#define bfin_write_PORTFIO(val) bfin_write16(PORTFIO, val) +#define bfin_read_PORTFIO_CLEAR() bfin_read16(PORTFIO_CLEAR) +#define bfin_write_PORTFIO_CLEAR(val) bfin_write16(PORTFIO_CLEAR, val) +#define bfin_read_PORTFIO_SET() bfin_read16(PORTFIO_SET) +#define bfin_write_PORTFIO_SET(val) bfin_write16(PORTFIO_SET, val) +#define bfin_read_PORTFIO_TOGGLE() bfin_read16(PORTFIO_TOGGLE) +#define bfin_write_PORTFIO_TOGGLE(val) bfin_write16(PORTFIO_TOGGLE, val) +#define bfin_read_PORTFIO_MASKA() bfin_read16(PORTFIO_MASKA) +#define bfin_write_PORTFIO_MASKA(val) bfin_write16(PORTFIO_MASKA, val) +#define bfin_read_PORTFIO_MASKA_CLEAR() bfin_read16(PORTFIO_MASKA_CLEAR) +#define bfin_write_PORTFIO_MASKA_CLEAR(val) bfin_write16(PORTFIO_MASKA_CLEAR, val) +#define bfin_read_PORTFIO_MASKA_SET() bfin_read16(PORTFIO_MASKA_SET) +#define bfin_write_PORTFIO_MASKA_SET(val) bfin_write16(PORTFIO_MASKA_SET, val) +#define bfin_read_PORTFIO_MASKA_TOGGLE() bfin_read16(PORTFIO_MASKA_TOGGLE) +#define bfin_write_PORTFIO_MASKA_TOGGLE(val) bfin_write16(PORTFIO_MASKA_TOGGLE, val) +#define bfin_read_PORTFIO_MASKB() bfin_read16(PORTFIO_MASKB) +#define bfin_write_PORTFIO_MASKB(val) bfin_write16(PORTFIO_MASKB, val) +#define bfin_read_PORTFIO_MASKB_CLEAR() bfin_read16(PORTFIO_MASKB_CLEAR) +#define bfin_write_PORTFIO_MASKB_CLEAR(val) bfin_write16(PORTFIO_MASKB_CLEAR, val) +#define bfin_read_PORTFIO_MASKB_SET() bfin_read16(PORTFIO_MASKB_SET) +#define bfin_write_PORTFIO_MASKB_SET(val) bfin_write16(PORTFIO_MASKB_SET, val) +#define bfin_read_PORTFIO_MASKB_TOGGLE() bfin_read16(PORTFIO_MASKB_TOGGLE) +#define bfin_write_PORTFIO_MASKB_TOGGLE(val) bfin_write16(PORTFIO_MASKB_TOGGLE, val) +#define bfin_read_PORTFIO_DIR() bfin_read16(PORTFIO_DIR) +#define bfin_write_PORTFIO_DIR(val) bfin_write16(PORTFIO_DIR, val) +#define bfin_read_PORTFIO_POLAR() bfin_read16(PORTFIO_POLAR) +#define bfin_write_PORTFIO_POLAR(val) bfin_write16(PORTFIO_POLAR, val) +#define bfin_read_PORTFIO_EDGE() bfin_read16(PORTFIO_EDGE) +#define bfin_write_PORTFIO_EDGE(val) bfin_write16(PORTFIO_EDGE, val) +#define bfin_read_PORTFIO_BOTH() bfin_read16(PORTFIO_BOTH) +#define bfin_write_PORTFIO_BOTH(val) bfin_write16(PORTFIO_BOTH, val) +#define bfin_read_PORTFIO_INEN() bfin_read16(PORTFIO_INEN) +#define bfin_write_PORTFIO_INEN(val) bfin_write16(PORTFIO_INEN, val) +#define bfin_read_SPORT0_TCR1() bfin_read16(SPORT0_TCR1) +#define bfin_write_SPORT0_TCR1(val) bfin_write16(SPORT0_TCR1, val) +#define bfin_read_SPORT0_TCR2() bfin_read16(SPORT0_TCR2) +#define bfin_write_SPORT0_TCR2(val) bfin_write16(SPORT0_TCR2, val) +#define bfin_read_SPORT0_TCLKDIV() bfin_read16(SPORT0_TCLKDIV) +#define bfin_write_SPORT0_TCLKDIV(val) bfin_write16(SPORT0_TCLKDIV, val) +#define bfin_read_SPORT0_TFSDIV() bfin_read16(SPORT0_TFSDIV) +#define bfin_write_SPORT0_TFSDIV(val) bfin_write16(SPORT0_TFSDIV, val) +#define bfin_write_SPORT0_TX(val) bfin_write32(SPORT0_TX, val) +#define bfin_read_SPORT0_RX() bfin_read32(SPORT0_RX) +#define bfin_write_SPORT0_RX(val) bfin_write32(SPORT0_RX, val) +#define bfin_read_SPORT0_RCR1() bfin_read16(SPORT0_RCR1) +#define bfin_write_SPORT0_RCR1(val) bfin_write16(SPORT0_RCR1, val) +#define bfin_read_SPORT0_RCR2() bfin_read16(SPORT0_RCR2) +#define bfin_write_SPORT0_RCR2(val) bfin_write16(SPORT0_RCR2, val) +#define bfin_read_SPORT0_RCLKDIV() bfin_read16(SPORT0_RCLKDIV) +#define bfin_write_SPORT0_RCLKDIV(val) bfin_write16(SPORT0_RCLKDIV, val) +#define bfin_read_SPORT0_RFSDIV() bfin_read16(SPORT0_RFSDIV) +#define bfin_write_SPORT0_RFSDIV(val) bfin_write16(SPORT0_RFSDIV, val) +#define bfin_read_SPORT0_STAT() bfin_read16(SPORT0_STAT) +#define bfin_write_SPORT0_STAT(val) bfin_write16(SPORT0_STAT, val) +#define bfin_read_SPORT0_CHNL() bfin_read16(SPORT0_CHNL) +#define bfin_write_SPORT0_CHNL(val) bfin_write16(SPORT0_CHNL, val) +#define bfin_read_SPORT0_MCMC1() bfin_read16(SPORT0_MCMC1) +#define bfin_write_SPORT0_MCMC1(val) bfin_write16(SPORT0_MCMC1, val) +#define bfin_read_SPORT0_MCMC2() bfin_read16(SPORT0_MCMC2) +#define bfin_write_SPORT0_MCMC2(val) bfin_write16(SPORT0_MCMC2, val) +#define bfin_read_SPORT0_MTCS0() bfin_read32(SPORT0_MTCS0) +#define bfin_write_SPORT0_MTCS0(val) bfin_write32(SPORT0_MTCS0, val) +#define bfin_read_SPORT0_MTCS1() bfin_read32(SPORT0_MTCS1) +#define bfin_write_SPORT0_MTCS1(val) bfin_write32(SPORT0_MTCS1, val) +#define bfin_read_SPORT0_MTCS2() bfin_read32(SPORT0_MTCS2) +#define bfin_write_SPORT0_MTCS2(val) bfin_write32(SPORT0_MTCS2, val) +#define bfin_read_SPORT0_MTCS3() bfin_read32(SPORT0_MTCS3) +#define bfin_write_SPORT0_MTCS3(val) bfin_write32(SPORT0_MTCS3, val) +#define bfin_read_SPORT0_MRCS0() bfin_read32(SPORT0_MRCS0) +#define bfin_write_SPORT0_MRCS0(val) bfin_write32(SPORT0_MRCS0, val) +#define bfin_read_SPORT0_MRCS1() bfin_read32(SPORT0_MRCS1) +#define bfin_write_SPORT0_MRCS1(val) bfin_write32(SPORT0_MRCS1, val) +#define bfin_read_SPORT0_MRCS2() bfin_read32(SPORT0_MRCS2) +#define bfin_write_SPORT0_MRCS2(val) bfin_write32(SPORT0_MRCS2, val) +#define bfin_read_SPORT0_MRCS3() bfin_read32(SPORT0_MRCS3) +#define bfin_write_SPORT0_MRCS3(val) bfin_write32(SPORT0_MRCS3, val) +#define bfin_read_SPORT1_TCR1() bfin_read16(SPORT1_TCR1) +#define bfin_write_SPORT1_TCR1(val) bfin_write16(SPORT1_TCR1, val) +#define bfin_read_SPORT1_TCR2() bfin_read16(SPORT1_TCR2) +#define bfin_write_SPORT1_TCR2(val) bfin_write16(SPORT1_TCR2, val) +#define bfin_read_SPORT1_TCLKDIV() bfin_read16(SPORT1_TCLKDIV) +#define bfin_write_SPORT1_TCLKDIV(val) bfin_write16(SPORT1_TCLKDIV, val) +#define bfin_read_SPORT1_TFSDIV() bfin_read16(SPORT1_TFSDIV) +#define bfin_write_SPORT1_TFSDIV(val) bfin_write16(SPORT1_TFSDIV, val) +#define bfin_write_SPORT1_TX(val) bfin_write32(SPORT1_TX, val) +#define bfin_read_SPORT1_RX() bfin_read32(SPORT1_RX) +#define bfin_write_SPORT1_RX(val) bfin_write32(SPORT1_RX, val) +#define bfin_read_SPORT1_RCR1() bfin_read16(SPORT1_RCR1) +#define bfin_write_SPORT1_RCR1(val) bfin_write16(SPORT1_RCR1, val) +#define bfin_read_SPORT1_RCR2() bfin_read16(SPORT1_RCR2) +#define bfin_write_SPORT1_RCR2(val) bfin_write16(SPORT1_RCR2, val) +#define bfin_read_SPORT1_RCLKDIV() bfin_read16(SPORT1_RCLKDIV) +#define bfin_write_SPORT1_RCLKDIV(val) bfin_write16(SPORT1_RCLKDIV, val) +#define bfin_read_SPORT1_RFSDIV() bfin_read16(SPORT1_RFSDIV) +#define bfin_write_SPORT1_RFSDIV(val) bfin_write16(SPORT1_RFSDIV, val) +#define bfin_read_SPORT1_STAT() bfin_read16(SPORT1_STAT) +#define bfin_write_SPORT1_STAT(val) bfin_write16(SPORT1_STAT, val) +#define bfin_read_SPORT1_CHNL() bfin_read16(SPORT1_CHNL) +#define bfin_write_SPORT1_CHNL(val) bfin_write16(SPORT1_CHNL, val) +#define bfin_read_SPORT1_MCMC1() bfin_read16(SPORT1_MCMC1) +#define bfin_write_SPORT1_MCMC1(val) bfin_write16(SPORT1_MCMC1, val) +#define bfin_read_SPORT1_MCMC2() bfin_read16(SPORT1_MCMC2) +#define bfin_write_SPORT1_MCMC2(val) bfin_write16(SPORT1_MCMC2, val) +#define bfin_read_SPORT1_MTCS0() bfin_read32(SPORT1_MTCS0) +#define bfin_write_SPORT1_MTCS0(val) bfin_write32(SPORT1_MTCS0, val) +#define bfin_read_SPORT1_MTCS1() bfin_read32(SPORT1_MTCS1) +#define bfin_write_SPORT1_MTCS1(val) bfin_write32(SPORT1_MTCS1, val) +#define bfin_read_SPORT1_MTCS2() bfin_read32(SPORT1_MTCS2) +#define bfin_write_SPORT1_MTCS2(val) bfin_write32(SPORT1_MTCS2, val) +#define bfin_read_SPORT1_MTCS3() bfin_read32(SPORT1_MTCS3) +#define bfin_write_SPORT1_MTCS3(val) bfin_write32(SPORT1_MTCS3, val) +#define bfin_read_SPORT1_MRCS0() bfin_read32(SPORT1_MRCS0) +#define bfin_write_SPORT1_MRCS0(val) bfin_write32(SPORT1_MRCS0, val) +#define bfin_read_SPORT1_MRCS1() bfin_read32(SPORT1_MRCS1) +#define bfin_write_SPORT1_MRCS1(val) bfin_write32(SPORT1_MRCS1, val) +#define bfin_read_SPORT1_MRCS2() bfin_read32(SPORT1_MRCS2) +#define bfin_write_SPORT1_MRCS2(val) bfin_write32(SPORT1_MRCS2, val) +#define bfin_read_SPORT1_MRCS3() bfin_read32(SPORT1_MRCS3) +#define bfin_write_SPORT1_MRCS3(val) bfin_write32(SPORT1_MRCS3, val) +#define bfin_read_EBIU_AMGCTL() bfin_read16(EBIU_AMGCTL) +#define bfin_write_EBIU_AMGCTL(val) bfin_write16(EBIU_AMGCTL, val) +#define bfin_read_EBIU_AMBCTL0() bfin_read32(EBIU_AMBCTL0) +#define bfin_write_EBIU_AMBCTL0(val) bfin_write32(EBIU_AMBCTL0, val) +#define bfin_read_EBIU_AMBCTL1() bfin_read32(EBIU_AMBCTL1) +#define bfin_write_EBIU_AMBCTL1(val) bfin_write32(EBIU_AMBCTL1, val) +#define bfin_read_EBIU_MODE() bfin_read16(EBIU_MODE) +#define bfin_write_EBIU_MODE(val) bfin_write16(EBIU_MODE, val) +#define bfin_read_EBIU_FCTL() bfin_read16(EBIU_FCTL) +#define bfin_write_EBIU_FCTL(val) bfin_write16(EBIU_FCTL, val) +#define bfin_read_DMA0_NEXT_DESC_PTR() bfin_readPTR(DMA0_NEXT_DESC_PTR) +#define bfin_write_DMA0_NEXT_DESC_PTR(val) bfin_writePTR(DMA0_NEXT_DESC_PTR, val) +#define bfin_read_DMA0_START_ADDR() bfin_readPTR(DMA0_START_ADDR) +#define bfin_write_DMA0_START_ADDR(val) bfin_writePTR(DMA0_START_ADDR, val) +#define bfin_read_DMA0_CONFIG() bfin_read16(DMA0_CONFIG) +#define bfin_write_DMA0_CONFIG(val) bfin_write16(DMA0_CONFIG, val) +#define bfin_read_DMA0_X_COUNT() bfin_read16(DMA0_X_COUNT) +#define bfin_write_DMA0_X_COUNT(val) bfin_write16(DMA0_X_COUNT, val) +#define bfin_read_DMA0_X_MODIFY() bfin_read16(DMA0_X_MODIFY) +#define bfin_write_DMA0_X_MODIFY(val) bfin_write16(DMA0_X_MODIFY, val) +#define bfin_read_DMA0_Y_COUNT() bfin_read16(DMA0_Y_COUNT) +#define bfin_write_DMA0_Y_COUNT(val) bfin_write16(DMA0_Y_COUNT, val) +#define bfin_read_DMA0_Y_MODIFY() bfin_read16(DMA0_Y_MODIFY) +#define bfin_write_DMA0_Y_MODIFY(val) bfin_write16(DMA0_Y_MODIFY, val) +#define bfin_read_DMA0_CURR_DESC_PTR() bfin_readPTR(DMA0_CURR_DESC_PTR) +#define bfin_write_DMA0_CURR_DESC_PTR(val) bfin_writePTR(DMA0_CURR_DESC_PTR, val) +#define bfin_read_DMA0_CURR_ADDR() bfin_readPTR(DMA0_CURR_ADDR) +#define bfin_write_DMA0_CURR_ADDR(val) bfin_writePTR(DMA0_CURR_ADDR, val) +#define bfin_read_DMA0_IRQ_STATUS() bfin_read16(DMA0_IRQ_STATUS) +#define bfin_write_DMA0_IRQ_STATUS(val) bfin_write16(DMA0_IRQ_STATUS, val) +#define bfin_read_DMA0_PERIPHERAL_MAP() bfin_read16(DMA0_PERIPHERAL_MAP) +#define bfin_write_DMA0_PERIPHERAL_MAP(val) bfin_write16(DMA0_PERIPHERAL_MAP, val) +#define bfin_read_DMA0_CURR_X_COUNT() bfin_read16(DMA0_CURR_X_COUNT) +#define bfin_write_DMA0_CURR_X_COUNT(val) bfin_write16(DMA0_CURR_X_COUNT, val) +#define bfin_read_DMA0_CURR_Y_COUNT() bfin_read16(DMA0_CURR_Y_COUNT) +#define bfin_write_DMA0_CURR_Y_COUNT(val) bfin_write16(DMA0_CURR_Y_COUNT, val) +#define bfin_read_DMA1_NEXT_DESC_PTR() bfin_readPTR(DMA1_NEXT_DESC_PTR) +#define bfin_write_DMA1_NEXT_DESC_PTR(val) bfin_writePTR(DMA1_NEXT_DESC_PTR, val) +#define bfin_read_DMA1_START_ADDR() bfin_readPTR(DMA1_START_ADDR) +#define bfin_write_DMA1_START_ADDR(val) bfin_writePTR(DMA1_START_ADDR, val) +#define bfin_read_DMA1_CONFIG() bfin_read16(DMA1_CONFIG) +#define bfin_write_DMA1_CONFIG(val) bfin_write16(DMA1_CONFIG, val) +#define bfin_read_DMA1_X_COUNT() bfin_read16(DMA1_X_COUNT) +#define bfin_write_DMA1_X_COUNT(val) bfin_write16(DMA1_X_COUNT, val) +#define bfin_read_DMA1_X_MODIFY() bfin_read16(DMA1_X_MODIFY) +#define bfin_write_DMA1_X_MODIFY(val) bfin_write16(DMA1_X_MODIFY, val) +#define bfin_read_DMA1_Y_COUNT() bfin_read16(DMA1_Y_COUNT) +#define bfin_write_DMA1_Y_COUNT(val) bfin_write16(DMA1_Y_COUNT, val) +#define bfin_read_DMA1_Y_MODIFY() bfin_read16(DMA1_Y_MODIFY) +#define bfin_write_DMA1_Y_MODIFY(val) bfin_write16(DMA1_Y_MODIFY, val) +#define bfin_read_DMA1_CURR_DESC_PTR() bfin_readPTR(DMA1_CURR_DESC_PTR) +#define bfin_write_DMA1_CURR_DESC_PTR(val) bfin_writePTR(DMA1_CURR_DESC_PTR, val) +#define bfin_read_DMA1_CURR_ADDR() bfin_readPTR(DMA1_CURR_ADDR) +#define bfin_write_DMA1_CURR_ADDR(val) bfin_writePTR(DMA1_CURR_ADDR, val) +#define bfin_read_DMA1_IRQ_STATUS() bfin_read16(DMA1_IRQ_STATUS) +#define bfin_write_DMA1_IRQ_STATUS(val) bfin_write16(DMA1_IRQ_STATUS, val) +#define bfin_read_DMA1_PERIPHERAL_MAP() bfin_read16(DMA1_PERIPHERAL_MAP) +#define bfin_write_DMA1_PERIPHERAL_MAP(val) bfin_write16(DMA1_PERIPHERAL_MAP, val) +#define bfin_read_DMA1_CURR_X_COUNT() bfin_read16(DMA1_CURR_X_COUNT) +#define bfin_write_DMA1_CURR_X_COUNT(val) bfin_write16(DMA1_CURR_X_COUNT, val) +#define bfin_read_DMA1_CURR_Y_COUNT() bfin_read16(DMA1_CURR_Y_COUNT) +#define bfin_write_DMA1_CURR_Y_COUNT(val) bfin_write16(DMA1_CURR_Y_COUNT, val) +#define bfin_read_DMA2_NEXT_DESC_PTR() bfin_readPTR(DMA2_NEXT_DESC_PTR) +#define bfin_write_DMA2_NEXT_DESC_PTR(val) bfin_writePTR(DMA2_NEXT_DESC_PTR, val) +#define bfin_read_DMA2_START_ADDR() bfin_readPTR(DMA2_START_ADDR) +#define bfin_write_DMA2_START_ADDR(val) bfin_writePTR(DMA2_START_ADDR, val) +#define bfin_read_DMA2_CONFIG() bfin_read16(DMA2_CONFIG) +#define bfin_write_DMA2_CONFIG(val) bfin_write16(DMA2_CONFIG, val) +#define bfin_read_DMA2_X_COUNT() bfin_read16(DMA2_X_COUNT) +#define bfin_write_DMA2_X_COUNT(val) bfin_write16(DMA2_X_COUNT, val) +#define bfin_read_DMA2_X_MODIFY() bfin_read16(DMA2_X_MODIFY) +#define bfin_write_DMA2_X_MODIFY(val) bfin_write16(DMA2_X_MODIFY, val) +#define bfin_read_DMA2_Y_COUNT() bfin_read16(DMA2_Y_COUNT) +#define bfin_write_DMA2_Y_COUNT(val) bfin_write16(DMA2_Y_COUNT, val) +#define bfin_read_DMA2_Y_MODIFY() bfin_read16(DMA2_Y_MODIFY) +#define bfin_write_DMA2_Y_MODIFY(val) bfin_write16(DMA2_Y_MODIFY, val) +#define bfin_read_DMA2_CURR_DESC_PTR() bfin_readPTR(DMA2_CURR_DESC_PTR) +#define bfin_write_DMA2_CURR_DESC_PTR(val) bfin_writePTR(DMA2_CURR_DESC_PTR, val) +#define bfin_read_DMA2_CURR_ADDR() bfin_readPTR(DMA2_CURR_ADDR) +#define bfin_write_DMA2_CURR_ADDR(val) bfin_writePTR(DMA2_CURR_ADDR, val) +#define bfin_read_DMA2_IRQ_STATUS() bfin_read16(DMA2_IRQ_STATUS) +#define bfin_write_DMA2_IRQ_STATUS(val) bfin_write16(DMA2_IRQ_STATUS, val) +#define bfin_read_DMA2_PERIPHERAL_MAP() bfin_read16(DMA2_PERIPHERAL_MAP) +#define bfin_write_DMA2_PERIPHERAL_MAP(val) bfin_write16(DMA2_PERIPHERAL_MAP, val) +#define bfin_read_DMA2_CURR_X_COUNT() bfin_read16(DMA2_CURR_X_COUNT) +#define bfin_write_DMA2_CURR_X_COUNT(val) bfin_write16(DMA2_CURR_X_COUNT, val) +#define bfin_read_DMA2_CURR_Y_COUNT() bfin_read16(DMA2_CURR_Y_COUNT) +#define bfin_write_DMA2_CURR_Y_COUNT(val) bfin_write16(DMA2_CURR_Y_COUNT, val) +#define bfin_read_DMA3_NEXT_DESC_PTR() bfin_readPTR(DMA3_NEXT_DESC_PTR) +#define bfin_write_DMA3_NEXT_DESC_PTR(val) bfin_writePTR(DMA3_NEXT_DESC_PTR, val) +#define bfin_read_DMA3_START_ADDR() bfin_readPTR(DMA3_START_ADDR) +#define bfin_write_DMA3_START_ADDR(val) bfin_writePTR(DMA3_START_ADDR, val) +#define bfin_read_DMA3_CONFIG() bfin_read16(DMA3_CONFIG) +#define bfin_write_DMA3_CONFIG(val) bfin_write16(DMA3_CONFIG, val) +#define bfin_read_DMA3_X_COUNT() bfin_read16(DMA3_X_COUNT) +#define bfin_write_DMA3_X_COUNT(val) bfin_write16(DMA3_X_COUNT, val) +#define bfin_read_DMA3_X_MODIFY() bfin_read16(DMA3_X_MODIFY) +#define bfin_write_DMA3_X_MODIFY(val) bfin_write16(DMA3_X_MODIFY, val) +#define bfin_read_DMA3_Y_COUNT() bfin_read16(DMA3_Y_COUNT) +#define bfin_write_DMA3_Y_COUNT(val) bfin_write16(DMA3_Y_COUNT, val) +#define bfin_read_DMA3_Y_MODIFY() bfin_read16(DMA3_Y_MODIFY) +#define bfin_write_DMA3_Y_MODIFY(val) bfin_write16(DMA3_Y_MODIFY, val) +#define bfin_read_DMA3_CURR_DESC_PTR() bfin_readPTR(DMA3_CURR_DESC_PTR) +#define bfin_write_DMA3_CURR_DESC_PTR(val) bfin_writePTR(DMA3_CURR_DESC_PTR, val) +#define bfin_read_DMA3_CURR_ADDR() bfin_readPTR(DMA3_CURR_ADDR) +#define bfin_write_DMA3_CURR_ADDR(val) bfin_writePTR(DMA3_CURR_ADDR, val) +#define bfin_read_DMA3_IRQ_STATUS() bfin_read16(DMA3_IRQ_STATUS) +#define bfin_write_DMA3_IRQ_STATUS(val) bfin_write16(DMA3_IRQ_STATUS, val) +#define bfin_read_DMA3_PERIPHERAL_MAP() bfin_read16(DMA3_PERIPHERAL_MAP) +#define bfin_write_DMA3_PERIPHERAL_MAP(val) bfin_write16(DMA3_PERIPHERAL_MAP, val) +#define bfin_read_DMA3_CURR_X_COUNT() bfin_read16(DMA3_CURR_X_COUNT) +#define bfin_write_DMA3_CURR_X_COUNT(val) bfin_write16(DMA3_CURR_X_COUNT, val) +#define bfin_read_DMA3_CURR_Y_COUNT() bfin_read16(DMA3_CURR_Y_COUNT) +#define bfin_write_DMA3_CURR_Y_COUNT(val) bfin_write16(DMA3_CURR_Y_COUNT, val) +#define bfin_read_DMA4_NEXT_DESC_PTR() bfin_readPTR(DMA4_NEXT_DESC_PTR) +#define bfin_write_DMA4_NEXT_DESC_PTR(val) bfin_writePTR(DMA4_NEXT_DESC_PTR, val) +#define bfin_read_DMA4_START_ADDR() bfin_readPTR(DMA4_START_ADDR) +#define bfin_write_DMA4_START_ADDR(val) bfin_writePTR(DMA4_START_ADDR, val) +#define bfin_read_DMA4_CONFIG() bfin_read16(DMA4_CONFIG) +#define bfin_write_DMA4_CONFIG(val) bfin_write16(DMA4_CONFIG, val) +#define bfin_read_DMA4_X_COUNT() bfin_read16(DMA4_X_COUNT) +#define bfin_write_DMA4_X_COUNT(val) bfin_write16(DMA4_X_COUNT, val) +#define bfin_read_DMA4_X_MODIFY() bfin_read16(DMA4_X_MODIFY) +#define bfin_write_DMA4_X_MODIFY(val) bfin_write16(DMA4_X_MODIFY, val) +#define bfin_read_DMA4_Y_COUNT() bfin_read16(DMA4_Y_COUNT) +#define bfin_write_DMA4_Y_COUNT(val) bfin_write16(DMA4_Y_COUNT, val) +#define bfin_read_DMA4_Y_MODIFY() bfin_read16(DMA4_Y_MODIFY) +#define bfin_write_DMA4_Y_MODIFY(val) bfin_write16(DMA4_Y_MODIFY, val) +#define bfin_read_DMA4_CURR_DESC_PTR() bfin_readPTR(DMA4_CURR_DESC_PTR) +#define bfin_write_DMA4_CURR_DESC_PTR(val) bfin_writePTR(DMA4_CURR_DESC_PTR, val) +#define bfin_read_DMA4_CURR_ADDR() bfin_readPTR(DMA4_CURR_ADDR) +#define bfin_write_DMA4_CURR_ADDR(val) bfin_writePTR(DMA4_CURR_ADDR, val) +#define bfin_read_DMA4_IRQ_STATUS() bfin_read16(DMA4_IRQ_STATUS) +#define bfin_write_DMA4_IRQ_STATUS(val) bfin_write16(DMA4_IRQ_STATUS, val) +#define bfin_read_DMA4_PERIPHERAL_MAP() bfin_read16(DMA4_PERIPHERAL_MAP) +#define bfin_write_DMA4_PERIPHERAL_MAP(val) bfin_write16(DMA4_PERIPHERAL_MAP, val) +#define bfin_read_DMA4_CURR_X_COUNT() bfin_read16(DMA4_CURR_X_COUNT) +#define bfin_write_DMA4_CURR_X_COUNT(val) bfin_write16(DMA4_CURR_X_COUNT, val) +#define bfin_read_DMA4_CURR_Y_COUNT() bfin_read16(DMA4_CURR_Y_COUNT) +#define bfin_write_DMA4_CURR_Y_COUNT(val) bfin_write16(DMA4_CURR_Y_COUNT, val) +#define bfin_read_DMA5_NEXT_DESC_PTR() bfin_readPTR(DMA5_NEXT_DESC_PTR) +#define bfin_write_DMA5_NEXT_DESC_PTR(val) bfin_writePTR(DMA5_NEXT_DESC_PTR, val) +#define bfin_read_DMA5_START_ADDR() bfin_readPTR(DMA5_START_ADDR) +#define bfin_write_DMA5_START_ADDR(val) bfin_writePTR(DMA5_START_ADDR, val) +#define bfin_read_DMA5_CONFIG() bfin_read16(DMA5_CONFIG) +#define bfin_write_DMA5_CONFIG(val) bfin_write16(DMA5_CONFIG, val) +#define bfin_read_DMA5_X_COUNT() bfin_read16(DMA5_X_COUNT) +#define bfin_write_DMA5_X_COUNT(val) bfin_write16(DMA5_X_COUNT, val) +#define bfin_read_DMA5_X_MODIFY() bfin_read16(DMA5_X_MODIFY) +#define bfin_write_DMA5_X_MODIFY(val) bfin_write16(DMA5_X_MODIFY, val) +#define bfin_read_DMA5_Y_COUNT() bfin_read16(DMA5_Y_COUNT) +#define bfin_write_DMA5_Y_COUNT(val) bfin_write16(DMA5_Y_COUNT, val) +#define bfin_read_DMA5_Y_MODIFY() bfin_read16(DMA5_Y_MODIFY) +#define bfin_write_DMA5_Y_MODIFY(val) bfin_write16(DMA5_Y_MODIFY, val) +#define bfin_read_DMA5_CURR_DESC_PTR() bfin_readPTR(DMA5_CURR_DESC_PTR) +#define bfin_write_DMA5_CURR_DESC_PTR(val) bfin_writePTR(DMA5_CURR_DESC_PTR, val) +#define bfin_read_DMA5_CURR_ADDR() bfin_readPTR(DMA5_CURR_ADDR) +#define bfin_write_DMA5_CURR_ADDR(val) bfin_writePTR(DMA5_CURR_ADDR, val) +#define bfin_read_DMA5_IRQ_STATUS() bfin_read16(DMA5_IRQ_STATUS) +#define bfin_write_DMA5_IRQ_STATUS(val) bfin_write16(DMA5_IRQ_STATUS, val) +#define bfin_read_DMA5_PERIPHERAL_MAP() bfin_read16(DMA5_PERIPHERAL_MAP) +#define bfin_write_DMA5_PERIPHERAL_MAP(val) bfin_write16(DMA5_PERIPHERAL_MAP, val) +#define bfin_read_DMA5_CURR_X_COUNT() bfin_read16(DMA5_CURR_X_COUNT) +#define bfin_write_DMA5_CURR_X_COUNT(val) bfin_write16(DMA5_CURR_X_COUNT, val) +#define bfin_read_DMA5_CURR_Y_COUNT() bfin_read16(DMA5_CURR_Y_COUNT) +#define bfin_write_DMA5_CURR_Y_COUNT(val) bfin_write16(DMA5_CURR_Y_COUNT, val) +#define bfin_read_DMA6_NEXT_DESC_PTR() bfin_read32(DMA6_NEXT_DESC_PTR) +#define bfin_write_DMA6_NEXT_DESC_PTR(val) bfin_write32(DMA6_NEXT_DESC_PTR, val) +#define bfin_read_DMA6_START_ADDR() bfin_readPTR(DMA6_START_ADDR) +#define bfin_write_DMA6_START_ADDR(val) bfin_writePTR(DMA6_START_ADDR, val) +#define bfin_read_DMA6_CONFIG() bfin_read16(DMA6_CONFIG) +#define bfin_write_DMA6_CONFIG(val) bfin_write16(DMA6_CONFIG, val) +#define bfin_read_DMA6_X_COUNT() bfin_read16(DMA6_X_COUNT) +#define bfin_write_DMA6_X_COUNT(val) bfin_write16(DMA6_X_COUNT, val) +#define bfin_read_DMA6_X_MODIFY() bfin_read16(DMA6_X_MODIFY) +#define bfin_write_DMA6_X_MODIFY(val) bfin_write16(DMA6_X_MODIFY, val) +#define bfin_read_DMA6_Y_COUNT() bfin_read16(DMA6_Y_COUNT) +#define bfin_write_DMA6_Y_COUNT(val) bfin_write16(DMA6_Y_COUNT, val) +#define bfin_read_DMA6_Y_MODIFY() bfin_read16(DMA6_Y_MODIFY) +#define bfin_write_DMA6_Y_MODIFY(val) bfin_write16(DMA6_Y_MODIFY, val) +#define bfin_read_DMA6_CURR_DESC_PTR() bfin_readPTR(DMA6_CURR_DESC_PTR) +#define bfin_write_DMA6_CURR_DESC_PTR(val) bfin_writePTR(DMA6_CURR_DESC_PTR, val) +#define bfin_read_DMA6_CURR_ADDR() bfin_readPTR(DMA6_CURR_ADDR) +#define bfin_write_DMA6_CURR_ADDR(val) bfin_writePTR(DMA6_CURR_ADDR, val) +#define bfin_read_DMA6_IRQ_STATUS() bfin_read16(DMA6_IRQ_STATUS) +#define bfin_write_DMA6_IRQ_STATUS(val) bfin_write16(DMA6_IRQ_STATUS, val) +#define bfin_read_DMA6_PERIPHERAL_MAP() bfin_read16(DMA6_PERIPHERAL_MAP) +#define bfin_write_DMA6_PERIPHERAL_MAP(val) bfin_write16(DMA6_PERIPHERAL_MAP, val) +#define bfin_read_DMA6_CURR_X_COUNT() bfin_read16(DMA6_CURR_X_COUNT) +#define bfin_write_DMA6_CURR_X_COUNT(val) bfin_write16(DMA6_CURR_X_COUNT, val) +#define bfin_read_DMA6_CURR_Y_COUNT() bfin_read16(DMA6_CURR_Y_COUNT) +#define bfin_write_DMA6_CURR_Y_COUNT(val) bfin_write16(DMA6_CURR_Y_COUNT, val) +#define bfin_read_DMA7_NEXT_DESC_PTR() bfin_readPTR(DMA7_NEXT_DESC_PTR) +#define bfin_write_DMA7_NEXT_DESC_PTR(val) bfin_writePTR(DMA7_NEXT_DESC_PTR, val) +#define bfin_read_DMA7_START_ADDR() bfin_readPTR(DMA7_START_ADDR) +#define bfin_write_DMA7_START_ADDR(val) bfin_writePTR(DMA7_START_ADDR, val) +#define bfin_read_DMA7_CONFIG() bfin_read16(DMA7_CONFIG) +#define bfin_write_DMA7_CONFIG(val) bfin_write16(DMA7_CONFIG, val) +#define bfin_read_DMA7_X_COUNT() bfin_read16(DMA7_X_COUNT) +#define bfin_write_DMA7_X_COUNT(val) bfin_write16(DMA7_X_COUNT, val) +#define bfin_read_DMA7_X_MODIFY() bfin_read16(DMA7_X_MODIFY) +#define bfin_write_DMA7_X_MODIFY(val) bfin_write16(DMA7_X_MODIFY, val) +#define bfin_read_DMA7_Y_COUNT() bfin_read16(DMA7_Y_COUNT) +#define bfin_write_DMA7_Y_COUNT(val) bfin_write16(DMA7_Y_COUNT, val) +#define bfin_read_DMA7_Y_MODIFY() bfin_read16(DMA7_Y_MODIFY) +#define bfin_write_DMA7_Y_MODIFY(val) bfin_write16(DMA7_Y_MODIFY, val) +#define bfin_read_DMA7_CURR_DESC_PTR() bfin_readPTR(DMA7_CURR_DESC_PTR) +#define bfin_write_DMA7_CURR_DESC_PTR(val) bfin_writePTR(DMA7_CURR_DESC_PTR, val) +#define bfin_read_DMA7_CURR_ADDR() bfin_readPTR(DMA7_CURR_ADDR) +#define bfin_write_DMA7_CURR_ADDR(val) bfin_writePTR(DMA7_CURR_ADDR, val) +#define bfin_read_DMA7_IRQ_STATUS() bfin_read16(DMA7_IRQ_STATUS) +#define bfin_write_DMA7_IRQ_STATUS(val) bfin_write16(DMA7_IRQ_STATUS, val) +#define bfin_read_DMA7_PERIPHERAL_MAP() bfin_read16(DMA7_PERIPHERAL_MAP) +#define bfin_write_DMA7_PERIPHERAL_MAP(val) bfin_write16(DMA7_PERIPHERAL_MAP, val) +#define bfin_read_DMA7_CURR_X_COUNT() bfin_read16(DMA7_CURR_X_COUNT) +#define bfin_write_DMA7_CURR_X_COUNT(val) bfin_write16(DMA7_CURR_X_COUNT, val) +#define bfin_read_DMA7_CURR_Y_COUNT() bfin_read16(DMA7_CURR_Y_COUNT) +#define bfin_write_DMA7_CURR_Y_COUNT(val) bfin_write16(DMA7_CURR_Y_COUNT, val) +#define bfin_read_DMA8_NEXT_DESC_PTR() bfin_readPTR(DMA8_NEXT_DESC_PTR) +#define bfin_write_DMA8_NEXT_DESC_PTR(val) bfin_writePTR(DMA8_NEXT_DESC_PTR, val) +#define bfin_read_DMA8_START_ADDR() bfin_readPTR(DMA8_START_ADDR) +#define bfin_write_DMA8_START_ADDR(val) bfin_writePTR(DMA8_START_ADDR, val) +#define bfin_read_DMA8_CONFIG() bfin_read16(DMA8_CONFIG) +#define bfin_write_DMA8_CONFIG(val) bfin_write16(DMA8_CONFIG, val) +#define bfin_read_DMA8_X_COUNT() bfin_read16(DMA8_X_COUNT) +#define bfin_write_DMA8_X_COUNT(val) bfin_write16(DMA8_X_COUNT, val) +#define bfin_read_DMA8_X_MODIFY() bfin_read16(DMA8_X_MODIFY) +#define bfin_write_DMA8_X_MODIFY(val) bfin_write16(DMA8_X_MODIFY, val) +#define bfin_read_DMA8_Y_COUNT() bfin_read16(DMA8_Y_COUNT) +#define bfin_write_DMA8_Y_COUNT(val) bfin_write16(DMA8_Y_COUNT, val) +#define bfin_read_DMA8_Y_MODIFY() bfin_read16(DMA8_Y_MODIFY) +#define bfin_write_DMA8_Y_MODIFY(val) bfin_write16(DMA8_Y_MODIFY, val) +#define bfin_read_DMA8_CURR_DESC_PTR() bfin_readPTR(DMA8_CURR_DESC_PTR) +#define bfin_write_DMA8_CURR_DESC_PTR(val) bfin_writePTR(DMA8_CURR_DESC_PTR, val) +#define bfin_read_DMA8_CURR_ADDR() bfin_readPTR(DMA8_CURR_ADDR) +#define bfin_write_DMA8_CURR_ADDR(val) bfin_writePTR(DMA8_CURR_ADDR, val) +#define bfin_read_DMA8_IRQ_STATUS() bfin_read16(DMA8_IRQ_STATUS) +#define bfin_write_DMA8_IRQ_STATUS(val) bfin_write16(DMA8_IRQ_STATUS, val) +#define bfin_read_DMA8_PERIPHERAL_MAP() bfin_read16(DMA8_PERIPHERAL_MAP) +#define bfin_write_DMA8_PERIPHERAL_MAP(val) bfin_write16(DMA8_PERIPHERAL_MAP, val) +#define bfin_read_DMA8_CURR_X_COUNT() bfin_read16(DMA8_CURR_X_COUNT) +#define bfin_write_DMA8_CURR_X_COUNT(val) bfin_write16(DMA8_CURR_X_COUNT, val) +#define bfin_read_DMA8_CURR_Y_COUNT() bfin_read16(DMA8_CURR_Y_COUNT) +#define bfin_write_DMA8_CURR_Y_COUNT(val) bfin_write16(DMA8_CURR_Y_COUNT, val) +#define bfin_read_DMA9_NEXT_DESC_PTR() bfin_readPTR(DMA9_NEXT_DESC_PTR) +#define bfin_write_DMA9_NEXT_DESC_PTR(val) bfin_writePTR(DMA9_NEXT_DESC_PTR, val) +#define bfin_read_DMA9_START_ADDR() bfin_readPTR(DMA9_START_ADDR) +#define bfin_write_DMA9_START_ADDR(val) bfin_writePTR(DMA9_START_ADDR, val) +#define bfin_read_DMA9_CONFIG() bfin_read16(DMA9_CONFIG) +#define bfin_write_DMA9_CONFIG(val) bfin_write16(DMA9_CONFIG, val) +#define bfin_read_DMA9_X_COUNT() bfin_read16(DMA9_X_COUNT) +#define bfin_write_DMA9_X_COUNT(val) bfin_write16(DMA9_X_COUNT, val) +#define bfin_read_DMA9_X_MODIFY() bfin_read16(DMA9_X_MODIFY) +#define bfin_write_DMA9_X_MODIFY(val) bfin_write16(DMA9_X_MODIFY, val) +#define bfin_read_DMA9_Y_COUNT() bfin_read16(DMA9_Y_COUNT) +#define bfin_write_DMA9_Y_COUNT(val) bfin_write16(DMA9_Y_COUNT, val) +#define bfin_read_DMA9_Y_MODIFY() bfin_read16(DMA9_Y_MODIFY) +#define bfin_write_DMA9_Y_MODIFY(val) bfin_write16(DMA9_Y_MODIFY, val) +#define bfin_read_DMA9_CURR_DESC_PTR() bfin_readPTR(DMA9_CURR_DESC_PTR) +#define bfin_write_DMA9_CURR_DESC_PTR(val) bfin_writePTR(DMA9_CURR_DESC_PTR, val) +#define bfin_read_DMA9_CURR_ADDR() bfin_readPTR(DMA9_CURR_ADDR) +#define bfin_write_DMA9_CURR_ADDR(val) bfin_writePTR(DMA9_CURR_ADDR, val) +#define bfin_read_DMA9_IRQ_STATUS() bfin_read16(DMA9_IRQ_STATUS) +#define bfin_write_DMA9_IRQ_STATUS(val) bfin_write16(DMA9_IRQ_STATUS, val) +#define bfin_read_DMA9_PERIPHERAL_MAP() bfin_read16(DMA9_PERIPHERAL_MAP) +#define bfin_write_DMA9_PERIPHERAL_MAP(val) bfin_write16(DMA9_PERIPHERAL_MAP, val) +#define bfin_read_DMA9_CURR_X_COUNT() bfin_read16(DMA9_CURR_X_COUNT) +#define bfin_write_DMA9_CURR_X_COUNT(val) bfin_write16(DMA9_CURR_X_COUNT, val) +#define bfin_read_DMA9_CURR_Y_COUNT() bfin_read16(DMA9_CURR_Y_COUNT) +#define bfin_write_DMA9_CURR_Y_COUNT(val) bfin_write16(DMA9_CURR_Y_COUNT, val) +#define bfin_read_DMA10_NEXT_DESC_PTR() bfin_readPTR(DMA10_NEXT_DESC_PTR) +#define bfin_write_DMA10_NEXT_DESC_PTR(val) bfin_writePTR(DMA10_NEXT_DESC_PTR, val) +#define bfin_read_DMA10_START_ADDR() bfin_readPTR(DMA10_START_ADDR) +#define bfin_write_DMA10_START_ADDR(val) bfin_writePTR(DMA10_START_ADDR, val) +#define bfin_read_DMA10_CONFIG() bfin_read16(DMA10_CONFIG) +#define bfin_write_DMA10_CONFIG(val) bfin_write16(DMA10_CONFIG, val) +#define bfin_read_DMA10_X_COUNT() bfin_read16(DMA10_X_COUNT) +#define bfin_write_DMA10_X_COUNT(val) bfin_write16(DMA10_X_COUNT, val) +#define bfin_read_DMA10_X_MODIFY() bfin_read16(DMA10_X_MODIFY) +#define bfin_write_DMA10_X_MODIFY(val) bfin_write16(DMA10_X_MODIFY, val) +#define bfin_read_DMA10_Y_COUNT() bfin_read16(DMA10_Y_COUNT) +#define bfin_write_DMA10_Y_COUNT(val) bfin_write16(DMA10_Y_COUNT, val) +#define bfin_read_DMA10_Y_MODIFY() bfin_read16(DMA10_Y_MODIFY) +#define bfin_write_DMA10_Y_MODIFY(val) bfin_write16(DMA10_Y_MODIFY, val) +#define bfin_read_DMA10_CURR_DESC_PTR() bfin_readPTR(DMA10_CURR_DESC_PTR) +#define bfin_write_DMA10_CURR_DESC_PTR(val) bfin_writePTR(DMA10_CURR_DESC_PTR, val) +#define bfin_read_DMA10_CURR_ADDR() bfin_readPTR(DMA10_CURR_ADDR) +#define bfin_write_DMA10_CURR_ADDR(val) bfin_writePTR(DMA10_CURR_ADDR, val) +#define bfin_read_DMA10_IRQ_STATUS() bfin_read16(DMA10_IRQ_STATUS) +#define bfin_write_DMA10_IRQ_STATUS(val) bfin_write16(DMA10_IRQ_STATUS, val) +#define bfin_read_DMA10_PERIPHERAL_MAP() bfin_read16(DMA10_PERIPHERAL_MAP) +#define bfin_write_DMA10_PERIPHERAL_MAP(val) bfin_write16(DMA10_PERIPHERAL_MAP, val) +#define bfin_read_DMA10_CURR_X_COUNT() bfin_read16(DMA10_CURR_X_COUNT) +#define bfin_write_DMA10_CURR_X_COUNT(val) bfin_write16(DMA10_CURR_X_COUNT, val) +#define bfin_read_DMA10_CURR_Y_COUNT() bfin_read16(DMA10_CURR_Y_COUNT) +#define bfin_write_DMA10_CURR_Y_COUNT(val) bfin_write16(DMA10_CURR_Y_COUNT, val) +#define bfin_read_DMA11_NEXT_DESC_PTR() bfin_readPTR(DMA11_NEXT_DESC_PTR) +#define bfin_write_DMA11_NEXT_DESC_PTR(val) bfin_writePTR(DMA11_NEXT_DESC_PTR, val) +#define bfin_read_DMA11_START_ADDR() bfin_readPTR(DMA11_START_ADDR) +#define bfin_write_DMA11_START_ADDR(val) bfin_writePTR(DMA11_START_ADDR, val) +#define bfin_read_DMA11_CONFIG() bfin_read16(DMA11_CONFIG) +#define bfin_write_DMA11_CONFIG(val) bfin_write16(DMA11_CONFIG, val) +#define bfin_read_DMA11_X_COUNT() bfin_read16(DMA11_X_COUNT) +#define bfin_write_DMA11_X_COUNT(val) bfin_write16(DMA11_X_COUNT, val) +#define bfin_read_DMA11_X_MODIFY() bfin_read16(DMA11_X_MODIFY) +#define bfin_write_DMA11_X_MODIFY(val) bfin_write16(DMA11_X_MODIFY, val) +#define bfin_read_DMA11_Y_COUNT() bfin_read16(DMA11_Y_COUNT) +#define bfin_write_DMA11_Y_COUNT(val) bfin_write16(DMA11_Y_COUNT, val) +#define bfin_read_DMA11_Y_MODIFY() bfin_read16(DMA11_Y_MODIFY) +#define bfin_write_DMA11_Y_MODIFY(val) bfin_write16(DMA11_Y_MODIFY, val) +#define bfin_read_DMA11_CURR_DESC_PTR() bfin_readPTR(DMA11_CURR_DESC_PTR) +#define bfin_write_DMA11_CURR_DESC_PTR(val) bfin_writePTR(DMA11_CURR_DESC_PTR, val) +#define bfin_read_DMA11_CURR_ADDR() bfin_readPTR(DMA11_CURR_ADDR) +#define bfin_write_DMA11_CURR_ADDR(val) bfin_writePTR(DMA11_CURR_ADDR, val) +#define bfin_read_DMA11_IRQ_STATUS() bfin_read16(DMA11_IRQ_STATUS) +#define bfin_write_DMA11_IRQ_STATUS(val) bfin_write16(DMA11_IRQ_STATUS, val) +#define bfin_read_DMA11_PERIPHERAL_MAP() bfin_read16(DMA11_PERIPHERAL_MAP) +#define bfin_write_DMA11_PERIPHERAL_MAP(val) bfin_write16(DMA11_PERIPHERAL_MAP, val) +#define bfin_read_DMA11_CURR_X_COUNT() bfin_read16(DMA11_CURR_X_COUNT) +#define bfin_write_DMA11_CURR_X_COUNT(val) bfin_write16(DMA11_CURR_X_COUNT, val) +#define bfin_read_DMA11_CURR_Y_COUNT() bfin_read16(DMA11_CURR_Y_COUNT) +#define bfin_write_DMA11_CURR_Y_COUNT(val) bfin_write16(DMA11_CURR_Y_COUNT, val) +#define bfin_read_MDMA_S0_NEXT_DESC_PTR() bfin_readPTR(MDMA_S0_NEXT_DESC_PTR) +#define bfin_write_MDMA_S0_NEXT_DESC_PTR(val) bfin_writePTR(MDMA_S0_NEXT_DESC_PTR, val) +#define bfin_read_MDMA_S0_START_ADDR() bfin_readPTR(MDMA_S0_START_ADDR) +#define bfin_write_MDMA_S0_START_ADDR(val) bfin_writePTR(MDMA_S0_START_ADDR, val) +#define bfin_read_MDMA_S0_CONFIG() bfin_read16(MDMA_S0_CONFIG) +#define bfin_write_MDMA_S0_CONFIG(val) bfin_write16(MDMA_S0_CONFIG, val) +#define bfin_read_MDMA_S0_X_COUNT() bfin_read16(MDMA_S0_X_COUNT) +#define bfin_write_MDMA_S0_X_COUNT(val) bfin_write16(MDMA_S0_X_COUNT, val) +#define bfin_read_MDMA_S0_X_MODIFY() bfin_read16(MDMA_S0_X_MODIFY) +#define bfin_write_MDMA_S0_X_MODIFY(val) bfin_write16(MDMA_S0_X_MODIFY, val) +#define bfin_read_MDMA_S0_Y_COUNT() bfin_read16(MDMA_S0_Y_COUNT) +#define bfin_write_MDMA_S0_Y_COUNT(val) bfin_write16(MDMA_S0_Y_COUNT, val) +#define bfin_read_MDMA_S0_Y_MODIFY() bfin_read16(MDMA_S0_Y_MODIFY) +#define bfin_write_MDMA_S0_Y_MODIFY(val) bfin_write16(MDMA_S0_Y_MODIFY, val) +#define bfin_read_MDMA_S0_CURR_DESC_PTR() bfin_readPTR(MDMA_S0_CURR_DESC_PTR) +#define bfin_write_MDMA_S0_CURR_DESC_PTR(val) bfin_writePTR(MDMA_S0_CURR_DESC_PTR, val) +#define bfin_read_MDMA_S0_CURR_ADDR() bfin_readPTR(MDMA_S0_CURR_ADDR) +#define bfin_write_MDMA_S0_CURR_ADDR(val) bfin_writePTR(MDMA_S0_CURR_ADDR, val) +#define bfin_read_MDMA_S0_IRQ_STATUS() bfin_read16(MDMA_S0_IRQ_STATUS) +#define bfin_write_MDMA_S0_IRQ_STATUS(val) bfin_write16(MDMA_S0_IRQ_STATUS, val) +#define bfin_read_MDMA_S0_PERIPHERAL_MAP() bfin_read16(MDMA_S0_PERIPHERAL_MAP) +#define bfin_write_MDMA_S0_PERIPHERAL_MAP(val) bfin_write16(MDMA_S0_PERIPHERAL_MAP, val) +#define bfin_read_MDMA_S0_CURR_X_COUNT() bfin_read16(MDMA_S0_CURR_X_COUNT) +#define bfin_write_MDMA_S0_CURR_X_COUNT(val) bfin_write16(MDMA_S0_CURR_X_COUNT, val) +#define bfin_read_MDMA_S0_CURR_Y_COUNT() bfin_read16(MDMA_S0_CURR_Y_COUNT) +#define bfin_write_MDMA_S0_CURR_Y_COUNT(val) bfin_write16(MDMA_S0_CURR_Y_COUNT, val) +#define bfin_read_MDMA_D0_NEXT_DESC_PTR() bfin_readPTR(MDMA_D0_NEXT_DESC_PTR) +#define bfin_write_MDMA_D0_NEXT_DESC_PTR(val) bfin_writePTR(MDMA_D0_NEXT_DESC_PTR, val) +#define bfin_read_MDMA_D0_START_ADDR() bfin_readPTR(MDMA_D0_START_ADDR) +#define bfin_write_MDMA_D0_START_ADDR(val) bfin_writePTR(MDMA_D0_START_ADDR, val) +#define bfin_read_MDMA_D0_CONFIG() bfin_read16(MDMA_D0_CONFIG) +#define bfin_write_MDMA_D0_CONFIG(val) bfin_write16(MDMA_D0_CONFIG, val) +#define bfin_read_MDMA_D0_X_COUNT() bfin_read16(MDMA_D0_X_COUNT) +#define bfin_write_MDMA_D0_X_COUNT(val) bfin_write16(MDMA_D0_X_COUNT, val) +#define bfin_read_MDMA_D0_X_MODIFY() bfin_read16(MDMA_D0_X_MODIFY) +#define bfin_write_MDMA_D0_X_MODIFY(val) bfin_write16(MDMA_D0_X_MODIFY, val) +#define bfin_read_MDMA_D0_Y_COUNT() bfin_read16(MDMA_D0_Y_COUNT) +#define bfin_write_MDMA_D0_Y_COUNT(val) bfin_write16(MDMA_D0_Y_COUNT, val) +#define bfin_read_MDMA_D0_Y_MODIFY() bfin_read16(MDMA_D0_Y_MODIFY) +#define bfin_write_MDMA_D0_Y_MODIFY(val) bfin_write16(MDMA_D0_Y_MODIFY, val) +#define bfin_read_MDMA_D0_CURR_DESC_PTR() bfin_readPTR(MDMA_D0_CURR_DESC_PTR) +#define bfin_write_MDMA_D0_CURR_DESC_PTR(val) bfin_writePTR(MDMA_D0_CURR_DESC_PTR, val) +#define bfin_read_MDMA_D0_CURR_ADDR() bfin_readPTR(MDMA_D0_CURR_ADDR) +#define bfin_write_MDMA_D0_CURR_ADDR(val) bfin_writePTR(MDMA_D0_CURR_ADDR, val) +#define bfin_read_MDMA_D0_IRQ_STATUS() bfin_read16(MDMA_D0_IRQ_STATUS) +#define bfin_write_MDMA_D0_IRQ_STATUS(val) bfin_write16(MDMA_D0_IRQ_STATUS, val) +#define bfin_read_MDMA_D0_PERIPHERAL_MAP() bfin_read16(MDMA_D0_PERIPHERAL_MAP) +#define bfin_write_MDMA_D0_PERIPHERAL_MAP(val) bfin_write16(MDMA_D0_PERIPHERAL_MAP, val) +#define bfin_read_MDMA_D0_CURR_X_COUNT() bfin_read16(MDMA_D0_CURR_X_COUNT) +#define bfin_write_MDMA_D0_CURR_X_COUNT(val) bfin_write16(MDMA_D0_CURR_X_COUNT, val) +#define bfin_read_MDMA_D0_CURR_Y_COUNT() bfin_read16(MDMA_D0_CURR_Y_COUNT) +#define bfin_write_MDMA_D0_CURR_Y_COUNT(val) bfin_write16(MDMA_D0_CURR_Y_COUNT, val) +#define bfin_read_MDMA_S1_NEXT_DESC_PTR() bfin_readPTR(MDMA_S1_NEXT_DESC_PTR) +#define bfin_write_MDMA_S1_NEXT_DESC_PTR(val) bfin_writePTR(MDMA_S1_NEXT_DESC_PTR, val) +#define bfin_read_MDMA_S1_START_ADDR() bfin_readPTR(MDMA_S1_START_ADDR) +#define bfin_write_MDMA_S1_START_ADDR(val) bfin_writePTR(MDMA_S1_START_ADDR, val) +#define bfin_read_MDMA_S1_CONFIG() bfin_read16(MDMA_S1_CONFIG) +#define bfin_write_MDMA_S1_CONFIG(val) bfin_write16(MDMA_S1_CONFIG, val) +#define bfin_read_MDMA_S1_X_COUNT() bfin_read16(MDMA_S1_X_COUNT) +#define bfin_write_MDMA_S1_X_COUNT(val) bfin_write16(MDMA_S1_X_COUNT, val) +#define bfin_read_MDMA_S1_X_MODIFY() bfin_read16(MDMA_S1_X_MODIFY) +#define bfin_write_MDMA_S1_X_MODIFY(val) bfin_write16(MDMA_S1_X_MODIFY, val) +#define bfin_read_MDMA_S1_Y_COUNT() bfin_read16(MDMA_S1_Y_COUNT) +#define bfin_write_MDMA_S1_Y_COUNT(val) bfin_write16(MDMA_S1_Y_COUNT, val) +#define bfin_read_MDMA_S1_Y_MODIFY() bfin_read16(MDMA_S1_Y_MODIFY) +#define bfin_write_MDMA_S1_Y_MODIFY(val) bfin_write16(MDMA_S1_Y_MODIFY, val) +#define bfin_read_MDMA_S1_CURR_DESC_PTR() bfin_readPTR(MDMA_S1_CURR_DESC_PTR) +#define bfin_write_MDMA_S1_CURR_DESC_PTR(val) bfin_writePTR(MDMA_S1_CURR_DESC_PTR, val) +#define bfin_read_MDMA_S1_CURR_ADDR() bfin_readPTR(MDMA_S1_CURR_ADDR) +#define bfin_write_MDMA_S1_CURR_ADDR(val) bfin_writePTR(MDMA_S1_CURR_ADDR, val) +#define bfin_read_MDMA_S1_IRQ_STATUS() bfin_read16(MDMA_S1_IRQ_STATUS) +#define bfin_write_MDMA_S1_IRQ_STATUS(val) bfin_write16(MDMA_S1_IRQ_STATUS, val) +#define bfin_read_MDMA_S1_PERIPHERAL_MAP() bfin_read16(MDMA_S1_PERIPHERAL_MAP) +#define bfin_write_MDMA_S1_PERIPHERAL_MAP(val) bfin_write16(MDMA_S1_PERIPHERAL_MAP, val) +#define bfin_read_MDMA_S1_CURR_X_COUNT() bfin_read16(MDMA_S1_CURR_X_COUNT) +#define bfin_write_MDMA_S1_CURR_X_COUNT(val) bfin_write16(MDMA_S1_CURR_X_COUNT, val) +#define bfin_read_MDMA_S1_CURR_Y_COUNT() bfin_read16(MDMA_S1_CURR_Y_COUNT) +#define bfin_write_MDMA_S1_CURR_Y_COUNT(val) bfin_write16(MDMA_S1_CURR_Y_COUNT, val) +#define bfin_read_MDMA_D1_NEXT_DESC_PTR() bfin_readPTR(MDMA_D1_NEXT_DESC_PTR) +#define bfin_write_MDMA_D1_NEXT_DESC_PTR(val) bfin_writePTR(MDMA_D1_NEXT_DESC_PTR, val) +#define bfin_read_MDMA_D1_START_ADDR() bfin_readPTR(MDMA_D1_START_ADDR) +#define bfin_write_MDMA_D1_START_ADDR(val) bfin_writePTR(MDMA_D1_START_ADDR, val) +#define bfin_read_MDMA_D1_CONFIG() bfin_read16(MDMA_D1_CONFIG) +#define bfin_write_MDMA_D1_CONFIG(val) bfin_write16(MDMA_D1_CONFIG, val) +#define bfin_read_MDMA_D1_X_COUNT() bfin_read16(MDMA_D1_X_COUNT) +#define bfin_write_MDMA_D1_X_COUNT(val) bfin_write16(MDMA_D1_X_COUNT, val) +#define bfin_read_MDMA_D1_X_MODIFY() bfin_read16(MDMA_D1_X_MODIFY) +#define bfin_write_MDMA_D1_X_MODIFY(val) bfin_write16(MDMA_D1_X_MODIFY, val) +#define bfin_read_MDMA_D1_Y_COUNT() bfin_read16(MDMA_D1_Y_COUNT) +#define bfin_write_MDMA_D1_Y_COUNT(val) bfin_write16(MDMA_D1_Y_COUNT, val) +#define bfin_read_MDMA_D1_Y_MODIFY() bfin_read16(MDMA_D1_Y_MODIFY) +#define bfin_write_MDMA_D1_Y_MODIFY(val) bfin_write16(MDMA_D1_Y_MODIFY, val) +#define bfin_read_MDMA_D1_CURR_DESC_PTR() bfin_readPTR(MDMA_D1_CURR_DESC_PTR) +#define bfin_write_MDMA_D1_CURR_DESC_PTR(val) bfin_writePTR(MDMA_D1_CURR_DESC_PTR, val) +#define bfin_read_MDMA_D1_CURR_ADDR() bfin_readPTR(MDMA_D1_CURR_ADDR) +#define bfin_write_MDMA_D1_CURR_ADDR(val) bfin_writePTR(MDMA_D1_CURR_ADDR, val) +#define bfin_read_MDMA_D1_IRQ_STATUS() bfin_read16(MDMA_D1_IRQ_STATUS) +#define bfin_write_MDMA_D1_IRQ_STATUS(val) bfin_write16(MDMA_D1_IRQ_STATUS, val) +#define bfin_read_MDMA_D1_PERIPHERAL_MAP() bfin_read16(MDMA_D1_PERIPHERAL_MAP) +#define bfin_write_MDMA_D1_PERIPHERAL_MAP(val) bfin_write16(MDMA_D1_PERIPHERAL_MAP, val) +#define bfin_read_MDMA_D1_CURR_X_COUNT() bfin_read16(MDMA_D1_CURR_X_COUNT) +#define bfin_write_MDMA_D1_CURR_X_COUNT(val) bfin_write16(MDMA_D1_CURR_X_COUNT, val) +#define bfin_read_MDMA_D1_CURR_Y_COUNT() bfin_read16(MDMA_D1_CURR_Y_COUNT) +#define bfin_write_MDMA_D1_CURR_Y_COUNT(val) bfin_write16(MDMA_D1_CURR_Y_COUNT, val) +#define bfin_read_PPI_CONTROL() bfin_read16(PPI_CONTROL) +#define bfin_write_PPI_CONTROL(val) bfin_write16(PPI_CONTROL, val) +#define bfin_read_PPI_STATUS() bfin_read16(PPI_STATUS) +#define bfin_write_PPI_STATUS(val) bfin_write16(PPI_STATUS, val) +#define bfin_read_PPI_COUNT() bfin_read16(PPI_COUNT) +#define bfin_write_PPI_COUNT(val) bfin_write16(PPI_COUNT, val) +#define bfin_read_PPI_DELAY() bfin_read16(PPI_DELAY) +#define bfin_write_PPI_DELAY(val) bfin_write16(PPI_DELAY, val) +#define bfin_read_PPI_FRAME() bfin_read16(PPI_FRAME) +#define bfin_write_PPI_FRAME(val) bfin_write16(PPI_FRAME, val) +#define bfin_read_TWI_CLKDIV() bfin_read16(TWI_CLKDIV) +#define bfin_write_TWI_CLKDIV(val) bfin_write16(TWI_CLKDIV, val) +#define bfin_read_TWI_CONTROL() bfin_read16(TWI_CONTROL) +#define bfin_write_TWI_CONTROL(val) bfin_write16(TWI_CONTROL, val) +#define bfin_read_TWI_SLAVE_CTL() bfin_read16(TWI_SLAVE_CTL) +#define bfin_write_TWI_SLAVE_CTL(val) bfin_write16(TWI_SLAVE_CTL, val) +#define bfin_read_TWI_SLAVE_STAT() bfin_read16(TWI_SLAVE_STAT) +#define bfin_write_TWI_SLAVE_STAT(val) bfin_write16(TWI_SLAVE_STAT, val) +#define bfin_read_TWI_SLAVE_ADDR() bfin_read16(TWI_SLAVE_ADDR) +#define bfin_write_TWI_SLAVE_ADDR(val) bfin_write16(TWI_SLAVE_ADDR, val) +#define bfin_read_TWI_MASTER_CTL() bfin_read16(TWI_MASTER_CTL) +#define bfin_write_TWI_MASTER_CTL(val) bfin_write16(TWI_MASTER_CTL, val) +#define bfin_read_TWI_MASTER_STAT() bfin_read16(TWI_MASTER_STAT) +#define bfin_write_TWI_MASTER_STAT(val) bfin_write16(TWI_MASTER_STAT, val) +#define bfin_read_TWI_MASTER_ADDR() bfin_read16(TWI_MASTER_ADDR) +#define bfin_write_TWI_MASTER_ADDR(val) bfin_write16(TWI_MASTER_ADDR, val) +#define bfin_read_TWI_INT_STAT() bfin_read16(TWI_INT_STAT) +#define bfin_write_TWI_INT_STAT(val) bfin_write16(TWI_INT_STAT, val) +#define bfin_read_TWI_INT_MASK() bfin_read16(TWI_INT_MASK) +#define bfin_write_TWI_INT_MASK(val) bfin_write16(TWI_INT_MASK, val) +#define bfin_read_TWI_FIFO_CTL() bfin_read16(TWI_FIFO_CTL) +#define bfin_write_TWI_FIFO_CTL(val) bfin_write16(TWI_FIFO_CTL, val) +#define bfin_read_TWI_FIFO_STAT() bfin_read16(TWI_FIFO_STAT) +#define bfin_write_TWI_FIFO_STAT(val) bfin_write16(TWI_FIFO_STAT, val) +#define bfin_read_TWI_XMT_DATA8() bfin_read16(TWI_XMT_DATA8) +#define bfin_write_TWI_XMT_DATA8(val) bfin_write16(TWI_XMT_DATA8, val) +#define bfin_read_TWI_XMT_DATA16() bfin_read16(TWI_XMT_DATA16) +#define bfin_write_TWI_XMT_DATA16(val) bfin_write16(TWI_XMT_DATA16, val) +#define bfin_read_TWI_RCV_DATA8() bfin_read16(TWI_RCV_DATA8) +#define bfin_write_TWI_RCV_DATA8(val) bfin_write16(TWI_RCV_DATA8, val) +#define bfin_read_TWI_RCV_DATA16() bfin_read16(TWI_RCV_DATA16) +#define bfin_write_TWI_RCV_DATA16(val) bfin_write16(TWI_RCV_DATA16, val) +#define bfin_read_PORTGIO() bfin_read16(PORTGIO) +#define bfin_write_PORTGIO(val) bfin_write16(PORTGIO, val) +#define bfin_read_PORTGIO_CLEAR() bfin_read16(PORTGIO_CLEAR) +#define bfin_write_PORTGIO_CLEAR(val) bfin_write16(PORTGIO_CLEAR, val) +#define bfin_read_PORTGIO_SET() bfin_read16(PORTGIO_SET) +#define bfin_write_PORTGIO_SET(val) bfin_write16(PORTGIO_SET, val) +#define bfin_read_PORTGIO_TOGGLE() bfin_read16(PORTGIO_TOGGLE) +#define bfin_write_PORTGIO_TOGGLE(val) bfin_write16(PORTGIO_TOGGLE, val) +#define bfin_read_PORTGIO_MASKA() bfin_read16(PORTGIO_MASKA) +#define bfin_write_PORTGIO_MASKA(val) bfin_write16(PORTGIO_MASKA, val) +#define bfin_read_PORTGIO_MASKA_CLEAR() bfin_read16(PORTGIO_MASKA_CLEAR) +#define bfin_write_PORTGIO_MASKA_CLEAR(val) bfin_write16(PORTGIO_MASKA_CLEAR, val) +#define bfin_read_PORTGIO_MASKA_SET() bfin_read16(PORTGIO_MASKA_SET) +#define bfin_write_PORTGIO_MASKA_SET(val) bfin_write16(PORTGIO_MASKA_SET, val) +#define bfin_read_PORTGIO_MASKA_TOGGLE() bfin_read16(PORTGIO_MASKA_TOGGLE) +#define bfin_write_PORTGIO_MASKA_TOGGLE(val) bfin_write16(PORTGIO_MASKA_TOGGLE, val) +#define bfin_read_PORTGIO_MASKB() bfin_read16(PORTGIO_MASKB) +#define bfin_write_PORTGIO_MASKB(val) bfin_write16(PORTGIO_MASKB, val) +#define bfin_read_PORTGIO_MASKB_CLEAR() bfin_read16(PORTGIO_MASKB_CLEAR) +#define bfin_write_PORTGIO_MASKB_CLEAR(val) bfin_write16(PORTGIO_MASKB_CLEAR, val) +#define bfin_read_PORTGIO_MASKB_SET() bfin_read16(PORTGIO_MASKB_SET) +#define bfin_write_PORTGIO_MASKB_SET(val) bfin_write16(PORTGIO_MASKB_SET, val) +#define bfin_read_PORTGIO_MASKB_TOGGLE() bfin_read16(PORTGIO_MASKB_TOGGLE) +#define bfin_write_PORTGIO_MASKB_TOGGLE(val) bfin_write16(PORTGIO_MASKB_TOGGLE, val) +#define bfin_read_PORTGIO_DIR() bfin_read16(PORTGIO_DIR) +#define bfin_write_PORTGIO_DIR(val) bfin_write16(PORTGIO_DIR, val) +#define bfin_read_PORTGIO_POLAR() bfin_read16(PORTGIO_POLAR) +#define bfin_write_PORTGIO_POLAR(val) bfin_write16(PORTGIO_POLAR, val) +#define bfin_read_PORTGIO_EDGE() bfin_read16(PORTGIO_EDGE) +#define bfin_write_PORTGIO_EDGE(val) bfin_write16(PORTGIO_EDGE, val) +#define bfin_read_PORTGIO_BOTH() bfin_read16(PORTGIO_BOTH) +#define bfin_write_PORTGIO_BOTH(val) bfin_write16(PORTGIO_BOTH, val) +#define bfin_read_PORTGIO_INEN() bfin_read16(PORTGIO_INEN) +#define bfin_write_PORTGIO_INEN(val) bfin_write16(PORTGIO_INEN, val) +#define bfin_read_PORTHIO() bfin_read16(PORTHIO) +#define bfin_write_PORTHIO(val) bfin_write16(PORTHIO, val) +#define bfin_read_PORTHIO_CLEAR() bfin_read16(PORTHIO_CLEAR) +#define bfin_write_PORTHIO_CLEAR(val) bfin_write16(PORTHIO_CLEAR, val) +#define bfin_read_PORTHIO_SET() bfin_read16(PORTHIO_SET) +#define bfin_write_PORTHIO_SET(val) bfin_write16(PORTHIO_SET, val) +#define bfin_read_PORTHIO_TOGGLE() bfin_read16(PORTHIO_TOGGLE) +#define bfin_write_PORTHIO_TOGGLE(val) bfin_write16(PORTHIO_TOGGLE, val) +#define bfin_read_PORTHIO_MASKA() bfin_read16(PORTHIO_MASKA) +#define bfin_write_PORTHIO_MASKA(val) bfin_write16(PORTHIO_MASKA, val) +#define bfin_read_PORTHIO_MASKA_CLEAR() bfin_read16(PORTHIO_MASKA_CLEAR) +#define bfin_write_PORTHIO_MASKA_CLEAR(val) bfin_write16(PORTHIO_MASKA_CLEAR, val) +#define bfin_read_PORTHIO_MASKA_SET() bfin_read16(PORTHIO_MASKA_SET) +#define bfin_write_PORTHIO_MASKA_SET(val) bfin_write16(PORTHIO_MASKA_SET, val) +#define bfin_read_PORTHIO_MASKA_TOGGLE() bfin_read16(PORTHIO_MASKA_TOGGLE) +#define bfin_write_PORTHIO_MASKA_TOGGLE(val) bfin_write16(PORTHIO_MASKA_TOGGLE, val) +#define bfin_read_PORTHIO_MASKB() bfin_read16(PORTHIO_MASKB) +#define bfin_write_PORTHIO_MASKB(val) bfin_write16(PORTHIO_MASKB, val) +#define bfin_read_PORTHIO_MASKB_CLEAR() bfin_read16(PORTHIO_MASKB_CLEAR) +#define bfin_write_PORTHIO_MASKB_CLEAR(val) bfin_write16(PORTHIO_MASKB_CLEAR, val) +#define bfin_read_PORTHIO_MASKB_SET() bfin_read16(PORTHIO_MASKB_SET) +#define bfin_write_PORTHIO_MASKB_SET(val) bfin_write16(PORTHIO_MASKB_SET, val) +#define bfin_read_PORTHIO_MASKB_TOGGLE() bfin_read16(PORTHIO_MASKB_TOGGLE) +#define bfin_write_PORTHIO_MASKB_TOGGLE(val) bfin_write16(PORTHIO_MASKB_TOGGLE, val) +#define bfin_read_PORTHIO_DIR() bfin_read16(PORTHIO_DIR) +#define bfin_write_PORTHIO_DIR(val) bfin_write16(PORTHIO_DIR, val) +#define bfin_read_PORTHIO_POLAR() bfin_read16(PORTHIO_POLAR) +#define bfin_write_PORTHIO_POLAR(val) bfin_write16(PORTHIO_POLAR, val) +#define bfin_read_PORTHIO_EDGE() bfin_read16(PORTHIO_EDGE) +#define bfin_write_PORTHIO_EDGE(val) bfin_write16(PORTHIO_EDGE, val) +#define bfin_read_PORTHIO_BOTH() bfin_read16(PORTHIO_BOTH) +#define bfin_write_PORTHIO_BOTH(val) bfin_write16(PORTHIO_BOTH, val) +#define bfin_read_PORTHIO_INEN() bfin_read16(PORTHIO_INEN) +#define bfin_write_PORTHIO_INEN(val) bfin_write16(PORTHIO_INEN, val) +#define bfin_read_UART1_DLL() bfin_read16(UART1_DLL) +#define bfin_write_UART1_DLL(val) bfin_write16(UART1_DLL, val) +#define bfin_read_UART1_DLH() bfin_read16(UART1_DLH) +#define bfin_write_UART1_DLH(val) bfin_write16(UART1_DLH, val) +#define bfin_read_UART1_GCTL() bfin_read16(UART1_GCTL) +#define bfin_write_UART1_GCTL(val) bfin_write16(UART1_GCTL, val) +#define bfin_read_UART1_LCR() bfin_read16(UART1_LCR) +#define bfin_write_UART1_LCR(val) bfin_write16(UART1_LCR, val) +#define bfin_read_UART1_MCR() bfin_read16(UART1_MCR) +#define bfin_write_UART1_MCR(val) bfin_write16(UART1_MCR, val) +#define bfin_read_UART1_LSR() bfin_read16(UART1_LSR) +#define bfin_write_UART1_LSR(val) bfin_write16(UART1_LSR, val) +#define bfin_read_UART1_MSR() bfin_read16(UART1_MSR) +#define bfin_write_UART1_MSR(val) bfin_write16(UART1_MSR, val) +#define bfin_read_UART1_SCR() bfin_read16(UART1_SCR) +#define bfin_write_UART1_SCR(val) bfin_write16(UART1_SCR, val) +#define bfin_read_UART1_IER_SET() bfin_read16(UART1_IER_SET) +#define bfin_write_UART1_IER_SET(val) bfin_write16(UART1_IER_SET, val) +#define bfin_read_UART1_IER_CLEAR() bfin_read16(UART1_IER_CLEAR) +#define bfin_write_UART1_IER_CLEAR(val) bfin_write16(UART1_IER_CLEAR, val) +#define bfin_read_UART1_THR() bfin_read16(UART1_THR) +#define bfin_write_UART1_THR(val) bfin_write16(UART1_THR, val) +#define bfin_read_UART1_RBR() bfin_read16(UART1_RBR) +#define bfin_write_UART1_RBR(val) bfin_write16(UART1_RBR, val) +#define bfin_read_CAN_MC1() bfin_read16(CAN_MC1) +#define bfin_write_CAN_MC1(val) bfin_write16(CAN_MC1, val) +#define bfin_read_CAN_MD1() bfin_read16(CAN_MD1) +#define bfin_write_CAN_MD1(val) bfin_write16(CAN_MD1, val) +#define bfin_read_CAN_TRS1() bfin_read16(CAN_TRS1) +#define bfin_write_CAN_TRS1(val) bfin_write16(CAN_TRS1, val) +#define bfin_read_CAN_TRR1() bfin_read16(CAN_TRR1) +#define bfin_write_CAN_TRR1(val) bfin_write16(CAN_TRR1, val) +#define bfin_read_CAN_TA1() bfin_read16(CAN_TA1) +#define bfin_write_CAN_TA1(val) bfin_write16(CAN_TA1, val) +#define bfin_read_CAN_AA1() bfin_read16(CAN_AA1) +#define bfin_write_CAN_AA1(val) bfin_write16(CAN_AA1, val) +#define bfin_read_CAN_RMP1() bfin_read16(CAN_RMP1) +#define bfin_write_CAN_RMP1(val) bfin_write16(CAN_RMP1, val) +#define bfin_read_CAN_RML1() bfin_read16(CAN_RML1) +#define bfin_write_CAN_RML1(val) bfin_write16(CAN_RML1, val) +#define bfin_read_CAN_MBTIF1() bfin_read16(CAN_MBTIF1) +#define bfin_write_CAN_MBTIF1(val) bfin_write16(CAN_MBTIF1, val) +#define bfin_read_CAN_MBRIF1() bfin_read16(CAN_MBRIF1) +#define bfin_write_CAN_MBRIF1(val) bfin_write16(CAN_MBRIF1, val) +#define bfin_read_CAN_MBIM1() bfin_read16(CAN_MBIM1) +#define bfin_write_CAN_MBIM1(val) bfin_write16(CAN_MBIM1, val) +#define bfin_read_CAN_RFH1() bfin_read16(CAN_RFH1) +#define bfin_write_CAN_RFH1(val) bfin_write16(CAN_RFH1, val) +#define bfin_read_CAN_OPSS1() bfin_read16(CAN_OPSS1) +#define bfin_write_CAN_OPSS1(val) bfin_write16(CAN_OPSS1, val) +#define bfin_read_CAN_MC2() bfin_read16(CAN_MC2) +#define bfin_write_CAN_MC2(val) bfin_write16(CAN_MC2, val) +#define bfin_read_CAN_MD2() bfin_read16(CAN_MD2) +#define bfin_write_CAN_MD2(val) bfin_write16(CAN_MD2, val) +#define bfin_read_CAN_TRS2() bfin_read16(CAN_TRS2) +#define bfin_write_CAN_TRS2(val) bfin_write16(CAN_TRS2, val) +#define bfin_read_CAN_TRR2() bfin_read16(CAN_TRR2) +#define bfin_write_CAN_TRR2(val) bfin_write16(CAN_TRR2, val) +#define bfin_read_CAN_TA2() bfin_read16(CAN_TA2) +#define bfin_write_CAN_TA2(val) bfin_write16(CAN_TA2, val) +#define bfin_read_CAN_AA2() bfin_read16(CAN_AA2) +#define bfin_write_CAN_AA2(val) bfin_write16(CAN_AA2, val) +#define bfin_read_CAN_RMP2() bfin_read16(CAN_RMP2) +#define bfin_write_CAN_RMP2(val) bfin_write16(CAN_RMP2, val) +#define bfin_read_CAN_RML2() bfin_read16(CAN_RML2) +#define bfin_write_CAN_RML2(val) bfin_write16(CAN_RML2, val) +#define bfin_read_CAN_MBTIF2() bfin_read16(CAN_MBTIF2) +#define bfin_write_CAN_MBTIF2(val) bfin_write16(CAN_MBTIF2, val) +#define bfin_read_CAN_MBRIF2() bfin_read16(CAN_MBRIF2) +#define bfin_write_CAN_MBRIF2(val) bfin_write16(CAN_MBRIF2, val) +#define bfin_read_CAN_MBIM2() bfin_read16(CAN_MBIM2) +#define bfin_write_CAN_MBIM2(val) bfin_write16(CAN_MBIM2, val) +#define bfin_read_CAN_RFH2() bfin_read16(CAN_RFH2) +#define bfin_write_CAN_RFH2(val) bfin_write16(CAN_RFH2, val) +#define bfin_read_CAN_OPSS2() bfin_read16(CAN_OPSS2) +#define bfin_write_CAN_OPSS2(val) bfin_write16(CAN_OPSS2, val) +#define bfin_read_CAN_CLOCK() bfin_read16(CAN_CLOCK) +#define bfin_write_CAN_CLOCK(val) bfin_write16(CAN_CLOCK, val) +#define bfin_read_CAN_TIMING() bfin_read16(CAN_TIMING) +#define bfin_write_CAN_TIMING(val) bfin_write16(CAN_TIMING, val) +#define bfin_read_CAN_DEBUG() bfin_read16(CAN_DEBUG) +#define bfin_write_CAN_DEBUG(val) bfin_write16(CAN_DEBUG, val) +#define bfin_read_CAN_STATUS() bfin_read16(CAN_STATUS) +#define bfin_write_CAN_STATUS(val) bfin_write16(CAN_STATUS, val) +#define bfin_read_CAN_CEC() bfin_read16(CAN_CEC) +#define bfin_write_CAN_CEC(val) bfin_write16(CAN_CEC, val) +#define bfin_read_CAN_GIS() bfin_read16(CAN_GIS) +#define bfin_write_CAN_GIS(val) bfin_write16(CAN_GIS, val) +#define bfin_read_CAN_GIM() bfin_read16(CAN_GIM) +#define bfin_write_CAN_GIM(val) bfin_write16(CAN_GIM, val) +#define bfin_read_CAN_GIF() bfin_read16(CAN_GIF) +#define bfin_write_CAN_GIF(val) bfin_write16(CAN_GIF, val) +#define bfin_read_CAN_CONTROL() bfin_read16(CAN_CONTROL) +#define bfin_write_CAN_CONTROL(val) bfin_write16(CAN_CONTROL, val) +#define bfin_read_CAN_INTR() bfin_read16(CAN_INTR) +#define bfin_write_CAN_INTR(val) bfin_write16(CAN_INTR, val) +#define bfin_read_CAN_VERSION() bfin_read16(CAN_VERSION) +#define bfin_write_CAN_VERSION(val) bfin_write16(CAN_VERSION, val) +#define bfin_read_CAN_MBTD() bfin_read16(CAN_MBTD) +#define bfin_write_CAN_MBTD(val) bfin_write16(CAN_MBTD, val) +#define bfin_read_CAN_EWR() bfin_read16(CAN_EWR) +#define bfin_write_CAN_EWR(val) bfin_write16(CAN_EWR, val) +#define bfin_read_CAN_ESR() bfin_read16(CAN_ESR) +#define bfin_write_CAN_ESR(val) bfin_write16(CAN_ESR, val) +#define bfin_read_CAN_UCREG() bfin_read16(CAN_UCREG) +#define bfin_write_CAN_UCREG(val) bfin_write16(CAN_UCREG, val) +#define bfin_read_CAN_UCCNT() bfin_read16(CAN_UCCNT) +#define bfin_write_CAN_UCCNT(val) bfin_write16(CAN_UCCNT, val) +#define bfin_read_CAN_UCRC() bfin_read16(CAN_UCRC) +#define bfin_write_CAN_UCRC(val) bfin_write16(CAN_UCRC, val) +#define bfin_read_CAN_UCCNF() bfin_read16(CAN_UCCNF) +#define bfin_write_CAN_UCCNF(val) bfin_write16(CAN_UCCNF, val) +#define bfin_read_CAN_VERSION2() bfin_read16(CAN_VERSION2) +#define bfin_write_CAN_VERSION2(val) bfin_write16(CAN_VERSION2, val) +#define bfin_read_CAN_AM00L() bfin_read16(CAN_AM00L) +#define bfin_write_CAN_AM00L(val) bfin_write16(CAN_AM00L, val) +#define bfin_read_CAN_AM00H() bfin_read16(CAN_AM00H) +#define bfin_write_CAN_AM00H(val) bfin_write16(CAN_AM00H, val) +#define bfin_read_CAN_AM01L() bfin_read16(CAN_AM01L) +#define bfin_write_CAN_AM01L(val) bfin_write16(CAN_AM01L, val) +#define bfin_read_CAN_AM01H() bfin_read16(CAN_AM01H) +#define bfin_write_CAN_AM01H(val) bfin_write16(CAN_AM01H, val) +#define bfin_read_CAN_AM02L() bfin_read16(CAN_AM02L) +#define bfin_write_CAN_AM02L(val) bfin_write16(CAN_AM02L, val) +#define bfin_read_CAN_AM02H() bfin_read16(CAN_AM02H) +#define bfin_write_CAN_AM02H(val) bfin_write16(CAN_AM02H, val) +#define bfin_read_CAN_AM03L() bfin_read16(CAN_AM03L) +#define bfin_write_CAN_AM03L(val) bfin_write16(CAN_AM03L, val) +#define bfin_read_CAN_AM03H() bfin_read16(CAN_AM03H) +#define bfin_write_CAN_AM03H(val) bfin_write16(CAN_AM03H, val) +#define bfin_read_CAN_AM04L() bfin_read16(CAN_AM04L) +#define bfin_write_CAN_AM04L(val) bfin_write16(CAN_AM04L, val) +#define bfin_read_CAN_AM04H() bfin_read16(CAN_AM04H) +#define bfin_write_CAN_AM04H(val) bfin_write16(CAN_AM04H, val) +#define bfin_read_CAN_AM05L() bfin_read16(CAN_AM05L) +#define bfin_write_CAN_AM05L(val) bfin_write16(CAN_AM05L, val) +#define bfin_read_CAN_AM05H() bfin_read16(CAN_AM05H) +#define bfin_write_CAN_AM05H(val) bfin_write16(CAN_AM05H, val) +#define bfin_read_CAN_AM06L() bfin_read16(CAN_AM06L) +#define bfin_write_CAN_AM06L(val) bfin_write16(CAN_AM06L, val) +#define bfin_read_CAN_AM06H() bfin_read16(CAN_AM06H) +#define bfin_write_CAN_AM06H(val) bfin_write16(CAN_AM06H, val) +#define bfin_read_CAN_AM07L() bfin_read16(CAN_AM07L) +#define bfin_write_CAN_AM07L(val) bfin_write16(CAN_AM07L, val) +#define bfin_read_CAN_AM07H() bfin_read16(CAN_AM07H) +#define bfin_write_CAN_AM07H(val) bfin_write16(CAN_AM07H, val) +#define bfin_read_CAN_AM08L() bfin_read16(CAN_AM08L) +#define bfin_write_CAN_AM08L(val) bfin_write16(CAN_AM08L, val) +#define bfin_read_CAN_AM08H() bfin_read16(CAN_AM08H) +#define bfin_write_CAN_AM08H(val) bfin_write16(CAN_AM08H, val) +#define bfin_read_CAN_AM09L() bfin_read16(CAN_AM09L) +#define bfin_write_CAN_AM09L(val) bfin_write16(CAN_AM09L, val) +#define bfin_read_CAN_AM09H() bfin_read16(CAN_AM09H) +#define bfin_write_CAN_AM09H(val) bfin_write16(CAN_AM09H, val) +#define bfin_read_CAN_AM10L() bfin_read16(CAN_AM10L) +#define bfin_write_CAN_AM10L(val) bfin_write16(CAN_AM10L, val) +#define bfin_read_CAN_AM10H() bfin_read16(CAN_AM10H) +#define bfin_write_CAN_AM10H(val) bfin_write16(CAN_AM10H, val) +#define bfin_read_CAN_AM11L() bfin_read16(CAN_AM11L) +#define bfin_write_CAN_AM11L(val) bfin_write16(CAN_AM11L, val) +#define bfin_read_CAN_AM11H() bfin_read16(CAN_AM11H) +#define bfin_write_CAN_AM11H(val) bfin_write16(CAN_AM11H, val) +#define bfin_read_CAN_AM12L() bfin_read16(CAN_AM12L) +#define bfin_write_CAN_AM12L(val) bfin_write16(CAN_AM12L, val) +#define bfin_read_CAN_AM12H() bfin_read16(CAN_AM12H) +#define bfin_write_CAN_AM12H(val) bfin_write16(CAN_AM12H, val) +#define bfin_read_CAN_AM13L() bfin_read16(CAN_AM13L) +#define bfin_write_CAN_AM13L(val) bfin_write16(CAN_AM13L, val) +#define bfin_read_CAN_AM13H() bfin_read16(CAN_AM13H) +#define bfin_write_CAN_AM13H(val) bfin_write16(CAN_AM13H, val) +#define bfin_read_CAN_AM14L() bfin_read16(CAN_AM14L) +#define bfin_write_CAN_AM14L(val) bfin_write16(CAN_AM14L, val) +#define bfin_read_CAN_AM14H() bfin_read16(CAN_AM14H) +#define bfin_write_CAN_AM14H(val) bfin_write16(CAN_AM14H, val) +#define bfin_read_CAN_AM15L() bfin_read16(CAN_AM15L) +#define bfin_write_CAN_AM15L(val) bfin_write16(CAN_AM15L, val) +#define bfin_read_CAN_AM15H() bfin_read16(CAN_AM15H) +#define bfin_write_CAN_AM15H(val) bfin_write16(CAN_AM15H, val) +#define bfin_read_CAN_AM16L() bfin_read16(CAN_AM16L) +#define bfin_write_CAN_AM16L(val) bfin_write16(CAN_AM16L, val) +#define bfin_read_CAN_AM16H() bfin_read16(CAN_AM16H) +#define bfin_write_CAN_AM16H(val) bfin_write16(CAN_AM16H, val) +#define bfin_read_CAN_AM17L() bfin_read16(CAN_AM17L) +#define bfin_write_CAN_AM17L(val) bfin_write16(CAN_AM17L, val) +#define bfin_read_CAN_AM17H() bfin_read16(CAN_AM17H) +#define bfin_write_CAN_AM17H(val) bfin_write16(CAN_AM17H, val) +#define bfin_read_CAN_AM18L() bfin_read16(CAN_AM18L) +#define bfin_write_CAN_AM18L(val) bfin_write16(CAN_AM18L, val) +#define bfin_read_CAN_AM18H() bfin_read16(CAN_AM18H) +#define bfin_write_CAN_AM18H(val) bfin_write16(CAN_AM18H, val) +#define bfin_read_CAN_AM19L() bfin_read16(CAN_AM19L) +#define bfin_write_CAN_AM19L(val) bfin_write16(CAN_AM19L, val) +#define bfin_read_CAN_AM19H() bfin_read16(CAN_AM19H) +#define bfin_write_CAN_AM19H(val) bfin_write16(CAN_AM19H, val) +#define bfin_read_CAN_AM20L() bfin_read16(CAN_AM20L) +#define bfin_write_CAN_AM20L(val) bfin_write16(CAN_AM20L, val) +#define bfin_read_CAN_AM20H() bfin_read16(CAN_AM20H) +#define bfin_write_CAN_AM20H(val) bfin_write16(CAN_AM20H, val) +#define bfin_read_CAN_AM21L() bfin_read16(CAN_AM21L) +#define bfin_write_CAN_AM21L(val) bfin_write16(CAN_AM21L, val) +#define bfin_read_CAN_AM21H() bfin_read16(CAN_AM21H) +#define bfin_write_CAN_AM21H(val) bfin_write16(CAN_AM21H, val) +#define bfin_read_CAN_AM22L() bfin_read16(CAN_AM22L) +#define bfin_write_CAN_AM22L(val) bfin_write16(CAN_AM22L, val) +#define bfin_read_CAN_AM22H() bfin_read16(CAN_AM22H) +#define bfin_write_CAN_AM22H(val) bfin_write16(CAN_AM22H, val) +#define bfin_read_CAN_AM23L() bfin_read16(CAN_AM23L) +#define bfin_write_CAN_AM23L(val) bfin_write16(CAN_AM23L, val) +#define bfin_read_CAN_AM23H() bfin_read16(CAN_AM23H) +#define bfin_write_CAN_AM23H(val) bfin_write16(CAN_AM23H, val) +#define bfin_read_CAN_AM24L() bfin_read16(CAN_AM24L) +#define bfin_write_CAN_AM24L(val) bfin_write16(CAN_AM24L, val) +#define bfin_read_CAN_AM24H() bfin_read16(CAN_AM24H) +#define bfin_write_CAN_AM24H(val) bfin_write16(CAN_AM24H, val) +#define bfin_read_CAN_AM25L() bfin_read16(CAN_AM25L) +#define bfin_write_CAN_AM25L(val) bfin_write16(CAN_AM25L, val) +#define bfin_read_CAN_AM25H() bfin_read16(CAN_AM25H) +#define bfin_write_CAN_AM25H(val) bfin_write16(CAN_AM25H, val) +#define bfin_read_CAN_AM26L() bfin_read16(CAN_AM26L) +#define bfin_write_CAN_AM26L(val) bfin_write16(CAN_AM26L, val) +#define bfin_read_CAN_AM26H() bfin_read16(CAN_AM26H) +#define bfin_write_CAN_AM26H(val) bfin_write16(CAN_AM26H, val) +#define bfin_read_CAN_AM27L() bfin_read16(CAN_AM27L) +#define bfin_write_CAN_AM27L(val) bfin_write16(CAN_AM27L, val) +#define bfin_read_CAN_AM27H() bfin_read16(CAN_AM27H) +#define bfin_write_CAN_AM27H(val) bfin_write16(CAN_AM27H, val) +#define bfin_read_CAN_AM28L() bfin_read16(CAN_AM28L) +#define bfin_write_CAN_AM28L(val) bfin_write16(CAN_AM28L, val) +#define bfin_read_CAN_AM28H() bfin_read16(CAN_AM28H) +#define bfin_write_CAN_AM28H(val) bfin_write16(CAN_AM28H, val) +#define bfin_read_CAN_AM29L() bfin_read16(CAN_AM29L) +#define bfin_write_CAN_AM29L(val) bfin_write16(CAN_AM29L, val) +#define bfin_read_CAN_AM29H() bfin_read16(CAN_AM29H) +#define bfin_write_CAN_AM29H(val) bfin_write16(CAN_AM29H, val) +#define bfin_read_CAN_AM30L() bfin_read16(CAN_AM30L) +#define bfin_write_CAN_AM30L(val) bfin_write16(CAN_AM30L, val) +#define bfin_read_CAN_AM30H() bfin_read16(CAN_AM30H) +#define bfin_write_CAN_AM30H(val) bfin_write16(CAN_AM30H, val) +#define bfin_read_CAN_AM31L() bfin_read16(CAN_AM31L) +#define bfin_write_CAN_AM31L(val) bfin_write16(CAN_AM31L, val) +#define bfin_read_CAN_AM31H() bfin_read16(CAN_AM31H) +#define bfin_write_CAN_AM31H(val) bfin_write16(CAN_AM31H, val) +#define bfin_read_CAN_MB00_DATA0() bfin_read16(CAN_MB00_DATA0) +#define bfin_write_CAN_MB00_DATA0(val) bfin_write16(CAN_MB00_DATA0, val) +#define bfin_read_CAN_MB00_DATA1() bfin_read16(CAN_MB00_DATA1) +#define bfin_write_CAN_MB00_DATA1(val) bfin_write16(CAN_MB00_DATA1, val) +#define bfin_read_CAN_MB00_DATA2() bfin_read16(CAN_MB00_DATA2) +#define bfin_write_CAN_MB00_DATA2(val) bfin_write16(CAN_MB00_DATA2, val) +#define bfin_read_CAN_MB00_DATA3() bfin_read16(CAN_MB00_DATA3) +#define bfin_write_CAN_MB00_DATA3(val) bfin_write16(CAN_MB00_DATA3, val) +#define bfin_read_CAN_MB00_LENGTH() bfin_read16(CAN_MB00_LENGTH) +#define bfin_write_CAN_MB00_LENGTH(val) bfin_write16(CAN_MB00_LENGTH, val) +#define bfin_read_CAN_MB00_TIMESTAMP() bfin_read16(CAN_MB00_TIMESTAMP) +#define bfin_write_CAN_MB00_TIMESTAMP(val) bfin_write16(CAN_MB00_TIMESTAMP, val) +#define bfin_read_CAN_MB00_ID0() bfin_read16(CAN_MB00_ID0) +#define bfin_write_CAN_MB00_ID0(val) bfin_write16(CAN_MB00_ID0, val) +#define bfin_read_CAN_MB00_ID1() bfin_read16(CAN_MB00_ID1) +#define bfin_write_CAN_MB00_ID1(val) bfin_write16(CAN_MB00_ID1, val) +#define bfin_read_CAN_MB01_DATA0() bfin_read16(CAN_MB01_DATA0) +#define bfin_write_CAN_MB01_DATA0(val) bfin_write16(CAN_MB01_DATA0, val) +#define bfin_read_CAN_MB01_DATA1() bfin_read16(CAN_MB01_DATA1) +#define bfin_write_CAN_MB01_DATA1(val) bfin_write16(CAN_MB01_DATA1, val) +#define bfin_read_CAN_MB01_DATA2() bfin_read16(CAN_MB01_DATA2) +#define bfin_write_CAN_MB01_DATA2(val) bfin_write16(CAN_MB01_DATA2, val) +#define bfin_read_CAN_MB01_DATA3() bfin_read16(CAN_MB01_DATA3) +#define bfin_write_CAN_MB01_DATA3(val) bfin_write16(CAN_MB01_DATA3, val) +#define bfin_read_CAN_MB01_LENGTH() bfin_read16(CAN_MB01_LENGTH) +#define bfin_write_CAN_MB01_LENGTH(val) bfin_write16(CAN_MB01_LENGTH, val) +#define bfin_read_CAN_MB01_TIMESTAMP() bfin_read16(CAN_MB01_TIMESTAMP) +#define bfin_write_CAN_MB01_TIMESTAMP(val) bfin_write16(CAN_MB01_TIMESTAMP, val) +#define bfin_read_CAN_MB01_ID0() bfin_read16(CAN_MB01_ID0) +#define bfin_write_CAN_MB01_ID0(val) bfin_write16(CAN_MB01_ID0, val) +#define bfin_read_CAN_MB01_ID1() bfin_read16(CAN_MB01_ID1) +#define bfin_write_CAN_MB01_ID1(val) bfin_write16(CAN_MB01_ID1, val) +#define bfin_read_CAN_MB02_DATA0() bfin_read16(CAN_MB02_DATA0) +#define bfin_write_CAN_MB02_DATA0(val) bfin_write16(CAN_MB02_DATA0, val) +#define bfin_read_CAN_MB02_DATA1() bfin_read16(CAN_MB02_DATA1) +#define bfin_write_CAN_MB02_DATA1(val) bfin_write16(CAN_MB02_DATA1, val) +#define bfin_read_CAN_MB02_DATA2() bfin_read16(CAN_MB02_DATA2) +#define bfin_write_CAN_MB02_DATA2(val) bfin_write16(CAN_MB02_DATA2, val) +#define bfin_read_CAN_MB02_DATA3() bfin_read16(CAN_MB02_DATA3) +#define bfin_write_CAN_MB02_DATA3(val) bfin_write16(CAN_MB02_DATA3, val) +#define bfin_read_CAN_MB02_LENGTH() bfin_read16(CAN_MB02_LENGTH) +#define bfin_write_CAN_MB02_LENGTH(val) bfin_write16(CAN_MB02_LENGTH, val) +#define bfin_read_CAN_MB02_TIMESTAMP() bfin_read16(CAN_MB02_TIMESTAMP) +#define bfin_write_CAN_MB02_TIMESTAMP(val) bfin_write16(CAN_MB02_TIMESTAMP, val) +#define bfin_read_CAN_MB02_ID0() bfin_read16(CAN_MB02_ID0) +#define bfin_write_CAN_MB02_ID0(val) bfin_write16(CAN_MB02_ID0, val) +#define bfin_read_CAN_MB02_ID1() bfin_read16(CAN_MB02_ID1) +#define bfin_write_CAN_MB02_ID1(val) bfin_write16(CAN_MB02_ID1, val) +#define bfin_read_CAN_MB03_DATA0() bfin_read16(CAN_MB03_DATA0) +#define bfin_write_CAN_MB03_DATA0(val) bfin_write16(CAN_MB03_DATA0, val) +#define bfin_read_CAN_MB03_DATA1() bfin_read16(CAN_MB03_DATA1) +#define bfin_write_CAN_MB03_DATA1(val) bfin_write16(CAN_MB03_DATA1, val) +#define bfin_read_CAN_MB03_DATA2() bfin_read16(CAN_MB03_DATA2) +#define bfin_write_CAN_MB03_DATA2(val) bfin_write16(CAN_MB03_DATA2, val) +#define bfin_read_CAN_MB03_DATA3() bfin_read16(CAN_MB03_DATA3) +#define bfin_write_CAN_MB03_DATA3(val) bfin_write16(CAN_MB03_DATA3, val) +#define bfin_read_CAN_MB03_LENGTH() bfin_read16(CAN_MB03_LENGTH) +#define bfin_write_CAN_MB03_LENGTH(val) bfin_write16(CAN_MB03_LENGTH, val) +#define bfin_read_CAN_MB03_TIMESTAMP() bfin_read16(CAN_MB03_TIMESTAMP) +#define bfin_write_CAN_MB03_TIMESTAMP(val) bfin_write16(CAN_MB03_TIMESTAMP, val) +#define bfin_read_CAN_MB03_ID0() bfin_read16(CAN_MB03_ID0) +#define bfin_write_CAN_MB03_ID0(val) bfin_write16(CAN_MB03_ID0, val) +#define bfin_read_CAN_MB03_ID1() bfin_read16(CAN_MB03_ID1) +#define bfin_write_CAN_MB03_ID1(val) bfin_write16(CAN_MB03_ID1, val) +#define bfin_read_CAN_MB04_DATA0() bfin_read16(CAN_MB04_DATA0) +#define bfin_write_CAN_MB04_DATA0(val) bfin_write16(CAN_MB04_DATA0, val) +#define bfin_read_CAN_MB04_DATA1() bfin_read16(CAN_MB04_DATA1) +#define bfin_write_CAN_MB04_DATA1(val) bfin_write16(CAN_MB04_DATA1, val) +#define bfin_read_CAN_MB04_DATA2() bfin_read16(CAN_MB04_DATA2) +#define bfin_write_CAN_MB04_DATA2(val) bfin_write16(CAN_MB04_DATA2, val) +#define bfin_read_CAN_MB04_DATA3() bfin_read16(CAN_MB04_DATA3) +#define bfin_write_CAN_MB04_DATA3(val) bfin_write16(CAN_MB04_DATA3, val) +#define bfin_read_CAN_MB04_LENGTH() bfin_read16(CAN_MB04_LENGTH) +#define bfin_write_CAN_MB04_LENGTH(val) bfin_write16(CAN_MB04_LENGTH, val) +#define bfin_read_CAN_MB04_TIMESTAMP() bfin_read16(CAN_MB04_TIMESTAMP) +#define bfin_write_CAN_MB04_TIMESTAMP(val) bfin_write16(CAN_MB04_TIMESTAMP, val) +#define bfin_read_CAN_MB04_ID0() bfin_read16(CAN_MB04_ID0) +#define bfin_write_CAN_MB04_ID0(val) bfin_write16(CAN_MB04_ID0, val) +#define bfin_read_CAN_MB04_ID1() bfin_read16(CAN_MB04_ID1) +#define bfin_write_CAN_MB04_ID1(val) bfin_write16(CAN_MB04_ID1, val) +#define bfin_read_CAN_MB05_DATA0() bfin_read16(CAN_MB05_DATA0) +#define bfin_write_CAN_MB05_DATA0(val) bfin_write16(CAN_MB05_DATA0, val) +#define bfin_read_CAN_MB05_DATA1() bfin_read16(CAN_MB05_DATA1) +#define bfin_write_CAN_MB05_DATA1(val) bfin_write16(CAN_MB05_DATA1, val) +#define bfin_read_CAN_MB05_DATA2() bfin_read16(CAN_MB05_DATA2) +#define bfin_write_CAN_MB05_DATA2(val) bfin_write16(CAN_MB05_DATA2, val) +#define bfin_read_CAN_MB05_DATA3() bfin_read16(CAN_MB05_DATA3) +#define bfin_write_CAN_MB05_DATA3(val) bfin_write16(CAN_MB05_DATA3, val) +#define bfin_read_CAN_MB05_LENGTH() bfin_read16(CAN_MB05_LENGTH) +#define bfin_write_CAN_MB05_LENGTH(val) bfin_write16(CAN_MB05_LENGTH, val) +#define bfin_read_CAN_MB05_TIMESTAMP() bfin_read16(CAN_MB05_TIMESTAMP) +#define bfin_write_CAN_MB05_TIMESTAMP(val) bfin_write16(CAN_MB05_TIMESTAMP, val) +#define bfin_read_CAN_MB05_ID0() bfin_read16(CAN_MB05_ID0) +#define bfin_write_CAN_MB05_ID0(val) bfin_write16(CAN_MB05_ID0, val) +#define bfin_read_CAN_MB05_ID1() bfin_read16(CAN_MB05_ID1) +#define bfin_write_CAN_MB05_ID1(val) bfin_write16(CAN_MB05_ID1, val) +#define bfin_read_CAN_MB06_DATA0() bfin_read16(CAN_MB06_DATA0) +#define bfin_write_CAN_MB06_DATA0(val) bfin_write16(CAN_MB06_DATA0, val) +#define bfin_read_CAN_MB06_DATA1() bfin_read16(CAN_MB06_DATA1) +#define bfin_write_CAN_MB06_DATA1(val) bfin_write16(CAN_MB06_DATA1, val) +#define bfin_read_CAN_MB06_DATA2() bfin_read16(CAN_MB06_DATA2) +#define bfin_write_CAN_MB06_DATA2(val) bfin_write16(CAN_MB06_DATA2, val) +#define bfin_read_CAN_MB06_DATA3() bfin_read16(CAN_MB06_DATA3) +#define bfin_write_CAN_MB06_DATA3(val) bfin_write16(CAN_MB06_DATA3, val) +#define bfin_read_CAN_MB06_LENGTH() bfin_read16(CAN_MB06_LENGTH) +#define bfin_write_CAN_MB06_LENGTH(val) bfin_write16(CAN_MB06_LENGTH, val) +#define bfin_read_CAN_MB06_TIMESTAMP() bfin_read16(CAN_MB06_TIMESTAMP) +#define bfin_write_CAN_MB06_TIMESTAMP(val) bfin_write16(CAN_MB06_TIMESTAMP, val) +#define bfin_read_CAN_MB06_ID0() bfin_read16(CAN_MB06_ID0) +#define bfin_write_CAN_MB06_ID0(val) bfin_write16(CAN_MB06_ID0, val) +#define bfin_read_CAN_MB06_ID1() bfin_read16(CAN_MB06_ID1) +#define bfin_write_CAN_MB06_ID1(val) bfin_write16(CAN_MB06_ID1, val) +#define bfin_read_CAN_MB07_DATA0() bfin_read16(CAN_MB07_DATA0) +#define bfin_write_CAN_MB07_DATA0(val) bfin_write16(CAN_MB07_DATA0, val) +#define bfin_read_CAN_MB07_DATA1() bfin_read16(CAN_MB07_DATA1) +#define bfin_write_CAN_MB07_DATA1(val) bfin_write16(CAN_MB07_DATA1, val) +#define bfin_read_CAN_MB07_DATA2() bfin_read16(CAN_MB07_DATA2) +#define bfin_write_CAN_MB07_DATA2(val) bfin_write16(CAN_MB07_DATA2, val) +#define bfin_read_CAN_MB07_DATA3() bfin_read16(CAN_MB07_DATA3) +#define bfin_write_CAN_MB07_DATA3(val) bfin_write16(CAN_MB07_DATA3, val) +#define bfin_read_CAN_MB07_LENGTH() bfin_read16(CAN_MB07_LENGTH) +#define bfin_write_CAN_MB07_LENGTH(val) bfin_write16(CAN_MB07_LENGTH, val) +#define bfin_read_CAN_MB07_TIMESTAMP() bfin_read16(CAN_MB07_TIMESTAMP) +#define bfin_write_CAN_MB07_TIMESTAMP(val) bfin_write16(CAN_MB07_TIMESTAMP, val) +#define bfin_read_CAN_MB07_ID0() bfin_read16(CAN_MB07_ID0) +#define bfin_write_CAN_MB07_ID0(val) bfin_write16(CAN_MB07_ID0, val) +#define bfin_read_CAN_MB07_ID1() bfin_read16(CAN_MB07_ID1) +#define bfin_write_CAN_MB07_ID1(val) bfin_write16(CAN_MB07_ID1, val) +#define bfin_read_CAN_MB08_DATA0() bfin_read16(CAN_MB08_DATA0) +#define bfin_write_CAN_MB08_DATA0(val) bfin_write16(CAN_MB08_DATA0, val) +#define bfin_read_CAN_MB08_DATA1() bfin_read16(CAN_MB08_DATA1) +#define bfin_write_CAN_MB08_DATA1(val) bfin_write16(CAN_MB08_DATA1, val) +#define bfin_read_CAN_MB08_DATA2() bfin_read16(CAN_MB08_DATA2) +#define bfin_write_CAN_MB08_DATA2(val) bfin_write16(CAN_MB08_DATA2, val) +#define bfin_read_CAN_MB08_DATA3() bfin_read16(CAN_MB08_DATA3) +#define bfin_write_CAN_MB08_DATA3(val) bfin_write16(CAN_MB08_DATA3, val) +#define bfin_read_CAN_MB08_LENGTH() bfin_read16(CAN_MB08_LENGTH) +#define bfin_write_CAN_MB08_LENGTH(val) bfin_write16(CAN_MB08_LENGTH, val) +#define bfin_read_CAN_MB08_TIMESTAMP() bfin_read16(CAN_MB08_TIMESTAMP) +#define bfin_write_CAN_MB08_TIMESTAMP(val) bfin_write16(CAN_MB08_TIMESTAMP, val) +#define bfin_read_CAN_MB08_ID0() bfin_read16(CAN_MB08_ID0) +#define bfin_write_CAN_MB08_ID0(val) bfin_write16(CAN_MB08_ID0, val) +#define bfin_read_CAN_MB08_ID1() bfin_read16(CAN_MB08_ID1) +#define bfin_write_CAN_MB08_ID1(val) bfin_write16(CAN_MB08_ID1, val) +#define bfin_read_CAN_MB09_DATA0() bfin_read16(CAN_MB09_DATA0) +#define bfin_write_CAN_MB09_DATA0(val) bfin_write16(CAN_MB09_DATA0, val) +#define bfin_read_CAN_MB09_DATA1() bfin_read16(CAN_MB09_DATA1) +#define bfin_write_CAN_MB09_DATA1(val) bfin_write16(CAN_MB09_DATA1, val) +#define bfin_read_CAN_MB09_DATA2() bfin_read16(CAN_MB09_DATA2) +#define bfin_write_CAN_MB09_DATA2(val) bfin_write16(CAN_MB09_DATA2, val) +#define bfin_read_CAN_MB09_DATA3() bfin_read16(CAN_MB09_DATA3) +#define bfin_write_CAN_MB09_DATA3(val) bfin_write16(CAN_MB09_DATA3, val) +#define bfin_read_CAN_MB09_LENGTH() bfin_read16(CAN_MB09_LENGTH) +#define bfin_write_CAN_MB09_LENGTH(val) bfin_write16(CAN_MB09_LENGTH, val) +#define bfin_read_CAN_MB09_TIMESTAMP() bfin_read16(CAN_MB09_TIMESTAMP) +#define bfin_write_CAN_MB09_TIMESTAMP(val) bfin_write16(CAN_MB09_TIMESTAMP, val) +#define bfin_read_CAN_MB09_ID0() bfin_read16(CAN_MB09_ID0) +#define bfin_write_CAN_MB09_ID0(val) bfin_write16(CAN_MB09_ID0, val) +#define bfin_read_CAN_MB09_ID1() bfin_read16(CAN_MB09_ID1) +#define bfin_write_CAN_MB09_ID1(val) bfin_write16(CAN_MB09_ID1, val) +#define bfin_read_CAN_MB10_DATA0() bfin_read16(CAN_MB10_DATA0) +#define bfin_write_CAN_MB10_DATA0(val) bfin_write16(CAN_MB10_DATA0, val) +#define bfin_read_CAN_MB10_DATA1() bfin_read16(CAN_MB10_DATA1) +#define bfin_write_CAN_MB10_DATA1(val) bfin_write16(CAN_MB10_DATA1, val) +#define bfin_read_CAN_MB10_DATA2() bfin_read16(CAN_MB10_DATA2) +#define bfin_write_CAN_MB10_DATA2(val) bfin_write16(CAN_MB10_DATA2, val) +#define bfin_read_CAN_MB10_DATA3() bfin_read16(CAN_MB10_DATA3) +#define bfin_write_CAN_MB10_DATA3(val) bfin_write16(CAN_MB10_DATA3, val) +#define bfin_read_CAN_MB10_LENGTH() bfin_read16(CAN_MB10_LENGTH) +#define bfin_write_CAN_MB10_LENGTH(val) bfin_write16(CAN_MB10_LENGTH, val) +#define bfin_read_CAN_MB10_TIMESTAMP() bfin_read16(CAN_MB10_TIMESTAMP) +#define bfin_write_CAN_MB10_TIMESTAMP(val) bfin_write16(CAN_MB10_TIMESTAMP, val) +#define bfin_read_CAN_MB10_ID0() bfin_read16(CAN_MB10_ID0) +#define bfin_write_CAN_MB10_ID0(val) bfin_write16(CAN_MB10_ID0, val) +#define bfin_read_CAN_MB10_ID1() bfin_read16(CAN_MB10_ID1) +#define bfin_write_CAN_MB10_ID1(val) bfin_write16(CAN_MB10_ID1, val) +#define bfin_read_CAN_MB11_DATA0() bfin_read16(CAN_MB11_DATA0) +#define bfin_write_CAN_MB11_DATA0(val) bfin_write16(CAN_MB11_DATA0, val) +#define bfin_read_CAN_MB11_DATA1() bfin_read16(CAN_MB11_DATA1) +#define bfin_write_CAN_MB11_DATA1(val) bfin_write16(CAN_MB11_DATA1, val) +#define bfin_read_CAN_MB11_DATA2() bfin_read16(CAN_MB11_DATA2) +#define bfin_write_CAN_MB11_DATA2(val) bfin_write16(CAN_MB11_DATA2, val) +#define bfin_read_CAN_MB11_DATA3() bfin_read16(CAN_MB11_DATA3) +#define bfin_write_CAN_MB11_DATA3(val) bfin_write16(CAN_MB11_DATA3, val) +#define bfin_read_CAN_MB11_LENGTH() bfin_read16(CAN_MB11_LENGTH) +#define bfin_write_CAN_MB11_LENGTH(val) bfin_write16(CAN_MB11_LENGTH, val) +#define bfin_read_CAN_MB11_TIMESTAMP() bfin_read16(CAN_MB11_TIMESTAMP) +#define bfin_write_CAN_MB11_TIMESTAMP(val) bfin_write16(CAN_MB11_TIMESTAMP, val) +#define bfin_read_CAN_MB11_ID0() bfin_read16(CAN_MB11_ID0) +#define bfin_write_CAN_MB11_ID0(val) bfin_write16(CAN_MB11_ID0, val) +#define bfin_read_CAN_MB11_ID1() bfin_read16(CAN_MB11_ID1) +#define bfin_write_CAN_MB11_ID1(val) bfin_write16(CAN_MB11_ID1, val) +#define bfin_read_CAN_MB12_DATA0() bfin_read16(CAN_MB12_DATA0) +#define bfin_write_CAN_MB12_DATA0(val) bfin_write16(CAN_MB12_DATA0, val) +#define bfin_read_CAN_MB12_DATA1() bfin_read16(CAN_MB12_DATA1) +#define bfin_write_CAN_MB12_DATA1(val) bfin_write16(CAN_MB12_DATA1, val) +#define bfin_read_CAN_MB12_DATA2() bfin_read16(CAN_MB12_DATA2) +#define bfin_write_CAN_MB12_DATA2(val) bfin_write16(CAN_MB12_DATA2, val) +#define bfin_read_CAN_MB12_DATA3() bfin_read16(CAN_MB12_DATA3) +#define bfin_write_CAN_MB12_DATA3(val) bfin_write16(CAN_MB12_DATA3, val) +#define bfin_read_CAN_MB12_LENGTH() bfin_read16(CAN_MB12_LENGTH) +#define bfin_write_CAN_MB12_LENGTH(val) bfin_write16(CAN_MB12_LENGTH, val) +#define bfin_read_CAN_MB12_TIMESTAMP() bfin_read16(CAN_MB12_TIMESTAMP) +#define bfin_write_CAN_MB12_TIMESTAMP(val) bfin_write16(CAN_MB12_TIMESTAMP, val) +#define bfin_read_CAN_MB12_ID0() bfin_read16(CAN_MB12_ID0) +#define bfin_write_CAN_MB12_ID0(val) bfin_write16(CAN_MB12_ID0, val) +#define bfin_read_CAN_MB12_ID1() bfin_read16(CAN_MB12_ID1) +#define bfin_write_CAN_MB12_ID1(val) bfin_write16(CAN_MB12_ID1, val) +#define bfin_read_CAN_MB13_DATA0() bfin_read16(CAN_MB13_DATA0) +#define bfin_write_CAN_MB13_DATA0(val) bfin_write16(CAN_MB13_DATA0, val) +#define bfin_read_CAN_MB13_DATA1() bfin_read16(CAN_MB13_DATA1) +#define bfin_write_CAN_MB13_DATA1(val) bfin_write16(CAN_MB13_DATA1, val) +#define bfin_read_CAN_MB13_DATA2() bfin_read16(CAN_MB13_DATA2) +#define bfin_write_CAN_MB13_DATA2(val) bfin_write16(CAN_MB13_DATA2, val) +#define bfin_read_CAN_MB13_DATA3() bfin_read16(CAN_MB13_DATA3) +#define bfin_write_CAN_MB13_DATA3(val) bfin_write16(CAN_MB13_DATA3, val) +#define bfin_read_CAN_MB13_LENGTH() bfin_read16(CAN_MB13_LENGTH) +#define bfin_write_CAN_MB13_LENGTH(val) bfin_write16(CAN_MB13_LENGTH, val) +#define bfin_read_CAN_MB13_TIMESTAMP() bfin_read16(CAN_MB13_TIMESTAMP) +#define bfin_write_CAN_MB13_TIMESTAMP(val) bfin_write16(CAN_MB13_TIMESTAMP, val) +#define bfin_read_CAN_MB13_ID0() bfin_read16(CAN_MB13_ID0) +#define bfin_write_CAN_MB13_ID0(val) bfin_write16(CAN_MB13_ID0, val) +#define bfin_read_CAN_MB13_ID1() bfin_read16(CAN_MB13_ID1) +#define bfin_write_CAN_MB13_ID1(val) bfin_write16(CAN_MB13_ID1, val) +#define bfin_read_CAN_MB14_DATA0() bfin_read16(CAN_MB14_DATA0) +#define bfin_write_CAN_MB14_DATA0(val) bfin_write16(CAN_MB14_DATA0, val) +#define bfin_read_CAN_MB14_DATA1() bfin_read16(CAN_MB14_DATA1) +#define bfin_write_CAN_MB14_DATA1(val) bfin_write16(CAN_MB14_DATA1, val) +#define bfin_read_CAN_MB14_DATA2() bfin_read16(CAN_MB14_DATA2) +#define bfin_write_CAN_MB14_DATA2(val) bfin_write16(CAN_MB14_DATA2, val) +#define bfin_read_CAN_MB14_DATA3() bfin_read16(CAN_MB14_DATA3) +#define bfin_write_CAN_MB14_DATA3(val) bfin_write16(CAN_MB14_DATA3, val) +#define bfin_read_CAN_MB14_LENGTH() bfin_read16(CAN_MB14_LENGTH) +#define bfin_write_CAN_MB14_LENGTH(val) bfin_write16(CAN_MB14_LENGTH, val) +#define bfin_read_CAN_MB14_TIMESTAMP() bfin_read16(CAN_MB14_TIMESTAMP) +#define bfin_write_CAN_MB14_TIMESTAMP(val) bfin_write16(CAN_MB14_TIMESTAMP, val) +#define bfin_read_CAN_MB14_ID0() bfin_read16(CAN_MB14_ID0) +#define bfin_write_CAN_MB14_ID0(val) bfin_write16(CAN_MB14_ID0, val) +#define bfin_read_CAN_MB14_ID1() bfin_read16(CAN_MB14_ID1) +#define bfin_write_CAN_MB14_ID1(val) bfin_write16(CAN_MB14_ID1, val) +#define bfin_read_CAN_MB15_DATA0() bfin_read16(CAN_MB15_DATA0) +#define bfin_write_CAN_MB15_DATA0(val) bfin_write16(CAN_MB15_DATA0, val) +#define bfin_read_CAN_MB15_DATA1() bfin_read16(CAN_MB15_DATA1) +#define bfin_write_CAN_MB15_DATA1(val) bfin_write16(CAN_MB15_DATA1, val) +#define bfin_read_CAN_MB15_DATA2() bfin_read16(CAN_MB15_DATA2) +#define bfin_write_CAN_MB15_DATA2(val) bfin_write16(CAN_MB15_DATA2, val) +#define bfin_read_CAN_MB15_DATA3() bfin_read16(CAN_MB15_DATA3) +#define bfin_write_CAN_MB15_DATA3(val) bfin_write16(CAN_MB15_DATA3, val) +#define bfin_read_CAN_MB15_LENGTH() bfin_read16(CAN_MB15_LENGTH) +#define bfin_write_CAN_MB15_LENGTH(val) bfin_write16(CAN_MB15_LENGTH, val) +#define bfin_read_CAN_MB15_TIMESTAMP() bfin_read16(CAN_MB15_TIMESTAMP) +#define bfin_write_CAN_MB15_TIMESTAMP(val) bfin_write16(CAN_MB15_TIMESTAMP, val) +#define bfin_read_CAN_MB15_ID0() bfin_read16(CAN_MB15_ID0) +#define bfin_write_CAN_MB15_ID0(val) bfin_write16(CAN_MB15_ID0, val) +#define bfin_read_CAN_MB15_ID1() bfin_read16(CAN_MB15_ID1) +#define bfin_write_CAN_MB15_ID1(val) bfin_write16(CAN_MB15_ID1, val) +#define bfin_read_CAN_MB16_DATA0() bfin_read16(CAN_MB16_DATA0) +#define bfin_write_CAN_MB16_DATA0(val) bfin_write16(CAN_MB16_DATA0, val) +#define bfin_read_CAN_MB16_DATA1() bfin_read16(CAN_MB16_DATA1) +#define bfin_write_CAN_MB16_DATA1(val) bfin_write16(CAN_MB16_DATA1, val) +#define bfin_read_CAN_MB16_DATA2() bfin_read16(CAN_MB16_DATA2) +#define bfin_write_CAN_MB16_DATA2(val) bfin_write16(CAN_MB16_DATA2, val) +#define bfin_read_CAN_MB16_DATA3() bfin_read16(CAN_MB16_DATA3) +#define bfin_write_CAN_MB16_DATA3(val) bfin_write16(CAN_MB16_DATA3, val) +#define bfin_read_CAN_MB16_LENGTH() bfin_read16(CAN_MB16_LENGTH) +#define bfin_write_CAN_MB16_LENGTH(val) bfin_write16(CAN_MB16_LENGTH, val) +#define bfin_read_CAN_MB16_TIMESTAMP() bfin_read16(CAN_MB16_TIMESTAMP) +#define bfin_write_CAN_MB16_TIMESTAMP(val) bfin_write16(CAN_MB16_TIMESTAMP, val) +#define bfin_read_CAN_MB16_ID0() bfin_read16(CAN_MB16_ID0) +#define bfin_write_CAN_MB16_ID0(val) bfin_write16(CAN_MB16_ID0, val) +#define bfin_read_CAN_MB16_ID1() bfin_read16(CAN_MB16_ID1) +#define bfin_write_CAN_MB16_ID1(val) bfin_write16(CAN_MB16_ID1, val) +#define bfin_read_CAN_MB17_DATA0() bfin_read16(CAN_MB17_DATA0) +#define bfin_write_CAN_MB17_DATA0(val) bfin_write16(CAN_MB17_DATA0, val) +#define bfin_read_CAN_MB17_DATA1() bfin_read16(CAN_MB17_DATA1) +#define bfin_write_CAN_MB17_DATA1(val) bfin_write16(CAN_MB17_DATA1, val) +#define bfin_read_CAN_MB17_DATA2() bfin_read16(CAN_MB17_DATA2) +#define bfin_write_CAN_MB17_DATA2(val) bfin_write16(CAN_MB17_DATA2, val) +#define bfin_read_CAN_MB17_DATA3() bfin_read16(CAN_MB17_DATA3) +#define bfin_write_CAN_MB17_DATA3(val) bfin_write16(CAN_MB17_DATA3, val) +#define bfin_read_CAN_MB17_LENGTH() bfin_read16(CAN_MB17_LENGTH) +#define bfin_write_CAN_MB17_LENGTH(val) bfin_write16(CAN_MB17_LENGTH, val) +#define bfin_read_CAN_MB17_TIMESTAMP() bfin_read16(CAN_MB17_TIMESTAMP) +#define bfin_write_CAN_MB17_TIMESTAMP(val) bfin_write16(CAN_MB17_TIMESTAMP, val) +#define bfin_read_CAN_MB17_ID0() bfin_read16(CAN_MB17_ID0) +#define bfin_write_CAN_MB17_ID0(val) bfin_write16(CAN_MB17_ID0, val) +#define bfin_read_CAN_MB17_ID1() bfin_read16(CAN_MB17_ID1) +#define bfin_write_CAN_MB17_ID1(val) bfin_write16(CAN_MB17_ID1, val) +#define bfin_read_CAN_MB18_DATA0() bfin_read16(CAN_MB18_DATA0) +#define bfin_write_CAN_MB18_DATA0(val) bfin_write16(CAN_MB18_DATA0, val) +#define bfin_read_CAN_MB18_DATA1() bfin_read16(CAN_MB18_DATA1) +#define bfin_write_CAN_MB18_DATA1(val) bfin_write16(CAN_MB18_DATA1, val) +#define bfin_read_CAN_MB18_DATA2() bfin_read16(CAN_MB18_DATA2) +#define bfin_write_CAN_MB18_DATA2(val) bfin_write16(CAN_MB18_DATA2, val) +#define bfin_read_CAN_MB18_DATA3() bfin_read16(CAN_MB18_DATA3) +#define bfin_write_CAN_MB18_DATA3(val) bfin_write16(CAN_MB18_DATA3, val) +#define bfin_read_CAN_MB18_LENGTH() bfin_read16(CAN_MB18_LENGTH) +#define bfin_write_CAN_MB18_LENGTH(val) bfin_write16(CAN_MB18_LENGTH, val) +#define bfin_read_CAN_MB18_TIMESTAMP() bfin_read16(CAN_MB18_TIMESTAMP) +#define bfin_write_CAN_MB18_TIMESTAMP(val) bfin_write16(CAN_MB18_TIMESTAMP, val) +#define bfin_read_CAN_MB18_ID0() bfin_read16(CAN_MB18_ID0) +#define bfin_write_CAN_MB18_ID0(val) bfin_write16(CAN_MB18_ID0, val) +#define bfin_read_CAN_MB18_ID1() bfin_read16(CAN_MB18_ID1) +#define bfin_write_CAN_MB18_ID1(val) bfin_write16(CAN_MB18_ID1, val) +#define bfin_read_CAN_MB19_DATA0() bfin_read16(CAN_MB19_DATA0) +#define bfin_write_CAN_MB19_DATA0(val) bfin_write16(CAN_MB19_DATA0, val) +#define bfin_read_CAN_MB19_DATA1() bfin_read16(CAN_MB19_DATA1) +#define bfin_write_CAN_MB19_DATA1(val) bfin_write16(CAN_MB19_DATA1, val) +#define bfin_read_CAN_MB19_DATA2() bfin_read16(CAN_MB19_DATA2) +#define bfin_write_CAN_MB19_DATA2(val) bfin_write16(CAN_MB19_DATA2, val) +#define bfin_read_CAN_MB19_DATA3() bfin_read16(CAN_MB19_DATA3) +#define bfin_write_CAN_MB19_DATA3(val) bfin_write16(CAN_MB19_DATA3, val) +#define bfin_read_CAN_MB19_LENGTH() bfin_read16(CAN_MB19_LENGTH) +#define bfin_write_CAN_MB19_LENGTH(val) bfin_write16(CAN_MB19_LENGTH, val) +#define bfin_read_CAN_MB19_TIMESTAMP() bfin_read16(CAN_MB19_TIMESTAMP) +#define bfin_write_CAN_MB19_TIMESTAMP(val) bfin_write16(CAN_MB19_TIMESTAMP, val) +#define bfin_read_CAN_MB19_ID0() bfin_read16(CAN_MB19_ID0) +#define bfin_write_CAN_MB19_ID0(val) bfin_write16(CAN_MB19_ID0, val) +#define bfin_read_CAN_MB19_ID1() bfin_read16(CAN_MB19_ID1) +#define bfin_write_CAN_MB19_ID1(val) bfin_write16(CAN_MB19_ID1, val) +#define bfin_read_CAN_MB20_DATA0() bfin_read16(CAN_MB20_DATA0) +#define bfin_write_CAN_MB20_DATA0(val) bfin_write16(CAN_MB20_DATA0, val) +#define bfin_read_CAN_MB20_DATA1() bfin_read16(CAN_MB20_DATA1) +#define bfin_write_CAN_MB20_DATA1(val) bfin_write16(CAN_MB20_DATA1, val) +#define bfin_read_CAN_MB20_DATA2() bfin_read16(CAN_MB20_DATA2) +#define bfin_write_CAN_MB20_DATA2(val) bfin_write16(CAN_MB20_DATA2, val) +#define bfin_read_CAN_MB20_DATA3() bfin_read16(CAN_MB20_DATA3) +#define bfin_write_CAN_MB20_DATA3(val) bfin_write16(CAN_MB20_DATA3, val) +#define bfin_read_CAN_MB20_LENGTH() bfin_read16(CAN_MB20_LENGTH) +#define bfin_write_CAN_MB20_LENGTH(val) bfin_write16(CAN_MB20_LENGTH, val) +#define bfin_read_CAN_MB20_TIMESTAMP() bfin_read16(CAN_MB20_TIMESTAMP) +#define bfin_write_CAN_MB20_TIMESTAMP(val) bfin_write16(CAN_MB20_TIMESTAMP, val) +#define bfin_read_CAN_MB20_ID0() bfin_read16(CAN_MB20_ID0) +#define bfin_write_CAN_MB20_ID0(val) bfin_write16(CAN_MB20_ID0, val) +#define bfin_read_CAN_MB20_ID1() bfin_read16(CAN_MB20_ID1) +#define bfin_write_CAN_MB20_ID1(val) bfin_write16(CAN_MB20_ID1, val) +#define bfin_read_CAN_MB21_DATA0() bfin_read16(CAN_MB21_DATA0) +#define bfin_write_CAN_MB21_DATA0(val) bfin_write16(CAN_MB21_DATA0, val) +#define bfin_read_CAN_MB21_DATA1() bfin_read16(CAN_MB21_DATA1) +#define bfin_write_CAN_MB21_DATA1(val) bfin_write16(CAN_MB21_DATA1, val) +#define bfin_read_CAN_MB21_DATA2() bfin_read16(CAN_MB21_DATA2) +#define bfin_write_CAN_MB21_DATA2(val) bfin_write16(CAN_MB21_DATA2, val) +#define bfin_read_CAN_MB21_DATA3() bfin_read16(CAN_MB21_DATA3) +#define bfin_write_CAN_MB21_DATA3(val) bfin_write16(CAN_MB21_DATA3, val) +#define bfin_read_CAN_MB21_LENGTH() bfin_read16(CAN_MB21_LENGTH) +#define bfin_write_CAN_MB21_LENGTH(val) bfin_write16(CAN_MB21_LENGTH, val) +#define bfin_read_CAN_MB21_TIMESTAMP() bfin_read16(CAN_MB21_TIMESTAMP) +#define bfin_write_CAN_MB21_TIMESTAMP(val) bfin_write16(CAN_MB21_TIMESTAMP, val) +#define bfin_read_CAN_MB21_ID0() bfin_read16(CAN_MB21_ID0) +#define bfin_write_CAN_MB21_ID0(val) bfin_write16(CAN_MB21_ID0, val) +#define bfin_read_CAN_MB21_ID1() bfin_read16(CAN_MB21_ID1) +#define bfin_write_CAN_MB21_ID1(val) bfin_write16(CAN_MB21_ID1, val) +#define bfin_read_CAN_MB22_DATA0() bfin_read16(CAN_MB22_DATA0) +#define bfin_write_CAN_MB22_DATA0(val) bfin_write16(CAN_MB22_DATA0, val) +#define bfin_read_CAN_MB22_DATA1() bfin_read16(CAN_MB22_DATA1) +#define bfin_write_CAN_MB22_DATA1(val) bfin_write16(CAN_MB22_DATA1, val) +#define bfin_read_CAN_MB22_DATA2() bfin_read16(CAN_MB22_DATA2) +#define bfin_write_CAN_MB22_DATA2(val) bfin_write16(CAN_MB22_DATA2, val) +#define bfin_read_CAN_MB22_DATA3() bfin_read16(CAN_MB22_DATA3) +#define bfin_write_CAN_MB22_DATA3(val) bfin_write16(CAN_MB22_DATA3, val) +#define bfin_read_CAN_MB22_LENGTH() bfin_read16(CAN_MB22_LENGTH) +#define bfin_write_CAN_MB22_LENGTH(val) bfin_write16(CAN_MB22_LENGTH, val) +#define bfin_read_CAN_MB22_TIMESTAMP() bfin_read16(CAN_MB22_TIMESTAMP) +#define bfin_write_CAN_MB22_TIMESTAMP(val) bfin_write16(CAN_MB22_TIMESTAMP, val) +#define bfin_read_CAN_MB22_ID0() bfin_read16(CAN_MB22_ID0) +#define bfin_write_CAN_MB22_ID0(val) bfin_write16(CAN_MB22_ID0, val) +#define bfin_read_CAN_MB22_ID1() bfin_read16(CAN_MB22_ID1) +#define bfin_write_CAN_MB22_ID1(val) bfin_write16(CAN_MB22_ID1, val) +#define bfin_read_CAN_MB23_DATA0() bfin_read16(CAN_MB23_DATA0) +#define bfin_write_CAN_MB23_DATA0(val) bfin_write16(CAN_MB23_DATA0, val) +#define bfin_read_CAN_MB23_DATA1() bfin_read16(CAN_MB23_DATA1) +#define bfin_write_CAN_MB23_DATA1(val) bfin_write16(CAN_MB23_DATA1, val) +#define bfin_read_CAN_MB23_DATA2() bfin_read16(CAN_MB23_DATA2) +#define bfin_write_CAN_MB23_DATA2(val) bfin_write16(CAN_MB23_DATA2, val) +#define bfin_read_CAN_MB23_DATA3() bfin_read16(CAN_MB23_DATA3) +#define bfin_write_CAN_MB23_DATA3(val) bfin_write16(CAN_MB23_DATA3, val) +#define bfin_read_CAN_MB23_LENGTH() bfin_read16(CAN_MB23_LENGTH) +#define bfin_write_CAN_MB23_LENGTH(val) bfin_write16(CAN_MB23_LENGTH, val) +#define bfin_read_CAN_MB23_TIMESTAMP() bfin_read16(CAN_MB23_TIMESTAMP) +#define bfin_write_CAN_MB23_TIMESTAMP(val) bfin_write16(CAN_MB23_TIMESTAMP, val) +#define bfin_read_CAN_MB23_ID0() bfin_read16(CAN_MB23_ID0) +#define bfin_write_CAN_MB23_ID0(val) bfin_write16(CAN_MB23_ID0, val) +#define bfin_read_CAN_MB23_ID1() bfin_read16(CAN_MB23_ID1) +#define bfin_write_CAN_MB23_ID1(val) bfin_write16(CAN_MB23_ID1, val) +#define bfin_read_CAN_MB24_DATA0() bfin_read16(CAN_MB24_DATA0) +#define bfin_write_CAN_MB24_DATA0(val) bfin_write16(CAN_MB24_DATA0, val) +#define bfin_read_CAN_MB24_DATA1() bfin_read16(CAN_MB24_DATA1) +#define bfin_write_CAN_MB24_DATA1(val) bfin_write16(CAN_MB24_DATA1, val) +#define bfin_read_CAN_MB24_DATA2() bfin_read16(CAN_MB24_DATA2) +#define bfin_write_CAN_MB24_DATA2(val) bfin_write16(CAN_MB24_DATA2, val) +#define bfin_read_CAN_MB24_DATA3() bfin_read16(CAN_MB24_DATA3) +#define bfin_write_CAN_MB24_DATA3(val) bfin_write16(CAN_MB24_DATA3, val) +#define bfin_read_CAN_MB24_LENGTH() bfin_read16(CAN_MB24_LENGTH) +#define bfin_write_CAN_MB24_LENGTH(val) bfin_write16(CAN_MB24_LENGTH, val) +#define bfin_read_CAN_MB24_TIMESTAMP() bfin_read16(CAN_MB24_TIMESTAMP) +#define bfin_write_CAN_MB24_TIMESTAMP(val) bfin_write16(CAN_MB24_TIMESTAMP, val) +#define bfin_read_CAN_MB24_ID0() bfin_read16(CAN_MB24_ID0) +#define bfin_write_CAN_MB24_ID0(val) bfin_write16(CAN_MB24_ID0, val) +#define bfin_read_CAN_MB24_ID1() bfin_read16(CAN_MB24_ID1) +#define bfin_write_CAN_MB24_ID1(val) bfin_write16(CAN_MB24_ID1, val) +#define bfin_read_CAN_MB25_DATA0() bfin_read16(CAN_MB25_DATA0) +#define bfin_write_CAN_MB25_DATA0(val) bfin_write16(CAN_MB25_DATA0, val) +#define bfin_read_CAN_MB25_DATA1() bfin_read16(CAN_MB25_DATA1) +#define bfin_write_CAN_MB25_DATA1(val) bfin_write16(CAN_MB25_DATA1, val) +#define bfin_read_CAN_MB25_DATA2() bfin_read16(CAN_MB25_DATA2) +#define bfin_write_CAN_MB25_DATA2(val) bfin_write16(CAN_MB25_DATA2, val) +#define bfin_read_CAN_MB25_DATA3() bfin_read16(CAN_MB25_DATA3) +#define bfin_write_CAN_MB25_DATA3(val) bfin_write16(CAN_MB25_DATA3, val) +#define bfin_read_CAN_MB25_LENGTH() bfin_read16(CAN_MB25_LENGTH) +#define bfin_write_CAN_MB25_LENGTH(val) bfin_write16(CAN_MB25_LENGTH, val) +#define bfin_read_CAN_MB25_TIMESTAMP() bfin_read16(CAN_MB25_TIMESTAMP) +#define bfin_write_CAN_MB25_TIMESTAMP(val) bfin_write16(CAN_MB25_TIMESTAMP, val) +#define bfin_read_CAN_MB25_ID0() bfin_read16(CAN_MB25_ID0) +#define bfin_write_CAN_MB25_ID0(val) bfin_write16(CAN_MB25_ID0, val) +#define bfin_read_CAN_MB25_ID1() bfin_read16(CAN_MB25_ID1) +#define bfin_write_CAN_MB25_ID1(val) bfin_write16(CAN_MB25_ID1, val) +#define bfin_read_CAN_MB26_DATA0() bfin_read16(CAN_MB26_DATA0) +#define bfin_write_CAN_MB26_DATA0(val) bfin_write16(CAN_MB26_DATA0, val) +#define bfin_read_CAN_MB26_DATA1() bfin_read16(CAN_MB26_DATA1) +#define bfin_write_CAN_MB26_DATA1(val) bfin_write16(CAN_MB26_DATA1, val) +#define bfin_read_CAN_MB26_DATA2() bfin_read16(CAN_MB26_DATA2) +#define bfin_write_CAN_MB26_DATA2(val) bfin_write16(CAN_MB26_DATA2, val) +#define bfin_read_CAN_MB26_DATA3() bfin_read16(CAN_MB26_DATA3) +#define bfin_write_CAN_MB26_DATA3(val) bfin_write16(CAN_MB26_DATA3, val) +#define bfin_read_CAN_MB26_LENGTH() bfin_read16(CAN_MB26_LENGTH) +#define bfin_write_CAN_MB26_LENGTH(val) bfin_write16(CAN_MB26_LENGTH, val) +#define bfin_read_CAN_MB26_TIMESTAMP() bfin_read16(CAN_MB26_TIMESTAMP) +#define bfin_write_CAN_MB26_TIMESTAMP(val) bfin_write16(CAN_MB26_TIMESTAMP, val) +#define bfin_read_CAN_MB26_ID0() bfin_read16(CAN_MB26_ID0) +#define bfin_write_CAN_MB26_ID0(val) bfin_write16(CAN_MB26_ID0, val) +#define bfin_read_CAN_MB26_ID1() bfin_read16(CAN_MB26_ID1) +#define bfin_write_CAN_MB26_ID1(val) bfin_write16(CAN_MB26_ID1, val) +#define bfin_read_CAN_MB27_DATA0() bfin_read16(CAN_MB27_DATA0) +#define bfin_write_CAN_MB27_DATA0(val) bfin_write16(CAN_MB27_DATA0, val) +#define bfin_read_CAN_MB27_DATA1() bfin_read16(CAN_MB27_DATA1) +#define bfin_write_CAN_MB27_DATA1(val) bfin_write16(CAN_MB27_DATA1, val) +#define bfin_read_CAN_MB27_DATA2() bfin_read16(CAN_MB27_DATA2) +#define bfin_write_CAN_MB27_DATA2(val) bfin_write16(CAN_MB27_DATA2, val) +#define bfin_read_CAN_MB27_DATA3() bfin_read16(CAN_MB27_DATA3) +#define bfin_write_CAN_MB27_DATA3(val) bfin_write16(CAN_MB27_DATA3, val) +#define bfin_read_CAN_MB27_LENGTH() bfin_read16(CAN_MB27_LENGTH) +#define bfin_write_CAN_MB27_LENGTH(val) bfin_write16(CAN_MB27_LENGTH, val) +#define bfin_read_CAN_MB27_TIMESTAMP() bfin_read16(CAN_MB27_TIMESTAMP) +#define bfin_write_CAN_MB27_TIMESTAMP(val) bfin_write16(CAN_MB27_TIMESTAMP, val) +#define bfin_read_CAN_MB27_ID0() bfin_read16(CAN_MB27_ID0) +#define bfin_write_CAN_MB27_ID0(val) bfin_write16(CAN_MB27_ID0, val) +#define bfin_read_CAN_MB27_ID1() bfin_read16(CAN_MB27_ID1) +#define bfin_write_CAN_MB27_ID1(val) bfin_write16(CAN_MB27_ID1, val) +#define bfin_read_CAN_MB28_DATA0() bfin_read16(CAN_MB28_DATA0) +#define bfin_write_CAN_MB28_DATA0(val) bfin_write16(CAN_MB28_DATA0, val) +#define bfin_read_CAN_MB28_DATA1() bfin_read16(CAN_MB28_DATA1) +#define bfin_write_CAN_MB28_DATA1(val) bfin_write16(CAN_MB28_DATA1, val) +#define bfin_read_CAN_MB28_DATA2() bfin_read16(CAN_MB28_DATA2) +#define bfin_write_CAN_MB28_DATA2(val) bfin_write16(CAN_MB28_DATA2, val) +#define bfin_read_CAN_MB28_DATA3() bfin_read16(CAN_MB28_DATA3) +#define bfin_write_CAN_MB28_DATA3(val) bfin_write16(CAN_MB28_DATA3, val) +#define bfin_read_CAN_MB28_LENGTH() bfin_read16(CAN_MB28_LENGTH) +#define bfin_write_CAN_MB28_LENGTH(val) bfin_write16(CAN_MB28_LENGTH, val) +#define bfin_read_CAN_MB28_TIMESTAMP() bfin_read16(CAN_MB28_TIMESTAMP) +#define bfin_write_CAN_MB28_TIMESTAMP(val) bfin_write16(CAN_MB28_TIMESTAMP, val) +#define bfin_read_CAN_MB28_ID0() bfin_read16(CAN_MB28_ID0) +#define bfin_write_CAN_MB28_ID0(val) bfin_write16(CAN_MB28_ID0, val) +#define bfin_read_CAN_MB28_ID1() bfin_read16(CAN_MB28_ID1) +#define bfin_write_CAN_MB28_ID1(val) bfin_write16(CAN_MB28_ID1, val) +#define bfin_read_CAN_MB29_DATA0() bfin_read16(CAN_MB29_DATA0) +#define bfin_write_CAN_MB29_DATA0(val) bfin_write16(CAN_MB29_DATA0, val) +#define bfin_read_CAN_MB29_DATA1() bfin_read16(CAN_MB29_DATA1) +#define bfin_write_CAN_MB29_DATA1(val) bfin_write16(CAN_MB29_DATA1, val) +#define bfin_read_CAN_MB29_DATA2() bfin_read16(CAN_MB29_DATA2) +#define bfin_write_CAN_MB29_DATA2(val) bfin_write16(CAN_MB29_DATA2, val) +#define bfin_read_CAN_MB29_DATA3() bfin_read16(CAN_MB29_DATA3) +#define bfin_write_CAN_MB29_DATA3(val) bfin_write16(CAN_MB29_DATA3, val) +#define bfin_read_CAN_MB29_LENGTH() bfin_read16(CAN_MB29_LENGTH) +#define bfin_write_CAN_MB29_LENGTH(val) bfin_write16(CAN_MB29_LENGTH, val) +#define bfin_read_CAN_MB29_TIMESTAMP() bfin_read16(CAN_MB29_TIMESTAMP) +#define bfin_write_CAN_MB29_TIMESTAMP(val) bfin_write16(CAN_MB29_TIMESTAMP, val) +#define bfin_read_CAN_MB29_ID0() bfin_read16(CAN_MB29_ID0) +#define bfin_write_CAN_MB29_ID0(val) bfin_write16(CAN_MB29_ID0, val) +#define bfin_read_CAN_MB29_ID1() bfin_read16(CAN_MB29_ID1) +#define bfin_write_CAN_MB29_ID1(val) bfin_write16(CAN_MB29_ID1, val) +#define bfin_read_CAN_MB30_DATA0() bfin_read16(CAN_MB30_DATA0) +#define bfin_write_CAN_MB30_DATA0(val) bfin_write16(CAN_MB30_DATA0, val) +#define bfin_read_CAN_MB30_DATA1() bfin_read16(CAN_MB30_DATA1) +#define bfin_write_CAN_MB30_DATA1(val) bfin_write16(CAN_MB30_DATA1, val) +#define bfin_read_CAN_MB30_DATA2() bfin_read16(CAN_MB30_DATA2) +#define bfin_write_CAN_MB30_DATA2(val) bfin_write16(CAN_MB30_DATA2, val) +#define bfin_read_CAN_MB30_DATA3() bfin_read16(CAN_MB30_DATA3) +#define bfin_write_CAN_MB30_DATA3(val) bfin_write16(CAN_MB30_DATA3, val) +#define bfin_read_CAN_MB30_LENGTH() bfin_read16(CAN_MB30_LENGTH) +#define bfin_write_CAN_MB30_LENGTH(val) bfin_write16(CAN_MB30_LENGTH, val) +#define bfin_read_CAN_MB30_TIMESTAMP() bfin_read16(CAN_MB30_TIMESTAMP) +#define bfin_write_CAN_MB30_TIMESTAMP(val) bfin_write16(CAN_MB30_TIMESTAMP, val) +#define bfin_read_CAN_MB30_ID0() bfin_read16(CAN_MB30_ID0) +#define bfin_write_CAN_MB30_ID0(val) bfin_write16(CAN_MB30_ID0, val) +#define bfin_read_CAN_MB30_ID1() bfin_read16(CAN_MB30_ID1) +#define bfin_write_CAN_MB30_ID1(val) bfin_write16(CAN_MB30_ID1, val) +#define bfin_read_CAN_MB31_DATA0() bfin_read16(CAN_MB31_DATA0) +#define bfin_write_CAN_MB31_DATA0(val) bfin_write16(CAN_MB31_DATA0, val) +#define bfin_read_CAN_MB31_DATA1() bfin_read16(CAN_MB31_DATA1) +#define bfin_write_CAN_MB31_DATA1(val) bfin_write16(CAN_MB31_DATA1, val) +#define bfin_read_CAN_MB31_DATA2() bfin_read16(CAN_MB31_DATA2) +#define bfin_write_CAN_MB31_DATA2(val) bfin_write16(CAN_MB31_DATA2, val) +#define bfin_read_CAN_MB31_DATA3() bfin_read16(CAN_MB31_DATA3) +#define bfin_write_CAN_MB31_DATA3(val) bfin_write16(CAN_MB31_DATA3, val) +#define bfin_read_CAN_MB31_LENGTH() bfin_read16(CAN_MB31_LENGTH) +#define bfin_write_CAN_MB31_LENGTH(val) bfin_write16(CAN_MB31_LENGTH, val) +#define bfin_read_CAN_MB31_TIMESTAMP() bfin_read16(CAN_MB31_TIMESTAMP) +#define bfin_write_CAN_MB31_TIMESTAMP(val) bfin_write16(CAN_MB31_TIMESTAMP, val) +#define bfin_read_CAN_MB31_ID0() bfin_read16(CAN_MB31_ID0) +#define bfin_write_CAN_MB31_ID0(val) bfin_write16(CAN_MB31_ID0, val) +#define bfin_read_CAN_MB31_ID1() bfin_read16(CAN_MB31_ID1) +#define bfin_write_CAN_MB31_ID1(val) bfin_write16(CAN_MB31_ID1, val) +#define bfin_read_PWM1_CTRL() bfin_read16(PWM1_CTRL) +#define bfin_write_PWM1_CTRL(val) bfin_write16(PWM1_CTRL, val) +#define bfin_read_PWM1_STAT() bfin_read16(PWM1_STAT) +#define bfin_write_PWM1_STAT(val) bfin_write16(PWM1_STAT, val) +#define bfin_read_PWM1_TM() bfin_read16(PWM1_TM) +#define bfin_write_PWM1_TM(val) bfin_write16(PWM1_TM, val) +#define bfin_read_PWM1_DT() bfin_read16(PWM1_DT) +#define bfin_write_PWM1_DT(val) bfin_write16(PWM1_DT, val) +#define bfin_read_PWM1_GATE() bfin_read16(PWM1_GATE) +#define bfin_write_PWM1_GATE(val) bfin_write16(PWM1_GATE, val) +#define bfin_read_PWM1_CHA() bfin_read16(PWM1_CHA) +#define bfin_write_PWM1_CHA(val) bfin_write16(PWM1_CHA, val) +#define bfin_read_PWM1_CHB() bfin_read16(PWM1_CHB) +#define bfin_write_PWM1_CHB(val) bfin_write16(PWM1_CHB, val) +#define bfin_read_PWM1_CHC() bfin_read16(PWM1_CHC) +#define bfin_write_PWM1_CHC(val) bfin_write16(PWM1_CHC, val) +#define bfin_read_PWM1_SEG() bfin_read16(PWM1_SEG) +#define bfin_write_PWM1_SEG(val) bfin_write16(PWM1_SEG, val) +#define bfin_read_PWM1_SYNCWT() bfin_read16(PWM1_SYNCWT) +#define bfin_write_PWM1_SYNCWT(val) bfin_write16(PWM1_SYNCWT, val) +#define bfin_read_PWM1_CHAL() bfin_read16(PWM1_CHAL) +#define bfin_write_PWM1_CHAL(val) bfin_write16(PWM1_CHAL, val) +#define bfin_read_PWM1_CHBL() bfin_read16(PWM1_CHBL) +#define bfin_write_PWM1_CHBL(val) bfin_write16(PWM1_CHBL, val) +#define bfin_read_PWM1_CHCL() bfin_read16(PWM1_CHCL) +#define bfin_write_PWM1_CHCL(val) bfin_write16(PWM1_CHCL, val) +#define bfin_read_PWM1_LSI() bfin_read16(PWM1_LSI) +#define bfin_write_PWM1_LSI(val) bfin_write16(PWM1_LSI, val) +#define bfin_read_PWM1_STAT2() bfin_read16(PWM1_STAT2) +#define bfin_write_PWM1_STAT2(val) bfin_write16(PWM1_STAT2, val) +#define bfin_read_PORTF_FER() bfin_read16(PORTF_FER) +#define bfin_write_PORTF_FER(val) bfin_write16(PORTF_FER, val) +#define bfin_read_PORTG_FER() bfin_read16(PORTG_FER) +#define bfin_write_PORTG_FER(val) bfin_write16(PORTG_FER, val) +#define bfin_read_PORTH_FER() bfin_read16(PORTH_FER) +#define bfin_write_PORTH_FER(val) bfin_write16(PORTH_FER, val) +#define bfin_read_PORTF_MUX() bfin_read16(PORTF_MUX) +#define bfin_write_PORTF_MUX(val) bfin_write16(PORTF_MUX, val) +#define bfin_read_PORTG_MUX() bfin_read16(PORTG_MUX) +#define bfin_write_PORTG_MUX(val) bfin_write16(PORTG_MUX, val) +#define bfin_read_PORTH_MUX() bfin_read16(PORTH_MUX) +#define bfin_write_PORTH_MUX(val) bfin_write16(PORTH_MUX, val) +#define bfin_read_PORTF_DRIVE() bfin_read16(PORTF_DRIVE) +#define bfin_write_PORTF_DRIVE(val) bfin_write16(PORTF_DRIVE, val) +#define bfin_read_PORTG_DRIVE() bfin_read16(PORTG_DRIVE) +#define bfin_write_PORTG_DRIVE(val) bfin_write16(PORTG_DRIVE, val) +#define bfin_read_PORTH_DRIVE() bfin_read16(PORTH_DRIVE) +#define bfin_write_PORTH_DRIVE(val) bfin_write16(PORTH_DRIVE, val) +#define bfin_read_PORTF_HYSTERESIS() bfin_read16(PORTF_HYSTERESIS) +#define bfin_write_PORTF_HYSTERESIS(val) bfin_write16(PORTF_HYSTERESIS, val) +#define bfin_read_PORTG_HYSTERESIS() bfin_read16(PORTG_HYSTERESIS) +#define bfin_write_PORTG_HYSTERESIS(val) bfin_write16(PORTG_HYSTERESIS, val) +#define bfin_read_PORTH_HYSTERESIS() bfin_read16(PORTH_HYSTERESIS) +#define bfin_write_PORTH_HYSTERESIS(val) bfin_write16(PORTH_HYSTERESIS, val) +#define bfin_read_NONGPIO_DRIVE() bfin_read16(NONGPIO_DRIVE) +#define bfin_write_NONGPIO_DRIVE(val) bfin_write16(NONGPIO_DRIVE, val) +#define bfin_read_NONGPIO_HYSTERESIS() bfin_read16(NONGPIO_HYSTERESIS) +#define bfin_write_NONGPIO_HYSTERESIS(val) bfin_write16(NONGPIO_HYSTERESIS, val) +#define bfin_read_FLASH_CONTROL() bfin_read16(FLASH_CONTROL) +#define bfin_write_FLASH_CONTROL(val) bfin_write16(FLASH_CONTROL, val) +#define bfin_read_FLASH_CONTROL_SET() bfin_read16(FLASH_CONTROL_SET) +#define bfin_write_FLASH_CONTROL_SET(val) bfin_write16(FLASH_CONTROL_SET, val) +#define bfin_read_FLASH_CONTROL_CLEAR() bfin_read16(FLASH_CONTROL_CLEAR) +#define bfin_write_FLASH_CONTROL_CLEAR(val) bfin_write16(FLASH_CONTROL_CLEAR, val) +#define bfin_read_CNT1_CONFIG() bfin_read16(CNT1_CONFIG) +#define bfin_write_CNT1_CONFIG(val) bfin_write16(CNT1_CONFIG, val) +#define bfin_read_CNT1_IMASK() bfin_read16(CNT1_IMASK) +#define bfin_write_CNT1_IMASK(val) bfin_write16(CNT1_IMASK, val) +#define bfin_read_CNT1_STATUS() bfin_read16(CNT1_STATUS) +#define bfin_write_CNT1_STATUS(val) bfin_write16(CNT1_STATUS, val) +#define bfin_read_CNT1_COMMAND() bfin_read16(CNT1_COMMAND) +#define bfin_write_CNT1_COMMAND(val) bfin_write16(CNT1_COMMAND, val) +#define bfin_read_CNT1_DEBOUNCE() bfin_read16(CNT1_DEBOUNCE) +#define bfin_write_CNT1_DEBOUNCE(val) bfin_write16(CNT1_DEBOUNCE, val) +#define bfin_read_CNT1_COUNTER() bfin_read32(CNT1_COUNTER) +#define bfin_write_CNT1_COUNTER(val) bfin_write32(CNT1_COUNTER, val) +#define bfin_read_CNT1_MAX() bfin_read32(CNT1_MAX) +#define bfin_write_CNT1_MAX(val) bfin_write32(CNT1_MAX, val) +#define bfin_read_CNT1_MIN() bfin_read32(CNT1_MIN) +#define bfin_write_CNT1_MIN(val) bfin_write32(CNT1_MIN, val) +#define bfin_read_SPI1_CTL() bfin_read16(SPI1_CTL) +#define bfin_write_SPI1_CTL(val) bfin_write16(SPI1_CTL, val) +#define bfin_read_SPI1_FLG() bfin_read16(SPI1_FLG) +#define bfin_write_SPI1_FLG(val) bfin_write16(SPI1_FLG, val) +#define bfin_read_SPI1_STAT() bfin_read16(SPI1_STAT) +#define bfin_write_SPI1_STAT(val) bfin_write16(SPI1_STAT, val) +#define bfin_read_SPI1_TDBR() bfin_read16(SPI1_TDBR) +#define bfin_write_SPI1_TDBR(val) bfin_write16(SPI1_TDBR, val) +#define bfin_read_SPI1_RDBR() bfin_read16(SPI1_RDBR) +#define bfin_write_SPI1_RDBR(val) bfin_write16(SPI1_RDBR, val) +#define bfin_read_SPI1_BAUD() bfin_read16(SPI1_BAUD) +#define bfin_write_SPI1_BAUD(val) bfin_write16(SPI1_BAUD, val) +#define bfin_read_SPI1_SHADOW() bfin_read16(SPI1_SHADOW) +#define bfin_write_SPI1_SHADOW(val) bfin_write16(SPI1_SHADOW, val) +#define bfin_read_CNT0_CONFIG() bfin_read16(CNT0_CONFIG) +#define bfin_write_CNT0_CONFIG(val) bfin_write16(CNT0_CONFIG, val) +#define bfin_read_CNT0_IMASK() bfin_read16(CNT0_IMASK) +#define bfin_write_CNT0_IMASK(val) bfin_write16(CNT0_IMASK, val) +#define bfin_read_CNT0_STATUS() bfin_read16(CNT0_STATUS) +#define bfin_write_CNT0_STATUS(val) bfin_write16(CNT0_STATUS, val) +#define bfin_read_CNT0_COMMAND() bfin_read16(CNT0_COMMAND) +#define bfin_write_CNT0_COMMAND(val) bfin_write16(CNT0_COMMAND, val) +#define bfin_read_CNT0_DEBOUNCE() bfin_read16(CNT0_DEBOUNCE) +#define bfin_write_CNT0_DEBOUNCE(val) bfin_write16(CNT0_DEBOUNCE, val) +#define bfin_read_CNT0_COUNTER() bfin_read32(CNT0_COUNTER) +#define bfin_write_CNT0_COUNTER(val) bfin_write32(CNT0_COUNTER, val) +#define bfin_read_CNT0_MAX() bfin_read32(CNT0_MAX) +#define bfin_write_CNT0_MAX(val) bfin_write32(CNT0_MAX, val) +#define bfin_read_CNT0_MIN() bfin_read32(CNT0_MIN) +#define bfin_write_CNT0_MIN(val) bfin_write32(CNT0_MIN, val) +#define bfin_read_PWM0_CTRL() bfin_read16(PWM0_CTRL) +#define bfin_write_PWM0_CTRL(val) bfin_write16(PWM0_CTRL, val) +#define bfin_read_PWM0_STAT() bfin_read16(PWM0_STAT) +#define bfin_write_PWM0_STAT(val) bfin_write16(PWM0_STAT, val) +#define bfin_read_PWM0_TM() bfin_read16(PWM0_TM) +#define bfin_write_PWM0_TM(val) bfin_write16(PWM0_TM, val) +#define bfin_read_PWM0_DT() bfin_read16(PWM0_DT) +#define bfin_write_PWM0_DT(val) bfin_write16(PWM0_DT, val) +#define bfin_read_PWM0_GATE() bfin_read16(PWM0_GATE) +#define bfin_write_PWM0_GATE(val) bfin_write16(PWM0_GATE, val) +#define bfin_read_PWM0_CHA() bfin_read16(PWM0_CHA) +#define bfin_write_PWM0_CHA(val) bfin_write16(PWM0_CHA, val) +#define bfin_read_PWM0_CHB() bfin_read16(PWM0_CHB) +#define bfin_write_PWM0_CHB(val) bfin_write16(PWM0_CHB, val) +#define bfin_read_PWM0_CHC() bfin_read16(PWM0_CHC) +#define bfin_write_PWM0_CHC(val) bfin_write16(PWM0_CHC, val) +#define bfin_read_PWM0_SEG() bfin_read16(PWM0_SEG) +#define bfin_write_PWM0_SEG(val) bfin_write16(PWM0_SEG, val) +#define bfin_read_PWM0_SYNCWT() bfin_read16(PWM0_SYNCWT) +#define bfin_write_PWM0_SYNCWT(val) bfin_write16(PWM0_SYNCWT, val) +#define bfin_read_PWM0_CHAL() bfin_read16(PWM0_CHAL) +#define bfin_write_PWM0_CHAL(val) bfin_write16(PWM0_CHAL, val) +#define bfin_read_PWM0_CHBL() bfin_read16(PWM0_CHBL) +#define bfin_write_PWM0_CHBL(val) bfin_write16(PWM0_CHBL, val) +#define bfin_read_PWM0_CHCL() bfin_read16(PWM0_CHCL) +#define bfin_write_PWM0_CHCL(val) bfin_write16(PWM0_CHCL, val) +#define bfin_read_PWM0_LSI() bfin_read16(PWM0_LSI) +#define bfin_write_PWM0_LSI(val) bfin_write16(PWM0_LSI, val) +#define bfin_read_PWM0_STAT2() bfin_read16(PWM0_STAT2) +#define bfin_write_PWM0_STAT2(val) bfin_write16(PWM0_STAT2, val) +#define bfin_read_RSI_PWR_CONTROL() bfin_read16(RSI_PWR_CONTROL) +#define bfin_write_RSI_PWR_CONTROL(val) bfin_write16(RSI_PWR_CONTROL, val) +#define bfin_read_RSI_CLK_CONTROL() bfin_read16(RSI_CLK_CONTROL) +#define bfin_write_RSI_CLK_CONTROL(val) bfin_write16(RSI_CLK_CONTROL, val) +#define bfin_read_RSI_ARGUMENT() bfin_read32(RSI_ARGUMENT) +#define bfin_write_RSI_ARGUMENT(val) bfin_write32(RSI_ARGUMENT, val) +#define bfin_read_RSI_COMMAND() bfin_read16(RSI_COMMAND) +#define bfin_write_RSI_COMMAND(val) bfin_write16(RSI_COMMAND, val) +#define bfin_read_RSI_RESP_CMD() bfin_read16(RSI_RESP_CMD) +#define bfin_write_RSI_RESP_CMD(val) bfin_write16(RSI_RESP_CMD, val) +#define bfin_read_RSI_RESPONSE0() bfin_read32(RSI_RESPONSE0) +#define bfin_write_RSI_RESPONSE0(val) bfin_write32(RSI_RESPONSE0, val) +#define bfin_read_RSI_RESPONSE1() bfin_read32(RSI_RESPONSE1) +#define bfin_write_RSI_RESPONSE1(val) bfin_write32(RSI_RESPONSE1, val) +#define bfin_read_RSI_RESPONSE2() bfin_read32(RSI_RESPONSE2) +#define bfin_write_RSI_RESPONSE2(val) bfin_write32(RSI_RESPONSE2, val) +#define bfin_read_RSI_RESPONSE3() bfin_read32(RSI_RESPONSE3) +#define bfin_write_RSI_RESPONSE3(val) bfin_write32(RSI_RESPONSE3, val) +#define bfin_read_RSI_DATA_TIMER() bfin_read32(RSI_DATA_TIMER) +#define bfin_write_RSI_DATA_TIMER(val) bfin_write32(RSI_DATA_TIMER, val) +#define bfin_read_RSI_DATA_LGTH() bfin_read16(RSI_DATA_LGTH) +#define bfin_write_RSI_DATA_LGTH(val) bfin_write16(RSI_DATA_LGTH, val) +#define bfin_read_RSI_DATA_CONTROL() bfin_read16(RSI_DATA_CONTROL) +#define bfin_write_RSI_DATA_CONTROL(val) bfin_write16(RSI_DATA_CONTROL, val) +#define bfin_read_RSI_DATA_CNT() bfin_read16(RSI_DATA_CNT) +#define bfin_write_RSI_DATA_CNT(val) bfin_write16(RSI_DATA_CNT, val) +#define bfin_read_RSI_STATUS() bfin_read32(RSI_STATUS) +#define bfin_write_RSI_STATUS(val) bfin_write32(RSI_STATUS, val) +#define bfin_read_RSI_STATUSCL() bfin_read16(RSI_STATUSCL) +#define bfin_write_RSI_STATUSCL(val) bfin_write16(RSI_STATUSCL, val) +#define bfin_read_RSI_MASK0() bfin_read32(RSI_MASK0) +#define bfin_write_RSI_MASK0(val) bfin_write32(RSI_MASK0, val) +#define bfin_read_RSI_MASK1() bfin_read32(RSI_MASK1) +#define bfin_write_RSI_MASK1(val) bfin_write32(RSI_MASK1, val) +#define bfin_read_RSI_FIFO_CNT() bfin_read16(RSI_FIFO_CNT) +#define bfin_write_RSI_FIFO_CNT(val) bfin_write16(RSI_FIFO_CNT, val) +#define bfin_read_RSI_CEATA_CONTROL() bfin_read16(RSI_CEATA_CONTROL) +#define bfin_write_RSI_CEATA_CONTROL(val) bfin_write16(RSI_CEATA_CONTROL, val) +#define bfin_read_RSI_FIFO() bfin_read32(RSI_FIFO) +#define bfin_write_RSI_FIFO(val) bfin_write32(RSI_FIFO, val) +#define bfin_read_RSI_ESTAT() bfin_read16(RSI_ESTAT) +#define bfin_write_RSI_ESTAT(val) bfin_write16(RSI_ESTAT, val) +#define bfin_read_RSI_EMASK() bfin_read16(RSI_EMASK) +#define bfin_write_RSI_EMASK(val) bfin_write16(RSI_EMASK, val) +#define bfin_read_RSI_CONFIG() bfin_read16(RSI_CONFIG) +#define bfin_write_RSI_CONFIG(val) bfin_write16(RSI_CONFIG, val) +#define bfin_read_RSI_RD_WAIT_EN() bfin_read16(RSI_RD_WAIT_EN) +#define bfin_write_RSI_RD_WAIT_EN(val) bfin_write16(RSI_RD_WAIT_EN, val) +#define bfin_read_RSI_PID0() bfin_read16(RSI_PID0) +#define bfin_write_RSI_PID0(val) bfin_write16(RSI_PID0, val) +#define bfin_read_RSI_PID1() bfin_read16(RSI_PID1) +#define bfin_write_RSI_PID1(val) bfin_write16(RSI_PID1, val) +#define bfin_read_RSI_PID2() bfin_read16(RSI_PID2) +#define bfin_write_RSI_PID2(val) bfin_write16(RSI_PID2, val) +#define bfin_read_RSI_PID3() bfin_read16(RSI_PID3) +#define bfin_write_RSI_PID3(val) bfin_write16(RSI_PID3, val) +#define bfin_read_DMA_TC_CNT() bfin_read16(DMA_TC_CNT) +#define bfin_write_DMA_TC_CNT(val) bfin_write16(DMA_TC_CNT, val) +#define bfin_read_DMA_TC_PER() bfin_read16(DMA_TC_PER) +#define bfin_write_DMA_TC_PER(val) bfin_write16(DMA_TC_PER, val) + +#endif /* __BFIN_CDEF_ADSP_BF504_proc__ */ diff --git a/arch/blackfin/include/asm/mach-bf506/BF504_def.h b/arch/blackfin/include/asm/mach-bf506/BF504_def.h new file mode 100644 index 0000000..8b0345f --- /dev/null +++ b/arch/blackfin/include/asm/mach-bf506/BF504_def.h @@ -0,0 +1,944 @@ +/* DO NOT EDIT THIS FILE + * Automatically generated by generate-def-headers.xsl + * DO NOT EDIT THIS FILE + */ + +#ifndef __BFIN_DEF_ADSP_BF504_proc__ +#define __BFIN_DEF_ADSP_BF504_proc__ + +#include "../mach-common/ADSP-EDN-core_def.h" + +#define PLL_CTL 0xFFC00000 /* PLL Control Register */ +#define PLL_DIV 0xFFC00004 /* PLL Divide Register */ +#define VR_CTL 0xFFC00008 /* Voltage Regulator Control Register */ +#define PLL_STAT 0xFFC0000C /* PLL Status Register */ +#define PLL_LOCKCNT 0xFFC00010 /* PLL Lock Count Register */ +#define CHIPID 0xFFC00014 +#define SWRST 0xFFC00100 /* Software Reset Register */ +#define SYSCR 0xFFC00104 /* System Configuration register */ +#define SIC_RVECT 0xFFC00108 /* Interrupt Reset Vector Address Register */ +#define SIC_IMASK0 0xFFC0010C /* Interrupt Mask Register */ +#define SIC_IAR0 0xFFC00110 /* Interrupt Assignment Register 0 */ +#define SIC_IAR1 0xFFC00114 /* Interrupt Assignment Register 1 */ +#define SIC_IAR2 0xFFC00118 /* Interrupt Assignment Register 2 */ +#define SIC_IAR3 0xFFC0011C /* Interrupt Assignment Register 3 */ +#define SIC_ISR0 0xFFC00120 /* Interrupt Status Register */ +#define SIC_IWR0 0xFFC00124 /* Interrupt Wakeup Register */ +#define SIC_IMASK1 0xFFC0014C /* Interrupt Mask register of SIC2 */ +#define SIC_IAR4 0xFFC00150 /* Interrupt Assignment register4 */ +#define SIC_IAR5 0xFFC00154 /* Interrupt Assignment register5 */ +#define SIC_IAR6 0xFFC00158 /* Interrupt Assignment register6 */ +#define SIC_IAR7 0xFFC0015C /* Interrupt Assignment register7 */ +#define SIC_ISR1 0xFFC00160 /* Interrupt Status register */ +#define SIC_IWR1 0xFFC00164 /* Interrupt Wakeup register */ +#define WDOG_CTL 0xFFC00200 /* Watchdog Control Register */ +#define WDOG_CNT 0xFFC00204 /* Watchdog Count Register */ +#define WDOG_STAT 0xFFC00208 /* Watchdog Status Register */ +#define UART0_DLL 0xFFC00400 /* Divisor Latch Low Byte */ +#define UART0_DLH 0xFFC00404 /* Divisor Latch High Byte */ +#define UART0_GCTL 0xFFC00408 /* Global Control Register */ +#define UART0_LCR 0xFFC0040C /* Line Control Register */ +#define UART0_MCR 0xFFC00410 /* Modem Control Register */ +#define UART0_LSR 0xFFC00414 /* Line Status Register */ +#define UART0_MSR 0xFFC00418 /* Modem Status Register */ +#define UART0_SCR 0xFFC0041C /* Scratch Register */ +#define UART0_IER_SET 0xFFC00420 /* Interrupt Enable Register Set */ +#define UART0_IER_CLEAR 0xFFC00424 /* Interrupt Enable Register Clear */ +#define UART0_THR 0xFFC00428 /* Transmit Hold Register */ +#define UART0_RBR 0xFFC0042C /* Receive Buffer Register */ +#define SPI0_CTL 0xFFC00500 /* SPI0 Control Register */ +#define SPI0_FLG 0xFFC00504 /* SPI0 Flag register */ +#define SPI0_STAT 0xFFC00508 /* SPI0 Status register */ +#define SPI0_TDBR 0xFFC0050C /* SPI0 Transmit Data Buffer Register */ +#define SPI0_RDBR 0xFFC00510 /* SPI0 Receive Data Buffer Register */ +#define SPI0_BAUD 0xFFC00514 /* SPI0 Baud rate Register */ +#define SPI0_SHADOW 0xFFC00518 /* SPI0_RDBR Shadow Register */ +#define TIMER0_CONFIG 0xFFC00600 /* Timer 0 Configuration Register */ +#define TIMER0_COUNTER 0xFFC00604 /* Timer 0 Counter Register */ +#define TIMER0_PERIOD 0xFFC00608 /* Timer 0 Period Register */ +#define TIMER0_WIDTH 0xFFC0060C /* Timer 0 Width Register */ +#define TIMER1_CONFIG 0xFFC00610 /* Timer 1 Configuration Register */ +#define TIMER1_COUNTER 0xFFC00614 /* Timer 1 Counter Register */ +#define TIMER1_PERIOD 0xFFC00618 /* Timer 1 Period Register */ +#define TIMER1_WIDTH 0xFFC0061C /* Timer 1 Width Register */ +#define TIMER2_CONFIG 0xFFC00620 /* Timer 2 Configuration Register */ +#define TIMER2_COUNTER 0xFFC00624 /* Timer 2 Counter Register */ +#define TIMER2_PERIOD 0xFFC00628 /* Timer 2 Period Register */ +#define TIMER2_WIDTH 0xFFC0062C /* Timer 2 Width Register */ +#define TIMER3_CONFIG 0xFFC00630 /* Timer 3 Configuration Register */ +#define TIMER3_COUNTER 0xFFC00634 /* Timer 3 Counter Register */ +#define TIMER3_PERIOD 0xFFC00638 /* Timer 3 Period Register */ +#define TIMER3_WIDTH 0xFFC0063C /* Timer 3 Width Register */ +#define TIMER4_CONFIG 0xFFC00640 /* Timer 4 Configuration Register */ +#define TIMER4_COUNTER 0xFFC00644 /* Timer 4 Counter Register */ +#define TIMER4_PERIOD 0xFFC00648 /* Timer 4 Period Register */ +#define TIMER4_WIDTH 0xFFC0064C /* Timer 4 Width Register */ +#define TIMER5_CONFIG 0xFFC00650 /* Timer 5 Configuration Register */ +#define TIMER5_COUNTER 0xFFC00654 /* Timer 5 Counter Register */ +#define TIMER5_PERIOD 0xFFC00658 /* Timer 5 Period Register */ +#define TIMER5_WIDTH 0xFFC0065C /* Timer 5 Width Register */ +#define TIMER6_CONFIG 0xFFC00660 /* Timer 6 Configuration Register */ +#define TIMER6_COUNTER 0xFFC00664 /* Timer 6 Counter Register */ +#define TIMER6_PERIOD 0xFFC00668 /* Timer 6 Period Register */ +#define TIMER6_WIDTH 0xFFC0066C /* Timer 6 Width Register\n */ +#define TIMER7_CONFIG 0xFFC00670 /* Timer 7 Configuration Register */ +#define TIMER7_COUNTER 0xFFC00674 /* Timer 7 Counter Register */ +#define TIMER7_PERIOD 0xFFC00678 /* Timer 7 Period Register */ +#define TIMER7_WIDTH 0xFFC0067C /* Timer 7 Width Register */ +#define TIMER_ENABLE 0xFFC00680 /* Timer Enable Register */ +#define TIMER_DISABLE 0xFFC00684 /* Timer Disable Register */ +#define TIMER_STATUS 0xFFC00688 /* Timer Status Register */ +#define PORTFIO 0xFFC00700 /* Port F I/O Pin State Specify Register */ +#define PORTFIO_CLEAR 0xFFC00704 /* Port F I/O Peripheral Interrupt Clear Register */ +#define PORTFIO_SET 0xFFC00708 /* Port F I/O Peripheral Interrupt Set Register */ +#define PORTFIO_TOGGLE 0xFFC0070C /* Port F I/O Pin State Toggle Register */ +#define PORTFIO_MASKA 0xFFC00710 /* Port F I/O Mask State Specify Interrupt A Register */ +#define PORTFIO_MASKA_CLEAR 0xFFC00714 /* Port F I/O Mask Disable Interrupt A Register */ +#define PORTFIO_MASKA_SET 0xFFC00718 /* Port F I/O Mask Enable Interrupt A Register */ +#define PORTFIO_MASKA_TOGGLE 0xFFC0071C /* Port F I/O Mask Toggle Enable Interrupt A Register */ +#define PORTFIO_MASKB 0xFFC00720 /* Port F I/O Mask State Specify Interrupt B Register */ +#define PORTFIO_MASKB_CLEAR 0xFFC00724 /* Port F I/O Mask Disable Interrupt B Register */ +#define PORTFIO_MASKB_SET 0xFFC00728 /* Port F I/O Mask Enable Interrupt B Register */ +#define PORTFIO_MASKB_TOGGLE 0xFFC0072C /* Port F I/O Mask Toggle Enable Interrupt B Register */ +#define PORTFIO_DIR 0xFFC00730 /* Port F I/O Direction Register */ +#define PORTFIO_POLAR 0xFFC00734 /* Port F I/O Source Polarity Register */ +#define PORTFIO_EDGE 0xFFC00738 /* Port F I/O Source Sensitivity Register */ +#define PORTFIO_BOTH 0xFFC0073C /* Port F I/O Set on BOTH Edges Register */ +#define PORTFIO_INEN 0xFFC00740 /* Port F I/O Input Enable Register */ +#define SPORT0_TCR1 0xFFC00800 /* SPORT0 Transmit Configuration 1 Register */ +#define SPORT0_TCR2 0xFFC00804 /* SPORT0 Transmit Configuration 2 Register */ +#define SPORT0_TCLKDIV 0xFFC00808 /* SPORT0 Transmit Clock Divider */ +#define SPORT0_TFSDIV 0xFFC0080C /* SPORT0 Transmit Frame Sync Divider */ +#define SPORT0_TX 0xFFC00810 /* SPORT0 TX Data Register */ +#define SPORT0_RX 0xFFC00818 /* SPORT0 RX Data Register */ +#define SPORT0_RCR1 0xFFC00820 /* SPORT0 Transmit Configuration 1 Register */ +#define SPORT0_RCR2 0xFFC00824 /* SPORT0 Transmit Configuration 2 Register */ +#define SPORT0_RCLKDIV 0xFFC00828 /* SPORT0 Receive Clock Divider */ +#define SPORT0_RFSDIV 0xFFC0082C /* SPORT0 Receive Frame Sync Divider */ +#define SPORT0_STAT 0xFFC00830 /* SPORT0 Status Register */ +#define SPORT0_CHNL 0xFFC00834 /* SPORT0 Current Channel Register */ +#define SPORT0_MCMC1 0xFFC00838 /* SPORT0 Multi-Channel Configuration Register 1 */ +#define SPORT0_MCMC2 0xFFC0083C /* SPORT0 Multi-Channel Configuration Register 2 */ +#define SPORT0_MTCS0 0xFFC00840 /* SPORT0 Multi-Channel Transmit Select Register 0 */ +#define SPORT0_MTCS1 0xFFC00844 /* SPORT0 Multi-Channel Transmit Select Register 1 */ +#define SPORT0_MTCS2 0xFFC00848 /* SPORT0 Multi-Channel Transmit Select Register 2 */ +#define SPORT0_MTCS3 0xFFC0084C /* SPORT0 Multi-Channel Transmit Select Register 3 */ +#define SPORT0_MRCS0 0xFFC00850 /* SPORT0 Multi-Channel Receive Select Register 0 */ +#define SPORT0_MRCS1 0xFFC00854 /* SPORT0 Multi-Channel Receive Select Register 1 */ +#define SPORT0_MRCS2 0xFFC00858 /* SPORT0 Multi-Channel Receive Select Register 2 */ +#define SPORT0_MRCS3 0xFFC0085C /* SPORT0 Multi-Channel Receive Select Register 3 */ +#define SPORT1_TCR1 0xFFC00900 /* SPORT1 Transmit Configuration 1 Register */ +#define SPORT1_TCR2 0xFFC00904 /* SPORT1 Transmit Configuration 2 Register */ +#define SPORT1_TCLKDIV 0xFFC00908 /* SPORT1 Transmit Clock Divider */ +#define SPORT1_TFSDIV 0xFFC0090C /* SPORT1 Transmit Frame Sync Divider */ +#define SPORT1_TX 0xFFC00910 /* SPORT1 TX Data Register */ +#define SPORT1_RX 0xFFC00918 /* SPORT1 RX Data Register */ +#define SPORT1_RCR1 0xFFC00920 /* SPORT1 Transmit Configuration 1 Register */ +#define SPORT1_RCR2 0xFFC00924 /* SPORT1 Transmit Configuration 2 Register */ +#define SPORT1_RCLKDIV 0xFFC00928 /* SPORT1 Receive Clock Divider */ +#define SPORT1_RFSDIV 0xFFC0092C /* SPORT1 Receive Frame Sync Divider */ +#define SPORT1_STAT 0xFFC00930 /* SPORT1 Status Register */ +#define SPORT1_CHNL 0xFFC00934 /* SPORT1 Current Channel Register */ +#define SPORT1_MCMC1 0xFFC00938 /* SPORT1 Multi-Channel Configuration Register 1 */ +#define SPORT1_MCMC2 0xFFC0093C /* SPORT1 Multi-Channel Configuration Register 2 */ +#define SPORT1_MTCS0 0xFFC00940 /* SPORT1 Multi-Channel Transmit Select Register 0 */ +#define SPORT1_MTCS1 0xFFC00944 /* SPORT1 Multi-Channel Transmit Select Register 1 */ +#define SPORT1_MTCS2 0xFFC00948 /* SPORT1 Multi-Channel Transmit Select Register 2 */ +#define SPORT1_MTCS3 0xFFC0094C /* SPORT1 Multi-Channel Transmit Select Register 3 */ +#define SPORT1_MRCS0 0xFFC00950 /* SPORT1 Multi-Channel Receive Select Register 0 */ +#define SPORT1_MRCS1 0xFFC00954 /* SPORT1 Multi-Channel Receive Select Register 1 */ +#define SPORT1_MRCS2 0xFFC00958 /* SPORT1 Multi-Channel Receive Select Register 2 */ +#define SPORT1_MRCS3 0xFFC0095C /* SPORT1 Multi-Channel Receive Select Register 3 */ +#define EBIU_AMGCTL 0xFFC00A00 /* Asynchronous Memory Global Control Register */ +#define EBIU_AMBCTL0 0xFFC00A04 /* Asynchronous Memory Bank Control Register 0 */ +#define EBIU_AMBCTL1 0xFFC00A08 /* Asynchronous Memory Bank Control Register 1 */ +#define EBIU_MODE 0xFFC00A20 /* Asynchronous Memory Mode Control Register */ +#define EBIU_FCTL 0xFFC00A24 /* Asynchronous Memory Parameter Control Register */ +#define DMA0_NEXT_DESC_PTR 0xFFC00C00 /* DMA Channel 0 Next Descriptor Pointer Register */ +#define DMA0_START_ADDR 0xFFC00C04 /* DMA Channel 0 Start Address Register */ +#define DMA0_CONFIG 0xFFC00C08 /* DMA Channel 0 Configuration Register */ +#define DMA0_X_COUNT 0xFFC00C10 /* DMA Channel 0 X Count Register */ +#define DMA0_X_MODIFY 0xFFC00C14 /* DMA Channel 0 X Modify Register */ +#define DMA0_Y_COUNT 0xFFC00C18 /* DMA Channel 0 Y Count Register */ +#define DMA0_Y_MODIFY 0xFFC00C1C /* DMA Channel 0 Y Modify Register */ +#define DMA0_CURR_DESC_PTR 0xFFC00C20 /* DMA Channel 0 Current Descriptor Pointer Register */ +#define DMA0_CURR_ADDR 0xFFC00C24 /* DMA Channel 0 Current Address Register */ +#define DMA0_IRQ_STATUS 0xFFC00C28 /* DMA Channel 0 Interrupt/Status Register */ +#define DMA0_PERIPHERAL_MAP 0xFFC00C2C /* DMA Channel 0 Peripheral Map Register */ +#define DMA0_CURR_X_COUNT 0xFFC00C30 /* DMA Channel 0 Current X Count Register */ +#define DMA0_CURR_Y_COUNT 0xFFC00C38 /* DMA Channel 0 Current Y Count Register */ +#define DMA1_NEXT_DESC_PTR 0xFFC00C40 /* DMA Channel 1 Next Descriptor Pointer Register */ +#define DMA1_START_ADDR 0xFFC00C44 /* DMA Channel 1 Start Address Register */ +#define DMA1_CONFIG 0xFFC00C48 /* DMA Channel 1 Configuration Register */ +#define DMA1_X_COUNT 0xFFC00C50 /* DMA Channel 1 X Count Register */ +#define DMA1_X_MODIFY 0xFFC00C54 /* DMA Channel 1 X Modify Register */ +#define DMA1_Y_COUNT 0xFFC00C58 /* DMA Channel 1 Y Count Register */ +#define DMA1_Y_MODIFY 0xFFC00C5C /* DMA Channel 1 Y Modify Register */ +#define DMA1_CURR_DESC_PTR 0xFFC00C60 /* DMA Channel 1 Current Descriptor Pointer Register */ +#define DMA1_CURR_ADDR 0xFFC00C64 /* DMA Channel 1 Current Address Register */ +#define DMA1_IRQ_STATUS 0xFFC00C68 /* DMA Channel 1 Interrupt/Status Register */ +#define DMA1_PERIPHERAL_MAP 0xFFC00C6C /* DMA Channel 1 Peripheral Map Register */ +#define DMA1_CURR_X_COUNT 0xFFC00C70 /* DMA Channel 1 Current X Count Register */ +#define DMA1_CURR_Y_COUNT 0xFFC00C78 /* DMA Channel 1 Current Y Count Register */ +#define DMA2_NEXT_DESC_PTR 0xFFC00C80 /* DMA Channel 2 Next Descriptor Pointer Register */ +#define DMA2_START_ADDR 0xFFC00C84 /* DMA Channel 2 Start Address Register */ +#define DMA2_CONFIG 0xFFC00C88 /* DMA Channel 2 Configuration Register */ +#define DMA2_X_COUNT 0xFFC00C90 /* DMA Channel 2 X Count Register */ +#define DMA2_X_MODIFY 0xFFC00C94 /* DMA Channel 2 X Modify Register */ +#define DMA2_Y_COUNT 0xFFC00C98 /* DMA Channel 2 Y Count Register */ +#define DMA2_Y_MODIFY 0xFFC00C9C /* DMA Channel 2 Y Modify Register */ +#define DMA2_CURR_DESC_PTR 0xFFC00CA0 /* DMA Channel 2 Current Descriptor Pointer Register */ +#define DMA2_CURR_ADDR 0xFFC00CA4 /* DMA Channel 2 Current Address Register */ +#define DMA2_IRQ_STATUS 0xFFC00CA8 /* DMA Channel 2 Interrupt/Status Register */ +#define DMA2_PERIPHERAL_MAP 0xFFC00CAC /* DMA Channel 2 Peripheral Map Register */ +#define DMA2_CURR_X_COUNT 0xFFC00CB0 /* DMA Channel 2 Current X Count Register */ +#define DMA2_CURR_Y_COUNT 0xFFC00CB8 /* DMA Channel 2 Current Y Count Register */ +#define DMA3_NEXT_DESC_PTR 0xFFC00CC0 /* DMA Channel 3 Next Descriptor Pointer Register */ +#define DMA3_START_ADDR 0xFFC00CC4 /* DMA Channel 3 Start Address Register */ +#define DMA3_CONFIG 0xFFC00CC8 /* DMA Channel 3 Configuration Register */ +#define DMA3_X_COUNT 0xFFC00CD0 /* DMA Channel 3 X Count Register */ +#define DMA3_X_MODIFY 0xFFC00CD4 /* DMA Channel 3 X Modify Register */ +#define DMA3_Y_COUNT 0xFFC00CD8 /* DMA Channel 3 Y Count Register */ +#define DMA3_Y_MODIFY 0xFFC00CDC /* DMA Channel 3 Y Modify Register */ +#define DMA3_CURR_DESC_PTR 0xFFC00CE0 /* DMA Channel 3 Current Descriptor Pointer Register */ +#define DMA3_CURR_ADDR 0xFFC00CE4 /* DMA Channel 3 Current Address Register */ +#define DMA3_IRQ_STATUS 0xFFC00CE8 /* DMA Channel 3 Interrupt/Status Register */ +#define DMA3_PERIPHERAL_MAP 0xFFC00CEC /* DMA Channel 3 Peripheral Map Register */ +#define DMA3_CURR_X_COUNT 0xFFC00CF0 /* DMA Channel 3 Current X Count Register */ +#define DMA3_CURR_Y_COUNT 0xFFC00CF8 /* DMA Channel 3 Current Y Count Register */ +#define DMA4_NEXT_DESC_PTR 0xFFC00D00 /* DMA Channel 4 Next Descriptor Pointer Register */ +#define DMA4_START_ADDR 0xFFC00D04 /* DMA Channel 4 Start Address Register */ +#define DMA4_CONFIG 0xFFC00D08 /* DMA Channel 4 Configuration Register */ +#define DMA4_X_COUNT 0xFFC00D10 /* DMA Channel 4 X Count Register */ +#define DMA4_X_MODIFY 0xFFC00D14 /* DMA Channel 4 X Modify Register */ +#define DMA4_Y_COUNT 0xFFC00D18 /* DMA Channel 4 Y Count Register */ +#define DMA4_Y_MODIFY 0xFFC00D1C /* DMA Channel 4 Y Modify Register */ +#define DMA4_CURR_DESC_PTR 0xFFC00D20 /* DMA Channel 4 Current Descriptor Pointer Register */ +#define DMA4_CURR_ADDR 0xFFC00D24 /* DMA Channel 4 Current Address Register */ +#define DMA4_IRQ_STATUS 0xFFC00D28 /* DMA Channel 4 Interrupt/Status Register */ +#define DMA4_PERIPHERAL_MAP 0xFFC00D2C /* DMA Channel 4 Peripheral Map Register */ +#define DMA4_CURR_X_COUNT 0xFFC00D30 /* DMA Channel 4 Current X Count Register */ +#define DMA4_CURR_Y_COUNT 0xFFC00D38 /* DMA Channel 4 Current Y Count Register */ +#define DMA5_NEXT_DESC_PTR 0xFFC00D40 /* DMA Channel 5 Next Descriptor Pointer Register */ +#define DMA5_START_ADDR 0xFFC00D44 /* DMA Channel 5 Start Address Register */ +#define DMA5_CONFIG 0xFFC00D48 /* DMA Channel 5 Configuration Register */ +#define DMA5_X_COUNT 0xFFC00D50 /* DMA Channel 5 X Count Register */ +#define DMA5_X_MODIFY 0xFFC00D54 /* DMA Channel 5 X Modify Register */ +#define DMA5_Y_COUNT 0xFFC00D58 /* DMA Channel 5 Y Count Register */ +#define DMA5_Y_MODIFY 0xFFC00D5C /* DMA Channel 5 Y Modify Register */ +#define DMA5_CURR_DESC_PTR 0xFFC00D60 /* DMA Channel 5 Current Descriptor Pointer Register */ +#define DMA5_CURR_ADDR 0xFFC00D64 /* DMA Channel 5 Current Address Register */ +#define DMA5_IRQ_STATUS 0xFFC00D68 /* DMA Channel 5 Interrupt/Status Register */ +#define DMA5_PERIPHERAL_MAP 0xFFC00D6C /* DMA Channel 5 Peripheral Map Register */ +#define DMA5_CURR_X_COUNT 0xFFC00D70 /* DMA Channel 5 Current X Count Register */ +#define DMA5_CURR_Y_COUNT 0xFFC00D78 /* DMA Channel 5 Current Y Count Register */ +#define DMA6_NEXT_DESC_PTR 0xFFC00D80 /* DMA Channel 6 Next Descriptor Pointer Register */ +#define DMA6_START_ADDR 0xFFC00D84 /* DMA Channel 6 Start Address Register */ +#define DMA6_CONFIG 0xFFC00D88 /* DMA Channel 6 Configuration Register */ +#define DMA6_X_COUNT 0xFFC00D90 /* DMA Channel 6 X Count Register */ +#define DMA6_X_MODIFY 0xFFC00D94 /* DMA Channel 6 X Modify Register */ +#define DMA6_Y_COUNT 0xFFC00D98 /* DMA Channel 6 Y Count Register */ +#define DMA6_Y_MODIFY 0xFFC00D9C /* DMA Channel 6 Y Modify Register */ +#define DMA6_CURR_DESC_PTR 0xFFC00DA0 /* DMA Channel 6 Current Descriptor Pointer Register */ +#define DMA6_CURR_ADDR 0xFFC00DA4 /* DMA Channel 6 Current Address Register */ +#define DMA6_IRQ_STATUS 0xFFC00DA8 /* DMA Channel 6 Interrupt/Status Register */ +#define DMA6_PERIPHERAL_MAP 0xFFC00DAC /* DMA Channel 6 Peripheral Map Register */ +#define DMA6_CURR_X_COUNT 0xFFC00DB0 /* DMA Channel 6 Current X Count Register */ +#define DMA6_CURR_Y_COUNT 0xFFC00DB8 /* DMA Channel 6 Current Y Count Register */ +#define DMA7_NEXT_DESC_PTR 0xFFC00DC0 /* DMA Channel 7 Next Descriptor Pointer Register */ +#define DMA7_START_ADDR 0xFFC00DC4 /* DMA Channel 7 Start Address Register */ +#define DMA7_CONFIG 0xFFC00DC8 /* DMA Channel 7 Configuration Register */ +#define DMA7_X_COUNT 0xFFC00DD0 /* DMA Channel 7 X Count Register */ +#define DMA7_X_MODIFY 0xFFC00DD4 /* DMA Channel 7 X Modify Register */ +#define DMA7_Y_COUNT 0xFFC00DD8 /* DMA Channel 7 Y Count Register */ +#define DMA7_Y_MODIFY 0xFFC00DDC /* DMA Channel 7 Y Modify Register */ +#define DMA7_CURR_DESC_PTR 0xFFC00DE0 /* DMA Channel 7 Current Descriptor Pointer Register */ +#define DMA7_CURR_ADDR 0xFFC00DE4 /* DMA Channel 7 Current Address Register */ +#define DMA7_IRQ_STATUS 0xFFC00DE8 /* DMA Channel 7 Interrupt/Status Register */ +#define DMA7_PERIPHERAL_MAP 0xFFC00DEC /* DMA Channel 7 Peripheral Map Register */ +#define DMA7_CURR_X_COUNT 0xFFC00DF0 /* DMA Channel 7 Current X Count Register */ +#define DMA7_CURR_Y_COUNT 0xFFC00DF8 /* DMA Channel 7 Current Y Count Register */ +#define DMA8_NEXT_DESC_PTR 0xFFC00E00 /* DMA Channel 8 Next Descriptor Pointer Register */ +#define DMA8_START_ADDR 0xFFC00E04 /* DMA Channel 8 Start Address Register */ +#define DMA8_CONFIG 0xFFC00E08 /* DMA Channel 8 Configuration Register */ +#define DMA8_X_COUNT 0xFFC00E10 /* DMA Channel 8 X Count Register */ +#define DMA8_X_MODIFY 0xFFC00E14 /* DMA Channel 8 X Modify Register */ +#define DMA8_Y_COUNT 0xFFC00E18 /* DMA Channel 8 Y Count Register */ +#define DMA8_Y_MODIFY 0xFFC00E1C /* DMA Channel 8 Y Modify Register */ +#define DMA8_CURR_DESC_PTR 0xFFC00E20 /* DMA Channel 8 Current Descriptor Pointer Register */ +#define DMA8_CURR_ADDR 0xFFC00E24 /* DMA Channel 8 Current Address Register */ +#define DMA8_IRQ_STATUS 0xFFC00E28 /* DMA Channel 8 Interrupt/Status Register */ +#define DMA8_PERIPHERAL_MAP 0xFFC00E2C /* DMA Channel 8 Peripheral Map Register */ +#define DMA8_CURR_X_COUNT 0xFFC00E30 /* DMA Channel 8 Current X Count Register */ +#define DMA8_CURR_Y_COUNT 0xFFC00E38 /* DMA Channel 8 Current Y Count Register */ +#define DMA9_NEXT_DESC_PTR 0xFFC00E40 /* DMA Channel 9 Next Descriptor Pointer Register */ +#define DMA9_START_ADDR 0xFFC00E44 /* DMA Channel 9 Start Address Register */ +#define DMA9_CONFIG 0xFFC00E48 /* DMA Channel 9 Configuration Register */ +#define DMA9_X_COUNT 0xFFC00E50 /* DMA Channel 9 X Count Register */ +#define DMA9_X_MODIFY 0xFFC00E54 /* DMA Channel 9 X Modify Register */ +#define DMA9_Y_COUNT 0xFFC00E58 /* DMA Channel 9 Y Count Register */ +#define DMA9_Y_MODIFY 0xFFC00E5C /* DMA Channel 9 Y Modify Register */ +#define DMA9_CURR_DESC_PTR 0xFFC00E60 /* DMA Channel 9 Current Descriptor Pointer Register */ +#define DMA9_CURR_ADDR 0xFFC00E64 /* DMA Channel 9 Current Address Register */ +#define DMA9_IRQ_STATUS 0xFFC00E68 /* DMA Channel 9 Interrupt/Status Register */ +#define DMA9_PERIPHERAL_MAP 0xFFC00E6C /* DMA Channel 9 Peripheral Map Register */ +#define DMA9_CURR_X_COUNT 0xFFC00E70 /* DMA Channel 9 Current X Count Register */ +#define DMA9_CURR_Y_COUNT 0xFFC00E78 /* DMA Channel 9 Current Y Count Register */ +#define DMA10_NEXT_DESC_PTR 0xFFC00E80 /* DMA Channel 10 Next Descriptor Pointer Register */ +#define DMA10_START_ADDR 0xFFC00E84 /* DMA Channel 10 Start Address Register */ +#define DMA10_CONFIG 0xFFC00E88 /* DMA Channel 10 Configuration Register */ +#define DMA10_X_COUNT 0xFFC00E90 /* DMA Channel 10 X Count Register */ +#define DMA10_X_MODIFY 0xFFC00E94 /* DMA Channel 10 X Modify Register */ +#define DMA10_Y_COUNT 0xFFC00E98 /* DMA Channel 10 Y Count Register */ +#define DMA10_Y_MODIFY 0xFFC00E9C /* DMA Channel 10 Y Modify Register */ +#define DMA10_CURR_DESC_PTR 0xFFC00EA0 /* DMA Channel 10 Current Descriptor Pointer Register */ +#define DMA10_CURR_ADDR 0xFFC00EA4 /* DMA Channel 10 Current Address Register */ +#define DMA10_IRQ_STATUS 0xFFC00EA8 /* DMA Channel 10 Interrupt/Status Register */ +#define DMA10_PERIPHERAL_MAP 0xFFC00EAC /* DMA Channel 10 Peripheral Map Register */ +#define DMA10_CURR_X_COUNT 0xFFC00EB0 /* DMA Channel 10 Current X Count Register */ +#define DMA10_CURR_Y_COUNT 0xFFC00EB8 /* DMA Channel 10 Current Y Count Register */ +#define DMA11_NEXT_DESC_PTR 0xFFC00EC0 /* DMA Channel 11 Next Descriptor Pointer Register */ +#define DMA11_START_ADDR 0xFFC00EC4 /* DMA Channel 11 Start Address Register */ +#define DMA11_CONFIG 0xFFC00EC8 /* DMA Channel 11 Configuration Register */ +#define DMA11_X_COUNT 0xFFC00ED0 /* DMA Channel 11 X Count Register */ +#define DMA11_X_MODIFY 0xFFC00ED4 /* DMA Channel 11 X Modify Register */ +#define DMA11_Y_COUNT 0xFFC00ED8 /* DMA Channel 11 Y Count Register */ +#define DMA11_Y_MODIFY 0xFFC00EDC /* DMA Channel 11 Y Modify Register */ +#define DMA11_CURR_DESC_PTR 0xFFC00EE0 /* DMA Channel 11 Current Descriptor Pointer Register */ +#define DMA11_CURR_ADDR 0xFFC00EE4 /* DMA Channel 11 Current Address Register */ +#define DMA11_IRQ_STATUS 0xFFC00EE8 /* DMA Channel 11 Interrupt/Status Register */ +#define DMA11_PERIPHERAL_MAP 0xFFC00EEC /* DMA Channel 11 Peripheral Map Register */ +#define DMA11_CURR_X_COUNT 0xFFC00EF0 /* DMA Channel 11 Current X Count Register */ +#define DMA11_CURR_Y_COUNT 0xFFC00EF8 /* DMA Channel 11 Current Y Count Register */ +#define MDMA_S0_NEXT_DESC_PTR 0xFFC00F40 /* MemDMA Stream 0 Source Next Descriptor Pointer Register */ +#define MDMA_S0_START_ADDR 0xFFC00F44 /* MemDMA Stream 0 Source Start Address Register */ +#define MDMA_S0_CONFIG 0xFFC00F48 /* MemDMA Stream 0 Source Configuration Register */ +#define MDMA_S0_X_COUNT 0xFFC00F50 /* MemDMA Stream 0 Source X Count Register */ +#define MDMA_S0_X_MODIFY 0xFFC00F54 /* MemDMA Stream 0 Source X Modify Register */ +#define MDMA_S0_Y_COUNT 0xFFC00F58 /* MemDMA Stream 0 Source Y Count Register */ +#define MDMA_S0_Y_MODIFY 0xFFC00F5C /* MemDMA Stream 0 Source Y Modify Register */ +#define MDMA_S0_CURR_DESC_PTR 0xFFC00F60 /* MemDMA Stream 0 Source Current Descriptor Pointer Register */ +#define MDMA_S0_CURR_ADDR 0xFFC00F64 /* MemDMA Stream 0 Source Current Address Register */ +#define MDMA_S0_IRQ_STATUS 0xFFC00F68 /* MemDMA Stream 0 Source Interrupt/Status Register */ +#define MDMA_S0_PERIPHERAL_MAP 0xFFC00F6C /* MemDMA Stream 0 Source Peripheral Map Register */ +#define MDMA_S0_CURR_X_COUNT 0xFFC00F70 /* MemDMA Stream 0 Source Current X Count Register */ +#define MDMA_S0_CURR_Y_COUNT 0xFFC00F78 /* MemDMA Stream 0 Source Current Y Count Register */ +#define MDMA_D0_NEXT_DESC_PTR 0xFFC00F00 /* MemDMA Stream 0 Destination Next Descriptor Pointer Register */ +#define MDMA_D0_START_ADDR 0xFFC00F04 /* MemDMA Stream 0 Destination Start Address Register */ +#define MDMA_D0_CONFIG 0xFFC00F08 /* MemDMA Stream 0 Destination Configuration Register */ +#define MDMA_D0_X_COUNT 0xFFC00F10 /* MemDMA Stream 0 Destination X Count Register */ +#define MDMA_D0_X_MODIFY 0xFFC00F14 /* MemDMA Stream 0 Destination X Modify Register */ +#define MDMA_D0_Y_COUNT 0xFFC00F18 /* MemDMA Stream 0 Destination Y Count Register */ +#define MDMA_D0_Y_MODIFY 0xFFC00F1C /* MemDMA Stream 0 Destination Y Modify Register */ +#define MDMA_D0_CURR_DESC_PTR 0xFFC00F20 /* MemDMA Stream 0 Destination Current Descriptor Pointer Register */ +#define MDMA_D0_CURR_ADDR 0xFFC00F24 /* MemDMA Stream 0 Destination Current Address Register */ +#define MDMA_D0_IRQ_STATUS 0xFFC00F28 /* MemDMA Stream 0 Destination Interrupt/Status Register */ +#define MDMA_D0_PERIPHERAL_MAP 0xFFC00F2C /* MemDMA Stream 0 Destination Peripheral Map Register */ +#define MDMA_D0_CURR_X_COUNT 0xFFC00F30 /* MemDMA Stream 0 Destination Current X Count Register */ +#define MDMA_D0_CURR_Y_COUNT 0xFFC00F38 /* MemDMA Stream 0 Destination Current Y Count Register */ +#define MDMA_S1_NEXT_DESC_PTR 0xFFC00FC0 /* MemDMA Stream 1 Source Next Descriptor Pointer Register */ +#define MDMA_S1_START_ADDR 0xFFC00FC4 /* MemDMA Stream 1 Source Start Address Register */ +#define MDMA_S1_CONFIG 0xFFC00FC8 /* MemDMA Stream 1 Source Configuration Register */ +#define MDMA_S1_X_COUNT 0xFFC00FD0 /* MemDMA Stream 1 Source X Count Register */ +#define MDMA_S1_X_MODIFY 0xFFC00FD4 /* MemDMA Stream 1 Source X Modify Register */ +#define MDMA_S1_Y_COUNT 0xFFC00FD8 /* MemDMA Stream 1 Source Y Count Register */ +#define MDMA_S1_Y_MODIFY 0xFFC00FDC /* MemDMA Stream 1 Source Y Modify Register */ +#define MDMA_S1_CURR_DESC_PTR 0xFFC00FE0 /* MemDMA Stream 1 Source Current Descriptor Pointer Register */ +#define MDMA_S1_CURR_ADDR 0xFFC00FE4 /* MemDMA Stream 1 Source Current Address Register */ +#define MDMA_S1_IRQ_STATUS 0xFFC00FE8 /* MemDMA Stream 1 Source Interrupt/Status Register */ +#define MDMA_S1_PERIPHERAL_MAP 0xFFC00FEC /* MemDMA Stream 1 Source Peripheral Map Register */ +#define MDMA_S1_CURR_X_COUNT 0xFFC00FF0 /* MemDMA Stream 1 Source Current X Count Register */ +#define MDMA_S1_CURR_Y_COUNT 0xFFC00FF8 /* MemDMA Stream 1 Source Current Y Count Register */ +#define MDMA_D1_NEXT_DESC_PTR 0xFFC00F80 /* MemDMA Stream 1 Destination Next Descriptor Pointer Register */ +#define MDMA_D1_START_ADDR 0xFFC00F84 /* MemDMA Stream 1 Destination Start Address Register */ +#define MDMA_D1_CONFIG 0xFFC00F88 /* MemDMA Stream 1 Destination Configuration Register */ +#define MDMA_D1_X_COUNT 0xFFC00F90 /* MemDMA Stream 1 Destination X Count Register */ +#define MDMA_D1_X_MODIFY 0xFFC00F94 /* MemDMA Stream 1 Destination X Modify Register */ +#define MDMA_D1_Y_COUNT 0xFFC00F98 /* MemDMA Stream 1 Destination Y Count Register */ +#define MDMA_D1_Y_MODIFY 0xFFC00F9C /* MemDMA Stream 1 Destination Y Modify Register */ +#define MDMA_D1_CURR_DESC_PTR 0xFFC00FA0 /* MemDMA Stream 1 Destination Current Descriptor Pointer Register */ +#define MDMA_D1_CURR_ADDR 0xFFC00FA4 /* MemDMA Stream 1 Destination Current Address Register */ +#define MDMA_D1_IRQ_STATUS 0xFFC00FA8 /* MemDMA Stream 1 Destination Interrupt/Status Register */ +#define MDMA_D1_PERIPHERAL_MAP 0xFFC00FAC /* MemDMA Stream 1 Destination Peripheral Map Register */ +#define MDMA_D1_CURR_X_COUNT 0xFFC00FB0 /* MemDMA Stream 1 Destination Current X Count Register */ +#define MDMA_D1_CURR_Y_COUNT 0xFFC00FB8 /* MemDMA Stream 1 Destination Current Y Count Register */ +#define PPI_CONTROL 0xFFC01000 /* PPI Control Register */ +#define PPI_STATUS 0xFFC01004 /* PPI Status Register */ +#define PPI_COUNT 0xFFC01008 /* PPI Transfer Count Register */ +#define PPI_DELAY 0xFFC0100C /* PPI Delay Count Register */ +#define PPI_FRAME 0xFFC01010 /* PPI Frame Length Register */ +#define TWI_CLKDIV 0xFFC01400 /* Serial Clock Divider Register */ +#define TWI_CONTROL 0xFFC01404 /* TWI Control Register */ +#define TWI_SLAVE_CTL 0xFFC01408 /* Slave Mode Control Register */ +#define TWI_SLAVE_STAT 0xFFC0140C /* Slave Mode Status Register */ +#define TWI_SLAVE_ADDR 0xFFC01410 /* Slave Mode Address Register */ +#define TWI_MASTER_CTL 0xFFC01414 /* Master Mode Control Register */ +#define TWI_MASTER_STAT 0xFFC01418 /* Master Mode Status Register */ +#define TWI_MASTER_ADDR 0xFFC0141C /* Master Mode Address Register */ +#define TWI_INT_STAT 0xFFC01420 /* TWI Interrupt Status Register */ +#define TWI_INT_MASK 0xFFC01424 /* TWI Master Interrupt Mask Register */ +#define TWI_FIFO_CTL 0xFFC01428 /* FIFO Control Register */ +#define TWI_FIFO_STAT 0xFFC0142C /* FIFO Status Register */ +#define TWI_XMT_DATA8 0xFFC01480 /* FIFO Transmit Data Single Byte Register */ +#define TWI_XMT_DATA16 0xFFC01484 /* FIFO Transmit Data Double Byte Register */ +#define TWI_RCV_DATA8 0xFFC01488 /* FIFO Receive Data Single Byte Register */ +#define TWI_RCV_DATA16 0xFFC0148C /* FIFO Receive Data Double Byte Register */ +#define PORTGIO 0xFFC01500 /* Port G I/O Pin State Specify Register */ +#define PORTGIO_CLEAR 0xFFC01504 /* Port G I/O Peripheral Interrupt Clear Register */ +#define PORTGIO_SET 0xFFC01508 /* Port G I/O Peripheral Interrupt Set Register */ +#define PORTGIO_TOGGLE 0xFFC0150C /* Port G I/O Pin State Toggle Register */ +#define PORTGIO_MASKA 0xFFC01510 /* Port G I/O Mask State Specify Interrupt A Register */ +#define PORTGIO_MASKA_CLEAR 0xFFC01514 /* Port G I/O Mask Disable Interrupt A Register */ +#define PORTGIO_MASKA_SET 0xFFC01518 /* Port G I/O Mask Enable Interrupt A Register */ +#define PORTGIO_MASKA_TOGGLE 0xFFC0151C /* Port G I/O Mask Toggle Enable Interrupt A Register */ +#define PORTGIO_MASKB 0xFFC01520 /* Port G I/O Mask State Specify Interrupt B Register */ +#define PORTGIO_MASKB_CLEAR 0xFFC01524 /* Port G I/O Mask Disable Interrupt B Register */ +#define PORTGIO_MASKB_SET 0xFFC01528 /* Port G I/O Mask Enable Interrupt B Register */ +#define PORTGIO_MASKB_TOGGLE 0xFFC0152C /* Port G I/O Mask Toggle Enable Interrupt B Register */ +#define PORTGIO_DIR 0xFFC01530 /* Port G I/O Direction Register */ +#define PORTGIO_POLAR 0xFFC01534 /* Port G I/O Source Polarity Register */ +#define PORTGIO_EDGE 0xFFC01538 /* Port G I/O Source Sensitivity Register */ +#define PORTGIO_BOTH 0xFFC0153C /* Port G I/O Set on BOTH Edges Register */ +#define PORTGIO_INEN 0xFFC01540 /* Port G I/O Input Enable Register */ +#define PORTHIO 0xFFC01700 /* Port H I/O Pin State Specify Register */ +#define PORTHIO_CLEAR 0xFFC01704 /* Port H I/O Peripheral Interrupt Clear Register */ +#define PORTHIO_SET 0xFFC01708 /* Port H I/O Peripheral Interrupt Set Register */ +#define PORTHIO_TOGGLE 0xFFC0170C /* Port H I/O Pin State Toggle Register */ +#define PORTHIO_MASKA 0xFFC01710 /* Port H I/O Mask State Specify Interrupt A Register */ +#define PORTHIO_MASKA_CLEAR 0xFFC01714 /* Port H I/O Mask Disable Interrupt A Register */ +#define PORTHIO_MASKA_SET 0xFFC01718 /* Port H I/O Mask Enable Interrupt A Register */ +#define PORTHIO_MASKA_TOGGLE 0xFFC0171C /* Port H I/O Mask Toggle Enable Interrupt A Register */ +#define PORTHIO_MASKB 0xFFC01720 /* Port H I/O Mask State Specify Interrupt B Register */ +#define PORTHIO_MASKB_CLEAR 0xFFC01724 /* Port H I/O Mask Disable Interrupt B Register */ +#define PORTHIO_MASKB_SET 0xFFC01728 /* Port H I/O Mask Enable Interrupt B Register */ +#define PORTHIO_MASKB_TOGGLE 0xFFC0172C /* Port H I/O Mask Toggle Enable Interrupt B Register */ +#define PORTHIO_DIR 0xFFC01730 /* Port H I/O Direction Register */ +#define PORTHIO_POLAR 0xFFC01734 /* Port H I/O Source Polarity Register */ +#define PORTHIO_EDGE 0xFFC01738 /* Port H I/O Source Sensitivity Register */ +#define PORTHIO_BOTH 0xFFC0173C /* Port H I/O Set on BOTH Edges Register */ +#define PORTHIO_INEN 0xFFC01740 /* Port H I/O Input Enable Register */ +#define UART1_DLL 0xFFC02000 /* Divisor Latch Low Byte */ +#define UART1_DLH 0xFFC02004 /* Divisor Latch High Byte */ +#define UART1_GCTL 0xFFC02008 /* Global Control Register */ +#define UART1_LCR 0xFFC0200C /* Line Control Register */ +#define UART1_MCR 0xFFC02010 /* Modem Control Register */ +#define UART1_LSR 0xFFC02014 /* Line Status Register */ +#define UART1_MSR 0xFFC02018 /* Modem Status Register */ +#define UART1_SCR 0xFFC0201C /* Scratch Register */ +#define UART1_IER_SET 0xFFC02020 /* Interrupt Enable Register Set */ +#define UART1_IER_CLEAR 0xFFC02024 /* Interrupt Enable Register Clear */ +#define UART1_THR 0xFFC02028 /* Transmit Hold Register */ +#define UART1_RBR 0xFFC0202C /* Receive Buffer Register */ +#define CAN_MC1 0xFFC02A00 /* CAN Controller 0 Mailbox Configuration Register 1 */ +#define CAN_MD1 0xFFC02A04 /* CAN Controller 0 Mailbox Direction Register 1 */ +#define CAN_TRS1 0xFFC02A08 /* CAN Controller 0 Transmit Request Set Register 1 */ +#define CAN_TRR1 0xFFC02A0C /* CAN Controller 0 Transmit Request Reset Register 1 */ +#define CAN_TA1 0xFFC02A10 /* CAN Controller 0 Transmit Acknowledge Register 1 */ +#define CAN_AA1 0xFFC02A14 /* CAN Controller 0 Abort Acknowledge Register 1 */ +#define CAN_RMP1 0xFFC02A18 /* CAN Controller 0 Receive Message Pending Register 1 */ +#define CAN_RML1 0xFFC02A1C /* CAN Controller 0 Receive Message Lost Register 1 */ +#define CAN_MBTIF1 0xFFC02A20 /* CAN Controller 0 Mailbox Transmit Interrupt Flag Register 1 */ +#define CAN_MBRIF1 0xFFC02A24 /* CAN Controller 0 Mailbox Receive Interrupt Flag Register 1 */ +#define CAN_MBIM1 0xFFC02A28 /* CAN Controller 0 Mailbox Interrupt Mask Register 1 */ +#define CAN_RFH1 0xFFC02A2C /* CAN Controller 0 Remote Frame Handling Enable Register 1 */ +#define CAN_OPSS1 0xFFC02A30 /* CAN Controller 0 Overwrite Protection Single Shot Transmit Register 1 */ +#define CAN_MC2 0xFFC02A40 /* CAN Controller 0 Mailbox Configuration Register 2 */ +#define CAN_MD2 0xFFC02A44 /* CAN Controller 0 Mailbox Direction Register 2 */ +#define CAN_TRS2 0xFFC02A48 /* CAN Controller 0 Transmit Request Set Register 2 */ +#define CAN_TRR2 0xFFC02A4C /* CAN Controller 0 Transmit Request Reset Register 2 */ +#define CAN_TA2 0xFFC02A50 /* CAN Controller 0 Transmit Acknowledge Register 2 */ +#define CAN_AA2 0xFFC02A54 /* CAN Controller 0 Abort Acknowledge Register 2 */ +#define CAN_RMP2 0xFFC02A58 /* CAN Controller 0 Receive Message Pending Register 2 */ +#define CAN_RML2 0xFFC02A5C /* CAN Controller 0 Receive Message Lost Register 2 */ +#define CAN_MBTIF2 0xFFC02A60 /* CAN Controller 0 Mailbox Transmit Interrupt Flag Register 2 */ +#define CAN_MBRIF2 0xFFC02A64 /* CAN Controller 0 Mailbox Receive Interrupt Flag Register 2 */ +#define CAN_MBIM2 0xFFC02A68 /* CAN Controller 0 Mailbox Interrupt Mask Register 2 */ +#define CAN_RFH2 0xFFC02A6C /* CAN Controller 0 Remote Frame Handling Enable Register 2 */ +#define CAN_OPSS2 0xFFC02A70 /* CAN Controller 0 Overwrite Protection Single Shot Transmit Register 2 */ +#define CAN_CLOCK 0xFFC02A80 /* CAN Controller 0 Clock Register */ +#define CAN_TIMING 0xFFC02A84 /* CAN Controller 0 Timing Register */ +#define CAN_DEBUG 0xFFC02A88 /* CAN Controller 0 Debug Register */ +#define CAN_STATUS 0xFFC02A8C /* CAN Controller 0 Global Status Register */ +#define CAN_CEC 0xFFC02A90 /* CAN Controller 0 Error Counter Register */ +#define CAN_GIS 0xFFC02A94 /* CAN Controller 0 Global Interrupt Status Register */ +#define CAN_GIM 0xFFC02A98 /* CAN Controller 0 Global Interrupt Mask Register */ +#define CAN_GIF 0xFFC02A9C /* CAN Controller 0 Global Interrupt Flag Register */ +#define CAN_CONTROL 0xFFC02AA0 /* CAN Controller 0 Master Control Register */ +#define CAN_INTR 0xFFC02AA4 /* CAN Controller 0 Interrupt Pending Register */ +#define CAN_MBTD 0xFFC02AAC /* CAN Controller 0 Mailbox Temporary Disable Register */ +#define CAN_EWR 0xFFC02AB0 /* CAN Controller 0 Programmable Warning Level Register */ +#define CAN_ESR 0xFFC02AB4 /* CAN Controller 0 Error Status Register */ +#define CAN_UCCNT 0xFFC02AC4 /* CAN Controller 0 Universal Counter Register */ +#define CAN_UCRC 0xFFC02AC8 /* CAN Controller 0 Universal Counter Force Reload Register */ +#define CAN_UCCNF 0xFFC02ACC /* CAN Controller 0 Universal Counter Configuration Register */ +#define CAN_AM00L 0xFFC02B00 /* CAN Controller 0 Mailbox 0 Acceptance Mask High Register */ +#define CAN_AM00H 0xFFC02B04 /* CAN Controller 0 Mailbox 0 Acceptance Mask Low Register */ +#define CAN_AM01L 0xFFC02B08 /* CAN Controller 0 Mailbox 1 Acceptance Mask High Register */ +#define CAN_AM01H 0xFFC02B0C /* CAN Controller 0 Mailbox 1 Acceptance Mask Low Register */ +#define CAN_AM02L 0xFFC02B10 /* CAN Controller 0 Mailbox 2 Acceptance Mask High Register */ +#define CAN_AM02H 0xFFC02B14 /* CAN Controller 0 Mailbox 2 Acceptance Mask Low Register */ +#define CAN_AM03L 0xFFC02B18 /* CAN Controller 0 Mailbox 3 Acceptance Mask High Register */ +#define CAN_AM03H 0xFFC02B1C /* CAN Controller 0 Mailbox 3 Acceptance Mask Low Register */ +#define CAN_AM04L 0xFFC02B20 /* CAN Controller 0 Mailbox 4 Acceptance Mask High Register */ +#define CAN_AM04H 0xFFC02B24 /* CAN Controller 0 Mailbox 4 Acceptance Mask Low Register */ +#define CAN_AM05L 0xFFC02B28 /* CAN Controller 0 Mailbox 5 Acceptance Mask High Register */ +#define CAN_AM05H 0xFFC02B2C /* CAN Controller 0 Mailbox 5 Acceptance Mask Low Register */ +#define CAN_AM06L 0xFFC02B30 /* CAN Controller 0 Mailbox 6 Acceptance Mask High Register */ +#define CAN_AM06H 0xFFC02B34 /* CAN Controller 0 Mailbox 6 Acceptance Mask Low Register */ +#define CAN_AM07L 0xFFC02B38 /* CAN Controller 0 Mailbox 7 Acceptance Mask High Register */ +#define CAN_AM07H 0xFFC02B3C /* CAN Controller 0 Mailbox 7 Acceptance Mask Low Register */ +#define CAN_AM08L 0xFFC02B40 /* CAN Controller 0 Mailbox 8 Acceptance Mask High Register */ +#define CAN_AM08H 0xFFC02B44 /* CAN Controller 0 Mailbox 8 Acceptance Mask Low Register */ +#define CAN_AM09L 0xFFC02B48 /* CAN Controller 0 Mailbox 9 Acceptance Mask High Register */ +#define CAN_AM09H 0xFFC02B4C /* CAN Controller 0 Mailbox 9 Acceptance Mask Low Register */ +#define CAN_AM10L 0xFFC02B50 /* CAN Controller 0 Mailbox 10 Acceptance Mask High Register */ +#define CAN_AM10H 0xFFC02B54 /* CAN Controller 0 Mailbox 10 Acceptance Mask Low Register */ +#define CAN_AM11L 0xFFC02B58 /* CAN Controller 0 Mailbox 11 Acceptance Mask High Register */ +#define CAN_AM11H 0xFFC02B5C /* CAN Controller 0 Mailbox 11 Acceptance Mask Low Register */ +#define CAN_AM12L 0xFFC02B60 /* CAN Controller 0 Mailbox 12 Acceptance Mask High Register */ +#define CAN_AM12H 0xFFC02B64 /* CAN Controller 0 Mailbox 12 Acceptance Mask Low Register */ +#define CAN_AM13L 0xFFC02B68 /* CAN Controller 0 Mailbox 13 Acceptance Mask High Register */ +#define CAN_AM13H 0xFFC02B6C /* CAN Controller 0 Mailbox 13 Acceptance Mask Low Register */ +#define CAN_AM14L 0xFFC02B70 /* CAN Controller 0 Mailbox 14 Acceptance Mask High Register */ +#define CAN_AM14H 0xFFC02B74 /* CAN Controller 0 Mailbox 14 Acceptance Mask Low Register */ +#define CAN_AM15L 0xFFC02B78 /* CAN Controller 0 Mailbox 15 Acceptance Mask High Register */ +#define CAN_AM15H 0xFFC02B7C /* CAN Controller 0 Mailbox 15 Acceptance Mask Low Register */ +#define CAN_AM16L 0xFFC02B80 /* CAN Controller 0 Mailbox 16 Acceptance Mask High Register */ +#define CAN_AM16H 0xFFC02B84 /* CAN Controller 0 Mailbox 16 Acceptance Mask Low Register */ +#define CAN_AM17L 0xFFC02B88 /* CAN Controller 0 Mailbox 17 Acceptance Mask High Register */ +#define CAN_AM17H 0xFFC02B8C /* CAN Controller 0 Mailbox 17 Acceptance Mask Low Register */ +#define CAN_AM18L 0xFFC02B90 /* CAN Controller 0 Mailbox 18 Acceptance Mask High Register */ +#define CAN_AM18H 0xFFC02B94 /* CAN Controller 0 Mailbox 18 Acceptance Mask Low Register */ +#define CAN_AM19L 0xFFC02B98 /* CAN Controller 0 Mailbox 19 Acceptance Mask High Register */ +#define CAN_AM19H 0xFFC02B9C /* CAN Controller 0 Mailbox 19 Acceptance Mask Low Register */ +#define CAN_AM20L 0xFFC02BA0 /* CAN Controller 0 Mailbox 20 Acceptance Mask High Register */ +#define CAN_AM20H 0xFFC02BA4 /* CAN Controller 0 Mailbox 20 Acceptance Mask Low Register */ +#define CAN_AM21L 0xFFC02BA8 /* CAN Controller 0 Mailbox 21 Acceptance Mask High Register */ +#define CAN_AM21H 0xFFC02BAC /* CAN Controller 0 Mailbox 21 Acceptance Mask Low Register */ +#define CAN_AM22L 0xFFC02BB0 /* CAN Controller 0 Mailbox 22 Acceptance Mask High Register */ +#define CAN_AM22H 0xFFC02BB4 /* CAN Controller 0 Mailbox 22 Acceptance Mask Low Register */ +#define CAN_AM23L 0xFFC02BB8 /* CAN Controller 0 Mailbox 23 Acceptance Mask High Register */ +#define CAN_AM23H 0xFFC02BBC /* CAN Controller 0 Mailbox 23 Acceptance Mask Low Register */ +#define CAN_AM24L 0xFFC02BC0 /* CAN Controller 0 Mailbox 24 Acceptance Mask High Register */ +#define CAN_AM24H 0xFFC02BC4 /* CAN Controller 0 Mailbox 24 Acceptance Mask Low Register */ +#define CAN_AM25L 0xFFC02BC8 /* CAN Controller 0 Mailbox 25 Acceptance Mask High Register */ +#define CAN_AM25H 0xFFC02BCC /* CAN Controller 0 Mailbox 25 Acceptance Mask Low Register */ +#define CAN_AM26L 0xFFC02BD0 /* CAN Controller 0 Mailbox 26 Acceptance Mask High Register */ +#define CAN_AM26H 0xFFC02BD4 /* CAN Controller 0 Mailbox 26 Acceptance Mask Low Register */ +#define CAN_AM27L 0xFFC02BD8 /* CAN Controller 0 Mailbox 27 Acceptance Mask High Register */ +#define CAN_AM27H 0xFFC02BDC /* CAN Controller 0 Mailbox 27 Acceptance Mask Low Register */ +#define CAN_AM28L 0xFFC02BE0 /* CAN Controller 0 Mailbox 28 Acceptance Mask High Register */ +#define CAN_AM28H 0xFFC02BE4 /* CAN Controller 0 Mailbox 28 Acceptance Mask Low Register */ +#define CAN_AM29L 0xFFC02BE8 /* CAN Controller 0 Mailbox 29 Acceptance Mask High Register */ +#define CAN_AM29H 0xFFC02BEC /* CAN Controller 0 Mailbox 29 Acceptance Mask Low Register */ +#define CAN_AM30L 0xFFC02BF0 /* CAN Controller 0 Mailbox 30 Acceptance Mask High Register */ +#define CAN_AM30H 0xFFC02BF4 /* CAN Controller 0 Mailbox 30 Acceptance Mask Low Register */ +#define CAN_AM31L 0xFFC02BF8 /* CAN Controller 0 Mailbox 31 Acceptance Mask High Register */ +#define CAN_AM31H 0xFFC02BFC /* CAN Controller 0 Mailbox 31 Acceptance Mask Low Register */ +#define CAN_MB00_DATA0 0xFFC02C00 /* CAN Controller 0 Mailbox 0 Data 0 Register */ +#define CAN_MB00_DATA1 0xFFC02C04 /* CAN Controller 0 Mailbox 0 Data 1 Register */ +#define CAN_MB00_DATA2 0xFFC02C08 /* CAN Controller 0 Mailbox 0 Data 2 Register */ +#define CAN_MB00_DATA3 0xFFC02C0C /* CAN Controller 0 Mailbox 0 Data 3 Register */ +#define CAN_MB00_LENGTH 0xFFC02C10 /* CAN Controller 0 Mailbox 0 Length Register */ +#define CAN_MB00_TIMESTAMP 0xFFC02C14 /* CAN Controller 0 Mailbox 0 Timestamp Register */ +#define CAN_MB00_ID0 0xFFC02C18 /* CAN Controller 0 Mailbox 0 ID0 Register */ +#define CAN_MB00_ID1 0xFFC02C1C /* CAN Controller 0 Mailbox 0 ID1 Register */ +#define CAN_MB01_DATA0 0xFFC02C20 /* CAN Controller 0 Mailbox 1 Data 0 Register */ +#define CAN_MB01_DATA1 0xFFC02C24 /* CAN Controller 0 Mailbox 1 Data 1 Register */ +#define CAN_MB01_DATA2 0xFFC02C28 /* CAN Controller 0 Mailbox 1 Data 2 Register */ +#define CAN_MB01_DATA3 0xFFC02C2C /* CAN Controller 0 Mailbox 1 Data 3 Register */ +#define CAN_MB01_LENGTH 0xFFC02C30 /* CAN Controller 0 Mailbox 1 Length Register */ +#define CAN_MB01_TIMESTAMP 0xFFC02C34 /* CAN Controller 0 Mailbox 1 Timestamp Register */ +#define CAN_MB01_ID0 0xFFC02C38 /* CAN Controller 0 Mailbox 1 ID0 Register */ +#define CAN_MB01_ID1 0xFFC02C3C /* CAN Controller 0 Mailbox 1 ID1 Register */ +#define CAN_MB02_DATA0 0xFFC02C40 /* CAN Controller 0 Mailbox 2 Data 0 Register */ +#define CAN_MB02_DATA1 0xFFC02C44 /* CAN Controller 0 Mailbox 2 Data 1 Register */ +#define CAN_MB02_DATA2 0xFFC02C48 /* CAN Controller 0 Mailbox 2 Data 2 Register */ +#define CAN_MB02_DATA3 0xFFC02C4C /* CAN Controller 0 Mailbox 2 Data 3 Register */ +#define CAN_MB02_LENGTH 0xFFC02C50 /* CAN Controller 0 Mailbox 2 Length Register */ +#define CAN_MB02_TIMESTAMP 0xFFC02C54 /* CAN Controller 0 Mailbox 2 Timestamp Register */ +#define CAN_MB02_ID0 0xFFC02C58 /* CAN Controller 0 Mailbox 2 ID0 Register */ +#define CAN_MB02_ID1 0xFFC02C5C /* CAN Controller 0 Mailbox 2 ID1 Register */ +#define CAN_MB03_DATA0 0xFFC02C60 /* CAN Controller 0 Mailbox 3 Data 0 Register */ +#define CAN_MB03_DATA1 0xFFC02C64 /* CAN Controller 0 Mailbox 3 Data 1 Register */ +#define CAN_MB03_DATA2 0xFFC02C68 /* CAN Controller 0 Mailbox 3 Data 2 Register */ +#define CAN_MB03_DATA3 0xFFC02C6C /* CAN Controller 0 Mailbox 3 Data 3 Register */ +#define CAN_MB03_LENGTH 0xFFC02C70 /* CAN Controller 0 Mailbox 3 Length Register */ +#define CAN_MB03_TIMESTAMP 0xFFC02C74 /* CAN Controller 0 Mailbox 3 Timestamp Register */ +#define CAN_MB03_ID0 0xFFC02C78 /* CAN Controller 0 Mailbox 3 ID0 Register */ +#define CAN_MB03_ID1 0xFFC02C7C /* CAN Controller 0 Mailbox 3 ID1 Register */ +#define CAN_MB04_DATA0 0xFFC02C80 /* CAN Controller 0 Mailbox 4 Data 0 Register */ +#define CAN_MB04_DATA1 0xFFC02C84 /* CAN Controller 0 Mailbox 4 Data 1 Register */ +#define CAN_MB04_DATA2 0xFFC02C88 /* CAN Controller 0 Mailbox 4 Data 2 Register */ +#define CAN_MB04_DATA3 0xFFC02C8C /* CAN Controller 0 Mailbox 4 Data 3 Register */ +#define CAN_MB04_LENGTH 0xFFC02C90 /* CAN Controller 0 Mailbox 4 Length Register */ +#define CAN_MB04_TIMESTAMP 0xFFC02C94 /* CAN Controller 0 Mailbox 4 Timestamp Register */ +#define CAN_MB04_ID0 0xFFC02C98 /* CAN Controller 0 Mailbox 4 ID0 Register */ +#define CAN_MB04_ID1 0xFFC02C9C /* CAN Controller 0 Mailbox 4 ID1 Register */ +#define CAN_MB05_DATA0 0xFFC02CA0 /* CAN Controller 0 Mailbox 5 Data 0 Register */ +#define CAN_MB05_DATA1 0xFFC02CA4 /* CAN Controller 0 Mailbox 5 Data 1 Register */ +#define CAN_MB05_DATA2 0xFFC02CA8 /* CAN Controller 0 Mailbox 5 Data 2 Register */ +#define CAN_MB05_DATA3 0xFFC02CAC /* CAN Controller 0 Mailbox 5 Data 3 Register */ +#define CAN_MB05_LENGTH 0xFFC02CB0 /* CAN Controller 0 Mailbox 5 Length Register */ +#define CAN_MB05_TIMESTAMP 0xFFC02CB4 /* CAN Controller 0 Mailbox 5 Timestamp Register */ +#define CAN_MB05_ID0 0xFFC02CB8 /* CAN Controller 0 Mailbox 5 ID0 Register */ +#define CAN_MB05_ID1 0xFFC02CBC /* CAN Controller 0 Mailbox 5 ID1 Register */ +#define CAN_MB06_DATA0 0xFFC02CC0 /* CAN Controller 0 Mailbox 6 Data 0 Register */ +#define CAN_MB06_DATA1 0xFFC02CC4 /* CAN Controller 0 Mailbox 6 Data 1 Register */ +#define CAN_MB06_DATA2 0xFFC02CC8 /* CAN Controller 0 Mailbox 6 Data 2 Register */ +#define CAN_MB06_DATA3 0xFFC02CCC /* CAN Controller 0 Mailbox 6 Data 3 Register */ +#define CAN_MB06_LENGTH 0xFFC02CD0 /* CAN Controller 0 Mailbox 6 Length Register */ +#define CAN_MB06_TIMESTAMP 0xFFC02CD4 /* CAN Controller 0 Mailbox 6 Timestamp Register */ +#define CAN_MB06_ID0 0xFFC02CD8 /* CAN Controller 0 Mailbox 6 ID0 Register */ +#define CAN_MB06_ID1 0xFFC02CDC /* CAN Controller 0 Mailbox 6 ID1 Register */ +#define CAN_MB07_DATA0 0xFFC02CE0 /* CAN Controller 0 Mailbox 7 Data 0 Register */ +#define CAN_MB07_DATA1 0xFFC02CE4 /* CAN Controller 0 Mailbox 7 Data 1 Register */ +#define CAN_MB07_DATA2 0xFFC02CE8 /* CAN Controller 0 Mailbox 7 Data 2 Register */ +#define CAN_MB07_DATA3 0xFFC02CEC /* CAN Controller 0 Mailbox 7 Data 3 Register */ +#define CAN_MB07_LENGTH 0xFFC02CF0 /* CAN Controller 0 Mailbox 7 Length Register */ +#define CAN_MB07_TIMESTAMP 0xFFC02CF4 /* CAN Controller 0 Mailbox 7 Timestamp Register */ +#define CAN_MB07_ID0 0xFFC02CF8 /* CAN Controller 0 Mailbox 7 ID0 Register */ +#define CAN_MB07_ID1 0xFFC02CFC /* CAN Controller 0 Mailbox 7 ID1 Register */ +#define CAN_MB08_DATA0 0xFFC02D00 /* CAN Controller 0 Mailbox 8 Data 0 Register */ +#define CAN_MB08_DATA1 0xFFC02D04 /* CAN Controller 0 Mailbox 8 Data 1 Register */ +#define CAN_MB08_DATA2 0xFFC02D08 /* CAN Controller 0 Mailbox 8 Data 2 Register */ +#define CAN_MB08_DATA3 0xFFC02D0C /* CAN Controller 0 Mailbox 8 Data 3 Register */ +#define CAN_MB08_LENGTH 0xFFC02D10 /* CAN Controller 0 Mailbox 8 Length Register */ +#define CAN_MB08_TIMESTAMP 0xFFC02D14 /* CAN Controller 0 Mailbox 8 Timestamp Register */ +#define CAN_MB08_ID0 0xFFC02D18 /* CAN Controller 0 Mailbox 8 ID0 Register */ +#define CAN_MB08_ID1 0xFFC02D1C /* CAN Controller 0 Mailbox 8 ID1 Register */ +#define CAN_MB09_DATA0 0xFFC02D20 /* CAN Controller 0 Mailbox 9 Data 0 Register */ +#define CAN_MB09_DATA1 0xFFC02D24 /* CAN Controller 0 Mailbox 9 Data 1 Register */ +#define CAN_MB09_DATA2 0xFFC02D28 /* CAN Controller 0 Mailbox 9 Data 2 Register */ +#define CAN_MB09_DATA3 0xFFC02D2C /* CAN Controller 0 Mailbox 9 Data 3 Register */ +#define CAN_MB09_LENGTH 0xFFC02D30 /* CAN Controller 0 Mailbox 9 Length Register */ +#define CAN_MB09_TIMESTAMP 0xFFC02D34 /* CAN Controller 0 Mailbox 9 Timestamp Register */ +#define CAN_MB09_ID0 0xFFC02D38 /* CAN Controller 0 Mailbox 9 ID0 Register */ +#define CAN_MB09_ID1 0xFFC02D3C /* CAN Controller 0 Mailbox 9 ID1 Register */ +#define CAN_MB10_DATA0 0xFFC02D40 /* CAN Controller 0 Mailbox 10 Data 0 Register */ +#define CAN_MB10_DATA1 0xFFC02D44 /* CAN Controller 0 Mailbox 10 Data 1 Register */ +#define CAN_MB10_DATA2 0xFFC02D48 /* CAN Controller 0 Mailbox 10 Data 2 Register */ +#define CAN_MB10_DATA3 0xFFC02D4C /* CAN Controller 0 Mailbox 10 Data 3 Register */ +#define CAN_MB10_LENGTH 0xFFC02D50 /* CAN Controller 0 Mailbox 10 Length Register */ +#define CAN_MB10_TIMESTAMP 0xFFC02D54 /* CAN Controller 0 Mailbox 10 Timestamp Register */ +#define CAN_MB10_ID0 0xFFC02D58 /* CAN Controller 0 Mailbox 10 ID0 Register */ +#define CAN_MB10_ID1 0xFFC02D5C /* CAN Controller 0 Mailbox 10 ID1 Register */ +#define CAN_MB11_DATA0 0xFFC02D60 /* CAN Controller 0 Mailbox 11 Data 0 Register */ +#define CAN_MB11_DATA1 0xFFC02D64 /* CAN Controller 0 Mailbox 11 Data 1 Register */ +#define CAN_MB11_DATA2 0xFFC02D68 /* CAN Controller 0 Mailbox 11 Data 2 Register */ +#define CAN_MB11_DATA3 0xFFC02D6C /* CAN Controller 0 Mailbox 11 Data 3 Register */ +#define CAN_MB11_LENGTH 0xFFC02D70 /* CAN Controller 0 Mailbox 11 Length Register */ +#define CAN_MB11_TIMESTAMP 0xFFC02D74 /* CAN Controller 0 Mailbox 11 Timestamp Register */ +#define CAN_MB11_ID0 0xFFC02D78 /* CAN Controller 0 Mailbox 11 ID0 Register */ +#define CAN_MB11_ID1 0xFFC02D7C /* CAN Controller 0 Mailbox 11 ID1 Register */ +#define CAN_MB12_DATA0 0xFFC02D80 /* CAN Controller 0 Mailbox 12 Data 0 Register */ +#define CAN_MB12_DATA1 0xFFC02D84 /* CAN Controller 0 Mailbox 12 Data 1 Register */ +#define CAN_MB12_DATA2 0xFFC02D88 /* CAN Controller 0 Mailbox 12 Data 2 Register */ +#define CAN_MB12_DATA3 0xFFC02D8C /* CAN Controller 0 Mailbox 12 Data 3 Register */ +#define CAN_MB12_LENGTH 0xFFC02D90 /* CAN Controller 0 Mailbox 12 Length Register */ +#define CAN_MB12_TIMESTAMP 0xFFC02D94 /* CAN Controller 0 Mailbox 12 Timestamp Register */ +#define CAN_MB12_ID0 0xFFC02D98 /* CAN Controller 0 Mailbox 12 ID0 Register */ +#define CAN_MB12_ID1 0xFFC02D9C /* CAN Controller 0 Mailbox 12 ID1 Register */ +#define CAN_MB13_DATA0 0xFFC02DA0 /* CAN Controller 0 Mailbox 13 Data 0 Register */ +#define CAN_MB13_DATA1 0xFFC02DA4 /* CAN Controller 0 Mailbox 13 Data 1 Register */ +#define CAN_MB13_DATA2 0xFFC02DA8 /* CAN Controller 0 Mailbox 13 Data 2 Register */ +#define CAN_MB13_DATA3 0xFFC02DAC /* CAN Controller 0 Mailbox 13 Data 3 Register */ +#define CAN_MB13_LENGTH 0xFFC02DB0 /* CAN Controller 0 Mailbox 13 Length Register */ +#define CAN_MB13_TIMESTAMP 0xFFC02DB4 /* CAN Controller 0 Mailbox 13 Timestamp Register */ +#define CAN_MB13_ID0 0xFFC02DB8 /* CAN Controller 0 Mailbox 13 ID0 Register */ +#define CAN_MB13_ID1 0xFFC02DBC /* CAN Controller 0 Mailbox 13 ID1 Register */ +#define CAN_MB14_DATA0 0xFFC02DC0 /* CAN Controller 0 Mailbox 14 Data 0 Register */ +#define CAN_MB14_DATA1 0xFFC02DC4 /* CAN Controller 0 Mailbox 14 Data 1 Register */ +#define CAN_MB14_DATA2 0xFFC02DC8 /* CAN Controller 0 Mailbox 14 Data 2 Register */ +#define CAN_MB14_DATA3 0xFFC02DCC /* CAN Controller 0 Mailbox 14 Data 3 Register */ +#define CAN_MB14_LENGTH 0xFFC02DD0 /* CAN Controller 0 Mailbox 14 Length Register */ +#define CAN_MB14_TIMESTAMP 0xFFC02DD4 /* CAN Controller 0 Mailbox 14 Timestamp Register */ +#define CAN_MB14_ID0 0xFFC02DD8 /* CAN Controller 0 Mailbox 14 ID0 Register */ +#define CAN_MB14_ID1 0xFFC02DDC /* CAN Controller 0 Mailbox 14 ID1 Register */ +#define CAN_MB15_DATA0 0xFFC02DE0 /* CAN Controller 0 Mailbox 15 Data 0 Register */ +#define CAN_MB15_DATA1 0xFFC02DE4 /* CAN Controller 0 Mailbox 15 Data 1 Register */ +#define CAN_MB15_DATA2 0xFFC02DE8 /* CAN Controller 0 Mailbox 15 Data 2 Register */ +#define CAN_MB15_DATA3 0xFFC02DEC /* CAN Controller 0 Mailbox 15 Data 3 Register */ +#define CAN_MB15_LENGTH 0xFFC02DF0 /* CAN Controller 0 Mailbox 15 Length Register */ +#define CAN_MB15_TIMESTAMP 0xFFC02DF4 /* CAN Controller 0 Mailbox 15 Timestamp Register */ +#define CAN_MB15_ID0 0xFFC02DF8 /* CAN Controller 0 Mailbox 15 ID0 Register */ +#define CAN_MB15_ID1 0xFFC02DFC /* CAN Controller 0 Mailbox 15 ID1 Register */ +#define CAN_MB16_DATA0 0xFFC02E00 /* CAN Controller 0 Mailbox 16 Data 0 Register */ +#define CAN_MB16_DATA1 0xFFC02E04 /* CAN Controller 0 Mailbox 16 Data 1 Register */ +#define CAN_MB16_DATA2 0xFFC02E08 /* CAN Controller 0 Mailbox 16 Data 2 Register */ +#define CAN_MB16_DATA3 0xFFC02E0C /* CAN Controller 0 Mailbox 16 Data 3 Register */ +#define CAN_MB16_LENGTH 0xFFC02E10 /* CAN Controller 0 Mailbox 16 Length Register */ +#define CAN_MB16_TIMESTAMP 0xFFC02E14 /* CAN Controller 0 Mailbox 16 Timestamp Register */ +#define CAN_MB16_ID0 0xFFC02E18 /* CAN Controller 0 Mailbox 16 ID0 Register */ +#define CAN_MB16_ID1 0xFFC02E1C /* CAN Controller 0 Mailbox 16 ID1 Register */ +#define CAN_MB17_DATA0 0xFFC02E20 /* CAN Controller 0 Mailbox 17 Data 0 Register */ +#define CAN_MB17_DATA1 0xFFC02E24 /* CAN Controller 0 Mailbox 17 Data 1 Register */ +#define CAN_MB17_DATA2 0xFFC02E28 /* CAN Controller 0 Mailbox 17 Data 2 Register */ +#define CAN_MB17_DATA3 0xFFC02E2C /* CAN Controller 0 Mailbox 17 Data 3 Register */ +#define CAN_MB17_LENGTH 0xFFC02E30 /* CAN Controller 0 Mailbox 17 Length Register */ +#define CAN_MB17_TIMESTAMP 0xFFC02E34 /* CAN Controller 0 Mailbox 17 Timestamp Register */ +#define CAN_MB17_ID0 0xFFC02E38 /* CAN Controller 0 Mailbox 17 ID0 Register */ +#define CAN_MB17_ID1 0xFFC02E3C /* CAN Controller 0 Mailbox 17 ID1 Register */ +#define CAN_MB18_DATA0 0xFFC02E40 /* CAN Controller 0 Mailbox 18 Data 0 Register */ +#define CAN_MB18_DATA1 0xFFC02E44 /* CAN Controller 0 Mailbox 18 Data 1 Register */ +#define CAN_MB18_DATA2 0xFFC02E48 /* CAN Controller 0 Mailbox 18 Data 2 Register */ +#define CAN_MB18_DATA3 0xFFC02E4C /* CAN Controller 0 Mailbox 18 Data 3 Register */ +#define CAN_MB18_LENGTH 0xFFC02E50 /* CAN Controller 0 Mailbox 18 Length Register */ +#define CAN_MB18_TIMESTAMP 0xFFC02E54 /* CAN Controller 0 Mailbox 18 Timestamp Register */ +#define CAN_MB18_ID0 0xFFC02E58 /* CAN Controller 0 Mailbox 18 ID0 Register */ +#define CAN_MB18_ID1 0xFFC02E5C /* CAN Controller 0 Mailbox 18 ID1 Register */ +#define CAN_MB19_DATA0 0xFFC02E60 /* CAN Controller 0 Mailbox 19 Data 0 Register */ +#define CAN_MB19_DATA1 0xFFC02E64 /* CAN Controller 0 Mailbox 19 Data 1 Register */ +#define CAN_MB19_DATA2 0xFFC02E68 /* CAN Controller 0 Mailbox 19 Data 2 Register */ +#define CAN_MB19_DATA3 0xFFC02E6C /* CAN Controller 0 Mailbox 19 Data 3 Register */ +#define CAN_MB19_LENGTH 0xFFC02E70 /* CAN Controller 0 Mailbox 19 Length Register */ +#define CAN_MB19_TIMESTAMP 0xFFC02E74 /* CAN Controller 0 Mailbox 19 Timestamp Register */ +#define CAN_MB19_ID0 0xFFC02E78 /* CAN Controller 0 Mailbox 19 ID0 Register */ +#define CAN_MB19_ID1 0xFFC02E7C /* CAN Controller 0 Mailbox 19 ID1 Register */ +#define CAN_MB20_DATA0 0xFFC02E80 /* CAN Controller 0 Mailbox 20 Data 0 Register */ +#define CAN_MB20_DATA1 0xFFC02E84 /* CAN Controller 0 Mailbox 20 Data 1 Register */ +#define CAN_MB20_DATA2 0xFFC02E88 /* CAN Controller 0 Mailbox 20 Data 2 Register */ +#define CAN_MB20_DATA3 0xFFC02E8C /* CAN Controller 0 Mailbox 20 Data 3 Register */ +#define CAN_MB20_LENGTH 0xFFC02E90 /* CAN Controller 0 Mailbox 20 Length Register */ +#define CAN_MB20_TIMESTAMP 0xFFC02E94 /* CAN Controller 0 Mailbox 20 Timestamp Register */ +#define CAN_MB20_ID0 0xFFC02E98 /* CAN Controller 0 Mailbox 20 ID0 Register */ +#define CAN_MB20_ID1 0xFFC02E9C /* CAN Controller 0 Mailbox 20 ID1 Register */ +#define CAN_MB21_DATA0 0xFFC02EA0 /* CAN Controller 0 Mailbox 21 Data 0 Register */ +#define CAN_MB21_DATA1 0xFFC02EA4 /* CAN Controller 0 Mailbox 21 Data 1 Register */ +#define CAN_MB21_DATA2 0xFFC02EA8 /* CAN Controller 0 Mailbox 21 Data 2 Register */ +#define CAN_MB21_DATA3 0xFFC02EAC /* CAN Controller 0 Mailbox 21 Data 3 Register */ +#define CAN_MB21_LENGTH 0xFFC02EB0 /* CAN Controller 0 Mailbox 21 Length Register */ +#define CAN_MB21_TIMESTAMP 0xFFC02EB4 /* CAN Controller 0 Mailbox 21 Timestamp Register */ +#define CAN_MB21_ID0 0xFFC02EB8 /* CAN Controller 0 Mailbox 21 ID0 Register */ +#define CAN_MB21_ID1 0xFFC02EBC /* CAN Controller 0 Mailbox 21 ID1 Register */ +#define CAN_MB22_DATA0 0xFFC02EC0 /* CAN Controller 0 Mailbox 22 Data 0 Register */ +#define CAN_MB22_DATA1 0xFFC02EC4 /* CAN Controller 0 Mailbox 22 Data 1 Register */ +#define CAN_MB22_DATA2 0xFFC02EC8 /* CAN Controller 0 Mailbox 22 Data 2 Register */ +#define CAN_MB22_DATA3 0xFFC02ECC /* CAN Controller 0 Mailbox 22 Data 3 Register */ +#define CAN_MB22_LENGTH 0xFFC02ED0 /* CAN Controller 0 Mailbox 22 Length Register */ +#define CAN_MB22_TIMESTAMP 0xFFC02ED4 /* CAN Controller 0 Mailbox 22 Timestamp Register */ +#define CAN_MB22_ID0 0xFFC02ED8 /* CAN Controller 0 Mailbox 22 ID0 Register */ +#define CAN_MB22_ID1 0xFFC02EDC /* CAN Controller 0 Mailbox 22 ID1 Register */ +#define CAN_MB23_DATA0 0xFFC02EE0 /* CAN Controller 0 Mailbox 23 Data 0 Register */ +#define CAN_MB23_DATA1 0xFFC02EE4 /* CAN Controller 0 Mailbox 23 Data 1 Register */ +#define CAN_MB23_DATA2 0xFFC02EE8 /* CAN Controller 0 Mailbox 23 Data 2 Register */ +#define CAN_MB23_DATA3 0xFFC02EEC /* CAN Controller 0 Mailbox 23 Data 3 Register */ +#define CAN_MB23_LENGTH 0xFFC02EF0 /* CAN Controller 0 Mailbox 23 Length Register */ +#define CAN_MB23_TIMESTAMP 0xFFC02EF4 /* CAN Controller 0 Mailbox 23 Timestamp Register */ +#define CAN_MB23_ID0 0xFFC02EF8 /* CAN Controller 0 Mailbox 23 ID0 Register */ +#define CAN_MB23_ID1 0xFFC02EFC /* CAN Controller 0 Mailbox 23 ID1 Register */ +#define CAN_MB24_DATA0 0xFFC02F00 /* CAN Controller 0 Mailbox 24 Data 0 Register */ +#define CAN_MB24_DATA1 0xFFC02F04 /* CAN Controller 0 Mailbox 24 Data 1 Register */ +#define CAN_MB24_DATA2 0xFFC02F08 /* CAN Controller 0 Mailbox 24 Data 2 Register */ +#define CAN_MB24_DATA3 0xFFC02F0C /* CAN Controller 0 Mailbox 24 Data 3 Register */ +#define CAN_MB24_LENGTH 0xFFC02F10 /* CAN Controller 0 Mailbox 24 Length Register */ +#define CAN_MB24_TIMESTAMP 0xFFC02F14 /* CAN Controller 0 Mailbox 24 Timestamp Register */ +#define CAN_MB24_ID0 0xFFC02F18 /* CAN Controller 0 Mailbox 24 ID0 Register */ +#define CAN_MB24_ID1 0xFFC02F1C /* CAN Controller 0 Mailbox 24 ID1 Register */ +#define CAN_MB25_DATA0 0xFFC02F20 /* CAN Controller 0 Mailbox 25 Data 0 Register */ +#define CAN_MB25_DATA1 0xFFC02F24 /* CAN Controller 0 Mailbox 25 Data 1 Register */ +#define CAN_MB25_DATA2 0xFFC02F28 /* CAN Controller 0 Mailbox 25 Data 2 Register */ +#define CAN_MB25_DATA3 0xFFC02F2C /* CAN Controller 0 Mailbox 25 Data 3 Register */ +#define CAN_MB25_LENGTH 0xFFC02F30 /* CAN Controller 0 Mailbox 25 Length Register */ +#define CAN_MB25_TIMESTAMP 0xFFC02F34 /* CAN Controller 0 Mailbox 25 Timestamp Register */ +#define CAN_MB25_ID0 0xFFC02F38 /* CAN Controller 0 Mailbox 25 ID0 Register */ +#define CAN_MB25_ID1 0xFFC02F3C /* CAN Controller 0 Mailbox 25 ID1 Register */ +#define CAN_MB26_DATA0 0xFFC02F40 /* CAN Controller 0 Mailbox 26 Data 0 Register */ +#define CAN_MB26_DATA1 0xFFC02F44 /* CAN Controller 0 Mailbox 26 Data 1 Register */ +#define CAN_MB26_DATA2 0xFFC02F48 /* CAN Controller 0 Mailbox 26 Data 2 Register */ +#define CAN_MB26_DATA3 0xFFC02F4C /* CAN Controller 0 Mailbox 26 Data 3 Register */ +#define CAN_MB26_LENGTH 0xFFC02F50 /* CAN Controller 0 Mailbox 26 Length Register */ +#define CAN_MB26_TIMESTAMP 0xFFC02F54 /* CAN Controller 0 Mailbox 26 Timestamp Register */ +#define CAN_MB26_ID0 0xFFC02F58 /* CAN Controller 0 Mailbox 26 ID0 Register */ +#define CAN_MB26_ID1 0xFFC02F5C /* CAN Controller 0 Mailbox 26 ID1 Register */ +#define CAN_MB27_DATA0 0xFFC02F60 /* CAN Controller 0 Mailbox 27 Data 0 Register */ +#define CAN_MB27_DATA1 0xFFC02F64 /* CAN Controller 0 Mailbox 27 Data 1 Register */ +#define CAN_MB27_DATA2 0xFFC02F68 /* CAN Controller 0 Mailbox 27 Data 2 Register */ +#define CAN_MB27_DATA3 0xFFC02F6C /* CAN Controller 0 Mailbox 27 Data 3 Register */ +#define CAN_MB27_LENGTH 0xFFC02F70 /* CAN Controller 0 Mailbox 27 Length Register */ +#define CAN_MB27_TIMESTAMP 0xFFC02F74 /* CAN Controller 0 Mailbox 27 Timestamp Register */ +#define CAN_MB27_ID0 0xFFC02F78 /* CAN Controller 0 Mailbox 27 ID0 Register */ +#define CAN_MB27_ID1 0xFFC02F7C /* CAN Controller 0 Mailbox 27 ID1 Register */ +#define CAN_MB28_DATA0 0xFFC02F80 /* CAN Controller 0 Mailbox 28 Data 0 Register */ +#define CAN_MB28_DATA1 0xFFC02F84 /* CAN Controller 0 Mailbox 28 Data 1 Register */ +#define CAN_MB28_DATA2 0xFFC02F88 /* CAN Controller 0 Mailbox 28 Data 2 Register */ +#define CAN_MB28_DATA3 0xFFC02F8C /* CAN Controller 0 Mailbox 28 Data 3 Register */ +#define CAN_MB28_LENGTH 0xFFC02F90 /* CAN Controller 0 Mailbox 28 Length Register */ +#define CAN_MB28_TIMESTAMP 0xFFC02F94 /* CAN Controller 0 Mailbox 28 Timestamp Register */ +#define CAN_MB28_ID0 0xFFC02F98 /* CAN Controller 0 Mailbox 28 ID0 Register */ +#define CAN_MB28_ID1 0xFFC02F9C /* CAN Controller 0 Mailbox 28 ID1 Register */ +#define CAN_MB29_DATA0 0xFFC02FA0 /* CAN Controller 0 Mailbox 29 Data 0 Register */ +#define CAN_MB29_DATA1 0xFFC02FA4 /* CAN Controller 0 Mailbox 29 Data 1 Register */ +#define CAN_MB29_DATA2 0xFFC02FA8 /* CAN Controller 0 Mailbox 29 Data 2 Register */ +#define CAN_MB29_DATA3 0xFFC02FAC /* CAN Controller 0 Mailbox 29 Data 3 Register */ +#define CAN_MB29_LENGTH 0xFFC02FB0 /* CAN Controller 0 Mailbox 29 Length Register */ +#define CAN_MB29_TIMESTAMP 0xFFC02FB4 /* CAN Controller 0 Mailbox 29 Timestamp Register */ +#define CAN_MB29_ID0 0xFFC02FB8 /* CAN Controller 0 Mailbox 29 ID0 Register */ +#define CAN_MB29_ID1 0xFFC02FBC /* CAN Controller 0 Mailbox 29 ID1 Register */ +#define CAN_MB30_DATA0 0xFFC02FC0 /* CAN Controller 0 Mailbox 30 Data 0 Register */ +#define CAN_MB30_DATA1 0xFFC02FC4 /* CAN Controller 0 Mailbox 30 Data 1 Register */ +#define CAN_MB30_DATA2 0xFFC02FC8 /* CAN Controller 0 Mailbox 30 Data 2 Register */ +#define CAN_MB30_DATA3 0xFFC02FCC /* CAN Controller 0 Mailbox 30 Data 3 Register */ +#define CAN_MB30_LENGTH 0xFFC02FD0 /* CAN Controller 0 Mailbox 30 Length Register */ +#define CAN_MB30_TIMESTAMP 0xFFC02FD4 /* CAN Controller 0 Mailbox 30 Timestamp Register */ +#define CAN_MB30_ID0 0xFFC02FD8 /* CAN Controller 0 Mailbox 30 ID0 Register */ +#define CAN_MB30_ID1 0xFFC02FDC /* CAN Controller 0 Mailbox 30 ID1 Register */ +#define CAN_MB31_DATA0 0xFFC02FE0 /* CAN Controller 0 Mailbox 31 Data 0 Register */ +#define CAN_MB31_DATA1 0xFFC02FE4 /* CAN Controller 0 Mailbox 31 Data 1 Register */ +#define CAN_MB31_DATA2 0xFFC02FE8 /* CAN Controller 0 Mailbox 31 Data 2 Register */ +#define CAN_MB31_DATA3 0xFFC02FEC /* CAN Controller 0 Mailbox 31 Data 3 Register */ +#define CAN_MB31_LENGTH 0xFFC02FF0 /* CAN Controller 0 Mailbox 31 Length Register */ +#define CAN_MB31_TIMESTAMP 0xFFC02FF4 /* CAN Controller 0 Mailbox 31 Timestamp Register */ +#define CAN_MB31_ID0 0xFFC02FF8 /* CAN Controller 0 Mailbox 31 ID0 Register */ +#define CAN_MB31_ID1 0xFFC02FFC /* CAN Controller 0 Mailbox 31 ID1 Register */ +#define PWM1_CTRL 0xFFC03000 /* PWM1 Control Register */ +#define PWM1_STAT 0xFFC03004 /* PWM1 Status Register */ +#define PWM1_TM 0xFFC03008 /* PWM1 Period Register */ +#define PWM1_DT 0xFFC0300C /* PWM1 Dead Time Register */ +#define PWM1_GATE 0xFFC03010 /* PWM1 Chopping Control */ +#define PWM1_CHA 0xFFC03014 /* PWM1 Channel A Duty Control */ +#define PWM1_CHB 0xFFC03018 /* PWM1 Channel B Duty Control */ +#define PWM1_CHC 0xFFC0301C /* PWM1 Channel C Duty Control */ +#define PWM1_SEG 0xFFC03020 /* PWM1 Crossover and Output Enable */ +#define PWM1_SYNCWT 0xFFC03024 /* PWM1 Sync pulse width control */ +#define PWM1_CHAL 0xFFC03028 /* PWM1 Channel AL Duty Control (SR mode only) */ +#define PWM1_CHBL 0xFFC0302C /* PWM1 Channel BL Duty Control (SR mode only) */ +#define PWM1_CHCL 0xFFC03030 /* PWM1 Channel CL Duty Control (SR mode only) */ +#define PWM1_LSI 0xFFC03034 /* Low Side Invert (SR mode only) */ +#define PWM1_STAT2 0xFFC03038 /* PWM1 Status Register */ +#define ACM_CTL 0xFFC03100 /* ACM Control Register */ +#define ACM_TC0 0xFFC03104 /* ACM Timing Configuration 0 Register */ +#define ACM_TC1 0xFFC03108 /* ACM Timing Configuration 1 Register */ +#define ACM_STAT 0xFFC0310C /* ACM Status Register */ +#define ACM_ES 0xFFC03110 /* ACM Event Status Register */ +#define ACM_IMSK 0xFFC03114 /* ACM Interrupt Mask Register */ +#define ACM_MS 0xFFC03118 /* ACM Missed Event Status Register */ +#define ACM_EMSK 0xFFC0311C /* ACM Missed Event Interrupt Mask Register */ +#define ACM_ER0 0xFFC03120 /* ACM Event 0 Control Register */ +#define ACM_ER1 0xFFC03124 /* ACM Event 1 Control Register */ +#define ACM_ER2 0xFFC03128 /* ACM Event 2 Control Register */ +#define ACM_ER3 0xFFC0312C /* ACM Event 3 Control Register */ +#define ACM_ER4 0xFFC03130 /* ACM Event 4 Control Register */ +#define ACM_ER5 0xFFC03134 /* ACM Event 5 Control Register */ +#define ACM_ER6 0xFFC03138 /* ACM Event 6 Control Register */ +#define ACM_ER7 0xFFC0313C /* ACM Event 7 Control Register */ +#define ACM_ER8 0xFFC03140 /* ACM Event 8 Control Register */ +#define ACM_ER9 0xFFC03144 /* ACM Event 9 Control Register */ +#define ACM_ER10 0xFFC03148 /* ACM Event 10 Control Register */ +#define ACM_ER11 0xFFC0314C /* ACM Event 11 Control Register */ +#define ACM_ER12 0xFFC03150 /* ACM Event 12 Control Register */ +#define ACM_ER13 0xFFC03154 /* ACM Event 13 Control Register */ +#define ACM_ER14 0xFFC03158 /* ACM Event 14 Control Register */ +#define ACM_ER15 0xFFC0315C /* ACM Event 15 Control Register */ +#define ACM_ET0 0xFFC03180 /* ACM Event 0 Time Register */ +#define ACM_ET1 0xFFC03184 /* ACM Event 1 Time Register */ +#define ACM_ET2 0xFFC03188 /* ACM Event 2 Time Register */ +#define ACM_ET3 0xFFC0318C /* ACM Event 3 Time Register */ +#define ACM_ET4 0xFFC03190 /* ACM Event 4 Time Register */ +#define ACM_ET5 0xFFC03194 /* ACM Event 5 Time Register */ +#define ACM_ET6 0xFFC03198 /* ACM Event 6 Time Register */ +#define ACM_ET7 0xFFC0319C /* ACM Event 7 Time Register */ +#define ACM_ET8 0xFFC031A0 /* ACM Event 8 Time Register */ +#define ACM_ET9 0xFFC031A4 /* ACM Event 9 Time Register */ +#define ACM_ET10 0xFFC031A8 /* ACM Event 10 Time Register */ +#define ACM_ET11 0xFFC031AC /* ACM Event 11 Time Register */ +#define ACM_ET12 0xFFC031B0 /* ACM Event 12 Time Register */ +#define ACM_ET13 0xFFC031B4 /* ACM Event 13 Time Register */ +#define ACM_ET14 0xFFC031B8 /* ACM Event 14 Time Register */ +#define ACM_ET15 0xFFC031BC /* ACM Event 15 Time Register */ +#define ACM_TMR0 0xFFC031C0 /* ACM Timer 0 Registers */ +#define ACM_TMR1 0xFFC031C4 /* ACM Timer 1 Registers */ +#define PORTF_FER 0xFFC03200 /* Port F Function Enable Register (Alternate/Flag*) */ +#define PORTG_FER 0xFFC03204 /* Port G Function Enable Register (Alternate/Flag*) */ +#define PORTH_FER 0xFFC03208 /* Port H Function Enable Register (Alternate/Flag*) */ +#define PORTF_MUX 0xFFC03210 /* Port F mux control */ +#define PORTG_MUX 0xFFC03214 /* Port G mux control */ +#define PORTH_MUX 0xFFC03218 /* Port H mux control */ +#define PORTF_DRIVE 0xFFC03220 /* Port F drive strength control */ +#define PORTG_DRIVE 0xFFC03224 /* Port G drive strength control */ +#define PORTH_DRIVE 0xFFC03228 /* Port H drive strength control */ +#define PORTF_HYSTERESIS 0xFFC03240 /* Port F Schmitt trigger control */ +#define PORTG_HYSTERESIS 0xFFC03244 /* Port G Schmitt trigger control */ +#define PORTH_HYSTERESIS 0xFFC03248 /* Port H Schmitt trigger control */ +#define NONGPIO_DRIVE 0xFFC03280 /* Non-GPIO Port drive strength control */ +#define NONGPIO_HYSTERESIS 0xFFC03288 /* Non-GPIO Port Schmitt trigger control */ +#define FLASH_CONTROL 0xFFC0328C /* Stacked flash control register */ +#define FLASH_CONTROL_SET 0xFFC03290 /* Stacked flash control set register */ +#define FLASH_CONTROL_CLEAR 0xFFC03294 /* Stacked flash control clear register */ +#define CNT1_CONFIG 0xFFC03300 /* Counter 1 Configuration Register */ +#define CNT1_IMASK 0xFFC03304 /* Counter 1 Interrupt Mask Register */ +#define CNT1_STATUS 0xFFC03308 /* Counter 1 Status Register */ +#define CNT1_COMMAND 0xFFC0330C /* Counter 1 Command Register */ +#define CNT1_DEBOUNCE 0xFFC03310 /* Counter 1 Debounce Register */ +#define CNT1_COUNTER 0xFFC03314 /* Counter 1 Counter Register */ +#define CNT1_MAX 0xFFC03318 /* Counter 1 Boundry Value Register - max count */ +#define CNT1_MIN 0xFFC0331C /* Counter 1 Boundry Value Register - min count */ +#define SPI1_CTL 0xFFC03400 /* SPI1 Control */ +#define SPI1_FLG 0xFFC03404 /* SPI1 Flag Register */ +#define SPI1_STAT 0xFFC03408 /* SPI1 Status Register */ +#define SPI1_TDBR 0xFFC0340C /* SPI1 Transmit Data Buffer */ +#define SPI1_RDBR 0xFFC03410 /* SPI1 Receive Data Buffer */ +#define SPI1_BAUD 0xFFC03414 /* SPI1 Baud Rate */ +#define SPI1_SHADOW 0xFFC03418 /* SPI1_RDBR Shadow Register */ +#define CNT0_CONFIG 0xFFC03500 /* Configuration/Control Register */ +#define CNT0_IMASK 0xFFC03504 /* Interrupt Mask Register */ +#define CNT0_STATUS 0xFFC03508 /* Status Register */ +#define CNT0_COMMAND 0xFFC0350C /* Command Register */ +#define CNT0_DEBOUNCE 0xFFC03510 /* Debounce Prescaler Register */ +#define CNT0_COUNTER 0xFFC03514 /* Counter Register */ +#define CNT0_MAX 0xFFC03518 /* Maximal Count Boundary Value Register */ +#define CNT0_MIN 0xFFC0351C /* Minimal Count Boundary Value Register */ +#define PWM0_CTRL 0xFFC03700 /* PWM Control Register */ +#define PWM0_STAT 0xFFC03704 /* PWM Status Register */ +#define PWM0_TM 0xFFC03708 /* PWM Period Register */ +#define PWM0_DT 0xFFC0370C /* PWM Dead Time Register */ +#define PWM0_GATE 0xFFC03710 /* PWM Chopping Control */ +#define PWM0_CHA 0xFFC03714 /* PWM Channel A Duty Control */ +#define PWM0_CHB 0xFFC03718 /* PWM Channel B Duty Control */ +#define PWM0_CHC 0xFFC0371C /* PWM Channel C Duty Control */ +#define PWM0_SEG 0xFFC03720 /* PWM Crossover and Output Enable */ +#define PWM0_SYNCWT 0xFFC03724 /* PWM Sync pulse width control */ +#define PWM0_CHAL 0xFFC03728 /* PWM Channel AL Duty Control (SR mode only) */ +#define PWM0_CHBL 0xFFC0372C /* PWM Channel BL Duty Control (SR mode only) */ +#define PWM0_CHCL 0xFFC03730 /* PWM Channel CL Duty Control (SR mode only) */ +#define PWM0_LSI 0xFFC03734 /* Low Side Invert (SR mode only) */ +#define PWM0_STAT2 0xFFC03738 /* PWM Status Register */ +#define RSI_PWR_CONTROL 0xFFC03800 /* RSI Power Control Register */ +#define RSI_CLK_CONTROL 0xFFC03804 /* RSI Clock Control Register */ +#define RSI_ARGUMENT 0xFFC03808 /* RSI Argument Register */ +#define RSI_COMMAND 0xFFC0380C /* RSI Command Register */ +#define RSI_RESP_CMD 0xFFC03810 /* RSI Response Command Register */ +#define RSI_RESPONSE0 0xFFC03814 /* RSI Response Register */ +#define RSI_RESPONSE1 0xFFC03818 /* RSI Response Register */ +#define RSI_RESPONSE2 0xFFC0381C /* RSI Response Register */ +#define RSI_RESPONSE3 0xFFC03820 /* RSI Response Register */ +#define RSI_DATA_TIMER 0xFFC03824 /* RSI Data Timer Register */ +#define RSI_DATA_LGTH 0xFFC03828 /* RSI Data Length Register */ +#define RSI_DATA_CONTROL 0xFFC0382C /* RSI Data Control Register */ +#define RSI_DATA_CNT 0xFFC03830 /* RSI Data Counter Register */ +#define RSI_STATUS 0xFFC03834 /* RSI Status Register */ +#define RSI_STATUSCL 0xFFC03838 /* RSI Status Clear Register */ +#define RSI_MASK0 0xFFC0383C /* RSI Interrupt 0 Mask Register */ +#define RSI_MASK1 0xFFC03840 /* RSI Interrupt 1 Mask Register */ +#define RSI_FIFO_CNT 0xFFC03848 /* RSI FIFO Counter Register */ +#define RSI_CEATA_CONTROL 0xFFC0384C /* RSI CEATA Register */ +#define RSI_FIFO 0xFFC03880 /* RSI Data FIFO Register */ +#define RSI_ESTAT 0xFFC038C0 /* RSI Exception Status Register */ +#define RSI_EMASK 0xFFC038C4 /* RSI Exception Mask Register */ +#define RSI_CONFIG 0xFFC038C8 /* RSI Configuration Register */ +#define RSI_RD_WAIT_EN 0xFFC038CC /* RSI Read Wait Enable Register */ +#define RSI_PID0 0xFFC038D0 /* RSI Peripheral ID Register 0 */ +#define RSI_PID1 0xFFC038D4 /* RSI Peripheral ID Register 1 */ +#define RSI_PID2 0xFFC038D8 /* RSI Peripheral ID Register 2 */ +#define RSI_PID3 0xFFC038DC /* RSI Peripheral ID Register 3 */ +#define DMA_TC_CNT 0xFFC00B0C +#define DMA_TC_PER 0xFFC00B10 + +#define L1_DATA_A_SRAM 0xFF800000 /* 0xFF800000 -> 0xFF803FFF Data Bank A SRAM */ +#define L1_DATA_A_SRAM_SIZE 0x8000 +#define L1_DATA_A_SRAM_END (L1_DATA_A_SRAM + L1_DATA_A_SRAM_SIZE) +#define L1_INST_SRAM 0xFFA00000 /* 0xFFA00000 -> 0xFFA07FFF Instruction Bank A SRAM */ +#define L1_INST_SRAM_SIZE 0x8000 +#define L1_INST_SRAM_END (L1_INST_SRAM + L1_INST_SRAM_SIZE) + +#endif /* __BFIN_DEF_ADSP_BF504_proc__ */ diff --git a/arch/blackfin/include/asm/mach-bf506/BF506_cdef.h b/arch/blackfin/include/asm/mach-bf506/BF506_cdef.h new file mode 100644 index 0000000..4c5baac --- /dev/null +++ b/arch/blackfin/include/asm/mach-bf506/BF506_cdef.h @@ -0,0 +1,11 @@ +/* DO NOT EDIT THIS FILE + * Automatically generated by generate-cdef-headers.xsl + * DO NOT EDIT THIS FILE + */ + +#ifndef __BFIN_CDEF_ADSP_BF506_proc__ +#define __BFIN_CDEF_ADSP_BF506_proc__ + +#include "BF504_cdef.h" + +#endif /* __BFIN_CDEF_ADSP_BF506_proc__ */ diff --git a/arch/blackfin/include/asm/mach-bf506/BF506_def.h b/arch/blackfin/include/asm/mach-bf506/BF506_def.h new file mode 100644 index 0000000..1f91397 --- /dev/null +++ b/arch/blackfin/include/asm/mach-bf506/BF506_def.h @@ -0,0 +1,11 @@ +/* DO NOT EDIT THIS FILE + * Automatically generated by generate-def-headers.xsl + * DO NOT EDIT THIS FILE + */ + +#ifndef __BFIN_DEF_ADSP_BF506_proc__ +#define __BFIN_DEF_ADSP_BF506_proc__ + +#include "BF504_def.h" + +#endif /* __BFIN_DEF_ADSP_BF506_proc__ */ diff --git a/arch/blackfin/include/asm/mach-bf506/anomaly.h b/arch/blackfin/include/asm/mach-bf506/anomaly.h new file mode 100644 index 0000000..e767233 --- /dev/null +++ b/arch/blackfin/include/asm/mach-bf506/anomaly.h @@ -0,0 +1,128 @@ +/* + * DO NOT EDIT THIS FILE + * This file is under version control at + * svn://sources.blackfin.uclinux.org/toolchain/trunk/proc-defs/header-frags/ + * and can be replaced with that version at any time + * DO NOT EDIT THIS FILE + * + * Copyright 2004-2010 Analog Devices Inc. + * Licensed under the ADI BSD license. + * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd + */ + +/* This file should be up to date with: + */ + +#if __SILICON_REVISION__ < 0 +# error will not work on BF506 silicon version +#endif + +#ifndef _MACH_ANOMALY_H_ +#define _MACH_ANOMALY_H_ + +/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */ +#define ANOMALY_05000074 (1) +/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */ +#define ANOMALY_05000119 (1) +/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */ +#define ANOMALY_05000122 (1) +/* False Hardware Error from an Access in the Shadow of a Conditional Branch */ +#define ANOMALY_05000245 (1) +/* Incorrect Timer Pulse Width in Single-Shot PWM_OUT Mode with External Clock */ +#define ANOMALY_05000254 (1) +/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */ +#define ANOMALY_05000265 (1) +/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */ +#define ANOMALY_05000310 (1) +/* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */ +#define ANOMALY_05000366 (1) +/* Speculative Fetches Can Cause Undesired External FIFO Operations */ +#define ANOMALY_05000416 (1) +/* Speculative Fetches of Indirect-Pointer Instructions Can Cause False Hardware Errors */ +#define ANOMALY_05000426 (1) +/* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */ +#define ANOMALY_05000443 (1) +/* UART IrDA Receiver Fails on Extended Bit Pulses */ +#define ANOMALY_05000447 (1) +/* False Hardware Error when RETI Points to Invalid Memory */ +#define ANOMALY_05000461 (1) +/* PLL Latches Incorrect Settings During Reset */ +#define ANOMALY_05000469 (1) +/* Incorrect Default MSEL Value in PLL_CTL */ +#define ANOMALY_05000472 (1) +/* Interrupted SPORT Receive Data Register Read Results In Underflow when SLEN > 15 */ +#define ANOMALY_05000473 (1) +/* TESTSET Instruction Cannot Be Interrupted */ +#define ANOMALY_05000477 (1) +/* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */ +#define ANOMALY_05000481 (1) +/* IFLUSH sucks at life */ +#define ANOMALY_05000491 (1) + +/* Anomalies that don't exist on this proc */ +#define ANOMALY_05000099 (0) +#define ANOMALY_05000120 (0) +#define ANOMALY_05000125 (0) +#define ANOMALY_05000149 (0) +#define ANOMALY_05000158 (0) +#define ANOMALY_05000171 (0) +#define ANOMALY_05000179 (0) +#define ANOMALY_05000182 (0) +#define ANOMALY_05000183 (0) +#define ANOMALY_05000189 (0) +#define ANOMALY_05000198 (0) +#define ANOMALY_05000202 (0) +#define ANOMALY_05000215 (0) +#define ANOMALY_05000219 (0) +#define ANOMALY_05000220 (0) +#define ANOMALY_05000227 (0) +#define ANOMALY_05000230 (0) +#define ANOMALY_05000231 (0) +#define ANOMALY_05000233 (0) +#define ANOMALY_05000234 (0) +#define ANOMALY_05000242 (0) +#define ANOMALY_05000244 (0) +#define ANOMALY_05000248 (0) +#define ANOMALY_05000250 (0) +#define ANOMALY_05000257 (0) +#define ANOMALY_05000261 (0) +#define ANOMALY_05000263 (0) +#define ANOMALY_05000266 (0) +#define ANOMALY_05000273 (0) +#define ANOMALY_05000274 (0) +#define ANOMALY_05000278 (0) +#define ANOMALY_05000281 (0) +#define ANOMALY_05000283 (0) +#define ANOMALY_05000285 (0) +#define ANOMALY_05000287 (0) +#define ANOMALY_05000301 (0) +#define ANOMALY_05000305 (0) +#define ANOMALY_05000307 (0) +#define ANOMALY_05000311 (0) +#define ANOMALY_05000312 (0) +#define ANOMALY_05000315 (0) +#define ANOMALY_05000323 (0) +#define ANOMALY_05000353 (0) +#define ANOMALY_05000357 (0) +#define ANOMALY_05000362 (1) +#define ANOMALY_05000363 (0) +#define ANOMALY_05000364 (0) +#define ANOMALY_05000371 (0) +#define ANOMALY_05000380 (0) +#define ANOMALY_05000386 (0) +#define ANOMALY_05000389 (0) +#define ANOMALY_05000400 (0) +#define ANOMALY_05000402 (0) +#define ANOMALY_05000412 (0) +#define ANOMALY_05000432 (0) +#define ANOMALY_05000440 (0) +#define ANOMALY_05000448 (0) +#define ANOMALY_05000456 (0) +#define ANOMALY_05000450 (0) +#define ANOMALY_05000465 (0) +#define ANOMALY_05000467 (0) +#define ANOMALY_05000474 (0) +#define ANOMALY_05000475 (0) +#define ANOMALY_05000485 (0) + +#endif diff --git a/arch/blackfin/include/asm/mach-bf506/def_local.h b/arch/blackfin/include/asm/mach-bf506/def_local.h new file mode 100644 index 0000000..e7a416d --- /dev/null +++ b/arch/blackfin/include/asm/mach-bf506/def_local.h @@ -0,0 +1,5 @@ +#include "gpio.h" +#include "portmux.h" +#include "ports.h" + +#define CONFIG_BF50x 1 /* Linux glue */ diff --git a/arch/blackfin/include/asm/mach-bf506/gpio.h b/arch/blackfin/include/asm/mach-bf506/gpio.h new file mode 100644 index 0000000..08a82f4 --- /dev/null +++ b/arch/blackfin/include/asm/mach-bf506/gpio.h @@ -0,0 +1,52 @@ +/* + * Copyright (C) 2008 Analog Devices Inc. + * Licensed under the GPL-2 or later. + */ + + +#ifndef _MACH_GPIO_H_ +#define _MACH_GPIO_H_ + +#define MAX_BLACKFIN_GPIOS 35 + +#define GPIO_PF0 0 +#define GPIO_PF1 1 +#define GPIO_PF2 2 +#define GPIO_PF3 3 +#define GPIO_PF4 4 +#define GPIO_PF5 5 +#define GPIO_PF6 6 +#define GPIO_PF7 7 +#define GPIO_PF8 8 +#define GPIO_PF9 9 +#define GPIO_PF10 10 +#define GPIO_PF11 11 +#define GPIO_PF12 12 +#define GPIO_PF13 13 +#define GPIO_PF14 14 +#define GPIO_PF15 15 +#define GPIO_PG0 16 +#define GPIO_PG1 17 +#define GPIO_PG2 18 +#define GPIO_PG3 19 +#define GPIO_PG4 20 +#define GPIO_PG5 21 +#define GPIO_PG6 22 +#define GPIO_PG7 23 +#define GPIO_PG8 24 +#define GPIO_PG9 25 +#define GPIO_PG10 26 +#define GPIO_PG11 27 +#define GPIO_PG12 28 +#define GPIO_PG13 29 +#define GPIO_PG14 30 +#define GPIO_PG15 31 +#define GPIO_PH0 32 +#define GPIO_PH1 33 +#define GPIO_PH2 34 + +#define PORT_F GPIO_PF0 +#define PORT_G GPIO_PG0 +#define PORT_H GPIO_PH0 + +#endif /* _MACH_GPIO_H_ */ diff --git a/arch/blackfin/include/asm/mach-bf506/portmux.h b/arch/blackfin/include/asm/mach-bf506/portmux.h new file mode 100644 index 0000000..086186d --- /dev/null +++ b/arch/blackfin/include/asm/mach-bf506/portmux.h @@ -0,0 +1,148 @@ +/* + * Copyright 2008-2010 Analog Devices Inc. + * + * Licensed under the GPL-2 or later + */ + +#ifndef _MACH_PORTMUX_H_ +#define _MACH_PORTMUX_H_ + +#define MAX_RESOURCES MAX_BLACKFIN_GPIOS + +/* PPI Port Mux */ +#define P_PPI0_D0 (P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(2)) +#define P_PPI0_D1 (P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(2)) +#define P_PPI0_D2 (P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(2)) +#define P_PPI0_D3 (P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(2)) +#define P_PPI0_D4 (P_DEFINED | P_IDENT(GPIO_PF11) | P_FUNCT(2)) +#define P_PPI0_D5 (P_DEFINED | P_IDENT(GPIO_PF10) | P_FUNCT(2)) +#define P_PPI0_D6 (P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(2)) +#define P_PPI0_D7 (P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(2)) +#define P_PPI0_D8 (P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(2)) +#define P_PPI0_D9 (P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(2)) +#define P_PPI0_D10 (P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(2)) +#define P_PPI0_D11 (P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(2)) +#define P_PPI0_D12 (P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(2)) +#define P_PPI0_D13 (P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(2)) +#define P_PPI0_D14 (P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(2)) +#define P_PPI0_D15 (P_DEFINED | P_IDENT(GPIO_PG12) | P_FUNCT(2)) + +#define P_PPI0_CLK (P_DEFINED | P_IDENT(GPIO_PG0) | P_FUNCT(1)) +#define P_PPI0_FS1 (P_DEFINED | P_IDENT(GPIO_PG14) | P_FUNCT(2)) +#define P_PPI0_FS2 (P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(2)) +#define P_PPI0_FS3 (P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(1)) + +/* SPI Port Mux */ +#define P_SPI0_SCK (P_DEFINED | P_IDENT(GPIO_PF10) | P_FUNCT(0)) +#define P_SPI0_MISO (P_DEFINED | P_IDENT(GPIO_PF11) | P_FUNCT(0)) +#define P_SPI0_MOSI (P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(0)) + +#define P_SPI0_SSEL1 (P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(0)) +#define P_SPI0_SSEL2 (P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(0)) +#define P_SPI0_SSEL3 (P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(0)) + +#define P_SPI1_SCK (P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(0)) +#define P_SPI1_MISO (P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(0)) +#define P_SPI1_MOSI (P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(0)) + +#define P_SPI1_SSEL1 (P_DEFINED | P_IDENT(GPIO_PG2) | P_FUNCT(0)) +#define P_SPI1_SSEL2 (P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(0)) +#define P_SPI1_SSEL3 (P_DEFINED | P_IDENT(GPIO_PG0) | P_FUNCT(0)) + +#define GPIO_DEFAULT_BOOT_SPI_CS GPIO_PF13 +#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL1 + +/* SPORT Port Mux */ +#define P_SPORT0_DRPRI (P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(0)) +#define P_SPORT0_RSCLK (P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(0)) +#define P_SPORT0_RFS (P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(0)) +#define P_SPORT0_TFS (P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(0)) +#define P_SPORT0_DTPRI (P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(0)) +#define P_SPORT0_TSCLK (P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(0)) +#define P_SPORT0_DTSEC (P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(1)) +#define P_SPORT0_DRSEC (P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(1)) + +#define P_SPORT1_DRPRI (P_DEFINED | P_IDENT(GPIO_PG9) | P_FUNCT(0)) +#define P_SPORT1_RFS (P_DEFINED | P_IDENT(GPIO_PG10) | P_FUNCT(0)) +#define P_SPORT1_RSCLK (P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(0)) +#define P_SPORT1_DTPRI (P_DEFINED | P_IDENT(GPIO_PH0) | P_FUNCT(1)) +#define P_SPORT1_TFS (P_DEFINED | P_IDENT(GPIO_PH1) | P_FUNCT(1)) +#define P_SPORT1_TSCLK (P_DEFINED | P_IDENT(GPIO_PH2) | P_FUNCT(1)) +#define P_SPORT1_DTSEC (P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(1)) +#define P_SPORT1_DRSEC (P_DEFINED | P_IDENT(GPIO_PG8) | P_FUNCT(0)) + +/* UART Port Mux */ +#ifdef CONFIG_BF506_UART0_PORTF +#define P_UART0_TX (P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(1)) +#define P_UART0_RX (P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(1)) +#else +#define P_UART0_TX (P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(0)) +#define P_UART0_RX (P_DEFINED | P_IDENT(GPIO_PG12) | P_FUNCT(0)) +#endif +#define P_UART0_RTS (P_DEFINED | P_IDENT(GPIO_PG14) | P_FUNCT(0)) +#define P_UART0_CTS (P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(0)) + +#ifdef CONFIG_BF506_UART1_PORTG +#define P_UART1_TX (P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(0)) +#define P_UART1_RX (P_DEFINED | P_IDENT(GPIO_PG0) | P_FUNCT(0)) +#else +#define P_UART1_TX (P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(0)) +#define P_UART1_RX (P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(0)) +#endif +#define P_UART1_RTS (P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(0)) +#define P_UART1_CTS (P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(0)) + +/* Timer */ +#define P_TMRCLK (P_DEFINED | P_IDENT(GPIO_PG0) | P_FUNCT(1)) +#define P_TMR0 (P_DEFINED | P_IDENT(GPIO_PG14) | P_FUNCT(2)) +#define P_TMR1 (P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(2)) +#define P_TMR2 (P_DEFINED | P_IDENT(GPIO_PF10) | P_FUNCT(1)) +#define P_TMR3 (P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(1)) +#define P_TMR4 (P_DEFINED | P_IDENT(GPIO_PG2) | P_FUNCT(1)) +#define P_TMR5 (P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(2)) +#define P_TMR6 (P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(2)) +#define P_TMR7 (P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(1)) + +/* CAN */ +#define P_CAN_TX (P_DEFINED | P_IDENT(GPIO_PG2) | P_FUNCT(2)) +#define P_CAN_RX (P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(2)) + +/* PWM */ +#define P_PWM0_AH (P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(1)) +#define P_PWM0_AL (P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(1)) +#define P_PWM0_BH (P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(1)) +#define P_PWM0_BL (P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(1)) +#define P_PWM0_CH (P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(1)) +#define P_PWM0_CL (P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(1)) +#define P_PWM0_SYNC (P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(1)) +#define P_PWM0_TRIP (P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(1)) + +#define P_PWM1_AH (P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(2)) +#define P_PWM1_AL (P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(2)) +#define P_PWM1_BH (P_DEFINED | P_IDENT(GPIO_PG8) | P_FUNCT(2)) +#define P_PWM1_BL (P_DEFINED | P_IDENT(GPIO_PG9) | P_FUNCT(2)) +#define P_PWM1_CH (P_DEFINED | P_IDENT(GPIO_PG10) | P_FUNCT(2)) +#define P_PWM1_CL (P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(2)) +#define P_PWM1_SYNC (P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(2)) +#define P_PWM1_TRIP (P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(2)) + +/* RSI */ +#define P_RSI_DATA0 (P_DEFINED | P_IDENT(GPIO_PG9) | P_FUNCT(1)) +#define P_RSI_DATA1 (P_DEFINED | P_IDENT(GPIO_PG8) | P_FUNCT(1)) +#define P_RSI_DATA2 (P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(1)) +#define P_RSI_DATA3 (P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(1)) +#define P_RSI_DATA4 (P_DEFINED | P_IDENT(GPIO_PG12) | P_FUNCT(1)) +#define P_RSI_DATA5 (P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(1)) +#define P_RSI_DATA6 (P_DEFINED | P_IDENT(GPIO_PG14) | P_FUNCT(1)) +#define P_RSI_DATA7 (P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(1)) +#define P_RSI_CMD (P_DEFINED | P_IDENT(GPIO_PG10) | P_FUNCT(1)) +#define P_RSI_CLK (P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(1)) + +/* ACM */ +#define P_ACM_SE_DIFF (P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(0)) +#define P_ACM_RANGE (P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(0)) +#define P_ACM_A0 (P_DEFINED | P_IDENT(GPIO_PH2) | P_FUNCT(0)) +#define P_ACM_A1 (P_DEFINED | P_IDENT(GPIO_PH1) | P_FUNCT(0)) +#define P_ACM_A2 (P_DEFINED | P_IDENT(GPIO_PH0) | P_FUNCT(0)) + +#endif /* _MACH_PORTMUX_H_ */ diff --git a/arch/blackfin/include/asm/mach-bf506/ports.h b/arch/blackfin/include/asm/mach-bf506/ports.h new file mode 100644 index 0000000..f1e9cc0 --- /dev/null +++ b/arch/blackfin/include/asm/mach-bf506/ports.h @@ -0,0 +1,59 @@ +/* + * Port Masks + */ + +#ifndef __BFIN_PERIPHERAL_PORT__ +#define __BFIN_PERIPHERAL_PORT__ + +/* PORTx_MUX Masks */ +#define PORT_x_MUX_0_MASK 0x0003 +#define PORT_x_MUX_1_MASK 0x000C +#define PORT_x_MUX_2_MASK 0x0030 +#define PORT_x_MUX_3_MASK 0x00C0 +#define PORT_x_MUX_4_MASK 0x0300 +#define PORT_x_MUX_5_MASK 0x0C00 +#define PORT_x_MUX_6_MASK 0x3000 +#define PORT_x_MUX_7_MASK 0xC000 + +#define PORT_x_MUX_FUNC_1 (0x0) +#define PORT_x_MUX_FUNC_2 (0x1) +#define PORT_x_MUX_FUNC_3 (0x2) +#define PORT_x_MUX_FUNC_4 (0x3) +#define PORT_x_MUX_0_FUNC_1 (PORT_x_MUX_FUNC_1 << 0) +#define PORT_x_MUX_0_FUNC_2 (PORT_x_MUX_FUNC_2 << 0) +#define PORT_x_MUX_0_FUNC_3 (PORT_x_MUX_FUNC_3 << 0) +#define PORT_x_MUX_0_FUNC_4 (PORT_x_MUX_FUNC_4 << 0) +#define PORT_x_MUX_1_FUNC_1 (PORT_x_MUX_FUNC_1 << 2) +#define PORT_x_MUX_1_FUNC_2 (PORT_x_MUX_FUNC_2 << 2) +#define PORT_x_MUX_1_FUNC_3 (PORT_x_MUX_FUNC_3 << 2) +#define PORT_x_MUX_1_FUNC_4 (PORT_x_MUX_FUNC_4 << 2) +#define PORT_x_MUX_2_FUNC_1 (PORT_x_MUX_FUNC_1 << 4) +#define PORT_x_MUX_2_FUNC_2 (PORT_x_MUX_FUNC_2 << 4) +#define PORT_x_MUX_2_FUNC_3 (PORT_x_MUX_FUNC_3 << 4) +#define PORT_x_MUX_2_FUNC_4 (PORT_x_MUX_FUNC_4 << 4) +#define PORT_x_MUX_3_FUNC_1 (PORT_x_MUX_FUNC_1 << 6) +#define PORT_x_MUX_3_FUNC_2 (PORT_x_MUX_FUNC_2 << 6) +#define PORT_x_MUX_3_FUNC_3 (PORT_x_MUX_FUNC_3 << 6) +#define PORT_x_MUX_3_FUNC_4 (PORT_x_MUX_FUNC_4 << 6) +#define PORT_x_MUX_4_FUNC_1 (PORT_x_MUX_FUNC_1 << 8) +#define PORT_x_MUX_4_FUNC_2 (PORT_x_MUX_FUNC_2 << 8) +#define PORT_x_MUX_4_FUNC_3 (PORT_x_MUX_FUNC_3 << 8) +#define PORT_x_MUX_4_FUNC_4 (PORT_x_MUX_FUNC_4 << 8) +#define PORT_x_MUX_5_FUNC_1 (PORT_x_MUX_FUNC_1 << 10) +#define PORT_x_MUX_5_FUNC_2 (PORT_x_MUX_FUNC_2 << 10) +#define PORT_x_MUX_5_FUNC_3 (PORT_x_MUX_FUNC_3 << 10) +#define PORT_x_MUX_5_FUNC_4 (PORT_x_MUX_FUNC_4 << 10) +#define PORT_x_MUX_6_FUNC_1 (PORT_x_MUX_FUNC_1 << 12) +#define PORT_x_MUX_6_FUNC_2 (PORT_x_MUX_FUNC_2 << 12) +#define PORT_x_MUX_6_FUNC_3 (PORT_x_MUX_FUNC_3 << 12) +#define PORT_x_MUX_6_FUNC_4 (PORT_x_MUX_FUNC_4 << 12) +#define PORT_x_MUX_7_FUNC_1 (PORT_x_MUX_FUNC_1 << 14) +#define PORT_x_MUX_7_FUNC_2 (PORT_x_MUX_FUNC_2 << 14) +#define PORT_x_MUX_7_FUNC_3 (PORT_x_MUX_FUNC_3 << 14) +#define PORT_x_MUX_7_FUNC_4 (PORT_x_MUX_FUNC_4 << 14) + +#include "../mach-common/bits/ports-f.h" +#include "../mach-common/bits/ports-g.h" +#include "../mach-common/bits/ports-h.h" + +#endif diff --git a/arch/blackfin/include/asm/mach-bf518/BF512_def.h b/arch/blackfin/include/asm/mach-bf518/BF512_def.h index abc88ca..bbaf22f 100644 --- a/arch/blackfin/include/asm/mach-bf518/BF512_def.h +++ b/arch/blackfin/include/asm/mach-bf518/BF512_def.h @@ -513,11 +513,5 @@ #define L1_INST_SRAM 0xFFA00000 /* 0xFFA00000 -> 0xFFA07FFF Instruction Bank A SRAM */ #define L1_INST_SRAM_SIZE (0xFFA07FFF - 0xFFA00000 + 1) #define L1_INST_SRAM_END (L1_INST_SRAM + L1_INST_SRAM_SIZE) -#define L1_SRAM_SCRATCH 0xFFB00000 /* 0xFFB00000 -> 0xFFB00FFF Scratchpad SRAM */ -#define L1_SRAM_SCRATCH_SIZE (0xFFB00FFF - 0xFFB00000 + 1) -#define L1_SRAM_SCRATCH_END (L1_SRAM_SCRATCH + L1_SRAM_SCRATCH_SIZE) -#define SYSMMR_BASE 0xFFC00000 /* 0xFFC00000 -> 0xFFFFFFFF MMR registers */ -#define SYSMMR_BASE_SIZE (0xFFFFFFFF - 0xFFC00000 + 1) -#define SYSMMR_BASE_END (SYSMMR_BASE + SYSMMR_BASE_SIZE) #endif /* __BFIN_DEF_ADSP_BF512_proc__ */ diff --git a/arch/blackfin/include/asm/mach-bf527/ADSP-EDN-BF52x-extended_cdef.h b/arch/blackfin/include/asm/mach-bf527/ADSP-EDN-BF52x-extended_cdef.h deleted file mode 100644 index 5381bf0..0000000 --- a/arch/blackfin/include/asm/mach-bf527/ADSP-EDN-BF52x-extended_cdef.h +++ /dev/null @@ -1,994 +0,0 @@ -/* DO NOT EDIT THIS FILE - * Automatically generated by generate-cdef-headers.xsl - * DO NOT EDIT THIS FILE - */ - -#ifndef __BFIN_CDEF_ADSP_EDN_BF52x_extended__ -#define __BFIN_CDEF_ADSP_EDN_BF52x_extended__ - -#define bfin_read_SIC_RVECT() bfin_read16(SIC_RVECT) -#define bfin_write_SIC_RVECT(val) bfin_write16(SIC_RVECT, val) -#define bfin_read_SIC_IMASK0() bfin_read32(SIC_IMASK0) -#define bfin_write_SIC_IMASK0(val) bfin_write32(SIC_IMASK0, val) -#define bfin_read_SIC_IAR0() bfin_read32(SIC_IAR0) -#define bfin_write_SIC_IAR0(val) bfin_write32(SIC_IAR0, val) -#define bfin_read_SIC_IAR1() bfin_read32(SIC_IAR1) -#define bfin_write_SIC_IAR1(val) bfin_write32(SIC_IAR1, val) -#define bfin_read_SIC_IAR2() bfin_read32(SIC_IAR2) -#define bfin_write_SIC_IAR2(val) bfin_write32(SIC_IAR2, val) -#define bfin_read_SIC_IAR3() bfin_read32(SIC_IAR3) -#define bfin_write_SIC_IAR3(val) bfin_write32(SIC_IAR3, val) -#define bfin_read_SIC_ISR0() bfin_read32(SIC_ISR0) -#define bfin_write_SIC_ISR0(val) bfin_write32(SIC_ISR0, val) -#define bfin_read_SIC_IWR0() bfin_read32(SIC_IWR0) -#define bfin_write_SIC_IWR0(val) bfin_write32(SIC_IWR0, val) -#define bfin_read_SIC_IMASK1() bfin_read32(SIC_IMASK1) -#define bfin_write_SIC_IMASK1(val) bfin_write32(SIC_IMASK1, val) -#define bfin_read_SIC_IAR4() bfin_read32(SIC_IAR4) -#define bfin_write_SIC_IAR4(val) bfin_write32(SIC_IAR4, val) -#define bfin_read_SIC_IAR5() bfin_read32(SIC_IAR5) -#define bfin_write_SIC_IAR5(val) bfin_write32(SIC_IAR5, val) -#define bfin_read_SIC_IAR6() bfin_read32(SIC_IAR6) -#define bfin_write_SIC_IAR6(val) bfin_write32(SIC_IAR6, val) -#define bfin_read_SIC_IAR7() bfin_read32(SIC_IAR7) -#define bfin_write_SIC_IAR7(val) bfin_write32(SIC_IAR7, val) -#define bfin_read_SIC_ISR1() bfin_read32(SIC_ISR1) -#define bfin_write_SIC_ISR1(val) bfin_write32(SIC_ISR1, val) -#define bfin_read_SIC_IWR1() bfin_read32(SIC_IWR1) -#define bfin_write_SIC_IWR1(val) bfin_write32(SIC_IWR1, val) -#define bfin_read_WDOG_CTL() bfin_read16(WDOG_CTL) -#define bfin_write_WDOG_CTL(val) bfin_write16(WDOG_CTL, val) -#define bfin_read_WDOG_CNT() bfin_read32(WDOG_CNT) -#define bfin_write_WDOG_CNT(val) bfin_write32(WDOG_CNT, val) -#define bfin_read_WDOG_STAT() bfin_read32(WDOG_STAT) -#define bfin_write_WDOG_STAT(val) bfin_write32(WDOG_STAT, val) -#define bfin_read_RTC_STAT() bfin_read32(RTC_STAT) -#define bfin_write_RTC_STAT(val) bfin_write32(RTC_STAT, val) -#define bfin_read_RTC_ICTL() bfin_read16(RTC_ICTL) -#define bfin_write_RTC_ICTL(val) bfin_write16(RTC_ICTL, val) -#define bfin_read_RTC_ISTAT() bfin_read16(RTC_ISTAT) -#define bfin_write_RTC_ISTAT(val) bfin_write16(RTC_ISTAT, val) -#define bfin_read_RTC_SWCNT() bfin_read16(RTC_SWCNT) -#define bfin_write_RTC_SWCNT(val) bfin_write16(RTC_SWCNT, val) -#define bfin_read_RTC_ALARM() bfin_read32(RTC_ALARM) -#define bfin_write_RTC_ALARM(val) bfin_write32(RTC_ALARM, val) -#define bfin_read_RTC_PREN() bfin_read16(RTC_PREN) -#define bfin_write_RTC_PREN(val) bfin_write16(RTC_PREN, val) -#define bfin_read_UART0_THR() bfin_read16(UART0_THR) -#define bfin_write_UART0_THR(val) bfin_write16(UART0_THR, val) -#define bfin_read_UART0_RBR() bfin_read16(UART0_RBR) -#define bfin_write_UART0_RBR(val) bfin_write16(UART0_RBR, val) -#define bfin_read_UART0_DLL() bfin_read16(UART0_DLL) -#define bfin_write_UART0_DLL(val) bfin_write16(UART0_DLL, val) -#define bfin_read_UART0_IER() bfin_read16(UART0_IER) -#define bfin_write_UART0_IER(val) bfin_write16(UART0_IER, val) -#define bfin_read_UART0_DLH() bfin_read16(UART0_DLH) -#define bfin_write_UART0_DLH(val) bfin_write16(UART0_DLH, val) -#define bfin_read_UART0_IIR() bfin_read16(UART0_IIR) -#define bfin_write_UART0_IIR(val) bfin_write16(UART0_IIR, val) -#define bfin_read_UART0_LCR() bfin_read16(UART0_LCR) -#define bfin_write_UART0_LCR(val) bfin_write16(UART0_LCR, val) -#define bfin_read_UART0_MCR() bfin_read16(UART0_MCR) -#define bfin_write_UART0_MCR(val) bfin_write16(UART0_MCR, val) -#define bfin_read_UART0_LSR() bfin_read16(UART0_LSR) -#define bfin_write_UART0_LSR(val) bfin_write16(UART0_LSR, val) -#define bfin_read_UART0_MSR() bfin_read16(UART0_MSR) -#define bfin_write_UART0_MSR(val) bfin_write16(UART0_MSR, val) -#define bfin_read_UART0_SCR() bfin_read16(UART0_SCR) -#define bfin_write_UART0_SCR(val) bfin_write16(UART0_SCR, val) -#define bfin_read_UART0_GCTL() bfin_read16(UART0_GCTL) -#define bfin_write_UART0_GCTL(val) bfin_write16(UART0_GCTL, val) -#define bfin_read_SPI_CTL() bfin_read16(SPI_CTL) -#define bfin_write_SPI_CTL(val) bfin_write16(SPI_CTL, val) -#define bfin_read_SPI_FLG() bfin_read16(SPI_FLG) -#define bfin_write_SPI_FLG(val) bfin_write16(SPI_FLG, val) -#define bfin_read_SPI_STAT() bfin_read16(SPI_STAT) -#define bfin_write_SPI_STAT(val) bfin_write16(SPI_STAT, val) -#define bfin_read_SPI_TDBR() bfin_read16(SPI_TDBR) -#define bfin_write_SPI_TDBR(val) bfin_write16(SPI_TDBR, val) -#define bfin_read_SPI_RDBR() bfin_read16(SPI_RDBR) -#define bfin_write_SPI_RDBR(val) bfin_write16(SPI_RDBR, val) -#define bfin_read_SPI_BAUD() bfin_read16(SPI_BAUD) -#define bfin_write_SPI_BAUD(val) bfin_write16(SPI_BAUD, val) -#define bfin_read_SPI_SHADOW() bfin_read16(SPI_SHADOW) -#define bfin_write_SPI_SHADOW(val) bfin_write16(SPI_SHADOW, val) -#define bfin_read_TIMER0_CONFIG() bfin_read16(TIMER0_CONFIG) -#define bfin_write_TIMER0_CONFIG(val) bfin_write16(TIMER0_CONFIG, val) -#define bfin_read_TIMER0_COUNTER() bfin_read32(TIMER0_COUNTER) -#define bfin_write_TIMER0_COUNTER(val) bfin_write32(TIMER0_COUNTER, val) -#define bfin_read_TIMER0_PERIOD() bfin_read32(TIMER0_PERIOD) -#define bfin_write_TIMER0_PERIOD(val) bfin_write32(TIMER0_PERIOD, val) -#define bfin_read_TIMER0_WIDTH() bfin_read32(TIMER0_WIDTH) -#define bfin_write_TIMER0_WIDTH(val) bfin_write32(TIMER0_WIDTH, val) -#define bfin_read_TIMER1_CONFIG() bfin_read16(TIMER1_CONFIG) -#define bfin_write_TIMER1_CONFIG(val) bfin_write16(TIMER1_CONFIG, val) -#define bfin_read_TIMER1_COUNTER() bfin_read32(TIMER1_COUNTER) -#define bfin_write_TIMER1_COUNTER(val) bfin_write32(TIMER1_COUNTER, val) -#define bfin_read_TIMER1_PERIOD() bfin_read32(TIMER1_PERIOD) -#define bfin_write_TIMER1_PERIOD(val) bfin_write32(TIMER1_PERIOD, val) -#define bfin_read_TIMER1_WIDTH() bfin_read32(TIMER1_WIDTH) -#define bfin_write_TIMER1_WIDTH(val) bfin_write32(TIMER1_WIDTH, val) -#define bfin_read_TIMER2_CONFIG() bfin_read16(TIMER2_CONFIG) -#define bfin_write_TIMER2_CONFIG(val) bfin_write16(TIMER2_CONFIG, val) -#define bfin_read_TIMER2_COUNTER() bfin_read32(TIMER2_COUNTER) -#define bfin_write_TIMER2_COUNTER(val) bfin_write32(TIMER2_COUNTER, val) -#define bfin_read_TIMER2_PERIOD() bfin_read32(TIMER2_PERIOD) -#define bfin_write_TIMER2_PERIOD(val) bfin_write32(TIMER2_PERIOD, val) -#define bfin_read_TIMER2_WIDTH() bfin_read32(TIMER2_WIDTH) -#define bfin_write_TIMER2_WIDTH(val) bfin_write32(TIMER2_WIDTH, val) -#define bfin_read_TIMER3_CONFIG() bfin_read16(TIMER3_CONFIG) -#define bfin_write_TIMER3_CONFIG(val) bfin_write16(TIMER3_CONFIG, val) -#define bfin_read_TIMER3_COUNTER() bfin_read32(TIMER3_COUNTER) -#define bfin_write_TIMER3_COUNTER(val) bfin_write32(TIMER3_COUNTER, val) -#define bfin_read_TIMER3_PERIOD() bfin_read32(TIMER3_PERIOD) -#define bfin_write_TIMER3_PERIOD(val) bfin_write32(TIMER3_PERIOD, val) -#define bfin_read_TIMER3_WIDTH() bfin_read32(TIMER3_WIDTH) -#define bfin_write_TIMER3_WIDTH(val) bfin_write32(TIMER3_WIDTH, val) -#define bfin_read_TIMER4_CONFIG() bfin_read16(TIMER4_CONFIG) -#define bfin_write_TIMER4_CONFIG(val) bfin_write16(TIMER4_CONFIG, val) -#define bfin_read_TIMER4_COUNTER() bfin_read32(TIMER4_COUNTER) -#define bfin_write_TIMER4_COUNTER(val) bfin_write32(TIMER4_COUNTER, val) -#define bfin_read_TIMER4_PERIOD() bfin_read32(TIMER4_PERIOD) -#define bfin_write_TIMER4_PERIOD(val) bfin_write32(TIMER4_PERIOD, val) -#define bfin_read_TIMER4_WIDTH() bfin_read32(TIMER4_WIDTH) -#define bfin_write_TIMER4_WIDTH(val) bfin_write32(TIMER4_WIDTH, val) -#define bfin_read_TIMER5_CONFIG() bfin_read16(TIMER5_CONFIG) -#define bfin_write_TIMER5_CONFIG(val) bfin_write16(TIMER5_CONFIG, val) -#define bfin_read_TIMER5_COUNTER() bfin_read32(TIMER5_COUNTER) -#define bfin_write_TIMER5_COUNTER(val) bfin_write32(TIMER5_COUNTER, val) -#define bfin_read_TIMER5_PERIOD() bfin_read32(TIMER5_PERIOD) -#define bfin_write_TIMER5_PERIOD(val) bfin_write32(TIMER5_PERIOD, val) -#define bfin_read_TIMER5_WIDTH() bfin_read32(TIMER5_WIDTH) -#define bfin_write_TIMER5_WIDTH(val) bfin_write32(TIMER5_WIDTH, val) -#define bfin_read_TIMER6_CONFIG() bfin_read16(TIMER6_CONFIG) -#define bfin_write_TIMER6_CONFIG(val) bfin_write16(TIMER6_CONFIG, val) -#define bfin_read_TIMER6_COUNTER() bfin_read32(TIMER6_COUNTER) -#define bfin_write_TIMER6_COUNTER(val) bfin_write32(TIMER6_COUNTER, val) -#define bfin_read_TIMER6_PERIOD() bfin_read32(TIMER6_PERIOD) -#define bfin_write_TIMER6_PERIOD(val) bfin_write32(TIMER6_PERIOD, val) -#define bfin_read_TIMER6_WIDTH() bfin_read32(TIMER6_WIDTH) -#define bfin_write_TIMER6_WIDTH(val) bfin_write32(TIMER6_WIDTH, val) -#define bfin_read_TIMER7_CONFIG() bfin_read16(TIMER7_CONFIG) -#define bfin_write_TIMER7_CONFIG(val) bfin_write16(TIMER7_CONFIG, val) -#define bfin_read_TIMER7_COUNTER() bfin_read32(TIMER7_COUNTER) -#define bfin_write_TIMER7_COUNTER(val) bfin_write32(TIMER7_COUNTER, val) -#define bfin_read_TIMER7_PERIOD() bfin_read32(TIMER7_PERIOD) -#define bfin_write_TIMER7_PERIOD(val) bfin_write32(TIMER7_PERIOD, val) -#define bfin_read_TIMER7_WIDTH() bfin_read32(TIMER7_WIDTH) -#define bfin_write_TIMER7_WIDTH(val) bfin_write32(TIMER7_WIDTH, val) -#define bfin_read_TIMER_ENABLE() bfin_read16(TIMER_ENABLE) -#define bfin_write_TIMER_ENABLE(val) bfin_write16(TIMER_ENABLE, val) -#define bfin_read_TIMER_DISABLE() bfin_read16(TIMER_DISABLE) -#define bfin_write_TIMER_DISABLE(val) bfin_write16(TIMER_DISABLE, val) -#define bfin_read_TIMER_STATUS() bfin_read32(TIMER_STATUS) -#define bfin_write_TIMER_STATUS(val) bfin_write32(TIMER_STATUS, val) -#define bfin_read_PORTFIO() bfin_read16(PORTFIO) -#define bfin_write_PORTFIO(val) bfin_write16(PORTFIO, val) -#define bfin_read_PORTFIO_CLEAR() bfin_read16(PORTFIO_CLEAR) -#define bfin_write_PORTFIO_CLEAR(val) bfin_write16(PORTFIO_CLEAR, val) -#define bfin_read_PORTFIO_SET() bfin_read16(PORTFIO_SET) -#define bfin_write_PORTFIO_SET(val) bfin_write16(PORTFIO_SET, val) -#define bfin_read_PORTFIO_TOGGLE() bfin_read16(PORTFIO_TOGGLE) -#define bfin_write_PORTFIO_TOGGLE(val) bfin_write16(PORTFIO_TOGGLE, val) -#define bfin_read_PORTFIO_MASKA() bfin_read16(PORTFIO_MASKA) -#define bfin_write_PORTFIO_MASKA(val) bfin_write16(PORTFIO_MASKA, val) -#define bfin_read_PORTFIO_MASKA_CLEAR() bfin_read16(PORTFIO_MASKA_CLEAR) -#define bfin_write_PORTFIO_MASKA_CLEAR(val) bfin_write16(PORTFIO_MASKA_CLEAR, val) -#define bfin_read_PORTFIO_MASKA_SET() bfin_read16(PORTFIO_MASKA_SET) -#define bfin_write_PORTFIO_MASKA_SET(val) bfin_write16(PORTFIO_MASKA_SET, val) -#define bfin_read_PORTFIO_MASKA_TOGGLE() bfin_read16(PORTFIO_MASKA_TOGGLE) -#define bfin_write_PORTFIO_MASKA_TOGGLE(val) bfin_write16(PORTFIO_MASKA_TOGGLE, val) -#define bfin_read_PORTFIO_MASKB() bfin_read16(PORTFIO_MASKB) -#define bfin_write_PORTFIO_MASKB(val) bfin_write16(PORTFIO_MASKB, val) -#define bfin_read_PORTFIO_MASKB_CLEAR() bfin_read16(PORTFIO_MASKB_CLEAR) -#define bfin_write_PORTFIO_MASKB_CLEAR(val) bfin_write16(PORTFIO_MASKB_CLEAR, val) -#define bfin_read_PORTFIO_MASKB_SET() bfin_read16(PORTFIO_MASKB_SET) -#define bfin_write_PORTFIO_MASKB_SET(val) bfin_write16(PORTFIO_MASKB_SET, val) -#define bfin_read_PORTFIO_MASKB_TOGGLE() bfin_read16(PORTFIO_MASKB_TOGGLE) -#define bfin_write_PORTFIO_MASKB_TOGGLE(val) bfin_write16(PORTFIO_MASKB_TOGGLE, val) -#define bfin_read_PORTFIO_DIR() bfin_read16(PORTFIO_DIR) -#define bfin_write_PORTFIO_DIR(val) bfin_write16(PORTFIO_DIR, val) -#define bfin_read_PORTFIO_POLAR() bfin_read16(PORTFIO_POLAR) -#define bfin_write_PORTFIO_POLAR(val) bfin_write16(PORTFIO_POLAR, val) -#define bfin_read_PORTFIO_EDGE() bfin_read16(PORTFIO_EDGE) -#define bfin_write_PORTFIO_EDGE(val) bfin_write16(PORTFIO_EDGE, val) -#define bfin_read_PORTFIO_BOTH() bfin_read16(PORTFIO_BOTH) -#define bfin_write_PORTFIO_BOTH(val) bfin_write16(PORTFIO_BOTH, val) -#define bfin_read_PORTFIO_INEN() bfin_read16(PORTFIO_INEN) -#define bfin_write_PORTFIO_INEN(val) bfin_write16(PORTFIO_INEN, val) -#define bfin_read_SPORT0_TCR1() bfin_read16(SPORT0_TCR1) -#define bfin_write_SPORT0_TCR1(val) bfin_write16(SPORT0_TCR1, val) -#define bfin_read_SPORT0_TCR2() bfin_read16(SPORT0_TCR2) -#define bfin_write_SPORT0_TCR2(val) bfin_write16(SPORT0_TCR2, val) -#define bfin_read_SPORT0_TCLKDIV() bfin_read16(SPORT0_TCLKDIV) -#define bfin_write_SPORT0_TCLKDIV(val) bfin_write16(SPORT0_TCLKDIV, val) -#define bfin_read_SPORT0_TFSDIV() bfin_read16(SPORT0_TFSDIV) -#define bfin_write_SPORT0_TFSDIV(val) bfin_write16(SPORT0_TFSDIV, val) -#define bfin_write_SPORT0_TX(val) bfin_write32(SPORT0_TX, val) -#define bfin_read_SPORT0_RX() bfin_read32(SPORT0_RX) -#define bfin_write_SPORT0_RX(val) bfin_write32(SPORT0_RX, val) -#define bfin_read_SPORT0_RCR1() bfin_read16(SPORT0_RCR1) -#define bfin_write_SPORT0_RCR1(val) bfin_write16(SPORT0_RCR1, val) -#define bfin_read_SPORT0_RCR2() bfin_read16(SPORT0_RCR2) -#define bfin_write_SPORT0_RCR2(val) bfin_write16(SPORT0_RCR2, val) -#define bfin_read_SPORT0_RCLKDIV() bfin_read16(SPORT0_RCLKDIV) -#define bfin_write_SPORT0_RCLKDIV(val) bfin_write16(SPORT0_RCLKDIV, val) -#define bfin_read_SPORT0_RFSDIV() bfin_read16(SPORT0_RFSDIV) -#define bfin_write_SPORT0_RFSDIV(val) bfin_write16(SPORT0_RFSDIV, val) -#define bfin_read_SPORT0_STAT() bfin_read16(SPORT0_STAT) -#define bfin_write_SPORT0_STAT(val) bfin_write16(SPORT0_STAT, val) -#define bfin_read_SPORT0_CHNL() bfin_read16(SPORT0_CHNL) -#define bfin_write_SPORT0_CHNL(val) bfin_write16(SPORT0_CHNL, val) -#define bfin_read_SPORT0_MCMC1() bfin_read16(SPORT0_MCMC1) -#define bfin_write_SPORT0_MCMC1(val) bfin_write16(SPORT0_MCMC1, val) -#define bfin_read_SPORT0_MCMC2() bfin_read16(SPORT0_MCMC2) -#define bfin_write_SPORT0_MCMC2(val) bfin_write16(SPORT0_MCMC2, val) -#define bfin_read_SPORT0_MTCS0() bfin_read32(SPORT0_MTCS0) -#define bfin_write_SPORT0_MTCS0(val) bfin_write32(SPORT0_MTCS0, val) -#define bfin_read_SPORT0_MTCS1() bfin_read32(SPORT0_MTCS1) -#define bfin_write_SPORT0_MTCS1(val) bfin_write32(SPORT0_MTCS1, val) -#define bfin_read_SPORT0_MTCS2() bfin_read32(SPORT0_MTCS2) -#define bfin_write_SPORT0_MTCS2(val) bfin_write32(SPORT0_MTCS2, val) -#define bfin_read_SPORT0_MTCS3() bfin_read32(SPORT0_MTCS3) -#define bfin_write_SPORT0_MTCS3(val) bfin_write32(SPORT0_MTCS3, val) -#define bfin_read_SPORT0_MRCS0() bfin_read32(SPORT0_MRCS0) -#define bfin_write_SPORT0_MRCS0(val) bfin_write32(SPORT0_MRCS0, val) -#define bfin_read_SPORT0_MRCS1() bfin_read32(SPORT0_MRCS1) -#define bfin_write_SPORT0_MRCS1(val) bfin_write32(SPORT0_MRCS1, val) -#define bfin_read_SPORT0_MRCS2() bfin_read32(SPORT0_MRCS2) -#define bfin_write_SPORT0_MRCS2(val) bfin_write32(SPORT0_MRCS2, val) -#define bfin_read_SPORT0_MRCS3() bfin_read32(SPORT0_MRCS3) -#define bfin_write_SPORT0_MRCS3(val) bfin_write32(SPORT0_MRCS3, val) -#define bfin_read_SPORT1_TCR1() bfin_read16(SPORT1_TCR1) -#define bfin_write_SPORT1_TCR1(val) bfin_write16(SPORT1_TCR1, val) -#define bfin_read_SPORT1_TCR2() bfin_read16(SPORT1_TCR2) -#define bfin_write_SPORT1_TCR2(val) bfin_write16(SPORT1_TCR2, val) -#define bfin_read_SPORT1_TCLKDIV() bfin_read16(SPORT1_TCLKDIV) -#define bfin_write_SPORT1_TCLKDIV(val) bfin_write16(SPORT1_TCLKDIV, val) -#define bfin_read_SPORT1_TFSDIV() bfin_read16(SPORT1_TFSDIV) -#define bfin_write_SPORT1_TFSDIV(val) bfin_write16(SPORT1_TFSDIV, val) -#define bfin_write_SPORT1_TX(val) bfin_write32(SPORT1_TX, val) -#define bfin_read_SPORT1_RX() bfin_read32(SPORT1_RX) -#define bfin_write_SPORT1_RX(val) bfin_write32(SPORT1_RX, val) -#define bfin_read_SPORT1_RCR1() bfin_read16(SPORT1_RCR1) -#define bfin_write_SPORT1_RCR1(val) bfin_write16(SPORT1_RCR1, val) -#define bfin_read_SPORT1_RCR2() bfin_read16(SPORT1_RCR2) -#define bfin_write_SPORT1_RCR2(val) bfin_write16(SPORT1_RCR2, val) -#define bfin_read_SPORT1_RCLKDIV() bfin_read16(SPORT1_RCLKDIV) -#define bfin_write_SPORT1_RCLKDIV(val) bfin_write16(SPORT1_RCLKDIV, val) -#define bfin_read_SPORT1_RFSDIV() bfin_read16(SPORT1_RFSDIV) -#define bfin_write_SPORT1_RFSDIV(val) bfin_write16(SPORT1_RFSDIV, val) -#define bfin_read_SPORT1_STAT() bfin_read16(SPORT1_STAT) -#define bfin_write_SPORT1_STAT(val) bfin_write16(SPORT1_STAT, val) -#define bfin_read_SPORT1_CHNL() bfin_read16(SPORT1_CHNL) -#define bfin_write_SPORT1_CHNL(val) bfin_write16(SPORT1_CHNL, val) -#define bfin_read_SPORT1_MCMC1() bfin_read16(SPORT1_MCMC1) -#define bfin_write_SPORT1_MCMC1(val) bfin_write16(SPORT1_MCMC1, val) -#define bfin_read_SPORT1_MCMC2() bfin_read16(SPORT1_MCMC2) -#define bfin_write_SPORT1_MCMC2(val) bfin_write16(SPORT1_MCMC2, val) -#define bfin_read_SPORT1_MTCS0() bfin_read32(SPORT1_MTCS0) -#define bfin_write_SPORT1_MTCS0(val) bfin_write32(SPORT1_MTCS0, val) -#define bfin_read_SPORT1_MTCS1() bfin_read32(SPORT1_MTCS1) -#define bfin_write_SPORT1_MTCS1(val) bfin_write32(SPORT1_MTCS1, val) -#define bfin_read_SPORT1_MTCS2() bfin_read32(SPORT1_MTCS2) -#define bfin_write_SPORT1_MTCS2(val) bfin_write32(SPORT1_MTCS2, val) -#define bfin_read_SPORT1_MTCS3() bfin_read32(SPORT1_MTCS3) -#define bfin_write_SPORT1_MTCS3(val) bfin_write32(SPORT1_MTCS3, val) -#define bfin_read_SPORT1_MRCS0() bfin_read32(SPORT1_MRCS0) -#define bfin_write_SPORT1_MRCS0(val) bfin_write32(SPORT1_MRCS0, val) -#define bfin_read_SPORT1_MRCS1() bfin_read32(SPORT1_MRCS1) -#define bfin_write_SPORT1_MRCS1(val) bfin_write32(SPORT1_MRCS1, val) -#define bfin_read_SPORT1_MRCS2() bfin_read32(SPORT1_MRCS2) -#define bfin_write_SPORT1_MRCS2(val) bfin_write32(SPORT1_MRCS2, val) -#define bfin_read_SPORT1_MRCS3() bfin_read32(SPORT1_MRCS3) -#define bfin_write_SPORT1_MRCS3(val) bfin_write32(SPORT1_MRCS3, val) -#define bfin_read_EBIU_AMGCTL() bfin_read16(EBIU_AMGCTL) -#define bfin_write_EBIU_AMGCTL(val) bfin_write16(EBIU_AMGCTL, val) -#define bfin_read_EBIU_AMBCTL0() bfin_read32(EBIU_AMBCTL0) -#define bfin_write_EBIU_AMBCTL0(val) bfin_write32(EBIU_AMBCTL0, val) -#define bfin_read_EBIU_AMBCTL1() bfin_read32(EBIU_AMBCTL1) -#define bfin_write_EBIU_AMBCTL1(val) bfin_write32(EBIU_AMBCTL1, val) -#define bfin_read_EBIU_SDGCTL() bfin_read32(EBIU_SDGCTL) -#define bfin_write_EBIU_SDGCTL(val) bfin_write32(EBIU_SDGCTL, val) -#define bfin_read_EBIU_SDBCTL() bfin_read16(EBIU_SDBCTL) -#define bfin_write_EBIU_SDBCTL(val) bfin_write16(EBIU_SDBCTL, val) -#define bfin_read_EBIU_SDRRC() bfin_read16(EBIU_SDRRC) -#define bfin_write_EBIU_SDRRC(val) bfin_write16(EBIU_SDRRC, val) -#define bfin_read_EBIU_SDSTAT() bfin_read16(EBIU_SDSTAT) -#define bfin_write_EBIU_SDSTAT(val) bfin_write16(EBIU_SDSTAT, val) -#define bfin_read_DMA0_NEXT_DESC_PTR() bfin_readPTR(DMA0_NEXT_DESC_PTR) -#define bfin_write_DMA0_NEXT_DESC_PTR(val) bfin_writePTR(DMA0_NEXT_DESC_PTR, val) -#define bfin_read_DMA0_START_ADDR() bfin_readPTR(DMA0_START_ADDR) -#define bfin_write_DMA0_START_ADDR(val) bfin_writePTR(DMA0_START_ADDR, val) -#define bfin_read_DMA0_CONFIG() bfin_read16(DMA0_CONFIG) -#define bfin_write_DMA0_CONFIG(val) bfin_write16(DMA0_CONFIG, val) -#define bfin_read_DMA0_X_COUNT() bfin_read16(DMA0_X_COUNT) -#define bfin_write_DMA0_X_COUNT(val) bfin_write16(DMA0_X_COUNT, val) -#define bfin_read_DMA0_X_MODIFY() bfin_read16(DMA0_X_MODIFY) -#define bfin_write_DMA0_X_MODIFY(val) bfin_write16(DMA0_X_MODIFY, val) -#define bfin_read_DMA0_Y_COUNT() bfin_read16(DMA0_Y_COUNT) -#define bfin_write_DMA0_Y_COUNT(val) bfin_write16(DMA0_Y_COUNT, val) -#define bfin_read_DMA0_Y_MODIFY() bfin_read16(DMA0_Y_MODIFY) -#define bfin_write_DMA0_Y_MODIFY(val) bfin_write16(DMA0_Y_MODIFY, val) -#define bfin_read_DMA0_CURR_DESC_PTR() bfin_readPTR(DMA0_CURR_DESC_PTR) -#define bfin_write_DMA0_CURR_DESC_PTR(val) bfin_writePTR(DMA0_CURR_DESC_PTR, val) -#define bfin_read_DMA0_CURR_ADDR() bfin_readPTR(DMA0_CURR_ADDR) -#define bfin_write_DMA0_CURR_ADDR(val) bfin_writePTR(DMA0_CURR_ADDR, val) -#define bfin_read_DMA0_IRQ_STATUS() bfin_read16(DMA0_IRQ_STATUS) -#define bfin_write_DMA0_IRQ_STATUS(val) bfin_write16(DMA0_IRQ_STATUS, val) -#define bfin_read_DMA0_PERIPHERAL_MAP() bfin_read16(DMA0_PERIPHERAL_MAP) -#define bfin_write_DMA0_PERIPHERAL_MAP(val) bfin_write16(DMA0_PERIPHERAL_MAP, val) -#define bfin_read_DMA0_CURR_X_COUNT() bfin_read16(DMA0_CURR_X_COUNT) -#define bfin_write_DMA0_CURR_X_COUNT(val) bfin_write16(DMA0_CURR_X_COUNT, val) -#define bfin_read_DMA0_CURR_Y_COUNT() bfin_read16(DMA0_CURR_Y_COUNT) -#define bfin_write_DMA0_CURR_Y_COUNT(val) bfin_write16(DMA0_CURR_Y_COUNT, val) -#define bfin_read_DMA1_NEXT_DESC_PTR() bfin_readPTR(DMA1_NEXT_DESC_PTR) -#define bfin_write_DMA1_NEXT_DESC_PTR(val) bfin_writePTR(DMA1_NEXT_DESC_PTR, val) -#define bfin_read_DMA1_START_ADDR() bfin_readPTR(DMA1_START_ADDR) -#define bfin_write_DMA1_START_ADDR(val) bfin_writePTR(DMA1_START_ADDR, val) -#define bfin_read_DMA1_CONFIG() bfin_read16(DMA1_CONFIG) -#define bfin_write_DMA1_CONFIG(val) bfin_write16(DMA1_CONFIG, val) -#define bfin_read_DMA1_X_COUNT() bfin_read16(DMA1_X_COUNT) -#define bfin_write_DMA1_X_COUNT(val) bfin_write16(DMA1_X_COUNT, val) -#define bfin_read_DMA1_X_MODIFY() bfin_read16(DMA1_X_MODIFY) -#define bfin_write_DMA1_X_MODIFY(val) bfin_write16(DMA1_X_MODIFY, val) -#define bfin_read_DMA1_Y_COUNT() bfin_read16(DMA1_Y_COUNT) -#define bfin_write_DMA1_Y_COUNT(val) bfin_write16(DMA1_Y_COUNT, val) -#define bfin_read_DMA1_Y_MODIFY() bfin_read16(DMA1_Y_MODIFY) -#define bfin_write_DMA1_Y_MODIFY(val) bfin_write16(DMA1_Y_MODIFY, val) -#define bfin_read_DMA1_CURR_DESC_PTR() bfin_readPTR(DMA1_CURR_DESC_PTR) -#define bfin_write_DMA1_CURR_DESC_PTR(val) bfin_writePTR(DMA1_CURR_DESC_PTR, val) -#define bfin_read_DMA1_CURR_ADDR() bfin_readPTR(DMA1_CURR_ADDR) -#define bfin_write_DMA1_CURR_ADDR(val) bfin_writePTR(DMA1_CURR_ADDR, val) -#define bfin_read_DMA1_IRQ_STATUS() bfin_read16(DMA1_IRQ_STATUS) -#define bfin_write_DMA1_IRQ_STATUS(val) bfin_write16(DMA1_IRQ_STATUS, val) -#define bfin_read_DMA1_PERIPHERAL_MAP() bfin_read16(DMA1_PERIPHERAL_MAP) -#define bfin_write_DMA1_PERIPHERAL_MAP(val) bfin_write16(DMA1_PERIPHERAL_MAP, val) -#define bfin_read_DMA1_CURR_X_COUNT() bfin_read16(DMA1_CURR_X_COUNT) -#define bfin_write_DMA1_CURR_X_COUNT(val) bfin_write16(DMA1_CURR_X_COUNT, val) -#define bfin_read_DMA1_CURR_Y_COUNT() bfin_read16(DMA1_CURR_Y_COUNT) -#define bfin_write_DMA1_CURR_Y_COUNT(val) bfin_write16(DMA1_CURR_Y_COUNT, val) -#define bfin_read_DMA2_NEXT_DESC_PTR() bfin_readPTR(DMA2_NEXT_DESC_PTR) -#define bfin_write_DMA2_NEXT_DESC_PTR(val) bfin_writePTR(DMA2_NEXT_DESC_PTR, val) -#define bfin_read_DMA2_START_ADDR() bfin_readPTR(DMA2_START_ADDR) -#define bfin_write_DMA2_START_ADDR(val) bfin_writePTR(DMA2_START_ADDR, val) -#define bfin_read_DMA2_CONFIG() bfin_read16(DMA2_CONFIG) -#define bfin_write_DMA2_CONFIG(val) bfin_write16(DMA2_CONFIG, val) -#define bfin_read_DMA2_X_COUNT() bfin_read16(DMA2_X_COUNT) -#define bfin_write_DMA2_X_COUNT(val) bfin_write16(DMA2_X_COUNT, val) -#define bfin_read_DMA2_X_MODIFY() bfin_read16(DMA2_X_MODIFY) -#define bfin_write_DMA2_X_MODIFY(val) bfin_write16(DMA2_X_MODIFY, val) -#define bfin_read_DMA2_Y_COUNT() bfin_read16(DMA2_Y_COUNT) -#define bfin_write_DMA2_Y_COUNT(val) bfin_write16(DMA2_Y_COUNT, val) -#define bfin_read_DMA2_Y_MODIFY() bfin_read16(DMA2_Y_MODIFY) -#define bfin_write_DMA2_Y_MODIFY(val) bfin_write16(DMA2_Y_MODIFY, val) -#define bfin_read_DMA2_CURR_DESC_PTR() bfin_readPTR(DMA2_CURR_DESC_PTR) -#define bfin_write_DMA2_CURR_DESC_PTR(val) bfin_writePTR(DMA2_CURR_DESC_PTR, val) -#define bfin_read_DMA2_CURR_ADDR() bfin_readPTR(DMA2_CURR_ADDR) -#define bfin_write_DMA2_CURR_ADDR(val) bfin_writePTR(DMA2_CURR_ADDR, val) -#define bfin_read_DMA2_IRQ_STATUS() bfin_read16(DMA2_IRQ_STATUS) -#define bfin_write_DMA2_IRQ_STATUS(val) bfin_write16(DMA2_IRQ_STATUS, val) -#define bfin_read_DMA2_PERIPHERAL_MAP() bfin_read16(DMA2_PERIPHERAL_MAP) -#define bfin_write_DMA2_PERIPHERAL_MAP(val) bfin_write16(DMA2_PERIPHERAL_MAP, val) -#define bfin_read_DMA2_CURR_X_COUNT() bfin_read16(DMA2_CURR_X_COUNT) -#define bfin_write_DMA2_CURR_X_COUNT(val) bfin_write16(DMA2_CURR_X_COUNT, val) -#define bfin_read_DMA2_CURR_Y_COUNT() bfin_read16(DMA2_CURR_Y_COUNT) -#define bfin_write_DMA2_CURR_Y_COUNT(val) bfin_write16(DMA2_CURR_Y_COUNT, val) -#define bfin_read_DMA3_NEXT_DESC_PTR() bfin_readPTR(DMA3_NEXT_DESC_PTR) -#define bfin_write_DMA3_NEXT_DESC_PTR(val) bfin_writePTR(DMA3_NEXT_DESC_PTR, val) -#define bfin_read_DMA3_START_ADDR() bfin_readPTR(DMA3_START_ADDR) -#define bfin_write_DMA3_START_ADDR(val) bfin_writePTR(DMA3_START_ADDR, val) -#define bfin_read_DMA3_CONFIG() bfin_read16(DMA3_CONFIG) -#define bfin_write_DMA3_CONFIG(val) bfin_write16(DMA3_CONFIG, val) -#define bfin_read_DMA3_X_COUNT() bfin_read16(DMA3_X_COUNT) -#define bfin_write_DMA3_X_COUNT(val) bfin_write16(DMA3_X_COUNT, val) -#define bfin_read_DMA3_X_MODIFY() bfin_read16(DMA3_X_MODIFY) -#define bfin_write_DMA3_X_MODIFY(val) bfin_write16(DMA3_X_MODIFY, val) -#define bfin_read_DMA3_Y_COUNT() bfin_read16(DMA3_Y_COUNT) -#define bfin_write_DMA3_Y_COUNT(val) bfin_write16(DMA3_Y_COUNT, val) -#define bfin_read_DMA3_Y_MODIFY() bfin_read16(DMA3_Y_MODIFY) -#define bfin_write_DMA3_Y_MODIFY(val) bfin_write16(DMA3_Y_MODIFY, val) -#define bfin_read_DMA3_CURR_DESC_PTR() bfin_readPTR(DMA3_CURR_DESC_PTR) -#define bfin_write_DMA3_CURR_DESC_PTR(val) bfin_writePTR(DMA3_CURR_DESC_PTR, val) -#define bfin_read_DMA3_CURR_ADDR() bfin_readPTR(DMA3_CURR_ADDR) -#define bfin_write_DMA3_CURR_ADDR(val) bfin_writePTR(DMA3_CURR_ADDR, val) -#define bfin_read_DMA3_IRQ_STATUS() bfin_read16(DMA3_IRQ_STATUS) -#define bfin_write_DMA3_IRQ_STATUS(val) bfin_write16(DMA3_IRQ_STATUS, val) -#define bfin_read_DMA3_PERIPHERAL_MAP() bfin_read16(DMA3_PERIPHERAL_MAP) -#define bfin_write_DMA3_PERIPHERAL_MAP(val) bfin_write16(DMA3_PERIPHERAL_MAP, val) -#define bfin_read_DMA3_CURR_X_COUNT() bfin_read16(DMA3_CURR_X_COUNT) -#define bfin_write_DMA3_CURR_X_COUNT(val) bfin_write16(DMA3_CURR_X_COUNT, val) -#define bfin_read_DMA3_CURR_Y_COUNT() bfin_read16(DMA3_CURR_Y_COUNT) -#define bfin_write_DMA3_CURR_Y_COUNT(val) bfin_write16(DMA3_CURR_Y_COUNT, val) -#define bfin_read_DMA4_NEXT_DESC_PTR() bfin_readPTR(DMA4_NEXT_DESC_PTR) -#define bfin_write_DMA4_NEXT_DESC_PTR(val) bfin_writePTR(DMA4_NEXT_DESC_PTR, val) -#define bfin_read_DMA4_START_ADDR() bfin_readPTR(DMA4_START_ADDR) -#define bfin_write_DMA4_START_ADDR(val) bfin_writePTR(DMA4_START_ADDR, val) -#define bfin_read_DMA4_CONFIG() bfin_read16(DMA4_CONFIG) -#define bfin_write_DMA4_CONFIG(val) bfin_write16(DMA4_CONFIG, val) -#define bfin_read_DMA4_X_COUNT() bfin_read16(DMA4_X_COUNT) -#define bfin_write_DMA4_X_COUNT(val) bfin_write16(DMA4_X_COUNT, val) -#define bfin_read_DMA4_X_MODIFY() bfin_read16(DMA4_X_MODIFY) -#define bfin_write_DMA4_X_MODIFY(val) bfin_write16(DMA4_X_MODIFY, val) -#define bfin_read_DMA4_Y_COUNT() bfin_read16(DMA4_Y_COUNT) -#define bfin_write_DMA4_Y_COUNT(val) bfin_write16(DMA4_Y_COUNT, val) -#define bfin_read_DMA4_Y_MODIFY() bfin_read16(DMA4_Y_MODIFY) -#define bfin_write_DMA4_Y_MODIFY(val) bfin_write16(DMA4_Y_MODIFY, val) -#define bfin_read_DMA4_CURR_DESC_PTR() bfin_readPTR(DMA4_CURR_DESC_PTR) -#define bfin_write_DMA4_CURR_DESC_PTR(val) bfin_writePTR(DMA4_CURR_DESC_PTR, val) -#define bfin_read_DMA4_CURR_ADDR() bfin_readPTR(DMA4_CURR_ADDR) -#define bfin_write_DMA4_CURR_ADDR(val) bfin_writePTR(DMA4_CURR_ADDR, val) -#define bfin_read_DMA4_IRQ_STATUS() bfin_read16(DMA4_IRQ_STATUS) -#define bfin_write_DMA4_IRQ_STATUS(val) bfin_write16(DMA4_IRQ_STATUS, val) -#define bfin_read_DMA4_PERIPHERAL_MAP() bfin_read16(DMA4_PERIPHERAL_MAP) -#define bfin_write_DMA4_PERIPHERAL_MAP(val) bfin_write16(DMA4_PERIPHERAL_MAP, val) -#define bfin_read_DMA4_CURR_X_COUNT() bfin_read16(DMA4_CURR_X_COUNT) -#define bfin_write_DMA4_CURR_X_COUNT(val) bfin_write16(DMA4_CURR_X_COUNT, val) -#define bfin_read_DMA4_CURR_Y_COUNT() bfin_read16(DMA4_CURR_Y_COUNT) -#define bfin_write_DMA4_CURR_Y_COUNT(val) bfin_write16(DMA4_CURR_Y_COUNT, val) -#define bfin_read_DMA5_NEXT_DESC_PTR() bfin_readPTR(DMA5_NEXT_DESC_PTR) -#define bfin_write_DMA5_NEXT_DESC_PTR(val) bfin_writePTR(DMA5_NEXT_DESC_PTR, val) -#define bfin_read_DMA5_START_ADDR() bfin_readPTR(DMA5_START_ADDR) -#define bfin_write_DMA5_START_ADDR(val) bfin_writePTR(DMA5_START_ADDR, val) -#define bfin_read_DMA5_CONFIG() bfin_read16(DMA5_CONFIG) -#define bfin_write_DMA5_CONFIG(val) bfin_write16(DMA5_CONFIG, val) -#define bfin_read_DMA5_X_COUNT() bfin_read16(DMA5_X_COUNT) -#define bfin_write_DMA5_X_COUNT(val) bfin_write16(DMA5_X_COUNT, val) -#define bfin_read_DMA5_X_MODIFY() bfin_read16(DMA5_X_MODIFY) -#define bfin_write_DMA5_X_MODIFY(val) bfin_write16(DMA5_X_MODIFY, val) -#define bfin_read_DMA5_Y_COUNT() bfin_read16(DMA5_Y_COUNT) -#define bfin_write_DMA5_Y_COUNT(val) bfin_write16(DMA5_Y_COUNT, val) -#define bfin_read_DMA5_Y_MODIFY() bfin_read16(DMA5_Y_MODIFY) -#define bfin_write_DMA5_Y_MODIFY(val) bfin_write16(DMA5_Y_MODIFY, val) -#define bfin_read_DMA5_CURR_DESC_PTR() bfin_readPTR(DMA5_CURR_DESC_PTR) -#define bfin_write_DMA5_CURR_DESC_PTR(val) bfin_writePTR(DMA5_CURR_DESC_PTR, val) -#define bfin_read_DMA5_CURR_ADDR() bfin_readPTR(DMA5_CURR_ADDR) -#define bfin_write_DMA5_CURR_ADDR(val) bfin_writePTR(DMA5_CURR_ADDR, val) -#define bfin_read_DMA5_IRQ_STATUS() bfin_read16(DMA5_IRQ_STATUS) -#define bfin_write_DMA5_IRQ_STATUS(val) bfin_write16(DMA5_IRQ_STATUS, val) -#define bfin_read_DMA5_PERIPHERAL_MAP() bfin_read16(DMA5_PERIPHERAL_MAP) -#define bfin_write_DMA5_PERIPHERAL_MAP(val) bfin_write16(DMA5_PERIPHERAL_MAP, val) -#define bfin_read_DMA5_CURR_X_COUNT() bfin_read16(DMA5_CURR_X_COUNT) -#define bfin_write_DMA5_CURR_X_COUNT(val) bfin_write16(DMA5_CURR_X_COUNT, val) -#define bfin_read_DMA5_CURR_Y_COUNT() bfin_read16(DMA5_CURR_Y_COUNT) -#define bfin_write_DMA5_CURR_Y_COUNT(val) bfin_write16(DMA5_CURR_Y_COUNT, val) -#define bfin_read_DMA6_NEXT_DESC_PTR() bfin_read32(DMA6_NEXT_DESC_PTR) -#define bfin_write_DMA6_NEXT_DESC_PTR(val) bfin_write32(DMA6_NEXT_DESC_PTR, val) -#define bfin_read_DMA6_START_ADDR() bfin_readPTR(DMA6_START_ADDR) -#define bfin_write_DMA6_START_ADDR(val) bfin_writePTR(DMA6_START_ADDR, val) -#define bfin_read_DMA6_CONFIG() bfin_read16(DMA6_CONFIG) -#define bfin_write_DMA6_CONFIG(val) bfin_write16(DMA6_CONFIG, val) -#define bfin_read_DMA6_X_COUNT() bfin_read16(DMA6_X_COUNT) -#define bfin_write_DMA6_X_COUNT(val) bfin_write16(DMA6_X_COUNT, val) -#define bfin_read_DMA6_X_MODIFY() bfin_read16(DMA6_X_MODIFY) -#define bfin_write_DMA6_X_MODIFY(val) bfin_write16(DMA6_X_MODIFY, val) -#define bfin_read_DMA6_Y_COUNT() bfin_read16(DMA6_Y_COUNT) -#define bfin_write_DMA6_Y_COUNT(val) bfin_write16(DMA6_Y_COUNT, val) -#define bfin_read_DMA6_Y_MODIFY() bfin_read16(DMA6_Y_MODIFY) -#define bfin_write_DMA6_Y_MODIFY(val) bfin_write16(DMA6_Y_MODIFY, val) -#define bfin_read_DMA6_CURR_DESC_PTR() bfin_readPTR(DMA6_CURR_DESC_PTR) -#define bfin_write_DMA6_CURR_DESC_PTR(val) bfin_writePTR(DMA6_CURR_DESC_PTR, val) -#define bfin_read_DMA6_CURR_ADDR() bfin_readPTR(DMA6_CURR_ADDR) -#define bfin_write_DMA6_CURR_ADDR(val) bfin_writePTR(DMA6_CURR_ADDR, val) -#define bfin_read_DMA6_IRQ_STATUS() bfin_read16(DMA6_IRQ_STATUS) -#define bfin_write_DMA6_IRQ_STATUS(val) bfin_write16(DMA6_IRQ_STATUS, val) -#define bfin_read_DMA6_PERIPHERAL_MAP() bfin_read16(DMA6_PERIPHERAL_MAP) -#define bfin_write_DMA6_PERIPHERAL_MAP(val) bfin_write16(DMA6_PERIPHERAL_MAP, val) -#define bfin_read_DMA6_CURR_X_COUNT() bfin_read16(DMA6_CURR_X_COUNT) -#define bfin_write_DMA6_CURR_X_COUNT(val) bfin_write16(DMA6_CURR_X_COUNT, val) -#define bfin_read_DMA6_CURR_Y_COUNT() bfin_read16(DMA6_CURR_Y_COUNT) -#define bfin_write_DMA6_CURR_Y_COUNT(val) bfin_write16(DMA6_CURR_Y_COUNT, val) -#define bfin_read_DMA7_NEXT_DESC_PTR() bfin_readPTR(DMA7_NEXT_DESC_PTR) -#define bfin_write_DMA7_NEXT_DESC_PTR(val) bfin_writePTR(DMA7_NEXT_DESC_PTR, val) -#define bfin_read_DMA7_START_ADDR() bfin_readPTR(DMA7_START_ADDR) -#define bfin_write_DMA7_START_ADDR(val) bfin_writePTR(DMA7_START_ADDR, val) -#define bfin_read_DMA7_CONFIG() bfin_read16(DMA7_CONFIG) -#define bfin_write_DMA7_CONFIG(val) bfin_write16(DMA7_CONFIG, val) -#define bfin_read_DMA7_X_COUNT() bfin_read16(DMA7_X_COUNT) -#define bfin_write_DMA7_X_COUNT(val) bfin_write16(DMA7_X_COUNT, val) -#define bfin_read_DMA7_X_MODIFY() bfin_read16(DMA7_X_MODIFY) -#define bfin_write_DMA7_X_MODIFY(val) bfin_write16(DMA7_X_MODIFY, val) -#define bfin_read_DMA7_Y_COUNT() bfin_read16(DMA7_Y_COUNT) -#define bfin_write_DMA7_Y_COUNT(val) bfin_write16(DMA7_Y_COUNT, val) -#define bfin_read_DMA7_Y_MODIFY() bfin_read16(DMA7_Y_MODIFY) -#define bfin_write_DMA7_Y_MODIFY(val) bfin_write16(DMA7_Y_MODIFY, val) -#define bfin_read_DMA7_CURR_DESC_PTR() bfin_readPTR(DMA7_CURR_DESC_PTR) -#define bfin_write_DMA7_CURR_DESC_PTR(val) bfin_writePTR(DMA7_CURR_DESC_PTR, val) -#define bfin_read_DMA7_CURR_ADDR() bfin_readPTR(DMA7_CURR_ADDR) -#define bfin_write_DMA7_CURR_ADDR(val) bfin_writePTR(DMA7_CURR_ADDR, val) -#define bfin_read_DMA7_IRQ_STATUS() bfin_read16(DMA7_IRQ_STATUS) -#define bfin_write_DMA7_IRQ_STATUS(val) bfin_write16(DMA7_IRQ_STATUS, val) -#define bfin_read_DMA7_PERIPHERAL_MAP() bfin_read16(DMA7_PERIPHERAL_MAP) -#define bfin_write_DMA7_PERIPHERAL_MAP(val) bfin_write16(DMA7_PERIPHERAL_MAP, val) -#define bfin_read_DMA7_CURR_X_COUNT() bfin_read16(DMA7_CURR_X_COUNT) -#define bfin_write_DMA7_CURR_X_COUNT(val) bfin_write16(DMA7_CURR_X_COUNT, val) -#define bfin_read_DMA7_CURR_Y_COUNT() bfin_read16(DMA7_CURR_Y_COUNT) -#define bfin_write_DMA7_CURR_Y_COUNT(val) bfin_write16(DMA7_CURR_Y_COUNT, val) -#define bfin_read_DMA8_NEXT_DESC_PTR() bfin_readPTR(DMA8_NEXT_DESC_PTR) -#define bfin_write_DMA8_NEXT_DESC_PTR(val) bfin_writePTR(DMA8_NEXT_DESC_PTR, val) -#define bfin_read_DMA8_START_ADDR() bfin_readPTR(DMA8_START_ADDR) -#define bfin_write_DMA8_START_ADDR(val) bfin_writePTR(DMA8_START_ADDR, val) -#define bfin_read_DMA8_CONFIG() bfin_read16(DMA8_CONFIG) -#define bfin_write_DMA8_CONFIG(val) bfin_write16(DMA8_CONFIG, val) -#define bfin_read_DMA8_X_COUNT() bfin_read16(DMA8_X_COUNT) -#define bfin_write_DMA8_X_COUNT(val) bfin_write16(DMA8_X_COUNT, val) -#define bfin_read_DMA8_X_MODIFY() bfin_read16(DMA8_X_MODIFY) -#define bfin_write_DMA8_X_MODIFY(val) bfin_write16(DMA8_X_MODIFY, val) -#define bfin_read_DMA8_Y_COUNT() bfin_read16(DMA8_Y_COUNT) -#define bfin_write_DMA8_Y_COUNT(val) bfin_write16(DMA8_Y_COUNT, val) -#define bfin_read_DMA8_Y_MODIFY() bfin_read16(DMA8_Y_MODIFY) -#define bfin_write_DMA8_Y_MODIFY(val) bfin_write16(DMA8_Y_MODIFY, val) -#define bfin_read_DMA8_CURR_DESC_PTR() bfin_readPTR(DMA8_CURR_DESC_PTR) -#define bfin_write_DMA8_CURR_DESC_PTR(val) bfin_writePTR(DMA8_CURR_DESC_PTR, val) -#define bfin_read_DMA8_CURR_ADDR() bfin_readPTR(DMA8_CURR_ADDR) -#define bfin_write_DMA8_CURR_ADDR(val) bfin_writePTR(DMA8_CURR_ADDR, val) -#define bfin_read_DMA8_IRQ_STATUS() bfin_read16(DMA8_IRQ_STATUS) -#define bfin_write_DMA8_IRQ_STATUS(val) bfin_write16(DMA8_IRQ_STATUS, val) -#define bfin_read_DMA8_PERIPHERAL_MAP() bfin_read16(DMA8_PERIPHERAL_MAP) -#define bfin_write_DMA8_PERIPHERAL_MAP(val) bfin_write16(DMA8_PERIPHERAL_MAP, val) -#define bfin_read_DMA8_CURR_X_COUNT() bfin_read16(DMA8_CURR_X_COUNT) -#define bfin_write_DMA8_CURR_X_COUNT(val) bfin_write16(DMA8_CURR_X_COUNT, val) -#define bfin_read_DMA8_CURR_Y_COUNT() bfin_read16(DMA8_CURR_Y_COUNT) -#define bfin_write_DMA8_CURR_Y_COUNT(val) bfin_write16(DMA8_CURR_Y_COUNT, val) -#define bfin_read_DMA9_NEXT_DESC_PTR() bfin_readPTR(DMA9_NEXT_DESC_PTR) -#define bfin_write_DMA9_NEXT_DESC_PTR(val) bfin_writePTR(DMA9_NEXT_DESC_PTR, val) -#define bfin_read_DMA9_START_ADDR() bfin_readPTR(DMA9_START_ADDR) -#define bfin_write_DMA9_START_ADDR(val) bfin_writePTR(DMA9_START_ADDR, val) -#define bfin_read_DMA9_CONFIG() bfin_read16(DMA9_CONFIG) -#define bfin_write_DMA9_CONFIG(val) bfin_write16(DMA9_CONFIG, val) -#define bfin_read_DMA9_X_COUNT() bfin_read16(DMA9_X_COUNT) -#define bfin_write_DMA9_X_COUNT(val) bfin_write16(DMA9_X_COUNT, val) -#define bfin_read_DMA9_X_MODIFY() bfin_read16(DMA9_X_MODIFY) -#define bfin_write_DMA9_X_MODIFY(val) bfin_write16(DMA9_X_MODIFY, val) -#define bfin_read_DMA9_Y_COUNT() bfin_read16(DMA9_Y_COUNT) -#define bfin_write_DMA9_Y_COUNT(val) bfin_write16(DMA9_Y_COUNT, val) -#define bfin_read_DMA9_Y_MODIFY() bfin_read16(DMA9_Y_MODIFY) -#define bfin_write_DMA9_Y_MODIFY(val) bfin_write16(DMA9_Y_MODIFY, val) -#define bfin_read_DMA9_CURR_DESC_PTR() bfin_readPTR(DMA9_CURR_DESC_PTR) -#define bfin_write_DMA9_CURR_DESC_PTR(val) bfin_writePTR(DMA9_CURR_DESC_PTR, val) -#define bfin_read_DMA9_CURR_ADDR() bfin_readPTR(DMA9_CURR_ADDR) -#define bfin_write_DMA9_CURR_ADDR(val) bfin_writePTR(DMA9_CURR_ADDR, val) -#define bfin_read_DMA9_IRQ_STATUS() bfin_read16(DMA9_IRQ_STATUS) -#define bfin_write_DMA9_IRQ_STATUS(val) bfin_write16(DMA9_IRQ_STATUS, val) -#define bfin_read_DMA9_PERIPHERAL_MAP() bfin_read16(DMA9_PERIPHERAL_MAP) -#define bfin_write_DMA9_PERIPHERAL_MAP(val) bfin_write16(DMA9_PERIPHERAL_MAP, val) -#define bfin_read_DMA9_CURR_X_COUNT() bfin_read16(DMA9_CURR_X_COUNT) -#define bfin_write_DMA9_CURR_X_COUNT(val) bfin_write16(DMA9_CURR_X_COUNT, val) -#define bfin_read_DMA9_CURR_Y_COUNT() bfin_read16(DMA9_CURR_Y_COUNT) -#define bfin_write_DMA9_CURR_Y_COUNT(val) bfin_write16(DMA9_CURR_Y_COUNT, val) -#define bfin_read_DMA10_NEXT_DESC_PTR() bfin_readPTR(DMA10_NEXT_DESC_PTR) -#define bfin_write_DMA10_NEXT_DESC_PTR(val) bfin_writePTR(DMA10_NEXT_DESC_PTR, val) -#define bfin_read_DMA10_START_ADDR() bfin_readPTR(DMA10_START_ADDR) -#define bfin_write_DMA10_START_ADDR(val) bfin_writePTR(DMA10_START_ADDR, val) -#define bfin_read_DMA10_CONFIG() bfin_read16(DMA10_CONFIG) -#define bfin_write_DMA10_CONFIG(val) bfin_write16(DMA10_CONFIG, val) -#define bfin_read_DMA10_X_COUNT() bfin_read16(DMA10_X_COUNT) -#define bfin_write_DMA10_X_COUNT(val) bfin_write16(DMA10_X_COUNT, val) -#define bfin_read_DMA10_X_MODIFY() bfin_read16(DMA10_X_MODIFY) -#define bfin_write_DMA10_X_MODIFY(val) bfin_write16(DMA10_X_MODIFY, val) -#define bfin_read_DMA10_Y_COUNT() bfin_read16(DMA10_Y_COUNT) -#define bfin_write_DMA10_Y_COUNT(val) bfin_write16(DMA10_Y_COUNT, val) -#define bfin_read_DMA10_Y_MODIFY() bfin_read16(DMA10_Y_MODIFY) -#define bfin_write_DMA10_Y_MODIFY(val) bfin_write16(DMA10_Y_MODIFY, val) -#define bfin_read_DMA10_CURR_DESC_PTR() bfin_readPTR(DMA10_CURR_DESC_PTR) -#define bfin_write_DMA10_CURR_DESC_PTR(val) bfin_writePTR(DMA10_CURR_DESC_PTR, val) -#define bfin_read_DMA10_CURR_ADDR() bfin_readPTR(DMA10_CURR_ADDR) -#define bfin_write_DMA10_CURR_ADDR(val) bfin_writePTR(DMA10_CURR_ADDR, val) -#define bfin_read_DMA10_IRQ_STATUS() bfin_read16(DMA10_IRQ_STATUS) -#define bfin_write_DMA10_IRQ_STATUS(val) bfin_write16(DMA10_IRQ_STATUS, val) -#define bfin_read_DMA10_PERIPHERAL_MAP() bfin_read16(DMA10_PERIPHERAL_MAP) -#define bfin_write_DMA10_PERIPHERAL_MAP(val) bfin_write16(DMA10_PERIPHERAL_MAP, val) -#define bfin_read_DMA10_CURR_X_COUNT() bfin_read16(DMA10_CURR_X_COUNT) -#define bfin_write_DMA10_CURR_X_COUNT(val) bfin_write16(DMA10_CURR_X_COUNT, val) -#define bfin_read_DMA10_CURR_Y_COUNT() bfin_read16(DMA10_CURR_Y_COUNT) -#define bfin_write_DMA10_CURR_Y_COUNT(val) bfin_write16(DMA10_CURR_Y_COUNT, val) -#define bfin_read_DMA11_NEXT_DESC_PTR() bfin_readPTR(DMA11_NEXT_DESC_PTR) -#define bfin_write_DMA11_NEXT_DESC_PTR(val) bfin_writePTR(DMA11_NEXT_DESC_PTR, val) -#define bfin_read_DMA11_START_ADDR() bfin_readPTR(DMA11_START_ADDR) -#define bfin_write_DMA11_START_ADDR(val) bfin_writePTR(DMA11_START_ADDR, val) -#define bfin_read_DMA11_CONFIG() bfin_read16(DMA11_CONFIG) -#define bfin_write_DMA11_CONFIG(val) bfin_write16(DMA11_CONFIG, val) -#define bfin_read_DMA11_X_COUNT() bfin_read16(DMA11_X_COUNT) -#define bfin_write_DMA11_X_COUNT(val) bfin_write16(DMA11_X_COUNT, val) -#define bfin_read_DMA11_X_MODIFY() bfin_read16(DMA11_X_MODIFY) -#define bfin_write_DMA11_X_MODIFY(val) bfin_write16(DMA11_X_MODIFY, val) -#define bfin_read_DMA11_Y_COUNT() bfin_read16(DMA11_Y_COUNT) -#define bfin_write_DMA11_Y_COUNT(val) bfin_write16(DMA11_Y_COUNT, val) -#define bfin_read_DMA11_Y_MODIFY() bfin_read16(DMA11_Y_MODIFY) -#define bfin_write_DMA11_Y_MODIFY(val) bfin_write16(DMA11_Y_MODIFY, val) -#define bfin_read_DMA11_CURR_DESC_PTR() bfin_readPTR(DMA11_CURR_DESC_PTR) -#define bfin_write_DMA11_CURR_DESC_PTR(val) bfin_writePTR(DMA11_CURR_DESC_PTR, val) -#define bfin_read_DMA11_CURR_ADDR() bfin_readPTR(DMA11_CURR_ADDR) -#define bfin_write_DMA11_CURR_ADDR(val) bfin_writePTR(DMA11_CURR_ADDR, val) -#define bfin_read_DMA11_IRQ_STATUS() bfin_read16(DMA11_IRQ_STATUS) -#define bfin_write_DMA11_IRQ_STATUS(val) bfin_write16(DMA11_IRQ_STATUS, val) -#define bfin_read_DMA11_PERIPHERAL_MAP() bfin_read16(DMA11_PERIPHERAL_MAP) -#define bfin_write_DMA11_PERIPHERAL_MAP(val) bfin_write16(DMA11_PERIPHERAL_MAP, val) -#define bfin_read_DMA11_CURR_X_COUNT() bfin_read16(DMA11_CURR_X_COUNT) -#define bfin_write_DMA11_CURR_X_COUNT(val) bfin_write16(DMA11_CURR_X_COUNT, val) -#define bfin_read_DMA11_CURR_Y_COUNT() bfin_read16(DMA11_CURR_Y_COUNT) -#define bfin_write_DMA11_CURR_Y_COUNT(val) bfin_write16(DMA11_CURR_Y_COUNT, val) -#define bfin_read_MDMA_S0_NEXT_DESC_PTR() bfin_readPTR(MDMA_S0_NEXT_DESC_PTR) -#define bfin_write_MDMA_S0_NEXT_DESC_PTR(val) bfin_writePTR(MDMA_S0_NEXT_DESC_PTR, val) -#define bfin_read_MDMA_S0_START_ADDR() bfin_readPTR(MDMA_S0_START_ADDR) -#define bfin_write_MDMA_S0_START_ADDR(val) bfin_writePTR(MDMA_S0_START_ADDR, val) -#define bfin_read_MDMA_S0_CONFIG() bfin_read16(MDMA_S0_CONFIG) -#define bfin_write_MDMA_S0_CONFIG(val) bfin_write16(MDMA_S0_CONFIG, val) -#define bfin_read_MDMA_S0_X_COUNT() bfin_read16(MDMA_S0_X_COUNT) -#define bfin_write_MDMA_S0_X_COUNT(val) bfin_write16(MDMA_S0_X_COUNT, val) -#define bfin_read_MDMA_S0_X_MODIFY() bfin_read16(MDMA_S0_X_MODIFY) -#define bfin_write_MDMA_S0_X_MODIFY(val) bfin_write16(MDMA_S0_X_MODIFY, val) -#define bfin_read_MDMA_S0_Y_COUNT() bfin_read16(MDMA_S0_Y_COUNT) -#define bfin_write_MDMA_S0_Y_COUNT(val) bfin_write16(MDMA_S0_Y_COUNT, val) -#define bfin_read_MDMA_S0_Y_MODIFY() bfin_read16(MDMA_S0_Y_MODIFY) -#define bfin_write_MDMA_S0_Y_MODIFY(val) bfin_write16(MDMA_S0_Y_MODIFY, val) -#define bfin_read_MDMA_S0_CURR_DESC_PTR() bfin_readPTR(MDMA_S0_CURR_DESC_PTR) -#define bfin_write_MDMA_S0_CURR_DESC_PTR(val) bfin_writePTR(MDMA_S0_CURR_DESC_PTR, val) -#define bfin_read_MDMA_S0_CURR_ADDR() bfin_readPTR(MDMA_S0_CURR_ADDR) -#define bfin_write_MDMA_S0_CURR_ADDR(val) bfin_writePTR(MDMA_S0_CURR_ADDR, val) -#define bfin_read_MDMA_S0_IRQ_STATUS() bfin_read16(MDMA_S0_IRQ_STATUS) -#define bfin_write_MDMA_S0_IRQ_STATUS(val) bfin_write16(MDMA_S0_IRQ_STATUS, val) -#define bfin_read_MDMA_S0_PERIPHERAL_MAP() bfin_read16(MDMA_S0_PERIPHERAL_MAP) -#define bfin_write_MDMA_S0_PERIPHERAL_MAP(val) bfin_write16(MDMA_S0_PERIPHERAL_MAP, val) -#define bfin_read_MDMA_S0_CURR_X_COUNT() bfin_read16(MDMA_S0_CURR_X_COUNT) -#define bfin_write_MDMA_S0_CURR_X_COUNT(val) bfin_write16(MDMA_S0_CURR_X_COUNT, val) -#define bfin_read_MDMA_S0_CURR_Y_COUNT() bfin_read16(MDMA_S0_CURR_Y_COUNT) -#define bfin_write_MDMA_S0_CURR_Y_COUNT(val) bfin_write16(MDMA_S0_CURR_Y_COUNT, val) -#define bfin_read_MDMA_D0_NEXT_DESC_PTR() bfin_readPTR(MDMA_D0_NEXT_DESC_PTR) -#define bfin_write_MDMA_D0_NEXT_DESC_PTR(val) bfin_writePTR(MDMA_D0_NEXT_DESC_PTR, val) -#define bfin_read_MDMA_D0_START_ADDR() bfin_readPTR(MDMA_D0_START_ADDR) -#define bfin_write_MDMA_D0_START_ADDR(val) bfin_writePTR(MDMA_D0_START_ADDR, val) -#define bfin_read_MDMA_D0_CONFIG() bfin_read16(MDMA_D0_CONFIG) -#define bfin_write_MDMA_D0_CONFIG(val) bfin_write16(MDMA_D0_CONFIG, val) -#define bfin_read_MDMA_D0_X_COUNT() bfin_read16(MDMA_D0_X_COUNT) -#define bfin_write_MDMA_D0_X_COUNT(val) bfin_write16(MDMA_D0_X_COUNT, val) -#define bfin_read_MDMA_D0_X_MODIFY() bfin_read16(MDMA_D0_X_MODIFY) -#define bfin_write_MDMA_D0_X_MODIFY(val) bfin_write16(MDMA_D0_X_MODIFY, val) -#define bfin_read_MDMA_D0_Y_COUNT() bfin_read16(MDMA_D0_Y_COUNT) -#define bfin_write_MDMA_D0_Y_COUNT(val) bfin_write16(MDMA_D0_Y_COUNT, val) -#define bfin_read_MDMA_D0_Y_MODIFY() bfin_read16(MDMA_D0_Y_MODIFY) -#define bfin_write_MDMA_D0_Y_MODIFY(val) bfin_write16(MDMA_D0_Y_MODIFY, val) -#define bfin_read_MDMA_D0_CURR_DESC_PTR() bfin_readPTR(MDMA_D0_CURR_DESC_PTR) -#define bfin_write_MDMA_D0_CURR_DESC_PTR(val) bfin_writePTR(MDMA_D0_CURR_DESC_PTR, val) -#define bfin_read_MDMA_D0_CURR_ADDR() bfin_readPTR(MDMA_D0_CURR_ADDR) -#define bfin_write_MDMA_D0_CURR_ADDR(val) bfin_writePTR(MDMA_D0_CURR_ADDR, val) -#define bfin_read_MDMA_D0_IRQ_STATUS() bfin_read16(MDMA_D0_IRQ_STATUS) -#define bfin_write_MDMA_D0_IRQ_STATUS(val) bfin_write16(MDMA_D0_IRQ_STATUS, val) -#define bfin_read_MDMA_D0_PERIPHERAL_MAP() bfin_read16(MDMA_D0_PERIPHERAL_MAP) -#define bfin_write_MDMA_D0_PERIPHERAL_MAP(val) bfin_write16(MDMA_D0_PERIPHERAL_MAP, val) -#define bfin_read_MDMA_D0_CURR_X_COUNT() bfin_read16(MDMA_D0_CURR_X_COUNT) -#define bfin_write_MDMA_D0_CURR_X_COUNT(val) bfin_write16(MDMA_D0_CURR_X_COUNT, val) -#define bfin_read_MDMA_D0_CURR_Y_COUNT() bfin_read16(MDMA_D0_CURR_Y_COUNT) -#define bfin_write_MDMA_D0_CURR_Y_COUNT(val) bfin_write16(MDMA_D0_CURR_Y_COUNT, val) -#define bfin_read_MDMA_S1_NEXT_DESC_PTR() bfin_readPTR(MDMA_S1_NEXT_DESC_PTR) -#define bfin_write_MDMA_S1_NEXT_DESC_PTR(val) bfin_writePTR(MDMA_S1_NEXT_DESC_PTR, val) -#define bfin_read_MDMA_S1_START_ADDR() bfin_readPTR(MDMA_S1_START_ADDR) -#define bfin_write_MDMA_S1_START_ADDR(val) bfin_writePTR(MDMA_S1_START_ADDR, val) -#define bfin_read_MDMA_S1_CONFIG() bfin_read16(MDMA_S1_CONFIG) -#define bfin_write_MDMA_S1_CONFIG(val) bfin_write16(MDMA_S1_CONFIG, val) -#define bfin_read_MDMA_S1_X_COUNT() bfin_read16(MDMA_S1_X_COUNT) -#define bfin_write_MDMA_S1_X_COUNT(val) bfin_write16(MDMA_S1_X_COUNT, val) -#define bfin_read_MDMA_S1_X_MODIFY() bfin_read16(MDMA_S1_X_MODIFY) -#define bfin_write_MDMA_S1_X_MODIFY(val) bfin_write16(MDMA_S1_X_MODIFY, val) -#define bfin_read_MDMA_S1_Y_COUNT() bfin_read16(MDMA_S1_Y_COUNT) -#define bfin_write_MDMA_S1_Y_COUNT(val) bfin_write16(MDMA_S1_Y_COUNT, val) -#define bfin_read_MDMA_S1_Y_MODIFY() bfin_read16(MDMA_S1_Y_MODIFY) -#define bfin_write_MDMA_S1_Y_MODIFY(val) bfin_write16(MDMA_S1_Y_MODIFY, val) -#define bfin_read_MDMA_S1_CURR_DESC_PTR() bfin_readPTR(MDMA_S1_CURR_DESC_PTR) -#define bfin_write_MDMA_S1_CURR_DESC_PTR(val) bfin_writePTR(MDMA_S1_CURR_DESC_PTR, val) -#define bfin_read_MDMA_S1_CURR_ADDR() bfin_readPTR(MDMA_S1_CURR_ADDR) -#define bfin_write_MDMA_S1_CURR_ADDR(val) bfin_writePTR(MDMA_S1_CURR_ADDR, val) -#define bfin_read_MDMA_S1_IRQ_STATUS() bfin_read16(MDMA_S1_IRQ_STATUS) -#define bfin_write_MDMA_S1_IRQ_STATUS(val) bfin_write16(MDMA_S1_IRQ_STATUS, val) -#define bfin_read_MDMA_S1_PERIPHERAL_MAP() bfin_read16(MDMA_S1_PERIPHERAL_MAP) -#define bfin_write_MDMA_S1_PERIPHERAL_MAP(val) bfin_write16(MDMA_S1_PERIPHERAL_MAP, val) -#define bfin_read_MDMA_S1_CURR_X_COUNT() bfin_read16(MDMA_S1_CURR_X_COUNT) -#define bfin_write_MDMA_S1_CURR_X_COUNT(val) bfin_write16(MDMA_S1_CURR_X_COUNT, val) -#define bfin_read_MDMA_S1_CURR_Y_COUNT() bfin_read16(MDMA_S1_CURR_Y_COUNT) -#define bfin_write_MDMA_S1_CURR_Y_COUNT(val) bfin_write16(MDMA_S1_CURR_Y_COUNT, val) -#define bfin_read_MDMA_D1_NEXT_DESC_PTR() bfin_readPTR(MDMA_D1_NEXT_DESC_PTR) -#define bfin_write_MDMA_D1_NEXT_DESC_PTR(val) bfin_writePTR(MDMA_D1_NEXT_DESC_PTR, val) -#define bfin_read_MDMA_D1_START_ADDR() bfin_readPTR(MDMA_D1_START_ADDR) -#define bfin_write_MDMA_D1_START_ADDR(val) bfin_writePTR(MDMA_D1_START_ADDR, val) -#define bfin_read_MDMA_D1_CONFIG() bfin_read16(MDMA_D1_CONFIG) -#define bfin_write_MDMA_D1_CONFIG(val) bfin_write16(MDMA_D1_CONFIG, val) -#define bfin_read_MDMA_D1_X_COUNT() bfin_read16(MDMA_D1_X_COUNT) -#define bfin_write_MDMA_D1_X_COUNT(val) bfin_write16(MDMA_D1_X_COUNT, val) -#define bfin_read_MDMA_D1_X_MODIFY() bfin_read16(MDMA_D1_X_MODIFY) -#define bfin_write_MDMA_D1_X_MODIFY(val) bfin_write16(MDMA_D1_X_MODIFY, val) -#define bfin_read_MDMA_D1_Y_COUNT() bfin_read16(MDMA_D1_Y_COUNT) -#define bfin_write_MDMA_D1_Y_COUNT(val) bfin_write16(MDMA_D1_Y_COUNT, val) -#define bfin_read_MDMA_D1_Y_MODIFY() bfin_read16(MDMA_D1_Y_MODIFY) -#define bfin_write_MDMA_D1_Y_MODIFY(val) bfin_write16(MDMA_D1_Y_MODIFY, val) -#define bfin_read_MDMA_D1_CURR_DESC_PTR() bfin_readPTR(MDMA_D1_CURR_DESC_PTR) -#define bfin_write_MDMA_D1_CURR_DESC_PTR(val) bfin_writePTR(MDMA_D1_CURR_DESC_PTR, val) -#define bfin_read_MDMA_D1_CURR_ADDR() bfin_readPTR(MDMA_D1_CURR_ADDR) -#define bfin_write_MDMA_D1_CURR_ADDR(val) bfin_writePTR(MDMA_D1_CURR_ADDR, val) -#define bfin_read_MDMA_D1_IRQ_STATUS() bfin_read16(MDMA_D1_IRQ_STATUS) -#define bfin_write_MDMA_D1_IRQ_STATUS(val) bfin_write16(MDMA_D1_IRQ_STATUS, val) -#define bfin_read_MDMA_D1_PERIPHERAL_MAP() bfin_read16(MDMA_D1_PERIPHERAL_MAP) -#define bfin_write_MDMA_D1_PERIPHERAL_MAP(val) bfin_write16(MDMA_D1_PERIPHERAL_MAP, val) -#define bfin_read_MDMA_D1_CURR_X_COUNT() bfin_read16(MDMA_D1_CURR_X_COUNT) -#define bfin_write_MDMA_D1_CURR_X_COUNT(val) bfin_write16(MDMA_D1_CURR_X_COUNT, val) -#define bfin_read_MDMA_D1_CURR_Y_COUNT() bfin_read16(MDMA_D1_CURR_Y_COUNT) -#define bfin_write_MDMA_D1_CURR_Y_COUNT(val) bfin_write16(MDMA_D1_CURR_Y_COUNT, val) -#define bfin_read_PPI_CONTROL() bfin_read16(PPI_CONTROL) -#define bfin_write_PPI_CONTROL(val) bfin_write16(PPI_CONTROL, val) -#define bfin_read_PPI_STATUS() bfin_read16(PPI_STATUS) -#define bfin_write_PPI_STATUS(val) bfin_write16(PPI_STATUS, val) -#define bfin_read_PPI_COUNT() bfin_read16(PPI_COUNT) -#define bfin_write_PPI_COUNT(val) bfin_write16(PPI_COUNT, val) -#define bfin_read_PPI_DELAY() bfin_read16(PPI_DELAY) -#define bfin_write_PPI_DELAY(val) bfin_write16(PPI_DELAY, val) -#define bfin_read_PPI_FRAME() bfin_read16(PPI_FRAME) -#define bfin_write_PPI_FRAME(val) bfin_write16(PPI_FRAME, val) -#define bfin_read_TWI_CLKDIV() bfin_read16(TWI_CLKDIV) -#define bfin_write_TWI_CLKDIV(val) bfin_write16(TWI_CLKDIV, val) -#define bfin_read_TWI_CONTROL() bfin_read16(TWI_CONTROL) -#define bfin_write_TWI_CONTROL(val) bfin_write16(TWI_CONTROL, val) -#define bfin_read_TWI_SLAVE_CTL() bfin_read16(TWI_SLAVE_CTL) -#define bfin_write_TWI_SLAVE_CTL(val) bfin_write16(TWI_SLAVE_CTL, val) -#define bfin_read_TWI_SLAVE_STAT() bfin_read16(TWI_SLAVE_STAT) -#define bfin_write_TWI_SLAVE_STAT(val) bfin_write16(TWI_SLAVE_STAT, val) -#define bfin_read_TWI_SLAVE_ADDR() bfin_read16(TWI_SLAVE_ADDR) -#define bfin_write_TWI_SLAVE_ADDR(val) bfin_write16(TWI_SLAVE_ADDR, val) -#define bfin_read_TWI_MASTER_CTL() bfin_read16(TWI_MASTER_CTL) -#define bfin_write_TWI_MASTER_CTL(val) bfin_write16(TWI_MASTER_CTL, val) -#define bfin_read_TWI_MASTER_STAT() bfin_read16(TWI_MASTER_STAT) -#define bfin_write_TWI_MASTER_STAT(val) bfin_write16(TWI_MASTER_STAT, val) -#define bfin_read_TWI_MASTER_ADDR() bfin_read16(TWI_MASTER_ADDR) -#define bfin_write_TWI_MASTER_ADDR(val) bfin_write16(TWI_MASTER_ADDR, val) -#define bfin_read_TWI_INT_STAT() bfin_read16(TWI_INT_STAT) -#define bfin_write_TWI_INT_STAT(val) bfin_write16(TWI_INT_STAT, val) -#define bfin_read_TWI_INT_MASK() bfin_read16(TWI_INT_MASK) -#define bfin_write_TWI_INT_MASK(val) bfin_write16(TWI_INT_MASK, val) -#define bfin_read_TWI_FIFO_CTL() bfin_read16(TWI_FIFO_CTL) -#define bfin_write_TWI_FIFO_CTL(val) bfin_write16(TWI_FIFO_CTL, val) -#define bfin_read_TWI_FIFO_STAT() bfin_read16(TWI_FIFO_STAT) -#define bfin_write_TWI_FIFO_STAT(val) bfin_write16(TWI_FIFO_STAT, val) -#define bfin_read_TWI_XMT_DATA8() bfin_read16(TWI_XMT_DATA8) -#define bfin_write_TWI_XMT_DATA8(val) bfin_write16(TWI_XMT_DATA8, val) -#define bfin_read_TWI_XMT_DATA16() bfin_read16(TWI_XMT_DATA16) -#define bfin_write_TWI_XMT_DATA16(val) bfin_write16(TWI_XMT_DATA16, val) -#define bfin_read_TWI_RCV_DATA8() bfin_read16(TWI_RCV_DATA8) -#define bfin_write_TWI_RCV_DATA8(val) bfin_write16(TWI_RCV_DATA8, val) -#define bfin_read_TWI_RCV_DATA16() bfin_read16(TWI_RCV_DATA16) -#define bfin_write_TWI_RCV_DATA16(val) bfin_write16(TWI_RCV_DATA16, val) -#define bfin_read_PORTGIO() bfin_read16(PORTGIO) -#define bfin_write_PORTGIO(val) bfin_write16(PORTGIO, val) -#define bfin_read_PORTGIO_CLEAR() bfin_read16(PORTGIO_CLEAR) -#define bfin_write_PORTGIO_CLEAR(val) bfin_write16(PORTGIO_CLEAR, val) -#define bfin_read_PORTGIO_SET() bfin_read16(PORTGIO_SET) -#define bfin_write_PORTGIO_SET(val) bfin_write16(PORTGIO_SET, val) -#define bfin_read_PORTGIO_TOGGLE() bfin_read16(PORTGIO_TOGGLE) -#define bfin_write_PORTGIO_TOGGLE(val) bfin_write16(PORTGIO_TOGGLE, val) -#define bfin_read_PORTGIO_MASKA() bfin_read16(PORTGIO_MASKA) -#define bfin_write_PORTGIO_MASKA(val) bfin_write16(PORTGIO_MASKA, val) -#define bfin_read_PORTGIO_MASKA_CLEAR() bfin_read16(PORTGIO_MASKA_CLEAR) -#define bfin_write_PORTGIO_MASKA_CLEAR(val) bfin_write16(PORTGIO_MASKA_CLEAR, val) -#define bfin_read_PORTGIO_MASKA_SET() bfin_read16(PORTGIO_MASKA_SET) -#define bfin_write_PORTGIO_MASKA_SET(val) bfin_write16(PORTGIO_MASKA_SET, val) -#define bfin_read_PORTGIO_MASKA_TOGGLE() bfin_read16(PORTGIO_MASKA_TOGGLE) -#define bfin_write_PORTGIO_MASKA_TOGGLE(val) bfin_write16(PORTGIO_MASKA_TOGGLE, val) -#define bfin_read_PORTGIO_MASKB() bfin_read16(PORTGIO_MASKB) -#define bfin_write_PORTGIO_MASKB(val) bfin_write16(PORTGIO_MASKB, val) -#define bfin_read_PORTGIO_MASKB_CLEAR() bfin_read16(PORTGIO_MASKB_CLEAR) -#define bfin_write_PORTGIO_MASKB_CLEAR(val) bfin_write16(PORTGIO_MASKB_CLEAR, val) -#define bfin_read_PORTGIO_MASKB_SET() bfin_read16(PORTGIO_MASKB_SET) -#define bfin_write_PORTGIO_MASKB_SET(val) bfin_write16(PORTGIO_MASKB_SET, val) -#define bfin_read_PORTGIO_MASKB_TOGGLE() bfin_read16(PORTGIO_MASKB_TOGGLE) -#define bfin_write_PORTGIO_MASKB_TOGGLE(val) bfin_write16(PORTGIO_MASKB_TOGGLE, val) -#define bfin_read_PORTGIO_DIR() bfin_read16(PORTGIO_DIR) -#define bfin_write_PORTGIO_DIR(val) bfin_write16(PORTGIO_DIR, val) -#define bfin_read_PORTGIO_POLAR() bfin_read16(PORTGIO_POLAR) -#define bfin_write_PORTGIO_POLAR(val) bfin_write16(PORTGIO_POLAR, val) -#define bfin_read_PORTGIO_EDGE() bfin_read16(PORTGIO_EDGE) -#define bfin_write_PORTGIO_EDGE(val) bfin_write16(PORTGIO_EDGE, val) -#define bfin_read_PORTGIO_BOTH() bfin_read16(PORTGIO_BOTH) -#define bfin_write_PORTGIO_BOTH(val) bfin_write16(PORTGIO_BOTH, val) -#define bfin_read_PORTGIO_INEN() bfin_read16(PORTGIO_INEN) -#define bfin_write_PORTGIO_INEN(val) bfin_write16(PORTGIO_INEN, val) -#define bfin_read_PORTHIO() bfin_read16(PORTHIO) -#define bfin_write_PORTHIO(val) bfin_write16(PORTHIO, val) -#define bfin_read_PORTHIO_CLEAR() bfin_read16(PORTHIO_CLEAR) -#define bfin_write_PORTHIO_CLEAR(val) bfin_write16(PORTHIO_CLEAR, val) -#define bfin_read_PORTHIO_SET() bfin_read16(PORTHIO_SET) -#define bfin_write_PORTHIO_SET(val) bfin_write16(PORTHIO_SET, val) -#define bfin_read_PORTHIO_TOGGLE() bfin_read16(PORTHIO_TOGGLE) -#define bfin_write_PORTHIO_TOGGLE(val) bfin_write16(PORTHIO_TOGGLE, val) -#define bfin_read_PORTHIO_MASKA() bfin_read16(PORTHIO_MASKA) -#define bfin_write_PORTHIO_MASKA(val) bfin_write16(PORTHIO_MASKA, val) -#define bfin_read_PORTHIO_MASKA_CLEAR() bfin_read16(PORTHIO_MASKA_CLEAR) -#define bfin_write_PORTHIO_MASKA_CLEAR(val) bfin_write16(PORTHIO_MASKA_CLEAR, val) -#define bfin_read_PORTHIO_MASKA_SET() bfin_read16(PORTHIO_MASKA_SET) -#define bfin_write_PORTHIO_MASKA_SET(val) bfin_write16(PORTHIO_MASKA_SET, val) -#define bfin_read_PORTHIO_MASKA_TOGGLE() bfin_read16(PORTHIO_MASKA_TOGGLE) -#define bfin_write_PORTHIO_MASKA_TOGGLE(val) bfin_write16(PORTHIO_MASKA_TOGGLE, val) -#define bfin_read_PORTHIO_MASKB() bfin_read16(PORTHIO_MASKB) -#define bfin_write_PORTHIO_MASKB(val) bfin_write16(PORTHIO_MASKB, val) -#define bfin_read_PORTHIO_MASKB_CLEAR() bfin_read16(PORTHIO_MASKB_CLEAR) -#define bfin_write_PORTHIO_MASKB_CLEAR(val) bfin_write16(PORTHIO_MASKB_CLEAR, val) -#define bfin_read_PORTHIO_MASKB_SET() bfin_read16(PORTHIO_MASKB_SET) -#define bfin_write_PORTHIO_MASKB_SET(val) bfin_write16(PORTHIO_MASKB_SET, val) -#define bfin_read_PORTHIO_MASKB_TOGGLE() bfin_read16(PORTHIO_MASKB_TOGGLE) -#define bfin_write_PORTHIO_MASKB_TOGGLE(val) bfin_write16(PORTHIO_MASKB_TOGGLE, val) -#define bfin_read_PORTHIO_DIR() bfin_read16(PORTHIO_DIR) -#define bfin_write_PORTHIO_DIR(val) bfin_write16(PORTHIO_DIR, val) -#define bfin_read_PORTHIO_POLAR() bfin_read16(PORTHIO_POLAR) -#define bfin_write_PORTHIO_POLAR(val) bfin_write16(PORTHIO_POLAR, val) -#define bfin_read_PORTHIO_EDGE() bfin_read16(PORTHIO_EDGE) -#define bfin_write_PORTHIO_EDGE(val) bfin_write16(PORTHIO_EDGE, val) -#define bfin_read_PORTHIO_BOTH() bfin_read16(PORTHIO_BOTH) -#define bfin_write_PORTHIO_BOTH(val) bfin_write16(PORTHIO_BOTH, val) -#define bfin_read_PORTHIO_INEN() bfin_read16(PORTHIO_INEN) -#define bfin_write_PORTHIO_INEN(val) bfin_write16(PORTHIO_INEN, val) -#define bfin_read_UART1_THR() bfin_read16(UART1_THR) -#define bfin_write_UART1_THR(val) bfin_write16(UART1_THR, val) -#define bfin_read_UART1_RBR() bfin_read16(UART1_RBR) -#define bfin_write_UART1_RBR(val) bfin_write16(UART1_RBR, val) -#define bfin_read_UART1_DLL() bfin_read16(UART1_DLL) -#define bfin_write_UART1_DLL(val) bfin_write16(UART1_DLL, val) -#define bfin_read_UART1_IER() bfin_read16(UART1_IER) -#define bfin_write_UART1_IER(val) bfin_write16(UART1_IER, val) -#define bfin_read_UART1_DLH() bfin_read16(UART1_DLH) -#define bfin_write_UART1_DLH(val) bfin_write16(UART1_DLH, val) -#define bfin_read_UART1_IIR() bfin_read16(UART1_IIR) -#define bfin_write_UART1_IIR(val) bfin_write16(UART1_IIR, val) -#define bfin_read_UART1_LCR() bfin_read16(UART1_LCR) -#define bfin_write_UART1_LCR(val) bfin_write16(UART1_LCR, val) -#define bfin_read_UART1_MCR() bfin_read16(UART1_MCR) -#define bfin_write_UART1_MCR(val) bfin_write16(UART1_MCR, val) -#define bfin_read_UART1_LSR() bfin_read16(UART1_LSR) -#define bfin_write_UART1_LSR(val) bfin_write16(UART1_LSR, val) -#define bfin_read_UART1_MSR() bfin_read16(UART1_MSR) -#define bfin_write_UART1_MSR(val) bfin_write16(UART1_MSR, val) -#define bfin_read_UART1_SCR() bfin_read16(UART1_SCR) -#define bfin_write_UART1_SCR(val) bfin_write16(UART1_SCR, val) -#define bfin_read_UART1_GCTL() bfin_read16(UART1_GCTL) -#define bfin_write_UART1_GCTL(val) bfin_write16(UART1_GCTL, val) -#define bfin_read_PORTF_FER() bfin_read16(PORTF_FER) -#define bfin_write_PORTF_FER(val) bfin_write16(PORTF_FER, val) -#define bfin_read_PORTG_FER() bfin_read16(PORTG_FER) -#define bfin_write_PORTG_FER(val) bfin_write16(PORTG_FER, val) -#define bfin_read_PORTH_FER() bfin_read16(PORTH_FER) -#define bfin_write_PORTH_FER(val) bfin_write16(PORTH_FER, val) -#define bfin_read_HMDMA0_CONTROL() bfin_read16(HMDMA0_CONTROL) -#define bfin_write_HMDMA0_CONTROL(val) bfin_write16(HMDMA0_CONTROL, val) -#define bfin_read_HMDMA0_ECINIT() bfin_read16(HMDMA0_ECINIT) -#define bfin_write_HMDMA0_ECINIT(val) bfin_write16(HMDMA0_ECINIT, val) -#define bfin_read_HMDMA0_BCINIT() bfin_read16(HMDMA0_BCINIT) -#define bfin_write_HMDMA0_BCINIT(val) bfin_write16(HMDMA0_BCINIT, val) -#define bfin_read_HMDMA0_ECURGENT() bfin_read16(HMDMA0_ECURGENT) -#define bfin_write_HMDMA0_ECURGENT(val) bfin_write16(HMDMA0_ECURGENT, val) -#define bfin_read_HMDMA0_ECOVERFLOW() bfin_read16(HMDMA0_ECOVERFLOW) -#define bfin_write_HMDMA0_ECOVERFLOW(val) bfin_write16(HMDMA0_ECOVERFLOW, val) -#define bfin_read_HMDMA0_ECOUNT() bfin_read16(HMDMA0_ECOUNT) -#define bfin_write_HMDMA0_ECOUNT(val) bfin_write16(HMDMA0_ECOUNT, val) -#define bfin_read_HMDMA0_BCOUNT() bfin_read16(HMDMA0_BCOUNT) -#define bfin_write_HMDMA0_BCOUNT(val) bfin_write16(HMDMA0_BCOUNT, val) -#define bfin_read_HMDMA1_CONTROL() bfin_read16(HMDMA1_CONTROL) -#define bfin_write_HMDMA1_CONTROL(val) bfin_write16(HMDMA1_CONTROL, val) -#define bfin_read_HMDMA1_ECINIT() bfin_read16(HMDMA1_ECINIT) -#define bfin_write_HMDMA1_ECINIT(val) bfin_write16(HMDMA1_ECINIT, val) -#define bfin_read_HMDMA1_BCINIT() bfin_read16(HMDMA1_BCINIT) -#define bfin_write_HMDMA1_BCINIT(val) bfin_write16(HMDMA1_BCINIT, val) -#define bfin_read_HMDMA1_ECURGENT() bfin_read16(HMDMA1_ECURGENT) -#define bfin_write_HMDMA1_ECURGENT(val) bfin_write16(HMDMA1_ECURGENT, val) -#define bfin_read_HMDMA1_ECOVERFLOW() bfin_read16(HMDMA1_ECOVERFLOW) -#define bfin_write_HMDMA1_ECOVERFLOW(val) bfin_write16(HMDMA1_ECOVERFLOW, val) -#define bfin_read_HMDMA1_ECOUNT() bfin_read16(HMDMA1_ECOUNT) -#define bfin_write_HMDMA1_ECOUNT(val) bfin_write16(HMDMA1_ECOUNT, val) -#define bfin_read_HMDMA1_BCOUNT() bfin_read16(HMDMA1_BCOUNT) -#define bfin_write_HMDMA1_BCOUNT(val) bfin_write16(HMDMA1_BCOUNT, val) -#define bfin_read_PORTF_MUX() bfin_read16(PORTF_MUX) -#define bfin_write_PORTF_MUX(val) bfin_write16(PORTF_MUX, val) -#define bfin_read_PORTG_MUX() bfin_read16(PORTG_MUX) -#define bfin_write_PORTG_MUX(val) bfin_write16(PORTG_MUX, val) -#define bfin_read_PORTH_MUX() bfin_read16(PORTH_MUX) -#define bfin_write_PORTH_MUX(val) bfin_write16(PORTH_MUX, val) -#define bfin_read_PORTF_DRIVE() bfin_read16(PORTF_DRIVE) -#define bfin_write_PORTF_DRIVE(val) bfin_write16(PORTF_DRIVE, val) -#define bfin_read_PORTG_DRIVE() bfin_read16(PORTG_DRIVE) -#define bfin_write_PORTG_DRIVE(val) bfin_write16(PORTG_DRIVE, val) -#define bfin_read_PORTH_DRIVE() bfin_read16(PORTH_DRIVE) -#define bfin_write_PORTH_DRIVE(val) bfin_write16(PORTH_DRIVE, val) -#define bfin_read_PORTF_SLEW() bfin_read16(PORTF_SLEW) -#define bfin_write_PORTF_SLEW(val) bfin_write16(PORTF_SLEW, val) -#define bfin_read_PORTG_SLEW() bfin_read16(PORTG_SLEW) -#define bfin_write_PORTG_SLEW(val) bfin_write16(PORTG_SLEW, val) -#define bfin_read_PORTH_SLEW() bfin_read16(PORTH_SLEW) -#define bfin_write_PORTH_SLEW(val) bfin_write16(PORTH_SLEW, val) -#define bfin_read_PORTF_HYSTERESIS() bfin_read16(PORTF_HYSTERESIS) -#define bfin_write_PORTF_HYSTERESIS(val) bfin_write16(PORTF_HYSTERESIS, val) -#define bfin_read_PORTG_HYSTERESIS() bfin_read16(PORTG_HYSTERESIS) -#define bfin_write_PORTG_HYSTERESIS(val) bfin_write16(PORTG_HYSTERESIS, val) -#define bfin_read_PORTH_HYSTERESIS() bfin_read16(PORTH_HYSTERESIS) -#define bfin_write_PORTH_HYSTERESIS(val) bfin_write16(PORTH_HYSTERESIS, val) -#define bfin_read_NONGPIO_DRIVE() bfin_read16(NONGPIO_DRIVE) -#define bfin_write_NONGPIO_DRIVE(val) bfin_write16(NONGPIO_DRIVE, val) -#define bfin_read_NONGPIO_SLEW() bfin_read16(NONGPIO_SLEW) -#define bfin_write_NONGPIO_SLEW(val) bfin_write16(NONGPIO_SLEW, val) -#define bfin_read_NONGPIO_HYSTERESIS() bfin_read16(NONGPIO_HYSTERESIS) -#define bfin_write_NONGPIO_HYSTERESIS(val) bfin_write16(NONGPIO_HYSTERESIS, val) -#define bfin_read_HOST_CONTROL() bfin_read16(HOST_CONTROL) -#define bfin_write_HOST_CONTROL(val) bfin_write16(HOST_CONTROL, val) -#define bfin_read_HOST_STATUS() bfin_read16(HOST_STATUS) -#define bfin_write_HOST_STATUS(val) bfin_write16(HOST_STATUS, val) -#define bfin_read_HOST_TIMEOUT() bfin_read16(HOST_TIMEOUT) -#define bfin_write_HOST_TIMEOUT(val) bfin_write16(HOST_TIMEOUT, val) -#define bfin_read_CNT_CONFIG() bfin_read16(CNT_CONFIG) -#define bfin_write_CNT_CONFIG(val) bfin_write16(CNT_CONFIG, val) -#define bfin_read_CNT_IMASK() bfin_read16(CNT_IMASK) -#define bfin_write_CNT_IMASK(val) bfin_write16(CNT_IMASK, val) -#define bfin_read_CNT_STATUS() bfin_read16(CNT_STATUS) -#define bfin_write_CNT_STATUS(val) bfin_write16(CNT_STATUS, val) -#define bfin_read_CNT_COMMAND() bfin_read16(CNT_COMMAND) -#define bfin_write_CNT_COMMAND(val) bfin_write16(CNT_COMMAND, val) -#define bfin_read_CNT_DEBOUNCE() bfin_read16(CNT_DEBOUNCE) -#define bfin_write_CNT_DEBOUNCE(val) bfin_write16(CNT_DEBOUNCE, val) -#define bfin_read_CNT_COUNTER() bfin_read32(CNT_COUNTER) -#define bfin_write_CNT_COUNTER(val) bfin_write32(CNT_COUNTER, val) -#define bfin_read_CNT_MAX() bfin_read32(CNT_MAX) -#define bfin_write_CNT_MAX(val) bfin_write32(CNT_MAX, val) -#define bfin_read_CNT_MIN() bfin_read32(CNT_MIN) -#define bfin_write_CNT_MIN(val) bfin_write32(CNT_MIN, val) -#define bfin_read_OTP_CONTROL() bfin_read16(OTP_CONTROL) -#define bfin_write_OTP_CONTROL(val) bfin_write16(OTP_CONTROL, val) -#define bfin_read_OTP_BEN() bfin_read16(OTP_BEN) -#define bfin_write_OTP_BEN(val) bfin_write16(OTP_BEN, val) -#define bfin_read_OTP_STATUS() bfin_read16(OTP_STATUS) -#define bfin_write_OTP_STATUS(val) bfin_write16(OTP_STATUS, val) -#define bfin_read_OTP_TIMING() bfin_read32(OTP_TIMING) -#define bfin_write_OTP_TIMING(val) bfin_write32(OTP_TIMING, val) -#define bfin_read_SECURE_SYSSWT() bfin_read32(SECURE_SYSSWT) -#define bfin_write_SECURE_SYSSWT(val) bfin_write32(SECURE_SYSSWT, val) -#define bfin_read_SECURE_CONTROL() bfin_read16(SECURE_CONTROL) -#define bfin_write_SECURE_CONTROL(val) bfin_write16(SECURE_CONTROL, val) -#define bfin_read_SECURE_STATUS() bfin_read16(SECURE_STATUS) -#define bfin_write_SECURE_STATUS(val) bfin_write16(SECURE_STATUS, val) -#define bfin_read_OTP_DATA0() bfin_read32(OTP_DATA0) -#define bfin_write_OTP_DATA0(val) bfin_write32(OTP_DATA0, val) -#define bfin_read_OTP_DATA1() bfin_read32(OTP_DATA1) -#define bfin_write_OTP_DATA1(val) bfin_write32(OTP_DATA1, val) -#define bfin_read_OTP_DATA2() bfin_read32(OTP_DATA2) -#define bfin_write_OTP_DATA2(val) bfin_write32(OTP_DATA2, val) -#define bfin_read_OTP_DATA3() bfin_read32(OTP_DATA3) -#define bfin_write_OTP_DATA3(val) bfin_write32(OTP_DATA3, val) -#define bfin_read_NFC_CTL() bfin_read16(NFC_CTL) -#define bfin_write_NFC_CTL(val) bfin_write16(NFC_CTL, val) -#define bfin_read_NFC_STAT() bfin_read16(NFC_STAT) -#define bfin_write_NFC_STAT(val) bfin_write16(NFC_STAT, val) -#define bfin_read_NFC_IRQSTAT() bfin_read16(NFC_IRQSTAT) -#define bfin_write_NFC_IRQSTAT(val) bfin_write16(NFC_IRQSTAT, val) -#define bfin_read_NFC_IRQMASK() bfin_read16(NFC_IRQMASK) -#define bfin_write_NFC_IRQMASK(val) bfin_write16(NFC_IRQMASK, val) -#define bfin_read_NFC_ECC0() bfin_read16(NFC_ECC0) -#define bfin_write_NFC_ECC0(val) bfin_write16(NFC_ECC0, val) -#define bfin_read_NFC_ECC1() bfin_read16(NFC_ECC1) -#define bfin_write_NFC_ECC1(val) bfin_write16(NFC_ECC1, val) -#define bfin_read_NFC_ECC2() bfin_read16(NFC_ECC2) -#define bfin_write_NFC_ECC2(val) bfin_write16(NFC_ECC2, val) -#define bfin_read_NFC_ECC3() bfin_read16(NFC_ECC3) -#define bfin_write_NFC_ECC3(val) bfin_write16(NFC_ECC3, val) -#define bfin_read_NFC_COUNT() bfin_read16(NFC_COUNT) -#define bfin_write_NFC_COUNT(val) bfin_write16(NFC_COUNT, val) -#define bfin_read_NFC_RST() bfin_read16(NFC_RST) -#define bfin_write_NFC_RST(val) bfin_write16(NFC_RST, val) -#define bfin_read_NFC_PGCTL() bfin_read16(NFC_PGCTL) -#define bfin_write_NFC_PGCTL(val) bfin_write16(NFC_PGCTL, val) -#define bfin_read_NFC_READ() bfin_read16(NFC_READ) -#define bfin_write_NFC_READ(val) bfin_write16(NFC_READ, val) -#define bfin_read_NFC_ADDR() bfin_read16(NFC_ADDR) -#define bfin_write_NFC_ADDR(val) bfin_write16(NFC_ADDR, val) -#define bfin_read_NFC_CMD() bfin_read16(NFC_CMD) -#define bfin_write_NFC_CMD(val) bfin_write16(NFC_CMD, val) -#define bfin_read_NFC_DATA_WR() bfin_read16(NFC_DATA_WR) -#define bfin_write_NFC_DATA_WR(val) bfin_write16(NFC_DATA_WR, val) -#define bfin_read_NFC_DATA_RD() bfin_read16(NFC_DATA_RD) -#define bfin_write_NFC_DATA_RD(val) bfin_write16(NFC_DATA_RD, val) -#define bfin_read_DMA_TC_CNT() bfin_read16(DMA_TC_CNT) -#define bfin_write_DMA_TC_CNT(val) bfin_write16(DMA_TC_CNT, val) -#define bfin_read_DMA_TC_PER() bfin_read16(DMA_TC_PER) -#define bfin_write_DMA_TC_PER(val) bfin_write16(DMA_TC_PER, val) - -#endif /* __BFIN_CDEF_ADSP_EDN_BF52x_extended__ */ diff --git a/arch/blackfin/include/asm/mach-bf527/ADSP-EDN-BF52x-extended_def.h b/arch/blackfin/include/asm/mach-bf527/ADSP-EDN-BF52x-extended_def.h deleted file mode 100644 index 7b97aee..0000000 --- a/arch/blackfin/include/asm/mach-bf527/ADSP-EDN-BF52x-extended_def.h +++ /dev/null @@ -1,503 +0,0 @@ -/* DO NOT EDIT THIS FILE - * Automatically generated by generate-def-headers.xsl - * DO NOT EDIT THIS FILE - */ - -#ifndef __BFIN_DEF_ADSP_EDN_BF52x_extended__ -#define __BFIN_DEF_ADSP_EDN_BF52x_extended__ - -#define SIC_RVECT 0xFFC00108 /* Interrupt Reset Vector Address Register */ -#define SIC_IMASK0 0xFFC0010C /* Interrupt Mask Register */ -#define SIC_IAR0 0xFFC00110 /* Interrupt Assignment Register 0 */ -#define SIC_IAR1 0xFFC00114 /* Interrupt Assignment Register 1 */ -#define SIC_IAR2 0xFFC00118 /* Interrupt Assignment Register 2 */ -#define SIC_IAR3 0xFFC0011C /* Interrupt Assignment Register 3 */ -#define SIC_ISR0 0xFFC00120 /* Interrupt Status Register */ -#define SIC_IWR0 0xFFC00124 /* Interrupt Wakeup Register */ -#define SIC_IMASK1 0xFFC0014C /* Interrupt Mask register of SIC2 */ -#define SIC_IAR4 0xFFC00150 /* Interrupt Assignment register4 */ -#define SIC_IAR5 0xFFC00154 /* Interrupt Assignment register5 */ -#define SIC_IAR6 0xFFC00158 /* Interrupt Assignment register6 */ -#define SIC_IAR7 0xFFC0015C /* Interrupt Assignment register7 */ -#define SIC_ISR1 0xFFC00160 /* Interrupt Status register */ -#define SIC_IWR1 0xFFC00164 /* Interrupt Wakeup register */ -#define WDOG_CTL 0xFFC00200 /* Watchdog Control Register */ -#define WDOG_CNT 0xFFC00204 /* Watchdog Count Register */ -#define WDOG_STAT 0xFFC00208 /* Watchdog Status Register */ -#define RTC_STAT 0xFFC00300 /* RTC Status Register */ -#define RTC_ICTL 0xFFC00304 /* RTC Interrupt Control Register */ -#define RTC_ISTAT 0xFFC00308 /* RTC Interrupt Status Register */ -#define RTC_SWCNT 0xFFC0030C /* RTC Stopwatch Count Register */ -#define RTC_ALARM 0xFFC00310 /* RTC Alarm Time Register */ -#define RTC_PREN 0xFFC00314 /* RTC Prescaler Enable Register */ -#define UART0_THR 0xFFC00400 /* Transmit Holding register */ -#define UART0_RBR 0xFFC00400 /* Receive Buffer register */ -#define UART0_DLL 0xFFC00400 /* Divisor Latch (Low-Byte) */ -#define UART0_IER 0xFFC00404 /* Interrupt Enable Register */ -#define UART0_DLH 0xFFC00404 /* Divisor Latch (High-Byte) */ -#define UART0_IIR 0xFFC00408 /* Interrupt Identification Register */ -#define UART0_LCR 0xFFC0040C /* Line Control Register */ -#define UART0_MCR 0xFFC00410 /* Modem Control Register */ -#define UART0_LSR 0xFFC00414 /* Line Status Register */ -#define UART0_MSR 0xFFC00418 /* Modem Status Register */ -#define UART0_SCR 0xFFC0041C /* SCR Scratch Register */ -#define UART0_GCTL 0xFFC00424 /* Global Control Register */ -#define SPI_CTL 0xFFC00500 /* SPI Control Register */ -#define SPI_FLG 0xFFC00504 /* SPI Flag register */ -#define SPI_STAT 0xFFC00508 /* SPI Status register */ -#define SPI_TDBR 0xFFC0050C /* SPI Transmit Data Buffer Register */ -#define SPI_RDBR 0xFFC00510 /* SPI Receive Data Buffer Register */ -#define SPI_BAUD 0xFFC00514 /* SPI Baud rate Register */ -#define SPI_SHADOW 0xFFC00518 /* SPI_RDBR Shadow Register */ -#define TIMER0_CONFIG 0xFFC00600 /* Timer 0 Configuration Register */ -#define TIMER0_COUNTER 0xFFC00604 /* Timer 0 Counter Register */ -#define TIMER0_PERIOD 0xFFC00608 /* Timer 0 Period Register */ -#define TIMER0_WIDTH 0xFFC0060C /* Timer 0 Width Register */ -#define TIMER1_CONFIG 0xFFC00610 /* Timer 1 Configuration Register */ -#define TIMER1_COUNTER 0xFFC00614 /* Timer 1 Counter Register */ -#define TIMER1_PERIOD 0xFFC00618 /* Timer 1 Period Register */ -#define TIMER1_WIDTH 0xFFC0061C /* Timer 1 Width Register */ -#define TIMER2_CONFIG 0xFFC00620 /* Timer 2 Configuration Register */ -#define TIMER2_COUNTER 0xFFC00624 /* Timer 2 Counter Register */ -#define TIMER2_PERIOD 0xFFC00628 /* Timer 2 Period Register */ -#define TIMER2_WIDTH 0xFFC0062C /* Timer 2 Width Register */ -#define TIMER3_CONFIG 0xFFC00630 /* Timer 3 Configuration Register */ -#define TIMER3_COUNTER 0xFFC00634 /* Timer 3 Counter Register */ -#define TIMER3_PERIOD 0xFFC00638 /* Timer 3 Period Register */ -#define TIMER3_WIDTH 0xFFC0063C /* Timer 3 Width Register */ -#define TIMER4_CONFIG 0xFFC00640 /* Timer 4 Configuration Register */ -#define TIMER4_COUNTER 0xFFC00644 /* Timer 4 Counter Register */ -#define TIMER4_PERIOD 0xFFC00648 /* Timer 4 Period Register */ -#define TIMER4_WIDTH 0xFFC0064C /* Timer 4 Width Register */ -#define TIMER5_CONFIG 0xFFC00650 /* Timer 5 Configuration Register */ -#define TIMER5_COUNTER 0xFFC00654 /* Timer 5 Counter Register */ -#define TIMER5_PERIOD 0xFFC00658 /* Timer 5 Period Register */ -#define TIMER5_WIDTH 0xFFC0065C /* Timer 5 Width Register */ -#define TIMER6_CONFIG 0xFFC00660 /* Timer 6 Configuration Register */ -#define TIMER6_COUNTER 0xFFC00664 /* Timer 6 Counter Register */ -#define TIMER6_PERIOD 0xFFC00668 /* Timer 6 Period Register */ -#define TIMER6_WIDTH 0xFFC0066C /* Timer 6 Width Register\n */ -#define TIMER7_CONFIG 0xFFC00670 /* Timer 7 Configuration Register */ -#define TIMER7_COUNTER 0xFFC00674 /* Timer 7 Counter Register */ -#define TIMER7_PERIOD 0xFFC00678 /* Timer 7 Period Register */ -#define TIMER7_WIDTH 0xFFC0067C /* Timer 7 Width Register */ -#define TIMER_ENABLE 0xFFC00680 /* Timer Enable Register */ -#define TIMER_DISABLE 0xFFC00684 /* Timer Disable Register */ -#define TIMER_STATUS 0xFFC00688 /* Timer Status Register */ -#define PORTFIO 0xFFC00700 /* Port F I/O Pin State Specify Register */ -#define PORTFIO_CLEAR 0xFFC00704 /* Port F I/O Peripheral Interrupt Clear Register */ -#define PORTFIO_SET 0xFFC00708 /* Port F I/O Peripheral Interrupt Set Register */ -#define PORTFIO_TOGGLE 0xFFC0070C /* Port F I/O Pin State Toggle Register */ -#define PORTFIO_MASKA 0xFFC00710 /* Port F I/O Mask State Specify Interrupt A Register */ -#define PORTFIO_MASKA_CLEAR 0xFFC00714 /* Port F I/O Mask Disable Interrupt A Register */ -#define PORTFIO_MASKA_SET 0xFFC00718 /* Port F I/O Mask Enable Interrupt A Register */ -#define PORTFIO_MASKA_TOGGLE 0xFFC0071C /* Port F I/O Mask Toggle Enable Interrupt A Register */ -#define PORTFIO_MASKB 0xFFC00720 /* Port F I/O Mask State Specify Interrupt B Register */ -#define PORTFIO_MASKB_CLEAR 0xFFC00724 /* Port F I/O Mask Disable Interrupt B Register */ -#define PORTFIO_MASKB_SET 0xFFC00728 /* Port F I/O Mask Enable Interrupt B Register */ -#define PORTFIO_MASKB_TOGGLE 0xFFC0072C /* Port F I/O Mask Toggle Enable Interrupt B Register */ -#define PORTFIO_DIR 0xFFC00730 /* Port F I/O Direction Register */ -#define PORTFIO_POLAR 0xFFC00734 /* Port F I/O Source Polarity Register */ -#define PORTFIO_EDGE 0xFFC00738 /* Port F I/O Source Sensitivity Register */ -#define PORTFIO_BOTH 0xFFC0073C /* Port F I/O Set on BOTH Edges Register */ -#define PORTFIO_INEN 0xFFC00740 /* Port F I/O Input Enable Register */ -#define SPORT0_TCR1 0xFFC00800 /* SPORT0 Transmit Configuration 1 Register */ -#define SPORT0_TCR2 0xFFC00804 /* SPORT0 Transmit Configuration 2 Register */ -#define SPORT0_TCLKDIV 0xFFC00808 /* SPORT0 Transmit Clock Divider */ -#define SPORT0_TFSDIV 0xFFC0080C /* SPORT0 Transmit Frame Sync Divider */ -#define SPORT0_TX 0xFFC00810 /* SPORT0 TX Data Register */ -#define SPORT0_RX 0xFFC00818 /* SPORT0 RX Data Register */ -#define SPORT0_RCR1 0xFFC00820 /* SPORT0 Transmit Configuration 1 Register */ -#define SPORT0_RCR2 0xFFC00824 /* SPORT0 Transmit Configuration 2 Register */ -#define SPORT0_RCLKDIV 0xFFC00828 /* SPORT0 Receive Clock Divider */ -#define SPORT0_RFSDIV 0xFFC0082C /* SPORT0 Receive Frame Sync Divider */ -#define SPORT0_STAT 0xFFC00830 /* SPORT0 Status Register */ -#define SPORT0_CHNL 0xFFC00834 /* SPORT0 Current Channel Register */ -#define SPORT0_MCMC1 0xFFC00838 /* SPORT0 Multi-Channel Configuration Register 1 */ -#define SPORT0_MCMC2 0xFFC0083C /* SPORT0 Multi-Channel Configuration Register 2 */ -#define SPORT0_MTCS0 0xFFC00840 /* SPORT0 Multi-Channel Transmit Select Register 0 */ -#define SPORT0_MTCS1 0xFFC00844 /* SPORT0 Multi-Channel Transmit Select Register 1 */ -#define SPORT0_MTCS2 0xFFC00848 /* SPORT0 Multi-Channel Transmit Select Register 2 */ -#define SPORT0_MTCS3 0xFFC0084C /* SPORT0 Multi-Channel Transmit Select Register 3 */ -#define SPORT0_MRCS0 0xFFC00850 /* SPORT0 Multi-Channel Receive Select Register 0 */ -#define SPORT0_MRCS1 0xFFC00854 /* SPORT0 Multi-Channel Receive Select Register 1 */ -#define SPORT0_MRCS2 0xFFC00858 /* SPORT0 Multi-Channel Receive Select Register 2 */ -#define SPORT0_MRCS3 0xFFC0085C /* SPORT0 Multi-Channel Receive Select Register 3 */ -#define SPORT1_TCR1 0xFFC00900 /* SPORT1 Transmit Configuration 1 Register */ -#define SPORT1_TCR2 0xFFC00904 /* SPORT1 Transmit Configuration 2 Register */ -#define SPORT1_TCLKDIV 0xFFC00908 /* SPORT1 Transmit Clock Divider */ -#define SPORT1_TFSDIV 0xFFC0090C /* SPORT1 Transmit Frame Sync Divider */ -#define SPORT1_TX 0xFFC00910 /* SPORT1 TX Data Register */ -#define SPORT1_RX 0xFFC00918 /* SPORT1 RX Data Register */ -#define SPORT1_RCR1 0xFFC00920 /* SPORT1 Transmit Configuration 1 Register */ -#define SPORT1_RCR2 0xFFC00924 /* SPORT1 Transmit Configuration 2 Register */ -#define SPORT1_RCLKDIV 0xFFC00928 /* SPORT1 Receive Clock Divider */ -#define SPORT1_RFSDIV 0xFFC0092C /* SPORT1 Receive Frame Sync Divider */ -#define SPORT1_STAT 0xFFC00930 /* SPORT1 Status Register */ -#define SPORT1_CHNL 0xFFC00934 /* SPORT1 Current Channel Register */ -#define SPORT1_MCMC1 0xFFC00938 /* SPORT1 Multi-Channel Configuration Register 1 */ -#define SPORT1_MCMC2 0xFFC0093C /* SPORT1 Multi-Channel Configuration Register 2 */ -#define SPORT1_MTCS0 0xFFC00940 /* SPORT1 Multi-Channel Transmit Select Register 0 */ -#define SPORT1_MTCS1 0xFFC00944 /* SPORT1 Multi-Channel Transmit Select Register 1 */ -#define SPORT1_MTCS2 0xFFC00948 /* SPORT1 Multi-Channel Transmit Select Register 2 */ -#define SPORT1_MTCS3 0xFFC0094C /* SPORT1 Multi-Channel Transmit Select Register 3 */ -#define SPORT1_MRCS0 0xFFC00950 /* SPORT1 Multi-Channel Receive Select Register 0 */ -#define SPORT1_MRCS1 0xFFC00954 /* SPORT1 Multi-Channel Receive Select Register 1 */ -#define SPORT1_MRCS2 0xFFC00958 /* SPORT1 Multi-Channel Receive Select Register 2 */ -#define SPORT1_MRCS3 0xFFC0095C /* SPORT1 Multi-Channel Receive Select Register 3 */ -#define EBIU_AMGCTL 0xFFC00A00 /* Asynchronous Memory Global Control Register */ -#define EBIU_AMBCTL0 0xFFC00A04 /* Asynchronous Memory Bank Control Register 0 */ -#define EBIU_AMBCTL1 0xFFC00A08 /* Asynchronous Memory Bank Control Register 1 */ -#define EBIU_SDGCTL 0xFFC00A10 /* SDRAM Global Control Register */ -#define EBIU_SDBCTL 0xFFC00A14 /* SDRAM Bank Control Register */ -#define EBIU_SDRRC 0xFFC00A18 /* SDRAM Refresh Rate Control Register */ -#define EBIU_SDSTAT 0xFFC00A1C /* SDRAM Status Register */ -#define DMA0_NEXT_DESC_PTR 0xFFC00C00 /* DMA Channel 0 Next Descriptor Pointer Register */ -#define DMA0_START_ADDR 0xFFC00C04 /* DMA Channel 0 Start Address Register */ -#define DMA0_CONFIG 0xFFC00C08 /* DMA Channel 0 Configuration Register */ -#define DMA0_X_COUNT 0xFFC00C10 /* DMA Channel 0 X Count Register */ -#define DMA0_X_MODIFY 0xFFC00C14 /* DMA Channel 0 X Modify Register */ -#define DMA0_Y_COUNT 0xFFC00C18 /* DMA Channel 0 Y Count Register */ -#define DMA0_Y_MODIFY 0xFFC00C1C /* DMA Channel 0 Y Modify Register */ -#define DMA0_CURR_DESC_PTR 0xFFC00C20 /* DMA Channel 0 Current Descriptor Pointer Register */ -#define DMA0_CURR_ADDR 0xFFC00C24 /* DMA Channel 0 Current Address Register */ -#define DMA0_IRQ_STATUS 0xFFC00C28 /* DMA Channel 0 Interrupt/Status Register */ -#define DMA0_PERIPHERAL_MAP 0xFFC00C2C /* DMA Channel 0 Peripheral Map Register */ -#define DMA0_CURR_X_COUNT 0xFFC00C30 /* DMA Channel 0 Current X Count Register */ -#define DMA0_CURR_Y_COUNT 0xFFC00C38 /* DMA Channel 0 Current Y Count Register */ -#define DMA1_NEXT_DESC_PTR 0xFFC00C40 /* DMA Channel 1 Next Descriptor Pointer Register */ -#define DMA1_START_ADDR 0xFFC00C44 /* DMA Channel 1 Start Address Register */ -#define DMA1_CONFIG 0xFFC00C48 /* DMA Channel 1 Configuration Register */ -#define DMA1_X_COUNT 0xFFC00C50 /* DMA Channel 1 X Count Register */ -#define DMA1_X_MODIFY 0xFFC00C54 /* DMA Channel 1 X Modify Register */ -#define DMA1_Y_COUNT 0xFFC00C58 /* DMA Channel 1 Y Count Register */ -#define DMA1_Y_MODIFY 0xFFC00C5C /* DMA Channel 1 Y Modify Register */ -#define DMA1_CURR_DESC_PTR 0xFFC00C60 /* DMA Channel 1 Current Descriptor Pointer Register */ -#define DMA1_CURR_ADDR 0xFFC00C64 /* DMA Channel 1 Current Address Register */ -#define DMA1_IRQ_STATUS 0xFFC00C68 /* DMA Channel 1 Interrupt/Status Register */ -#define DMA1_PERIPHERAL_MAP 0xFFC00C6C /* DMA Channel 1 Peripheral Map Register */ -#define DMA1_CURR_X_COUNT 0xFFC00C70 /* DMA Channel 1 Current X Count Register */ -#define DMA1_CURR_Y_COUNT 0xFFC00C78 /* DMA Channel 1 Current Y Count Register */ -#define DMA2_NEXT_DESC_PTR 0xFFC00C80 /* DMA Channel 2 Next Descriptor Pointer Register */ -#define DMA2_START_ADDR 0xFFC00C84 /* DMA Channel 2 Start Address Register */ -#define DMA2_CONFIG 0xFFC00C88 /* DMA Channel 2 Configuration Register */ -#define DMA2_X_COUNT 0xFFC00C90 /* DMA Channel 2 X Count Register */ -#define DMA2_X_MODIFY 0xFFC00C94 /* DMA Channel 2 X Modify Register */ -#define DMA2_Y_COUNT 0xFFC00C98 /* DMA Channel 2 Y Count Register */ -#define DMA2_Y_MODIFY 0xFFC00C9C /* DMA Channel 2 Y Modify Register */ -#define DMA2_CURR_DESC_PTR 0xFFC00CA0 /* DMA Channel 2 Current Descriptor Pointer Register */ -#define DMA2_CURR_ADDR 0xFFC00CA4 /* DMA Channel 2 Current Address Register */ -#define DMA2_IRQ_STATUS 0xFFC00CA8 /* DMA Channel 2 Interrupt/Status Register */ -#define DMA2_PERIPHERAL_MAP 0xFFC00CAC /* DMA Channel 2 Peripheral Map Register */ -#define DMA2_CURR_X_COUNT 0xFFC00CB0 /* DMA Channel 2 Current X Count Register */ -#define DMA2_CURR_Y_COUNT 0xFFC00CB8 /* DMA Channel 2 Current Y Count Register */ -#define DMA3_NEXT_DESC_PTR 0xFFC00CC0 /* DMA Channel 3 Next Descriptor Pointer Register */ -#define DMA3_START_ADDR 0xFFC00CC4 /* DMA Channel 3 Start Address Register */ -#define DMA3_CONFIG 0xFFC00CC8 /* DMA Channel 3 Configuration Register */ -#define DMA3_X_COUNT 0xFFC00CD0 /* DMA Channel 3 X Count Register */ -#define DMA3_X_MODIFY 0xFFC00CD4 /* DMA Channel 3 X Modify Register */ -#define DMA3_Y_COUNT 0xFFC00CD8 /* DMA Channel 3 Y Count Register */ -#define DMA3_Y_MODIFY 0xFFC00CDC /* DMA Channel 3 Y Modify Register */ -#define DMA3_CURR_DESC_PTR 0xFFC00CE0 /* DMA Channel 3 Current Descriptor Pointer Register */ -#define DMA3_CURR_ADDR 0xFFC00CE4 /* DMA Channel 3 Current Address Register */ -#define DMA3_IRQ_STATUS 0xFFC00CE8 /* DMA Channel 3 Interrupt/Status Register */ -#define DMA3_PERIPHERAL_MAP 0xFFC00CEC /* DMA Channel 3 Peripheral Map Register */ -#define DMA3_CURR_X_COUNT 0xFFC00CF0 /* DMA Channel 3 Current X Count Register */ -#define DMA3_CURR_Y_COUNT 0xFFC00CF8 /* DMA Channel 3 Current Y Count Register */ -#define DMA4_NEXT_DESC_PTR 0xFFC00D00 /* DMA Channel 4 Next Descriptor Pointer Register */ -#define DMA4_START_ADDR 0xFFC00D04 /* DMA Channel 4 Start Address Register */ -#define DMA4_CONFIG 0xFFC00D08 /* DMA Channel 4 Configuration Register */ -#define DMA4_X_COUNT 0xFFC00D10 /* DMA Channel 4 X Count Register */ -#define DMA4_X_MODIFY 0xFFC00D14 /* DMA Channel 4 X Modify Register */ -#define DMA4_Y_COUNT 0xFFC00D18 /* DMA Channel 4 Y Count Register */ -#define DMA4_Y_MODIFY 0xFFC00D1C /* DMA Channel 4 Y Modify Register */ -#define DMA4_CURR_DESC_PTR 0xFFC00D20 /* DMA Channel 4 Current Descriptor Pointer Register */ -#define DMA4_CURR_ADDR 0xFFC00D24 /* DMA Channel 4 Current Address Register */ -#define DMA4_IRQ_STATUS 0xFFC00D28 /* DMA Channel 4 Interrupt/Status Register */ -#define DMA4_PERIPHERAL_MAP 0xFFC00D2C /* DMA Channel 4 Peripheral Map Register */ -#define DMA4_CURR_X_COUNT 0xFFC00D30 /* DMA Channel 4 Current X Count Register */ -#define DMA4_CURR_Y_COUNT 0xFFC00D38 /* DMA Channel 4 Current Y Count Register */ -#define DMA5_NEXT_DESC_PTR 0xFFC00D40 /* DMA Channel 5 Next Descriptor Pointer Register */ -#define DMA5_START_ADDR 0xFFC00D44 /* DMA Channel 5 Start Address Register */ -#define DMA5_CONFIG 0xFFC00D48 /* DMA Channel 5 Configuration Register */ -#define DMA5_X_COUNT 0xFFC00D50 /* DMA Channel 5 X Count Register */ -#define DMA5_X_MODIFY 0xFFC00D54 /* DMA Channel 5 X Modify Register */ -#define DMA5_Y_COUNT 0xFFC00D58 /* DMA Channel 5 Y Count Register */ -#define DMA5_Y_MODIFY 0xFFC00D5C /* DMA Channel 5 Y Modify Register */ -#define DMA5_CURR_DESC_PTR 0xFFC00D60 /* DMA Channel 5 Current Descriptor Pointer Register */ -#define DMA5_CURR_ADDR 0xFFC00D64 /* DMA Channel 5 Current Address Register */ -#define DMA5_IRQ_STATUS 0xFFC00D68 /* DMA Channel 5 Interrupt/Status Register */ -#define DMA5_PERIPHERAL_MAP 0xFFC00D6C /* DMA Channel 5 Peripheral Map Register */ -#define DMA5_CURR_X_COUNT 0xFFC00D70 /* DMA Channel 5 Current X Count Register */ -#define DMA5_CURR_Y_COUNT 0xFFC00D78 /* DMA Channel 5 Current Y Count Register */ -#define DMA6_NEXT_DESC_PTR 0xFFC00D80 /* DMA Channel 6 Next Descriptor Pointer Register */ -#define DMA6_START_ADDR 0xFFC00D84 /* DMA Channel 6 Start Address Register */ -#define DMA6_CONFIG 0xFFC00D88 /* DMA Channel 6 Configuration Register */ -#define DMA6_X_COUNT 0xFFC00D90 /* DMA Channel 6 X Count Register */ -#define DMA6_X_MODIFY 0xFFC00D94 /* DMA Channel 6 X Modify Register */ -#define DMA6_Y_COUNT 0xFFC00D98 /* DMA Channel 6 Y Count Register */ -#define DMA6_Y_MODIFY 0xFFC00D9C /* DMA Channel 6 Y Modify Register */ -#define DMA6_CURR_DESC_PTR 0xFFC00DA0 /* DMA Channel 6 Current Descriptor Pointer Register */ -#define DMA6_CURR_ADDR 0xFFC00DA4 /* DMA Channel 6 Current Address Register */ -#define DMA6_IRQ_STATUS 0xFFC00DA8 /* DMA Channel 6 Interrupt/Status Register */ -#define DMA6_PERIPHERAL_MAP 0xFFC00DAC /* DMA Channel 6 Peripheral Map Register */ -#define DMA6_CURR_X_COUNT 0xFFC00DB0 /* DMA Channel 6 Current X Count Register */ -#define DMA6_CURR_Y_COUNT 0xFFC00DB8 /* DMA Channel 6 Current Y Count Register */ -#define DMA7_NEXT_DESC_PTR 0xFFC00DC0 /* DMA Channel 7 Next Descriptor Pointer Register */ -#define DMA7_START_ADDR 0xFFC00DC4 /* DMA Channel 7 Start Address Register */ -#define DMA7_CONFIG 0xFFC00DC8 /* DMA Channel 7 Configuration Register */ -#define DMA7_X_COUNT 0xFFC00DD0 /* DMA Channel 7 X Count Register */ -#define DMA7_X_MODIFY 0xFFC00DD4 /* DMA Channel 7 X Modify Register */ -#define DMA7_Y_COUNT 0xFFC00DD8 /* DMA Channel 7 Y Count Register */ -#define DMA7_Y_MODIFY 0xFFC00DDC /* DMA Channel 7 Y Modify Register */ -#define DMA7_CURR_DESC_PTR 0xFFC00DE0 /* DMA Channel 7 Current Descriptor Pointer Register */ -#define DMA7_CURR_ADDR 0xFFC00DE4 /* DMA Channel 7 Current Address Register */ -#define DMA7_IRQ_STATUS 0xFFC00DE8 /* DMA Channel 7 Interrupt/Status Register */ -#define DMA7_PERIPHERAL_MAP 0xFFC00DEC /* DMA Channel 7 Peripheral Map Register */ -#define DMA7_CURR_X_COUNT 0xFFC00DF0 /* DMA Channel 7 Current X Count Register */ -#define DMA7_CURR_Y_COUNT 0xFFC00DF8 /* DMA Channel 7 Current Y Count Register */ -#define DMA8_NEXT_DESC_PTR 0xFFC00E00 /* DMA Channel 8 Next Descriptor Pointer Register */ -#define DMA8_START_ADDR 0xFFC00E04 /* DMA Channel 8 Start Address Register */ -#define DMA8_CONFIG 0xFFC00E08 /* DMA Channel 8 Configuration Register */ -#define DMA8_X_COUNT 0xFFC00E10 /* DMA Channel 8 X Count Register */ -#define DMA8_X_MODIFY 0xFFC00E14 /* DMA Channel 8 X Modify Register */ -#define DMA8_Y_COUNT 0xFFC00E18 /* DMA Channel 8 Y Count Register */ -#define DMA8_Y_MODIFY 0xFFC00E1C /* DMA Channel 8 Y Modify Register */ -#define DMA8_CURR_DESC_PTR 0xFFC00E20 /* DMA Channel 8 Current Descriptor Pointer Register */ -#define DMA8_CURR_ADDR 0xFFC00E24 /* DMA Channel 8 Current Address Register */ -#define DMA8_IRQ_STATUS 0xFFC00E28 /* DMA Channel 8 Interrupt/Status Register */ -#define DMA8_PERIPHERAL_MAP 0xFFC00E2C /* DMA Channel 8 Peripheral Map Register */ -#define DMA8_CURR_X_COUNT 0xFFC00E30 /* DMA Channel 8 Current X Count Register */ -#define DMA8_CURR_Y_COUNT 0xFFC00E38 /* DMA Channel 8 Current Y Count Register */ -#define DMA9_NEXT_DESC_PTR 0xFFC00E40 /* DMA Channel 9 Next Descriptor Pointer Register */ -#define DMA9_START_ADDR 0xFFC00E44 /* DMA Channel 9 Start Address Register */ -#define DMA9_CONFIG 0xFFC00E48 /* DMA Channel 9 Configuration Register */ -#define DMA9_X_COUNT 0xFFC00E50 /* DMA Channel 9 X Count Register */ -#define DMA9_X_MODIFY 0xFFC00E54 /* DMA Channel 9 X Modify Register */ -#define DMA9_Y_COUNT 0xFFC00E58 /* DMA Channel 9 Y Count Register */ -#define DMA9_Y_MODIFY 0xFFC00E5C /* DMA Channel 9 Y Modify Register */ -#define DMA9_CURR_DESC_PTR 0xFFC00E60 /* DMA Channel 9 Current Descriptor Pointer Register */ -#define DMA9_CURR_ADDR 0xFFC00E64 /* DMA Channel 9 Current Address Register */ -#define DMA9_IRQ_STATUS 0xFFC00E68 /* DMA Channel 9 Interrupt/Status Register */ -#define DMA9_PERIPHERAL_MAP 0xFFC00E6C /* DMA Channel 9 Peripheral Map Register */ -#define DMA9_CURR_X_COUNT 0xFFC00E70 /* DMA Channel 9 Current X Count Register */ -#define DMA9_CURR_Y_COUNT 0xFFC00E78 /* DMA Channel 9 Current Y Count Register */ -#define DMA10_NEXT_DESC_PTR 0xFFC00E80 /* DMA Channel 10 Next Descriptor Pointer Register */ -#define DMA10_START_ADDR 0xFFC00E84 /* DMA Channel 10 Start Address Register */ -#define DMA10_CONFIG 0xFFC00E88 /* DMA Channel 10 Configuration Register */ -#define DMA10_X_COUNT 0xFFC00E90 /* DMA Channel 10 X Count Register */ -#define DMA10_X_MODIFY 0xFFC00E94 /* DMA Channel 10 X Modify Register */ -#define DMA10_Y_COUNT 0xFFC00E98 /* DMA Channel 10 Y Count Register */ -#define DMA10_Y_MODIFY 0xFFC00E9C /* DMA Channel 10 Y Modify Register */ -#define DMA10_CURR_DESC_PTR 0xFFC00EA0 /* DMA Channel 10 Current Descriptor Pointer Register */ -#define DMA10_CURR_ADDR 0xFFC00EA4 /* DMA Channel 10 Current Address Register */ -#define DMA10_IRQ_STATUS 0xFFC00EA8 /* DMA Channel 10 Interrupt/Status Register */ -#define DMA10_PERIPHERAL_MAP 0xFFC00EAC /* DMA Channel 10 Peripheral Map Register */ -#define DMA10_CURR_X_COUNT 0xFFC00EB0 /* DMA Channel 10 Current X Count Register */ -#define DMA10_CURR_Y_COUNT 0xFFC00EB8 /* DMA Channel 10 Current Y Count Register */ -#define DMA11_NEXT_DESC_PTR 0xFFC00EC0 /* DMA Channel 11 Next Descriptor Pointer Register */ -#define DMA11_START_ADDR 0xFFC00EC4 /* DMA Channel 11 Start Address Register */ -#define DMA11_CONFIG 0xFFC00EC8 /* DMA Channel 11 Configuration Register */ -#define DMA11_X_COUNT 0xFFC00ED0 /* DMA Channel 11 X Count Register */ -#define DMA11_X_MODIFY 0xFFC00ED4 /* DMA Channel 11 X Modify Register */ -#define DMA11_Y_COUNT 0xFFC00ED8 /* DMA Channel 11 Y Count Register */ -#define DMA11_Y_MODIFY 0xFFC00EDC /* DMA Channel 11 Y Modify Register */ -#define DMA11_CURR_DESC_PTR 0xFFC00EE0 /* DMA Channel 11 Current Descriptor Pointer Register */ -#define DMA11_CURR_ADDR 0xFFC00EE4 /* DMA Channel 11 Current Address Register */ -#define DMA11_IRQ_STATUS 0xFFC00EE8 /* DMA Channel 11 Interrupt/Status Register */ -#define DMA11_PERIPHERAL_MAP 0xFFC00EEC /* DMA Channel 11 Peripheral Map Register */ -#define DMA11_CURR_X_COUNT 0xFFC00EF0 /* DMA Channel 11 Current X Count Register */ -#define DMA11_CURR_Y_COUNT 0xFFC00EF8 /* DMA Channel 11 Current Y Count Register */ -#define MDMA_S0_NEXT_DESC_PTR 0xFFC00F40 /* MemDMA Stream 0 Source Next Descriptor Pointer Register */ -#define MDMA_S0_START_ADDR 0xFFC00F44 /* MemDMA Stream 0 Source Start Address Register */ -#define MDMA_S0_CONFIG 0xFFC00F48 /* MemDMA Stream 0 Source Configuration Register */ -#define MDMA_S0_X_COUNT 0xFFC00F50 /* MemDMA Stream 0 Source X Count Register */ -#define MDMA_S0_X_MODIFY 0xFFC00F54 /* MemDMA Stream 0 Source X Modify Register */ -#define MDMA_S0_Y_COUNT 0xFFC00F58 /* MemDMA Stream 0 Source Y Count Register */ -#define MDMA_S0_Y_MODIFY 0xFFC00F5C /* MemDMA Stream 0 Source Y Modify Register */ -#define MDMA_S0_CURR_DESC_PTR 0xFFC00F60 /* MemDMA Stream 0 Source Current Descriptor Pointer Register */ -#define MDMA_S0_CURR_ADDR 0xFFC00F64 /* MemDMA Stream 0 Source Current Address Register */ -#define MDMA_S0_IRQ_STATUS 0xFFC00F68 /* MemDMA Stream 0 Source Interrupt/Status Register */ -#define MDMA_S0_PERIPHERAL_MAP 0xFFC00F6C /* MemDMA Stream 0 Source Peripheral Map Register */ -#define MDMA_S0_CURR_X_COUNT 0xFFC00F70 /* MemDMA Stream 0 Source Current X Count Register */ -#define MDMA_S0_CURR_Y_COUNT 0xFFC00F78 /* MemDMA Stream 0 Source Current Y Count Register */ -#define MDMA_D0_NEXT_DESC_PTR 0xFFC00F00 /* MemDMA Stream 0 Destination Next Descriptor Pointer Register */ -#define MDMA_D0_START_ADDR 0xFFC00F04 /* MemDMA Stream 0 Destination Start Address Register */ -#define MDMA_D0_CONFIG 0xFFC00F08 /* MemDMA Stream 0 Destination Configuration Register */ -#define MDMA_D0_X_COUNT 0xFFC00F10 /* MemDMA Stream 0 Destination X Count Register */ -#define MDMA_D0_X_MODIFY 0xFFC00F14 /* MemDMA Stream 0 Destination X Modify Register */ -#define MDMA_D0_Y_COUNT 0xFFC00F18 /* MemDMA Stream 0 Destination Y Count Register */ -#define MDMA_D0_Y_MODIFY 0xFFC00F1C /* MemDMA Stream 0 Destination Y Modify Register */ -#define MDMA_D0_CURR_DESC_PTR 0xFFC00F20 /* MemDMA Stream 0 Destination Current Descriptor Pointer Register */ -#define MDMA_D0_CURR_ADDR 0xFFC00F24 /* MemDMA Stream 0 Destination Current Address Register */ -#define MDMA_D0_IRQ_STATUS 0xFFC00F28 /* MemDMA Stream 0 Destination Interrupt/Status Register */ -#define MDMA_D0_PERIPHERAL_MAP 0xFFC00F2C /* MemDMA Stream 0 Destination Peripheral Map Register */ -#define MDMA_D0_CURR_X_COUNT 0xFFC00F30 /* MemDMA Stream 0 Destination Current X Count Register */ -#define MDMA_D0_CURR_Y_COUNT 0xFFC00F38 /* MemDMA Stream 0 Destination Current Y Count Register */ -#define MDMA_S1_NEXT_DESC_PTR 0xFFC00FC0 /* MemDMA Stream 1 Source Next Descriptor Pointer Register */ -#define MDMA_S1_START_ADDR 0xFFC00FC4 /* MemDMA Stream 1 Source Start Address Register */ -#define MDMA_S1_CONFIG 0xFFC00FC8 /* MemDMA Stream 1 Source Configuration Register */ -#define MDMA_S1_X_COUNT 0xFFC00FD0 /* MemDMA Stream 1 Source X Count Register */ -#define MDMA_S1_X_MODIFY 0xFFC00FD4 /* MemDMA Stream 1 Source X Modify Register */ -#define MDMA_S1_Y_COUNT 0xFFC00FD8 /* MemDMA Stream 1 Source Y Count Register */ -#define MDMA_S1_Y_MODIFY 0xFFC00FDC /* MemDMA Stream 1 Source Y Modify Register */ -#define MDMA_S1_CURR_DESC_PTR 0xFFC00FE0 /* MemDMA Stream 1 Source Current Descriptor Pointer Register */ -#define MDMA_S1_CURR_ADDR 0xFFC00FE4 /* MemDMA Stream 1 Source Current Address Register */ -#define MDMA_S1_IRQ_STATUS 0xFFC00FE8 /* MemDMA Stream 1 Source Interrupt/Status Register */ -#define MDMA_S1_PERIPHERAL_MAP 0xFFC00FEC /* MemDMA Stream 1 Source Peripheral Map Register */ -#define MDMA_S1_CURR_X_COUNT 0xFFC00FF0 /* MemDMA Stream 1 Source Current X Count Register */ -#define MDMA_S1_CURR_Y_COUNT 0xFFC00FF8 /* MemDMA Stream 1 Source Current Y Count Register */ -#define MDMA_D1_NEXT_DESC_PTR 0xFFC00F80 /* MemDMA Stream 1 Destination Next Descriptor Pointer Register */ -#define MDMA_D1_START_ADDR 0xFFC00F84 /* MemDMA Stream 1 Destination Start Address Register */ -#define MDMA_D1_CONFIG 0xFFC00F88 /* MemDMA Stream 1 Destination Configuration Register */ -#define MDMA_D1_X_COUNT 0xFFC00F90 /* MemDMA Stream 1 Destination X Count Register */ -#define MDMA_D1_X_MODIFY 0xFFC00F94 /* MemDMA Stream 1 Destination X Modify Register */ -#define MDMA_D1_Y_COUNT 0xFFC00F98 /* MemDMA Stream 1 Destination Y Count Register */ -#define MDMA_D1_Y_MODIFY 0xFFC00F9C /* MemDMA Stream 1 Destination Y Modify Register */ -#define MDMA_D1_CURR_DESC_PTR 0xFFC00FA0 /* MemDMA Stream 1 Destination Current Descriptor Pointer Register */ -#define MDMA_D1_CURR_ADDR 0xFFC00FA4 /* MemDMA Stream 1 Destination Current Address Register */ -#define MDMA_D1_IRQ_STATUS 0xFFC00FA8 /* MemDMA Stream 1 Destination Interrupt/Status Register */ -#define MDMA_D1_PERIPHERAL_MAP 0xFFC00FAC /* MemDMA Stream 1 Destination Peripheral Map Register */ -#define MDMA_D1_CURR_X_COUNT 0xFFC00FB0 /* MemDMA Stream 1 Destination Current X Count Register */ -#define MDMA_D1_CURR_Y_COUNT 0xFFC00FB8 /* MemDMA Stream 1 Destination Current Y Count Register */ -#define PPI_CONTROL 0xFFC01000 /* PPI Control Register */ -#define PPI_STATUS 0xFFC01004 /* PPI Status Register */ -#define PPI_COUNT 0xFFC01008 /* PPI Transfer Count Register */ -#define PPI_DELAY 0xFFC0100C /* PPI Delay Count Register */ -#define PPI_FRAME 0xFFC01010 /* PPI Frame Length Register */ -#define TWI_CLKDIV 0xFFC01400 /* Serial Clock Divider Register */ -#define TWI_CONTROL 0xFFC01404 /* TWI Control Register */ -#define TWI_SLAVE_CTL 0xFFC01408 /* Slave Mode Control Register */ -#define TWI_SLAVE_STAT 0xFFC0140C /* Slave Mode Status Register */ -#define TWI_SLAVE_ADDR 0xFFC01410 /* Slave Mode Address Register */ -#define TWI_MASTER_CTL 0xFFC01414 /* Master Mode Control Register */ -#define TWI_MASTER_STAT 0xFFC01418 /* Master Mode Status Register */ -#define TWI_MASTER_ADDR 0xFFC0141C /* Master Mode Address Register */ -#define TWI_INT_STAT 0xFFC01420 /* TWI Interrupt Status Register */ -#define TWI_INT_MASK 0xFFC01424 /* TWI Master Interrupt Mask Register */ -#define TWI_FIFO_CTL 0xFFC01428 /* FIFO Control Register */ -#define TWI_FIFO_STAT 0xFFC0142C /* FIFO Status Register */ -#define TWI_XMT_DATA8 0xFFC01480 /* FIFO Transmit Data Single Byte Register */ -#define TWI_XMT_DATA16 0xFFC01484 /* FIFO Transmit Data Double Byte Register */ -#define TWI_RCV_DATA8 0xFFC01488 /* FIFO Receive Data Single Byte Register */ -#define TWI_RCV_DATA16 0xFFC0148C /* FIFO Receive Data Double Byte Register */ -#define PORTGIO 0xFFC01500 /* Port G I/O Pin State Specify Register */ -#define PORTGIO_CLEAR 0xFFC01504 /* Port G I/O Peripheral Interrupt Clear Register */ -#define PORTGIO_SET 0xFFC01508 /* Port G I/O Peripheral Interrupt Set Register */ -#define PORTGIO_TOGGLE 0xFFC0150C /* Port G I/O Pin State Toggle Register */ -#define PORTGIO_MASKA 0xFFC01510 /* Port G I/O Mask State Specify Interrupt A Register */ -#define PORTGIO_MASKA_CLEAR 0xFFC01514 /* Port G I/O Mask Disable Interrupt A Register */ -#define PORTGIO_MASKA_SET 0xFFC01518 /* Port G I/O Mask Enable Interrupt A Register */ -#define PORTGIO_MASKA_TOGGLE 0xFFC0151C /* Port G I/O Mask Toggle Enable Interrupt A Register */ -#define PORTGIO_MASKB 0xFFC01520 /* Port G I/O Mask State Specify Interrupt B Register */ -#define PORTGIO_MASKB_CLEAR 0xFFC01524 /* Port G I/O Mask Disable Interrupt B Register */ -#define PORTGIO_MASKB_SET 0xFFC01528 /* Port G I/O Mask Enable Interrupt B Register */ -#define PORTGIO_MASKB_TOGGLE 0xFFC0152C /* Port G I/O Mask Toggle Enable Interrupt B Register */ -#define PORTGIO_DIR 0xFFC01530 /* Port G I/O Direction Register */ -#define PORTGIO_POLAR 0xFFC01534 /* Port G I/O Source Polarity Register */ -#define PORTGIO_EDGE 0xFFC01538 /* Port G I/O Source Sensitivity Register */ -#define PORTGIO_BOTH 0xFFC0153C /* Port G I/O Set on BOTH Edges Register */ -#define PORTGIO_INEN 0xFFC01540 /* Port G I/O Input Enable Register */ -#define PORTHIO 0xFFC01700 /* Port H I/O Pin State Specify Register */ -#define PORTHIO_CLEAR 0xFFC01704 /* Port H I/O Peripheral Interrupt Clear Register */ -#define PORTHIO_SET 0xFFC01708 /* Port H I/O Peripheral Interrupt Set Register */ -#define PORTHIO_TOGGLE 0xFFC0170C /* Port H I/O Pin State Toggle Register */ -#define PORTHIO_MASKA 0xFFC01710 /* Port H I/O Mask State Specify Interrupt A Register */ -#define PORTHIO_MASKA_CLEAR 0xFFC01714 /* Port H I/O Mask Disable Interrupt A Register */ -#define PORTHIO_MASKA_SET 0xFFC01718 /* Port H I/O Mask Enable Interrupt A Register */ -#define PORTHIO_MASKA_TOGGLE 0xFFC0171C /* Port H I/O Mask Toggle Enable Interrupt A Register */ -#define PORTHIO_MASKB 0xFFC01720 /* Port H I/O Mask State Specify Interrupt B Register */ -#define PORTHIO_MASKB_CLEAR 0xFFC01724 /* Port H I/O Mask Disable Interrupt B Register */ -#define PORTHIO_MASKB_SET 0xFFC01728 /* Port H I/O Mask Enable Interrupt B Register */ -#define PORTHIO_MASKB_TOGGLE 0xFFC0172C /* Port H I/O Mask Toggle Enable Interrupt B Register */ -#define PORTHIO_DIR 0xFFC01730 /* Port H I/O Direction Register */ -#define PORTHIO_POLAR 0xFFC01734 /* Port H I/O Source Polarity Register */ -#define PORTHIO_EDGE 0xFFC01738 /* Port H I/O Source Sensitivity Register */ -#define PORTHIO_BOTH 0xFFC0173C /* Port H I/O Set on BOTH Edges Register */ -#define PORTHIO_INEN 0xFFC01740 /* Port H I/O Input Enable Register */ -#define UART1_THR 0xFFC02000 /* Transmit Holding register */ -#define UART1_RBR 0xFFC02000 /* Receive Buffer register */ -#define UART1_DLL 0xFFC02000 /* Divisor Latch (Low-Byte) */ -#define UART1_IER 0xFFC02004 /* Interrupt Enable Register */ -#define UART1_DLH 0xFFC02004 /* Divisor Latch (High-Byte) */ -#define UART1_IIR 0xFFC02008 /* Interrupt Identification Register */ -#define UART1_LCR 0xFFC0200C /* Line Control Register */ -#define UART1_MCR 0xFFC02010 /* Modem Control Register */ -#define UART1_LSR 0xFFC02014 /* Line Status Register */ -#define UART1_MSR 0xFFC02018 /* Modem Status Register */ -#define UART1_SCR 0xFFC0201C /* SCR Scratch Register */ -#define UART1_GCTL 0xFFC02024 /* Global Control Register */ -#define PORTF_FER 0xFFC03200 /* Port F Function Enable Register (Alternate/Flag*) */ -#define PORTG_FER 0xFFC03204 /* Port G Function Enable Register (Alternate/Flag*) */ -#define PORTH_FER 0xFFC03208 /* Port H Function Enable Register (Alternate/Flag*) */ -#define HMDMA0_CONTROL 0xFFC03300 /* Handshake MDMA0 Control Register */ -#define HMDMA0_ECINIT 0xFFC03304 /* HMDMA0 Initial Edge Count Register */ -#define HMDMA0_BCINIT 0xFFC03308 /* HMDMA0 Initial Block Count Register */ -#define HMDMA0_ECURGENT 0xFFC0330C /* HMDMA0 Urgent Edge Count Threshhold Register */ -#define HMDMA0_ECOVERFLOW 0xFFC03310 /* HMDMA0 Edge Count Overflow Interrupt Register */ -#define HMDMA0_ECOUNT 0xFFC03314 /* HMDMA0 Current Edge Count Register */ -#define HMDMA0_BCOUNT 0xFFC03318 /* HMDMA0 Current Block Count Register */ -#define HMDMA1_CONTROL 0xFFC03340 /* Handshake MDMA1 Control Register */ -#define HMDMA1_ECINIT 0xFFC03344 /* HMDMA1 Initial Edge Count Register */ -#define HMDMA1_BCINIT 0xFFC03348 /* HMDMA1 Initial Block Count Register */ -#define HMDMA1_ECURGENT 0xFFC0334C /* HMDMA1 Urgent Edge Count Threshhold Register */ -#define HMDMA1_ECOVERFLOW 0xFFC03350 /* HMDMA1 Edge Count Overflow Interrupt Register */ -#define HMDMA1_ECOUNT 0xFFC03354 /* HMDMA1 Current Edge Count Register */ -#define HMDMA1_BCOUNT 0xFFC03358 /* HMDMA1 Current Block Count Register */ -#define PORTF_MUX 0xFFC03210 /* Port F mux control */ -#define PORTG_MUX 0xFFC03214 /* Port G mux control */ -#define PORTH_MUX 0xFFC03218 /* Port H mux control */ -#define PORTF_DRIVE 0xFFC03220 /* Port F drive strength control */ -#define PORTG_DRIVE 0xFFC03224 /* Port G drive strength control */ -#define PORTH_DRIVE 0xFFC03228 /* Port H drive strength control */ -#define PORTF_SLEW 0xFFC03230 /* Port F slew control */ -#define PORTG_SLEW 0xFFC03234 /* Port G slew control */ -#define PORTH_SLEW 0xFFC03238 /* Port H slew control */ -#define PORTF_HYSTERESIS 0xFFC03240 /* Port F Schmitt trigger control */ -#define PORTG_HYSTERESIS 0xFFC03244 /* Port G Schmitt trigger control */ -#define PORTH_HYSTERESIS 0xFFC03248 /* Port H Schmitt trigger control */ -#define NONGPIO_DRIVE 0xFFC03280 /* Non-GPIO Port drive strength control */ -#define NONGPIO_SLEW 0xFFC03284 /* Non-GPIO Port slew control */ -#define NONGPIO_HYSTERESIS 0xFFC03288 /* Non-GPIO Port Schmitt trigger control */ -#define HOST_CONTROL 0xFFC03400 /* HOST Control Register */ -#define HOST_STATUS 0xFFC03404 /* HOST Status Register */ -#define HOST_TIMEOUT 0xFFC03408 /* HOST Acknowledge Mode Timeout Register */ -#define CNT_CONFIG 0xFFC03500 /* Configuration/Control Register */ -#define CNT_IMASK 0xFFC03504 /* Interrupt Mask Register */ -#define CNT_STATUS 0xFFC03508 /* Status Register */ -#define CNT_COMMAND 0xFFC0350C /* Command Register */ -#define CNT_DEBOUNCE 0xFFC03510 /* Debounce Prescaler Register */ -#define CNT_COUNTER 0xFFC03514 /* Counter Register */ -#define CNT_MAX 0xFFC03518 /* Maximal Count Boundary Value Register */ -#define CNT_MIN 0xFFC0351C /* Minimal Count Boundary Value Register */ -#define OTP_CONTROL 0xFFC03600 /* OTP/Fuse Control Register */ -#define OTP_BEN 0xFFC03604 /* OTP/Fuse Byte Enable */ -#define OTP_STATUS 0xFFC03608 /* OTP/Fuse Status */ -#define OTP_TIMING 0xFFC0360C /* OTP/Fuse Access Timing */ -#define SECURE_SYSSWT 0xFFC03620 /* Secure System Switches */ -#define SECURE_CONTROL 0xFFC03624 /* Secure Control */ -#define SECURE_STATUS 0xFFC03628 /* Secure Status */ -#define OTP_DATA0 0xFFC03680 /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */ -#define OTP_DATA1 0xFFC03684 /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */ -#define OTP_DATA2 0xFFC03688 /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */ -#define OTP_DATA3 0xFFC0368C /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */ -#define NFC_CTL 0xFFC03700 /* NAND Control Register */ -#define NFC_STAT 0xFFC03704 /* NAND Status Register */ -#define NFC_IRQSTAT 0xFFC03708 /* NAND Interrupt Status Register */ -#define NFC_IRQMASK 0xFFC0370C /* NAND Interrupt Mask Register */ -#define NFC_ECC0 0xFFC03710 /* NAND ECC Register 0 */ -#define NFC_ECC1 0xFFC03714 /* NAND ECC Register 1 */ -#define NFC_ECC2 0xFFC03718 /* NAND ECC Register 2 */ -#define NFC_ECC3 0xFFC0371C /* NAND ECC Register 3 */ -#define NFC_COUNT 0xFFC03720 /* NAND ECC Count Register */ -#define NFC_RST 0xFFC03724 /* NAND ECC Reset Register */ -#define NFC_PGCTL 0xFFC03728 /* NAND Page Control Register */ -#define NFC_READ 0xFFC0372C /* NAND Read Data Register */ -#define NFC_ADDR 0xFFC03740 /* NAND Address Register */ -#define NFC_CMD 0xFFC03744 /* NAND Command Register */ -#define NFC_DATA_WR 0xFFC03748 /* NAND Data Write Register */ -#define NFC_DATA_RD 0xFFC0374C /* NAND Data Read Register */ -#define DMA_TC_CNT 0xFFC00B0C -#define DMA_TC_PER 0xFFC00B10 - -#endif /* __BFIN_DEF_ADSP_EDN_BF52x_extended__ */ diff --git a/arch/blackfin/include/asm/mach-bf527/BF522_cdef.h b/arch/blackfin/include/asm/mach-bf527/BF522_cdef.h index 9ce41b1..49a60af 100644 --- a/arch/blackfin/include/asm/mach-bf527/BF522_cdef.h +++ b/arch/blackfin/include/asm/mach-bf527/BF522_cdef.h @@ -8,8 +8,6 @@ #include "../mach-common/ADSP-EDN-core_cdef.h" -#include "ADSP-EDN-BF52x-extended_cdef.h" - #define bfin_read_PLL_CTL() bfin_read16(PLL_CTL) #define bfin_write_PLL_CTL(val) bfin_write16(PLL_CTL, val) #define bfin_read_PLL_DIV() bfin_read16(PLL_DIV) @@ -26,5 +24,989 @@ #define bfin_write_SWRST(val) bfin_write16(SWRST, val) #define bfin_read_SYSCR() bfin_read16(SYSCR) #define bfin_write_SYSCR(val) bfin_write16(SYSCR, val) +#define bfin_read_SIC_RVECT() bfin_read16(SIC_RVECT) +#define bfin_write_SIC_RVECT(val) bfin_write16(SIC_RVECT, val) +#define bfin_read_SIC_IMASK0() bfin_read32(SIC_IMASK0) +#define bfin_write_SIC_IMASK0(val) bfin_write32(SIC_IMASK0, val) +#define bfin_read_SIC_IAR0() bfin_read32(SIC_IAR0) +#define bfin_write_SIC_IAR0(val) bfin_write32(SIC_IAR0, val) +#define bfin_read_SIC_IAR1() bfin_read32(SIC_IAR1) +#define bfin_write_SIC_IAR1(val) bfin_write32(SIC_IAR1, val) +#define bfin_read_SIC_IAR2() bfin_read32(SIC_IAR2) +#define bfin_write_SIC_IAR2(val) bfin_write32(SIC_IAR2, val) +#define bfin_read_SIC_IAR3() bfin_read32(SIC_IAR3) +#define bfin_write_SIC_IAR3(val) bfin_write32(SIC_IAR3, val) +#define bfin_read_SIC_ISR0() bfin_read32(SIC_ISR0) +#define bfin_write_SIC_ISR0(val) bfin_write32(SIC_ISR0, val) +#define bfin_read_SIC_IWR0() bfin_read32(SIC_IWR0) +#define bfin_write_SIC_IWR0(val) bfin_write32(SIC_IWR0, val) +#define bfin_read_SIC_IMASK1() bfin_read32(SIC_IMASK1) +#define bfin_write_SIC_IMASK1(val) bfin_write32(SIC_IMASK1, val) +#define bfin_read_SIC_IAR4() bfin_read32(SIC_IAR4) +#define bfin_write_SIC_IAR4(val) bfin_write32(SIC_IAR4, val) +#define bfin_read_SIC_IAR5() bfin_read32(SIC_IAR5) +#define bfin_write_SIC_IAR5(val) bfin_write32(SIC_IAR5, val) +#define bfin_read_SIC_IAR6() bfin_read32(SIC_IAR6) +#define bfin_write_SIC_IAR6(val) bfin_write32(SIC_IAR6, val) +#define bfin_read_SIC_IAR7() bfin_read32(SIC_IAR7) +#define bfin_write_SIC_IAR7(val) bfin_write32(SIC_IAR7, val) +#define bfin_read_SIC_ISR1() bfin_read32(SIC_ISR1) +#define bfin_write_SIC_ISR1(val) bfin_write32(SIC_ISR1, val) +#define bfin_read_SIC_IWR1() bfin_read32(SIC_IWR1) +#define bfin_write_SIC_IWR1(val) bfin_write32(SIC_IWR1, val) +#define bfin_read_WDOG_CTL() bfin_read16(WDOG_CTL) +#define bfin_write_WDOG_CTL(val) bfin_write16(WDOG_CTL, val) +#define bfin_read_WDOG_CNT() bfin_read32(WDOG_CNT) +#define bfin_write_WDOG_CNT(val) bfin_write32(WDOG_CNT, val) +#define bfin_read_WDOG_STAT() bfin_read32(WDOG_STAT) +#define bfin_write_WDOG_STAT(val) bfin_write32(WDOG_STAT, val) +#define bfin_read_RTC_STAT() bfin_read32(RTC_STAT) +#define bfin_write_RTC_STAT(val) bfin_write32(RTC_STAT, val) +#define bfin_read_RTC_ICTL() bfin_read16(RTC_ICTL) +#define bfin_write_RTC_ICTL(val) bfin_write16(RTC_ICTL, val) +#define bfin_read_RTC_ISTAT() bfin_read16(RTC_ISTAT) +#define bfin_write_RTC_ISTAT(val) bfin_write16(RTC_ISTAT, val) +#define bfin_read_RTC_SWCNT() bfin_read16(RTC_SWCNT) +#define bfin_write_RTC_SWCNT(val) bfin_write16(RTC_SWCNT, val) +#define bfin_read_RTC_ALARM() bfin_read32(RTC_ALARM) +#define bfin_write_RTC_ALARM(val) bfin_write32(RTC_ALARM, val) +#define bfin_read_RTC_PREN() bfin_read16(RTC_PREN) +#define bfin_write_RTC_PREN(val) bfin_write16(RTC_PREN, val) +#define bfin_read_UART0_THR() bfin_read16(UART0_THR) +#define bfin_write_UART0_THR(val) bfin_write16(UART0_THR, val) +#define bfin_read_UART0_RBR() bfin_read16(UART0_RBR) +#define bfin_write_UART0_RBR(val) bfin_write16(UART0_RBR, val) +#define bfin_read_UART0_DLL() bfin_read16(UART0_DLL) +#define bfin_write_UART0_DLL(val) bfin_write16(UART0_DLL, val) +#define bfin_read_UART0_IER() bfin_read16(UART0_IER) +#define bfin_write_UART0_IER(val) bfin_write16(UART0_IER, val) +#define bfin_read_UART0_DLH() bfin_read16(UART0_DLH) +#define bfin_write_UART0_DLH(val) bfin_write16(UART0_DLH, val) +#define bfin_read_UART0_IIR() bfin_read16(UART0_IIR) +#define bfin_write_UART0_IIR(val) bfin_write16(UART0_IIR, val) +#define bfin_read_UART0_LCR() bfin_read16(UART0_LCR) +#define bfin_write_UART0_LCR(val) bfin_write16(UART0_LCR, val) +#define bfin_read_UART0_MCR() bfin_read16(UART0_MCR) +#define bfin_write_UART0_MCR(val) bfin_write16(UART0_MCR, val) +#define bfin_read_UART0_LSR() bfin_read16(UART0_LSR) +#define bfin_write_UART0_LSR(val) bfin_write16(UART0_LSR, val) +#define bfin_read_UART0_MSR() bfin_read16(UART0_MSR) +#define bfin_write_UART0_MSR(val) bfin_write16(UART0_MSR, val) +#define bfin_read_UART0_SCR() bfin_read16(UART0_SCR) +#define bfin_write_UART0_SCR(val) bfin_write16(UART0_SCR, val) +#define bfin_read_UART0_GCTL() bfin_read16(UART0_GCTL) +#define bfin_write_UART0_GCTL(val) bfin_write16(UART0_GCTL, val) +#define bfin_read_SPI_CTL() bfin_read16(SPI_CTL) +#define bfin_write_SPI_CTL(val) bfin_write16(SPI_CTL, val) +#define bfin_read_SPI_FLG() bfin_read16(SPI_FLG) +#define bfin_write_SPI_FLG(val) bfin_write16(SPI_FLG, val) +#define bfin_read_SPI_STAT() bfin_read16(SPI_STAT) +#define bfin_write_SPI_STAT(val) bfin_write16(SPI_STAT, val) +#define bfin_read_SPI_TDBR() bfin_read16(SPI_TDBR) +#define bfin_write_SPI_TDBR(val) bfin_write16(SPI_TDBR, val) +#define bfin_read_SPI_RDBR() bfin_read16(SPI_RDBR) +#define bfin_write_SPI_RDBR(val) bfin_write16(SPI_RDBR, val) +#define bfin_read_SPI_BAUD() bfin_read16(SPI_BAUD) +#define bfin_write_SPI_BAUD(val) bfin_write16(SPI_BAUD, val) +#define bfin_read_SPI_SHADOW() bfin_read16(SPI_SHADOW) +#define bfin_write_SPI_SHADOW(val) bfin_write16(SPI_SHADOW, val) +#define bfin_read_TIMER0_CONFIG() bfin_read16(TIMER0_CONFIG) +#define bfin_write_TIMER0_CONFIG(val) bfin_write16(TIMER0_CONFIG, val) +#define bfin_read_TIMER0_COUNTER() bfin_read32(TIMER0_COUNTER) +#define bfin_write_TIMER0_COUNTER(val) bfin_write32(TIMER0_COUNTER, val) +#define bfin_read_TIMER0_PERIOD() bfin_read32(TIMER0_PERIOD) +#define bfin_write_TIMER0_PERIOD(val) bfin_write32(TIMER0_PERIOD, val) +#define bfin_read_TIMER0_WIDTH() bfin_read32(TIMER0_WIDTH) +#define bfin_write_TIMER0_WIDTH(val) bfin_write32(TIMER0_WIDTH, val) +#define bfin_read_TIMER1_CONFIG() bfin_read16(TIMER1_CONFIG) +#define bfin_write_TIMER1_CONFIG(val) bfin_write16(TIMER1_CONFIG, val) +#define bfin_read_TIMER1_COUNTER() bfin_read32(TIMER1_COUNTER) +#define bfin_write_TIMER1_COUNTER(val) bfin_write32(TIMER1_COUNTER, val) +#define bfin_read_TIMER1_PERIOD() bfin_read32(TIMER1_PERIOD) +#define bfin_write_TIMER1_PERIOD(val) bfin_write32(TIMER1_PERIOD, val) +#define bfin_read_TIMER1_WIDTH() bfin_read32(TIMER1_WIDTH) +#define bfin_write_TIMER1_WIDTH(val) bfin_write32(TIMER1_WIDTH, val) +#define bfin_read_TIMER2_CONFIG() bfin_read16(TIMER2_CONFIG) +#define bfin_write_TIMER2_CONFIG(val) bfin_write16(TIMER2_CONFIG, val) +#define bfin_read_TIMER2_COUNTER() bfin_read32(TIMER2_COUNTER) +#define bfin_write_TIMER2_COUNTER(val) bfin_write32(TIMER2_COUNTER, val) +#define bfin_read_TIMER2_PERIOD() bfin_read32(TIMER2_PERIOD) +#define bfin_write_TIMER2_PERIOD(val) bfin_write32(TIMER2_PERIOD, val) +#define bfin_read_TIMER2_WIDTH() bfin_read32(TIMER2_WIDTH) +#define bfin_write_TIMER2_WIDTH(val) bfin_write32(TIMER2_WIDTH, val) +#define bfin_read_TIMER3_CONFIG() bfin_read16(TIMER3_CONFIG) +#define bfin_write_TIMER3_CONFIG(val) bfin_write16(TIMER3_CONFIG, val) +#define bfin_read_TIMER3_COUNTER() bfin_read32(TIMER3_COUNTER) +#define bfin_write_TIMER3_COUNTER(val) bfin_write32(TIMER3_COUNTER, val) +#define bfin_read_TIMER3_PERIOD() bfin_read32(TIMER3_PERIOD) +#define bfin_write_TIMER3_PERIOD(val) bfin_write32(TIMER3_PERIOD, val) +#define bfin_read_TIMER3_WIDTH() bfin_read32(TIMER3_WIDTH) +#define bfin_write_TIMER3_WIDTH(val) bfin_write32(TIMER3_WIDTH, val) +#define bfin_read_TIMER4_CONFIG() bfin_read16(TIMER4_CONFIG) +#define bfin_write_TIMER4_CONFIG(val) bfin_write16(TIMER4_CONFIG, val) +#define bfin_read_TIMER4_COUNTER() bfin_read32(TIMER4_COUNTER) +#define bfin_write_TIMER4_COUNTER(val) bfin_write32(TIMER4_COUNTER, val) +#define bfin_read_TIMER4_PERIOD() bfin_read32(TIMER4_PERIOD) +#define bfin_write_TIMER4_PERIOD(val) bfin_write32(TIMER4_PERIOD, val) +#define bfin_read_TIMER4_WIDTH() bfin_read32(TIMER4_WIDTH) +#define bfin_write_TIMER4_WIDTH(val) bfin_write32(TIMER4_WIDTH, val) +#define bfin_read_TIMER5_CONFIG() bfin_read16(TIMER5_CONFIG) +#define bfin_write_TIMER5_CONFIG(val) bfin_write16(TIMER5_CONFIG, val) +#define bfin_read_TIMER5_COUNTER() bfin_read32(TIMER5_COUNTER) +#define bfin_write_TIMER5_COUNTER(val) bfin_write32(TIMER5_COUNTER, val) +#define bfin_read_TIMER5_PERIOD() bfin_read32(TIMER5_PERIOD) +#define bfin_write_TIMER5_PERIOD(val) bfin_write32(TIMER5_PERIOD, val) +#define bfin_read_TIMER5_WIDTH() bfin_read32(TIMER5_WIDTH) +#define bfin_write_TIMER5_WIDTH(val) bfin_write32(TIMER5_WIDTH, val) +#define bfin_read_TIMER6_CONFIG() bfin_read16(TIMER6_CONFIG) +#define bfin_write_TIMER6_CONFIG(val) bfin_write16(TIMER6_CONFIG, val) +#define bfin_read_TIMER6_COUNTER() bfin_read32(TIMER6_COUNTER) +#define bfin_write_TIMER6_COUNTER(val) bfin_write32(TIMER6_COUNTER, val) +#define bfin_read_TIMER6_PERIOD() bfin_read32(TIMER6_PERIOD) +#define bfin_write_TIMER6_PERIOD(val) bfin_write32(TIMER6_PERIOD, val) +#define bfin_read_TIMER6_WIDTH() bfin_read32(TIMER6_WIDTH) +#define bfin_write_TIMER6_WIDTH(val) bfin_write32(TIMER6_WIDTH, val) +#define bfin_read_TIMER7_CONFIG() bfin_read16(TIMER7_CONFIG) +#define bfin_write_TIMER7_CONFIG(val) bfin_write16(TIMER7_CONFIG, val) +#define bfin_read_TIMER7_COUNTER() bfin_read32(TIMER7_COUNTER) +#define bfin_write_TIMER7_COUNTER(val) bfin_write32(TIMER7_COUNTER, val) +#define bfin_read_TIMER7_PERIOD() bfin_read32(TIMER7_PERIOD) +#define bfin_write_TIMER7_PERIOD(val) bfin_write32(TIMER7_PERIOD, val) +#define bfin_read_TIMER7_WIDTH() bfin_read32(TIMER7_WIDTH) +#define bfin_write_TIMER7_WIDTH(val) bfin_write32(TIMER7_WIDTH, val) +#define bfin_read_TIMER_ENABLE() bfin_read16(TIMER_ENABLE) +#define bfin_write_TIMER_ENABLE(val) bfin_write16(TIMER_ENABLE, val) +#define bfin_read_TIMER_DISABLE() bfin_read16(TIMER_DISABLE) +#define bfin_write_TIMER_DISABLE(val) bfin_write16(TIMER_DISABLE, val) +#define bfin_read_TIMER_STATUS() bfin_read32(TIMER_STATUS) +#define bfin_write_TIMER_STATUS(val) bfin_write32(TIMER_STATUS, val) +#define bfin_read_PORTFIO() bfin_read16(PORTFIO) +#define bfin_write_PORTFIO(val) bfin_write16(PORTFIO, val) +#define bfin_read_PORTFIO_CLEAR() bfin_read16(PORTFIO_CLEAR) +#define bfin_write_PORTFIO_CLEAR(val) bfin_write16(PORTFIO_CLEAR, val) +#define bfin_read_PORTFIO_SET() bfin_read16(PORTFIO_SET) +#define bfin_write_PORTFIO_SET(val) bfin_write16(PORTFIO_SET, val) +#define bfin_read_PORTFIO_TOGGLE() bfin_read16(PORTFIO_TOGGLE) +#define bfin_write_PORTFIO_TOGGLE(val) bfin_write16(PORTFIO_TOGGLE, val) +#define bfin_read_PORTFIO_MASKA() bfin_read16(PORTFIO_MASKA) +#define bfin_write_PORTFIO_MASKA(val) bfin_write16(PORTFIO_MASKA, val) +#define bfin_read_PORTFIO_MASKA_CLEAR() bfin_read16(PORTFIO_MASKA_CLEAR) +#define bfin_write_PORTFIO_MASKA_CLEAR(val) bfin_write16(PORTFIO_MASKA_CLEAR, val) +#define bfin_read_PORTFIO_MASKA_SET() bfin_read16(PORTFIO_MASKA_SET) +#define bfin_write_PORTFIO_MASKA_SET(val) bfin_write16(PORTFIO_MASKA_SET, val) +#define bfin_read_PORTFIO_MASKA_TOGGLE() bfin_read16(PORTFIO_MASKA_TOGGLE) +#define bfin_write_PORTFIO_MASKA_TOGGLE(val) bfin_write16(PORTFIO_MASKA_TOGGLE, val) +#define bfin_read_PORTFIO_MASKB() bfin_read16(PORTFIO_MASKB) +#define bfin_write_PORTFIO_MASKB(val) bfin_write16(PORTFIO_MASKB, val) +#define bfin_read_PORTFIO_MASKB_CLEAR() bfin_read16(PORTFIO_MASKB_CLEAR) +#define bfin_write_PORTFIO_MASKB_CLEAR(val) bfin_write16(PORTFIO_MASKB_CLEAR, val) +#define bfin_read_PORTFIO_MASKB_SET() bfin_read16(PORTFIO_MASKB_SET) +#define bfin_write_PORTFIO_MASKB_SET(val) bfin_write16(PORTFIO_MASKB_SET, val) +#define bfin_read_PORTFIO_MASKB_TOGGLE() bfin_read16(PORTFIO_MASKB_TOGGLE) +#define bfin_write_PORTFIO_MASKB_TOGGLE(val) bfin_write16(PORTFIO_MASKB_TOGGLE, val) +#define bfin_read_PORTFIO_DIR() bfin_read16(PORTFIO_DIR) +#define bfin_write_PORTFIO_DIR(val) bfin_write16(PORTFIO_DIR, val) +#define bfin_read_PORTFIO_POLAR() bfin_read16(PORTFIO_POLAR) +#define bfin_write_PORTFIO_POLAR(val) bfin_write16(PORTFIO_POLAR, val) +#define bfin_read_PORTFIO_EDGE() bfin_read16(PORTFIO_EDGE) +#define bfin_write_PORTFIO_EDGE(val) bfin_write16(PORTFIO_EDGE, val) +#define bfin_read_PORTFIO_BOTH() bfin_read16(PORTFIO_BOTH) +#define bfin_write_PORTFIO_BOTH(val) bfin_write16(PORTFIO_BOTH, val) +#define bfin_read_PORTFIO_INEN() bfin_read16(PORTFIO_INEN) +#define bfin_write_PORTFIO_INEN(val) bfin_write16(PORTFIO_INEN, val) +#define bfin_read_SPORT0_TCR1() bfin_read16(SPORT0_TCR1) +#define bfin_write_SPORT0_TCR1(val) bfin_write16(SPORT0_TCR1, val) +#define bfin_read_SPORT0_TCR2() bfin_read16(SPORT0_TCR2) +#define bfin_write_SPORT0_TCR2(val) bfin_write16(SPORT0_TCR2, val) +#define bfin_read_SPORT0_TCLKDIV() bfin_read16(SPORT0_TCLKDIV) +#define bfin_write_SPORT0_TCLKDIV(val) bfin_write16(SPORT0_TCLKDIV, val) +#define bfin_read_SPORT0_TFSDIV() bfin_read16(SPORT0_TFSDIV) +#define bfin_write_SPORT0_TFSDIV(val) bfin_write16(SPORT0_TFSDIV, val) +#define bfin_write_SPORT0_TX(val) bfin_write32(SPORT0_TX, val) +#define bfin_read_SPORT0_RX() bfin_read32(SPORT0_RX) +#define bfin_write_SPORT0_RX(val) bfin_write32(SPORT0_RX, val) +#define bfin_read_SPORT0_RCR1() bfin_read16(SPORT0_RCR1) +#define bfin_write_SPORT0_RCR1(val) bfin_write16(SPORT0_RCR1, val) +#define bfin_read_SPORT0_RCR2() bfin_read16(SPORT0_RCR2) +#define bfin_write_SPORT0_RCR2(val) bfin_write16(SPORT0_RCR2, val) +#define bfin_read_SPORT0_RCLKDIV() bfin_read16(SPORT0_RCLKDIV) +#define bfin_write_SPORT0_RCLKDIV(val) bfin_write16(SPORT0_RCLKDIV, val) +#define bfin_read_SPORT0_RFSDIV() bfin_read16(SPORT0_RFSDIV) +#define bfin_write_SPORT0_RFSDIV(val) bfin_write16(SPORT0_RFSDIV, val) +#define bfin_read_SPORT0_STAT() bfin_read16(SPORT0_STAT) +#define bfin_write_SPORT0_STAT(val) bfin_write16(SPORT0_STAT, val) +#define bfin_read_SPORT0_CHNL() bfin_read16(SPORT0_CHNL) +#define bfin_write_SPORT0_CHNL(val) bfin_write16(SPORT0_CHNL, val) +#define bfin_read_SPORT0_MCMC1() bfin_read16(SPORT0_MCMC1) +#define bfin_write_SPORT0_MCMC1(val) bfin_write16(SPORT0_MCMC1, val) +#define bfin_read_SPORT0_MCMC2() bfin_read16(SPORT0_MCMC2) +#define bfin_write_SPORT0_MCMC2(val) bfin_write16(SPORT0_MCMC2, val) +#define bfin_read_SPORT0_MTCS0() bfin_read32(SPORT0_MTCS0) +#define bfin_write_SPORT0_MTCS0(val) bfin_write32(SPORT0_MTCS0, val) +#define bfin_read_SPORT0_MTCS1() bfin_read32(SPORT0_MTCS1) +#define bfin_write_SPORT0_MTCS1(val) bfin_write32(SPORT0_MTCS1, val) +#define bfin_read_SPORT0_MTCS2() bfin_read32(SPORT0_MTCS2) +#define bfin_write_SPORT0_MTCS2(val) bfin_write32(SPORT0_MTCS2, val) +#define bfin_read_SPORT0_MTCS3() bfin_read32(SPORT0_MTCS3) +#define bfin_write_SPORT0_MTCS3(val) bfin_write32(SPORT0_MTCS3, val) +#define bfin_read_SPORT0_MRCS0() bfin_read32(SPORT0_MRCS0) +#define bfin_write_SPORT0_MRCS0(val) bfin_write32(SPORT0_MRCS0, val) +#define bfin_read_SPORT0_MRCS1() bfin_read32(SPORT0_MRCS1) +#define bfin_write_SPORT0_MRCS1(val) bfin_write32(SPORT0_MRCS1, val) +#define bfin_read_SPORT0_MRCS2() bfin_read32(SPORT0_MRCS2) +#define bfin_write_SPORT0_MRCS2(val) bfin_write32(SPORT0_MRCS2, val) +#define bfin_read_SPORT0_MRCS3() bfin_read32(SPORT0_MRCS3) +#define bfin_write_SPORT0_MRCS3(val) bfin_write32(SPORT0_MRCS3, val) +#define bfin_read_SPORT1_TCR1() bfin_read16(SPORT1_TCR1) +#define bfin_write_SPORT1_TCR1(val) bfin_write16(SPORT1_TCR1, val) +#define bfin_read_SPORT1_TCR2() bfin_read16(SPORT1_TCR2) +#define bfin_write_SPORT1_TCR2(val) bfin_write16(SPORT1_TCR2, val) +#define bfin_read_SPORT1_TCLKDIV() bfin_read16(SPORT1_TCLKDIV) +#define bfin_write_SPORT1_TCLKDIV(val) bfin_write16(SPORT1_TCLKDIV, val) +#define bfin_read_SPORT1_TFSDIV() bfin_read16(SPORT1_TFSDIV) +#define bfin_write_SPORT1_TFSDIV(val) bfin_write16(SPORT1_TFSDIV, val) +#define bfin_write_SPORT1_TX(val) bfin_write32(SPORT1_TX, val) +#define bfin_read_SPORT1_RX() bfin_read32(SPORT1_RX) +#define bfin_write_SPORT1_RX(val) bfin_write32(SPORT1_RX, val) +#define bfin_read_SPORT1_RCR1() bfin_read16(SPORT1_RCR1) +#define bfin_write_SPORT1_RCR1(val) bfin_write16(SPORT1_RCR1, val) +#define bfin_read_SPORT1_RCR2() bfin_read16(SPORT1_RCR2) +#define bfin_write_SPORT1_RCR2(val) bfin_write16(SPORT1_RCR2, val) +#define bfin_read_SPORT1_RCLKDIV() bfin_read16(SPORT1_RCLKDIV) +#define bfin_write_SPORT1_RCLKDIV(val) bfin_write16(SPORT1_RCLKDIV, val) +#define bfin_read_SPORT1_RFSDIV() bfin_read16(SPORT1_RFSDIV) +#define bfin_write_SPORT1_RFSDIV(val) bfin_write16(SPORT1_RFSDIV, val) +#define bfin_read_SPORT1_STAT() bfin_read16(SPORT1_STAT) +#define bfin_write_SPORT1_STAT(val) bfin_write16(SPORT1_STAT, val) +#define bfin_read_SPORT1_CHNL() bfin_read16(SPORT1_CHNL) +#define bfin_write_SPORT1_CHNL(val) bfin_write16(SPORT1_CHNL, val) +#define bfin_read_SPORT1_MCMC1() bfin_read16(SPORT1_MCMC1) +#define bfin_write_SPORT1_MCMC1(val) bfin_write16(SPORT1_MCMC1, val) +#define bfin_read_SPORT1_MCMC2() bfin_read16(SPORT1_MCMC2) +#define bfin_write_SPORT1_MCMC2(val) bfin_write16(SPORT1_MCMC2, val) +#define bfin_read_SPORT1_MTCS0() bfin_read32(SPORT1_MTCS0) +#define bfin_write_SPORT1_MTCS0(val) bfin_write32(SPORT1_MTCS0, val) +#define bfin_read_SPORT1_MTCS1() bfin_read32(SPORT1_MTCS1) +#define bfin_write_SPORT1_MTCS1(val) bfin_write32(SPORT1_MTCS1, val) +#define bfin_read_SPORT1_MTCS2() bfin_read32(SPORT1_MTCS2) +#define bfin_write_SPORT1_MTCS2(val) bfin_write32(SPORT1_MTCS2, val) +#define bfin_read_SPORT1_MTCS3() bfin_read32(SPORT1_MTCS3) +#define bfin_write_SPORT1_MTCS3(val) bfin_write32(SPORT1_MTCS3, val) +#define bfin_read_SPORT1_MRCS0() bfin_read32(SPORT1_MRCS0) +#define bfin_write_SPORT1_MRCS0(val) bfin_write32(SPORT1_MRCS0, val) +#define bfin_read_SPORT1_MRCS1() bfin_read32(SPORT1_MRCS1) +#define bfin_write_SPORT1_MRCS1(val) bfin_write32(SPORT1_MRCS1, val) +#define bfin_read_SPORT1_MRCS2() bfin_read32(SPORT1_MRCS2) +#define bfin_write_SPORT1_MRCS2(val) bfin_write32(SPORT1_MRCS2, val) +#define bfin_read_SPORT1_MRCS3() bfin_read32(SPORT1_MRCS3) +#define bfin_write_SPORT1_MRCS3(val) bfin_write32(SPORT1_MRCS3, val) +#define bfin_read_EBIU_AMGCTL() bfin_read16(EBIU_AMGCTL) +#define bfin_write_EBIU_AMGCTL(val) bfin_write16(EBIU_AMGCTL, val) +#define bfin_read_EBIU_AMBCTL0() bfin_read32(EBIU_AMBCTL0) +#define bfin_write_EBIU_AMBCTL0(val) bfin_write32(EBIU_AMBCTL0, val) +#define bfin_read_EBIU_AMBCTL1() bfin_read32(EBIU_AMBCTL1) +#define bfin_write_EBIU_AMBCTL1(val) bfin_write32(EBIU_AMBCTL1, val) +#define bfin_read_EBIU_SDGCTL() bfin_read32(EBIU_SDGCTL) +#define bfin_write_EBIU_SDGCTL(val) bfin_write32(EBIU_SDGCTL, val) +#define bfin_read_EBIU_SDBCTL() bfin_read16(EBIU_SDBCTL) +#define bfin_write_EBIU_SDBCTL(val) bfin_write16(EBIU_SDBCTL, val) +#define bfin_read_EBIU_SDRRC() bfin_read16(EBIU_SDRRC) +#define bfin_write_EBIU_SDRRC(val) bfin_write16(EBIU_SDRRC, val) +#define bfin_read_EBIU_SDSTAT() bfin_read16(EBIU_SDSTAT) +#define bfin_write_EBIU_SDSTAT(val) bfin_write16(EBIU_SDSTAT, val) +#define bfin_read_DMA0_NEXT_DESC_PTR() bfin_readPTR(DMA0_NEXT_DESC_PTR) +#define bfin_write_DMA0_NEXT_DESC_PTR(val) bfin_writePTR(DMA0_NEXT_DESC_PTR, val) +#define bfin_read_DMA0_START_ADDR() bfin_readPTR(DMA0_START_ADDR) +#define bfin_write_DMA0_START_ADDR(val) bfin_writePTR(DMA0_START_ADDR, val) +#define bfin_read_DMA0_CONFIG() bfin_read16(DMA0_CONFIG) +#define bfin_write_DMA0_CONFIG(val) bfin_write16(DMA0_CONFIG, val) +#define bfin_read_DMA0_X_COUNT() bfin_read16(DMA0_X_COUNT) +#define bfin_write_DMA0_X_COUNT(val) bfin_write16(DMA0_X_COUNT, val) +#define bfin_read_DMA0_X_MODIFY() bfin_read16(DMA0_X_MODIFY) +#define bfin_write_DMA0_X_MODIFY(val) bfin_write16(DMA0_X_MODIFY, val) +#define bfin_read_DMA0_Y_COUNT() bfin_read16(DMA0_Y_COUNT) +#define bfin_write_DMA0_Y_COUNT(val) bfin_write16(DMA0_Y_COUNT, val) +#define bfin_read_DMA0_Y_MODIFY() bfin_read16(DMA0_Y_MODIFY) +#define bfin_write_DMA0_Y_MODIFY(val) bfin_write16(DMA0_Y_MODIFY, val) +#define bfin_read_DMA0_CURR_DESC_PTR() bfin_readPTR(DMA0_CURR_DESC_PTR) +#define bfin_write_DMA0_CURR_DESC_PTR(val) bfin_writePTR(DMA0_CURR_DESC_PTR, val) +#define bfin_read_DMA0_CURR_ADDR() bfin_readPTR(DMA0_CURR_ADDR) +#define bfin_write_DMA0_CURR_ADDR(val) bfin_writePTR(DMA0_CURR_ADDR, val) +#define bfin_read_DMA0_IRQ_STATUS() bfin_read16(DMA0_IRQ_STATUS) +#define bfin_write_DMA0_IRQ_STATUS(val) bfin_write16(DMA0_IRQ_STATUS, val) +#define bfin_read_DMA0_PERIPHERAL_MAP() bfin_read16(DMA0_PERIPHERAL_MAP) +#define bfin_write_DMA0_PERIPHERAL_MAP(val) bfin_write16(DMA0_PERIPHERAL_MAP, val) +#define bfin_read_DMA0_CURR_X_COUNT() bfin_read16(DMA0_CURR_X_COUNT) +#define bfin_write_DMA0_CURR_X_COUNT(val) bfin_write16(DMA0_CURR_X_COUNT, val) +#define bfin_read_DMA0_CURR_Y_COUNT() bfin_read16(DMA0_CURR_Y_COUNT) +#define bfin_write_DMA0_CURR_Y_COUNT(val) bfin_write16(DMA0_CURR_Y_COUNT, val) +#define bfin_read_DMA1_NEXT_DESC_PTR() bfin_readPTR(DMA1_NEXT_DESC_PTR) +#define bfin_write_DMA1_NEXT_DESC_PTR(val) bfin_writePTR(DMA1_NEXT_DESC_PTR, val) +#define bfin_read_DMA1_START_ADDR() bfin_readPTR(DMA1_START_ADDR) +#define bfin_write_DMA1_START_ADDR(val) bfin_writePTR(DMA1_START_ADDR, val) +#define bfin_read_DMA1_CONFIG() bfin_read16(DMA1_CONFIG) +#define bfin_write_DMA1_CONFIG(val) bfin_write16(DMA1_CONFIG, val) +#define bfin_read_DMA1_X_COUNT() bfin_read16(DMA1_X_COUNT) +#define bfin_write_DMA1_X_COUNT(val) bfin_write16(DMA1_X_COUNT, val) +#define bfin_read_DMA1_X_MODIFY() bfin_read16(DMA1_X_MODIFY) +#define bfin_write_DMA1_X_MODIFY(val) bfin_write16(DMA1_X_MODIFY, val) +#define bfin_read_DMA1_Y_COUNT() bfin_read16(DMA1_Y_COUNT) +#define bfin_write_DMA1_Y_COUNT(val) bfin_write16(DMA1_Y_COUNT, val) +#define bfin_read_DMA1_Y_MODIFY() bfin_read16(DMA1_Y_MODIFY) +#define bfin_write_DMA1_Y_MODIFY(val) bfin_write16(DMA1_Y_MODIFY, val) +#define bfin_read_DMA1_CURR_DESC_PTR() bfin_readPTR(DMA1_CURR_DESC_PTR) +#define bfin_write_DMA1_CURR_DESC_PTR(val) bfin_writePTR(DMA1_CURR_DESC_PTR, val) +#define bfin_read_DMA1_CURR_ADDR() bfin_readPTR(DMA1_CURR_ADDR) +#define bfin_write_DMA1_CURR_ADDR(val) bfin_writePTR(DMA1_CURR_ADDR, val) +#define bfin_read_DMA1_IRQ_STATUS() bfin_read16(DMA1_IRQ_STATUS) +#define bfin_write_DMA1_IRQ_STATUS(val) bfin_write16(DMA1_IRQ_STATUS, val) +#define bfin_read_DMA1_PERIPHERAL_MAP() bfin_read16(DMA1_PERIPHERAL_MAP) +#define bfin_write_DMA1_PERIPHERAL_MAP(val) bfin_write16(DMA1_PERIPHERAL_MAP, val) +#define bfin_read_DMA1_CURR_X_COUNT() bfin_read16(DMA1_CURR_X_COUNT) +#define bfin_write_DMA1_CURR_X_COUNT(val) bfin_write16(DMA1_CURR_X_COUNT, val) +#define bfin_read_DMA1_CURR_Y_COUNT() bfin_read16(DMA1_CURR_Y_COUNT) +#define bfin_write_DMA1_CURR_Y_COUNT(val) bfin_write16(DMA1_CURR_Y_COUNT, val) +#define bfin_read_DMA2_NEXT_DESC_PTR() bfin_readPTR(DMA2_NEXT_DESC_PTR) +#define bfin_write_DMA2_NEXT_DESC_PTR(val) bfin_writePTR(DMA2_NEXT_DESC_PTR, val) +#define bfin_read_DMA2_START_ADDR() bfin_readPTR(DMA2_START_ADDR) +#define bfin_write_DMA2_START_ADDR(val) bfin_writePTR(DMA2_START_ADDR, val) +#define bfin_read_DMA2_CONFIG() bfin_read16(DMA2_CONFIG) +#define bfin_write_DMA2_CONFIG(val) bfin_write16(DMA2_CONFIG, val) +#define bfin_read_DMA2_X_COUNT() bfin_read16(DMA2_X_COUNT) +#define bfin_write_DMA2_X_COUNT(val) bfin_write16(DMA2_X_COUNT, val) +#define bfin_read_DMA2_X_MODIFY() bfin_read16(DMA2_X_MODIFY) +#define bfin_write_DMA2_X_MODIFY(val) bfin_write16(DMA2_X_MODIFY, val) +#define bfin_read_DMA2_Y_COUNT() bfin_read16(DMA2_Y_COUNT) +#define bfin_write_DMA2_Y_COUNT(val) bfin_write16(DMA2_Y_COUNT, val) +#define bfin_read_DMA2_Y_MODIFY() bfin_read16(DMA2_Y_MODIFY) +#define bfin_write_DMA2_Y_MODIFY(val) bfin_write16(DMA2_Y_MODIFY, val) +#define bfin_read_DMA2_CURR_DESC_PTR() bfin_readPTR(DMA2_CURR_DESC_PTR) +#define bfin_write_DMA2_CURR_DESC_PTR(val) bfin_writePTR(DMA2_CURR_DESC_PTR, val) +#define bfin_read_DMA2_CURR_ADDR() bfin_readPTR(DMA2_CURR_ADDR) +#define bfin_write_DMA2_CURR_ADDR(val) bfin_writePTR(DMA2_CURR_ADDR, val) +#define bfin_read_DMA2_IRQ_STATUS() bfin_read16(DMA2_IRQ_STATUS) +#define bfin_write_DMA2_IRQ_STATUS(val) bfin_write16(DMA2_IRQ_STATUS, val) +#define bfin_read_DMA2_PERIPHERAL_MAP() bfin_read16(DMA2_PERIPHERAL_MAP) +#define bfin_write_DMA2_PERIPHERAL_MAP(val) bfin_write16(DMA2_PERIPHERAL_MAP, val) +#define bfin_read_DMA2_CURR_X_COUNT() bfin_read16(DMA2_CURR_X_COUNT) +#define bfin_write_DMA2_CURR_X_COUNT(val) bfin_write16(DMA2_CURR_X_COUNT, val) +#define bfin_read_DMA2_CURR_Y_COUNT() bfin_read16(DMA2_CURR_Y_COUNT) +#define bfin_write_DMA2_CURR_Y_COUNT(val) bfin_write16(DMA2_CURR_Y_COUNT, val) +#define bfin_read_DMA3_NEXT_DESC_PTR() bfin_readPTR(DMA3_NEXT_DESC_PTR) +#define bfin_write_DMA3_NEXT_DESC_PTR(val) bfin_writePTR(DMA3_NEXT_DESC_PTR, val) +#define bfin_read_DMA3_START_ADDR() bfin_readPTR(DMA3_START_ADDR) +#define bfin_write_DMA3_START_ADDR(val) bfin_writePTR(DMA3_START_ADDR, val) +#define bfin_read_DMA3_CONFIG() bfin_read16(DMA3_CONFIG) +#define bfin_write_DMA3_CONFIG(val) bfin_write16(DMA3_CONFIG, val) +#define bfin_read_DMA3_X_COUNT() bfin_read16(DMA3_X_COUNT) +#define bfin_write_DMA3_X_COUNT(val) bfin_write16(DMA3_X_COUNT, val) +#define bfin_read_DMA3_X_MODIFY() bfin_read16(DMA3_X_MODIFY) +#define bfin_write_DMA3_X_MODIFY(val) bfin_write16(DMA3_X_MODIFY, val) +#define bfin_read_DMA3_Y_COUNT() bfin_read16(DMA3_Y_COUNT) +#define bfin_write_DMA3_Y_COUNT(val) bfin_write16(DMA3_Y_COUNT, val) +#define bfin_read_DMA3_Y_MODIFY() bfin_read16(DMA3_Y_MODIFY) +#define bfin_write_DMA3_Y_MODIFY(val) bfin_write16(DMA3_Y_MODIFY, val) +#define bfin_read_DMA3_CURR_DESC_PTR() bfin_readPTR(DMA3_CURR_DESC_PTR) +#define bfin_write_DMA3_CURR_DESC_PTR(val) bfin_writePTR(DMA3_CURR_DESC_PTR, val) +#define bfin_read_DMA3_CURR_ADDR() bfin_readPTR(DMA3_CURR_ADDR) +#define bfin_write_DMA3_CURR_ADDR(val) bfin_writePTR(DMA3_CURR_ADDR, val) +#define bfin_read_DMA3_IRQ_STATUS() bfin_read16(DMA3_IRQ_STATUS) +#define bfin_write_DMA3_IRQ_STATUS(val) bfin_write16(DMA3_IRQ_STATUS, val) +#define bfin_read_DMA3_PERIPHERAL_MAP() bfin_read16(DMA3_PERIPHERAL_MAP) +#define bfin_write_DMA3_PERIPHERAL_MAP(val) bfin_write16(DMA3_PERIPHERAL_MAP, val) +#define bfin_read_DMA3_CURR_X_COUNT() bfin_read16(DMA3_CURR_X_COUNT) +#define bfin_write_DMA3_CURR_X_COUNT(val) bfin_write16(DMA3_CURR_X_COUNT, val) +#define bfin_read_DMA3_CURR_Y_COUNT() bfin_read16(DMA3_CURR_Y_COUNT) +#define bfin_write_DMA3_CURR_Y_COUNT(val) bfin_write16(DMA3_CURR_Y_COUNT, val) +#define bfin_read_DMA4_NEXT_DESC_PTR() bfin_readPTR(DMA4_NEXT_DESC_PTR) +#define bfin_write_DMA4_NEXT_DESC_PTR(val) bfin_writePTR(DMA4_NEXT_DESC_PTR, val) +#define bfin_read_DMA4_START_ADDR() bfin_readPTR(DMA4_START_ADDR) +#define bfin_write_DMA4_START_ADDR(val) bfin_writePTR(DMA4_START_ADDR, val) +#define bfin_read_DMA4_CONFIG() bfin_read16(DMA4_CONFIG) +#define bfin_write_DMA4_CONFIG(val) bfin_write16(DMA4_CONFIG, val) +#define bfin_read_DMA4_X_COUNT() bfin_read16(DMA4_X_COUNT) +#define bfin_write_DMA4_X_COUNT(val) bfin_write16(DMA4_X_COUNT, val) +#define bfin_read_DMA4_X_MODIFY() bfin_read16(DMA4_X_MODIFY) +#define bfin_write_DMA4_X_MODIFY(val) bfin_write16(DMA4_X_MODIFY, val) +#define bfin_read_DMA4_Y_COUNT() bfin_read16(DMA4_Y_COUNT) +#define bfin_write_DMA4_Y_COUNT(val) bfin_write16(DMA4_Y_COUNT, val) +#define bfin_read_DMA4_Y_MODIFY() bfin_read16(DMA4_Y_MODIFY) +#define bfin_write_DMA4_Y_MODIFY(val) bfin_write16(DMA4_Y_MODIFY, val) +#define bfin_read_DMA4_CURR_DESC_PTR() bfin_readPTR(DMA4_CURR_DESC_PTR) +#define bfin_write_DMA4_CURR_DESC_PTR(val) bfin_writePTR(DMA4_CURR_DESC_PTR, val) +#define bfin_read_DMA4_CURR_ADDR() bfin_readPTR(DMA4_CURR_ADDR) +#define bfin_write_DMA4_CURR_ADDR(val) bfin_writePTR(DMA4_CURR_ADDR, val) +#define bfin_read_DMA4_IRQ_STATUS() bfin_read16(DMA4_IRQ_STATUS) +#define bfin_write_DMA4_IRQ_STATUS(val) bfin_write16(DMA4_IRQ_STATUS, val) +#define bfin_read_DMA4_PERIPHERAL_MAP() bfin_read16(DMA4_PERIPHERAL_MAP) +#define bfin_write_DMA4_PERIPHERAL_MAP(val) bfin_write16(DMA4_PERIPHERAL_MAP, val) +#define bfin_read_DMA4_CURR_X_COUNT() bfin_read16(DMA4_CURR_X_COUNT) +#define bfin_write_DMA4_CURR_X_COUNT(val) bfin_write16(DMA4_CURR_X_COUNT, val) +#define bfin_read_DMA4_CURR_Y_COUNT() bfin_read16(DMA4_CURR_Y_COUNT) +#define bfin_write_DMA4_CURR_Y_COUNT(val) bfin_write16(DMA4_CURR_Y_COUNT, val) +#define bfin_read_DMA5_NEXT_DESC_PTR() bfin_readPTR(DMA5_NEXT_DESC_PTR) +#define bfin_write_DMA5_NEXT_DESC_PTR(val) bfin_writePTR(DMA5_NEXT_DESC_PTR, val) +#define bfin_read_DMA5_START_ADDR() bfin_readPTR(DMA5_START_ADDR) +#define bfin_write_DMA5_START_ADDR(val) bfin_writePTR(DMA5_START_ADDR, val) +#define bfin_read_DMA5_CONFIG() bfin_read16(DMA5_CONFIG) +#define bfin_write_DMA5_CONFIG(val) bfin_write16(DMA5_CONFIG, val) +#define bfin_read_DMA5_X_COUNT() bfin_read16(DMA5_X_COUNT) +#define bfin_write_DMA5_X_COUNT(val) bfin_write16(DMA5_X_COUNT, val) +#define bfin_read_DMA5_X_MODIFY() bfin_read16(DMA5_X_MODIFY) +#define bfin_write_DMA5_X_MODIFY(val) bfin_write16(DMA5_X_MODIFY, val) +#define bfin_read_DMA5_Y_COUNT() bfin_read16(DMA5_Y_COUNT) +#define bfin_write_DMA5_Y_COUNT(val) bfin_write16(DMA5_Y_COUNT, val) +#define bfin_read_DMA5_Y_MODIFY() bfin_read16(DMA5_Y_MODIFY) +#define bfin_write_DMA5_Y_MODIFY(val) bfin_write16(DMA5_Y_MODIFY, val) +#define bfin_read_DMA5_CURR_DESC_PTR() bfin_readPTR(DMA5_CURR_DESC_PTR) +#define bfin_write_DMA5_CURR_DESC_PTR(val) bfin_writePTR(DMA5_CURR_DESC_PTR, val) +#define bfin_read_DMA5_CURR_ADDR() bfin_readPTR(DMA5_CURR_ADDR) +#define bfin_write_DMA5_CURR_ADDR(val) bfin_writePTR(DMA5_CURR_ADDR, val) +#define bfin_read_DMA5_IRQ_STATUS() bfin_read16(DMA5_IRQ_STATUS) +#define bfin_write_DMA5_IRQ_STATUS(val) bfin_write16(DMA5_IRQ_STATUS, val) +#define bfin_read_DMA5_PERIPHERAL_MAP() bfin_read16(DMA5_PERIPHERAL_MAP) +#define bfin_write_DMA5_PERIPHERAL_MAP(val) bfin_write16(DMA5_PERIPHERAL_MAP, val) +#define bfin_read_DMA5_CURR_X_COUNT() bfin_read16(DMA5_CURR_X_COUNT) +#define bfin_write_DMA5_CURR_X_COUNT(val) bfin_write16(DMA5_CURR_X_COUNT, val) +#define bfin_read_DMA5_CURR_Y_COUNT() bfin_read16(DMA5_CURR_Y_COUNT) +#define bfin_write_DMA5_CURR_Y_COUNT(val) bfin_write16(DMA5_CURR_Y_COUNT, val) +#define bfin_read_DMA6_NEXT_DESC_PTR() bfin_read32(DMA6_NEXT_DESC_PTR) +#define bfin_write_DMA6_NEXT_DESC_PTR(val) bfin_write32(DMA6_NEXT_DESC_PTR, val) +#define bfin_read_DMA6_START_ADDR() bfin_readPTR(DMA6_START_ADDR) +#define bfin_write_DMA6_START_ADDR(val) bfin_writePTR(DMA6_START_ADDR, val) +#define bfin_read_DMA6_CONFIG() bfin_read16(DMA6_CONFIG) +#define bfin_write_DMA6_CONFIG(val) bfin_write16(DMA6_CONFIG, val) +#define bfin_read_DMA6_X_COUNT() bfin_read16(DMA6_X_COUNT) +#define bfin_write_DMA6_X_COUNT(val) bfin_write16(DMA6_X_COUNT, val) +#define bfin_read_DMA6_X_MODIFY() bfin_read16(DMA6_X_MODIFY) +#define bfin_write_DMA6_X_MODIFY(val) bfin_write16(DMA6_X_MODIFY, val) +#define bfin_read_DMA6_Y_COUNT() bfin_read16(DMA6_Y_COUNT) +#define bfin_write_DMA6_Y_COUNT(val) bfin_write16(DMA6_Y_COUNT, val) +#define bfin_read_DMA6_Y_MODIFY() bfin_read16(DMA6_Y_MODIFY) +#define bfin_write_DMA6_Y_MODIFY(val) bfin_write16(DMA6_Y_MODIFY, val) +#define bfin_read_DMA6_CURR_DESC_PTR() bfin_readPTR(DMA6_CURR_DESC_PTR) +#define bfin_write_DMA6_CURR_DESC_PTR(val) bfin_writePTR(DMA6_CURR_DESC_PTR, val) +#define bfin_read_DMA6_CURR_ADDR() bfin_readPTR(DMA6_CURR_ADDR) +#define bfin_write_DMA6_CURR_ADDR(val) bfin_writePTR(DMA6_CURR_ADDR, val) +#define bfin_read_DMA6_IRQ_STATUS() bfin_read16(DMA6_IRQ_STATUS) +#define bfin_write_DMA6_IRQ_STATUS(val) bfin_write16(DMA6_IRQ_STATUS, val) +#define bfin_read_DMA6_PERIPHERAL_MAP() bfin_read16(DMA6_PERIPHERAL_MAP) +#define bfin_write_DMA6_PERIPHERAL_MAP(val) bfin_write16(DMA6_PERIPHERAL_MAP, val) +#define bfin_read_DMA6_CURR_X_COUNT() bfin_read16(DMA6_CURR_X_COUNT) +#define bfin_write_DMA6_CURR_X_COUNT(val) bfin_write16(DMA6_CURR_X_COUNT, val) +#define bfin_read_DMA6_CURR_Y_COUNT() bfin_read16(DMA6_CURR_Y_COUNT) +#define bfin_write_DMA6_CURR_Y_COUNT(val) bfin_write16(DMA6_CURR_Y_COUNT, val) +#define bfin_read_DMA7_NEXT_DESC_PTR() bfin_readPTR(DMA7_NEXT_DESC_PTR) +#define bfin_write_DMA7_NEXT_DESC_PTR(val) bfin_writePTR(DMA7_NEXT_DESC_PTR, val) +#define bfin_read_DMA7_START_ADDR() bfin_readPTR(DMA7_START_ADDR) +#define bfin_write_DMA7_START_ADDR(val) bfin_writePTR(DMA7_START_ADDR, val) +#define bfin_read_DMA7_CONFIG() bfin_read16(DMA7_CONFIG) +#define bfin_write_DMA7_CONFIG(val) bfin_write16(DMA7_CONFIG, val) +#define bfin_read_DMA7_X_COUNT() bfin_read16(DMA7_X_COUNT) +#define bfin_write_DMA7_X_COUNT(val) bfin_write16(DMA7_X_COUNT, val) +#define bfin_read_DMA7_X_MODIFY() bfin_read16(DMA7_X_MODIFY) +#define bfin_write_DMA7_X_MODIFY(val) bfin_write16(DMA7_X_MODIFY, val) +#define bfin_read_DMA7_Y_COUNT() bfin_read16(DMA7_Y_COUNT) +#define bfin_write_DMA7_Y_COUNT(val) bfin_write16(DMA7_Y_COUNT, val) +#define bfin_read_DMA7_Y_MODIFY() bfin_read16(DMA7_Y_MODIFY) +#define bfin_write_DMA7_Y_MODIFY(val) bfin_write16(DMA7_Y_MODIFY, val) +#define bfin_read_DMA7_CURR_DESC_PTR() bfin_readPTR(DMA7_CURR_DESC_PTR) +#define bfin_write_DMA7_CURR_DESC_PTR(val) bfin_writePTR(DMA7_CURR_DESC_PTR, val) +#define bfin_read_DMA7_CURR_ADDR() bfin_readPTR(DMA7_CURR_ADDR) +#define bfin_write_DMA7_CURR_ADDR(val) bfin_writePTR(DMA7_CURR_ADDR, val) +#define bfin_read_DMA7_IRQ_STATUS() bfin_read16(DMA7_IRQ_STATUS) +#define bfin_write_DMA7_IRQ_STATUS(val) bfin_write16(DMA7_IRQ_STATUS, val) +#define bfin_read_DMA7_PERIPHERAL_MAP() bfin_read16(DMA7_PERIPHERAL_MAP) +#define bfin_write_DMA7_PERIPHERAL_MAP(val) bfin_write16(DMA7_PERIPHERAL_MAP, val) +#define bfin_read_DMA7_CURR_X_COUNT() bfin_read16(DMA7_CURR_X_COUNT) +#define bfin_write_DMA7_CURR_X_COUNT(val) bfin_write16(DMA7_CURR_X_COUNT, val) +#define bfin_read_DMA7_CURR_Y_COUNT() bfin_read16(DMA7_CURR_Y_COUNT) +#define bfin_write_DMA7_CURR_Y_COUNT(val) bfin_write16(DMA7_CURR_Y_COUNT, val) +#define bfin_read_DMA8_NEXT_DESC_PTR() bfin_readPTR(DMA8_NEXT_DESC_PTR) +#define bfin_write_DMA8_NEXT_DESC_PTR(val) bfin_writePTR(DMA8_NEXT_DESC_PTR, val) +#define bfin_read_DMA8_START_ADDR() bfin_readPTR(DMA8_START_ADDR) +#define bfin_write_DMA8_START_ADDR(val) bfin_writePTR(DMA8_START_ADDR, val) +#define bfin_read_DMA8_CONFIG() bfin_read16(DMA8_CONFIG) +#define bfin_write_DMA8_CONFIG(val) bfin_write16(DMA8_CONFIG, val) +#define bfin_read_DMA8_X_COUNT() bfin_read16(DMA8_X_COUNT) +#define bfin_write_DMA8_X_COUNT(val) bfin_write16(DMA8_X_COUNT, val) +#define bfin_read_DMA8_X_MODIFY() bfin_read16(DMA8_X_MODIFY) +#define bfin_write_DMA8_X_MODIFY(val) bfin_write16(DMA8_X_MODIFY, val) +#define bfin_read_DMA8_Y_COUNT() bfin_read16(DMA8_Y_COUNT) +#define bfin_write_DMA8_Y_COUNT(val) bfin_write16(DMA8_Y_COUNT, val) +#define bfin_read_DMA8_Y_MODIFY() bfin_read16(DMA8_Y_MODIFY) +#define bfin_write_DMA8_Y_MODIFY(val) bfin_write16(DMA8_Y_MODIFY, val) +#define bfin_read_DMA8_CURR_DESC_PTR() bfin_readPTR(DMA8_CURR_DESC_PTR) +#define bfin_write_DMA8_CURR_DESC_PTR(val) bfin_writePTR(DMA8_CURR_DESC_PTR, val) +#define bfin_read_DMA8_CURR_ADDR() bfin_readPTR(DMA8_CURR_ADDR) +#define bfin_write_DMA8_CURR_ADDR(val) bfin_writePTR(DMA8_CURR_ADDR, val) +#define bfin_read_DMA8_IRQ_STATUS() bfin_read16(DMA8_IRQ_STATUS) +#define bfin_write_DMA8_IRQ_STATUS(val) bfin_write16(DMA8_IRQ_STATUS, val) +#define bfin_read_DMA8_PERIPHERAL_MAP() bfin_read16(DMA8_PERIPHERAL_MAP) +#define bfin_write_DMA8_PERIPHERAL_MAP(val) bfin_write16(DMA8_PERIPHERAL_MAP, val) +#define bfin_read_DMA8_CURR_X_COUNT() bfin_read16(DMA8_CURR_X_COUNT) +#define bfin_write_DMA8_CURR_X_COUNT(val) bfin_write16(DMA8_CURR_X_COUNT, val) +#define bfin_read_DMA8_CURR_Y_COUNT() bfin_read16(DMA8_CURR_Y_COUNT) +#define bfin_write_DMA8_CURR_Y_COUNT(val) bfin_write16(DMA8_CURR_Y_COUNT, val) +#define bfin_read_DMA9_NEXT_DESC_PTR() bfin_readPTR(DMA9_NEXT_DESC_PTR) +#define bfin_write_DMA9_NEXT_DESC_PTR(val) bfin_writePTR(DMA9_NEXT_DESC_PTR, val) +#define bfin_read_DMA9_START_ADDR() bfin_readPTR(DMA9_START_ADDR) +#define bfin_write_DMA9_START_ADDR(val) bfin_writePTR(DMA9_START_ADDR, val) +#define bfin_read_DMA9_CONFIG() bfin_read16(DMA9_CONFIG) +#define bfin_write_DMA9_CONFIG(val) bfin_write16(DMA9_CONFIG, val) +#define bfin_read_DMA9_X_COUNT() bfin_read16(DMA9_X_COUNT) +#define bfin_write_DMA9_X_COUNT(val) bfin_write16(DMA9_X_COUNT, val) +#define bfin_read_DMA9_X_MODIFY() bfin_read16(DMA9_X_MODIFY) +#define bfin_write_DMA9_X_MODIFY(val) bfin_write16(DMA9_X_MODIFY, val) +#define bfin_read_DMA9_Y_COUNT() bfin_read16(DMA9_Y_COUNT) +#define bfin_write_DMA9_Y_COUNT(val) bfin_write16(DMA9_Y_COUNT, val) +#define bfin_read_DMA9_Y_MODIFY() bfin_read16(DMA9_Y_MODIFY) +#define bfin_write_DMA9_Y_MODIFY(val) bfin_write16(DMA9_Y_MODIFY, val) +#define bfin_read_DMA9_CURR_DESC_PTR() bfin_readPTR(DMA9_CURR_DESC_PTR) +#define bfin_write_DMA9_CURR_DESC_PTR(val) bfin_writePTR(DMA9_CURR_DESC_PTR, val) +#define bfin_read_DMA9_CURR_ADDR() bfin_readPTR(DMA9_CURR_ADDR) +#define bfin_write_DMA9_CURR_ADDR(val) bfin_writePTR(DMA9_CURR_ADDR, val) +#define bfin_read_DMA9_IRQ_STATUS() bfin_read16(DMA9_IRQ_STATUS) +#define bfin_write_DMA9_IRQ_STATUS(val) bfin_write16(DMA9_IRQ_STATUS, val) +#define bfin_read_DMA9_PERIPHERAL_MAP() bfin_read16(DMA9_PERIPHERAL_MAP) +#define bfin_write_DMA9_PERIPHERAL_MAP(val) bfin_write16(DMA9_PERIPHERAL_MAP, val) +#define bfin_read_DMA9_CURR_X_COUNT() bfin_read16(DMA9_CURR_X_COUNT) +#define bfin_write_DMA9_CURR_X_COUNT(val) bfin_write16(DMA9_CURR_X_COUNT, val) +#define bfin_read_DMA9_CURR_Y_COUNT() bfin_read16(DMA9_CURR_Y_COUNT) +#define bfin_write_DMA9_CURR_Y_COUNT(val) bfin_write16(DMA9_CURR_Y_COUNT, val) +#define bfin_read_DMA10_NEXT_DESC_PTR() bfin_readPTR(DMA10_NEXT_DESC_PTR) +#define bfin_write_DMA10_NEXT_DESC_PTR(val) bfin_writePTR(DMA10_NEXT_DESC_PTR, val) +#define bfin_read_DMA10_START_ADDR() bfin_readPTR(DMA10_START_ADDR) +#define bfin_write_DMA10_START_ADDR(val) bfin_writePTR(DMA10_START_ADDR, val) +#define bfin_read_DMA10_CONFIG() bfin_read16(DMA10_CONFIG) +#define bfin_write_DMA10_CONFIG(val) bfin_write16(DMA10_CONFIG, val) +#define bfin_read_DMA10_X_COUNT() bfin_read16(DMA10_X_COUNT) +#define bfin_write_DMA10_X_COUNT(val) bfin_write16(DMA10_X_COUNT, val) +#define bfin_read_DMA10_X_MODIFY() bfin_read16(DMA10_X_MODIFY) +#define bfin_write_DMA10_X_MODIFY(val) bfin_write16(DMA10_X_MODIFY, val) +#define bfin_read_DMA10_Y_COUNT() bfin_read16(DMA10_Y_COUNT) +#define bfin_write_DMA10_Y_COUNT(val) bfin_write16(DMA10_Y_COUNT, val) +#define bfin_read_DMA10_Y_MODIFY() bfin_read16(DMA10_Y_MODIFY) +#define bfin_write_DMA10_Y_MODIFY(val) bfin_write16(DMA10_Y_MODIFY, val) +#define bfin_read_DMA10_CURR_DESC_PTR() bfin_readPTR(DMA10_CURR_DESC_PTR) +#define bfin_write_DMA10_CURR_DESC_PTR(val) bfin_writePTR(DMA10_CURR_DESC_PTR, val) +#define bfin_read_DMA10_CURR_ADDR() bfin_readPTR(DMA10_CURR_ADDR) +#define bfin_write_DMA10_CURR_ADDR(val) bfin_writePTR(DMA10_CURR_ADDR, val) +#define bfin_read_DMA10_IRQ_STATUS() bfin_read16(DMA10_IRQ_STATUS) +#define bfin_write_DMA10_IRQ_STATUS(val) bfin_write16(DMA10_IRQ_STATUS, val) +#define bfin_read_DMA10_PERIPHERAL_MAP() bfin_read16(DMA10_PERIPHERAL_MAP) +#define bfin_write_DMA10_PERIPHERAL_MAP(val) bfin_write16(DMA10_PERIPHERAL_MAP, val) +#define bfin_read_DMA10_CURR_X_COUNT() bfin_read16(DMA10_CURR_X_COUNT) +#define bfin_write_DMA10_CURR_X_COUNT(val) bfin_write16(DMA10_CURR_X_COUNT, val) +#define bfin_read_DMA10_CURR_Y_COUNT() bfin_read16(DMA10_CURR_Y_COUNT) +#define bfin_write_DMA10_CURR_Y_COUNT(val) bfin_write16(DMA10_CURR_Y_COUNT, val) +#define bfin_read_DMA11_NEXT_DESC_PTR() bfin_readPTR(DMA11_NEXT_DESC_PTR) +#define bfin_write_DMA11_NEXT_DESC_PTR(val) bfin_writePTR(DMA11_NEXT_DESC_PTR, val) +#define bfin_read_DMA11_START_ADDR() bfin_readPTR(DMA11_START_ADDR) +#define bfin_write_DMA11_START_ADDR(val) bfin_writePTR(DMA11_START_ADDR, val) +#define bfin_read_DMA11_CONFIG() bfin_read16(DMA11_CONFIG) +#define bfin_write_DMA11_CONFIG(val) bfin_write16(DMA11_CONFIG, val) +#define bfin_read_DMA11_X_COUNT() bfin_read16(DMA11_X_COUNT) +#define bfin_write_DMA11_X_COUNT(val) bfin_write16(DMA11_X_COUNT, val) +#define bfin_read_DMA11_X_MODIFY() bfin_read16(DMA11_X_MODIFY) +#define bfin_write_DMA11_X_MODIFY(val) bfin_write16(DMA11_X_MODIFY, val) +#define bfin_read_DMA11_Y_COUNT() bfin_read16(DMA11_Y_COUNT) +#define bfin_write_DMA11_Y_COUNT(val) bfin_write16(DMA11_Y_COUNT, val) +#define bfin_read_DMA11_Y_MODIFY() bfin_read16(DMA11_Y_MODIFY) +#define bfin_write_DMA11_Y_MODIFY(val) bfin_write16(DMA11_Y_MODIFY, val) +#define bfin_read_DMA11_CURR_DESC_PTR() bfin_readPTR(DMA11_CURR_DESC_PTR) +#define bfin_write_DMA11_CURR_DESC_PTR(val) bfin_writePTR(DMA11_CURR_DESC_PTR, val) +#define bfin_read_DMA11_CURR_ADDR() bfin_readPTR(DMA11_CURR_ADDR) +#define bfin_write_DMA11_CURR_ADDR(val) bfin_writePTR(DMA11_CURR_ADDR, val) +#define bfin_read_DMA11_IRQ_STATUS() bfin_read16(DMA11_IRQ_STATUS) +#define bfin_write_DMA11_IRQ_STATUS(val) bfin_write16(DMA11_IRQ_STATUS, val) +#define bfin_read_DMA11_PERIPHERAL_MAP() bfin_read16(DMA11_PERIPHERAL_MAP) +#define bfin_write_DMA11_PERIPHERAL_MAP(val) bfin_write16(DMA11_PERIPHERAL_MAP, val) +#define bfin_read_DMA11_CURR_X_COUNT() bfin_read16(DMA11_CURR_X_COUNT) +#define bfin_write_DMA11_CURR_X_COUNT(val) bfin_write16(DMA11_CURR_X_COUNT, val) +#define bfin_read_DMA11_CURR_Y_COUNT() bfin_read16(DMA11_CURR_Y_COUNT) +#define bfin_write_DMA11_CURR_Y_COUNT(val) bfin_write16(DMA11_CURR_Y_COUNT, val) +#define bfin_read_MDMA_S0_NEXT_DESC_PTR() bfin_readPTR(MDMA_S0_NEXT_DESC_PTR) +#define bfin_write_MDMA_S0_NEXT_DESC_PTR(val) bfin_writePTR(MDMA_S0_NEXT_DESC_PTR, val) +#define bfin_read_MDMA_S0_START_ADDR() bfin_readPTR(MDMA_S0_START_ADDR) +#define bfin_write_MDMA_S0_START_ADDR(val) bfin_writePTR(MDMA_S0_START_ADDR, val) +#define bfin_read_MDMA_S0_CONFIG() bfin_read16(MDMA_S0_CONFIG) +#define bfin_write_MDMA_S0_CONFIG(val) bfin_write16(MDMA_S0_CONFIG, val) +#define bfin_read_MDMA_S0_X_COUNT() bfin_read16(MDMA_S0_X_COUNT) +#define bfin_write_MDMA_S0_X_COUNT(val) bfin_write16(MDMA_S0_X_COUNT, val) +#define bfin_read_MDMA_S0_X_MODIFY() bfin_read16(MDMA_S0_X_MODIFY) +#define bfin_write_MDMA_S0_X_MODIFY(val) bfin_write16(MDMA_S0_X_MODIFY, val) +#define bfin_read_MDMA_S0_Y_COUNT() bfin_read16(MDMA_S0_Y_COUNT) +#define bfin_write_MDMA_S0_Y_COUNT(val) bfin_write16(MDMA_S0_Y_COUNT, val) +#define bfin_read_MDMA_S0_Y_MODIFY() bfin_read16(MDMA_S0_Y_MODIFY) +#define bfin_write_MDMA_S0_Y_MODIFY(val) bfin_write16(MDMA_S0_Y_MODIFY, val) +#define bfin_read_MDMA_S0_CURR_DESC_PTR() bfin_readPTR(MDMA_S0_CURR_DESC_PTR) +#define bfin_write_MDMA_S0_CURR_DESC_PTR(val) bfin_writePTR(MDMA_S0_CURR_DESC_PTR, val) +#define bfin_read_MDMA_S0_CURR_ADDR() bfin_readPTR(MDMA_S0_CURR_ADDR) +#define bfin_write_MDMA_S0_CURR_ADDR(val) bfin_writePTR(MDMA_S0_CURR_ADDR, val) +#define bfin_read_MDMA_S0_IRQ_STATUS() bfin_read16(MDMA_S0_IRQ_STATUS) +#define bfin_write_MDMA_S0_IRQ_STATUS(val) bfin_write16(MDMA_S0_IRQ_STATUS, val) +#define bfin_read_MDMA_S0_PERIPHERAL_MAP() bfin_read16(MDMA_S0_PERIPHERAL_MAP) +#define bfin_write_MDMA_S0_PERIPHERAL_MAP(val) bfin_write16(MDMA_S0_PERIPHERAL_MAP, val) +#define bfin_read_MDMA_S0_CURR_X_COUNT() bfin_read16(MDMA_S0_CURR_X_COUNT) +#define bfin_write_MDMA_S0_CURR_X_COUNT(val) bfin_write16(MDMA_S0_CURR_X_COUNT, val) +#define bfin_read_MDMA_S0_CURR_Y_COUNT() bfin_read16(MDMA_S0_CURR_Y_COUNT) +#define bfin_write_MDMA_S0_CURR_Y_COUNT(val) bfin_write16(MDMA_S0_CURR_Y_COUNT, val) +#define bfin_read_MDMA_D0_NEXT_DESC_PTR() bfin_readPTR(MDMA_D0_NEXT_DESC_PTR) +#define bfin_write_MDMA_D0_NEXT_DESC_PTR(val) bfin_writePTR(MDMA_D0_NEXT_DESC_PTR, val) +#define bfin_read_MDMA_D0_START_ADDR() bfin_readPTR(MDMA_D0_START_ADDR) +#define bfin_write_MDMA_D0_START_ADDR(val) bfin_writePTR(MDMA_D0_START_ADDR, val) +#define bfin_read_MDMA_D0_CONFIG() bfin_read16(MDMA_D0_CONFIG) +#define bfin_write_MDMA_D0_CONFIG(val) bfin_write16(MDMA_D0_CONFIG, val) +#define bfin_read_MDMA_D0_X_COUNT() bfin_read16(MDMA_D0_X_COUNT) +#define bfin_write_MDMA_D0_X_COUNT(val) bfin_write16(MDMA_D0_X_COUNT, val) +#define bfin_read_MDMA_D0_X_MODIFY() bfin_read16(MDMA_D0_X_MODIFY) +#define bfin_write_MDMA_D0_X_MODIFY(val) bfin_write16(MDMA_D0_X_MODIFY, val) +#define bfin_read_MDMA_D0_Y_COUNT() bfin_read16(MDMA_D0_Y_COUNT) +#define bfin_write_MDMA_D0_Y_COUNT(val) bfin_write16(MDMA_D0_Y_COUNT, val) +#define bfin_read_MDMA_D0_Y_MODIFY() bfin_read16(MDMA_D0_Y_MODIFY) +#define bfin_write_MDMA_D0_Y_MODIFY(val) bfin_write16(MDMA_D0_Y_MODIFY, val) +#define bfin_read_MDMA_D0_CURR_DESC_PTR() bfin_readPTR(MDMA_D0_CURR_DESC_PTR) +#define bfin_write_MDMA_D0_CURR_DESC_PTR(val) bfin_writePTR(MDMA_D0_CURR_DESC_PTR, val) +#define bfin_read_MDMA_D0_CURR_ADDR() bfin_readPTR(MDMA_D0_CURR_ADDR) +#define bfin_write_MDMA_D0_CURR_ADDR(val) bfin_writePTR(MDMA_D0_CURR_ADDR, val) +#define bfin_read_MDMA_D0_IRQ_STATUS() bfin_read16(MDMA_D0_IRQ_STATUS) +#define bfin_write_MDMA_D0_IRQ_STATUS(val) bfin_write16(MDMA_D0_IRQ_STATUS, val) +#define bfin_read_MDMA_D0_PERIPHERAL_MAP() bfin_read16(MDMA_D0_PERIPHERAL_MAP) +#define bfin_write_MDMA_D0_PERIPHERAL_MAP(val) bfin_write16(MDMA_D0_PERIPHERAL_MAP, val) +#define bfin_read_MDMA_D0_CURR_X_COUNT() bfin_read16(MDMA_D0_CURR_X_COUNT) +#define bfin_write_MDMA_D0_CURR_X_COUNT(val) bfin_write16(MDMA_D0_CURR_X_COUNT, val) +#define bfin_read_MDMA_D0_CURR_Y_COUNT() bfin_read16(MDMA_D0_CURR_Y_COUNT) +#define bfin_write_MDMA_D0_CURR_Y_COUNT(val) bfin_write16(MDMA_D0_CURR_Y_COUNT, val) +#define bfin_read_MDMA_S1_NEXT_DESC_PTR() bfin_readPTR(MDMA_S1_NEXT_DESC_PTR) +#define bfin_write_MDMA_S1_NEXT_DESC_PTR(val) bfin_writePTR(MDMA_S1_NEXT_DESC_PTR, val) +#define bfin_read_MDMA_S1_START_ADDR() bfin_readPTR(MDMA_S1_START_ADDR) +#define bfin_write_MDMA_S1_START_ADDR(val) bfin_writePTR(MDMA_S1_START_ADDR, val) +#define bfin_read_MDMA_S1_CONFIG() bfin_read16(MDMA_S1_CONFIG) +#define bfin_write_MDMA_S1_CONFIG(val) bfin_write16(MDMA_S1_CONFIG, val) +#define bfin_read_MDMA_S1_X_COUNT() bfin_read16(MDMA_S1_X_COUNT) +#define bfin_write_MDMA_S1_X_COUNT(val) bfin_write16(MDMA_S1_X_COUNT, val) +#define bfin_read_MDMA_S1_X_MODIFY() bfin_read16(MDMA_S1_X_MODIFY) +#define bfin_write_MDMA_S1_X_MODIFY(val) bfin_write16(MDMA_S1_X_MODIFY, val) +#define bfin_read_MDMA_S1_Y_COUNT() bfin_read16(MDMA_S1_Y_COUNT) +#define bfin_write_MDMA_S1_Y_COUNT(val) bfin_write16(MDMA_S1_Y_COUNT, val) +#define bfin_read_MDMA_S1_Y_MODIFY() bfin_read16(MDMA_S1_Y_MODIFY) +#define bfin_write_MDMA_S1_Y_MODIFY(val) bfin_write16(MDMA_S1_Y_MODIFY, val) +#define bfin_read_MDMA_S1_CURR_DESC_PTR() bfin_readPTR(MDMA_S1_CURR_DESC_PTR) +#define bfin_write_MDMA_S1_CURR_DESC_PTR(val) bfin_writePTR(MDMA_S1_CURR_DESC_PTR, val) +#define bfin_read_MDMA_S1_CURR_ADDR() bfin_readPTR(MDMA_S1_CURR_ADDR) +#define bfin_write_MDMA_S1_CURR_ADDR(val) bfin_writePTR(MDMA_S1_CURR_ADDR, val) +#define bfin_read_MDMA_S1_IRQ_STATUS() bfin_read16(MDMA_S1_IRQ_STATUS) +#define bfin_write_MDMA_S1_IRQ_STATUS(val) bfin_write16(MDMA_S1_IRQ_STATUS, val) +#define bfin_read_MDMA_S1_PERIPHERAL_MAP() bfin_read16(MDMA_S1_PERIPHERAL_MAP) +#define bfin_write_MDMA_S1_PERIPHERAL_MAP(val) bfin_write16(MDMA_S1_PERIPHERAL_MAP, val) +#define bfin_read_MDMA_S1_CURR_X_COUNT() bfin_read16(MDMA_S1_CURR_X_COUNT) +#define bfin_write_MDMA_S1_CURR_X_COUNT(val) bfin_write16(MDMA_S1_CURR_X_COUNT, val) +#define bfin_read_MDMA_S1_CURR_Y_COUNT() bfin_read16(MDMA_S1_CURR_Y_COUNT) +#define bfin_write_MDMA_S1_CURR_Y_COUNT(val) bfin_write16(MDMA_S1_CURR_Y_COUNT, val) +#define bfin_read_MDMA_D1_NEXT_DESC_PTR() bfin_readPTR(MDMA_D1_NEXT_DESC_PTR) +#define bfin_write_MDMA_D1_NEXT_DESC_PTR(val) bfin_writePTR(MDMA_D1_NEXT_DESC_PTR, val) +#define bfin_read_MDMA_D1_START_ADDR() bfin_readPTR(MDMA_D1_START_ADDR) +#define bfin_write_MDMA_D1_START_ADDR(val) bfin_writePTR(MDMA_D1_START_ADDR, val) +#define bfin_read_MDMA_D1_CONFIG() bfin_read16(MDMA_D1_CONFIG) +#define bfin_write_MDMA_D1_CONFIG(val) bfin_write16(MDMA_D1_CONFIG, val) +#define bfin_read_MDMA_D1_X_COUNT() bfin_read16(MDMA_D1_X_COUNT) +#define bfin_write_MDMA_D1_X_COUNT(val) bfin_write16(MDMA_D1_X_COUNT, val) +#define bfin_read_MDMA_D1_X_MODIFY() bfin_read16(MDMA_D1_X_MODIFY) +#define bfin_write_MDMA_D1_X_MODIFY(val) bfin_write16(MDMA_D1_X_MODIFY, val) +#define bfin_read_MDMA_D1_Y_COUNT() bfin_read16(MDMA_D1_Y_COUNT) +#define bfin_write_MDMA_D1_Y_COUNT(val) bfin_write16(MDMA_D1_Y_COUNT, val) +#define bfin_read_MDMA_D1_Y_MODIFY() bfin_read16(MDMA_D1_Y_MODIFY) +#define bfin_write_MDMA_D1_Y_MODIFY(val) bfin_write16(MDMA_D1_Y_MODIFY, val) +#define bfin_read_MDMA_D1_CURR_DESC_PTR() bfin_readPTR(MDMA_D1_CURR_DESC_PTR) +#define bfin_write_MDMA_D1_CURR_DESC_PTR(val) bfin_writePTR(MDMA_D1_CURR_DESC_PTR, val) +#define bfin_read_MDMA_D1_CURR_ADDR() bfin_readPTR(MDMA_D1_CURR_ADDR) +#define bfin_write_MDMA_D1_CURR_ADDR(val) bfin_writePTR(MDMA_D1_CURR_ADDR, val) +#define bfin_read_MDMA_D1_IRQ_STATUS() bfin_read16(MDMA_D1_IRQ_STATUS) +#define bfin_write_MDMA_D1_IRQ_STATUS(val) bfin_write16(MDMA_D1_IRQ_STATUS, val) +#define bfin_read_MDMA_D1_PERIPHERAL_MAP() bfin_read16(MDMA_D1_PERIPHERAL_MAP) +#define bfin_write_MDMA_D1_PERIPHERAL_MAP(val) bfin_write16(MDMA_D1_PERIPHERAL_MAP, val) +#define bfin_read_MDMA_D1_CURR_X_COUNT() bfin_read16(MDMA_D1_CURR_X_COUNT) +#define bfin_write_MDMA_D1_CURR_X_COUNT(val) bfin_write16(MDMA_D1_CURR_X_COUNT, val) +#define bfin_read_MDMA_D1_CURR_Y_COUNT() bfin_read16(MDMA_D1_CURR_Y_COUNT) +#define bfin_write_MDMA_D1_CURR_Y_COUNT(val) bfin_write16(MDMA_D1_CURR_Y_COUNT, val) +#define bfin_read_PPI_CONTROL() bfin_read16(PPI_CONTROL) +#define bfin_write_PPI_CONTROL(val) bfin_write16(PPI_CONTROL, val) +#define bfin_read_PPI_STATUS() bfin_read16(PPI_STATUS) +#define bfin_write_PPI_STATUS(val) bfin_write16(PPI_STATUS, val) +#define bfin_read_PPI_COUNT() bfin_read16(PPI_COUNT) +#define bfin_write_PPI_COUNT(val) bfin_write16(PPI_COUNT, val) +#define bfin_read_PPI_DELAY() bfin_read16(PPI_DELAY) +#define bfin_write_PPI_DELAY(val) bfin_write16(PPI_DELAY, val) +#define bfin_read_PPI_FRAME() bfin_read16(PPI_FRAME) +#define bfin_write_PPI_FRAME(val) bfin_write16(PPI_FRAME, val) +#define bfin_read_TWI_CLKDIV() bfin_read16(TWI_CLKDIV) +#define bfin_write_TWI_CLKDIV(val) bfin_write16(TWI_CLKDIV, val) +#define bfin_read_TWI_CONTROL() bfin_read16(TWI_CONTROL) +#define bfin_write_TWI_CONTROL(val) bfin_write16(TWI_CONTROL, val) +#define bfin_read_TWI_SLAVE_CTL() bfin_read16(TWI_SLAVE_CTL) +#define bfin_write_TWI_SLAVE_CTL(val) bfin_write16(TWI_SLAVE_CTL, val) +#define bfin_read_TWI_SLAVE_STAT() bfin_read16(TWI_SLAVE_STAT) +#define bfin_write_TWI_SLAVE_STAT(val) bfin_write16(TWI_SLAVE_STAT, val) +#define bfin_read_TWI_SLAVE_ADDR() bfin_read16(TWI_SLAVE_ADDR) +#define bfin_write_TWI_SLAVE_ADDR(val) bfin_write16(TWI_SLAVE_ADDR, val) +#define bfin_read_TWI_MASTER_CTL() bfin_read16(TWI_MASTER_CTL) +#define bfin_write_TWI_MASTER_CTL(val) bfin_write16(TWI_MASTER_CTL, val) +#define bfin_read_TWI_MASTER_STAT() bfin_read16(TWI_MASTER_STAT) +#define bfin_write_TWI_MASTER_STAT(val) bfin_write16(TWI_MASTER_STAT, val) +#define bfin_read_TWI_MASTER_ADDR() bfin_read16(TWI_MASTER_ADDR) +#define bfin_write_TWI_MASTER_ADDR(val) bfin_write16(TWI_MASTER_ADDR, val) +#define bfin_read_TWI_INT_STAT() bfin_read16(TWI_INT_STAT) +#define bfin_write_TWI_INT_STAT(val) bfin_write16(TWI_INT_STAT, val) +#define bfin_read_TWI_INT_MASK() bfin_read16(TWI_INT_MASK) +#define bfin_write_TWI_INT_MASK(val) bfin_write16(TWI_INT_MASK, val) +#define bfin_read_TWI_FIFO_CTL() bfin_read16(TWI_FIFO_CTL) +#define bfin_write_TWI_FIFO_CTL(val) bfin_write16(TWI_FIFO_CTL, val) +#define bfin_read_TWI_FIFO_STAT() bfin_read16(TWI_FIFO_STAT) +#define bfin_write_TWI_FIFO_STAT(val) bfin_write16(TWI_FIFO_STAT, val) +#define bfin_read_TWI_XMT_DATA8() bfin_read16(TWI_XMT_DATA8) +#define bfin_write_TWI_XMT_DATA8(val) bfin_write16(TWI_XMT_DATA8, val) +#define bfin_read_TWI_XMT_DATA16() bfin_read16(TWI_XMT_DATA16) +#define bfin_write_TWI_XMT_DATA16(val) bfin_write16(TWI_XMT_DATA16, val) +#define bfin_read_TWI_RCV_DATA8() bfin_read16(TWI_RCV_DATA8) +#define bfin_write_TWI_RCV_DATA8(val) bfin_write16(TWI_RCV_DATA8, val) +#define bfin_read_TWI_RCV_DATA16() bfin_read16(TWI_RCV_DATA16) +#define bfin_write_TWI_RCV_DATA16(val) bfin_write16(TWI_RCV_DATA16, val) +#define bfin_read_PORTGIO() bfin_read16(PORTGIO) +#define bfin_write_PORTGIO(val) bfin_write16(PORTGIO, val) +#define bfin_read_PORTGIO_CLEAR() bfin_read16(PORTGIO_CLEAR) +#define bfin_write_PORTGIO_CLEAR(val) bfin_write16(PORTGIO_CLEAR, val) +#define bfin_read_PORTGIO_SET() bfin_read16(PORTGIO_SET) +#define bfin_write_PORTGIO_SET(val) bfin_write16(PORTGIO_SET, val) +#define bfin_read_PORTGIO_TOGGLE() bfin_read16(PORTGIO_TOGGLE) +#define bfin_write_PORTGIO_TOGGLE(val) bfin_write16(PORTGIO_TOGGLE, val) +#define bfin_read_PORTGIO_MASKA() bfin_read16(PORTGIO_MASKA) +#define bfin_write_PORTGIO_MASKA(val) bfin_write16(PORTGIO_MASKA, val) +#define bfin_read_PORTGIO_MASKA_CLEAR() bfin_read16(PORTGIO_MASKA_CLEAR) +#define bfin_write_PORTGIO_MASKA_CLEAR(val) bfin_write16(PORTGIO_MASKA_CLEAR, val) +#define bfin_read_PORTGIO_MASKA_SET() bfin_read16(PORTGIO_MASKA_SET) +#define bfin_write_PORTGIO_MASKA_SET(val) bfin_write16(PORTGIO_MASKA_SET, val) +#define bfin_read_PORTGIO_MASKA_TOGGLE() bfin_read16(PORTGIO_MASKA_TOGGLE) +#define bfin_write_PORTGIO_MASKA_TOGGLE(val) bfin_write16(PORTGIO_MASKA_TOGGLE, val) +#define bfin_read_PORTGIO_MASKB() bfin_read16(PORTGIO_MASKB) +#define bfin_write_PORTGIO_MASKB(val) bfin_write16(PORTGIO_MASKB, val) +#define bfin_read_PORTGIO_MASKB_CLEAR() bfin_read16(PORTGIO_MASKB_CLEAR) +#define bfin_write_PORTGIO_MASKB_CLEAR(val) bfin_write16(PORTGIO_MASKB_CLEAR, val) +#define bfin_read_PORTGIO_MASKB_SET() bfin_read16(PORTGIO_MASKB_SET) +#define bfin_write_PORTGIO_MASKB_SET(val) bfin_write16(PORTGIO_MASKB_SET, val) +#define bfin_read_PORTGIO_MASKB_TOGGLE() bfin_read16(PORTGIO_MASKB_TOGGLE) +#define bfin_write_PORTGIO_MASKB_TOGGLE(val) bfin_write16(PORTGIO_MASKB_TOGGLE, val) +#define bfin_read_PORTGIO_DIR() bfin_read16(PORTGIO_DIR) +#define bfin_write_PORTGIO_DIR(val) bfin_write16(PORTGIO_DIR, val) +#define bfin_read_PORTGIO_POLAR() bfin_read16(PORTGIO_POLAR) +#define bfin_write_PORTGIO_POLAR(val) bfin_write16(PORTGIO_POLAR, val) +#define bfin_read_PORTGIO_EDGE() bfin_read16(PORTGIO_EDGE) +#define bfin_write_PORTGIO_EDGE(val) bfin_write16(PORTGIO_EDGE, val) +#define bfin_read_PORTGIO_BOTH() bfin_read16(PORTGIO_BOTH) +#define bfin_write_PORTGIO_BOTH(val) bfin_write16(PORTGIO_BOTH, val) +#define bfin_read_PORTGIO_INEN() bfin_read16(PORTGIO_INEN) +#define bfin_write_PORTGIO_INEN(val) bfin_write16(PORTGIO_INEN, val) +#define bfin_read_PORTHIO() bfin_read16(PORTHIO) +#define bfin_write_PORTHIO(val) bfin_write16(PORTHIO, val) +#define bfin_read_PORTHIO_CLEAR() bfin_read16(PORTHIO_CLEAR) +#define bfin_write_PORTHIO_CLEAR(val) bfin_write16(PORTHIO_CLEAR, val) +#define bfin_read_PORTHIO_SET() bfin_read16(PORTHIO_SET) +#define bfin_write_PORTHIO_SET(val) bfin_write16(PORTHIO_SET, val) +#define bfin_read_PORTHIO_TOGGLE() bfin_read16(PORTHIO_TOGGLE) +#define bfin_write_PORTHIO_TOGGLE(val) bfin_write16(PORTHIO_TOGGLE, val) +#define bfin_read_PORTHIO_MASKA() bfin_read16(PORTHIO_MASKA) +#define bfin_write_PORTHIO_MASKA(val) bfin_write16(PORTHIO_MASKA, val) +#define bfin_read_PORTHIO_MASKA_CLEAR() bfin_read16(PORTHIO_MASKA_CLEAR) +#define bfin_write_PORTHIO_MASKA_CLEAR(val) bfin_write16(PORTHIO_MASKA_CLEAR, val) +#define bfin_read_PORTHIO_MASKA_SET() bfin_read16(PORTHIO_MASKA_SET) +#define bfin_write_PORTHIO_MASKA_SET(val) bfin_write16(PORTHIO_MASKA_SET, val) +#define bfin_read_PORTHIO_MASKA_TOGGLE() bfin_read16(PORTHIO_MASKA_TOGGLE) +#define bfin_write_PORTHIO_MASKA_TOGGLE(val) bfin_write16(PORTHIO_MASKA_TOGGLE, val) +#define bfin_read_PORTHIO_MASKB() bfin_read16(PORTHIO_MASKB) +#define bfin_write_PORTHIO_MASKB(val) bfin_write16(PORTHIO_MASKB, val) +#define bfin_read_PORTHIO_MASKB_CLEAR() bfin_read16(PORTHIO_MASKB_CLEAR) +#define bfin_write_PORTHIO_MASKB_CLEAR(val) bfin_write16(PORTHIO_MASKB_CLEAR, val) +#define bfin_read_PORTHIO_MASKB_SET() bfin_read16(PORTHIO_MASKB_SET) +#define bfin_write_PORTHIO_MASKB_SET(val) bfin_write16(PORTHIO_MASKB_SET, val) +#define bfin_read_PORTHIO_MASKB_TOGGLE() bfin_read16(PORTHIO_MASKB_TOGGLE) +#define bfin_write_PORTHIO_MASKB_TOGGLE(val) bfin_write16(PORTHIO_MASKB_TOGGLE, val) +#define bfin_read_PORTHIO_DIR() bfin_read16(PORTHIO_DIR) +#define bfin_write_PORTHIO_DIR(val) bfin_write16(PORTHIO_DIR, val) +#define bfin_read_PORTHIO_POLAR() bfin_read16(PORTHIO_POLAR) +#define bfin_write_PORTHIO_POLAR(val) bfin_write16(PORTHIO_POLAR, val) +#define bfin_read_PORTHIO_EDGE() bfin_read16(PORTHIO_EDGE) +#define bfin_write_PORTHIO_EDGE(val) bfin_write16(PORTHIO_EDGE, val) +#define bfin_read_PORTHIO_BOTH() bfin_read16(PORTHIO_BOTH) +#define bfin_write_PORTHIO_BOTH(val) bfin_write16(PORTHIO_BOTH, val) +#define bfin_read_PORTHIO_INEN() bfin_read16(PORTHIO_INEN) +#define bfin_write_PORTHIO_INEN(val) bfin_write16(PORTHIO_INEN, val) +#define bfin_read_UART1_THR() bfin_read16(UART1_THR) +#define bfin_write_UART1_THR(val) bfin_write16(UART1_THR, val) +#define bfin_read_UART1_RBR() bfin_read16(UART1_RBR) +#define bfin_write_UART1_RBR(val) bfin_write16(UART1_RBR, val) +#define bfin_read_UART1_DLL() bfin_read16(UART1_DLL) +#define bfin_write_UART1_DLL(val) bfin_write16(UART1_DLL, val) +#define bfin_read_UART1_IER() bfin_read16(UART1_IER) +#define bfin_write_UART1_IER(val) bfin_write16(UART1_IER, val) +#define bfin_read_UART1_DLH() bfin_read16(UART1_DLH) +#define bfin_write_UART1_DLH(val) bfin_write16(UART1_DLH, val) +#define bfin_read_UART1_IIR() bfin_read16(UART1_IIR) +#define bfin_write_UART1_IIR(val) bfin_write16(UART1_IIR, val) +#define bfin_read_UART1_LCR() bfin_read16(UART1_LCR) +#define bfin_write_UART1_LCR(val) bfin_write16(UART1_LCR, val) +#define bfin_read_UART1_MCR() bfin_read16(UART1_MCR) +#define bfin_write_UART1_MCR(val) bfin_write16(UART1_MCR, val) +#define bfin_read_UART1_LSR() bfin_read16(UART1_LSR) +#define bfin_write_UART1_LSR(val) bfin_write16(UART1_LSR, val) +#define bfin_read_UART1_MSR() bfin_read16(UART1_MSR) +#define bfin_write_UART1_MSR(val) bfin_write16(UART1_MSR, val) +#define bfin_read_UART1_SCR() bfin_read16(UART1_SCR) +#define bfin_write_UART1_SCR(val) bfin_write16(UART1_SCR, val) +#define bfin_read_UART1_GCTL() bfin_read16(UART1_GCTL) +#define bfin_write_UART1_GCTL(val) bfin_write16(UART1_GCTL, val) +#define bfin_read_PORTF_FER() bfin_read16(PORTF_FER) +#define bfin_write_PORTF_FER(val) bfin_write16(PORTF_FER, val) +#define bfin_read_PORTG_FER() bfin_read16(PORTG_FER) +#define bfin_write_PORTG_FER(val) bfin_write16(PORTG_FER, val) +#define bfin_read_PORTH_FER() bfin_read16(PORTH_FER) +#define bfin_write_PORTH_FER(val) bfin_write16(PORTH_FER, val) +#define bfin_read_HMDMA0_CONTROL() bfin_read16(HMDMA0_CONTROL) +#define bfin_write_HMDMA0_CONTROL(val) bfin_write16(HMDMA0_CONTROL, val) +#define bfin_read_HMDMA0_ECINIT() bfin_read16(HMDMA0_ECINIT) +#define bfin_write_HMDMA0_ECINIT(val) bfin_write16(HMDMA0_ECINIT, val) +#define bfin_read_HMDMA0_BCINIT() bfin_read16(HMDMA0_BCINIT) +#define bfin_write_HMDMA0_BCINIT(val) bfin_write16(HMDMA0_BCINIT, val) +#define bfin_read_HMDMA0_ECURGENT() bfin_read16(HMDMA0_ECURGENT) +#define bfin_write_HMDMA0_ECURGENT(val) bfin_write16(HMDMA0_ECURGENT, val) +#define bfin_read_HMDMA0_ECOVERFLOW() bfin_read16(HMDMA0_ECOVERFLOW) +#define bfin_write_HMDMA0_ECOVERFLOW(val) bfin_write16(HMDMA0_ECOVERFLOW, val) +#define bfin_read_HMDMA0_ECOUNT() bfin_read16(HMDMA0_ECOUNT) +#define bfin_write_HMDMA0_ECOUNT(val) bfin_write16(HMDMA0_ECOUNT, val) +#define bfin_read_HMDMA0_BCOUNT() bfin_read16(HMDMA0_BCOUNT) +#define bfin_write_HMDMA0_BCOUNT(val) bfin_write16(HMDMA0_BCOUNT, val) +#define bfin_read_HMDMA1_CONTROL() bfin_read16(HMDMA1_CONTROL) +#define bfin_write_HMDMA1_CONTROL(val) bfin_write16(HMDMA1_CONTROL, val) +#define bfin_read_HMDMA1_ECINIT() bfin_read16(HMDMA1_ECINIT) +#define bfin_write_HMDMA1_ECINIT(val) bfin_write16(HMDMA1_ECINIT, val) +#define bfin_read_HMDMA1_BCINIT() bfin_read16(HMDMA1_BCINIT) +#define bfin_write_HMDMA1_BCINIT(val) bfin_write16(HMDMA1_BCINIT, val) +#define bfin_read_HMDMA1_ECURGENT() bfin_read16(HMDMA1_ECURGENT) +#define bfin_write_HMDMA1_ECURGENT(val) bfin_write16(HMDMA1_ECURGENT, val) +#define bfin_read_HMDMA1_ECOVERFLOW() bfin_read16(HMDMA1_ECOVERFLOW) +#define bfin_write_HMDMA1_ECOVERFLOW(val) bfin_write16(HMDMA1_ECOVERFLOW, val) +#define bfin_read_HMDMA1_ECOUNT() bfin_read16(HMDMA1_ECOUNT) +#define bfin_write_HMDMA1_ECOUNT(val) bfin_write16(HMDMA1_ECOUNT, val) +#define bfin_read_HMDMA1_BCOUNT() bfin_read16(HMDMA1_BCOUNT) +#define bfin_write_HMDMA1_BCOUNT(val) bfin_write16(HMDMA1_BCOUNT, val) +#define bfin_read_PORTF_MUX() bfin_read16(PORTF_MUX) +#define bfin_write_PORTF_MUX(val) bfin_write16(PORTF_MUX, val) +#define bfin_read_PORTG_MUX() bfin_read16(PORTG_MUX) +#define bfin_write_PORTG_MUX(val) bfin_write16(PORTG_MUX, val) +#define bfin_read_PORTH_MUX() bfin_read16(PORTH_MUX) +#define bfin_write_PORTH_MUX(val) bfin_write16(PORTH_MUX, val) +#define bfin_read_PORTF_DRIVE() bfin_read16(PORTF_DRIVE) +#define bfin_write_PORTF_DRIVE(val) bfin_write16(PORTF_DRIVE, val) +#define bfin_read_PORTG_DRIVE() bfin_read16(PORTG_DRIVE) +#define bfin_write_PORTG_DRIVE(val) bfin_write16(PORTG_DRIVE, val) +#define bfin_read_PORTH_DRIVE() bfin_read16(PORTH_DRIVE) +#define bfin_write_PORTH_DRIVE(val) bfin_write16(PORTH_DRIVE, val) +#define bfin_read_PORTF_SLEW() bfin_read16(PORTF_SLEW) +#define bfin_write_PORTF_SLEW(val) bfin_write16(PORTF_SLEW, val) +#define bfin_read_PORTG_SLEW() bfin_read16(PORTG_SLEW) +#define bfin_write_PORTG_SLEW(val) bfin_write16(PORTG_SLEW, val) +#define bfin_read_PORTH_SLEW() bfin_read16(PORTH_SLEW) +#define bfin_write_PORTH_SLEW(val) bfin_write16(PORTH_SLEW, val) +#define bfin_read_PORTF_HYSTERESIS() bfin_read16(PORTF_HYSTERESIS) +#define bfin_write_PORTF_HYSTERESIS(val) bfin_write16(PORTF_HYSTERESIS, val) +#define bfin_read_PORTG_HYSTERESIS() bfin_read16(PORTG_HYSTERESIS) +#define bfin_write_PORTG_HYSTERESIS(val) bfin_write16(PORTG_HYSTERESIS, val) +#define bfin_read_PORTH_HYSTERESIS() bfin_read16(PORTH_HYSTERESIS) +#define bfin_write_PORTH_HYSTERESIS(val) bfin_write16(PORTH_HYSTERESIS, val) +#define bfin_read_NONGPIO_DRIVE() bfin_read16(NONGPIO_DRIVE) +#define bfin_write_NONGPIO_DRIVE(val) bfin_write16(NONGPIO_DRIVE, val) +#define bfin_read_NONGPIO_SLEW() bfin_read16(NONGPIO_SLEW) +#define bfin_write_NONGPIO_SLEW(val) bfin_write16(NONGPIO_SLEW, val) +#define bfin_read_NONGPIO_HYSTERESIS() bfin_read16(NONGPIO_HYSTERESIS) +#define bfin_write_NONGPIO_HYSTERESIS(val) bfin_write16(NONGPIO_HYSTERESIS, val) +#define bfin_read_HOST_CONTROL() bfin_read16(HOST_CONTROL) +#define bfin_write_HOST_CONTROL(val) bfin_write16(HOST_CONTROL, val) +#define bfin_read_HOST_STATUS() bfin_read16(HOST_STATUS) +#define bfin_write_HOST_STATUS(val) bfin_write16(HOST_STATUS, val) +#define bfin_read_HOST_TIMEOUT() bfin_read16(HOST_TIMEOUT) +#define bfin_write_HOST_TIMEOUT(val) bfin_write16(HOST_TIMEOUT, val) +#define bfin_read_CNT_CONFIG() bfin_read16(CNT_CONFIG) +#define bfin_write_CNT_CONFIG(val) bfin_write16(CNT_CONFIG, val) +#define bfin_read_CNT_IMASK() bfin_read16(CNT_IMASK) +#define bfin_write_CNT_IMASK(val) bfin_write16(CNT_IMASK, val) +#define bfin_read_CNT_STATUS() bfin_read16(CNT_STATUS) +#define bfin_write_CNT_STATUS(val) bfin_write16(CNT_STATUS, val) +#define bfin_read_CNT_COMMAND() bfin_read16(CNT_COMMAND) +#define bfin_write_CNT_COMMAND(val) bfin_write16(CNT_COMMAND, val) +#define bfin_read_CNT_DEBOUNCE() bfin_read16(CNT_DEBOUNCE) +#define bfin_write_CNT_DEBOUNCE(val) bfin_write16(CNT_DEBOUNCE, val) +#define bfin_read_CNT_COUNTER() bfin_read32(CNT_COUNTER) +#define bfin_write_CNT_COUNTER(val) bfin_write32(CNT_COUNTER, val) +#define bfin_read_CNT_MAX() bfin_read32(CNT_MAX) +#define bfin_write_CNT_MAX(val) bfin_write32(CNT_MAX, val) +#define bfin_read_CNT_MIN() bfin_read32(CNT_MIN) +#define bfin_write_CNT_MIN(val) bfin_write32(CNT_MIN, val) +#define bfin_read_OTP_CONTROL() bfin_read16(OTP_CONTROL) +#define bfin_write_OTP_CONTROL(val) bfin_write16(OTP_CONTROL, val) +#define bfin_read_OTP_BEN() bfin_read16(OTP_BEN) +#define bfin_write_OTP_BEN(val) bfin_write16(OTP_BEN, val) +#define bfin_read_OTP_STATUS() bfin_read16(OTP_STATUS) +#define bfin_write_OTP_STATUS(val) bfin_write16(OTP_STATUS, val) +#define bfin_read_OTP_TIMING() bfin_read32(OTP_TIMING) +#define bfin_write_OTP_TIMING(val) bfin_write32(OTP_TIMING, val) +#define bfin_read_SECURE_SYSSWT() bfin_read32(SECURE_SYSSWT) +#define bfin_write_SECURE_SYSSWT(val) bfin_write32(SECURE_SYSSWT, val) +#define bfin_read_SECURE_CONTROL() bfin_read16(SECURE_CONTROL) +#define bfin_write_SECURE_CONTROL(val) bfin_write16(SECURE_CONTROL, val) +#define bfin_read_SECURE_STATUS() bfin_read16(SECURE_STATUS) +#define bfin_write_SECURE_STATUS(val) bfin_write16(SECURE_STATUS, val) +#define bfin_read_OTP_DATA0() bfin_read32(OTP_DATA0) +#define bfin_write_OTP_DATA0(val) bfin_write32(OTP_DATA0, val) +#define bfin_read_OTP_DATA1() bfin_read32(OTP_DATA1) +#define bfin_write_OTP_DATA1(val) bfin_write32(OTP_DATA1, val) +#define bfin_read_OTP_DATA2() bfin_read32(OTP_DATA2) +#define bfin_write_OTP_DATA2(val) bfin_write32(OTP_DATA2, val) +#define bfin_read_OTP_DATA3() bfin_read32(OTP_DATA3) +#define bfin_write_OTP_DATA3(val) bfin_write32(OTP_DATA3, val) +#define bfin_read_NFC_CTL() bfin_read16(NFC_CTL) +#define bfin_write_NFC_CTL(val) bfin_write16(NFC_CTL, val) +#define bfin_read_NFC_STAT() bfin_read16(NFC_STAT) +#define bfin_write_NFC_STAT(val) bfin_write16(NFC_STAT, val) +#define bfin_read_NFC_IRQSTAT() bfin_read16(NFC_IRQSTAT) +#define bfin_write_NFC_IRQSTAT(val) bfin_write16(NFC_IRQSTAT, val) +#define bfin_read_NFC_IRQMASK() bfin_read16(NFC_IRQMASK) +#define bfin_write_NFC_IRQMASK(val) bfin_write16(NFC_IRQMASK, val) +#define bfin_read_NFC_ECC0() bfin_read16(NFC_ECC0) +#define bfin_write_NFC_ECC0(val) bfin_write16(NFC_ECC0, val) +#define bfin_read_NFC_ECC1() bfin_read16(NFC_ECC1) +#define bfin_write_NFC_ECC1(val) bfin_write16(NFC_ECC1, val) +#define bfin_read_NFC_ECC2() bfin_read16(NFC_ECC2) +#define bfin_write_NFC_ECC2(val) bfin_write16(NFC_ECC2, val) +#define bfin_read_NFC_ECC3() bfin_read16(NFC_ECC3) +#define bfin_write_NFC_ECC3(val) bfin_write16(NFC_ECC3, val) +#define bfin_read_NFC_COUNT() bfin_read16(NFC_COUNT) +#define bfin_write_NFC_COUNT(val) bfin_write16(NFC_COUNT, val) +#define bfin_read_NFC_RST() bfin_read16(NFC_RST) +#define bfin_write_NFC_RST(val) bfin_write16(NFC_RST, val) +#define bfin_read_NFC_PGCTL() bfin_read16(NFC_PGCTL) +#define bfin_write_NFC_PGCTL(val) bfin_write16(NFC_PGCTL, val) +#define bfin_read_NFC_READ() bfin_read16(NFC_READ) +#define bfin_write_NFC_READ(val) bfin_write16(NFC_READ, val) +#define bfin_read_NFC_ADDR() bfin_read16(NFC_ADDR) +#define bfin_write_NFC_ADDR(val) bfin_write16(NFC_ADDR, val) +#define bfin_read_NFC_CMD() bfin_read16(NFC_CMD) +#define bfin_write_NFC_CMD(val) bfin_write16(NFC_CMD, val) +#define bfin_read_NFC_DATA_WR() bfin_read16(NFC_DATA_WR) +#define bfin_write_NFC_DATA_WR(val) bfin_write16(NFC_DATA_WR, val) +#define bfin_read_NFC_DATA_RD() bfin_read16(NFC_DATA_RD) +#define bfin_write_NFC_DATA_RD(val) bfin_write16(NFC_DATA_RD, val) +#define bfin_read_DMA_TC_CNT() bfin_read16(DMA_TC_CNT) +#define bfin_write_DMA_TC_CNT(val) bfin_write16(DMA_TC_CNT, val) +#define bfin_read_DMA_TC_PER() bfin_read16(DMA_TC_PER) +#define bfin_write_DMA_TC_PER(val) bfin_write16(DMA_TC_PER, val) #endif /* __BFIN_CDEF_ADSP_BF522_proc__ */ diff --git a/arch/blackfin/include/asm/mach-bf527/BF522_def.h b/arch/blackfin/include/asm/mach-bf527/BF522_def.h index a6b0787..075c697 100644 --- a/arch/blackfin/include/asm/mach-bf527/BF522_def.h +++ b/arch/blackfin/include/asm/mach-bf527/BF522_def.h @@ -8,8 +8,6 @@ #include "../mach-common/ADSP-EDN-core_def.h" -#include "ADSP-EDN-BF52x-extended_def.h" - #define PLL_CTL 0xFFC00000 /* PLL Control Register */ #define PLL_DIV 0xFFC00004 /* PLL Divide Register */ #define VR_CTL 0xFFC00008 /* Voltage Regulator Control Register */ @@ -18,5 +16,498 @@ #define CHIPID 0xFFC00014 #define SWRST 0xFFC00100 /* Software Reset Register */ #define SYSCR 0xFFC00104 /* System Configuration register */ +#define SIC_RVECT 0xFFC00108 /* Interrupt Reset Vector Address Register */ +#define SIC_IMASK0 0xFFC0010C /* Interrupt Mask Register */ +#define SIC_IAR0 0xFFC00110 /* Interrupt Assignment Register 0 */ +#define SIC_IAR1 0xFFC00114 /* Interrupt Assignment Register 1 */ +#define SIC_IAR2 0xFFC00118 /* Interrupt Assignment Register 2 */ +#define SIC_IAR3 0xFFC0011C /* Interrupt Assignment Register 3 */ +#define SIC_ISR0 0xFFC00120 /* Interrupt Status Register */ +#define SIC_IWR0 0xFFC00124 /* Interrupt Wakeup Register */ +#define SIC_IMASK1 0xFFC0014C /* Interrupt Mask register of SIC2 */ +#define SIC_IAR4 0xFFC00150 /* Interrupt Assignment register4 */ +#define SIC_IAR5 0xFFC00154 /* Interrupt Assignment register5 */ +#define SIC_IAR6 0xFFC00158 /* Interrupt Assignment register6 */ +#define SIC_IAR7 0xFFC0015C /* Interrupt Assignment register7 */ +#define SIC_ISR1 0xFFC00160 /* Interrupt Status register */ +#define SIC_IWR1 0xFFC00164 /* Interrupt Wakeup register */ +#define WDOG_CTL 0xFFC00200 /* Watchdog Control Register */ +#define WDOG_CNT 0xFFC00204 /* Watchdog Count Register */ +#define WDOG_STAT 0xFFC00208 /* Watchdog Status Register */ +#define RTC_STAT 0xFFC00300 /* RTC Status Register */ +#define RTC_ICTL 0xFFC00304 /* RTC Interrupt Control Register */ +#define RTC_ISTAT 0xFFC00308 /* RTC Interrupt Status Register */ +#define RTC_SWCNT 0xFFC0030C /* RTC Stopwatch Count Register */ +#define RTC_ALARM 0xFFC00310 /* RTC Alarm Time Register */ +#define RTC_PREN 0xFFC00314 /* RTC Prescaler Enable Register */ +#define UART0_THR 0xFFC00400 /* Transmit Holding register */ +#define UART0_RBR 0xFFC00400 /* Receive Buffer register */ +#define UART0_DLL 0xFFC00400 /* Divisor Latch (Low-Byte) */ +#define UART0_IER 0xFFC00404 /* Interrupt Enable Register */ +#define UART0_DLH 0xFFC00404 /* Divisor Latch (High-Byte) */ +#define UART0_IIR 0xFFC00408 /* Interrupt Identification Register */ +#define UART0_LCR 0xFFC0040C /* Line Control Register */ +#define UART0_MCR 0xFFC00410 /* Modem Control Register */ +#define UART0_LSR 0xFFC00414 /* Line Status Register */ +#define UART0_MSR 0xFFC00418 /* Modem Status Register */ +#define UART0_SCR 0xFFC0041C /* SCR Scratch Register */ +#define UART0_GCTL 0xFFC00424 /* Global Control Register */ +#define SPI_CTL 0xFFC00500 /* SPI Control Register */ +#define SPI_FLG 0xFFC00504 /* SPI Flag register */ +#define SPI_STAT 0xFFC00508 /* SPI Status register */ +#define SPI_TDBR 0xFFC0050C /* SPI Transmit Data Buffer Register */ +#define SPI_RDBR 0xFFC00510 /* SPI Receive Data Buffer Register */ +#define SPI_BAUD 0xFFC00514 /* SPI Baud rate Register */ +#define SPI_SHADOW 0xFFC00518 /* SPI_RDBR Shadow Register */ +#define TIMER0_CONFIG 0xFFC00600 /* Timer 0 Configuration Register */ +#define TIMER0_COUNTER 0xFFC00604 /* Timer 0 Counter Register */ +#define TIMER0_PERIOD 0xFFC00608 /* Timer 0 Period Register */ +#define TIMER0_WIDTH 0xFFC0060C /* Timer 0 Width Register */ +#define TIMER1_CONFIG 0xFFC00610 /* Timer 1 Configuration Register */ +#define TIMER1_COUNTER 0xFFC00614 /* Timer 1 Counter Register */ +#define TIMER1_PERIOD 0xFFC00618 /* Timer 1 Period Register */ +#define TIMER1_WIDTH 0xFFC0061C /* Timer 1 Width Register */ +#define TIMER2_CONFIG 0xFFC00620 /* Timer 2 Configuration Register */ +#define TIMER2_COUNTER 0xFFC00624 /* Timer 2 Counter Register */ +#define TIMER2_PERIOD 0xFFC00628 /* Timer 2 Period Register */ +#define TIMER2_WIDTH 0xFFC0062C /* Timer 2 Width Register */ +#define TIMER3_CONFIG 0xFFC00630 /* Timer 3 Configuration Register */ +#define TIMER3_COUNTER 0xFFC00634 /* Timer 3 Counter Register */ +#define TIMER3_PERIOD 0xFFC00638 /* Timer 3 Period Register */ +#define TIMER3_WIDTH 0xFFC0063C /* Timer 3 Width Register */ +#define TIMER4_CONFIG 0xFFC00640 /* Timer 4 Configuration Register */ +#define TIMER4_COUNTER 0xFFC00644 /* Timer 4 Counter Register */ +#define TIMER4_PERIOD 0xFFC00648 /* Timer 4 Period Register */ +#define TIMER4_WIDTH 0xFFC0064C /* Timer 4 Width Register */ +#define TIMER5_CONFIG 0xFFC00650 /* Timer 5 Configuration Register */ +#define TIMER5_COUNTER 0xFFC00654 /* Timer 5 Counter Register */ +#define TIMER5_PERIOD 0xFFC00658 /* Timer 5 Period Register */ +#define TIMER5_WIDTH 0xFFC0065C /* Timer 5 Width Register */ +#define TIMER6_CONFIG 0xFFC00660 /* Timer 6 Configuration Register */ +#define TIMER6_COUNTER 0xFFC00664 /* Timer 6 Counter Register */ +#define TIMER6_PERIOD 0xFFC00668 /* Timer 6 Period Register */ +#define TIMER6_WIDTH 0xFFC0066C /* Timer 6 Width Register\n */ +#define TIMER7_CONFIG 0xFFC00670 /* Timer 7 Configuration Register */ +#define TIMER7_COUNTER 0xFFC00674 /* Timer 7 Counter Register */ +#define TIMER7_PERIOD 0xFFC00678 /* Timer 7 Period Register */ +#define TIMER7_WIDTH 0xFFC0067C /* Timer 7 Width Register */ +#define TIMER_ENABLE 0xFFC00680 /* Timer Enable Register */ +#define TIMER_DISABLE 0xFFC00684 /* Timer Disable Register */ +#define TIMER_STATUS 0xFFC00688 /* Timer Status Register */ +#define PORTFIO 0xFFC00700 /* Port F I/O Pin State Specify Register */ +#define PORTFIO_CLEAR 0xFFC00704 /* Port F I/O Peripheral Interrupt Clear Register */ +#define PORTFIO_SET 0xFFC00708 /* Port F I/O Peripheral Interrupt Set Register */ +#define PORTFIO_TOGGLE 0xFFC0070C /* Port F I/O Pin State Toggle Register */ +#define PORTFIO_MASKA 0xFFC00710 /* Port F I/O Mask State Specify Interrupt A Register */ +#define PORTFIO_MASKA_CLEAR 0xFFC00714 /* Port F I/O Mask Disable Interrupt A Register */ +#define PORTFIO_MASKA_SET 0xFFC00718 /* Port F I/O Mask Enable Interrupt A Register */ +#define PORTFIO_MASKA_TOGGLE 0xFFC0071C /* Port F I/O Mask Toggle Enable Interrupt A Register */ +#define PORTFIO_MASKB 0xFFC00720 /* Port F I/O Mask State Specify Interrupt B Register */ +#define PORTFIO_MASKB_CLEAR 0xFFC00724 /* Port F I/O Mask Disable Interrupt B Register */ +#define PORTFIO_MASKB_SET 0xFFC00728 /* Port F I/O Mask Enable Interrupt B Register */ +#define PORTFIO_MASKB_TOGGLE 0xFFC0072C /* Port F I/O Mask Toggle Enable Interrupt B Register */ +#define PORTFIO_DIR 0xFFC00730 /* Port F I/O Direction Register */ +#define PORTFIO_POLAR 0xFFC00734 /* Port F I/O Source Polarity Register */ +#define PORTFIO_EDGE 0xFFC00738 /* Port F I/O Source Sensitivity Register */ +#define PORTFIO_BOTH 0xFFC0073C /* Port F I/O Set on BOTH Edges Register */ +#define PORTFIO_INEN 0xFFC00740 /* Port F I/O Input Enable Register */ +#define SPORT0_TCR1 0xFFC00800 /* SPORT0 Transmit Configuration 1 Register */ +#define SPORT0_TCR2 0xFFC00804 /* SPORT0 Transmit Configuration 2 Register */ +#define SPORT0_TCLKDIV 0xFFC00808 /* SPORT0 Transmit Clock Divider */ +#define SPORT0_TFSDIV 0xFFC0080C /* SPORT0 Transmit Frame Sync Divider */ +#define SPORT0_TX 0xFFC00810 /* SPORT0 TX Data Register */ +#define SPORT0_RX 0xFFC00818 /* SPORT0 RX Data Register */ +#define SPORT0_RCR1 0xFFC00820 /* SPORT0 Transmit Configuration 1 Register */ +#define SPORT0_RCR2 0xFFC00824 /* SPORT0 Transmit Configuration 2 Register */ +#define SPORT0_RCLKDIV 0xFFC00828 /* SPORT0 Receive Clock Divider */ +#define SPORT0_RFSDIV 0xFFC0082C /* SPORT0 Receive Frame Sync Divider */ +#define SPORT0_STAT 0xFFC00830 /* SPORT0 Status Register */ +#define SPORT0_CHNL 0xFFC00834 /* SPORT0 Current Channel Register */ +#define SPORT0_MCMC1 0xFFC00838 /* SPORT0 Multi-Channel Configuration Register 1 */ +#define SPORT0_MCMC2 0xFFC0083C /* SPORT0 Multi-Channel Configuration Register 2 */ +#define SPORT0_MTCS0 0xFFC00840 /* SPORT0 Multi-Channel Transmit Select Register 0 */ +#define SPORT0_MTCS1 0xFFC00844 /* SPORT0 Multi-Channel Transmit Select Register 1 */ +#define SPORT0_MTCS2 0xFFC00848 /* SPORT0 Multi-Channel Transmit Select Register 2 */ +#define SPORT0_MTCS3 0xFFC0084C /* SPORT0 Multi-Channel Transmit Select Register 3 */ +#define SPORT0_MRCS0 0xFFC00850 /* SPORT0 Multi-Channel Receive Select Register 0 */ +#define SPORT0_MRCS1 0xFFC00854 /* SPORT0 Multi-Channel Receive Select Register 1 */ +#define SPORT0_MRCS2 0xFFC00858 /* SPORT0 Multi-Channel Receive Select Register 2 */ +#define SPORT0_MRCS3 0xFFC0085C /* SPORT0 Multi-Channel Receive Select Register 3 */ +#define SPORT1_TCR1 0xFFC00900 /* SPORT1 Transmit Configuration 1 Register */ +#define SPORT1_TCR2 0xFFC00904 /* SPORT1 Transmit Configuration 2 Register */ +#define SPORT1_TCLKDIV 0xFFC00908 /* SPORT1 Transmit Clock Divider */ +#define SPORT1_TFSDIV 0xFFC0090C /* SPORT1 Transmit Frame Sync Divider */ +#define SPORT1_TX 0xFFC00910 /* SPORT1 TX Data Register */ +#define SPORT1_RX 0xFFC00918 /* SPORT1 RX Data Register */ +#define SPORT1_RCR1 0xFFC00920 /* SPORT1 Transmit Configuration 1 Register */ +#define SPORT1_RCR2 0xFFC00924 /* SPORT1 Transmit Configuration 2 Register */ +#define SPORT1_RCLKDIV 0xFFC00928 /* SPORT1 Receive Clock Divider */ +#define SPORT1_RFSDIV 0xFFC0092C /* SPORT1 Receive Frame Sync Divider */ +#define SPORT1_STAT 0xFFC00930 /* SPORT1 Status Register */ +#define SPORT1_CHNL 0xFFC00934 /* SPORT1 Current Channel Register */ +#define SPORT1_MCMC1 0xFFC00938 /* SPORT1 Multi-Channel Configuration Register 1 */ +#define SPORT1_MCMC2 0xFFC0093C /* SPORT1 Multi-Channel Configuration Register 2 */ +#define SPORT1_MTCS0 0xFFC00940 /* SPORT1 Multi-Channel Transmit Select Register 0 */ +#define SPORT1_MTCS1 0xFFC00944 /* SPORT1 Multi-Channel Transmit Select Register 1 */ +#define SPORT1_MTCS2 0xFFC00948 /* SPORT1 Multi-Channel Transmit Select Register 2 */ +#define SPORT1_MTCS3 0xFFC0094C /* SPORT1 Multi-Channel Transmit Select Register 3 */ +#define SPORT1_MRCS0 0xFFC00950 /* SPORT1 Multi-Channel Receive Select Register 0 */ +#define SPORT1_MRCS1 0xFFC00954 /* SPORT1 Multi-Channel Receive Select Register 1 */ +#define SPORT1_MRCS2 0xFFC00958 /* SPORT1 Multi-Channel Receive Select Register 2 */ +#define SPORT1_MRCS3 0xFFC0095C /* SPORT1 Multi-Channel Receive Select Register 3 */ +#define EBIU_AMGCTL 0xFFC00A00 /* Asynchronous Memory Global Control Register */ +#define EBIU_AMBCTL0 0xFFC00A04 /* Asynchronous Memory Bank Control Register 0 */ +#define EBIU_AMBCTL1 0xFFC00A08 /* Asynchronous Memory Bank Control Register 1 */ +#define EBIU_SDGCTL 0xFFC00A10 /* SDRAM Global Control Register */ +#define EBIU_SDBCTL 0xFFC00A14 /* SDRAM Bank Control Register */ +#define EBIU_SDRRC 0xFFC00A18 /* SDRAM Refresh Rate Control Register */ +#define EBIU_SDSTAT 0xFFC00A1C /* SDRAM Status Register */ +#define DMA0_NEXT_DESC_PTR 0xFFC00C00 /* DMA Channel 0 Next Descriptor Pointer Register */ +#define DMA0_START_ADDR 0xFFC00C04 /* DMA Channel 0 Start Address Register */ +#define DMA0_CONFIG 0xFFC00C08 /* DMA Channel 0 Configuration Register */ +#define DMA0_X_COUNT 0xFFC00C10 /* DMA Channel 0 X Count Register */ +#define DMA0_X_MODIFY 0xFFC00C14 /* DMA Channel 0 X Modify Register */ +#define DMA0_Y_COUNT 0xFFC00C18 /* DMA Channel 0 Y Count Register */ +#define DMA0_Y_MODIFY 0xFFC00C1C /* DMA Channel 0 Y Modify Register */ +#define DMA0_CURR_DESC_PTR 0xFFC00C20 /* DMA Channel 0 Current Descriptor Pointer Register */ +#define DMA0_CURR_ADDR 0xFFC00C24 /* DMA Channel 0 Current Address Register */ +#define DMA0_IRQ_STATUS 0xFFC00C28 /* DMA Channel 0 Interrupt/Status Register */ +#define DMA0_PERIPHERAL_MAP 0xFFC00C2C /* DMA Channel 0 Peripheral Map Register */ +#define DMA0_CURR_X_COUNT 0xFFC00C30 /* DMA Channel 0 Current X Count Register */ +#define DMA0_CURR_Y_COUNT 0xFFC00C38 /* DMA Channel 0 Current Y Count Register */ +#define DMA1_NEXT_DESC_PTR 0xFFC00C40 /* DMA Channel 1 Next Descriptor Pointer Register */ +#define DMA1_START_ADDR 0xFFC00C44 /* DMA Channel 1 Start Address Register */ +#define DMA1_CONFIG 0xFFC00C48 /* DMA Channel 1 Configuration Register */ +#define DMA1_X_COUNT 0xFFC00C50 /* DMA Channel 1 X Count Register */ +#define DMA1_X_MODIFY 0xFFC00C54 /* DMA Channel 1 X Modify Register */ +#define DMA1_Y_COUNT 0xFFC00C58 /* DMA Channel 1 Y Count Register */ +#define DMA1_Y_MODIFY 0xFFC00C5C /* DMA Channel 1 Y Modify Register */ +#define DMA1_CURR_DESC_PTR 0xFFC00C60 /* DMA Channel 1 Current Descriptor Pointer Register */ +#define DMA1_CURR_ADDR 0xFFC00C64 /* DMA Channel 1 Current Address Register */ +#define DMA1_IRQ_STATUS 0xFFC00C68 /* DMA Channel 1 Interrupt/Status Register */ +#define DMA1_PERIPHERAL_MAP 0xFFC00C6C /* DMA Channel 1 Peripheral Map Register */ +#define DMA1_CURR_X_COUNT 0xFFC00C70 /* DMA Channel 1 Current X Count Register */ +#define DMA1_CURR_Y_COUNT 0xFFC00C78 /* DMA Channel 1 Current Y Count Register */ +#define DMA2_NEXT_DESC_PTR 0xFFC00C80 /* DMA Channel 2 Next Descriptor Pointer Register */ +#define DMA2_START_ADDR 0xFFC00C84 /* DMA Channel 2 Start Address Register */ +#define DMA2_CONFIG 0xFFC00C88 /* DMA Channel 2 Configuration Register */ +#define DMA2_X_COUNT 0xFFC00C90 /* DMA Channel 2 X Count Register */ +#define DMA2_X_MODIFY 0xFFC00C94 /* DMA Channel 2 X Modify Register */ +#define DMA2_Y_COUNT 0xFFC00C98 /* DMA Channel 2 Y Count Register */ +#define DMA2_Y_MODIFY 0xFFC00C9C /* DMA Channel 2 Y Modify Register */ +#define DMA2_CURR_DESC_PTR 0xFFC00CA0 /* DMA Channel 2 Current Descriptor Pointer Register */ +#define DMA2_CURR_ADDR 0xFFC00CA4 /* DMA Channel 2 Current Address Register */ +#define DMA2_IRQ_STATUS 0xFFC00CA8 /* DMA Channel 2 Interrupt/Status Register */ +#define DMA2_PERIPHERAL_MAP 0xFFC00CAC /* DMA Channel 2 Peripheral Map Register */ +#define DMA2_CURR_X_COUNT 0xFFC00CB0 /* DMA Channel 2 Current X Count Register */ +#define DMA2_CURR_Y_COUNT 0xFFC00CB8 /* DMA Channel 2 Current Y Count Register */ +#define DMA3_NEXT_DESC_PTR 0xFFC00CC0 /* DMA Channel 3 Next Descriptor Pointer Register */ +#define DMA3_START_ADDR 0xFFC00CC4 /* DMA Channel 3 Start Address Register */ +#define DMA3_CONFIG 0xFFC00CC8 /* DMA Channel 3 Configuration Register */ +#define DMA3_X_COUNT 0xFFC00CD0 /* DMA Channel 3 X Count Register */ +#define DMA3_X_MODIFY 0xFFC00CD4 /* DMA Channel 3 X Modify Register */ +#define DMA3_Y_COUNT 0xFFC00CD8 /* DMA Channel 3 Y Count Register */ +#define DMA3_Y_MODIFY 0xFFC00CDC /* DMA Channel 3 Y Modify Register */ +#define DMA3_CURR_DESC_PTR 0xFFC00CE0 /* DMA Channel 3 Current Descriptor Pointer Register */ +#define DMA3_CURR_ADDR 0xFFC00CE4 /* DMA Channel 3 Current Address Register */ +#define DMA3_IRQ_STATUS 0xFFC00CE8 /* DMA Channel 3 Interrupt/Status Register */ +#define DMA3_PERIPHERAL_MAP 0xFFC00CEC /* DMA Channel 3 Peripheral Map Register */ +#define DMA3_CURR_X_COUNT 0xFFC00CF0 /* DMA Channel 3 Current X Count Register */ +#define DMA3_CURR_Y_COUNT 0xFFC00CF8 /* DMA Channel 3 Current Y Count Register */ +#define DMA4_NEXT_DESC_PTR 0xFFC00D00 /* DMA Channel 4 Next Descriptor Pointer Register */ +#define DMA4_START_ADDR 0xFFC00D04 /* DMA Channel 4 Start Address Register */ +#define DMA4_CONFIG 0xFFC00D08 /* DMA Channel 4 Configuration Register */ +#define DMA4_X_COUNT 0xFFC00D10 /* DMA Channel 4 X Count Register */ +#define DMA4_X_MODIFY 0xFFC00D14 /* DMA Channel 4 X Modify Register */ +#define DMA4_Y_COUNT 0xFFC00D18 /* DMA Channel 4 Y Count Register */ +#define DMA4_Y_MODIFY 0xFFC00D1C /* DMA Channel 4 Y Modify Register */ +#define DMA4_CURR_DESC_PTR 0xFFC00D20 /* DMA Channel 4 Current Descriptor Pointer Register */ +#define DMA4_CURR_ADDR 0xFFC00D24 /* DMA Channel 4 Current Address Register */ +#define DMA4_IRQ_STATUS 0xFFC00D28 /* DMA Channel 4 Interrupt/Status Register */ +#define DMA4_PERIPHERAL_MAP 0xFFC00D2C /* DMA Channel 4 Peripheral Map Register */ +#define DMA4_CURR_X_COUNT 0xFFC00D30 /* DMA Channel 4 Current X Count Register */ +#define DMA4_CURR_Y_COUNT 0xFFC00D38 /* DMA Channel 4 Current Y Count Register */ +#define DMA5_NEXT_DESC_PTR 0xFFC00D40 /* DMA Channel 5 Next Descriptor Pointer Register */ +#define DMA5_START_ADDR 0xFFC00D44 /* DMA Channel 5 Start Address Register */ +#define DMA5_CONFIG 0xFFC00D48 /* DMA Channel 5 Configuration Register */ +#define DMA5_X_COUNT 0xFFC00D50 /* DMA Channel 5 X Count Register */ +#define DMA5_X_MODIFY 0xFFC00D54 /* DMA Channel 5 X Modify Register */ +#define DMA5_Y_COUNT 0xFFC00D58 /* DMA Channel 5 Y Count Register */ +#define DMA5_Y_MODIFY 0xFFC00D5C /* DMA Channel 5 Y Modify Register */ +#define DMA5_CURR_DESC_PTR 0xFFC00D60 /* DMA Channel 5 Current Descriptor Pointer Register */ +#define DMA5_CURR_ADDR 0xFFC00D64 /* DMA Channel 5 Current Address Register */ +#define DMA5_IRQ_STATUS 0xFFC00D68 /* DMA Channel 5 Interrupt/Status Register */ +#define DMA5_PERIPHERAL_MAP 0xFFC00D6C /* DMA Channel 5 Peripheral Map Register */ +#define DMA5_CURR_X_COUNT 0xFFC00D70 /* DMA Channel 5 Current X Count Register */ +#define DMA5_CURR_Y_COUNT 0xFFC00D78 /* DMA Channel 5 Current Y Count Register */ +#define DMA6_NEXT_DESC_PTR 0xFFC00D80 /* DMA Channel 6 Next Descriptor Pointer Register */ +#define DMA6_START_ADDR 0xFFC00D84 /* DMA Channel 6 Start Address Register */ +#define DMA6_CONFIG 0xFFC00D88 /* DMA Channel 6 Configuration Register */ +#define DMA6_X_COUNT 0xFFC00D90 /* DMA Channel 6 X Count Register */ +#define DMA6_X_MODIFY 0xFFC00D94 /* DMA Channel 6 X Modify Register */ +#define DMA6_Y_COUNT 0xFFC00D98 /* DMA Channel 6 Y Count Register */ +#define DMA6_Y_MODIFY 0xFFC00D9C /* DMA Channel 6 Y Modify Register */ +#define DMA6_CURR_DESC_PTR 0xFFC00DA0 /* DMA Channel 6 Current Descriptor Pointer Register */ +#define DMA6_CURR_ADDR 0xFFC00DA4 /* DMA Channel 6 Current Address Register */ +#define DMA6_IRQ_STATUS 0xFFC00DA8 /* DMA Channel 6 Interrupt/Status Register */ +#define DMA6_PERIPHERAL_MAP 0xFFC00DAC /* DMA Channel 6 Peripheral Map Register */ +#define DMA6_CURR_X_COUNT 0xFFC00DB0 /* DMA Channel 6 Current X Count Register */ +#define DMA6_CURR_Y_COUNT 0xFFC00DB8 /* DMA Channel 6 Current Y Count Register */ +#define DMA7_NEXT_DESC_PTR 0xFFC00DC0 /* DMA Channel 7 Next Descriptor Pointer Register */ +#define DMA7_START_ADDR 0xFFC00DC4 /* DMA Channel 7 Start Address Register */ +#define DMA7_CONFIG 0xFFC00DC8 /* DMA Channel 7 Configuration Register */ +#define DMA7_X_COUNT 0xFFC00DD0 /* DMA Channel 7 X Count Register */ +#define DMA7_X_MODIFY 0xFFC00DD4 /* DMA Channel 7 X Modify Register */ +#define DMA7_Y_COUNT 0xFFC00DD8 /* DMA Channel 7 Y Count Register */ +#define DMA7_Y_MODIFY 0xFFC00DDC /* DMA Channel 7 Y Modify Register */ +#define DMA7_CURR_DESC_PTR 0xFFC00DE0 /* DMA Channel 7 Current Descriptor Pointer Register */ +#define DMA7_CURR_ADDR 0xFFC00DE4 /* DMA Channel 7 Current Address Register */ +#define DMA7_IRQ_STATUS 0xFFC00DE8 /* DMA Channel 7 Interrupt/Status Register */ +#define DMA7_PERIPHERAL_MAP 0xFFC00DEC /* DMA Channel 7 Peripheral Map Register */ +#define DMA7_CURR_X_COUNT 0xFFC00DF0 /* DMA Channel 7 Current X Count Register */ +#define DMA7_CURR_Y_COUNT 0xFFC00DF8 /* DMA Channel 7 Current Y Count Register */ +#define DMA8_NEXT_DESC_PTR 0xFFC00E00 /* DMA Channel 8 Next Descriptor Pointer Register */ +#define DMA8_START_ADDR 0xFFC00E04 /* DMA Channel 8 Start Address Register */ +#define DMA8_CONFIG 0xFFC00E08 /* DMA Channel 8 Configuration Register */ +#define DMA8_X_COUNT 0xFFC00E10 /* DMA Channel 8 X Count Register */ +#define DMA8_X_MODIFY 0xFFC00E14 /* DMA Channel 8 X Modify Register */ +#define DMA8_Y_COUNT 0xFFC00E18 /* DMA Channel 8 Y Count Register */ +#define DMA8_Y_MODIFY 0xFFC00E1C /* DMA Channel 8 Y Modify Register */ +#define DMA8_CURR_DESC_PTR 0xFFC00E20 /* DMA Channel 8 Current Descriptor Pointer Register */ +#define DMA8_CURR_ADDR 0xFFC00E24 /* DMA Channel 8 Current Address Register */ +#define DMA8_IRQ_STATUS 0xFFC00E28 /* DMA Channel 8 Interrupt/Status Register */ +#define DMA8_PERIPHERAL_MAP 0xFFC00E2C /* DMA Channel 8 Peripheral Map Register */ +#define DMA8_CURR_X_COUNT 0xFFC00E30 /* DMA Channel 8 Current X Count Register */ +#define DMA8_CURR_Y_COUNT 0xFFC00E38 /* DMA Channel 8 Current Y Count Register */ +#define DMA9_NEXT_DESC_PTR 0xFFC00E40 /* DMA Channel 9 Next Descriptor Pointer Register */ +#define DMA9_START_ADDR 0xFFC00E44 /* DMA Channel 9 Start Address Register */ +#define DMA9_CONFIG 0xFFC00E48 /* DMA Channel 9 Configuration Register */ +#define DMA9_X_COUNT 0xFFC00E50 /* DMA Channel 9 X Count Register */ +#define DMA9_X_MODIFY 0xFFC00E54 /* DMA Channel 9 X Modify Register */ +#define DMA9_Y_COUNT 0xFFC00E58 /* DMA Channel 9 Y Count Register */ +#define DMA9_Y_MODIFY 0xFFC00E5C /* DMA Channel 9 Y Modify Register */ +#define DMA9_CURR_DESC_PTR 0xFFC00E60 /* DMA Channel 9 Current Descriptor Pointer Register */ +#define DMA9_CURR_ADDR 0xFFC00E64 /* DMA Channel 9 Current Address Register */ +#define DMA9_IRQ_STATUS 0xFFC00E68 /* DMA Channel 9 Interrupt/Status Register */ +#define DMA9_PERIPHERAL_MAP 0xFFC00E6C /* DMA Channel 9 Peripheral Map Register */ +#define DMA9_CURR_X_COUNT 0xFFC00E70 /* DMA Channel 9 Current X Count Register */ +#define DMA9_CURR_Y_COUNT 0xFFC00E78 /* DMA Channel 9 Current Y Count Register */ +#define DMA10_NEXT_DESC_PTR 0xFFC00E80 /* DMA Channel 10 Next Descriptor Pointer Register */ +#define DMA10_START_ADDR 0xFFC00E84 /* DMA Channel 10 Start Address Register */ +#define DMA10_CONFIG 0xFFC00E88 /* DMA Channel 10 Configuration Register */ +#define DMA10_X_COUNT 0xFFC00E90 /* DMA Channel 10 X Count Register */ +#define DMA10_X_MODIFY 0xFFC00E94 /* DMA Channel 10 X Modify Register */ +#define DMA10_Y_COUNT 0xFFC00E98 /* DMA Channel 10 Y Count Register */ +#define DMA10_Y_MODIFY 0xFFC00E9C /* DMA Channel 10 Y Modify Register */ +#define DMA10_CURR_DESC_PTR 0xFFC00EA0 /* DMA Channel 10 Current Descriptor Pointer Register */ +#define DMA10_CURR_ADDR 0xFFC00EA4 /* DMA Channel 10 Current Address Register */ +#define DMA10_IRQ_STATUS 0xFFC00EA8 /* DMA Channel 10 Interrupt/Status Register */ +#define DMA10_PERIPHERAL_MAP 0xFFC00EAC /* DMA Channel 10 Peripheral Map Register */ +#define DMA10_CURR_X_COUNT 0xFFC00EB0 /* DMA Channel 10 Current X Count Register */ +#define DMA10_CURR_Y_COUNT 0xFFC00EB8 /* DMA Channel 10 Current Y Count Register */ +#define DMA11_NEXT_DESC_PTR 0xFFC00EC0 /* DMA Channel 11 Next Descriptor Pointer Register */ +#define DMA11_START_ADDR 0xFFC00EC4 /* DMA Channel 11 Start Address Register */ +#define DMA11_CONFIG 0xFFC00EC8 /* DMA Channel 11 Configuration Register */ +#define DMA11_X_COUNT 0xFFC00ED0 /* DMA Channel 11 X Count Register */ +#define DMA11_X_MODIFY 0xFFC00ED4 /* DMA Channel 11 X Modify Register */ +#define DMA11_Y_COUNT 0xFFC00ED8 /* DMA Channel 11 Y Count Register */ +#define DMA11_Y_MODIFY 0xFFC00EDC /* DMA Channel 11 Y Modify Register */ +#define DMA11_CURR_DESC_PTR 0xFFC00EE0 /* DMA Channel 11 Current Descriptor Pointer Register */ +#define DMA11_CURR_ADDR 0xFFC00EE4 /* DMA Channel 11 Current Address Register */ +#define DMA11_IRQ_STATUS 0xFFC00EE8 /* DMA Channel 11 Interrupt/Status Register */ +#define DMA11_PERIPHERAL_MAP 0xFFC00EEC /* DMA Channel 11 Peripheral Map Register */ +#define DMA11_CURR_X_COUNT 0xFFC00EF0 /* DMA Channel 11 Current X Count Register */ +#define DMA11_CURR_Y_COUNT 0xFFC00EF8 /* DMA Channel 11 Current Y Count Register */ +#define MDMA_S0_NEXT_DESC_PTR 0xFFC00F40 /* MemDMA Stream 0 Source Next Descriptor Pointer Register */ +#define MDMA_S0_START_ADDR 0xFFC00F44 /* MemDMA Stream 0 Source Start Address Register */ +#define MDMA_S0_CONFIG 0xFFC00F48 /* MemDMA Stream 0 Source Configuration Register */ +#define MDMA_S0_X_COUNT 0xFFC00F50 /* MemDMA Stream 0 Source X Count Register */ +#define MDMA_S0_X_MODIFY 0xFFC00F54 /* MemDMA Stream 0 Source X Modify Register */ +#define MDMA_S0_Y_COUNT 0xFFC00F58 /* MemDMA Stream 0 Source Y Count Register */ +#define MDMA_S0_Y_MODIFY 0xFFC00F5C /* MemDMA Stream 0 Source Y Modify Register */ +#define MDMA_S0_CURR_DESC_PTR 0xFFC00F60 /* MemDMA Stream 0 Source Current Descriptor Pointer Register */ +#define MDMA_S0_CURR_ADDR 0xFFC00F64 /* MemDMA Stream 0 Source Current Address Register */ +#define MDMA_S0_IRQ_STATUS 0xFFC00F68 /* MemDMA Stream 0 Source Interrupt/Status Register */ +#define MDMA_S0_PERIPHERAL_MAP 0xFFC00F6C /* MemDMA Stream 0 Source Peripheral Map Register */ +#define MDMA_S0_CURR_X_COUNT 0xFFC00F70 /* MemDMA Stream 0 Source Current X Count Register */ +#define MDMA_S0_CURR_Y_COUNT 0xFFC00F78 /* MemDMA Stream 0 Source Current Y Count Register */ +#define MDMA_D0_NEXT_DESC_PTR 0xFFC00F00 /* MemDMA Stream 0 Destination Next Descriptor Pointer Register */ +#define MDMA_D0_START_ADDR 0xFFC00F04 /* MemDMA Stream 0 Destination Start Address Register */ +#define MDMA_D0_CONFIG 0xFFC00F08 /* MemDMA Stream 0 Destination Configuration Register */ +#define MDMA_D0_X_COUNT 0xFFC00F10 /* MemDMA Stream 0 Destination X Count Register */ +#define MDMA_D0_X_MODIFY 0xFFC00F14 /* MemDMA Stream 0 Destination X Modify Register */ +#define MDMA_D0_Y_COUNT 0xFFC00F18 /* MemDMA Stream 0 Destination Y Count Register */ +#define MDMA_D0_Y_MODIFY 0xFFC00F1C /* MemDMA Stream 0 Destination Y Modify Register */ +#define MDMA_D0_CURR_DESC_PTR 0xFFC00F20 /* MemDMA Stream 0 Destination Current Descriptor Pointer Register */ +#define MDMA_D0_CURR_ADDR 0xFFC00F24 /* MemDMA Stream 0 Destination Current Address Register */ +#define MDMA_D0_IRQ_STATUS 0xFFC00F28 /* MemDMA Stream 0 Destination Interrupt/Status Register */ +#define MDMA_D0_PERIPHERAL_MAP 0xFFC00F2C /* MemDMA Stream 0 Destination Peripheral Map Register */ +#define MDMA_D0_CURR_X_COUNT 0xFFC00F30 /* MemDMA Stream 0 Destination Current X Count Register */ +#define MDMA_D0_CURR_Y_COUNT 0xFFC00F38 /* MemDMA Stream 0 Destination Current Y Count Register */ +#define MDMA_S1_NEXT_DESC_PTR 0xFFC00FC0 /* MemDMA Stream 1 Source Next Descriptor Pointer Register */ +#define MDMA_S1_START_ADDR 0xFFC00FC4 /* MemDMA Stream 1 Source Start Address Register */ +#define MDMA_S1_CONFIG 0xFFC00FC8 /* MemDMA Stream 1 Source Configuration Register */ +#define MDMA_S1_X_COUNT 0xFFC00FD0 /* MemDMA Stream 1 Source X Count Register */ +#define MDMA_S1_X_MODIFY 0xFFC00FD4 /* MemDMA Stream 1 Source X Modify Register */ +#define MDMA_S1_Y_COUNT 0xFFC00FD8 /* MemDMA Stream 1 Source Y Count Register */ +#define MDMA_S1_Y_MODIFY 0xFFC00FDC /* MemDMA Stream 1 Source Y Modify Register */ +#define MDMA_S1_CURR_DESC_PTR 0xFFC00FE0 /* MemDMA Stream 1 Source Current Descriptor Pointer Register */ +#define MDMA_S1_CURR_ADDR 0xFFC00FE4 /* MemDMA Stream 1 Source Current Address Register */ +#define MDMA_S1_IRQ_STATUS 0xFFC00FE8 /* MemDMA Stream 1 Source Interrupt/Status Register */ +#define MDMA_S1_PERIPHERAL_MAP 0xFFC00FEC /* MemDMA Stream 1 Source Peripheral Map Register */ +#define MDMA_S1_CURR_X_COUNT 0xFFC00FF0 /* MemDMA Stream 1 Source Current X Count Register */ +#define MDMA_S1_CURR_Y_COUNT 0xFFC00FF8 /* MemDMA Stream 1 Source Current Y Count Register */ +#define MDMA_D1_NEXT_DESC_PTR 0xFFC00F80 /* MemDMA Stream 1 Destination Next Descriptor Pointer Register */ +#define MDMA_D1_START_ADDR 0xFFC00F84 /* MemDMA Stream 1 Destination Start Address Register */ +#define MDMA_D1_CONFIG 0xFFC00F88 /* MemDMA Stream 1 Destination Configuration Register */ +#define MDMA_D1_X_COUNT 0xFFC00F90 /* MemDMA Stream 1 Destination X Count Register */ +#define MDMA_D1_X_MODIFY 0xFFC00F94 /* MemDMA Stream 1 Destination X Modify Register */ +#define MDMA_D1_Y_COUNT 0xFFC00F98 /* MemDMA Stream 1 Destination Y Count Register */ +#define MDMA_D1_Y_MODIFY 0xFFC00F9C /* MemDMA Stream 1 Destination Y Modify Register */ +#define MDMA_D1_CURR_DESC_PTR 0xFFC00FA0 /* MemDMA Stream 1 Destination Current Descriptor Pointer Register */ +#define MDMA_D1_CURR_ADDR 0xFFC00FA4 /* MemDMA Stream 1 Destination Current Address Register */ +#define MDMA_D1_IRQ_STATUS 0xFFC00FA8 /* MemDMA Stream 1 Destination Interrupt/Status Register */ +#define MDMA_D1_PERIPHERAL_MAP 0xFFC00FAC /* MemDMA Stream 1 Destination Peripheral Map Register */ +#define MDMA_D1_CURR_X_COUNT 0xFFC00FB0 /* MemDMA Stream 1 Destination Current X Count Register */ +#define MDMA_D1_CURR_Y_COUNT 0xFFC00FB8 /* MemDMA Stream 1 Destination Current Y Count Register */ +#define PPI_CONTROL 0xFFC01000 /* PPI Control Register */ +#define PPI_STATUS 0xFFC01004 /* PPI Status Register */ +#define PPI_COUNT 0xFFC01008 /* PPI Transfer Count Register */ +#define PPI_DELAY 0xFFC0100C /* PPI Delay Count Register */ +#define PPI_FRAME 0xFFC01010 /* PPI Frame Length Register */ +#define TWI_CLKDIV 0xFFC01400 /* Serial Clock Divider Register */ +#define TWI_CONTROL 0xFFC01404 /* TWI Control Register */ +#define TWI_SLAVE_CTL 0xFFC01408 /* Slave Mode Control Register */ +#define TWI_SLAVE_STAT 0xFFC0140C /* Slave Mode Status Register */ +#define TWI_SLAVE_ADDR 0xFFC01410 /* Slave Mode Address Register */ +#define TWI_MASTER_CTL 0xFFC01414 /* Master Mode Control Register */ +#define TWI_MASTER_STAT 0xFFC01418 /* Master Mode Status Register */ +#define TWI_MASTER_ADDR 0xFFC0141C /* Master Mode Address Register */ +#define TWI_INT_STAT 0xFFC01420 /* TWI Interrupt Status Register */ +#define TWI_INT_MASK 0xFFC01424 /* TWI Master Interrupt Mask Register */ +#define TWI_FIFO_CTL 0xFFC01428 /* FIFO Control Register */ +#define TWI_FIFO_STAT 0xFFC0142C /* FIFO Status Register */ +#define TWI_XMT_DATA8 0xFFC01480 /* FIFO Transmit Data Single Byte Register */ +#define TWI_XMT_DATA16 0xFFC01484 /* FIFO Transmit Data Double Byte Register */ +#define TWI_RCV_DATA8 0xFFC01488 /* FIFO Receive Data Single Byte Register */ +#define TWI_RCV_DATA16 0xFFC0148C /* FIFO Receive Data Double Byte Register */ +#define PORTGIO 0xFFC01500 /* Port G I/O Pin State Specify Register */ +#define PORTGIO_CLEAR 0xFFC01504 /* Port G I/O Peripheral Interrupt Clear Register */ +#define PORTGIO_SET 0xFFC01508 /* Port G I/O Peripheral Interrupt Set Register */ +#define PORTGIO_TOGGLE 0xFFC0150C /* Port G I/O Pin State Toggle Register */ +#define PORTGIO_MASKA 0xFFC01510 /* Port G I/O Mask State Specify Interrupt A Register */ +#define PORTGIO_MASKA_CLEAR 0xFFC01514 /* Port G I/O Mask Disable Interrupt A Register */ +#define PORTGIO_MASKA_SET 0xFFC01518 /* Port G I/O Mask Enable Interrupt A Register */ +#define PORTGIO_MASKA_TOGGLE 0xFFC0151C /* Port G I/O Mask Toggle Enable Interrupt A Register */ +#define PORTGIO_MASKB 0xFFC01520 /* Port G I/O Mask State Specify Interrupt B Register */ +#define PORTGIO_MASKB_CLEAR 0xFFC01524 /* Port G I/O Mask Disable Interrupt B Register */ +#define PORTGIO_MASKB_SET 0xFFC01528 /* Port G I/O Mask Enable Interrupt B Register */ +#define PORTGIO_MASKB_TOGGLE 0xFFC0152C /* Port G I/O Mask Toggle Enable Interrupt B Register */ +#define PORTGIO_DIR 0xFFC01530 /* Port G I/O Direction Register */ +#define PORTGIO_POLAR 0xFFC01534 /* Port G I/O Source Polarity Register */ +#define PORTGIO_EDGE 0xFFC01538 /* Port G I/O Source Sensitivity Register */ +#define PORTGIO_BOTH 0xFFC0153C /* Port G I/O Set on BOTH Edges Register */ +#define PORTGIO_INEN 0xFFC01540 /* Port G I/O Input Enable Register */ +#define PORTHIO 0xFFC01700 /* Port H I/O Pin State Specify Register */ +#define PORTHIO_CLEAR 0xFFC01704 /* Port H I/O Peripheral Interrupt Clear Register */ +#define PORTHIO_SET 0xFFC01708 /* Port H I/O Peripheral Interrupt Set Register */ +#define PORTHIO_TOGGLE 0xFFC0170C /* Port H I/O Pin State Toggle Register */ +#define PORTHIO_MASKA 0xFFC01710 /* Port H I/O Mask State Specify Interrupt A Register */ +#define PORTHIO_MASKA_CLEAR 0xFFC01714 /* Port H I/O Mask Disable Interrupt A Register */ +#define PORTHIO_MASKA_SET 0xFFC01718 /* Port H I/O Mask Enable Interrupt A Register */ +#define PORTHIO_MASKA_TOGGLE 0xFFC0171C /* Port H I/O Mask Toggle Enable Interrupt A Register */ +#define PORTHIO_MASKB 0xFFC01720 /* Port H I/O Mask State Specify Interrupt B Register */ +#define PORTHIO_MASKB_CLEAR 0xFFC01724 /* Port H I/O Mask Disable Interrupt B Register */ +#define PORTHIO_MASKB_SET 0xFFC01728 /* Port H I/O Mask Enable Interrupt B Register */ +#define PORTHIO_MASKB_TOGGLE 0xFFC0172C /* Port H I/O Mask Toggle Enable Interrupt B Register */ +#define PORTHIO_DIR 0xFFC01730 /* Port H I/O Direction Register */ +#define PORTHIO_POLAR 0xFFC01734 /* Port H I/O Source Polarity Register */ +#define PORTHIO_EDGE 0xFFC01738 /* Port H I/O Source Sensitivity Register */ +#define PORTHIO_BOTH 0xFFC0173C /* Port H I/O Set on BOTH Edges Register */ +#define PORTHIO_INEN 0xFFC01740 /* Port H I/O Input Enable Register */ +#define UART1_THR 0xFFC02000 /* Transmit Holding register */ +#define UART1_RBR 0xFFC02000 /* Receive Buffer register */ +#define UART1_DLL 0xFFC02000 /* Divisor Latch (Low-Byte) */ +#define UART1_IER 0xFFC02004 /* Interrupt Enable Register */ +#define UART1_DLH 0xFFC02004 /* Divisor Latch (High-Byte) */ +#define UART1_IIR 0xFFC02008 /* Interrupt Identification Register */ +#define UART1_LCR 0xFFC0200C /* Line Control Register */ +#define UART1_MCR 0xFFC02010 /* Modem Control Register */ +#define UART1_LSR 0xFFC02014 /* Line Status Register */ +#define UART1_MSR 0xFFC02018 /* Modem Status Register */ +#define UART1_SCR 0xFFC0201C /* SCR Scratch Register */ +#define UART1_GCTL 0xFFC02024 /* Global Control Register */ +#define PORTF_FER 0xFFC03200 /* Port F Function Enable Register (Alternate/Flag*) */ +#define PORTG_FER 0xFFC03204 /* Port G Function Enable Register (Alternate/Flag*) */ +#define PORTH_FER 0xFFC03208 /* Port H Function Enable Register (Alternate/Flag*) */ +#define HMDMA0_CONTROL 0xFFC03300 /* Handshake MDMA0 Control Register */ +#define HMDMA0_ECINIT 0xFFC03304 /* HMDMA0 Initial Edge Count Register */ +#define HMDMA0_BCINIT 0xFFC03308 /* HMDMA0 Initial Block Count Register */ +#define HMDMA0_ECURGENT 0xFFC0330C /* HMDMA0 Urgent Edge Count Threshhold Register */ +#define HMDMA0_ECOVERFLOW 0xFFC03310 /* HMDMA0 Edge Count Overflow Interrupt Register */ +#define HMDMA0_ECOUNT 0xFFC03314 /* HMDMA0 Current Edge Count Register */ +#define HMDMA0_BCOUNT 0xFFC03318 /* HMDMA0 Current Block Count Register */ +#define HMDMA1_CONTROL 0xFFC03340 /* Handshake MDMA1 Control Register */ +#define HMDMA1_ECINIT 0xFFC03344 /* HMDMA1 Initial Edge Count Register */ +#define HMDMA1_BCINIT 0xFFC03348 /* HMDMA1 Initial Block Count Register */ +#define HMDMA1_ECURGENT 0xFFC0334C /* HMDMA1 Urgent Edge Count Threshhold Register */ +#define HMDMA1_ECOVERFLOW 0xFFC03350 /* HMDMA1 Edge Count Overflow Interrupt Register */ +#define HMDMA1_ECOUNT 0xFFC03354 /* HMDMA1 Current Edge Count Register */ +#define HMDMA1_BCOUNT 0xFFC03358 /* HMDMA1 Current Block Count Register */ +#define PORTF_MUX 0xFFC03210 /* Port F mux control */ +#define PORTG_MUX 0xFFC03214 /* Port G mux control */ +#define PORTH_MUX 0xFFC03218 /* Port H mux control */ +#define PORTF_DRIVE 0xFFC03220 /* Port F drive strength control */ +#define PORTG_DRIVE 0xFFC03224 /* Port G drive strength control */ +#define PORTH_DRIVE 0xFFC03228 /* Port H drive strength control */ +#define PORTF_SLEW 0xFFC03230 /* Port F slew control */ +#define PORTG_SLEW 0xFFC03234 /* Port G slew control */ +#define PORTH_SLEW 0xFFC03238 /* Port H slew control */ +#define PORTF_HYSTERESIS 0xFFC03240 /* Port F Schmitt trigger control */ +#define PORTG_HYSTERESIS 0xFFC03244 /* Port G Schmitt trigger control */ +#define PORTH_HYSTERESIS 0xFFC03248 /* Port H Schmitt trigger control */ +#define NONGPIO_DRIVE 0xFFC03280 /* Non-GPIO Port drive strength control */ +#define NONGPIO_SLEW 0xFFC03284 /* Non-GPIO Port slew control */ +#define NONGPIO_HYSTERESIS 0xFFC03288 /* Non-GPIO Port Schmitt trigger control */ +#define HOST_CONTROL 0xFFC03400 /* HOST Control Register */ +#define HOST_STATUS 0xFFC03404 /* HOST Status Register */ +#define HOST_TIMEOUT 0xFFC03408 /* HOST Acknowledge Mode Timeout Register */ +#define CNT_CONFIG 0xFFC03500 /* Configuration/Control Register */ +#define CNT_IMASK 0xFFC03504 /* Interrupt Mask Register */ +#define CNT_STATUS 0xFFC03508 /* Status Register */ +#define CNT_COMMAND 0xFFC0350C /* Command Register */ +#define CNT_DEBOUNCE 0xFFC03510 /* Debounce Prescaler Register */ +#define CNT_COUNTER 0xFFC03514 /* Counter Register */ +#define CNT_MAX 0xFFC03518 /* Maximal Count Boundary Value Register */ +#define CNT_MIN 0xFFC0351C /* Minimal Count Boundary Value Register */ +#define OTP_CONTROL 0xFFC03600 /* OTP/Fuse Control Register */ +#define OTP_BEN 0xFFC03604 /* OTP/Fuse Byte Enable */ +#define OTP_STATUS 0xFFC03608 /* OTP/Fuse Status */ +#define OTP_TIMING 0xFFC0360C /* OTP/Fuse Access Timing */ +#define SECURE_SYSSWT 0xFFC03620 /* Secure System Switches */ +#define SECURE_CONTROL 0xFFC03624 /* Secure Control */ +#define SECURE_STATUS 0xFFC03628 /* Secure Status */ +#define OTP_DATA0 0xFFC03680 /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */ +#define OTP_DATA1 0xFFC03684 /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */ +#define OTP_DATA2 0xFFC03688 /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */ +#define OTP_DATA3 0xFFC0368C /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */ +#define NFC_CTL 0xFFC03700 /* NAND Control Register */ +#define NFC_STAT 0xFFC03704 /* NAND Status Register */ +#define NFC_IRQSTAT 0xFFC03708 /* NAND Interrupt Status Register */ +#define NFC_IRQMASK 0xFFC0370C /* NAND Interrupt Mask Register */ +#define NFC_ECC0 0xFFC03710 /* NAND ECC Register 0 */ +#define NFC_ECC1 0xFFC03714 /* NAND ECC Register 1 */ +#define NFC_ECC2 0xFFC03718 /* NAND ECC Register 2 */ +#define NFC_ECC3 0xFFC0371C /* NAND ECC Register 3 */ +#define NFC_COUNT 0xFFC03720 /* NAND ECC Count Register */ +#define NFC_RST 0xFFC03724 /* NAND ECC Reset Register */ +#define NFC_PGCTL 0xFFC03728 /* NAND Page Control Register */ +#define NFC_READ 0xFFC0372C /* NAND Read Data Register */ +#define NFC_ADDR 0xFFC03740 /* NAND Address Register */ +#define NFC_CMD 0xFFC03744 /* NAND Command Register */ +#define NFC_DATA_WR 0xFFC03748 /* NAND Data Write Register */ +#define NFC_DATA_RD 0xFFC0374C /* NAND Data Read Register */ +#define DMA_TC_CNT 0xFFC00B0C +#define DMA_TC_PER 0xFFC00B10 #endif /* __BFIN_DEF_ADSP_BF522_proc__ */ diff --git a/arch/blackfin/include/asm/mach-bf527/BF524_cdef.h b/arch/blackfin/include/asm/mach-bf527/BF524_cdef.h index 25612bf..060dce3 100644 --- a/arch/blackfin/include/asm/mach-bf527/BF524_cdef.h +++ b/arch/blackfin/include/asm/mach-bf527/BF524_cdef.h @@ -6,26 +6,8 @@ #ifndef __BFIN_CDEF_ADSP_BF524_proc__ #define __BFIN_CDEF_ADSP_BF524_proc__ -#include "../mach-common/ADSP-EDN-core_cdef.h" +#include "BF522_cdef.h" -#include "ADSP-EDN-BF52x-extended_cdef.h" - -#define bfin_read_PLL_CTL() bfin_read16(PLL_CTL) -#define bfin_write_PLL_CTL(val) bfin_write16(PLL_CTL, val) -#define bfin_read_PLL_DIV() bfin_read16(PLL_DIV) -#define bfin_write_PLL_DIV(val) bfin_write16(PLL_DIV, val) -#define bfin_read_VR_CTL() bfin_read16(VR_CTL) -#define bfin_write_VR_CTL(val) bfin_write16(VR_CTL, val) -#define bfin_read_PLL_STAT() bfin_read16(PLL_STAT) -#define bfin_write_PLL_STAT(val) bfin_write16(PLL_STAT, val) -#define bfin_read_PLL_LOCKCNT() bfin_read16(PLL_LOCKCNT) -#define bfin_write_PLL_LOCKCNT(val) bfin_write16(PLL_LOCKCNT, val) -#define bfin_read_CHIPID() bfin_read32(CHIPID) -#define bfin_write_CHIPID(val) bfin_write32(CHIPID, val) -#define bfin_read_SWRST() bfin_read16(SWRST) -#define bfin_write_SWRST(val) bfin_write16(SWRST, val) -#define bfin_read_SYSCR() bfin_read16(SYSCR) -#define bfin_write_SYSCR(val) bfin_write16(SYSCR, val) #define bfin_read_USB_FADDR() bfin_read16(USB_FADDR) #define bfin_write_USB_FADDR(val) bfin_write16(USB_FADDR, val) #define bfin_read_USB_POWER() bfin_read16(USB_POWER) diff --git a/arch/blackfin/include/asm/mach-bf527/BF524_def.h b/arch/blackfin/include/asm/mach-bf527/BF524_def.h index 0a0056a..f0e7716 100644 --- a/arch/blackfin/include/asm/mach-bf527/BF524_def.h +++ b/arch/blackfin/include/asm/mach-bf527/BF524_def.h @@ -6,18 +6,8 @@ #ifndef __BFIN_DEF_ADSP_BF524_proc__ #define __BFIN_DEF_ADSP_BF524_proc__ -#include "../mach-common/ADSP-EDN-core_def.h" +#include "BF522_def.h" -#include "ADSP-EDN-BF52x-extended_def.h" - -#define PLL_CTL 0xFFC00000 /* PLL Control Register */ -#define PLL_DIV 0xFFC00004 /* PLL Divide Register */ -#define VR_CTL 0xFFC00008 /* Voltage Regulator Control Register */ -#define PLL_STAT 0xFFC0000C /* PLL Status Register */ -#define PLL_LOCKCNT 0xFFC00010 /* PLL Lock Count Register */ -#define CHIPID 0xFFC00014 -#define SWRST 0xFFC00100 /* Software Reset Register */ -#define SYSCR 0xFFC00104 /* System Configuration register */ #define USB_FADDR 0xFFC03800 /* Function address register */ #define USB_POWER 0xFFC03804 /* Power management register */ #define USB_INTRTX 0xFFC03808 /* Interrupt register for endpoint 0 and Tx endpoint 1 to 7 */ diff --git a/arch/blackfin/include/asm/mach-bf527/BF526_cdef.h b/arch/blackfin/include/asm/mach-bf527/BF526_cdef.h index aa320ac..515acd3 100644 --- a/arch/blackfin/include/asm/mach-bf527/BF526_cdef.h +++ b/arch/blackfin/include/asm/mach-bf527/BF526_cdef.h @@ -6,26 +6,8 @@ #ifndef __BFIN_CDEF_ADSP_BF526_proc__ #define __BFIN_CDEF_ADSP_BF526_proc__ -#include "../mach-common/ADSP-EDN-core_cdef.h" +#include "BF524_cdef.h" -#include "ADSP-EDN-BF52x-extended_cdef.h" - -#define bfin_read_PLL_CTL() bfin_read16(PLL_CTL) -#define bfin_write_PLL_CTL(val) bfin_write16(PLL_CTL, val) -#define bfin_read_PLL_DIV() bfin_read16(PLL_DIV) -#define bfin_write_PLL_DIV(val) bfin_write16(PLL_DIV, val) -#define bfin_read_VR_CTL() bfin_read16(VR_CTL) -#define bfin_write_VR_CTL(val) bfin_write16(VR_CTL, val) -#define bfin_read_PLL_STAT() bfin_read16(PLL_STAT) -#define bfin_write_PLL_STAT(val) bfin_write16(PLL_STAT, val) -#define bfin_read_PLL_LOCKCNT() bfin_read16(PLL_LOCKCNT) -#define bfin_write_PLL_LOCKCNT(val) bfin_write16(PLL_LOCKCNT, val) -#define bfin_read_CHIPID() bfin_read32(CHIPID) -#define bfin_write_CHIPID(val) bfin_write32(CHIPID, val) -#define bfin_read_SWRST() bfin_read16(SWRST) -#define bfin_write_SWRST(val) bfin_write16(SWRST, val) -#define bfin_read_SYSCR() bfin_read16(SYSCR) -#define bfin_write_SYSCR(val) bfin_write16(SYSCR, val) #define bfin_read_EMAC_OPMODE() bfin_read32(EMAC_OPMODE) #define bfin_write_EMAC_OPMODE(val) bfin_write32(EMAC_OPMODE, val) #define bfin_read_EMAC_ADDRLO() bfin_read32(EMAC_ADDRLO) @@ -184,343 +166,5 @@ #define bfin_write_EMAC_TXC_GE1024(val) bfin_write32(EMAC_TXC_GE1024, val) #define bfin_read_EMAC_TXC_ABORT() bfin_read32(EMAC_TXC_ABORT) #define bfin_write_EMAC_TXC_ABORT(val) bfin_write32(EMAC_TXC_ABORT, val) -#define bfin_read_USB_FADDR() bfin_read16(USB_FADDR) -#define bfin_write_USB_FADDR(val) bfin_write16(USB_FADDR, val) -#define bfin_read_USB_POWER() bfin_read16(USB_POWER) -#define bfin_write_USB_POWER(val) bfin_write16(USB_POWER, val) -#define bfin_read_USB_INTRTX() bfin_read16(USB_INTRTX) -#define bfin_write_USB_INTRTX(val) bfin_write16(USB_INTRTX, val) -#define bfin_read_USB_INTRRX() bfin_read16(USB_INTRRX) -#define bfin_write_USB_INTRRX(val) bfin_write16(USB_INTRRX, val) -#define bfin_read_USB_INTRTXE() bfin_read16(USB_INTRTXE) -#define bfin_write_USB_INTRTXE(val) bfin_write16(USB_INTRTXE, val) -#define bfin_read_USB_INTRRXE() bfin_read16(USB_INTRRXE) -#define bfin_write_USB_INTRRXE(val) bfin_write16(USB_INTRRXE, val) -#define bfin_read_USB_INTRUSB() bfin_read16(USB_INTRUSB) -#define bfin_write_USB_INTRUSB(val) bfin_write16(USB_INTRUSB, val) -#define bfin_read_USB_INTRUSBE() bfin_read16(USB_INTRUSBE) -#define bfin_write_USB_INTRUSBE(val) bfin_write16(USB_INTRUSBE, val) -#define bfin_read_USB_FRAME() bfin_read16(USB_FRAME) -#define bfin_write_USB_FRAME(val) bfin_write16(USB_FRAME, val) -#define bfin_read_USB_INDEX() bfin_read16(USB_INDEX) -#define bfin_write_USB_INDEX(val) bfin_write16(USB_INDEX, val) -#define bfin_read_USB_TESTMODE() bfin_read16(USB_TESTMODE) -#define bfin_write_USB_TESTMODE(val) bfin_write16(USB_TESTMODE, val) -#define bfin_read_USB_GLOBINTR() bfin_read16(USB_GLOBINTR) -#define bfin_write_USB_GLOBINTR(val) bfin_write16(USB_GLOBINTR, val) -#define bfin_read_USB_GLOBAL_CTL() bfin_read16(USB_GLOBAL_CTL) -#define bfin_write_USB_GLOBAL_CTL(val) bfin_write16(USB_GLOBAL_CTL, val) -#define bfin_read_USB_TX_MAX_PACKET() bfin_read16(USB_TX_MAX_PACKET) -#define bfin_write_USB_TX_MAX_PACKET(val) bfin_write16(USB_TX_MAX_PACKET, val) -#define bfin_read_USB_CSR0() bfin_read16(USB_CSR0) -#define bfin_write_USB_CSR0(val) bfin_write16(USB_CSR0, val) -#define bfin_read_USB_TXCSR() bfin_read16(USB_TXCSR) -#define bfin_write_USB_TXCSR(val) bfin_write16(USB_TXCSR, val) -#define bfin_read_USB_RX_MAX_PACKET() bfin_read16(USB_RX_MAX_PACKET) -#define bfin_write_USB_RX_MAX_PACKET(val) bfin_write16(USB_RX_MAX_PACKET, val) -#define bfin_read_USB_RXCSR() bfin_read16(USB_RXCSR) -#define bfin_write_USB_RXCSR(val) bfin_write16(USB_RXCSR, val) -#define bfin_read_USB_COUNT0() bfin_read16(USB_COUNT0) -#define bfin_write_USB_COUNT0(val) bfin_write16(USB_COUNT0, val) -#define bfin_read_USB_RXCOUNT() bfin_read16(USB_RXCOUNT) -#define bfin_write_USB_RXCOUNT(val) bfin_write16(USB_RXCOUNT, val) -#define bfin_read_USB_TXTYPE() bfin_read16(USB_TXTYPE) -#define bfin_write_USB_TXTYPE(val) bfin_write16(USB_TXTYPE, val) -#define bfin_read_USB_NAKLIMIT0() bfin_read16(USB_NAKLIMIT0) -#define bfin_write_USB_NAKLIMIT0(val) bfin_write16(USB_NAKLIMIT0, val) -#define bfin_read_USB_TXINTERVAL() bfin_read16(USB_TXINTERVAL) -#define bfin_write_USB_TXINTERVAL(val) bfin_write16(USB_TXINTERVAL, val) -#define bfin_read_USB_RXTYPE() bfin_read16(USB_RXTYPE) -#define bfin_write_USB_RXTYPE(val) bfin_write16(USB_RXTYPE, val) -#define bfin_read_USB_RXINTERVAL() bfin_read16(USB_RXINTERVAL) -#define bfin_write_USB_RXINTERVAL(val) bfin_write16(USB_RXINTERVAL, val) -#define bfin_read_USB_TXCOUNT() bfin_read16(USB_TXCOUNT) -#define bfin_write_USB_TXCOUNT(val) bfin_write16(USB_TXCOUNT, val) -#define bfin_read_USB_EP0_FIFO() bfin_read16(USB_EP0_FIFO) -#define bfin_write_USB_EP0_FIFO(val) bfin_write16(USB_EP0_FIFO, val) -#define bfin_read_USB_EP1_FIFO() bfin_read16(USB_EP1_FIFO) -#define bfin_write_USB_EP1_FIFO(val) bfin_write16(USB_EP1_FIFO, val) -#define bfin_read_USB_EP2_FIFO() bfin_read16(USB_EP2_FIFO) -#define bfin_write_USB_EP2_FIFO(val) bfin_write16(USB_EP2_FIFO, val) -#define bfin_read_USB_EP3_FIFO() bfin_read16(USB_EP3_FIFO) -#define bfin_write_USB_EP3_FIFO(val) bfin_write16(USB_EP3_FIFO, val) -#define bfin_read_USB_EP4_FIFO() bfin_read16(USB_EP4_FIFO) -#define bfin_write_USB_EP4_FIFO(val) bfin_write16(USB_EP4_FIFO, val) -#define bfin_read_USB_EP5_FIFO() bfin_read16(USB_EP5_FIFO) -#define bfin_write_USB_EP5_FIFO(val) bfin_write16(USB_EP5_FIFO, val) -#define bfin_read_USB_EP6_FIFO() bfin_read16(USB_EP6_FIFO) -#define bfin_write_USB_EP6_FIFO(val) bfin_write16(USB_EP6_FIFO, val) -#define bfin_read_USB_EP7_FIFO() bfin_read16(USB_EP7_FIFO) -#define bfin_write_USB_EP7_FIFO(val) bfin_write16(USB_EP7_FIFO, val) -#define bfin_read_USB_OTG_DEV_CTL() bfin_read16(USB_OTG_DEV_CTL) -#define bfin_write_USB_OTG_DEV_CTL(val) bfin_write16(USB_OTG_DEV_CTL, val) -#define bfin_read_USB_OTG_VBUS_IRQ() bfin_read16(USB_OTG_VBUS_IRQ) -#define bfin_write_USB_OTG_VBUS_IRQ(val) bfin_write16(USB_OTG_VBUS_IRQ, val) -#define bfin_read_USB_OTG_VBUS_MASK() bfin_read16(USB_OTG_VBUS_MASK) -#define bfin_write_USB_OTG_VBUS_MASK(val) bfin_write16(USB_OTG_VBUS_MASK, val) -#define bfin_read_USB_LINKINFO() bfin_read16(USB_LINKINFO) -#define bfin_write_USB_LINKINFO(val) bfin_write16(USB_LINKINFO, val) -#define bfin_read_USB_VPLEN() bfin_read16(USB_VPLEN) -#define bfin_write_USB_VPLEN(val) bfin_write16(USB_VPLEN, val) -#define bfin_read_USB_HS_EOF1() bfin_read16(USB_HS_EOF1) -#define bfin_write_USB_HS_EOF1(val) bfin_write16(USB_HS_EOF1, val) -#define bfin_read_USB_FS_EOF1() bfin_read16(USB_FS_EOF1) -#define bfin_write_USB_FS_EOF1(val) bfin_write16(USB_FS_EOF1, val) -#define bfin_read_USB_LS_EOF1() bfin_read16(USB_LS_EOF1) -#define bfin_write_USB_LS_EOF1(val) bfin_write16(USB_LS_EOF1, val) -#define bfin_read_USB_APHY_CNTRL() bfin_read16(USB_APHY_CNTRL) -#define bfin_write_USB_APHY_CNTRL(val) bfin_write16(USB_APHY_CNTRL, val) -#define bfin_read_USB_APHY_CALIB() bfin_read16(USB_APHY_CALIB) -#define bfin_write_USB_APHY_CALIB(val) bfin_write16(USB_APHY_CALIB, val) -#define bfin_read_USB_APHY_CNTRL2() bfin_read16(USB_APHY_CNTRL2) -#define bfin_write_USB_APHY_CNTRL2(val) bfin_write16(USB_APHY_CNTRL2, val) -#define bfin_read_USB_PHY_TEST() bfin_read16(USB_PHY_TEST) -#define bfin_write_USB_PHY_TEST(val) bfin_write16(USB_PHY_TEST, val) -#define bfin_read_USB_PLLOSC_CTRL() bfin_read16(USB_PLLOSC_CTRL) -#define bfin_write_USB_PLLOSC_CTRL(val) bfin_write16(USB_PLLOSC_CTRL, val) -#define bfin_read_USB_SRP_CLKDIV() bfin_read16(USB_SRP_CLKDIV) -#define bfin_write_USB_SRP_CLKDIV(val) bfin_write16(USB_SRP_CLKDIV, val) -#define bfin_read_USB_EP_NI0_TXMAXP() bfin_read16(USB_EP_NI0_TXMAXP) -#define bfin_write_USB_EP_NI0_TXMAXP(val) bfin_write16(USB_EP_NI0_TXMAXP, val) -#define bfin_read_USB_EP_NI0_TXCSR() bfin_read16(USB_EP_NI0_TXCSR) -#define bfin_write_USB_EP_NI0_TXCSR(val) bfin_write16(USB_EP_NI0_TXCSR, val) -#define bfin_read_USB_EP_NI0_RXMAXP() bfin_read16(USB_EP_NI0_RXMAXP) -#define bfin_write_USB_EP_NI0_RXMAXP(val) bfin_write16(USB_EP_NI0_RXMAXP, val) -#define bfin_read_USB_EP_NI0_RXCSR() bfin_read16(USB_EP_NI0_RXCSR) -#define bfin_write_USB_EP_NI0_RXCSR(val) bfin_write16(USB_EP_NI0_RXCSR, val) -#define bfin_read_USB_EP_NI0_RXCOUNT() bfin_read16(USB_EP_NI0_RXCOUNT) -#define bfin_write_USB_EP_NI0_RXCOUNT(val) bfin_write16(USB_EP_NI0_RXCOUNT, val) -#define bfin_read_USB_EP_NI0_TXTYPE() bfin_read16(USB_EP_NI0_TXTYPE) -#define bfin_write_USB_EP_NI0_TXTYPE(val) bfin_write16(USB_EP_NI0_TXTYPE, val) -#define bfin_read_USB_EP_NI0_TXINTERVAL() bfin_read16(USB_EP_NI0_TXINTERVAL) -#define bfin_write_USB_EP_NI0_TXINTERVAL(val) bfin_write16(USB_EP_NI0_TXINTERVAL, val) -#define bfin_read_USB_EP_NI0_RXTYPE() bfin_read16(USB_EP_NI0_RXTYPE) -#define bfin_write_USB_EP_NI0_RXTYPE(val) bfin_write16(USB_EP_NI0_RXTYPE, val) -#define bfin_read_USB_EP_NI0_RXINTERVAL() bfin_read16(USB_EP_NI0_RXINTERVAL) -#define bfin_write_USB_EP_NI0_RXINTERVAL(val) bfin_write16(USB_EP_NI0_RXINTERVAL, val) -#define bfin_read_USB_EP_NI0_TXCOUNT() bfin_read16(USB_EP_NI0_TXCOUNT) -#define bfin_write_USB_EP_NI0_TXCOUNT(val) bfin_write16(USB_EP_NI0_TXCOUNT, val) -#define bfin_read_USB_EP_NI1_TXMAXP() bfin_read16(USB_EP_NI1_TXMAXP) -#define bfin_write_USB_EP_NI1_TXMAXP(val) bfin_write16(USB_EP_NI1_TXMAXP, val) -#define bfin_read_USB_EP_NI1_TXCSR() bfin_read16(USB_EP_NI1_TXCSR) -#define bfin_write_USB_EP_NI1_TXCSR(val) bfin_write16(USB_EP_NI1_TXCSR, val) -#define bfin_read_USB_EP_NI1_RXMAXP() bfin_read16(USB_EP_NI1_RXMAXP) -#define bfin_write_USB_EP_NI1_RXMAXP(val) bfin_write16(USB_EP_NI1_RXMAXP, val) -#define bfin_read_USB_EP_NI1_RXCSR() bfin_read16(USB_EP_NI1_RXCSR) -#define bfin_write_USB_EP_NI1_RXCSR(val) bfin_write16(USB_EP_NI1_RXCSR, val) -#define bfin_read_USB_EP_NI1_RXCOUNT() bfin_read16(USB_EP_NI1_RXCOUNT) -#define bfin_write_USB_EP_NI1_RXCOUNT(val) bfin_write16(USB_EP_NI1_RXCOUNT, val) -#define bfin_read_USB_EP_NI1_TXTYPE() bfin_read16(USB_EP_NI1_TXTYPE) -#define bfin_write_USB_EP_NI1_TXTYPE(val) bfin_write16(USB_EP_NI1_TXTYPE, val) -#define bfin_read_USB_EP_NI1_TXINTERVAL() bfin_read16(USB_EP_NI1_TXINTERVAL) -#define bfin_write_USB_EP_NI1_TXINTERVAL(val) bfin_write16(USB_EP_NI1_TXINTERVAL, val) -#define bfin_read_USB_EP_NI1_RXTYPE() bfin_read16(USB_EP_NI1_RXTYPE) -#define bfin_write_USB_EP_NI1_RXTYPE(val) bfin_write16(USB_EP_NI1_RXTYPE, val) -#define bfin_read_USB_EP_NI1_RXINTERVAL() bfin_read16(USB_EP_NI1_RXINTERVAL) -#define bfin_write_USB_EP_NI1_RXINTERVAL(val) bfin_write16(USB_EP_NI1_RXINTERVAL, val) -#define bfin_read_USB_EP_NI1_TXCOUNT() bfin_read16(USB_EP_NI1_TXCOUNT) -#define bfin_write_USB_EP_NI1_TXCOUNT(val) bfin_write16(USB_EP_NI1_TXCOUNT, val) -#define bfin_read_USB_EP_NI2_TXMAXP() bfin_read16(USB_EP_NI2_TXMAXP) -#define bfin_write_USB_EP_NI2_TXMAXP(val) bfin_write16(USB_EP_NI2_TXMAXP, val) -#define bfin_read_USB_EP_NI2_TXCSR() bfin_read16(USB_EP_NI2_TXCSR) -#define bfin_write_USB_EP_NI2_TXCSR(val) bfin_write16(USB_EP_NI2_TXCSR, val) -#define bfin_read_USB_EP_NI2_RXMAXP() bfin_read16(USB_EP_NI2_RXMAXP) -#define bfin_write_USB_EP_NI2_RXMAXP(val) bfin_write16(USB_EP_NI2_RXMAXP, val) -#define bfin_read_USB_EP_NI2_RXCSR() bfin_read16(USB_EP_NI2_RXCSR) -#define bfin_write_USB_EP_NI2_RXCSR(val) bfin_write16(USB_EP_NI2_RXCSR, val) -#define bfin_read_USB_EP_NI2_RXCOUNT() bfin_read16(USB_EP_NI2_RXCOUNT) -#define bfin_write_USB_EP_NI2_RXCOUNT(val) bfin_write16(USB_EP_NI2_RXCOUNT, val) -#define bfin_read_USB_EP_NI2_TXTYPE() bfin_read16(USB_EP_NI2_TXTYPE) -#define bfin_write_USB_EP_NI2_TXTYPE(val) bfin_write16(USB_EP_NI2_TXTYPE, val) -#define bfin_read_USB_EP_NI2_TXINTERVAL() bfin_read16(USB_EP_NI2_TXINTERVAL) -#define bfin_write_USB_EP_NI2_TXINTERVAL(val) bfin_write16(USB_EP_NI2_TXINTERVAL, val) -#define bfin_read_USB_EP_NI2_RXTYPE() bfin_read16(USB_EP_NI2_RXTYPE) -#define bfin_write_USB_EP_NI2_RXTYPE(val) bfin_write16(USB_EP_NI2_RXTYPE, val) -#define bfin_read_USB_EP_NI2_RXINTERVAL() bfin_read16(USB_EP_NI2_RXINTERVAL) -#define bfin_write_USB_EP_NI2_RXINTERVAL(val) bfin_write16(USB_EP_NI2_RXINTERVAL, val) -#define bfin_read_USB_EP_NI2_TXCOUNT() bfin_read16(USB_EP_NI2_TXCOUNT) -#define bfin_write_USB_EP_NI2_TXCOUNT(val) bfin_write16(USB_EP_NI2_TXCOUNT, val) -#define bfin_read_USB_EP_NI3_TXMAXP() bfin_read16(USB_EP_NI3_TXMAXP) -#define bfin_write_USB_EP_NI3_TXMAXP(val) bfin_write16(USB_EP_NI3_TXMAXP, val) -#define bfin_read_USB_EP_NI3_TXCSR() bfin_read16(USB_EP_NI3_TXCSR) -#define bfin_write_USB_EP_NI3_TXCSR(val) bfin_write16(USB_EP_NI3_TXCSR, val) -#define bfin_read_USB_EP_NI3_RXMAXP() bfin_read16(USB_EP_NI3_RXMAXP) -#define bfin_write_USB_EP_NI3_RXMAXP(val) bfin_write16(USB_EP_NI3_RXMAXP, val) -#define bfin_read_USB_EP_NI3_RXCSR() bfin_read16(USB_EP_NI3_RXCSR) -#define bfin_write_USB_EP_NI3_RXCSR(val) bfin_write16(USB_EP_NI3_RXCSR, val) -#define bfin_read_USB_EP_NI3_RXCOUNT() bfin_read16(USB_EP_NI3_RXCOUNT) -#define bfin_write_USB_EP_NI3_RXCOUNT(val) bfin_write16(USB_EP_NI3_RXCOUNT, val) -#define bfin_read_USB_EP_NI3_TXTYPE() bfin_read16(USB_EP_NI3_TXTYPE) -#define bfin_write_USB_EP_NI3_TXTYPE(val) bfin_write16(USB_EP_NI3_TXTYPE, val) -#define bfin_read_USB_EP_NI3_TXINTERVAL() bfin_read16(USB_EP_NI3_TXINTERVAL) -#define bfin_write_USB_EP_NI3_TXINTERVAL(val) bfin_write16(USB_EP_NI3_TXINTERVAL, val) -#define bfin_read_USB_EP_NI3_RXTYPE() bfin_read16(USB_EP_NI3_RXTYPE) -#define bfin_write_USB_EP_NI3_RXTYPE(val) bfin_write16(USB_EP_NI3_RXTYPE, val) -#define bfin_read_USB_EP_NI3_RXINTERVAL() bfin_read16(USB_EP_NI3_RXINTERVAL) -#define bfin_write_USB_EP_NI3_RXINTERVAL(val) bfin_write16(USB_EP_NI3_RXINTERVAL, val) -#define bfin_read_USB_EP_NI3_TXCOUNT() bfin_read16(USB_EP_NI3_TXCOUNT) -#define bfin_write_USB_EP_NI3_TXCOUNT(val) bfin_write16(USB_EP_NI3_TXCOUNT, val) -#define bfin_read_USB_EP_NI4_TXMAXP() bfin_read16(USB_EP_NI4_TXMAXP) -#define bfin_write_USB_EP_NI4_TXMAXP(val) bfin_write16(USB_EP_NI4_TXMAXP, val) -#define bfin_read_USB_EP_NI4_TXCSR() bfin_read16(USB_EP_NI4_TXCSR) -#define bfin_write_USB_EP_NI4_TXCSR(val) bfin_write16(USB_EP_NI4_TXCSR, val) -#define bfin_read_USB_EP_NI4_RXMAXP() bfin_read16(USB_EP_NI4_RXMAXP) -#define bfin_write_USB_EP_NI4_RXMAXP(val) bfin_write16(USB_EP_NI4_RXMAXP, val) -#define bfin_read_USB_EP_NI4_RXCSR() bfin_read16(USB_EP_NI4_RXCSR) -#define bfin_write_USB_EP_NI4_RXCSR(val) bfin_write16(USB_EP_NI4_RXCSR, val) -#define bfin_read_USB_EP_NI4_RXCOUNT() bfin_read16(USB_EP_NI4_RXCOUNT) -#define bfin_write_USB_EP_NI4_RXCOUNT(val) bfin_write16(USB_EP_NI4_RXCOUNT, val) -#define bfin_read_USB_EP_NI4_TXTYPE() bfin_read16(USB_EP_NI4_TXTYPE) -#define bfin_write_USB_EP_NI4_TXTYPE(val) bfin_write16(USB_EP_NI4_TXTYPE, val) -#define bfin_read_USB_EP_NI4_TXINTERVAL() bfin_read16(USB_EP_NI4_TXINTERVAL) -#define bfin_write_USB_EP_NI4_TXINTERVAL(val) bfin_write16(USB_EP_NI4_TXINTERVAL, val) -#define bfin_read_USB_EP_NI4_RXTYPE() bfin_read16(USB_EP_NI4_RXTYPE) -#define bfin_write_USB_EP_NI4_RXTYPE(val) bfin_write16(USB_EP_NI4_RXTYPE, val) -#define bfin_read_USB_EP_NI4_RXINTERVAL() bfin_read16(USB_EP_NI4_RXINTERVAL) -#define bfin_write_USB_EP_NI4_RXINTERVAL(val) bfin_write16(USB_EP_NI4_RXINTERVAL, val) -#define bfin_read_USB_EP_NI4_TXCOUNT() bfin_read16(USB_EP_NI4_TXCOUNT) -#define bfin_write_USB_EP_NI4_TXCOUNT(val) bfin_write16(USB_EP_NI4_TXCOUNT, val) -#define bfin_read_USB_EP_NI5_TXMAXP() bfin_read16(USB_EP_NI5_TXMAXP) -#define bfin_write_USB_EP_NI5_TXMAXP(val) bfin_write16(USB_EP_NI5_TXMAXP, val) -#define bfin_read_USB_EP_NI5_TXCSR() bfin_read16(USB_EP_NI5_TXCSR) -#define bfin_write_USB_EP_NI5_TXCSR(val) bfin_write16(USB_EP_NI5_TXCSR, val) -#define bfin_read_USB_EP_NI5_RXMAXP() bfin_read16(USB_EP_NI5_RXMAXP) -#define bfin_write_USB_EP_NI5_RXMAXP(val) bfin_write16(USB_EP_NI5_RXMAXP, val) -#define bfin_read_USB_EP_NI5_RXCSR() bfin_read16(USB_EP_NI5_RXCSR) -#define bfin_write_USB_EP_NI5_RXCSR(val) bfin_write16(USB_EP_NI5_RXCSR, val) -#define bfin_read_USB_EP_NI5_RXCOUNT() bfin_read16(USB_EP_NI5_RXCOUNT) -#define bfin_write_USB_EP_NI5_RXCOUNT(val) bfin_write16(USB_EP_NI5_RXCOUNT, val) -#define bfin_read_USB_EP_NI5_TXTYPE() bfin_read16(USB_EP_NI5_TXTYPE) -#define bfin_write_USB_EP_NI5_TXTYPE(val) bfin_write16(USB_EP_NI5_TXTYPE, val) -#define bfin_read_USB_EP_NI5_TXINTERVAL() bfin_read16(USB_EP_NI5_TXINTERVAL) -#define bfin_write_USB_EP_NI5_TXINTERVAL(val) bfin_write16(USB_EP_NI5_TXINTERVAL, val) -#define bfin_read_USB_EP_NI5_RXTYPE() bfin_read16(USB_EP_NI5_RXTYPE) -#define bfin_write_USB_EP_NI5_RXTYPE(val) bfin_write16(USB_EP_NI5_RXTYPE, val) -#define bfin_read_USB_EP_NI5_RXINTERVAL() bfin_read16(USB_EP_NI5_RXINTERVAL) -#define bfin_write_USB_EP_NI5_RXINTERVAL(val) bfin_write16(USB_EP_NI5_RXINTERVAL, val) -#define bfin_read_USB_EP_NI5_TXCOUNT() bfin_read16(USB_EP_NI5_TXCOUNT) -#define bfin_write_USB_EP_NI5_TXCOUNT(val) bfin_write16(USB_EP_NI5_TXCOUNT, val) -#define bfin_read_USB_EP_NI6_TXMAXP() bfin_read16(USB_EP_NI6_TXMAXP) -#define bfin_write_USB_EP_NI6_TXMAXP(val) bfin_write16(USB_EP_NI6_TXMAXP, val) -#define bfin_read_USB_EP_NI6_TXCSR() bfin_read16(USB_EP_NI6_TXCSR) -#define bfin_write_USB_EP_NI6_TXCSR(val) bfin_write16(USB_EP_NI6_TXCSR, val) -#define bfin_read_USB_EP_NI6_RXMAXP() bfin_read16(USB_EP_NI6_RXMAXP) -#define bfin_write_USB_EP_NI6_RXMAXP(val) bfin_write16(USB_EP_NI6_RXMAXP, val) -#define bfin_read_USB_EP_NI6_RXCSR() bfin_read16(USB_EP_NI6_RXCSR) -#define bfin_write_USB_EP_NI6_RXCSR(val) bfin_write16(USB_EP_NI6_RXCSR, val) -#define bfin_read_USB_EP_NI6_RXCOUNT() bfin_read16(USB_EP_NI6_RXCOUNT) -#define bfin_write_USB_EP_NI6_RXCOUNT(val) bfin_write16(USB_EP_NI6_RXCOUNT, val) -#define bfin_read_USB_EP_NI6_TXTYPE() bfin_read16(USB_EP_NI6_TXTYPE) -#define bfin_write_USB_EP_NI6_TXTYPE(val) bfin_write16(USB_EP_NI6_TXTYPE, val) -#define bfin_read_USB_EP_NI6_TXINTERVAL() bfin_read16(USB_EP_NI6_TXINTERVAL) -#define bfin_write_USB_EP_NI6_TXINTERVAL(val) bfin_write16(USB_EP_NI6_TXINTERVAL, val) -#define bfin_read_USB_EP_NI6_RXTYPE() bfin_read16(USB_EP_NI6_RXTYPE) -#define bfin_write_USB_EP_NI6_RXTYPE(val) bfin_write16(USB_EP_NI6_RXTYPE, val) -#define bfin_read_USB_EP_NI6_RXINTERVAL() bfin_read16(USB_EP_NI6_RXINTERVAL) -#define bfin_write_USB_EP_NI6_RXINTERVAL(val) bfin_write16(USB_EP_NI6_RXINTERVAL, val) -#define bfin_read_USB_EP_NI6_TXCOUNT() bfin_read16(USB_EP_NI6_TXCOUNT) -#define bfin_write_USB_EP_NI6_TXCOUNT(val) bfin_write16(USB_EP_NI6_TXCOUNT, val) -#define bfin_read_USB_EP_NI7_TXMAXP() bfin_read16(USB_EP_NI7_TXMAXP) -#define bfin_write_USB_EP_NI7_TXMAXP(val) bfin_write16(USB_EP_NI7_TXMAXP, val) -#define bfin_read_USB_EP_NI7_TXCSR() bfin_read16(USB_EP_NI7_TXCSR) -#define bfin_write_USB_EP_NI7_TXCSR(val) bfin_write16(USB_EP_NI7_TXCSR, val) -#define bfin_read_USB_EP_NI7_RXMAXP() bfin_read16(USB_EP_NI7_RXMAXP) -#define bfin_write_USB_EP_NI7_RXMAXP(val) bfin_write16(USB_EP_NI7_RXMAXP, val) -#define bfin_read_USB_EP_NI7_RXCSR() bfin_read16(USB_EP_NI7_RXCSR) -#define bfin_write_USB_EP_NI7_RXCSR(val) bfin_write16(USB_EP_NI7_RXCSR, val) -#define bfin_read_USB_EP_NI7_RXCOUNT() bfin_read16(USB_EP_NI7_RXCOUNT) -#define bfin_write_USB_EP_NI7_RXCOUNT(val) bfin_write16(USB_EP_NI7_RXCOUNT, val) -#define bfin_read_USB_EP_NI7_TXTYPE() bfin_read16(USB_EP_NI7_TXTYPE) -#define bfin_write_USB_EP_NI7_TXTYPE(val) bfin_write16(USB_EP_NI7_TXTYPE, val) -#define bfin_read_USB_EP_NI7_TXINTERVAL() bfin_read16(USB_EP_NI7_TXINTERVAL) -#define bfin_write_USB_EP_NI7_TXINTERVAL(val) bfin_write16(USB_EP_NI7_TXINTERVAL, val) -#define bfin_read_USB_EP_NI7_RXTYPE() bfin_read16(USB_EP_NI7_RXTYPE) -#define bfin_write_USB_EP_NI7_RXTYPE(val) bfin_write16(USB_EP_NI7_RXTYPE, val) -#define bfin_read_USB_EP_NI7_RXINTERVAL() bfin_read16(USB_EP_NI7_RXINTERVAL) -#define bfin_write_USB_EP_NI7_RXINTERVAL(val) bfin_write16(USB_EP_NI7_RXINTERVAL, val) -#define bfin_read_USB_EP_NI7_TXCOUNT() bfin_read16(USB_EP_NI7_TXCOUNT) -#define bfin_write_USB_EP_NI7_TXCOUNT(val) bfin_write16(USB_EP_NI7_TXCOUNT, val) -#define bfin_read_USB_DMA_INTERRUPT() bfin_read16(USB_DMA_INTERRUPT) -#define bfin_write_USB_DMA_INTERRUPT(val) bfin_write16(USB_DMA_INTERRUPT, val) -#define bfin_read_USB_DMA0_CONTROL() bfin_read16(USB_DMA0_CONTROL) -#define bfin_write_USB_DMA0_CONTROL(val) bfin_write16(USB_DMA0_CONTROL, val) -#define bfin_read_USB_DMA0_ADDRLOW() bfin_read16(USB_DMA0_ADDRLOW) -#define bfin_write_USB_DMA0_ADDRLOW(val) bfin_write16(USB_DMA0_ADDRLOW, val) -#define bfin_read_USB_DMA0_ADDRHIGH() bfin_read16(USB_DMA0_ADDRHIGH) -#define bfin_write_USB_DMA0_ADDRHIGH(val) bfin_write16(USB_DMA0_ADDRHIGH, val) -#define bfin_read_USB_DMA0_COUNTLOW() bfin_read16(USB_DMA0_COUNTLOW) -#define bfin_write_USB_DMA0_COUNTLOW(val) bfin_write16(USB_DMA0_COUNTLOW, val) -#define bfin_read_USB_DMA0_COUNTHIGH() bfin_read16(USB_DMA0_COUNTHIGH) -#define bfin_write_USB_DMA0_COUNTHIGH(val) bfin_write16(USB_DMA0_COUNTHIGH, val) -#define bfin_read_USB_DMA1_CONTROL() bfin_read16(USB_DMA1_CONTROL) -#define bfin_write_USB_DMA1_CONTROL(val) bfin_write16(USB_DMA1_CONTROL, val) -#define bfin_read_USB_DMA1_ADDRLOW() bfin_read16(USB_DMA1_ADDRLOW) -#define bfin_write_USB_DMA1_ADDRLOW(val) bfin_write16(USB_DMA1_ADDRLOW, val) -#define bfin_read_USB_DMA1_ADDRHIGH() bfin_read16(USB_DMA1_ADDRHIGH) -#define bfin_write_USB_DMA1_ADDRHIGH(val) bfin_write16(USB_DMA1_ADDRHIGH, val) -#define bfin_read_USB_DMA1_COUNTLOW() bfin_read16(USB_DMA1_COUNTLOW) -#define bfin_write_USB_DMA1_COUNTLOW(val) bfin_write16(USB_DMA1_COUNTLOW, val) -#define bfin_read_USB_DMA1_COUNTHIGH() bfin_read16(USB_DMA1_COUNTHIGH) -#define bfin_write_USB_DMA1_COUNTHIGH(val) bfin_write16(USB_DMA1_COUNTHIGH, val) -#define bfin_read_USB_DMA2_CONTROL() bfin_read16(USB_DMA2_CONTROL) -#define bfin_write_USB_DMA2_CONTROL(val) bfin_write16(USB_DMA2_CONTROL, val) -#define bfin_read_USB_DMA2_ADDRLOW() bfin_read16(USB_DMA2_ADDRLOW) -#define bfin_write_USB_DMA2_ADDRLOW(val) bfin_write16(USB_DMA2_ADDRLOW, val) -#define bfin_read_USB_DMA2_ADDRHIGH() bfin_read16(USB_DMA2_ADDRHIGH) -#define bfin_write_USB_DMA2_ADDRHIGH(val) bfin_write16(USB_DMA2_ADDRHIGH, val) -#define bfin_read_USB_DMA2_COUNTLOW() bfin_read16(USB_DMA2_COUNTLOW) -#define bfin_write_USB_DMA2_COUNTLOW(val) bfin_write16(USB_DMA2_COUNTLOW, val) -#define bfin_read_USB_DMA2_COUNTHIGH() bfin_read16(USB_DMA2_COUNTHIGH) -#define bfin_write_USB_DMA2_COUNTHIGH(val) bfin_write16(USB_DMA2_COUNTHIGH, val) -#define bfin_read_USB_DMA3_CONTROL() bfin_read16(USB_DMA3_CONTROL) -#define bfin_write_USB_DMA3_CONTROL(val) bfin_write16(USB_DMA3_CONTROL, val) -#define bfin_read_USB_DMA3_ADDRLOW() bfin_read16(USB_DMA3_ADDRLOW) -#define bfin_write_USB_DMA3_ADDRLOW(val) bfin_write16(USB_DMA3_ADDRLOW, val) -#define bfin_read_USB_DMA3_ADDRHIGH() bfin_read16(USB_DMA3_ADDRHIGH) -#define bfin_write_USB_DMA3_ADDRHIGH(val) bfin_write16(USB_DMA3_ADDRHIGH, val) -#define bfin_read_USB_DMA3_COUNTLOW() bfin_read16(USB_DMA3_COUNTLOW) -#define bfin_write_USB_DMA3_COUNTLOW(val) bfin_write16(USB_DMA3_COUNTLOW, val) -#define bfin_read_USB_DMA3_COUNTHIGH() bfin_read16(USB_DMA3_COUNTHIGH) -#define bfin_write_USB_DMA3_COUNTHIGH(val) bfin_write16(USB_DMA3_COUNTHIGH, val) -#define bfin_read_USB_DMA4_CONTROL() bfin_read16(USB_DMA4_CONTROL) -#define bfin_write_USB_DMA4_CONTROL(val) bfin_write16(USB_DMA4_CONTROL, val) -#define bfin_read_USB_DMA4_ADDRLOW() bfin_read16(USB_DMA4_ADDRLOW) -#define bfin_write_USB_DMA4_ADDRLOW(val) bfin_write16(USB_DMA4_ADDRLOW, val) -#define bfin_read_USB_DMA4_ADDRHIGH() bfin_read16(USB_DMA4_ADDRHIGH) -#define bfin_write_USB_DMA4_ADDRHIGH(val) bfin_write16(USB_DMA4_ADDRHIGH, val) -#define bfin_read_USB_DMA4_COUNTLOW() bfin_read16(USB_DMA4_COUNTLOW) -#define bfin_write_USB_DMA4_COUNTLOW(val) bfin_write16(USB_DMA4_COUNTLOW, val) -#define bfin_read_USB_DMA4_COUNTHIGH() bfin_read16(USB_DMA4_COUNTHIGH) -#define bfin_write_USB_DMA4_COUNTHIGH(val) bfin_write16(USB_DMA4_COUNTHIGH, val) -#define bfin_read_USB_DMA5_CONTROL() bfin_read16(USB_DMA5_CONTROL) -#define bfin_write_USB_DMA5_CONTROL(val) bfin_write16(USB_DMA5_CONTROL, val) -#define bfin_read_USB_DMA5_ADDRLOW() bfin_read16(USB_DMA5_ADDRLOW) -#define bfin_write_USB_DMA5_ADDRLOW(val) bfin_write16(USB_DMA5_ADDRLOW, val) -#define bfin_read_USB_DMA5_ADDRHIGH() bfin_read16(USB_DMA5_ADDRHIGH) -#define bfin_write_USB_DMA5_ADDRHIGH(val) bfin_write16(USB_DMA5_ADDRHIGH, val) -#define bfin_read_USB_DMA5_COUNTLOW() bfin_read16(USB_DMA5_COUNTLOW) -#define bfin_write_USB_DMA5_COUNTLOW(val) bfin_write16(USB_DMA5_COUNTLOW, val) -#define bfin_read_USB_DMA5_COUNTHIGH() bfin_read16(USB_DMA5_COUNTHIGH) -#define bfin_write_USB_DMA5_COUNTHIGH(val) bfin_write16(USB_DMA5_COUNTHIGH, val) -#define bfin_read_USB_DMA6_CONTROL() bfin_read16(USB_DMA6_CONTROL) -#define bfin_write_USB_DMA6_CONTROL(val) bfin_write16(USB_DMA6_CONTROL, val) -#define bfin_read_USB_DMA6_ADDRLOW() bfin_read16(USB_DMA6_ADDRLOW) -#define bfin_write_USB_DMA6_ADDRLOW(val) bfin_write16(USB_DMA6_ADDRLOW, val) -#define bfin_read_USB_DMA6_ADDRHIGH() bfin_read16(USB_DMA6_ADDRHIGH) -#define bfin_write_USB_DMA6_ADDRHIGH(val) bfin_write16(USB_DMA6_ADDRHIGH, val) -#define bfin_read_USB_DMA6_COUNTLOW() bfin_read16(USB_DMA6_COUNTLOW) -#define bfin_write_USB_DMA6_COUNTLOW(val) bfin_write16(USB_DMA6_COUNTLOW, val) -#define bfin_read_USB_DMA6_COUNTHIGH() bfin_read16(USB_DMA6_COUNTHIGH) -#define bfin_write_USB_DMA6_COUNTHIGH(val) bfin_write16(USB_DMA6_COUNTHIGH, val) -#define bfin_read_USB_DMA7_CONTROL() bfin_read16(USB_DMA7_CONTROL) -#define bfin_write_USB_DMA7_CONTROL(val) bfin_write16(USB_DMA7_CONTROL, val) -#define bfin_read_USB_DMA7_ADDRLOW() bfin_read16(USB_DMA7_ADDRLOW) -#define bfin_write_USB_DMA7_ADDRLOW(val) bfin_write16(USB_DMA7_ADDRLOW, val) -#define bfin_read_USB_DMA7_ADDRHIGH() bfin_read16(USB_DMA7_ADDRHIGH) -#define bfin_write_USB_DMA7_ADDRHIGH(val) bfin_write16(USB_DMA7_ADDRHIGH, val) -#define bfin_read_USB_DMA7_COUNTLOW() bfin_read16(USB_DMA7_COUNTLOW) -#define bfin_write_USB_DMA7_COUNTLOW(val) bfin_write16(USB_DMA7_COUNTLOW, val) -#define bfin_read_USB_DMA7_COUNTHIGH() bfin_read16(USB_DMA7_COUNTHIGH) -#define bfin_write_USB_DMA7_COUNTHIGH(val) bfin_write16(USB_DMA7_COUNTHIGH, val) #endif /* __BFIN_CDEF_ADSP_BF526_proc__ */ diff --git a/arch/blackfin/include/asm/mach-bf527/BF526_def.h b/arch/blackfin/include/asm/mach-bf527/BF526_def.h index 935d11e..40b5b01 100644 --- a/arch/blackfin/include/asm/mach-bf527/BF526_def.h +++ b/arch/blackfin/include/asm/mach-bf527/BF526_def.h @@ -6,18 +6,8 @@ #ifndef __BFIN_DEF_ADSP_BF526_proc__ #define __BFIN_DEF_ADSP_BF526_proc__ -#include "../mach-common/ADSP-EDN-core_def.h" +#include "BF524_def.h" -#include "ADSP-EDN-BF52x-extended_def.h" - -#define PLL_CTL 0xFFC00000 /* PLL Control Register */ -#define PLL_DIV 0xFFC00004 /* PLL Divide Register */ -#define VR_CTL 0xFFC00008 /* Voltage Regulator Control Register */ -#define PLL_STAT 0xFFC0000C /* PLL Status Register */ -#define PLL_LOCKCNT 0xFFC00010 /* PLL Lock Count Register */ -#define CHIPID 0xFFC00014 -#define SWRST 0xFFC00100 /* Software Reset Register */ -#define SYSCR 0xFFC00104 /* System Configuration register */ #define EMAC_OPMODE 0xFFC03000 /* Operating Mode Register */ #define EMAC_ADDRLO 0xFFC03004 /* Address Low (32 LSBs) Register */ #define EMAC_ADDRHI 0xFFC03008 /* Address High (16 MSBs) Register */ @@ -97,174 +87,5 @@ #define EMAC_TXC_LT1024 0xFFC031D0 /* Good TX Frame Count - Byte Count 512 <= x < 1024 */ #define EMAC_TXC_GE1024 0xFFC031D4 /* Good TX Frame Count - Byte Count x >= 1024 */ #define EMAC_TXC_ABORT 0xFFC031D8 /* Total TX Frames Aborted Count */ -#define USB_FADDR 0xFFC03800 /* Function address register */ -#define USB_POWER 0xFFC03804 /* Power management register */ -#define USB_INTRTX 0xFFC03808 /* Interrupt register for endpoint 0 and Tx endpoint 1 to 7 */ -#define USB_INTRRX 0xFFC0380C /* Interrupt register for Rx endpoints 1 to 7 */ -#define USB_INTRTXE 0xFFC03810 /* Interrupt enable register for IntrTx */ -#define USB_INTRRXE 0xFFC03814 /* Interrupt enable register for IntrRx */ -#define USB_INTRUSB 0xFFC03818 /* Interrupt register for common USB interrupts */ -#define USB_INTRUSBE 0xFFC0381C /* Interrupt enable register for IntrUSB */ -#define USB_FRAME 0xFFC03820 /* USB frame number */ -#define USB_INDEX 0xFFC03824 /* Index register for selecting the indexed endpoint registers */ -#define USB_TESTMODE 0xFFC03828 /* Enabled USB 20 test modes */ -#define USB_GLOBINTR 0xFFC0382C /* Global Interrupt Mask register and Wakeup Exception Interrupt */ -#define USB_GLOBAL_CTL 0xFFC03830 /* Global Clock Control for the core */ -#define USB_TX_MAX_PACKET 0xFFC03840 /* Maximum packet size for Host Tx endpoint */ -#define USB_CSR0 0xFFC03844 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */ -#define USB_TXCSR 0xFFC03844 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */ -#define USB_RX_MAX_PACKET 0xFFC03848 /* Maximum packet size for Host Rx endpoint */ -#define USB_RXCSR 0xFFC0384C /* Control Status register for Host Rx endpoint */ -#define USB_COUNT0 0xFFC03850 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */ -#define USB_RXCOUNT 0xFFC03850 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */ -#define USB_TXTYPE 0xFFC03854 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint */ -#define USB_NAKLIMIT0 0xFFC03858 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */ -#define USB_TXINTERVAL 0xFFC03858 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */ -#define USB_RXTYPE 0xFFC0385C /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint */ -#define USB_RXINTERVAL 0xFFC03860 /* Sets the polling interval for Interrupt and Isochronous transfers or the NAK response timeout on Bulk transfers */ -#define USB_TXCOUNT 0xFFC03868 /* Number of bytes to be written to the selected endpoint Tx FIFO */ -#define USB_EP0_FIFO 0xFFC03880 /* Endpoint 0 FIFO */ -#define USB_EP1_FIFO 0xFFC03888 /* Endpoint 1 FIFO */ -#define USB_EP2_FIFO 0xFFC03890 /* Endpoint 2 FIFO */ -#define USB_EP3_FIFO 0xFFC03898 /* Endpoint 3 FIFO */ -#define USB_EP4_FIFO 0xFFC038A0 /* Endpoint 4 FIFO */ -#define USB_EP5_FIFO 0xFFC038A8 /* Endpoint 5 FIFO */ -#define USB_EP6_FIFO 0xFFC038B0 /* Endpoint 6 FIFO */ -#define USB_EP7_FIFO 0xFFC038B8 /* Endpoint 7 FIFO */ -#define USB_OTG_DEV_CTL 0xFFC03900 /* OTG Device Control Register */ -#define USB_OTG_VBUS_IRQ 0xFFC03904 /* OTG VBUS Control Interrupts */ -#define USB_OTG_VBUS_MASK 0xFFC03908 /* VBUS Control Interrupt Enable */ -#define USB_LINKINFO 0xFFC03948 /* Enables programming of some PHY-side delays */ -#define USB_VPLEN 0xFFC0394C /* Determines duration of VBUS pulse for VBUS charging */ -#define USB_HS_EOF1 0xFFC03950 /* Time buffer for High-Speed transactions */ -#define USB_FS_EOF1 0xFFC03954 /* Time buffer for Full-Speed transactions */ -#define USB_LS_EOF1 0xFFC03958 /* Time buffer for Low-Speed transactions */ -#define USB_APHY_CNTRL 0xFFC039E0 /* Register that increases visibility of Analog PHY */ -#define USB_APHY_CALIB 0xFFC039E4 /* Register used to set some calibration values */ -#define USB_APHY_CNTRL2 0xFFC039E8 /* Register used to prevent re-enumeration once Moab goes into hibernate mode */ -#define USB_PHY_TEST 0xFFC039EC /* Used for reducing simulation time and simplifies FIFO testability */ -#define USB_PLLOSC_CTRL 0xFFC039F0 /* Used to program different parameters for USB PLL and Oscillator */ -#define USB_SRP_CLKDIV 0xFFC039F4 /* Used to program clock divide value for the clock fed to the SRP detection logic */ -#define USB_EP_NI0_TXMAXP 0xFFC03A00 /* Maximum packet size for Host Tx endpoint0 */ -#define USB_EP_NI0_TXCSR 0xFFC03A04 /* Control Status register for endpoint 0 */ -#define USB_EP_NI0_RXMAXP 0xFFC03A08 /* Maximum packet size for Host Rx endpoint0 */ -#define USB_EP_NI0_RXCSR 0xFFC03A0C /* Control Status register for Host Rx endpoint0 */ -#define USB_EP_NI0_RXCOUNT 0xFFC03A10 /* Number of bytes received in endpoint 0 FIFO */ -#define USB_EP_NI0_TXTYPE 0xFFC03A14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint0 */ -#define USB_EP_NI0_TXINTERVAL 0xFFC03A18 /* Sets the NAK response timeout on Endpoint 0 */ -#define USB_EP_NI0_RXTYPE 0xFFC03A1C /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint0 */ -#define USB_EP_NI0_RXINTERVAL 0xFFC03A20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint0 */ -#define USB_EP_NI0_TXCOUNT 0xFFC03A28 /* Number of bytes to be written to the endpoint0 Tx FIFO */ -#define USB_EP_NI1_TXMAXP 0xFFC03A40 /* Maximum packet size for Host Tx endpoint1 */ -#define USB_EP_NI1_TXCSR 0xFFC03A44 /* Control Status register for endpoint1 */ -#define USB_EP_NI1_RXMAXP 0xFFC03A48 /* Maximum packet size for Host Rx endpoint1 */ -#define USB_EP_NI1_RXCSR 0xFFC03A4C /* Control Status register for Host Rx endpoint1 */ -#define USB_EP_NI1_RXCOUNT 0xFFC03A50 /* Number of bytes received in endpoint1 FIFO */ -#define USB_EP_NI1_TXTYPE 0xFFC03A54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint1 */ -#define USB_EP_NI1_TXINTERVAL 0xFFC03A58 /* Sets the NAK response timeout on Endpoint1 */ -#define USB_EP_NI1_RXTYPE 0xFFC03A5C /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint1 */ -#define USB_EP_NI1_RXINTERVAL 0xFFC03A60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint1 */ -#define USB_EP_NI1_TXCOUNT 0xFFC03A68 /* Number of bytes to be written to the+H102 endpoint1 Tx FIFO */ -#define USB_EP_NI2_TXMAXP 0xFFC03A80 /* Maximum packet size for Host Tx endpoint2 */ -#define USB_EP_NI2_TXCSR 0xFFC03A84 /* Control Status register for endpoint2 */ -#define USB_EP_NI2_RXMAXP 0xFFC03A88 /* Maximum packet size for Host Rx endpoint2 */ -#define USB_EP_NI2_RXCSR 0xFFC03A8C /* Control Status register for Host Rx endpoint2 */ -#define USB_EP_NI2_RXCOUNT 0xFFC03A90 /* Number of bytes received in endpoint2 FIFO */ -#define USB_EP_NI2_TXTYPE 0xFFC03A94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint2 */ -#define USB_EP_NI2_TXINTERVAL 0xFFC03A98 /* Sets the NAK response timeout on Endpoint2 */ -#define USB_EP_NI2_RXTYPE 0xFFC03A9C /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint2 */ -#define USB_EP_NI2_RXINTERVAL 0xFFC03AA0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint2 */ -#define USB_EP_NI2_TXCOUNT 0xFFC03AA8 /* Number of bytes to be written to the endpoint2 Tx FIFO */ -#define USB_EP_NI3_TXMAXP 0xFFC03AC0 /* Maximum packet size for Host Tx endpoint3 */ -#define USB_EP_NI3_TXCSR 0xFFC03AC4 /* Control Status register for endpoint3 */ -#define USB_EP_NI3_RXMAXP 0xFFC03AC8 /* Maximum packet size for Host Rx endpoint3 */ -#define USB_EP_NI3_RXCSR 0xFFC03ACC /* Control Status register for Host Rx endpoint3 */ -#define USB_EP_NI3_RXCOUNT 0xFFC03AD0 /* Number of bytes received in endpoint3 FIFO */ -#define USB_EP_NI3_TXTYPE 0xFFC03AD4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint3 */ -#define USB_EP_NI3_TXINTERVAL 0xFFC03AD8 /* Sets the NAK response timeout on Endpoint3 */ -#define USB_EP_NI3_RXTYPE 0xFFC03ADC /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint3 */ -#define USB_EP_NI3_RXINTERVAL 0xFFC03AE0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint3 */ -#define USB_EP_NI3_TXCOUNT 0xFFC03AE8 /* Number of bytes to be written to the H124endpoint3 Tx FIFO */ -#define USB_EP_NI4_TXMAXP 0xFFC03B00 /* Maximum packet size for Host Tx endpoint4 */ -#define USB_EP_NI4_TXCSR 0xFFC03B04 /* Control Status register for endpoint4 */ -#define USB_EP_NI4_RXMAXP 0xFFC03B08 /* Maximum packet size for Host Rx endpoint4 */ -#define USB_EP_NI4_RXCSR 0xFFC03B0C /* Control Status register for Host Rx endpoint4 */ -#define USB_EP_NI4_RXCOUNT 0xFFC03B10 /* Number of bytes received in endpoint4 FIFO */ -#define USB_EP_NI4_TXTYPE 0xFFC03B14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint4 */ -#define USB_EP_NI4_TXINTERVAL 0xFFC03B18 /* Sets the NAK response timeout on Endpoint4 */ -#define USB_EP_NI4_RXTYPE 0xFFC03B1C /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint4 */ -#define USB_EP_NI4_RXINTERVAL 0xFFC03B20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint4 */ -#define USB_EP_NI4_TXCOUNT 0xFFC03B28 /* Number of bytes to be written to the endpoint4 Tx FIFO */ -#define USB_EP_NI5_TXMAXP 0xFFC03B40 /* Maximum packet size for Host Tx endpoint5 */ -#define USB_EP_NI5_TXCSR 0xFFC03B44 /* Control Status register for endpoint5 */ -#define USB_EP_NI5_RXMAXP 0xFFC03B48 /* Maximum packet size for Host Rx endpoint5 */ -#define USB_EP_NI5_RXCSR 0xFFC03B4C /* Control Status register for Host Rx endpoint5 */ -#define USB_EP_NI5_RXCOUNT 0xFFC03B50 /* Number of bytes received in endpoint5 FIFO */ -#define USB_EP_NI5_TXTYPE 0xFFC03B54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint5 */ -#define USB_EP_NI5_TXINTERVAL 0xFFC03B58 /* Sets the NAK response timeout on Endpoint5 */ -#define USB_EP_NI5_RXTYPE 0xFFC03B5C /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint5 */ -#define USB_EP_NI5_RXINTERVAL 0xFFC03B60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint5 */ -#define USB_EP_NI5_TXCOUNT 0xFFC03B68 /* Number of bytes to be written to the endpoint5 Tx FIFO */ -#define USB_EP_NI6_TXMAXP 0xFFC03B80 /* Maximum packet size for Host Tx endpoint6 */ -#define USB_EP_NI6_TXCSR 0xFFC03B84 /* Control Status register for endpoint6 */ -#define USB_EP_NI6_RXMAXP 0xFFC03B88 /* Maximum packet size for Host Rx endpoint6 */ -#define USB_EP_NI6_RXCSR 0xFFC03B8C /* Control Status register for Host Rx endpoint6 */ -#define USB_EP_NI6_RXCOUNT 0xFFC03B90 /* Number of bytes received in endpoint6 FIFO */ -#define USB_EP_NI6_TXTYPE 0xFFC03B94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint6 */ -#define USB_EP_NI6_TXINTERVAL 0xFFC03B98 /* Sets the NAK response timeout on Endpoint6 */ -#define USB_EP_NI6_RXTYPE 0xFFC03B9C /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint6 */ -#define USB_EP_NI6_RXINTERVAL 0xFFC03BA0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint6 */ -#define USB_EP_NI6_TXCOUNT 0xFFC03BA8 /* Number of bytes to be written to the endpoint6 Tx FIFO */ -#define USB_EP_NI7_TXMAXP 0xFFC03BC0 /* Maximum packet size for Host Tx endpoint7 */ -#define USB_EP_NI7_TXCSR 0xFFC03BC4 /* Control Status register for endpoint7 */ -#define USB_EP_NI7_RXMAXP 0xFFC03BC8 /* Maximum packet size for Host Rx endpoint7 */ -#define USB_EP_NI7_RXCSR 0xFFC03BCC /* Control Status register for Host Rx endpoint7 */ -#define USB_EP_NI7_RXCOUNT 0xFFC03BD0 /* Number of bytes received in endpoint7 FIFO */ -#define USB_EP_NI7_TXTYPE 0xFFC03BD4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint7 */ -#define USB_EP_NI7_TXINTERVAL 0xFFC03BD8 /* Sets the NAK response timeout on Endpoint7 */ -#define USB_EP_NI7_RXTYPE 0xFFC03BDC /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint7 */ -#define USB_EP_NI7_RXINTERVAL 0xFFC03BF0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */ -#define USB_EP_NI7_TXCOUNT 0xFFC03BF8 /* Number of bytes to be written to the endpoint7 Tx FIFO */ -#define USB_DMA_INTERRUPT 0xFFC03C00 /* Indicates pending interrupts for the DMA channels */ -#define USB_DMA0_CONTROL 0xFFC03C04 /* DMA master channel 0 configuration */ -#define USB_DMA0_ADDRLOW 0xFFC03C08 /* Lower 16-bits of memory source/destination address for DMA master channel 0 */ -#define USB_DMA0_ADDRHIGH 0xFFC03C0C /* Upper 16-bits of memory source/destination address for DMA master channel 0 */ -#define USB_DMA0_COUNTLOW 0xFFC03C10 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 0 */ -#define USB_DMA0_COUNTHIGH 0xFFC03C14 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 0 */ -#define USB_DMA1_CONTROL 0xFFC03C24 /* DMA master channel 1 configuration */ -#define USB_DMA1_ADDRLOW 0xFFC03C28 /* Lower 16-bits of memory source/destination address for DMA master channel 1 */ -#define USB_DMA1_ADDRHIGH 0xFFC03C2C /* Upper 16-bits of memory source/destination address for DMA master channel 1 */ -#define USB_DMA1_COUNTLOW 0xFFC03C30 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 1 */ -#define USB_DMA1_COUNTHIGH 0xFFC03C34 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 1 */ -#define USB_DMA2_CONTROL 0xFFC03C44 /* DMA master channel 2 configuration */ -#define USB_DMA2_ADDRLOW 0xFFC03C48 /* Lower 16-bits of memory source/destination address for DMA master channel 2 */ -#define USB_DMA2_ADDRHIGH 0xFFC03C4C /* Upper 16-bits of memory source/destination address for DMA master channel 2 */ -#define USB_DMA2_COUNTLOW 0xFFC03C50 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 2 */ -#define USB_DMA2_COUNTHIGH 0xFFC03C54 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 2 */ -#define USB_DMA3_CONTROL 0xFFC03C64 /* DMA master channel 3 configuration */ -#define USB_DMA3_ADDRLOW 0xFFC03C68 /* Lower 16-bits of memory source/destination address for DMA master channel 3 */ -#define USB_DMA3_ADDRHIGH 0xFFC03C6C /* Upper 16-bits of memory source/destination address for DMA master channel 3 */ -#define USB_DMA3_COUNTLOW 0xFFC03C70 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 3 */ -#define USB_DMA3_COUNTHIGH 0xFFC03C74 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 3 */ -#define USB_DMA4_CONTROL 0xFFC03C84 /* DMA master channel 4 configuration */ -#define USB_DMA4_ADDRLOW 0xFFC03C88 /* Lower 16-bits of memory source/destination address for DMA master channel 4 */ -#define USB_DMA4_ADDRHIGH 0xFFC03C8C /* Upper 16-bits of memory source/destination address for DMA master channel 4 */ -#define USB_DMA4_COUNTLOW 0xFFC03C90 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 4 */ -#define USB_DMA4_COUNTHIGH 0xFFC03C94 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 4 */ -#define USB_DMA5_CONTROL 0xFFC03CA4 /* DMA master channel 5 configuration */ -#define USB_DMA5_ADDRLOW 0xFFC03CA8 /* Lower 16-bits of memory source/destination address for DMA master channel 5 */ -#define USB_DMA5_ADDRHIGH 0xFFC03CAC /* Upper 16-bits of memory source/destination address for DMA master channel 5 */ -#define USB_DMA5_COUNTLOW 0xFFC03CB0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 5 */ -#define USB_DMA5_COUNTHIGH 0xFFC03CB4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 5 */ -#define USB_DMA6_CONTROL 0xFFC03CC4 /* DMA master channel 6 configuration */ -#define USB_DMA6_ADDRLOW 0xFFC03CC8 /* Lower 16-bits of memory source/destination address for DMA master channel 6 */ -#define USB_DMA6_ADDRHIGH 0xFFC03CCC /* Upper 16-bits of memory source/destination address for DMA master channel 6 */ -#define USB_DMA6_COUNTLOW 0xFFC03CD0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 6 */ -#define USB_DMA6_COUNTHIGH 0xFFC03CD4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 6 */ -#define USB_DMA7_CONTROL 0xFFC03CE4 /* DMA master channel 7 configuration */ -#define USB_DMA7_ADDRLOW 0xFFC03CE8 /* Lower 16-bits of memory source/destination address for DMA master channel 7 */ -#define USB_DMA7_ADDRHIGH 0xFFC03CEC /* Upper 16-bits of memory source/destination address for DMA master channel 7 */ -#define USB_DMA7_COUNTLOW 0xFFC03CF0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 7 */ -#define USB_DMA7_COUNTHIGH 0xFFC03CF4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 7 */ #endif /* __BFIN_DEF_ADSP_BF526_proc__ */ diff --git a/arch/blackfin/include/asm/mach-bf533/BF531_def.h b/arch/blackfin/include/asm/mach-bf533/BF531_def.h index 5d61972..3b61aaf 100644 --- a/arch/blackfin/include/asm/mach-bf533/BF531_def.h +++ b/arch/blackfin/include/asm/mach-bf533/BF531_def.h @@ -438,12 +438,6 @@ #define L1_INST_SRAM 0xFFA08000 /* 0xFFA08000 -> 0xFFA0BFFF Instruction Bank A SRAM */ #define L1_INST_SRAM_SIZE (0xFFA0BFFF - 0xFFA08000 + 1) #define L1_INST_SRAM_END (L1_INST_SRAM + L1_INST_SRAM_SIZE) -#define L1_SRAM_SCRATCH 0xFFB00000 /* 0xFFB00000 -> 0xFFB00FFF Scratchpad SRAM */ -#define L1_SRAM_SCRATCH_SIZE (0xFFB00FFF - 0xFFB00000 + 1) -#define L1_SRAM_SCRATCH_END (L1_SRAM_SCRATCH + L1_SRAM_SCRATCH_SIZE) -#define SYSMMR_BASE 0xFFC00000 /* 0xFFC00000 -> 0xFFFFFFFF MMR registers */ -#define SYSMMR_BASE_SIZE (0xFFFFFFFF - 0xFFC00000 + 1) -#define SYSMMR_BASE_END (SYSMMR_BASE + SYSMMR_BASE_SIZE) #endif #endif /* __BFIN_DEF_ADSP_BF531_proc__ */ diff --git a/arch/blackfin/include/asm/mach-bf533/BF532_def.h b/arch/blackfin/include/asm/mach-bf533/BF532_def.h index f7378b7..64f55f5 100644 --- a/arch/blackfin/include/asm/mach-bf533/BF532_def.h +++ b/arch/blackfin/include/asm/mach-bf533/BF532_def.h @@ -12,12 +12,6 @@ #define L1_INST_SRAM 0xFFA08000 /* 0xFFA08000 -> 0xFFA0BFFF Instruction Bank A SRAM */ #define L1_INST_SRAM_SIZE (0xFFA0BFFF - 0xFFA08000 + 1) #define L1_INST_SRAM_END (L1_INST_SRAM + L1_INST_SRAM_SIZE) -#define L1_SRAM_SCRATCH 0xFFB00000 /* 0xFFB00000 -> 0xFFB00FFF Scratchpad SRAM */ -#define L1_SRAM_SCRATCH_SIZE (0xFFB00FFF - 0xFFB00000 + 1) -#define L1_SRAM_SCRATCH_END (L1_SRAM_SCRATCH + L1_SRAM_SCRATCH_SIZE) -#define SYSMMR_BASE 0xFFC00000 /* 0xFFC00000 -> 0xFFFFFFFF MMR registers */ -#define SYSMMR_BASE_SIZE (0xFFFFFFFF - 0xFFC00000 + 1) -#define SYSMMR_BASE_END (SYSMMR_BASE + SYSMMR_BASE_SIZE) #endif #endif /* __BFIN_DEF_ADSP_BF532_proc__ */ diff --git a/arch/blackfin/include/asm/mach-bf533/BF533_def.h b/arch/blackfin/include/asm/mach-bf533/BF533_def.h index b77efe0..3c0595f 100644 --- a/arch/blackfin/include/asm/mach-bf533/BF533_def.h +++ b/arch/blackfin/include/asm/mach-bf533/BF533_def.h @@ -17,11 +17,5 @@ #define L1_INST_SRAM 0xFFA00000 /* 0xFFA00000 -> 0xFFA07FFF Instruction Bank A SRAM */ #define L1_INST_SRAM_SIZE (0xFFA07FFF - 0xFFA00000 + 1) #define L1_INST_SRAM_END (L1_INST_SRAM + L1_INST_SRAM_SIZE) -#define L1_SRAM_SCRATCH 0xFFB00000 /* 0xFFB00000 -> 0xFFB00FFF Scratchpad SRAM */ -#define L1_SRAM_SCRATCH_SIZE (0xFFB00FFF - 0xFFB00000 + 1) -#define L1_SRAM_SCRATCH_END (L1_SRAM_SCRATCH + L1_SRAM_SCRATCH_SIZE) -#define SYSMMR_BASE 0xFFC00000 /* 0xFFC00000 -> 0xFFFFFFFF MMR registers */ -#define SYSMMR_BASE_SIZE (0xFFFFFFFF - 0xFFC00000 + 1) -#define SYSMMR_BASE_END (SYSMMR_BASE + SYSMMR_BASE_SIZE) #endif /* __BFIN_DEF_ADSP_BF533_proc__ */ diff --git a/arch/blackfin/include/asm/mach-bf537/ADSP-EDN-BF534-extended_cdef.h b/arch/blackfin/include/asm/mach-bf537/ADSP-EDN-BF534-extended_cdef.h deleted file mode 100644 index bfe6d9f..0000000 --- a/arch/blackfin/include/asm/mach-bf537/ADSP-EDN-BF534-extended_cdef.h +++ /dev/null @@ -1,1624 +0,0 @@ -/* DO NOT EDIT THIS FILE - * Automatically generated by generate-cdef-headers.xsl - * DO NOT EDIT THIS FILE - */ - -#ifndef __BFIN_CDEF_ADSP_EDN_BF534_extended__ -#define __BFIN_CDEF_ADSP_EDN_BF534_extended__ - -#include "../mach-common/ADSP-EDN-core_cdef.h" - -#define bfin_read_PLL_CTL() bfin_read16(PLL_CTL) -#define bfin_write_PLL_CTL(val) bfin_write16(PLL_CTL, val) -#define bfin_read_PLL_DIV() bfin_read16(PLL_DIV) -#define bfin_write_PLL_DIV(val) bfin_write16(PLL_DIV, val) -#define bfin_read_VR_CTL() bfin_read16(VR_CTL) -#define bfin_write_VR_CTL(val) bfin_write16(VR_CTL, val) -#define bfin_read_PLL_STAT() bfin_read16(PLL_STAT) -#define bfin_write_PLL_STAT(val) bfin_write16(PLL_STAT, val) -#define bfin_read_PLL_LOCKCNT() bfin_read16(PLL_LOCKCNT) -#define bfin_write_PLL_LOCKCNT(val) bfin_write16(PLL_LOCKCNT, val) -#define bfin_read_SWRST() bfin_read16(SWRST) -#define bfin_write_SWRST(val) bfin_write16(SWRST, val) -#define bfin_read_SYSCR() bfin_read16(SYSCR) -#define bfin_write_SYSCR(val) bfin_write16(SYSCR, val) -#define bfin_read_SIC_RVECT() bfin_read16(SIC_RVECT) -#define bfin_write_SIC_RVECT(val) bfin_write16(SIC_RVECT, val) -#define bfin_read_SIC_IMASK() bfin_read32(SIC_IMASK) -#define bfin_write_SIC_IMASK(val) bfin_write32(SIC_IMASK, val) -#define bfin_read_SIC_IAR0() bfin_read32(SIC_IAR0) -#define bfin_write_SIC_IAR0(val) bfin_write32(SIC_IAR0, val) -#define bfin_read_SIC_IAR1() bfin_read32(SIC_IAR1) -#define bfin_write_SIC_IAR1(val) bfin_write32(SIC_IAR1, val) -#define bfin_read_SIC_IAR2() bfin_read32(SIC_IAR2) -#define bfin_write_SIC_IAR2(val) bfin_write32(SIC_IAR2, val) -#define bfin_read_SIC_IAR3() bfin_read32(SIC_IAR3) -#define bfin_write_SIC_IAR3(val) bfin_write32(SIC_IAR3, val) -#define bfin_read_SIC_ISR() bfin_read32(SIC_ISR) -#define bfin_write_SIC_ISR(val) bfin_write32(SIC_ISR, val) -#define bfin_read_SIC_IWR() bfin_read32(SIC_IWR) -#define bfin_write_SIC_IWR(val) bfin_write32(SIC_IWR, val) -#define bfin_read_WDOG_CTL() bfin_read16(WDOG_CTL) -#define bfin_write_WDOG_CTL(val) bfin_write16(WDOG_CTL, val) -#define bfin_read_WDOG_CNT() bfin_read32(WDOG_CNT) -#define bfin_write_WDOG_CNT(val) bfin_write32(WDOG_CNT, val) -#define bfin_read_WDOG_STAT() bfin_read32(WDOG_STAT) -#define bfin_write_WDOG_STAT(val) bfin_write32(WDOG_STAT, val) -#define bfin_read_RTC_STAT() bfin_read32(RTC_STAT) -#define bfin_write_RTC_STAT(val) bfin_write32(RTC_STAT, val) -#define bfin_read_RTC_ICTL() bfin_read16(RTC_ICTL) -#define bfin_write_RTC_ICTL(val) bfin_write16(RTC_ICTL, val) -#define bfin_read_RTC_ISTAT() bfin_read16(RTC_ISTAT) -#define bfin_write_RTC_ISTAT(val) bfin_write16(RTC_ISTAT, val) -#define bfin_read_RTC_SWCNT() bfin_read16(RTC_SWCNT) -#define bfin_write_RTC_SWCNT(val) bfin_write16(RTC_SWCNT, val) -#define bfin_read_RTC_ALARM() bfin_read32(RTC_ALARM) -#define bfin_write_RTC_ALARM(val) bfin_write32(RTC_ALARM, val) -#define bfin_read_RTC_PREN() bfin_read16(RTC_PREN) -#define bfin_write_RTC_PREN(val) bfin_write16(RTC_PREN, val) -#define bfin_read_UART0_THR() bfin_read16(UART0_THR) -#define bfin_write_UART0_THR(val) bfin_write16(UART0_THR, val) -#define bfin_read_UART0_RBR() bfin_read16(UART0_RBR) -#define bfin_write_UART0_RBR(val) bfin_write16(UART0_RBR, val) -#define bfin_read_UART0_DLL() bfin_read16(UART0_DLL) -#define bfin_write_UART0_DLL(val) bfin_write16(UART0_DLL, val) -#define bfin_read_UART0_IER() bfin_read16(UART0_IER) -#define bfin_write_UART0_IER(val) bfin_write16(UART0_IER, val) -#define bfin_read_UART0_DLH() bfin_read16(UART0_DLH) -#define bfin_write_UART0_DLH(val) bfin_write16(UART0_DLH, val) -#define bfin_read_UART0_IIR() bfin_read16(UART0_IIR) -#define bfin_write_UART0_IIR(val) bfin_write16(UART0_IIR, val) -#define bfin_read_UART0_LCR() bfin_read16(UART0_LCR) -#define bfin_write_UART0_LCR(val) bfin_write16(UART0_LCR, val) -#define bfin_read_UART0_MCR() bfin_read16(UART0_MCR) -#define bfin_write_UART0_MCR(val) bfin_write16(UART0_MCR, val) -#define bfin_read_UART0_LSR() bfin_read16(UART0_LSR) -#define bfin_write_UART0_LSR(val) bfin_write16(UART0_LSR, val) -#define bfin_read_UART0_MSR() bfin_read16(UART0_MSR) -#define bfin_write_UART0_MSR(val) bfin_write16(UART0_MSR, val) -#define bfin_read_UART0_SCR() bfin_read16(UART0_SCR) -#define bfin_write_UART0_SCR(val) bfin_write16(UART0_SCR, val) -#define bfin_read_UART0_GCTL() bfin_read16(UART0_GCTL) -#define bfin_write_UART0_GCTL(val) bfin_write16(UART0_GCTL, val) -#define bfin_read_SPI_CTL() bfin_read16(SPI_CTL) -#define bfin_write_SPI_CTL(val) bfin_write16(SPI_CTL, val) -#define bfin_read_SPI_FLG() bfin_read16(SPI_FLG) -#define bfin_write_SPI_FLG(val) bfin_write16(SPI_FLG, val) -#define bfin_read_SPI_STAT() bfin_read16(SPI_STAT) -#define bfin_write_SPI_STAT(val) bfin_write16(SPI_STAT, val) -#define bfin_read_SPI_TDBR() bfin_read16(SPI_TDBR) -#define bfin_write_SPI_TDBR(val) bfin_write16(SPI_TDBR, val) -#define bfin_read_SPI_RDBR() bfin_read16(SPI_RDBR) -#define bfin_write_SPI_RDBR(val) bfin_write16(SPI_RDBR, val) -#define bfin_read_SPI_BAUD() bfin_read16(SPI_BAUD) -#define bfin_write_SPI_BAUD(val) bfin_write16(SPI_BAUD, val) -#define bfin_read_SPI_SHADOW() bfin_read16(SPI_SHADOW) -#define bfin_write_SPI_SHADOW(val) bfin_write16(SPI_SHADOW, val) -#define bfin_read_TIMER0_CONFIG() bfin_read16(TIMER0_CONFIG) -#define bfin_write_TIMER0_CONFIG(val) bfin_write16(TIMER0_CONFIG, val) -#define bfin_read_TIMER0_COUNTER() bfin_read32(TIMER0_COUNTER) -#define bfin_write_TIMER0_COUNTER(val) bfin_write32(TIMER0_COUNTER, val) -#define bfin_read_TIMER0_PERIOD() bfin_read32(TIMER0_PERIOD) -#define bfin_write_TIMER0_PERIOD(val) bfin_write32(TIMER0_PERIOD, val) -#define bfin_read_TIMER0_WIDTH() bfin_read32(TIMER0_WIDTH) -#define bfin_write_TIMER0_WIDTH(val) bfin_write32(TIMER0_WIDTH, val) -#define bfin_read_TIMER1_CONFIG() bfin_read16(TIMER1_CONFIG) -#define bfin_write_TIMER1_CONFIG(val) bfin_write16(TIMER1_CONFIG, val) -#define bfin_read_TIMER1_COUNTER() bfin_read32(TIMER1_COUNTER) -#define bfin_write_TIMER1_COUNTER(val) bfin_write32(TIMER1_COUNTER, val) -#define bfin_read_TIMER1_PERIOD() bfin_read32(TIMER1_PERIOD) -#define bfin_write_TIMER1_PERIOD(val) bfin_write32(TIMER1_PERIOD, val) -#define bfin_read_TIMER1_WIDTH() bfin_read32(TIMER1_WIDTH) -#define bfin_write_TIMER1_WIDTH(val) bfin_write32(TIMER1_WIDTH, val) -#define bfin_read_TIMER2_CONFIG() bfin_read16(TIMER2_CONFIG) -#define bfin_write_TIMER2_CONFIG(val) bfin_write16(TIMER2_CONFIG, val) -#define bfin_read_TIMER2_COUNTER() bfin_read32(TIMER2_COUNTER) -#define bfin_write_TIMER2_COUNTER(val) bfin_write32(TIMER2_COUNTER, val) -#define bfin_read_TIMER2_PERIOD() bfin_read32(TIMER2_PERIOD) -#define bfin_write_TIMER2_PERIOD(val) bfin_write32(TIMER2_PERIOD, val) -#define bfin_read_TIMER2_WIDTH() bfin_read32(TIMER2_WIDTH) -#define bfin_write_TIMER2_WIDTH(val) bfin_write32(TIMER2_WIDTH, val) -#define bfin_read_TIMER3_CONFIG() bfin_read16(TIMER3_CONFIG) -#define bfin_write_TIMER3_CONFIG(val) bfin_write16(TIMER3_CONFIG, val) -#define bfin_read_TIMER3_COUNTER() bfin_read32(TIMER3_COUNTER) -#define bfin_write_TIMER3_COUNTER(val) bfin_write32(TIMER3_COUNTER, val) -#define bfin_read_TIMER3_PERIOD() bfin_read32(TIMER3_PERIOD) -#define bfin_write_TIMER3_PERIOD(val) bfin_write32(TIMER3_PERIOD, val) -#define bfin_read_TIMER3_WIDTH() bfin_read32(TIMER3_WIDTH) -#define bfin_write_TIMER3_WIDTH(val) bfin_write32(TIMER3_WIDTH, val) -#define bfin_read_TIMER4_CONFIG() bfin_read16(TIMER4_CONFIG) -#define bfin_write_TIMER4_CONFIG(val) bfin_write16(TIMER4_CONFIG, val) -#define bfin_read_TIMER4_COUNTER() bfin_read32(TIMER4_COUNTER) -#define bfin_write_TIMER4_COUNTER(val) bfin_write32(TIMER4_COUNTER, val) -#define bfin_read_TIMER4_PERIOD() bfin_read32(TIMER4_PERIOD) -#define bfin_write_TIMER4_PERIOD(val) bfin_write32(TIMER4_PERIOD, val) -#define bfin_read_TIMER4_WIDTH() bfin_read32(TIMER4_WIDTH) -#define bfin_write_TIMER4_WIDTH(val) bfin_write32(TIMER4_WIDTH, val) -#define bfin_read_TIMER5_CONFIG() bfin_read16(TIMER5_CONFIG) -#define bfin_write_TIMER5_CONFIG(val) bfin_write16(TIMER5_CONFIG, val) -#define bfin_read_TIMER5_COUNTER() bfin_read32(TIMER5_COUNTER) -#define bfin_write_TIMER5_COUNTER(val) bfin_write32(TIMER5_COUNTER, val) -#define bfin_read_TIMER5_PERIOD() bfin_read32(TIMER5_PERIOD) -#define bfin_write_TIMER5_PERIOD(val) bfin_write32(TIMER5_PERIOD, val) -#define bfin_read_TIMER5_WIDTH() bfin_read32(TIMER5_WIDTH) -#define bfin_write_TIMER5_WIDTH(val) bfin_write32(TIMER5_WIDTH, val) -#define bfin_read_TIMER6_CONFIG() bfin_read16(TIMER6_CONFIG) -#define bfin_write_TIMER6_CONFIG(val) bfin_write16(TIMER6_CONFIG, val) -#define bfin_read_TIMER6_COUNTER() bfin_read32(TIMER6_COUNTER) -#define bfin_write_TIMER6_COUNTER(val) bfin_write32(TIMER6_COUNTER, val) -#define bfin_read_TIMER6_PERIOD() bfin_read32(TIMER6_PERIOD) -#define bfin_write_TIMER6_PERIOD(val) bfin_write32(TIMER6_PERIOD, val) -#define bfin_read_TIMER6_WIDTH() bfin_read32(TIMER6_WIDTH) -#define bfin_write_TIMER6_WIDTH(val) bfin_write32(TIMER6_WIDTH, val) -#define bfin_read_TIMER7_CONFIG() bfin_read16(TIMER7_CONFIG) -#define bfin_write_TIMER7_CONFIG(val) bfin_write16(TIMER7_CONFIG, val) -#define bfin_read_TIMER7_COUNTER() bfin_read32(TIMER7_COUNTER) -#define bfin_write_TIMER7_COUNTER(val) bfin_write32(TIMER7_COUNTER, val) -#define bfin_read_TIMER7_PERIOD() bfin_read32(TIMER7_PERIOD) -#define bfin_write_TIMER7_PERIOD(val) bfin_write32(TIMER7_PERIOD, val) -#define bfin_read_TIMER7_WIDTH() bfin_read32(TIMER7_WIDTH) -#define bfin_write_TIMER7_WIDTH(val) bfin_write32(TIMER7_WIDTH, val) -#define bfin_read_TIMER_ENABLE() bfin_read16(TIMER_ENABLE) -#define bfin_write_TIMER_ENABLE(val) bfin_write16(TIMER_ENABLE, val) -#define bfin_read_TIMER_DISABLE() bfin_read16(TIMER_DISABLE) -#define bfin_write_TIMER_DISABLE(val) bfin_write16(TIMER_DISABLE, val) -#define bfin_read_TIMER_STATUS() bfin_read32(TIMER_STATUS) -#define bfin_write_TIMER_STATUS(val) bfin_write32(TIMER_STATUS, val) -#define bfin_read_PORTFIO() bfin_read16(PORTFIO) -#define bfin_write_PORTFIO(val) bfin_write16(PORTFIO, val) -#define bfin_read_PORTFIO_CLEAR() bfin_read16(PORTFIO_CLEAR) -#define bfin_write_PORTFIO_CLEAR(val) bfin_write16(PORTFIO_CLEAR, val) -#define bfin_read_PORTFIO_SET() bfin_read16(PORTFIO_SET) -#define bfin_write_PORTFIO_SET(val) bfin_write16(PORTFIO_SET, val) -#define bfin_read_PORTFIO_TOGGLE() bfin_read16(PORTFIO_TOGGLE) -#define bfin_write_PORTFIO_TOGGLE(val) bfin_write16(PORTFIO_TOGGLE, val) -#define bfin_read_PORTFIO_MASKA() bfin_read16(PORTFIO_MASKA) -#define bfin_write_PORTFIO_MASKA(val) bfin_write16(PORTFIO_MASKA, val) -#define bfin_read_PORTFIO_MASKA_CLEAR() bfin_read16(PORTFIO_MASKA_CLEAR) -#define bfin_write_PORTFIO_MASKA_CLEAR(val) bfin_write16(PORTFIO_MASKA_CLEAR, val) -#define bfin_read_PORTFIO_MASKA_SET() bfin_read16(PORTFIO_MASKA_SET) -#define bfin_write_PORTFIO_MASKA_SET(val) bfin_write16(PORTFIO_MASKA_SET, val) -#define bfin_read_PORTFIO_MASKA_TOGGLE() bfin_read16(PORTFIO_MASKA_TOGGLE) -#define bfin_write_PORTFIO_MASKA_TOGGLE(val) bfin_write16(PORTFIO_MASKA_TOGGLE, val) -#define bfin_read_PORTFIO_MASKB() bfin_read16(PORTFIO_MASKB) -#define bfin_write_PORTFIO_MASKB(val) bfin_write16(PORTFIO_MASKB, val) -#define bfin_read_PORTFIO_MASKB_CLEAR() bfin_read16(PORTFIO_MASKB_CLEAR) -#define bfin_write_PORTFIO_MASKB_CLEAR(val) bfin_write16(PORTFIO_MASKB_CLEAR, val) -#define bfin_read_PORTFIO_MASKB_SET() bfin_read16(PORTFIO_MASKB_SET) -#define bfin_write_PORTFIO_MASKB_SET(val) bfin_write16(PORTFIO_MASKB_SET, val) -#define bfin_read_PORTFIO_MASKB_TOGGLE() bfin_read16(PORTFIO_MASKB_TOGGLE) -#define bfin_write_PORTFIO_MASKB_TOGGLE(val) bfin_write16(PORTFIO_MASKB_TOGGLE, val) -#define bfin_read_PORTFIO_DIR() bfin_read16(PORTFIO_DIR) -#define bfin_write_PORTFIO_DIR(val) bfin_write16(PORTFIO_DIR, val) -#define bfin_read_PORTFIO_POLAR() bfin_read16(PORTFIO_POLAR) -#define bfin_write_PORTFIO_POLAR(val) bfin_write16(PORTFIO_POLAR, val) -#define bfin_read_PORTFIO_EDGE() bfin_read16(PORTFIO_EDGE) -#define bfin_write_PORTFIO_EDGE(val) bfin_write16(PORTFIO_EDGE, val) -#define bfin_read_PORTFIO_BOTH() bfin_read16(PORTFIO_BOTH) -#define bfin_write_PORTFIO_BOTH(val) bfin_write16(PORTFIO_BOTH, val) -#define bfin_read_PORTFIO_INEN() bfin_read16(PORTFIO_INEN) -#define bfin_write_PORTFIO_INEN(val) bfin_write16(PORTFIO_INEN, val) -#define bfin_read_SPORT0_TCR1() bfin_read16(SPORT0_TCR1) -#define bfin_write_SPORT0_TCR1(val) bfin_write16(SPORT0_TCR1, val) -#define bfin_read_SPORT0_TCR2() bfin_read16(SPORT0_TCR2) -#define bfin_write_SPORT0_TCR2(val) bfin_write16(SPORT0_TCR2, val) -#define bfin_read_SPORT0_TCLKDIV() bfin_read16(SPORT0_TCLKDIV) -#define bfin_write_SPORT0_TCLKDIV(val) bfin_write16(SPORT0_TCLKDIV, val) -#define bfin_read_SPORT0_TFSDIV() bfin_read16(SPORT0_TFSDIV) -#define bfin_write_SPORT0_TFSDIV(val) bfin_write16(SPORT0_TFSDIV, val) -#define bfin_write_SPORT0_TX(val) bfin_write32(SPORT0_TX, val) -#define bfin_read_SPORT0_RX() bfin_read32(SPORT0_RX) -#define bfin_write_SPORT0_RX(val) bfin_write32(SPORT0_RX, val) -#define bfin_read_SPORT0_RCR1() bfin_read16(SPORT0_RCR1) -#define bfin_write_SPORT0_RCR1(val) bfin_write16(SPORT0_RCR1, val) -#define bfin_read_SPORT0_RCR2() bfin_read16(SPORT0_RCR2) -#define bfin_write_SPORT0_RCR2(val) bfin_write16(SPORT0_RCR2, val) -#define bfin_read_SPORT0_RCLKDIV() bfin_read16(SPORT0_RCLKDIV) -#define bfin_write_SPORT0_RCLKDIV(val) bfin_write16(SPORT0_RCLKDIV, val) -#define bfin_read_SPORT0_RFSDIV() bfin_read16(SPORT0_RFSDIV) -#define bfin_write_SPORT0_RFSDIV(val) bfin_write16(SPORT0_RFSDIV, val) -#define bfin_read_SPORT0_STAT() bfin_read16(SPORT0_STAT) -#define bfin_write_SPORT0_STAT(val) bfin_write16(SPORT0_STAT, val) -#define bfin_read_SPORT0_CHNL() bfin_read16(SPORT0_CHNL) -#define bfin_write_SPORT0_CHNL(val) bfin_write16(SPORT0_CHNL, val) -#define bfin_read_SPORT0_MCMC1() bfin_read16(SPORT0_MCMC1) -#define bfin_write_SPORT0_MCMC1(val) bfin_write16(SPORT0_MCMC1, val) -#define bfin_read_SPORT0_MCMC2() bfin_read16(SPORT0_MCMC2) -#define bfin_write_SPORT0_MCMC2(val) bfin_write16(SPORT0_MCMC2, val) -#define bfin_read_SPORT0_MTCS0() bfin_read32(SPORT0_MTCS0) -#define bfin_write_SPORT0_MTCS0(val) bfin_write32(SPORT0_MTCS0, val) -#define bfin_read_SPORT0_MTCS1() bfin_read32(SPORT0_MTCS1) -#define bfin_write_SPORT0_MTCS1(val) bfin_write32(SPORT0_MTCS1, val) -#define bfin_read_SPORT0_MTCS2() bfin_read32(SPORT0_MTCS2) -#define bfin_write_SPORT0_MTCS2(val) bfin_write32(SPORT0_MTCS2, val) -#define bfin_read_SPORT0_MTCS3() bfin_read32(SPORT0_MTCS3) -#define bfin_write_SPORT0_MTCS3(val) bfin_write32(SPORT0_MTCS3, val) -#define bfin_read_SPORT0_MRCS0() bfin_read32(SPORT0_MRCS0) -#define bfin_write_SPORT0_MRCS0(val) bfin_write32(SPORT0_MRCS0, val) -#define bfin_read_SPORT0_MRCS1() bfin_read32(SPORT0_MRCS1) -#define bfin_write_SPORT0_MRCS1(val) bfin_write32(SPORT0_MRCS1, val) -#define bfin_read_SPORT0_MRCS2() bfin_read32(SPORT0_MRCS2) -#define bfin_write_SPORT0_MRCS2(val) bfin_write32(SPORT0_MRCS2, val) -#define bfin_read_SPORT0_MRCS3() bfin_read32(SPORT0_MRCS3) -#define bfin_write_SPORT0_MRCS3(val) bfin_write32(SPORT0_MRCS3, val) -#define bfin_read_SPORT1_TCR1() bfin_read16(SPORT1_TCR1) -#define bfin_write_SPORT1_TCR1(val) bfin_write16(SPORT1_TCR1, val) -#define bfin_read_SPORT1_TCR2() bfin_read16(SPORT1_TCR2) -#define bfin_write_SPORT1_TCR2(val) bfin_write16(SPORT1_TCR2, val) -#define bfin_read_SPORT1_TCLKDIV() bfin_read16(SPORT1_TCLKDIV) -#define bfin_write_SPORT1_TCLKDIV(val) bfin_write16(SPORT1_TCLKDIV, val) -#define bfin_read_SPORT1_TFSDIV() bfin_read16(SPORT1_TFSDIV) -#define bfin_write_SPORT1_TFSDIV(val) bfin_write16(SPORT1_TFSDIV, val) -#define bfin_write_SPORT1_TX(val) bfin_write32(SPORT1_TX, val) -#define bfin_read_SPORT1_RX() bfin_read32(SPORT1_RX) -#define bfin_write_SPORT1_RX(val) bfin_write32(SPORT1_RX, val) -#define bfin_read_SPORT1_RCR1() bfin_read16(SPORT1_RCR1) -#define bfin_write_SPORT1_RCR1(val) bfin_write16(SPORT1_RCR1, val) -#define bfin_read_SPORT1_RCR2() bfin_read16(SPORT1_RCR2) -#define bfin_write_SPORT1_RCR2(val) bfin_write16(SPORT1_RCR2, val) -#define bfin_read_SPORT1_RCLKDIV() bfin_read16(SPORT1_RCLKDIV) -#define bfin_write_SPORT1_RCLKDIV(val) bfin_write16(SPORT1_RCLKDIV, val) -#define bfin_read_SPORT1_RFSDIV() bfin_read16(SPORT1_RFSDIV) -#define bfin_write_SPORT1_RFSDIV(val) bfin_write16(SPORT1_RFSDIV, val) -#define bfin_read_SPORT1_STAT() bfin_read16(SPORT1_STAT) -#define bfin_write_SPORT1_STAT(val) bfin_write16(SPORT1_STAT, val) -#define bfin_read_SPORT1_CHNL() bfin_read16(SPORT1_CHNL) -#define bfin_write_SPORT1_CHNL(val) bfin_write16(SPORT1_CHNL, val) -#define bfin_read_SPORT1_MCMC1() bfin_read16(SPORT1_MCMC1) -#define bfin_write_SPORT1_MCMC1(val) bfin_write16(SPORT1_MCMC1, val) -#define bfin_read_SPORT1_MCMC2() bfin_read16(SPORT1_MCMC2) -#define bfin_write_SPORT1_MCMC2(val) bfin_write16(SPORT1_MCMC2, val) -#define bfin_read_SPORT1_MTCS0() bfin_read32(SPORT1_MTCS0) -#define bfin_write_SPORT1_MTCS0(val) bfin_write32(SPORT1_MTCS0, val) -#define bfin_read_SPORT1_MTCS1() bfin_read32(SPORT1_MTCS1) -#define bfin_write_SPORT1_MTCS1(val) bfin_write32(SPORT1_MTCS1, val) -#define bfin_read_SPORT1_MTCS2() bfin_read32(SPORT1_MTCS2) -#define bfin_write_SPORT1_MTCS2(val) bfin_write32(SPORT1_MTCS2, val) -#define bfin_read_SPORT1_MTCS3() bfin_read32(SPORT1_MTCS3) -#define bfin_write_SPORT1_MTCS3(val) bfin_write32(SPORT1_MTCS3, val) -#define bfin_read_SPORT1_MRCS0() bfin_read32(SPORT1_MRCS0) -#define bfin_write_SPORT1_MRCS0(val) bfin_write32(SPORT1_MRCS0, val) -#define bfin_read_SPORT1_MRCS1() bfin_read32(SPORT1_MRCS1) -#define bfin_write_SPORT1_MRCS1(val) bfin_write32(SPORT1_MRCS1, val) -#define bfin_read_SPORT1_MRCS2() bfin_read32(SPORT1_MRCS2) -#define bfin_write_SPORT1_MRCS2(val) bfin_write32(SPORT1_MRCS2, val) -#define bfin_read_SPORT1_MRCS3() bfin_read32(SPORT1_MRCS3) -#define bfin_write_SPORT1_MRCS3(val) bfin_write32(SPORT1_MRCS3, val) -#define bfin_read_EBIU_AMGCTL() bfin_read16(EBIU_AMGCTL) -#define bfin_write_EBIU_AMGCTL(val) bfin_write16(EBIU_AMGCTL, val) -#define bfin_read_EBIU_AMBCTL0() bfin_read32(EBIU_AMBCTL0) -#define bfin_write_EBIU_AMBCTL0(val) bfin_write32(EBIU_AMBCTL0, val) -#define bfin_read_EBIU_AMBCTL1() bfin_read32(EBIU_AMBCTL1) -#define bfin_write_EBIU_AMBCTL1(val) bfin_write32(EBIU_AMBCTL1, val) -#define bfin_read_EBIU_SDGCTL() bfin_read32(EBIU_SDGCTL) -#define bfin_write_EBIU_SDGCTL(val) bfin_write32(EBIU_SDGCTL, val) -#define bfin_read_EBIU_SDBCTL() bfin_read16(EBIU_SDBCTL) -#define bfin_write_EBIU_SDBCTL(val) bfin_write16(EBIU_SDBCTL, val) -#define bfin_read_EBIU_SDRRC() bfin_read16(EBIU_SDRRC) -#define bfin_write_EBIU_SDRRC(val) bfin_write16(EBIU_SDRRC, val) -#define bfin_read_EBIU_SDSTAT() bfin_read16(EBIU_SDSTAT) -#define bfin_write_EBIU_SDSTAT(val) bfin_write16(EBIU_SDSTAT, val) -#define bfin_read_DMA0_NEXT_DESC_PTR() bfin_readPTR(DMA0_NEXT_DESC_PTR) -#define bfin_write_DMA0_NEXT_DESC_PTR(val) bfin_writePTR(DMA0_NEXT_DESC_PTR, val) -#define bfin_read_DMA0_START_ADDR() bfin_readPTR(DMA0_START_ADDR) -#define bfin_write_DMA0_START_ADDR(val) bfin_writePTR(DMA0_START_ADDR, val) -#define bfin_read_DMA0_CONFIG() bfin_read16(DMA0_CONFIG) -#define bfin_write_DMA0_CONFIG(val) bfin_write16(DMA0_CONFIG, val) -#define bfin_read_DMA0_X_COUNT() bfin_read16(DMA0_X_COUNT) -#define bfin_write_DMA0_X_COUNT(val) bfin_write16(DMA0_X_COUNT, val) -#define bfin_read_DMA0_X_MODIFY() bfin_read16(DMA0_X_MODIFY) -#define bfin_write_DMA0_X_MODIFY(val) bfin_write16(DMA0_X_MODIFY, val) -#define bfin_read_DMA0_Y_COUNT() bfin_read16(DMA0_Y_COUNT) -#define bfin_write_DMA0_Y_COUNT(val) bfin_write16(DMA0_Y_COUNT, val) -#define bfin_read_DMA0_Y_MODIFY() bfin_read16(DMA0_Y_MODIFY) -#define bfin_write_DMA0_Y_MODIFY(val) bfin_write16(DMA0_Y_MODIFY, val) -#define bfin_read_DMA0_CURR_DESC_PTR() bfin_readPTR(DMA0_CURR_DESC_PTR) -#define bfin_write_DMA0_CURR_DESC_PTR(val) bfin_writePTR(DMA0_CURR_DESC_PTR, val) -#define bfin_read_DMA0_CURR_ADDR() bfin_readPTR(DMA0_CURR_ADDR) -#define bfin_write_DMA0_CURR_ADDR(val) bfin_writePTR(DMA0_CURR_ADDR, val) -#define bfin_read_DMA0_IRQ_STATUS() bfin_read16(DMA0_IRQ_STATUS) -#define bfin_write_DMA0_IRQ_STATUS(val) bfin_write16(DMA0_IRQ_STATUS, val) -#define bfin_read_DMA0_PERIPHERAL_MAP() bfin_read16(DMA0_PERIPHERAL_MAP) -#define bfin_write_DMA0_PERIPHERAL_MAP(val) bfin_write16(DMA0_PERIPHERAL_MAP, val) -#define bfin_read_DMA0_CURR_X_COUNT() bfin_read16(DMA0_CURR_X_COUNT) -#define bfin_write_DMA0_CURR_X_COUNT(val) bfin_write16(DMA0_CURR_X_COUNT, val) -#define bfin_read_DMA0_CURR_Y_COUNT() bfin_read16(DMA0_CURR_Y_COUNT) -#define bfin_write_DMA0_CURR_Y_COUNT(val) bfin_write16(DMA0_CURR_Y_COUNT, val) -#define bfin_read_DMA1_NEXT_DESC_PTR() bfin_readPTR(DMA1_NEXT_DESC_PTR) -#define bfin_write_DMA1_NEXT_DESC_PTR(val) bfin_writePTR(DMA1_NEXT_DESC_PTR, val) -#define bfin_read_DMA1_START_ADDR() bfin_readPTR(DMA1_START_ADDR) -#define bfin_write_DMA1_START_ADDR(val) bfin_writePTR(DMA1_START_ADDR, val) -#define bfin_read_DMA1_CONFIG() bfin_read16(DMA1_CONFIG) -#define bfin_write_DMA1_CONFIG(val) bfin_write16(DMA1_CONFIG, val) -#define bfin_read_DMA1_X_COUNT() bfin_read16(DMA1_X_COUNT) -#define bfin_write_DMA1_X_COUNT(val) bfin_write16(DMA1_X_COUNT, val) -#define bfin_read_DMA1_X_MODIFY() bfin_read16(DMA1_X_MODIFY) -#define bfin_write_DMA1_X_MODIFY(val) bfin_write16(DMA1_X_MODIFY, val) -#define bfin_read_DMA1_Y_COUNT() bfin_read16(DMA1_Y_COUNT) -#define bfin_write_DMA1_Y_COUNT(val) bfin_write16(DMA1_Y_COUNT, val) -#define bfin_read_DMA1_Y_MODIFY() bfin_read16(DMA1_Y_MODIFY) -#define bfin_write_DMA1_Y_MODIFY(val) bfin_write16(DMA1_Y_MODIFY, val) -#define bfin_read_DMA1_CURR_DESC_PTR() bfin_readPTR(DMA1_CURR_DESC_PTR) -#define bfin_write_DMA1_CURR_DESC_PTR(val) bfin_writePTR(DMA1_CURR_DESC_PTR, val) -#define bfin_read_DMA1_CURR_ADDR() bfin_readPTR(DMA1_CURR_ADDR) -#define bfin_write_DMA1_CURR_ADDR(val) bfin_writePTR(DMA1_CURR_ADDR, val) -#define bfin_read_DMA1_IRQ_STATUS() bfin_read16(DMA1_IRQ_STATUS) -#define bfin_write_DMA1_IRQ_STATUS(val) bfin_write16(DMA1_IRQ_STATUS, val) -#define bfin_read_DMA1_PERIPHERAL_MAP() bfin_read16(DMA1_PERIPHERAL_MAP) -#define bfin_write_DMA1_PERIPHERAL_MAP(val) bfin_write16(DMA1_PERIPHERAL_MAP, val) -#define bfin_read_DMA1_CURR_X_COUNT() bfin_read16(DMA1_CURR_X_COUNT) -#define bfin_write_DMA1_CURR_X_COUNT(val) bfin_write16(DMA1_CURR_X_COUNT, val) -#define bfin_read_DMA1_CURR_Y_COUNT() bfin_read16(DMA1_CURR_Y_COUNT) -#define bfin_write_DMA1_CURR_Y_COUNT(val) bfin_write16(DMA1_CURR_Y_COUNT, val) -#define bfin_read_DMA2_NEXT_DESC_PTR() bfin_readPTR(DMA2_NEXT_DESC_PTR) -#define bfin_write_DMA2_NEXT_DESC_PTR(val) bfin_writePTR(DMA2_NEXT_DESC_PTR, val) -#define bfin_read_DMA2_START_ADDR() bfin_readPTR(DMA2_START_ADDR) -#define bfin_write_DMA2_START_ADDR(val) bfin_writePTR(DMA2_START_ADDR, val) -#define bfin_read_DMA2_CONFIG() bfin_read16(DMA2_CONFIG) -#define bfin_write_DMA2_CONFIG(val) bfin_write16(DMA2_CONFIG, val) -#define bfin_read_DMA2_X_COUNT() bfin_read16(DMA2_X_COUNT) -#define bfin_write_DMA2_X_COUNT(val) bfin_write16(DMA2_X_COUNT, val) -#define bfin_read_DMA2_X_MODIFY() bfin_read16(DMA2_X_MODIFY) -#define bfin_write_DMA2_X_MODIFY(val) bfin_write16(DMA2_X_MODIFY, val) -#define bfin_read_DMA2_Y_COUNT() bfin_read16(DMA2_Y_COUNT) -#define bfin_write_DMA2_Y_COUNT(val) bfin_write16(DMA2_Y_COUNT, val) -#define bfin_read_DMA2_Y_MODIFY() bfin_read16(DMA2_Y_MODIFY) -#define bfin_write_DMA2_Y_MODIFY(val) bfin_write16(DMA2_Y_MODIFY, val) -#define bfin_read_DMA2_CURR_DESC_PTR() bfin_readPTR(DMA2_CURR_DESC_PTR) -#define bfin_write_DMA2_CURR_DESC_PTR(val) bfin_writePTR(DMA2_CURR_DESC_PTR, val) -#define bfin_read_DMA2_CURR_ADDR() bfin_readPTR(DMA2_CURR_ADDR) -#define bfin_write_DMA2_CURR_ADDR(val) bfin_writePTR(DMA2_CURR_ADDR, val) -#define bfin_read_DMA2_IRQ_STATUS() bfin_read16(DMA2_IRQ_STATUS) -#define bfin_write_DMA2_IRQ_STATUS(val) bfin_write16(DMA2_IRQ_STATUS, val) -#define bfin_read_DMA2_PERIPHERAL_MAP() bfin_read16(DMA2_PERIPHERAL_MAP) -#define bfin_write_DMA2_PERIPHERAL_MAP(val) bfin_write16(DMA2_PERIPHERAL_MAP, val) -#define bfin_read_DMA2_CURR_X_COUNT() bfin_read16(DMA2_CURR_X_COUNT) -#define bfin_write_DMA2_CURR_X_COUNT(val) bfin_write16(DMA2_CURR_X_COUNT, val) -#define bfin_read_DMA2_CURR_Y_COUNT() bfin_read16(DMA2_CURR_Y_COUNT) -#define bfin_write_DMA2_CURR_Y_COUNT(val) bfin_write16(DMA2_CURR_Y_COUNT, val) -#define bfin_read_DMA3_NEXT_DESC_PTR() bfin_readPTR(DMA3_NEXT_DESC_PTR) -#define bfin_write_DMA3_NEXT_DESC_PTR(val) bfin_writePTR(DMA3_NEXT_DESC_PTR, val) -#define bfin_read_DMA3_START_ADDR() bfin_readPTR(DMA3_START_ADDR) -#define bfin_write_DMA3_START_ADDR(val) bfin_writePTR(DMA3_START_ADDR, val) -#define bfin_read_DMA3_CONFIG() bfin_read16(DMA3_CONFIG) -#define bfin_write_DMA3_CONFIG(val) bfin_write16(DMA3_CONFIG, val) -#define bfin_read_DMA3_X_COUNT() bfin_read16(DMA3_X_COUNT) -#define bfin_write_DMA3_X_COUNT(val) bfin_write16(DMA3_X_COUNT, val) -#define bfin_read_DMA3_X_MODIFY() bfin_read16(DMA3_X_MODIFY) -#define bfin_write_DMA3_X_MODIFY(val) bfin_write16(DMA3_X_MODIFY, val) -#define bfin_read_DMA3_Y_COUNT() bfin_read16(DMA3_Y_COUNT) -#define bfin_write_DMA3_Y_COUNT(val) bfin_write16(DMA3_Y_COUNT, val) -#define bfin_read_DMA3_Y_MODIFY() bfin_read16(DMA3_Y_MODIFY) -#define bfin_write_DMA3_Y_MODIFY(val) bfin_write16(DMA3_Y_MODIFY, val) -#define bfin_read_DMA3_CURR_DESC_PTR() bfin_readPTR(DMA3_CURR_DESC_PTR) -#define bfin_write_DMA3_CURR_DESC_PTR(val) bfin_writePTR(DMA3_CURR_DESC_PTR, val) -#define bfin_read_DMA3_CURR_ADDR() bfin_readPTR(DMA3_CURR_ADDR) -#define bfin_write_DMA3_CURR_ADDR(val) bfin_writePTR(DMA3_CURR_ADDR, val) -#define bfin_read_DMA3_IRQ_STATUS() bfin_read16(DMA3_IRQ_STATUS) -#define bfin_write_DMA3_IRQ_STATUS(val) bfin_write16(DMA3_IRQ_STATUS, val) -#define bfin_read_DMA3_PERIPHERAL_MAP() bfin_read16(DMA3_PERIPHERAL_MAP) -#define bfin_write_DMA3_PERIPHERAL_MAP(val) bfin_write16(DMA3_PERIPHERAL_MAP, val) -#define bfin_read_DMA3_CURR_X_COUNT() bfin_read16(DMA3_CURR_X_COUNT) -#define bfin_write_DMA3_CURR_X_COUNT(val) bfin_write16(DMA3_CURR_X_COUNT, val) -#define bfin_read_DMA3_CURR_Y_COUNT() bfin_read16(DMA3_CURR_Y_COUNT) -#define bfin_write_DMA3_CURR_Y_COUNT(val) bfin_write16(DMA3_CURR_Y_COUNT, val) -#define bfin_read_DMA4_NEXT_DESC_PTR() bfin_readPTR(DMA4_NEXT_DESC_PTR) -#define bfin_write_DMA4_NEXT_DESC_PTR(val) bfin_writePTR(DMA4_NEXT_DESC_PTR, val) -#define bfin_read_DMA4_START_ADDR() bfin_readPTR(DMA4_START_ADDR) -#define bfin_write_DMA4_START_ADDR(val) bfin_writePTR(DMA4_START_ADDR, val) -#define bfin_read_DMA4_CONFIG() bfin_read16(DMA4_CONFIG) -#define bfin_write_DMA4_CONFIG(val) bfin_write16(DMA4_CONFIG, val) -#define bfin_read_DMA4_X_COUNT() bfin_read16(DMA4_X_COUNT) -#define bfin_write_DMA4_X_COUNT(val) bfin_write16(DMA4_X_COUNT, val) -#define bfin_read_DMA4_X_MODIFY() bfin_read16(DMA4_X_MODIFY) -#define bfin_write_DMA4_X_MODIFY(val) bfin_write16(DMA4_X_MODIFY, val) -#define bfin_read_DMA4_Y_COUNT() bfin_read16(DMA4_Y_COUNT) -#define bfin_write_DMA4_Y_COUNT(val) bfin_write16(DMA4_Y_COUNT, val) -#define bfin_read_DMA4_Y_MODIFY() bfin_read16(DMA4_Y_MODIFY) -#define bfin_write_DMA4_Y_MODIFY(val) bfin_write16(DMA4_Y_MODIFY, val) -#define bfin_read_DMA4_CURR_DESC_PTR() bfin_readPTR(DMA4_CURR_DESC_PTR) -#define bfin_write_DMA4_CURR_DESC_PTR(val) bfin_writePTR(DMA4_CURR_DESC_PTR, val) -#define bfin_read_DMA4_CURR_ADDR() bfin_readPTR(DMA4_CURR_ADDR) -#define bfin_write_DMA4_CURR_ADDR(val) bfin_writePTR(DMA4_CURR_ADDR, val) -#define bfin_read_DMA4_IRQ_STATUS() bfin_read16(DMA4_IRQ_STATUS) -#define bfin_write_DMA4_IRQ_STATUS(val) bfin_write16(DMA4_IRQ_STATUS, val) -#define bfin_read_DMA4_PERIPHERAL_MAP() bfin_read16(DMA4_PERIPHERAL_MAP) -#define bfin_write_DMA4_PERIPHERAL_MAP(val) bfin_write16(DMA4_PERIPHERAL_MAP, val) -#define bfin_read_DMA4_CURR_X_COUNT() bfin_read16(DMA4_CURR_X_COUNT) -#define bfin_write_DMA4_CURR_X_COUNT(val) bfin_write16(DMA4_CURR_X_COUNT, val) -#define bfin_read_DMA4_CURR_Y_COUNT() bfin_read16(DMA4_CURR_Y_COUNT) -#define bfin_write_DMA4_CURR_Y_COUNT(val) bfin_write16(DMA4_CURR_Y_COUNT, val) -#define bfin_read_DMA5_NEXT_DESC_PTR() bfin_readPTR(DMA5_NEXT_DESC_PTR) -#define bfin_write_DMA5_NEXT_DESC_PTR(val) bfin_writePTR(DMA5_NEXT_DESC_PTR, val) -#define bfin_read_DMA5_START_ADDR() bfin_readPTR(DMA5_START_ADDR) -#define bfin_write_DMA5_START_ADDR(val) bfin_writePTR(DMA5_START_ADDR, val) -#define bfin_read_DMA5_CONFIG() bfin_read16(DMA5_CONFIG) -#define bfin_write_DMA5_CONFIG(val) bfin_write16(DMA5_CONFIG, val) -#define bfin_read_DMA5_X_COUNT() bfin_read16(DMA5_X_COUNT) -#define bfin_write_DMA5_X_COUNT(val) bfin_write16(DMA5_X_COUNT, val) -#define bfin_read_DMA5_X_MODIFY() bfin_read16(DMA5_X_MODIFY) -#define bfin_write_DMA5_X_MODIFY(val) bfin_write16(DMA5_X_MODIFY, val) -#define bfin_read_DMA5_Y_COUNT() bfin_read16(DMA5_Y_COUNT) -#define bfin_write_DMA5_Y_COUNT(val) bfin_write16(DMA5_Y_COUNT, val) -#define bfin_read_DMA5_Y_MODIFY() bfin_read16(DMA5_Y_MODIFY) -#define bfin_write_DMA5_Y_MODIFY(val) bfin_write16(DMA5_Y_MODIFY, val) -#define bfin_read_DMA5_CURR_DESC_PTR() bfin_readPTR(DMA5_CURR_DESC_PTR) -#define bfin_write_DMA5_CURR_DESC_PTR(val) bfin_writePTR(DMA5_CURR_DESC_PTR, val) -#define bfin_read_DMA5_CURR_ADDR() bfin_readPTR(DMA5_CURR_ADDR) -#define bfin_write_DMA5_CURR_ADDR(val) bfin_writePTR(DMA5_CURR_ADDR, val) -#define bfin_read_DMA5_IRQ_STATUS() bfin_read16(DMA5_IRQ_STATUS) -#define bfin_write_DMA5_IRQ_STATUS(val) bfin_write16(DMA5_IRQ_STATUS, val) -#define bfin_read_DMA5_PERIPHERAL_MAP() bfin_read16(DMA5_PERIPHERAL_MAP) -#define bfin_write_DMA5_PERIPHERAL_MAP(val) bfin_write16(DMA5_PERIPHERAL_MAP, val) -#define bfin_read_DMA5_CURR_X_COUNT() bfin_read16(DMA5_CURR_X_COUNT) -#define bfin_write_DMA5_CURR_X_COUNT(val) bfin_write16(DMA5_CURR_X_COUNT, val) -#define bfin_read_DMA5_CURR_Y_COUNT() bfin_read16(DMA5_CURR_Y_COUNT) -#define bfin_write_DMA5_CURR_Y_COUNT(val) bfin_write16(DMA5_CURR_Y_COUNT, val) -#define bfin_read_DMA6_NEXT_DESC_PTR() bfin_read32(DMA6_NEXT_DESC_PTR) -#define bfin_write_DMA6_NEXT_DESC_PTR(val) bfin_write32(DMA6_NEXT_DESC_PTR, val) -#define bfin_read_DMA6_START_ADDR() bfin_readPTR(DMA6_START_ADDR) -#define bfin_write_DMA6_START_ADDR(val) bfin_writePTR(DMA6_START_ADDR, val) -#define bfin_read_DMA6_CONFIG() bfin_read16(DMA6_CONFIG) -#define bfin_write_DMA6_CONFIG(val) bfin_write16(DMA6_CONFIG, val) -#define bfin_read_DMA6_X_COUNT() bfin_read16(DMA6_X_COUNT) -#define bfin_write_DMA6_X_COUNT(val) bfin_write16(DMA6_X_COUNT, val) -#define bfin_read_DMA6_X_MODIFY() bfin_read16(DMA6_X_MODIFY) -#define bfin_write_DMA6_X_MODIFY(val) bfin_write16(DMA6_X_MODIFY, val) -#define bfin_read_DMA6_Y_COUNT() bfin_read16(DMA6_Y_COUNT) -#define bfin_write_DMA6_Y_COUNT(val) bfin_write16(DMA6_Y_COUNT, val) -#define bfin_read_DMA6_Y_MODIFY() bfin_read16(DMA6_Y_MODIFY) -#define bfin_write_DMA6_Y_MODIFY(val) bfin_write16(DMA6_Y_MODIFY, val) -#define bfin_read_DMA6_CURR_DESC_PTR() bfin_readPTR(DMA6_CURR_DESC_PTR) -#define bfin_write_DMA6_CURR_DESC_PTR(val) bfin_writePTR(DMA6_CURR_DESC_PTR, val) -#define bfin_read_DMA6_CURR_ADDR() bfin_readPTR(DMA6_CURR_ADDR) -#define bfin_write_DMA6_CURR_ADDR(val) bfin_writePTR(DMA6_CURR_ADDR, val) -#define bfin_read_DMA6_IRQ_STATUS() bfin_read16(DMA6_IRQ_STATUS) -#define bfin_write_DMA6_IRQ_STATUS(val) bfin_write16(DMA6_IRQ_STATUS, val) -#define bfin_read_DMA6_PERIPHERAL_MAP() bfin_read16(DMA6_PERIPHERAL_MAP) -#define bfin_write_DMA6_PERIPHERAL_MAP(val) bfin_write16(DMA6_PERIPHERAL_MAP, val) -#define bfin_read_DMA6_CURR_X_COUNT() bfin_read16(DMA6_CURR_X_COUNT) -#define bfin_write_DMA6_CURR_X_COUNT(val) bfin_write16(DMA6_CURR_X_COUNT, val) -#define bfin_read_DMA6_CURR_Y_COUNT() bfin_read16(DMA6_CURR_Y_COUNT) -#define bfin_write_DMA6_CURR_Y_COUNT(val) bfin_write16(DMA6_CURR_Y_COUNT, val) -#define bfin_read_DMA7_NEXT_DESC_PTR() bfin_readPTR(DMA7_NEXT_DESC_PTR) -#define bfin_write_DMA7_NEXT_DESC_PTR(val) bfin_writePTR(DMA7_NEXT_DESC_PTR, val) -#define bfin_read_DMA7_START_ADDR() bfin_readPTR(DMA7_START_ADDR) -#define bfin_write_DMA7_START_ADDR(val) bfin_writePTR(DMA7_START_ADDR, val) -#define bfin_read_DMA7_CONFIG() bfin_read16(DMA7_CONFIG) -#define bfin_write_DMA7_CONFIG(val) bfin_write16(DMA7_CONFIG, val) -#define bfin_read_DMA7_X_COUNT() bfin_read16(DMA7_X_COUNT) -#define bfin_write_DMA7_X_COUNT(val) bfin_write16(DMA7_X_COUNT, val) -#define bfin_read_DMA7_X_MODIFY() bfin_read16(DMA7_X_MODIFY) -#define bfin_write_DMA7_X_MODIFY(val) bfin_write16(DMA7_X_MODIFY, val) -#define bfin_read_DMA7_Y_COUNT() bfin_read16(DMA7_Y_COUNT) -#define bfin_write_DMA7_Y_COUNT(val) bfin_write16(DMA7_Y_COUNT, val) -#define bfin_read_DMA7_Y_MODIFY() bfin_read16(DMA7_Y_MODIFY) -#define bfin_write_DMA7_Y_MODIFY(val) bfin_write16(DMA7_Y_MODIFY, val) -#define bfin_read_DMA7_CURR_DESC_PTR() bfin_readPTR(DMA7_CURR_DESC_PTR) -#define bfin_write_DMA7_CURR_DESC_PTR(val) bfin_writePTR(DMA7_CURR_DESC_PTR, val) -#define bfin_read_DMA7_CURR_ADDR() bfin_readPTR(DMA7_CURR_ADDR) -#define bfin_write_DMA7_CURR_ADDR(val) bfin_writePTR(DMA7_CURR_ADDR, val) -#define bfin_read_DMA7_IRQ_STATUS() bfin_read16(DMA7_IRQ_STATUS) -#define bfin_write_DMA7_IRQ_STATUS(val) bfin_write16(DMA7_IRQ_STATUS, val) -#define bfin_read_DMA7_PERIPHERAL_MAP() bfin_read16(DMA7_PERIPHERAL_MAP) -#define bfin_write_DMA7_PERIPHERAL_MAP(val) bfin_write16(DMA7_PERIPHERAL_MAP, val) -#define bfin_read_DMA7_CURR_X_COUNT() bfin_read16(DMA7_CURR_X_COUNT) -#define bfin_write_DMA7_CURR_X_COUNT(val) bfin_write16(DMA7_CURR_X_COUNT, val) -#define bfin_read_DMA7_CURR_Y_COUNT() bfin_read16(DMA7_CURR_Y_COUNT) -#define bfin_write_DMA7_CURR_Y_COUNT(val) bfin_write16(DMA7_CURR_Y_COUNT, val) -#define bfin_read_DMA8_NEXT_DESC_PTR() bfin_readPTR(DMA8_NEXT_DESC_PTR) -#define bfin_write_DMA8_NEXT_DESC_PTR(val) bfin_writePTR(DMA8_NEXT_DESC_PTR, val) -#define bfin_read_DMA8_START_ADDR() bfin_readPTR(DMA8_START_ADDR) -#define bfin_write_DMA8_START_ADDR(val) bfin_writePTR(DMA8_START_ADDR, val) -#define bfin_read_DMA8_CONFIG() bfin_read16(DMA8_CONFIG) -#define bfin_write_DMA8_CONFIG(val) bfin_write16(DMA8_CONFIG, val) -#define bfin_read_DMA8_X_COUNT() bfin_read16(DMA8_X_COUNT) -#define bfin_write_DMA8_X_COUNT(val) bfin_write16(DMA8_X_COUNT, val) -#define bfin_read_DMA8_X_MODIFY() bfin_read16(DMA8_X_MODIFY) -#define bfin_write_DMA8_X_MODIFY(val) bfin_write16(DMA8_X_MODIFY, val) -#define bfin_read_DMA8_Y_COUNT() bfin_read16(DMA8_Y_COUNT) -#define bfin_write_DMA8_Y_COUNT(val) bfin_write16(DMA8_Y_COUNT, val) -#define bfin_read_DMA8_Y_MODIFY() bfin_read16(DMA8_Y_MODIFY) -#define bfin_write_DMA8_Y_MODIFY(val) bfin_write16(DMA8_Y_MODIFY, val) -#define bfin_read_DMA8_CURR_DESC_PTR() bfin_readPTR(DMA8_CURR_DESC_PTR) -#define bfin_write_DMA8_CURR_DESC_PTR(val) bfin_writePTR(DMA8_CURR_DESC_PTR, val) -#define bfin_read_DMA8_CURR_ADDR() bfin_readPTR(DMA8_CURR_ADDR) -#define bfin_write_DMA8_CURR_ADDR(val) bfin_writePTR(DMA8_CURR_ADDR, val) -#define bfin_read_DMA8_IRQ_STATUS() bfin_read16(DMA8_IRQ_STATUS) -#define bfin_write_DMA8_IRQ_STATUS(val) bfin_write16(DMA8_IRQ_STATUS, val) -#define bfin_read_DMA8_PERIPHERAL_MAP() bfin_read16(DMA8_PERIPHERAL_MAP) -#define bfin_write_DMA8_PERIPHERAL_MAP(val) bfin_write16(DMA8_PERIPHERAL_MAP, val) -#define bfin_read_DMA8_CURR_X_COUNT() bfin_read16(DMA8_CURR_X_COUNT) -#define bfin_write_DMA8_CURR_X_COUNT(val) bfin_write16(DMA8_CURR_X_COUNT, val) -#define bfin_read_DMA8_CURR_Y_COUNT() bfin_read16(DMA8_CURR_Y_COUNT) -#define bfin_write_DMA8_CURR_Y_COUNT(val) bfin_write16(DMA8_CURR_Y_COUNT, val) -#define bfin_read_DMA9_NEXT_DESC_PTR() bfin_readPTR(DMA9_NEXT_DESC_PTR) -#define bfin_write_DMA9_NEXT_DESC_PTR(val) bfin_writePTR(DMA9_NEXT_DESC_PTR, val) -#define bfin_read_DMA9_START_ADDR() bfin_readPTR(DMA9_START_ADDR) -#define bfin_write_DMA9_START_ADDR(val) bfin_writePTR(DMA9_START_ADDR, val) -#define bfin_read_DMA9_CONFIG() bfin_read16(DMA9_CONFIG) -#define bfin_write_DMA9_CONFIG(val) bfin_write16(DMA9_CONFIG, val) -#define bfin_read_DMA9_X_COUNT() bfin_read16(DMA9_X_COUNT) -#define bfin_write_DMA9_X_COUNT(val) bfin_write16(DMA9_X_COUNT, val) -#define bfin_read_DMA9_X_MODIFY() bfin_read16(DMA9_X_MODIFY) -#define bfin_write_DMA9_X_MODIFY(val) bfin_write16(DMA9_X_MODIFY, val) -#define bfin_read_DMA9_Y_COUNT() bfin_read16(DMA9_Y_COUNT) -#define bfin_write_DMA9_Y_COUNT(val) bfin_write16(DMA9_Y_COUNT, val) -#define bfin_read_DMA9_Y_MODIFY() bfin_read16(DMA9_Y_MODIFY) -#define bfin_write_DMA9_Y_MODIFY(val) bfin_write16(DMA9_Y_MODIFY, val) -#define bfin_read_DMA9_CURR_DESC_PTR() bfin_readPTR(DMA9_CURR_DESC_PTR) -#define bfin_write_DMA9_CURR_DESC_PTR(val) bfin_writePTR(DMA9_CURR_DESC_PTR, val) -#define bfin_read_DMA9_CURR_ADDR() bfin_readPTR(DMA9_CURR_ADDR) -#define bfin_write_DMA9_CURR_ADDR(val) bfin_writePTR(DMA9_CURR_ADDR, val) -#define bfin_read_DMA9_IRQ_STATUS() bfin_read16(DMA9_IRQ_STATUS) -#define bfin_write_DMA9_IRQ_STATUS(val) bfin_write16(DMA9_IRQ_STATUS, val) -#define bfin_read_DMA9_PERIPHERAL_MAP() bfin_read16(DMA9_PERIPHERAL_MAP) -#define bfin_write_DMA9_PERIPHERAL_MAP(val) bfin_write16(DMA9_PERIPHERAL_MAP, val) -#define bfin_read_DMA9_CURR_X_COUNT() bfin_read16(DMA9_CURR_X_COUNT) -#define bfin_write_DMA9_CURR_X_COUNT(val) bfin_write16(DMA9_CURR_X_COUNT, val) -#define bfin_read_DMA9_CURR_Y_COUNT() bfin_read16(DMA9_CURR_Y_COUNT) -#define bfin_write_DMA9_CURR_Y_COUNT(val) bfin_write16(DMA9_CURR_Y_COUNT, val) -#define bfin_read_DMA10_NEXT_DESC_PTR() bfin_readPTR(DMA10_NEXT_DESC_PTR) -#define bfin_write_DMA10_NEXT_DESC_PTR(val) bfin_writePTR(DMA10_NEXT_DESC_PTR, val) -#define bfin_read_DMA10_START_ADDR() bfin_readPTR(DMA10_START_ADDR) -#define bfin_write_DMA10_START_ADDR(val) bfin_writePTR(DMA10_START_ADDR, val) -#define bfin_read_DMA10_CONFIG() bfin_read16(DMA10_CONFIG) -#define bfin_write_DMA10_CONFIG(val) bfin_write16(DMA10_CONFIG, val) -#define bfin_read_DMA10_X_COUNT() bfin_read16(DMA10_X_COUNT) -#define bfin_write_DMA10_X_COUNT(val) bfin_write16(DMA10_X_COUNT, val) -#define bfin_read_DMA10_X_MODIFY() bfin_read16(DMA10_X_MODIFY) -#define bfin_write_DMA10_X_MODIFY(val) bfin_write16(DMA10_X_MODIFY, val) -#define bfin_read_DMA10_Y_COUNT() bfin_read16(DMA10_Y_COUNT) -#define bfin_write_DMA10_Y_COUNT(val) bfin_write16(DMA10_Y_COUNT, val) -#define bfin_read_DMA10_Y_MODIFY() bfin_read16(DMA10_Y_MODIFY) -#define bfin_write_DMA10_Y_MODIFY(val) bfin_write16(DMA10_Y_MODIFY, val) -#define bfin_read_DMA10_CURR_DESC_PTR() bfin_readPTR(DMA10_CURR_DESC_PTR) -#define bfin_write_DMA10_CURR_DESC_PTR(val) bfin_writePTR(DMA10_CURR_DESC_PTR, val) -#define bfin_read_DMA10_CURR_ADDR() bfin_readPTR(DMA10_CURR_ADDR) -#define bfin_write_DMA10_CURR_ADDR(val) bfin_writePTR(DMA10_CURR_ADDR, val) -#define bfin_read_DMA10_IRQ_STATUS() bfin_read16(DMA10_IRQ_STATUS) -#define bfin_write_DMA10_IRQ_STATUS(val) bfin_write16(DMA10_IRQ_STATUS, val) -#define bfin_read_DMA10_PERIPHERAL_MAP() bfin_read16(DMA10_PERIPHERAL_MAP) -#define bfin_write_DMA10_PERIPHERAL_MAP(val) bfin_write16(DMA10_PERIPHERAL_MAP, val) -#define bfin_read_DMA10_CURR_X_COUNT() bfin_read16(DMA10_CURR_X_COUNT) -#define bfin_write_DMA10_CURR_X_COUNT(val) bfin_write16(DMA10_CURR_X_COUNT, val) -#define bfin_read_DMA10_CURR_Y_COUNT() bfin_read16(DMA10_CURR_Y_COUNT) -#define bfin_write_DMA10_CURR_Y_COUNT(val) bfin_write16(DMA10_CURR_Y_COUNT, val) -#define bfin_read_DMA11_NEXT_DESC_PTR() bfin_readPTR(DMA11_NEXT_DESC_PTR) -#define bfin_write_DMA11_NEXT_DESC_PTR(val) bfin_writePTR(DMA11_NEXT_DESC_PTR, val) -#define bfin_read_DMA11_START_ADDR() bfin_readPTR(DMA11_START_ADDR) -#define bfin_write_DMA11_START_ADDR(val) bfin_writePTR(DMA11_START_ADDR, val) -#define bfin_read_DMA11_CONFIG() bfin_read16(DMA11_CONFIG) -#define bfin_write_DMA11_CONFIG(val) bfin_write16(DMA11_CONFIG, val) -#define bfin_read_DMA11_X_COUNT() bfin_read16(DMA11_X_COUNT) -#define bfin_write_DMA11_X_COUNT(val) bfin_write16(DMA11_X_COUNT, val) -#define bfin_read_DMA11_X_MODIFY() bfin_read16(DMA11_X_MODIFY) -#define bfin_write_DMA11_X_MODIFY(val) bfin_write16(DMA11_X_MODIFY, val) -#define bfin_read_DMA11_Y_COUNT() bfin_read16(DMA11_Y_COUNT) -#define bfin_write_DMA11_Y_COUNT(val) bfin_write16(DMA11_Y_COUNT, val) -#define bfin_read_DMA11_Y_MODIFY() bfin_read16(DMA11_Y_MODIFY) -#define bfin_write_DMA11_Y_MODIFY(val) bfin_write16(DMA11_Y_MODIFY, val) -#define bfin_read_DMA11_CURR_DESC_PTR() bfin_readPTR(DMA11_CURR_DESC_PTR) -#define bfin_write_DMA11_CURR_DESC_PTR(val) bfin_writePTR(DMA11_CURR_DESC_PTR, val) -#define bfin_read_DMA11_CURR_ADDR() bfin_readPTR(DMA11_CURR_ADDR) -#define bfin_write_DMA11_CURR_ADDR(val) bfin_writePTR(DMA11_CURR_ADDR, val) -#define bfin_read_DMA11_IRQ_STATUS() bfin_read16(DMA11_IRQ_STATUS) -#define bfin_write_DMA11_IRQ_STATUS(val) bfin_write16(DMA11_IRQ_STATUS, val) -#define bfin_read_DMA11_PERIPHERAL_MAP() bfin_read16(DMA11_PERIPHERAL_MAP) -#define bfin_write_DMA11_PERIPHERAL_MAP(val) bfin_write16(DMA11_PERIPHERAL_MAP, val) -#define bfin_read_DMA11_CURR_X_COUNT() bfin_read16(DMA11_CURR_X_COUNT) -#define bfin_write_DMA11_CURR_X_COUNT(val) bfin_write16(DMA11_CURR_X_COUNT, val) -#define bfin_read_DMA11_CURR_Y_COUNT() bfin_read16(DMA11_CURR_Y_COUNT) -#define bfin_write_DMA11_CURR_Y_COUNT(val) bfin_write16(DMA11_CURR_Y_COUNT, val) -#define bfin_read_MDMA_S0_NEXT_DESC_PTR() bfin_readPTR(MDMA_S0_NEXT_DESC_PTR) -#define bfin_write_MDMA_S0_NEXT_DESC_PTR(val) bfin_writePTR(MDMA_S0_NEXT_DESC_PTR, val) -#define bfin_read_MDMA_S0_START_ADDR() bfin_readPTR(MDMA_S0_START_ADDR) -#define bfin_write_MDMA_S0_START_ADDR(val) bfin_writePTR(MDMA_S0_START_ADDR, val) -#define bfin_read_MDMA_S0_CONFIG() bfin_read16(MDMA_S0_CONFIG) -#define bfin_write_MDMA_S0_CONFIG(val) bfin_write16(MDMA_S0_CONFIG, val) -#define bfin_read_MDMA_S0_X_COUNT() bfin_read16(MDMA_S0_X_COUNT) -#define bfin_write_MDMA_S0_X_COUNT(val) bfin_write16(MDMA_S0_X_COUNT, val) -#define bfin_read_MDMA_S0_X_MODIFY() bfin_read16(MDMA_S0_X_MODIFY) -#define bfin_write_MDMA_S0_X_MODIFY(val) bfin_write16(MDMA_S0_X_MODIFY, val) -#define bfin_read_MDMA_S0_Y_COUNT() bfin_read16(MDMA_S0_Y_COUNT) -#define bfin_write_MDMA_S0_Y_COUNT(val) bfin_write16(MDMA_S0_Y_COUNT, val) -#define bfin_read_MDMA_S0_Y_MODIFY() bfin_read16(MDMA_S0_Y_MODIFY) -#define bfin_write_MDMA_S0_Y_MODIFY(val) bfin_write16(MDMA_S0_Y_MODIFY, val) -#define bfin_read_MDMA_S0_CURR_DESC_PTR() bfin_readPTR(MDMA_S0_CURR_DESC_PTR) -#define bfin_write_MDMA_S0_CURR_DESC_PTR(val) bfin_writePTR(MDMA_S0_CURR_DESC_PTR, val) -#define bfin_read_MDMA_S0_CURR_ADDR() bfin_readPTR(MDMA_S0_CURR_ADDR) -#define bfin_write_MDMA_S0_CURR_ADDR(val) bfin_writePTR(MDMA_S0_CURR_ADDR, val) -#define bfin_read_MDMA_S0_IRQ_STATUS() bfin_read16(MDMA_S0_IRQ_STATUS) -#define bfin_write_MDMA_S0_IRQ_STATUS(val) bfin_write16(MDMA_S0_IRQ_STATUS, val) -#define bfin_read_MDMA_S0_PERIPHERAL_MAP() bfin_read16(MDMA_S0_PERIPHERAL_MAP) -#define bfin_write_MDMA_S0_PERIPHERAL_MAP(val) bfin_write16(MDMA_S0_PERIPHERAL_MAP, val) -#define bfin_read_MDMA_S0_CURR_X_COUNT() bfin_read16(MDMA_S0_CURR_X_COUNT) -#define bfin_write_MDMA_S0_CURR_X_COUNT(val) bfin_write16(MDMA_S0_CURR_X_COUNT, val) -#define bfin_read_MDMA_S0_CURR_Y_COUNT() bfin_read16(MDMA_S0_CURR_Y_COUNT) -#define bfin_write_MDMA_S0_CURR_Y_COUNT(val) bfin_write16(MDMA_S0_CURR_Y_COUNT, val) -#define bfin_read_MDMA_D0_NEXT_DESC_PTR() bfin_readPTR(MDMA_D0_NEXT_DESC_PTR) -#define bfin_write_MDMA_D0_NEXT_DESC_PTR(val) bfin_writePTR(MDMA_D0_NEXT_DESC_PTR, val) -#define bfin_read_MDMA_D0_START_ADDR() bfin_readPTR(MDMA_D0_START_ADDR) -#define bfin_write_MDMA_D0_START_ADDR(val) bfin_writePTR(MDMA_D0_START_ADDR, val) -#define bfin_read_MDMA_D0_CONFIG() bfin_read16(MDMA_D0_CONFIG) -#define bfin_write_MDMA_D0_CONFIG(val) bfin_write16(MDMA_D0_CONFIG, val) -#define bfin_read_MDMA_D0_X_COUNT() bfin_read16(MDMA_D0_X_COUNT) -#define bfin_write_MDMA_D0_X_COUNT(val) bfin_write16(MDMA_D0_X_COUNT, val) -#define bfin_read_MDMA_D0_X_MODIFY() bfin_read16(MDMA_D0_X_MODIFY) -#define bfin_write_MDMA_D0_X_MODIFY(val) bfin_write16(MDMA_D0_X_MODIFY, val) -#define bfin_read_MDMA_D0_Y_COUNT() bfin_read16(MDMA_D0_Y_COUNT) -#define bfin_write_MDMA_D0_Y_COUNT(val) bfin_write16(MDMA_D0_Y_COUNT, val) -#define bfin_read_MDMA_D0_Y_MODIFY() bfin_read16(MDMA_D0_Y_MODIFY) -#define bfin_write_MDMA_D0_Y_MODIFY(val) bfin_write16(MDMA_D0_Y_MODIFY, val) -#define bfin_read_MDMA_D0_CURR_DESC_PTR() bfin_readPTR(MDMA_D0_CURR_DESC_PTR) -#define bfin_write_MDMA_D0_CURR_DESC_PTR(val) bfin_writePTR(MDMA_D0_CURR_DESC_PTR, val) -#define bfin_read_MDMA_D0_CURR_ADDR() bfin_readPTR(MDMA_D0_CURR_ADDR) -#define bfin_write_MDMA_D0_CURR_ADDR(val) bfin_writePTR(MDMA_D0_CURR_ADDR, val) -#define bfin_read_MDMA_D0_IRQ_STATUS() bfin_read16(MDMA_D0_IRQ_STATUS) -#define bfin_write_MDMA_D0_IRQ_STATUS(val) bfin_write16(MDMA_D0_IRQ_STATUS, val) -#define bfin_read_MDMA_D0_PERIPHERAL_MAP() bfin_read16(MDMA_D0_PERIPHERAL_MAP) -#define bfin_write_MDMA_D0_PERIPHERAL_MAP(val) bfin_write16(MDMA_D0_PERIPHERAL_MAP, val) -#define bfin_read_MDMA_D0_CURR_X_COUNT() bfin_read16(MDMA_D0_CURR_X_COUNT) -#define bfin_write_MDMA_D0_CURR_X_COUNT(val) bfin_write16(MDMA_D0_CURR_X_COUNT, val) -#define bfin_read_MDMA_D0_CURR_Y_COUNT() bfin_read16(MDMA_D0_CURR_Y_COUNT) -#define bfin_write_MDMA_D0_CURR_Y_COUNT(val) bfin_write16(MDMA_D0_CURR_Y_COUNT, val) -#define bfin_read_MDMA_S1_NEXT_DESC_PTR() bfin_readPTR(MDMA_S1_NEXT_DESC_PTR) -#define bfin_write_MDMA_S1_NEXT_DESC_PTR(val) bfin_writePTR(MDMA_S1_NEXT_DESC_PTR, val) -#define bfin_read_MDMA_S1_START_ADDR() bfin_readPTR(MDMA_S1_START_ADDR) -#define bfin_write_MDMA_S1_START_ADDR(val) bfin_writePTR(MDMA_S1_START_ADDR, val) -#define bfin_read_MDMA_S1_CONFIG() bfin_read16(MDMA_S1_CONFIG) -#define bfin_write_MDMA_S1_CONFIG(val) bfin_write16(MDMA_S1_CONFIG, val) -#define bfin_read_MDMA_S1_X_COUNT() bfin_read16(MDMA_S1_X_COUNT) -#define bfin_write_MDMA_S1_X_COUNT(val) bfin_write16(MDMA_S1_X_COUNT, val) -#define bfin_read_MDMA_S1_X_MODIFY() bfin_read16(MDMA_S1_X_MODIFY) -#define bfin_write_MDMA_S1_X_MODIFY(val) bfin_write16(MDMA_S1_X_MODIFY, val) -#define bfin_read_MDMA_S1_Y_COUNT() bfin_read16(MDMA_S1_Y_COUNT) -#define bfin_write_MDMA_S1_Y_COUNT(val) bfin_write16(MDMA_S1_Y_COUNT, val) -#define bfin_read_MDMA_S1_Y_MODIFY() bfin_read16(MDMA_S1_Y_MODIFY) -#define bfin_write_MDMA_S1_Y_MODIFY(val) bfin_write16(MDMA_S1_Y_MODIFY, val) -#define bfin_read_MDMA_S1_CURR_DESC_PTR() bfin_readPTR(MDMA_S1_CURR_DESC_PTR) -#define bfin_write_MDMA_S1_CURR_DESC_PTR(val) bfin_writePTR(MDMA_S1_CURR_DESC_PTR, val) -#define bfin_read_MDMA_S1_CURR_ADDR() bfin_readPTR(MDMA_S1_CURR_ADDR) -#define bfin_write_MDMA_S1_CURR_ADDR(val) bfin_writePTR(MDMA_S1_CURR_ADDR, val) -#define bfin_read_MDMA_S1_IRQ_STATUS() bfin_read16(MDMA_S1_IRQ_STATUS) -#define bfin_write_MDMA_S1_IRQ_STATUS(val) bfin_write16(MDMA_S1_IRQ_STATUS, val) -#define bfin_read_MDMA_S1_PERIPHERAL_MAP() bfin_read16(MDMA_S1_PERIPHERAL_MAP) -#define bfin_write_MDMA_S1_PERIPHERAL_MAP(val) bfin_write16(MDMA_S1_PERIPHERAL_MAP, val) -#define bfin_read_MDMA_S1_CURR_X_COUNT() bfin_read16(MDMA_S1_CURR_X_COUNT) -#define bfin_write_MDMA_S1_CURR_X_COUNT(val) bfin_write16(MDMA_S1_CURR_X_COUNT, val) -#define bfin_read_MDMA_S1_CURR_Y_COUNT() bfin_read16(MDMA_S1_CURR_Y_COUNT) -#define bfin_write_MDMA_S1_CURR_Y_COUNT(val) bfin_write16(MDMA_S1_CURR_Y_COUNT, val) -#define bfin_read_MDMA_D1_NEXT_DESC_PTR() bfin_readPTR(MDMA_D1_NEXT_DESC_PTR) -#define bfin_write_MDMA_D1_NEXT_DESC_PTR(val) bfin_writePTR(MDMA_D1_NEXT_DESC_PTR, val) -#define bfin_read_MDMA_D1_START_ADDR() bfin_readPTR(MDMA_D1_START_ADDR) -#define bfin_write_MDMA_D1_START_ADDR(val) bfin_writePTR(MDMA_D1_START_ADDR, val) -#define bfin_read_MDMA_D1_CONFIG() bfin_read16(MDMA_D1_CONFIG) -#define bfin_write_MDMA_D1_CONFIG(val) bfin_write16(MDMA_D1_CONFIG, val) -#define bfin_read_MDMA_D1_X_COUNT() bfin_read16(MDMA_D1_X_COUNT) -#define bfin_write_MDMA_D1_X_COUNT(val) bfin_write16(MDMA_D1_X_COUNT, val) -#define bfin_read_MDMA_D1_X_MODIFY() bfin_read16(MDMA_D1_X_MODIFY) -#define bfin_write_MDMA_D1_X_MODIFY(val) bfin_write16(MDMA_D1_X_MODIFY, val) -#define bfin_read_MDMA_D1_Y_COUNT() bfin_read16(MDMA_D1_Y_COUNT) -#define bfin_write_MDMA_D1_Y_COUNT(val) bfin_write16(MDMA_D1_Y_COUNT, val) -#define bfin_read_MDMA_D1_Y_MODIFY() bfin_read16(MDMA_D1_Y_MODIFY) -#define bfin_write_MDMA_D1_Y_MODIFY(val) bfin_write16(MDMA_D1_Y_MODIFY, val) -#define bfin_read_MDMA_D1_CURR_DESC_PTR() bfin_readPTR(MDMA_D1_CURR_DESC_PTR) -#define bfin_write_MDMA_D1_CURR_DESC_PTR(val) bfin_writePTR(MDMA_D1_CURR_DESC_PTR, val) -#define bfin_read_MDMA_D1_CURR_ADDR() bfin_readPTR(MDMA_D1_CURR_ADDR) -#define bfin_write_MDMA_D1_CURR_ADDR(val) bfin_writePTR(MDMA_D1_CURR_ADDR, val) -#define bfin_read_MDMA_D1_IRQ_STATUS() bfin_read16(MDMA_D1_IRQ_STATUS) -#define bfin_write_MDMA_D1_IRQ_STATUS(val) bfin_write16(MDMA_D1_IRQ_STATUS, val) -#define bfin_read_MDMA_D1_PERIPHERAL_MAP() bfin_read16(MDMA_D1_PERIPHERAL_MAP) -#define bfin_write_MDMA_D1_PERIPHERAL_MAP(val) bfin_write16(MDMA_D1_PERIPHERAL_MAP, val) -#define bfin_read_MDMA_D1_CURR_X_COUNT() bfin_read16(MDMA_D1_CURR_X_COUNT) -#define bfin_write_MDMA_D1_CURR_X_COUNT(val) bfin_write16(MDMA_D1_CURR_X_COUNT, val) -#define bfin_read_MDMA_D1_CURR_Y_COUNT() bfin_read16(MDMA_D1_CURR_Y_COUNT) -#define bfin_write_MDMA_D1_CURR_Y_COUNT(val) bfin_write16(MDMA_D1_CURR_Y_COUNT, val) -#define bfin_read_PPI_CONTROL() bfin_read16(PPI_CONTROL) -#define bfin_write_PPI_CONTROL(val) bfin_write16(PPI_CONTROL, val) -#define bfin_read_PPI_STATUS() bfin_read16(PPI_STATUS) -#define bfin_write_PPI_STATUS(val) bfin_write16(PPI_STATUS, val) -#define bfin_read_PPI_COUNT() bfin_read16(PPI_COUNT) -#define bfin_write_PPI_COUNT(val) bfin_write16(PPI_COUNT, val) -#define bfin_read_PPI_DELAY() bfin_read16(PPI_DELAY) -#define bfin_write_PPI_DELAY(val) bfin_write16(PPI_DELAY, val) -#define bfin_read_PPI_FRAME() bfin_read16(PPI_FRAME) -#define bfin_write_PPI_FRAME(val) bfin_write16(PPI_FRAME, val) -#define bfin_read_TWI_CLKDIV() bfin_read16(TWI_CLKDIV) -#define bfin_write_TWI_CLKDIV(val) bfin_write16(TWI_CLKDIV, val) -#define bfin_read_TWI_CONTROL() bfin_read16(TWI_CONTROL) -#define bfin_write_TWI_CONTROL(val) bfin_write16(TWI_CONTROL, val) -#define bfin_read_TWI_SLAVE_CTL() bfin_read16(TWI_SLAVE_CTL) -#define bfin_write_TWI_SLAVE_CTL(val) bfin_write16(TWI_SLAVE_CTL, val) -#define bfin_read_TWI_SLAVE_STAT() bfin_read16(TWI_SLAVE_STAT) -#define bfin_write_TWI_SLAVE_STAT(val) bfin_write16(TWI_SLAVE_STAT, val) -#define bfin_read_TWI_SLAVE_ADDR() bfin_read16(TWI_SLAVE_ADDR) -#define bfin_write_TWI_SLAVE_ADDR(val) bfin_write16(TWI_SLAVE_ADDR, val) -#define bfin_read_TWI_MASTER_CTL() bfin_read16(TWI_MASTER_CTL) -#define bfin_write_TWI_MASTER_CTL(val) bfin_write16(TWI_MASTER_CTL, val) -#define bfin_read_TWI_MASTER_STAT() bfin_read16(TWI_MASTER_STAT) -#define bfin_write_TWI_MASTER_STAT(val) bfin_write16(TWI_MASTER_STAT, val) -#define bfin_read_TWI_MASTER_ADDR() bfin_read16(TWI_MASTER_ADDR) -#define bfin_write_TWI_MASTER_ADDR(val) bfin_write16(TWI_MASTER_ADDR, val) -#define bfin_read_TWI_INT_STAT() bfin_read16(TWI_INT_STAT) -#define bfin_write_TWI_INT_STAT(val) bfin_write16(TWI_INT_STAT, val) -#define bfin_read_TWI_INT_MASK() bfin_read16(TWI_INT_MASK) -#define bfin_write_TWI_INT_MASK(val) bfin_write16(TWI_INT_MASK, val) -#define bfin_read_TWI_FIFO_CTL() bfin_read16(TWI_FIFO_CTL) -#define bfin_write_TWI_FIFO_CTL(val) bfin_write16(TWI_FIFO_CTL, val) -#define bfin_read_TWI_FIFO_STAT() bfin_read16(TWI_FIFO_STAT) -#define bfin_write_TWI_FIFO_STAT(val) bfin_write16(TWI_FIFO_STAT, val) -#define bfin_read_TWI_XMT_DATA8() bfin_read16(TWI_XMT_DATA8) -#define bfin_write_TWI_XMT_DATA8(val) bfin_write16(TWI_XMT_DATA8, val) -#define bfin_read_TWI_XMT_DATA16() bfin_read16(TWI_XMT_DATA16) -#define bfin_write_TWI_XMT_DATA16(val) bfin_write16(TWI_XMT_DATA16, val) -#define bfin_read_TWI_RCV_DATA8() bfin_read16(TWI_RCV_DATA8) -#define bfin_write_TWI_RCV_DATA8(val) bfin_write16(TWI_RCV_DATA8, val) -#define bfin_read_TWI_RCV_DATA16() bfin_read16(TWI_RCV_DATA16) -#define bfin_write_TWI_RCV_DATA16(val) bfin_write16(TWI_RCV_DATA16, val) -#define bfin_read_PORTGIO() bfin_read16(PORTGIO) -#define bfin_write_PORTGIO(val) bfin_write16(PORTGIO, val) -#define bfin_read_PORTGIO_CLEAR() bfin_read16(PORTGIO_CLEAR) -#define bfin_write_PORTGIO_CLEAR(val) bfin_write16(PORTGIO_CLEAR, val) -#define bfin_read_PORTGIO_SET() bfin_read16(PORTGIO_SET) -#define bfin_write_PORTGIO_SET(val) bfin_write16(PORTGIO_SET, val) -#define bfin_read_PORTGIO_TOGGLE() bfin_read16(PORTGIO_TOGGLE) -#define bfin_write_PORTGIO_TOGGLE(val) bfin_write16(PORTGIO_TOGGLE, val) -#define bfin_read_PORTGIO_MASKA() bfin_read16(PORTGIO_MASKA) -#define bfin_write_PORTGIO_MASKA(val) bfin_write16(PORTGIO_MASKA, val) -#define bfin_read_PORTGIO_MASKA_CLEAR() bfin_read16(PORTGIO_MASKA_CLEAR) -#define bfin_write_PORTGIO_MASKA_CLEAR(val) bfin_write16(PORTGIO_MASKA_CLEAR, val) -#define bfin_read_PORTGIO_MASKA_SET() bfin_read16(PORTGIO_MASKA_SET) -#define bfin_write_PORTGIO_MASKA_SET(val) bfin_write16(PORTGIO_MASKA_SET, val) -#define bfin_read_PORTGIO_MASKA_TOGGLE() bfin_read16(PORTGIO_MASKA_TOGGLE) -#define bfin_write_PORTGIO_MASKA_TOGGLE(val) bfin_write16(PORTGIO_MASKA_TOGGLE, val) -#define bfin_read_PORTGIO_MASKB() bfin_read16(PORTGIO_MASKB) -#define bfin_write_PORTGIO_MASKB(val) bfin_write16(PORTGIO_MASKB, val) -#define bfin_read_PORTGIO_MASKB_CLEAR() bfin_read16(PORTGIO_MASKB_CLEAR) -#define bfin_write_PORTGIO_MASKB_CLEAR(val) bfin_write16(PORTGIO_MASKB_CLEAR, val) -#define bfin_read_PORTGIO_MASKB_SET() bfin_read16(PORTGIO_MASKB_SET) -#define bfin_write_PORTGIO_MASKB_SET(val) bfin_write16(PORTGIO_MASKB_SET, val) -#define bfin_read_PORTGIO_MASKB_TOGGLE() bfin_read16(PORTGIO_MASKB_TOGGLE) -#define bfin_write_PORTGIO_MASKB_TOGGLE(val) bfin_write16(PORTGIO_MASKB_TOGGLE, val) -#define bfin_read_PORTGIO_DIR() bfin_read16(PORTGIO_DIR) -#define bfin_write_PORTGIO_DIR(val) bfin_write16(PORTGIO_DIR, val) -#define bfin_read_PORTGIO_POLAR() bfin_read16(PORTGIO_POLAR) -#define bfin_write_PORTGIO_POLAR(val) bfin_write16(PORTGIO_POLAR, val) -#define bfin_read_PORTGIO_EDGE() bfin_read16(PORTGIO_EDGE) -#define bfin_write_PORTGIO_EDGE(val) bfin_write16(PORTGIO_EDGE, val) -#define bfin_read_PORTGIO_BOTH() bfin_read16(PORTGIO_BOTH) -#define bfin_write_PORTGIO_BOTH(val) bfin_write16(PORTGIO_BOTH, val) -#define bfin_read_PORTGIO_INEN() bfin_read16(PORTGIO_INEN) -#define bfin_write_PORTGIO_INEN(val) bfin_write16(PORTGIO_INEN, val) -#define bfin_read_PORTHIO() bfin_read16(PORTHIO) -#define bfin_write_PORTHIO(val) bfin_write16(PORTHIO, val) -#define bfin_read_PORTHIO_CLEAR() bfin_read16(PORTHIO_CLEAR) -#define bfin_write_PORTHIO_CLEAR(val) bfin_write16(PORTHIO_CLEAR, val) -#define bfin_read_PORTHIO_SET() bfin_read16(PORTHIO_SET) -#define bfin_write_PORTHIO_SET(val) bfin_write16(PORTHIO_SET, val) -#define bfin_read_PORTHIO_TOGGLE() bfin_read16(PORTHIO_TOGGLE) -#define bfin_write_PORTHIO_TOGGLE(val) bfin_write16(PORTHIO_TOGGLE, val) -#define bfin_read_PORTHIO_MASKA() bfin_read16(PORTHIO_MASKA) -#define bfin_write_PORTHIO_MASKA(val) bfin_write16(PORTHIO_MASKA, val) -#define bfin_read_PORTHIO_MASKA_CLEAR() bfin_read16(PORTHIO_MASKA_CLEAR) -#define bfin_write_PORTHIO_MASKA_CLEAR(val) bfin_write16(PORTHIO_MASKA_CLEAR, val) -#define bfin_read_PORTHIO_MASKA_SET() bfin_read16(PORTHIO_MASKA_SET) -#define bfin_write_PORTHIO_MASKA_SET(val) bfin_write16(PORTHIO_MASKA_SET, val) -#define bfin_read_PORTHIO_MASKA_TOGGLE() bfin_read16(PORTHIO_MASKA_TOGGLE) -#define bfin_write_PORTHIO_MASKA_TOGGLE(val) bfin_write16(PORTHIO_MASKA_TOGGLE, val) -#define bfin_read_PORTHIO_MASKB() bfin_read16(PORTHIO_MASKB) -#define bfin_write_PORTHIO_MASKB(val) bfin_write16(PORTHIO_MASKB, val) -#define bfin_read_PORTHIO_MASKB_CLEAR() bfin_read16(PORTHIO_MASKB_CLEAR) -#define bfin_write_PORTHIO_MASKB_CLEAR(val) bfin_write16(PORTHIO_MASKB_CLEAR, val) -#define bfin_read_PORTHIO_MASKB_SET() bfin_read16(PORTHIO_MASKB_SET) -#define bfin_write_PORTHIO_MASKB_SET(val) bfin_write16(PORTHIO_MASKB_SET, val) -#define bfin_read_PORTHIO_MASKB_TOGGLE() bfin_read16(PORTHIO_MASKB_TOGGLE) -#define bfin_write_PORTHIO_MASKB_TOGGLE(val) bfin_write16(PORTHIO_MASKB_TOGGLE, val) -#define bfin_read_PORTHIO_DIR() bfin_read16(PORTHIO_DIR) -#define bfin_write_PORTHIO_DIR(val) bfin_write16(PORTHIO_DIR, val) -#define bfin_read_PORTHIO_POLAR() bfin_read16(PORTHIO_POLAR) -#define bfin_write_PORTHIO_POLAR(val) bfin_write16(PORTHIO_POLAR, val) -#define bfin_read_PORTHIO_EDGE() bfin_read16(PORTHIO_EDGE) -#define bfin_write_PORTHIO_EDGE(val) bfin_write16(PORTHIO_EDGE, val) -#define bfin_read_PORTHIO_BOTH() bfin_read16(PORTHIO_BOTH) -#define bfin_write_PORTHIO_BOTH(val) bfin_write16(PORTHIO_BOTH, val) -#define bfin_read_PORTHIO_INEN() bfin_read16(PORTHIO_INEN) -#define bfin_write_PORTHIO_INEN(val) bfin_write16(PORTHIO_INEN, val) -#define bfin_read_UART1_THR() bfin_read16(UART1_THR) -#define bfin_write_UART1_THR(val) bfin_write16(UART1_THR, val) -#define bfin_read_UART1_RBR() bfin_read16(UART1_RBR) -#define bfin_write_UART1_RBR(val) bfin_write16(UART1_RBR, val) -#define bfin_read_UART1_DLL() bfin_read16(UART1_DLL) -#define bfin_write_UART1_DLL(val) bfin_write16(UART1_DLL, val) -#define bfin_read_UART1_IER() bfin_read16(UART1_IER) -#define bfin_write_UART1_IER(val) bfin_write16(UART1_IER, val) -#define bfin_read_UART1_DLH() bfin_read16(UART1_DLH) -#define bfin_write_UART1_DLH(val) bfin_write16(UART1_DLH, val) -#define bfin_read_UART1_IIR() bfin_read16(UART1_IIR) -#define bfin_write_UART1_IIR(val) bfin_write16(UART1_IIR, val) -#define bfin_read_UART1_LCR() bfin_read16(UART1_LCR) -#define bfin_write_UART1_LCR(val) bfin_write16(UART1_LCR, val) -#define bfin_read_UART1_MCR() bfin_read16(UART1_MCR) -#define bfin_write_UART1_MCR(val) bfin_write16(UART1_MCR, val) -#define bfin_read_UART1_LSR() bfin_read16(UART1_LSR) -#define bfin_write_UART1_LSR(val) bfin_write16(UART1_LSR, val) -#define bfin_read_UART1_MSR() bfin_read16(UART1_MSR) -#define bfin_write_UART1_MSR(val) bfin_write16(UART1_MSR, val) -#define bfin_read_UART1_SCR() bfin_read16(UART1_SCR) -#define bfin_write_UART1_SCR(val) bfin_write16(UART1_SCR, val) -#define bfin_read_UART1_GCTL() bfin_read16(UART1_GCTL) -#define bfin_write_UART1_GCTL(val) bfin_write16(UART1_GCTL, val) -#define bfin_read_CAN_MC1() bfin_read16(CAN_MC1) -#define bfin_write_CAN_MC1(val) bfin_write16(CAN_MC1, val) -#define bfin_read_CAN_MD1() bfin_read16(CAN_MD1) -#define bfin_write_CAN_MD1(val) bfin_write16(CAN_MD1, val) -#define bfin_read_CAN_TRS1() bfin_read16(CAN_TRS1) -#define bfin_write_CAN_TRS1(val) bfin_write16(CAN_TRS1, val) -#define bfin_read_CAN_TRR1() bfin_read16(CAN_TRR1) -#define bfin_write_CAN_TRR1(val) bfin_write16(CAN_TRR1, val) -#define bfin_read_CAN_TA1() bfin_read16(CAN_TA1) -#define bfin_write_CAN_TA1(val) bfin_write16(CAN_TA1, val) -#define bfin_read_CAN_AA1() bfin_read16(CAN_AA1) -#define bfin_write_CAN_AA1(val) bfin_write16(CAN_AA1, val) -#define bfin_read_CAN_RMP1() bfin_read16(CAN_RMP1) -#define bfin_write_CAN_RMP1(val) bfin_write16(CAN_RMP1, val) -#define bfin_read_CAN_RML1() bfin_read16(CAN_RML1) -#define bfin_write_CAN_RML1(val) bfin_write16(CAN_RML1, val) -#define bfin_read_CAN_MBTIF1() bfin_read16(CAN_MBTIF1) -#define bfin_write_CAN_MBTIF1(val) bfin_write16(CAN_MBTIF1, val) -#define bfin_read_CAN_MBRIF1() bfin_read16(CAN_MBRIF1) -#define bfin_write_CAN_MBRIF1(val) bfin_write16(CAN_MBRIF1, val) -#define bfin_read_CAN_MBIM1() bfin_read16(CAN_MBIM1) -#define bfin_write_CAN_MBIM1(val) bfin_write16(CAN_MBIM1, val) -#define bfin_read_CAN_RFH1() bfin_read16(CAN_RFH1) -#define bfin_write_CAN_RFH1(val) bfin_write16(CAN_RFH1, val) -#define bfin_read_CAN_OPSS1() bfin_read16(CAN_OPSS1) -#define bfin_write_CAN_OPSS1(val) bfin_write16(CAN_OPSS1, val) -#define bfin_read_CAN_MC2() bfin_read16(CAN_MC2) -#define bfin_write_CAN_MC2(val) bfin_write16(CAN_MC2, val) -#define bfin_read_CAN_MD2() bfin_read16(CAN_MD2) -#define bfin_write_CAN_MD2(val) bfin_write16(CAN_MD2, val) -#define bfin_read_CAN_TRS2() bfin_read16(CAN_TRS2) -#define bfin_write_CAN_TRS2(val) bfin_write16(CAN_TRS2, val) -#define bfin_read_CAN_TRR2() bfin_read16(CAN_TRR2) -#define bfin_write_CAN_TRR2(val) bfin_write16(CAN_TRR2, val) -#define bfin_read_CAN_TA2() bfin_read16(CAN_TA2) -#define bfin_write_CAN_TA2(val) bfin_write16(CAN_TA2, val) -#define bfin_read_CAN_AA2() bfin_read16(CAN_AA2) -#define bfin_write_CAN_AA2(val) bfin_write16(CAN_AA2, val) -#define bfin_read_CAN_RMP2() bfin_read16(CAN_RMP2) -#define bfin_write_CAN_RMP2(val) bfin_write16(CAN_RMP2, val) -#define bfin_read_CAN_RML2() bfin_read16(CAN_RML2) -#define bfin_write_CAN_RML2(val) bfin_write16(CAN_RML2, val) -#define bfin_read_CAN_MBTIF2() bfin_read16(CAN_MBTIF2) -#define bfin_write_CAN_MBTIF2(val) bfin_write16(CAN_MBTIF2, val) -#define bfin_read_CAN_MBRIF2() bfin_read16(CAN_MBRIF2) -#define bfin_write_CAN_MBRIF2(val) bfin_write16(CAN_MBRIF2, val) -#define bfin_read_CAN_MBIM2() bfin_read16(CAN_MBIM2) -#define bfin_write_CAN_MBIM2(val) bfin_write16(CAN_MBIM2, val) -#define bfin_read_CAN_RFH2() bfin_read16(CAN_RFH2) -#define bfin_write_CAN_RFH2(val) bfin_write16(CAN_RFH2, val) -#define bfin_read_CAN_OPSS2() bfin_read16(CAN_OPSS2) -#define bfin_write_CAN_OPSS2(val) bfin_write16(CAN_OPSS2, val) -#define bfin_read_CAN_CLOCK() bfin_read16(CAN_CLOCK) -#define bfin_write_CAN_CLOCK(val) bfin_write16(CAN_CLOCK, val) -#define bfin_read_CAN_TIMING() bfin_read16(CAN_TIMING) -#define bfin_write_CAN_TIMING(val) bfin_write16(CAN_TIMING, val) -#define bfin_read_CAN_DEBUG() bfin_read16(CAN_DEBUG) -#define bfin_write_CAN_DEBUG(val) bfin_write16(CAN_DEBUG, val) -#define bfin_read_CAN_STATUS() bfin_read16(CAN_STATUS) -#define bfin_write_CAN_STATUS(val) bfin_write16(CAN_STATUS, val) -#define bfin_read_CAN_CEC() bfin_read16(CAN_CEC) -#define bfin_write_CAN_CEC(val) bfin_write16(CAN_CEC, val) -#define bfin_read_CAN_GIS() bfin_read16(CAN_GIS) -#define bfin_write_CAN_GIS(val) bfin_write16(CAN_GIS, val) -#define bfin_read_CAN_GIM() bfin_read16(CAN_GIM) -#define bfin_write_CAN_GIM(val) bfin_write16(CAN_GIM, val) -#define bfin_read_CAN_GIF() bfin_read16(CAN_GIF) -#define bfin_write_CAN_GIF(val) bfin_write16(CAN_GIF, val) -#define bfin_read_CAN_CONTROL() bfin_read16(CAN_CONTROL) -#define bfin_write_CAN_CONTROL(val) bfin_write16(CAN_CONTROL, val) -#define bfin_read_CAN_INTR() bfin_read16(CAN_INTR) -#define bfin_write_CAN_INTR(val) bfin_write16(CAN_INTR, val) -#define bfin_read_CAN_VERSION() bfin_read16(CAN_VERSION) -#define bfin_write_CAN_VERSION(val) bfin_write16(CAN_VERSION, val) -#define bfin_read_CAN_MBTD() bfin_read16(CAN_MBTD) -#define bfin_write_CAN_MBTD(val) bfin_write16(CAN_MBTD, val) -#define bfin_read_CAN_EWR() bfin_read16(CAN_EWR) -#define bfin_write_CAN_EWR(val) bfin_write16(CAN_EWR, val) -#define bfin_read_CAN_ESR() bfin_read16(CAN_ESR) -#define bfin_write_CAN_ESR(val) bfin_write16(CAN_ESR, val) -#define bfin_read_CAN_UCREG() bfin_read16(CAN_UCREG) -#define bfin_write_CAN_UCREG(val) bfin_write16(CAN_UCREG, val) -#define bfin_read_CAN_UCCNT() bfin_read16(CAN_UCCNT) -#define bfin_write_CAN_UCCNT(val) bfin_write16(CAN_UCCNT, val) -#define bfin_read_CAN_UCRC() bfin_read16(CAN_UCRC) -#define bfin_write_CAN_UCRC(val) bfin_write16(CAN_UCRC, val) -#define bfin_read_CAN_UCCNF() bfin_read16(CAN_UCCNF) -#define bfin_write_CAN_UCCNF(val) bfin_write16(CAN_UCCNF, val) -#define bfin_read_CAN_VERSION2() bfin_read16(CAN_VERSION2) -#define bfin_write_CAN_VERSION2(val) bfin_write16(CAN_VERSION2, val) -#define bfin_read_CAN_AM00L() bfin_read16(CAN_AM00L) -#define bfin_write_CAN_AM00L(val) bfin_write16(CAN_AM00L, val) -#define bfin_read_CAN_AM00H() bfin_read16(CAN_AM00H) -#define bfin_write_CAN_AM00H(val) bfin_write16(CAN_AM00H, val) -#define bfin_read_CAN_AM01L() bfin_read16(CAN_AM01L) -#define bfin_write_CAN_AM01L(val) bfin_write16(CAN_AM01L, val) -#define bfin_read_CAN_AM01H() bfin_read16(CAN_AM01H) -#define bfin_write_CAN_AM01H(val) bfin_write16(CAN_AM01H, val) -#define bfin_read_CAN_AM02L() bfin_read16(CAN_AM02L) -#define bfin_write_CAN_AM02L(val) bfin_write16(CAN_AM02L, val) -#define bfin_read_CAN_AM02H() bfin_read16(CAN_AM02H) -#define bfin_write_CAN_AM02H(val) bfin_write16(CAN_AM02H, val) -#define bfin_read_CAN_AM03L() bfin_read16(CAN_AM03L) -#define bfin_write_CAN_AM03L(val) bfin_write16(CAN_AM03L, val) -#define bfin_read_CAN_AM03H() bfin_read16(CAN_AM03H) -#define bfin_write_CAN_AM03H(val) bfin_write16(CAN_AM03H, val) -#define bfin_read_CAN_AM04L() bfin_read16(CAN_AM04L) -#define bfin_write_CAN_AM04L(val) bfin_write16(CAN_AM04L, val) -#define bfin_read_CAN_AM04H() bfin_read16(CAN_AM04H) -#define bfin_write_CAN_AM04H(val) bfin_write16(CAN_AM04H, val) -#define bfin_read_CAN_AM05L() bfin_read16(CAN_AM05L) -#define bfin_write_CAN_AM05L(val) bfin_write16(CAN_AM05L, val) -#define bfin_read_CAN_AM05H() bfin_read16(CAN_AM05H) -#define bfin_write_CAN_AM05H(val) bfin_write16(CAN_AM05H, val) -#define bfin_read_CAN_AM06L() bfin_read16(CAN_AM06L) -#define bfin_write_CAN_AM06L(val) bfin_write16(CAN_AM06L, val) -#define bfin_read_CAN_AM06H() bfin_read16(CAN_AM06H) -#define bfin_write_CAN_AM06H(val) bfin_write16(CAN_AM06H, val) -#define bfin_read_CAN_AM07L() bfin_read16(CAN_AM07L) -#define bfin_write_CAN_AM07L(val) bfin_write16(CAN_AM07L, val) -#define bfin_read_CAN_AM07H() bfin_read16(CAN_AM07H) -#define bfin_write_CAN_AM07H(val) bfin_write16(CAN_AM07H, val) -#define bfin_read_CAN_AM08L() bfin_read16(CAN_AM08L) -#define bfin_write_CAN_AM08L(val) bfin_write16(CAN_AM08L, val) -#define bfin_read_CAN_AM08H() bfin_read16(CAN_AM08H) -#define bfin_write_CAN_AM08H(val) bfin_write16(CAN_AM08H, val) -#define bfin_read_CAN_AM09L() bfin_read16(CAN_AM09L) -#define bfin_write_CAN_AM09L(val) bfin_write16(CAN_AM09L, val) -#define bfin_read_CAN_AM09H() bfin_read16(CAN_AM09H) -#define bfin_write_CAN_AM09H(val) bfin_write16(CAN_AM09H, val) -#define bfin_read_CAN_AM10L() bfin_read16(CAN_AM10L) -#define bfin_write_CAN_AM10L(val) bfin_write16(CAN_AM10L, val) -#define bfin_read_CAN_AM10H() bfin_read16(CAN_AM10H) -#define bfin_write_CAN_AM10H(val) bfin_write16(CAN_AM10H, val) -#define bfin_read_CAN_AM11L() bfin_read16(CAN_AM11L) -#define bfin_write_CAN_AM11L(val) bfin_write16(CAN_AM11L, val) -#define bfin_read_CAN_AM11H() bfin_read16(CAN_AM11H) -#define bfin_write_CAN_AM11H(val) bfin_write16(CAN_AM11H, val) -#define bfin_read_CAN_AM12L() bfin_read16(CAN_AM12L) -#define bfin_write_CAN_AM12L(val) bfin_write16(CAN_AM12L, val) -#define bfin_read_CAN_AM12H() bfin_read16(CAN_AM12H) -#define bfin_write_CAN_AM12H(val) bfin_write16(CAN_AM12H, val) -#define bfin_read_CAN_AM13L() bfin_read16(CAN_AM13L) -#define bfin_write_CAN_AM13L(val) bfin_write16(CAN_AM13L, val) -#define bfin_read_CAN_AM13H() bfin_read16(CAN_AM13H) -#define bfin_write_CAN_AM13H(val) bfin_write16(CAN_AM13H, val) -#define bfin_read_CAN_AM14L() bfin_read16(CAN_AM14L) -#define bfin_write_CAN_AM14L(val) bfin_write16(CAN_AM14L, val) -#define bfin_read_CAN_AM14H() bfin_read16(CAN_AM14H) -#define bfin_write_CAN_AM14H(val) bfin_write16(CAN_AM14H, val) -#define bfin_read_CAN_AM15L() bfin_read16(CAN_AM15L) -#define bfin_write_CAN_AM15L(val) bfin_write16(CAN_AM15L, val) -#define bfin_read_CAN_AM15H() bfin_read16(CAN_AM15H) -#define bfin_write_CAN_AM15H(val) bfin_write16(CAN_AM15H, val) -#define bfin_read_CAN_AM16L() bfin_read16(CAN_AM16L) -#define bfin_write_CAN_AM16L(val) bfin_write16(CAN_AM16L, val) -#define bfin_read_CAN_AM16H() bfin_read16(CAN_AM16H) -#define bfin_write_CAN_AM16H(val) bfin_write16(CAN_AM16H, val) -#define bfin_read_CAN_AM17L() bfin_read16(CAN_AM17L) -#define bfin_write_CAN_AM17L(val) bfin_write16(CAN_AM17L, val) -#define bfin_read_CAN_AM17H() bfin_read16(CAN_AM17H) -#define bfin_write_CAN_AM17H(val) bfin_write16(CAN_AM17H, val) -#define bfin_read_CAN_AM18L() bfin_read16(CAN_AM18L) -#define bfin_write_CAN_AM18L(val) bfin_write16(CAN_AM18L, val) -#define bfin_read_CAN_AM18H() bfin_read16(CAN_AM18H) -#define bfin_write_CAN_AM18H(val) bfin_write16(CAN_AM18H, val) -#define bfin_read_CAN_AM19L() bfin_read16(CAN_AM19L) -#define bfin_write_CAN_AM19L(val) bfin_write16(CAN_AM19L, val) -#define bfin_read_CAN_AM19H() bfin_read16(CAN_AM19H) -#define bfin_write_CAN_AM19H(val) bfin_write16(CAN_AM19H, val) -#define bfin_read_CAN_AM20L() bfin_read16(CAN_AM20L) -#define bfin_write_CAN_AM20L(val) bfin_write16(CAN_AM20L, val) -#define bfin_read_CAN_AM20H() bfin_read16(CAN_AM20H) -#define bfin_write_CAN_AM20H(val) bfin_write16(CAN_AM20H, val) -#define bfin_read_CAN_AM21L() bfin_read16(CAN_AM21L) -#define bfin_write_CAN_AM21L(val) bfin_write16(CAN_AM21L, val) -#define bfin_read_CAN_AM21H() bfin_read16(CAN_AM21H) -#define bfin_write_CAN_AM21H(val) bfin_write16(CAN_AM21H, val) -#define bfin_read_CAN_AM22L() bfin_read16(CAN_AM22L) -#define bfin_write_CAN_AM22L(val) bfin_write16(CAN_AM22L, val) -#define bfin_read_CAN_AM22H() bfin_read16(CAN_AM22H) -#define bfin_write_CAN_AM22H(val) bfin_write16(CAN_AM22H, val) -#define bfin_read_CAN_AM23L() bfin_read16(CAN_AM23L) -#define bfin_write_CAN_AM23L(val) bfin_write16(CAN_AM23L, val) -#define bfin_read_CAN_AM23H() bfin_read16(CAN_AM23H) -#define bfin_write_CAN_AM23H(val) bfin_write16(CAN_AM23H, val) -#define bfin_read_CAN_AM24L() bfin_read16(CAN_AM24L) -#define bfin_write_CAN_AM24L(val) bfin_write16(CAN_AM24L, val) -#define bfin_read_CAN_AM24H() bfin_read16(CAN_AM24H) -#define bfin_write_CAN_AM24H(val) bfin_write16(CAN_AM24H, val) -#define bfin_read_CAN_AM25L() bfin_read16(CAN_AM25L) -#define bfin_write_CAN_AM25L(val) bfin_write16(CAN_AM25L, val) -#define bfin_read_CAN_AM25H() bfin_read16(CAN_AM25H) -#define bfin_write_CAN_AM25H(val) bfin_write16(CAN_AM25H, val) -#define bfin_read_CAN_AM26L() bfin_read16(CAN_AM26L) -#define bfin_write_CAN_AM26L(val) bfin_write16(CAN_AM26L, val) -#define bfin_read_CAN_AM26H() bfin_read16(CAN_AM26H) -#define bfin_write_CAN_AM26H(val) bfin_write16(CAN_AM26H, val) -#define bfin_read_CAN_AM27L() bfin_read16(CAN_AM27L) -#define bfin_write_CAN_AM27L(val) bfin_write16(CAN_AM27L, val) -#define bfin_read_CAN_AM27H() bfin_read16(CAN_AM27H) -#define bfin_write_CAN_AM27H(val) bfin_write16(CAN_AM27H, val) -#define bfin_read_CAN_AM28L() bfin_read16(CAN_AM28L) -#define bfin_write_CAN_AM28L(val) bfin_write16(CAN_AM28L, val) -#define bfin_read_CAN_AM28H() bfin_read16(CAN_AM28H) -#define bfin_write_CAN_AM28H(val) bfin_write16(CAN_AM28H, val) -#define bfin_read_CAN_AM29L() bfin_read16(CAN_AM29L) -#define bfin_write_CAN_AM29L(val) bfin_write16(CAN_AM29L, val) -#define bfin_read_CAN_AM29H() bfin_read16(CAN_AM29H) -#define bfin_write_CAN_AM29H(val) bfin_write16(CAN_AM29H, val) -#define bfin_read_CAN_AM30L() bfin_read16(CAN_AM30L) -#define bfin_write_CAN_AM30L(val) bfin_write16(CAN_AM30L, val) -#define bfin_read_CAN_AM30H() bfin_read16(CAN_AM30H) -#define bfin_write_CAN_AM30H(val) bfin_write16(CAN_AM30H, val) -#define bfin_read_CAN_AM31L() bfin_read16(CAN_AM31L) -#define bfin_write_CAN_AM31L(val) bfin_write16(CAN_AM31L, val) -#define bfin_read_CAN_AM31H() bfin_read16(CAN_AM31H) -#define bfin_write_CAN_AM31H(val) bfin_write16(CAN_AM31H, val) -#define bfin_read_CAN_MB00_DATA0() bfin_read16(CAN_MB00_DATA0) -#define bfin_write_CAN_MB00_DATA0(val) bfin_write16(CAN_MB00_DATA0, val) -#define bfin_read_CAN_MB00_DATA1() bfin_read16(CAN_MB00_DATA1) -#define bfin_write_CAN_MB00_DATA1(val) bfin_write16(CAN_MB00_DATA1, val) -#define bfin_read_CAN_MB00_DATA2() bfin_read16(CAN_MB00_DATA2) -#define bfin_write_CAN_MB00_DATA2(val) bfin_write16(CAN_MB00_DATA2, val) -#define bfin_read_CAN_MB00_DATA3() bfin_read16(CAN_MB00_DATA3) -#define bfin_write_CAN_MB00_DATA3(val) bfin_write16(CAN_MB00_DATA3, val) -#define bfin_read_CAN_MB00_LENGTH() bfin_read16(CAN_MB00_LENGTH) -#define bfin_write_CAN_MB00_LENGTH(val) bfin_write16(CAN_MB00_LENGTH, val) -#define bfin_read_CAN_MB00_TIMESTAMP() bfin_read16(CAN_MB00_TIMESTAMP) -#define bfin_write_CAN_MB00_TIMESTAMP(val) bfin_write16(CAN_MB00_TIMESTAMP, val) -#define bfin_read_CAN_MB00_ID0() bfin_read16(CAN_MB00_ID0) -#define bfin_write_CAN_MB00_ID0(val) bfin_write16(CAN_MB00_ID0, val) -#define bfin_read_CAN_MB00_ID1() bfin_read16(CAN_MB00_ID1) -#define bfin_write_CAN_MB00_ID1(val) bfin_write16(CAN_MB00_ID1, val) -#define bfin_read_CAN_MB01_DATA0() bfin_read16(CAN_MB01_DATA0) -#define bfin_write_CAN_MB01_DATA0(val) bfin_write16(CAN_MB01_DATA0, val) -#define bfin_read_CAN_MB01_DATA1() bfin_read16(CAN_MB01_DATA1) -#define bfin_write_CAN_MB01_DATA1(val) bfin_write16(CAN_MB01_DATA1, val) -#define bfin_read_CAN_MB01_DATA2() bfin_read16(CAN_MB01_DATA2) -#define bfin_write_CAN_MB01_DATA2(val) bfin_write16(CAN_MB01_DATA2, val) -#define bfin_read_CAN_MB01_DATA3() bfin_read16(CAN_MB01_DATA3) -#define bfin_write_CAN_MB01_DATA3(val) bfin_write16(CAN_MB01_DATA3, val) -#define bfin_read_CAN_MB01_LENGTH() bfin_read16(CAN_MB01_LENGTH) -#define bfin_write_CAN_MB01_LENGTH(val) bfin_write16(CAN_MB01_LENGTH, val) -#define bfin_read_CAN_MB01_TIMESTAMP() bfin_read16(CAN_MB01_TIMESTAMP) -#define bfin_write_CAN_MB01_TIMESTAMP(val) bfin_write16(CAN_MB01_TIMESTAMP, val) -#define bfin_read_CAN_MB01_ID0() bfin_read16(CAN_MB01_ID0) -#define bfin_write_CAN_MB01_ID0(val) bfin_write16(CAN_MB01_ID0, val) -#define bfin_read_CAN_MB01_ID1() bfin_read16(CAN_MB01_ID1) -#define bfin_write_CAN_MB01_ID1(val) bfin_write16(CAN_MB01_ID1, val) -#define bfin_read_CAN_MB02_DATA0() bfin_read16(CAN_MB02_DATA0) -#define bfin_write_CAN_MB02_DATA0(val) bfin_write16(CAN_MB02_DATA0, val) -#define bfin_read_CAN_MB02_DATA1() bfin_read16(CAN_MB02_DATA1) -#define bfin_write_CAN_MB02_DATA1(val) bfin_write16(CAN_MB02_DATA1, val) -#define bfin_read_CAN_MB02_DATA2() bfin_read16(CAN_MB02_DATA2) -#define bfin_write_CAN_MB02_DATA2(val) bfin_write16(CAN_MB02_DATA2, val) -#define bfin_read_CAN_MB02_DATA3() bfin_read16(CAN_MB02_DATA3) -#define bfin_write_CAN_MB02_DATA3(val) bfin_write16(CAN_MB02_DATA3, val) -#define bfin_read_CAN_MB02_LENGTH() bfin_read16(CAN_MB02_LENGTH) -#define bfin_write_CAN_MB02_LENGTH(val) bfin_write16(CAN_MB02_LENGTH, val) -#define bfin_read_CAN_MB02_TIMESTAMP() bfin_read16(CAN_MB02_TIMESTAMP) -#define bfin_write_CAN_MB02_TIMESTAMP(val) bfin_write16(CAN_MB02_TIMESTAMP, val) -#define bfin_read_CAN_MB02_ID0() bfin_read16(CAN_MB02_ID0) -#define bfin_write_CAN_MB02_ID0(val) bfin_write16(CAN_MB02_ID0, val) -#define bfin_read_CAN_MB02_ID1() bfin_read16(CAN_MB02_ID1) -#define bfin_write_CAN_MB02_ID1(val) bfin_write16(CAN_MB02_ID1, val) -#define bfin_read_CAN_MB03_DATA0() bfin_read16(CAN_MB03_DATA0) -#define bfin_write_CAN_MB03_DATA0(val) bfin_write16(CAN_MB03_DATA0, val) -#define bfin_read_CAN_MB03_DATA1() bfin_read16(CAN_MB03_DATA1) -#define bfin_write_CAN_MB03_DATA1(val) bfin_write16(CAN_MB03_DATA1, val) -#define bfin_read_CAN_MB03_DATA2() bfin_read16(CAN_MB03_DATA2) -#define bfin_write_CAN_MB03_DATA2(val) bfin_write16(CAN_MB03_DATA2, val) -#define bfin_read_CAN_MB03_DATA3() bfin_read16(CAN_MB03_DATA3) -#define bfin_write_CAN_MB03_DATA3(val) bfin_write16(CAN_MB03_DATA3, val) -#define bfin_read_CAN_MB03_LENGTH() bfin_read16(CAN_MB03_LENGTH) -#define bfin_write_CAN_MB03_LENGTH(val) bfin_write16(CAN_MB03_LENGTH, val) -#define bfin_read_CAN_MB03_TIMESTAMP() bfin_read16(CAN_MB03_TIMESTAMP) -#define bfin_write_CAN_MB03_TIMESTAMP(val) bfin_write16(CAN_MB03_TIMESTAMP, val) -#define bfin_read_CAN_MB03_ID0() bfin_read16(CAN_MB03_ID0) -#define bfin_write_CAN_MB03_ID0(val) bfin_write16(CAN_MB03_ID0, val) -#define bfin_read_CAN_MB03_ID1() bfin_read16(CAN_MB03_ID1) -#define bfin_write_CAN_MB03_ID1(val) bfin_write16(CAN_MB03_ID1, val) -#define bfin_read_CAN_MB04_DATA0() bfin_read16(CAN_MB04_DATA0) -#define bfin_write_CAN_MB04_DATA0(val) bfin_write16(CAN_MB04_DATA0, val) -#define bfin_read_CAN_MB04_DATA1() bfin_read16(CAN_MB04_DATA1) -#define bfin_write_CAN_MB04_DATA1(val) bfin_write16(CAN_MB04_DATA1, val) -#define bfin_read_CAN_MB04_DATA2() bfin_read16(CAN_MB04_DATA2) -#define bfin_write_CAN_MB04_DATA2(val) bfin_write16(CAN_MB04_DATA2, val) -#define bfin_read_CAN_MB04_DATA3() bfin_read16(CAN_MB04_DATA3) -#define bfin_write_CAN_MB04_DATA3(val) bfin_write16(CAN_MB04_DATA3, val) -#define bfin_read_CAN_MB04_LENGTH() bfin_read16(CAN_MB04_LENGTH) -#define bfin_write_CAN_MB04_LENGTH(val) bfin_write16(CAN_MB04_LENGTH, val) -#define bfin_read_CAN_MB04_TIMESTAMP() bfin_read16(CAN_MB04_TIMESTAMP) -#define bfin_write_CAN_MB04_TIMESTAMP(val) bfin_write16(CAN_MB04_TIMESTAMP, val) -#define bfin_read_CAN_MB04_ID0() bfin_read16(CAN_MB04_ID0) -#define bfin_write_CAN_MB04_ID0(val) bfin_write16(CAN_MB04_ID0, val) -#define bfin_read_CAN_MB04_ID1() bfin_read16(CAN_MB04_ID1) -#define bfin_write_CAN_MB04_ID1(val) bfin_write16(CAN_MB04_ID1, val) -#define bfin_read_CAN_MB05_DATA0() bfin_read16(CAN_MB05_DATA0) -#define bfin_write_CAN_MB05_DATA0(val) bfin_write16(CAN_MB05_DATA0, val) -#define bfin_read_CAN_MB05_DATA1() bfin_read16(CAN_MB05_DATA1) -#define bfin_write_CAN_MB05_DATA1(val) bfin_write16(CAN_MB05_DATA1, val) -#define bfin_read_CAN_MB05_DATA2() bfin_read16(CAN_MB05_DATA2) -#define bfin_write_CAN_MB05_DATA2(val) bfin_write16(CAN_MB05_DATA2, val) -#define bfin_read_CAN_MB05_DATA3() bfin_read16(CAN_MB05_DATA3) -#define bfin_write_CAN_MB05_DATA3(val) bfin_write16(CAN_MB05_DATA3, val) -#define bfin_read_CAN_MB05_LENGTH() bfin_read16(CAN_MB05_LENGTH) -#define bfin_write_CAN_MB05_LENGTH(val) bfin_write16(CAN_MB05_LENGTH, val) -#define bfin_read_CAN_MB05_TIMESTAMP() bfin_read16(CAN_MB05_TIMESTAMP) -#define bfin_write_CAN_MB05_TIMESTAMP(val) bfin_write16(CAN_MB05_TIMESTAMP, val) -#define bfin_read_CAN_MB05_ID0() bfin_read16(CAN_MB05_ID0) -#define bfin_write_CAN_MB05_ID0(val) bfin_write16(CAN_MB05_ID0, val) -#define bfin_read_CAN_MB05_ID1() bfin_read16(CAN_MB05_ID1) -#define bfin_write_CAN_MB05_ID1(val) bfin_write16(CAN_MB05_ID1, val) -#define bfin_read_CAN_MB06_DATA0() bfin_read16(CAN_MB06_DATA0) -#define bfin_write_CAN_MB06_DATA0(val) bfin_write16(CAN_MB06_DATA0, val) -#define bfin_read_CAN_MB06_DATA1() bfin_read16(CAN_MB06_DATA1) -#define bfin_write_CAN_MB06_DATA1(val) bfin_write16(CAN_MB06_DATA1, val) -#define bfin_read_CAN_MB06_DATA2() bfin_read16(CAN_MB06_DATA2) -#define bfin_write_CAN_MB06_DATA2(val) bfin_write16(CAN_MB06_DATA2, val) -#define bfin_read_CAN_MB06_DATA3() bfin_read16(CAN_MB06_DATA3) -#define bfin_write_CAN_MB06_DATA3(val) bfin_write16(CAN_MB06_DATA3, val) -#define bfin_read_CAN_MB06_LENGTH() bfin_read16(CAN_MB06_LENGTH) -#define bfin_write_CAN_MB06_LENGTH(val) bfin_write16(CAN_MB06_LENGTH, val) -#define bfin_read_CAN_MB06_TIMESTAMP() bfin_read16(CAN_MB06_TIMESTAMP) -#define bfin_write_CAN_MB06_TIMESTAMP(val) bfin_write16(CAN_MB06_TIMESTAMP, val) -#define bfin_read_CAN_MB06_ID0() bfin_read16(CAN_MB06_ID0) -#define bfin_write_CAN_MB06_ID0(val) bfin_write16(CAN_MB06_ID0, val) -#define bfin_read_CAN_MB06_ID1() bfin_read16(CAN_MB06_ID1) -#define bfin_write_CAN_MB06_ID1(val) bfin_write16(CAN_MB06_ID1, val) -#define bfin_read_CAN_MB07_DATA0() bfin_read16(CAN_MB07_DATA0) -#define bfin_write_CAN_MB07_DATA0(val) bfin_write16(CAN_MB07_DATA0, val) -#define bfin_read_CAN_MB07_DATA1() bfin_read16(CAN_MB07_DATA1) -#define bfin_write_CAN_MB07_DATA1(val) bfin_write16(CAN_MB07_DATA1, val) -#define bfin_read_CAN_MB07_DATA2() bfin_read16(CAN_MB07_DATA2) -#define bfin_write_CAN_MB07_DATA2(val) bfin_write16(CAN_MB07_DATA2, val) -#define bfin_read_CAN_MB07_DATA3() bfin_read16(CAN_MB07_DATA3) -#define bfin_write_CAN_MB07_DATA3(val) bfin_write16(CAN_MB07_DATA3, val) -#define bfin_read_CAN_MB07_LENGTH() bfin_read16(CAN_MB07_LENGTH) -#define bfin_write_CAN_MB07_LENGTH(val) bfin_write16(CAN_MB07_LENGTH, val) -#define bfin_read_CAN_MB07_TIMESTAMP() bfin_read16(CAN_MB07_TIMESTAMP) -#define bfin_write_CAN_MB07_TIMESTAMP(val) bfin_write16(CAN_MB07_TIMESTAMP, val) -#define bfin_read_CAN_MB07_ID0() bfin_read16(CAN_MB07_ID0) -#define bfin_write_CAN_MB07_ID0(val) bfin_write16(CAN_MB07_ID0, val) -#define bfin_read_CAN_MB07_ID1() bfin_read16(CAN_MB07_ID1) -#define bfin_write_CAN_MB07_ID1(val) bfin_write16(CAN_MB07_ID1, val) -#define bfin_read_CAN_MB08_DATA0() bfin_read16(CAN_MB08_DATA0) -#define bfin_write_CAN_MB08_DATA0(val) bfin_write16(CAN_MB08_DATA0, val) -#define bfin_read_CAN_MB08_DATA1() bfin_read16(CAN_MB08_DATA1) -#define bfin_write_CAN_MB08_DATA1(val) bfin_write16(CAN_MB08_DATA1, val) -#define bfin_read_CAN_MB08_DATA2() bfin_read16(CAN_MB08_DATA2) -#define bfin_write_CAN_MB08_DATA2(val) bfin_write16(CAN_MB08_DATA2, val) -#define bfin_read_CAN_MB08_DATA3() bfin_read16(CAN_MB08_DATA3) -#define bfin_write_CAN_MB08_DATA3(val) bfin_write16(CAN_MB08_DATA3, val) -#define bfin_read_CAN_MB08_LENGTH() bfin_read16(CAN_MB08_LENGTH) -#define bfin_write_CAN_MB08_LENGTH(val) bfin_write16(CAN_MB08_LENGTH, val) -#define bfin_read_CAN_MB08_TIMESTAMP() bfin_read16(CAN_MB08_TIMESTAMP) -#define bfin_write_CAN_MB08_TIMESTAMP(val) bfin_write16(CAN_MB08_TIMESTAMP, val) -#define bfin_read_CAN_MB08_ID0() bfin_read16(CAN_MB08_ID0) -#define bfin_write_CAN_MB08_ID0(val) bfin_write16(CAN_MB08_ID0, val) -#define bfin_read_CAN_MB08_ID1() bfin_read16(CAN_MB08_ID1) -#define bfin_write_CAN_MB08_ID1(val) bfin_write16(CAN_MB08_ID1, val) -#define bfin_read_CAN_MB09_DATA0() bfin_read16(CAN_MB09_DATA0) -#define bfin_write_CAN_MB09_DATA0(val) bfin_write16(CAN_MB09_DATA0, val) -#define bfin_read_CAN_MB09_DATA1() bfin_read16(CAN_MB09_DATA1) -#define bfin_write_CAN_MB09_DATA1(val) bfin_write16(CAN_MB09_DATA1, val) -#define bfin_read_CAN_MB09_DATA2() bfin_read16(CAN_MB09_DATA2) -#define bfin_write_CAN_MB09_DATA2(val) bfin_write16(CAN_MB09_DATA2, val) -#define bfin_read_CAN_MB09_DATA3() bfin_read16(CAN_MB09_DATA3) -#define bfin_write_CAN_MB09_DATA3(val) bfin_write16(CAN_MB09_DATA3, val) -#define bfin_read_CAN_MB09_LENGTH() bfin_read16(CAN_MB09_LENGTH) -#define bfin_write_CAN_MB09_LENGTH(val) bfin_write16(CAN_MB09_LENGTH, val) -#define bfin_read_CAN_MB09_TIMESTAMP() bfin_read16(CAN_MB09_TIMESTAMP) -#define bfin_write_CAN_MB09_TIMESTAMP(val) bfin_write16(CAN_MB09_TIMESTAMP, val) -#define bfin_read_CAN_MB09_ID0() bfin_read16(CAN_MB09_ID0) -#define bfin_write_CAN_MB09_ID0(val) bfin_write16(CAN_MB09_ID0, val) -#define bfin_read_CAN_MB09_ID1() bfin_read16(CAN_MB09_ID1) -#define bfin_write_CAN_MB09_ID1(val) bfin_write16(CAN_MB09_ID1, val) -#define bfin_read_CAN_MB10_DATA0() bfin_read16(CAN_MB10_DATA0) -#define bfin_write_CAN_MB10_DATA0(val) bfin_write16(CAN_MB10_DATA0, val) -#define bfin_read_CAN_MB10_DATA1() bfin_read16(CAN_MB10_DATA1) -#define bfin_write_CAN_MB10_DATA1(val) bfin_write16(CAN_MB10_DATA1, val) -#define bfin_read_CAN_MB10_DATA2() bfin_read16(CAN_MB10_DATA2) -#define bfin_write_CAN_MB10_DATA2(val) bfin_write16(CAN_MB10_DATA2, val) -#define bfin_read_CAN_MB10_DATA3() bfin_read16(CAN_MB10_DATA3) -#define bfin_write_CAN_MB10_DATA3(val) bfin_write16(CAN_MB10_DATA3, val) -#define bfin_read_CAN_MB10_LENGTH() bfin_read16(CAN_MB10_LENGTH) -#define bfin_write_CAN_MB10_LENGTH(val) bfin_write16(CAN_MB10_LENGTH, val) -#define bfin_read_CAN_MB10_TIMESTAMP() bfin_read16(CAN_MB10_TIMESTAMP) -#define bfin_write_CAN_MB10_TIMESTAMP(val) bfin_write16(CAN_MB10_TIMESTAMP, val) -#define bfin_read_CAN_MB10_ID0() bfin_read16(CAN_MB10_ID0) -#define bfin_write_CAN_MB10_ID0(val) bfin_write16(CAN_MB10_ID0, val) -#define bfin_read_CAN_MB10_ID1() bfin_read16(CAN_MB10_ID1) -#define bfin_write_CAN_MB10_ID1(val) bfin_write16(CAN_MB10_ID1, val) -#define bfin_read_CAN_MB11_DATA0() bfin_read16(CAN_MB11_DATA0) -#define bfin_write_CAN_MB11_DATA0(val) bfin_write16(CAN_MB11_DATA0, val) -#define bfin_read_CAN_MB11_DATA1() bfin_read16(CAN_MB11_DATA1) -#define bfin_write_CAN_MB11_DATA1(val) bfin_write16(CAN_MB11_DATA1, val) -#define bfin_read_CAN_MB11_DATA2() bfin_read16(CAN_MB11_DATA2) -#define bfin_write_CAN_MB11_DATA2(val) bfin_write16(CAN_MB11_DATA2, val) -#define bfin_read_CAN_MB11_DATA3() bfin_read16(CAN_MB11_DATA3) -#define bfin_write_CAN_MB11_DATA3(val) bfin_write16(CAN_MB11_DATA3, val) -#define bfin_read_CAN_MB11_LENGTH() bfin_read16(CAN_MB11_LENGTH) -#define bfin_write_CAN_MB11_LENGTH(val) bfin_write16(CAN_MB11_LENGTH, val) -#define bfin_read_CAN_MB11_TIMESTAMP() bfin_read16(CAN_MB11_TIMESTAMP) -#define bfin_write_CAN_MB11_TIMESTAMP(val) bfin_write16(CAN_MB11_TIMESTAMP, val) -#define bfin_read_CAN_MB11_ID0() bfin_read16(CAN_MB11_ID0) -#define bfin_write_CAN_MB11_ID0(val) bfin_write16(CAN_MB11_ID0, val) -#define bfin_read_CAN_MB11_ID1() bfin_read16(CAN_MB11_ID1) -#define bfin_write_CAN_MB11_ID1(val) bfin_write16(CAN_MB11_ID1, val) -#define bfin_read_CAN_MB12_DATA0() bfin_read16(CAN_MB12_DATA0) -#define bfin_write_CAN_MB12_DATA0(val) bfin_write16(CAN_MB12_DATA0, val) -#define bfin_read_CAN_MB12_DATA1() bfin_read16(CAN_MB12_DATA1) -#define bfin_write_CAN_MB12_DATA1(val) bfin_write16(CAN_MB12_DATA1, val) -#define bfin_read_CAN_MB12_DATA2() bfin_read16(CAN_MB12_DATA2) -#define bfin_write_CAN_MB12_DATA2(val) bfin_write16(CAN_MB12_DATA2, val) -#define bfin_read_CAN_MB12_DATA3() bfin_read16(CAN_MB12_DATA3) -#define bfin_write_CAN_MB12_DATA3(val) bfin_write16(CAN_MB12_DATA3, val) -#define bfin_read_CAN_MB12_LENGTH() bfin_read16(CAN_MB12_LENGTH) -#define bfin_write_CAN_MB12_LENGTH(val) bfin_write16(CAN_MB12_LENGTH, val) -#define bfin_read_CAN_MB12_TIMESTAMP() bfin_read16(CAN_MB12_TIMESTAMP) -#define bfin_write_CAN_MB12_TIMESTAMP(val) bfin_write16(CAN_MB12_TIMESTAMP, val) -#define bfin_read_CAN_MB12_ID0() bfin_read16(CAN_MB12_ID0) -#define bfin_write_CAN_MB12_ID0(val) bfin_write16(CAN_MB12_ID0, val) -#define bfin_read_CAN_MB12_ID1() bfin_read16(CAN_MB12_ID1) -#define bfin_write_CAN_MB12_ID1(val) bfin_write16(CAN_MB12_ID1, val) -#define bfin_read_CAN_MB13_DATA0() bfin_read16(CAN_MB13_DATA0) -#define bfin_write_CAN_MB13_DATA0(val) bfin_write16(CAN_MB13_DATA0, val) -#define bfin_read_CAN_MB13_DATA1() bfin_read16(CAN_MB13_DATA1) -#define bfin_write_CAN_MB13_DATA1(val) bfin_write16(CAN_MB13_DATA1, val) -#define bfin_read_CAN_MB13_DATA2() bfin_read16(CAN_MB13_DATA2) -#define bfin_write_CAN_MB13_DATA2(val) bfin_write16(CAN_MB13_DATA2, val) -#define bfin_read_CAN_MB13_DATA3() bfin_read16(CAN_MB13_DATA3) -#define bfin_write_CAN_MB13_DATA3(val) bfin_write16(CAN_MB13_DATA3, val) -#define bfin_read_CAN_MB13_LENGTH() bfin_read16(CAN_MB13_LENGTH) -#define bfin_write_CAN_MB13_LENGTH(val) bfin_write16(CAN_MB13_LENGTH, val) -#define bfin_read_CAN_MB13_TIMESTAMP() bfin_read16(CAN_MB13_TIMESTAMP) -#define bfin_write_CAN_MB13_TIMESTAMP(val) bfin_write16(CAN_MB13_TIMESTAMP, val) -#define bfin_read_CAN_MB13_ID0() bfin_read16(CAN_MB13_ID0) -#define bfin_write_CAN_MB13_ID0(val) bfin_write16(CAN_MB13_ID0, val) -#define bfin_read_CAN_MB13_ID1() bfin_read16(CAN_MB13_ID1) -#define bfin_write_CAN_MB13_ID1(val) bfin_write16(CAN_MB13_ID1, val) -#define bfin_read_CAN_MB14_DATA0() bfin_read16(CAN_MB14_DATA0) -#define bfin_write_CAN_MB14_DATA0(val) bfin_write16(CAN_MB14_DATA0, val) -#define bfin_read_CAN_MB14_DATA1() bfin_read16(CAN_MB14_DATA1) -#define bfin_write_CAN_MB14_DATA1(val) bfin_write16(CAN_MB14_DATA1, val) -#define bfin_read_CAN_MB14_DATA2() bfin_read16(CAN_MB14_DATA2) -#define bfin_write_CAN_MB14_DATA2(val) bfin_write16(CAN_MB14_DATA2, val) -#define bfin_read_CAN_MB14_DATA3() bfin_read16(CAN_MB14_DATA3) -#define bfin_write_CAN_MB14_DATA3(val) bfin_write16(CAN_MB14_DATA3, val) -#define bfin_read_CAN_MB14_LENGTH() bfin_read16(CAN_MB14_LENGTH) -#define bfin_write_CAN_MB14_LENGTH(val) bfin_write16(CAN_MB14_LENGTH, val) -#define bfin_read_CAN_MB14_TIMESTAMP() bfin_read16(CAN_MB14_TIMESTAMP) -#define bfin_write_CAN_MB14_TIMESTAMP(val) bfin_write16(CAN_MB14_TIMESTAMP, val) -#define bfin_read_CAN_MB14_ID0() bfin_read16(CAN_MB14_ID0) -#define bfin_write_CAN_MB14_ID0(val) bfin_write16(CAN_MB14_ID0, val) -#define bfin_read_CAN_MB14_ID1() bfin_read16(CAN_MB14_ID1) -#define bfin_write_CAN_MB14_ID1(val) bfin_write16(CAN_MB14_ID1, val) -#define bfin_read_CAN_MB15_DATA0() bfin_read16(CAN_MB15_DATA0) -#define bfin_write_CAN_MB15_DATA0(val) bfin_write16(CAN_MB15_DATA0, val) -#define bfin_read_CAN_MB15_DATA1() bfin_read16(CAN_MB15_DATA1) -#define bfin_write_CAN_MB15_DATA1(val) bfin_write16(CAN_MB15_DATA1, val) -#define bfin_read_CAN_MB15_DATA2() bfin_read16(CAN_MB15_DATA2) -#define bfin_write_CAN_MB15_DATA2(val) bfin_write16(CAN_MB15_DATA2, val) -#define bfin_read_CAN_MB15_DATA3() bfin_read16(CAN_MB15_DATA3) -#define bfin_write_CAN_MB15_DATA3(val) bfin_write16(CAN_MB15_DATA3, val) -#define bfin_read_CAN_MB15_LENGTH() bfin_read16(CAN_MB15_LENGTH) -#define bfin_write_CAN_MB15_LENGTH(val) bfin_write16(CAN_MB15_LENGTH, val) -#define bfin_read_CAN_MB15_TIMESTAMP() bfin_read16(CAN_MB15_TIMESTAMP) -#define bfin_write_CAN_MB15_TIMESTAMP(val) bfin_write16(CAN_MB15_TIMESTAMP, val) -#define bfin_read_CAN_MB15_ID0() bfin_read16(CAN_MB15_ID0) -#define bfin_write_CAN_MB15_ID0(val) bfin_write16(CAN_MB15_ID0, val) -#define bfin_read_CAN_MB15_ID1() bfin_read16(CAN_MB15_ID1) -#define bfin_write_CAN_MB15_ID1(val) bfin_write16(CAN_MB15_ID1, val) -#define bfin_read_CAN_MB16_DATA0() bfin_read16(CAN_MB16_DATA0) -#define bfin_write_CAN_MB16_DATA0(val) bfin_write16(CAN_MB16_DATA0, val) -#define bfin_read_CAN_MB16_DATA1() bfin_read16(CAN_MB16_DATA1) -#define bfin_write_CAN_MB16_DATA1(val) bfin_write16(CAN_MB16_DATA1, val) -#define bfin_read_CAN_MB16_DATA2() bfin_read16(CAN_MB16_DATA2) -#define bfin_write_CAN_MB16_DATA2(val) bfin_write16(CAN_MB16_DATA2, val) -#define bfin_read_CAN_MB16_DATA3() bfin_read16(CAN_MB16_DATA3) -#define bfin_write_CAN_MB16_DATA3(val) bfin_write16(CAN_MB16_DATA3, val) -#define bfin_read_CAN_MB16_LENGTH() bfin_read16(CAN_MB16_LENGTH) -#define bfin_write_CAN_MB16_LENGTH(val) bfin_write16(CAN_MB16_LENGTH, val) -#define bfin_read_CAN_MB16_TIMESTAMP() bfin_read16(CAN_MB16_TIMESTAMP) -#define bfin_write_CAN_MB16_TIMESTAMP(val) bfin_write16(CAN_MB16_TIMESTAMP, val) -#define bfin_read_CAN_MB16_ID0() bfin_read16(CAN_MB16_ID0) -#define bfin_write_CAN_MB16_ID0(val) bfin_write16(CAN_MB16_ID0, val) -#define bfin_read_CAN_MB16_ID1() bfin_read16(CAN_MB16_ID1) -#define bfin_write_CAN_MB16_ID1(val) bfin_write16(CAN_MB16_ID1, val) -#define bfin_read_CAN_MB17_DATA0() bfin_read16(CAN_MB17_DATA0) -#define bfin_write_CAN_MB17_DATA0(val) bfin_write16(CAN_MB17_DATA0, val) -#define bfin_read_CAN_MB17_DATA1() bfin_read16(CAN_MB17_DATA1) -#define bfin_write_CAN_MB17_DATA1(val) bfin_write16(CAN_MB17_DATA1, val) -#define bfin_read_CAN_MB17_DATA2() bfin_read16(CAN_MB17_DATA2) -#define bfin_write_CAN_MB17_DATA2(val) bfin_write16(CAN_MB17_DATA2, val) -#define bfin_read_CAN_MB17_DATA3() bfin_read16(CAN_MB17_DATA3) -#define bfin_write_CAN_MB17_DATA3(val) bfin_write16(CAN_MB17_DATA3, val) -#define bfin_read_CAN_MB17_LENGTH() bfin_read16(CAN_MB17_LENGTH) -#define bfin_write_CAN_MB17_LENGTH(val) bfin_write16(CAN_MB17_LENGTH, val) -#define bfin_read_CAN_MB17_TIMESTAMP() bfin_read16(CAN_MB17_TIMESTAMP) -#define bfin_write_CAN_MB17_TIMESTAMP(val) bfin_write16(CAN_MB17_TIMESTAMP, val) -#define bfin_read_CAN_MB17_ID0() bfin_read16(CAN_MB17_ID0) -#define bfin_write_CAN_MB17_ID0(val) bfin_write16(CAN_MB17_ID0, val) -#define bfin_read_CAN_MB17_ID1() bfin_read16(CAN_MB17_ID1) -#define bfin_write_CAN_MB17_ID1(val) bfin_write16(CAN_MB17_ID1, val) -#define bfin_read_CAN_MB18_DATA0() bfin_read16(CAN_MB18_DATA0) -#define bfin_write_CAN_MB18_DATA0(val) bfin_write16(CAN_MB18_DATA0, val) -#define bfin_read_CAN_MB18_DATA1() bfin_read16(CAN_MB18_DATA1) -#define bfin_write_CAN_MB18_DATA1(val) bfin_write16(CAN_MB18_DATA1, val) -#define bfin_read_CAN_MB18_DATA2() bfin_read16(CAN_MB18_DATA2) -#define bfin_write_CAN_MB18_DATA2(val) bfin_write16(CAN_MB18_DATA2, val) -#define bfin_read_CAN_MB18_DATA3() bfin_read16(CAN_MB18_DATA3) -#define bfin_write_CAN_MB18_DATA3(val) bfin_write16(CAN_MB18_DATA3, val) -#define bfin_read_CAN_MB18_LENGTH() bfin_read16(CAN_MB18_LENGTH) -#define bfin_write_CAN_MB18_LENGTH(val) bfin_write16(CAN_MB18_LENGTH, val) -#define bfin_read_CAN_MB18_TIMESTAMP() bfin_read16(CAN_MB18_TIMESTAMP) -#define bfin_write_CAN_MB18_TIMESTAMP(val) bfin_write16(CAN_MB18_TIMESTAMP, val) -#define bfin_read_CAN_MB18_ID0() bfin_read16(CAN_MB18_ID0) -#define bfin_write_CAN_MB18_ID0(val) bfin_write16(CAN_MB18_ID0, val) -#define bfin_read_CAN_MB18_ID1() bfin_read16(CAN_MB18_ID1) -#define bfin_write_CAN_MB18_ID1(val) bfin_write16(CAN_MB18_ID1, val) -#define bfin_read_CAN_MB19_DATA0() bfin_read16(CAN_MB19_DATA0) -#define bfin_write_CAN_MB19_DATA0(val) bfin_write16(CAN_MB19_DATA0, val) -#define bfin_read_CAN_MB19_DATA1() bfin_read16(CAN_MB19_DATA1) -#define bfin_write_CAN_MB19_DATA1(val) bfin_write16(CAN_MB19_DATA1, val) -#define bfin_read_CAN_MB19_DATA2() bfin_read16(CAN_MB19_DATA2) -#define bfin_write_CAN_MB19_DATA2(val) bfin_write16(CAN_MB19_DATA2, val) -#define bfin_read_CAN_MB19_DATA3() bfin_read16(CAN_MB19_DATA3) -#define bfin_write_CAN_MB19_DATA3(val) bfin_write16(CAN_MB19_DATA3, val) -#define bfin_read_CAN_MB19_LENGTH() bfin_read16(CAN_MB19_LENGTH) -#define bfin_write_CAN_MB19_LENGTH(val) bfin_write16(CAN_MB19_LENGTH, val) -#define bfin_read_CAN_MB19_TIMESTAMP() bfin_read16(CAN_MB19_TIMESTAMP) -#define bfin_write_CAN_MB19_TIMESTAMP(val) bfin_write16(CAN_MB19_TIMESTAMP, val) -#define bfin_read_CAN_MB19_ID0() bfin_read16(CAN_MB19_ID0) -#define bfin_write_CAN_MB19_ID0(val) bfin_write16(CAN_MB19_ID0, val) -#define bfin_read_CAN_MB19_ID1() bfin_read16(CAN_MB19_ID1) -#define bfin_write_CAN_MB19_ID1(val) bfin_write16(CAN_MB19_ID1, val) -#define bfin_read_CAN_MB20_DATA0() bfin_read16(CAN_MB20_DATA0) -#define bfin_write_CAN_MB20_DATA0(val) bfin_write16(CAN_MB20_DATA0, val) -#define bfin_read_CAN_MB20_DATA1() bfin_read16(CAN_MB20_DATA1) -#define bfin_write_CAN_MB20_DATA1(val) bfin_write16(CAN_MB20_DATA1, val) -#define bfin_read_CAN_MB20_DATA2() bfin_read16(CAN_MB20_DATA2) -#define bfin_write_CAN_MB20_DATA2(val) bfin_write16(CAN_MB20_DATA2, val) -#define bfin_read_CAN_MB20_DATA3() bfin_read16(CAN_MB20_DATA3) -#define bfin_write_CAN_MB20_DATA3(val) bfin_write16(CAN_MB20_DATA3, val) -#define bfin_read_CAN_MB20_LENGTH() bfin_read16(CAN_MB20_LENGTH) -#define bfin_write_CAN_MB20_LENGTH(val) bfin_write16(CAN_MB20_LENGTH, val) -#define bfin_read_CAN_MB20_TIMESTAMP() bfin_read16(CAN_MB20_TIMESTAMP) -#define bfin_write_CAN_MB20_TIMESTAMP(val) bfin_write16(CAN_MB20_TIMESTAMP, val) -#define bfin_read_CAN_MB20_ID0() bfin_read16(CAN_MB20_ID0) -#define bfin_write_CAN_MB20_ID0(val) bfin_write16(CAN_MB20_ID0, val) -#define bfin_read_CAN_MB20_ID1() bfin_read16(CAN_MB20_ID1) -#define bfin_write_CAN_MB20_ID1(val) bfin_write16(CAN_MB20_ID1, val) -#define bfin_read_CAN_MB21_DATA0() bfin_read16(CAN_MB21_DATA0) -#define bfin_write_CAN_MB21_DATA0(val) bfin_write16(CAN_MB21_DATA0, val) -#define bfin_read_CAN_MB21_DATA1() bfin_read16(CAN_MB21_DATA1) -#define bfin_write_CAN_MB21_DATA1(val) bfin_write16(CAN_MB21_DATA1, val) -#define bfin_read_CAN_MB21_DATA2() bfin_read16(CAN_MB21_DATA2) -#define bfin_write_CAN_MB21_DATA2(val) bfin_write16(CAN_MB21_DATA2, val) -#define bfin_read_CAN_MB21_DATA3() bfin_read16(CAN_MB21_DATA3) -#define bfin_write_CAN_MB21_DATA3(val) bfin_write16(CAN_MB21_DATA3, val) -#define bfin_read_CAN_MB21_LENGTH() bfin_read16(CAN_MB21_LENGTH) -#define bfin_write_CAN_MB21_LENGTH(val) bfin_write16(CAN_MB21_LENGTH, val) -#define bfin_read_CAN_MB21_TIMESTAMP() bfin_read16(CAN_MB21_TIMESTAMP) -#define bfin_write_CAN_MB21_TIMESTAMP(val) bfin_write16(CAN_MB21_TIMESTAMP, val) -#define bfin_read_CAN_MB21_ID0() bfin_read16(CAN_MB21_ID0) -#define bfin_write_CAN_MB21_ID0(val) bfin_write16(CAN_MB21_ID0, val) -#define bfin_read_CAN_MB21_ID1() bfin_read16(CAN_MB21_ID1) -#define bfin_write_CAN_MB21_ID1(val) bfin_write16(CAN_MB21_ID1, val) -#define bfin_read_CAN_MB22_DATA0() bfin_read16(CAN_MB22_DATA0) -#define bfin_write_CAN_MB22_DATA0(val) bfin_write16(CAN_MB22_DATA0, val) -#define bfin_read_CAN_MB22_DATA1() bfin_read16(CAN_MB22_DATA1) -#define bfin_write_CAN_MB22_DATA1(val) bfin_write16(CAN_MB22_DATA1, val) -#define bfin_read_CAN_MB22_DATA2() bfin_read16(CAN_MB22_DATA2) -#define bfin_write_CAN_MB22_DATA2(val) bfin_write16(CAN_MB22_DATA2, val) -#define bfin_read_CAN_MB22_DATA3() bfin_read16(CAN_MB22_DATA3) -#define bfin_write_CAN_MB22_DATA3(val) bfin_write16(CAN_MB22_DATA3, val) -#define bfin_read_CAN_MB22_LENGTH() bfin_read16(CAN_MB22_LENGTH) -#define bfin_write_CAN_MB22_LENGTH(val) bfin_write16(CAN_MB22_LENGTH, val) -#define bfin_read_CAN_MB22_TIMESTAMP() bfin_read16(CAN_MB22_TIMESTAMP) -#define bfin_write_CAN_MB22_TIMESTAMP(val) bfin_write16(CAN_MB22_TIMESTAMP, val) -#define bfin_read_CAN_MB22_ID0() bfin_read16(CAN_MB22_ID0) -#define bfin_write_CAN_MB22_ID0(val) bfin_write16(CAN_MB22_ID0, val) -#define bfin_read_CAN_MB22_ID1() bfin_read16(CAN_MB22_ID1) -#define bfin_write_CAN_MB22_ID1(val) bfin_write16(CAN_MB22_ID1, val) -#define bfin_read_CAN_MB23_DATA0() bfin_read16(CAN_MB23_DATA0) -#define bfin_write_CAN_MB23_DATA0(val) bfin_write16(CAN_MB23_DATA0, val) -#define bfin_read_CAN_MB23_DATA1() bfin_read16(CAN_MB23_DATA1) -#define bfin_write_CAN_MB23_DATA1(val) bfin_write16(CAN_MB23_DATA1, val) -#define bfin_read_CAN_MB23_DATA2() bfin_read16(CAN_MB23_DATA2) -#define bfin_write_CAN_MB23_DATA2(val) bfin_write16(CAN_MB23_DATA2, val) -#define bfin_read_CAN_MB23_DATA3() bfin_read16(CAN_MB23_DATA3) -#define bfin_write_CAN_MB23_DATA3(val) bfin_write16(CAN_MB23_DATA3, val) -#define bfin_read_CAN_MB23_LENGTH() bfin_read16(CAN_MB23_LENGTH) -#define bfin_write_CAN_MB23_LENGTH(val) bfin_write16(CAN_MB23_LENGTH, val) -#define bfin_read_CAN_MB23_TIMESTAMP() bfin_read16(CAN_MB23_TIMESTAMP) -#define bfin_write_CAN_MB23_TIMESTAMP(val) bfin_write16(CAN_MB23_TIMESTAMP, val) -#define bfin_read_CAN_MB23_ID0() bfin_read16(CAN_MB23_ID0) -#define bfin_write_CAN_MB23_ID0(val) bfin_write16(CAN_MB23_ID0, val) -#define bfin_read_CAN_MB23_ID1() bfin_read16(CAN_MB23_ID1) -#define bfin_write_CAN_MB23_ID1(val) bfin_write16(CAN_MB23_ID1, val) -#define bfin_read_CAN_MB24_DATA0() bfin_read16(CAN_MB24_DATA0) -#define bfin_write_CAN_MB24_DATA0(val) bfin_write16(CAN_MB24_DATA0, val) -#define bfin_read_CAN_MB24_DATA1() bfin_read16(CAN_MB24_DATA1) -#define bfin_write_CAN_MB24_DATA1(val) bfin_write16(CAN_MB24_DATA1, val) -#define bfin_read_CAN_MB24_DATA2() bfin_read16(CAN_MB24_DATA2) -#define bfin_write_CAN_MB24_DATA2(val) bfin_write16(CAN_MB24_DATA2, val) -#define bfin_read_CAN_MB24_DATA3() bfin_read16(CAN_MB24_DATA3) -#define bfin_write_CAN_MB24_DATA3(val) bfin_write16(CAN_MB24_DATA3, val) -#define bfin_read_CAN_MB24_LENGTH() bfin_read16(CAN_MB24_LENGTH) -#define bfin_write_CAN_MB24_LENGTH(val) bfin_write16(CAN_MB24_LENGTH, val) -#define bfin_read_CAN_MB24_TIMESTAMP() bfin_read16(CAN_MB24_TIMESTAMP) -#define bfin_write_CAN_MB24_TIMESTAMP(val) bfin_write16(CAN_MB24_TIMESTAMP, val) -#define bfin_read_CAN_MB24_ID0() bfin_read16(CAN_MB24_ID0) -#define bfin_write_CAN_MB24_ID0(val) bfin_write16(CAN_MB24_ID0, val) -#define bfin_read_CAN_MB24_ID1() bfin_read16(CAN_MB24_ID1) -#define bfin_write_CAN_MB24_ID1(val) bfin_write16(CAN_MB24_ID1, val) -#define bfin_read_CAN_MB25_DATA0() bfin_read16(CAN_MB25_DATA0) -#define bfin_write_CAN_MB25_DATA0(val) bfin_write16(CAN_MB25_DATA0, val) -#define bfin_read_CAN_MB25_DATA1() bfin_read16(CAN_MB25_DATA1) -#define bfin_write_CAN_MB25_DATA1(val) bfin_write16(CAN_MB25_DATA1, val) -#define bfin_read_CAN_MB25_DATA2() bfin_read16(CAN_MB25_DATA2) -#define bfin_write_CAN_MB25_DATA2(val) bfin_write16(CAN_MB25_DATA2, val) -#define bfin_read_CAN_MB25_DATA3() bfin_read16(CAN_MB25_DATA3) -#define bfin_write_CAN_MB25_DATA3(val) bfin_write16(CAN_MB25_DATA3, val) -#define bfin_read_CAN_MB25_LENGTH() bfin_read16(CAN_MB25_LENGTH) -#define bfin_write_CAN_MB25_LENGTH(val) bfin_write16(CAN_MB25_LENGTH, val) -#define bfin_read_CAN_MB25_TIMESTAMP() bfin_read16(CAN_MB25_TIMESTAMP) -#define bfin_write_CAN_MB25_TIMESTAMP(val) bfin_write16(CAN_MB25_TIMESTAMP, val) -#define bfin_read_CAN_MB25_ID0() bfin_read16(CAN_MB25_ID0) -#define bfin_write_CAN_MB25_ID0(val) bfin_write16(CAN_MB25_ID0, val) -#define bfin_read_CAN_MB25_ID1() bfin_read16(CAN_MB25_ID1) -#define bfin_write_CAN_MB25_ID1(val) bfin_write16(CAN_MB25_ID1, val) -#define bfin_read_CAN_MB26_DATA0() bfin_read16(CAN_MB26_DATA0) -#define bfin_write_CAN_MB26_DATA0(val) bfin_write16(CAN_MB26_DATA0, val) -#define bfin_read_CAN_MB26_DATA1() bfin_read16(CAN_MB26_DATA1) -#define bfin_write_CAN_MB26_DATA1(val) bfin_write16(CAN_MB26_DATA1, val) -#define bfin_read_CAN_MB26_DATA2() bfin_read16(CAN_MB26_DATA2) -#define bfin_write_CAN_MB26_DATA2(val) bfin_write16(CAN_MB26_DATA2, val) -#define bfin_read_CAN_MB26_DATA3() bfin_read16(CAN_MB26_DATA3) -#define bfin_write_CAN_MB26_DATA3(val) bfin_write16(CAN_MB26_DATA3, val) -#define bfin_read_CAN_MB26_LENGTH() bfin_read16(CAN_MB26_LENGTH) -#define bfin_write_CAN_MB26_LENGTH(val) bfin_write16(CAN_MB26_LENGTH, val) -#define bfin_read_CAN_MB26_TIMESTAMP() bfin_read16(CAN_MB26_TIMESTAMP) -#define bfin_write_CAN_MB26_TIMESTAMP(val) bfin_write16(CAN_MB26_TIMESTAMP, val) -#define bfin_read_CAN_MB26_ID0() bfin_read16(CAN_MB26_ID0) -#define bfin_write_CAN_MB26_ID0(val) bfin_write16(CAN_MB26_ID0, val) -#define bfin_read_CAN_MB26_ID1() bfin_read16(CAN_MB26_ID1) -#define bfin_write_CAN_MB26_ID1(val) bfin_write16(CAN_MB26_ID1, val) -#define bfin_read_CAN_MB27_DATA0() bfin_read16(CAN_MB27_DATA0) -#define bfin_write_CAN_MB27_DATA0(val) bfin_write16(CAN_MB27_DATA0, val) -#define bfin_read_CAN_MB27_DATA1() bfin_read16(CAN_MB27_DATA1) -#define bfin_write_CAN_MB27_DATA1(val) bfin_write16(CAN_MB27_DATA1, val) -#define bfin_read_CAN_MB27_DATA2() bfin_read16(CAN_MB27_DATA2) -#define bfin_write_CAN_MB27_DATA2(val) bfin_write16(CAN_MB27_DATA2, val) -#define bfin_read_CAN_MB27_DATA3() bfin_read16(CAN_MB27_DATA3) -#define bfin_write_CAN_MB27_DATA3(val) bfin_write16(CAN_MB27_DATA3, val) -#define bfin_read_CAN_MB27_LENGTH() bfin_read16(CAN_MB27_LENGTH) -#define bfin_write_CAN_MB27_LENGTH(val) bfin_write16(CAN_MB27_LENGTH, val) -#define bfin_read_CAN_MB27_TIMESTAMP() bfin_read16(CAN_MB27_TIMESTAMP) -#define bfin_write_CAN_MB27_TIMESTAMP(val) bfin_write16(CAN_MB27_TIMESTAMP, val) -#define bfin_read_CAN_MB27_ID0() bfin_read16(CAN_MB27_ID0) -#define bfin_write_CAN_MB27_ID0(val) bfin_write16(CAN_MB27_ID0, val) -#define bfin_read_CAN_MB27_ID1() bfin_read16(CAN_MB27_ID1) -#define bfin_write_CAN_MB27_ID1(val) bfin_write16(CAN_MB27_ID1, val) -#define bfin_read_CAN_MB28_DATA0() bfin_read16(CAN_MB28_DATA0) -#define bfin_write_CAN_MB28_DATA0(val) bfin_write16(CAN_MB28_DATA0, val) -#define bfin_read_CAN_MB28_DATA1() bfin_read16(CAN_MB28_DATA1) -#define bfin_write_CAN_MB28_DATA1(val) bfin_write16(CAN_MB28_DATA1, val) -#define bfin_read_CAN_MB28_DATA2() bfin_read16(CAN_MB28_DATA2) -#define bfin_write_CAN_MB28_DATA2(val) bfin_write16(CAN_MB28_DATA2, val) -#define bfin_read_CAN_MB28_DATA3() bfin_read16(CAN_MB28_DATA3) -#define bfin_write_CAN_MB28_DATA3(val) bfin_write16(CAN_MB28_DATA3, val) -#define bfin_read_CAN_MB28_LENGTH() bfin_read16(CAN_MB28_LENGTH) -#define bfin_write_CAN_MB28_LENGTH(val) bfin_write16(CAN_MB28_LENGTH, val) -#define bfin_read_CAN_MB28_TIMESTAMP() bfin_read16(CAN_MB28_TIMESTAMP) -#define bfin_write_CAN_MB28_TIMESTAMP(val) bfin_write16(CAN_MB28_TIMESTAMP, val) -#define bfin_read_CAN_MB28_ID0() bfin_read16(CAN_MB28_ID0) -#define bfin_write_CAN_MB28_ID0(val) bfin_write16(CAN_MB28_ID0, val) -#define bfin_read_CAN_MB28_ID1() bfin_read16(CAN_MB28_ID1) -#define bfin_write_CAN_MB28_ID1(val) bfin_write16(CAN_MB28_ID1, val) -#define bfin_read_CAN_MB29_DATA0() bfin_read16(CAN_MB29_DATA0) -#define bfin_write_CAN_MB29_DATA0(val) bfin_write16(CAN_MB29_DATA0, val) -#define bfin_read_CAN_MB29_DATA1() bfin_read16(CAN_MB29_DATA1) -#define bfin_write_CAN_MB29_DATA1(val) bfin_write16(CAN_MB29_DATA1, val) -#define bfin_read_CAN_MB29_DATA2() bfin_read16(CAN_MB29_DATA2) -#define bfin_write_CAN_MB29_DATA2(val) bfin_write16(CAN_MB29_DATA2, val) -#define bfin_read_CAN_MB29_DATA3() bfin_read16(CAN_MB29_DATA3) -#define bfin_write_CAN_MB29_DATA3(val) bfin_write16(CAN_MB29_DATA3, val) -#define bfin_read_CAN_MB29_LENGTH() bfin_read16(CAN_MB29_LENGTH) -#define bfin_write_CAN_MB29_LENGTH(val) bfin_write16(CAN_MB29_LENGTH, val) -#define bfin_read_CAN_MB29_TIMESTAMP() bfin_read16(CAN_MB29_TIMESTAMP) -#define bfin_write_CAN_MB29_TIMESTAMP(val) bfin_write16(CAN_MB29_TIMESTAMP, val) -#define bfin_read_CAN_MB29_ID0() bfin_read16(CAN_MB29_ID0) -#define bfin_write_CAN_MB29_ID0(val) bfin_write16(CAN_MB29_ID0, val) -#define bfin_read_CAN_MB29_ID1() bfin_read16(CAN_MB29_ID1) -#define bfin_write_CAN_MB29_ID1(val) bfin_write16(CAN_MB29_ID1, val) -#define bfin_read_CAN_MB30_DATA0() bfin_read16(CAN_MB30_DATA0) -#define bfin_write_CAN_MB30_DATA0(val) bfin_write16(CAN_MB30_DATA0, val) -#define bfin_read_CAN_MB30_DATA1() bfin_read16(CAN_MB30_DATA1) -#define bfin_write_CAN_MB30_DATA1(val) bfin_write16(CAN_MB30_DATA1, val) -#define bfin_read_CAN_MB30_DATA2() bfin_read16(CAN_MB30_DATA2) -#define bfin_write_CAN_MB30_DATA2(val) bfin_write16(CAN_MB30_DATA2, val) -#define bfin_read_CAN_MB30_DATA3() bfin_read16(CAN_MB30_DATA3) -#define bfin_write_CAN_MB30_DATA3(val) bfin_write16(CAN_MB30_DATA3, val) -#define bfin_read_CAN_MB30_LENGTH() bfin_read16(CAN_MB30_LENGTH) -#define bfin_write_CAN_MB30_LENGTH(val) bfin_write16(CAN_MB30_LENGTH, val) -#define bfin_read_CAN_MB30_TIMESTAMP() bfin_read16(CAN_MB30_TIMESTAMP) -#define bfin_write_CAN_MB30_TIMESTAMP(val) bfin_write16(CAN_MB30_TIMESTAMP, val) -#define bfin_read_CAN_MB30_ID0() bfin_read16(CAN_MB30_ID0) -#define bfin_write_CAN_MB30_ID0(val) bfin_write16(CAN_MB30_ID0, val) -#define bfin_read_CAN_MB30_ID1() bfin_read16(CAN_MB30_ID1) -#define bfin_write_CAN_MB30_ID1(val) bfin_write16(CAN_MB30_ID1, val) -#define bfin_read_CAN_MB31_DATA0() bfin_read16(CAN_MB31_DATA0) -#define bfin_write_CAN_MB31_DATA0(val) bfin_write16(CAN_MB31_DATA0, val) -#define bfin_read_CAN_MB31_DATA1() bfin_read16(CAN_MB31_DATA1) -#define bfin_write_CAN_MB31_DATA1(val) bfin_write16(CAN_MB31_DATA1, val) -#define bfin_read_CAN_MB31_DATA2() bfin_read16(CAN_MB31_DATA2) -#define bfin_write_CAN_MB31_DATA2(val) bfin_write16(CAN_MB31_DATA2, val) -#define bfin_read_CAN_MB31_DATA3() bfin_read16(CAN_MB31_DATA3) -#define bfin_write_CAN_MB31_DATA3(val) bfin_write16(CAN_MB31_DATA3, val) -#define bfin_read_CAN_MB31_LENGTH() bfin_read16(CAN_MB31_LENGTH) -#define bfin_write_CAN_MB31_LENGTH(val) bfin_write16(CAN_MB31_LENGTH, val) -#define bfin_read_CAN_MB31_TIMESTAMP() bfin_read16(CAN_MB31_TIMESTAMP) -#define bfin_write_CAN_MB31_TIMESTAMP(val) bfin_write16(CAN_MB31_TIMESTAMP, val) -#define bfin_read_CAN_MB31_ID0() bfin_read16(CAN_MB31_ID0) -#define bfin_write_CAN_MB31_ID0(val) bfin_write16(CAN_MB31_ID0, val) -#define bfin_read_CAN_MB31_ID1() bfin_read16(CAN_MB31_ID1) -#define bfin_write_CAN_MB31_ID1(val) bfin_write16(CAN_MB31_ID1, val) -#define bfin_read_PORTF_FER() bfin_read16(PORTF_FER) -#define bfin_write_PORTF_FER(val) bfin_write16(PORTF_FER, val) -#define bfin_read_PORTG_FER() bfin_read16(PORTG_FER) -#define bfin_write_PORTG_FER(val) bfin_write16(PORTG_FER, val) -#define bfin_read_PORTH_FER() bfin_read16(PORTH_FER) -#define bfin_write_PORTH_FER(val) bfin_write16(PORTH_FER, val) -#define bfin_read_PORT_MUX() bfin_read16(PORT_MUX) -#define bfin_write_PORT_MUX(val) bfin_write16(PORT_MUX, val) -#define bfin_read_HMDMA0_CONTROL() bfin_read16(HMDMA0_CONTROL) -#define bfin_write_HMDMA0_CONTROL(val) bfin_write16(HMDMA0_CONTROL, val) -#define bfin_read_HMDMA0_ECINIT() bfin_read16(HMDMA0_ECINIT) -#define bfin_write_HMDMA0_ECINIT(val) bfin_write16(HMDMA0_ECINIT, val) -#define bfin_read_HMDMA0_BCINIT() bfin_read16(HMDMA0_BCINIT) -#define bfin_write_HMDMA0_BCINIT(val) bfin_write16(HMDMA0_BCINIT, val) -#define bfin_read_HMDMA0_ECURGENT() bfin_read16(HMDMA0_ECURGENT) -#define bfin_write_HMDMA0_ECURGENT(val) bfin_write16(HMDMA0_ECURGENT, val) -#define bfin_read_HMDMA0_ECOVERFLOW() bfin_read16(HMDMA0_ECOVERFLOW) -#define bfin_write_HMDMA0_ECOVERFLOW(val) bfin_write16(HMDMA0_ECOVERFLOW, val) -#define bfin_read_HMDMA0_ECOUNT() bfin_read16(HMDMA0_ECOUNT) -#define bfin_write_HMDMA0_ECOUNT(val) bfin_write16(HMDMA0_ECOUNT, val) -#define bfin_read_HMDMA0_BCOUNT() bfin_read16(HMDMA0_BCOUNT) -#define bfin_write_HMDMA0_BCOUNT(val) bfin_write16(HMDMA0_BCOUNT, val) -#define bfin_read_HMDMA1_CONTROL() bfin_read16(HMDMA1_CONTROL) -#define bfin_write_HMDMA1_CONTROL(val) bfin_write16(HMDMA1_CONTROL, val) -#define bfin_read_HMDMA1_ECINIT() bfin_read16(HMDMA1_ECINIT) -#define bfin_write_HMDMA1_ECINIT(val) bfin_write16(HMDMA1_ECINIT, val) -#define bfin_read_HMDMA1_BCINIT() bfin_read16(HMDMA1_BCINIT) -#define bfin_write_HMDMA1_BCINIT(val) bfin_write16(HMDMA1_BCINIT, val) -#define bfin_read_HMDMA1_ECURGENT() bfin_read16(HMDMA1_ECURGENT) -#define bfin_write_HMDMA1_ECURGENT(val) bfin_write16(HMDMA1_ECURGENT, val) -#define bfin_read_HMDMA1_ECOVERFLOW() bfin_read16(HMDMA1_ECOVERFLOW) -#define bfin_write_HMDMA1_ECOVERFLOW(val) bfin_write16(HMDMA1_ECOVERFLOW, val) -#define bfin_read_HMDMA1_ECOUNT() bfin_read16(HMDMA1_ECOUNT) -#define bfin_write_HMDMA1_ECOUNT(val) bfin_write16(HMDMA1_ECOUNT, val) -#define bfin_read_HMDMA1_BCOUNT() bfin_read16(HMDMA1_BCOUNT) -#define bfin_write_HMDMA1_BCOUNT(val) bfin_write16(HMDMA1_BCOUNT, val) -#define bfin_read_CHIPID() bfin_read32(CHIPID) -#define bfin_write_CHIPID(val) bfin_write32(CHIPID, val) -#define bfin_read_DMA_TC_CNT() bfin_read16(DMA_TC_CNT) -#define bfin_write_DMA_TC_CNT(val) bfin_write16(DMA_TC_CNT, val) -#define bfin_read_DMA_TC_PER() bfin_read16(DMA_TC_PER) -#define bfin_write_DMA_TC_PER(val) bfin_write16(DMA_TC_PER, val) - -#endif /* __BFIN_CDEF_ADSP_EDN_BF534_extended__ */ diff --git a/arch/blackfin/include/asm/mach-bf537/ADSP-EDN-BF534-extended_def.h b/arch/blackfin/include/asm/mach-bf537/ADSP-EDN-BF534-extended_def.h deleted file mode 100644 index 81b158e..0000000 --- a/arch/blackfin/include/asm/mach-bf537/ADSP-EDN-BF534-extended_def.h +++ /dev/null @@ -1,819 +0,0 @@ -/* DO NOT EDIT THIS FILE - * Automatically generated by generate-def-headers.xsl - * DO NOT EDIT THIS FILE - */ - -#ifndef __BFIN_DEF_ADSP_EDN_BF534_extended__ -#define __BFIN_DEF_ADSP_EDN_BF534_extended__ - -#include "../mach-common/ADSP-EDN-core_def.h" - -#define PLL_CTL 0xFFC00000 /* PLL Control Register */ -#define PLL_DIV 0xFFC00004 /* PLL Divide Register */ -#define VR_CTL 0xFFC00008 /* Voltage Regulator Control Register */ -#define PLL_STAT 0xFFC0000C /* PLL Status Register */ -#define PLL_LOCKCNT 0xFFC00010 /* PLL Lock Count Register */ -#define SWRST 0xFFC00100 /* Software Reset Register */ -#define SYSCR 0xFFC00104 /* System Configuration Register */ -#define SIC_RVECT 0xFFC00108 /* Interrupt Reset Vector Address Register */ -#define SIC_IMASK 0xFFC0010C /* Interrupt Mask Register */ -#define SIC_IAR0 0xFFC00110 /* Interrupt Assignment Register 0 */ -#define SIC_IAR1 0xFFC00114 /* Interrupt Assignment Register 1 */ -#define SIC_IAR2 0xFFC00118 /* Interrupt Assignment Register 2 */ -#define SIC_IAR3 0xFFC0011C /* Interrupt Assignment Register 3 */ -#define SIC_ISR 0xFFC00120 /* Interrupt Status Register */ -#define SIC_IWR 0xFFC00124 /* Interrupt Wakeup Register */ -#define WDOG_CTL 0xFFC00200 /* Watchdog Control Register */ -#define WDOG_CNT 0xFFC00204 /* Watchdog Count Register */ -#define WDOG_STAT 0xFFC00208 /* Watchdog Status Register */ -#define RTC_STAT 0xFFC00300 /* RTC Status Register */ -#define RTC_ICTL 0xFFC00304 /* RTC Interrupt Control Register */ -#define RTC_ISTAT 0xFFC00308 /* RTC Interrupt Status Register */ -#define RTC_SWCNT 0xFFC0030C /* RTC Stopwatch Count Register */ -#define RTC_ALARM 0xFFC00310 /* RTC Alarm Time Register */ -#define RTC_PREN 0xFFC00314 /* RTC Prescaler Enable Register */ -#define UART0_THR 0xFFC00400 /* Transmit Holding register */ -#define UART0_RBR 0xFFC00400 /* Receive Buffer register */ -#define UART0_DLL 0xFFC00400 /* Divisor Latch (Low-Byte) */ -#define UART0_IER 0xFFC00404 /* Interrupt Enable Register */ -#define UART0_DLH 0xFFC00404 /* Divisor Latch (High-Byte) */ -#define UART0_IIR 0xFFC00408 /* Interrupt Identification Register */ -#define UART0_LCR 0xFFC0040C /* Line Control Register */ -#define UART0_MCR 0xFFC00410 /* Modem Control Register */ -#define UART0_LSR 0xFFC00414 /* Line Status Register */ -#define UART0_MSR 0xFFC00418 /* Modem Status Register */ -#define UART0_SCR 0xFFC0041C /* SCR Scratch Register */ -#define UART0_GCTL 0xFFC00424 /* Global Control Register */ -#define SPI_CTL 0xFFC00500 /* SPI Control Register */ -#define SPI_FLG 0xFFC00504 /* SPI Flag register */ -#define SPI_STAT 0xFFC00508 /* SPI Status register */ -#define SPI_TDBR 0xFFC0050C /* SPI Transmit Data Buffer Register */ -#define SPI_RDBR 0xFFC00510 /* SPI Receive Data Buffer Register */ -#define SPI_BAUD 0xFFC00514 /* SPI Baud rate Register */ -#define SPI_SHADOW 0xFFC00518 /* SPI_RDBR Shadow Register */ -#define TIMER0_CONFIG 0xFFC00600 /* Timer 0 Configuration Register */ -#define TIMER0_COUNTER 0xFFC00604 /* Timer 0 Counter Register */ -#define TIMER0_PERIOD 0xFFC00608 /* Timer 0 Period Register */ -#define TIMER0_WIDTH 0xFFC0060C /* Timer 0 Width Register */ -#define TIMER1_CONFIG 0xFFC00610 /* Timer 1 Configuration Register */ -#define TIMER1_COUNTER 0xFFC00614 /* Timer 1 Counter Register */ -#define TIMER1_PERIOD 0xFFC00618 /* Timer 1 Period Register */ -#define TIMER1_WIDTH 0xFFC0061C /* Timer 1 Width Register */ -#define TIMER2_CONFIG 0xFFC00620 /* Timer 2 Configuration Register */ -#define TIMER2_COUNTER 0xFFC00624 /* Timer 2 Counter Register */ -#define TIMER2_PERIOD 0xFFC00628 /* Timer 2 Period Register */ -#define TIMER2_WIDTH 0xFFC0062C /* Timer 2 Width Register */ -#define TIMER3_CONFIG 0xFFC00630 /* Timer 3 Configuration Register */ -#define TIMER3_COUNTER 0xFFC00634 /* Timer 3 Counter Register */ -#define TIMER3_PERIOD 0xFFC00638 /* Timer 3 Period Register */ -#define TIMER3_WIDTH 0xFFC0063C /* Timer 3 Width Register */ -#define TIMER4_CONFIG 0xFFC00640 /* Timer 4 Configuration Register */ -#define TIMER4_COUNTER 0xFFC00644 /* Timer 4 Counter Register */ -#define TIMER4_PERIOD 0xFFC00648 /* Timer 4 Period Register */ -#define TIMER4_WIDTH 0xFFC0064C /* Timer 4 Width Register */ -#define TIMER5_CONFIG 0xFFC00650 /* Timer 5 Configuration Register */ -#define TIMER5_COUNTER 0xFFC00654 /* Timer 5 Counter Register */ -#define TIMER5_PERIOD 0xFFC00658 /* Timer 5 Period Register */ -#define TIMER5_WIDTH 0xFFC0065C /* Timer 5 Width Register */ -#define TIMER6_CONFIG 0xFFC00660 /* Timer 6 Configuration Register */ -#define TIMER6_COUNTER 0xFFC00664 /* Timer 6 Counter Register */ -#define TIMER6_PERIOD 0xFFC00668 /* Timer 6 Period Register */ -#define TIMER6_WIDTH 0xFFC0066C /* Timer 6 Width Register\n */ -#define TIMER7_CONFIG 0xFFC00670 /* Timer 7 Configuration Register */ -#define TIMER7_COUNTER 0xFFC00674 /* Timer 7 Counter Register */ -#define TIMER7_PERIOD 0xFFC00678 /* Timer 7 Period Register */ -#define TIMER7_WIDTH 0xFFC0067C /* Timer 7 Width Register */ -#define TIMER_ENABLE 0xFFC00680 /* Timer Enable Register */ -#define TIMER_DISABLE 0xFFC00684 /* Timer Disable Register */ -#define TIMER_STATUS 0xFFC00688 /* Timer Status Register */ -#define PORTFIO 0xFFC00700 /* Port F I/O Pin State Specify Register */ -#define PORTFIO_CLEAR 0xFFC00704 /* Port F I/O Peripheral Interrupt Clear Register */ -#define PORTFIO_SET 0xFFC00708 /* Port F I/O Peripheral Interrupt Set Register */ -#define PORTFIO_TOGGLE 0xFFC0070C /* Port F I/O Pin State Toggle Register */ -#define PORTFIO_MASKA 0xFFC00710 /* Port F I/O Mask State Specify Interrupt A Register */ -#define PORTFIO_MASKA_CLEAR 0xFFC00714 /* Port F I/O Mask Disable Interrupt A Register */ -#define PORTFIO_MASKA_SET 0xFFC00718 /* Port F I/O Mask Enable Interrupt A Register */ -#define PORTFIO_MASKA_TOGGLE 0xFFC0071C /* Port F I/O Mask Toggle Enable Interrupt A Register */ -#define PORTFIO_MASKB 0xFFC00720 /* Port F I/O Mask State Specify Interrupt B Register */ -#define PORTFIO_MASKB_CLEAR 0xFFC00724 /* Port F I/O Mask Disable Interrupt B Register */ -#define PORTFIO_MASKB_SET 0xFFC00728 /* Port F I/O Mask Enable Interrupt B Register */ -#define PORTFIO_MASKB_TOGGLE 0xFFC0072C /* Port F I/O Mask Toggle Enable Interrupt B Register */ -#define PORTFIO_DIR 0xFFC00730 /* Port F I/O Direction Register */ -#define PORTFIO_POLAR 0xFFC00734 /* Port F I/O Source Polarity Register */ -#define PORTFIO_EDGE 0xFFC00738 /* Port F I/O Source Sensitivity Register */ -#define PORTFIO_BOTH 0xFFC0073C /* Port F I/O Set on BOTH Edges Register */ -#define PORTFIO_INEN 0xFFC00740 /* Port F I/O Input Enable Register */ -#define SPORT0_TCR1 0xFFC00800 /* SPORT0 Transmit Configuration 1 Register */ -#define SPORT0_TCR2 0xFFC00804 /* SPORT0 Transmit Configuration 2 Register */ -#define SPORT0_TCLKDIV 0xFFC00808 /* SPORT0 Transmit Clock Divider */ -#define SPORT0_TFSDIV 0xFFC0080C /* SPORT0 Transmit Frame Sync Divider */ -#define SPORT0_TX 0xFFC00810 /* SPORT0 TX Data Register */ -#define SPORT0_RX 0xFFC00818 /* SPORT0 RX Data Register */ -#define SPORT0_RCR1 0xFFC00820 /* SPORT0 Transmit Configuration 1 Register */ -#define SPORT0_RCR2 0xFFC00824 /* SPORT0 Transmit Configuration 2 Register */ -#define SPORT0_RCLKDIV 0xFFC00828 /* SPORT0 Receive Clock Divider */ -#define SPORT0_RFSDIV 0xFFC0082C /* SPORT0 Receive Frame Sync Divider */ -#define SPORT0_STAT 0xFFC00830 /* SPORT0 Status Register */ -#define SPORT0_CHNL 0xFFC00834 /* SPORT0 Current Channel Register */ -#define SPORT0_MCMC1 0xFFC00838 /* SPORT0 Multi-Channel Configuration Register 1 */ -#define SPORT0_MCMC2 0xFFC0083C /* SPORT0 Multi-Channel Configuration Register 2 */ -#define SPORT0_MTCS0 0xFFC00840 /* SPORT0 Multi-Channel Transmit Select Register 0 */ -#define SPORT0_MTCS1 0xFFC00844 /* SPORT0 Multi-Channel Transmit Select Register 1 */ -#define SPORT0_MTCS2 0xFFC00848 /* SPORT0 Multi-Channel Transmit Select Register 2 */ -#define SPORT0_MTCS3 0xFFC0084C /* SPORT0 Multi-Channel Transmit Select Register 3 */ -#define SPORT0_MRCS0 0xFFC00850 /* SPORT0 Multi-Channel Receive Select Register 0 */ -#define SPORT0_MRCS1 0xFFC00854 /* SPORT0 Multi-Channel Receive Select Register 1 */ -#define SPORT0_MRCS2 0xFFC00858 /* SPORT0 Multi-Channel Receive Select Register 2 */ -#define SPORT0_MRCS3 0xFFC0085C /* SPORT0 Multi-Channel Receive Select Register 3 */ -#define SPORT1_TCR1 0xFFC00900 /* SPORT1 Transmit Configuration 1 Register */ -#define SPORT1_TCR2 0xFFC00904 /* SPORT1 Transmit Configuration 2 Register */ -#define SPORT1_TCLKDIV 0xFFC00908 /* SPORT1 Transmit Clock Divider */ -#define SPORT1_TFSDIV 0xFFC0090C /* SPORT1 Transmit Frame Sync Divider */ -#define SPORT1_TX 0xFFC00910 /* SPORT1 TX Data Register */ -#define SPORT1_RX 0xFFC00918 /* SPORT1 RX Data Register */ -#define SPORT1_RCR1 0xFFC00920 /* SPORT1 Transmit Configuration 1 Register */ -#define SPORT1_RCR2 0xFFC00924 /* SPORT1 Transmit Configuration 2 Register */ -#define SPORT1_RCLKDIV 0xFFC00928 /* SPORT1 Receive Clock Divider */ -#define SPORT1_RFSDIV 0xFFC0092C /* SPORT1 Receive Frame Sync Divider */ -#define SPORT1_STAT 0xFFC00930 /* SPORT1 Status Register */ -#define SPORT1_CHNL 0xFFC00934 /* SPORT1 Current Channel Register */ -#define SPORT1_MCMC1 0xFFC00938 /* SPORT1 Multi-Channel Configuration Register 1 */ -#define SPORT1_MCMC2 0xFFC0093C /* SPORT1 Multi-Channel Configuration Register 2 */ -#define SPORT1_MTCS0 0xFFC00940 /* SPORT1 Multi-Channel Transmit Select Register 0 */ -#define SPORT1_MTCS1 0xFFC00944 /* SPORT1 Multi-Channel Transmit Select Register 1 */ -#define SPORT1_MTCS2 0xFFC00948 /* SPORT1 Multi-Channel Transmit Select Register 2 */ -#define SPORT1_MTCS3 0xFFC0094C /* SPORT1 Multi-Channel Transmit Select Register 3 */ -#define SPORT1_MRCS0 0xFFC00950 /* SPORT1 Multi-Channel Receive Select Register 0 */ -#define SPORT1_MRCS1 0xFFC00954 /* SPORT1 Multi-Channel Receive Select Register 1 */ -#define SPORT1_MRCS2 0xFFC00958 /* SPORT1 Multi-Channel Receive Select Register 2 */ -#define SPORT1_MRCS3 0xFFC0095C /* SPORT1 Multi-Channel Receive Select Register 3 */ -#define EBIU_AMGCTL 0xFFC00A00 /* Asynchronous Memory Global Control Register */ -#define EBIU_AMBCTL0 0xFFC00A04 /* Asynchronous Memory Bank Control Register 0 */ -#define EBIU_AMBCTL1 0xFFC00A08 /* Asynchronous Memory Bank Control Register 1 */ -#define EBIU_SDGCTL 0xFFC00A10 /* SDRAM Global Control Register */ -#define EBIU_SDBCTL 0xFFC00A14 /* SDRAM Bank Control Register */ -#define EBIU_SDRRC 0xFFC00A18 /* SDRAM Refresh Rate Control Register */ -#define EBIU_SDSTAT 0xFFC00A1C /* SDRAM Status Register */ -#define DMA0_NEXT_DESC_PTR 0xFFC00C00 /* DMA Channel 0 Next Descriptor Pointer Register */ -#define DMA0_START_ADDR 0xFFC00C04 /* DMA Channel 0 Start Address Register */ -#define DMA0_CONFIG 0xFFC00C08 /* DMA Channel 0 Configuration Register */ -#define DMA0_X_COUNT 0xFFC00C10 /* DMA Channel 0 X Count Register */ -#define DMA0_X_MODIFY 0xFFC00C14 /* DMA Channel 0 X Modify Register */ -#define DMA0_Y_COUNT 0xFFC00C18 /* DMA Channel 0 Y Count Register */ -#define DMA0_Y_MODIFY 0xFFC00C1C /* DMA Channel 0 Y Modify Register */ -#define DMA0_CURR_DESC_PTR 0xFFC00C20 /* DMA Channel 0 Current Descriptor Pointer Register */ -#define DMA0_CURR_ADDR 0xFFC00C24 /* DMA Channel 0 Current Address Register */ -#define DMA0_IRQ_STATUS 0xFFC00C28 /* DMA Channel 0 Interrupt/Status Register */ -#define DMA0_PERIPHERAL_MAP 0xFFC00C2C /* DMA Channel 0 Peripheral Map Register */ -#define DMA0_CURR_X_COUNT 0xFFC00C30 /* DMA Channel 0 Current X Count Register */ -#define DMA0_CURR_Y_COUNT 0xFFC00C38 /* DMA Channel 0 Current Y Count Register */ -#define DMA1_NEXT_DESC_PTR 0xFFC00C40 /* DMA Channel 1 Next Descriptor Pointer Register */ -#define DMA1_START_ADDR 0xFFC00C44 /* DMA Channel 1 Start Address Register */ -#define DMA1_CONFIG 0xFFC00C48 /* DMA Channel 1 Configuration Register */ -#define DMA1_X_COUNT 0xFFC00C50 /* DMA Channel 1 X Count Register */ -#define DMA1_X_MODIFY 0xFFC00C54 /* DMA Channel 1 X Modify Register */ -#define DMA1_Y_COUNT 0xFFC00C58 /* DMA Channel 1 Y Count Register */ -#define DMA1_Y_MODIFY 0xFFC00C5C /* DMA Channel 1 Y Modify Register */ -#define DMA1_CURR_DESC_PTR 0xFFC00C60 /* DMA Channel 1 Current Descriptor Pointer Register */ -#define DMA1_CURR_ADDR 0xFFC00C64 /* DMA Channel 1 Current Address Register */ -#define DMA1_IRQ_STATUS 0xFFC00C68 /* DMA Channel 1 Interrupt/Status Register */ -#define DMA1_PERIPHERAL_MAP 0xFFC00C6C /* DMA Channel 1 Peripheral Map Register */ -#define DMA1_CURR_X_COUNT 0xFFC00C70 /* DMA Channel 1 Current X Count Register */ -#define DMA1_CURR_Y_COUNT 0xFFC00C78 /* DMA Channel 1 Current Y Count Register */ -#define DMA2_NEXT_DESC_PTR 0xFFC00C80 /* DMA Channel 2 Next Descriptor Pointer Register */ -#define DMA2_START_ADDR 0xFFC00C84 /* DMA Channel 2 Start Address Register */ -#define DMA2_CONFIG 0xFFC00C88 /* DMA Channel 2 Configuration Register */ -#define DMA2_X_COUNT 0xFFC00C90 /* DMA Channel 2 X Count Register */ -#define DMA2_X_MODIFY 0xFFC00C94 /* DMA Channel 2 X Modify Register */ -#define DMA2_Y_COUNT 0xFFC00C98 /* DMA Channel 2 Y Count Register */ -#define DMA2_Y_MODIFY 0xFFC00C9C /* DMA Channel 2 Y Modify Register */ -#define DMA2_CURR_DESC_PTR 0xFFC00CA0 /* DMA Channel 2 Current Descriptor Pointer Register */ -#define DMA2_CURR_ADDR 0xFFC00CA4 /* DMA Channel 2 Current Address Register */ -#define DMA2_IRQ_STATUS 0xFFC00CA8 /* DMA Channel 2 Interrupt/Status Register */ -#define DMA2_PERIPHERAL_MAP 0xFFC00CAC /* DMA Channel 2 Peripheral Map Register */ -#define DMA2_CURR_X_COUNT 0xFFC00CB0 /* DMA Channel 2 Current X Count Register */ -#define DMA2_CURR_Y_COUNT 0xFFC00CB8 /* DMA Channel 2 Current Y Count Register */ -#define DMA3_NEXT_DESC_PTR 0xFFC00CC0 /* DMA Channel 3 Next Descriptor Pointer Register */ -#define DMA3_START_ADDR 0xFFC00CC4 /* DMA Channel 3 Start Address Register */ -#define DMA3_CONFIG 0xFFC00CC8 /* DMA Channel 3 Configuration Register */ -#define DMA3_X_COUNT 0xFFC00CD0 /* DMA Channel 3 X Count Register */ -#define DMA3_X_MODIFY 0xFFC00CD4 /* DMA Channel 3 X Modify Register */ -#define DMA3_Y_COUNT 0xFFC00CD8 /* DMA Channel 3 Y Count Register */ -#define DMA3_Y_MODIFY 0xFFC00CDC /* DMA Channel 3 Y Modify Register */ -#define DMA3_CURR_DESC_PTR 0xFFC00CE0 /* DMA Channel 3 Current Descriptor Pointer Register */ -#define DMA3_CURR_ADDR 0xFFC00CE4 /* DMA Channel 3 Current Address Register */ -#define DMA3_IRQ_STATUS 0xFFC00CE8 /* DMA Channel 3 Interrupt/Status Register */ -#define DMA3_PERIPHERAL_MAP 0xFFC00CEC /* DMA Channel 3 Peripheral Map Register */ -#define DMA3_CURR_X_COUNT 0xFFC00CF0 /* DMA Channel 3 Current X Count Register */ -#define DMA3_CURR_Y_COUNT 0xFFC00CF8 /* DMA Channel 3 Current Y Count Register */ -#define DMA4_NEXT_DESC_PTR 0xFFC00D00 /* DMA Channel 4 Next Descriptor Pointer Register */ -#define DMA4_START_ADDR 0xFFC00D04 /* DMA Channel 4 Start Address Register */ -#define DMA4_CONFIG 0xFFC00D08 /* DMA Channel 4 Configuration Register */ -#define DMA4_X_COUNT 0xFFC00D10 /* DMA Channel 4 X Count Register */ -#define DMA4_X_MODIFY 0xFFC00D14 /* DMA Channel 4 X Modify Register */ -#define DMA4_Y_COUNT 0xFFC00D18 /* DMA Channel 4 Y Count Register */ -#define DMA4_Y_MODIFY 0xFFC00D1C /* DMA Channel 4 Y Modify Register */ -#define DMA4_CURR_DESC_PTR 0xFFC00D20 /* DMA Channel 4 Current Descriptor Pointer Register */ -#define DMA4_CURR_ADDR 0xFFC00D24 /* DMA Channel 4 Current Address Register */ -#define DMA4_IRQ_STATUS 0xFFC00D28 /* DMA Channel 4 Interrupt/Status Register */ -#define DMA4_PERIPHERAL_MAP 0xFFC00D2C /* DMA Channel 4 Peripheral Map Register */ -#define DMA4_CURR_X_COUNT 0xFFC00D30 /* DMA Channel 4 Current X Count Register */ -#define DMA4_CURR_Y_COUNT 0xFFC00D38 /* DMA Channel 4 Current Y Count Register */ -#define DMA5_NEXT_DESC_PTR 0xFFC00D40 /* DMA Channel 5 Next Descriptor Pointer Register */ -#define DMA5_START_ADDR 0xFFC00D44 /* DMA Channel 5 Start Address Register */ -#define DMA5_CONFIG 0xFFC00D48 /* DMA Channel 5 Configuration Register */ -#define DMA5_X_COUNT 0xFFC00D50 /* DMA Channel 5 X Count Register */ -#define DMA5_X_MODIFY 0xFFC00D54 /* DMA Channel 5 X Modify Register */ -#define DMA5_Y_COUNT 0xFFC00D58 /* DMA Channel 5 Y Count Register */ -#define DMA5_Y_MODIFY 0xFFC00D5C /* DMA Channel 5 Y Modify Register */ -#define DMA5_CURR_DESC_PTR 0xFFC00D60 /* DMA Channel 5 Current Descriptor Pointer Register */ -#define DMA5_CURR_ADDR 0xFFC00D64 /* DMA Channel 5 Current Address Register */ -#define DMA5_IRQ_STATUS 0xFFC00D68 /* DMA Channel 5 Interrupt/Status Register */ -#define DMA5_PERIPHERAL_MAP 0xFFC00D6C /* DMA Channel 5 Peripheral Map Register */ -#define DMA5_CURR_X_COUNT 0xFFC00D70 /* DMA Channel 5 Current X Count Register */ -#define DMA5_CURR_Y_COUNT 0xFFC00D78 /* DMA Channel 5 Current Y Count Register */ -#define DMA6_NEXT_DESC_PTR 0xFFC00D80 /* DMA Channel 6 Next Descriptor Pointer Register */ -#define DMA6_START_ADDR 0xFFC00D84 /* DMA Channel 6 Start Address Register */ -#define DMA6_CONFIG 0xFFC00D88 /* DMA Channel 6 Configuration Register */ -#define DMA6_X_COUNT 0xFFC00D90 /* DMA Channel 6 X Count Register */ -#define DMA6_X_MODIFY 0xFFC00D94 /* DMA Channel 6 X Modify Register */ -#define DMA6_Y_COUNT 0xFFC00D98 /* DMA Channel 6 Y Count Register */ -#define DMA6_Y_MODIFY 0xFFC00D9C /* DMA Channel 6 Y Modify Register */ -#define DMA6_CURR_DESC_PTR 0xFFC00DA0 /* DMA Channel 6 Current Descriptor Pointer Register */ -#define DMA6_CURR_ADDR 0xFFC00DA4 /* DMA Channel 6 Current Address Register */ -#define DMA6_IRQ_STATUS 0xFFC00DA8 /* DMA Channel 6 Interrupt/Status Register */ -#define DMA6_PERIPHERAL_MAP 0xFFC00DAC /* DMA Channel 6 Peripheral Map Register */ -#define DMA6_CURR_X_COUNT 0xFFC00DB0 /* DMA Channel 6 Current X Count Register */ -#define DMA6_CURR_Y_COUNT 0xFFC00DB8 /* DMA Channel 6 Current Y Count Register */ -#define DMA7_NEXT_DESC_PTR 0xFFC00DC0 /* DMA Channel 7 Next Descriptor Pointer Register */ -#define DMA7_START_ADDR 0xFFC00DC4 /* DMA Channel 7 Start Address Register */ -#define DMA7_CONFIG 0xFFC00DC8 /* DMA Channel 7 Configuration Register */ -#define DMA7_X_COUNT 0xFFC00DD0 /* DMA Channel 7 X Count Register */ -#define DMA7_X_MODIFY 0xFFC00DD4 /* DMA Channel 7 X Modify Register */ -#define DMA7_Y_COUNT 0xFFC00DD8 /* DMA Channel 7 Y Count Register */ -#define DMA7_Y_MODIFY 0xFFC00DDC /* DMA Channel 7 Y Modify Register */ -#define DMA7_CURR_DESC_PTR 0xFFC00DE0 /* DMA Channel 7 Current Descriptor Pointer Register */ -#define DMA7_CURR_ADDR 0xFFC00DE4 /* DMA Channel 7 Current Address Register */ -#define DMA7_IRQ_STATUS 0xFFC00DE8 /* DMA Channel 7 Interrupt/Status Register */ -#define DMA7_PERIPHERAL_MAP 0xFFC00DEC /* DMA Channel 7 Peripheral Map Register */ -#define DMA7_CURR_X_COUNT 0xFFC00DF0 /* DMA Channel 7 Current X Count Register */ -#define DMA7_CURR_Y_COUNT 0xFFC00DF8 /* DMA Channel 7 Current Y Count Register */ -#define DMA8_NEXT_DESC_PTR 0xFFC00E00 /* DMA Channel 8 Next Descriptor Pointer Register */ -#define DMA8_START_ADDR 0xFFC00E04 /* DMA Channel 8 Start Address Register */ -#define DMA8_CONFIG 0xFFC00E08 /* DMA Channel 8 Configuration Register */ -#define DMA8_X_COUNT 0xFFC00E10 /* DMA Channel 8 X Count Register */ -#define DMA8_X_MODIFY 0xFFC00E14 /* DMA Channel 8 X Modify Register */ -#define DMA8_Y_COUNT 0xFFC00E18 /* DMA Channel 8 Y Count Register */ -#define DMA8_Y_MODIFY 0xFFC00E1C /* DMA Channel 8 Y Modify Register */ -#define DMA8_CURR_DESC_PTR 0xFFC00E20 /* DMA Channel 8 Current Descriptor Pointer Register */ -#define DMA8_CURR_ADDR 0xFFC00E24 /* DMA Channel 8 Current Address Register */ -#define DMA8_IRQ_STATUS 0xFFC00E28 /* DMA Channel 8 Interrupt/Status Register */ -#define DMA8_PERIPHERAL_MAP 0xFFC00E2C /* DMA Channel 8 Peripheral Map Register */ -#define DMA8_CURR_X_COUNT 0xFFC00E30 /* DMA Channel 8 Current X Count Register */ -#define DMA8_CURR_Y_COUNT 0xFFC00E38 /* DMA Channel 8 Current Y Count Register */ -#define DMA9_NEXT_DESC_PTR 0xFFC00E40 /* DMA Channel 9 Next Descriptor Pointer Register */ -#define DMA9_START_ADDR 0xFFC00E44 /* DMA Channel 9 Start Address Register */ -#define DMA9_CONFIG 0xFFC00E48 /* DMA Channel 9 Configuration Register */ -#define DMA9_X_COUNT 0xFFC00E50 /* DMA Channel 9 X Count Register */ -#define DMA9_X_MODIFY 0xFFC00E54 /* DMA Channel 9 X Modify Register */ -#define DMA9_Y_COUNT 0xFFC00E58 /* DMA Channel 9 Y Count Register */ -#define DMA9_Y_MODIFY 0xFFC00E5C /* DMA Channel 9 Y Modify Register */ -#define DMA9_CURR_DESC_PTR 0xFFC00E60 /* DMA Channel 9 Current Descriptor Pointer Register */ -#define DMA9_CURR_ADDR 0xFFC00E64 /* DMA Channel 9 Current Address Register */ -#define DMA9_IRQ_STATUS 0xFFC00E68 /* DMA Channel 9 Interrupt/Status Register */ -#define DMA9_PERIPHERAL_MAP 0xFFC00E6C /* DMA Channel 9 Peripheral Map Register */ -#define DMA9_CURR_X_COUNT 0xFFC00E70 /* DMA Channel 9 Current X Count Register */ -#define DMA9_CURR_Y_COUNT 0xFFC00E78 /* DMA Channel 9 Current Y Count Register */ -#define DMA10_NEXT_DESC_PTR 0xFFC00E80 /* DMA Channel 10 Next Descriptor Pointer Register */ -#define DMA10_START_ADDR 0xFFC00E84 /* DMA Channel 10 Start Address Register */ -#define DMA10_CONFIG 0xFFC00E88 /* DMA Channel 10 Configuration Register */ -#define DMA10_X_COUNT 0xFFC00E90 /* DMA Channel 10 X Count Register */ -#define DMA10_X_MODIFY 0xFFC00E94 /* DMA Channel 10 X Modify Register */ -#define DMA10_Y_COUNT 0xFFC00E98 /* DMA Channel 10 Y Count Register */ -#define DMA10_Y_MODIFY 0xFFC00E9C /* DMA Channel 10 Y Modify Register */ -#define DMA10_CURR_DESC_PTR 0xFFC00EA0 /* DMA Channel 10 Current Descriptor Pointer Register */ -#define DMA10_CURR_ADDR 0xFFC00EA4 /* DMA Channel 10 Current Address Register */ -#define DMA10_IRQ_STATUS 0xFFC00EA8 /* DMA Channel 10 Interrupt/Status Register */ -#define DMA10_PERIPHERAL_MAP 0xFFC00EAC /* DMA Channel 10 Peripheral Map Register */ -#define DMA10_CURR_X_COUNT 0xFFC00EB0 /* DMA Channel 10 Current X Count Register */ -#define DMA10_CURR_Y_COUNT 0xFFC00EB8 /* DMA Channel 10 Current Y Count Register */ -#define DMA11_NEXT_DESC_PTR 0xFFC00EC0 /* DMA Channel 11 Next Descriptor Pointer Register */ -#define DMA11_START_ADDR 0xFFC00EC4 /* DMA Channel 11 Start Address Register */ -#define DMA11_CONFIG 0xFFC00EC8 /* DMA Channel 11 Configuration Register */ -#define DMA11_X_COUNT 0xFFC00ED0 /* DMA Channel 11 X Count Register */ -#define DMA11_X_MODIFY 0xFFC00ED4 /* DMA Channel 11 X Modify Register */ -#define DMA11_Y_COUNT 0xFFC00ED8 /* DMA Channel 11 Y Count Register */ -#define DMA11_Y_MODIFY 0xFFC00EDC /* DMA Channel 11 Y Modify Register */ -#define DMA11_CURR_DESC_PTR 0xFFC00EE0 /* DMA Channel 11 Current Descriptor Pointer Register */ -#define DMA11_CURR_ADDR 0xFFC00EE4 /* DMA Channel 11 Current Address Register */ -#define DMA11_IRQ_STATUS 0xFFC00EE8 /* DMA Channel 11 Interrupt/Status Register */ -#define DMA11_PERIPHERAL_MAP 0xFFC00EEC /* DMA Channel 11 Peripheral Map Register */ -#define DMA11_CURR_X_COUNT 0xFFC00EF0 /* DMA Channel 11 Current X Count Register */ -#define DMA11_CURR_Y_COUNT 0xFFC00EF8 /* DMA Channel 11 Current Y Count Register */ -#define MDMA_S0_NEXT_DESC_PTR 0xFFC00F40 /* MemDMA Stream 0 Source Next Descriptor Pointer Register */ -#define MDMA_S0_START_ADDR 0xFFC00F44 /* MemDMA Stream 0 Source Start Address Register */ -#define MDMA_S0_CONFIG 0xFFC00F48 /* MemDMA Stream 0 Source Configuration Register */ -#define MDMA_S0_X_COUNT 0xFFC00F50 /* MemDMA Stream 0 Source X Count Register */ -#define MDMA_S0_X_MODIFY 0xFFC00F54 /* MemDMA Stream 0 Source X Modify Register */ -#define MDMA_S0_Y_COUNT 0xFFC00F58 /* MemDMA Stream 0 Source Y Count Register */ -#define MDMA_S0_Y_MODIFY 0xFFC00F5C /* MemDMA Stream 0 Source Y Modify Register */ -#define MDMA_S0_CURR_DESC_PTR 0xFFC00F60 /* MemDMA Stream 0 Source Current Descriptor Pointer Register */ -#define MDMA_S0_CURR_ADDR 0xFFC00F64 /* MemDMA Stream 0 Source Current Address Register */ -#define MDMA_S0_IRQ_STATUS 0xFFC00F68 /* MemDMA Stream 0 Source Interrupt/Status Register */ -#define MDMA_S0_PERIPHERAL_MAP 0xFFC00F6C /* MemDMA Stream 0 Source Peripheral Map Register */ -#define MDMA_S0_CURR_X_COUNT 0xFFC00F70 /* MemDMA Stream 0 Source Current X Count Register */ -#define MDMA_S0_CURR_Y_COUNT 0xFFC00F78 /* MemDMA Stream 0 Source Current Y Count Register */ -#define MDMA_D0_NEXT_DESC_PTR 0xFFC00F00 /* MemDMA Stream 0 Destination Next Descriptor Pointer Register */ -#define MDMA_D0_START_ADDR 0xFFC00F04 /* MemDMA Stream 0 Destination Start Address Register */ -#define MDMA_D0_CONFIG 0xFFC00F08 /* MemDMA Stream 0 Destination Configuration Register */ -#define MDMA_D0_X_COUNT 0xFFC00F10 /* MemDMA Stream 0 Destination X Count Register */ -#define MDMA_D0_X_MODIFY 0xFFC00F14 /* MemDMA Stream 0 Destination X Modify Register */ -#define MDMA_D0_Y_COUNT 0xFFC00F18 /* MemDMA Stream 0 Destination Y Count Register */ -#define MDMA_D0_Y_MODIFY 0xFFC00F1C /* MemDMA Stream 0 Destination Y Modify Register */ -#define MDMA_D0_CURR_DESC_PTR 0xFFC00F20 /* MemDMA Stream 0 Destination Current Descriptor Pointer Register */ -#define MDMA_D0_CURR_ADDR 0xFFC00F24 /* MemDMA Stream 0 Destination Current Address Register */ -#define MDMA_D0_IRQ_STATUS 0xFFC00F28 /* MemDMA Stream 0 Destination Interrupt/Status Register */ -#define MDMA_D0_PERIPHERAL_MAP 0xFFC00F2C /* MemDMA Stream 0 Destination Peripheral Map Register */ -#define MDMA_D0_CURR_X_COUNT 0xFFC00F30 /* MemDMA Stream 0 Destination Current X Count Register */ -#define MDMA_D0_CURR_Y_COUNT 0xFFC00F38 /* MemDMA Stream 0 Destination Current Y Count Register */ -#define MDMA_S1_NEXT_DESC_PTR 0xFFC00FC0 /* MemDMA Stream 1 Source Next Descriptor Pointer Register */ -#define MDMA_S1_START_ADDR 0xFFC00FC4 /* MemDMA Stream 1 Source Start Address Register */ -#define MDMA_S1_CONFIG 0xFFC00FC8 /* MemDMA Stream 1 Source Configuration Register */ -#define MDMA_S1_X_COUNT 0xFFC00FD0 /* MemDMA Stream 1 Source X Count Register */ -#define MDMA_S1_X_MODIFY 0xFFC00FD4 /* MemDMA Stream 1 Source X Modify Register */ -#define MDMA_S1_Y_COUNT 0xFFC00FD8 /* MemDMA Stream 1 Source Y Count Register */ -#define MDMA_S1_Y_MODIFY 0xFFC00FDC /* MemDMA Stream 1 Source Y Modify Register */ -#define MDMA_S1_CURR_DESC_PTR 0xFFC00FE0 /* MemDMA Stream 1 Source Current Descriptor Pointer Register */ -#define MDMA_S1_CURR_ADDR 0xFFC00FE4 /* MemDMA Stream 1 Source Current Address Register */ -#define MDMA_S1_IRQ_STATUS 0xFFC00FE8 /* MemDMA Stream 1 Source Interrupt/Status Register */ -#define MDMA_S1_PERIPHERAL_MAP 0xFFC00FEC /* MemDMA Stream 1 Source Peripheral Map Register */ -#define MDMA_S1_CURR_X_COUNT 0xFFC00FF0 /* MemDMA Stream 1 Source Current X Count Register */ -#define MDMA_S1_CURR_Y_COUNT 0xFFC00FF8 /* MemDMA Stream 1 Source Current Y Count Register */ -#define MDMA_D1_NEXT_DESC_PTR 0xFFC00F80 /* MemDMA Stream 1 Destination Next Descriptor Pointer Register */ -#define MDMA_D1_START_ADDR 0xFFC00F84 /* MemDMA Stream 1 Destination Start Address Register */ -#define MDMA_D1_CONFIG 0xFFC00F88 /* MemDMA Stream 1 Destination Configuration Register */ -#define MDMA_D1_X_COUNT 0xFFC00F90 /* MemDMA Stream 1 Destination X Count Register */ -#define MDMA_D1_X_MODIFY 0xFFC00F94 /* MemDMA Stream 1 Destination X Modify Register */ -#define MDMA_D1_Y_COUNT 0xFFC00F98 /* MemDMA Stream 1 Destination Y Count Register */ -#define MDMA_D1_Y_MODIFY 0xFFC00F9C /* MemDMA Stream 1 Destination Y Modify Register */ -#define MDMA_D1_CURR_DESC_PTR 0xFFC00FA0 /* MemDMA Stream 1 Destination Current Descriptor Pointer Register */ -#define MDMA_D1_CURR_ADDR 0xFFC00FA4 /* MemDMA Stream 1 Destination Current Address Register */ -#define MDMA_D1_IRQ_STATUS 0xFFC00FA8 /* MemDMA Stream 1 Destination Interrupt/Status Register */ -#define MDMA_D1_PERIPHERAL_MAP 0xFFC00FAC /* MemDMA Stream 1 Destination Peripheral Map Register */ -#define MDMA_D1_CURR_X_COUNT 0xFFC00FB0 /* MemDMA Stream 1 Destination Current X Count Register */ -#define MDMA_D1_CURR_Y_COUNT 0xFFC00FB8 /* MemDMA Stream 1 Destination Current Y Count Register */ -#define PPI_CONTROL 0xFFC01000 /* PPI Control Register */ -#define PPI_STATUS 0xFFC01004 /* PPI Status Register */ -#define PPI_COUNT 0xFFC01008 /* PPI Transfer Count Register */ -#define PPI_DELAY 0xFFC0100C /* PPI Delay Count Register */ -#define PPI_FRAME 0xFFC01010 /* PPI Frame Length Register */ -#define TWI_CLKDIV 0xFFC01400 /* Serial Clock Divider Register */ -#define TWI_CONTROL 0xFFC01404 /* TWI Control Register */ -#define TWI_SLAVE_CTL 0xFFC01408 /* Slave Mode Control Register */ -#define TWI_SLAVE_STAT 0xFFC0140C /* Slave Mode Status Register */ -#define TWI_SLAVE_ADDR 0xFFC01410 /* Slave Mode Address Register */ -#define TWI_MASTER_CTL 0xFFC01414 /* Master Mode Control Register */ -#define TWI_MASTER_STAT 0xFFC01418 /* Master Mode Status Register */ -#define TWI_MASTER_ADDR 0xFFC0141C /* Master Mode Address Register */ -#define TWI_INT_STAT 0xFFC01420 /* TWI Interrupt Status Register */ -#define TWI_INT_MASK 0xFFC01424 /* TWI Master Interrupt Mask Register */ -#define TWI_FIFO_CTL 0xFFC01428 /* FIFO Control Register */ -#define TWI_FIFO_STAT 0xFFC0142C /* FIFO Status Register */ -#define TWI_XMT_DATA8 0xFFC01480 /* FIFO Transmit Data Single Byte Register */ -#define TWI_XMT_DATA16 0xFFC01484 /* FIFO Transmit Data Double Byte Register */ -#define TWI_RCV_DATA8 0xFFC01488 /* FIFO Receive Data Single Byte Register */ -#define TWI_RCV_DATA16 0xFFC0148C /* FIFO Receive Data Double Byte Register */ -#define PORTGIO 0xFFC01500 /* Port G I/O Pin State Specify Register */ -#define PORTGIO_CLEAR 0xFFC01504 /* Port G I/O Peripheral Interrupt Clear Register */ -#define PORTGIO_SET 0xFFC01508 /* Port G I/O Peripheral Interrupt Set Register */ -#define PORTGIO_TOGGLE 0xFFC0150C /* Port G I/O Pin State Toggle Register */ -#define PORTGIO_MASKA 0xFFC01510 /* Port G I/O Mask State Specify Interrupt A Register */ -#define PORTGIO_MASKA_CLEAR 0xFFC01514 /* Port G I/O Mask Disable Interrupt A Register */ -#define PORTGIO_MASKA_SET 0xFFC01518 /* Port G I/O Mask Enable Interrupt A Register */ -#define PORTGIO_MASKA_TOGGLE 0xFFC0151C /* Port G I/O Mask Toggle Enable Interrupt A Register */ -#define PORTGIO_MASKB 0xFFC01520 /* Port G I/O Mask State Specify Interrupt B Register */ -#define PORTGIO_MASKB_CLEAR 0xFFC01524 /* Port G I/O Mask Disable Interrupt B Register */ -#define PORTGIO_MASKB_SET 0xFFC01528 /* Port G I/O Mask Enable Interrupt B Register */ -#define PORTGIO_MASKB_TOGGLE 0xFFC0152C /* Port G I/O Mask Toggle Enable Interrupt B Register */ -#define PORTGIO_DIR 0xFFC01530 /* Port G I/O Direction Register */ -#define PORTGIO_POLAR 0xFFC01534 /* Port G I/O Source Polarity Register */ -#define PORTGIO_EDGE 0xFFC01538 /* Port G I/O Source Sensitivity Register */ -#define PORTGIO_BOTH 0xFFC0153C /* Port G I/O Set on BOTH Edges Register */ -#define PORTGIO_INEN 0xFFC01540 /* Port G I/O Input Enable Register */ -#define PORTHIO 0xFFC01700 /* Port H I/O Pin State Specify Register */ -#define PORTHIO_CLEAR 0xFFC01704 /* Port H I/O Peripheral Interrupt Clear Register */ -#define PORTHIO_SET 0xFFC01708 /* Port H I/O Peripheral Interrupt Set Register */ -#define PORTHIO_TOGGLE 0xFFC0170C /* Port H I/O Pin State Toggle Register */ -#define PORTHIO_MASKA 0xFFC01710 /* Port H I/O Mask State Specify Interrupt A Register */ -#define PORTHIO_MASKA_CLEAR 0xFFC01714 /* Port H I/O Mask Disable Interrupt A Register */ -#define PORTHIO_MASKA_SET 0xFFC01718 /* Port H I/O Mask Enable Interrupt A Register */ -#define PORTHIO_MASKA_TOGGLE 0xFFC0171C /* Port H I/O Mask Toggle Enable Interrupt A Register */ -#define PORTHIO_MASKB 0xFFC01720 /* Port H I/O Mask State Specify Interrupt B Register */ -#define PORTHIO_MASKB_CLEAR 0xFFC01724 /* Port H I/O Mask Disable Interrupt B Register */ -#define PORTHIO_MASKB_SET 0xFFC01728 /* Port H I/O Mask Enable Interrupt B Register */ -#define PORTHIO_MASKB_TOGGLE 0xFFC0172C /* Port H I/O Mask Toggle Enable Interrupt B Register */ -#define PORTHIO_DIR 0xFFC01730 /* Port H I/O Direction Register */ -#define PORTHIO_POLAR 0xFFC01734 /* Port H I/O Source Polarity Register */ -#define PORTHIO_EDGE 0xFFC01738 /* Port H I/O Source Sensitivity Register */ -#define PORTHIO_BOTH 0xFFC0173C /* Port H I/O Set on BOTH Edges Register */ -#define PORTHIO_INEN 0xFFC01740 /* Port H I/O Input Enable Register */ -#define UART1_THR 0xFFC02000 /* Transmit Holding register */ -#define UART1_RBR 0xFFC02000 /* Receive Buffer register */ -#define UART1_DLL 0xFFC02000 /* Divisor Latch (Low-Byte) */ -#define UART1_IER 0xFFC02004 /* Interrupt Enable Register */ -#define UART1_DLH 0xFFC02004 /* Divisor Latch (High-Byte) */ -#define UART1_IIR 0xFFC02008 /* Interrupt Identification Register */ -#define UART1_LCR 0xFFC0200C /* Line Control Register */ -#define UART1_MCR 0xFFC02010 /* Modem Control Register */ -#define UART1_LSR 0xFFC02014 /* Line Status Register */ -#define UART1_MSR 0xFFC02018 /* Modem Status Register */ -#define UART1_SCR 0xFFC0201C /* SCR Scratch Register */ -#define UART1_GCTL 0xFFC02024 /* Global Control Register */ -#define CAN_MC1 0xFFC02A00 /* Mailbox config reg 1 */ -#define CAN_MD1 0xFFC02A04 /* Mailbox direction reg 1 */ -#define CAN_TRS1 0xFFC02A08 /* Transmit Request Set reg 1 */ -#define CAN_TRR1 0xFFC02A0C /* Transmit Request Reset reg 1 */ -#define CAN_TA1 0xFFC02A10 /* Transmit Acknowledge reg 1 */ -#define CAN_AA1 0xFFC02A14 /* Transmit Abort Acknowledge reg 1 */ -#define CAN_RMP1 0xFFC02A18 /* Receive Message Pending reg 1 */ -#define CAN_RML1 0xFFC02A1C /* Receive Message Lost reg 1 */ -#define CAN_MBTIF1 0xFFC02A20 /* Mailbox Transmit Interrupt Flag reg 1 */ -#define CAN_MBRIF1 0xFFC02A24 /* Mailbox Receive Interrupt Flag reg 1 */ -#define CAN_MBIM1 0xFFC02A28 /* Mailbox Interrupt Mask reg 1 */ -#define CAN_RFH1 0xFFC02A2C /* Remote Frame Handling reg 1 */ -#define CAN_OPSS1 0xFFC02A30 /* Overwrite Protection Single Shot Xmission reg 1 */ -#define CAN_MC2 0xFFC02A40 /* Mailbox config reg 2 */ -#define CAN_MD2 0xFFC02A44 /* Mailbox direction reg 2 */ -#define CAN_TRS2 0xFFC02A48 /* Transmit Request Set reg 2 */ -#define CAN_TRR2 0xFFC02A4C /* Transmit Request Reset reg 2 */ -#define CAN_TA2 0xFFC02A50 /* Transmit Acknowledge reg 2 */ -#define CAN_AA2 0xFFC02A54 /* Transmit Abort Acknowledge reg 2 */ -#define CAN_RMP2 0xFFC02A58 /* Receive Message Pending reg 2 */ -#define CAN_RML2 0xFFC02A5C /* Receive Message Lost reg 2 */ -#define CAN_MBTIF2 0xFFC02A60 /* Mailbox Transmit Interrupt Flag reg 2 */ -#define CAN_MBRIF2 0xFFC02A64 /* Mailbox Receive Interrupt Flag reg 2 */ -#define CAN_MBIM2 0xFFC02A68 /* Mailbox Interrupt Mask reg 2 */ -#define CAN_RFH2 0xFFC02A6C /* Remote Frame Handling reg 2 */ -#define CAN_OPSS2 0xFFC02A70 /* Overwrite Protection Single Shot Xmission reg 2 */ -#define CAN_CLOCK 0xFFC02A80 /* Bit Timing Configuration register 0 */ -#define CAN_TIMING 0xFFC02A84 /* Bit Timing Configuration register 1 */ -#define CAN_DEBUG 0xFFC02A88 /* Config register */ -#define CAN_STATUS 0xFFC02A8C /* Global Status Register */ -#define CAN_CEC 0xFFC02A90 /* Error Counter Register */ -#define CAN_GIS 0xFFC02A94 /* Global Interrupt Status Register */ -#define CAN_GIM 0xFFC02A98 /* Global Interrupt Mask Register */ -#define CAN_GIF 0xFFC02A9C /* Global Interrupt Flag Register */ -#define CAN_CONTROL 0xFFC02AA0 /* Master Control Register */ -#define CAN_INTR 0xFFC02AA4 /* Interrupt Pending Register */ -#define CAN_VERSION 0xFFC02AA8 /* Version Code Register */ -#define CAN_MBTD 0xFFC02AAC /* Mailbox Temporary Disable Feature */ -#define CAN_EWR 0xFFC02AB0 /* Programmable Warning Level */ -#define CAN_ESR 0xFFC02AB4 /* Error Status Register */ -#define CAN_UCREG 0xFFC02AC0 /* Universal Counter Register/Capture Register */ -#define CAN_UCCNT 0xFFC02AC4 /* Universal Counter */ -#define CAN_UCRC 0xFFC02AC8 /* Universal Counter Force Reload Register */ -#define CAN_UCCNF 0xFFC02ACC /* Universal Counter Configuration Register */ -#define CAN_VERSION2 0xFFC02AD4 /* Version Code Register 2 */ -#define CAN_AM00L 0xFFC02B00 /* Mailbox 0 Low Acceptance Mask */ -#define CAN_AM00H 0xFFC02B04 /* Mailbox 0 High Acceptance Mask */ -#define CAN_AM01L 0xFFC02B08 /* Mailbox 1 Low Acceptance Mask */ -#define CAN_AM01H 0xFFC02B0C /* Mailbox 1 High Acceptance Mask */ -#define CAN_AM02L 0xFFC02B10 /* Mailbox 2 Low Acceptance Mask */ -#define CAN_AM02H 0xFFC02B14 /* Mailbox 2 High Acceptance Mask */ -#define CAN_AM03L 0xFFC02B18 /* Mailbox 3 Low Acceptance Mask */ -#define CAN_AM03H 0xFFC02B1C /* Mailbox 3 High Acceptance Mask */ -#define CAN_AM04L 0xFFC02B20 /* Mailbox 4 Low Acceptance Mask */ -#define CAN_AM04H 0xFFC02B24 /* Mailbox 4 High Acceptance Mask */ -#define CAN_AM05L 0xFFC02B28 /* Mailbox 5 Low Acceptance Mask */ -#define CAN_AM05H 0xFFC02B2C /* Mailbox 5 High Acceptance Mask */ -#define CAN_AM06L 0xFFC02B30 /* Mailbox 6 Low Acceptance Mask */ -#define CAN_AM06H 0xFFC02B34 /* Mailbox 6 High Acceptance Mask */ -#define CAN_AM07L 0xFFC02B38 /* Mailbox 7 Low Acceptance Mask */ -#define CAN_AM07H 0xFFC02B3C /* Mailbox 7 High Acceptance Mask */ -#define CAN_AM08L 0xFFC02B40 /* Mailbox 8 Low Acceptance Mask */ -#define CAN_AM08H 0xFFC02B44 /* Mailbox 8 High Acceptance Mask */ -#define CAN_AM09L 0xFFC02B48 /* Mailbox 9 Low Acceptance Mask */ -#define CAN_AM09H 0xFFC02B4C /* Mailbox 9 High Acceptance Mask */ -#define CAN_AM10L 0xFFC02B50 /* Mailbox 10 Low Acceptance Mask */ -#define CAN_AM10H 0xFFC02B54 /* Mailbox 10 High Acceptance Mask */ -#define CAN_AM11L 0xFFC02B58 /* Mailbox 11 Low Acceptance Mask */ -#define CAN_AM11H 0xFFC02B5C /* Mailbox 11 High Acceptance Mask */ -#define CAN_AM12L 0xFFC02B60 /* Mailbox 12 Low Acceptance Mask */ -#define CAN_AM12H 0xFFC02B64 /* Mailbox 12 High Acceptance Mask */ -#define CAN_AM13L 0xFFC02B68 /* Mailbox 13 Low Acceptance Mask */ -#define CAN_AM13H 0xFFC02B6C /* Mailbox 13 High Acceptance Mask */ -#define CAN_AM14L 0xFFC02B70 /* Mailbox 14 Low Acceptance Mask */ -#define CAN_AM14H 0xFFC02B74 /* Mailbox 14 High Acceptance Mask */ -#define CAN_AM15L 0xFFC02B78 /* Mailbox 15 Low Acceptance Mask */ -#define CAN_AM15H 0xFFC02B7C /* Mailbox 15 High Acceptance Mask */ -#define CAN_AM16L 0xFFC02B80 /* Mailbox 16 Low Acceptance Mask */ -#define CAN_AM16H 0xFFC02B84 /* Mailbox 16 High Acceptance Mask */ -#define CAN_AM17L 0xFFC02B88 /* Mailbox 17 Low Acceptance Mask */ -#define CAN_AM17H 0xFFC02B8C /* Mailbox 17 High Acceptance Mask */ -#define CAN_AM18L 0xFFC02B90 /* Mailbox 18 Low Acceptance Mask */ -#define CAN_AM18H 0xFFC02B94 /* Mailbox 18 High Acceptance Mask */ -#define CAN_AM19L 0xFFC02B98 /* Mailbox 19 Low Acceptance Mask */ -#define CAN_AM19H 0xFFC02B9C /* Mailbox 19 High Acceptance Mask */ -#define CAN_AM20L 0xFFC02BA0 /* Mailbox 20 Low Acceptance Mask */ -#define CAN_AM20H 0xFFC02BA4 /* Mailbox 20 High Acceptance Mask */ -#define CAN_AM21L 0xFFC02BA8 /* Mailbox 21 Low Acceptance Mask */ -#define CAN_AM21H 0xFFC02BAC /* Mailbox 21 High Acceptance Mask */ -#define CAN_AM22L 0xFFC02BB0 /* Mailbox 22 Low Acceptance Mask */ -#define CAN_AM22H 0xFFC02BB4 /* Mailbox 22 High Acceptance Mask */ -#define CAN_AM23L 0xFFC02BB8 /* Mailbox 23 Low Acceptance Mask */ -#define CAN_AM23H 0xFFC02BBC /* Mailbox 23 High Acceptance Mask */ -#define CAN_AM24L 0xFFC02BC0 /* Mailbox 24 Low Acceptance Mask */ -#define CAN_AM24H 0xFFC02BC4 /* Mailbox 24 High Acceptance Mask */ -#define CAN_AM25L 0xFFC02BC8 /* Mailbox 25 Low Acceptance Mask */ -#define CAN_AM25H 0xFFC02BCC /* Mailbox 25 High Acceptance Mask */ -#define CAN_AM26L 0xFFC02BD0 /* Mailbox 26 Low Acceptance Mask */ -#define CAN_AM26H 0xFFC02BD4 /* Mailbox 26 High Acceptance Mask */ -#define CAN_AM27L 0xFFC02BD8 /* Mailbox 27 Low Acceptance Mask */ -#define CAN_AM27H 0xFFC02BDC /* Mailbox 27 High Acceptance Mask */ -#define CAN_AM28L 0xFFC02BE0 /* Mailbox 28 Low Acceptance Mask */ -#define CAN_AM28H 0xFFC02BE4 /* Mailbox 28 High Acceptance Mask */ -#define CAN_AM29L 0xFFC02BE8 /* Mailbox 29 Low Acceptance Mask */ -#define CAN_AM29H 0xFFC02BEC /* Mailbox 29 High Acceptance Mask */ -#define CAN_AM30L 0xFFC02BF0 /* Mailbox 30 Low Acceptance Mask */ -#define CAN_AM30H 0xFFC02BF4 /* Mailbox 30 High Acceptance Mask */ -#define CAN_AM31L 0xFFC02BF8 /* Mailbox 31 Low Acceptance Mask */ -#define CAN_AM31H 0xFFC02BFC /* Mailbox 31 High Acceptance Mask */ -#define CAN_MB00_DATA0 0xFFC02C00 /* Mailbox 0 Data Word 0 [15:0] Register */ -#define CAN_MB00_DATA1 0xFFC02C04 /* Mailbox 0 Data Word 1 [31:16] Register */ -#define CAN_MB00_DATA2 0xFFC02C08 /* Mailbox 0 Data Word 2 [47:32] Register */ -#define CAN_MB00_DATA3 0xFFC02C0C /* Mailbox 0 Data Word 3 [63:48] Register */ -#define CAN_MB00_LENGTH 0xFFC02C10 /* Mailbox 0 Data Length Code Register */ -#define CAN_MB00_TIMESTAMP 0xFFC02C14 /* Mailbox 0 Time Stamp Value Register */ -#define CAN_MB00_ID0 0xFFC02C18 /* Mailbox 0 Identifier Low Register */ -#define CAN_MB00_ID1 0xFFC02C1C /* Mailbox 0 Identifier High Register */ -#define CAN_MB01_DATA0 0xFFC02C20 /* Mailbox 1 Data Word 0 [15:0] Register */ -#define CAN_MB01_DATA1 0xFFC02C24 /* Mailbox 1 Data Word 1 [31:16] Register */ -#define CAN_MB01_DATA2 0xFFC02C28 /* Mailbox 1 Data Word 2 [47:32] Register */ -#define CAN_MB01_DATA3 0xFFC02C2C /* Mailbox 1 Data Word 3 [63:48] Register */ -#define CAN_MB01_LENGTH 0xFFC02C30 /* Mailbox 1 Data Length Code Register */ -#define CAN_MB01_TIMESTAMP 0xFFC02C34 /* Mailbox 1 Time Stamp Value Register */ -#define CAN_MB01_ID0 0xFFC02C38 /* Mailbox 1 Identifier Low Register */ -#define CAN_MB01_ID1 0xFFC02C3C /* Mailbox 1 Identifier High Register */ -#define CAN_MB02_DATA0 0xFFC02C40 /* Mailbox 2 Data Word 0 [15:0] Register */ -#define CAN_MB02_DATA1 0xFFC02C44 /* Mailbox 2 Data Word 1 [31:16] Register */ -#define CAN_MB02_DATA2 0xFFC02C48 /* Mailbox 2 Data Word 2 [47:32] Register */ -#define CAN_MB02_DATA3 0xFFC02C4C /* Mailbox 2 Data Word 3 [63:48] Register */ -#define CAN_MB02_LENGTH 0xFFC02C50 /* Mailbox 2 Data Length Code Register */ -#define CAN_MB02_TIMESTAMP 0xFFC02C54 /* Mailbox 2 Time Stamp Value Register */ -#define CAN_MB02_ID0 0xFFC02C58 /* Mailbox 2 Identifier Low Register */ -#define CAN_MB02_ID1 0xFFC02C5C /* Mailbox 2 Identifier High Register */ -#define CAN_MB03_DATA0 0xFFC02C60 /* Mailbox 3 Data Word 0 [15:0] Register */ -#define CAN_MB03_DATA1 0xFFC02C64 /* Mailbox 3 Data Word 1 [31:16] Register */ -#define CAN_MB03_DATA2 0xFFC02C68 /* Mailbox 3 Data Word 2 [47:32] Register */ -#define CAN_MB03_DATA3 0xFFC02C6C /* Mailbox 3 Data Word 3 [63:48] Register */ -#define CAN_MB03_LENGTH 0xFFC02C70 /* Mailbox 3 Data Length Code Register */ -#define CAN_MB03_TIMESTAMP 0xFFC02C74 /* Mailbox 3 Time Stamp Value Register */ -#define CAN_MB03_ID0 0xFFC02C78 /* Mailbox 3 Identifier Low Register */ -#define CAN_MB03_ID1 0xFFC02C7C /* Mailbox 3 Identifier High Register */ -#define CAN_MB04_DATA0 0xFFC02C80 /* Mailbox 4 Data Word 0 [15:0] Register */ -#define CAN_MB04_DATA1 0xFFC02C84 /* Mailbox 4 Data Word 1 [31:16] Register */ -#define CAN_MB04_DATA2 0xFFC02C88 /* Mailbox 4 Data Word 2 [47:32] Register */ -#define CAN_MB04_DATA3 0xFFC02C8C /* Mailbox 4 Data Word 3 [63:48] Register */ -#define CAN_MB04_LENGTH 0xFFC02C90 /* Mailbox 4 Data Length Code Register */ -#define CAN_MB04_TIMESTAMP 0xFFC02C94 /* Mailbox 4 Time Stamp Value Register */ -#define CAN_MB04_ID0 0xFFC02C98 /* Mailbox 4 Identifier Low Register */ -#define CAN_MB04_ID1 0xFFC02C9C /* Mailbox 4 Identifier High Register */ -#define CAN_MB05_DATA0 0xFFC02CA0 /* Mailbox 5 Data Word 0 [15:0] Register */ -#define CAN_MB05_DATA1 0xFFC02CA4 /* Mailbox 5 Data Word 1 [31:16] Register */ -#define CAN_MB05_DATA2 0xFFC02CA8 /* Mailbox 5 Data Word 2 [47:32] Register */ -#define CAN_MB05_DATA3 0xFFC02CAC /* Mailbox 5 Data Word 3 [63:48] Register */ -#define CAN_MB05_LENGTH 0xFFC02CB0 /* Mailbox 5 Data Length Code Register */ -#define CAN_MB05_TIMESTAMP 0xFFC02CB4 /* Mailbox 5 Time Stamp Value Register */ -#define CAN_MB05_ID0 0xFFC02CB8 /* Mailbox 5 Identifier Low Register */ -#define CAN_MB05_ID1 0xFFC02CBC /* Mailbox 5 Identifier High Register */ -#define CAN_MB06_DATA0 0xFFC02CC0 /* Mailbox 6 Data Word 0 [15:0] Register */ -#define CAN_MB06_DATA1 0xFFC02CC4 /* Mailbox 6 Data Word 1 [31:16] Register */ -#define CAN_MB06_DATA2 0xFFC02CC8 /* Mailbox 6 Data Word 2 [47:32] Register */ -#define CAN_MB06_DATA3 0xFFC02CCC /* Mailbox 6 Data Word 3 [63:48] Register */ -#define CAN_MB06_LENGTH 0xFFC02CD0 /* Mailbox 6 Data Length Code Register */ -#define CAN_MB06_TIMESTAMP 0xFFC02CD4 /* Mailbox 6 Time Stamp Value Register */ -#define CAN_MB06_ID0 0xFFC02CD8 /* Mailbox 6 Identifier Low Register */ -#define CAN_MB06_ID1 0xFFC02CDC /* Mailbox 6 Identifier High Register */ -#define CAN_MB07_DATA0 0xFFC02CE0 /* Mailbox 7 Data Word 0 [15:0] Register */ -#define CAN_MB07_DATA1 0xFFC02CE4 /* Mailbox 7 Data Word 1 [31:16] Register */ -#define CAN_MB07_DATA2 0xFFC02CE8 /* Mailbox 7 Data Word 2 [47:32] Register */ -#define CAN_MB07_DATA3 0xFFC02CEC /* Mailbox 7 Data Word 3 [63:48] Register */ -#define CAN_MB07_LENGTH 0xFFC02CF0 /* Mailbox 7 Data Length Code Register */ -#define CAN_MB07_TIMESTAMP 0xFFC02CF4 /* Mailbox 7 Time Stamp Value Register */ -#define CAN_MB07_ID0 0xFFC02CF8 /* Mailbox 7 Identifier Low Register */ -#define CAN_MB07_ID1 0xFFC02CFC /* Mailbox 7 Identifier High Register */ -#define CAN_MB08_DATA0 0xFFC02D00 /* Mailbox 8 Data Word 0 [15:0] Register */ -#define CAN_MB08_DATA1 0xFFC02D04 /* Mailbox 8 Data Word 1 [31:16] Register */ -#define CAN_MB08_DATA2 0xFFC02D08 /* Mailbox 8 Data Word 2 [47:32] Register */ -#define CAN_MB08_DATA3 0xFFC02D0C /* Mailbox 8 Data Word 3 [63:48] Register */ -#define CAN_MB08_LENGTH 0xFFC02D10 /* Mailbox 8 Data Length Code Register */ -#define CAN_MB08_TIMESTAMP 0xFFC02D14 /* Mailbox 8 Time Stamp Value Register */ -#define CAN_MB08_ID0 0xFFC02D18 /* Mailbox 8 Identifier Low Register */ -#define CAN_MB08_ID1 0xFFC02D1C /* Mailbox 8 Identifier High Register */ -#define CAN_MB09_DATA0 0xFFC02D20 /* Mailbox 9 Data Word 0 [15:0] Register */ -#define CAN_MB09_DATA1 0xFFC02D24 /* Mailbox 9 Data Word 1 [31:16] Register */ -#define CAN_MB09_DATA2 0xFFC02D28 /* Mailbox 9 Data Word 2 [47:32] Register */ -#define CAN_MB09_DATA3 0xFFC02D2C /* Mailbox 9 Data Word 3 [63:48] Register */ -#define CAN_MB09_LENGTH 0xFFC02D30 /* Mailbox 9 Data Length Code Register */ -#define CAN_MB09_TIMESTAMP 0xFFC02D34 /* Mailbox 9 Time Stamp Value Register */ -#define CAN_MB09_ID0 0xFFC02D38 /* Mailbox 9 Identifier Low Register */ -#define CAN_MB09_ID1 0xFFC02D3C /* Mailbox 9 Identifier High Register */ -#define CAN_MB10_DATA0 0xFFC02D40 /* Mailbox 10 Data Word 0 [15:0] Register */ -#define CAN_MB10_DATA1 0xFFC02D44 /* Mailbox 10 Data Word 1 [31:16] Register */ -#define CAN_MB10_DATA2 0xFFC02D48 /* Mailbox 10 Data Word 2 [47:32] Register */ -#define CAN_MB10_DATA3 0xFFC02D4C /* Mailbox 10 Data Word 3 [63:48] Register */ -#define CAN_MB10_LENGTH 0xFFC02D50 /* Mailbox 10 Data Length Code Register */ -#define CAN_MB10_TIMESTAMP 0xFFC02D54 /* Mailbox 10 Time Stamp Value Register */ -#define CAN_MB10_ID0 0xFFC02D58 /* Mailbox 10 Identifier Low Register */ -#define CAN_MB10_ID1 0xFFC02D5C /* Mailbox 10 Identifier High Register */ -#define CAN_MB11_DATA0 0xFFC02D60 /* Mailbox 11 Data Word 0 [15:0] Register */ -#define CAN_MB11_DATA1 0xFFC02D64 /* Mailbox 11 Data Word 1 [31:16] Register */ -#define CAN_MB11_DATA2 0xFFC02D68 /* Mailbox 11 Data Word 2 [47:32] Register */ -#define CAN_MB11_DATA3 0xFFC02D6C /* Mailbox 11 Data Word 3 [63:48] Register */ -#define CAN_MB11_LENGTH 0xFFC02D70 /* Mailbox 11 Data Length Code Register */ -#define CAN_MB11_TIMESTAMP 0xFFC02D74 /* Mailbox 11 Time Stamp Value Register */ -#define CAN_MB11_ID0 0xFFC02D78 /* Mailbox 11 Identifier Low Register */ -#define CAN_MB11_ID1 0xFFC02D7C /* Mailbox 11 Identifier High Register */ -#define CAN_MB12_DATA0 0xFFC02D80 /* Mailbox 12 Data Word 0 [15:0] Register */ -#define CAN_MB12_DATA1 0xFFC02D84 /* Mailbox 12 Data Word 1 [31:16] Register */ -#define CAN_MB12_DATA2 0xFFC02D88 /* Mailbox 12 Data Word 2 [47:32] Register */ -#define CAN_MB12_DATA3 0xFFC02D8C /* Mailbox 12 Data Word 3 [63:48] Register */ -#define CAN_MB12_LENGTH 0xFFC02D90 /* Mailbox 12 Data Length Code Register */ -#define CAN_MB12_TIMESTAMP 0xFFC02D94 /* Mailbox 12 Time Stamp Value Register */ -#define CAN_MB12_ID0 0xFFC02D98 /* Mailbox 12 Identifier Low Register */ -#define CAN_MB12_ID1 0xFFC02D9C /* Mailbox 12 Identifier High Register */ -#define CAN_MB13_DATA0 0xFFC02DA0 /* Mailbox 13 Data Word 0 [15:0] Register */ -#define CAN_MB13_DATA1 0xFFC02DA4 /* Mailbox 13 Data Word 1 [31:16] Register */ -#define CAN_MB13_DATA2 0xFFC02DA8 /* Mailbox 13 Data Word 2 [47:32] Register */ -#define CAN_MB13_DATA3 0xFFC02DAC /* Mailbox 13 Data Word 3 [63:48] Register */ -#define CAN_MB13_LENGTH 0xFFC02DB0 /* Mailbox 13 Data Length Code Register */ -#define CAN_MB13_TIMESTAMP 0xFFC02DB4 /* Mailbox 13 Time Stamp Value Register */ -#define CAN_MB13_ID0 0xFFC02DB8 /* Mailbox 13 Identifier Low Register */ -#define CAN_MB13_ID1 0xFFC02DBC /* Mailbox 13 Identifier High Register */ -#define CAN_MB14_DATA0 0xFFC02DC0 /* Mailbox 14 Data Word 0 [15:0] Register */ -#define CAN_MB14_DATA1 0xFFC02DC4 /* Mailbox 14 Data Word 1 [31:16] Register */ -#define CAN_MB14_DATA2 0xFFC02DC8 /* Mailbox 14 Data Word 2 [47:32] Register */ -#define CAN_MB14_DATA3 0xFFC02DCC /* Mailbox 14 Data Word 3 [63:48] Register */ -#define CAN_MB14_LENGTH 0xFFC02DD0 /* Mailbox 14 Data Length Code Register */ -#define CAN_MB14_TIMESTAMP 0xFFC02DD4 /* Mailbox 14 Time Stamp Value Register */ -#define CAN_MB14_ID0 0xFFC02DD8 /* Mailbox 14 Identifier Low Register */ -#define CAN_MB14_ID1 0xFFC02DDC /* Mailbox 14 Identifier High Register */ -#define CAN_MB15_DATA0 0xFFC02DE0 /* Mailbox 15 Data Word 0 [15:0] Register */ -#define CAN_MB15_DATA1 0xFFC02DE4 /* Mailbox 15 Data Word 1 [31:16] Register */ -#define CAN_MB15_DATA2 0xFFC02DE8 /* Mailbox 15 Data Word 2 [47:32] Register */ -#define CAN_MB15_DATA3 0xFFC02DEC /* Mailbox 15 Data Word 3 [63:48] Register */ -#define CAN_MB15_LENGTH 0xFFC02DF0 /* Mailbox 15 Data Length Code Register */ -#define CAN_MB15_TIMESTAMP 0xFFC02DF4 /* Mailbox 15 Time Stamp Value Register */ -#define CAN_MB15_ID0 0xFFC02DF8 /* Mailbox 15 Identifier Low Register */ -#define CAN_MB15_ID1 0xFFC02DFC /* Mailbox 15 Identifier High Register */ -#define CAN_MB16_DATA0 0xFFC02E00 /* Mailbox 16 Data Word 0 [15:0] Register */ -#define CAN_MB16_DATA1 0xFFC02E04 /* Mailbox 16 Data Word 1 [31:16] Register */ -#define CAN_MB16_DATA2 0xFFC02E08 /* Mailbox 16 Data Word 2 [47:32] Register */ -#define CAN_MB16_DATA3 0xFFC02E0C /* Mailbox 16 Data Word 3 [63:48] Register */ -#define CAN_MB16_LENGTH 0xFFC02E10 /* Mailbox 16 Data Length Code Register */ -#define CAN_MB16_TIMESTAMP 0xFFC02E14 /* Mailbox 16 Time Stamp Value Register */ -#define CAN_MB16_ID0 0xFFC02E18 /* Mailbox 16 Identifier Low Register */ -#define CAN_MB16_ID1 0xFFC02E1C /* Mailbox 16 Identifier High Register */ -#define CAN_MB17_DATA0 0xFFC02E20 /* Mailbox 17 Data Word 0 [15:0] Register */ -#define CAN_MB17_DATA1 0xFFC02E24 /* Mailbox 17 Data Word 1 [31:16] Register */ -#define CAN_MB17_DATA2 0xFFC02E28 /* Mailbox 17 Data Word 2 [47:32] Register */ -#define CAN_MB17_DATA3 0xFFC02E2C /* Mailbox 17 Data Word 3 [63:48] Register */ -#define CAN_MB17_LENGTH 0xFFC02E30 /* Mailbox 17 Data Length Code Register */ -#define CAN_MB17_TIMESTAMP 0xFFC02E34 /* Mailbox 17 Time Stamp Value Register */ -#define CAN_MB17_ID0 0xFFC02E38 /* Mailbox 17 Identifier Low Register */ -#define CAN_MB17_ID1 0xFFC02E3C /* Mailbox 17 Identifier High Register */ -#define CAN_MB18_DATA0 0xFFC02E40 /* Mailbox 18 Data Word 0 [15:0] Register */ -#define CAN_MB18_DATA1 0xFFC02E44 /* Mailbox 18 Data Word 1 [31:16] Register */ -#define CAN_MB18_DATA2 0xFFC02E48 /* Mailbox 18 Data Word 2 [47:32] Register */ -#define CAN_MB18_DATA3 0xFFC02E4C /* Mailbox 18 Data Word 3 [63:48] Register */ -#define CAN_MB18_LENGTH 0xFFC02E50 /* Mailbox 18 Data Length Code Register */ -#define CAN_MB18_TIMESTAMP 0xFFC02E54 /* Mailbox 18 Time Stamp Value Register */ -#define CAN_MB18_ID0 0xFFC02E58 /* Mailbox 18 Identifier Low Register */ -#define CAN_MB18_ID1 0xFFC02E5C /* Mailbox 18 Identifier High Register */ -#define CAN_MB19_DATA0 0xFFC02E60 /* Mailbox 19 Data Word 0 [15:0] Register */ -#define CAN_MB19_DATA1 0xFFC02E64 /* Mailbox 19 Data Word 1 [31:16] Register */ -#define CAN_MB19_DATA2 0xFFC02E68 /* Mailbox 19 Data Word 2 [47:32] Register */ -#define CAN_MB19_DATA3 0xFFC02E6C /* Mailbox 19 Data Word 3 [63:48] Register */ -#define CAN_MB19_LENGTH 0xFFC02E70 /* Mailbox 19 Data Length Code Register */ -#define CAN_MB19_TIMESTAMP 0xFFC02E74 /* Mailbox 19 Time Stamp Value Register */ -#define CAN_MB19_ID0 0xFFC02E78 /* Mailbox 19 Identifier Low Register */ -#define CAN_MB19_ID1 0xFFC02E7C /* Mailbox 19 Identifier High Register */ -#define CAN_MB20_DATA0 0xFFC02E80 /* Mailbox 20 Data Word 0 [15:0] Register */ -#define CAN_MB20_DATA1 0xFFC02E84 /* Mailbox 20 Data Word 1 [31:16] Register */ -#define CAN_MB20_DATA2 0xFFC02E88 /* Mailbox 20 Data Word 2 [47:32] Register */ -#define CAN_MB20_DATA3 0xFFC02E8C /* Mailbox 20 Data Word 3 [63:48] Register */ -#define CAN_MB20_LENGTH 0xFFC02E90 /* Mailbox 20 Data Length Code Register */ -#define CAN_MB20_TIMESTAMP 0xFFC02E94 /* Mailbox 20 Time Stamp Value Register */ -#define CAN_MB20_ID0 0xFFC02E98 /* Mailbox 20 Identifier Low Register */ -#define CAN_MB20_ID1 0xFFC02E9C /* Mailbox 20 Identifier High Register */ -#define CAN_MB21_DATA0 0xFFC02EA0 /* Mailbox 21 Data Word 0 [15:0] Register */ -#define CAN_MB21_DATA1 0xFFC02EA4 /* Mailbox 21 Data Word 1 [31:16] Register */ -#define CAN_MB21_DATA2 0xFFC02EA8 /* Mailbox 21 Data Word 2 [47:32] Register */ -#define CAN_MB21_DATA3 0xFFC02EAC /* Mailbox 21 Data Word 3 [63:48] Register */ -#define CAN_MB21_LENGTH 0xFFC02EB0 /* Mailbox 21 Data Length Code Register */ -#define CAN_MB21_TIMESTAMP 0xFFC02EB4 /* Mailbox 21 Time Stamp Value Register */ -#define CAN_MB21_ID0 0xFFC02EB8 /* Mailbox 21 Identifier Low Register */ -#define CAN_MB21_ID1 0xFFC02EBC /* Mailbox 21 Identifier High Register */ -#define CAN_MB22_DATA0 0xFFC02EC0 /* Mailbox 22 Data Word 0 [15:0] Register */ -#define CAN_MB22_DATA1 0xFFC02EC4 /* Mailbox 22 Data Word 1 [31:16] Register */ -#define CAN_MB22_DATA2 0xFFC02EC8 /* Mailbox 22 Data Word 2 [47:32] Register */ -#define CAN_MB22_DATA3 0xFFC02ECC /* Mailbox 22 Data Word 3 [63:48] Register */ -#define CAN_MB22_LENGTH 0xFFC02ED0 /* Mailbox 22 Data Length Code Register */ -#define CAN_MB22_TIMESTAMP 0xFFC02ED4 /* Mailbox 22 Time Stamp Value Register */ -#define CAN_MB22_ID0 0xFFC02ED8 /* Mailbox 22 Identifier Low Register */ -#define CAN_MB22_ID1 0xFFC02EDC /* Mailbox 22 Identifier High Register */ -#define CAN_MB23_DATA0 0xFFC02EE0 /* Mailbox 23 Data Word 0 [15:0] Register */ -#define CAN_MB23_DATA1 0xFFC02EE4 /* Mailbox 23 Data Word 1 [31:16] Register */ -#define CAN_MB23_DATA2 0xFFC02EE8 /* Mailbox 23 Data Word 2 [47:32] Register */ -#define CAN_MB23_DATA3 0xFFC02EEC /* Mailbox 23 Data Word 3 [63:48] Register */ -#define CAN_MB23_LENGTH 0xFFC02EF0 /* Mailbox 23 Data Length Code Register */ -#define CAN_MB23_TIMESTAMP 0xFFC02EF4 /* Mailbox 23 Time Stamp Value Register */ -#define CAN_MB23_ID0 0xFFC02EF8 /* Mailbox 23 Identifier Low Register */ -#define CAN_MB23_ID1 0xFFC02EFC /* Mailbox 23 Identifier High Register */ -#define CAN_MB24_DATA0 0xFFC02F00 /* Mailbox 24 Data Word 0 [15:0] Register */ -#define CAN_MB24_DATA1 0xFFC02F04 /* Mailbox 24 Data Word 1 [31:16] Register */ -#define CAN_MB24_DATA2 0xFFC02F08 /* Mailbox 24 Data Word 2 [47:32] Register */ -#define CAN_MB24_DATA3 0xFFC02F0C /* Mailbox 24 Data Word 3 [63:48] Register */ -#define CAN_MB24_LENGTH 0xFFC02F10 /* Mailbox 24 Data Length Code Register */ -#define CAN_MB24_TIMESTAMP 0xFFC02F14 /* Mailbox 24 Time Stamp Value Register */ -#define CAN_MB24_ID0 0xFFC02F18 /* Mailbox 24 Identifier Low Register */ -#define CAN_MB24_ID1 0xFFC02F1C /* Mailbox 24 Identifier High Register */ -#define CAN_MB25_DATA0 0xFFC02F20 /* Mailbox 25 Data Word 0 [15:0] Register */ -#define CAN_MB25_DATA1 0xFFC02F24 /* Mailbox 25 Data Word 1 [31:16] Register */ -#define CAN_MB25_DATA2 0xFFC02F28 /* Mailbox 25 Data Word 2 [47:32] Register */ -#define CAN_MB25_DATA3 0xFFC02F2C /* Mailbox 25 Data Word 3 [63:48] Register */ -#define CAN_MB25_LENGTH 0xFFC02F30 /* Mailbox 25 Data Length Code Register */ -#define CAN_MB25_TIMESTAMP 0xFFC02F34 /* Mailbox 25 Time Stamp Value Register */ -#define CAN_MB25_ID0 0xFFC02F38 /* Mailbox 25 Identifier Low Register */ -#define CAN_MB25_ID1 0xFFC02F3C /* Mailbox 25 Identifier High Register */ -#define CAN_MB26_DATA0 0xFFC02F40 /* Mailbox 26 Data Word 0 [15:0] Register */ -#define CAN_MB26_DATA1 0xFFC02F44 /* Mailbox 26 Data Word 1 [31:16] Register */ -#define CAN_MB26_DATA2 0xFFC02F48 /* Mailbox 26 Data Word 2 [47:32] Register */ -#define CAN_MB26_DATA3 0xFFC02F4C /* Mailbox 26 Data Word 3 [63:48] Register */ -#define CAN_MB26_LENGTH 0xFFC02F50 /* Mailbox 26 Data Length Code Register */ -#define CAN_MB26_TIMESTAMP 0xFFC02F54 /* Mailbox 26 Time Stamp Value Register */ -#define CAN_MB26_ID0 0xFFC02F58 /* Mailbox 26 Identifier Low Register */ -#define CAN_MB26_ID1 0xFFC02F5C /* Mailbox 26 Identifier High Register */ -#define CAN_MB27_DATA0 0xFFC02F60 /* Mailbox 27 Data Word 0 [15:0] Register */ -#define CAN_MB27_DATA1 0xFFC02F64 /* Mailbox 27 Data Word 1 [31:16] Register */ -#define CAN_MB27_DATA2 0xFFC02F68 /* Mailbox 27 Data Word 2 [47:32] Register */ -#define CAN_MB27_DATA3 0xFFC02F6C /* Mailbox 27 Data Word 3 [63:48] Register */ -#define CAN_MB27_LENGTH 0xFFC02F70 /* Mailbox 27 Data Length Code Register */ -#define CAN_MB27_TIMESTAMP 0xFFC02F74 /* Mailbox 27 Time Stamp Value Register */ -#define CAN_MB27_ID0 0xFFC02F78 /* Mailbox 27 Identifier Low Register */ -#define CAN_MB27_ID1 0xFFC02F7C /* Mailbox 27 Identifier High Register */ -#define CAN_MB28_DATA0 0xFFC02F80 /* Mailbox 28 Data Word 0 [15:0] Register */ -#define CAN_MB28_DATA1 0xFFC02F84 /* Mailbox 28 Data Word 1 [31:16] Register */ -#define CAN_MB28_DATA2 0xFFC02F88 /* Mailbox 28 Data Word 2 [47:32] Register */ -#define CAN_MB28_DATA3 0xFFC02F8C /* Mailbox 28 Data Word 3 [63:48] Register */ -#define CAN_MB28_LENGTH 0xFFC02F90 /* Mailbox 28 Data Length Code Register */ -#define CAN_MB28_TIMESTAMP 0xFFC02F94 /* Mailbox 28 Time Stamp Value Register */ -#define CAN_MB28_ID0 0xFFC02F98 /* Mailbox 28 Identifier Low Register */ -#define CAN_MB28_ID1 0xFFC02F9C /* Mailbox 28 Identifier High Register */ -#define CAN_MB29_DATA0 0xFFC02FA0 /* Mailbox 29 Data Word 0 [15:0] Register */ -#define CAN_MB29_DATA1 0xFFC02FA4 /* Mailbox 29 Data Word 1 [31:16] Register */ -#define CAN_MB29_DATA2 0xFFC02FA8 /* Mailbox 29 Data Word 2 [47:32] Register */ -#define CAN_MB29_DATA3 0xFFC02FAC /* Mailbox 29 Data Word 3 [63:48] Register */ -#define CAN_MB29_LENGTH 0xFFC02FB0 /* Mailbox 29 Data Length Code Register */ -#define CAN_MB29_TIMESTAMP 0xFFC02FB4 /* Mailbox 29 Time Stamp Value Register */ -#define CAN_MB29_ID0 0xFFC02FB8 /* Mailbox 29 Identifier Low Register */ -#define CAN_MB29_ID1 0xFFC02FBC /* Mailbox 29 Identifier High Register */ -#define CAN_MB30_DATA0 0xFFC02FC0 /* Mailbox 30 Data Word 0 [15:0] Register */ -#define CAN_MB30_DATA1 0xFFC02FC4 /* Mailbox 30 Data Word 1 [31:16] Register */ -#define CAN_MB30_DATA2 0xFFC02FC8 /* Mailbox 30 Data Word 2 [47:32] Register */ -#define CAN_MB30_DATA3 0xFFC02FCC /* Mailbox 30 Data Word 3 [63:48] Register */ -#define CAN_MB30_LENGTH 0xFFC02FD0 /* Mailbox 30 Data Length Code Register */ -#define CAN_MB30_TIMESTAMP 0xFFC02FD4 /* Mailbox 30 Time Stamp Value Register */ -#define CAN_MB30_ID0 0xFFC02FD8 /* Mailbox 30 Identifier Low Register */ -#define CAN_MB30_ID1 0xFFC02FDC /* Mailbox 30 Identifier High Register */ -#define CAN_MB31_DATA0 0xFFC02FE0 /* Mailbox 31 Data Word 0 [15:0] Register */ -#define CAN_MB31_DATA1 0xFFC02FE4 /* Mailbox 31 Data Word 1 [31:16] Register */ -#define CAN_MB31_DATA2 0xFFC02FE8 /* Mailbox 31 Data Word 2 [47:32] Register */ -#define CAN_MB31_DATA3 0xFFC02FEC /* Mailbox 31 Data Word 3 [63:48] Register */ -#define CAN_MB31_LENGTH 0xFFC02FF0 /* Mailbox 31 Data Length Code Register */ -#define CAN_MB31_TIMESTAMP 0xFFC02FF4 /* Mailbox 31 Time Stamp Value Register */ -#define CAN_MB31_ID0 0xFFC02FF8 /* Mailbox 31 Identifier Low Register */ -#define CAN_MB31_ID1 0xFFC02FFC /* Mailbox 31 Identifier High Register */ -#define PORTF_FER 0xFFC03200 /* Port F Function Enable Register (Alternate/Flag*) */ -#define PORTG_FER 0xFFC03204 /* Port G Function Enable Register (Alternate/Flag*) */ -#define PORTH_FER 0xFFC03208 /* Port H Function Enable Register (Alternate/Flag*) */ -#define PORT_MUX 0xFFC0320C /* Port Multiplexer Control Register */ -#define HMDMA0_CONTROL 0xFFC03300 /* Handshake MDMA0 Control Register */ -#define HMDMA0_ECINIT 0xFFC03304 /* HMDMA0 Initial Edge Count Register */ -#define HMDMA0_BCINIT 0xFFC03308 /* HMDMA0 Initial Block Count Register */ -#define HMDMA0_ECURGENT 0xFFC0330C /* HMDMA0 Urgent Edge Count Threshhold Register */ -#define HMDMA0_ECOVERFLOW 0xFFC03310 /* HMDMA0 Edge Count Overflow Interrupt Register */ -#define HMDMA0_ECOUNT 0xFFC03314 /* HMDMA0 Current Edge Count Register */ -#define HMDMA0_BCOUNT 0xFFC03318 /* HMDMA0 Current Block Count Register */ -#define HMDMA1_CONTROL 0xFFC03340 /* Handshake MDMA1 Control Register */ -#define HMDMA1_ECINIT 0xFFC03344 /* HMDMA1 Initial Edge Count Register */ -#define HMDMA1_BCINIT 0xFFC03348 /* HMDMA1 Initial Block Count Register */ -#define HMDMA1_ECURGENT 0xFFC0334C /* HMDMA1 Urgent Edge Count Threshhold Register */ -#define HMDMA1_ECOVERFLOW 0xFFC03350 /* HMDMA1 Edge Count Overflow Interrupt Register */ -#define HMDMA1_ECOUNT 0xFFC03354 /* HMDMA1 Current Edge Count Register */ -#define HMDMA1_BCOUNT 0xFFC03358 /* HMDMA1 Current Block Count Register */ -#define CHIPID 0xFFC00014 -#define DMA_TC_CNT 0xFFC00B0C -#define DMA_TC_PER 0xFFC00B10 - -#endif /* __BFIN_DEF_ADSP_EDN_BF534_extended__ */ diff --git a/arch/blackfin/include/asm/mach-bf537/BF534_cdef.h b/arch/blackfin/include/asm/mach-bf537/BF534_cdef.h index 27842cc..3d9412d 100644 --- a/arch/blackfin/include/asm/mach-bf537/BF534_cdef.h +++ b/arch/blackfin/include/asm/mach-bf537/BF534_cdef.h @@ -8,7 +8,1617 @@ #include "../mach-common/ADSP-EDN-core_cdef.h" -#include "ADSP-EDN-BF534-extended_cdef.h" - +#define bfin_read_PLL_CTL() bfin_read16(PLL_CTL) +#define bfin_write_PLL_CTL(val) bfin_write16(PLL_CTL, val) +#define bfin_read_PLL_DIV() bfin_read16(PLL_DIV) +#define bfin_write_PLL_DIV(val) bfin_write16(PLL_DIV, val) +#define bfin_read_VR_CTL() bfin_read16(VR_CTL) +#define bfin_write_VR_CTL(val) bfin_write16(VR_CTL, val) +#define bfin_read_PLL_STAT() bfin_read16(PLL_STAT) +#define bfin_write_PLL_STAT(val) bfin_write16(PLL_STAT, val) +#define bfin_read_PLL_LOCKCNT() bfin_read16(PLL_LOCKCNT) +#define bfin_write_PLL_LOCKCNT(val) bfin_write16(PLL_LOCKCNT, val) +#define bfin_read_SWRST() bfin_read16(SWRST) +#define bfin_write_SWRST(val) bfin_write16(SWRST, val) +#define bfin_read_SYSCR() bfin_read16(SYSCR) +#define bfin_write_SYSCR(val) bfin_write16(SYSCR, val) +#define bfin_read_SIC_RVECT() bfin_read16(SIC_RVECT) +#define bfin_write_SIC_RVECT(val) bfin_write16(SIC_RVECT, val) +#define bfin_read_SIC_IMASK() bfin_read32(SIC_IMASK) +#define bfin_write_SIC_IMASK(val) bfin_write32(SIC_IMASK, val) +#define bfin_read_SIC_IAR0() bfin_read32(SIC_IAR0) +#define bfin_write_SIC_IAR0(val) bfin_write32(SIC_IAR0, val) +#define bfin_read_SIC_IAR1() bfin_read32(SIC_IAR1) +#define bfin_write_SIC_IAR1(val) bfin_write32(SIC_IAR1, val) +#define bfin_read_SIC_IAR2() bfin_read32(SIC_IAR2) +#define bfin_write_SIC_IAR2(val) bfin_write32(SIC_IAR2, val) +#define bfin_read_SIC_IAR3() bfin_read32(SIC_IAR3) +#define bfin_write_SIC_IAR3(val) bfin_write32(SIC_IAR3, val) +#define bfin_read_SIC_ISR() bfin_read32(SIC_ISR) +#define bfin_write_SIC_ISR(val) bfin_write32(SIC_ISR, val) +#define bfin_read_SIC_IWR() bfin_read32(SIC_IWR) +#define bfin_write_SIC_IWR(val) bfin_write32(SIC_IWR, val) +#define bfin_read_WDOG_CTL() bfin_read16(WDOG_CTL) +#define bfin_write_WDOG_CTL(val) bfin_write16(WDOG_CTL, val) +#define bfin_read_WDOG_CNT() bfin_read32(WDOG_CNT) +#define bfin_write_WDOG_CNT(val) bfin_write32(WDOG_CNT, val) +#define bfin_read_WDOG_STAT() bfin_read32(WDOG_STAT) +#define bfin_write_WDOG_STAT(val) bfin_write32(WDOG_STAT, val) +#define bfin_read_RTC_STAT() bfin_read32(RTC_STAT) +#define bfin_write_RTC_STAT(val) bfin_write32(RTC_STAT, val) +#define bfin_read_RTC_ICTL() bfin_read16(RTC_ICTL) +#define bfin_write_RTC_ICTL(val) bfin_write16(RTC_ICTL, val) +#define bfin_read_RTC_ISTAT() bfin_read16(RTC_ISTAT) +#define bfin_write_RTC_ISTAT(val) bfin_write16(RTC_ISTAT, val) +#define bfin_read_RTC_SWCNT() bfin_read16(RTC_SWCNT) +#define bfin_write_RTC_SWCNT(val) bfin_write16(RTC_SWCNT, val) +#define bfin_read_RTC_ALARM() bfin_read32(RTC_ALARM) +#define bfin_write_RTC_ALARM(val) bfin_write32(RTC_ALARM, val) +#define bfin_read_RTC_PREN() bfin_read16(RTC_PREN) +#define bfin_write_RTC_PREN(val) bfin_write16(RTC_PREN, val) +#define bfin_read_UART0_THR() bfin_read16(UART0_THR) +#define bfin_write_UART0_THR(val) bfin_write16(UART0_THR, val) +#define bfin_read_UART0_RBR() bfin_read16(UART0_RBR) +#define bfin_write_UART0_RBR(val) bfin_write16(UART0_RBR, val) +#define bfin_read_UART0_DLL() bfin_read16(UART0_DLL) +#define bfin_write_UART0_DLL(val) bfin_write16(UART0_DLL, val) +#define bfin_read_UART0_IER() bfin_read16(UART0_IER) +#define bfin_write_UART0_IER(val) bfin_write16(UART0_IER, val) +#define bfin_read_UART0_DLH() bfin_read16(UART0_DLH) +#define bfin_write_UART0_DLH(val) bfin_write16(UART0_DLH, val) +#define bfin_read_UART0_IIR() bfin_read16(UART0_IIR) +#define bfin_write_UART0_IIR(val) bfin_write16(UART0_IIR, val) +#define bfin_read_UART0_LCR() bfin_read16(UART0_LCR) +#define bfin_write_UART0_LCR(val) bfin_write16(UART0_LCR, val) +#define bfin_read_UART0_MCR() bfin_read16(UART0_MCR) +#define bfin_write_UART0_MCR(val) bfin_write16(UART0_MCR, val) +#define bfin_read_UART0_LSR() bfin_read16(UART0_LSR) +#define bfin_write_UART0_LSR(val) bfin_write16(UART0_LSR, val) +#define bfin_read_UART0_MSR() bfin_read16(UART0_MSR) +#define bfin_write_UART0_MSR(val) bfin_write16(UART0_MSR, val) +#define bfin_read_UART0_SCR() bfin_read16(UART0_SCR) +#define bfin_write_UART0_SCR(val) bfin_write16(UART0_SCR, val) +#define bfin_read_UART0_GCTL() bfin_read16(UART0_GCTL) +#define bfin_write_UART0_GCTL(val) bfin_write16(UART0_GCTL, val) +#define bfin_read_SPI_CTL() bfin_read16(SPI_CTL) +#define bfin_write_SPI_CTL(val) bfin_write16(SPI_CTL, val) +#define bfin_read_SPI_FLG() bfin_read16(SPI_FLG) +#define bfin_write_SPI_FLG(val) bfin_write16(SPI_FLG, val) +#define bfin_read_SPI_STAT() bfin_read16(SPI_STAT) +#define bfin_write_SPI_STAT(val) bfin_write16(SPI_STAT, val) +#define bfin_read_SPI_TDBR() bfin_read16(SPI_TDBR) +#define bfin_write_SPI_TDBR(val) bfin_write16(SPI_TDBR, val) +#define bfin_read_SPI_RDBR() bfin_read16(SPI_RDBR) +#define bfin_write_SPI_RDBR(val) bfin_write16(SPI_RDBR, val) +#define bfin_read_SPI_BAUD() bfin_read16(SPI_BAUD) +#define bfin_write_SPI_BAUD(val) bfin_write16(SPI_BAUD, val) +#define bfin_read_SPI_SHADOW() bfin_read16(SPI_SHADOW) +#define bfin_write_SPI_SHADOW(val) bfin_write16(SPI_SHADOW, val) +#define bfin_read_TIMER0_CONFIG() bfin_read16(TIMER0_CONFIG) +#define bfin_write_TIMER0_CONFIG(val) bfin_write16(TIMER0_CONFIG, val) +#define bfin_read_TIMER0_COUNTER() bfin_read32(TIMER0_COUNTER) +#define bfin_write_TIMER0_COUNTER(val) bfin_write32(TIMER0_COUNTER, val) +#define bfin_read_TIMER0_PERIOD() bfin_read32(TIMER0_PERIOD) +#define bfin_write_TIMER0_PERIOD(val) bfin_write32(TIMER0_PERIOD, val) +#define bfin_read_TIMER0_WIDTH() bfin_read32(TIMER0_WIDTH) +#define bfin_write_TIMER0_WIDTH(val) bfin_write32(TIMER0_WIDTH, val) +#define bfin_read_TIMER1_CONFIG() bfin_read16(TIMER1_CONFIG) +#define bfin_write_TIMER1_CONFIG(val) bfin_write16(TIMER1_CONFIG, val) +#define bfin_read_TIMER1_COUNTER() bfin_read32(TIMER1_COUNTER) +#define bfin_write_TIMER1_COUNTER(val) bfin_write32(TIMER1_COUNTER, val) +#define bfin_read_TIMER1_PERIOD() bfin_read32(TIMER1_PERIOD) +#define bfin_write_TIMER1_PERIOD(val) bfin_write32(TIMER1_PERIOD, val) +#define bfin_read_TIMER1_WIDTH() bfin_read32(TIMER1_WIDTH) +#define bfin_write_TIMER1_WIDTH(val) bfin_write32(TIMER1_WIDTH, val) +#define bfin_read_TIMER2_CONFIG() bfin_read16(TIMER2_CONFIG) +#define bfin_write_TIMER2_CONFIG(val) bfin_write16(TIMER2_CONFIG, val) +#define bfin_read_TIMER2_COUNTER() bfin_read32(TIMER2_COUNTER) +#define bfin_write_TIMER2_COUNTER(val) bfin_write32(TIMER2_COUNTER, val) +#define bfin_read_TIMER2_PERIOD() bfin_read32(TIMER2_PERIOD) +#define bfin_write_TIMER2_PERIOD(val) bfin_write32(TIMER2_PERIOD, val) +#define bfin_read_TIMER2_WIDTH() bfin_read32(TIMER2_WIDTH) +#define bfin_write_TIMER2_WIDTH(val) bfin_write32(TIMER2_WIDTH, val) +#define bfin_read_TIMER3_CONFIG() bfin_read16(TIMER3_CONFIG) +#define bfin_write_TIMER3_CONFIG(val) bfin_write16(TIMER3_CONFIG, val) +#define bfin_read_TIMER3_COUNTER() bfin_read32(TIMER3_COUNTER) +#define bfin_write_TIMER3_COUNTER(val) bfin_write32(TIMER3_COUNTER, val) +#define bfin_read_TIMER3_PERIOD() bfin_read32(TIMER3_PERIOD) +#define bfin_write_TIMER3_PERIOD(val) bfin_write32(TIMER3_PERIOD, val) +#define bfin_read_TIMER3_WIDTH() bfin_read32(TIMER3_WIDTH) +#define bfin_write_TIMER3_WIDTH(val) bfin_write32(TIMER3_WIDTH, val) +#define bfin_read_TIMER4_CONFIG() bfin_read16(TIMER4_CONFIG) +#define bfin_write_TIMER4_CONFIG(val) bfin_write16(TIMER4_CONFIG, val) +#define bfin_read_TIMER4_COUNTER() bfin_read32(TIMER4_COUNTER) +#define bfin_write_TIMER4_COUNTER(val) bfin_write32(TIMER4_COUNTER, val) +#define bfin_read_TIMER4_PERIOD() bfin_read32(TIMER4_PERIOD) +#define bfin_write_TIMER4_PERIOD(val) bfin_write32(TIMER4_PERIOD, val) +#define bfin_read_TIMER4_WIDTH() bfin_read32(TIMER4_WIDTH) +#define bfin_write_TIMER4_WIDTH(val) bfin_write32(TIMER4_WIDTH, val) +#define bfin_read_TIMER5_CONFIG() bfin_read16(TIMER5_CONFIG) +#define bfin_write_TIMER5_CONFIG(val) bfin_write16(TIMER5_CONFIG, val) +#define bfin_read_TIMER5_COUNTER() bfin_read32(TIMER5_COUNTER) +#define bfin_write_TIMER5_COUNTER(val) bfin_write32(TIMER5_COUNTER, val) +#define bfin_read_TIMER5_PERIOD() bfin_read32(TIMER5_PERIOD) +#define bfin_write_TIMER5_PERIOD(val) bfin_write32(TIMER5_PERIOD, val) +#define bfin_read_TIMER5_WIDTH() bfin_read32(TIMER5_WIDTH) +#define bfin_write_TIMER5_WIDTH(val) bfin_write32(TIMER5_WIDTH, val) +#define bfin_read_TIMER6_CONFIG() bfin_read16(TIMER6_CONFIG) +#define bfin_write_TIMER6_CONFIG(val) bfin_write16(TIMER6_CONFIG, val) +#define bfin_read_TIMER6_COUNTER() bfin_read32(TIMER6_COUNTER) +#define bfin_write_TIMER6_COUNTER(val) bfin_write32(TIMER6_COUNTER, val) +#define bfin_read_TIMER6_PERIOD() bfin_read32(TIMER6_PERIOD) +#define bfin_write_TIMER6_PERIOD(val) bfin_write32(TIMER6_PERIOD, val) +#define bfin_read_TIMER6_WIDTH() bfin_read32(TIMER6_WIDTH) +#define bfin_write_TIMER6_WIDTH(val) bfin_write32(TIMER6_WIDTH, val) +#define bfin_read_TIMER7_CONFIG() bfin_read16(TIMER7_CONFIG) +#define bfin_write_TIMER7_CONFIG(val) bfin_write16(TIMER7_CONFIG, val) +#define bfin_read_TIMER7_COUNTER() bfin_read32(TIMER7_COUNTER) +#define bfin_write_TIMER7_COUNTER(val) bfin_write32(TIMER7_COUNTER, val) +#define bfin_read_TIMER7_PERIOD() bfin_read32(TIMER7_PERIOD) +#define bfin_write_TIMER7_PERIOD(val) bfin_write32(TIMER7_PERIOD, val) +#define bfin_read_TIMER7_WIDTH() bfin_read32(TIMER7_WIDTH) +#define bfin_write_TIMER7_WIDTH(val) bfin_write32(TIMER7_WIDTH, val) +#define bfin_read_TIMER_ENABLE() bfin_read16(TIMER_ENABLE) +#define bfin_write_TIMER_ENABLE(val) bfin_write16(TIMER_ENABLE, val) +#define bfin_read_TIMER_DISABLE() bfin_read16(TIMER_DISABLE) +#define bfin_write_TIMER_DISABLE(val) bfin_write16(TIMER_DISABLE, val) +#define bfin_read_TIMER_STATUS() bfin_read32(TIMER_STATUS) +#define bfin_write_TIMER_STATUS(val) bfin_write32(TIMER_STATUS, val) +#define bfin_read_PORTFIO() bfin_read16(PORTFIO) +#define bfin_write_PORTFIO(val) bfin_write16(PORTFIO, val) +#define bfin_read_PORTFIO_CLEAR() bfin_read16(PORTFIO_CLEAR) +#define bfin_write_PORTFIO_CLEAR(val) bfin_write16(PORTFIO_CLEAR, val) +#define bfin_read_PORTFIO_SET() bfin_read16(PORTFIO_SET) +#define bfin_write_PORTFIO_SET(val) bfin_write16(PORTFIO_SET, val) +#define bfin_read_PORTFIO_TOGGLE() bfin_read16(PORTFIO_TOGGLE) +#define bfin_write_PORTFIO_TOGGLE(val) bfin_write16(PORTFIO_TOGGLE, val) +#define bfin_read_PORTFIO_MASKA() bfin_read16(PORTFIO_MASKA) +#define bfin_write_PORTFIO_MASKA(val) bfin_write16(PORTFIO_MASKA, val) +#define bfin_read_PORTFIO_MASKA_CLEAR() bfin_read16(PORTFIO_MASKA_CLEAR) +#define bfin_write_PORTFIO_MASKA_CLEAR(val) bfin_write16(PORTFIO_MASKA_CLEAR, val) +#define bfin_read_PORTFIO_MASKA_SET() bfin_read16(PORTFIO_MASKA_SET) +#define bfin_write_PORTFIO_MASKA_SET(val) bfin_write16(PORTFIO_MASKA_SET, val) +#define bfin_read_PORTFIO_MASKA_TOGGLE() bfin_read16(PORTFIO_MASKA_TOGGLE) +#define bfin_write_PORTFIO_MASKA_TOGGLE(val) bfin_write16(PORTFIO_MASKA_TOGGLE, val) +#define bfin_read_PORTFIO_MASKB() bfin_read16(PORTFIO_MASKB) +#define bfin_write_PORTFIO_MASKB(val) bfin_write16(PORTFIO_MASKB, val) +#define bfin_read_PORTFIO_MASKB_CLEAR() bfin_read16(PORTFIO_MASKB_CLEAR) +#define bfin_write_PORTFIO_MASKB_CLEAR(val) bfin_write16(PORTFIO_MASKB_CLEAR, val) +#define bfin_read_PORTFIO_MASKB_SET() bfin_read16(PORTFIO_MASKB_SET) +#define bfin_write_PORTFIO_MASKB_SET(val) bfin_write16(PORTFIO_MASKB_SET, val) +#define bfin_read_PORTFIO_MASKB_TOGGLE() bfin_read16(PORTFIO_MASKB_TOGGLE) +#define bfin_write_PORTFIO_MASKB_TOGGLE(val) bfin_write16(PORTFIO_MASKB_TOGGLE, val) +#define bfin_read_PORTFIO_DIR() bfin_read16(PORTFIO_DIR) +#define bfin_write_PORTFIO_DIR(val) bfin_write16(PORTFIO_DIR, val) +#define bfin_read_PORTFIO_POLAR() bfin_read16(PORTFIO_POLAR) +#define bfin_write_PORTFIO_POLAR(val) bfin_write16(PORTFIO_POLAR, val) +#define bfin_read_PORTFIO_EDGE() bfin_read16(PORTFIO_EDGE) +#define bfin_write_PORTFIO_EDGE(val) bfin_write16(PORTFIO_EDGE, val) +#define bfin_read_PORTFIO_BOTH() bfin_read16(PORTFIO_BOTH) +#define bfin_write_PORTFIO_BOTH(val) bfin_write16(PORTFIO_BOTH, val) +#define bfin_read_PORTFIO_INEN() bfin_read16(PORTFIO_INEN) +#define bfin_write_PORTFIO_INEN(val) bfin_write16(PORTFIO_INEN, val) +#define bfin_read_SPORT0_TCR1() bfin_read16(SPORT0_TCR1) +#define bfin_write_SPORT0_TCR1(val) bfin_write16(SPORT0_TCR1, val) +#define bfin_read_SPORT0_TCR2() bfin_read16(SPORT0_TCR2) +#define bfin_write_SPORT0_TCR2(val) bfin_write16(SPORT0_TCR2, val) +#define bfin_read_SPORT0_TCLKDIV() bfin_read16(SPORT0_TCLKDIV) +#define bfin_write_SPORT0_TCLKDIV(val) bfin_write16(SPORT0_TCLKDIV, val) +#define bfin_read_SPORT0_TFSDIV() bfin_read16(SPORT0_TFSDIV) +#define bfin_write_SPORT0_TFSDIV(val) bfin_write16(SPORT0_TFSDIV, val) +#define bfin_write_SPORT0_TX(val) bfin_write32(SPORT0_TX, val) +#define bfin_read_SPORT0_RX() bfin_read32(SPORT0_RX) +#define bfin_write_SPORT0_RX(val) bfin_write32(SPORT0_RX, val) +#define bfin_read_SPORT0_RCR1() bfin_read16(SPORT0_RCR1) +#define bfin_write_SPORT0_RCR1(val) bfin_write16(SPORT0_RCR1, val) +#define bfin_read_SPORT0_RCR2() bfin_read16(SPORT0_RCR2) +#define bfin_write_SPORT0_RCR2(val) bfin_write16(SPORT0_RCR2, val) +#define bfin_read_SPORT0_RCLKDIV() bfin_read16(SPORT0_RCLKDIV) +#define bfin_write_SPORT0_RCLKDIV(val) bfin_write16(SPORT0_RCLKDIV, val) +#define bfin_read_SPORT0_RFSDIV() bfin_read16(SPORT0_RFSDIV) +#define bfin_write_SPORT0_RFSDIV(val) bfin_write16(SPORT0_RFSDIV, val) +#define bfin_read_SPORT0_STAT() bfin_read16(SPORT0_STAT) +#define bfin_write_SPORT0_STAT(val) bfin_write16(SPORT0_STAT, val) +#define bfin_read_SPORT0_CHNL() bfin_read16(SPORT0_CHNL) +#define bfin_write_SPORT0_CHNL(val) bfin_write16(SPORT0_CHNL, val) +#define bfin_read_SPORT0_MCMC1() bfin_read16(SPORT0_MCMC1) +#define bfin_write_SPORT0_MCMC1(val) bfin_write16(SPORT0_MCMC1, val) +#define bfin_read_SPORT0_MCMC2() bfin_read16(SPORT0_MCMC2) +#define bfin_write_SPORT0_MCMC2(val) bfin_write16(SPORT0_MCMC2, val) +#define bfin_read_SPORT0_MTCS0() bfin_read32(SPORT0_MTCS0) +#define bfin_write_SPORT0_MTCS0(val) bfin_write32(SPORT0_MTCS0, val) +#define bfin_read_SPORT0_MTCS1() bfin_read32(SPORT0_MTCS1) +#define bfin_write_SPORT0_MTCS1(val) bfin_write32(SPORT0_MTCS1, val) +#define bfin_read_SPORT0_MTCS2() bfin_read32(SPORT0_MTCS2) +#define bfin_write_SPORT0_MTCS2(val) bfin_write32(SPORT0_MTCS2, val) +#define bfin_read_SPORT0_MTCS3() bfin_read32(SPORT0_MTCS3) +#define bfin_write_SPORT0_MTCS3(val) bfin_write32(SPORT0_MTCS3, val) +#define bfin_read_SPORT0_MRCS0() bfin_read32(SPORT0_MRCS0) +#define bfin_write_SPORT0_MRCS0(val) bfin_write32(SPORT0_MRCS0, val) +#define bfin_read_SPORT0_MRCS1() bfin_read32(SPORT0_MRCS1) +#define bfin_write_SPORT0_MRCS1(val) bfin_write32(SPORT0_MRCS1, val) +#define bfin_read_SPORT0_MRCS2() bfin_read32(SPORT0_MRCS2) +#define bfin_write_SPORT0_MRCS2(val) bfin_write32(SPORT0_MRCS2, val) +#define bfin_read_SPORT0_MRCS3() bfin_read32(SPORT0_MRCS3) +#define bfin_write_SPORT0_MRCS3(val) bfin_write32(SPORT0_MRCS3, val) +#define bfin_read_SPORT1_TCR1() bfin_read16(SPORT1_TCR1) +#define bfin_write_SPORT1_TCR1(val) bfin_write16(SPORT1_TCR1, val) +#define bfin_read_SPORT1_TCR2() bfin_read16(SPORT1_TCR2) +#define bfin_write_SPORT1_TCR2(val) bfin_write16(SPORT1_TCR2, val) +#define bfin_read_SPORT1_TCLKDIV() bfin_read16(SPORT1_TCLKDIV) +#define bfin_write_SPORT1_TCLKDIV(val) bfin_write16(SPORT1_TCLKDIV, val) +#define bfin_read_SPORT1_TFSDIV() bfin_read16(SPORT1_TFSDIV) +#define bfin_write_SPORT1_TFSDIV(val) bfin_write16(SPORT1_TFSDIV, val) +#define bfin_write_SPORT1_TX(val) bfin_write32(SPORT1_TX, val) +#define bfin_read_SPORT1_RX() bfin_read32(SPORT1_RX) +#define bfin_write_SPORT1_RX(val) bfin_write32(SPORT1_RX, val) +#define bfin_read_SPORT1_RCR1() bfin_read16(SPORT1_RCR1) +#define bfin_write_SPORT1_RCR1(val) bfin_write16(SPORT1_RCR1, val) +#define bfin_read_SPORT1_RCR2() bfin_read16(SPORT1_RCR2) +#define bfin_write_SPORT1_RCR2(val) bfin_write16(SPORT1_RCR2, val) +#define bfin_read_SPORT1_RCLKDIV() bfin_read16(SPORT1_RCLKDIV) +#define bfin_write_SPORT1_RCLKDIV(val) bfin_write16(SPORT1_RCLKDIV, val) +#define bfin_read_SPORT1_RFSDIV() bfin_read16(SPORT1_RFSDIV) +#define bfin_write_SPORT1_RFSDIV(val) bfin_write16(SPORT1_RFSDIV, val) +#define bfin_read_SPORT1_STAT() bfin_read16(SPORT1_STAT) +#define bfin_write_SPORT1_STAT(val) bfin_write16(SPORT1_STAT, val) +#define bfin_read_SPORT1_CHNL() bfin_read16(SPORT1_CHNL) +#define bfin_write_SPORT1_CHNL(val) bfin_write16(SPORT1_CHNL, val) +#define bfin_read_SPORT1_MCMC1() bfin_read16(SPORT1_MCMC1) +#define bfin_write_SPORT1_MCMC1(val) bfin_write16(SPORT1_MCMC1, val) +#define bfin_read_SPORT1_MCMC2() bfin_read16(SPORT1_MCMC2) +#define bfin_write_SPORT1_MCMC2(val) bfin_write16(SPORT1_MCMC2, val) +#define bfin_read_SPORT1_MTCS0() bfin_read32(SPORT1_MTCS0) +#define bfin_write_SPORT1_MTCS0(val) bfin_write32(SPORT1_MTCS0, val) +#define bfin_read_SPORT1_MTCS1() bfin_read32(SPORT1_MTCS1) +#define bfin_write_SPORT1_MTCS1(val) bfin_write32(SPORT1_MTCS1, val) +#define bfin_read_SPORT1_MTCS2() bfin_read32(SPORT1_MTCS2) +#define bfin_write_SPORT1_MTCS2(val) bfin_write32(SPORT1_MTCS2, val) +#define bfin_read_SPORT1_MTCS3() bfin_read32(SPORT1_MTCS3) +#define bfin_write_SPORT1_MTCS3(val) bfin_write32(SPORT1_MTCS3, val) +#define bfin_read_SPORT1_MRCS0() bfin_read32(SPORT1_MRCS0) +#define bfin_write_SPORT1_MRCS0(val) bfin_write32(SPORT1_MRCS0, val) +#define bfin_read_SPORT1_MRCS1() bfin_read32(SPORT1_MRCS1) +#define bfin_write_SPORT1_MRCS1(val) bfin_write32(SPORT1_MRCS1, val) +#define bfin_read_SPORT1_MRCS2() bfin_read32(SPORT1_MRCS2) +#define bfin_write_SPORT1_MRCS2(val) bfin_write32(SPORT1_MRCS2, val) +#define bfin_read_SPORT1_MRCS3() bfin_read32(SPORT1_MRCS3) +#define bfin_write_SPORT1_MRCS3(val) bfin_write32(SPORT1_MRCS3, val) +#define bfin_read_EBIU_AMGCTL() bfin_read16(EBIU_AMGCTL) +#define bfin_write_EBIU_AMGCTL(val) bfin_write16(EBIU_AMGCTL, val) +#define bfin_read_EBIU_AMBCTL0() bfin_read32(EBIU_AMBCTL0) +#define bfin_write_EBIU_AMBCTL0(val) bfin_write32(EBIU_AMBCTL0, val) +#define bfin_read_EBIU_AMBCTL1() bfin_read32(EBIU_AMBCTL1) +#define bfin_write_EBIU_AMBCTL1(val) bfin_write32(EBIU_AMBCTL1, val) +#define bfin_read_EBIU_SDGCTL() bfin_read32(EBIU_SDGCTL) +#define bfin_write_EBIU_SDGCTL(val) bfin_write32(EBIU_SDGCTL, val) +#define bfin_read_EBIU_SDBCTL() bfin_read16(EBIU_SDBCTL) +#define bfin_write_EBIU_SDBCTL(val) bfin_write16(EBIU_SDBCTL, val) +#define bfin_read_EBIU_SDRRC() bfin_read16(EBIU_SDRRC) +#define bfin_write_EBIU_SDRRC(val) bfin_write16(EBIU_SDRRC, val) +#define bfin_read_EBIU_SDSTAT() bfin_read16(EBIU_SDSTAT) +#define bfin_write_EBIU_SDSTAT(val) bfin_write16(EBIU_SDSTAT, val) +#define bfin_read_DMA0_NEXT_DESC_PTR() bfin_readPTR(DMA0_NEXT_DESC_PTR) +#define bfin_write_DMA0_NEXT_DESC_PTR(val) bfin_writePTR(DMA0_NEXT_DESC_PTR, val) +#define bfin_read_DMA0_START_ADDR() bfin_readPTR(DMA0_START_ADDR) +#define bfin_write_DMA0_START_ADDR(val) bfin_writePTR(DMA0_START_ADDR, val) +#define bfin_read_DMA0_CONFIG() bfin_read16(DMA0_CONFIG) +#define bfin_write_DMA0_CONFIG(val) bfin_write16(DMA0_CONFIG, val) +#define bfin_read_DMA0_X_COUNT() bfin_read16(DMA0_X_COUNT) +#define bfin_write_DMA0_X_COUNT(val) bfin_write16(DMA0_X_COUNT, val) +#define bfin_read_DMA0_X_MODIFY() bfin_read16(DMA0_X_MODIFY) +#define bfin_write_DMA0_X_MODIFY(val) bfin_write16(DMA0_X_MODIFY, val) +#define bfin_read_DMA0_Y_COUNT() bfin_read16(DMA0_Y_COUNT) +#define bfin_write_DMA0_Y_COUNT(val) bfin_write16(DMA0_Y_COUNT, val) +#define bfin_read_DMA0_Y_MODIFY() bfin_read16(DMA0_Y_MODIFY) +#define bfin_write_DMA0_Y_MODIFY(val) bfin_write16(DMA0_Y_MODIFY, val) +#define bfin_read_DMA0_CURR_DESC_PTR() bfin_readPTR(DMA0_CURR_DESC_PTR) +#define bfin_write_DMA0_CURR_DESC_PTR(val) bfin_writePTR(DMA0_CURR_DESC_PTR, val) +#define bfin_read_DMA0_CURR_ADDR() bfin_readPTR(DMA0_CURR_ADDR) +#define bfin_write_DMA0_CURR_ADDR(val) bfin_writePTR(DMA0_CURR_ADDR, val) +#define bfin_read_DMA0_IRQ_STATUS() bfin_read16(DMA0_IRQ_STATUS) +#define bfin_write_DMA0_IRQ_STATUS(val) bfin_write16(DMA0_IRQ_STATUS, val) +#define bfin_read_DMA0_PERIPHERAL_MAP() bfin_read16(DMA0_PERIPHERAL_MAP) +#define bfin_write_DMA0_PERIPHERAL_MAP(val) bfin_write16(DMA0_PERIPHERAL_MAP, val) +#define bfin_read_DMA0_CURR_X_COUNT() bfin_read16(DMA0_CURR_X_COUNT) +#define bfin_write_DMA0_CURR_X_COUNT(val) bfin_write16(DMA0_CURR_X_COUNT, val) +#define bfin_read_DMA0_CURR_Y_COUNT() bfin_read16(DMA0_CURR_Y_COUNT) +#define bfin_write_DMA0_CURR_Y_COUNT(val) bfin_write16(DMA0_CURR_Y_COUNT, val) +#define bfin_read_DMA1_NEXT_DESC_PTR() bfin_readPTR(DMA1_NEXT_DESC_PTR) +#define bfin_write_DMA1_NEXT_DESC_PTR(val) bfin_writePTR(DMA1_NEXT_DESC_PTR, val) +#define bfin_read_DMA1_START_ADDR() bfin_readPTR(DMA1_START_ADDR) +#define bfin_write_DMA1_START_ADDR(val) bfin_writePTR(DMA1_START_ADDR, val) +#define bfin_read_DMA1_CONFIG() bfin_read16(DMA1_CONFIG) +#define bfin_write_DMA1_CONFIG(val) bfin_write16(DMA1_CONFIG, val) +#define bfin_read_DMA1_X_COUNT() bfin_read16(DMA1_X_COUNT) +#define bfin_write_DMA1_X_COUNT(val) bfin_write16(DMA1_X_COUNT, val) +#define bfin_read_DMA1_X_MODIFY() bfin_read16(DMA1_X_MODIFY) +#define bfin_write_DMA1_X_MODIFY(val) bfin_write16(DMA1_X_MODIFY, val) +#define bfin_read_DMA1_Y_COUNT() bfin_read16(DMA1_Y_COUNT) +#define bfin_write_DMA1_Y_COUNT(val) bfin_write16(DMA1_Y_COUNT, val) +#define bfin_read_DMA1_Y_MODIFY() bfin_read16(DMA1_Y_MODIFY) +#define bfin_write_DMA1_Y_MODIFY(val) bfin_write16(DMA1_Y_MODIFY, val) +#define bfin_read_DMA1_CURR_DESC_PTR() bfin_readPTR(DMA1_CURR_DESC_PTR) +#define bfin_write_DMA1_CURR_DESC_PTR(val) bfin_writePTR(DMA1_CURR_DESC_PTR, val) +#define bfin_read_DMA1_CURR_ADDR() bfin_readPTR(DMA1_CURR_ADDR) +#define bfin_write_DMA1_CURR_ADDR(val) bfin_writePTR(DMA1_CURR_ADDR, val) +#define bfin_read_DMA1_IRQ_STATUS() bfin_read16(DMA1_IRQ_STATUS) +#define bfin_write_DMA1_IRQ_STATUS(val) bfin_write16(DMA1_IRQ_STATUS, val) +#define bfin_read_DMA1_PERIPHERAL_MAP() bfin_read16(DMA1_PERIPHERAL_MAP) +#define bfin_write_DMA1_PERIPHERAL_MAP(val) bfin_write16(DMA1_PERIPHERAL_MAP, val) +#define bfin_read_DMA1_CURR_X_COUNT() bfin_read16(DMA1_CURR_X_COUNT) +#define bfin_write_DMA1_CURR_X_COUNT(val) bfin_write16(DMA1_CURR_X_COUNT, val) +#define bfin_read_DMA1_CURR_Y_COUNT() bfin_read16(DMA1_CURR_Y_COUNT) +#define bfin_write_DMA1_CURR_Y_COUNT(val) bfin_write16(DMA1_CURR_Y_COUNT, val) +#define bfin_read_DMA2_NEXT_DESC_PTR() bfin_readPTR(DMA2_NEXT_DESC_PTR) +#define bfin_write_DMA2_NEXT_DESC_PTR(val) bfin_writePTR(DMA2_NEXT_DESC_PTR, val) +#define bfin_read_DMA2_START_ADDR() bfin_readPTR(DMA2_START_ADDR) +#define bfin_write_DMA2_START_ADDR(val) bfin_writePTR(DMA2_START_ADDR, val) +#define bfin_read_DMA2_CONFIG() bfin_read16(DMA2_CONFIG) +#define bfin_write_DMA2_CONFIG(val) bfin_write16(DMA2_CONFIG, val) +#define bfin_read_DMA2_X_COUNT() bfin_read16(DMA2_X_COUNT) +#define bfin_write_DMA2_X_COUNT(val) bfin_write16(DMA2_X_COUNT, val) +#define bfin_read_DMA2_X_MODIFY() bfin_read16(DMA2_X_MODIFY) +#define bfin_write_DMA2_X_MODIFY(val) bfin_write16(DMA2_X_MODIFY, val) +#define bfin_read_DMA2_Y_COUNT() bfin_read16(DMA2_Y_COUNT) +#define bfin_write_DMA2_Y_COUNT(val) bfin_write16(DMA2_Y_COUNT, val) +#define bfin_read_DMA2_Y_MODIFY() bfin_read16(DMA2_Y_MODIFY) +#define bfin_write_DMA2_Y_MODIFY(val) bfin_write16(DMA2_Y_MODIFY, val) +#define bfin_read_DMA2_CURR_DESC_PTR() bfin_readPTR(DMA2_CURR_DESC_PTR) +#define bfin_write_DMA2_CURR_DESC_PTR(val) bfin_writePTR(DMA2_CURR_DESC_PTR, val) +#define bfin_read_DMA2_CURR_ADDR() bfin_readPTR(DMA2_CURR_ADDR) +#define bfin_write_DMA2_CURR_ADDR(val) bfin_writePTR(DMA2_CURR_ADDR, val) +#define bfin_read_DMA2_IRQ_STATUS() bfin_read16(DMA2_IRQ_STATUS) +#define bfin_write_DMA2_IRQ_STATUS(val) bfin_write16(DMA2_IRQ_STATUS, val) +#define bfin_read_DMA2_PERIPHERAL_MAP() bfin_read16(DMA2_PERIPHERAL_MAP) +#define bfin_write_DMA2_PERIPHERAL_MAP(val) bfin_write16(DMA2_PERIPHERAL_MAP, val) +#define bfin_read_DMA2_CURR_X_COUNT() bfin_read16(DMA2_CURR_X_COUNT) +#define bfin_write_DMA2_CURR_X_COUNT(val) bfin_write16(DMA2_CURR_X_COUNT, val) +#define bfin_read_DMA2_CURR_Y_COUNT() bfin_read16(DMA2_CURR_Y_COUNT) +#define bfin_write_DMA2_CURR_Y_COUNT(val) bfin_write16(DMA2_CURR_Y_COUNT, val) +#define bfin_read_DMA3_NEXT_DESC_PTR() bfin_readPTR(DMA3_NEXT_DESC_PTR) +#define bfin_write_DMA3_NEXT_DESC_PTR(val) bfin_writePTR(DMA3_NEXT_DESC_PTR, val) +#define bfin_read_DMA3_START_ADDR() bfin_readPTR(DMA3_START_ADDR) +#define bfin_write_DMA3_START_ADDR(val) bfin_writePTR(DMA3_START_ADDR, val) +#define bfin_read_DMA3_CONFIG() bfin_read16(DMA3_CONFIG) +#define bfin_write_DMA3_CONFIG(val) bfin_write16(DMA3_CONFIG, val) +#define bfin_read_DMA3_X_COUNT() bfin_read16(DMA3_X_COUNT) +#define bfin_write_DMA3_X_COUNT(val) bfin_write16(DMA3_X_COUNT, val) +#define bfin_read_DMA3_X_MODIFY() bfin_read16(DMA3_X_MODIFY) +#define bfin_write_DMA3_X_MODIFY(val) bfin_write16(DMA3_X_MODIFY, val) +#define bfin_read_DMA3_Y_COUNT() bfin_read16(DMA3_Y_COUNT) +#define bfin_write_DMA3_Y_COUNT(val) bfin_write16(DMA3_Y_COUNT, val) +#define bfin_read_DMA3_Y_MODIFY() bfin_read16(DMA3_Y_MODIFY) +#define bfin_write_DMA3_Y_MODIFY(val) bfin_write16(DMA3_Y_MODIFY, val) +#define bfin_read_DMA3_CURR_DESC_PTR() bfin_readPTR(DMA3_CURR_DESC_PTR) +#define bfin_write_DMA3_CURR_DESC_PTR(val) bfin_writePTR(DMA3_CURR_DESC_PTR, val) +#define bfin_read_DMA3_CURR_ADDR() bfin_readPTR(DMA3_CURR_ADDR) +#define bfin_write_DMA3_CURR_ADDR(val) bfin_writePTR(DMA3_CURR_ADDR, val) +#define bfin_read_DMA3_IRQ_STATUS() bfin_read16(DMA3_IRQ_STATUS) +#define bfin_write_DMA3_IRQ_STATUS(val) bfin_write16(DMA3_IRQ_STATUS, val) +#define bfin_read_DMA3_PERIPHERAL_MAP() bfin_read16(DMA3_PERIPHERAL_MAP) +#define bfin_write_DMA3_PERIPHERAL_MAP(val) bfin_write16(DMA3_PERIPHERAL_MAP, val) +#define bfin_read_DMA3_CURR_X_COUNT() bfin_read16(DMA3_CURR_X_COUNT) +#define bfin_write_DMA3_CURR_X_COUNT(val) bfin_write16(DMA3_CURR_X_COUNT, val) +#define bfin_read_DMA3_CURR_Y_COUNT() bfin_read16(DMA3_CURR_Y_COUNT) +#define bfin_write_DMA3_CURR_Y_COUNT(val) bfin_write16(DMA3_CURR_Y_COUNT, val) +#define bfin_read_DMA4_NEXT_DESC_PTR() bfin_readPTR(DMA4_NEXT_DESC_PTR) +#define bfin_write_DMA4_NEXT_DESC_PTR(val) bfin_writePTR(DMA4_NEXT_DESC_PTR, val) +#define bfin_read_DMA4_START_ADDR() bfin_readPTR(DMA4_START_ADDR) +#define bfin_write_DMA4_START_ADDR(val) bfin_writePTR(DMA4_START_ADDR, val) +#define bfin_read_DMA4_CONFIG() bfin_read16(DMA4_CONFIG) +#define bfin_write_DMA4_CONFIG(val) bfin_write16(DMA4_CONFIG, val) +#define bfin_read_DMA4_X_COUNT() bfin_read16(DMA4_X_COUNT) +#define bfin_write_DMA4_X_COUNT(val) bfin_write16(DMA4_X_COUNT, val) +#define bfin_read_DMA4_X_MODIFY() bfin_read16(DMA4_X_MODIFY) +#define bfin_write_DMA4_X_MODIFY(val) bfin_write16(DMA4_X_MODIFY, val) +#define bfin_read_DMA4_Y_COUNT() bfin_read16(DMA4_Y_COUNT) +#define bfin_write_DMA4_Y_COUNT(val) bfin_write16(DMA4_Y_COUNT, val) +#define bfin_read_DMA4_Y_MODIFY() bfin_read16(DMA4_Y_MODIFY) +#define bfin_write_DMA4_Y_MODIFY(val) bfin_write16(DMA4_Y_MODIFY, val) +#define bfin_read_DMA4_CURR_DESC_PTR() bfin_readPTR(DMA4_CURR_DESC_PTR) +#define bfin_write_DMA4_CURR_DESC_PTR(val) bfin_writePTR(DMA4_CURR_DESC_PTR, val) +#define bfin_read_DMA4_CURR_ADDR() bfin_readPTR(DMA4_CURR_ADDR) +#define bfin_write_DMA4_CURR_ADDR(val) bfin_writePTR(DMA4_CURR_ADDR, val) +#define bfin_read_DMA4_IRQ_STATUS() bfin_read16(DMA4_IRQ_STATUS) +#define bfin_write_DMA4_IRQ_STATUS(val) bfin_write16(DMA4_IRQ_STATUS, val) +#define bfin_read_DMA4_PERIPHERAL_MAP() bfin_read16(DMA4_PERIPHERAL_MAP) +#define bfin_write_DMA4_PERIPHERAL_MAP(val) bfin_write16(DMA4_PERIPHERAL_MAP, val) +#define bfin_read_DMA4_CURR_X_COUNT() bfin_read16(DMA4_CURR_X_COUNT) +#define bfin_write_DMA4_CURR_X_COUNT(val) bfin_write16(DMA4_CURR_X_COUNT, val) +#define bfin_read_DMA4_CURR_Y_COUNT() bfin_read16(DMA4_CURR_Y_COUNT) +#define bfin_write_DMA4_CURR_Y_COUNT(val) bfin_write16(DMA4_CURR_Y_COUNT, val) +#define bfin_read_DMA5_NEXT_DESC_PTR() bfin_readPTR(DMA5_NEXT_DESC_PTR) +#define bfin_write_DMA5_NEXT_DESC_PTR(val) bfin_writePTR(DMA5_NEXT_DESC_PTR, val) +#define bfin_read_DMA5_START_ADDR() bfin_readPTR(DMA5_START_ADDR) +#define bfin_write_DMA5_START_ADDR(val) bfin_writePTR(DMA5_START_ADDR, val) +#define bfin_read_DMA5_CONFIG() bfin_read16(DMA5_CONFIG) +#define bfin_write_DMA5_CONFIG(val) bfin_write16(DMA5_CONFIG, val) +#define bfin_read_DMA5_X_COUNT() bfin_read16(DMA5_X_COUNT) +#define bfin_write_DMA5_X_COUNT(val) bfin_write16(DMA5_X_COUNT, val) +#define bfin_read_DMA5_X_MODIFY() bfin_read16(DMA5_X_MODIFY) +#define bfin_write_DMA5_X_MODIFY(val) bfin_write16(DMA5_X_MODIFY, val) +#define bfin_read_DMA5_Y_COUNT() bfin_read16(DMA5_Y_COUNT) +#define bfin_write_DMA5_Y_COUNT(val) bfin_write16(DMA5_Y_COUNT, val) +#define bfin_read_DMA5_Y_MODIFY() bfin_read16(DMA5_Y_MODIFY) +#define bfin_write_DMA5_Y_MODIFY(val) bfin_write16(DMA5_Y_MODIFY, val) +#define bfin_read_DMA5_CURR_DESC_PTR() bfin_readPTR(DMA5_CURR_DESC_PTR) +#define bfin_write_DMA5_CURR_DESC_PTR(val) bfin_writePTR(DMA5_CURR_DESC_PTR, val) +#define bfin_read_DMA5_CURR_ADDR() bfin_readPTR(DMA5_CURR_ADDR) +#define bfin_write_DMA5_CURR_ADDR(val) bfin_writePTR(DMA5_CURR_ADDR, val) +#define bfin_read_DMA5_IRQ_STATUS() bfin_read16(DMA5_IRQ_STATUS) +#define bfin_write_DMA5_IRQ_STATUS(val) bfin_write16(DMA5_IRQ_STATUS, val) +#define bfin_read_DMA5_PERIPHERAL_MAP() bfin_read16(DMA5_PERIPHERAL_MAP) +#define bfin_write_DMA5_PERIPHERAL_MAP(val) bfin_write16(DMA5_PERIPHERAL_MAP, val) +#define bfin_read_DMA5_CURR_X_COUNT() bfin_read16(DMA5_CURR_X_COUNT) +#define bfin_write_DMA5_CURR_X_COUNT(val) bfin_write16(DMA5_CURR_X_COUNT, val) +#define bfin_read_DMA5_CURR_Y_COUNT() bfin_read16(DMA5_CURR_Y_COUNT) +#define bfin_write_DMA5_CURR_Y_COUNT(val) bfin_write16(DMA5_CURR_Y_COUNT, val) +#define bfin_read_DMA6_NEXT_DESC_PTR() bfin_read32(DMA6_NEXT_DESC_PTR) +#define bfin_write_DMA6_NEXT_DESC_PTR(val) bfin_write32(DMA6_NEXT_DESC_PTR, val) +#define bfin_read_DMA6_START_ADDR() bfin_readPTR(DMA6_START_ADDR) +#define bfin_write_DMA6_START_ADDR(val) bfin_writePTR(DMA6_START_ADDR, val) +#define bfin_read_DMA6_CONFIG() bfin_read16(DMA6_CONFIG) +#define bfin_write_DMA6_CONFIG(val) bfin_write16(DMA6_CONFIG, val) +#define bfin_read_DMA6_X_COUNT() bfin_read16(DMA6_X_COUNT) +#define bfin_write_DMA6_X_COUNT(val) bfin_write16(DMA6_X_COUNT, val) +#define bfin_read_DMA6_X_MODIFY() bfin_read16(DMA6_X_MODIFY) +#define bfin_write_DMA6_X_MODIFY(val) bfin_write16(DMA6_X_MODIFY, val) +#define bfin_read_DMA6_Y_COUNT() bfin_read16(DMA6_Y_COUNT) +#define bfin_write_DMA6_Y_COUNT(val) bfin_write16(DMA6_Y_COUNT, val) +#define bfin_read_DMA6_Y_MODIFY() bfin_read16(DMA6_Y_MODIFY) +#define bfin_write_DMA6_Y_MODIFY(val) bfin_write16(DMA6_Y_MODIFY, val) +#define bfin_read_DMA6_CURR_DESC_PTR() bfin_readPTR(DMA6_CURR_DESC_PTR) +#define bfin_write_DMA6_CURR_DESC_PTR(val) bfin_writePTR(DMA6_CURR_DESC_PTR, val) +#define bfin_read_DMA6_CURR_ADDR() bfin_readPTR(DMA6_CURR_ADDR) +#define bfin_write_DMA6_CURR_ADDR(val) bfin_writePTR(DMA6_CURR_ADDR, val) +#define bfin_read_DMA6_IRQ_STATUS() bfin_read16(DMA6_IRQ_STATUS) +#define bfin_write_DMA6_IRQ_STATUS(val) bfin_write16(DMA6_IRQ_STATUS, val) +#define bfin_read_DMA6_PERIPHERAL_MAP() bfin_read16(DMA6_PERIPHERAL_MAP) +#define bfin_write_DMA6_PERIPHERAL_MAP(val) bfin_write16(DMA6_PERIPHERAL_MAP, val) +#define bfin_read_DMA6_CURR_X_COUNT() bfin_read16(DMA6_CURR_X_COUNT) +#define bfin_write_DMA6_CURR_X_COUNT(val) bfin_write16(DMA6_CURR_X_COUNT, val) +#define bfin_read_DMA6_CURR_Y_COUNT() bfin_read16(DMA6_CURR_Y_COUNT) +#define bfin_write_DMA6_CURR_Y_COUNT(val) bfin_write16(DMA6_CURR_Y_COUNT, val) +#define bfin_read_DMA7_NEXT_DESC_PTR() bfin_readPTR(DMA7_NEXT_DESC_PTR) +#define bfin_write_DMA7_NEXT_DESC_PTR(val) bfin_writePTR(DMA7_NEXT_DESC_PTR, val) +#define bfin_read_DMA7_START_ADDR() bfin_readPTR(DMA7_START_ADDR) +#define bfin_write_DMA7_START_ADDR(val) bfin_writePTR(DMA7_START_ADDR, val) +#define bfin_read_DMA7_CONFIG() bfin_read16(DMA7_CONFIG) +#define bfin_write_DMA7_CONFIG(val) bfin_write16(DMA7_CONFIG, val) +#define bfin_read_DMA7_X_COUNT() bfin_read16(DMA7_X_COUNT) +#define bfin_write_DMA7_X_COUNT(val) bfin_write16(DMA7_X_COUNT, val) +#define bfin_read_DMA7_X_MODIFY() bfin_read16(DMA7_X_MODIFY) +#define bfin_write_DMA7_X_MODIFY(val) bfin_write16(DMA7_X_MODIFY, val) +#define bfin_read_DMA7_Y_COUNT() bfin_read16(DMA7_Y_COUNT) +#define bfin_write_DMA7_Y_COUNT(val) bfin_write16(DMA7_Y_COUNT, val) +#define bfin_read_DMA7_Y_MODIFY() bfin_read16(DMA7_Y_MODIFY) +#define bfin_write_DMA7_Y_MODIFY(val) bfin_write16(DMA7_Y_MODIFY, val) +#define bfin_read_DMA7_CURR_DESC_PTR() bfin_readPTR(DMA7_CURR_DESC_PTR) +#define bfin_write_DMA7_CURR_DESC_PTR(val) bfin_writePTR(DMA7_CURR_DESC_PTR, val) +#define bfin_read_DMA7_CURR_ADDR() bfin_readPTR(DMA7_CURR_ADDR) +#define bfin_write_DMA7_CURR_ADDR(val) bfin_writePTR(DMA7_CURR_ADDR, val) +#define bfin_read_DMA7_IRQ_STATUS() bfin_read16(DMA7_IRQ_STATUS) +#define bfin_write_DMA7_IRQ_STATUS(val) bfin_write16(DMA7_IRQ_STATUS, val) +#define bfin_read_DMA7_PERIPHERAL_MAP() bfin_read16(DMA7_PERIPHERAL_MAP) +#define bfin_write_DMA7_PERIPHERAL_MAP(val) bfin_write16(DMA7_PERIPHERAL_MAP, val) +#define bfin_read_DMA7_CURR_X_COUNT() bfin_read16(DMA7_CURR_X_COUNT) +#define bfin_write_DMA7_CURR_X_COUNT(val) bfin_write16(DMA7_CURR_X_COUNT, val) +#define bfin_read_DMA7_CURR_Y_COUNT() bfin_read16(DMA7_CURR_Y_COUNT) +#define bfin_write_DMA7_CURR_Y_COUNT(val) bfin_write16(DMA7_CURR_Y_COUNT, val) +#define bfin_read_DMA8_NEXT_DESC_PTR() bfin_readPTR(DMA8_NEXT_DESC_PTR) +#define bfin_write_DMA8_NEXT_DESC_PTR(val) bfin_writePTR(DMA8_NEXT_DESC_PTR, val) +#define bfin_read_DMA8_START_ADDR() bfin_readPTR(DMA8_START_ADDR) +#define bfin_write_DMA8_START_ADDR(val) bfin_writePTR(DMA8_START_ADDR, val) +#define bfin_read_DMA8_CONFIG() bfin_read16(DMA8_CONFIG) +#define bfin_write_DMA8_CONFIG(val) bfin_write16(DMA8_CONFIG, val) +#define bfin_read_DMA8_X_COUNT() bfin_read16(DMA8_X_COUNT) +#define bfin_write_DMA8_X_COUNT(val) bfin_write16(DMA8_X_COUNT, val) +#define bfin_read_DMA8_X_MODIFY() bfin_read16(DMA8_X_MODIFY) +#define bfin_write_DMA8_X_MODIFY(val) bfin_write16(DMA8_X_MODIFY, val) +#define bfin_read_DMA8_Y_COUNT() bfin_read16(DMA8_Y_COUNT) +#define bfin_write_DMA8_Y_COUNT(val) bfin_write16(DMA8_Y_COUNT, val) +#define bfin_read_DMA8_Y_MODIFY() bfin_read16(DMA8_Y_MODIFY) +#define bfin_write_DMA8_Y_MODIFY(val) bfin_write16(DMA8_Y_MODIFY, val) +#define bfin_read_DMA8_CURR_DESC_PTR() bfin_readPTR(DMA8_CURR_DESC_PTR) +#define bfin_write_DMA8_CURR_DESC_PTR(val) bfin_writePTR(DMA8_CURR_DESC_PTR, val) +#define bfin_read_DMA8_CURR_ADDR() bfin_readPTR(DMA8_CURR_ADDR) +#define bfin_write_DMA8_CURR_ADDR(val) bfin_writePTR(DMA8_CURR_ADDR, val) +#define bfin_read_DMA8_IRQ_STATUS() bfin_read16(DMA8_IRQ_STATUS) +#define bfin_write_DMA8_IRQ_STATUS(val) bfin_write16(DMA8_IRQ_STATUS, val) +#define bfin_read_DMA8_PERIPHERAL_MAP() bfin_read16(DMA8_PERIPHERAL_MAP) +#define bfin_write_DMA8_PERIPHERAL_MAP(val) bfin_write16(DMA8_PERIPHERAL_MAP, val) +#define bfin_read_DMA8_CURR_X_COUNT() bfin_read16(DMA8_CURR_X_COUNT) +#define bfin_write_DMA8_CURR_X_COUNT(val) bfin_write16(DMA8_CURR_X_COUNT, val) +#define bfin_read_DMA8_CURR_Y_COUNT() bfin_read16(DMA8_CURR_Y_COUNT) +#define bfin_write_DMA8_CURR_Y_COUNT(val) bfin_write16(DMA8_CURR_Y_COUNT, val) +#define bfin_read_DMA9_NEXT_DESC_PTR() bfin_readPTR(DMA9_NEXT_DESC_PTR) +#define bfin_write_DMA9_NEXT_DESC_PTR(val) bfin_writePTR(DMA9_NEXT_DESC_PTR, val) +#define bfin_read_DMA9_START_ADDR() bfin_readPTR(DMA9_START_ADDR) +#define bfin_write_DMA9_START_ADDR(val) bfin_writePTR(DMA9_START_ADDR, val) +#define bfin_read_DMA9_CONFIG() bfin_read16(DMA9_CONFIG) +#define bfin_write_DMA9_CONFIG(val) bfin_write16(DMA9_CONFIG, val) +#define bfin_read_DMA9_X_COUNT() bfin_read16(DMA9_X_COUNT) +#define bfin_write_DMA9_X_COUNT(val) bfin_write16(DMA9_X_COUNT, val) +#define bfin_read_DMA9_X_MODIFY() bfin_read16(DMA9_X_MODIFY) +#define bfin_write_DMA9_X_MODIFY(val) bfin_write16(DMA9_X_MODIFY, val) +#define bfin_read_DMA9_Y_COUNT() bfin_read16(DMA9_Y_COUNT) +#define bfin_write_DMA9_Y_COUNT(val) bfin_write16(DMA9_Y_COUNT, val) +#define bfin_read_DMA9_Y_MODIFY() bfin_read16(DMA9_Y_MODIFY) +#define bfin_write_DMA9_Y_MODIFY(val) bfin_write16(DMA9_Y_MODIFY, val) +#define bfin_read_DMA9_CURR_DESC_PTR() bfin_readPTR(DMA9_CURR_DESC_PTR) +#define bfin_write_DMA9_CURR_DESC_PTR(val) bfin_writePTR(DMA9_CURR_DESC_PTR, val) +#define bfin_read_DMA9_CURR_ADDR() bfin_readPTR(DMA9_CURR_ADDR) +#define bfin_write_DMA9_CURR_ADDR(val) bfin_writePTR(DMA9_CURR_ADDR, val) +#define bfin_read_DMA9_IRQ_STATUS() bfin_read16(DMA9_IRQ_STATUS) +#define bfin_write_DMA9_IRQ_STATUS(val) bfin_write16(DMA9_IRQ_STATUS, val) +#define bfin_read_DMA9_PERIPHERAL_MAP() bfin_read16(DMA9_PERIPHERAL_MAP) +#define bfin_write_DMA9_PERIPHERAL_MAP(val) bfin_write16(DMA9_PERIPHERAL_MAP, val) +#define bfin_read_DMA9_CURR_X_COUNT() bfin_read16(DMA9_CURR_X_COUNT) +#define bfin_write_DMA9_CURR_X_COUNT(val) bfin_write16(DMA9_CURR_X_COUNT, val) +#define bfin_read_DMA9_CURR_Y_COUNT() bfin_read16(DMA9_CURR_Y_COUNT) +#define bfin_write_DMA9_CURR_Y_COUNT(val) bfin_write16(DMA9_CURR_Y_COUNT, val) +#define bfin_read_DMA10_NEXT_DESC_PTR() bfin_readPTR(DMA10_NEXT_DESC_PTR) +#define bfin_write_DMA10_NEXT_DESC_PTR(val) bfin_writePTR(DMA10_NEXT_DESC_PTR, val) +#define bfin_read_DMA10_START_ADDR() bfin_readPTR(DMA10_START_ADDR) +#define bfin_write_DMA10_START_ADDR(val) bfin_writePTR(DMA10_START_ADDR, val) +#define bfin_read_DMA10_CONFIG() bfin_read16(DMA10_CONFIG) +#define bfin_write_DMA10_CONFIG(val) bfin_write16(DMA10_CONFIG, val) +#define bfin_read_DMA10_X_COUNT() bfin_read16(DMA10_X_COUNT) +#define bfin_write_DMA10_X_COUNT(val) bfin_write16(DMA10_X_COUNT, val) +#define bfin_read_DMA10_X_MODIFY() bfin_read16(DMA10_X_MODIFY) +#define bfin_write_DMA10_X_MODIFY(val) bfin_write16(DMA10_X_MODIFY, val) +#define bfin_read_DMA10_Y_COUNT() bfin_read16(DMA10_Y_COUNT) +#define bfin_write_DMA10_Y_COUNT(val) bfin_write16(DMA10_Y_COUNT, val) +#define bfin_read_DMA10_Y_MODIFY() bfin_read16(DMA10_Y_MODIFY) +#define bfin_write_DMA10_Y_MODIFY(val) bfin_write16(DMA10_Y_MODIFY, val) +#define bfin_read_DMA10_CURR_DESC_PTR() bfin_readPTR(DMA10_CURR_DESC_PTR) +#define bfin_write_DMA10_CURR_DESC_PTR(val) bfin_writePTR(DMA10_CURR_DESC_PTR, val) +#define bfin_read_DMA10_CURR_ADDR() bfin_readPTR(DMA10_CURR_ADDR) +#define bfin_write_DMA10_CURR_ADDR(val) bfin_writePTR(DMA10_CURR_ADDR, val) +#define bfin_read_DMA10_IRQ_STATUS() bfin_read16(DMA10_IRQ_STATUS) +#define bfin_write_DMA10_IRQ_STATUS(val) bfin_write16(DMA10_IRQ_STATUS, val) +#define bfin_read_DMA10_PERIPHERAL_MAP() bfin_read16(DMA10_PERIPHERAL_MAP) +#define bfin_write_DMA10_PERIPHERAL_MAP(val) bfin_write16(DMA10_PERIPHERAL_MAP, val) +#define bfin_read_DMA10_CURR_X_COUNT() bfin_read16(DMA10_CURR_X_COUNT) +#define bfin_write_DMA10_CURR_X_COUNT(val) bfin_write16(DMA10_CURR_X_COUNT, val) +#define bfin_read_DMA10_CURR_Y_COUNT() bfin_read16(DMA10_CURR_Y_COUNT) +#define bfin_write_DMA10_CURR_Y_COUNT(val) bfin_write16(DMA10_CURR_Y_COUNT, val) +#define bfin_read_DMA11_NEXT_DESC_PTR() bfin_readPTR(DMA11_NEXT_DESC_PTR) +#define bfin_write_DMA11_NEXT_DESC_PTR(val) bfin_writePTR(DMA11_NEXT_DESC_PTR, val) +#define bfin_read_DMA11_START_ADDR() bfin_readPTR(DMA11_START_ADDR) +#define bfin_write_DMA11_START_ADDR(val) bfin_writePTR(DMA11_START_ADDR, val) +#define bfin_read_DMA11_CONFIG() bfin_read16(DMA11_CONFIG) +#define bfin_write_DMA11_CONFIG(val) bfin_write16(DMA11_CONFIG, val) +#define bfin_read_DMA11_X_COUNT() bfin_read16(DMA11_X_COUNT) +#define bfin_write_DMA11_X_COUNT(val) bfin_write16(DMA11_X_COUNT, val) +#define bfin_read_DMA11_X_MODIFY() bfin_read16(DMA11_X_MODIFY) +#define bfin_write_DMA11_X_MODIFY(val) bfin_write16(DMA11_X_MODIFY, val) +#define bfin_read_DMA11_Y_COUNT() bfin_read16(DMA11_Y_COUNT) +#define bfin_write_DMA11_Y_COUNT(val) bfin_write16(DMA11_Y_COUNT, val) +#define bfin_read_DMA11_Y_MODIFY() bfin_read16(DMA11_Y_MODIFY) +#define bfin_write_DMA11_Y_MODIFY(val) bfin_write16(DMA11_Y_MODIFY, val) +#define bfin_read_DMA11_CURR_DESC_PTR() bfin_readPTR(DMA11_CURR_DESC_PTR) +#define bfin_write_DMA11_CURR_DESC_PTR(val) bfin_writePTR(DMA11_CURR_DESC_PTR, val) +#define bfin_read_DMA11_CURR_ADDR() bfin_readPTR(DMA11_CURR_ADDR) +#define bfin_write_DMA11_CURR_ADDR(val) bfin_writePTR(DMA11_CURR_ADDR, val) +#define bfin_read_DMA11_IRQ_STATUS() bfin_read16(DMA11_IRQ_STATUS) +#define bfin_write_DMA11_IRQ_STATUS(val) bfin_write16(DMA11_IRQ_STATUS, val) +#define bfin_read_DMA11_PERIPHERAL_MAP() bfin_read16(DMA11_PERIPHERAL_MAP) +#define bfin_write_DMA11_PERIPHERAL_MAP(val) bfin_write16(DMA11_PERIPHERAL_MAP, val) +#define bfin_read_DMA11_CURR_X_COUNT() bfin_read16(DMA11_CURR_X_COUNT) +#define bfin_write_DMA11_CURR_X_COUNT(val) bfin_write16(DMA11_CURR_X_COUNT, val) +#define bfin_read_DMA11_CURR_Y_COUNT() bfin_read16(DMA11_CURR_Y_COUNT) +#define bfin_write_DMA11_CURR_Y_COUNT(val) bfin_write16(DMA11_CURR_Y_COUNT, val) +#define bfin_read_MDMA_S0_NEXT_DESC_PTR() bfin_readPTR(MDMA_S0_NEXT_DESC_PTR) +#define bfin_write_MDMA_S0_NEXT_DESC_PTR(val) bfin_writePTR(MDMA_S0_NEXT_DESC_PTR, val) +#define bfin_read_MDMA_S0_START_ADDR() bfin_readPTR(MDMA_S0_START_ADDR) +#define bfin_write_MDMA_S0_START_ADDR(val) bfin_writePTR(MDMA_S0_START_ADDR, val) +#define bfin_read_MDMA_S0_CONFIG() bfin_read16(MDMA_S0_CONFIG) +#define bfin_write_MDMA_S0_CONFIG(val) bfin_write16(MDMA_S0_CONFIG, val) +#define bfin_read_MDMA_S0_X_COUNT() bfin_read16(MDMA_S0_X_COUNT) +#define bfin_write_MDMA_S0_X_COUNT(val) bfin_write16(MDMA_S0_X_COUNT, val) +#define bfin_read_MDMA_S0_X_MODIFY() bfin_read16(MDMA_S0_X_MODIFY) +#define bfin_write_MDMA_S0_X_MODIFY(val) bfin_write16(MDMA_S0_X_MODIFY, val) +#define bfin_read_MDMA_S0_Y_COUNT() bfin_read16(MDMA_S0_Y_COUNT) +#define bfin_write_MDMA_S0_Y_COUNT(val) bfin_write16(MDMA_S0_Y_COUNT, val) +#define bfin_read_MDMA_S0_Y_MODIFY() bfin_read16(MDMA_S0_Y_MODIFY) +#define bfin_write_MDMA_S0_Y_MODIFY(val) bfin_write16(MDMA_S0_Y_MODIFY, val) +#define bfin_read_MDMA_S0_CURR_DESC_PTR() bfin_readPTR(MDMA_S0_CURR_DESC_PTR) +#define bfin_write_MDMA_S0_CURR_DESC_PTR(val) bfin_writePTR(MDMA_S0_CURR_DESC_PTR, val) +#define bfin_read_MDMA_S0_CURR_ADDR() bfin_readPTR(MDMA_S0_CURR_ADDR) +#define bfin_write_MDMA_S0_CURR_ADDR(val) bfin_writePTR(MDMA_S0_CURR_ADDR, val) +#define bfin_read_MDMA_S0_IRQ_STATUS() bfin_read16(MDMA_S0_IRQ_STATUS) +#define bfin_write_MDMA_S0_IRQ_STATUS(val) bfin_write16(MDMA_S0_IRQ_STATUS, val) +#define bfin_read_MDMA_S0_PERIPHERAL_MAP() bfin_read16(MDMA_S0_PERIPHERAL_MAP) +#define bfin_write_MDMA_S0_PERIPHERAL_MAP(val) bfin_write16(MDMA_S0_PERIPHERAL_MAP, val) +#define bfin_read_MDMA_S0_CURR_X_COUNT() bfin_read16(MDMA_S0_CURR_X_COUNT) +#define bfin_write_MDMA_S0_CURR_X_COUNT(val) bfin_write16(MDMA_S0_CURR_X_COUNT, val) +#define bfin_read_MDMA_S0_CURR_Y_COUNT() bfin_read16(MDMA_S0_CURR_Y_COUNT) +#define bfin_write_MDMA_S0_CURR_Y_COUNT(val) bfin_write16(MDMA_S0_CURR_Y_COUNT, val) +#define bfin_read_MDMA_D0_NEXT_DESC_PTR() bfin_readPTR(MDMA_D0_NEXT_DESC_PTR) +#define bfin_write_MDMA_D0_NEXT_DESC_PTR(val) bfin_writePTR(MDMA_D0_NEXT_DESC_PTR, val) +#define bfin_read_MDMA_D0_START_ADDR() bfin_readPTR(MDMA_D0_START_ADDR) +#define bfin_write_MDMA_D0_START_ADDR(val) bfin_writePTR(MDMA_D0_START_ADDR, val) +#define bfin_read_MDMA_D0_CONFIG() bfin_read16(MDMA_D0_CONFIG) +#define bfin_write_MDMA_D0_CONFIG(val) bfin_write16(MDMA_D0_CONFIG, val) +#define bfin_read_MDMA_D0_X_COUNT() bfin_read16(MDMA_D0_X_COUNT) +#define bfin_write_MDMA_D0_X_COUNT(val) bfin_write16(MDMA_D0_X_COUNT, val) +#define bfin_read_MDMA_D0_X_MODIFY() bfin_read16(MDMA_D0_X_MODIFY) +#define bfin_write_MDMA_D0_X_MODIFY(val) bfin_write16(MDMA_D0_X_MODIFY, val) +#define bfin_read_MDMA_D0_Y_COUNT() bfin_read16(MDMA_D0_Y_COUNT) +#define bfin_write_MDMA_D0_Y_COUNT(val) bfin_write16(MDMA_D0_Y_COUNT, val) +#define bfin_read_MDMA_D0_Y_MODIFY() bfin_read16(MDMA_D0_Y_MODIFY) +#define bfin_write_MDMA_D0_Y_MODIFY(val) bfin_write16(MDMA_D0_Y_MODIFY, val) +#define bfin_read_MDMA_D0_CURR_DESC_PTR() bfin_readPTR(MDMA_D0_CURR_DESC_PTR) +#define bfin_write_MDMA_D0_CURR_DESC_PTR(val) bfin_writePTR(MDMA_D0_CURR_DESC_PTR, val) +#define bfin_read_MDMA_D0_CURR_ADDR() bfin_readPTR(MDMA_D0_CURR_ADDR) +#define bfin_write_MDMA_D0_CURR_ADDR(val) bfin_writePTR(MDMA_D0_CURR_ADDR, val) +#define bfin_read_MDMA_D0_IRQ_STATUS() bfin_read16(MDMA_D0_IRQ_STATUS) +#define bfin_write_MDMA_D0_IRQ_STATUS(val) bfin_write16(MDMA_D0_IRQ_STATUS, val) +#define bfin_read_MDMA_D0_PERIPHERAL_MAP() bfin_read16(MDMA_D0_PERIPHERAL_MAP) +#define bfin_write_MDMA_D0_PERIPHERAL_MAP(val) bfin_write16(MDMA_D0_PERIPHERAL_MAP, val) +#define bfin_read_MDMA_D0_CURR_X_COUNT() bfin_read16(MDMA_D0_CURR_X_COUNT) +#define bfin_write_MDMA_D0_CURR_X_COUNT(val) bfin_write16(MDMA_D0_CURR_X_COUNT, val) +#define bfin_read_MDMA_D0_CURR_Y_COUNT() bfin_read16(MDMA_D0_CURR_Y_COUNT) +#define bfin_write_MDMA_D0_CURR_Y_COUNT(val) bfin_write16(MDMA_D0_CURR_Y_COUNT, val) +#define bfin_read_MDMA_S1_NEXT_DESC_PTR() bfin_readPTR(MDMA_S1_NEXT_DESC_PTR) +#define bfin_write_MDMA_S1_NEXT_DESC_PTR(val) bfin_writePTR(MDMA_S1_NEXT_DESC_PTR, val) +#define bfin_read_MDMA_S1_START_ADDR() bfin_readPTR(MDMA_S1_START_ADDR) +#define bfin_write_MDMA_S1_START_ADDR(val) bfin_writePTR(MDMA_S1_START_ADDR, val) +#define bfin_read_MDMA_S1_CONFIG() bfin_read16(MDMA_S1_CONFIG) +#define bfin_write_MDMA_S1_CONFIG(val) bfin_write16(MDMA_S1_CONFIG, val) +#define bfin_read_MDMA_S1_X_COUNT() bfin_read16(MDMA_S1_X_COUNT) +#define bfin_write_MDMA_S1_X_COUNT(val) bfin_write16(MDMA_S1_X_COUNT, val) +#define bfin_read_MDMA_S1_X_MODIFY() bfin_read16(MDMA_S1_X_MODIFY) +#define bfin_write_MDMA_S1_X_MODIFY(val) bfin_write16(MDMA_S1_X_MODIFY, val) +#define bfin_read_MDMA_S1_Y_COUNT() bfin_read16(MDMA_S1_Y_COUNT) +#define bfin_write_MDMA_S1_Y_COUNT(val) bfin_write16(MDMA_S1_Y_COUNT, val) +#define bfin_read_MDMA_S1_Y_MODIFY() bfin_read16(MDMA_S1_Y_MODIFY) +#define bfin_write_MDMA_S1_Y_MODIFY(val) bfin_write16(MDMA_S1_Y_MODIFY, val) +#define bfin_read_MDMA_S1_CURR_DESC_PTR() bfin_readPTR(MDMA_S1_CURR_DESC_PTR) +#define bfin_write_MDMA_S1_CURR_DESC_PTR(val) bfin_writePTR(MDMA_S1_CURR_DESC_PTR, val) +#define bfin_read_MDMA_S1_CURR_ADDR() bfin_readPTR(MDMA_S1_CURR_ADDR) +#define bfin_write_MDMA_S1_CURR_ADDR(val) bfin_writePTR(MDMA_S1_CURR_ADDR, val) +#define bfin_read_MDMA_S1_IRQ_STATUS() bfin_read16(MDMA_S1_IRQ_STATUS) +#define bfin_write_MDMA_S1_IRQ_STATUS(val) bfin_write16(MDMA_S1_IRQ_STATUS, val) +#define bfin_read_MDMA_S1_PERIPHERAL_MAP() bfin_read16(MDMA_S1_PERIPHERAL_MAP) +#define bfin_write_MDMA_S1_PERIPHERAL_MAP(val) bfin_write16(MDMA_S1_PERIPHERAL_MAP, val) +#define bfin_read_MDMA_S1_CURR_X_COUNT() bfin_read16(MDMA_S1_CURR_X_COUNT) +#define bfin_write_MDMA_S1_CURR_X_COUNT(val) bfin_write16(MDMA_S1_CURR_X_COUNT, val) +#define bfin_read_MDMA_S1_CURR_Y_COUNT() bfin_read16(MDMA_S1_CURR_Y_COUNT) +#define bfin_write_MDMA_S1_CURR_Y_COUNT(val) bfin_write16(MDMA_S1_CURR_Y_COUNT, val) +#define bfin_read_MDMA_D1_NEXT_DESC_PTR() bfin_readPTR(MDMA_D1_NEXT_DESC_PTR) +#define bfin_write_MDMA_D1_NEXT_DESC_PTR(val) bfin_writePTR(MDMA_D1_NEXT_DESC_PTR, val) +#define bfin_read_MDMA_D1_START_ADDR() bfin_readPTR(MDMA_D1_START_ADDR) +#define bfin_write_MDMA_D1_START_ADDR(val) bfin_writePTR(MDMA_D1_START_ADDR, val) +#define bfin_read_MDMA_D1_CONFIG() bfin_read16(MDMA_D1_CONFIG) +#define bfin_write_MDMA_D1_CONFIG(val) bfin_write16(MDMA_D1_CONFIG, val) +#define bfin_read_MDMA_D1_X_COUNT() bfin_read16(MDMA_D1_X_COUNT) +#define bfin_write_MDMA_D1_X_COUNT(val) bfin_write16(MDMA_D1_X_COUNT, val) +#define bfin_read_MDMA_D1_X_MODIFY() bfin_read16(MDMA_D1_X_MODIFY) +#define bfin_write_MDMA_D1_X_MODIFY(val) bfin_write16(MDMA_D1_X_MODIFY, val) +#define bfin_read_MDMA_D1_Y_COUNT() bfin_read16(MDMA_D1_Y_COUNT) +#define bfin_write_MDMA_D1_Y_COUNT(val) bfin_write16(MDMA_D1_Y_COUNT, val) +#define bfin_read_MDMA_D1_Y_MODIFY() bfin_read16(MDMA_D1_Y_MODIFY) +#define bfin_write_MDMA_D1_Y_MODIFY(val) bfin_write16(MDMA_D1_Y_MODIFY, val) +#define bfin_read_MDMA_D1_CURR_DESC_PTR() bfin_readPTR(MDMA_D1_CURR_DESC_PTR) +#define bfin_write_MDMA_D1_CURR_DESC_PTR(val) bfin_writePTR(MDMA_D1_CURR_DESC_PTR, val) +#define bfin_read_MDMA_D1_CURR_ADDR() bfin_readPTR(MDMA_D1_CURR_ADDR) +#define bfin_write_MDMA_D1_CURR_ADDR(val) bfin_writePTR(MDMA_D1_CURR_ADDR, val) +#define bfin_read_MDMA_D1_IRQ_STATUS() bfin_read16(MDMA_D1_IRQ_STATUS) +#define bfin_write_MDMA_D1_IRQ_STATUS(val) bfin_write16(MDMA_D1_IRQ_STATUS, val) +#define bfin_read_MDMA_D1_PERIPHERAL_MAP() bfin_read16(MDMA_D1_PERIPHERAL_MAP) +#define bfin_write_MDMA_D1_PERIPHERAL_MAP(val) bfin_write16(MDMA_D1_PERIPHERAL_MAP, val) +#define bfin_read_MDMA_D1_CURR_X_COUNT() bfin_read16(MDMA_D1_CURR_X_COUNT) +#define bfin_write_MDMA_D1_CURR_X_COUNT(val) bfin_write16(MDMA_D1_CURR_X_COUNT, val) +#define bfin_read_MDMA_D1_CURR_Y_COUNT() bfin_read16(MDMA_D1_CURR_Y_COUNT) +#define bfin_write_MDMA_D1_CURR_Y_COUNT(val) bfin_write16(MDMA_D1_CURR_Y_COUNT, val) +#define bfin_read_PPI_CONTROL() bfin_read16(PPI_CONTROL) +#define bfin_write_PPI_CONTROL(val) bfin_write16(PPI_CONTROL, val) +#define bfin_read_PPI_STATUS() bfin_read16(PPI_STATUS) +#define bfin_write_PPI_STATUS(val) bfin_write16(PPI_STATUS, val) +#define bfin_read_PPI_COUNT() bfin_read16(PPI_COUNT) +#define bfin_write_PPI_COUNT(val) bfin_write16(PPI_COUNT, val) +#define bfin_read_PPI_DELAY() bfin_read16(PPI_DELAY) +#define bfin_write_PPI_DELAY(val) bfin_write16(PPI_DELAY, val) +#define bfin_read_PPI_FRAME() bfin_read16(PPI_FRAME) +#define bfin_write_PPI_FRAME(val) bfin_write16(PPI_FRAME, val) +#define bfin_read_TWI_CLKDIV() bfin_read16(TWI_CLKDIV) +#define bfin_write_TWI_CLKDIV(val) bfin_write16(TWI_CLKDIV, val) +#define bfin_read_TWI_CONTROL() bfin_read16(TWI_CONTROL) +#define bfin_write_TWI_CONTROL(val) bfin_write16(TWI_CONTROL, val) +#define bfin_read_TWI_SLAVE_CTL() bfin_read16(TWI_SLAVE_CTL) +#define bfin_write_TWI_SLAVE_CTL(val) bfin_write16(TWI_SLAVE_CTL, val) +#define bfin_read_TWI_SLAVE_STAT() bfin_read16(TWI_SLAVE_STAT) +#define bfin_write_TWI_SLAVE_STAT(val) bfin_write16(TWI_SLAVE_STAT, val) +#define bfin_read_TWI_SLAVE_ADDR() bfin_read16(TWI_SLAVE_ADDR) +#define bfin_write_TWI_SLAVE_ADDR(val) bfin_write16(TWI_SLAVE_ADDR, val) +#define bfin_read_TWI_MASTER_CTL() bfin_read16(TWI_MASTER_CTL) +#define bfin_write_TWI_MASTER_CTL(val) bfin_write16(TWI_MASTER_CTL, val) +#define bfin_read_TWI_MASTER_STAT() bfin_read16(TWI_MASTER_STAT) +#define bfin_write_TWI_MASTER_STAT(val) bfin_write16(TWI_MASTER_STAT, val) +#define bfin_read_TWI_MASTER_ADDR() bfin_read16(TWI_MASTER_ADDR) +#define bfin_write_TWI_MASTER_ADDR(val) bfin_write16(TWI_MASTER_ADDR, val) +#define bfin_read_TWI_INT_STAT() bfin_read16(TWI_INT_STAT) +#define bfin_write_TWI_INT_STAT(val) bfin_write16(TWI_INT_STAT, val) +#define bfin_read_TWI_INT_MASK() bfin_read16(TWI_INT_MASK) +#define bfin_write_TWI_INT_MASK(val) bfin_write16(TWI_INT_MASK, val) +#define bfin_read_TWI_FIFO_CTL() bfin_read16(TWI_FIFO_CTL) +#define bfin_write_TWI_FIFO_CTL(val) bfin_write16(TWI_FIFO_CTL, val) +#define bfin_read_TWI_FIFO_STAT() bfin_read16(TWI_FIFO_STAT) +#define bfin_write_TWI_FIFO_STAT(val) bfin_write16(TWI_FIFO_STAT, val) +#define bfin_read_TWI_XMT_DATA8() bfin_read16(TWI_XMT_DATA8) +#define bfin_write_TWI_XMT_DATA8(val) bfin_write16(TWI_XMT_DATA8, val) +#define bfin_read_TWI_XMT_DATA16() bfin_read16(TWI_XMT_DATA16) +#define bfin_write_TWI_XMT_DATA16(val) bfin_write16(TWI_XMT_DATA16, val) +#define bfin_read_TWI_RCV_DATA8() bfin_read16(TWI_RCV_DATA8) +#define bfin_write_TWI_RCV_DATA8(val) bfin_write16(TWI_RCV_DATA8, val) +#define bfin_read_TWI_RCV_DATA16() bfin_read16(TWI_RCV_DATA16) +#define bfin_write_TWI_RCV_DATA16(val) bfin_write16(TWI_RCV_DATA16, val) +#define bfin_read_PORTGIO() bfin_read16(PORTGIO) +#define bfin_write_PORTGIO(val) bfin_write16(PORTGIO, val) +#define bfin_read_PORTGIO_CLEAR() bfin_read16(PORTGIO_CLEAR) +#define bfin_write_PORTGIO_CLEAR(val) bfin_write16(PORTGIO_CLEAR, val) +#define bfin_read_PORTGIO_SET() bfin_read16(PORTGIO_SET) +#define bfin_write_PORTGIO_SET(val) bfin_write16(PORTGIO_SET, val) +#define bfin_read_PORTGIO_TOGGLE() bfin_read16(PORTGIO_TOGGLE) +#define bfin_write_PORTGIO_TOGGLE(val) bfin_write16(PORTGIO_TOGGLE, val) +#define bfin_read_PORTGIO_MASKA() bfin_read16(PORTGIO_MASKA) +#define bfin_write_PORTGIO_MASKA(val) bfin_write16(PORTGIO_MASKA, val) +#define bfin_read_PORTGIO_MASKA_CLEAR() bfin_read16(PORTGIO_MASKA_CLEAR) +#define bfin_write_PORTGIO_MASKA_CLEAR(val) bfin_write16(PORTGIO_MASKA_CLEAR, val) +#define bfin_read_PORTGIO_MASKA_SET() bfin_read16(PORTGIO_MASKA_SET) +#define bfin_write_PORTGIO_MASKA_SET(val) bfin_write16(PORTGIO_MASKA_SET, val) +#define bfin_read_PORTGIO_MASKA_TOGGLE() bfin_read16(PORTGIO_MASKA_TOGGLE) +#define bfin_write_PORTGIO_MASKA_TOGGLE(val) bfin_write16(PORTGIO_MASKA_TOGGLE, val) +#define bfin_read_PORTGIO_MASKB() bfin_read16(PORTGIO_MASKB) +#define bfin_write_PORTGIO_MASKB(val) bfin_write16(PORTGIO_MASKB, val) +#define bfin_read_PORTGIO_MASKB_CLEAR() bfin_read16(PORTGIO_MASKB_CLEAR) +#define bfin_write_PORTGIO_MASKB_CLEAR(val) bfin_write16(PORTGIO_MASKB_CLEAR, val) +#define bfin_read_PORTGIO_MASKB_SET() bfin_read16(PORTGIO_MASKB_SET) +#define bfin_write_PORTGIO_MASKB_SET(val) bfin_write16(PORTGIO_MASKB_SET, val) +#define bfin_read_PORTGIO_MASKB_TOGGLE() bfin_read16(PORTGIO_MASKB_TOGGLE) +#define bfin_write_PORTGIO_MASKB_TOGGLE(val) bfin_write16(PORTGIO_MASKB_TOGGLE, val) +#define bfin_read_PORTGIO_DIR() bfin_read16(PORTGIO_DIR) +#define bfin_write_PORTGIO_DIR(val) bfin_write16(PORTGIO_DIR, val) +#define bfin_read_PORTGIO_POLAR() bfin_read16(PORTGIO_POLAR) +#define bfin_write_PORTGIO_POLAR(val) bfin_write16(PORTGIO_POLAR, val) +#define bfin_read_PORTGIO_EDGE() bfin_read16(PORTGIO_EDGE) +#define bfin_write_PORTGIO_EDGE(val) bfin_write16(PORTGIO_EDGE, val) +#define bfin_read_PORTGIO_BOTH() bfin_read16(PORTGIO_BOTH) +#define bfin_write_PORTGIO_BOTH(val) bfin_write16(PORTGIO_BOTH, val) +#define bfin_read_PORTGIO_INEN() bfin_read16(PORTGIO_INEN) +#define bfin_write_PORTGIO_INEN(val) bfin_write16(PORTGIO_INEN, val) +#define bfin_read_PORTHIO() bfin_read16(PORTHIO) +#define bfin_write_PORTHIO(val) bfin_write16(PORTHIO, val) +#define bfin_read_PORTHIO_CLEAR() bfin_read16(PORTHIO_CLEAR) +#define bfin_write_PORTHIO_CLEAR(val) bfin_write16(PORTHIO_CLEAR, val) +#define bfin_read_PORTHIO_SET() bfin_read16(PORTHIO_SET) +#define bfin_write_PORTHIO_SET(val) bfin_write16(PORTHIO_SET, val) +#define bfin_read_PORTHIO_TOGGLE() bfin_read16(PORTHIO_TOGGLE) +#define bfin_write_PORTHIO_TOGGLE(val) bfin_write16(PORTHIO_TOGGLE, val) +#define bfin_read_PORTHIO_MASKA() bfin_read16(PORTHIO_MASKA) +#define bfin_write_PORTHIO_MASKA(val) bfin_write16(PORTHIO_MASKA, val) +#define bfin_read_PORTHIO_MASKA_CLEAR() bfin_read16(PORTHIO_MASKA_CLEAR) +#define bfin_write_PORTHIO_MASKA_CLEAR(val) bfin_write16(PORTHIO_MASKA_CLEAR, val) +#define bfin_read_PORTHIO_MASKA_SET() bfin_read16(PORTHIO_MASKA_SET) +#define bfin_write_PORTHIO_MASKA_SET(val) bfin_write16(PORTHIO_MASKA_SET, val) +#define bfin_read_PORTHIO_MASKA_TOGGLE() bfin_read16(PORTHIO_MASKA_TOGGLE) +#define bfin_write_PORTHIO_MASKA_TOGGLE(val) bfin_write16(PORTHIO_MASKA_TOGGLE, val) +#define bfin_read_PORTHIO_MASKB() bfin_read16(PORTHIO_MASKB) +#define bfin_write_PORTHIO_MASKB(val) bfin_write16(PORTHIO_MASKB, val) +#define bfin_read_PORTHIO_MASKB_CLEAR() bfin_read16(PORTHIO_MASKB_CLEAR) +#define bfin_write_PORTHIO_MASKB_CLEAR(val) bfin_write16(PORTHIO_MASKB_CLEAR, val) +#define bfin_read_PORTHIO_MASKB_SET() bfin_read16(PORTHIO_MASKB_SET) +#define bfin_write_PORTHIO_MASKB_SET(val) bfin_write16(PORTHIO_MASKB_SET, val) +#define bfin_read_PORTHIO_MASKB_TOGGLE() bfin_read16(PORTHIO_MASKB_TOGGLE) +#define bfin_write_PORTHIO_MASKB_TOGGLE(val) bfin_write16(PORTHIO_MASKB_TOGGLE, val) +#define bfin_read_PORTHIO_DIR() bfin_read16(PORTHIO_DIR) +#define bfin_write_PORTHIO_DIR(val) bfin_write16(PORTHIO_DIR, val) +#define bfin_read_PORTHIO_POLAR() bfin_read16(PORTHIO_POLAR) +#define bfin_write_PORTHIO_POLAR(val) bfin_write16(PORTHIO_POLAR, val) +#define bfin_read_PORTHIO_EDGE() bfin_read16(PORTHIO_EDGE) +#define bfin_write_PORTHIO_EDGE(val) bfin_write16(PORTHIO_EDGE, val) +#define bfin_read_PORTHIO_BOTH() bfin_read16(PORTHIO_BOTH) +#define bfin_write_PORTHIO_BOTH(val) bfin_write16(PORTHIO_BOTH, val) +#define bfin_read_PORTHIO_INEN() bfin_read16(PORTHIO_INEN) +#define bfin_write_PORTHIO_INEN(val) bfin_write16(PORTHIO_INEN, val) +#define bfin_read_UART1_THR() bfin_read16(UART1_THR) +#define bfin_write_UART1_THR(val) bfin_write16(UART1_THR, val) +#define bfin_read_UART1_RBR() bfin_read16(UART1_RBR) +#define bfin_write_UART1_RBR(val) bfin_write16(UART1_RBR, val) +#define bfin_read_UART1_DLL() bfin_read16(UART1_DLL) +#define bfin_write_UART1_DLL(val) bfin_write16(UART1_DLL, val) +#define bfin_read_UART1_IER() bfin_read16(UART1_IER) +#define bfin_write_UART1_IER(val) bfin_write16(UART1_IER, val) +#define bfin_read_UART1_DLH() bfin_read16(UART1_DLH) +#define bfin_write_UART1_DLH(val) bfin_write16(UART1_DLH, val) +#define bfin_read_UART1_IIR() bfin_read16(UART1_IIR) +#define bfin_write_UART1_IIR(val) bfin_write16(UART1_IIR, val) +#define bfin_read_UART1_LCR() bfin_read16(UART1_LCR) +#define bfin_write_UART1_LCR(val) bfin_write16(UART1_LCR, val) +#define bfin_read_UART1_MCR() bfin_read16(UART1_MCR) +#define bfin_write_UART1_MCR(val) bfin_write16(UART1_MCR, val) +#define bfin_read_UART1_LSR() bfin_read16(UART1_LSR) +#define bfin_write_UART1_LSR(val) bfin_write16(UART1_LSR, val) +#define bfin_read_UART1_MSR() bfin_read16(UART1_MSR) +#define bfin_write_UART1_MSR(val) bfin_write16(UART1_MSR, val) +#define bfin_read_UART1_SCR() bfin_read16(UART1_SCR) +#define bfin_write_UART1_SCR(val) bfin_write16(UART1_SCR, val) +#define bfin_read_UART1_GCTL() bfin_read16(UART1_GCTL) +#define bfin_write_UART1_GCTL(val) bfin_write16(UART1_GCTL, val) +#define bfin_read_CAN_MC1() bfin_read16(CAN_MC1) +#define bfin_write_CAN_MC1(val) bfin_write16(CAN_MC1, val) +#define bfin_read_CAN_MD1() bfin_read16(CAN_MD1) +#define bfin_write_CAN_MD1(val) bfin_write16(CAN_MD1, val) +#define bfin_read_CAN_TRS1() bfin_read16(CAN_TRS1) +#define bfin_write_CAN_TRS1(val) bfin_write16(CAN_TRS1, val) +#define bfin_read_CAN_TRR1() bfin_read16(CAN_TRR1) +#define bfin_write_CAN_TRR1(val) bfin_write16(CAN_TRR1, val) +#define bfin_read_CAN_TA1() bfin_read16(CAN_TA1) +#define bfin_write_CAN_TA1(val) bfin_write16(CAN_TA1, val) +#define bfin_read_CAN_AA1() bfin_read16(CAN_AA1) +#define bfin_write_CAN_AA1(val) bfin_write16(CAN_AA1, val) +#define bfin_read_CAN_RMP1() bfin_read16(CAN_RMP1) +#define bfin_write_CAN_RMP1(val) bfin_write16(CAN_RMP1, val) +#define bfin_read_CAN_RML1() bfin_read16(CAN_RML1) +#define bfin_write_CAN_RML1(val) bfin_write16(CAN_RML1, val) +#define bfin_read_CAN_MBTIF1() bfin_read16(CAN_MBTIF1) +#define bfin_write_CAN_MBTIF1(val) bfin_write16(CAN_MBTIF1, val) +#define bfin_read_CAN_MBRIF1() bfin_read16(CAN_MBRIF1) +#define bfin_write_CAN_MBRIF1(val) bfin_write16(CAN_MBRIF1, val) +#define bfin_read_CAN_MBIM1() bfin_read16(CAN_MBIM1) +#define bfin_write_CAN_MBIM1(val) bfin_write16(CAN_MBIM1, val) +#define bfin_read_CAN_RFH1() bfin_read16(CAN_RFH1) +#define bfin_write_CAN_RFH1(val) bfin_write16(CAN_RFH1, val) +#define bfin_read_CAN_OPSS1() bfin_read16(CAN_OPSS1) +#define bfin_write_CAN_OPSS1(val) bfin_write16(CAN_OPSS1, val) +#define bfin_read_CAN_MC2() bfin_read16(CAN_MC2) +#define bfin_write_CAN_MC2(val) bfin_write16(CAN_MC2, val) +#define bfin_read_CAN_MD2() bfin_read16(CAN_MD2) +#define bfin_write_CAN_MD2(val) bfin_write16(CAN_MD2, val) +#define bfin_read_CAN_TRS2() bfin_read16(CAN_TRS2) +#define bfin_write_CAN_TRS2(val) bfin_write16(CAN_TRS2, val) +#define bfin_read_CAN_TRR2() bfin_read16(CAN_TRR2) +#define bfin_write_CAN_TRR2(val) bfin_write16(CAN_TRR2, val) +#define bfin_read_CAN_TA2() bfin_read16(CAN_TA2) +#define bfin_write_CAN_TA2(val) bfin_write16(CAN_TA2, val) +#define bfin_read_CAN_AA2() bfin_read16(CAN_AA2) +#define bfin_write_CAN_AA2(val) bfin_write16(CAN_AA2, val) +#define bfin_read_CAN_RMP2() bfin_read16(CAN_RMP2) +#define bfin_write_CAN_RMP2(val) bfin_write16(CAN_RMP2, val) +#define bfin_read_CAN_RML2() bfin_read16(CAN_RML2) +#define bfin_write_CAN_RML2(val) bfin_write16(CAN_RML2, val) +#define bfin_read_CAN_MBTIF2() bfin_read16(CAN_MBTIF2) +#define bfin_write_CAN_MBTIF2(val) bfin_write16(CAN_MBTIF2, val) +#define bfin_read_CAN_MBRIF2() bfin_read16(CAN_MBRIF2) +#define bfin_write_CAN_MBRIF2(val) bfin_write16(CAN_MBRIF2, val) +#define bfin_read_CAN_MBIM2() bfin_read16(CAN_MBIM2) +#define bfin_write_CAN_MBIM2(val) bfin_write16(CAN_MBIM2, val) +#define bfin_read_CAN_RFH2() bfin_read16(CAN_RFH2) +#define bfin_write_CAN_RFH2(val) bfin_write16(CAN_RFH2, val) +#define bfin_read_CAN_OPSS2() bfin_read16(CAN_OPSS2) +#define bfin_write_CAN_OPSS2(val) bfin_write16(CAN_OPSS2, val) +#define bfin_read_CAN_CLOCK() bfin_read16(CAN_CLOCK) +#define bfin_write_CAN_CLOCK(val) bfin_write16(CAN_CLOCK, val) +#define bfin_read_CAN_TIMING() bfin_read16(CAN_TIMING) +#define bfin_write_CAN_TIMING(val) bfin_write16(CAN_TIMING, val) +#define bfin_read_CAN_DEBUG() bfin_read16(CAN_DEBUG) +#define bfin_write_CAN_DEBUG(val) bfin_write16(CAN_DEBUG, val) +#define bfin_read_CAN_STATUS() bfin_read16(CAN_STATUS) +#define bfin_write_CAN_STATUS(val) bfin_write16(CAN_STATUS, val) +#define bfin_read_CAN_CEC() bfin_read16(CAN_CEC) +#define bfin_write_CAN_CEC(val) bfin_write16(CAN_CEC, val) +#define bfin_read_CAN_GIS() bfin_read16(CAN_GIS) +#define bfin_write_CAN_GIS(val) bfin_write16(CAN_GIS, val) +#define bfin_read_CAN_GIM() bfin_read16(CAN_GIM) +#define bfin_write_CAN_GIM(val) bfin_write16(CAN_GIM, val) +#define bfin_read_CAN_GIF() bfin_read16(CAN_GIF) +#define bfin_write_CAN_GIF(val) bfin_write16(CAN_GIF, val) +#define bfin_read_CAN_CONTROL() bfin_read16(CAN_CONTROL) +#define bfin_write_CAN_CONTROL(val) bfin_write16(CAN_CONTROL, val) +#define bfin_read_CAN_INTR() bfin_read16(CAN_INTR) +#define bfin_write_CAN_INTR(val) bfin_write16(CAN_INTR, val) +#define bfin_read_CAN_VERSION() bfin_read16(CAN_VERSION) +#define bfin_write_CAN_VERSION(val) bfin_write16(CAN_VERSION, val) +#define bfin_read_CAN_MBTD() bfin_read16(CAN_MBTD) +#define bfin_write_CAN_MBTD(val) bfin_write16(CAN_MBTD, val) +#define bfin_read_CAN_EWR() bfin_read16(CAN_EWR) +#define bfin_write_CAN_EWR(val) bfin_write16(CAN_EWR, val) +#define bfin_read_CAN_ESR() bfin_read16(CAN_ESR) +#define bfin_write_CAN_ESR(val) bfin_write16(CAN_ESR, val) +#define bfin_read_CAN_UCREG() bfin_read16(CAN_UCREG) +#define bfin_write_CAN_UCREG(val) bfin_write16(CAN_UCREG, val) +#define bfin_read_CAN_UCCNT() bfin_read16(CAN_UCCNT) +#define bfin_write_CAN_UCCNT(val) bfin_write16(CAN_UCCNT, val) +#define bfin_read_CAN_UCRC() bfin_read16(CAN_UCRC) +#define bfin_write_CAN_UCRC(val) bfin_write16(CAN_UCRC, val) +#define bfin_read_CAN_UCCNF() bfin_read16(CAN_UCCNF) +#define bfin_write_CAN_UCCNF(val) bfin_write16(CAN_UCCNF, val) +#define bfin_read_CAN_VERSION2() bfin_read16(CAN_VERSION2) +#define bfin_write_CAN_VERSION2(val) bfin_write16(CAN_VERSION2, val) +#define bfin_read_CAN_AM00L() bfin_read16(CAN_AM00L) +#define bfin_write_CAN_AM00L(val) bfin_write16(CAN_AM00L, val) +#define bfin_read_CAN_AM00H() bfin_read16(CAN_AM00H) +#define bfin_write_CAN_AM00H(val) bfin_write16(CAN_AM00H, val) +#define bfin_read_CAN_AM01L() bfin_read16(CAN_AM01L) +#define bfin_write_CAN_AM01L(val) bfin_write16(CAN_AM01L, val) +#define bfin_read_CAN_AM01H() bfin_read16(CAN_AM01H) +#define bfin_write_CAN_AM01H(val) bfin_write16(CAN_AM01H, val) +#define bfin_read_CAN_AM02L() bfin_read16(CAN_AM02L) +#define bfin_write_CAN_AM02L(val) bfin_write16(CAN_AM02L, val) +#define bfin_read_CAN_AM02H() bfin_read16(CAN_AM02H) +#define bfin_write_CAN_AM02H(val) bfin_write16(CAN_AM02H, val) +#define bfin_read_CAN_AM03L() bfin_read16(CAN_AM03L) +#define bfin_write_CAN_AM03L(val) bfin_write16(CAN_AM03L, val) +#define bfin_read_CAN_AM03H() bfin_read16(CAN_AM03H) +#define bfin_write_CAN_AM03H(val) bfin_write16(CAN_AM03H, val) +#define bfin_read_CAN_AM04L() bfin_read16(CAN_AM04L) +#define bfin_write_CAN_AM04L(val) bfin_write16(CAN_AM04L, val) +#define bfin_read_CAN_AM04H() bfin_read16(CAN_AM04H) +#define bfin_write_CAN_AM04H(val) bfin_write16(CAN_AM04H, val) +#define bfin_read_CAN_AM05L() bfin_read16(CAN_AM05L) +#define bfin_write_CAN_AM05L(val) bfin_write16(CAN_AM05L, val) +#define bfin_read_CAN_AM05H() bfin_read16(CAN_AM05H) +#define bfin_write_CAN_AM05H(val) bfin_write16(CAN_AM05H, val) +#define bfin_read_CAN_AM06L() bfin_read16(CAN_AM06L) +#define bfin_write_CAN_AM06L(val) bfin_write16(CAN_AM06L, val) +#define bfin_read_CAN_AM06H() bfin_read16(CAN_AM06H) +#define bfin_write_CAN_AM06H(val) bfin_write16(CAN_AM06H, val) +#define bfin_read_CAN_AM07L() bfin_read16(CAN_AM07L) +#define bfin_write_CAN_AM07L(val) bfin_write16(CAN_AM07L, val) +#define bfin_read_CAN_AM07H() bfin_read16(CAN_AM07H) +#define bfin_write_CAN_AM07H(val) bfin_write16(CAN_AM07H, val) +#define bfin_read_CAN_AM08L() bfin_read16(CAN_AM08L) +#define bfin_write_CAN_AM08L(val) bfin_write16(CAN_AM08L, val) +#define bfin_read_CAN_AM08H() bfin_read16(CAN_AM08H) +#define bfin_write_CAN_AM08H(val) bfin_write16(CAN_AM08H, val) +#define bfin_read_CAN_AM09L() bfin_read16(CAN_AM09L) +#define bfin_write_CAN_AM09L(val) bfin_write16(CAN_AM09L, val) +#define bfin_read_CAN_AM09H() bfin_read16(CAN_AM09H) +#define bfin_write_CAN_AM09H(val) bfin_write16(CAN_AM09H, val) +#define bfin_read_CAN_AM10L() bfin_read16(CAN_AM10L) +#define bfin_write_CAN_AM10L(val) bfin_write16(CAN_AM10L, val) +#define bfin_read_CAN_AM10H() bfin_read16(CAN_AM10H) +#define bfin_write_CAN_AM10H(val) bfin_write16(CAN_AM10H, val) +#define bfin_read_CAN_AM11L() bfin_read16(CAN_AM11L) +#define bfin_write_CAN_AM11L(val) bfin_write16(CAN_AM11L, val) +#define bfin_read_CAN_AM11H() bfin_read16(CAN_AM11H) +#define bfin_write_CAN_AM11H(val) bfin_write16(CAN_AM11H, val) +#define bfin_read_CAN_AM12L() bfin_read16(CAN_AM12L) +#define bfin_write_CAN_AM12L(val) bfin_write16(CAN_AM12L, val) +#define bfin_read_CAN_AM12H() bfin_read16(CAN_AM12H) +#define bfin_write_CAN_AM12H(val) bfin_write16(CAN_AM12H, val) +#define bfin_read_CAN_AM13L() bfin_read16(CAN_AM13L) +#define bfin_write_CAN_AM13L(val) bfin_write16(CAN_AM13L, val) +#define bfin_read_CAN_AM13H() bfin_read16(CAN_AM13H) +#define bfin_write_CAN_AM13H(val) bfin_write16(CAN_AM13H, val) +#define bfin_read_CAN_AM14L() bfin_read16(CAN_AM14L) +#define bfin_write_CAN_AM14L(val) bfin_write16(CAN_AM14L, val) +#define bfin_read_CAN_AM14H() bfin_read16(CAN_AM14H) +#define bfin_write_CAN_AM14H(val) bfin_write16(CAN_AM14H, val) +#define bfin_read_CAN_AM15L() bfin_read16(CAN_AM15L) +#define bfin_write_CAN_AM15L(val) bfin_write16(CAN_AM15L, val) +#define bfin_read_CAN_AM15H() bfin_read16(CAN_AM15H) +#define bfin_write_CAN_AM15H(val) bfin_write16(CAN_AM15H, val) +#define bfin_read_CAN_AM16L() bfin_read16(CAN_AM16L) +#define bfin_write_CAN_AM16L(val) bfin_write16(CAN_AM16L, val) +#define bfin_read_CAN_AM16H() bfin_read16(CAN_AM16H) +#define bfin_write_CAN_AM16H(val) bfin_write16(CAN_AM16H, val) +#define bfin_read_CAN_AM17L() bfin_read16(CAN_AM17L) +#define bfin_write_CAN_AM17L(val) bfin_write16(CAN_AM17L, val) +#define bfin_read_CAN_AM17H() bfin_read16(CAN_AM17H) +#define bfin_write_CAN_AM17H(val) bfin_write16(CAN_AM17H, val) +#define bfin_read_CAN_AM18L() bfin_read16(CAN_AM18L) +#define bfin_write_CAN_AM18L(val) bfin_write16(CAN_AM18L, val) +#define bfin_read_CAN_AM18H() bfin_read16(CAN_AM18H) +#define bfin_write_CAN_AM18H(val) bfin_write16(CAN_AM18H, val) +#define bfin_read_CAN_AM19L() bfin_read16(CAN_AM19L) +#define bfin_write_CAN_AM19L(val) bfin_write16(CAN_AM19L, val) +#define bfin_read_CAN_AM19H() bfin_read16(CAN_AM19H) +#define bfin_write_CAN_AM19H(val) bfin_write16(CAN_AM19H, val) +#define bfin_read_CAN_AM20L() bfin_read16(CAN_AM20L) +#define bfin_write_CAN_AM20L(val) bfin_write16(CAN_AM20L, val) +#define bfin_read_CAN_AM20H() bfin_read16(CAN_AM20H) +#define bfin_write_CAN_AM20H(val) bfin_write16(CAN_AM20H, val) +#define bfin_read_CAN_AM21L() bfin_read16(CAN_AM21L) +#define bfin_write_CAN_AM21L(val) bfin_write16(CAN_AM21L, val) +#define bfin_read_CAN_AM21H() bfin_read16(CAN_AM21H) +#define bfin_write_CAN_AM21H(val) bfin_write16(CAN_AM21H, val) +#define bfin_read_CAN_AM22L() bfin_read16(CAN_AM22L) +#define bfin_write_CAN_AM22L(val) bfin_write16(CAN_AM22L, val) +#define bfin_read_CAN_AM22H() bfin_read16(CAN_AM22H) +#define bfin_write_CAN_AM22H(val) bfin_write16(CAN_AM22H, val) +#define bfin_read_CAN_AM23L() bfin_read16(CAN_AM23L) +#define bfin_write_CAN_AM23L(val) bfin_write16(CAN_AM23L, val) +#define bfin_read_CAN_AM23H() bfin_read16(CAN_AM23H) +#define bfin_write_CAN_AM23H(val) bfin_write16(CAN_AM23H, val) +#define bfin_read_CAN_AM24L() bfin_read16(CAN_AM24L) +#define bfin_write_CAN_AM24L(val) bfin_write16(CAN_AM24L, val) +#define bfin_read_CAN_AM24H() bfin_read16(CAN_AM24H) +#define bfin_write_CAN_AM24H(val) bfin_write16(CAN_AM24H, val) +#define bfin_read_CAN_AM25L() bfin_read16(CAN_AM25L) +#define bfin_write_CAN_AM25L(val) bfin_write16(CAN_AM25L, val) +#define bfin_read_CAN_AM25H() bfin_read16(CAN_AM25H) +#define bfin_write_CAN_AM25H(val) bfin_write16(CAN_AM25H, val) +#define bfin_read_CAN_AM26L() bfin_read16(CAN_AM26L) +#define bfin_write_CAN_AM26L(val) bfin_write16(CAN_AM26L, val) +#define bfin_read_CAN_AM26H() bfin_read16(CAN_AM26H) +#define bfin_write_CAN_AM26H(val) bfin_write16(CAN_AM26H, val) +#define bfin_read_CAN_AM27L() bfin_read16(CAN_AM27L) +#define bfin_write_CAN_AM27L(val) bfin_write16(CAN_AM27L, val) +#define bfin_read_CAN_AM27H() bfin_read16(CAN_AM27H) +#define bfin_write_CAN_AM27H(val) bfin_write16(CAN_AM27H, val) +#define bfin_read_CAN_AM28L() bfin_read16(CAN_AM28L) +#define bfin_write_CAN_AM28L(val) bfin_write16(CAN_AM28L, val) +#define bfin_read_CAN_AM28H() bfin_read16(CAN_AM28H) +#define bfin_write_CAN_AM28H(val) bfin_write16(CAN_AM28H, val) +#define bfin_read_CAN_AM29L() bfin_read16(CAN_AM29L) +#define bfin_write_CAN_AM29L(val) bfin_write16(CAN_AM29L, val) +#define bfin_read_CAN_AM29H() bfin_read16(CAN_AM29H) +#define bfin_write_CAN_AM29H(val) bfin_write16(CAN_AM29H, val) +#define bfin_read_CAN_AM30L() bfin_read16(CAN_AM30L) +#define bfin_write_CAN_AM30L(val) bfin_write16(CAN_AM30L, val) +#define bfin_read_CAN_AM30H() bfin_read16(CAN_AM30H) +#define bfin_write_CAN_AM30H(val) bfin_write16(CAN_AM30H, val) +#define bfin_read_CAN_AM31L() bfin_read16(CAN_AM31L) +#define bfin_write_CAN_AM31L(val) bfin_write16(CAN_AM31L, val) +#define bfin_read_CAN_AM31H() bfin_read16(CAN_AM31H) +#define bfin_write_CAN_AM31H(val) bfin_write16(CAN_AM31H, val) +#define bfin_read_CAN_MB00_DATA0() bfin_read16(CAN_MB00_DATA0) +#define bfin_write_CAN_MB00_DATA0(val) bfin_write16(CAN_MB00_DATA0, val) +#define bfin_read_CAN_MB00_DATA1() bfin_read16(CAN_MB00_DATA1) +#define bfin_write_CAN_MB00_DATA1(val) bfin_write16(CAN_MB00_DATA1, val) +#define bfin_read_CAN_MB00_DATA2() bfin_read16(CAN_MB00_DATA2) +#define bfin_write_CAN_MB00_DATA2(val) bfin_write16(CAN_MB00_DATA2, val) +#define bfin_read_CAN_MB00_DATA3() bfin_read16(CAN_MB00_DATA3) +#define bfin_write_CAN_MB00_DATA3(val) bfin_write16(CAN_MB00_DATA3, val) +#define bfin_read_CAN_MB00_LENGTH() bfin_read16(CAN_MB00_LENGTH) +#define bfin_write_CAN_MB00_LENGTH(val) bfin_write16(CAN_MB00_LENGTH, val) +#define bfin_read_CAN_MB00_TIMESTAMP() bfin_read16(CAN_MB00_TIMESTAMP) +#define bfin_write_CAN_MB00_TIMESTAMP(val) bfin_write16(CAN_MB00_TIMESTAMP, val) +#define bfin_read_CAN_MB00_ID0() bfin_read16(CAN_MB00_ID0) +#define bfin_write_CAN_MB00_ID0(val) bfin_write16(CAN_MB00_ID0, val) +#define bfin_read_CAN_MB00_ID1() bfin_read16(CAN_MB00_ID1) +#define bfin_write_CAN_MB00_ID1(val) bfin_write16(CAN_MB00_ID1, val) +#define bfin_read_CAN_MB01_DATA0() bfin_read16(CAN_MB01_DATA0) +#define bfin_write_CAN_MB01_DATA0(val) bfin_write16(CAN_MB01_DATA0, val) +#define bfin_read_CAN_MB01_DATA1() bfin_read16(CAN_MB01_DATA1) +#define bfin_write_CAN_MB01_DATA1(val) bfin_write16(CAN_MB01_DATA1, val) +#define bfin_read_CAN_MB01_DATA2() bfin_read16(CAN_MB01_DATA2) +#define bfin_write_CAN_MB01_DATA2(val) bfin_write16(CAN_MB01_DATA2, val) +#define bfin_read_CAN_MB01_DATA3() bfin_read16(CAN_MB01_DATA3) +#define bfin_write_CAN_MB01_DATA3(val) bfin_write16(CAN_MB01_DATA3, val) +#define bfin_read_CAN_MB01_LENGTH() bfin_read16(CAN_MB01_LENGTH) +#define bfin_write_CAN_MB01_LENGTH(val) bfin_write16(CAN_MB01_LENGTH, val) +#define bfin_read_CAN_MB01_TIMESTAMP() bfin_read16(CAN_MB01_TIMESTAMP) +#define bfin_write_CAN_MB01_TIMESTAMP(val) bfin_write16(CAN_MB01_TIMESTAMP, val) +#define bfin_read_CAN_MB01_ID0() bfin_read16(CAN_MB01_ID0) +#define bfin_write_CAN_MB01_ID0(val) bfin_write16(CAN_MB01_ID0, val) +#define bfin_read_CAN_MB01_ID1() bfin_read16(CAN_MB01_ID1) +#define bfin_write_CAN_MB01_ID1(val) bfin_write16(CAN_MB01_ID1, val) +#define bfin_read_CAN_MB02_DATA0() bfin_read16(CAN_MB02_DATA0) +#define bfin_write_CAN_MB02_DATA0(val) bfin_write16(CAN_MB02_DATA0, val) +#define bfin_read_CAN_MB02_DATA1() bfin_read16(CAN_MB02_DATA1) +#define bfin_write_CAN_MB02_DATA1(val) bfin_write16(CAN_MB02_DATA1, val) +#define bfin_read_CAN_MB02_DATA2() bfin_read16(CAN_MB02_DATA2) +#define bfin_write_CAN_MB02_DATA2(val) bfin_write16(CAN_MB02_DATA2, val) +#define bfin_read_CAN_MB02_DATA3() bfin_read16(CAN_MB02_DATA3) +#define bfin_write_CAN_MB02_DATA3(val) bfin_write16(CAN_MB02_DATA3, val) +#define bfin_read_CAN_MB02_LENGTH() bfin_read16(CAN_MB02_LENGTH) +#define bfin_write_CAN_MB02_LENGTH(val) bfin_write16(CAN_MB02_LENGTH, val) +#define bfin_read_CAN_MB02_TIMESTAMP() bfin_read16(CAN_MB02_TIMESTAMP) +#define bfin_write_CAN_MB02_TIMESTAMP(val) bfin_write16(CAN_MB02_TIMESTAMP, val) +#define bfin_read_CAN_MB02_ID0() bfin_read16(CAN_MB02_ID0) +#define bfin_write_CAN_MB02_ID0(val) bfin_write16(CAN_MB02_ID0, val) +#define bfin_read_CAN_MB02_ID1() bfin_read16(CAN_MB02_ID1) +#define bfin_write_CAN_MB02_ID1(val) bfin_write16(CAN_MB02_ID1, val) +#define bfin_read_CAN_MB03_DATA0() bfin_read16(CAN_MB03_DATA0) +#define bfin_write_CAN_MB03_DATA0(val) bfin_write16(CAN_MB03_DATA0, val) +#define bfin_read_CAN_MB03_DATA1() bfin_read16(CAN_MB03_DATA1) +#define bfin_write_CAN_MB03_DATA1(val) bfin_write16(CAN_MB03_DATA1, val) +#define bfin_read_CAN_MB03_DATA2() bfin_read16(CAN_MB03_DATA2) +#define bfin_write_CAN_MB03_DATA2(val) bfin_write16(CAN_MB03_DATA2, val) +#define bfin_read_CAN_MB03_DATA3() bfin_read16(CAN_MB03_DATA3) +#define bfin_write_CAN_MB03_DATA3(val) bfin_write16(CAN_MB03_DATA3, val) +#define bfin_read_CAN_MB03_LENGTH() bfin_read16(CAN_MB03_LENGTH) +#define bfin_write_CAN_MB03_LENGTH(val) bfin_write16(CAN_MB03_LENGTH, val) +#define bfin_read_CAN_MB03_TIMESTAMP() bfin_read16(CAN_MB03_TIMESTAMP) +#define bfin_write_CAN_MB03_TIMESTAMP(val) bfin_write16(CAN_MB03_TIMESTAMP, val) +#define bfin_read_CAN_MB03_ID0() bfin_read16(CAN_MB03_ID0) +#define bfin_write_CAN_MB03_ID0(val) bfin_write16(CAN_MB03_ID0, val) +#define bfin_read_CAN_MB03_ID1() bfin_read16(CAN_MB03_ID1) +#define bfin_write_CAN_MB03_ID1(val) bfin_write16(CAN_MB03_ID1, val) +#define bfin_read_CAN_MB04_DATA0() bfin_read16(CAN_MB04_DATA0) +#define bfin_write_CAN_MB04_DATA0(val) bfin_write16(CAN_MB04_DATA0, val) +#define bfin_read_CAN_MB04_DATA1() bfin_read16(CAN_MB04_DATA1) +#define bfin_write_CAN_MB04_DATA1(val) bfin_write16(CAN_MB04_DATA1, val) +#define bfin_read_CAN_MB04_DATA2() bfin_read16(CAN_MB04_DATA2) +#define bfin_write_CAN_MB04_DATA2(val) bfin_write16(CAN_MB04_DATA2, val) +#define bfin_read_CAN_MB04_DATA3() bfin_read16(CAN_MB04_DATA3) +#define bfin_write_CAN_MB04_DATA3(val) bfin_write16(CAN_MB04_DATA3, val) +#define bfin_read_CAN_MB04_LENGTH() bfin_read16(CAN_MB04_LENGTH) +#define bfin_write_CAN_MB04_LENGTH(val) bfin_write16(CAN_MB04_LENGTH, val) +#define bfin_read_CAN_MB04_TIMESTAMP() bfin_read16(CAN_MB04_TIMESTAMP) +#define bfin_write_CAN_MB04_TIMESTAMP(val) bfin_write16(CAN_MB04_TIMESTAMP, val) +#define bfin_read_CAN_MB04_ID0() bfin_read16(CAN_MB04_ID0) +#define bfin_write_CAN_MB04_ID0(val) bfin_write16(CAN_MB04_ID0, val) +#define bfin_read_CAN_MB04_ID1() bfin_read16(CAN_MB04_ID1) +#define bfin_write_CAN_MB04_ID1(val) bfin_write16(CAN_MB04_ID1, val) +#define bfin_read_CAN_MB05_DATA0() bfin_read16(CAN_MB05_DATA0) +#define bfin_write_CAN_MB05_DATA0(val) bfin_write16(CAN_MB05_DATA0, val) +#define bfin_read_CAN_MB05_DATA1() bfin_read16(CAN_MB05_DATA1) +#define bfin_write_CAN_MB05_DATA1(val) bfin_write16(CAN_MB05_DATA1, val) +#define bfin_read_CAN_MB05_DATA2() bfin_read16(CAN_MB05_DATA2) +#define bfin_write_CAN_MB05_DATA2(val) bfin_write16(CAN_MB05_DATA2, val) +#define bfin_read_CAN_MB05_DATA3() bfin_read16(CAN_MB05_DATA3) +#define bfin_write_CAN_MB05_DATA3(val) bfin_write16(CAN_MB05_DATA3, val) +#define bfin_read_CAN_MB05_LENGTH() bfin_read16(CAN_MB05_LENGTH) +#define bfin_write_CAN_MB05_LENGTH(val) bfin_write16(CAN_MB05_LENGTH, val) +#define bfin_read_CAN_MB05_TIMESTAMP() bfin_read16(CAN_MB05_TIMESTAMP) +#define bfin_write_CAN_MB05_TIMESTAMP(val) bfin_write16(CAN_MB05_TIMESTAMP, val) +#define bfin_read_CAN_MB05_ID0() bfin_read16(CAN_MB05_ID0) +#define bfin_write_CAN_MB05_ID0(val) bfin_write16(CAN_MB05_ID0, val) +#define bfin_read_CAN_MB05_ID1() bfin_read16(CAN_MB05_ID1) +#define bfin_write_CAN_MB05_ID1(val) bfin_write16(CAN_MB05_ID1, val) +#define bfin_read_CAN_MB06_DATA0() bfin_read16(CAN_MB06_DATA0) +#define bfin_write_CAN_MB06_DATA0(val) bfin_write16(CAN_MB06_DATA0, val) +#define bfin_read_CAN_MB06_DATA1() bfin_read16(CAN_MB06_DATA1) +#define bfin_write_CAN_MB06_DATA1(val) bfin_write16(CAN_MB06_DATA1, val) +#define bfin_read_CAN_MB06_DATA2() bfin_read16(CAN_MB06_DATA2) +#define bfin_write_CAN_MB06_DATA2(val) bfin_write16(CAN_MB06_DATA2, val) +#define bfin_read_CAN_MB06_DATA3() bfin_read16(CAN_MB06_DATA3) +#define bfin_write_CAN_MB06_DATA3(val) bfin_write16(CAN_MB06_DATA3, val) +#define bfin_read_CAN_MB06_LENGTH() bfin_read16(CAN_MB06_LENGTH) +#define bfin_write_CAN_MB06_LENGTH(val) bfin_write16(CAN_MB06_LENGTH, val) +#define bfin_read_CAN_MB06_TIMESTAMP() bfin_read16(CAN_MB06_TIMESTAMP) +#define bfin_write_CAN_MB06_TIMESTAMP(val) bfin_write16(CAN_MB06_TIMESTAMP, val) +#define bfin_read_CAN_MB06_ID0() bfin_read16(CAN_MB06_ID0) +#define bfin_write_CAN_MB06_ID0(val) bfin_write16(CAN_MB06_ID0, val) +#define bfin_read_CAN_MB06_ID1() bfin_read16(CAN_MB06_ID1) +#define bfin_write_CAN_MB06_ID1(val) bfin_write16(CAN_MB06_ID1, val) +#define bfin_read_CAN_MB07_DATA0() bfin_read16(CAN_MB07_DATA0) +#define bfin_write_CAN_MB07_DATA0(val) bfin_write16(CAN_MB07_DATA0, val) +#define bfin_read_CAN_MB07_DATA1() bfin_read16(CAN_MB07_DATA1) +#define bfin_write_CAN_MB07_DATA1(val) bfin_write16(CAN_MB07_DATA1, val) +#define bfin_read_CAN_MB07_DATA2() bfin_read16(CAN_MB07_DATA2) +#define bfin_write_CAN_MB07_DATA2(val) bfin_write16(CAN_MB07_DATA2, val) +#define bfin_read_CAN_MB07_DATA3() bfin_read16(CAN_MB07_DATA3) +#define bfin_write_CAN_MB07_DATA3(val) bfin_write16(CAN_MB07_DATA3, val) +#define bfin_read_CAN_MB07_LENGTH() bfin_read16(CAN_MB07_LENGTH) +#define bfin_write_CAN_MB07_LENGTH(val) bfin_write16(CAN_MB07_LENGTH, val) +#define bfin_read_CAN_MB07_TIMESTAMP() bfin_read16(CAN_MB07_TIMESTAMP) +#define bfin_write_CAN_MB07_TIMESTAMP(val) bfin_write16(CAN_MB07_TIMESTAMP, val) +#define bfin_read_CAN_MB07_ID0() bfin_read16(CAN_MB07_ID0) +#define bfin_write_CAN_MB07_ID0(val) bfin_write16(CAN_MB07_ID0, val) +#define bfin_read_CAN_MB07_ID1() bfin_read16(CAN_MB07_ID1) +#define bfin_write_CAN_MB07_ID1(val) bfin_write16(CAN_MB07_ID1, val) +#define bfin_read_CAN_MB08_DATA0() bfin_read16(CAN_MB08_DATA0) +#define bfin_write_CAN_MB08_DATA0(val) bfin_write16(CAN_MB08_DATA0, val) +#define bfin_read_CAN_MB08_DATA1() bfin_read16(CAN_MB08_DATA1) +#define bfin_write_CAN_MB08_DATA1(val) bfin_write16(CAN_MB08_DATA1, val) +#define bfin_read_CAN_MB08_DATA2() bfin_read16(CAN_MB08_DATA2) +#define bfin_write_CAN_MB08_DATA2(val) bfin_write16(CAN_MB08_DATA2, val) +#define bfin_read_CAN_MB08_DATA3() bfin_read16(CAN_MB08_DATA3) +#define bfin_write_CAN_MB08_DATA3(val) bfin_write16(CAN_MB08_DATA3, val) +#define bfin_read_CAN_MB08_LENGTH() bfin_read16(CAN_MB08_LENGTH) +#define bfin_write_CAN_MB08_LENGTH(val) bfin_write16(CAN_MB08_LENGTH, val) +#define bfin_read_CAN_MB08_TIMESTAMP() bfin_read16(CAN_MB08_TIMESTAMP) +#define bfin_write_CAN_MB08_TIMESTAMP(val) bfin_write16(CAN_MB08_TIMESTAMP, val) +#define bfin_read_CAN_MB08_ID0() bfin_read16(CAN_MB08_ID0) +#define bfin_write_CAN_MB08_ID0(val) bfin_write16(CAN_MB08_ID0, val) +#define bfin_read_CAN_MB08_ID1() bfin_read16(CAN_MB08_ID1) +#define bfin_write_CAN_MB08_ID1(val) bfin_write16(CAN_MB08_ID1, val) +#define bfin_read_CAN_MB09_DATA0() bfin_read16(CAN_MB09_DATA0) +#define bfin_write_CAN_MB09_DATA0(val) bfin_write16(CAN_MB09_DATA0, val) +#define bfin_read_CAN_MB09_DATA1() bfin_read16(CAN_MB09_DATA1) +#define bfin_write_CAN_MB09_DATA1(val) bfin_write16(CAN_MB09_DATA1, val) +#define bfin_read_CAN_MB09_DATA2() bfin_read16(CAN_MB09_DATA2) +#define bfin_write_CAN_MB09_DATA2(val) bfin_write16(CAN_MB09_DATA2, val) +#define bfin_read_CAN_MB09_DATA3() bfin_read16(CAN_MB09_DATA3) +#define bfin_write_CAN_MB09_DATA3(val) bfin_write16(CAN_MB09_DATA3, val) +#define bfin_read_CAN_MB09_LENGTH() bfin_read16(CAN_MB09_LENGTH) +#define bfin_write_CAN_MB09_LENGTH(val) bfin_write16(CAN_MB09_LENGTH, val) +#define bfin_read_CAN_MB09_TIMESTAMP() bfin_read16(CAN_MB09_TIMESTAMP) +#define bfin_write_CAN_MB09_TIMESTAMP(val) bfin_write16(CAN_MB09_TIMESTAMP, val) +#define bfin_read_CAN_MB09_ID0() bfin_read16(CAN_MB09_ID0) +#define bfin_write_CAN_MB09_ID0(val) bfin_write16(CAN_MB09_ID0, val) +#define bfin_read_CAN_MB09_ID1() bfin_read16(CAN_MB09_ID1) +#define bfin_write_CAN_MB09_ID1(val) bfin_write16(CAN_MB09_ID1, val) +#define bfin_read_CAN_MB10_DATA0() bfin_read16(CAN_MB10_DATA0) +#define bfin_write_CAN_MB10_DATA0(val) bfin_write16(CAN_MB10_DATA0, val) +#define bfin_read_CAN_MB10_DATA1() bfin_read16(CAN_MB10_DATA1) +#define bfin_write_CAN_MB10_DATA1(val) bfin_write16(CAN_MB10_DATA1, val) +#define bfin_read_CAN_MB10_DATA2() bfin_read16(CAN_MB10_DATA2) +#define bfin_write_CAN_MB10_DATA2(val) bfin_write16(CAN_MB10_DATA2, val) +#define bfin_read_CAN_MB10_DATA3() bfin_read16(CAN_MB10_DATA3) +#define bfin_write_CAN_MB10_DATA3(val) bfin_write16(CAN_MB10_DATA3, val) +#define bfin_read_CAN_MB10_LENGTH() bfin_read16(CAN_MB10_LENGTH) +#define bfin_write_CAN_MB10_LENGTH(val) bfin_write16(CAN_MB10_LENGTH, val) +#define bfin_read_CAN_MB10_TIMESTAMP() bfin_read16(CAN_MB10_TIMESTAMP) +#define bfin_write_CAN_MB10_TIMESTAMP(val) bfin_write16(CAN_MB10_TIMESTAMP, val) +#define bfin_read_CAN_MB10_ID0() bfin_read16(CAN_MB10_ID0) +#define bfin_write_CAN_MB10_ID0(val) bfin_write16(CAN_MB10_ID0, val) +#define bfin_read_CAN_MB10_ID1() bfin_read16(CAN_MB10_ID1) +#define bfin_write_CAN_MB10_ID1(val) bfin_write16(CAN_MB10_ID1, val) +#define bfin_read_CAN_MB11_DATA0() bfin_read16(CAN_MB11_DATA0) +#define bfin_write_CAN_MB11_DATA0(val) bfin_write16(CAN_MB11_DATA0, val) +#define bfin_read_CAN_MB11_DATA1() bfin_read16(CAN_MB11_DATA1) +#define bfin_write_CAN_MB11_DATA1(val) bfin_write16(CAN_MB11_DATA1, val) +#define bfin_read_CAN_MB11_DATA2() bfin_read16(CAN_MB11_DATA2) +#define bfin_write_CAN_MB11_DATA2(val) bfin_write16(CAN_MB11_DATA2, val) +#define bfin_read_CAN_MB11_DATA3() bfin_read16(CAN_MB11_DATA3) +#define bfin_write_CAN_MB11_DATA3(val) bfin_write16(CAN_MB11_DATA3, val) +#define bfin_read_CAN_MB11_LENGTH() bfin_read16(CAN_MB11_LENGTH) +#define bfin_write_CAN_MB11_LENGTH(val) bfin_write16(CAN_MB11_LENGTH, val) +#define bfin_read_CAN_MB11_TIMESTAMP() bfin_read16(CAN_MB11_TIMESTAMP) +#define bfin_write_CAN_MB11_TIMESTAMP(val) bfin_write16(CAN_MB11_TIMESTAMP, val) +#define bfin_read_CAN_MB11_ID0() bfin_read16(CAN_MB11_ID0) +#define bfin_write_CAN_MB11_ID0(val) bfin_write16(CAN_MB11_ID0, val) +#define bfin_read_CAN_MB11_ID1() bfin_read16(CAN_MB11_ID1) +#define bfin_write_CAN_MB11_ID1(val) bfin_write16(CAN_MB11_ID1, val) +#define bfin_read_CAN_MB12_DATA0() bfin_read16(CAN_MB12_DATA0) +#define bfin_write_CAN_MB12_DATA0(val) bfin_write16(CAN_MB12_DATA0, val) +#define bfin_read_CAN_MB12_DATA1() bfin_read16(CAN_MB12_DATA1) +#define bfin_write_CAN_MB12_DATA1(val) bfin_write16(CAN_MB12_DATA1, val) +#define bfin_read_CAN_MB12_DATA2() bfin_read16(CAN_MB12_DATA2) +#define bfin_write_CAN_MB12_DATA2(val) bfin_write16(CAN_MB12_DATA2, val) +#define bfin_read_CAN_MB12_DATA3() bfin_read16(CAN_MB12_DATA3) +#define bfin_write_CAN_MB12_DATA3(val) bfin_write16(CAN_MB12_DATA3, val) +#define bfin_read_CAN_MB12_LENGTH() bfin_read16(CAN_MB12_LENGTH) +#define bfin_write_CAN_MB12_LENGTH(val) bfin_write16(CAN_MB12_LENGTH, val) +#define bfin_read_CAN_MB12_TIMESTAMP() bfin_read16(CAN_MB12_TIMESTAMP) +#define bfin_write_CAN_MB12_TIMESTAMP(val) bfin_write16(CAN_MB12_TIMESTAMP, val) +#define bfin_read_CAN_MB12_ID0() bfin_read16(CAN_MB12_ID0) +#define bfin_write_CAN_MB12_ID0(val) bfin_write16(CAN_MB12_ID0, val) +#define bfin_read_CAN_MB12_ID1() bfin_read16(CAN_MB12_ID1) +#define bfin_write_CAN_MB12_ID1(val) bfin_write16(CAN_MB12_ID1, val) +#define bfin_read_CAN_MB13_DATA0() bfin_read16(CAN_MB13_DATA0) +#define bfin_write_CAN_MB13_DATA0(val) bfin_write16(CAN_MB13_DATA0, val) +#define bfin_read_CAN_MB13_DATA1() bfin_read16(CAN_MB13_DATA1) +#define bfin_write_CAN_MB13_DATA1(val) bfin_write16(CAN_MB13_DATA1, val) +#define bfin_read_CAN_MB13_DATA2() bfin_read16(CAN_MB13_DATA2) +#define bfin_write_CAN_MB13_DATA2(val) bfin_write16(CAN_MB13_DATA2, val) +#define bfin_read_CAN_MB13_DATA3() bfin_read16(CAN_MB13_DATA3) +#define bfin_write_CAN_MB13_DATA3(val) bfin_write16(CAN_MB13_DATA3, val) +#define bfin_read_CAN_MB13_LENGTH() bfin_read16(CAN_MB13_LENGTH) +#define bfin_write_CAN_MB13_LENGTH(val) bfin_write16(CAN_MB13_LENGTH, val) +#define bfin_read_CAN_MB13_TIMESTAMP() bfin_read16(CAN_MB13_TIMESTAMP) +#define bfin_write_CAN_MB13_TIMESTAMP(val) bfin_write16(CAN_MB13_TIMESTAMP, val) +#define bfin_read_CAN_MB13_ID0() bfin_read16(CAN_MB13_ID0) +#define bfin_write_CAN_MB13_ID0(val) bfin_write16(CAN_MB13_ID0, val) +#define bfin_read_CAN_MB13_ID1() bfin_read16(CAN_MB13_ID1) +#define bfin_write_CAN_MB13_ID1(val) bfin_write16(CAN_MB13_ID1, val) +#define bfin_read_CAN_MB14_DATA0() bfin_read16(CAN_MB14_DATA0) +#define bfin_write_CAN_MB14_DATA0(val) bfin_write16(CAN_MB14_DATA0, val) +#define bfin_read_CAN_MB14_DATA1() bfin_read16(CAN_MB14_DATA1) +#define bfin_write_CAN_MB14_DATA1(val) bfin_write16(CAN_MB14_DATA1, val) +#define bfin_read_CAN_MB14_DATA2() bfin_read16(CAN_MB14_DATA2) +#define bfin_write_CAN_MB14_DATA2(val) bfin_write16(CAN_MB14_DATA2, val) +#define bfin_read_CAN_MB14_DATA3() bfin_read16(CAN_MB14_DATA3) +#define bfin_write_CAN_MB14_DATA3(val) bfin_write16(CAN_MB14_DATA3, val) +#define bfin_read_CAN_MB14_LENGTH() bfin_read16(CAN_MB14_LENGTH) +#define bfin_write_CAN_MB14_LENGTH(val) bfin_write16(CAN_MB14_LENGTH, val) +#define bfin_read_CAN_MB14_TIMESTAMP() bfin_read16(CAN_MB14_TIMESTAMP) +#define bfin_write_CAN_MB14_TIMESTAMP(val) bfin_write16(CAN_MB14_TIMESTAMP, val) +#define bfin_read_CAN_MB14_ID0() bfin_read16(CAN_MB14_ID0) +#define bfin_write_CAN_MB14_ID0(val) bfin_write16(CAN_MB14_ID0, val) +#define bfin_read_CAN_MB14_ID1() bfin_read16(CAN_MB14_ID1) +#define bfin_write_CAN_MB14_ID1(val) bfin_write16(CAN_MB14_ID1, val) +#define bfin_read_CAN_MB15_DATA0() bfin_read16(CAN_MB15_DATA0) +#define bfin_write_CAN_MB15_DATA0(val) bfin_write16(CAN_MB15_DATA0, val) +#define bfin_read_CAN_MB15_DATA1() bfin_read16(CAN_MB15_DATA1) +#define bfin_write_CAN_MB15_DATA1(val) bfin_write16(CAN_MB15_DATA1, val) +#define bfin_read_CAN_MB15_DATA2() bfin_read16(CAN_MB15_DATA2) +#define bfin_write_CAN_MB15_DATA2(val) bfin_write16(CAN_MB15_DATA2, val) +#define bfin_read_CAN_MB15_DATA3() bfin_read16(CAN_MB15_DATA3) +#define bfin_write_CAN_MB15_DATA3(val) bfin_write16(CAN_MB15_DATA3, val) +#define bfin_read_CAN_MB15_LENGTH() bfin_read16(CAN_MB15_LENGTH) +#define bfin_write_CAN_MB15_LENGTH(val) bfin_write16(CAN_MB15_LENGTH, val) +#define bfin_read_CAN_MB15_TIMESTAMP() bfin_read16(CAN_MB15_TIMESTAMP) +#define bfin_write_CAN_MB15_TIMESTAMP(val) bfin_write16(CAN_MB15_TIMESTAMP, val) +#define bfin_read_CAN_MB15_ID0() bfin_read16(CAN_MB15_ID0) +#define bfin_write_CAN_MB15_ID0(val) bfin_write16(CAN_MB15_ID0, val) +#define bfin_read_CAN_MB15_ID1() bfin_read16(CAN_MB15_ID1) +#define bfin_write_CAN_MB15_ID1(val) bfin_write16(CAN_MB15_ID1, val) +#define bfin_read_CAN_MB16_DATA0() bfin_read16(CAN_MB16_DATA0) +#define bfin_write_CAN_MB16_DATA0(val) bfin_write16(CAN_MB16_DATA0, val) +#define bfin_read_CAN_MB16_DATA1() bfin_read16(CAN_MB16_DATA1) +#define bfin_write_CAN_MB16_DATA1(val) bfin_write16(CAN_MB16_DATA1, val) +#define bfin_read_CAN_MB16_DATA2() bfin_read16(CAN_MB16_DATA2) +#define bfin_write_CAN_MB16_DATA2(val) bfin_write16(CAN_MB16_DATA2, val) +#define bfin_read_CAN_MB16_DATA3() bfin_read16(CAN_MB16_DATA3) +#define bfin_write_CAN_MB16_DATA3(val) bfin_write16(CAN_MB16_DATA3, val) +#define bfin_read_CAN_MB16_LENGTH() bfin_read16(CAN_MB16_LENGTH) +#define bfin_write_CAN_MB16_LENGTH(val) bfin_write16(CAN_MB16_LENGTH, val) +#define bfin_read_CAN_MB16_TIMESTAMP() bfin_read16(CAN_MB16_TIMESTAMP) +#define bfin_write_CAN_MB16_TIMESTAMP(val) bfin_write16(CAN_MB16_TIMESTAMP, val) +#define bfin_read_CAN_MB16_ID0() bfin_read16(CAN_MB16_ID0) +#define bfin_write_CAN_MB16_ID0(val) bfin_write16(CAN_MB16_ID0, val) +#define bfin_read_CAN_MB16_ID1() bfin_read16(CAN_MB16_ID1) +#define bfin_write_CAN_MB16_ID1(val) bfin_write16(CAN_MB16_ID1, val) +#define bfin_read_CAN_MB17_DATA0() bfin_read16(CAN_MB17_DATA0) +#define bfin_write_CAN_MB17_DATA0(val) bfin_write16(CAN_MB17_DATA0, val) +#define bfin_read_CAN_MB17_DATA1() bfin_read16(CAN_MB17_DATA1) +#define bfin_write_CAN_MB17_DATA1(val) bfin_write16(CAN_MB17_DATA1, val) +#define bfin_read_CAN_MB17_DATA2() bfin_read16(CAN_MB17_DATA2) +#define bfin_write_CAN_MB17_DATA2(val) bfin_write16(CAN_MB17_DATA2, val) +#define bfin_read_CAN_MB17_DATA3() bfin_read16(CAN_MB17_DATA3) +#define bfin_write_CAN_MB17_DATA3(val) bfin_write16(CAN_MB17_DATA3, val) +#define bfin_read_CAN_MB17_LENGTH() bfin_read16(CAN_MB17_LENGTH) +#define bfin_write_CAN_MB17_LENGTH(val) bfin_write16(CAN_MB17_LENGTH, val) +#define bfin_read_CAN_MB17_TIMESTAMP() bfin_read16(CAN_MB17_TIMESTAMP) +#define bfin_write_CAN_MB17_TIMESTAMP(val) bfin_write16(CAN_MB17_TIMESTAMP, val) +#define bfin_read_CAN_MB17_ID0() bfin_read16(CAN_MB17_ID0) +#define bfin_write_CAN_MB17_ID0(val) bfin_write16(CAN_MB17_ID0, val) +#define bfin_read_CAN_MB17_ID1() bfin_read16(CAN_MB17_ID1) +#define bfin_write_CAN_MB17_ID1(val) bfin_write16(CAN_MB17_ID1, val) +#define bfin_read_CAN_MB18_DATA0() bfin_read16(CAN_MB18_DATA0) +#define bfin_write_CAN_MB18_DATA0(val) bfin_write16(CAN_MB18_DATA0, val) +#define bfin_read_CAN_MB18_DATA1() bfin_read16(CAN_MB18_DATA1) +#define bfin_write_CAN_MB18_DATA1(val) bfin_write16(CAN_MB18_DATA1, val) +#define bfin_read_CAN_MB18_DATA2() bfin_read16(CAN_MB18_DATA2) +#define bfin_write_CAN_MB18_DATA2(val) bfin_write16(CAN_MB18_DATA2, val) +#define bfin_read_CAN_MB18_DATA3() bfin_read16(CAN_MB18_DATA3) +#define bfin_write_CAN_MB18_DATA3(val) bfin_write16(CAN_MB18_DATA3, val) +#define bfin_read_CAN_MB18_LENGTH() bfin_read16(CAN_MB18_LENGTH) +#define bfin_write_CAN_MB18_LENGTH(val) bfin_write16(CAN_MB18_LENGTH, val) +#define bfin_read_CAN_MB18_TIMESTAMP() bfin_read16(CAN_MB18_TIMESTAMP) +#define bfin_write_CAN_MB18_TIMESTAMP(val) bfin_write16(CAN_MB18_TIMESTAMP, val) +#define bfin_read_CAN_MB18_ID0() bfin_read16(CAN_MB18_ID0) +#define bfin_write_CAN_MB18_ID0(val) bfin_write16(CAN_MB18_ID0, val) +#define bfin_read_CAN_MB18_ID1() bfin_read16(CAN_MB18_ID1) +#define bfin_write_CAN_MB18_ID1(val) bfin_write16(CAN_MB18_ID1, val) +#define bfin_read_CAN_MB19_DATA0() bfin_read16(CAN_MB19_DATA0) +#define bfin_write_CAN_MB19_DATA0(val) bfin_write16(CAN_MB19_DATA0, val) +#define bfin_read_CAN_MB19_DATA1() bfin_read16(CAN_MB19_DATA1) +#define bfin_write_CAN_MB19_DATA1(val) bfin_write16(CAN_MB19_DATA1, val) +#define bfin_read_CAN_MB19_DATA2() bfin_read16(CAN_MB19_DATA2) +#define bfin_write_CAN_MB19_DATA2(val) bfin_write16(CAN_MB19_DATA2, val) +#define bfin_read_CAN_MB19_DATA3() bfin_read16(CAN_MB19_DATA3) +#define bfin_write_CAN_MB19_DATA3(val) bfin_write16(CAN_MB19_DATA3, val) +#define bfin_read_CAN_MB19_LENGTH() bfin_read16(CAN_MB19_LENGTH) +#define bfin_write_CAN_MB19_LENGTH(val) bfin_write16(CAN_MB19_LENGTH, val) +#define bfin_read_CAN_MB19_TIMESTAMP() bfin_read16(CAN_MB19_TIMESTAMP) +#define bfin_write_CAN_MB19_TIMESTAMP(val) bfin_write16(CAN_MB19_TIMESTAMP, val) +#define bfin_read_CAN_MB19_ID0() bfin_read16(CAN_MB19_ID0) +#define bfin_write_CAN_MB19_ID0(val) bfin_write16(CAN_MB19_ID0, val) +#define bfin_read_CAN_MB19_ID1() bfin_read16(CAN_MB19_ID1) +#define bfin_write_CAN_MB19_ID1(val) bfin_write16(CAN_MB19_ID1, val) +#define bfin_read_CAN_MB20_DATA0() bfin_read16(CAN_MB20_DATA0) +#define bfin_write_CAN_MB20_DATA0(val) bfin_write16(CAN_MB20_DATA0, val) +#define bfin_read_CAN_MB20_DATA1() bfin_read16(CAN_MB20_DATA1) +#define bfin_write_CAN_MB20_DATA1(val) bfin_write16(CAN_MB20_DATA1, val) +#define bfin_read_CAN_MB20_DATA2() bfin_read16(CAN_MB20_DATA2) +#define bfin_write_CAN_MB20_DATA2(val) bfin_write16(CAN_MB20_DATA2, val) +#define bfin_read_CAN_MB20_DATA3() bfin_read16(CAN_MB20_DATA3) +#define bfin_write_CAN_MB20_DATA3(val) bfin_write16(CAN_MB20_DATA3, val) +#define bfin_read_CAN_MB20_LENGTH() bfin_read16(CAN_MB20_LENGTH) +#define bfin_write_CAN_MB20_LENGTH(val) bfin_write16(CAN_MB20_LENGTH, val) +#define bfin_read_CAN_MB20_TIMESTAMP() bfin_read16(CAN_MB20_TIMESTAMP) +#define bfin_write_CAN_MB20_TIMESTAMP(val) bfin_write16(CAN_MB20_TIMESTAMP, val) +#define bfin_read_CAN_MB20_ID0() bfin_read16(CAN_MB20_ID0) +#define bfin_write_CAN_MB20_ID0(val) bfin_write16(CAN_MB20_ID0, val) +#define bfin_read_CAN_MB20_ID1() bfin_read16(CAN_MB20_ID1) +#define bfin_write_CAN_MB20_ID1(val) bfin_write16(CAN_MB20_ID1, val) +#define bfin_read_CAN_MB21_DATA0() bfin_read16(CAN_MB21_DATA0) +#define bfin_write_CAN_MB21_DATA0(val) bfin_write16(CAN_MB21_DATA0, val) +#define bfin_read_CAN_MB21_DATA1() bfin_read16(CAN_MB21_DATA1) +#define bfin_write_CAN_MB21_DATA1(val) bfin_write16(CAN_MB21_DATA1, val) +#define bfin_read_CAN_MB21_DATA2() bfin_read16(CAN_MB21_DATA2) +#define bfin_write_CAN_MB21_DATA2(val) bfin_write16(CAN_MB21_DATA2, val) +#define bfin_read_CAN_MB21_DATA3() bfin_read16(CAN_MB21_DATA3) +#define bfin_write_CAN_MB21_DATA3(val) bfin_write16(CAN_MB21_DATA3, val) +#define bfin_read_CAN_MB21_LENGTH() bfin_read16(CAN_MB21_LENGTH) +#define bfin_write_CAN_MB21_LENGTH(val) bfin_write16(CAN_MB21_LENGTH, val) +#define bfin_read_CAN_MB21_TIMESTAMP() bfin_read16(CAN_MB21_TIMESTAMP) +#define bfin_write_CAN_MB21_TIMESTAMP(val) bfin_write16(CAN_MB21_TIMESTAMP, val) +#define bfin_read_CAN_MB21_ID0() bfin_read16(CAN_MB21_ID0) +#define bfin_write_CAN_MB21_ID0(val) bfin_write16(CAN_MB21_ID0, val) +#define bfin_read_CAN_MB21_ID1() bfin_read16(CAN_MB21_ID1) +#define bfin_write_CAN_MB21_ID1(val) bfin_write16(CAN_MB21_ID1, val) +#define bfin_read_CAN_MB22_DATA0() bfin_read16(CAN_MB22_DATA0) +#define bfin_write_CAN_MB22_DATA0(val) bfin_write16(CAN_MB22_DATA0, val) +#define bfin_read_CAN_MB22_DATA1() bfin_read16(CAN_MB22_DATA1) +#define bfin_write_CAN_MB22_DATA1(val) bfin_write16(CAN_MB22_DATA1, val) +#define bfin_read_CAN_MB22_DATA2() bfin_read16(CAN_MB22_DATA2) +#define bfin_write_CAN_MB22_DATA2(val) bfin_write16(CAN_MB22_DATA2, val) +#define bfin_read_CAN_MB22_DATA3() bfin_read16(CAN_MB22_DATA3) +#define bfin_write_CAN_MB22_DATA3(val) bfin_write16(CAN_MB22_DATA3, val) +#define bfin_read_CAN_MB22_LENGTH() bfin_read16(CAN_MB22_LENGTH) +#define bfin_write_CAN_MB22_LENGTH(val) bfin_write16(CAN_MB22_LENGTH, val) +#define bfin_read_CAN_MB22_TIMESTAMP() bfin_read16(CAN_MB22_TIMESTAMP) +#define bfin_write_CAN_MB22_TIMESTAMP(val) bfin_write16(CAN_MB22_TIMESTAMP, val) +#define bfin_read_CAN_MB22_ID0() bfin_read16(CAN_MB22_ID0) +#define bfin_write_CAN_MB22_ID0(val) bfin_write16(CAN_MB22_ID0, val) +#define bfin_read_CAN_MB22_ID1() bfin_read16(CAN_MB22_ID1) +#define bfin_write_CAN_MB22_ID1(val) bfin_write16(CAN_MB22_ID1, val) +#define bfin_read_CAN_MB23_DATA0() bfin_read16(CAN_MB23_DATA0) +#define bfin_write_CAN_MB23_DATA0(val) bfin_write16(CAN_MB23_DATA0, val) +#define bfin_read_CAN_MB23_DATA1() bfin_read16(CAN_MB23_DATA1) +#define bfin_write_CAN_MB23_DATA1(val) bfin_write16(CAN_MB23_DATA1, val) +#define bfin_read_CAN_MB23_DATA2() bfin_read16(CAN_MB23_DATA2) +#define bfin_write_CAN_MB23_DATA2(val) bfin_write16(CAN_MB23_DATA2, val) +#define bfin_read_CAN_MB23_DATA3() bfin_read16(CAN_MB23_DATA3) +#define bfin_write_CAN_MB23_DATA3(val) bfin_write16(CAN_MB23_DATA3, val) +#define bfin_read_CAN_MB23_LENGTH() bfin_read16(CAN_MB23_LENGTH) +#define bfin_write_CAN_MB23_LENGTH(val) bfin_write16(CAN_MB23_LENGTH, val) +#define bfin_read_CAN_MB23_TIMESTAMP() bfin_read16(CAN_MB23_TIMESTAMP) +#define bfin_write_CAN_MB23_TIMESTAMP(val) bfin_write16(CAN_MB23_TIMESTAMP, val) +#define bfin_read_CAN_MB23_ID0() bfin_read16(CAN_MB23_ID0) +#define bfin_write_CAN_MB23_ID0(val) bfin_write16(CAN_MB23_ID0, val) +#define bfin_read_CAN_MB23_ID1() bfin_read16(CAN_MB23_ID1) +#define bfin_write_CAN_MB23_ID1(val) bfin_write16(CAN_MB23_ID1, val) +#define bfin_read_CAN_MB24_DATA0() bfin_read16(CAN_MB24_DATA0) +#define bfin_write_CAN_MB24_DATA0(val) bfin_write16(CAN_MB24_DATA0, val) +#define bfin_read_CAN_MB24_DATA1() bfin_read16(CAN_MB24_DATA1) +#define bfin_write_CAN_MB24_DATA1(val) bfin_write16(CAN_MB24_DATA1, val) +#define bfin_read_CAN_MB24_DATA2() bfin_read16(CAN_MB24_DATA2) +#define bfin_write_CAN_MB24_DATA2(val) bfin_write16(CAN_MB24_DATA2, val) +#define bfin_read_CAN_MB24_DATA3() bfin_read16(CAN_MB24_DATA3) +#define bfin_write_CAN_MB24_DATA3(val) bfin_write16(CAN_MB24_DATA3, val) +#define bfin_read_CAN_MB24_LENGTH() bfin_read16(CAN_MB24_LENGTH) +#define bfin_write_CAN_MB24_LENGTH(val) bfin_write16(CAN_MB24_LENGTH, val) +#define bfin_read_CAN_MB24_TIMESTAMP() bfin_read16(CAN_MB24_TIMESTAMP) +#define bfin_write_CAN_MB24_TIMESTAMP(val) bfin_write16(CAN_MB24_TIMESTAMP, val) +#define bfin_read_CAN_MB24_ID0() bfin_read16(CAN_MB24_ID0) +#define bfin_write_CAN_MB24_ID0(val) bfin_write16(CAN_MB24_ID0, val) +#define bfin_read_CAN_MB24_ID1() bfin_read16(CAN_MB24_ID1) +#define bfin_write_CAN_MB24_ID1(val) bfin_write16(CAN_MB24_ID1, val) +#define bfin_read_CAN_MB25_DATA0() bfin_read16(CAN_MB25_DATA0) +#define bfin_write_CAN_MB25_DATA0(val) bfin_write16(CAN_MB25_DATA0, val) +#define bfin_read_CAN_MB25_DATA1() bfin_read16(CAN_MB25_DATA1) +#define bfin_write_CAN_MB25_DATA1(val) bfin_write16(CAN_MB25_DATA1, val) +#define bfin_read_CAN_MB25_DATA2() bfin_read16(CAN_MB25_DATA2) +#define bfin_write_CAN_MB25_DATA2(val) bfin_write16(CAN_MB25_DATA2, val) +#define bfin_read_CAN_MB25_DATA3() bfin_read16(CAN_MB25_DATA3) +#define bfin_write_CAN_MB25_DATA3(val) bfin_write16(CAN_MB25_DATA3, val) +#define bfin_read_CAN_MB25_LENGTH() bfin_read16(CAN_MB25_LENGTH) +#define bfin_write_CAN_MB25_LENGTH(val) bfin_write16(CAN_MB25_LENGTH, val) +#define bfin_read_CAN_MB25_TIMESTAMP() bfin_read16(CAN_MB25_TIMESTAMP) +#define bfin_write_CAN_MB25_TIMESTAMP(val) bfin_write16(CAN_MB25_TIMESTAMP, val) +#define bfin_read_CAN_MB25_ID0() bfin_read16(CAN_MB25_ID0) +#define bfin_write_CAN_MB25_ID0(val) bfin_write16(CAN_MB25_ID0, val) +#define bfin_read_CAN_MB25_ID1() bfin_read16(CAN_MB25_ID1) +#define bfin_write_CAN_MB25_ID1(val) bfin_write16(CAN_MB25_ID1, val) +#define bfin_read_CAN_MB26_DATA0() bfin_read16(CAN_MB26_DATA0) +#define bfin_write_CAN_MB26_DATA0(val) bfin_write16(CAN_MB26_DATA0, val) +#define bfin_read_CAN_MB26_DATA1() bfin_read16(CAN_MB26_DATA1) +#define bfin_write_CAN_MB26_DATA1(val) bfin_write16(CAN_MB26_DATA1, val) +#define bfin_read_CAN_MB26_DATA2() bfin_read16(CAN_MB26_DATA2) +#define bfin_write_CAN_MB26_DATA2(val) bfin_write16(CAN_MB26_DATA2, val) +#define bfin_read_CAN_MB26_DATA3() bfin_read16(CAN_MB26_DATA3) +#define bfin_write_CAN_MB26_DATA3(val) bfin_write16(CAN_MB26_DATA3, val) +#define bfin_read_CAN_MB26_LENGTH() bfin_read16(CAN_MB26_LENGTH) +#define bfin_write_CAN_MB26_LENGTH(val) bfin_write16(CAN_MB26_LENGTH, val) +#define bfin_read_CAN_MB26_TIMESTAMP() bfin_read16(CAN_MB26_TIMESTAMP) +#define bfin_write_CAN_MB26_TIMESTAMP(val) bfin_write16(CAN_MB26_TIMESTAMP, val) +#define bfin_read_CAN_MB26_ID0() bfin_read16(CAN_MB26_ID0) +#define bfin_write_CAN_MB26_ID0(val) bfin_write16(CAN_MB26_ID0, val) +#define bfin_read_CAN_MB26_ID1() bfin_read16(CAN_MB26_ID1) +#define bfin_write_CAN_MB26_ID1(val) bfin_write16(CAN_MB26_ID1, val) +#define bfin_read_CAN_MB27_DATA0() bfin_read16(CAN_MB27_DATA0) +#define bfin_write_CAN_MB27_DATA0(val) bfin_write16(CAN_MB27_DATA0, val) +#define bfin_read_CAN_MB27_DATA1() bfin_read16(CAN_MB27_DATA1) +#define bfin_write_CAN_MB27_DATA1(val) bfin_write16(CAN_MB27_DATA1, val) +#define bfin_read_CAN_MB27_DATA2() bfin_read16(CAN_MB27_DATA2) +#define bfin_write_CAN_MB27_DATA2(val) bfin_write16(CAN_MB27_DATA2, val) +#define bfin_read_CAN_MB27_DATA3() bfin_read16(CAN_MB27_DATA3) +#define bfin_write_CAN_MB27_DATA3(val) bfin_write16(CAN_MB27_DATA3, val) +#define bfin_read_CAN_MB27_LENGTH() bfin_read16(CAN_MB27_LENGTH) +#define bfin_write_CAN_MB27_LENGTH(val) bfin_write16(CAN_MB27_LENGTH, val) +#define bfin_read_CAN_MB27_TIMESTAMP() bfin_read16(CAN_MB27_TIMESTAMP) +#define bfin_write_CAN_MB27_TIMESTAMP(val) bfin_write16(CAN_MB27_TIMESTAMP, val) +#define bfin_read_CAN_MB27_ID0() bfin_read16(CAN_MB27_ID0) +#define bfin_write_CAN_MB27_ID0(val) bfin_write16(CAN_MB27_ID0, val) +#define bfin_read_CAN_MB27_ID1() bfin_read16(CAN_MB27_ID1) +#define bfin_write_CAN_MB27_ID1(val) bfin_write16(CAN_MB27_ID1, val) +#define bfin_read_CAN_MB28_DATA0() bfin_read16(CAN_MB28_DATA0) +#define bfin_write_CAN_MB28_DATA0(val) bfin_write16(CAN_MB28_DATA0, val) +#define bfin_read_CAN_MB28_DATA1() bfin_read16(CAN_MB28_DATA1) +#define bfin_write_CAN_MB28_DATA1(val) bfin_write16(CAN_MB28_DATA1, val) +#define bfin_read_CAN_MB28_DATA2() bfin_read16(CAN_MB28_DATA2) +#define bfin_write_CAN_MB28_DATA2(val) bfin_write16(CAN_MB28_DATA2, val) +#define bfin_read_CAN_MB28_DATA3() bfin_read16(CAN_MB28_DATA3) +#define bfin_write_CAN_MB28_DATA3(val) bfin_write16(CAN_MB28_DATA3, val) +#define bfin_read_CAN_MB28_LENGTH() bfin_read16(CAN_MB28_LENGTH) +#define bfin_write_CAN_MB28_LENGTH(val) bfin_write16(CAN_MB28_LENGTH, val) +#define bfin_read_CAN_MB28_TIMESTAMP() bfin_read16(CAN_MB28_TIMESTAMP) +#define bfin_write_CAN_MB28_TIMESTAMP(val) bfin_write16(CAN_MB28_TIMESTAMP, val) +#define bfin_read_CAN_MB28_ID0() bfin_read16(CAN_MB28_ID0) +#define bfin_write_CAN_MB28_ID0(val) bfin_write16(CAN_MB28_ID0, val) +#define bfin_read_CAN_MB28_ID1() bfin_read16(CAN_MB28_ID1) +#define bfin_write_CAN_MB28_ID1(val) bfin_write16(CAN_MB28_ID1, val) +#define bfin_read_CAN_MB29_DATA0() bfin_read16(CAN_MB29_DATA0) +#define bfin_write_CAN_MB29_DATA0(val) bfin_write16(CAN_MB29_DATA0, val) +#define bfin_read_CAN_MB29_DATA1() bfin_read16(CAN_MB29_DATA1) +#define bfin_write_CAN_MB29_DATA1(val) bfin_write16(CAN_MB29_DATA1, val) +#define bfin_read_CAN_MB29_DATA2() bfin_read16(CAN_MB29_DATA2) +#define bfin_write_CAN_MB29_DATA2(val) bfin_write16(CAN_MB29_DATA2, val) +#define bfin_read_CAN_MB29_DATA3() bfin_read16(CAN_MB29_DATA3) +#define bfin_write_CAN_MB29_DATA3(val) bfin_write16(CAN_MB29_DATA3, val) +#define bfin_read_CAN_MB29_LENGTH() bfin_read16(CAN_MB29_LENGTH) +#define bfin_write_CAN_MB29_LENGTH(val) bfin_write16(CAN_MB29_LENGTH, val) +#define bfin_read_CAN_MB29_TIMESTAMP() bfin_read16(CAN_MB29_TIMESTAMP) +#define bfin_write_CAN_MB29_TIMESTAMP(val) bfin_write16(CAN_MB29_TIMESTAMP, val) +#define bfin_read_CAN_MB29_ID0() bfin_read16(CAN_MB29_ID0) +#define bfin_write_CAN_MB29_ID0(val) bfin_write16(CAN_MB29_ID0, val) +#define bfin_read_CAN_MB29_ID1() bfin_read16(CAN_MB29_ID1) +#define bfin_write_CAN_MB29_ID1(val) bfin_write16(CAN_MB29_ID1, val) +#define bfin_read_CAN_MB30_DATA0() bfin_read16(CAN_MB30_DATA0) +#define bfin_write_CAN_MB30_DATA0(val) bfin_write16(CAN_MB30_DATA0, val) +#define bfin_read_CAN_MB30_DATA1() bfin_read16(CAN_MB30_DATA1) +#define bfin_write_CAN_MB30_DATA1(val) bfin_write16(CAN_MB30_DATA1, val) +#define bfin_read_CAN_MB30_DATA2() bfin_read16(CAN_MB30_DATA2) +#define bfin_write_CAN_MB30_DATA2(val) bfin_write16(CAN_MB30_DATA2, val) +#define bfin_read_CAN_MB30_DATA3() bfin_read16(CAN_MB30_DATA3) +#define bfin_write_CAN_MB30_DATA3(val) bfin_write16(CAN_MB30_DATA3, val) +#define bfin_read_CAN_MB30_LENGTH() bfin_read16(CAN_MB30_LENGTH) +#define bfin_write_CAN_MB30_LENGTH(val) bfin_write16(CAN_MB30_LENGTH, val) +#define bfin_read_CAN_MB30_TIMESTAMP() bfin_read16(CAN_MB30_TIMESTAMP) +#define bfin_write_CAN_MB30_TIMESTAMP(val) bfin_write16(CAN_MB30_TIMESTAMP, val) +#define bfin_read_CAN_MB30_ID0() bfin_read16(CAN_MB30_ID0) +#define bfin_write_CAN_MB30_ID0(val) bfin_write16(CAN_MB30_ID0, val) +#define bfin_read_CAN_MB30_ID1() bfin_read16(CAN_MB30_ID1) +#define bfin_write_CAN_MB30_ID1(val) bfin_write16(CAN_MB30_ID1, val) +#define bfin_read_CAN_MB31_DATA0() bfin_read16(CAN_MB31_DATA0) +#define bfin_write_CAN_MB31_DATA0(val) bfin_write16(CAN_MB31_DATA0, val) +#define bfin_read_CAN_MB31_DATA1() bfin_read16(CAN_MB31_DATA1) +#define bfin_write_CAN_MB31_DATA1(val) bfin_write16(CAN_MB31_DATA1, val) +#define bfin_read_CAN_MB31_DATA2() bfin_read16(CAN_MB31_DATA2) +#define bfin_write_CAN_MB31_DATA2(val) bfin_write16(CAN_MB31_DATA2, val) +#define bfin_read_CAN_MB31_DATA3() bfin_read16(CAN_MB31_DATA3) +#define bfin_write_CAN_MB31_DATA3(val) bfin_write16(CAN_MB31_DATA3, val) +#define bfin_read_CAN_MB31_LENGTH() bfin_read16(CAN_MB31_LENGTH) +#define bfin_write_CAN_MB31_LENGTH(val) bfin_write16(CAN_MB31_LENGTH, val) +#define bfin_read_CAN_MB31_TIMESTAMP() bfin_read16(CAN_MB31_TIMESTAMP) +#define bfin_write_CAN_MB31_TIMESTAMP(val) bfin_write16(CAN_MB31_TIMESTAMP, val) +#define bfin_read_CAN_MB31_ID0() bfin_read16(CAN_MB31_ID0) +#define bfin_write_CAN_MB31_ID0(val) bfin_write16(CAN_MB31_ID0, val) +#define bfin_read_CAN_MB31_ID1() bfin_read16(CAN_MB31_ID1) +#define bfin_write_CAN_MB31_ID1(val) bfin_write16(CAN_MB31_ID1, val) +#define bfin_read_PORTF_FER() bfin_read16(PORTF_FER) +#define bfin_write_PORTF_FER(val) bfin_write16(PORTF_FER, val) +#define bfin_read_PORTG_FER() bfin_read16(PORTG_FER) +#define bfin_write_PORTG_FER(val) bfin_write16(PORTG_FER, val) +#define bfin_read_PORTH_FER() bfin_read16(PORTH_FER) +#define bfin_write_PORTH_FER(val) bfin_write16(PORTH_FER, val) +#define bfin_read_PORT_MUX() bfin_read16(PORT_MUX) +#define bfin_write_PORT_MUX(val) bfin_write16(PORT_MUX, val) +#define bfin_read_HMDMA0_CONTROL() bfin_read16(HMDMA0_CONTROL) +#define bfin_write_HMDMA0_CONTROL(val) bfin_write16(HMDMA0_CONTROL, val) +#define bfin_read_HMDMA0_ECINIT() bfin_read16(HMDMA0_ECINIT) +#define bfin_write_HMDMA0_ECINIT(val) bfin_write16(HMDMA0_ECINIT, val) +#define bfin_read_HMDMA0_BCINIT() bfin_read16(HMDMA0_BCINIT) +#define bfin_write_HMDMA0_BCINIT(val) bfin_write16(HMDMA0_BCINIT, val) +#define bfin_read_HMDMA0_ECURGENT() bfin_read16(HMDMA0_ECURGENT) +#define bfin_write_HMDMA0_ECURGENT(val) bfin_write16(HMDMA0_ECURGENT, val) +#define bfin_read_HMDMA0_ECOVERFLOW() bfin_read16(HMDMA0_ECOVERFLOW) +#define bfin_write_HMDMA0_ECOVERFLOW(val) bfin_write16(HMDMA0_ECOVERFLOW, val) +#define bfin_read_HMDMA0_ECOUNT() bfin_read16(HMDMA0_ECOUNT) +#define bfin_write_HMDMA0_ECOUNT(val) bfin_write16(HMDMA0_ECOUNT, val) +#define bfin_read_HMDMA0_BCOUNT() bfin_read16(HMDMA0_BCOUNT) +#define bfin_write_HMDMA0_BCOUNT(val) bfin_write16(HMDMA0_BCOUNT, val) +#define bfin_read_HMDMA1_CONTROL() bfin_read16(HMDMA1_CONTROL) +#define bfin_write_HMDMA1_CONTROL(val) bfin_write16(HMDMA1_CONTROL, val) +#define bfin_read_HMDMA1_ECINIT() bfin_read16(HMDMA1_ECINIT) +#define bfin_write_HMDMA1_ECINIT(val) bfin_write16(HMDMA1_ECINIT, val) +#define bfin_read_HMDMA1_BCINIT() bfin_read16(HMDMA1_BCINIT) +#define bfin_write_HMDMA1_BCINIT(val) bfin_write16(HMDMA1_BCINIT, val) +#define bfin_read_HMDMA1_ECURGENT() bfin_read16(HMDMA1_ECURGENT) +#define bfin_write_HMDMA1_ECURGENT(val) bfin_write16(HMDMA1_ECURGENT, val) +#define bfin_read_HMDMA1_ECOVERFLOW() bfin_read16(HMDMA1_ECOVERFLOW) +#define bfin_write_HMDMA1_ECOVERFLOW(val) bfin_write16(HMDMA1_ECOVERFLOW, val) +#define bfin_read_HMDMA1_ECOUNT() bfin_read16(HMDMA1_ECOUNT) +#define bfin_write_HMDMA1_ECOUNT(val) bfin_write16(HMDMA1_ECOUNT, val) +#define bfin_read_HMDMA1_BCOUNT() bfin_read16(HMDMA1_BCOUNT) +#define bfin_write_HMDMA1_BCOUNT(val) bfin_write16(HMDMA1_BCOUNT, val) +#define bfin_read_CHIPID() bfin_read32(CHIPID) +#define bfin_write_CHIPID(val) bfin_write32(CHIPID, val) +#define bfin_read_DMA_TC_CNT() bfin_read16(DMA_TC_CNT) +#define bfin_write_DMA_TC_CNT(val) bfin_write16(DMA_TC_CNT, val) +#define bfin_read_DMA_TC_PER() bfin_read16(DMA_TC_PER) +#define bfin_write_DMA_TC_PER(val) bfin_write16(DMA_TC_PER, val) #endif /* __BFIN_CDEF_ADSP_BF534_proc__ */ diff --git a/arch/blackfin/include/asm/mach-bf537/BF534_def.h b/arch/blackfin/include/asm/mach-bf537/BF534_def.h index e04676c..cb6a543 100644 --- a/arch/blackfin/include/asm/mach-bf537/BF534_def.h +++ b/arch/blackfin/include/asm/mach-bf537/BF534_def.h @@ -8,9 +8,815 @@ #include "../mach-common/ADSP-EDN-core_def.h" -#include "ADSP-EDN-BF534-extended_def.h" +#define PLL_CTL 0xFFC00000 /* PLL Control Register */ +#define PLL_DIV 0xFFC00004 /* PLL Divide Register */ +#define VR_CTL 0xFFC00008 /* Voltage Regulator Control Register */ +#define PLL_STAT 0xFFC0000C /* PLL Status Register */ +#define PLL_LOCKCNT 0xFFC00010 /* PLL Lock Count Register */ +#define SWRST 0xFFC00100 /* Software Reset Register */ +#define SYSCR 0xFFC00104 /* System Configuration Register */ +#define SIC_RVECT 0xFFC00108 /* Interrupt Reset Vector Address Register */ +#define SIC_IMASK 0xFFC0010C /* Interrupt Mask Register */ +#define SIC_IAR0 0xFFC00110 /* Interrupt Assignment Register 0 */ +#define SIC_IAR1 0xFFC00114 /* Interrupt Assignment Register 1 */ +#define SIC_IAR2 0xFFC00118 /* Interrupt Assignment Register 2 */ +#define SIC_IAR3 0xFFC0011C /* Interrupt Assignment Register 3 */ +#define SIC_ISR 0xFFC00120 /* Interrupt Status Register */ +#define SIC_IWR 0xFFC00124 /* Interrupt Wakeup Register */ +#define WDOG_CTL 0xFFC00200 /* Watchdog Control Register */ +#define WDOG_CNT 0xFFC00204 /* Watchdog Count Register */ +#define WDOG_STAT 0xFFC00208 /* Watchdog Status Register */ +#define RTC_STAT 0xFFC00300 /* RTC Status Register */ +#define RTC_ICTL 0xFFC00304 /* RTC Interrupt Control Register */ +#define RTC_ISTAT 0xFFC00308 /* RTC Interrupt Status Register */ +#define RTC_SWCNT 0xFFC0030C /* RTC Stopwatch Count Register */ +#define RTC_ALARM 0xFFC00310 /* RTC Alarm Time Register */ +#define RTC_PREN 0xFFC00314 /* RTC Prescaler Enable Register */ +#define UART0_THR 0xFFC00400 /* Transmit Holding register */ +#define UART0_RBR 0xFFC00400 /* Receive Buffer register */ +#define UART0_DLL 0xFFC00400 /* Divisor Latch (Low-Byte) */ +#define UART0_IER 0xFFC00404 /* Interrupt Enable Register */ +#define UART0_DLH 0xFFC00404 /* Divisor Latch (High-Byte) */ +#define UART0_IIR 0xFFC00408 /* Interrupt Identification Register */ +#define UART0_LCR 0xFFC0040C /* Line Control Register */ +#define UART0_MCR 0xFFC00410 /* Modem Control Register */ +#define UART0_LSR 0xFFC00414 /* Line Status Register */ +#define UART0_MSR 0xFFC00418 /* Modem Status Register */ +#define UART0_SCR 0xFFC0041C /* SCR Scratch Register */ +#define UART0_GCTL 0xFFC00424 /* Global Control Register */ +#define SPI_CTL 0xFFC00500 /* SPI Control Register */ +#define SPI_FLG 0xFFC00504 /* SPI Flag register */ +#define SPI_STAT 0xFFC00508 /* SPI Status register */ +#define SPI_TDBR 0xFFC0050C /* SPI Transmit Data Buffer Register */ +#define SPI_RDBR 0xFFC00510 /* SPI Receive Data Buffer Register */ +#define SPI_BAUD 0xFFC00514 /* SPI Baud rate Register */ +#define SPI_SHADOW 0xFFC00518 /* SPI_RDBR Shadow Register */ +#define TIMER0_CONFIG 0xFFC00600 /* Timer 0 Configuration Register */ +#define TIMER0_COUNTER 0xFFC00604 /* Timer 0 Counter Register */ +#define TIMER0_PERIOD 0xFFC00608 /* Timer 0 Period Register */ +#define TIMER0_WIDTH 0xFFC0060C /* Timer 0 Width Register */ +#define TIMER1_CONFIG 0xFFC00610 /* Timer 1 Configuration Register */ +#define TIMER1_COUNTER 0xFFC00614 /* Timer 1 Counter Register */ +#define TIMER1_PERIOD 0xFFC00618 /* Timer 1 Period Register */ +#define TIMER1_WIDTH 0xFFC0061C /* Timer 1 Width Register */ +#define TIMER2_CONFIG 0xFFC00620 /* Timer 2 Configuration Register */ +#define TIMER2_COUNTER 0xFFC00624 /* Timer 2 Counter Register */ +#define TIMER2_PERIOD 0xFFC00628 /* Timer 2 Period Register */ +#define TIMER2_WIDTH 0xFFC0062C /* Timer 2 Width Register */ +#define TIMER3_CONFIG 0xFFC00630 /* Timer 3 Configuration Register */ +#define TIMER3_COUNTER 0xFFC00634 /* Timer 3 Counter Register */ +#define TIMER3_PERIOD 0xFFC00638 /* Timer 3 Period Register */ +#define TIMER3_WIDTH 0xFFC0063C /* Timer 3 Width Register */ +#define TIMER4_CONFIG 0xFFC00640 /* Timer 4 Configuration Register */ +#define TIMER4_COUNTER 0xFFC00644 /* Timer 4 Counter Register */ +#define TIMER4_PERIOD 0xFFC00648 /* Timer 4 Period Register */ +#define TIMER4_WIDTH 0xFFC0064C /* Timer 4 Width Register */ +#define TIMER5_CONFIG 0xFFC00650 /* Timer 5 Configuration Register */ +#define TIMER5_COUNTER 0xFFC00654 /* Timer 5 Counter Register */ +#define TIMER5_PERIOD 0xFFC00658 /* Timer 5 Period Register */ +#define TIMER5_WIDTH 0xFFC0065C /* Timer 5 Width Register */ +#define TIMER6_CONFIG 0xFFC00660 /* Timer 6 Configuration Register */ +#define TIMER6_COUNTER 0xFFC00664 /* Timer 6 Counter Register */ +#define TIMER6_PERIOD 0xFFC00668 /* Timer 6 Period Register */ +#define TIMER6_WIDTH 0xFFC0066C /* Timer 6 Width Register\n */ +#define TIMER7_CONFIG 0xFFC00670 /* Timer 7 Configuration Register */ +#define TIMER7_COUNTER 0xFFC00674 /* Timer 7 Counter Register */ +#define TIMER7_PERIOD 0xFFC00678 /* Timer 7 Period Register */ +#define TIMER7_WIDTH 0xFFC0067C /* Timer 7 Width Register */ +#define TIMER_ENABLE 0xFFC00680 /* Timer Enable Register */ +#define TIMER_DISABLE 0xFFC00684 /* Timer Disable Register */ +#define TIMER_STATUS 0xFFC00688 /* Timer Status Register */ +#define PORTFIO 0xFFC00700 /* Port F I/O Pin State Specify Register */ +#define PORTFIO_CLEAR 0xFFC00704 /* Port F I/O Peripheral Interrupt Clear Register */ +#define PORTFIO_SET 0xFFC00708 /* Port F I/O Peripheral Interrupt Set Register */ +#define PORTFIO_TOGGLE 0xFFC0070C /* Port F I/O Pin State Toggle Register */ +#define PORTFIO_MASKA 0xFFC00710 /* Port F I/O Mask State Specify Interrupt A Register */ +#define PORTFIO_MASKA_CLEAR 0xFFC00714 /* Port F I/O Mask Disable Interrupt A Register */ +#define PORTFIO_MASKA_SET 0xFFC00718 /* Port F I/O Mask Enable Interrupt A Register */ +#define PORTFIO_MASKA_TOGGLE 0xFFC0071C /* Port F I/O Mask Toggle Enable Interrupt A Register */ +#define PORTFIO_MASKB 0xFFC00720 /* Port F I/O Mask State Specify Interrupt B Register */ +#define PORTFIO_MASKB_CLEAR 0xFFC00724 /* Port F I/O Mask Disable Interrupt B Register */ +#define PORTFIO_MASKB_SET 0xFFC00728 /* Port F I/O Mask Enable Interrupt B Register */ +#define PORTFIO_MASKB_TOGGLE 0xFFC0072C /* Port F I/O Mask Toggle Enable Interrupt B Register */ +#define PORTFIO_DIR 0xFFC00730 /* Port F I/O Direction Register */ +#define PORTFIO_POLAR 0xFFC00734 /* Port F I/O Source Polarity Register */ +#define PORTFIO_EDGE 0xFFC00738 /* Port F I/O Source Sensitivity Register */ +#define PORTFIO_BOTH 0xFFC0073C /* Port F I/O Set on BOTH Edges Register */ +#define PORTFIO_INEN 0xFFC00740 /* Port F I/O Input Enable Register */ +#define SPORT0_TCR1 0xFFC00800 /* SPORT0 Transmit Configuration 1 Register */ +#define SPORT0_TCR2 0xFFC00804 /* SPORT0 Transmit Configuration 2 Register */ +#define SPORT0_TCLKDIV 0xFFC00808 /* SPORT0 Transmit Clock Divider */ +#define SPORT0_TFSDIV 0xFFC0080C /* SPORT0 Transmit Frame Sync Divider */ +#define SPORT0_TX 0xFFC00810 /* SPORT0 TX Data Register */ +#define SPORT0_RX 0xFFC00818 /* SPORT0 RX Data Register */ +#define SPORT0_RCR1 0xFFC00820 /* SPORT0 Transmit Configuration 1 Register */ +#define SPORT0_RCR2 0xFFC00824 /* SPORT0 Transmit Configuration 2 Register */ +#define SPORT0_RCLKDIV 0xFFC00828 /* SPORT0 Receive Clock Divider */ +#define SPORT0_RFSDIV 0xFFC0082C /* SPORT0 Receive Frame Sync Divider */ +#define SPORT0_STAT 0xFFC00830 /* SPORT0 Status Register */ +#define SPORT0_CHNL 0xFFC00834 /* SPORT0 Current Channel Register */ +#define SPORT0_MCMC1 0xFFC00838 /* SPORT0 Multi-Channel Configuration Register 1 */ +#define SPORT0_MCMC2 0xFFC0083C /* SPORT0 Multi-Channel Configuration Register 2 */ +#define SPORT0_MTCS0 0xFFC00840 /* SPORT0 Multi-Channel Transmit Select Register 0 */ +#define SPORT0_MTCS1 0xFFC00844 /* SPORT0 Multi-Channel Transmit Select Register 1 */ +#define SPORT0_MTCS2 0xFFC00848 /* SPORT0 Multi-Channel Transmit Select Register 2 */ +#define SPORT0_MTCS3 0xFFC0084C /* SPORT0 Multi-Channel Transmit Select Register 3 */ +#define SPORT0_MRCS0 0xFFC00850 /* SPORT0 Multi-Channel Receive Select Register 0 */ +#define SPORT0_MRCS1 0xFFC00854 /* SPORT0 Multi-Channel Receive Select Register 1 */ +#define SPORT0_MRCS2 0xFFC00858 /* SPORT0 Multi-Channel Receive Select Register 2 */ +#define SPORT0_MRCS3 0xFFC0085C /* SPORT0 Multi-Channel Receive Select Register 3 */ +#define SPORT1_TCR1 0xFFC00900 /* SPORT1 Transmit Configuration 1 Register */ +#define SPORT1_TCR2 0xFFC00904 /* SPORT1 Transmit Configuration 2 Register */ +#define SPORT1_TCLKDIV 0xFFC00908 /* SPORT1 Transmit Clock Divider */ +#define SPORT1_TFSDIV 0xFFC0090C /* SPORT1 Transmit Frame Sync Divider */ +#define SPORT1_TX 0xFFC00910 /* SPORT1 TX Data Register */ +#define SPORT1_RX 0xFFC00918 /* SPORT1 RX Data Register */ +#define SPORT1_RCR1 0xFFC00920 /* SPORT1 Transmit Configuration 1 Register */ +#define SPORT1_RCR2 0xFFC00924 /* SPORT1 Transmit Configuration 2 Register */ +#define SPORT1_RCLKDIV 0xFFC00928 /* SPORT1 Receive Clock Divider */ +#define SPORT1_RFSDIV 0xFFC0092C /* SPORT1 Receive Frame Sync Divider */ +#define SPORT1_STAT 0xFFC00930 /* SPORT1 Status Register */ +#define SPORT1_CHNL 0xFFC00934 /* SPORT1 Current Channel Register */ +#define SPORT1_MCMC1 0xFFC00938 /* SPORT1 Multi-Channel Configuration Register 1 */ +#define SPORT1_MCMC2 0xFFC0093C /* SPORT1 Multi-Channel Configuration Register 2 */ +#define SPORT1_MTCS0 0xFFC00940 /* SPORT1 Multi-Channel Transmit Select Register 0 */ +#define SPORT1_MTCS1 0xFFC00944 /* SPORT1 Multi-Channel Transmit Select Register 1 */ +#define SPORT1_MTCS2 0xFFC00948 /* SPORT1 Multi-Channel Transmit Select Register 2 */ +#define SPORT1_MTCS3 0xFFC0094C /* SPORT1 Multi-Channel Transmit Select Register 3 */ +#define SPORT1_MRCS0 0xFFC00950 /* SPORT1 Multi-Channel Receive Select Register 0 */ +#define SPORT1_MRCS1 0xFFC00954 /* SPORT1 Multi-Channel Receive Select Register 1 */ +#define SPORT1_MRCS2 0xFFC00958 /* SPORT1 Multi-Channel Receive Select Register 2 */ +#define SPORT1_MRCS3 0xFFC0095C /* SPORT1 Multi-Channel Receive Select Register 3 */ +#define EBIU_AMGCTL 0xFFC00A00 /* Asynchronous Memory Global Control Register */ +#define EBIU_AMBCTL0 0xFFC00A04 /* Asynchronous Memory Bank Control Register 0 */ +#define EBIU_AMBCTL1 0xFFC00A08 /* Asynchronous Memory Bank Control Register 1 */ +#define EBIU_SDGCTL 0xFFC00A10 /* SDRAM Global Control Register */ +#define EBIU_SDBCTL 0xFFC00A14 /* SDRAM Bank Control Register */ +#define EBIU_SDRRC 0xFFC00A18 /* SDRAM Refresh Rate Control Register */ +#define EBIU_SDSTAT 0xFFC00A1C /* SDRAM Status Register */ +#define DMA0_NEXT_DESC_PTR 0xFFC00C00 /* DMA Channel 0 Next Descriptor Pointer Register */ +#define DMA0_START_ADDR 0xFFC00C04 /* DMA Channel 0 Start Address Register */ +#define DMA0_CONFIG 0xFFC00C08 /* DMA Channel 0 Configuration Register */ +#define DMA0_X_COUNT 0xFFC00C10 /* DMA Channel 0 X Count Register */ +#define DMA0_X_MODIFY 0xFFC00C14 /* DMA Channel 0 X Modify Register */ +#define DMA0_Y_COUNT 0xFFC00C18 /* DMA Channel 0 Y Count Register */ +#define DMA0_Y_MODIFY 0xFFC00C1C /* DMA Channel 0 Y Modify Register */ +#define DMA0_CURR_DESC_PTR 0xFFC00C20 /* DMA Channel 0 Current Descriptor Pointer Register */ +#define DMA0_CURR_ADDR 0xFFC00C24 /* DMA Channel 0 Current Address Register */ +#define DMA0_IRQ_STATUS 0xFFC00C28 /* DMA Channel 0 Interrupt/Status Register */ +#define DMA0_PERIPHERAL_MAP 0xFFC00C2C /* DMA Channel 0 Peripheral Map Register */ +#define DMA0_CURR_X_COUNT 0xFFC00C30 /* DMA Channel 0 Current X Count Register */ +#define DMA0_CURR_Y_COUNT 0xFFC00C38 /* DMA Channel 0 Current Y Count Register */ +#define DMA1_NEXT_DESC_PTR 0xFFC00C40 /* DMA Channel 1 Next Descriptor Pointer Register */ +#define DMA1_START_ADDR 0xFFC00C44 /* DMA Channel 1 Start Address Register */ +#define DMA1_CONFIG 0xFFC00C48 /* DMA Channel 1 Configuration Register */ +#define DMA1_X_COUNT 0xFFC00C50 /* DMA Channel 1 X Count Register */ +#define DMA1_X_MODIFY 0xFFC00C54 /* DMA Channel 1 X Modify Register */ +#define DMA1_Y_COUNT 0xFFC00C58 /* DMA Channel 1 Y Count Register */ +#define DMA1_Y_MODIFY 0xFFC00C5C /* DMA Channel 1 Y Modify Register */ +#define DMA1_CURR_DESC_PTR 0xFFC00C60 /* DMA Channel 1 Current Descriptor Pointer Register */ +#define DMA1_CURR_ADDR 0xFFC00C64 /* DMA Channel 1 Current Address Register */ +#define DMA1_IRQ_STATUS 0xFFC00C68 /* DMA Channel 1 Interrupt/Status Register */ +#define DMA1_PERIPHERAL_MAP 0xFFC00C6C /* DMA Channel 1 Peripheral Map Register */ +#define DMA1_CURR_X_COUNT 0xFFC00C70 /* DMA Channel 1 Current X Count Register */ +#define DMA1_CURR_Y_COUNT 0xFFC00C78 /* DMA Channel 1 Current Y Count Register */ +#define DMA2_NEXT_DESC_PTR 0xFFC00C80 /* DMA Channel 2 Next Descriptor Pointer Register */ +#define DMA2_START_ADDR 0xFFC00C84 /* DMA Channel 2 Start Address Register */ +#define DMA2_CONFIG 0xFFC00C88 /* DMA Channel 2 Configuration Register */ +#define DMA2_X_COUNT 0xFFC00C90 /* DMA Channel 2 X Count Register */ +#define DMA2_X_MODIFY 0xFFC00C94 /* DMA Channel 2 X Modify Register */ +#define DMA2_Y_COUNT 0xFFC00C98 /* DMA Channel 2 Y Count Register */ +#define DMA2_Y_MODIFY 0xFFC00C9C /* DMA Channel 2 Y Modify Register */ +#define DMA2_CURR_DESC_PTR 0xFFC00CA0 /* DMA Channel 2 Current Descriptor Pointer Register */ +#define DMA2_CURR_ADDR 0xFFC00CA4 /* DMA Channel 2 Current Address Register */ +#define DMA2_IRQ_STATUS 0xFFC00CA8 /* DMA Channel 2 Interrupt/Status Register */ +#define DMA2_PERIPHERAL_MAP 0xFFC00CAC /* DMA Channel 2 Peripheral Map Register */ +#define DMA2_CURR_X_COUNT 0xFFC00CB0 /* DMA Channel 2 Current X Count Register */ +#define DMA2_CURR_Y_COUNT 0xFFC00CB8 /* DMA Channel 2 Current Y Count Register */ +#define DMA3_NEXT_DESC_PTR 0xFFC00CC0 /* DMA Channel 3 Next Descriptor Pointer Register */ +#define DMA3_START_ADDR 0xFFC00CC4 /* DMA Channel 3 Start Address Register */ +#define DMA3_CONFIG 0xFFC00CC8 /* DMA Channel 3 Configuration Register */ +#define DMA3_X_COUNT 0xFFC00CD0 /* DMA Channel 3 X Count Register */ +#define DMA3_X_MODIFY 0xFFC00CD4 /* DMA Channel 3 X Modify Register */ +#define DMA3_Y_COUNT 0xFFC00CD8 /* DMA Channel 3 Y Count Register */ +#define DMA3_Y_MODIFY 0xFFC00CDC /* DMA Channel 3 Y Modify Register */ +#define DMA3_CURR_DESC_PTR 0xFFC00CE0 /* DMA Channel 3 Current Descriptor Pointer Register */ +#define DMA3_CURR_ADDR 0xFFC00CE4 /* DMA Channel 3 Current Address Register */ +#define DMA3_IRQ_STATUS 0xFFC00CE8 /* DMA Channel 3 Interrupt/Status Register */ +#define DMA3_PERIPHERAL_MAP 0xFFC00CEC /* DMA Channel 3 Peripheral Map Register */ +#define DMA3_CURR_X_COUNT 0xFFC00CF0 /* DMA Channel 3 Current X Count Register */ +#define DMA3_CURR_Y_COUNT 0xFFC00CF8 /* DMA Channel 3 Current Y Count Register */ +#define DMA4_NEXT_DESC_PTR 0xFFC00D00 /* DMA Channel 4 Next Descriptor Pointer Register */ +#define DMA4_START_ADDR 0xFFC00D04 /* DMA Channel 4 Start Address Register */ +#define DMA4_CONFIG 0xFFC00D08 /* DMA Channel 4 Configuration Register */ +#define DMA4_X_COUNT 0xFFC00D10 /* DMA Channel 4 X Count Register */ +#define DMA4_X_MODIFY 0xFFC00D14 /* DMA Channel 4 X Modify Register */ +#define DMA4_Y_COUNT 0xFFC00D18 /* DMA Channel 4 Y Count Register */ +#define DMA4_Y_MODIFY 0xFFC00D1C /* DMA Channel 4 Y Modify Register */ +#define DMA4_CURR_DESC_PTR 0xFFC00D20 /* DMA Channel 4 Current Descriptor Pointer Register */ +#define DMA4_CURR_ADDR 0xFFC00D24 /* DMA Channel 4 Current Address Register */ +#define DMA4_IRQ_STATUS 0xFFC00D28 /* DMA Channel 4 Interrupt/Status Register */ +#define DMA4_PERIPHERAL_MAP 0xFFC00D2C /* DMA Channel 4 Peripheral Map Register */ +#define DMA4_CURR_X_COUNT 0xFFC00D30 /* DMA Channel 4 Current X Count Register */ +#define DMA4_CURR_Y_COUNT 0xFFC00D38 /* DMA Channel 4 Current Y Count Register */ +#define DMA5_NEXT_DESC_PTR 0xFFC00D40 /* DMA Channel 5 Next Descriptor Pointer Register */ +#define DMA5_START_ADDR 0xFFC00D44 /* DMA Channel 5 Start Address Register */ +#define DMA5_CONFIG 0xFFC00D48 /* DMA Channel 5 Configuration Register */ +#define DMA5_X_COUNT 0xFFC00D50 /* DMA Channel 5 X Count Register */ +#define DMA5_X_MODIFY 0xFFC00D54 /* DMA Channel 5 X Modify Register */ +#define DMA5_Y_COUNT 0xFFC00D58 /* DMA Channel 5 Y Count Register */ +#define DMA5_Y_MODIFY 0xFFC00D5C /* DMA Channel 5 Y Modify Register */ +#define DMA5_CURR_DESC_PTR 0xFFC00D60 /* DMA Channel 5 Current Descriptor Pointer Register */ +#define DMA5_CURR_ADDR 0xFFC00D64 /* DMA Channel 5 Current Address Register */ +#define DMA5_IRQ_STATUS 0xFFC00D68 /* DMA Channel 5 Interrupt/Status Register */ +#define DMA5_PERIPHERAL_MAP 0xFFC00D6C /* DMA Channel 5 Peripheral Map Register */ +#define DMA5_CURR_X_COUNT 0xFFC00D70 /* DMA Channel 5 Current X Count Register */ +#define DMA5_CURR_Y_COUNT 0xFFC00D78 /* DMA Channel 5 Current Y Count Register */ +#define DMA6_NEXT_DESC_PTR 0xFFC00D80 /* DMA Channel 6 Next Descriptor Pointer Register */ +#define DMA6_START_ADDR 0xFFC00D84 /* DMA Channel 6 Start Address Register */ +#define DMA6_CONFIG 0xFFC00D88 /* DMA Channel 6 Configuration Register */ +#define DMA6_X_COUNT 0xFFC00D90 /* DMA Channel 6 X Count Register */ +#define DMA6_X_MODIFY 0xFFC00D94 /* DMA Channel 6 X Modify Register */ +#define DMA6_Y_COUNT 0xFFC00D98 /* DMA Channel 6 Y Count Register */ +#define DMA6_Y_MODIFY 0xFFC00D9C /* DMA Channel 6 Y Modify Register */ +#define DMA6_CURR_DESC_PTR 0xFFC00DA0 /* DMA Channel 6 Current Descriptor Pointer Register */ +#define DMA6_CURR_ADDR 0xFFC00DA4 /* DMA Channel 6 Current Address Register */ +#define DMA6_IRQ_STATUS 0xFFC00DA8 /* DMA Channel 6 Interrupt/Status Register */ +#define DMA6_PERIPHERAL_MAP 0xFFC00DAC /* DMA Channel 6 Peripheral Map Register */ +#define DMA6_CURR_X_COUNT 0xFFC00DB0 /* DMA Channel 6 Current X Count Register */ +#define DMA6_CURR_Y_COUNT 0xFFC00DB8 /* DMA Channel 6 Current Y Count Register */ +#define DMA7_NEXT_DESC_PTR 0xFFC00DC0 /* DMA Channel 7 Next Descriptor Pointer Register */ +#define DMA7_START_ADDR 0xFFC00DC4 /* DMA Channel 7 Start Address Register */ +#define DMA7_CONFIG 0xFFC00DC8 /* DMA Channel 7 Configuration Register */ +#define DMA7_X_COUNT 0xFFC00DD0 /* DMA Channel 7 X Count Register */ +#define DMA7_X_MODIFY 0xFFC00DD4 /* DMA Channel 7 X Modify Register */ +#define DMA7_Y_COUNT 0xFFC00DD8 /* DMA Channel 7 Y Count Register */ +#define DMA7_Y_MODIFY 0xFFC00DDC /* DMA Channel 7 Y Modify Register */ +#define DMA7_CURR_DESC_PTR 0xFFC00DE0 /* DMA Channel 7 Current Descriptor Pointer Register */ +#define DMA7_CURR_ADDR 0xFFC00DE4 /* DMA Channel 7 Current Address Register */ +#define DMA7_IRQ_STATUS 0xFFC00DE8 /* DMA Channel 7 Interrupt/Status Register */ +#define DMA7_PERIPHERAL_MAP 0xFFC00DEC /* DMA Channel 7 Peripheral Map Register */ +#define DMA7_CURR_X_COUNT 0xFFC00DF0 /* DMA Channel 7 Current X Count Register */ +#define DMA7_CURR_Y_COUNT 0xFFC00DF8 /* DMA Channel 7 Current Y Count Register */ +#define DMA8_NEXT_DESC_PTR 0xFFC00E00 /* DMA Channel 8 Next Descriptor Pointer Register */ +#define DMA8_START_ADDR 0xFFC00E04 /* DMA Channel 8 Start Address Register */ +#define DMA8_CONFIG 0xFFC00E08 /* DMA Channel 8 Configuration Register */ +#define DMA8_X_COUNT 0xFFC00E10 /* DMA Channel 8 X Count Register */ +#define DMA8_X_MODIFY 0xFFC00E14 /* DMA Channel 8 X Modify Register */ +#define DMA8_Y_COUNT 0xFFC00E18 /* DMA Channel 8 Y Count Register */ +#define DMA8_Y_MODIFY 0xFFC00E1C /* DMA Channel 8 Y Modify Register */ +#define DMA8_CURR_DESC_PTR 0xFFC00E20 /* DMA Channel 8 Current Descriptor Pointer Register */ +#define DMA8_CURR_ADDR 0xFFC00E24 /* DMA Channel 8 Current Address Register */ +#define DMA8_IRQ_STATUS 0xFFC00E28 /* DMA Channel 8 Interrupt/Status Register */ +#define DMA8_PERIPHERAL_MAP 0xFFC00E2C /* DMA Channel 8 Peripheral Map Register */ +#define DMA8_CURR_X_COUNT 0xFFC00E30 /* DMA Channel 8 Current X Count Register */ +#define DMA8_CURR_Y_COUNT 0xFFC00E38 /* DMA Channel 8 Current Y Count Register */ +#define DMA9_NEXT_DESC_PTR 0xFFC00E40 /* DMA Channel 9 Next Descriptor Pointer Register */ +#define DMA9_START_ADDR 0xFFC00E44 /* DMA Channel 9 Start Address Register */ +#define DMA9_CONFIG 0xFFC00E48 /* DMA Channel 9 Configuration Register */ +#define DMA9_X_COUNT 0xFFC00E50 /* DMA Channel 9 X Count Register */ +#define DMA9_X_MODIFY 0xFFC00E54 /* DMA Channel 9 X Modify Register */ +#define DMA9_Y_COUNT 0xFFC00E58 /* DMA Channel 9 Y Count Register */ +#define DMA9_Y_MODIFY 0xFFC00E5C /* DMA Channel 9 Y Modify Register */ +#define DMA9_CURR_DESC_PTR 0xFFC00E60 /* DMA Channel 9 Current Descriptor Pointer Register */ +#define DMA9_CURR_ADDR 0xFFC00E64 /* DMA Channel 9 Current Address Register */ +#define DMA9_IRQ_STATUS 0xFFC00E68 /* DMA Channel 9 Interrupt/Status Register */ +#define DMA9_PERIPHERAL_MAP 0xFFC00E6C /* DMA Channel 9 Peripheral Map Register */ +#define DMA9_CURR_X_COUNT 0xFFC00E70 /* DMA Channel 9 Current X Count Register */ +#define DMA9_CURR_Y_COUNT 0xFFC00E78 /* DMA Channel 9 Current Y Count Register */ +#define DMA10_NEXT_DESC_PTR 0xFFC00E80 /* DMA Channel 10 Next Descriptor Pointer Register */ +#define DMA10_START_ADDR 0xFFC00E84 /* DMA Channel 10 Start Address Register */ +#define DMA10_CONFIG 0xFFC00E88 /* DMA Channel 10 Configuration Register */ +#define DMA10_X_COUNT 0xFFC00E90 /* DMA Channel 10 X Count Register */ +#define DMA10_X_MODIFY 0xFFC00E94 /* DMA Channel 10 X Modify Register */ +#define DMA10_Y_COUNT 0xFFC00E98 /* DMA Channel 10 Y Count Register */ +#define DMA10_Y_MODIFY 0xFFC00E9C /* DMA Channel 10 Y Modify Register */ +#define DMA10_CURR_DESC_PTR 0xFFC00EA0 /* DMA Channel 10 Current Descriptor Pointer Register */ +#define DMA10_CURR_ADDR 0xFFC00EA4 /* DMA Channel 10 Current Address Register */ +#define DMA10_IRQ_STATUS 0xFFC00EA8 /* DMA Channel 10 Interrupt/Status Register */ +#define DMA10_PERIPHERAL_MAP 0xFFC00EAC /* DMA Channel 10 Peripheral Map Register */ +#define DMA10_CURR_X_COUNT 0xFFC00EB0 /* DMA Channel 10 Current X Count Register */ +#define DMA10_CURR_Y_COUNT 0xFFC00EB8 /* DMA Channel 10 Current Y Count Register */ +#define DMA11_NEXT_DESC_PTR 0xFFC00EC0 /* DMA Channel 11 Next Descriptor Pointer Register */ +#define DMA11_START_ADDR 0xFFC00EC4 /* DMA Channel 11 Start Address Register */ +#define DMA11_CONFIG 0xFFC00EC8 /* DMA Channel 11 Configuration Register */ +#define DMA11_X_COUNT 0xFFC00ED0 /* DMA Channel 11 X Count Register */ +#define DMA11_X_MODIFY 0xFFC00ED4 /* DMA Channel 11 X Modify Register */ +#define DMA11_Y_COUNT 0xFFC00ED8 /* DMA Channel 11 Y Count Register */ +#define DMA11_Y_MODIFY 0xFFC00EDC /* DMA Channel 11 Y Modify Register */ +#define DMA11_CURR_DESC_PTR 0xFFC00EE0 /* DMA Channel 11 Current Descriptor Pointer Register */ +#define DMA11_CURR_ADDR 0xFFC00EE4 /* DMA Channel 11 Current Address Register */ +#define DMA11_IRQ_STATUS 0xFFC00EE8 /* DMA Channel 11 Interrupt/Status Register */ +#define DMA11_PERIPHERAL_MAP 0xFFC00EEC /* DMA Channel 11 Peripheral Map Register */ +#define DMA11_CURR_X_COUNT 0xFFC00EF0 /* DMA Channel 11 Current X Count Register */ +#define DMA11_CURR_Y_COUNT 0xFFC00EF8 /* DMA Channel 11 Current Y Count Register */ +#define MDMA_S0_NEXT_DESC_PTR 0xFFC00F40 /* MemDMA Stream 0 Source Next Descriptor Pointer Register */ +#define MDMA_S0_START_ADDR 0xFFC00F44 /* MemDMA Stream 0 Source Start Address Register */ +#define MDMA_S0_CONFIG 0xFFC00F48 /* MemDMA Stream 0 Source Configuration Register */ +#define MDMA_S0_X_COUNT 0xFFC00F50 /* MemDMA Stream 0 Source X Count Register */ +#define MDMA_S0_X_MODIFY 0xFFC00F54 /* MemDMA Stream 0 Source X Modify Register */ +#define MDMA_S0_Y_COUNT 0xFFC00F58 /* MemDMA Stream 0 Source Y Count Register */ +#define MDMA_S0_Y_MODIFY 0xFFC00F5C /* MemDMA Stream 0 Source Y Modify Register */ +#define MDMA_S0_CURR_DESC_PTR 0xFFC00F60 /* MemDMA Stream 0 Source Current Descriptor Pointer Register */ +#define MDMA_S0_CURR_ADDR 0xFFC00F64 /* MemDMA Stream 0 Source Current Address Register */ +#define MDMA_S0_IRQ_STATUS 0xFFC00F68 /* MemDMA Stream 0 Source Interrupt/Status Register */ +#define MDMA_S0_PERIPHERAL_MAP 0xFFC00F6C /* MemDMA Stream 0 Source Peripheral Map Register */ +#define MDMA_S0_CURR_X_COUNT 0xFFC00F70 /* MemDMA Stream 0 Source Current X Count Register */ +#define MDMA_S0_CURR_Y_COUNT 0xFFC00F78 /* MemDMA Stream 0 Source Current Y Count Register */ +#define MDMA_D0_NEXT_DESC_PTR 0xFFC00F00 /* MemDMA Stream 0 Destination Next Descriptor Pointer Register */ +#define MDMA_D0_START_ADDR 0xFFC00F04 /* MemDMA Stream 0 Destination Start Address Register */ +#define MDMA_D0_CONFIG 0xFFC00F08 /* MemDMA Stream 0 Destination Configuration Register */ +#define MDMA_D0_X_COUNT 0xFFC00F10 /* MemDMA Stream 0 Destination X Count Register */ +#define MDMA_D0_X_MODIFY 0xFFC00F14 /* MemDMA Stream 0 Destination X Modify Register */ +#define MDMA_D0_Y_COUNT 0xFFC00F18 /* MemDMA Stream 0 Destination Y Count Register */ +#define MDMA_D0_Y_MODIFY 0xFFC00F1C /* MemDMA Stream 0 Destination Y Modify Register */ +#define MDMA_D0_CURR_DESC_PTR 0xFFC00F20 /* MemDMA Stream 0 Destination Current Descriptor Pointer Register */ +#define MDMA_D0_CURR_ADDR 0xFFC00F24 /* MemDMA Stream 0 Destination Current Address Register */ +#define MDMA_D0_IRQ_STATUS 0xFFC00F28 /* MemDMA Stream 0 Destination Interrupt/Status Register */ +#define MDMA_D0_PERIPHERAL_MAP 0xFFC00F2C /* MemDMA Stream 0 Destination Peripheral Map Register */ +#define MDMA_D0_CURR_X_COUNT 0xFFC00F30 /* MemDMA Stream 0 Destination Current X Count Register */ +#define MDMA_D0_CURR_Y_COUNT 0xFFC00F38 /* MemDMA Stream 0 Destination Current Y Count Register */ +#define MDMA_S1_NEXT_DESC_PTR 0xFFC00FC0 /* MemDMA Stream 1 Source Next Descriptor Pointer Register */ +#define MDMA_S1_START_ADDR 0xFFC00FC4 /* MemDMA Stream 1 Source Start Address Register */ +#define MDMA_S1_CONFIG 0xFFC00FC8 /* MemDMA Stream 1 Source Configuration Register */ +#define MDMA_S1_X_COUNT 0xFFC00FD0 /* MemDMA Stream 1 Source X Count Register */ +#define MDMA_S1_X_MODIFY 0xFFC00FD4 /* MemDMA Stream 1 Source X Modify Register */ +#define MDMA_S1_Y_COUNT 0xFFC00FD8 /* MemDMA Stream 1 Source Y Count Register */ +#define MDMA_S1_Y_MODIFY 0xFFC00FDC /* MemDMA Stream 1 Source Y Modify Register */ +#define MDMA_S1_CURR_DESC_PTR 0xFFC00FE0 /* MemDMA Stream 1 Source Current Descriptor Pointer Register */ +#define MDMA_S1_CURR_ADDR 0xFFC00FE4 /* MemDMA Stream 1 Source Current Address Register */ +#define MDMA_S1_IRQ_STATUS 0xFFC00FE8 /* MemDMA Stream 1 Source Interrupt/Status Register */ +#define MDMA_S1_PERIPHERAL_MAP 0xFFC00FEC /* MemDMA Stream 1 Source Peripheral Map Register */ +#define MDMA_S1_CURR_X_COUNT 0xFFC00FF0 /* MemDMA Stream 1 Source Current X Count Register */ +#define MDMA_S1_CURR_Y_COUNT 0xFFC00FF8 /* MemDMA Stream 1 Source Current Y Count Register */ +#define MDMA_D1_NEXT_DESC_PTR 0xFFC00F80 /* MemDMA Stream 1 Destination Next Descriptor Pointer Register */ +#define MDMA_D1_START_ADDR 0xFFC00F84 /* MemDMA Stream 1 Destination Start Address Register */ +#define MDMA_D1_CONFIG 0xFFC00F88 /* MemDMA Stream 1 Destination Configuration Register */ +#define MDMA_D1_X_COUNT 0xFFC00F90 /* MemDMA Stream 1 Destination X Count Register */ +#define MDMA_D1_X_MODIFY 0xFFC00F94 /* MemDMA Stream 1 Destination X Modify Register */ +#define MDMA_D1_Y_COUNT 0xFFC00F98 /* MemDMA Stream 1 Destination Y Count Register */ +#define MDMA_D1_Y_MODIFY 0xFFC00F9C /* MemDMA Stream 1 Destination Y Modify Register */ +#define MDMA_D1_CURR_DESC_PTR 0xFFC00FA0 /* MemDMA Stream 1 Destination Current Descriptor Pointer Register */ +#define MDMA_D1_CURR_ADDR 0xFFC00FA4 /* MemDMA Stream 1 Destination Current Address Register */ +#define MDMA_D1_IRQ_STATUS 0xFFC00FA8 /* MemDMA Stream 1 Destination Interrupt/Status Register */ +#define MDMA_D1_PERIPHERAL_MAP 0xFFC00FAC /* MemDMA Stream 1 Destination Peripheral Map Register */ +#define MDMA_D1_CURR_X_COUNT 0xFFC00FB0 /* MemDMA Stream 1 Destination Current X Count Register */ +#define MDMA_D1_CURR_Y_COUNT 0xFFC00FB8 /* MemDMA Stream 1 Destination Current Y Count Register */ +#define PPI_CONTROL 0xFFC01000 /* PPI Control Register */ +#define PPI_STATUS 0xFFC01004 /* PPI Status Register */ +#define PPI_COUNT 0xFFC01008 /* PPI Transfer Count Register */ +#define PPI_DELAY 0xFFC0100C /* PPI Delay Count Register */ +#define PPI_FRAME 0xFFC01010 /* PPI Frame Length Register */ +#define TWI_CLKDIV 0xFFC01400 /* Serial Clock Divider Register */ +#define TWI_CONTROL 0xFFC01404 /* TWI Control Register */ +#define TWI_SLAVE_CTL 0xFFC01408 /* Slave Mode Control Register */ +#define TWI_SLAVE_STAT 0xFFC0140C /* Slave Mode Status Register */ +#define TWI_SLAVE_ADDR 0xFFC01410 /* Slave Mode Address Register */ +#define TWI_MASTER_CTL 0xFFC01414 /* Master Mode Control Register */ +#define TWI_MASTER_STAT 0xFFC01418 /* Master Mode Status Register */ +#define TWI_MASTER_ADDR 0xFFC0141C /* Master Mode Address Register */ +#define TWI_INT_STAT 0xFFC01420 /* TWI Interrupt Status Register */ +#define TWI_INT_MASK 0xFFC01424 /* TWI Master Interrupt Mask Register */ +#define TWI_FIFO_CTL 0xFFC01428 /* FIFO Control Register */ +#define TWI_FIFO_STAT 0xFFC0142C /* FIFO Status Register */ +#define TWI_XMT_DATA8 0xFFC01480 /* FIFO Transmit Data Single Byte Register */ +#define TWI_XMT_DATA16 0xFFC01484 /* FIFO Transmit Data Double Byte Register */ +#define TWI_RCV_DATA8 0xFFC01488 /* FIFO Receive Data Single Byte Register */ +#define TWI_RCV_DATA16 0xFFC0148C /* FIFO Receive Data Double Byte Register */ +#define PORTGIO 0xFFC01500 /* Port G I/O Pin State Specify Register */ +#define PORTGIO_CLEAR 0xFFC01504 /* Port G I/O Peripheral Interrupt Clear Register */ +#define PORTGIO_SET 0xFFC01508 /* Port G I/O Peripheral Interrupt Set Register */ +#define PORTGIO_TOGGLE 0xFFC0150C /* Port G I/O Pin State Toggle Register */ +#define PORTGIO_MASKA 0xFFC01510 /* Port G I/O Mask State Specify Interrupt A Register */ +#define PORTGIO_MASKA_CLEAR 0xFFC01514 /* Port G I/O Mask Disable Interrupt A Register */ +#define PORTGIO_MASKA_SET 0xFFC01518 /* Port G I/O Mask Enable Interrupt A Register */ +#define PORTGIO_MASKA_TOGGLE 0xFFC0151C /* Port G I/O Mask Toggle Enable Interrupt A Register */ +#define PORTGIO_MASKB 0xFFC01520 /* Port G I/O Mask State Specify Interrupt B Register */ +#define PORTGIO_MASKB_CLEAR 0xFFC01524 /* Port G I/O Mask Disable Interrupt B Register */ +#define PORTGIO_MASKB_SET 0xFFC01528 /* Port G I/O Mask Enable Interrupt B Register */ +#define PORTGIO_MASKB_TOGGLE 0xFFC0152C /* Port G I/O Mask Toggle Enable Interrupt B Register */ +#define PORTGIO_DIR 0xFFC01530 /* Port G I/O Direction Register */ +#define PORTGIO_POLAR 0xFFC01534 /* Port G I/O Source Polarity Register */ +#define PORTGIO_EDGE 0xFFC01538 /* Port G I/O Source Sensitivity Register */ +#define PORTGIO_BOTH 0xFFC0153C /* Port G I/O Set on BOTH Edges Register */ +#define PORTGIO_INEN 0xFFC01540 /* Port G I/O Input Enable Register */ +#define PORTHIO 0xFFC01700 /* Port H I/O Pin State Specify Register */ +#define PORTHIO_CLEAR 0xFFC01704 /* Port H I/O Peripheral Interrupt Clear Register */ +#define PORTHIO_SET 0xFFC01708 /* Port H I/O Peripheral Interrupt Set Register */ +#define PORTHIO_TOGGLE 0xFFC0170C /* Port H I/O Pin State Toggle Register */ +#define PORTHIO_MASKA 0xFFC01710 /* Port H I/O Mask State Specify Interrupt A Register */ +#define PORTHIO_MASKA_CLEAR 0xFFC01714 /* Port H I/O Mask Disable Interrupt A Register */ +#define PORTHIO_MASKA_SET 0xFFC01718 /* Port H I/O Mask Enable Interrupt A Register */ +#define PORTHIO_MASKA_TOGGLE 0xFFC0171C /* Port H I/O Mask Toggle Enable Interrupt A Register */ +#define PORTHIO_MASKB 0xFFC01720 /* Port H I/O Mask State Specify Interrupt B Register */ +#define PORTHIO_MASKB_CLEAR 0xFFC01724 /* Port H I/O Mask Disable Interrupt B Register */ +#define PORTHIO_MASKB_SET 0xFFC01728 /* Port H I/O Mask Enable Interrupt B Register */ +#define PORTHIO_MASKB_TOGGLE 0xFFC0172C /* Port H I/O Mask Toggle Enable Interrupt B Register */ +#define PORTHIO_DIR 0xFFC01730 /* Port H I/O Direction Register */ +#define PORTHIO_POLAR 0xFFC01734 /* Port H I/O Source Polarity Register */ +#define PORTHIO_EDGE 0xFFC01738 /* Port H I/O Source Sensitivity Register */ +#define PORTHIO_BOTH 0xFFC0173C /* Port H I/O Set on BOTH Edges Register */ +#define PORTHIO_INEN 0xFFC01740 /* Port H I/O Input Enable Register */ +#define UART1_THR 0xFFC02000 /* Transmit Holding register */ +#define UART1_RBR 0xFFC02000 /* Receive Buffer register */ +#define UART1_DLL 0xFFC02000 /* Divisor Latch (Low-Byte) */ +#define UART1_IER 0xFFC02004 /* Interrupt Enable Register */ +#define UART1_DLH 0xFFC02004 /* Divisor Latch (High-Byte) */ +#define UART1_IIR 0xFFC02008 /* Interrupt Identification Register */ +#define UART1_LCR 0xFFC0200C /* Line Control Register */ +#define UART1_MCR 0xFFC02010 /* Modem Control Register */ +#define UART1_LSR 0xFFC02014 /* Line Status Register */ +#define UART1_MSR 0xFFC02018 /* Modem Status Register */ +#define UART1_SCR 0xFFC0201C /* SCR Scratch Register */ +#define UART1_GCTL 0xFFC02024 /* Global Control Register */ +#define CAN_MC1 0xFFC02A00 /* Mailbox config reg 1 */ +#define CAN_MD1 0xFFC02A04 /* Mailbox direction reg 1 */ +#define CAN_TRS1 0xFFC02A08 /* Transmit Request Set reg 1 */ +#define CAN_TRR1 0xFFC02A0C /* Transmit Request Reset reg 1 */ +#define CAN_TA1 0xFFC02A10 /* Transmit Acknowledge reg 1 */ +#define CAN_AA1 0xFFC02A14 /* Transmit Abort Acknowledge reg 1 */ +#define CAN_RMP1 0xFFC02A18 /* Receive Message Pending reg 1 */ +#define CAN_RML1 0xFFC02A1C /* Receive Message Lost reg 1 */ +#define CAN_MBTIF1 0xFFC02A20 /* Mailbox Transmit Interrupt Flag reg 1 */ +#define CAN_MBRIF1 0xFFC02A24 /* Mailbox Receive Interrupt Flag reg 1 */ +#define CAN_MBIM1 0xFFC02A28 /* Mailbox Interrupt Mask reg 1 */ +#define CAN_RFH1 0xFFC02A2C /* Remote Frame Handling reg 1 */ +#define CAN_OPSS1 0xFFC02A30 /* Overwrite Protection Single Shot Xmission reg 1 */ +#define CAN_MC2 0xFFC02A40 /* Mailbox config reg 2 */ +#define CAN_MD2 0xFFC02A44 /* Mailbox direction reg 2 */ +#define CAN_TRS2 0xFFC02A48 /* Transmit Request Set reg 2 */ +#define CAN_TRR2 0xFFC02A4C /* Transmit Request Reset reg 2 */ +#define CAN_TA2 0xFFC02A50 /* Transmit Acknowledge reg 2 */ +#define CAN_AA2 0xFFC02A54 /* Transmit Abort Acknowledge reg 2 */ +#define CAN_RMP2 0xFFC02A58 /* Receive Message Pending reg 2 */ +#define CAN_RML2 0xFFC02A5C /* Receive Message Lost reg 2 */ +#define CAN_MBTIF2 0xFFC02A60 /* Mailbox Transmit Interrupt Flag reg 2 */ +#define CAN_MBRIF2 0xFFC02A64 /* Mailbox Receive Interrupt Flag reg 2 */ +#define CAN_MBIM2 0xFFC02A68 /* Mailbox Interrupt Mask reg 2 */ +#define CAN_RFH2 0xFFC02A6C /* Remote Frame Handling reg 2 */ +#define CAN_OPSS2 0xFFC02A70 /* Overwrite Protection Single Shot Xmission reg 2 */ +#define CAN_CLOCK 0xFFC02A80 /* Bit Timing Configuration register 0 */ +#define CAN_TIMING 0xFFC02A84 /* Bit Timing Configuration register 1 */ +#define CAN_DEBUG 0xFFC02A88 /* Config register */ +#define CAN_STATUS 0xFFC02A8C /* Global Status Register */ +#define CAN_CEC 0xFFC02A90 /* Error Counter Register */ +#define CAN_GIS 0xFFC02A94 /* Global Interrupt Status Register */ +#define CAN_GIM 0xFFC02A98 /* Global Interrupt Mask Register */ +#define CAN_GIF 0xFFC02A9C /* Global Interrupt Flag Register */ +#define CAN_CONTROL 0xFFC02AA0 /* Master Control Register */ +#define CAN_INTR 0xFFC02AA4 /* Interrupt Pending Register */ +#define CAN_VERSION 0xFFC02AA8 /* Version Code Register */ +#define CAN_MBTD 0xFFC02AAC /* Mailbox Temporary Disable Feature */ +#define CAN_EWR 0xFFC02AB0 /* Programmable Warning Level */ +#define CAN_ESR 0xFFC02AB4 /* Error Status Register */ +#define CAN_UCREG 0xFFC02AC0 /* Universal Counter Register/Capture Register */ +#define CAN_UCCNT 0xFFC02AC4 /* Universal Counter */ +#define CAN_UCRC 0xFFC02AC8 /* Universal Counter Force Reload Register */ +#define CAN_UCCNF 0xFFC02ACC /* Universal Counter Configuration Register */ +#define CAN_VERSION2 0xFFC02AD4 /* Version Code Register 2 */ +#define CAN_AM00L 0xFFC02B00 /* Mailbox 0 Low Acceptance Mask */ +#define CAN_AM00H 0xFFC02B04 /* Mailbox 0 High Acceptance Mask */ +#define CAN_AM01L 0xFFC02B08 /* Mailbox 1 Low Acceptance Mask */ +#define CAN_AM01H 0xFFC02B0C /* Mailbox 1 High Acceptance Mask */ +#define CAN_AM02L 0xFFC02B10 /* Mailbox 2 Low Acceptance Mask */ +#define CAN_AM02H 0xFFC02B14 /* Mailbox 2 High Acceptance Mask */ +#define CAN_AM03L 0xFFC02B18 /* Mailbox 3 Low Acceptance Mask */ +#define CAN_AM03H 0xFFC02B1C /* Mailbox 3 High Acceptance Mask */ +#define CAN_AM04L 0xFFC02B20 /* Mailbox 4 Low Acceptance Mask */ +#define CAN_AM04H 0xFFC02B24 /* Mailbox 4 High Acceptance Mask */ +#define CAN_AM05L 0xFFC02B28 /* Mailbox 5 Low Acceptance Mask */ +#define CAN_AM05H 0xFFC02B2C /* Mailbox 5 High Acceptance Mask */ +#define CAN_AM06L 0xFFC02B30 /* Mailbox 6 Low Acceptance Mask */ +#define CAN_AM06H 0xFFC02B34 /* Mailbox 6 High Acceptance Mask */ +#define CAN_AM07L 0xFFC02B38 /* Mailbox 7 Low Acceptance Mask */ +#define CAN_AM07H 0xFFC02B3C /* Mailbox 7 High Acceptance Mask */ +#define CAN_AM08L 0xFFC02B40 /* Mailbox 8 Low Acceptance Mask */ +#define CAN_AM08H 0xFFC02B44 /* Mailbox 8 High Acceptance Mask */ +#define CAN_AM09L 0xFFC02B48 /* Mailbox 9 Low Acceptance Mask */ +#define CAN_AM09H 0xFFC02B4C /* Mailbox 9 High Acceptance Mask */ +#define CAN_AM10L 0xFFC02B50 /* Mailbox 10 Low Acceptance Mask */ +#define CAN_AM10H 0xFFC02B54 /* Mailbox 10 High Acceptance Mask */ +#define CAN_AM11L 0xFFC02B58 /* Mailbox 11 Low Acceptance Mask */ +#define CAN_AM11H 0xFFC02B5C /* Mailbox 11 High Acceptance Mask */ +#define CAN_AM12L 0xFFC02B60 /* Mailbox 12 Low Acceptance Mask */ +#define CAN_AM12H 0xFFC02B64 /* Mailbox 12 High Acceptance Mask */ +#define CAN_AM13L 0xFFC02B68 /* Mailbox 13 Low Acceptance Mask */ +#define CAN_AM13H 0xFFC02B6C /* Mailbox 13 High Acceptance Mask */ +#define CAN_AM14L 0xFFC02B70 /* Mailbox 14 Low Acceptance Mask */ +#define CAN_AM14H 0xFFC02B74 /* Mailbox 14 High Acceptance Mask */ +#define CAN_AM15L 0xFFC02B78 /* Mailbox 15 Low Acceptance Mask */ +#define CAN_AM15H 0xFFC02B7C /* Mailbox 15 High Acceptance Mask */ +#define CAN_AM16L 0xFFC02B80 /* Mailbox 16 Low Acceptance Mask */ +#define CAN_AM16H 0xFFC02B84 /* Mailbox 16 High Acceptance Mask */ +#define CAN_AM17L 0xFFC02B88 /* Mailbox 17 Low Acceptance Mask */ +#define CAN_AM17H 0xFFC02B8C /* Mailbox 17 High Acceptance Mask */ +#define CAN_AM18L 0xFFC02B90 /* Mailbox 18 Low Acceptance Mask */ +#define CAN_AM18H 0xFFC02B94 /* Mailbox 18 High Acceptance Mask */ +#define CAN_AM19L 0xFFC02B98 /* Mailbox 19 Low Acceptance Mask */ +#define CAN_AM19H 0xFFC02B9C /* Mailbox 19 High Acceptance Mask */ +#define CAN_AM20L 0xFFC02BA0 /* Mailbox 20 Low Acceptance Mask */ +#define CAN_AM20H 0xFFC02BA4 /* Mailbox 20 High Acceptance Mask */ +#define CAN_AM21L 0xFFC02BA8 /* Mailbox 21 Low Acceptance Mask */ +#define CAN_AM21H 0xFFC02BAC /* Mailbox 21 High Acceptance Mask */ +#define CAN_AM22L 0xFFC02BB0 /* Mailbox 22 Low Acceptance Mask */ +#define CAN_AM22H 0xFFC02BB4 /* Mailbox 22 High Acceptance Mask */ +#define CAN_AM23L 0xFFC02BB8 /* Mailbox 23 Low Acceptance Mask */ +#define CAN_AM23H 0xFFC02BBC /* Mailbox 23 High Acceptance Mask */ +#define CAN_AM24L 0xFFC02BC0 /* Mailbox 24 Low Acceptance Mask */ +#define CAN_AM24H 0xFFC02BC4 /* Mailbox 24 High Acceptance Mask */ +#define CAN_AM25L 0xFFC02BC8 /* Mailbox 25 Low Acceptance Mask */ +#define CAN_AM25H 0xFFC02BCC /* Mailbox 25 High Acceptance Mask */ +#define CAN_AM26L 0xFFC02BD0 /* Mailbox 26 Low Acceptance Mask */ +#define CAN_AM26H 0xFFC02BD4 /* Mailbox 26 High Acceptance Mask */ +#define CAN_AM27L 0xFFC02BD8 /* Mailbox 27 Low Acceptance Mask */ +#define CAN_AM27H 0xFFC02BDC /* Mailbox 27 High Acceptance Mask */ +#define CAN_AM28L 0xFFC02BE0 /* Mailbox 28 Low Acceptance Mask */ +#define CAN_AM28H 0xFFC02BE4 /* Mailbox 28 High Acceptance Mask */ +#define CAN_AM29L 0xFFC02BE8 /* Mailbox 29 Low Acceptance Mask */ +#define CAN_AM29H 0xFFC02BEC /* Mailbox 29 High Acceptance Mask */ +#define CAN_AM30L 0xFFC02BF0 /* Mailbox 30 Low Acceptance Mask */ +#define CAN_AM30H 0xFFC02BF4 /* Mailbox 30 High Acceptance Mask */ +#define CAN_AM31L 0xFFC02BF8 /* Mailbox 31 Low Acceptance Mask */ +#define CAN_AM31H 0xFFC02BFC /* Mailbox 31 High Acceptance Mask */ +#define CAN_MB00_DATA0 0xFFC02C00 /* Mailbox 0 Data Word 0 [15:0] Register */ +#define CAN_MB00_DATA1 0xFFC02C04 /* Mailbox 0 Data Word 1 [31:16] Register */ +#define CAN_MB00_DATA2 0xFFC02C08 /* Mailbox 0 Data Word 2 [47:32] Register */ +#define CAN_MB00_DATA3 0xFFC02C0C /* Mailbox 0 Data Word 3 [63:48] Register */ +#define CAN_MB00_LENGTH 0xFFC02C10 /* Mailbox 0 Data Length Code Register */ +#define CAN_MB00_TIMESTAMP 0xFFC02C14 /* Mailbox 0 Time Stamp Value Register */ +#define CAN_MB00_ID0 0xFFC02C18 /* Mailbox 0 Identifier Low Register */ +#define CAN_MB00_ID1 0xFFC02C1C /* Mailbox 0 Identifier High Register */ +#define CAN_MB01_DATA0 0xFFC02C20 /* Mailbox 1 Data Word 0 [15:0] Register */ +#define CAN_MB01_DATA1 0xFFC02C24 /* Mailbox 1 Data Word 1 [31:16] Register */ +#define CAN_MB01_DATA2 0xFFC02C28 /* Mailbox 1 Data Word 2 [47:32] Register */ +#define CAN_MB01_DATA3 0xFFC02C2C /* Mailbox 1 Data Word 3 [63:48] Register */ +#define CAN_MB01_LENGTH 0xFFC02C30 /* Mailbox 1 Data Length Code Register */ +#define CAN_MB01_TIMESTAMP 0xFFC02C34 /* Mailbox 1 Time Stamp Value Register */ +#define CAN_MB01_ID0 0xFFC02C38 /* Mailbox 1 Identifier Low Register */ +#define CAN_MB01_ID1 0xFFC02C3C /* Mailbox 1 Identifier High Register */ +#define CAN_MB02_DATA0 0xFFC02C40 /* Mailbox 2 Data Word 0 [15:0] Register */ +#define CAN_MB02_DATA1 0xFFC02C44 /* Mailbox 2 Data Word 1 [31:16] Register */ +#define CAN_MB02_DATA2 0xFFC02C48 /* Mailbox 2 Data Word 2 [47:32] Register */ +#define CAN_MB02_DATA3 0xFFC02C4C /* Mailbox 2 Data Word 3 [63:48] Register */ +#define CAN_MB02_LENGTH 0xFFC02C50 /* Mailbox 2 Data Length Code Register */ +#define CAN_MB02_TIMESTAMP 0xFFC02C54 /* Mailbox 2 Time Stamp Value Register */ +#define CAN_MB02_ID0 0xFFC02C58 /* Mailbox 2 Identifier Low Register */ +#define CAN_MB02_ID1 0xFFC02C5C /* Mailbox 2 Identifier High Register */ +#define CAN_MB03_DATA0 0xFFC02C60 /* Mailbox 3 Data Word 0 [15:0] Register */ +#define CAN_MB03_DATA1 0xFFC02C64 /* Mailbox 3 Data Word 1 [31:16] Register */ +#define CAN_MB03_DATA2 0xFFC02C68 /* Mailbox 3 Data Word 2 [47:32] Register */ +#define CAN_MB03_DATA3 0xFFC02C6C /* Mailbox 3 Data Word 3 [63:48] Register */ +#define CAN_MB03_LENGTH 0xFFC02C70 /* Mailbox 3 Data Length Code Register */ +#define CAN_MB03_TIMESTAMP 0xFFC02C74 /* Mailbox 3 Time Stamp Value Register */ +#define CAN_MB03_ID0 0xFFC02C78 /* Mailbox 3 Identifier Low Register */ +#define CAN_MB03_ID1 0xFFC02C7C /* Mailbox 3 Identifier High Register */ +#define CAN_MB04_DATA0 0xFFC02C80 /* Mailbox 4 Data Word 0 [15:0] Register */ +#define CAN_MB04_DATA1 0xFFC02C84 /* Mailbox 4 Data Word 1 [31:16] Register */ +#define CAN_MB04_DATA2 0xFFC02C88 /* Mailbox 4 Data Word 2 [47:32] Register */ +#define CAN_MB04_DATA3 0xFFC02C8C /* Mailbox 4 Data Word 3 [63:48] Register */ +#define CAN_MB04_LENGTH 0xFFC02C90 /* Mailbox 4 Data Length Code Register */ +#define CAN_MB04_TIMESTAMP 0xFFC02C94 /* Mailbox 4 Time Stamp Value Register */ +#define CAN_MB04_ID0 0xFFC02C98 /* Mailbox 4 Identifier Low Register */ +#define CAN_MB04_ID1 0xFFC02C9C /* Mailbox 4 Identifier High Register */ +#define CAN_MB05_DATA0 0xFFC02CA0 /* Mailbox 5 Data Word 0 [15:0] Register */ +#define CAN_MB05_DATA1 0xFFC02CA4 /* Mailbox 5 Data Word 1 [31:16] Register */ +#define CAN_MB05_DATA2 0xFFC02CA8 /* Mailbox 5 Data Word 2 [47:32] Register */ +#define CAN_MB05_DATA3 0xFFC02CAC /* Mailbox 5 Data Word 3 [63:48] Register */ +#define CAN_MB05_LENGTH 0xFFC02CB0 /* Mailbox 5 Data Length Code Register */ +#define CAN_MB05_TIMESTAMP 0xFFC02CB4 /* Mailbox 5 Time Stamp Value Register */ +#define CAN_MB05_ID0 0xFFC02CB8 /* Mailbox 5 Identifier Low Register */ +#define CAN_MB05_ID1 0xFFC02CBC /* Mailbox 5 Identifier High Register */ +#define CAN_MB06_DATA0 0xFFC02CC0 /* Mailbox 6 Data Word 0 [15:0] Register */ +#define CAN_MB06_DATA1 0xFFC02CC4 /* Mailbox 6 Data Word 1 [31:16] Register */ +#define CAN_MB06_DATA2 0xFFC02CC8 /* Mailbox 6 Data Word 2 [47:32] Register */ +#define CAN_MB06_DATA3 0xFFC02CCC /* Mailbox 6 Data Word 3 [63:48] Register */ +#define CAN_MB06_LENGTH 0xFFC02CD0 /* Mailbox 6 Data Length Code Register */ +#define CAN_MB06_TIMESTAMP 0xFFC02CD4 /* Mailbox 6 Time Stamp Value Register */ +#define CAN_MB06_ID0 0xFFC02CD8 /* Mailbox 6 Identifier Low Register */ +#define CAN_MB06_ID1 0xFFC02CDC /* Mailbox 6 Identifier High Register */ +#define CAN_MB07_DATA0 0xFFC02CE0 /* Mailbox 7 Data Word 0 [15:0] Register */ +#define CAN_MB07_DATA1 0xFFC02CE4 /* Mailbox 7 Data Word 1 [31:16] Register */ +#define CAN_MB07_DATA2 0xFFC02CE8 /* Mailbox 7 Data Word 2 [47:32] Register */ +#define CAN_MB07_DATA3 0xFFC02CEC /* Mailbox 7 Data Word 3 [63:48] Register */ +#define CAN_MB07_LENGTH 0xFFC02CF0 /* Mailbox 7 Data Length Code Register */ +#define CAN_MB07_TIMESTAMP 0xFFC02CF4 /* Mailbox 7 Time Stamp Value Register */ +#define CAN_MB07_ID0 0xFFC02CF8 /* Mailbox 7 Identifier Low Register */ +#define CAN_MB07_ID1 0xFFC02CFC /* Mailbox 7 Identifier High Register */ +#define CAN_MB08_DATA0 0xFFC02D00 /* Mailbox 8 Data Word 0 [15:0] Register */ +#define CAN_MB08_DATA1 0xFFC02D04 /* Mailbox 8 Data Word 1 [31:16] Register */ +#define CAN_MB08_DATA2 0xFFC02D08 /* Mailbox 8 Data Word 2 [47:32] Register */ +#define CAN_MB08_DATA3 0xFFC02D0C /* Mailbox 8 Data Word 3 [63:48] Register */ +#define CAN_MB08_LENGTH 0xFFC02D10 /* Mailbox 8 Data Length Code Register */ +#define CAN_MB08_TIMESTAMP 0xFFC02D14 /* Mailbox 8 Time Stamp Value Register */ +#define CAN_MB08_ID0 0xFFC02D18 /* Mailbox 8 Identifier Low Register */ +#define CAN_MB08_ID1 0xFFC02D1C /* Mailbox 8 Identifier High Register */ +#define CAN_MB09_DATA0 0xFFC02D20 /* Mailbox 9 Data Word 0 [15:0] Register */ +#define CAN_MB09_DATA1 0xFFC02D24 /* Mailbox 9 Data Word 1 [31:16] Register */ +#define CAN_MB09_DATA2 0xFFC02D28 /* Mailbox 9 Data Word 2 [47:32] Register */ +#define CAN_MB09_DATA3 0xFFC02D2C /* Mailbox 9 Data Word 3 [63:48] Register */ +#define CAN_MB09_LENGTH 0xFFC02D30 /* Mailbox 9 Data Length Code Register */ +#define CAN_MB09_TIMESTAMP 0xFFC02D34 /* Mailbox 9 Time Stamp Value Register */ +#define CAN_MB09_ID0 0xFFC02D38 /* Mailbox 9 Identifier Low Register */ +#define CAN_MB09_ID1 0xFFC02D3C /* Mailbox 9 Identifier High Register */ +#define CAN_MB10_DATA0 0xFFC02D40 /* Mailbox 10 Data Word 0 [15:0] Register */ +#define CAN_MB10_DATA1 0xFFC02D44 /* Mailbox 10 Data Word 1 [31:16] Register */ +#define CAN_MB10_DATA2 0xFFC02D48 /* Mailbox 10 Data Word 2 [47:32] Register */ +#define CAN_MB10_DATA3 0xFFC02D4C /* Mailbox 10 Data Word 3 [63:48] Register */ +#define CAN_MB10_LENGTH 0xFFC02D50 /* Mailbox 10 Data Length Code Register */ +#define CAN_MB10_TIMESTAMP 0xFFC02D54 /* Mailbox 10 Time Stamp Value Register */ +#define CAN_MB10_ID0 0xFFC02D58 /* Mailbox 10 Identifier Low Register */ +#define CAN_MB10_ID1 0xFFC02D5C /* Mailbox 10 Identifier High Register */ +#define CAN_MB11_DATA0 0xFFC02D60 /* Mailbox 11 Data Word 0 [15:0] Register */ +#define CAN_MB11_DATA1 0xFFC02D64 /* Mailbox 11 Data Word 1 [31:16] Register */ +#define CAN_MB11_DATA2 0xFFC02D68 /* Mailbox 11 Data Word 2 [47:32] Register */ +#define CAN_MB11_DATA3 0xFFC02D6C /* Mailbox 11 Data Word 3 [63:48] Register */ +#define CAN_MB11_LENGTH 0xFFC02D70 /* Mailbox 11 Data Length Code Register */ +#define CAN_MB11_TIMESTAMP 0xFFC02D74 /* Mailbox 11 Time Stamp Value Register */ +#define CAN_MB11_ID0 0xFFC02D78 /* Mailbox 11 Identifier Low Register */ +#define CAN_MB11_ID1 0xFFC02D7C /* Mailbox 11 Identifier High Register */ +#define CAN_MB12_DATA0 0xFFC02D80 /* Mailbox 12 Data Word 0 [15:0] Register */ +#define CAN_MB12_DATA1 0xFFC02D84 /* Mailbox 12 Data Word 1 [31:16] Register */ +#define CAN_MB12_DATA2 0xFFC02D88 /* Mailbox 12 Data Word 2 [47:32] Register */ +#define CAN_MB12_DATA3 0xFFC02D8C /* Mailbox 12 Data Word 3 [63:48] Register */ +#define CAN_MB12_LENGTH 0xFFC02D90 /* Mailbox 12 Data Length Code Register */ +#define CAN_MB12_TIMESTAMP 0xFFC02D94 /* Mailbox 12 Time Stamp Value Register */ +#define CAN_MB12_ID0 0xFFC02D98 /* Mailbox 12 Identifier Low Register */ +#define CAN_MB12_ID1 0xFFC02D9C /* Mailbox 12 Identifier High Register */ +#define CAN_MB13_DATA0 0xFFC02DA0 /* Mailbox 13 Data Word 0 [15:0] Register */ +#define CAN_MB13_DATA1 0xFFC02DA4 /* Mailbox 13 Data Word 1 [31:16] Register */ +#define CAN_MB13_DATA2 0xFFC02DA8 /* Mailbox 13 Data Word 2 [47:32] Register */ +#define CAN_MB13_DATA3 0xFFC02DAC /* Mailbox 13 Data Word 3 [63:48] Register */ +#define CAN_MB13_LENGTH 0xFFC02DB0 /* Mailbox 13 Data Length Code Register */ +#define CAN_MB13_TIMESTAMP 0xFFC02DB4 /* Mailbox 13 Time Stamp Value Register */ +#define CAN_MB13_ID0 0xFFC02DB8 /* Mailbox 13 Identifier Low Register */ +#define CAN_MB13_ID1 0xFFC02DBC /* Mailbox 13 Identifier High Register */ +#define CAN_MB14_DATA0 0xFFC02DC0 /* Mailbox 14 Data Word 0 [15:0] Register */ +#define CAN_MB14_DATA1 0xFFC02DC4 /* Mailbox 14 Data Word 1 [31:16] Register */ +#define CAN_MB14_DATA2 0xFFC02DC8 /* Mailbox 14 Data Word 2 [47:32] Register */ +#define CAN_MB14_DATA3 0xFFC02DCC /* Mailbox 14 Data Word 3 [63:48] Register */ +#define CAN_MB14_LENGTH 0xFFC02DD0 /* Mailbox 14 Data Length Code Register */ +#define CAN_MB14_TIMESTAMP 0xFFC02DD4 /* Mailbox 14 Time Stamp Value Register */ +#define CAN_MB14_ID0 0xFFC02DD8 /* Mailbox 14 Identifier Low Register */ +#define CAN_MB14_ID1 0xFFC02DDC /* Mailbox 14 Identifier High Register */ +#define CAN_MB15_DATA0 0xFFC02DE0 /* Mailbox 15 Data Word 0 [15:0] Register */ +#define CAN_MB15_DATA1 0xFFC02DE4 /* Mailbox 15 Data Word 1 [31:16] Register */ +#define CAN_MB15_DATA2 0xFFC02DE8 /* Mailbox 15 Data Word 2 [47:32] Register */ +#define CAN_MB15_DATA3 0xFFC02DEC /* Mailbox 15 Data Word 3 [63:48] Register */ +#define CAN_MB15_LENGTH 0xFFC02DF0 /* Mailbox 15 Data Length Code Register */ +#define CAN_MB15_TIMESTAMP 0xFFC02DF4 /* Mailbox 15 Time Stamp Value Register */ +#define CAN_MB15_ID0 0xFFC02DF8 /* Mailbox 15 Identifier Low Register */ +#define CAN_MB15_ID1 0xFFC02DFC /* Mailbox 15 Identifier High Register */ +#define CAN_MB16_DATA0 0xFFC02E00 /* Mailbox 16 Data Word 0 [15:0] Register */ +#define CAN_MB16_DATA1 0xFFC02E04 /* Mailbox 16 Data Word 1 [31:16] Register */ +#define CAN_MB16_DATA2 0xFFC02E08 /* Mailbox 16 Data Word 2 [47:32] Register */ +#define CAN_MB16_DATA3 0xFFC02E0C /* Mailbox 16 Data Word 3 [63:48] Register */ +#define CAN_MB16_LENGTH 0xFFC02E10 /* Mailbox 16 Data Length Code Register */ +#define CAN_MB16_TIMESTAMP 0xFFC02E14 /* Mailbox 16 Time Stamp Value Register */ +#define CAN_MB16_ID0 0xFFC02E18 /* Mailbox 16 Identifier Low Register */ +#define CAN_MB16_ID1 0xFFC02E1C /* Mailbox 16 Identifier High Register */ +#define CAN_MB17_DATA0 0xFFC02E20 /* Mailbox 17 Data Word 0 [15:0] Register */ +#define CAN_MB17_DATA1 0xFFC02E24 /* Mailbox 17 Data Word 1 [31:16] Register */ +#define CAN_MB17_DATA2 0xFFC02E28 /* Mailbox 17 Data Word 2 [47:32] Register */ +#define CAN_MB17_DATA3 0xFFC02E2C /* Mailbox 17 Data Word 3 [63:48] Register */ +#define CAN_MB17_LENGTH 0xFFC02E30 /* Mailbox 17 Data Length Code Register */ +#define CAN_MB17_TIMESTAMP 0xFFC02E34 /* Mailbox 17 Time Stamp Value Register */ +#define CAN_MB17_ID0 0xFFC02E38 /* Mailbox 17 Identifier Low Register */ +#define CAN_MB17_ID1 0xFFC02E3C /* Mailbox 17 Identifier High Register */ +#define CAN_MB18_DATA0 0xFFC02E40 /* Mailbox 18 Data Word 0 [15:0] Register */ +#define CAN_MB18_DATA1 0xFFC02E44 /* Mailbox 18 Data Word 1 [31:16] Register */ +#define CAN_MB18_DATA2 0xFFC02E48 /* Mailbox 18 Data Word 2 [47:32] Register */ +#define CAN_MB18_DATA3 0xFFC02E4C /* Mailbox 18 Data Word 3 [63:48] Register */ +#define CAN_MB18_LENGTH 0xFFC02E50 /* Mailbox 18 Data Length Code Register */ +#define CAN_MB18_TIMESTAMP 0xFFC02E54 /* Mailbox 18 Time Stamp Value Register */ +#define CAN_MB18_ID0 0xFFC02E58 /* Mailbox 18 Identifier Low Register */ +#define CAN_MB18_ID1 0xFFC02E5C /* Mailbox 18 Identifier High Register */ +#define CAN_MB19_DATA0 0xFFC02E60 /* Mailbox 19 Data Word 0 [15:0] Register */ +#define CAN_MB19_DATA1 0xFFC02E64 /* Mailbox 19 Data Word 1 [31:16] Register */ +#define CAN_MB19_DATA2 0xFFC02E68 /* Mailbox 19 Data Word 2 [47:32] Register */ +#define CAN_MB19_DATA3 0xFFC02E6C /* Mailbox 19 Data Word 3 [63:48] Register */ +#define CAN_MB19_LENGTH 0xFFC02E70 /* Mailbox 19 Data Length Code Register */ +#define CAN_MB19_TIMESTAMP 0xFFC02E74 /* Mailbox 19 Time Stamp Value Register */ +#define CAN_MB19_ID0 0xFFC02E78 /* Mailbox 19 Identifier Low Register */ +#define CAN_MB19_ID1 0xFFC02E7C /* Mailbox 19 Identifier High Register */ +#define CAN_MB20_DATA0 0xFFC02E80 /* Mailbox 20 Data Word 0 [15:0] Register */ +#define CAN_MB20_DATA1 0xFFC02E84 /* Mailbox 20 Data Word 1 [31:16] Register */ +#define CAN_MB20_DATA2 0xFFC02E88 /* Mailbox 20 Data Word 2 [47:32] Register */ +#define CAN_MB20_DATA3 0xFFC02E8C /* Mailbox 20 Data Word 3 [63:48] Register */ +#define CAN_MB20_LENGTH 0xFFC02E90 /* Mailbox 20 Data Length Code Register */ +#define CAN_MB20_TIMESTAMP 0xFFC02E94 /* Mailbox 20 Time Stamp Value Register */ +#define CAN_MB20_ID0 0xFFC02E98 /* Mailbox 20 Identifier Low Register */ +#define CAN_MB20_ID1 0xFFC02E9C /* Mailbox 20 Identifier High Register */ +#define CAN_MB21_DATA0 0xFFC02EA0 /* Mailbox 21 Data Word 0 [15:0] Register */ +#define CAN_MB21_DATA1 0xFFC02EA4 /* Mailbox 21 Data Word 1 [31:16] Register */ +#define CAN_MB21_DATA2 0xFFC02EA8 /* Mailbox 21 Data Word 2 [47:32] Register */ +#define CAN_MB21_DATA3 0xFFC02EAC /* Mailbox 21 Data Word 3 [63:48] Register */ +#define CAN_MB21_LENGTH 0xFFC02EB0 /* Mailbox 21 Data Length Code Register */ +#define CAN_MB21_TIMESTAMP 0xFFC02EB4 /* Mailbox 21 Time Stamp Value Register */ +#define CAN_MB21_ID0 0xFFC02EB8 /* Mailbox 21 Identifier Low Register */ +#define CAN_MB21_ID1 0xFFC02EBC /* Mailbox 21 Identifier High Register */ +#define CAN_MB22_DATA0 0xFFC02EC0 /* Mailbox 22 Data Word 0 [15:0] Register */ +#define CAN_MB22_DATA1 0xFFC02EC4 /* Mailbox 22 Data Word 1 [31:16] Register */ +#define CAN_MB22_DATA2 0xFFC02EC8 /* Mailbox 22 Data Word 2 [47:32] Register */ +#define CAN_MB22_DATA3 0xFFC02ECC /* Mailbox 22 Data Word 3 [63:48] Register */ +#define CAN_MB22_LENGTH 0xFFC02ED0 /* Mailbox 22 Data Length Code Register */ +#define CAN_MB22_TIMESTAMP 0xFFC02ED4 /* Mailbox 22 Time Stamp Value Register */ +#define CAN_MB22_ID0 0xFFC02ED8 /* Mailbox 22 Identifier Low Register */ +#define CAN_MB22_ID1 0xFFC02EDC /* Mailbox 22 Identifier High Register */ +#define CAN_MB23_DATA0 0xFFC02EE0 /* Mailbox 23 Data Word 0 [15:0] Register */ +#define CAN_MB23_DATA1 0xFFC02EE4 /* Mailbox 23 Data Word 1 [31:16] Register */ +#define CAN_MB23_DATA2 0xFFC02EE8 /* Mailbox 23 Data Word 2 [47:32] Register */ +#define CAN_MB23_DATA3 0xFFC02EEC /* Mailbox 23 Data Word 3 [63:48] Register */ +#define CAN_MB23_LENGTH 0xFFC02EF0 /* Mailbox 23 Data Length Code Register */ +#define CAN_MB23_TIMESTAMP 0xFFC02EF4 /* Mailbox 23 Time Stamp Value Register */ +#define CAN_MB23_ID0 0xFFC02EF8 /* Mailbox 23 Identifier Low Register */ +#define CAN_MB23_ID1 0xFFC02EFC /* Mailbox 23 Identifier High Register */ +#define CAN_MB24_DATA0 0xFFC02F00 /* Mailbox 24 Data Word 0 [15:0] Register */ +#define CAN_MB24_DATA1 0xFFC02F04 /* Mailbox 24 Data Word 1 [31:16] Register */ +#define CAN_MB24_DATA2 0xFFC02F08 /* Mailbox 24 Data Word 2 [47:32] Register */ +#define CAN_MB24_DATA3 0xFFC02F0C /* Mailbox 24 Data Word 3 [63:48] Register */ +#define CAN_MB24_LENGTH 0xFFC02F10 /* Mailbox 24 Data Length Code Register */ +#define CAN_MB24_TIMESTAMP 0xFFC02F14 /* Mailbox 24 Time Stamp Value Register */ +#define CAN_MB24_ID0 0xFFC02F18 /* Mailbox 24 Identifier Low Register */ +#define CAN_MB24_ID1 0xFFC02F1C /* Mailbox 24 Identifier High Register */ +#define CAN_MB25_DATA0 0xFFC02F20 /* Mailbox 25 Data Word 0 [15:0] Register */ +#define CAN_MB25_DATA1 0xFFC02F24 /* Mailbox 25 Data Word 1 [31:16] Register */ +#define CAN_MB25_DATA2 0xFFC02F28 /* Mailbox 25 Data Word 2 [47:32] Register */ +#define CAN_MB25_DATA3 0xFFC02F2C /* Mailbox 25 Data Word 3 [63:48] Register */ +#define CAN_MB25_LENGTH 0xFFC02F30 /* Mailbox 25 Data Length Code Register */ +#define CAN_MB25_TIMESTAMP 0xFFC02F34 /* Mailbox 25 Time Stamp Value Register */ +#define CAN_MB25_ID0 0xFFC02F38 /* Mailbox 25 Identifier Low Register */ +#define CAN_MB25_ID1 0xFFC02F3C /* Mailbox 25 Identifier High Register */ +#define CAN_MB26_DATA0 0xFFC02F40 /* Mailbox 26 Data Word 0 [15:0] Register */ +#define CAN_MB26_DATA1 0xFFC02F44 /* Mailbox 26 Data Word 1 [31:16] Register */ +#define CAN_MB26_DATA2 0xFFC02F48 /* Mailbox 26 Data Word 2 [47:32] Register */ +#define CAN_MB26_DATA3 0xFFC02F4C /* Mailbox 26 Data Word 3 [63:48] Register */ +#define CAN_MB26_LENGTH 0xFFC02F50 /* Mailbox 26 Data Length Code Register */ +#define CAN_MB26_TIMESTAMP 0xFFC02F54 /* Mailbox 26 Time Stamp Value Register */ +#define CAN_MB26_ID0 0xFFC02F58 /* Mailbox 26 Identifier Low Register */ +#define CAN_MB26_ID1 0xFFC02F5C /* Mailbox 26 Identifier High Register */ +#define CAN_MB27_DATA0 0xFFC02F60 /* Mailbox 27 Data Word 0 [15:0] Register */ +#define CAN_MB27_DATA1 0xFFC02F64 /* Mailbox 27 Data Word 1 [31:16] Register */ +#define CAN_MB27_DATA2 0xFFC02F68 /* Mailbox 27 Data Word 2 [47:32] Register */ +#define CAN_MB27_DATA3 0xFFC02F6C /* Mailbox 27 Data Word 3 [63:48] Register */ +#define CAN_MB27_LENGTH 0xFFC02F70 /* Mailbox 27 Data Length Code Register */ +#define CAN_MB27_TIMESTAMP 0xFFC02F74 /* Mailbox 27 Time Stamp Value Register */ +#define CAN_MB27_ID0 0xFFC02F78 /* Mailbox 27 Identifier Low Register */ +#define CAN_MB27_ID1 0xFFC02F7C /* Mailbox 27 Identifier High Register */ +#define CAN_MB28_DATA0 0xFFC02F80 /* Mailbox 28 Data Word 0 [15:0] Register */ +#define CAN_MB28_DATA1 0xFFC02F84 /* Mailbox 28 Data Word 1 [31:16] Register */ +#define CAN_MB28_DATA2 0xFFC02F88 /* Mailbox 28 Data Word 2 [47:32] Register */ +#define CAN_MB28_DATA3 0xFFC02F8C /* Mailbox 28 Data Word 3 [63:48] Register */ +#define CAN_MB28_LENGTH 0xFFC02F90 /* Mailbox 28 Data Length Code Register */ +#define CAN_MB28_TIMESTAMP 0xFFC02F94 /* Mailbox 28 Time Stamp Value Register */ +#define CAN_MB28_ID0 0xFFC02F98 /* Mailbox 28 Identifier Low Register */ +#define CAN_MB28_ID1 0xFFC02F9C /* Mailbox 28 Identifier High Register */ +#define CAN_MB29_DATA0 0xFFC02FA0 /* Mailbox 29 Data Word 0 [15:0] Register */ +#define CAN_MB29_DATA1 0xFFC02FA4 /* Mailbox 29 Data Word 1 [31:16] Register */ +#define CAN_MB29_DATA2 0xFFC02FA8 /* Mailbox 29 Data Word 2 [47:32] Register */ +#define CAN_MB29_DATA3 0xFFC02FAC /* Mailbox 29 Data Word 3 [63:48] Register */ +#define CAN_MB29_LENGTH 0xFFC02FB0 /* Mailbox 29 Data Length Code Register */ +#define CAN_MB29_TIMESTAMP 0xFFC02FB4 /* Mailbox 29 Time Stamp Value Register */ +#define CAN_MB29_ID0 0xFFC02FB8 /* Mailbox 29 Identifier Low Register */ +#define CAN_MB29_ID1 0xFFC02FBC /* Mailbox 29 Identifier High Register */ +#define CAN_MB30_DATA0 0xFFC02FC0 /* Mailbox 30 Data Word 0 [15:0] Register */ +#define CAN_MB30_DATA1 0xFFC02FC4 /* Mailbox 30 Data Word 1 [31:16] Register */ +#define CAN_MB30_DATA2 0xFFC02FC8 /* Mailbox 30 Data Word 2 [47:32] Register */ +#define CAN_MB30_DATA3 0xFFC02FCC /* Mailbox 30 Data Word 3 [63:48] Register */ +#define CAN_MB30_LENGTH 0xFFC02FD0 /* Mailbox 30 Data Length Code Register */ +#define CAN_MB30_TIMESTAMP 0xFFC02FD4 /* Mailbox 30 Time Stamp Value Register */ +#define CAN_MB30_ID0 0xFFC02FD8 /* Mailbox 30 Identifier Low Register */ +#define CAN_MB30_ID1 0xFFC02FDC /* Mailbox 30 Identifier High Register */ +#define CAN_MB31_DATA0 0xFFC02FE0 /* Mailbox 31 Data Word 0 [15:0] Register */ +#define CAN_MB31_DATA1 0xFFC02FE4 /* Mailbox 31 Data Word 1 [31:16] Register */ +#define CAN_MB31_DATA2 0xFFC02FE8 /* Mailbox 31 Data Word 2 [47:32] Register */ +#define CAN_MB31_DATA3 0xFFC02FEC /* Mailbox 31 Data Word 3 [63:48] Register */ +#define CAN_MB31_LENGTH 0xFFC02FF0 /* Mailbox 31 Data Length Code Register */ +#define CAN_MB31_TIMESTAMP 0xFFC02FF4 /* Mailbox 31 Time Stamp Value Register */ +#define CAN_MB31_ID0 0xFFC02FF8 /* Mailbox 31 Identifier Low Register */ +#define CAN_MB31_ID1 0xFFC02FFC /* Mailbox 31 Identifier High Register */ +#define PORTF_FER 0xFFC03200 /* Port F Function Enable Register (Alternate/Flag*) */ +#define PORTG_FER 0xFFC03204 /* Port G Function Enable Register (Alternate/Flag*) */ +#define PORTH_FER 0xFFC03208 /* Port H Function Enable Register (Alternate/Flag*) */ +#define PORT_MUX 0xFFC0320C /* Port Multiplexer Control Register */ +#define HMDMA0_CONTROL 0xFFC03300 /* Handshake MDMA0 Control Register */ +#define HMDMA0_ECINIT 0xFFC03304 /* HMDMA0 Initial Edge Count Register */ +#define HMDMA0_BCINIT 0xFFC03308 /* HMDMA0 Initial Block Count Register */ +#define HMDMA0_ECURGENT 0xFFC0330C /* HMDMA0 Urgent Edge Count Threshhold Register */ +#define HMDMA0_ECOVERFLOW 0xFFC03310 /* HMDMA0 Edge Count Overflow Interrupt Register */ +#define HMDMA0_ECOUNT 0xFFC03314 /* HMDMA0 Current Edge Count Register */ +#define HMDMA0_BCOUNT 0xFFC03318 /* HMDMA0 Current Block Count Register */ +#define HMDMA1_CONTROL 0xFFC03340 /* Handshake MDMA1 Control Register */ +#define HMDMA1_ECINIT 0xFFC03344 /* HMDMA1 Initial Edge Count Register */ +#define HMDMA1_BCINIT 0xFFC03348 /* HMDMA1 Initial Block Count Register */ +#define HMDMA1_ECURGENT 0xFFC0334C /* HMDMA1 Urgent Edge Count Threshhold Register */ +#define HMDMA1_ECOVERFLOW 0xFFC03350 /* HMDMA1 Edge Count Overflow Interrupt Register */ +#define HMDMA1_ECOUNT 0xFFC03354 /* HMDMA1 Current Edge Count Register */ +#define HMDMA1_BCOUNT 0xFFC03358 /* HMDMA1 Current Block Count Register */ +#define CHIPID 0xFFC00014 +#define DMA_TC_CNT 0xFFC00B0C +#define DMA_TC_PER 0xFFC00B10 -#if defined(__BFIN_DEF_ADSP_BF537_proc__) || !defined(__BFIN_DEF_ADSP_BF536_proc__) +#if !defined(__ADSPBF536__) #define L1_DATA_A_SRAM 0xFF800000 /* 0xFF800000 -> 0xFF803FFF Data Bank A SRAM */ #define L1_DATA_A_SRAM_SIZE (0xFF803FFF - 0xFF800000 + 1) #define L1_DATA_A_SRAM_END (L1_DATA_A_SRAM + L1_DATA_A_SRAM_SIZE) @@ -21,11 +827,5 @@ #define L1_INST_SRAM 0xFFA00000 /* 0xFFA00000 -> 0xFFA07FFF Instruction Bank A SRAM */ #define L1_INST_SRAM_SIZE (0xFFA07FFF - 0xFFA00000 + 1) #define L1_INST_SRAM_END (L1_INST_SRAM + L1_INST_SRAM_SIZE) -#define L1_SRAM_SCRATCH 0xFFB00000 /* 0xFFB00000 -> 0xFFB00FFF Scratchpad SRAM */ -#define L1_SRAM_SCRATCH_SIZE (0xFFB00FFF - 0xFFB00000 + 1) -#define L1_SRAM_SCRATCH_END (L1_SRAM_SCRATCH + L1_SRAM_SCRATCH_SIZE) -#define SYSMMR_BASE 0xFFC00000 /* 0xFFC00000 -> 0xFFFFFFFF MMR registers */ -#define SYSMMR_BASE_SIZE (0xFFFFFFFF - 0xFFC00000 + 1) -#define SYSMMR_BASE_END (SYSMMR_BASE + SYSMMR_BASE_SIZE) #endif /* __BFIN_DEF_ADSP_BF534_proc__ */ diff --git a/arch/blackfin/include/asm/mach-bf538/BF538_def.h b/arch/blackfin/include/asm/mach-bf538/BF538_def.h index eae8e81..1736dab 100644 --- a/arch/blackfin/include/asm/mach-bf538/BF538_def.h +++ b/arch/blackfin/include/asm/mach-bf538/BF538_def.h @@ -1021,11 +1021,5 @@ #define L1_INST_SRAM 0xFFA00000 /* 0xFFA00000 -> 0xFFA07FFF Instruction Bank A SRAM */ #define L1_INST_SRAM_SIZE (0xFFA07FFF - 0xFFA00000 + 1) #define L1_INST_SRAM_END (L1_INST_SRAM + L1_INST_SRAM_SIZE) -#define L1_SRAM_SCRATCH 0xFFB00000 /* 0xFFB00000 -> 0xFFB00FFF Scratchpad SRAM */ -#define L1_SRAM_SCRATCH_SIZE (0xFFB00FFF - 0xFFB00000 + 1) -#define L1_SRAM_SCRATCH_END (L1_SRAM_SCRATCH + L1_SRAM_SCRATCH_SIZE) -#define SYSMMR_BASE 0xFFC00000 /* 0xFFC00000 -> 0xFFFFFFFF MMR registers */ -#define SYSMMR_BASE_SIZE (0xFFFFFFFF - 0xFFC00000 + 1) -#define SYSMMR_BASE_END (SYSMMR_BASE + SYSMMR_BASE_SIZE) #endif /* __BFIN_DEF_ADSP_BF538_proc__ */ diff --git a/arch/blackfin/include/asm/mach-bf561/BF561_def.h b/arch/blackfin/include/asm/mach-bf561/BF561_def.h index 1aae565..46925f8 100644 --- a/arch/blackfin/include/asm/mach-bf561/BF561_def.h +++ b/arch/blackfin/include/asm/mach-bf561/BF561_def.h @@ -708,14 +708,9 @@ #define EBIU_SDBCTL 0xFFC00A14 #define EBIU_SDRRC 0xFFC00A18 #define EBIU_SDSTAT 0xFFC00A1C + #define L1_INST_SRAM 0xFFA00000 /* 0xFFA00000 -> 0xFFA03FFF Instruction Bank A SRAM */ #define L1_INST_SRAM_SIZE (0xFFA03FFF - 0xFFA00000 + 1) #define L1_INST_SRAM_END (L1_INST_SRAM + L1_INST_SRAM_SIZE) -#define L1_SRAM_SCRATCH 0xFFB00000 /* 0xFFB00000 -> 0xFFB00FFF Scratchpad SRAM */ -#define L1_SRAM_SCRATCH_SIZE (0xFFB00FFF - 0xFFB00000 + 1) -#define L1_SRAM_SCRATCH_END (L1_SRAM_SCRATCH + L1_SRAM_SCRATCH_SIZE) -#define SYSMMR_BASE 0xFFC00000 /* 0xFFC00000 -> 0xFFFFFFFF MMR registers */ -#define SYSMMR_BASE_SIZE (0xFFFFFFFF - 0xFFC00000 + 1) -#define SYSMMR_BASE_END (SYSMMR_BASE + SYSMMR_BASE_SIZE) #endif /* __BFIN_DEF_ADSP_BF561_proc__ */ diff --git a/arch/blackfin/include/asm/mach-common/bits/bootrom.h b/arch/blackfin/include/asm/mach-common/bits/bootrom.h index f537e93..0e2cacb 100644 --- a/arch/blackfin/include/asm/mach-common/bits/bootrom.h +++ b/arch/blackfin/include/asm/mach-common/bits/bootrom.h @@ -229,33 +229,65 @@ static uint32_t (* const bfrom_NandBoot)(int32_t dNandAddress, int32_t dFlags, i #endif /* __ASSEMBLY__ */ +/* Bit defines for BF53x block flags */ +#define BFLAG_53X_ZEROFILL 0x0001 +#define BFLAG_53X_RESVECT 0x0002 +#define BFLAG_53X_INIT 0x0008 +#define BFLAG_53X_IGNORE 0x0010 +#define BFLAG_53X_PFLAG_MASK 0x01E0 +#define BFLAG_53X_PFLAG_SHIFT 5 +#define BFLAG_53X_PPORT_MASK 0x0600 +#define BFLAG_53X_PPORT_SHIFT 9 +#define BFLAG_53X_COMPRESSED 0x2000 +#define BFLAG_53X_FINAL 0x8000 + +/* Bit defines for BF56x global header */ +#define GFLAG_56X_16BIT_FLASH 0x00000001 +#define GFLAG_56X_WAIT_MASK 0x0000001E +#define GFLAG_56X_WAIT_SHIFT 1 +#define GFLAG_56X_HOLD_MASK 0x000000C0 +#define GFLAG_56X_HOLD_SHIFT 6 +#define GFLAG_56X_SPI_MASK 0x00000700 +#define GFLAG_56X_SPI_SHIFT 8 +#define GFLAG_56X_SPI_500K 0x0 +#define GFLAG_56X_SPI_1M 0x1 +#define GFLAG_56X_SPI_2M 0x2 +#define GFLAG_56X_SIGN_MASK 0xFF000000 +#define GFLAG_56X_SIGN_SHIFT 28 +#define GFLAG_56X_SIGN_MAGIC 0xA + /* Bit defines for ADI_BOOT_DATA->dFlags */ -#define BFLAG_DMACODE_MASK 0x0000000F -#define BFLAG_SAFE 0x00000010 -#define BFLAG_AUX 0x00000020 -#define BFLAG_FILL 0x00000100 -#define BFLAG_QUICKBOOT 0x00000200 -#define BFLAG_CALLBACK 0x00000400 -#define BFLAG_INIT 0x00000800 -#define BFLAG_IGNORE 0x00001000 -#define BFLAG_INDIRECT 0x00002000 -#define BFLAG_FIRST 0x00004000 -#define BFLAG_FINAL 0x00008000 -#define BFLAG_HOOK 0x00400000 -#define BFLAG_HDRINDIRECT 0x00800000 -#define BFLAG_TYPE_MASK 0x00300000 -#define BFLAG_TYPE_1 0x00000000 -#define BFLAG_TYPE_2 0x00100000 -#define BFLAG_TYPE_3 0x00200000 -#define BFLAG_TYPE_4 0x00300000 -#define BFLAG_FASTREAD 0x00400000 -#define BFLAG_NOAUTO 0x01000000 -#define BFLAG_PERIPHERAL 0x02000000 -#define BFLAG_SLAVE 0x04000000 -#define BFLAG_WAKEUP 0x08000000 -#define BFLAG_NEXTDXE 0x10000000 -#define BFLAG_RETURN 0x20000000 -#define BFLAG_RESET 0x40000000 -#define BFLAG_NONRESTORE 0x80000000 +#define BFLAG_DMACODE_MASK 0x0000000F +#define BFLAG_SAFE 0x00000010 +#define BFLAG_AUX 0x00000020 +#define BFLAG_FILL 0x00000100 +#define BFLAG_QUICKBOOT 0x00000200 +#define BFLAG_CALLBACK 0x00000400 +#define BFLAG_INIT 0x00000800 +#define BFLAG_IGNORE 0x00001000 +#define BFLAG_INDIRECT 0x00002000 +#define BFLAG_FIRST 0x00004000 +#define BFLAG_FINAL 0x00008000 +#define BFLAG_HDRSIGN_MASK 0xFF000000 +#define BFLAG_HDRSIGN_SHIFT 24 +#define BFLAG_HDRSIGN_MAGIC 0xAD +#define BFLAG_HDRCHK_MASK 0x00FF0000 +#define BFLAG_HDRCHK_SHIFT 16 +#define BFLAG_HOOK 0x00400000 +#define BFLAG_HDRINDIRECT 0x00800000 +#define BFLAG_TYPE_MASK 0x00300000 +#define BFLAG_TYPE_1 0x00000000 +#define BFLAG_TYPE_2 0x00100000 +#define BFLAG_TYPE_3 0x00200000 +#define BFLAG_TYPE_4 0x00300000 +#define BFLAG_FASTREAD 0x00400000 +#define BFLAG_NOAUTO 0x01000000 +#define BFLAG_PERIPHERAL 0x02000000 +#define BFLAG_SLAVE 0x04000000 +#define BFLAG_WAKEUP 0x08000000 +#define BFLAG_NEXTDXE 0x10000000 +#define BFLAG_RETURN 0x20000000 +#define BFLAG_RESET 0x40000000 +#define BFLAG_NONRESTORE 0x80000000 #endif diff --git a/arch/blackfin/lib/board.c b/arch/blackfin/lib/board.c index 8eca7d6..362b8c4 100644 --- a/arch/blackfin/lib/board.c +++ b/arch/blackfin/lib/board.c @@ -207,7 +207,6 @@ extern int timer_init(void); void board_init_f(ulong bootflag) { - ulong addr; bd_t *bd; char buf[32]; @@ -244,17 +243,12 @@ void board_init_f(ulong bootflag) gd = (gd_t *) (CONFIG_SYS_GBL_DATA_ADDR); memset((void *)gd, 0, GENERATED_GBL_DATA_SIZE); - /* Board data initialization */ - addr = (CONFIG_SYS_GBL_DATA_ADDR + sizeof(gd_t)); - - /* Align to 4 byte boundary */ - addr &= ~(4 - 1); - bd = (bd_t *) addr; + bd = (bd_t *) (CONFIG_SYS_BD_INFO_ADDR); gd->bd = bd; - memset((void *)bd, 0, sizeof(bd_t)); + memset((void *)bd, 0, GENERATED_BD_INFO_SIZE); bd->bi_r_version = version_string; - bd->bi_cpu = BFIN_CPU; + bd->bi_cpu = MK_STR(CONFIG_BFIN_CPU); bd->bi_board_name = BFIN_BOARD_NAME; bd->bi_vco = get_vco(); bd->bi_cclk = get_cclk(); @@ -283,8 +277,11 @@ void board_init_f(ulong bootflag) printf("Core: %s MHz, ", strmhz(buf, get_cclk())); printf("System: %s MHz\n", strmhz(buf, get_sclk())); - printf("RAM: "); - print_size(bd->bi_memsize, "\n"); + if (CONFIG_MEM_SIZE) { + printf("RAM: "); + print_size(bd->bi_memsize, "\n"); + } + #if defined(CONFIG_POST) post_init_f(); post_bootmode_init(); @@ -393,7 +390,7 @@ void board_init_r(gd_t * id, ulong dest_addr) post_run(NULL, POST_RAM | post_bootmode_get(0)); #endif - if (bfin_os_log_check()) { + if (CONFIG_MEM_SIZE && bfin_os_log_check()) { puts("\nLog buffer from operating system:\n"); bfin_os_log_dump(); puts("\n"); diff --git a/arch/blackfin/lib/u-boot.lds.S b/arch/blackfin/lib/u-boot.lds.S index f15c97e..2b8d285 100644 --- a/arch/blackfin/lib/u-boot.lds.S +++ b/arch/blackfin/lib/u-boot.lds.S @@ -40,9 +40,13 @@ * This is here in the first place so we can quickly test building * for different CPU's which may lack non-cache L1 data. */ +#ifndef L1_DATA_A_SRAM +# define L1_DATA_A_SRAM 0 +# define L1_DATA_A_SRAM_SIZE 0 +#endif #ifndef L1_DATA_B_SRAM -# define L1_DATA_B_SRAM CONFIG_SYS_MONITOR_BASE -# define L1_DATA_B_SRAM_SIZE 0 +# define L1_DATA_B_SRAM L1_DATA_A_SRAM +# define L1_DATA_B_SRAM_SIZE L1_DATA_A_SRAM_SIZE #endif /* The 0xC offset is so we don't clobber the tiny LDR jump block. */ @@ -138,7 +142,7 @@ SECTIONS } >l1_data AT>ram_data __data_l1_lma = LOADADDR(.data_l1); __data_l1_len = SIZEOF(.data_l1); - ASSERT (__data_l1_len <= L1_DATA_B_SRAM_SIZE, "L1 data B overflow!") + ASSERT (__data_l1_len <= L1_DATA_B_SRAM_SIZE, "L1 data overflow!") .bss : { diff --git a/arch/m68k/config.mk b/arch/m68k/config.mk index 749c389..863f3dd 100644 --- a/arch/m68k/config.mk +++ b/arch/m68k/config.mk @@ -24,7 +24,7 @@ CROSS_COMPILE ?= m68k-elf- clibdir = $(shell dirname `$(CC) $(CFLAGS) -print-file-name=libc.a`) -STANDALONE_LOAD_ADDR = 0x20000 -L $(clibdir) +CONFIG_STANDALONE_LOAD_ADDR ?= 0x20000 -L $(clibdir) PLATFORM_CPPFLAGS += -DCONFIG_M68K -D__M68K__ PLATFORM_LDFLAGS += -n diff --git a/arch/m68k/lib/board.c b/arch/m68k/lib/board.c index f824b34..6a892db 100644 --- a/arch/m68k/lib/board.c +++ b/arch/m68k/lib/board.c @@ -277,9 +277,13 @@ board_init_f (ulong bootflag) debug ("Top of RAM usable for U-Boot at: %08lx\n", addr); #ifdef CONFIG_LCD +#ifdef CONFIG_FB_ADDR + gd->fb_base = CONFIG_FB_ADDR; +#else /* reserve memory for LCD display (always full pages) */ addr = lcd_setmem (addr); gd->fb_base = addr; +#endif /* CONFIG_FB_ADDR */ #endif /* CONFIG_LCD */ /* diff --git a/arch/m68k/lib/bootm.c b/arch/m68k/lib/bootm.c index 76a2fb2..1229ac7 100644 --- a/arch/m68k/lib/bootm.c +++ b/arch/m68k/lib/bootm.c @@ -71,7 +71,6 @@ int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *ima int ret; ulong cmd_start, cmd_end; - ulong bootmap_base; bd_t *kbd; void (*kernel) (bd_t *, ulong, ulong, ulong, ulong); struct lmb *lmb = &images->lmb; @@ -79,17 +78,15 @@ int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *ima if ((flag != 0) && (flag != BOOTM_STATE_OS_GO)) return 1; - bootmap_base = getenv_bootm_low(); - /* allocate space and init command line */ - ret = boot_get_cmdline (lmb, &cmd_start, &cmd_end, bootmap_base); + ret = boot_get_cmdline (lmb, &cmd_start, &cmd_end); if (ret) { puts("ERROR with allocation of cmdline\n"); goto error; } /* allocate space for kernel copy of board info */ - ret = boot_get_kbd (lmb, &kbd, bootmap_base); + ret = boot_get_kbd (lmb, &kbd); if (ret) { puts("ERROR with allocation of kernel bd\n"); goto error; diff --git a/arch/microblaze/config.mk b/arch/microblaze/config.mk index c3c9f95..abea70b 100644 --- a/arch/microblaze/config.mk +++ b/arch/microblaze/config.mk @@ -26,6 +26,6 @@ CROSS_COMPILE ?= mb- -STANDALONE_LOAD_ADDR = 0x80F00000 +CONFIG_STANDALONE_LOAD_ADDR ?= 0x80F00000 PLATFORM_CPPFLAGS += -ffixed-r31 -D__microblaze__ diff --git a/arch/mips/config.mk b/arch/mips/config.mk index aa06761..318d34b 100644 --- a/arch/mips/config.mk +++ b/arch/mips/config.mk @@ -23,7 +23,7 @@ CROSS_COMPILE ?= mips_4KC- -STANDALONE_LOAD_ADDR = 0x80200000 -T mips.lds +CONFIG_STANDALONE_LOAD_ADDR ?= 0x80200000 -T mips.lds PLATFORM_CPPFLAGS += -DCONFIG_MIPS -D__MIPS__ diff --git a/arch/mips/cpu/Makefile b/arch/mips/cpu/mips32/Makefile index 06df8d1..e315c1b 100644 --- a/arch/mips/cpu/Makefile +++ b/arch/mips/cpu/mips32/Makefile @@ -29,11 +29,6 @@ START = start.o SOBJS-y = cache.o COBJS-y = cpu.o interrupts.o -SOBJS-$(CONFIG_INCA_IP) += incaip_wdt.o -COBJS-$(CONFIG_INCA_IP) += asc_serial.o incaip_clock.o -COBJS-$(CONFIG_PURPLE) += asc_serial.o -COBJS-$(CONFIG_SOC_AU1X00) += au1x00_eth.o au1x00_serial.o au1x00_usb_ohci.o - SRCS := $(START:.o=.S) $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y)) START := $(addprefix $(obj),$(START)) diff --git a/arch/mips/cpu/mips32/au1x00/Makefile b/arch/mips/cpu/mips32/au1x00/Makefile new file mode 100644 index 0000000..dc58475 --- /dev/null +++ b/arch/mips/cpu/mips32/au1x00/Makefile @@ -0,0 +1,45 @@ +# +# (C) Copyright 2011 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(SOC).o + +COBJS = au1x00_eth.o au1x00_serial.o au1x00_usb_ohci.o + +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/arch/mips/cpu/au1x00_eth.c b/arch/mips/cpu/mips32/au1x00/au1x00_eth.c index c510799..c510799 100644 --- a/arch/mips/cpu/au1x00_eth.c +++ b/arch/mips/cpu/mips32/au1x00/au1x00_eth.c diff --git a/arch/mips/cpu/au1x00_serial.c b/arch/mips/cpu/mips32/au1x00/au1x00_serial.c index c25ba5a..c25ba5a 100644 --- a/arch/mips/cpu/au1x00_serial.c +++ b/arch/mips/cpu/mips32/au1x00/au1x00_serial.c diff --git a/arch/mips/cpu/au1x00_usb_ohci.c b/arch/mips/cpu/mips32/au1x00/au1x00_usb_ohci.c index 0bc2305..0bc2305 100644 --- a/arch/mips/cpu/au1x00_usb_ohci.c +++ b/arch/mips/cpu/mips32/au1x00/au1x00_usb_ohci.c diff --git a/arch/mips/cpu/au1x00_usb_ohci.h b/arch/mips/cpu/mips32/au1x00/au1x00_usb_ohci.h index bb9f351..bb9f351 100644 --- a/arch/mips/cpu/au1x00_usb_ohci.h +++ b/arch/mips/cpu/mips32/au1x00/au1x00_usb_ohci.h diff --git a/board/eNET/config.mk b/arch/mips/cpu/mips32/au1x00/config.mk index 9d2dfa53..568f333 100644 --- a/board/eNET/config.mk +++ b/arch/mips/cpu/mips32/au1x00/config.mk @@ -1,6 +1,6 @@ # -# (C) Copyright 2002 -# Daniel Engström, Omicron Ceti AB, daniel@omicron.se. +# (C) Copyright 2011 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this # project. @@ -21,4 +21,4 @@ # MA 02111-1307 USA # -LDPPFLAGS += -DFLASH_SIZE=0x40000 +PLATFORM_CPPFLAGS += -mtune=4kc diff --git a/arch/mips/cpu/cache.S b/arch/mips/cpu/mips32/cache.S index 4b30c89..2965938 100644 --- a/arch/mips/cpu/cache.S +++ b/arch/mips/cpu/mips32/cache.S @@ -311,11 +311,7 @@ LEAF(dcache_enable) * RETURNS: N/A * */ -#if defined(CONFIG_PURPLE) -# define CACHE_LOCK_SIZE (CONFIG_SYS_DCACHE_SIZE/2) -#else # define CACHE_LOCK_SIZE (CONFIG_SYS_DCACHE_SIZE) -#endif .globl mips_cache_lock .ent mips_cache_lock mips_cache_lock: diff --git a/arch/mips/cpu/config.mk b/arch/mips/cpu/mips32/config.mk index a173c54..4d1b273 100644 --- a/arch/mips/cpu/config.mk +++ b/arch/mips/cpu/mips32/config.mk @@ -20,13 +20,14 @@ # Foundation, Inc., 59 Temple Place, Suite 330, Boston, # MA 02111-1307 USA # -v=$(shell $(AS) --version | grep 'GNU assembler' | egrep -o '2\.[0-9\.]+' | cut -d. -f2) -MIPSFLAGS:=$(shell \ -if [ "$v" -lt "14" ]; then \ - echo "-mcpu=4kc"; \ -else \ - echo "-march=4kc -mtune=4kc"; \ -fi) + +# +# Default optimization level for MIPS32 +# +# Note: Toolchains with binutils prior to v2.16 +# are no longer supported by U-Boot MIPS tree! +# +MIPSFLAGS = -march=mips32r2 ifneq (,$(findstring 4KCle,$(CROSS_COMPILE))) ENDIANNESS = -EL diff --git a/arch/mips/cpu/cpu.c b/arch/mips/cpu/mips32/cpu.c index 3ae397c..3ae397c 100644 --- a/arch/mips/cpu/cpu.c +++ b/arch/mips/cpu/mips32/cpu.c diff --git a/board/purple/Makefile b/arch/mips/cpu/mips32/incaip/Makefile index 10e566d..9c2b1aa 100644 --- a/board/purple/Makefile +++ b/arch/mips/cpu/mips32/incaip/Makefile @@ -1,6 +1,5 @@ - # -# (C) Copyright 2003-2006 +# (C) Copyright 2011 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -24,16 +23,17 @@ include $(TOPDIR)/config.mk -LIB = $(obj)lib$(BOARD).o +LIB = $(obj)lib$(SOC).o -COBJS = $(BOARD).o flash.o sconsole.o -SOBJS = lowlevel_init.o +SOBJS = incaip_wdt.o +COBJS = incaip_clock.o asc_serial.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) + +all: $(obj).depend $(LIB) -$(LIB): $(obj).depend $(OBJS) $(SOBJS) +$(LIB): $(OBJS) $(call cmd_link_o_target, $(OBJS)) ######################################################################### diff --git a/arch/mips/cpu/asc_serial.c b/arch/mips/cpu/mips32/incaip/asc_serial.c index be686c2..7239804 100644 --- a/arch/mips/cpu/asc_serial.c +++ b/arch/mips/cpu/mips32/incaip/asc_serial.c @@ -3,47 +3,10 @@ */ #include <config.h> - -#ifdef CONFIG_PURPLE -#define serial_init asc_serial_init -#define serial_putc asc_serial_putc -#define serial_puts asc_serial_puts -#define serial_getc asc_serial_getc -#define serial_tstc asc_serial_tstc -#define serial_setbrg asc_serial_setbrg -#endif - #include <common.h> #include <asm/inca-ip.h> #include "asc_serial.h" -#ifdef CONFIG_PURPLE - -#undef ASC_FIFO_PRESENT -#define TOUT_LOOP 100000 - -/* Set base address for second FPI interrupt control register bank */ -#define SFPI_INTCON_BASEADDR 0xBF0F0000 - -/* Register offset from base address */ -#define FBS_ISR 0x00000000 /* Interrupt status register */ -#define FBS_IMR 0x00000008 /* Interrupt mask register */ -#define FBS_IDIS 0x00000010 /* Interrupt disable register */ - -/* Interrupt status register bits */ -#define FBS_ISR_AT 0x00000040 /* ASC transmit interrupt */ -#define FBS_ISR_AR 0x00000020 /* ASC receive interrupt */ -#define FBS_ISR_AE 0x00000010 /* ASC error interrupt */ -#define FBS_ISR_AB 0x00000008 /* ASC transmit buffer interrupt */ -#define FBS_ISR_AS 0x00000004 /* ASC start of autobaud detection interrupt */ -#define FBS_ISR_AF 0x00000002 /* ASC end of autobaud detection interrupt */ - -#else - -#define ASC_FIFO_PRESENT - -#endif - #define SET_BIT(reg, mask) reg |= (mask) #define CLEAR_BIT(reg, mask) reg &= (~mask) @@ -71,10 +34,8 @@ static volatile incaAsc_t *pAsc = (incaAsc_t *)INCA_IP_ASC; int serial_init (void) { -#ifdef CONFIG_INCA_IP /* we have to set PMU.EN13 bit to enable an ASC device*/ INCAASC_PMU_ENABLE(13); -#endif /* and we have to set CLC register*/ CLEAR_BIT(pAsc->asc_clc, ASCCLC_DISS); @@ -86,7 +47,6 @@ int serial_init (void) /* select input port */ pAsc->asc_pisel = (CONSOLE_TTY & 0x1); -#ifdef ASC_FIFO_PRESENT /* TXFIFO's filling level */ SET_BITFIELD(pAsc->asc_txfcon, ASCTXFCON_TXFITLMASK, ASCTXFCON_TXFITLOFF, INCAASC_TXFIFO_FL); @@ -98,25 +58,20 @@ int serial_init (void) ASCRXFCON_RXFITLOFF, INCAASC_RXFIFO_FL); /* enable RXFIFO */ SET_BIT(pAsc->asc_rxfcon, ASCRXFCON_RXFEN); -#endif /* enable error signals */ SET_BIT(pAsc->asc_con, ASCCON_FEN); SET_BIT(pAsc->asc_con, ASCCON_OEN); -#ifdef CONFIG_INCA_IP /* acknowledge ASC interrupts */ ASC_INTERRUPTS_CLEAR(INCAASC_IRQ_LINE_ALL); /* disable ASC interrupts */ ASC_INTERRUPTS_DISABLE(INCAASC_IRQ_LINE_ALL); -#endif -#ifdef ASC_FIFO_PRESENT /* set FIFOs into the transparent mode */ SET_BIT(pAsc->asc_txfcon, ASCTXFCON_TXTMEN); SET_BIT(pAsc->asc_rxfcon, ASCRXFCON_RXTMEN); -#endif /* set baud rate */ serial_setbrg(); @@ -132,11 +87,7 @@ void serial_setbrg (void) ulong uiReloadValue, fdv; ulong f_ASC; -#ifdef CONFIG_INCA_IP f_ASC = incaip_get_fpiclk(); -#else - f_ASC = ASC_CLOCK_RATE; -#endif #ifndef INCAASC_USE_FDV fdv = 2; @@ -261,15 +212,10 @@ static int serial_setopt (void) void serial_putc (const char c) { -#ifdef ASC_FIFO_PRESENT uint txFl = 0; -#else - uint timeout = 0; -#endif if (c == '\n') serial_putc ('\r'); -#ifdef ASC_FIFO_PRESENT /* check do we have a free space in the TX FIFO */ /* get current filling level */ do @@ -277,25 +223,9 @@ void serial_putc (const char c) txFl = ( pAsc->asc_fstat & ASCFSTAT_TXFFLMASK ) >> ASCFSTAT_TXFFLOFF; } while ( txFl == INCAASC_TXFIFO_FULL ); -#else - - while(!(*(volatile unsigned long*)(SFPI_INTCON_BASEADDR + FBS_ISR) & - FBS_ISR_AB)) - { - if (timeout++ > TOUT_LOOP) - { - break; - } - } -#endif pAsc->asc_tbuf = c; /* write char to Transmit Buffer Register */ -#ifndef ASC_FIFO_PRESENT - *(volatile unsigned long*)(SFPI_INTCON_BASEADDR + FBS_ISR) = FBS_ISR_AB | - FBS_ISR_AT; -#endif - /* check for errors */ if ( pAsc->asc_con & ASCCON_OE ) { @@ -324,10 +254,6 @@ int serial_getc (void) c = (char)(pAsc->asc_rbuf & symbol_mask); -#ifndef ASC_FIFO_PRESENT - *(volatile unsigned long*)(SFPI_INTCON_BASEADDR + FBS_ISR) = FBS_ISR_AR; -#endif - return c; } @@ -335,19 +261,10 @@ int serial_tstc (void) { int res = 1; -#ifdef ASC_FIFO_PRESENT if ( (pAsc->asc_fstat & ASCFSTAT_RXFFLMASK) == 0 ) { res = 0; } -#else - if (!(*(volatile unsigned long*)(SFPI_INTCON_BASEADDR + FBS_ISR) & - FBS_ISR_AR)) - - { - res = 0; - } -#endif else if ( pAsc->asc_con & ASCCON_FE ) { SET_BIT(pAsc->asc_whbcon, ASCWHBCON_CLRFE); diff --git a/arch/mips/cpu/asc_serial.h b/arch/mips/cpu/mips32/incaip/asc_serial.h index 7ffdcfa..7ffdcfa 100644 --- a/arch/mips/cpu/asc_serial.h +++ b/arch/mips/cpu/mips32/incaip/asc_serial.h diff --git a/board/st/nhk8815/config.mk b/arch/mips/cpu/mips32/incaip/config.mk index 1789717..568f333 100644 --- a/board/st/nhk8815/config.mk +++ b/arch/mips/cpu/mips32/incaip/config.mk @@ -1,5 +1,6 @@ -# (C) Copyright 2007 -# STMicroelectronics, <www.st.com> +# +# (C) Copyright 2011 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this # project. @@ -19,8 +20,5 @@ # Foundation, Inc., 59 Temple Place, Suite 330, Boston, # MA 02111-1307 USA # -# -# image should be loaded at 0x01000000 -# -CONFIG_SYS_TEXT_BASE = 0x03F80000 +PLATFORM_CPPFLAGS += -mtune=4kc diff --git a/arch/mips/cpu/incaip_clock.c b/arch/mips/cpu/mips32/incaip/incaip_clock.c index b65dfe0..b65dfe0 100644 --- a/arch/mips/cpu/incaip_clock.c +++ b/arch/mips/cpu/mips32/incaip/incaip_clock.c diff --git a/arch/mips/cpu/incaip_wdt.S b/arch/mips/cpu/mips32/incaip/incaip_wdt.S index 3ade3cd..3ade3cd 100644 --- a/arch/mips/cpu/incaip_wdt.S +++ b/arch/mips/cpu/mips32/incaip/incaip_wdt.S diff --git a/arch/mips/cpu/interrupts.c b/arch/mips/cpu/mips32/interrupts.c index 87f7a9f..87f7a9f 100644 --- a/arch/mips/cpu/interrupts.c +++ b/arch/mips/cpu/mips32/interrupts.c diff --git a/arch/mips/cpu/start.S b/arch/mips/cpu/mips32/start.S index d6bcef6..e661d46 100644 --- a/arch/mips/cpu/start.S +++ b/arch/mips/cpu/mips32/start.S @@ -67,9 +67,6 @@ _start: #if defined(CONFIG_INCA_IP) .word INFINEON_EBU_BOOTCFG /* EBU init code, fetched during booting */ .word 0x00000000 /* phase of the flash */ -#elif defined(CONFIG_PURPLE) - .word INFINEON_EBU_BOOTCFG /* EBU init code, fetched during booting */ - .word INFINEON_EBU_BOOTCFG /* EBU init code, fetched during booting */ #else RVECENT(romReserved,2) #endif @@ -203,30 +200,6 @@ _start: * 128 * 8 == 1024 == 0x400 * so this is address R_VEC+0x400 == 0xbfc00400 */ -#ifdef CONFIG_PURPLE -/* 0xbfc00400 */ - .word 0xdc870000 - .word 0xfca70000 - .word 0x20840008 - .word 0x20a50008 - .word 0x20c6ffff - .word 0x14c0fffa - .word 0x00000000 - .word 0x03e00008 - .word 0x00000000 - .word 0x00000000 -/* 0xbfc00428 */ - .word 0xdc870000 - .word 0xfca70000 - .word 0x20840008 - .word 0x20a50008 - .word 0x20c6ffff - .word 0x14c0fffa - .word 0x00000000 - .word 0x03e00008 - .word 0x00000000 - .word 0x00000000 -#endif /* CONFIG_PURPLE */ .align 4 reset: @@ -337,17 +310,12 @@ relocate_code: move a0, t1 /* a0 <-- destination addr */ sub a1, t2, t0 /* a1 <-- size */ - /* On the purple board we copy the code earlier in a special way - * in order to solve flash problems - */ -#ifndef CONFIG_PURPLE 1: lw t3, 0(t0) sw t3, 0(t1) addu t0, 4 ble t0, t2, 1b addu t1, 4 /* delay slot */ -#endif /* If caches were enabled, we would have to flush them here. */ diff --git a/arch/mips/include/asm/inca-ip.h b/arch/mips/include/asm/inca-ip.h index e787a1d..26f1002 100644 --- a/arch/mips/include/asm/inca-ip.h +++ b/arch/mips/include/asm/inca-ip.h @@ -894,12 +894,7 @@ /* Module : EBU register address and bits */ /***********************************************************************/ -#if defined(CONFIG_INCA_IP) #define INCA_IP_EBU (0xB8000200) -#elif defined(CONFIG_PURPLE) -#define INCA_IP_EBU (0xB800D800) -#endif - /***********************************************************************/ @@ -1495,12 +1490,7 @@ If set and clear bit are written concurrently with 1, the associated bit is not /* Module : ASC register address and bits */ /***********************************************************************/ -#if defined(CONFIG_INCA_IP) #define INCA_IP_ASC (0xB8000400) -#elif defined(CONFIG_PURPLE) -#define INCA_IP_ASC (0xBE500000) -#endif - /***********************************************************************/ diff --git a/arch/mips/lib/board.c b/arch/mips/lib/board.c index f317124..623c4d7 100644 --- a/arch/mips/lib/board.c +++ b/arch/mips/lib/board.c @@ -162,9 +162,6 @@ void board_init_f(ulong bootflag) init_fnc_t **init_fnc_ptr; ulong addr, addr_sp, len = (ulong)&uboot_end - CONFIG_SYS_MONITOR_BASE; ulong *s; -#ifdef CONFIG_PURPLE - void copy_code (ulong); -#endif /* Pointer is writable since we allocated a register for it. */ @@ -253,13 +250,6 @@ void board_init_f(ulong bootflag) memcpy (id, (void *)gd, sizeof (gd_t)); - /* On the purple board we copy the code in a special way - * in order to solve flash problems - */ -#ifdef CONFIG_PURPLE - copy_code(addr); -#endif - relocate_code (addr_sp, id, addr); /* NOTREACHED - relocate_code() does not return */ diff --git a/arch/nios2/config.mk b/arch/nios2/config.mk index d241a96..e58ea24 100644 --- a/arch/nios2/config.mk +++ b/arch/nios2/config.mk @@ -29,7 +29,5 @@ STANDALONE_LOAD_ADDR ?= 0x02000000 PLATFORM_CPPFLAGS += -DCONFIG_NIOS2 -D__NIOS2__ PLATFORM_CPPFLAGS += -G0 -LDSCRIPT ?= $(SRCTREE)/$(CPUDIR)/u-boot.lds - LDFLAGS_FINAL += --gc-sections PLATFORM_RELFLAGS += -ffunction-sections -fdata-sections diff --git a/arch/powerpc/config.mk b/arch/powerpc/config.mk index 31e4416..a307154 100644 --- a/arch/powerpc/config.mk +++ b/arch/powerpc/config.mk @@ -23,23 +23,12 @@ CROSS_COMPILE ?= ppc_8xx- -STANDALONE_LOAD_ADDR = 0x40000 +CONFIG_STANDALONE_LOAD_ADDR ?= 0x40000 LDFLAGS_FINAL += --gc-sections -PLATFORM_RELFLAGS += -mrelocatable -ffunction-sections -fdata-sections +PLATFORM_RELFLAGS += -fpic -mrelocatable -ffunction-sections -fdata-sections PLATFORM_CPPFLAGS += -DCONFIG_PPC -D__powerpc__ PLATFORM_LDFLAGS += -n -ifdef CONFIG_SYS_LDSCRIPT -# need to strip off double quotes -LDSCRIPT := $(subst ",,$(CONFIG_SYS_LDSCRIPT)) -else ifdef CONFIG_NAND_SPL -LDSCRIPT := $(SRCTREE)/$(CONFIG_BOARDDIR)/u-boot-nand.lds -else -ifneq ($(wildcard $(SRCTREE)/arch/powerpc/cpu/$(CPU)/u-boot.lds),) -LDSCRIPT := $(SRCTREE)/arch/powerpc/cpu/$(CPU)/u-boot.lds -endif -endif - # # When cross-compiling on NetBSD, we have to define __PPC__ or else we # will pick up a va_list declaration that is incompatible with the diff --git a/arch/powerpc/cpu/74xx_7xx/config.mk b/arch/powerpc/cpu/74xx_7xx/config.mk index df1f6ac..fb0c715 100644 --- a/arch/powerpc/cpu/74xx_7xx/config.mk +++ b/arch/powerpc/cpu/74xx_7xx/config.mk @@ -21,6 +21,6 @@ # MA 02111-1307 USA # -PLATFORM_RELFLAGS += -fPIC -meabi +PLATFORM_RELFLAGS += -meabi PLATFORM_CPPFLAGS += -DCONFIG_74xx_7xx -ffixed-r2 -mstring diff --git a/arch/powerpc/cpu/mpc512x/config.mk b/arch/powerpc/cpu/mpc512x/config.mk index baf55cc..8fceded 100644 --- a/arch/powerpc/cpu/mpc512x/config.mk +++ b/arch/powerpc/cpu/mpc512x/config.mk @@ -20,7 +20,7 @@ # MA 02111-1307 USA # -PLATFORM_RELFLAGS += -fPIC -meabi +PLATFORM_RELFLAGS += -meabi PLATFORM_CPPFLAGS += -DCONFIG_MPC512X -DCONFIG_E300 \ -ffixed-r2 -msoft-float -mcpu=603e diff --git a/arch/powerpc/cpu/mpc512x/diu.c b/arch/powerpc/cpu/mpc512x/diu.c index c4108af..9dc1e48 100644 --- a/arch/powerpc/cpu/mpc512x/diu.c +++ b/arch/powerpc/cpu/mpc512x/diu.c @@ -51,20 +51,10 @@ void diu_set_pixel_clock(unsigned int pixclock) debug("DIU: Modified value of CLKDVDR = 0x%08x\n", in_be32(clkdvdr)); } -int platform_diu_init(unsigned int *xres, unsigned int *yres) +int platform_diu_init(unsigned int xres, unsigned int yres, const char *port) { - unsigned int pixel_format; - -#if defined(CONFIG_VIDEO_XRES) & defined(CONFIG_VIDEO_YRES) - *xres = CONFIG_VIDEO_XRES; - *yres = CONFIG_VIDEO_YRES; -#else - *xres = 1024; - *yres = 768; -#endif - pixel_format = 0x88883316; + unsigned int pixel_format = 0x88883316; debug("mpc5121_diu_init\n"); - - return fsl_diu_init(*xres, pixel_format, 0); + return fsl_diu_init(xres, pixel_format, 0); } diff --git a/arch/powerpc/cpu/mpc5xx/config.mk b/arch/powerpc/cpu/mpc5xx/config.mk index 1c7df00..ab55040 100644 --- a/arch/powerpc/cpu/mpc5xx/config.mk +++ b/arch/powerpc/cpu/mpc5xx/config.mk @@ -21,6 +21,6 @@ # MA 02111-1307 USA # -PLATFORM_RELFLAGS += -fPIC -meabi +PLATFORM_RELFLAGS += -meabi PLATFORM_CPPFLAGS += -DCONFIG_5xx -ffixed-r2 -mpowerpc -msoft-float diff --git a/arch/powerpc/cpu/mpc5xxx/config.mk b/arch/powerpc/cpu/mpc5xxx/config.mk index 832909f..fb87980 100644 --- a/arch/powerpc/cpu/mpc5xxx/config.mk +++ b/arch/powerpc/cpu/mpc5xxx/config.mk @@ -21,7 +21,7 @@ # MA 02111-1307 USA # -PLATFORM_RELFLAGS += -fPIC -meabi +PLATFORM_RELFLAGS += -meabi PLATFORM_CPPFLAGS += -DCONFIG_MPC5xxx -ffixed-r2 \ -mstring -mcpu=603e -mmultiple diff --git a/arch/powerpc/cpu/mpc8220/config.mk b/arch/powerpc/cpu/mpc8220/config.mk index 9142b91..2c638b5 100644 --- a/arch/powerpc/cpu/mpc8220/config.mk +++ b/arch/powerpc/cpu/mpc8220/config.mk @@ -21,7 +21,7 @@ # MA 02111-1307 USA # -PLATFORM_RELFLAGS += -fPIC -meabi +PLATFORM_RELFLAGS += -meabi PLATFORM_CPPFLAGS += -DCONFIG_MPC8220 -ffixed-r2 \ -mstring -mcpu=603e -mmultiple diff --git a/arch/powerpc/cpu/mpc824x/config.mk b/arch/powerpc/cpu/mpc824x/config.mk index 65a1771..82b8cc6 100644 --- a/arch/powerpc/cpu/mpc824x/config.mk +++ b/arch/powerpc/cpu/mpc824x/config.mk @@ -21,6 +21,6 @@ # MA 02111-1307 USA # -PLATFORM_RELFLAGS += -fPIC -meabi +PLATFORM_RELFLAGS += -meabi PLATFORM_CPPFLAGS += -DCONFIG_MPC824X -ffixed-r2 -mstring -mcpu=603e -msoft-float diff --git a/arch/powerpc/cpu/mpc8260/config.mk b/arch/powerpc/cpu/mpc8260/config.mk index 5e4645a..f091fa9 100644 --- a/arch/powerpc/cpu/mpc8260/config.mk +++ b/arch/powerpc/cpu/mpc8260/config.mk @@ -21,7 +21,7 @@ # MA 02111-1307 USA # -PLATFORM_RELFLAGS += -fPIC -meabi +PLATFORM_RELFLAGS += -meabi PLATFORM_CPPFLAGS += -DCONFIG_8260 -DCONFIG_CPM2 -ffixed-r2 \ -mstring -mcpu=603e -mmultiple diff --git a/arch/powerpc/cpu/mpc83xx/config.mk b/arch/powerpc/cpu/mpc83xx/config.mk index 0dced88..a79729e 100644 --- a/arch/powerpc/cpu/mpc83xx/config.mk +++ b/arch/powerpc/cpu/mpc83xx/config.mk @@ -20,7 +20,7 @@ # MA 02111-1307 USA # -PLATFORM_RELFLAGS += -fPIC -meabi +PLATFORM_RELFLAGS += -meabi PLATFORM_CPPFLAGS += -DCONFIG_MPC83xx -DCONFIG_E300 \ -ffixed-r2 -msoft-float diff --git a/arch/powerpc/cpu/mpc83xx/fdt.c b/arch/powerpc/cpu/mpc83xx/fdt.c index daf73a6..028c8f0 100644 --- a/arch/powerpc/cpu/mpc83xx/fdt.c +++ b/arch/powerpc/cpu/mpc83xx/fdt.c @@ -32,7 +32,8 @@ extern void ft_qe_setup(void *blob); DECLARE_GLOBAL_DATA_PTR; -#if defined(CONFIG_BOOTCOUNT_LIMIT) && defined(CONFIG_MPC8360) +#if defined(CONFIG_BOOTCOUNT_LIMIT) && \ + (defined(CONFIG_QE)) #include <asm/immap_qe.h> void fdt_fixup_muram (void *blob) diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile index cbb0fc6..d61d34c 100644 --- a/arch/powerpc/cpu/mpc85xx/Makefile +++ b/arch/powerpc/cpu/mpc85xx/Makefile @@ -55,9 +55,13 @@ COBJS-$(CONFIG_P1011) += ddr-gen3.o COBJS-$(CONFIG_P1012) += ddr-gen3.o COBJS-$(CONFIG_P1013) += ddr-gen3.o COBJS-$(CONFIG_P1014) += ddr-gen3.o +COBJS-$(CONFIG_P1015) += ddr-gen3.o +COBJS-$(CONFIG_P1016) += ddr-gen3.o COBJS-$(CONFIG_P1020) += ddr-gen3.o COBJS-$(CONFIG_P1021) += ddr-gen3.o COBJS-$(CONFIG_P1022) += ddr-gen3.o +COBJS-$(CONFIG_P1024) += ddr-gen3.o +COBJS-$(CONFIG_P1025) += ddr-gen3.o COBJS-$(CONFIG_P2010) += ddr-gen3.o COBJS-$(CONFIG_P2020) += ddr-gen3.o COBJS-$(CONFIG_PPC_P3041) += ddr-gen3.o @@ -69,7 +73,7 @@ COBJS-$(CONFIG_OF_LIBFDT) += fdt.o COBJS-$(CONFIG_FSL_CORENET) += liodn.o COBJS-$(CONFIG_MP) += mp.o COBJS-$(CONFIG_PCI) += pci.o -COBJS-$(CONFIG_FSL_CORENET) += portals.o +COBJS-$(CONFIG_SYS_DPAA_QBMAN) += portals.o # various SoC specific assignments COBJS-$(CONFIG_PPC_P3041) += p3041_ids.o @@ -87,12 +91,20 @@ COBJS-$(CONFIG_MPC8548) += mpc8548_serdes.o COBJS-$(CONFIG_MPC8568) += mpc8568_serdes.o COBJS-$(CONFIG_MPC8569) += mpc8569_serdes.o COBJS-$(CONFIG_MPC8572) += mpc8572_serdes.o +COBJS-$(CONFIG_P1010) += p1010_serdes.o COBJS-$(CONFIG_P1011) += p1021_serdes.o COBJS-$(CONFIG_P1012) += p1021_serdes.o COBJS-$(CONFIG_P1013) += p1022_serdes.o +COBJS-$(CONFIG_P1014) += p1010_serdes.o +COBJS-$(CONFIG_P1015) += p1021_serdes.o +COBJS-$(CONFIG_P1016) += p1021_serdes.o +COBJS-$(CONFIG_P1017) += p1023_serdes.o COBJS-$(CONFIG_P1020) += p1021_serdes.o COBJS-$(CONFIG_P1021) += p1021_serdes.o COBJS-$(CONFIG_P1022) += p1022_serdes.o +COBJS-$(CONFIG_P1023) += p1023_serdes.o +COBJS-$(CONFIG_P1024) += p1021_serdes.o +COBJS-$(CONFIG_P1025) += p1021_serdes.o COBJS-$(CONFIG_P2010) += p2020_serdes.o COBJS-$(CONFIG_P2020) += p2020_serdes.o COBJS-$(CONFIG_PPC_P3041) += p3041_serdes.o diff --git a/arch/powerpc/cpu/mpc85xx/cmd_errata.c b/arch/powerpc/cpu/mpc85xx/cmd_errata.c index e94975a..7b9f773 100644 --- a/arch/powerpc/cpu/mpc85xx/cmd_errata.c +++ b/arch/powerpc/cpu/mpc85xx/cmd_errata.c @@ -44,6 +44,12 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) #if defined(CONFIG_SYS_P4080_ERRATUM_SERDES8) puts("Work-around for Erratum SERDES8 enabled\n"); #endif +#if defined(CONFIG_SYS_P4080_ERRATUM_SERDES9) + puts("Work-around for Erratum SERDES9 enabled\n"); +#endif +#if defined(CONFIG_SYS_P4080_ERRATUM_SERDES_A005) + puts("Work-around for Erratum SERDES-A005 enabled\n"); +#endif #if defined(CONFIG_SYS_P4080_ERRATUM_CPU22) puts("Work-around for Erratum CPU22 enabled\n"); #endif diff --git a/arch/powerpc/cpu/mpc85xx/config.mk b/arch/powerpc/cpu/mpc85xx/config.mk index 66d1741..68ac57d 100644 --- a/arch/powerpc/cpu/mpc85xx/config.mk +++ b/arch/powerpc/cpu/mpc85xx/config.mk @@ -21,7 +21,7 @@ # MA 02111-1307 USA # -PLATFORM_RELFLAGS += -fPIC -meabi +PLATFORM_RELFLAGS += -meabi PLATFORM_CPPFLAGS += -ffixed-r2 -Wa,-me500 -msoft-float -mno-string diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c index 1aad2ba..f863f4a 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu.c +++ b/arch/powerpc/cpu/mpc85xx/cpu.c @@ -33,6 +33,7 @@ #include <asm/cache.h> #include <asm/io.h> #include <asm/mmu.h> +#include <asm/fsl_ifc.h> #include <asm/fsl_law.h> #include <asm/fsl_lbc.h> #include <post.h> @@ -233,13 +234,14 @@ int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) /* * Get timebase clock frequency */ +#ifndef CONFIG_SYS_FSL_TBCLK_DIV +#define CONFIG_SYS_FSL_TBCLK_DIV 8 +#endif unsigned long get_tbclk (void) { -#ifdef CONFIG_FSL_CORENET - return (gd->bus_clk + 8) / 16; -#else - return (gd->bus_clk + 4UL)/8UL; -#endif + unsigned long tbclk_div = CONFIG_SYS_FSL_TBCLK_DIV; + + return (gd->bus_clk + (tbclk_div >> 1)) / tbclk_div; } @@ -280,7 +282,8 @@ int cpu_mmc_init(bd_t *bis) /* * Print out the state of various machine registers. - * Currently prints out LAWs, BR0/OR0, and TLBs + * Currently prints out LAWs, BR0/OR0 for LBC, CSPR/CSOR/Timing + * parameters for IFC and TLBs */ void mpc85xx_reginfo(void) { @@ -289,11 +292,24 @@ void mpc85xx_reginfo(void) #if defined(CONFIG_FSL_LBC) print_lbc_regs(); #endif +#ifdef CONFIG_FSL_IFC + print_ifc_regs(); +#endif } /* Common ddr init for non-corenet fsl 85xx platforms */ #ifndef CONFIG_FSL_CORENET +#if defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_SYS_INIT_L2_ADDR) +phys_size_t initdram(int board_type) +{ +#if defined(CONFIG_SPD_EEPROM) || defined(CONFIG_DDR_SPD) + return fsl_ddr_sdram_size(); +#else + return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; +#endif +} +#else /* CONFIG_SYS_RAMBOOT */ phys_size_t initdram(int board_type) { phys_size_t dram_size = 0; @@ -343,6 +359,7 @@ phys_size_t initdram(int board_type) puts("DDR: "); return dram_size; } +#endif /* CONFIG_SYS_RAMBOOT */ #endif #if CONFIG_POST & CONFIG_SYS_POST_MEMORY diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c index 8ece970..b3da970 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c @@ -37,6 +37,10 @@ #include <asm/fsl_law.h> #include <asm/fsl_serdes.h> #include "mp.h" +#ifdef CONFIG_SYS_QE_FW_IN_NAND +#include <nand.h> +#include <errno.h> +#endif DECLARE_GLOBAL_DATA_PTR; @@ -141,6 +145,22 @@ static void enable_cpc(void) for (i = 0; i < CONFIG_SYS_NUM_CPC; i++, cpc++) { u32 cpccfg0 = in_be32(&cpc->cpccfg0); size += CPC_CFG0_SZ_K(cpccfg0); +#ifdef CONFIG_RAMBOOT_PBL + if (in_be32(&cpc->cpcsrcr0) & CPC_SRCR0_SRAMEN) { + /* find and disable LAW of SRAM */ + struct law_entry law = find_law(CONFIG_SYS_INIT_L3_ADDR); + + if (law.index == -1) { + printf("\nFatal error happened\n"); + return; + } + disable_law(law.index); + + clrbits_be32(&cpc->cpchdbcr0, CPC_HDBCR0_CDQ_SPEC_DIS); + out_be32(&cpc->cpccsr0, 0); + out_be32(&cpc->cpcsrcr0, 0); + } +#endif #ifdef CONFIG_SYS_FSL_ERRATUM_CPC_A002 setbits_be32(&cpc->cpchdbcr0, CPC_HDBCR0_TAG_ECC_SCRUB_DIS); @@ -164,6 +184,9 @@ void invalidate_cpc(void) cpc_corenet_t *cpc = (cpc_corenet_t *)CONFIG_SYS_FSL_CPC_ADDR; for (i = 0; i < CONFIG_SYS_NUM_CPC; i++, cpc++) { + /* skip CPC when it used as all SRAM */ + if (in_be32(&cpc->cpcsrcr0) & CPC_SRCR0_SRAMEN) + continue; /* Flash invalidate the CPC and clear all the locks */ out_be32(&cpc->cpccsr0, CPC_CSR0_FI | CPC_CSR0_LFC); while (in_be32(&cpc->cpccsr0) & (CPC_CSR0_FI | CPC_CSR0_LFC)) @@ -384,12 +407,6 @@ int cpu_init_r(void) enable_cpc(); -#ifdef CONFIG_QE - uint qe_base = CONFIG_SYS_IMMR + 0x00080000; /* QE immr base */ - qe_init(qe_base); - qe_reset(); -#endif - /* needs to be in ram since code uses global static vars */ fsl_serdes_init(); @@ -419,6 +436,23 @@ int cpu_init_r(void) isync(); #endif +#ifdef CONFIG_SYS_FSL_USB1_PHY_ENABLE + { + ccsr_usb_phy_t *usb_phy1 = + (void *)CONFIG_SYS_MPC85xx_USB1_PHY_ADDR; + out_be32(&usb_phy1->usb_enable_override, + CONFIG_SYS_FSL_USB_ENABLE_OVERRIDE); + } +#endif +#ifdef CONFIG_SYS_FSL_USB2_PHY_ENABLE + { + ccsr_usb_phy_t *usb_phy2 = + (void *)CONFIG_SYS_MPC85xx_USB2_PHY_ADDR; + out_be32(&usb_phy2->usb_enable_override, + CONFIG_SYS_FSL_USB_ENABLE_OVERRIDE); + } +#endif + return 0; } @@ -449,3 +483,25 @@ int sata_initialize(void) return 1; } #endif + +void cpu_secondary_init_r(void) +{ +#ifdef CONFIG_QE + uint qe_base = CONFIG_SYS_IMMR + 0x00080000; /* QE immr base */ +#ifdef CONFIG_SYS_QE_FW_IN_NAND + int ret; + size_t fw_length = CONFIG_SYS_QE_FW_LENGTH; + + /* load QE firmware from NAND flash to DDR first */ + ret = nand_read(&nand_info[0], (loff_t)CONFIG_SYS_QE_FW_IN_NAND, + &fw_length, (u_char *)CONFIG_SYS_QE_FW_ADDR); + + if (ret && ret == -EUCLEAN) { + printf ("NAND read for QE firmware at offset %x failed %d\n", + CONFIG_SYS_QE_FW_IN_NAND, ret); + } +#endif + qe_init(qe_base); + qe_reset(); +#endif +} diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init_nand.c b/arch/powerpc/cpu/mpc85xx/cpu_init_nand.c index 8fb27ab..796d398 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu_init_nand.c +++ b/arch/powerpc/cpu/mpc85xx/cpu_init_nand.c @@ -33,17 +33,15 @@ void cpu_init_f(void) */ out_be32(&lbc->lcrr, LCRR_DBYP | LCRR_CLKDIV_8); -#if defined(CONFIG_NAND_BR_PRELIM) && defined(CONFIG_NAND_OR_PRELIM) - set_lbc_br(0, CONFIG_NAND_BR_PRELIM); - set_lbc_or(0, CONFIG_NAND_OR_PRELIM); +#if defined(CONFIG_SYS_NAND_BR_PRELIM) && defined(CONFIG_SYS_NAND_OR_PRELIM) + set_lbc_br(0, CONFIG_SYS_NAND_BR_PRELIM); + set_lbc_or(0, CONFIG_SYS_NAND_OR_PRELIM); #else -#error CONFIG_NAND_BR_PRELIM, CONFIG_NAND_OR_PRELIM must be defined +#error CONFIG_SYS_NAND_BR_PRELIM, CONFIG_SYS_NAND_OR_PRELIM must be defined #endif #if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L2_ADDR) ccsr_l2cache_t *l2cache = (void *)CONFIG_SYS_MPC85xx_L2_ADDR; - char *l2srbar; - int i; out_be32(&l2cache->l2srbar0, CONFIG_SYS_INIT_L2_ADDR); @@ -54,10 +52,5 @@ void cpu_init_f(void) /* set L2E=1 & L2SRAM=001 */ out_be32(&l2cache->l2ctl, (MPC85xx_L2CTL_L2E | MPC85xx_L2CTL_L2SRAM_ENTIRE)); - - /* Initialize L2 SRAM to zero */ - l2srbar = (char *)CONFIG_SYS_INIT_L2_ADDR; - for (i = 0; i < CONFIG_SYS_L2_SIZE; i++) - l2srbar[i] = 0; #endif } diff --git a/arch/powerpc/cpu/mpc85xx/fdt.c b/arch/powerpc/cpu/mpc85xx/fdt.c index 00fa752..6e909b5 100644 --- a/arch/powerpc/cpu/mpc85xx/fdt.c +++ b/arch/powerpc/cpu/mpc85xx/fdt.c @@ -338,6 +338,9 @@ void fdt_add_enet_stashing(void *fdt) do_fixup_by_compat_u32(fdt, "gianfar", "rx-stash-len", 96, 1); do_fixup_by_compat_u32(fdt, "gianfar", "rx-stash-idx", 0, 1); + do_fixup_by_compat(fdt, "fsl,etsec2", "bd-stash", NULL, 0, 1); + do_fixup_by_compat_u32(fdt, "fsl,etsec2", "rx-stash-len", 96, 1); + do_fixup_by_compat_u32(fdt, "fsl,etsec2", "rx-stash-idx", 0, 1); } #if defined(CONFIG_SYS_DPAA_FMAN) || defined(CONFIG_SYS_DPAA_PME) @@ -470,6 +473,7 @@ void ft_cpu_setup(void *blob, bd_t *bd) fdt_portal(blob, "fsl,bman-portal", "bman-portals", (u64)CONFIG_SYS_BMAN_MEM_PHYS, CONFIG_SYS_BMAN_MEM_SIZE); + fdt_fixup_bportals(blob); #endif #if defined(CONFIG_SYS_QMAN_MEM_PHYS) @@ -483,4 +487,13 @@ void ft_cpu_setup(void *blob, bd_t *bd) #ifdef CONFIG_SYS_SRIO ft_srio_setup(blob); #endif + + /* + * system-clock = CCB clock/2 + * Here gd->bus_clk = CCB clock + * We are using the system clock as 1588 Timer reference + * clock source select + */ + do_fixup_by_compat_u32(blob, "fsl,gianfar-ptp-timer", + "timer-frequency", gd->bus_clk/2, 1); } diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c index 7fc00d8..741a0f8 100644 --- a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c +++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c @@ -29,6 +29,7 @@ #include <asm/io.h> #include <asm/processor.h> #include <asm/fsl_law.h> +#include <asm/errno.h> #include "fsl_corenet_serdes.h" static u32 serdes_prtcl_map; @@ -91,7 +92,7 @@ int serdes_get_lane_idx(int lane) return lanes[lane].idx; } -int serdes_get_bank(int lane) +int serdes_get_bank_by_lane(int lane) { return lanes[lane].bank; } @@ -109,10 +110,13 @@ int serdes_lane_enabled(int lane) return 0; #ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8 - if (!IS_SVR_REV(get_svr(), 1, 0)) - if (bank > 0) - return !(srds_lpd_b[bank] & - (8 >> (lane - (6 + 4 * bank)))); + /* + * For banks two and three, use the srds_lpd_b[] array instead of the + * RCW, because this array contains the real values of SRDS_LPD_B2 and + * SRDS_LPD_B3. + */ + if (bank > 0) + return !(srds_lpd_b[bank] & (8 >> (lane - (6 + 4 * bank)))); #endif return !(in_be32(&gur->rcwsr[word]) & (0x80000000 >> bit)); @@ -129,6 +133,125 @@ int is_serdes_configured(enum srds_prtcl device) return (1 << device) & serdes_prtcl_map; } +static int __serdes_get_first_lane(uint32_t prtcl, enum srds_prtcl device) +{ + int i; + + for (i = 0; i < SRDS_MAX_LANES; i++) { + if (serdes_get_prtcl(prtcl, i) == device) + return i; + } + + return -ENODEV; +} + +/* + * Returns the SERDES lane (0..SRDS_MAX_LANES-1) that routes to the given + * device. This depends on the current SERDES protocol, as defined in the RCW. + * + * Returns a negative error code if SERDES is disabled or the given device is + * not supported in the current SERDES protocol. + */ +int serdes_get_first_lane(enum srds_prtcl device) +{ + u32 prtcl; + const ccsr_gur_t *gur; + + gur = (typeof(gur))CONFIG_SYS_MPC85xx_GUTS_ADDR; + + /* Is serdes enabled at all? */ + if (unlikely((in_be32(&gur->rcwsr[5]) & 0x2000) == 0)) + return -ENODEV; + + prtcl = (in_be32(&gur->rcwsr[4]) & FSL_CORENET_RCWSR4_SRDS_PRTCL) >> 26; + + return __serdes_get_first_lane(prtcl, device); +} + +#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES9 +/* + * Returns the SERDES bank (1, 2, or 3) that a given device is on for a given + * SERDES protocol. + * + * Returns a negative error code if the given device is not supported for the + * given SERDES protocol. + */ +static int serdes_get_bank_by_device(uint32_t prtcl, enum srds_prtcl device) +{ + int lane; + + lane = __serdes_get_first_lane(prtcl, device); + if (unlikely(lane < 0)) + return lane; + + return serdes_get_bank_by_lane(lane); +} + +static uint32_t __serdes_get_lane_count(uint32_t prtcl, enum srds_prtcl device, + int first) +{ + int lane; + + for (lane = first; lane < SRDS_MAX_LANES; lane++) { + if (serdes_get_prtcl(prtcl, lane) != device) + break; + } + + return lane - first; +} + +static void __serdes_reset_rx(serdes_corenet_t *regs, + uint32_t prtcl, + enum srds_prtcl device) +{ + int lane, idx, first, last; + + lane = __serdes_get_first_lane(prtcl, device); + if (unlikely(lane < 0)) + return; + first = serdes_get_lane_idx(lane); + last = first + __serdes_get_lane_count(prtcl, device, lane); + + /* + * Set BnGCRy0[RRST] = 0 for each lane in the each bank that is + * selected as XAUI to place the lane into reset. + */ + for (idx = first; idx < last; idx++) + clrbits_be32(®s->lane[idx].gcr0, SRDS_GCR0_RRST); + + /* Wait at least 250 ns */ + udelay(1); + + /* + * Set BnGCRy0[RRST] = 1 for each lane in the each bank that is + * selected as XAUI to bring the lane out of reset. + */ + for (idx = first; idx < last; idx++) + setbits_be32(®s->lane[idx].gcr0, SRDS_GCR0_RRST); +} + +void serdes_reset_rx(enum srds_prtcl device) +{ + u32 prtcl; + const ccsr_gur_t *gur; + serdes_corenet_t *regs; + + if (unlikely(device == NONE)) + return; + + gur = (typeof(gur))CONFIG_SYS_MPC85xx_GUTS_ADDR; + + /* Is serdes enabled at all? */ + if (unlikely((in_be32(&gur->rcwsr[5]) & 0x2000) == 0)) + return; + + regs = (typeof(regs))CONFIG_SYS_FSL_CORENET_SERDES_ADDR; + prtcl = (in_be32(&gur->rcwsr[4]) & FSL_CORENET_RCWSR4_SRDS_PRTCL) >> 26; + + __serdes_reset_rx(regs, prtcl, device); +} +#endif + #ifndef CONFIG_SYS_DCSRBAR_PHYS #define CONFIG_SYS_DCSRBAR_PHYS 0x80000000 /* Must be 1GB-aligned for rev1.0 */ #define CONFIG_SYS_DCSRBAR 0x80000000 @@ -263,6 +386,74 @@ static void p4080_erratum_serdes8(serdes_corenet_t *regs, ccsr_gur_t *gur, } #endif +#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES_A005 +/* + * If PCIe is not selected as a protocol for any lanes driven by a given PLL, + * that PLL should have SRDSBnPLLCR1[PLLBW_SEL] = 0. + */ +static void p4080_erratum_serdes_a005(serdes_corenet_t *regs, unsigned int cfg) +{ + enum srds_prtcl device; + + switch (cfg) { + case 0x13: + case 0x16: + /* + * If SRDS_PRTCL = 0x13 or 0x16, set SRDSB1PLLCR1[PLLBW_SEL] + * to 0. + */ + clrbits_be32(®s->bank[FSL_SRDS_BANK_1].pllcr1, + SRDS_PLLCR1_PLL_BWSEL); + break; + case 0x19: + /* + * If SRDS_PRTCL = 0x19, set SRDSB1PLLCR1[PLLBW_SEL] to 0 and + * SRDSB3PLLCR1[PLLBW_SEL] to 1. + */ + clrbits_be32(®s->bank[FSL_SRDS_BANK_1].pllcr1, + SRDS_PLLCR1_PLL_BWSEL); + setbits_be32(®s->bank[FSL_SRDS_BANK_3].pllcr1, + SRDS_PLLCR1_PLL_BWSEL); + break; + } + + /* + * Set SRDSBnPLLCR1[PLLBW_SEL] to 0 for each bank that selects XAUI + * before XAUI is initialized. + */ + for (device = XAUI_FM1; device <= XAUI_FM2; device++) { + if (is_serdes_configured(device)) { + int bank = serdes_get_bank_by_device(cfg, device); + + clrbits_be32(®s->bank[bank].pllcr1, + SRDS_PLLCR1_PLL_BWSEL); + } + } +} +#endif + +/* + * Wait for the RSTDONE bit to get set, or a one-second timeout. + */ +static void wait_for_rstdone(unsigned int bank) +{ + serdes_corenet_t *srds_regs = + (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR; + unsigned long long end_tick; + u32 rstctl; + + /* wait for reset complete or 1-second timeout */ + end_tick = usec2ticks(1000000) + get_ticks(); + do { + rstctl = in_be32(&srds_regs->bank[bank].rstctl); + if (rstctl & SRDS_RSTCTL_RSTDONE) + break; + } while (end_tick > get_ticks()); + + if (!(rstctl & SRDS_RSTCTL_RSTDONE)) + printf("SERDES: timeout resetting bank %u\n", bank); +} + void fsl_serdes_init(void) { ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); @@ -270,7 +461,6 @@ void fsl_serdes_init(void) serdes_corenet_t *srds_regs; int lane, bank, idx; enum srds_prtcl lane_prtcl; - long long end_tick; int have_bank[SRDS_MAX_BANK] = {}; #ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8 u32 serdes8_devdisr = 0; @@ -279,6 +469,12 @@ void fsl_serdes_init(void) const char *srds_lpd_arg; size_t arglen; #endif +#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES9 + enum srds_prtcl device; +#endif +#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES_A001 + int need_serdes_a001; /* TRUE == need work-around for SERDES A001 */ +#endif char buffer[HWCONFIG_BUFFER_SIZE]; char *buf = NULL; @@ -303,60 +499,76 @@ void fsl_serdes_init(void) } #ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8 - if (!IS_SVR_REV(get_svr(), 1, 0)) - for (bank = 1; bank < ARRAY_SIZE(srds_lpd_b); bank++) { - sprintf(srds_lpd_opt, "fsl_srds_lpd_b%u", bank + 1); - srds_lpd_arg = hwconfig_subarg_f("serdes", srds_lpd_opt, - &arglen, buf); - if (srds_lpd_arg) - srds_lpd_b[bank] = simple_strtoul(srds_lpd_arg, - NULL, 0); - } + /* + * Display a warning if banks two and three are not disabled in the RCW, + * since our work-around for SERDES8 depends on these banks being + * disabled at power-on. + */ +#define B2_B3 (FSL_CORENET_RCWSRn_SRDS_LPD_B2 | FSL_CORENET_RCWSRn_SRDS_LPD_B3) + if ((in_be32(&gur->rcwsr[5]) & B2_B3) != B2_B3) { + printf("Warning: SERDES8 requires banks two and " + "three to be disabled in the RCW\n"); + } + + /* + * Store the values of the fsl_srds_lpd_b2 and fsl_srds_lpd_b3 + * hwconfig options into the srds_lpd_b[] array. See README.p4080ds + * for a description of these options. + */ + for (bank = 1; bank < ARRAY_SIZE(srds_lpd_b); bank++) { + sprintf(srds_lpd_opt, "fsl_srds_lpd_b%u", bank + 1); + srds_lpd_arg = + hwconfig_subarg_f("serdes", srds_lpd_opt, &arglen, buf); + if (srds_lpd_arg) + srds_lpd_b[bank] = + simple_strtoul(srds_lpd_arg, NULL, 0) & 0xf; + } #endif /* Look for banks with all lanes disabled, and power down the bank. */ for (lane = 0; lane < SRDS_MAX_LANES; lane++) { enum srds_prtcl lane_prtcl = serdes_get_prtcl(cfg, lane); if (serdes_lane_enabled(lane)) { - have_bank[serdes_get_bank(lane)] = 1; + have_bank[serdes_get_bank_by_lane(lane)] = 1; serdes_prtcl_map |= (1 << lane_prtcl); } } #ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8 - if (IS_SVR_REV(get_svr(), 1, 0)) { - /* At least one bank must be disabled due to SERDES8. If - * no bank is found to be disabled based on lane - * disables, disable bank 3 because we can't turn off its - * lanes in the RCW without disabling MDIO due to erratum - * GEN8. - * - * This means that if you are relying on bank 3 being - * disabled to avoid SERDES8, in some cases you cannot - * also disable all lanes of another bank, or else bank - * 3 won't be disabled, leaving you with a configuration - * that isn't valid according to SERDES8 (e.g. if banks - * 2 and 3 have the same clock, and bank 1 is disabled - * instead of 3). - */ - for (bank = 0; bank < SRDS_MAX_BANK; bank++) { - if (!have_bank[bank]) - break; - } + /* + * Bank two uses the clock from bank three, so if bank two is enabled, + * then bank three must also be enabled. + */ + if (have_bank[FSL_SRDS_BANK_2]) + have_bank[FSL_SRDS_BANK_3] = 1; +#endif - if (bank == SRDS_MAX_BANK) - have_bank[FSL_SRDS_BANK_3] = 0; - } else { - if (have_bank[FSL_SRDS_BANK_2]) - have_bank[FSL_SRDS_BANK_3] = 1; - } +#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES_A001 + /* + * The work-aroud for erratum SERDES-A001 is needed only if bank two + * is disabled and bank three is enabled. + */ + need_serdes_a001 = + !have_bank[FSL_SRDS_BANK_2] && have_bank[FSL_SRDS_BANK_3]; #endif + /* Power down the banks we're not interested in */ for (bank = 0; bank < SRDS_MAX_BANK; bank++) { if (!have_bank[bank]) { printf("SERDES: bank %d disabled\n", bank + 1); +#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES_A001 + /* + * Erratum SERDES-A001 says bank two needs to be powered + * down after bank three is powered up, so don't power + * down bank two here. + */ + if (!need_serdes_a001 || (bank != FSL_SRDS_BANK_2)) + setbits_be32(&srds_regs->bank[bank].rstctl, + SRDS_RSTCTL_SDPD); +#else setbits_be32(&srds_regs->bank[bank].rstctl, SRDS_RSTCTL_SDPD); +#endif } } @@ -382,6 +594,35 @@ void fsl_serdes_init(void) printf("%s ", serdes_prtcl_str[lane_prtcl]); #endif +#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES9 + /* + * Set BnTTLCRy0[FLT_SEL] = 000011 and set BnTTLCRy0[17] = 1 for + * each of the SerDes lanes selected as SGMII, XAUI, SRIO, or + * AURORA before the device is initialized. + */ + switch (lane_prtcl) { + case SGMII_FM1_DTSEC1: + case SGMII_FM1_DTSEC2: + case SGMII_FM1_DTSEC3: + case SGMII_FM1_DTSEC4: + case SGMII_FM2_DTSEC1: + case SGMII_FM2_DTSEC2: + case SGMII_FM2_DTSEC3: + case SGMII_FM2_DTSEC4: + case XAUI_FM1: + case XAUI_FM2: + case SRIO1: + case SRIO2: + case AURORA: + clrsetbits_be32(&srds_regs->lane[idx].ttlcr0, + SRDS_TTLCR0_FLT_SEL_MASK, + SRDS_TTLCR0_FLT_SEL_750PPM | + SRDS_TTLCR0_PM_DIS); + default: + break; + } +#endif + #ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8 switch (lane_prtcl) { case PCIE1: @@ -428,13 +669,12 @@ void fsl_serdes_init(void) FSL_CORENET_DEVDISR2_DTSEC2_4; break; case XAUI_FM1: + serdes8_devdisr2 |= FSL_CORENET_DEVDISR2_FM1 | + FSL_CORENET_DEVDISR2_10GEC1; + break; case XAUI_FM2: - if (lane_prtcl == XAUI_FM1) - serdes8_devdisr2 |= FSL_CORENET_DEVDISR2_FM1 | - FSL_CORENET_DEVDISR2_10GEC1; - else - serdes8_devdisr2 |= FSL_CORENET_DEVDISR2_FM2 | - FSL_CORENET_DEVDISR2_10GEC2; + serdes8_devdisr2 |= FSL_CORENET_DEVDISR2_FM2 | + FSL_CORENET_DEVDISR2_10GEC2; break; case AURORA: break; @@ -449,25 +689,24 @@ void fsl_serdes_init(void) puts("\n"); #endif - for (idx = 0; idx < SRDS_MAX_BANK; idx++) { - u32 rstctl; +#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES_A005 + p4080_erratum_serdes_a005(srds_regs, cfg); +#endif + for (idx = 0; idx < SRDS_MAX_BANK; idx++) { bank = idx; #ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8 - if (!IS_SVR_REV(get_svr(), 1, 0)) { - /* - * Change bank init order to 0, 2, 1, so that the - * third bank's PLL is established before we - * start the second bank which shares the third - * bank's PLL. - */ + /* + * Change bank init order to 0, 2, 1, so that the third bank's + * PLL is established before we start the second bank. The + * second bank uses the third bank's PLL. + */ - if (idx == 1) - bank = FSL_SRDS_BANK_3; - else if (idx == 2) - bank = FSL_SRDS_BANK_2; - } + if (idx == 1) + bank = FSL_SRDS_BANK_3; + else if (idx == 2) + bank = FSL_SRDS_BANK_2; #endif /* Skip disabled banks */ @@ -475,32 +714,48 @@ void fsl_serdes_init(void) continue; #ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8 - if (!IS_SVR_REV(get_svr(), 1, 0)) { - if (idx == 1) { - p4080_erratum_serdes8(srds_regs, gur, - serdes8_devdisr, - serdes8_devdisr2, cfg); - } else if (idx == 2) { - enable_bank(gur, FSL_SRDS_BANK_2); - } + if (idx == 1) { + /* + * Re-enable devices on banks two and three that were + * disabled by the RCW, and then enable bank three. The + * devices need to be enabled before either bank is + * powered up. + */ + p4080_erratum_serdes8(srds_regs, gur, serdes8_devdisr, + serdes8_devdisr2, cfg); + } else if (idx == 2) { + /* Eable bank two now that bank three is enabled. */ + enable_bank(gur, FSL_SRDS_BANK_2); } #endif /* reset banks for errata */ setbits_be32(&srds_regs->bank[bank].rstctl, SRDS_RSTCTL_RST); - /* wait for reset complete or 1-second timeout */ - end_tick = usec2ticks(1000000) + get_ticks(); - do { - rstctl = in_be32(&srds_regs->bank[bank].rstctl); - if (rstctl & SRDS_RSTCTL_RSTDONE) - break; - } while (end_tick > get_ticks()); - - if (!(rstctl & SRDS_RSTCTL_RSTDONE)) { - printf("SERDES: timeout resetting bank %d\n", - bank + 1); - continue; - } + wait_for_rstdone(bank); } + +#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES_A001 + if (need_serdes_a001) { + /* + * Bank three has been enabled, so enable bank two and then + * disable it. + */ + srds_lpd_b[FSL_SRDS_BANK_2] = 0; + enable_bank(gur, FSL_SRDS_BANK_2); + + wait_for_rstdone(FSL_SRDS_BANK_2); + + /* Disable bank 2 */ + setbits_be32(&srds_regs->bank[FSL_SRDS_BANK_2].rstctl, + SRDS_RSTCTL_SDPD); + } +#endif + +#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES9 + for (device = XAUI_FM1; device <= XAUI_FM2; device++) { + if (is_serdes_configured(device)) + __serdes_reset_rx(srds_regs, cfg, device); + } +#endif } diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h index 42d771e..f261351 100644 --- a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h +++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h @@ -33,7 +33,7 @@ enum srds_bank { int is_serdes_prtcl_valid(u32 prtcl); int serdes_get_lane_idx(int lane); -int serdes_get_bank(int lane); +int serdes_get_bank_by_lane(int lane); int serdes_lane_enabled(int lane); enum srds_prtcl serdes_get_prtcl(int cfg, int lane); diff --git a/arch/powerpc/cpu/mpc85xx/p1010_serdes.c b/arch/powerpc/cpu/mpc85xx/p1010_serdes.c new file mode 100644 index 0000000..e8a0387 --- /dev/null +++ b/arch/powerpc/cpu/mpc85xx/p1010_serdes.c @@ -0,0 +1,75 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. + * Author: Prabhakar Kushwaha <prabhakar@freescale.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +#include <config.h> +#include <common.h> +#include <asm/io.h> +#include <asm/immap_85xx.h> +#include <asm/fsl_serdes.h> + +#define SRDS1_MAX_LANES 4 +#define SRDS2_MAX_LANES 2 + +static u32 serdes1_prtcl_map, serdes2_prtcl_map; + +static const u8 serdes1_cfg_tbl[][SRDS1_MAX_LANES] = { + [0x00] = {NONE, NONE, NONE, NONE}, + [0x01] = {PCIE1, PCIE2, SGMII_TSEC2, SGMII_TSEC3}, + [0x02] = {PCIE1, SGMII_TSEC1, SGMII_TSEC2, SGMII_TSEC3}, + [0x03] = {NONE, SGMII_TSEC1, SGMII_TSEC2, SGMII_TSEC3}, +}; + +static const u8 serdes2_cfg_tbl[][SRDS2_MAX_LANES] = { + [0x00] = {NONE, NONE}, + [0x01] = {SATA1, SATA2}, + [0x02] = {SATA1, SATA2}, + [0x03] = {PCIE1, PCIE2}, +}; + + +int is_serdes_configured(enum srds_prtcl device) +{ + int ret = (1 << device) & serdes1_prtcl_map; + + if (ret) + return ret; + + return (1 << device) & serdes2_prtcl_map; +} + +void fsl_serdes_init(void) +{ + ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; + u32 pordevsr = in_be32(&gur->pordevsr); + u32 srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> + MPC85xx_PORDEVSR_IO_SEL_SHIFT; + int lane; + + debug("PORDEVSR[IO_SEL_SRDS] = %x\n", srds_cfg); + + if (srds_cfg > ARRAY_SIZE(serdes1_cfg_tbl)) { + printf("Invalid PORDEVSR[IO_SEL_SRDS] = %d\n", srds_cfg); + return; + } + for (lane = 0; lane < SRDS1_MAX_LANES; lane++) { + enum srds_prtcl lane_prtcl = serdes1_cfg_tbl[srds_cfg][lane]; + serdes1_prtcl_map |= (1 << lane_prtcl); + } + + if (srds_cfg > ARRAY_SIZE(serdes2_cfg_tbl)) { + printf("Invalid PORDEVSR[IO_SEL_SRDS] = %d\n", srds_cfg); + return; + } + + for (lane = 0; lane < SRDS2_MAX_LANES; lane++) { + enum srds_prtcl lane_prtcl = serdes2_cfg_tbl[srds_cfg][lane]; + serdes2_prtcl_map |= (1 << lane_prtcl); + } +} diff --git a/arch/powerpc/cpu/mpc85xx/p1023_serdes.c b/arch/powerpc/cpu/mpc85xx/p1023_serdes.c new file mode 100644 index 0000000..c8ab5d6 --- /dev/null +++ b/arch/powerpc/cpu/mpc85xx/p1023_serdes.c @@ -0,0 +1,53 @@ +/* + * Copyright 2010-2011 Freescale Semiconductor, Inc. + * Author: Roy Zang <tie-fei.zang@freescale.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +#include <config.h> +#include <common.h> +#include <asm/io.h> +#include <asm/immap_85xx.h> +#include <asm/fsl_serdes.h> + +#define SRDS1_MAX_LANES 4 + +static u32 serdes1_prtcl_map; + +static const u8 serdes1_cfg_tbl[][SRDS1_MAX_LANES] = { + [0x00] = {PCIE1, PCIE2, NONE, NONE}, + [0x01] = {PCIE1, PCIE2, PCIE3, NONE}, + [0x02] = {PCIE1, PCIE2, PCIE3, SGMII_FM1_DTSEC2}, + [0x03] = {PCIE1, PCIE2, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2}, +}; + +int is_serdes_configured(enum srds_prtcl device) +{ + int ret = (1 << device) & serdes1_prtcl_map; + return ret; +} + +void fsl_serdes_init(void) +{ + ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; + u32 pordevsr = in_be32(&gur->pordevsr); + u32 srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> + MPC85xx_PORDEVSR_IO_SEL_SHIFT; + int lane; + + debug("PORDEVSR[IO_SEL_SRDS] = %x\n", srds_cfg); + + if (srds_cfg > ARRAY_SIZE(serdes1_cfg_tbl)) { + printf("Invalid PORDEVSR[IO_SEL_SRDS] = %d\n", srds_cfg); + return; + } + for (lane = 0; lane < SRDS1_MAX_LANES; lane++) { + enum srds_prtcl lane_prtcl = serdes1_cfg_tbl[srds_cfg][lane]; + serdes1_prtcl_map |= (1 << lane_prtcl); + } + +} diff --git a/arch/powerpc/cpu/mpc85xx/p3041_ids.c b/arch/powerpc/cpu/mpc85xx/p3041_ids.c index febbee9..1255898 100644 --- a/arch/powerpc/cpu/mpc85xx/p3041_ids.c +++ b/arch/powerpc/cpu/mpc85xx/p3041_ids.c @@ -1,5 +1,5 @@ /* - * Copyright 2010 Freescale Semiconductor, Inc. + * Copyright 2010-2011 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -52,10 +52,10 @@ struct liodn_id_table liodn_tbl[] = { SET_SATA_LIODN(1, 127), SET_SATA_LIODN(2, 128), - SET_PCI_LIODN(1, 193), - SET_PCI_LIODN(2, 194), - SET_PCI_LIODN(3, 195), - SET_PCI_LIODN(4, 196), + SET_PCI_LIODN("fsl,qoriq-pcie-v2.2", 1, 193), + SET_PCI_LIODN("fsl,qoriq-pcie-v2.2", 2, 194), + SET_PCI_LIODN("fsl,qoriq-pcie-v2.2", 3, 195), + SET_PCI_LIODN("fsl,qoriq-pcie-v2.2", 4, 196), SET_DMA_LIODN(1, 197), SET_DMA_LIODN(2, 198), diff --git a/arch/powerpc/cpu/mpc85xx/p4080_ids.c b/arch/powerpc/cpu/mpc85xx/p4080_ids.c index df25048..fd155c8 100644 --- a/arch/powerpc/cpu/mpc85xx/p4080_ids.c +++ b/arch/powerpc/cpu/mpc85xx/p4080_ids.c @@ -1,5 +1,5 @@ /* - * Copyright 2010 Freescale Semiconductor, Inc. + * Copyright 2010-2011 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -44,9 +44,9 @@ struct liodn_id_table liodn_tbl[] = { SET_SDHC_LIODN(1, 156), - SET_PCI_LIODN(1, 193), - SET_PCI_LIODN(2, 194), - SET_PCI_LIODN(3, 195), + SET_PCI_LIODN("fsl,p4080-pcie", 1, 193), + SET_PCI_LIODN("fsl,p4080-pcie", 2, 194), + SET_PCI_LIODN("fsl,p4080-pcie", 3, 195), SET_DMA_LIODN(1, 196), SET_DMA_LIODN(2, 197), diff --git a/arch/powerpc/cpu/mpc85xx/p5020_ids.c b/arch/powerpc/cpu/mpc85xx/p5020_ids.c index febbee9..1255898 100644 --- a/arch/powerpc/cpu/mpc85xx/p5020_ids.c +++ b/arch/powerpc/cpu/mpc85xx/p5020_ids.c @@ -1,5 +1,5 @@ /* - * Copyright 2010 Freescale Semiconductor, Inc. + * Copyright 2010-2011 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -52,10 +52,10 @@ struct liodn_id_table liodn_tbl[] = { SET_SATA_LIODN(1, 127), SET_SATA_LIODN(2, 128), - SET_PCI_LIODN(1, 193), - SET_PCI_LIODN(2, 194), - SET_PCI_LIODN(3, 195), - SET_PCI_LIODN(4, 196), + SET_PCI_LIODN("fsl,qoriq-pcie-v2.2", 1, 193), + SET_PCI_LIODN("fsl,qoriq-pcie-v2.2", 2, 194), + SET_PCI_LIODN("fsl,qoriq-pcie-v2.2", 3, 195), + SET_PCI_LIODN("fsl,qoriq-pcie-v2.2", 4, 196), SET_DMA_LIODN(1, 197), SET_DMA_LIODN(2, 198), diff --git a/arch/powerpc/cpu/mpc85xx/portals.c b/arch/powerpc/cpu/mpc85xx/portals.c index 01aec6e..c014163 100644 --- a/arch/powerpc/cpu/mpc85xx/portals.c +++ b/arch/powerpc/cpu/mpc85xx/portals.c @@ -1,5 +1,5 @@ /* - * Copyright 2008-2010 Freescale Semiconductor, Inc. + * Copyright 2008-2011 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -30,18 +30,14 @@ #include <asm/fsl_portals.h> #include <asm/fsl_liodn.h> -static ccsr_qman_t *qman = (void *)CONFIG_SYS_FSL_CORENET_QMAN_ADDR; +static ccsr_qman_t *qman = (void *)CONFIG_SYS_FSL_QMAN_ADDR; +static ccsr_bman_t *bman = (void *)CONFIG_SYS_FSL_BMAN_ADDR; void setup_portals(void) { +#ifdef CONFIG_FSL_CORENET int i; - /* Set the Qman initiator BAR to match the LAW (for DQRR stashing) */ -#ifdef CONFIG_PHYS_64BIT - out_be32(&qman->qcsp_bare, (u32)(CONFIG_SYS_QMAN_MEM_PHYS >> 32)); -#endif - out_be32(&qman->qcsp_bar, (u32)CONFIG_SYS_QMAN_MEM_PHYS); - for (i = 0; i < CONFIG_SYS_QMAN_NUM_PORTALS; i++) { u8 sdest = qp_info[i].sdest; u16 fliodn = qp_info[i].fliodn; @@ -53,6 +49,13 @@ void setup_portals(void) /* set frame liodn */ out_be32(&qman->qcsp[i].qcsp_io_cfg, (sdest << 16) | fliodn); } +#endif + + /* Set the Qman initiator BAR to match the LAW (for DQRR stashing) */ +#ifdef CONFIG_PHYS_64BIT + out_be32(&qman->qcsp_bare, (u32)(CONFIG_SYS_QMAN_MEM_PHYS >> 32)); +#endif + out_be32(&qman->qcsp_bar, (u32)CONFIG_SYS_QMAN_MEM_PHYS); } /* Update portal containter to match LAW setup of portal in phy map */ @@ -118,9 +121,12 @@ void fdt_portal(void *blob, const char *compat, const char *container, static int fdt_qportal(void *blob, int off, int id, char *name, enum fsl_dpaa_dev dev, int create) { - int childoff, dev_off, num, ret = 0; + int childoff, dev_off, ret = 0; uint32_t dev_handle; +#ifdef CONFIG_FSL_CORENET + int num; u32 liodns[2]; +#endif childoff = fdt_subnode_offset(blob, off, name); if (create) { @@ -154,9 +160,11 @@ static int fdt_qportal(void *blob, int off, int id, char *name, if (ret < 0) return ret; +#ifdef CONFIG_FSL_CORENET num = get_dpaa_liodn(dev, &liodns[0], id); ret = fdt_setprop(blob, childoff, "fsl,liodn", &liodns[0], sizeof(u32) * num); +#endif } else { return childoff; } @@ -184,7 +192,9 @@ void fdt_fixup_qportals(void *blob) off = fdt_node_offset_by_compatible(blob, -1, "fsl,qman-portal"); while (off != -FDT_ERR_NOTFOUND) { +#ifdef CONFIG_FSL_CORENET u32 liodns[2]; +#endif const int *ci = fdt_getprop(blob, off, "cell-index", NULL); int j, i = *ci; @@ -192,6 +202,7 @@ void fdt_fixup_qportals(void *blob) if (err < 0) goto err; +#ifdef CONFIG_FSL_CORENET liodns[0] = qp_info[i].dliodn; liodns[1] = qp_info[i].fliodn; @@ -199,6 +210,7 @@ void fdt_fixup_qportals(void *blob) &liodns, sizeof(u32) * 2); if (err < 0) goto err; +#endif i++; @@ -207,6 +219,7 @@ void fdt_fixup_qportals(void *blob) if (err < 0) goto err; +#ifdef CONFIG_FSL_CORENET #ifdef CONFIG_SYS_DPAA_PME err = fdt_qportal(blob, off, i, "pme@0", FSL_HW_PORTAL_PME, 1); if (err < 0) @@ -214,6 +227,8 @@ void fdt_fixup_qportals(void *blob) #else fdt_qportal(blob, off, i, "pme@0", FSL_HW_PORTAL_PME, 0); #endif +#endif + #ifdef CONFIG_SYS_DPAA_FMAN for (j = 0; j < CONFIG_SYS_NUM_FMAN; j++) { char name[] = "fman@0"; @@ -236,3 +251,32 @@ err: off = fdt_node_offset_by_compatible(blob, off, "fsl,qman-portal"); } } + +void fdt_fixup_bportals(void *blob) +{ + int off, err; + unsigned int maj, min; + u32 rev_1 = in_be32(&bman->ip_rev_1); + char compat[64]; + int compat_len; + + maj = (rev_1 >> 8) & 0xff; + min = rev_1 & 0xff; + + compat_len = sprintf(compat, "fsl,bman-portal-%u.%u", maj, min) + 1; + compat_len += sprintf(compat + compat_len, "fsl,bman-portal") + 1; + + off = fdt_node_offset_by_compatible(blob, -1, "fsl,bman-portal"); + while (off != -FDT_ERR_NOTFOUND) { + err = fdt_setprop(blob, off, "compatible", compat, compat_len); + if (err < 0) { + printf("ERROR: unable to create props for %s: %s\n", + fdt_get_name(blob, off, NULL), + fdt_strerror(err)); + return; + } + + off = fdt_node_offset_by_compatible(blob, off, "fsl,bman-portal"); + } + +} diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c index f2aa8d0..c4c156d 100644 --- a/arch/powerpc/cpu/mpc85xx/speed.c +++ b/arch/powerpc/cpu/mpc85xx/speed.c @@ -28,6 +28,7 @@ #include <common.h> #include <ppc_asm.tmpl> +#include <linux/compiler.h> #include <asm/processor.h> #include <asm/io.h> @@ -107,25 +108,45 @@ void get_sys_info (sys_info_t * sysInfo) #define PME_CLK_SEL 0x80000000 #define FM1_CLK_SEL 0x40000000 #define FM2_CLK_SEL 0x20000000 +#define HWA_ASYNC_DIV 0x04000000 +#if (CONFIG_SYS_FSL_NUM_CC_PLLS == 2) +#define HWA_CC_PLL 1 +#elif (CONFIG_SYS_FSL_NUM_CC_PLLS == 4) +#define HWA_CC_PLL 2 +#else +#error CONFIG_SYS_FSL_NUM_CC_PLLS not set or unknown case +#endif rcw_tmp = in_be32(&gur->rcwsr[7]); #ifdef CONFIG_SYS_DPAA_PME - if (rcw_tmp & PME_CLK_SEL) - sysInfo->freqPME = freqCC_PLL[2] / 2; - else + if (rcw_tmp & PME_CLK_SEL) { + if (rcw_tmp & HWA_ASYNC_DIV) + sysInfo->freqPME = freqCC_PLL[HWA_CC_PLL] / 4; + else + sysInfo->freqPME = freqCC_PLL[HWA_CC_PLL] / 2; + } else { sysInfo->freqPME = sysInfo->freqSystemBus / 2; + } #endif #ifdef CONFIG_SYS_DPAA_FMAN - if (rcw_tmp & FM1_CLK_SEL) - sysInfo->freqFMan[0] = freqCC_PLL[2] / 2; - else + if (rcw_tmp & FM1_CLK_SEL) { + if (rcw_tmp & HWA_ASYNC_DIV) + sysInfo->freqFMan[0] = freqCC_PLL[HWA_CC_PLL] / 4; + else + sysInfo->freqFMan[0] = freqCC_PLL[HWA_CC_PLL] / 2; + } else { sysInfo->freqFMan[0] = sysInfo->freqSystemBus / 2; + } #if (CONFIG_SYS_NUM_FMAN) == 2 - if (rcw_tmp & FM2_CLK_SEL) - sysInfo->freqFMan[1] = freqCC_PLL[2] / 2; - else + if (rcw_tmp & FM2_CLK_SEL) { + if (rcw_tmp & HWA_ASYNC_DIV) + sysInfo->freqFMan[1] = freqCC_PLL[HWA_CC_PLL] / 4; + else + sysInfo->freqFMan[1] = freqCC_PLL[HWA_CC_PLL] / 2; + } else { sysInfo->freqFMan[1] = sysInfo->freqSystemBus / 2; + } #endif #endif @@ -136,7 +157,7 @@ void get_sys_info (sys_info_t * sysInfo) #endif int i; #ifdef CONFIG_QE - u32 qe_ratio; + __maybe_unused u32 qe_ratio; #endif plat_ratio = (gur->porpllsr) & 0x0000003e; @@ -162,13 +183,23 @@ void get_sys_info (sys_info_t * sysInfo) sysInfo->freqDDRBus = ddr_ratio * CONFIG_DDR_CLK_FREQ; } #endif -#endif #ifdef CONFIG_QE +#if defined(CONFIG_P1012) || defined(CONFIG_P1016) || \ + defined(CONFIG_P1021) || defined(CONFIG_P1025) + sysInfo->freqQE = sysInfo->freqSystemBus; +#else qe_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_QE_RATIO) >> MPC85xx_PORPLLSR_QE_RATIO_SHIFT; sysInfo->freqQE = qe_ratio * CONFIG_SYS_CLK_FREQ; #endif +#endif + +#ifdef CONFIG_SYS_DPAA_FMAN + sysInfo->freqFMan[0] = sysInfo->freqSystemBus; +#endif + +#endif /* CONFIG_FSL_CORENET */ #if defined(CONFIG_FSL_LBC) #if defined(CONFIG_SYS_LBC_LCRR) @@ -254,7 +285,8 @@ int get_clocks (void) gd->i2c2_clk = gd->i2c1_clk; #if defined(CONFIG_FSL_ESDHC) -#ifdef CONFIG_MPC8569 +#if defined(CONFIG_MPC8569) || defined(CONFIG_P1010) ||\ + defined(CONFIG_P1014) gd->sdhc_clk = gd->bus_clk; #else gd->sdhc_clk = gd->bus_clk / 2; diff --git a/arch/powerpc/cpu/mpc85xx/tlb.c b/arch/powerpc/cpu/mpc85xx/tlb.c index 31143ba..295f175 100644 --- a/arch/powerpc/cpu/mpc85xx/tlb.c +++ b/arch/powerpc/cpu/mpc85xx/tlb.c @@ -1,5 +1,5 @@ /* - * Copyright 2008-2009 Freescale Semiconductor, Inc. + * Copyright 2008-2011 Freescale Semiconductor, Inc. * * (C) Copyright 2000 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -55,6 +55,7 @@ void init_tlbs(void) return ; } +#ifndef CONFIG_NAND_SPL void read_tlbcam_entry(int idx, u32 *valid, u32 *tsize, unsigned long *epn, phys_addr_t *rpn) { @@ -73,7 +74,6 @@ void read_tlbcam_entry(int idx, u32 *valid, u32 *tsize, unsigned long *epn, #endif } -#ifndef CONFIG_NAND_SPL void print_tlbcam(void) { int i; diff --git a/arch/powerpc/cpu/mpc86xx/config.mk b/arch/powerpc/cpu/mpc86xx/config.mk index ca2f837..92ff7bf 100644 --- a/arch/powerpc/cpu/mpc86xx/config.mk +++ b/arch/powerpc/cpu/mpc86xx/config.mk @@ -21,7 +21,7 @@ # MA 02111-1307 USA # -PLATFORM_RELFLAGS += -fPIC -meabi +PLATFORM_RELFLAGS += -meabi PLATFORM_CPPFLAGS += -ffixed-r2 -mstring PLATFORM_CPPFLAGS += -maltivec -mabi=altivec -msoft-float diff --git a/arch/powerpc/cpu/mpc8xx/config.mk b/arch/powerpc/cpu/mpc8xx/config.mk index f5e08a5..aa61980 100644 --- a/arch/powerpc/cpu/mpc8xx/config.mk +++ b/arch/powerpc/cpu/mpc8xx/config.mk @@ -21,6 +21,6 @@ # MA 02111-1307 USA # -PLATFORM_RELFLAGS += -fPIC -meabi +PLATFORM_RELFLAGS += -meabi PLATFORM_CPPFLAGS += -DCONFIG_8xx -ffixed-r2 -mstring -mcpu=860 -msoft-float diff --git a/arch/powerpc/cpu/mpc8xxx/Makefile b/arch/powerpc/cpu/mpc8xxx/Makefile index 5dfd65b..4ae26e4 100644 --- a/arch/powerpc/cpu/mpc8xxx/Makefile +++ b/arch/powerpc/cpu/mpc8xxx/Makefile @@ -15,6 +15,7 @@ COBJS-y += cpu.o endif COBJS-$(CONFIG_OF_LIBFDT) += fdt.o +COBJS-$(CONFIG_FSL_IFC) += fsl_ifc.o COBJS-$(CONFIG_FSL_LBC) += fsl_lbc.o COBJS-$(CONFIG_SYS_SRIO) += srio.o diff --git a/arch/powerpc/cpu/mpc8xxx/cpu.c b/arch/powerpc/cpu/mpc8xxx/cpu.c index 4335fb4..39b304a 100644 --- a/arch/powerpc/cpu/mpc8xxx/cpu.c +++ b/arch/powerpc/cpu/mpc8xxx/cpu.c @@ -71,15 +71,27 @@ struct cpu_type cpu_type_list [] = { CPU_TYPE_ENTRY(P1012, P1012, 1), CPU_TYPE_ENTRY(P1012, P1012_E, 1), CPU_TYPE_ENTRY(P1013, P1013, 1), + CPU_TYPE_ENTRY(P1013, P1013_E, 1), CPU_TYPE_ENTRY(P1014, P1014_E, 1), CPU_TYPE_ENTRY(P1014, P1014, 1), - CPU_TYPE_ENTRY(P1013, P1013_E, 1), + CPU_TYPE_ENTRY(P1015, P1015_E, 1), + CPU_TYPE_ENTRY(P1015, P1015, 1), + CPU_TYPE_ENTRY(P1016, P1016_E, 1), + CPU_TYPE_ENTRY(P1016, P1016, 1), + CPU_TYPE_ENTRY(P1017, P1017, 1), + CPU_TYPE_ENTRY(P1017, P1017, 1), CPU_TYPE_ENTRY(P1020, P1020, 2), CPU_TYPE_ENTRY(P1020, P1020_E, 2), CPU_TYPE_ENTRY(P1021, P1021, 2), CPU_TYPE_ENTRY(P1021, P1021_E, 2), CPU_TYPE_ENTRY(P1022, P1022, 2), CPU_TYPE_ENTRY(P1022, P1022_E, 2), + CPU_TYPE_ENTRY(P1023, P1023, 2), + CPU_TYPE_ENTRY(P1023, P1023_E, 2), + CPU_TYPE_ENTRY(P1024, P1024, 2), + CPU_TYPE_ENTRY(P1024, P1024_E, 2), + CPU_TYPE_ENTRY(P1025, P1025, 2), + CPU_TYPE_ENTRY(P1025, P1025_E, 2), CPU_TYPE_ENTRY(P2010, P2010, 1), CPU_TYPE_ENTRY(P2010, P2010_E, 1), CPU_TYPE_ENTRY(P2020, P2020, 2), diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c index cefabe7..02d069c 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c @@ -236,7 +236,7 @@ static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr, * tAXPD=1, need design to confirm. */ int tXP = max((get_memory_clk_period_ps() * 3), 7500); /* unit=ps */ - unsigned int data_rate = fsl_ddr_get_mem_data_rate(); + unsigned int data_rate = get_ddr_freq(0); tmrd_mclk = 4; /* set the turnaround time */ trwt_mclk = 1; @@ -1305,7 +1305,7 @@ static void set_ddr_eor(fsl_ddr_cfg_regs_t *ddr, const memctl_options_t *popts) { if (popts->addr_hash) { ddr->ddr_eor = 0x40000000; /* address hash enable */ - puts("Addess hashing enabled.\n"); + puts("Address hashing enabled.\n"); } } diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ddr.h b/arch/powerpc/cpu/mpc8xxx/ddr/ddr.h index c7c12c1..1e866fe 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/ddr.h +++ b/arch/powerpc/cpu/mpc8xxx/ddr/ddr.h @@ -80,5 +80,4 @@ extern void check_interleaving_options(fsl_ddr_info_t *pinfo); extern unsigned int mclk_to_picos(unsigned int mclk); extern unsigned int get_memory_clk_period_ps(void); extern unsigned int picos_to_mclk(unsigned int picos); -extern unsigned int fsl_ddr_get_mem_data_rate(void); #endif diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ddr2_dimm_params.c b/arch/powerpc/cpu/mpc8xxx/ddr/ddr2_dimm_params.c index dcb37ce..b565e33 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/ddr2_dimm_params.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/ddr2_dimm_params.c @@ -250,24 +250,27 @@ ddr_compute_dimm_parameters(const ddr2_spd_eeprom_t *spd, pdimm->primary_sdram_width = spd->primw; pdimm->ec_sdram_width = spd->ecw; - /* FIXME: what about registered SO-DIMM? */ + /* These are all the types defined by the JEDEC DDR2 SPD 1.3 spec */ switch (spd->dimm_type) { - case 0x01: /* RDIMM */ - case 0x10: /* Mini-RDIMM */ - pdimm->registered_dimm = 1; /* register buffered */ + case DDR2_SPD_DIMMTYPE_RDIMM: + case DDR2_SPD_DIMMTYPE_72B_SO_RDIMM: + case DDR2_SPD_DIMMTYPE_MINI_RDIMM: + /* Registered/buffered DIMMs */ + pdimm->registered_dimm = 1; break; - case 0x02: /* UDIMM */ - case 0x04: /* SO-DIMM */ - case 0x08: /* Micro-DIMM */ - case 0x20: /* Mini-UDIMM */ - pdimm->registered_dimm = 0; /* unbuffered */ + case DDR2_SPD_DIMMTYPE_UDIMM: + case DDR2_SPD_DIMMTYPE_SO_DIMM: + case DDR2_SPD_DIMMTYPE_MICRO_DIMM: + case DDR2_SPD_DIMMTYPE_MINI_UDIMM: + /* Unbuffered DIMMs */ + pdimm->registered_dimm = 0; break; + case DDR2_SPD_DIMMTYPE_72B_SO_CDIMM: default: printf("unknown dimm_type 0x%02X\n", spd->dimm_type); return 1; - break; } /* SDRAM device parameters */ diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c b/arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c index 29cea53..756b15f 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c @@ -128,24 +128,32 @@ ddr_compute_dimm_parameters(const ddr3_spd_eeprom_t *spd, pdimm->data_width = pdimm->primary_sdram_width + pdimm->ec_sdram_width; - switch (spd->module_type & 0xf) { - case 0x01: /* RDIMM */ - case 0x05: /* Mini-RDIMM */ - pdimm->registered_dimm = 1; /* register buffered */ + /* These are the types defined by the JEDEC DDR3 SPD spec */ + pdimm->mirrored_dimm = 0; + pdimm->registered_dimm = 0; + switch (spd->module_type & DDR3_SPD_MODULETYPE_MASK) { + case DDR3_SPD_MODULETYPE_RDIMM: + case DDR3_SPD_MODULETYPE_MINI_RDIMM: + /* Registered/buffered DIMMs */ + pdimm->registered_dimm = 1; for (i = 0; i < 16; i += 2) { - pdimm->rcw[i] = spd->mod_section.registered.rcw[i/2] & 0x0F; - pdimm->rcw[i+1] = (spd->mod_section.registered.rcw[i/2] >> 4) & 0x0F; + u8 rcw = spd->mod_section.registered.rcw[i/2]; + pdimm->rcw[i] = (rcw >> 0) & 0x0F; + pdimm->rcw[i+1] = (rcw >> 4) & 0x0F; } break; - case 0x02: /* UDIMM */ - case 0x03: /* SO-DIMM */ - case 0x04: /* Micro-DIMM */ - case 0x06: /* Mini-UDIMM */ - pdimm->registered_dimm = 0; /* unbuffered */ + + case DDR3_SPD_MODULETYPE_UDIMM: + case DDR3_SPD_MODULETYPE_SO_DIMM: + case DDR3_SPD_MODULETYPE_MICRO_DIMM: + case DDR3_SPD_MODULETYPE_MINI_UDIMM: + /* Unbuffered DIMMs */ + if (spd->mod_section.unbuffered.addr_mapping & 0x1) + pdimm->mirrored_dimm = 1; break; default: - printf("unknown dimm_type 0x%02X\n", spd->module_type); + printf("unknown module_type 0x%02X\n", spd->module_type); return 1; } @@ -303,16 +311,5 @@ ddr_compute_dimm_parameters(const ddr3_spd_eeprom_t *spd, pdimm->tFAW_ps = (((spd->tFAW_msb & 0xf) << 8) | spd->tFAW_min) * mtb_ps; - /* - * We need check the address mirror for unbuffered DIMM - * If SPD indicate the address map mirror, The DDR controller - * need care it. - */ - if ((spd->module_type == SPD_MODULETYPE_UDIMM) || - (spd->module_type == SPD_MODULETYPE_SODIMM) || - (spd->module_type == SPD_MODULETYPE_MICRODIMM) || - (spd->module_type == SPD_MODULETYPE_MINIUDIMM)) - pdimm->mirrored_dimm = spd->mod_section.unbuffered.addr_mapping & 0x1; - return 0; } diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c b/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c index 8b31ec0..00f3d6c 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c @@ -207,10 +207,15 @@ compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params, temp1 = temp2 = 0; for (i = 0; i < number_of_dimms; i++) { if (dimm_params[i].n_ranks) { - if (dimm_params[i].registered_dimm) + if (dimm_params[i].registered_dimm) { temp1 = 1; - if (!dimm_params[i].registered_dimm) + printf("Detected RDIMM %s\n", + dimm_params[i].mpart); + } else { temp2 = 1; + printf("Detected UDIMM %s\n", + dimm_params[i].mpart); + } } } @@ -218,10 +223,8 @@ compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params, outpdimm->all_DIMMs_unbuffered = 0; if (temp1 && !temp2) { outpdimm->all_DIMMs_registered = 1; - printf("Detected RDIMM(s)\n"); } else if (!temp1 && temp2) { outpdimm->all_DIMMs_unbuffered = 1; - printf("Detected UDIMM(s)\n"); } else { printf("ERROR: Mix of registered buffered and unbuffered " "DIMMs detected!\n"); diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/main.c b/arch/powerpc/cpu/mpc8xxx/ddr/main.c index bb96d66..c8fa123 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/main.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/main.c @@ -13,6 +13,7 @@ */ #include <common.h> +#include <i2c.h> #include <asm/fsl_ddr_sdram.h> #include "ddr.h" @@ -26,9 +27,65 @@ extern void fsl_ddr_set_lawbar( extern void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, unsigned int ctrl_num); -/* Board-specific functions defined in each board's ddr.c */ -extern void fsl_ddr_get_spd(generic_spd_eeprom_t *ctrl_dimms_spd, - unsigned int ctrl_num); +#if defined(SPD_EEPROM_ADDRESS) || \ + defined(SPD_EEPROM_ADDRESS1) || defined(SPD_EEPROM_ADDRESS2) || \ + defined(SPD_EEPROM_ADDRESS3) || defined(SPD_EEPROM_ADDRESS4) +#if (CONFIG_NUM_DDR_CONTROLLERS == 1) && (CONFIG_DIMM_SLOTS_PER_CTLR == 1) +u8 spd_i2c_addr[CONFIG_NUM_DDR_CONTROLLERS][CONFIG_DIMM_SLOTS_PER_CTLR] = { + [0][0] = SPD_EEPROM_ADDRESS, +}; +#endif +#if (CONFIG_NUM_DDR_CONTROLLERS == 2) && (CONFIG_DIMM_SLOTS_PER_CTLR == 1) +u8 spd_i2c_addr[CONFIG_NUM_DDR_CONTROLLERS][CONFIG_DIMM_SLOTS_PER_CTLR] = { + [0][0] = SPD_EEPROM_ADDRESS1, /* controller 1 */ + [1][0] = SPD_EEPROM_ADDRESS2, /* controller 2 */ +}; +#endif +#if (CONFIG_NUM_DDR_CONTROLLERS == 2) && (CONFIG_DIMM_SLOTS_PER_CTLR == 2) +u8 spd_i2c_addr[CONFIG_NUM_DDR_CONTROLLERS][CONFIG_DIMM_SLOTS_PER_CTLR] = { + [0][0] = SPD_EEPROM_ADDRESS1, /* controller 1 */ + [0][1] = SPD_EEPROM_ADDRESS2, /* controller 1 */ + [1][0] = SPD_EEPROM_ADDRESS3, /* controller 2 */ + [1][1] = SPD_EEPROM_ADDRESS4, /* controller 2 */ +}; +#endif + +static void __get_spd(generic_spd_eeprom_t *spd, u8 i2c_address) +{ + int ret = i2c_read(i2c_address, 0, 1, (uchar *)spd, + sizeof(generic_spd_eeprom_t)); + + if (ret) { + printf("DDR: failed to read SPD from address %u\n", i2c_address); + memset(spd, 0, sizeof(generic_spd_eeprom_t)); + } +} + +__attribute__((weak, alias("__get_spd"))) +void get_spd(generic_spd_eeprom_t *spd, u8 i2c_address); + +void fsl_ddr_get_spd(generic_spd_eeprom_t *ctrl_dimms_spd, + unsigned int ctrl_num) +{ + unsigned int i; + unsigned int i2c_address = 0; + + if (ctrl_num >= CONFIG_NUM_DDR_CONTROLLERS) { + printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num); + return; + } + + for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) { + i2c_address = spd_i2c_addr[ctrl_num][i]; + get_spd(&(ctrl_dimms_spd[i]), i2c_address); + } +} +#else +void fsl_ddr_get_spd(generic_spd_eeprom_t *ctrl_dimms_spd, + unsigned int ctrl_num) +{ +} +#endif /* SPD_EEPROM_ADDRESSx */ /* * ASSUMPTIONS: diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/util.c b/arch/powerpc/cpu/mpc8xxx/ddr/util.c index 1e2d921..104d360 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/util.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/util.c @@ -1,5 +1,5 @@ /* - * Copyright 2008 Freescale Semiconductor, Inc. + * Copyright 2008-2011 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -8,10 +8,16 @@ #include <common.h> #include <asm/fsl_law.h> +#include <div64.h> #include "ddr.h" -unsigned int fsl_ddr_get_mem_data_rate(void); +/* To avoid 64-bit full-divides, we factor this here */ +#define ULL_2E12 2000000000000ULL +#define UL_5POW12 244140625UL +#define UL_2POW13 (1UL << 13) + +#define ULL_8FS 0xFFFFFFFFULL /* * Round mclk_ps to nearest 10 ps in memory controller code. @@ -22,35 +28,51 @@ unsigned int fsl_ddr_get_mem_data_rate(void); */ unsigned int get_memory_clk_period_ps(void) { - unsigned int mclk_ps; + unsigned int data_rate = get_ddr_freq(0); + unsigned int result; + + /* Round to nearest 10ps, being careful about 64-bit multiply/divide */ + unsigned long long mclk_ps = ULL_2E12; + + /* Add 5*data_rate, for rounding */ + mclk_ps += 5*(unsigned long long)data_rate; - mclk_ps = 2000000000000ULL / fsl_ddr_get_mem_data_rate(); - /* round to nearest 10 ps */ - return 10 * ((mclk_ps + 5) / 10); + /* Now perform the big divide, the result fits in 32-bits */ + do_div(mclk_ps, data_rate); + result = mclk_ps; + + /* We still need to round to 10ps */ + return 10 * (result/10); } /* Convert picoseconds into DRAM clock cycles (rounding up if needed). */ unsigned int picos_to_mclk(unsigned int picos) { - const unsigned long long ULL_2e12 = 2000000000000ULL; - const unsigned long long ULL_8Fs = 0xFFFFFFFFULL; - unsigned long long clks; - unsigned long long clks_temp; + unsigned long long clks, clks_rem; + /* Short circuit for zero picos */ if (!picos) return 0; - clks = fsl_ddr_get_mem_data_rate() * (unsigned long long) picos; - clks_temp = clks; - clks = clks / ULL_2e12; - if (clks_temp % ULL_2e12) { - clks++; - } + /* First multiply the time by the data rate (32x32 => 64) */ + clks = picos * (unsigned long long)get_ddr_freq(0); - if (clks > ULL_8Fs) { - clks = ULL_8Fs; - } + /* + * Now divide by 5^12 and track the 32-bit remainder, then divide + * by 2*(2^12) using shifts (and updating the remainder). + */ + clks_rem = do_div(clks, UL_5POW12); + clks_rem <<= 13; + clks_rem |= clks & (UL_2POW13-1); + clks >>= 13; + + /* If we had a remainder, then round up */ + if (clks_rem) + clks++; + /* Clamp to the maximum representable value */ + if (clks > ULL_8FS) + clks = ULL_8FS; return (unsigned int) clks; } @@ -141,6 +163,8 @@ void board_add_ram_info(int use_default) if (sdram_cfg & SDRAM_CFG_32_BE) puts(", 32-bit"); + else if (sdram_cfg & SDRAM_CFG_16_BE) + puts(", 16-bit"); else puts(", 64-bit"); diff --git a/arch/powerpc/cpu/mpc8xxx/fdt.c b/arch/powerpc/cpu/mpc8xxx/fdt.c index 0c166fd..520cb90 100644 --- a/arch/powerpc/cpu/mpc8xxx/fdt.c +++ b/arch/powerpc/cpu/mpc8xxx/fdt.c @@ -27,8 +27,8 @@ #include <libfdt.h> #include <fdt_support.h> #include <asm/mp.h> -#include <asm/fsl_enet.h> #include <asm/fsl_serdes.h> +#include <phy.h> #if defined(CONFIG_MP) && (defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)) static int ft_del_cpuhandle(void *blob, int cpuhandle) @@ -218,27 +218,10 @@ void fdt_fixup_crypto_node(void *blob, int sec_rev) } #endif -int fdt_fixup_phy_connection(void *blob, int offset, enum fsl_phy_enet_if phyc) +int fdt_fixup_phy_connection(void *blob, int offset, phy_interface_t phyc) { - static const char *fsl_phy_enet_if_str[] = { - [MII] = "mii", - [RMII] = "rmii", - [GMII] = "gmii", - [RGMII] = "rgmii", - [RGMII_ID] = "rgmii-id", - [RGMII_RXID] = "rgmii-rxid", - [SGMII] = "sgmii", - [TBI] = "tbi", - [RTBI] = "rtbi", - [XAUI] = "xgmii", - [FSL_ETH_IF_NONE] = "", - }; - - if (phyc > ARRAY_SIZE(fsl_phy_enet_if_str)) - return fdt_setprop_string(blob, offset, "phy-connection-type", ""); - return fdt_setprop_string(blob, offset, "phy-connection-type", - fsl_phy_enet_if_str[phyc]); + phy_string_for_interface(phyc)); } #ifdef CONFIG_SYS_SRIO diff --git a/arch/powerpc/cpu/mpc8xxx/fsl_ifc.c b/arch/powerpc/cpu/mpc8xxx/fsl_ifc.c new file mode 100644 index 0000000..e794821 --- /dev/null +++ b/arch/powerpc/cpu/mpc8xxx/fsl_ifc.c @@ -0,0 +1,83 @@ +/* + * Copyright 2010-2011 Freescale Semiconductor, Inc. + * Author: Dipen Dudhat <dipen.dudhat@freescale.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/fsl_ifc.h> + +void print_ifc_regs(void) +{ + int i, j; + + printf("IFC Controller Registers\n"); + for (i = 0; i < FSL_IFC_BANK_COUNT; i++) { + printf("CSPR%d:0x%08X\tAMASK%d:0x%08X\tCSOR%d:0x%08X\n", + i, get_ifc_cspr(i), i, get_ifc_amask(i), + i, get_ifc_csor(i)); + for (j = 0; j < 4; j++) + printf("IFC_FTIM%d:0x%08X\n", j, get_ifc_ftim(i, j)); + } +} + +void init_early_memctl_regs(void) +{ +#if defined(CONFIG_SYS_CSPR0) && defined(CONFIG_SYS_CSOR0) + set_ifc_ftim(IFC_CS0, IFC_FTIM0, CONFIG_SYS_CS0_FTIM0); + set_ifc_ftim(IFC_CS0, IFC_FTIM1, CONFIG_SYS_CS0_FTIM1); + set_ifc_ftim(IFC_CS0, IFC_FTIM2, CONFIG_SYS_CS0_FTIM2); + set_ifc_ftim(IFC_CS0, IFC_FTIM3, CONFIG_SYS_CS0_FTIM3); + + set_ifc_cspr(IFC_CS0, CONFIG_SYS_CSPR0); + set_ifc_amask(IFC_CS0, CONFIG_SYS_AMASK0); + set_ifc_csor(IFC_CS0, CONFIG_SYS_CSOR0); +#endif + +#if defined(CONFIG_SYS_CSPR1) && defined(CONFIG_SYS_CSOR1) + set_ifc_ftim(IFC_CS1, IFC_FTIM0, CONFIG_SYS_CS1_FTIM0); + set_ifc_ftim(IFC_CS1, IFC_FTIM1, CONFIG_SYS_CS1_FTIM1); + set_ifc_ftim(IFC_CS1, IFC_FTIM2, CONFIG_SYS_CS1_FTIM2); + set_ifc_ftim(IFC_CS1, IFC_FTIM3, CONFIG_SYS_CS1_FTIM3); + + set_ifc_csor(IFC_CS1, CONFIG_SYS_CSOR1); + set_ifc_amask(IFC_CS1, CONFIG_SYS_AMASK1); + set_ifc_cspr(IFC_CS1, CONFIG_SYS_CSPR1); +#endif + +#if defined(CONFIG_SYS_CSPR2) && defined(CONFIG_SYS_CSOR2) + set_ifc_ftim(IFC_CS2, IFC_FTIM0, CONFIG_SYS_CS2_FTIM0); + set_ifc_ftim(IFC_CS2, IFC_FTIM1, CONFIG_SYS_CS2_FTIM1); + set_ifc_ftim(IFC_CS2, IFC_FTIM2, CONFIG_SYS_CS2_FTIM2); + set_ifc_ftim(IFC_CS2, IFC_FTIM3, CONFIG_SYS_CS2_FTIM3); + + set_ifc_csor(IFC_CS2, CONFIG_SYS_CSOR2); + set_ifc_amask(IFC_CS2, CONFIG_SYS_AMASK2); + set_ifc_cspr(IFC_CS2, CONFIG_SYS_CSPR2); +#endif + +#if defined(CONFIG_SYS_CSPR3) && defined(CONFIG_SYS_CSOR3) + set_ifc_ftim(IFC_CS3, IFC_FTIM0, CONFIG_SYS_CS3_FTIM0); + set_ifc_ftim(IFC_CS3, IFC_FTIM1, CONFIG_SYS_CS3_FTIM1); + set_ifc_ftim(IFC_CS3, IFC_FTIM2, CONFIG_SYS_CS3_FTIM2); + set_ifc_ftim(IFC_CS3, IFC_FTIM3, CONFIG_SYS_CS3_FTIM3); + + set_ifc_cspr(IFC_CS3, CONFIG_SYS_CSPR3); + set_ifc_amask(IFC_CS3, CONFIG_SYS_AMASK3); + set_ifc_csor(IFC_CS3, CONFIG_SYS_CSOR3); +#endif +} diff --git a/arch/powerpc/cpu/ppc4xx/config.mk b/arch/powerpc/cpu/ppc4xx/config.mk index d862bb4..f5cbbbd 100644 --- a/arch/powerpc/cpu/ppc4xx/config.mk +++ b/arch/powerpc/cpu/ppc4xx/config.mk @@ -21,7 +21,7 @@ # MA 02111-1307 USA # -PLATFORM_RELFLAGS += -fPIC -meabi +PLATFORM_RELFLAGS += -meabi PLATFORM_CPPFLAGS += -DCONFIG_4xx -ffixed-r2 -mstring -msoft-float cfg=$(shell grep configs $(OBJTREE)/include/config.h | sed 's/.*<\(configs.*\)>/\1/') diff --git a/arch/powerpc/include/asm/config.h b/arch/powerpc/include/asm/config.h index 2b6b233..9aad9be 100644 --- a/arch/powerpc/include/asm/config.h +++ b/arch/powerpc/include/asm/config.h @@ -29,6 +29,13 @@ #include <asm/config_mpc86xx.h> #endif +/* CONFIG_HARD_SPI triggers SPI bus initialization in PowerPC */ +#if defined(CONFIG_MPC8XXX_SPI) || defined(CONFIG_FSL_ESPI) +# ifndef CONFIG_HARD_SPI +# define CONFIG_HARD_SPI +# endif +#endif + #define CONFIG_LMB #define CONFIG_SYS_BOOT_RAMDISK_HIGH #define CONFIG_SYS_BOOT_GET_CMDLINE @@ -75,8 +82,19 @@ /* Since so many PPC SOCs have a semi-common LBC, define this here */ #if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) || \ defined(CONFIG_MPC83xx) +#if !defined(CONFIG_FSL_IFC) #define CONFIG_FSL_LBC #endif +#endif + +/* The TSEC driver uses the PHYLIB infrastructure */ +#ifndef CONFIG_PHYLIB +#if defined(CONFIG_TSEC_ENET) +#define CONFIG_PHYLIB + +#include <config_phylib_all_drivers.h> +#endif /* TSEC_ENET */ +#endif /* !CONFIG_PHYLIB */ /* All PPC boards must swap IDE bytes */ #define CONFIG_IDE_SWAP_IO diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h index 6c16681..41c2d20 100644 --- a/arch/powerpc/include/asm/config_mpc85xx.h +++ b/arch/powerpc/include/asm/config_mpc85xx.h @@ -67,11 +67,17 @@ #define CONFIG_MAX_CPUS 1 #define CONFIG_SYS_FSL_NUM_LAWS 10 #define CONFIG_SYS_FSL_SEC_COMPAT 2 +#define QE_MURAM_SIZE 0x10000UL +#define MAX_QE_RISC 2 +#define QE_NUM_OF_SNUM 28 #elif defined(CONFIG_MPC8569) #define CONFIG_MAX_CPUS 1 #define CONFIG_SYS_FSL_NUM_LAWS 10 #define CONFIG_SYS_FSL_SEC_COMPAT 2 +#define QE_MURAM_SIZE 0x20000UL +#define MAX_QE_RISC 4 +#define QE_NUM_OF_SNUM 46 #elif defined(CONFIG_MPC8572) #define CONFIG_MAX_CPUS 2 @@ -82,24 +88,39 @@ #elif defined(CONFIG_P1010) #define CONFIG_MAX_CPUS 1 +#define CONFIG_FSL_SDHC_V2_3 #define CONFIG_SYS_FSL_NUM_LAWS 12 #define CONFIG_TSECV2 #define CONFIG_SYS_FSL_SEC_COMPAT 4 +#define CONFIG_FSL_SATA_V2 +#define CONFIG_SYS_FSL_ERRATUM_ESDHC111 +#define CONFIG_NUM_DDR_CONTROLLERS 1 +#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 +/* P1011 is single core version of P1020 */ #elif defined(CONFIG_P1011) #define CONFIG_MAX_CPUS 1 #define CONFIG_SYS_FSL_NUM_LAWS 12 #define CONFIG_TSECV2 #define CONFIG_FSL_PCIE_DISABLE_ASPM #define CONFIG_SYS_FSL_SEC_COMPAT 2 +#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001 +#define CONFIG_SYS_FSL_ERRATUM_ESDHC111 +/* P1012 is single core version of P1021 */ #elif defined(CONFIG_P1012) #define CONFIG_MAX_CPUS 1 #define CONFIG_SYS_FSL_NUM_LAWS 12 #define CONFIG_TSECV2 #define CONFIG_FSL_PCIE_DISABLE_ASPM #define CONFIG_SYS_FSL_SEC_COMPAT 2 +#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001 +#define CONFIG_SYS_FSL_ERRATUM_ESDHC111 +#define QE_MURAM_SIZE 0x6000UL +#define MAX_QE_RISC 1 +#define QE_NUM_OF_SNUM 28 +/* P1013 is single core version of P1022 */ #elif defined(CONFIG_P1013) #define CONFIG_MAX_CPUS 1 #define CONFIG_SYS_FSL_NUM_LAWS 12 @@ -111,9 +132,49 @@ #elif defined(CONFIG_P1014) #define CONFIG_MAX_CPUS 1 +#define CONFIG_FSL_SDHC_V2_3 #define CONFIG_SYS_FSL_NUM_LAWS 12 #define CONFIG_TSECV2 #define CONFIG_SYS_FSL_SEC_COMPAT 4 +#define CONFIG_FSL_SATA_V2 +#define CONFIG_SYS_FSL_ERRATUM_ESDHC111 +#define CONFIG_NUM_DDR_CONTROLLERS 1 +#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 + +/* P1015 is single core version of P1024 */ +#elif defined(CONFIG_P1015) +#define CONFIG_MAX_CPUS 1 +#define CONFIG_SYS_FSL_NUM_LAWS 12 +#define CONFIG_TSECV2 +#define CONFIG_FSL_PCIE_DISABLE_ASPM +#define CONFIG_SYS_FSL_SEC_COMPAT 2 +#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001 +#define CONFIG_SYS_FSL_ERRATUM_ESDHC111 + +/* P1016 is single core version of P1025 */ +#elif defined(CONFIG_P1016) +#define CONFIG_MAX_CPUS 1 +#define CONFIG_SYS_FSL_NUM_LAWS 12 +#define CONFIG_TSECV2 +#define CONFIG_FSL_PCIE_DISABLE_ASPM +#define CONFIG_SYS_FSL_SEC_COMPAT 2 +#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001 +#define CONFIG_SYS_FSL_ERRATUM_ESDHC111 +#define QE_MURAM_SIZE 0x6000UL +#define MAX_QE_RISC 1 +#define QE_NUM_OF_SNUM 28 + +/* P1017 is single core version of P1023 */ +#elif defined(CONFIG_P1017) +#define CONFIG_MAX_CPUS 1 +#define CONFIG_SYS_FSL_NUM_LAWS 12 +#define CONFIG_SYS_FSL_SEC_COMPAT 4 +#define CONFIG_SYS_NUM_FMAN 1 +#define CONFIG_SYS_NUM_FM1_DTSEC 2 +#define CONFIG_NUM_DDR_CONTROLLERS 1 +#define CONFIG_SYS_QMAN_NUM_PORTALS 3 +#define CONFIG_SYS_BMAN_NUM_PORTALS 3 +#define CONFIG_SYS_FM_MURAM_SIZE 0x10000 #elif defined(CONFIG_P1020) #define CONFIG_MAX_CPUS 2 @@ -121,6 +182,8 @@ #define CONFIG_TSECV2 #define CONFIG_FSL_PCIE_DISABLE_ASPM #define CONFIG_SYS_FSL_SEC_COMPAT 2 +#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001 +#define CONFIG_SYS_FSL_ERRATUM_ESDHC111 #elif defined(CONFIG_P1021) #define CONFIG_MAX_CPUS 2 @@ -128,6 +191,11 @@ #define CONFIG_TSECV2 #define CONFIG_FSL_PCIE_DISABLE_ASPM #define CONFIG_SYS_FSL_SEC_COMPAT 2 +#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001 +#define CONFIG_SYS_FSL_ERRATUM_ESDHC111 +#define QE_MURAM_SIZE 0x6000UL +#define MAX_QE_RISC 1 +#define QE_NUM_OF_SNUM 28 #elif defined(CONFIG_P1022) #define CONFIG_MAX_CPUS 2 @@ -138,6 +206,41 @@ #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 #define CONFIG_FSL_SATA_ERRATUM_A001 +#elif defined(CONFIG_P1023) +#define CONFIG_MAX_CPUS 2 +#define CONFIG_SYS_FSL_NUM_LAWS 12 +#define CONFIG_SYS_FSL_SEC_COMPAT 4 +#define CONFIG_SYS_NUM_FMAN 1 +#define CONFIG_SYS_NUM_FM1_DTSEC 2 +#define CONFIG_NUM_DDR_CONTROLLERS 1 +#define CONFIG_SYS_QMAN_NUM_PORTALS 3 +#define CONFIG_SYS_BMAN_NUM_PORTALS 3 +#define CONFIG_SYS_FM_MURAM_SIZE 0x10000 + +/* P1024 is lower end variant of P1020 */ +#elif defined(CONFIG_P1024) +#define CONFIG_MAX_CPUS 2 +#define CONFIG_SYS_FSL_NUM_LAWS 12 +#define CONFIG_TSECV2 +#define CONFIG_FSL_PCIE_DISABLE_ASPM +#define CONFIG_SYS_FSL_SEC_COMPAT 2 +#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001 +#define CONFIG_SYS_FSL_ERRATUM_ESDHC111 + +/* P1025 is lower end variant of P1021 */ +#elif defined(CONFIG_P1025) +#define CONFIG_MAX_CPUS 2 +#define CONFIG_SYS_FSL_NUM_LAWS 12 +#define CONFIG_TSECV2 +#define CONFIG_FSL_PCIE_DISABLE_ASPM +#define CONFIG_SYS_FSL_SEC_COMPAT 2 +#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001 +#define CONFIG_SYS_FSL_ERRATUM_ESDHC111 +#define QE_MURAM_SIZE 0x6000UL +#define MAX_QE_RISC 1 +#define QE_NUM_OF_SNUM 28 + +/* P2010 is single core version of P2020 */ #elif defined(CONFIG_P2010) #define CONFIG_MAX_CPUS 1 #define CONFIG_SYS_FSL_NUM_LAWS 12 @@ -154,21 +257,44 @@ #elif defined(CONFIG_PPC_P2040) #define CONFIG_MAX_CPUS 4 +#define CONFIG_SYS_FSL_NUM_CC_PLLS 2 #define CONFIG_SYS_FSL_NUM_LAWS 32 #define CONFIG_SYS_FSL_SEC_COMPAT 4 +#define CONFIG_SYS_NUM_FMAN 1 +#define CONFIG_SYS_NUM_FM1_DTSEC 5 +#define CONFIG_NUM_DDR_CONTROLLERS 1 +#define CONFIG_SYS_FM_MURAM_SIZE 0x28000 +#define CONFIG_SYS_FSL_TBCLK_DIV 32 +#define CONFIG_SYS_FSL_USB1_PHY_ENABLE +#define CONFIG_SYS_FSL_USB2_PHY_ENABLE +#define CONFIG_SYS_FSL_ERRATUM_ESDHC111 #elif defined(CONFIG_PPC_P3041) #define CONFIG_MAX_CPUS 4 +#define CONFIG_SYS_FSL_NUM_CC_PLLS 2 #define CONFIG_SYS_FSL_NUM_LAWS 32 #define CONFIG_SYS_FSL_SEC_COMPAT 4 +#define CONFIG_SYS_NUM_FMAN 1 +#define CONFIG_SYS_NUM_FM1_DTSEC 5 +#define CONFIG_SYS_NUM_FM1_10GEC 1 +#define CONFIG_NUM_DDR_CONTROLLERS 1 +#define CONFIG_SYS_FM_MURAM_SIZE 0x28000 +#define CONFIG_SYS_FSL_TBCLK_DIV 32 +#define CONFIG_SYS_FSL_USB1_PHY_ENABLE +#define CONFIG_SYS_FSL_USB2_PHY_ENABLE +#define CONFIG_SYS_FSL_ERRATUM_ESDHC111 #elif defined(CONFIG_PPC_P4040) #define CONFIG_MAX_CPUS 4 +#define CONFIG_SYS_FSL_NUM_CC_PLLS 4 #define CONFIG_SYS_FSL_NUM_LAWS 32 #define CONFIG_SYS_FSL_SEC_COMPAT 4 +#define CONFIG_SYS_FM_MURAM_SIZE 0x28000 +#define CONFIG_SYS_FSL_TBCLK_DIV 16 #elif defined(CONFIG_PPC_P4080) #define CONFIG_MAX_CPUS 8 +#define CONFIG_SYS_FSL_NUM_CC_PLLS 4 #define CONFIG_SYS_FSL_NUM_LAWS 32 #define CONFIG_SYS_FSL_SEC_COMPAT 4 #define CONFIG_SYS_NUM_FMAN 2 @@ -177,6 +303,8 @@ #define CONFIG_SYS_NUM_FM1_10GEC 1 #define CONFIG_SYS_NUM_FM2_10GEC 1 #define CONFIG_NUM_DDR_CONTROLLERS 2 +#define CONFIG_SYS_FM_MURAM_SIZE 0x28000 +#define CONFIG_SYS_FSL_TBCLK_DIV 16 #define CONFIG_SYS_FSL_ERRATUM_CPC_A002 #define CONFIG_SYS_FSL_ERRATUM_CPC_A003 #define CONFIG_SYS_FSL_ERRATUM_DDR_A003 @@ -186,16 +314,40 @@ #define CONFIG_SYS_FSL_ERRATUM_ESDHC136 #define CONFIG_SYS_P4080_ERRATUM_CPU22 #define CONFIG_SYS_P4080_ERRATUM_SERDES8 +#define CONFIG_SYS_P4080_ERRATUM_SERDES9 +#define CONFIG_SYS_P4080_ERRATUM_SERDES_A001 +#define CONFIG_SYS_P4080_ERRATUM_SERDES_A005 +/* P5010 is single core version of P5020 */ #elif defined(CONFIG_PPC_P5010) #define CONFIG_MAX_CPUS 1 +#define CONFIG_SYS_FSL_NUM_CC_PLLS 2 #define CONFIG_SYS_FSL_NUM_LAWS 32 #define CONFIG_SYS_FSL_SEC_COMPAT 4 +#define CONFIG_SYS_NUM_FMAN 1 +#define CONFIG_SYS_NUM_FM1_DTSEC 5 +#define CONFIG_SYS_NUM_FM1_10GEC 1 +#define CONFIG_NUM_DDR_CONTROLLERS 1 +#define CONFIG_SYS_FM_MURAM_SIZE 0x28000 +#define CONFIG_SYS_FSL_TBCLK_DIV 32 +#define CONFIG_SYS_FSL_USB1_PHY_ENABLE +#define CONFIG_SYS_FSL_USB2_PHY_ENABLE +#define CONFIG_SYS_FSL_ERRATUM_ESDHC111 #elif defined(CONFIG_PPC_P5020) #define CONFIG_MAX_CPUS 2 +#define CONFIG_SYS_FSL_NUM_CC_PLLS 2 #define CONFIG_SYS_FSL_NUM_LAWS 32 #define CONFIG_SYS_FSL_SEC_COMPAT 4 +#define CONFIG_SYS_NUM_FMAN 1 +#define CONFIG_SYS_NUM_FM1_DTSEC 5 +#define CONFIG_SYS_NUM_FM1_10GEC 1 +#define CONFIG_NUM_DDR_CONTROLLERS 2 +#define CONFIG_SYS_FM_MURAM_SIZE 0x28000 +#define CONFIG_SYS_FSL_TBCLK_DIV 32 +#define CONFIG_SYS_FSL_USB1_PHY_ENABLE +#define CONFIG_SYS_FSL_USB2_PHY_ENABLE +#define CONFIG_SYS_FSL_ERRATUM_ESDHC111 #else #error Processor type not defined for this platform diff --git a/arch/powerpc/include/asm/fsl_ddr_sdram.h b/arch/powerpc/include/asm/fsl_ddr_sdram.h index 02a1f5d..127a840 100644 --- a/arch/powerpc/include/asm/fsl_ddr_sdram.h +++ b/arch/powerpc/include/asm/fsl_ddr_sdram.h @@ -84,6 +84,7 @@ typedef ddr3_spd_eeprom_t generic_spd_eeprom_t; #define SDRAM_CFG_SDRAM_TYPE_SHIFT 24 #define SDRAM_CFG_DYN_PWR 0x00200000 #define SDRAM_CFG_32_BE 0x00080000 +#define SDRAM_CFG_16_BE 0x00100000 #define SDRAM_CFG_8_BE 0x00040000 #define SDRAM_CFG_NCAP 0x00020000 #define SDRAM_CFG_2T_EN 0x00008000 @@ -270,7 +271,10 @@ typedef struct memctl_options_s { } memctl_options_t; extern phys_size_t fsl_ddr_sdram(void); +extern phys_size_t fsl_ddr_sdram_size(void); extern int fsl_use_spd(void); +extern void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, + unsigned int ctrl_num); /* * The 85xx boards have a common prototype for fixed_sdram so put the diff --git a/arch/powerpc/include/asm/fsl_enet.h b/arch/powerpc/include/asm/fsl_enet.h index 4fb2857..8227b66 100644 --- a/arch/powerpc/include/asm/fsl_enet.h +++ b/arch/powerpc/include/asm/fsl_enet.h @@ -13,21 +13,18 @@ #ifndef __ASM_PPC_FSL_ENET_H #define __ASM_PPC_FSL_ENET_H -enum fsl_phy_enet_if { - MII, - RMII, - GMII, - RGMII, - RGMII_ID, - RGMII_RXID, - RGMII_TXID, - SGMII, - TBI, - RTBI, - XAUI, - FSL_ETH_IF_NONE, -}; +#include <phy.h> -int fdt_fixup_phy_connection(void *blob, int offset, enum fsl_phy_enet_if phyc); +struct tsec_mii_mng { + u32 miimcfg; /* MII management configuration reg */ + u32 miimcom; /* MII management command reg */ + u32 miimadd; /* MII management address reg */ + u32 miimcon; /* MII management control reg */ + u32 miimstat; /* MII management status reg */ + u32 miimind; /* MII management indication reg */ + u32 ifstat; /* Interface Status Register */ +} __attribute__ ((packed)); + +int fdt_fixup_phy_connection(void *blob, int offset, phy_interface_t phyc); #endif /* __ASM_PPC_FSL_ENET_H */ diff --git a/arch/powerpc/include/asm/fsl_ifc.h b/arch/powerpc/include/asm/fsl_ifc.h new file mode 100644 index 0000000..d4d9809 --- /dev/null +++ b/arch/powerpc/include/asm/fsl_ifc.h @@ -0,0 +1,957 @@ +/* + * Copyright 2010-2011 Freescale Semiconductor, Inc. + * Author: Dipen Dudhat <dipen.dudhat@freescale.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ASM_PPC_FSL_IFC_H +#define __ASM_PPC_FSL_IFC_H + +#include <config.h> +#include <common.h> + +/* + * CSPR - Chip Select Property Register + */ +#define CSPR_BA 0xFFFF0000 +#define CSPR_BA_SHIFT 16 +#define CSPR_PORT_SIZE 0x00000180 +#define CSPR_PORT_SIZE_SHIFT 7 +/* Port Size 8 bit */ +#define CSPR_PORT_SIZE_8 0x00000080 +/* Port Size 16 bit */ +#define CSPR_PORT_SIZE_16 0x00000100 +/* Port Size 32 bit */ +#define CSPR_PORT_SIZE_32 0x00000180 +/* Write Protect */ +#define CSPR_WP 0x00000040 +#define CSPR_WP_SHIFT 6 +/* Machine Select */ +#define CSPR_MSEL 0x00000006 +#define CSPR_MSEL_SHIFT 1 +/* NOR */ +#define CSPR_MSEL_NOR 0x00000000 +/* NAND */ +#define CSPR_MSEL_NAND 0x00000002 +/* GPCM */ +#define CSPR_MSEL_GPCM 0x00000004 +/* Bank Valid */ +#define CSPR_V 0x00000001 +#define CSPR_V_SHIFT 0 + +/* Convert an address into the right format for the CSPR Registers */ +#define CSPR_PHYS_ADDR(x) (((uint64_t)x) & 0xffff0000) + +/* + * Address Mask Register + */ +#define IFC_AMASK_MASK 0xFFFF0000 +#define IFC_AMASK_SHIFT 16 +#define IFC_AMASK(n) (IFC_AMASK_MASK << \ + (__ilog2(n) - IFC_AMASK_SHIFT)) + +/* + * Chip Select Option Register IFC_NAND Machine + */ +/* Enable ECC Encoder */ +#define CSOR_NAND_ECC_ENC_EN 0x80000000 +/* 4 bit correction per 520 Byte sector */ +#define CSOR_NAND_ECC_MODE_4 0x00000000 +/* 8 bit correction per 528 Byte sector */ +#define CSOR_NAND_ECC_MODE_8 0x10000000 +/* Enable ECC Decoder */ +#define CSOR_NAND_ECC_DEC_EN 0x04000000 +/* Row Address Length */ +#define CSOR_NAND_RAL_MASK 0x01800000 +#define CSOR_NAND_RAL_SHIFT 20 +#define CSOR_NAND_RAL_1 0x00000000 +#define CSOR_NAND_RAL_2 0x00800000 +#define CSOR_NAND_RAL_3 0x01000000 +#define CSOR_NAND_RAL_4 0x01800000 +/* Page Size 512b, 2k, 4k */ +#define CSOR_NAND_PGS_MASK 0x00180000 +#define CSOR_NAND_PGS_SHIFT 16 +#define CSOR_NAND_PGS_512 0x00000000 +#define CSOR_NAND_PGS_2K 0x00080000 +#define CSOR_NAND_PGS_4K 0x00100000 +/* Spare region Size */ +#define CSOR_NAND_SPRZ_MASK 0x0000E000 +#define CSOR_NAND_SPRZ_SHIFT 13 +#define CSOR_NAND_SPRZ_16 0x00000000 +#define CSOR_NAND_SPRZ_64 0x00002000 +#define CSOR_NAND_SPRZ_128 0x00004000 +#define CSOR_NAND_SPRZ_210 0x00006000 +#define CSOR_NAND_SPRZ_218 0x00008000 +#define CSOR_NAND_SPRZ_224 0x0000A000 +/* Pages Per Block */ +#define CSOR_NAND_PB_MASK 0x00000700 +#define CSOR_NAND_PB_SHIFT 8 +#define CSOR_NAND_PB(n) ((__ilog2(n) - 5) << CSOR_NAND_PB_SHIFT) +/* Time for Read Enable High to Output High Impedance */ +#define CSOR_NAND_TRHZ_MASK 0x0000001C +#define CSOR_NAND_TRHZ_SHIFT 2 +#define CSOR_NAND_TRHZ_20 0x00000000 +#define CSOR_NAND_TRHZ_40 0x00000004 +#define CSOR_NAND_TRHZ_60 0x00000008 +#define CSOR_NAND_TRHZ_80 0x0000000C +#define CSOR_NAND_TRHZ_100 0x00000010 +/* Buffer control disable */ +#define CSOR_NAND_BCTLD 0x00000001 + +/* + * Chip Select Option Register - NOR Flash Mode + */ +/* Enable Address shift Mode */ +#define CSOR_NOR_ADM_SHFT_MODE_EN 0x80000000 +/* Page Read Enable from NOR device */ +#define CSOR_NOR_PGRD_EN 0x10000000 +/* AVD Toggle Enable during Burst Program */ +#define CSOR_NOR_AVD_TGL_PGM_EN 0x01000000 +/* Address Data Multiplexing Shift */ +#define CSOR_NOR_ADM_MASK 0x0003E000 +#define CSOR_NOR_ADM_SHIFT_SHIFT 13 +#define CSOR_NOR_ADM_SHIFT(n) ((n) << CSOR_NOR_ADM_SHIFT_SHIFT) +/* Type of the NOR device hooked */ +#define CSOR_NOR_NOR_MODE_AYSNC_NOR 0x00000000 +#define CSOR_NOR_NOR_MODE_AVD_NOR 0x00000020 +/* Time for Read Enable High to Output High Impedance */ +#define CSOR_NOR_TRHZ_MASK 0x0000001C +#define CSOR_NOR_TRHZ_SHIFT 2 +#define CSOR_NOR_TRHZ_20 0x00000000 +#define CSOR_NOR_TRHZ_40 0x00000004 +#define CSOR_NOR_TRHZ_60 0x00000008 +#define CSOR_NOR_TRHZ_80 0x0000000C +#define CSOR_NOR_TRHZ_100 0x00000010 +/* Buffer control disable */ +#define CSOR_NOR_BCTLD 0x00000001 + +/* + * Chip Select Option Register - GPCM Mode + */ +/* GPCM Mode - Normal */ +#define CSOR_GPCM_GPMODE_NORMAL 0x00000000 +/* GPCM Mode - GenericASIC */ +#define CSOR_GPCM_GPMODE_ASIC 0x80000000 +/* Parity Mode odd/even */ +#define CSOR_GPCM_PARITY_EVEN 0x40000000 +/* Parity Checking enable/disable */ +#define CSOR_GPCM_PAR_EN 0x20000000 +/* GPCM Timeout Count */ +#define CSOR_GPCM_GPTO_MASK 0x0F000000 +#define CSOR_GPCM_GPTO_SHIFT 24 +#define CSOR_GPCM_GPTO(n) ((__ilog2(n) - 8) << CSOR_GPCM_GPTO_SHIFT) +/* GPCM External Access Termination mode for read access */ +#define CSOR_GPCM_RGETA_EXT 0x00080000 +/* GPCM External Access Termination mode for write access */ +#define CSOR_GPCM_WGETA_EXT 0x00040000 +/* Address Data Multiplexing Shift */ +#define CSOR_GPCM_ADM_MASK 0x0003E000 +#define CSOR_GPCM_ADM_SHIFT_SHIFT 13 +#define CSOR_GPCM_ADM_SHIFT(n) ((n) << CSOR_GPCM_ADM_SHIFT_SHIFT) +/* Generic ASIC Parity error indication delay */ +#define CSOR_GPCM_GAPERRD_MASK 0x00000180 +#define CSOR_GPCM_GAPERRD_SHIFT 7 +#define CSOR_GPCM_GAPERRD(n) (((n) - 1) << CSOR_GPCM_GAPERRD_SHIFT) +/* Time for Read Enable High to Output High Impedance */ +#define CSOR_GPCM_TRHZ_MASK 0x0000001C +#define CSOR_GPCM_TRHZ_20 0x00000000 +#define CSOR_GPCM_TRHZ_40 0x00000004 +#define CSOR_GPCM_TRHZ_60 0x00000008 +#define CSOR_GPCM_TRHZ_80 0x0000000C +#define CSOR_GPCM_TRHZ_100 0x00000010 +/* Buffer control disable */ +#define CSOR_GPCM_BCTLD 0x00000001 + +/* + * Flash Timing Registers (FTIM0 - FTIM2_CSn) + */ +/* + * FTIM0 - NAND Flash Mode + */ +#define FTIM0_NAND 0x7EFF3F3F +#define FTIM0_NAND_TCCST_SHIFT 25 +#define FTIM0_NAND_TCCST(n) ((n) << FTIM0_NAND_TCCST_SHIFT) +#define FTIM0_NAND_TWP_SHIFT 16 +#define FTIM0_NAND_TWP(n) ((n) << FTIM0_NAND_TWP_SHIFT) +#define FTIM0_NAND_TWCHT_SHIFT 8 +#define FTIM0_NAND_TWCHT(n) ((n) << FTIM0_NAND_TWCHT_SHIFT) +#define FTIM0_NAND_TWH_SHIFT 0 +#define FTIM0_NAND_TWH(n) ((n) << FTIM0_NAND_TWH_SHIFT) +/* + * FTIM1 - NAND Flash Mode + */ +#define FTIM1_NAND 0xFFFF3FFF +#define FTIM1_NAND_TADLE_SHIFT 24 +#define FTIM1_NAND_TADLE(n) ((n) << FTIM1_NAND_TADLE_SHIFT) +#define FTIM1_NAND_TWBE_SHIFT 16 +#define FTIM1_NAND_TWBE(n) ((n) << FTIM1_NAND_TWBE_SHIFT) +#define FTIM1_NAND_TRR_SHIFT 8 +#define FTIM1_NAND_TRR(n) ((n) << FTIM1_NAND_TRR_SHIFT) +#define FTIM1_NAND_TRP_SHIFT 0 +#define FTIM1_NAND_TRP(n) ((n) << FTIM1_NAND_TRP_SHIFT) +/* + * FTIM2 - NAND Flash Mode + */ +#define FTIM2_NAND 0x1FE1F8FF +#define FTIM2_NAND_TRAD_SHIFT 21 +#define FTIM2_NAND_TRAD(n) ((n) << FTIM2_NAND_TRAD_SHIFT) +#define FTIM2_NAND_TREH_SHIFT 11 +#define FTIM2_NAND_TREH(n) ((n) << FTIM2_NAND_TREH_SHIFT) +#define FTIM2_NAND_TWHRE_SHIFT 0 +#define FTIM2_NAND_TWHRE(n) ((n) << FTIM2_NAND_TWHRE_SHIFT) +/* + * FTIM3 - NAND Flash Mode + */ +#define FTIM3_NAND 0xFF000000 +#define FTIM3_NAND_TWW_SHIFT 24 +#define FTIM3_NAND_TWW(n) ((n) << FTIM3_NAND_TWW_SHIFT) + +/* + * FTIM0 - NOR Flash Mode + */ +#define FTIM0_NOR 0xF03F3F3F +#define FTIM0_NOR_TACSE_SHIFT 28 +#define FTIM0_NOR_TACSE(n) ((n) << FTIM0_NOR_TACSE_SHIFT) +#define FTIM0_NOR_TEADC_SHIFT 16 +#define FTIM0_NOR_TEADC(n) ((n) << FTIM0_NOR_TEADC_SHIFT) +#define FTIM0_NOR_TAVDS_SHIFT 8 +#define FTIM0_NOR_TAVDS(n) ((n) << FTIM0_NOR_TAVDS_SHIFT) +#define FTIM0_NOR_TEAHC_SHIFT 0 +#define FTIM0_NOR_TEAHC(n) ((n) << FTIM0_NOR_TEAHC_SHIFT) +/* + * FTIM1 - NOR Flash Mode + */ +#define FTIM1_NOR 0xFF003F3F +#define FTIM1_NOR_TACO_SHIFT 24 +#define FTIM1_NOR_TACO(n) ((n) << FTIM1_NOR_TACO_SHIFT) +#define FTIM1_NOR_TRAD_NOR_SHIFT 8 +#define FTIM1_NOR_TRAD_NOR(n) ((n) << FTIM1_NOR_TRAD_NOR_SHIFT) +#define FTIM1_NOR_TSEQRAD_NOR_SHIFT 0 +#define FTIM1_NOR_TSEQRAD_NOR(n) ((n) << FTIM1_NOR_TSEQRAD_NOR_SHIFT) +/* + * FTIM2 - NOR Flash Mode + */ +#define FTIM2_NOR 0x0F3CFCFF +#define FTIM2_NOR_TCS_SHIFT 24 +#define FTIM2_NOR_TCS(n) ((n) << FTIM2_NOR_TCS_SHIFT) +#define FTIM2_NOR_TCH_SHIFT 18 +#define FTIM2_NOR_TCH(n) ((n) << FTIM2_NOR_TCH_SHIFT) +#define FTIM2_NOR_TWPH_SHIFT 10 +#define FTIM2_NOR_TWPH(n) ((n) << FTIM2_NOR_TWPH_SHIFT) +#define FTIM2_NOR_TWP_SHIFT 0 +#define FTIM2_NOR_TWP(n) ((n) << FTIM2_NOR_TWP_SHIFT) + +/* + * FTIM0 - Normal GPCM Mode + */ +#define FTIM0_GPCM 0xF03F3F3F +#define FTIM0_GPCM_TACSE_SHIFT 28 +#define FTIM0_GPCM_TACSE(n) ((n) << FTIM0_GPCM_TACSE_SHIFT) +#define FTIM0_GPCM_TEADC_SHIFT 16 +#define FTIM0_GPCM_TEADC(n) ((n) << FTIM0_GPCM_TEADC_SHIFT) +#define FTIM0_GPCM_TAVDS_SHIFT 8 +#define FTIM0_GPCM_TAVDS(n) ((n) << FTIM0_GPCM_TAVDS_SHIFT) +#define FTIM0_GPCM_TEAHC_SHIFT 0 +#define FTIM0_GPCM_TEAHC(n) ((n) << FTIM0_GPCM_TEAHC_SHIFT) +/* + * FTIM1 - Normal GPCM Mode + */ +#define FTIM1_GPCM 0xFF003F00 +#define FTIM1_GPCM_TACO_SHIFT 24 +#define FTIM1_GPCM_TACO(n) ((n) << FTIM1_GPCM_TACO_SHIFT) +#define FTIM1_GPCM_TRAD_SHIFT 8 +#define FTIM1_GPCM_TRAD(n) ((n) << FTIM1_GPCM_TRAD_SHIFT) +/* + * FTIM2 - Normal GPCM Mode + */ +#define FTIM2_GPCM 0x0F3C00FF +#define FTIM2_GPCM_TCS_SHIFT 24 +#define FTIM2_GPCM_TCS(n) ((n) << FTIM2_GPCM_TCS_SHIFT) +#define FTIM2_GPCM_TCH_SHIFT 18 +#define FTIM2_GPCM_TCH(n) ((n) << FTIM2_GPCM_TCH_SHIFT) +#define FTIM2_GPCM_TWP_SHIFT 0 +#define FTIM2_GPCM_TWP(n) ((n) << FTIM2_GPCM_TWP_SHIFT) + +/* + * Ready Busy Status Register (RB_STAT) + */ +/* CSn is READY */ +#define IFC_RB_STAT_READY_CS0 0x80000000 +#define IFC_RB_STAT_READY_CS1 0x40000000 +#define IFC_RB_STAT_READY_CS2 0x20000000 +#define IFC_RB_STAT_READY_CS3 0x10000000 + +/* + * General Control Register (GCR) + */ +#define IFC_GCR_MASK 0x8000F800 +/* reset all IFC hardware */ +#define IFC_GCR_SOFT_RST_ALL 0x80000000 +/* Turnaroud Time of external buffer */ +#define IFC_GCR_TBCTL_TRN_TIME 0x0000F800 +#define IFC_GCR_TBCTL_TRN_TIME_SHIFT 11 + +/* + * Common Event and Error Status Register (CM_EVTER_STAT) + */ +/* Chip select error */ +#define IFC_CM_EVTER_STAT_CSER 0x80000000 + +/* + * Common Event and Error Enable Register (CM_EVTER_EN) + */ +/* Chip select error checking enable */ +#define IFC_CM_EVTER_EN_CSEREN 0x80000000 + +/* + * Common Event and Error Interrupt Enable Register (CM_EVTER_INTR_EN) + */ +/* Chip select error interrupt enable */ +#define IFC_CM_EVTER_INTR_EN_CSERIREN 0x80000000 + +/* + * Common Transfer Error Attribute Register-0 (CM_ERATTR0) + */ +/* transaction type of error Read/Write */ +#define IFC_CM_ERATTR0_ERTYP_READ 0x80000000 +#define IFC_CM_ERATTR0_ERAID 0x0FF00000 +#define IFC_CM_ERATTR0_ESRCID 0x0000FF00 + +/* + * Clock Control Register (CCR) + */ +#define IFC_CCR_MASK 0x0F0F8800 +/* Clock division ratio */ +#define IFC_CCR_CLK_DIV_MASK 0x0F000000 +#define IFC_CCR_CLK_DIV_SHIFT 24 +#define IFC_CCR_CLK_DIV(n) ((n-1) << IFC_CCR_CLK_DIV_SHIFT) +/* IFC Clock Delay */ +#define IFC_CCR_CLK_DLY_MASK 0x000F0000 +#define IFC_CCR_CLK_DLY_SHIFT 16 +#define IFC_CCR_CLK_DLY(n) ((n) << IFC_CCR_CLK_DLY_SHIFT) +/* Invert IFC clock before sending out */ +#define IFC_CCR_INV_CLK_EN 0x00008000 +/* Fedback IFC Clock */ +#define IFC_CCR_FB_IFC_CLK_SEL 0x00000800 + +/* + * Clock Status Register (CSR) + */ +/* Clk is stable */ +#define IFC_CSR_CLK_STAT_STABLE 0x80000000 + +/* + * IFC_NAND Machine Specific Registers + */ +/* + * NAND Configuration Register (NCFGR) + */ +/* Auto Boot Mode */ +#define IFC_NAND_NCFGR_BOOT 0x80000000 +/* Addressing Mode-ROW0+n/COL0 */ +#define IFC_NAND_NCFGR_ADDR_MODE_RC0 0x00000000 +/* Addressing Mode-ROW0+n/COL0+n */ +#define IFC_NAND_NCFGR_ADDR_MODE_RC1 0x00400000 +/* Number of loop iterations of FIR sequences for multi page operations */ +#define IFC_NAND_NCFGR_NUM_LOOP_MASK 0x0000F000 +#define IFC_NAND_NCFGR_NUM_LOOP_SHIFT 12 +#define IFC_NAND_NCFGR_NUM_LOOP(n) ((n) << IFC_NAND_NCFGR_NUM_LOOP_SHIFT) +/* Number of wait cycles */ +#define IFC_NAND_NCFGR_NUM_WAIT_MASK 0x000000FF +#define IFC_NAND_NCFGR_NUM_WAIT_SHIFT 0 + +/* + * NAND Flash Command Registers (NAND_FCR0/NAND_FCR1) + */ +/* General purpose FCM flash command bytes CMD0-CMD7 */ +#define IFC_NAND_FCR0_CMD0 0xFF000000 +#define IFC_NAND_FCR0_CMD0_SHIFT 24 +#define IFC_NAND_FCR0_CMD1 0x00FF0000 +#define IFC_NAND_FCR0_CMD1_SHIFT 16 +#define IFC_NAND_FCR0_CMD2 0x0000FF00 +#define IFC_NAND_FCR0_CMD2_SHIFT 8 +#define IFC_NAND_FCR0_CMD3 0x000000FF +#define IFC_NAND_FCR0_CMD3_SHIFT 0 +#define IFC_NAND_FCR1_CMD4 0xFF000000 +#define IFC_NAND_FCR1_CMD4_SHIFT 24 +#define IFC_NAND_FCR1_CMD5 0x00FF0000 +#define IFC_NAND_FCR1_CMD5_SHIFT 16 +#define IFC_NAND_FCR1_CMD6 0x0000FF00 +#define IFC_NAND_FCR1_CMD6_SHIFT 8 +#define IFC_NAND_FCR1_CMD7 0x000000FF +#define IFC_NAND_FCR1_CMD7_SHIFT 0 + +/* + * Flash ROW and COL Address Register (ROWn, COLn) + */ +/* Main/spare region locator */ +#define IFC_NAND_COL_MS 0x80000000 +/* Column Address */ +#define IFC_NAND_COL_CA_MASK 0x00000FFF + +/* + * NAND Flash Byte Count Register (NAND_BC) + */ +/* Byte Count for read/Write */ +#define IFC_NAND_BC 0x000001FF + +/* + * NAND Flash Instruction Registers (NAND_FIR0/NAND_FIR1/NAND_FIR2) + */ +/* NAND Machine specific opcodes OP0-OP14*/ +#define IFC_NAND_FIR0_OP0 0xFC000000 +#define IFC_NAND_FIR0_OP0_SHIFT 26 +#define IFC_NAND_FIR0_OP1 0x03F00000 +#define IFC_NAND_FIR0_OP1_SHIFT 20 +#define IFC_NAND_FIR0_OP2 0x000FC000 +#define IFC_NAND_FIR0_OP2_SHIFT 14 +#define IFC_NAND_FIR0_OP3 0x00003F00 +#define IFC_NAND_FIR0_OP3_SHIFT 8 +#define IFC_NAND_FIR0_OP4 0x000000FC +#define IFC_NAND_FIR0_OP4_SHIFT 2 +#define IFC_NAND_FIR1_OP5 0xFC000000 +#define IFC_NAND_FIR1_OP5_SHIFT 26 +#define IFC_NAND_FIR1_OP6 0x03F00000 +#define IFC_NAND_FIR1_OP6_SHIFT 20 +#define IFC_NAND_FIR1_OP7 0x000FC000 +#define IFC_NAND_FIR1_OP7_SHIFT 14 +#define IFC_NAND_FIR1_OP8 0x00003F00 +#define IFC_NAND_FIR1_OP8_SHIFT 8 +#define IFC_NAND_FIR1_OP9 0x000000FC +#define IFC_NAND_FIR1_OP9_SHIFT 2 +#define IFC_NAND_FIR2_OP10 0xFC000000 +#define IFC_NAND_FIR2_OP10_SHIFT 26 +#define IFC_NAND_FIR2_OP11 0x03F00000 +#define IFC_NAND_FIR2_OP11_SHIFT 20 +#define IFC_NAND_FIR2_OP12 0x000FC000 +#define IFC_NAND_FIR2_OP12_SHIFT 14 +#define IFC_NAND_FIR2_OP13 0x00003F00 +#define IFC_NAND_FIR2_OP13_SHIFT 8 +#define IFC_NAND_FIR2_OP14 0x000000FC +#define IFC_NAND_FIR2_OP14_SHIFT 2 + +/* + * Instruction opcodes to be programmed + * in FIR registers- 6bits + */ +enum ifc_nand_fir_opcodes { + IFC_FIR_OP_NOP, + IFC_FIR_OP_CA0, + IFC_FIR_OP_CA1, + IFC_FIR_OP_CA2, + IFC_FIR_OP_CA3, + IFC_FIR_OP_RA0, + IFC_FIR_OP_RA1, + IFC_FIR_OP_RA2, + IFC_FIR_OP_RA3, + IFC_FIR_OP_CMD0, + IFC_FIR_OP_CMD1, + IFC_FIR_OP_CMD2, + IFC_FIR_OP_CMD3, + IFC_FIR_OP_CMD4, + IFC_FIR_OP_CMD5, + IFC_FIR_OP_CMD6, + IFC_FIR_OP_CMD7, + IFC_FIR_OP_CW0, + IFC_FIR_OP_CW1, + IFC_FIR_OP_CW2, + IFC_FIR_OP_CW3, + IFC_FIR_OP_CW4, + IFC_FIR_OP_CW5, + IFC_FIR_OP_CW6, + IFC_FIR_OP_CW7, + IFC_FIR_OP_WBCD, + IFC_FIR_OP_RBCD, + IFC_FIR_OP_BTRD, + IFC_FIR_OP_RDSTAT, + IFC_FIR_OP_NWAIT, + IFC_FIR_OP_WFR, + IFC_FIR_OP_SBRD, + IFC_FIR_OP_UA, + IFC_FIR_OP_RB, +}; + +/* + * NAND Chip Select Register (NAND_CSEL) + */ +#define IFC_NAND_CSEL 0x0C000000 +#define IFC_NAND_CSEL_SHIFT 26 +#define IFC_NAND_CSEL_CS0 0x00000000 +#define IFC_NAND_CSEL_CS1 0x04000000 +#define IFC_NAND_CSEL_CS2 0x08000000 +#define IFC_NAND_CSEL_CS3 0x0C000000 + +/* + * NAND Operation Sequence Start (NANDSEQ_STRT) + */ +/* NAND Flash Operation Start */ +#define IFC_NAND_SEQ_STRT_FIR_STRT 0x80000000 +/* Automatic Erase */ +#define IFC_NAND_SEQ_STRT_AUTO_ERS 0x00800000 +/* Automatic Program */ +#define IFC_NAND_SEQ_STRT_AUTO_PGM 0x00100000 +/* Automatic Copyback */ +#define IFC_NAND_SEQ_STRT_AUTO_CPB 0x00020000 +/* Automatic Read Operation */ +#define IFC_NAND_SEQ_STRT_AUTO_RD 0x00004000 +/* Automatic Status Read */ +#define IFC_NAND_SEQ_STRT_AUTO_STAT_RD 0x00000800 + +/* + * NAND Event and Error Status Register (NAND_EVTER_STAT) + */ +/* Operation Complete */ +#define IFC_NAND_EVTER_STAT_OPC 0x80000000 +/* Flash Timeout Error */ +#define IFC_NAND_EVTER_STAT_FTOER 0x08000000 +/* Write Protect Error */ +#define IFC_NAND_EVTER_STAT_WPER 0x04000000 +/* ECC Error */ +#define IFC_NAND_EVTER_STAT_ECCER 0x02000000 +/* RCW Load Done */ +#define IFC_NAND_EVTER_STAT_RCW_DN 0x00008000 +/* Boot Loadr Done */ +#define IFC_NAND_EVTER_STAT_BOOT_DN 0x00004000 +/* Bad Block Indicator search select */ +#define IFC_NAND_EVTER_STAT_BBI_SRCH_SE 0x00000800 + +/* + * NAND Flash Page Read Completion Event Status Register + * (PGRDCMPL_EVT_STAT) + */ +#define PGRDCMPL_EVT_STAT_MASK 0xFFFF0000 +/* Small Page 0-15 Done */ +#define PGRDCMPL_EVT_STAT_SECTION_SP(n) (1 << (31 - (n))) +/* Large Page(2K) 0-3 Done */ +#define PGRDCMPL_EVT_STAT_LP_2K(n) (0xF << (28 - (n)*4)) +/* Large Page(4K) 0-1 Done */ +#define PGRDCMPL_EVT_STAT_LP_4K(n) (0xFF << (24 - (n)*8)) + +/* + * NAND Event and Error Enable Register (NAND_EVTER_EN) + */ +/* Operation complete event enable */ +#define IFC_NAND_EVTER_EN_OPC_EN 0x80000000 +/* Page read complete event enable */ +#define IFC_NAND_EVTER_EN_PGRDCMPL_EN 0x20000000 +/* Flash Timeout error enable */ +#define IFC_NAND_EVTER_EN_FTOER_EN 0x08000000 +/* Write Protect error enable */ +#define IFC_NAND_EVTER_EN_WPER_EN 0x04000000 +/* ECC error logging enable */ +#define IFC_NAND_EVTER_EN_ECCER_EN 0x02000000 + +/* + * NAND Event and Error Interrupt Enable Register (NAND_EVTER_INTR_EN) + */ +/* Enable interrupt for operation complete */ +#define IFC_NAND_EVTER_INTR_OPCIR_EN 0x80000000 +/* Enable interrupt for Page read complete */ +#define IFC_NAND_EVTER_INTR_PGRDCMPLIR_EN 0x20000000 +/* Enable interrupt for Flash timeout error */ +#define IFC_NAND_EVTER_INTR_FTOERIR_EN 0x08000000 +/* Enable interrupt for Write protect error */ +#define IFC_NAND_EVTER_INTR_WPERIR_EN 0x04000000 +/* Enable interrupt for ECC error*/ +#define IFC_NAND_EVTER_INTR_ECCERIR_EN 0x02000000 + +/* + * NAND Transfer Error Attribute Register-0 (NAND_ERATTR0) + */ +#define IFC_NAND_ERATTR0_MASK 0x0C080000 +/* Error on CS0-3 for NAND */ +#define IFC_NAND_ERATTR0_ERCS_CS0 0x00000000 +#define IFC_NAND_ERATTR0_ERCS_CS1 0x04000000 +#define IFC_NAND_ERATTR0_ERCS_CS2 0x08000000 +#define IFC_NAND_ERATTR0_ERCS_CS3 0x0C000000 +/* Transaction type of error Read/Write */ +#define IFC_NAND_ERATTR0_ERTTYPE_READ 0x00080000 + +/* + * NAND Flash Status Register (NAND_FSR) + */ +/* First byte of data read from read status op */ +#define IFC_NAND_NFSR_RS0 0xFF000000 +/* Second byte of data read from read status op */ +#define IFC_NAND_NFSR_RS1 0x00FF0000 + +/* + * ECC Error Status Registers (ECCSTAT0-ECCSTAT3) + */ +/* Number of ECC errors on sector n (n = 0-15) */ +#define IFC_NAND_ECCSTAT0_ERRCNT_SECTOR0_MASK 0x0F000000 +#define IFC_NAND_ECCSTAT0_ERRCNT_SECTOR0_SHIFT 24 +#define IFC_NAND_ECCSTAT0_ERRCNT_SECTOR1_MASK 0x000F0000 +#define IFC_NAND_ECCSTAT0_ERRCNT_SECTOR1_SHIFT 16 +#define IFC_NAND_ECCSTAT0_ERRCNT_SECTOR2_MASK 0x00000F00 +#define IFC_NAND_ECCSTAT0_ERRCNT_SECTOR2_SHIFT 8 +#define IFC_NAND_ECCSTAT0_ERRCNT_SECTOR3_MASK 0x0000000F +#define IFC_NAND_ECCSTAT0_ERRCNT_SECTOR3_SHIFT 0 +#define IFC_NAND_ECCSTAT1_ERRCNT_SECTOR4_MASK 0x0F000000 +#define IFC_NAND_ECCSTAT1_ERRCNT_SECTOR4_SHIFT 24 +#define IFC_NAND_ECCSTAT1_ERRCNT_SECTOR5_MASK 0x000F0000 +#define IFC_NAND_ECCSTAT1_ERRCNT_SECTOR5_SHIFT 16 +#define IFC_NAND_ECCSTAT1_ERRCNT_SECTOR6_MASK 0x00000F00 +#define IFC_NAND_ECCSTAT1_ERRCNT_SECTOR6_SHIFT 8 +#define IFC_NAND_ECCSTAT1_ERRCNT_SECTOR7_MASK 0x0000000F +#define IFC_NAND_ECCSTAT1_ERRCNT_SECTOR7_SHIFT 0 +#define IFC_NAND_ECCSTAT2_ERRCNT_SECTOR8_MASK 0x0F000000 +#define IFC_NAND_ECCSTAT2_ERRCNT_SECTOR8_SHIFT 24 +#define IFC_NAND_ECCSTAT2_ERRCNT_SECTOR9_MASK 0x000F0000 +#define IFC_NAND_ECCSTAT2_ERRCNT_SECTOR9_SHIFT 16 +#define IFC_NAND_ECCSTAT2_ERRCNT_SECTOR10_MASK 0x00000F00 +#define IFC_NAND_ECCSTAT2_ERRCNT_SECTOR10_SHIFT 8 +#define IFC_NAND_ECCSTAT2_ERRCNT_SECTOR11_MASK 0x0000000F +#define IFC_NAND_ECCSTAT2_ERRCNT_SECTOR11_SHIFT 0 +#define IFC_NAND_ECCSTAT3_ERRCNT_SECTOR12_MASK 0x0F000000 +#define IFC_NAND_ECCSTAT3_ERRCNT_SECTOR12_SHIFT 24 +#define IFC_NAND_ECCSTAT3_ERRCNT_SECTOR13_MASK 0x000F0000 +#define IFC_NAND_ECCSTAT3_ERRCNT_SECTOR13_SHIFT 16 +#define IFC_NAND_ECCSTAT3_ERRCNT_SECTOR14_MASK 0x00000F00 +#define IFC_NAND_ECCSTAT3_ERRCNT_SECTOR14_SHIFT 8 +#define IFC_NAND_ECCSTAT3_ERRCNT_SECTOR15_MASK 0x0000000F +#define IFC_NAND_ECCSTAT3_ERRCNT_SECTOR15_SHIFT 0 + +/* + * NAND Control Register (NANDCR) + */ +#define IFC_NAND_NCR_FTOCNT_MASK 0x1E000000 +#define IFC_NAND_NCR_FTOCNT_SHIFT 25 +#define IFC_NAND_NCR_FTOCNT(n) ((_ilog2(n) - 8) << IFC_NAND_NCR_FTOCNT_SHIFT) + +/* + * NAND_AUTOBOOT_TRGR + */ +/* Trigger RCW load */ +#define IFC_NAND_AUTOBOOT_TRGR_RCW_LD 0x80000000 +/* Trigget Auto Boot */ +#define IFC_NAND_AUTOBOOT_TRGR_BOOT_LD 0x20000000 + +/* + * NAND_MDR + */ +/* 1st read data byte when opcode SBRD */ +#define IFC_NAND_MDR_RDATA0 0xFF000000 +/* 2nd read data byte when opcode SBRD */ +#define IFC_NAND_MDR_RDATA1 0x00FF0000 + +/* + * NOR Machine Specific Registers + */ +/* + * NOR Event and Error Status Register (NOR_EVTER_STAT) + */ +/* NOR Command Sequence Operation Complete */ +#define IFC_NOR_EVTER_STAT_OPC_NOR 0x80000000 +/* Write Protect Error */ +#define IFC_NOR_EVTER_STAT_WPER 0x04000000 +/* Command Sequence Timeout Error */ +#define IFC_NOR_EVTER_STAT_STOER 0x01000000 + +/* + * NOR Event and Error Enable Register (NOR_EVTER_EN) + */ +/* NOR Command Seq complete event enable */ +#define IFC_NOR_EVTER_EN_OPCEN_NOR 0x80000000 +/* Write Protect Error Checking Enable */ +#define IFC_NOR_EVTER_EN_WPEREN 0x04000000 +/* Timeout Error Enable */ +#define IFC_NOR_EVTER_EN_STOEREN 0x01000000 + +/* + * NOR Event and Error Interrupt Enable Register (NOR_EVTER_INTR_EN) + */ +/* Enable interrupt for OPC complete */ +#define IFC_NOR_EVTER_INTR_OPCEN_NOR 0x80000000 +/* Enable interrupt for write protect error */ +#define IFC_NOR_EVTER_INTR_WPEREN 0x04000000 +/* Enable interrupt for timeout error */ +#define IFC_NOR_EVTER_INTR_STOEREN 0x01000000 + +/* + * NOR Transfer Error Attribute Register-0 (NOR_ERATTR0) + */ +/* Source ID for error transaction */ +#define IFC_NOR_ERATTR0_ERSRCID 0xFF000000 +/* AXI ID for error transation */ +#define IFC_NOR_ERATTR0_ERAID 0x000FF000 +/* Chip select corresponds to NOR error */ +#define IFC_NOR_ERATTR0_ERCS_CS0 0x00000000 +#define IFC_NOR_ERATTR0_ERCS_CS1 0x00000010 +#define IFC_NOR_ERATTR0_ERCS_CS2 0x00000020 +#define IFC_NOR_ERATTR0_ERCS_CS3 0x00000030 +/* Type of transaction read/write */ +#define IFC_NOR_ERATTR0_ERTYPE_READ 0x00000001 + +/* + * NOR Transfer Error Attribute Register-2 (NOR_ERATTR2) + */ +#define IFC_NOR_ERATTR2_ER_NUM_PHASE_EXP 0x000F0000 +#define IFC_NOR_ERATTR2_ER_NUM_PHASE_PER 0x00000F00 + +/* + * NOR Control Register (NORCR) + */ +#define IFC_NORCR_MASK 0x0F0F0000 +/* No. of Address/Data Phase */ +#define IFC_NORCR_NUM_PHASE_MASK 0x0F000000 +#define IFC_NORCR_NUM_PHASE_SHIFT 24 +#define IFC_NORCR_NUM_PHASE(n) ((n-1) << IFC_NORCR_NUM_PHASE_SHIFT) +/* Sequence Timeout Count */ +#define IFC_NORCR_STOCNT_MASK 0x000F0000 +#define IFC_NORCR_STOCNT_SHIFT 16 +#define IFC_NORCR_STOCNT(n) ((__ilog2(n) - 8) << IFC_NORCR_STOCNT_SHIFT) + +/* + * GPCM Machine specific registers + */ +/* + * GPCM Event and Error Status Register (GPCM_EVTER_STAT) + */ +/* Timeout error */ +#define IFC_GPCM_EVTER_STAT_TOER 0x04000000 +/* Parity error */ +#define IFC_GPCM_EVTER_STAT_PER 0x01000000 + +/* + * GPCM Event and Error Enable Register (GPCM_EVTER_EN) + */ +/* Timeout error enable */ +#define IFC_GPCM_EVTER_EN_TOER_EN 0x04000000 +/* Parity error enable */ +#define IFC_GPCM_EVTER_EN_PER_EN 0x01000000 + +/* + * GPCM Event and Error Interrupt Enable Register (GPCM_EVTER_INTR_EN) + */ +/* Enable Interrupt for timeout error */ +#define IFC_GPCM_EEIER_TOERIR_EN 0x04000000 +/* Enable Interrupt for Parity error */ +#define IFC_GPCM_EEIER_PERIR_EN 0x01000000 + +/* + * GPCM Transfer Error Attribute Register-0 (GPCM_ERATTR0) + */ +/* Source ID for error transaction */ +#define IFC_GPCM_ERATTR0_ERSRCID 0xFF000000 +/* AXI ID for error transaction */ +#define IFC_GPCM_ERATTR0_ERAID 0x000FF000 +/* Chip select corresponds to GPCM error */ +#define IFC_GPCM_ERATTR0_ERCS_CS0 0x00000000 +#define IFC_GPCM_ERATTR0_ERCS_CS1 0x00000040 +#define IFC_GPCM_ERATTR0_ERCS_CS2 0x00000080 +#define IFC_GPCM_ERATTR0_ERCS_CS3 0x000000C0 +/* Type of transaction read/Write */ +#define IFC_GPCM_ERATTR0_ERTYPE_READ 0x00000001 + +/* + * GPCM Transfer Error Attribute Register-2 (GPCM_ERATTR2) + */ +/* On which beat of address/data parity error is observed */ +#define IFC_GPCM_ERATTR2_PERR_BEAT 0x00000C00 +/* Parity Error on byte */ +#define IFC_GPCM_ERATTR2_PERR_BYTE 0x000000F0 +/* Parity Error reported in addr or data phase */ +#define IFC_GPCM_ERATTR2_PERR_DATA_PHASE 0x00000001 + +/* + * GPCM Status Register (GPCM_STAT) + */ +#define IFC_GPCM_STAT_BSY 0x80000000 /* GPCM is busy */ + + +#ifndef __ASSEMBLY__ +#include <asm/io.h> + +extern void print_ifc_regs(void); +extern void init_early_memctl_regs(void); + +#define IFC_BASE_ADDR ((struct fsl_ifc *)CONFIG_SYS_IFC_ADDR) + +#define get_ifc_cspr(i) (in_be32(&(IFC_BASE_ADDR)->cspr_cs[i].cspr)) +#define get_ifc_csor(i) (in_be32(&(IFC_BASE_ADDR)->csor_cs[i].csor)) +#define get_ifc_amask(i) (in_be32(&(IFC_BASE_ADDR)->amask_cs[i].amask)) +#define get_ifc_ftim(i, j) (in_be32(&(IFC_BASE_ADDR)->ftim_cs[i].ftim[j])) + +#define set_ifc_cspr(i, v) (out_be32(&(IFC_BASE_ADDR)->cspr_cs[i].cspr, v)) +#define set_ifc_csor(i, v) (out_be32(&(IFC_BASE_ADDR)->csor_cs[i].csor, v)) +#define set_ifc_amask(i, v) (out_be32(&(IFC_BASE_ADDR)->amask_cs[i].amask, v)) +#define set_ifc_ftim(i, j, v) \ + (out_be32(&(IFC_BASE_ADDR)->ftim_cs[i].ftim[j], v)) + +#define FSL_IFC_BANK_COUNT 4 + +enum ifc_chip_sel { + IFC_CS0, + IFC_CS1, + IFC_CS2, + IFC_CS3, +}; + +enum ifc_ftims { + IFC_FTIM0, + IFC_FTIM1, + IFC_FTIM2, + IFC_FTIM3, +}; + +/* + * IFC Controller NAND Machine registers + */ +struct fsl_ifc_nand { + u32 ncfgr; + u32 res1[0x4]; + u32 nand_fcr0; + u32 nand_fcr1; + u32 res2[0x8]; + u32 row0; + u32 res3; + u32 col0; + u32 res4; + u32 row1; + u32 res5; + u32 col1; + u32 res6; + u32 row2; + u32 res7; + u32 col2; + u32 res8; + u32 row3; + u32 res9; + u32 col3; + u32 res10[0x24]; + u32 nand_fbcr; + u32 res11; + u32 nand_fir0; + u32 nand_fir1; + u32 nand_fir2; + u32 res12[0x10]; + u32 nand_csel; + u32 res13; + u32 nandseq_strt; + u32 res14; + u32 nand_evter_stat; + u32 res15; + u32 pgrdcmpl_evt_stat; + u32 res16[0x2]; + u32 nand_evter_en; + u32 res17[0x2]; + u32 nand_evter_intr_en; + u32 res18[0x2]; + u32 nand_erattr0; + u32 nand_erattr1; + u32 res19[0x10]; + u32 nand_fsr; + u32 res20; + u32 nand_eccstat0; + u32 nand_eccstat1; + u32 nand_eccstat2; + u32 nand_eccstat3; + u32 res21[0x20]; + u32 nanndcr; + u32 res22[0x2]; + u32 nand_autoboot_trgr; + u32 res23; + u32 nand_mdr; + u32 res24[0x5C]; +}; + +/* + * IFC controller NOR Machine registers + */ +struct fsl_ifc_nor { + u32 nor_evter_stat; + u32 res1[0x2]; + u32 nor_evter_en; + u32 res2[0x2]; + u32 nor_evter_intr_en; + u32 res3[0x2]; + u32 nor_erattr0; + u32 nor_erattr1; + u32 nor_erattr2; + u32 res4[0x4]; + u32 norcr; + u32 res5[0xEF]; +}; + +/* + * IFC controller GPCM Machine registers + */ +struct fsl_ifc_gpcm { + u32 gpcm_evter_stat; + u32 res1[0x2]; + u32 gpcm_evter_en; + u32 res2[0x2]; + u32 gpcm_evter_intr_en; + u32 res3[0x2]; + u32 gpcm_erattr0; + u32 gpcm_erattr1; + u32 gpcm_erattr2; + u32 gpcm_stat; + u32 res4[0x1F3]; +}; + + +/* + * IFC Controller Registers + */ +struct fsl_ifc { + u32 ifc_rev; + u32 res1[0x3]; + struct { + u32 cspr; + u32 res2[0x2]; + } cspr_cs[FSL_IFC_BANK_COUNT]; + u32 res3[0x18]; + struct { + u32 amask; + u32 res4[0x2]; + } amask_cs[FSL_IFC_BANK_COUNT]; + u32 res5[0x18]; + struct { + u32 csor; + u32 res6[0x2]; + } csor_cs[FSL_IFC_BANK_COUNT]; + u32 res7[0x18]; + struct { + u32 ftim[4]; + u32 res8[0x8]; + } ftim_cs[FSL_IFC_BANK_COUNT]; + u32 res9[0x60]; + u32 rb_stat; + u32 res10[0x2]; + u32 ifc_gcr; + u32 res11[0x2]; + u32 cm_evter_stat; + u32 res12[0x2]; + u32 cm_evter_en; + u32 res13[0x2]; + u32 cm_evter_intr_en; + u32 res14[0x2]; + u32 cm_erattr0; + u32 cm_erattr1; + u32 res15[0x2]; + u32 ifc_ccr; + u32 ifc_csr; + u32 res16[0x2EB]; + struct fsl_ifc_nand ifc_nand; + struct fsl_ifc_nor ifc_nor; + struct fsl_ifc_gpcm ifc_gpcm; +}; + +#endif /* __ASSEMBLY__ */ +#endif /* __ASM_PPC_FSL_IFC_H */ diff --git a/arch/powerpc/include/asm/fsl_law.h b/arch/powerpc/include/asm/fsl_law.h index 6a4279c..13caffd 100644 --- a/arch/powerpc/include/asm/fsl_law.h +++ b/arch/powerpc/include/asm/fsl_law.h @@ -1,5 +1,5 @@ /* - * Copyright 2008-2010 Freescale Semiconductor, Inc. + * Copyright 2008-2011 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -83,6 +83,7 @@ enum law_trgt_if { LAW_TRGT_IF_DDR_INTRLV = 0x0b, LAW_TRGT_IF_RIO = 0x0c, LAW_TRGT_IF_RIO_2 = 0x0d, + LAW_TRGT_IF_DPAA_SWP_SRAM = 0x0e, LAW_TRGT_IF_DDR = 0x0f, LAW_TRGT_IF_DDR_2 = 0x16, /* 2nd controller */ }; @@ -91,6 +92,7 @@ enum law_trgt_if { #define LAW_TRGT_IF_PCIX LAW_TRGT_IF_PCI #define LAW_TRGT_IF_PCIE_2 LAW_TRGT_IF_PCI_2 #define LAW_TRGT_IF_RIO_1 LAW_TRGT_IF_RIO +#define LAW_TRGT_IF_IFC LAW_TRGT_IF_LBC #ifdef CONFIG_MPC8641 #define LAW_TRGT_IF_PCIE_1 LAW_TRGT_IF_PCI diff --git a/arch/powerpc/include/asm/fsl_liodn.h b/arch/powerpc/include/asm/fsl_liodn.h index 4c17fe2..801571f 100644 --- a/arch/powerpc/include/asm/fsl_liodn.h +++ b/arch/powerpc/include/asm/fsl_liodn.h @@ -1,5 +1,5 @@ /* - * Copyright 2009-2010 Freescale Semiconductor, Inc. + * Copyright 2009-2011 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -70,8 +70,8 @@ extern void fdt_fixup_liodn(void *blob); SET_GUTS_LIODN("fsl,pq-sata-v2", liodn, sata##sataNum##liodnr,\ CONFIG_SYS_MPC85xx_SATA##sataNum##_OFFSET) -#define SET_PCI_LIODN(pciNum, liodn) \ - SET_GUTS_LIODN("fsl,p4080-pcie", liodn, pex##pciNum##liodnr,\ +#define SET_PCI_LIODN(compat, pciNum, liodn) \ + SET_GUTS_LIODN(compat, liodn, pex##pciNum##liodnr,\ CONFIG_SYS_MPC85xx_PCIE##pciNum##_OFFSET) /* reg nodes for DMA start @ 0x300 */ @@ -85,13 +85,13 @@ extern void fdt_fixup_liodn(void *blob); #define SET_QMAN_LIODN(liodn) \ SET_LIODN_ENTRY_1("fsl,qman", liodn, offsetof(ccsr_qman_t, liodnr) + \ - CONFIG_SYS_FSL_CORENET_QMAN_OFFSET, \ - CONFIG_SYS_FSL_CORENET_QMAN_OFFSET) + CONFIG_SYS_FSL_QMAN_OFFSET, \ + CONFIG_SYS_FSL_QMAN_OFFSET) #define SET_BMAN_LIODN(liodn) \ SET_LIODN_ENTRY_1("fsl,bman", liodn, offsetof(ccsr_bman_t, liodnr) + \ - CONFIG_SYS_FSL_CORENET_BMAN_OFFSET, \ - CONFIG_SYS_FSL_CORENET_BMAN_OFFSET) + CONFIG_SYS_FSL_BMAN_OFFSET, \ + CONFIG_SYS_FSL_BMAN_OFFSET) #define SET_PME_LIODN(liodn) \ SET_LIODN_ENTRY_1("fsl,pme", liodn, offsetof(ccsr_pme_t, liodnr) + \ @@ -115,10 +115,18 @@ extern void fdt_fixup_liodn(void *blob); FM_PPID_RX_PORT_OFFSET(fmNum, enetNum + 16), \ CONFIG_SYS_FSL_FM##fmNum##_RX##enetNum##_10G_OFFSET) \ +/* + * handle both old and new versioned SEC properties: + * "fsl,secX.Y" became "fsl,sec-vX.Y" during development + */ #define SET_SEC_JR_LIODN_ENTRY(jrNum, liodnA, liodnB) \ SET_LIODN_ENTRY_2("fsl,sec4.0-job-ring", liodnA, liodnB,\ offsetof(ccsr_sec_t, jrliodnr[jrNum].ls) + \ CONFIG_SYS_FSL_SEC_OFFSET, \ + CONFIG_SYS_FSL_SEC_OFFSET + 0x1000 + 0x1000 * jrNum), \ + SET_LIODN_ENTRY_2("fsl,sec-v4.0-job-ring", liodnA, liodnB,\ + offsetof(ccsr_sec_t, jrliodnr[jrNum].ls) + \ + CONFIG_SYS_FSL_SEC_OFFSET, \ CONFIG_SYS_FSL_SEC_OFFSET + 0x1000 + 0x1000 * jrNum) /* This is a bit evil since we treat rtic param as both a string & hex value */ @@ -127,6 +135,11 @@ extern void fdt_fixup_liodn(void *blob); liodnA, \ offsetof(ccsr_sec_t, rticliodnr[0x##rtic-0xa].ls) + \ CONFIG_SYS_FSL_SEC_OFFSET, \ + CONFIG_SYS_FSL_SEC_OFFSET + 0x6100 + 0x20 * (0x##rtic-0xa)), \ + SET_LIODN_ENTRY_1("fsl,sec-v4.0-rtic-memory", \ + liodnA, \ + offsetof(ccsr_sec_t, rticliodnr[0x##rtic-0xa].ls) + \ + CONFIG_SYS_FSL_SEC_OFFSET, \ CONFIG_SYS_FSL_SEC_OFFSET + 0x6100 + 0x20 * (0x##rtic-0xa)) #define SET_SEC_DECO_LIODN_ENTRY(num, liodnA, liodnB) \ diff --git a/arch/powerpc/include/asm/fsl_pci.h b/arch/powerpc/include/asm/fsl_pci.h index 0a98bde..fc47a9f 100644 --- a/arch/powerpc/include/asm/fsl_pci.h +++ b/arch/powerpc/include/asm/fsl_pci.h @@ -1,5 +1,5 @@ /* - * Copyright 2007,2009-2010 Freescale Semiconductor, Inc. + * Copyright 2007,2009-2011 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as @@ -25,6 +25,9 @@ #include <asm/fsl_serdes.h> #include <pci.h> +#define PEX_IP_BLK_REV_2_2 0x02080202 +#define PEX_IP_BLK_REV_2_3 0x02080203 + int fsl_setup_hose(struct pci_controller *hose, unsigned long addr); int fsl_is_pci_agent(struct pci_controller *hose); void fsl_pci_config_unlock(struct pci_controller *hose); @@ -73,7 +76,8 @@ typedef struct ccsr_pci { u32 out_comp_to; /* 0x00C - PCI Outbound Completion Timeout Register */ u32 out_conf_to; /* 0x010 - PCI Configuration Timeout Register */ u32 config; /* 0x014 - PCIE CONFIG Register */ - char res2[8]; + u32 int_status; /* 0x018 - PCIE interrupt status register */ + char res2[4]; u32 pme_msg_det; /* 0x020 - PCIE PME & message detect register */ u32 pme_msg_dis; /* 0x024 - PCIE PME & message disable register */ u32 pme_msg_int_en; /* 0x028 - PCIE PME & message interrupt enable register */ @@ -83,8 +87,11 @@ typedef struct ccsr_pci { u32 block_rev2; /* 0xbfc - PCIE Block Revision register 2 */ pot_t pot[5]; /* 0xc00 - 0xc9f Outbound ATMU's 0, 1, 2, 3, and 4 */ - u32 res5[64]; - pit_t pit[3]; /* 0xda0 - 0xdff Inbound ATMU's 3, 2, and 1 */ + u32 res5[24]; + pit_t pmit; /* 0xd00 - 0xd9c Inbound ATMU's MSI */ + u32 res6[24]; + pit_t pit[4]; /* 0xd80 - 0xdff Inbound ATMU's 3, 2, 1 and 0 */ + #define PIT3 0 #define PIT2 1 #define PIT1 2 @@ -158,6 +165,11 @@ typedef struct ccsr_pci { u32 pdb_stat; /* 0xf00 - PCIE Debug Status */ char res24[252]; } ccsr_fsl_pci_t; +#define PCIE_CONFIG_PC 0x00020000 +#define PCIE_CONFIG_OB_CK 0x00002000 +#define PCIE_CONFIG_SAC 0x00000010 +#define PCIE_CONFIG_SP 0x80000002 +#define PCIE_CONFIG_SCC 0x80000001 struct fsl_pci_info { unsigned long regs; @@ -218,7 +230,9 @@ int fsl_pcie_init_board(int busno); #define FT_FSL_PCIE3_SETUP __FT_FSL_PCIE_SETUP(blob, FSL_PCIE_COMPAT, 3) #define FT_FSL_PCIE4_SETUP __FT_FSL_PCIE_SETUP(blob, FSL_PCIE_COMPAT, 4) -#if defined(CONFIG_FSL_CORENET) +#if !defined(CONFIG_PCI) +#define FT_FSL_PCI_SETUP +#elif defined(CONFIG_FSL_CORENET) #define FSL_PCIE_COMPAT "fsl,p4080-pcie" #define FT_FSL_PCI_SETUP \ FT_FSL_PCIE1_SETUP; \ diff --git a/arch/powerpc/include/asm/fsl_portals.h b/arch/powerpc/include/asm/fsl_portals.h index cb32927..e1c1212 100644 --- a/arch/powerpc/include/asm/fsl_portals.h +++ b/arch/powerpc/include/asm/fsl_portals.h @@ -1,5 +1,5 @@ /* - * Copyright 2009-2010 Freescale Semiconductor, Inc. + * Copyright 2009-2011 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -51,6 +51,7 @@ extern int get_dpaa_liodn(enum fsl_dpaa_dev dpaa_dev, u32 *liodns, int liodn_offset); extern void setup_portals(void); extern void fdt_fixup_qportals(void *blob); +extern void fdt_fixup_bportals(void *blob); extern struct qportal_info qp_info[]; extern void fdt_portal(void *blob, const char *compat, const char *container, diff --git a/arch/powerpc/include/asm/fsl_serdes.h b/arch/powerpc/include/asm/fsl_serdes.h index 85518eb..0f31af1 100644 --- a/arch/powerpc/include/asm/fsl_serdes.h +++ b/arch/powerpc/include/asm/fsl_serdes.h @@ -53,4 +53,11 @@ enum srds_prtcl { int is_serdes_configured(enum srds_prtcl device); void fsl_serdes_init(void); +#ifdef CONFIG_FSL_CORENET +int serdes_get_first_lane(enum srds_prtcl device); +#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES9 +void serdes_reset_rx(enum srds_prtcl device); +#endif +#endif + #endif /* __FSL_SERDES_H */ diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h index 6bd83ba..f85cee2 100644 --- a/arch/powerpc/include/asm/immap_85xx.h +++ b/arch/powerpc/include/asm/immap_85xx.h @@ -31,6 +31,7 @@ #include <asm/types.h> #include <asm/fsl_dma.h> #include <asm/fsl_i2c.h> +#include <asm/fsl_ifc.h> #include <asm/fsl_lbc.h> #include <asm/fsl_fman.h> @@ -1864,8 +1865,13 @@ typedef struct ccsr_gur { #define MPC85xx_PORBMSR_HA_SHIFT 16 u32 porimpscr; /* POR I/O impedance status & control */ u32 pordevsr; /* POR I/O device status regsiter */ +#if defined(CONFIG_P1017) || defined(CONFIG_P1023) +#define MPC85xx_PORDEVSR_SGMII1_DIS 0x10000000 +#define MPC85xx_PORDEVSR_SGMII2_DIS 0x08000000 +#else #define MPC85xx_PORDEVSR_SGMII1_DIS 0x20000000 #define MPC85xx_PORDEVSR_SGMII2_DIS 0x10000000 +#endif #define MPC85xx_PORDEVSR_SGMII3_DIS 0x08000000 #define MPC85xx_PORDEVSR_SGMII4_DIS 0x04000000 #define MPC85xx_PORDEVSR_SRDS2_IO_SEL 0x38000000 @@ -1873,9 +1879,17 @@ typedef struct ccsr_gur { #if defined(CONFIG_P1013) || defined(CONFIG_P1022) #define MPC85xx_PORDEVSR_IO_SEL 0x007c0000 #define MPC85xx_PORDEVSR_IO_SEL_SHIFT 18 +#elif defined(CONFIG_P1017) || defined(CONFIG_P1023) +#define MPC85xx_PORDEVSR_IO_SEL 0x00600000 +#define MPC85xx_PORDEVSR_IO_SEL_SHIFT 21 +#else +#if defined(CONFIG_P1010) +#define MPC85xx_PORDEVSR_IO_SEL 0x00600000 +#define MPC85xx_PORDEVSR_IO_SEL_SHIFT 21 #else #define MPC85xx_PORDEVSR_IO_SEL 0x00780000 #define MPC85xx_PORDEVSR_IO_SEL_SHIFT 19 +#endif /* if defined(CONFIG_P1010) */ #endif #define MPC85xx_PORDEVSR_PCI2_ARB 0x00040000 #define MPC85xx_PORDEVSR_PCI1_ARB 0x00020000 @@ -1906,10 +1920,106 @@ typedef struct ccsr_gur { u32 gpindr; /* General-purpose input data */ u8 res5[12]; u32 pmuxcr; /* Alt. function signal multiplex control */ +#if defined(CONFIG_P1010) || defined(CONFIG_P1014) +#define MPC85xx_PMUXCR_TSEC1_0_1588 0x40000000 +#define MPC85xx_PMUXCR_TSEC1_0_RES 0xC0000000 +#define MPC85xx_PMUXCR_TSEC1_1_1588_TRIG 0x10000000 +#define MPC85xx_PMUXCR_TSEC1_1_GPIO_12 0x20000000 +#define MPC85xx_PMUXCR_TSEC1_1_RES 0x30000000 +#define MPC85xx_PMUXCR_TSEC1_2_DMA 0x04000000 +#define MPC85xx_PMUXCR_TSEC1_2_GPIO 0x08000000 +#define MPC85xx_PMUXCR_TSEC1_2_RES 0x0C000000 +#define MPC85xx_PMUXCR_TSEC1_3_RES 0x01000000 +#define MPC85xx_PMUXCR_TSEC1_3_GPIO_15 0x02000000 +#define MPC85xx_PMUXCR_IFC_ADDR16_SDHC 0x00400000 +#define MPC85xx_PMUXCR_IFC_ADDR16_USB 0x00800000 +#define MPC85xx_PMUXCR_IFC_ADDR16_IFC_CS2 0x00C00000 +#define MPC85xx_PMUXCR_IFC_ADDR17_18_SDHC 0x00100000 +#define MPC85xx_PMUXCR_IFC_ADDR17_18_USB 0x00200000 +#define MPC85xx_PMUXCR_IFC_ADDR17_18_DMA 0x00300000 +#define MPC85xx_PMUXCR_IFC_ADDR19_SDHC_DATA 0x00040000 +#define MPC85xx_PMUXCR_IFC_ADDR19_USB 0x00080000 +#define MPC85xx_PMUXCR_IFC_ADDR19_DMA 0x000C0000 +#define MPC85xx_PMUXCR_IFC_ADDR20_21_SDHC_DATA 0x00010000 +#define MPC85xx_PMUXCR_IFC_ADDR20_21_USB 0x00020000 +#define MPC85xx_PMUXCR_IFC_ADDR20_21_RES 0x00030000 +#define MPC85xx_PMUXCR_IFC_ADDR22_SDHC 0x00004000 +#define MPC85xx_PMUXCR_IFC_ADDR22_USB 0x00008000 +#define MPC85xx_PMUXCR_IFC_ADDR22_RES 0x0000C000 +#define MPC85xx_PMUXCR_IFC_ADDR23_SDHC 0x00001000 +#define MPC85xx_PMUXCR_IFC_ADDR23_USB 0x00002000 +#define MPC85xx_PMUXCR_IFC_ADDR23_RES 0x00003000 +#define MPC85xx_PMUXCR_IFC_ADDR24_SDHC 0x00000400 +#define MPC85xx_PMUXCR_IFC_ADDR24_USB 0x00000800 +#define MPC85xx_PMUXCR_IFC_ADDR24_RES 0x00000C00 +#define MPC85xx_PMUXCR_IFC_PAR_PERR_RES 0x00000300 +#define MPC85xx_PMUXCR_IFC_PAR_PERR_USB 0x00000200 +#define MPC85xx_PMUXCR_LCLK_RES 0x00000040 +#define MPC85xx_PMUXCR_LCLK_USB 0x00000080 +#define MPC85xx_PMUXCR_LCLK_IFC_CS3 0x000000C0 +#define MPC85xx_PMUXCR_SPI_RES 0x00000030 +#define MPC85xx_PMUXCR_SPI_GPIO 0x00000020 +#define MPC85xx_PMUXCR_CAN1_UART 0x00000004 +#define MPC85xx_PMUXCR_CAN1_TDM 0x00000008 +#define MPC85xx_PMUXCR_CAN1_RES 0x0000000C +#define MPC85xx_PMUXCR_CAN2_UART 0x00000001 +#define MPC85xx_PMUXCR_CAN2_TDM 0x00000002 +#define MPC85xx_PMUXCR_CAN2_RES 0x00000003 +#endif #define MPC85xx_PMUXCR_SD_DATA 0x80000000 #define MPC85xx_PMUXCR_SDHC_CD 0x40000000 #define MPC85xx_PMUXCR_SDHC_WP 0x20000000 +#define MPC85xx_PMUXCR_ELBC_OFF_USB2_ON 0x01000000 +#define MPC85xx_PMUXCR_TDM_ENA 0x00800000 +#define MPC85xx_PMUXCR_QE0 0x00008000 +#define MPC85xx_PMUXCR_QE1 0x00004000 +#define MPC85xx_PMUXCR_QE2 0x00002000 +#define MPC85xx_PMUXCR_QE3 0x00001000 +#define MPC85xx_PMUXCR_QE4 0x00000800 +#define MPC85xx_PMUXCR_QE5 0x00000400 +#define MPC85xx_PMUXCR_QE6 0x00000200 +#define MPC85xx_PMUXCR_QE7 0x00000100 +#define MPC85xx_PMUXCR_QE8 0x00000080 +#define MPC85xx_PMUXCR_QE9 0x00000040 +#define MPC85xx_PMUXCR_QE10 0x00000020 +#define MPC85xx_PMUXCR_QE11 0x00000010 +#define MPC85xx_PMUXCR_QE12 0x00000008 +#if defined(CONFIG_P1013) || defined(CONFIG_P1022) +#define MPC85xx_PMUXCR_TDM_MASK 0x0001cc00 +#define MPC85xx_PMUXCR_TDM 0x00014800 +#define MPC85xx_PMUXCR_SPI_MASK 0x00600000 +#define MPC85xx_PMUXCR_SPI 0x00000000 +#endif u32 pmuxcr2; /* Alt. function signal multiplex control 2 */ +#if defined(CONFIG_P1010) || defined(CONFIG_P1014) +#define MPC85xx_PMUXCR2_UART_GPIO 0x40000000 +#define MPC85xx_PMUXCR2_UART_TDM 0x80000000 +#define MPC85xx_PMUXCR2_UART_RES 0xC0000000 +#define MPC85xx_PMUXCR2_IRQ2_TRIG_IN 0x10000000 +#define MPC85xx_PMUXCR2_IRQ2_RES 0x30000000 +#define MPC85xx_PMUXCR2_IRQ3_SRESET 0x04000000 +#define MPC85xx_PMUXCR2_IRQ3_RES 0x0C000000 +#define MPC85xx_PMUXCR2_GPIO01_DRVVBUS 0x01000000 +#define MPC85xx_PMUXCR2_GPIO01_RES 0x03000000 +#define MPC85xx_PMUXCR2_GPIO23_CKSTP 0x00400000 +#define MPC85xx_PMUXCR2_GPIO23_RES 0x00800000 +#define MPC85xx_PMUXCR2_GPIO23_USB 0x00C00000 +#define MPC85xx_PMUXCR2_GPIO4_MCP 0x00100000 +#define MPC85xx_PMUXCR2_GPIO4_RES 0x00200000 +#define MPC85xx_PMUXCR2_GPIO4_CLK_OUT 0x00300000 +#define MPC85xx_PMUXCR2_GPIO5_UDE 0x00040000 +#define MPC85xx_PMUXCR2_GPIO5_RES 0x00080000 +#define MPC85xx_PMUXCR2_READY_ASLEEP 0x00020000 +#define MPC85xx_PMUXCR2_DDR_ECC_MUX 0x00010000 +#define MPC85xx_PMUXCR2_DEBUG_PORT_EXPOSE 0x00008000 +#define MPC85xx_PMUXCR2_POST_EXPOSE 0x00004000 +#define MPC85xx_PMUXCR2_DEBUG_MUX_SEL_USBPHY 0x00002000 +#define MPC85xx_PMUXCR2_PLL_LKDT_EXPOSE 0x00001000 +#endif +#if defined(CONFIG_P1013) || defined(CONFIG_P1022) +#define MPC85xx_PMUXCR2_ETSECUSB_MASK 0x001f1000 +#define MPC85xx_PMUXCR2_USB 0x00150000 +#endif u8 res6[8]; u32 devdisr; /* Device disable control */ #define MPC85xx_DEVDISR_PCI1 0x80000000 @@ -1942,32 +2052,43 @@ typedef struct ccsr_gur { u8 res9[12]; u32 pvr; /* Processor version */ u32 svr; /* System version */ - u8 res10a[8]; + u8 res10[8]; u32 rstcr; /* Reset control */ #if defined(CONFIG_MPC8568)||defined(CONFIG_MPC8569) - u8 res10b[76]; + u8 res11a[76]; par_io_t qe_par_io[7]; - u8 res10c[1600]; + u8 res11b[1600]; +#elif defined(CONFIG_P1012) || defined(CONFIG_P1016) || \ + defined(CONFIG_P1021) || defined(CONFIG_P1025) + u8 res11a[12]; + u32 iovselsr; + u8 res11b[60]; + par_io_t qe_par_io[3]; + u8 res11c[1496]; #else - u8 res10b[1868]; + u8 res11a[1868]; #endif u32 clkdvdr; /* Clock Divide register */ - u8 res10d[1532]; + u8 res12[1532]; u32 clkocr; /* Clock out select */ - u8 res11[12]; + u8 res13[12]; u32 ddrdllcr; /* DDR DLL control */ - u8 res12[12]; + u8 res14[12]; u32 lbcdllcr; /* LBC DLL control */ - u8 res13[248]; + u8 res15[248]; u32 lbiuiplldcr0; /* LBIU PLL Debug Reg 0 */ u32 lbiuiplldcr1; /* LBIU PLL Debug Reg 1 */ u32 ddrioovcr; /* DDR IO Override Control */ u32 tsec12ioovcr; /* eTSEC 1/2 IO override control */ u32 tsec34ioovcr; /* eTSEC 3/4 IO override control */ - u8 res15[61648]; + u8 res16[52]; + u32 sdhcdcr; /* SDHC debug control register */ + u8 res17[61592]; } ccsr_gur_t; #endif +#define SDHCDCR_CD_INV 0x80000000 /* invert SDHC card detect */ + typedef struct serdes_corenet { struct { u32 rstctl; /* Reset Control Register */ @@ -1980,6 +2101,7 @@ typedef struct serdes_corenet { #define SRDS_PLLCR0_RFCK_SEL_100 0x00000000 #define SRDS_PLLCR0_RFCK_SEL_125 0x10000000 #define SRDS_PLLCR0_RFCK_SEL_156_25 0x20000000 +#define SRDS_PLLCR0_RFCK_SEL_150 0x30000000 #define SRDS_PLLCR0_FRATE_SEL_MASK 0x00030000 #define SRDS_PLLCR0_FRATE_SEL_5 0x00000000 #define SRDS_PLLCR0_FRATE_SEL_6_25 0x00010000 @@ -2016,6 +2138,9 @@ typedef struct serdes_corenet { #define SRDS_TECR0_TEQ_TYPE_2LVL 0x10000000 u32 res3; u32 ttlcr0; /* Transition Tracking Loop Ctrl 0 */ +#define SRDS_TTLCR0_FLT_SEL_MASK 0x3f000000 +#define SRDS_TTLCR0_FLT_SEL_750PPM 0x03000000 +#define SRDS_TTLCR0_PM_DIS 0x00004000 u32 res4[7]; } lane[24]; u32 res6[384]; @@ -2164,6 +2289,13 @@ typedef struct ccsr_pme { u8 res4[0x400]; } ccsr_pme_t; +typedef struct ccsr_usb_phy { + u8 res0[0x18]; + u32 usb_enable_override; + u8 res[0xe4]; +} ccsr_usb_phy_t; +#define CONFIG_SYS_FSL_USB_ENABLE_OVERRIDE 1 + #ifdef CONFIG_FSL_CORENET #define CONFIG_SYS_FSL_CORENET_CCM_OFFSET 0x0000 #define CONFIG_SYS_MPC85xx_DDR_OFFSET 0x8000 @@ -2186,12 +2318,14 @@ typedef struct ccsr_pme { #define CONFIG_SYS_MPC85xx_USB1_OFFSET 0x210000 #define CONFIG_SYS_MPC85xx_USB2_OFFSET 0x211000 #define CONFIG_SYS_MPC85xx_USB_OFFSET CONFIG_SYS_MPC85xx_USB1_OFFSET +#define CONFIG_SYS_MPC85xx_USB1_PHY_OFFSET 0x214000 +#define CONFIG_SYS_MPC85xx_USB2_PHY_OFFSET 0x214100 #define CONFIG_SYS_MPC85xx_SATA1_OFFSET 0x220000 #define CONFIG_SYS_MPC85xx_SATA2_OFFSET 0x221000 #define CONFIG_SYS_FSL_SEC_OFFSET 0x300000 #define CONFIG_SYS_FSL_CORENET_PME_OFFSET 0x316000 -#define CONFIG_SYS_FSL_CORENET_QMAN_OFFSET 0x318000 -#define CONFIG_SYS_FSL_CORENET_BMAN_OFFSET 0x31a000 +#define CONFIG_SYS_FSL_QMAN_OFFSET 0x318000 +#define CONFIG_SYS_FSL_BMAN_OFFSET 0x31a000 #define CONFIG_SYS_FSL_FM1_OFFSET 0x400000 #define CONFIG_SYS_FSL_FM1_RX0_1G_OFFSET 0x488000 #define CONFIG_SYS_FSL_FM1_RX1_1G_OFFSET 0x489000 @@ -2227,6 +2361,7 @@ typedef struct ccsr_pme { #define CONFIG_SYS_MPC85xx_GPIO_OFFSET 0xF000 #define CONFIG_SYS_MPC85xx_SATA1_OFFSET 0x18000 #define CONFIG_SYS_MPC85xx_SATA2_OFFSET 0x19000 +#define CONFIG_SYS_MPC85xx_IFC_OFFSET 0x1e000 #define CONFIG_SYS_MPC85xx_L2_OFFSET 0x20000 #define CONFIG_SYS_MPC85xx_DMA_OFFSET 0x21000 #define CONFIG_SYS_MPC85xx_USB_OFFSET 0x22000 @@ -2240,6 +2375,12 @@ typedef struct ccsr_pme { #define CONFIG_SYS_MPC85xx_SERDES2_OFFSET 0xE3100 #define CONFIG_SYS_MPC85xx_SERDES1_OFFSET 0xE3000 #define CONFIG_SYS_MPC85xx_CPM_OFFSET 0x80000 +#define CONFIG_SYS_FSL_QMAN_OFFSET 0x88000 +#define CONFIG_SYS_FSL_BMAN_OFFSET 0x8a000 +#define CONFIG_SYS_FSL_FM1_OFFSET 0x100000 +#define CONFIG_SYS_FSL_FM1_RX0_1G_OFFSET 0x188000 +#define CONFIG_SYS_FSL_FM1_RX1_1G_OFFSET 0x189000 +#define CONFIG_SYS_FSL_FM1_DTSEC1_OFFSET 0x1e0000 #endif #define CONFIG_SYS_MPC85xx_PIC_OFFSET 0x40000 @@ -2247,10 +2388,10 @@ typedef struct ccsr_pme { #define CONFIG_SYS_FSL_CPC_ADDR \ (CONFIG_SYS_CCSRBAR + CONFIG_SYS_FSL_CPC_OFFSET) -#define CONFIG_SYS_FSL_CORENET_QMAN_ADDR \ - (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_QMAN_OFFSET) -#define CONFIG_SYS_FSL_CORENET_BMAN_ADDR \ - (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_BMAN_OFFSET) +#define CONFIG_SYS_FSL_QMAN_ADDR \ + (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_QMAN_OFFSET) +#define CONFIG_SYS_FSL_BMAN_ADDR \ + (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_BMAN_OFFSET) #define CONFIG_SYS_FSL_CORENET_PME_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_PME_OFFSET) #define CONFIG_SYS_MPC85xx_GUTS_ADDR \ @@ -2269,6 +2410,8 @@ typedef struct ccsr_pme { (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_DDR2_OFFSET) #define CONFIG_SYS_LBC_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_LBC_OFFSET) +#define CONFIG_SYS_IFC_ADDR \ + (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_IFC_OFFSET) #define CONFIG_SYS_MPC85xx_ESPI_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_ESPI_OFFSET) #define CONFIG_SYS_MPC85xx_PCIX_ADDR \ @@ -2299,6 +2442,10 @@ typedef struct ccsr_pme { (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_SERDES_OFFSET) #define CONFIG_SYS_MPC85xx_USB_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_USB_OFFSET) +#define CONFIG_SYS_MPC85xx_USB1_PHY_ADDR \ + (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_USB1_PHY_OFFSET) +#define CONFIG_SYS_MPC85xx_USB2_PHY_ADDR \ + (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_USB2_PHY_OFFSET) #define CONFIG_SYS_FSL_SEC_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_SEC_OFFSET) #define CONFIG_SYS_FSL_FM1_ADDR \ diff --git a/arch/powerpc/include/asm/immap_qe.h b/arch/powerpc/include/asm/immap_qe.h index 531cfc8..9be9dca 100644 --- a/arch/powerpc/include/asm/immap_qe.h +++ b/arch/powerpc/include/asm/immap_qe.h @@ -3,7 +3,7 @@ * The Internal Memory Map for devices with QE on them. This * is the superset of all QE devices (8360, etc.). * - * Copyright (c) 2006-2009 Freescale Semiconductor, Inc. + * Copyright (c) 2006-2009, 2011 Freescale Semiconductor, Inc. * Author: Shlomi Gridih <gridish@freescale.com> * * This program is free software; you can redistribute it and/or modify it @@ -15,8 +15,19 @@ #ifndef __IMMAP_QE_H__ #define __IMMAP_QE_H__ -/* QE I-RAM -*/ +#ifdef CONFIG_MPC83xx +#if defined(CONFIG_MPC8360) +#define QE_MURAM_SIZE 0xc000UL +#define MAX_QE_RISC 2 +#define QE_NUM_OF_SNUM 28 +#elif defined(CONFIG_MPC832x) +#define QE_MURAM_SIZE 0x4000UL +#define MAX_QE_RISC 1 +#define QE_NUM_OF_SNUM 28 +#endif +#endif + +/* QE I-RAM */ typedef struct qe_iram { u32 iadd; /* I-RAM Address Register */ u32 idata; /* I-RAM Data Register */ @@ -25,8 +36,7 @@ typedef struct qe_iram { u8 res1[0x70]; } __attribute__ ((packed)) qe_iram_t; -/* QE Interrupt Controller -*/ +/* QE Interrupt Controller */ typedef struct qe_ic { u32 qicr; u32 qivec; @@ -49,8 +59,7 @@ typedef struct qe_ic { u8 res3[0x1C]; } __attribute__ ((packed)) qe_ic_t; -/* Communications Processor -*/ +/* Communications Processor */ typedef struct cp_qe { u32 cecr; /* QE command register */ u32 ceccr; /* QE controller configuration register */ @@ -87,8 +96,7 @@ typedef struct cp_qe { u8 res13[0x280]; } __attribute__ ((packed)) cp_qe_t; -/* QE Multiplexer -*/ +/* QE Multiplexer */ typedef struct qe_mux { u32 cmxgcr; /* CMX general clock route register */ u32 cmxsi1cr_l; /* CMX SI1 clock route low register */ @@ -102,8 +110,7 @@ typedef struct qe_mux { u8 res0[0x1C]; } __attribute__ ((packed)) qe_mux_t; -/* QE Timers -*/ +/* QE Timers */ typedef struct qe_timers { u8 gtcfr1; /* Timer 1 2 global configuration register */ u8 res0[0x3]; @@ -133,8 +140,7 @@ typedef struct qe_timers { u8 res2[0x46]; } __attribute__ ((packed)) qe_timers_t; -/* BRG -*/ +/* BRG */ typedef struct qe_brg { u32 brgc1; /* BRG1 configuration register */ u32 brgc2; /* BRG2 configuration register */ @@ -155,8 +161,7 @@ typedef struct qe_brg { u8 res0[0x40]; } __attribute__ ((packed)) qe_brg_t; -/* SPI -*/ +/* SPI */ typedef struct spi { u8 res0[0x20]; u32 spmode; /* SPI mode register */ @@ -174,8 +179,7 @@ typedef struct spi { u8 res7[0x8]; } __attribute__ ((packed)) spi_t; -/* SI -*/ +/* SI */ typedef struct si1 { u16 siamr1; /* SI1 TDMA mode register */ u16 sibmr1; /* SI1 TDMB mode register */ @@ -222,16 +226,14 @@ typedef struct si1 { u8 res9[0xBB]; } __attribute__ ((packed)) si1_t; -/* SI Routing Tables -*/ +/* SI Routing Tables */ typedef struct sir { u8 tx[0x400]; u8 rx[0x400]; u8 res0[0x800]; } __attribute__ ((packed)) sir_t; -/* USB Controller. -*/ +/* USB Controller. */ typedef struct usb_ctlr { u8 usb_usmod; u8 usb_usadr; @@ -253,8 +255,7 @@ typedef struct usb_ctlr { u8 res6[0x22]; } __attribute__ ((packed)) usb_t; -/* MCC -*/ +/* MCC */ typedef struct mcc { u32 mcce; /* MCC event register */ u32 mccm; /* MCC mask register */ @@ -263,8 +264,7 @@ typedef struct mcc { u8 res0[0xF0]; } __attribute__ ((packed)) mcc_t; -/* QE UCC Slow -*/ +/* QE UCC Slow */ typedef struct ucc_slow { u32 gumr_l; /* UCCx general mode register (low) */ u32 gumr_h; /* UCCx general mode register (high) */ @@ -368,8 +368,7 @@ typedef struct ucc_ethernet { u8 res5[0x200 - 0x1c4]; } __attribute__ ((packed)) uec_t; -/* QE UCC Fast -*/ +/* QE UCC Fast */ typedef struct ucc_fast { u32 gumr; /* UCCx general mode register */ u32 upsmr; /* UCCx protocol-specific mode register */ @@ -403,8 +402,7 @@ typedef struct ucc_fast { uec_t ucc_eth; } __attribute__ ((packed)) ucc_fast_t; -/* QE UCC -*/ +/* QE UCC */ typedef struct ucc_common { u8 res1[0x90]; u8 guemr; @@ -419,8 +417,7 @@ typedef struct ucc { }; } __attribute__ ((packed)) ucc_t; -/* MultiPHY UTOPIA POS Controllers (UPC) -*/ +/* MultiPHY UTOPIA POS Controllers (UPC) */ typedef struct upc { u32 upgcr; /* UTOPIA/POS general configuration register */ u32 uplpa; /* UTOPIA/POS last PHY address */ @@ -476,8 +473,7 @@ typedef struct upc { u8 res2[0x150]; } __attribute__ ((packed)) upc_t; -/* SDMA -*/ +/* SDMA */ typedef struct sdma { u32 sdsr; /* Serial DMA status register */ u32 sdmr; /* Serial DMA mode register */ @@ -497,8 +493,7 @@ typedef struct sdma { u8 res2[0x38]; } __attribute__ ((packed)) sdma_t; -/* Debug Space -*/ +/* Debug Space */ typedef struct dbg { u32 bpdcr; /* Breakpoint debug command register */ u32 bpdsr; /* Breakpoint debug status register */ @@ -582,40 +577,9 @@ typedef struct qe_immap { u8 res14[0x300]; u8 res15[0x3A00]; u8 res16[0x8000]; /* 0x108000 - 0x110000 */ -#if defined(CONFIG_MPC8568) - u8 muram[0x10000]; /* 0x1_0000 - 0x2_0000 Multi-user RAM */ - u8 res17[0x20000]; /* 0x2_0000 - 0x4_0000 */ -#elif defined(CONFIG_MPC8569) - u8 muram[0x20000]; /* 0x1_0000 - 0x3_0000 Multi-user RAM */ - u8 res17[0x10000]; /* 0x3_0000 - 0x4_0000 */ -#else - u8 muram[0xC000]; /* 0x110000 - 0x11C000 Multi-user RAM */ - u8 res17[0x24000]; /* 0x11C000 - 0x140000 */ - u8 res18[0xC0000]; /* 0x140000 - 0x200000 */ -#endif + u8 muram[QE_MURAM_SIZE]; } __attribute__ ((packed)) qe_map_t; extern qe_map_t *qe_immr; -#if defined(CONFIG_MPC8568) -#define QE_MURAM_SIZE 0x10000UL -#elif defined(CONFIG_MPC8569) -#define QE_MURAM_SIZE 0x20000UL -#elif defined(CONFIG_MPC8360) -#define QE_MURAM_SIZE 0xc000UL -#elif defined(CONFIG_MPC832x) -#define QE_MURAM_SIZE 0x4000UL -#endif - -#if defined(CONFIG_MPC8323) -#define MAX_QE_RISC 1 -#define QE_NUM_OF_SNUM 28 -#elif defined(CONFIG_MPC8569) -#define MAX_QE_RISC 4 -#define QE_NUM_OF_SNUM 46 -#else -#define MAX_QE_RISC 2 -#define QE_NUM_OF_SNUM 28 -#endif - #endif /* __IMMAP_QE_H__ */ diff --git a/arch/powerpc/include/asm/io.h b/arch/powerpc/include/asm/io.h index 4ddad26..56ac9fe 100644 --- a/arch/powerpc/include/asm/io.h +++ b/arch/powerpc/include/asm/io.h @@ -175,7 +175,10 @@ extern inline int in_8(const volatile unsigned char __iomem *addr) extern inline void out_8(volatile unsigned char __iomem *addr, int val) { - __asm__ __volatile__("stb%U0%X0 %1,%0; eieio" : "=m" (*addr) : "r" (val)); + __asm__ __volatile__("sync;\n" + "stb%U0%X0 %1,%0;\n" + : "=m" (*addr) + : "r" (val)); } extern inline int in_le16(const volatile unsigned short __iomem *addr) diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index fcee1a2..f5bf4dd 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -1048,12 +1048,24 @@ #define SVR_P1013_E 0x80EF00 #define SVR_P1014 0x80F101 #define SVR_P1014_E 0x80F901 +#define SVR_P1015 0x80E502 +#define SVR_P1015_E 0x80ED02 +#define SVR_P1016 0x80E503 +#define SVR_P1016_E 0x80ED03 +#define SVR_P1017 0x80F700 +#define SVR_P1017_E 0x80FF00 #define SVR_P1020 0x80E400 #define SVR_P1020_E 0x80EC00 #define SVR_P1021 0x80E401 #define SVR_P1021_E 0x80EC01 #define SVR_P1022 0x80E600 #define SVR_P1022_E 0x80EE00 +#define SVR_P1023 0x80F600 +#define SVR_P1023_E 0x80FE00 +#define SVR_P1024 0x80E402 +#define SVR_P1024_E 0x80EC02 +#define SVR_P1025 0x80E403 +#define SVR_P1025_E 0x80EC03 #define SVR_P2010 0x80E300 #define SVR_P2010_E 0x80EB00 #define SVR_P2020 0x80E200 diff --git a/arch/powerpc/lib/board.c b/arch/powerpc/lib/board.c index 4719f8c..aaa5add 100644 --- a/arch/powerpc/lib/board.c +++ b/arch/powerpc/lib/board.c @@ -186,6 +186,12 @@ int __board_flash_wp_on(void) } int board_flash_wp_on(void) __attribute__((weak, alias("__board_flash_wp_on"))); +void __cpu_secondary_init_r(void) +{ +} +void cpu_secondary_init_r(void) +__attribute__((weak, alias("__cpu_secondary_init_r"))); + static int init_func_ram (void) { #ifdef CONFIG_BOARD_TYPES @@ -453,9 +459,13 @@ void board_init_f (ulong bootflag) debug ("Top of RAM usable for U-Boot at: %08lx\n", addr); #ifdef CONFIG_LCD +#ifdef CONFIG_FB_ADDR + gd->fb_base = CONFIG_FB_ADDR; +#else /* reserve memory for LCD display (always full pages) */ addr = lcd_setmem (addr); gd->fb_base = addr; +#endif /* CONFIG_FB_ADDR */ #endif /* CONFIG_LCD */ #if defined(CONFIG_VIDEO) && defined(CONFIG_8xx) @@ -798,6 +808,14 @@ void board_init_r (gd_t *id, ulong dest_addr) env_relocate (); /* + * after non-volatile devices & environment is setup and cpu code have + * another round to deal with any initialization that might require + * full access to the environment or loading of some image (firmware) + * from a non-volatile device + */ + cpu_secondary_init_r(); + + /* * Fill in missing fields of bd_info. * We do this here, where we have "normal" access to the * environment; we used to do this still running from ROM, diff --git a/arch/powerpc/lib/bootcount.c b/arch/powerpc/lib/bootcount.c index 07ef28d..f9ce539 100644 --- a/arch/powerpc/lib/bootcount.c +++ b/arch/powerpc/lib/bootcount.c @@ -51,7 +51,7 @@ #define CONFIG_SYS_BOOTCOUNT_ADDR (CONFIG_SYS_IMMR + CPM_BOOTCOUNT_ADDR) #endif /* defined(CONFIG_MPC8260) */ -#if defined(CONFIG_MPC8360) +#if defined(CONFIG_QE) #include <asm/immap_qe.h> #define CONFIG_SYS_BOOTCOUNT_ADDR (CONFIG_SYS_IMMR + 0x110000 + \ diff --git a/arch/powerpc/lib/bootm.c b/arch/powerpc/lib/bootm.c index 116d81b..e01787d 100644 --- a/arch/powerpc/lib/bootm.c +++ b/arch/powerpc/lib/bootm.c @@ -33,6 +33,7 @@ #include <bzlib.h> #include <environment.h> #include <asm/byteorder.h> +#include <asm/mp.h> #if defined(CONFIG_OF_LIBFDT) #include <fdt.h> @@ -95,7 +96,7 @@ static void boot_jump_linux(bootm_headers_t *images) debug (" Booting using OF flat tree...\n"); WATCHDOG_RESET (); (*kernel) ((bd_t *)of_flat_tree, 0, 0, EPAPR_MAGIC, - CONFIG_SYS_BOOTMAPSZ, 0, 0); + getenv_bootm_mapsize(), 0, 0); /* does not return */ } else #endif @@ -166,6 +167,10 @@ void arch_lmb_reserve(struct lmb *lmb) sp -= 4096; lmb_reserve(lmb, sp, (CONFIG_SYS_SDRAM_BASE + get_effective_memsize() - sp)); +#ifdef CONFIG_MP + cpu_mp_lmb_reserve(lmb); +#endif + return ; } @@ -181,7 +186,6 @@ static void boot_prep_linux(void) static int boot_cmdline_linux(bootm_headers_t *images) { - ulong bootmap_base = getenv_bootm_low(); ulong of_size = images->ft_len; struct lmb *lmb = &images->lmb; ulong *cmd_start = &images->cmdline_start; @@ -191,7 +195,7 @@ static int boot_cmdline_linux(bootm_headers_t *images) if (!of_size) { /* allocate space and init command line */ - ret = boot_get_cmdline (lmb, cmd_start, cmd_end, bootmap_base); + ret = boot_get_cmdline (lmb, cmd_start, cmd_end); if (ret) { puts("ERROR with allocation of cmdline\n"); return ret; @@ -203,7 +207,6 @@ static int boot_cmdline_linux(bootm_headers_t *images) static int boot_bd_t_linux(bootm_headers_t *images) { - ulong bootmap_base = getenv_bootm_low(); ulong of_size = images->ft_len; struct lmb *lmb = &images->lmb; bd_t **kbd = &images->kbd; @@ -212,7 +215,7 @@ static int boot_bd_t_linux(bootm_headers_t *images) if (!of_size) { /* allocate space for kernel copy of board info */ - ret = boot_get_kbd (lmb, kbd, bootmap_base); + ret = boot_get_kbd (lmb, kbd); if (ret) { puts("ERROR with allocation of kernel bd\n"); return ret; @@ -230,13 +233,16 @@ static int boot_body_linux(bootm_headers_t *images) ulong *initrd_start = &images->initrd_start; ulong *initrd_end = &images->initrd_end; #if defined(CONFIG_OF_LIBFDT) - ulong bootmap_base = getenv_bootm_low(); ulong of_size = images->ft_len; char **of_flat_tree = &images->ft_addr; #endif int ret; +#if defined(CONFIG_OF_LIBFDT) + boot_fdt_add_mem_rsv_regions(lmb, *of_flat_tree); +#endif + /* allocate space and init command line */ ret = boot_cmdline_linux(images); if (ret) @@ -252,8 +258,8 @@ static int boot_body_linux(bootm_headers_t *images) if (ret) return ret; -#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_SYS_BOOTMAPSZ) - ret = boot_relocate_fdt(lmb, bootmap_base, of_flat_tree, &of_size); +#if defined(CONFIG_OF_LIBFDT) + ret = boot_relocate_fdt(lmb, of_flat_tree, &of_size); if (ret) return ret; @@ -291,7 +297,7 @@ static int boot_body_linux(bootm_headers_t *images) if (*initrd_start && *initrd_end) fdt_initrd(*of_flat_tree, *initrd_start, *initrd_end, 1); } -#endif /* CONFIG_OF_LIBFDT && CONFIG_SYS_BOOTMAPSZ */ +#endif /* CONFIG_OF_LIBFDT */ return 0; } diff --git a/arch/sh/config.mk b/arch/sh/config.mk index cd851f5..07ff8b9 100644 --- a/arch/sh/config.mk +++ b/arch/sh/config.mk @@ -23,17 +23,11 @@ CROSS_COMPILE ?= sh4-linux- -STANDALONE_LOAD_ADDR = 0x8C000000 +CONFIG_STANDALONE_LOAD_ADDR ?= 0x8C000000 ifeq ($(CPU),sh2) -STANDALONE_LOAD_ADDR += -EB +CONFIG_STANDALONE_LOAD_ADDR += -EB endif PLATFORM_CPPFLAGS += -DCONFIG_SH -D__SH__ PLATFORM_LDFLAGS += -e $(CONFIG_SYS_TEXT_BASE) --defsym reloc_dst=$(CONFIG_SYS_TEXT_BASE) LDFLAGS_FINAL = --gc-sections - -ifdef CONFIG_SYS_LDSCRIPT -LDSCRIPT := $(subst ",,$(CONFIG_SYS_LDSCRIPT)) -else -LDSCRIPT := $(SRCTREE)/$(CPUDIR)/u-boot.lds -endif diff --git a/arch/sparc/config.mk b/arch/sparc/config.mk index 4de6515..cae7478 100644 --- a/arch/sparc/config.mk +++ b/arch/sparc/config.mk @@ -23,6 +23,6 @@ CROSS_COMPILE ?= sparc-elf- -STANDALONE_LOAD_ADDR = 0x00000000 -L $(gcclibdir) -T sparc.lds +CONFIG_STANDALONE_LOAD_ADDR ?= 0x00000000 -L $(gcclibdir) -T sparc.lds PLATFORM_CPPFLAGS += -DCONFIG_SPARC -D__sparc__ diff --git a/arch/sparc/cpu/leon2/cpu_init.c b/arch/sparc/cpu/leon2/cpu_init.c index a24f778..795c7d7 100644 --- a/arch/sparc/cpu/leon2/cpu_init.c +++ b/arch/sparc/cpu/leon2/cpu_init.c @@ -47,9 +47,9 @@ struct { * initialize a bunch of registers. * * Run from FLASH/PROM: - * - until memory controller is set up, only registers avaiable + * - until memory controller is set up, only registers available * - no global variables available for writing - * - constants avaiable + * - constants available */ void cpu_init_f(void) diff --git a/arch/sparc/cpu/leon3/cpu_init.c b/arch/sparc/cpu/leon3/cpu_init.c index be22ec2..cba9d0e 100644 --- a/arch/sparc/cpu/leon3/cpu_init.c +++ b/arch/sparc/cpu/leon3/cpu_init.c @@ -57,9 +57,9 @@ struct { * initialize a bunch of registers. * * Run from FLASH/PROM: - * - until memory controller is set up, only registers avaiable + * - until memory controller is set up, only registers available * - no global variables available for writing - * - constants avaiable + * - constants available */ void cpu_init_f(void) diff --git a/arch/i386/config.mk b/arch/x86/config.mk index 47e0fb4..ee23c9f 100644 --- a/arch/i386/config.mk +++ b/arch/x86/config.mk @@ -21,7 +21,7 @@ # MA 02111-1307 USA # -STANDALONE_LOAD_ADDR = 0x40000 +CONFIG_STANDALONE_LOAD_ADDR ?= 0x40000 PLATFORM_CPPFLAGS += -fno-strict-aliasing PLATFORM_CPPFLAGS += -Wstrict-prototypes @@ -39,4 +39,3 @@ PLATFORM_RELFLAGS += -ffunction-sections -fvisibility=hidden PLATFORM_LDFLAGS += --emit-relocs -Bsymbolic -Bsymbolic-functions LDFLAGS_FINAL += --gc-sections -pie -LDSCRIPT := $(SRCTREE)/$(CPUDIR)/u-boot.lds diff --git a/arch/i386/cpu/Makefile b/arch/x86/cpu/Makefile index ddde83c..ddde83c 100644 --- a/arch/i386/cpu/Makefile +++ b/arch/x86/cpu/Makefile diff --git a/arch/i386/cpu/config.mk b/arch/x86/cpu/config.mk index 9b2e2c9..d1b528a 100644 --- a/arch/i386/cpu/config.mk +++ b/arch/x86/cpu/config.mk @@ -23,7 +23,7 @@ CROSS_COMPILE ?= i386-linux- -PLATFORM_CPPFLAGS += -DCONFIG_I386 -D__I386__ -march=i386 -Werror +PLATFORM_CPPFLAGS += -DCONFIG_X86 -D__I386__ -march=i386 -Werror # DO NOT MODIFY THE FOLLOWING UNLESS YOU REALLY KNOW WHAT YOU ARE DOING! LDPPFLAGS += -DRESET_SEG_START=0xffff0000 diff --git a/arch/i386/cpu/cpu.c b/arch/x86/cpu/cpu.c index 2339cd4..0c5d7c3 100644 --- a/arch/i386/cpu/cpu.c +++ b/arch/x86/cpu/cpu.c @@ -1,6 +1,9 @@ /* + * (C) Copyright 2008-2011 + * Graeme Russ, <graeme.russ@gmail.com> + * * (C) Copyright 2002 - * Daniel Engström, Omicron Ceti AB, daniel@omicron.se. + * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se> * * (C) Copyright 2002 * Sysgo Real-Time Solutions, GmbH <www.elinos.com> @@ -29,18 +32,16 @@ * MA 02111-1307 USA */ -/* - * CPU specific code - */ - #include <common.h> #include <command.h> #include <asm/processor.h> #include <asm/processor-flags.h> #include <asm/interrupt.h> -/* Constructor for a conventional segment GDT (or LDT) entry */ -/* This is a macro so it can be used in initializers */ +/* + * Constructor for a conventional segment GDT (or LDT) entry + * This is a macro so it can be used in initialisers + */ #define GDT_ENTRY(flags, base, limit) \ ((((base) & 0xff000000ULL) << (56-24)) | \ (((flags) & 0x0000f0ffULL) << 40) | \ @@ -48,10 +49,6 @@ (((base) & 0x00ffffffULL) << 16) | \ (((limit) & 0x0000ffffULL))) -/* - * Set up the GDT - */ - struct gdt_ptr { u16 len; u32 ptr; @@ -59,8 +56,10 @@ struct gdt_ptr { static void reload_gdt(void) { - /* There are machines which are known to not boot with the GDT - being 8-byte unaligned. Intel recommends 16 byte alignment. */ + /* + * There are machines which are known to not boot with the GDT + * being 8-byte unaligned. Intel recommends 16 byte alignment + */ static const u64 boot_gdt[] __attribute__((aligned(16))) = { /* CS: code, read/execute, 4 GB, base 0 */ [GDT_ENTRY_32BIT_CS] = GDT_ENTRY(0xc09b, 0, 0xfffff), @@ -86,7 +85,6 @@ static void reload_gdt(void) : : "m" (gdt) : "ecx"); } - int x86_cpu_init_f(void) { const u32 em_rst = ~X86_CR0_EM; @@ -125,7 +123,9 @@ int cpu_init_r(void) __attribute__((weak, alias("x86_cpu_init_r"))); int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { printf ("resetting ...\n"); - udelay(50000); /* wait 50 ms */ + + /* wait 50 ms */ + udelay(50000); disable_interrupts(); reset_cpu(0); @@ -136,7 +136,6 @@ int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) void flush_cache (unsigned long dummy1, unsigned long dummy2) { asm("wbinvd\n"); - return; } void __attribute__ ((regparm(0))) generate_gpf(void); @@ -150,7 +149,7 @@ asm(".globl generate_gpf\n" void __reset_cpu(ulong addr) { - printf("Resetting using i386 Triple Fault\n"); + printf("Resetting using x86 Triple Fault\n"); set_vector(13, generate_gpf); /* general protection fault handler */ set_vector(8, generate_gpf); /* double fault handler */ generate_gpf(); /* start the show */ diff --git a/arch/i386/cpu/interrupts.c b/arch/x86/cpu/interrupts.c index 1cefe02..62bcadc 100644 --- a/arch/i386/cpu/interrupts.c +++ b/arch/x86/cpu/interrupts.c @@ -1,9 +1,9 @@ /* - * (C) Copyright 2008 - * Graeme Russ, graeme.russ@gmail.com. + * (C) Copyright 2008-2011 + * Graeme Russ, <graeme.russ@gmail.com> * * (C) Copyright 2002 - * Daniel Engström, Omicron Ceti AB, daniel@omicron.se. + * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se> * * Portions of this file are derived from the Linux kernel source * Copyright (C) 1991, 1992 Linus Torvalds @@ -45,7 +45,7 @@ * read/write functions for the control registers and messing everything up. * A memory clobber would solve the problem, but would prevent reordering of * all loads stores around it, which can hurt performance. Solution is to - * use a variable and mimic reads and writes to it to enforce serialization + * use a variable and mimic reads and writes to it to enforce serialisation */ static unsigned long __force_order; diff --git a/arch/i386/cpu/resetvec.S b/arch/x86/cpu/resetvec.S index d9222dd..c690d25 100644 --- a/arch/i386/cpu/resetvec.S +++ b/arch/x86/cpu/resetvec.S @@ -1,7 +1,8 @@ /* - * U-boot - i386 Startup Code + * U-boot - x86 Startup Code * - * Copyright (c) 2002 Omicron Ceti AB, Daniel Engström <denaiel@omicron.se> + * (C) Copyright 2002 + * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se> * * See file CREDITS for list of people who contributed to this * project. diff --git a/arch/i386/cpu/sc520/Makefile b/arch/x86/cpu/sc520/Makefile index 54260b6..694b61e 100644 --- a/arch/i386/cpu/sc520/Makefile +++ b/arch/x86/cpu/sc520/Makefile @@ -33,6 +33,7 @@ LIB := $(obj)lib$(SOC).o COBJS-$(CONFIG_SYS_SC520) += sc520.o COBJS-$(CONFIG_PCI) += sc520_pci.o +COBJS-$(CONFIG_SYS_SC520_RESET) += sc520_reset.o COBJS-$(CONFIG_SYS_SC520) += sc520_sdram.o COBJS-$(CONFIG_SYS_SC520_SSI) += sc520_ssi.o COBJS-$(CONFIG_SYS_SC520_TIMER) += sc520_timer.o diff --git a/arch/i386/cpu/sc520/sc520.c b/arch/x86/cpu/sc520/sc520.c index d0c313b..8c410a2 100644 --- a/arch/i386/cpu/sc520/sc520.c +++ b/arch/x86/cpu/sc520/sc520.c @@ -1,6 +1,9 @@ /* + * (C) Copyright 2008-2011 + * Graeme Russ, <graeme.russ@gmail.com> + * * (C) Copyright 2002 - * Daniel Engstr�m, Omicron Ceti AB <daniel@omicron.se>. + * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se> * * See file CREDITS for list of people who contributed to this * project. @@ -21,9 +24,6 @@ * MA 02111-1307 USA */ -/* stuff specific for the sc520, - * but idependent of implementation */ - #include <common.h> #include <asm/io.h> #include <asm/processor-flags.h> @@ -65,13 +65,3 @@ int cpu_init_r(void) return x86_cpu_init_r(); } -#ifdef CONFIG_SYS_SC520_RESET -void reset_cpu(ulong addr) -{ - printf("Resetting using SC520 MMCR\n"); - /* Write a '1' to the SYS_RST of the RESCFG MMCR */ - writeb(0x01, &sc520_mmcr->rescfg); - - /* NOTREACHED */ -} -#endif diff --git a/arch/i386/cpu/sc520/sc520_car.S b/arch/x86/cpu/sc520/sc520_car.S index 22f5225..a33f94f 100644 --- a/arch/i386/cpu/sc520/sc520_car.S +++ b/arch/x86/cpu/sc520/sc520_car.S @@ -1,6 +1,6 @@ /* - * (C) Copyright 2010 - * Graeme Russ <graeme.russ@gmail.com>. + * (C) Copyright 2010-2011 + * Graeme Russ, <graeme.russ@gmail.com> * * See file CREDITS for list of people who contributed to this * project. @@ -21,7 +21,6 @@ * MA 02111-1307 USA */ - #include <config.h> #include <asm/processor-flags.h> #include <asm/ic/sc520.h> diff --git a/arch/i386/cpu/sc520/sc520_pci.c b/arch/x86/cpu/sc520/sc520_pci.c index b917734..8cd7ffe 100644 --- a/arch/i386/cpu/sc520/sc520_pci.c +++ b/arch/x86/cpu/sc520/sc520_pci.c @@ -1,6 +1,9 @@ /* + * (C) Copyright 2008-2011 + * Graeme Russ, <graeme.russ@gmail.com> + * * (C) Copyright 2002 - * Daniel Engström, Omicron Ceti AB <daniel@omicron.se>. + * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se> * * See file CREDITS for list of people who contributed to this * project. @@ -21,8 +24,6 @@ * MA 02111-1307 USA */ -/* stuff specific for the sc520, but independent of implementation */ - #include <common.h> #include <pci.h> #include <asm/io.h> @@ -54,7 +55,6 @@ static struct { { SC520_IRQ15, 1, 0x80 } }; - /* The interrupt used for PCI INTA-INTD */ int sc520_pci_ints[15] = { -1, -1, -1, -1, -1, -1, -1, -1, @@ -68,9 +68,8 @@ int pci_sc520_set_irq(int pci_pin, int irq) u8 tmpb; u16 tmpw; -# if 1 - printf("set_irq(): map INT%c to IRQ%d\n", pci_pin + 'A', irq); -#endif + debug("set_irq(): map INT%c to IRQ%d\n", pci_pin + 'A', irq); + if (irq < 0 || irq > 15) { return -1; /* illegal irq */ } @@ -138,5 +137,4 @@ void pci_sc520_init(struct pci_controller *hose) /* enable target memory acceses on host brige */ pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); - } diff --git a/arch/x86/cpu/sc520/sc520_reset.c b/arch/x86/cpu/sc520/sc520_reset.c new file mode 100644 index 0000000..79ef976 --- /dev/null +++ b/arch/x86/cpu/sc520/sc520_reset.c @@ -0,0 +1,40 @@ +/* + * (C) Copyright 2011 + * Graeme Russ, <graeme.russ@gmail.com> + * + * (C) Copyright 2002 + * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/ic/sc520.h> + +DECLARE_GLOBAL_DATA_PTR; + +void reset_cpu(ulong addr) +{ + printf("Resetting using SC520 MMCR\n"); + /* Write a '1' to the SYS_RST of the RESCFG MMCR */ + writeb(0x01, &sc520_mmcr->rescfg); + + /* NOTREACHED */ +} diff --git a/arch/i386/cpu/sc520/sc520_sdram.c b/arch/x86/cpu/sc520/sc520_sdram.c index d5ab55d..f3623f5 100644 --- a/arch/i386/cpu/sc520/sc520_sdram.c +++ b/arch/x86/cpu/sc520/sc520_sdram.c @@ -1,6 +1,6 @@ /* - * (C) Copyright 2010 - * Graeme Russ <graeme.russ@gmail.com>. + * (C) Copyright 2010,2011 + * Graeme Russ, <graeme.russ@gmail.com> * * See file CREDITS for list of people who contributed to this * project. diff --git a/arch/i386/cpu/sc520/sc520_ssi.c b/arch/x86/cpu/sc520/sc520_ssi.c index 6e5e346..ac58d25 100644 --- a/arch/i386/cpu/sc520/sc520_ssi.c +++ b/arch/x86/cpu/sc520/sc520_ssi.c @@ -1,6 +1,6 @@ /* * (C) Copyright 2002 - * Daniel Engström, Omicron Ceti AB <daniel@omicron.se>. + * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se> * * See file CREDITS for list of people who contributed to this * project. @@ -21,8 +21,6 @@ * MA 02111-1307 USA */ -/* stuff specific for the sc520, but independent of implementation */ - #include <common.h> #include <asm/io.h> #include <asm/ic/ssi.h> @@ -77,7 +75,6 @@ u8 ssi_txrx_byte(u8 data) return readb(&sc520_mmcr->ssircv); } - void ssi_tx_byte(u8 data) { writeb(data, &sc520_mmcr->ssixmit); diff --git a/arch/i386/cpu/sc520/sc520_timer.c b/arch/x86/cpu/sc520/sc520_timer.c index d5617e9..1bcfe67 100644 --- a/arch/i386/cpu/sc520/sc520_timer.c +++ b/arch/x86/cpu/sc520/sc520_timer.c @@ -1,6 +1,9 @@ /* + * (C) Copyright 2008-2011 + * Graeme Russ, <graeme.russ@gmail.com> + * * (C) Copyright 2002 - * Daniel Engström, Omicron Ceti AB <daniel@omicron.se>. + * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se> * * See file CREDITS for list of people who contributed to this * project. @@ -21,8 +24,6 @@ * MA 02111-1307 USA */ -/* stuff specific for the sc520, but independent of implementation */ - #include <common.h> #include <asm/io.h> #include <asm/interrupt.h> diff --git a/arch/i386/cpu/start.S b/arch/x86/cpu/start.S index 0031389..7ccc076 100644 --- a/arch/i386/cpu/start.S +++ b/arch/x86/cpu/start.S @@ -1,7 +1,11 @@ /* - * U-boot - i386 Startup Code + * U-boot - x86 Startup Code * - * Copyright (c) 2002 Omicron Ceti AB, Daniel Engström <denaiel@omicron.se> + * (C) Copyright 2008-2011 + * Graeme Russ, <graeme.russ@gmail.com> + * + * (C) Copyright 2002 + * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se> * * See file CREDITS for list of people who contributed to this * project. @@ -22,19 +26,17 @@ * MA 02111-1307 USA */ - #include <config.h> #include <version.h> #include <asm/global_data.h> #include <asm/processor-flags.h> - .section .text .code32 .globl _start .type _start, @function -.globl _i386boot_start -_i386boot_start: +.globl _x86boot_start +_x86boot_start: /* * This is the fail safe 32-bit bootstrap entry point. The * following code is not executed from a cold-reset (actually, a @@ -56,8 +58,8 @@ _i386boot_start: _start: /* This is the 32-bit cold-reset entry point */ - movl $0x18, %eax /* Load our segement registes, the - * gdt have already been loaded by start16.S */ + /* Load the segement registes to match the gdt loaded in start16.S */ + movl $0x18, %eax movw %ax, %fs movw %ax, %ds movw %ax, %gs @@ -82,21 +84,13 @@ car_init_ret: * starting at CONFIG_SYS_CAR_ADDR to be used as a temporary stack */ movl $CONFIG_SYS_INIT_SP_ADDR, %esp - movl $CONFIG_SYS_INIT_GD_ADDR, %ebp - - /* Set Boot Flags in Global Data */ - movl %ebx, (GD_FLAGS * 4)(%ebp) - - /* Determine our load offset (and put in Global Data) */ - call 1f -1: popl %ecx - subl $1b, %ecx - movl %ecx, (GD_LOAD_OFF * 4)(%ebp) /* Set parameter to board_init_f() to boot flags */ - movl (GD_FLAGS * 4)(%ebp), %eax + xorl %eax, %eax + movw %bx, %ax - call board_init_f /* Enter, U-boot! */ + /* Enter, U-boot! */ + call board_init_f /* indicate (lack of) progress */ movw $0x85, %ax diff --git a/arch/i386/cpu/start16.S b/arch/x86/cpu/start16.S index 7dc5358..f1b9d0a 100644 --- a/arch/i386/cpu/start16.S +++ b/arch/x86/cpu/start16.S @@ -1,7 +1,11 @@ /* - * U-boot - i386 Startup Code + * U-boot - x86 Startup Code * - * Copyright (c) 2002, 2003 Omicron Ceti AB, Daniel Engström <denaiel@omicron.se> + * (C) Copyright 2008-2011 + * Graeme Russ, <graeme.russ@gmail.com> + * + * (C) Copyright 2002,2003 + * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se> * * See file CREDITS for list of people who contributed to this * project. diff --git a/arch/i386/cpu/u-boot.lds b/arch/x86/cpu/u-boot.lds index 98a548d..5597422 100644 --- a/arch/i386/cpu/u-boot.lds +++ b/arch/x86/cpu/u-boot.lds @@ -21,6 +21,7 @@ * MA 02111-1307 USA */ +#include <config.h> OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386") OUTPUT_ARCH(i386) ENTRY(_start) @@ -89,8 +90,8 @@ SECTIONS * Reset Vector at the end of the Flash ROM */ . = START_16; - .start16 : AT (CONFIG_SYS_TEXT_BASE + (FLASH_SIZE - RESET_SEG_SIZE + START_16)) { KEEP(*(.start16)); } + .start16 : AT (CONFIG_SYS_TEXT_BASE + (CONFIG_SYS_MONITOR_LEN - RESET_SEG_SIZE + START_16)) { KEEP(*(.start16)); } . = RESET_VEC_LOC; - .resetvec : AT (CONFIG_SYS_TEXT_BASE + (FLASH_SIZE - RESET_SEG_SIZE + RESET_VEC_LOC)) { KEEP(*(.resetvec)); } + .resetvec : AT (CONFIG_SYS_TEXT_BASE + (CONFIG_SYS_MONITOR_LEN - RESET_SEG_SIZE + RESET_VEC_LOC)) { KEEP(*(.resetvec)); } } diff --git a/arch/i386/include/asm/bitops.h b/arch/x86/include/asm/bitops.h index c7a38f2..c7a38f2 100644 --- a/arch/i386/include/asm/bitops.h +++ b/arch/x86/include/asm/bitops.h diff --git a/arch/i386/include/asm/bootparam.h b/arch/x86/include/asm/bootparam.h index 1400951..1400951 100644 --- a/arch/i386/include/asm/bootparam.h +++ b/arch/x86/include/asm/bootparam.h diff --git a/arch/i386/include/asm/byteorder.h b/arch/x86/include/asm/byteorder.h index 7dfeb8b..7dfeb8b 100644 --- a/arch/i386/include/asm/byteorder.h +++ b/arch/x86/include/asm/byteorder.h diff --git a/arch/i386/include/asm/config.h b/arch/x86/include/asm/config.h index 049c44e..049c44e 100644 --- a/arch/i386/include/asm/config.h +++ b/arch/x86/include/asm/config.h diff --git a/arch/i386/include/asm/e820.h b/arch/x86/include/asm/e820.h index d155ce9..d155ce9 100644 --- a/arch/i386/include/asm/e820.h +++ b/arch/x86/include/asm/e820.h diff --git a/arch/i386/include/asm/errno.h b/arch/x86/include/asm/errno.h index 4c82b50..4c82b50 100644 --- a/arch/i386/include/asm/errno.h +++ b/arch/x86/include/asm/errno.h diff --git a/arch/i386/include/asm/global_data.h b/arch/x86/include/asm/global_data.h index f8a16d6..f8a16d6 100644 --- a/arch/i386/include/asm/global_data.h +++ b/arch/x86/include/asm/global_data.h diff --git a/arch/i386/include/asm/i8254.h b/arch/x86/include/asm/i8254.h index aafdfb8..aafdfb8 100644 --- a/arch/i386/include/asm/i8254.h +++ b/arch/x86/include/asm/i8254.h diff --git a/arch/i386/include/asm/i8259.h b/arch/x86/include/asm/i8259.h index 774d7a3..774d7a3 100644 --- a/arch/i386/include/asm/i8259.h +++ b/arch/x86/include/asm/i8259.h diff --git a/arch/i386/include/asm/ibmpc.h b/arch/x86/include/asm/ibmpc.h index e35cbd8..e35cbd8 100644 --- a/arch/i386/include/asm/ibmpc.h +++ b/arch/x86/include/asm/ibmpc.h diff --git a/arch/i386/include/asm/ic/pci.h b/arch/x86/include/asm/ic/pci.h index 2e4376b..2e4376b 100644 --- a/arch/i386/include/asm/ic/pci.h +++ b/arch/x86/include/asm/ic/pci.h diff --git a/arch/i386/include/asm/ic/sc520.h b/arch/x86/include/asm/ic/sc520.h index 956c1c2..956c1c2 100644 --- a/arch/i386/include/asm/ic/sc520.h +++ b/arch/x86/include/asm/ic/sc520.h diff --git a/arch/i386/include/asm/ic/ssi.h b/arch/x86/include/asm/ic/ssi.h index bd48eab..bd48eab 100644 --- a/arch/i386/include/asm/ic/ssi.h +++ b/arch/x86/include/asm/ic/ssi.h diff --git a/arch/i386/include/asm/interrupt.h b/arch/x86/include/asm/interrupt.h index d32ef8b..be52fe4 100644 --- a/arch/i386/include/asm/interrupt.h +++ b/arch/x86/include/asm/interrupt.h @@ -29,10 +29,10 @@ #include <asm/types.h> -/* arch/i386/cpu/interrupts.c */ +/* arch/x86/cpu/interrupts.c */ void set_vector(u8 intnum, void *routine); -/* arch/i386/lib/interupts.c */ +/* arch/x86/lib/interupts.c */ void disable_irq(int irq); void enable_irq(int irq); diff --git a/arch/i386/include/asm/io.h b/arch/x86/include/asm/io.h index 9b757d4..9b757d4 100644 --- a/arch/i386/include/asm/io.h +++ b/arch/x86/include/asm/io.h diff --git a/arch/i386/include/asm/ioctl.h b/arch/x86/include/asm/ioctl.h index b279fe0..b279fe0 100644 --- a/arch/i386/include/asm/ioctl.h +++ b/arch/x86/include/asm/ioctl.h diff --git a/arch/i386/include/asm/ist.h b/arch/x86/include/asm/ist.h index 7e5dff1..7e5dff1 100644 --- a/arch/i386/include/asm/ist.h +++ b/arch/x86/include/asm/ist.h diff --git a/arch/i386/include/asm/pci.h b/arch/x86/include/asm/pci.h index 050a2bb..050a2bb 100644 --- a/arch/i386/include/asm/pci.h +++ b/arch/x86/include/asm/pci.h diff --git a/arch/i386/include/asm/posix_types.h b/arch/x86/include/asm/posix_types.h index 5529f32..5529f32 100644 --- a/arch/i386/include/asm/posix_types.h +++ b/arch/x86/include/asm/posix_types.h diff --git a/arch/i386/include/asm/processor-flags.h b/arch/x86/include/asm/processor-flags.h index 7a3e836..7a3e836 100644 --- a/arch/i386/include/asm/processor-flags.h +++ b/arch/x86/include/asm/processor-flags.h diff --git a/arch/i386/include/asm/processor.h b/arch/x86/include/asm/processor.h index 22a1298..22a1298 100644 --- a/arch/i386/include/asm/processor.h +++ b/arch/x86/include/asm/processor.h diff --git a/arch/i386/include/asm/ptrace.h b/arch/x86/include/asm/ptrace.h index a727dbf..a727dbf 100644 --- a/arch/i386/include/asm/ptrace.h +++ b/arch/x86/include/asm/ptrace.h diff --git a/arch/i386/include/asm/realmode.h b/arch/x86/include/asm/realmode.h index 9177e4e..9177e4e 100644 --- a/arch/i386/include/asm/realmode.h +++ b/arch/x86/include/asm/realmode.h diff --git a/arch/i386/include/asm/string.h b/arch/x86/include/asm/string.h index 3643a79..3643a79 100644 --- a/arch/i386/include/asm/string.h +++ b/arch/x86/include/asm/string.h diff --git a/arch/i386/include/asm/types.h b/arch/x86/include/asm/types.h index 9a40e38..9a40e38 100644 --- a/arch/i386/include/asm/types.h +++ b/arch/x86/include/asm/types.h diff --git a/arch/i386/include/asm/u-boot-i386.h b/arch/x86/include/asm/u-boot-x86.h index 7b39bd2..944e1a2 100644 --- a/arch/i386/include/asm/u-boot-i386.h +++ b/arch/x86/include/asm/u-boot-x86.h @@ -35,7 +35,7 @@ void timer_isr(void *); typedef void (timer_fnc_t) (void); int register_timer_isr (timer_fnc_t *isr_func); -/* Architecture specific - can be in arch/i386/cpu/, arch/i386/lib/, or $(BOARD)/ */ +/* Architecture specific - can be in arch/x86/cpu/, arch/x86/lib/, or $(BOARD)/ */ int timer_init(void); int dram_init_f(void); @@ -51,7 +51,7 @@ void setup_pcat_compatibility(void); void isa_unmap_rom(u32 addr); u32 isa_map_rom(u32 bus_addr, int size); -/* arch/i386/lib/... */ +/* arch/x86/lib/... */ int video_bios_init(void); int video_init(void); diff --git a/arch/i386/include/asm/u-boot.h b/arch/x86/include/asm/u-boot.h index a43b3aa..a43b3aa 100644 --- a/arch/i386/include/asm/u-boot.h +++ b/arch/x86/include/asm/u-boot.h diff --git a/arch/i386/include/asm/unaligned.h b/arch/x86/include/asm/unaligned.h index 6cecbbb..6cecbbb 100644 --- a/arch/i386/include/asm/unaligned.h +++ b/arch/x86/include/asm/unaligned.h diff --git a/arch/i386/include/asm/video/edid.h b/arch/x86/include/asm/video/edid.h index 928c342..928c342 100644 --- a/arch/i386/include/asm/video/edid.h +++ b/arch/x86/include/asm/video/edid.h diff --git a/arch/i386/include/asm/zimage.h b/arch/x86/include/asm/zimage.h index b6266e4..b6266e4 100644 --- a/arch/i386/include/asm/zimage.h +++ b/arch/x86/include/asm/zimage.h diff --git a/arch/i386/lib/Makefile b/arch/x86/lib/Makefile index 71e94f7..71e94f7 100644 --- a/arch/i386/lib/Makefile +++ b/arch/x86/lib/Makefile diff --git a/arch/i386/lib/bios.S b/arch/x86/lib/bios.S index 48f1b81..660a244 100644 --- a/arch/i386/lib/bios.S +++ b/arch/x86/lib/bios.S @@ -1,6 +1,6 @@ /* * (C) Copyright 2002 - * Daniel Engström, Omicron Ceti AB, daniel@omicron.se + * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se> * * See file CREDITS for list of people who contributed to this * project. @@ -42,7 +42,6 @@ * a general purpose replacement for a real BIOS !! */ - .section .bios, "ax" .code16 .org 0 diff --git a/arch/i386/lib/bios.h b/arch/x86/lib/bios.h index 4901f89..3c8d61a 100644 --- a/arch/i386/lib/bios.h +++ b/arch/x86/lib/bios.h @@ -1,6 +1,6 @@ /* * (C) Copyright 2002 - * Daniel Engström, Omicron Ceti AB, daniel@omicron.se + * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se> * * See file CREDITS for list of people who contributed to this * project. @@ -57,7 +57,7 @@ #define OFFS_FLAGS 44 /* 16bit */ #define SEGMENT 0x40 -#define STACK 0x800 /* stack at 0x40:0x800 -> 0x800 */ +#define STACK 0x800 /* stack at 0x40:0x800 -> 0x800 */ /* save general registers */ /* save some segments */ @@ -67,28 +67,26 @@ /* setup BIOS stackpointer */ #define MAKE_BIOS_STACK \ - pushal ; \ - pushw %ds ; \ - pushw %gs ; \ - pushw %es ; \ - pushw %ss ; \ - popw %gs ; \ - movw $SEGMENT,%ax ; \ - movw %ax,%ds ; \ - movw %ax,%es ; \ - movw %ax,%ss ; \ - movw %sp,%bp ; \ - movw $STACK,%sp + pushal; \ + pushw %ds; \ + pushw %gs; \ + pushw %es; \ + pushw %ss; \ + popw %gs; \ + movw $SEGMENT, %ax; \ + movw %ax, %ds; \ + movw %ax, %es; \ + movw %ax, %ss; \ + movw %sp, %bp; \ + movw $STACK, %sp #define RESTORE_CALLERS_STACK \ - pushw %gs ; /* restore callers stack segment */ \ - popw %ss ; \ - movw %bp,%sp ; /* restore stackpointer */ \ - \ - popw %es ; /* restore segment selectors */ \ - popw %gs ; \ - popw %ds ; \ - \ - popal /* restore GP registers */ + pushw %gs; /* restore callers stack segment */ \ + popw %ss; \ + movw %bp, %sp; /* restore stackpointer */ \ + popw %es; /* restore segment selectors */ \ + popw %gs; \ + popw %ds; \ + popal /* restore GP registers */ #endif diff --git a/arch/i386/lib/bios_pci.S b/arch/x86/lib/bios_pci.S index 9e412e5..9e412e5 100644 --- a/arch/i386/lib/bios_pci.S +++ b/arch/x86/lib/bios_pci.S diff --git a/arch/i386/lib/bios_setup.c b/arch/x86/lib/bios_setup.c index 75407c1..6949b350 100644 --- a/arch/i386/lib/bios_setup.c +++ b/arch/x86/lib/bios_setup.c @@ -1,6 +1,6 @@ /* * (C) Copyright 2002 - * Daniel Engström, Omicron Ceti AB, daniel@omicron.se + * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se> * * See file CREDITS for list of people who contributed to this * project. @@ -21,7 +21,6 @@ * MA 02111-1307 USA */ - /* * Partly based on msbios.c from rolo 1.6: *---------------------------------------------------------------------- diff --git a/arch/i386/lib/board.c b/arch/x86/lib/board.c index e0f9803..df54222 100644 --- a/arch/i386/lib/board.c +++ b/arch/x86/lib/board.c @@ -1,9 +1,12 @@ /* + * (C) Copyright 2008-2011 + * Graeme Russ, <graeme.russ@gmail.com> + * * (C) Copyright 2002 - * Daniel Engström, Omicron Ceti AB, daniel@omicron.se + * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se> * * (C) Copyright 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * Wolfgang Denk, DENX Software Engineering, <wd@denx.de> * * (C) Copyright 2002 * Sysgo Real-Time Solutions, GmbH <www.elinos.com> @@ -38,7 +41,7 @@ #include <net.h> #include <ide.h> #include <serial.h> -#include <asm/u-boot-i386.h> +#include <asm/u-boot-x86.h> #include <elf.h> #ifdef CONFIG_BITBANGMII @@ -103,13 +106,6 @@ static int display_banner (void) return (0); } -/* - * WARNING: this code looks "cleaner" than the PowerPC version, but - * has the disadvantage that you either get nothing, or everything. - * On PowerPC, you might see "DRAM: " before the system hangs - which - * gives a simple yet clear indication which part of the - * initialization if failing. - */ static int display_dram_config (void) { int i; @@ -141,7 +137,6 @@ static void display_flash_config (ulong size) * can relocate the monitor code to RAM. */ - /* * All attempts to come up with a "common" initialization sequence * that works for all boards and architectures failed: some of the @@ -251,13 +246,13 @@ static int do_elf_reloc_fixups(void) return 0; } -/* - * Load U-Boot into RAM, initialize BSS, perform relocation adjustments - */ +/* Load U-Boot into RAM, initialize BSS, perform relocation adjustments */ void board_init_f(ulong boot_flags) { init_fnc_t **init_fnc_ptr; + gd->flags = boot_flags; + for (init_fnc_ptr = init_sequence_f; *init_fnc_ptr; ++init_fnc_ptr) { if ((*init_fnc_ptr)() != 0) hang(); diff --git a/arch/i386/lib/bootm.c b/arch/x86/lib/bootm.c index b36e58d..a21a21f 100644 --- a/arch/i386/lib/bootm.c +++ b/arch/x86/lib/bootm.c @@ -5,10 +5,13 @@ * * Copyright (C) 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of @@ -17,8 +20,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA */ #include <common.h> diff --git a/arch/i386/lib/interrupts.c b/arch/x86/lib/interrupts.c index 5a28278..a2c598f 100644 --- a/arch/i386/lib/interrupts.c +++ b/arch/x86/lib/interrupts.c @@ -1,21 +1,21 @@ /* * (C) Copyright 2009 - * Graeme Russ, graeme.russ@gmail.com + * Graeme Russ, <graeme.russ@gmail.com> * * (C) Copyright 2007 - * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com + * Daniel Hellstrom, Gaisler Research, <daniel@gaisler.com> * * (C) Copyright 2006 - * Detlev Zundel, DENX Software Engineering, dzu@denx.de + * Detlev Zundel, DENX Software Engineering, <dzu@denx.de> * * (C) Copyright -2003 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * Wolfgang Denk, DENX Software Engineering, <wd@denx.de> * * (C) Copyright 2002 - * Daniel Engström, Omicron Ceti AB, daniel@omicron.se + * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se> * * (C) Copyright 2001 - * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc. + * Josh Huber, Mission Critical Linux, Inc, <huber@mclx.com> * * See file CREDITS for list of people who contributed to this * project. @@ -38,11 +38,11 @@ /* * This file contains the high-level API for the interrupt sub-system - * of the i386 port of U-Boot. Most of the functionality has been + * of the x86 port of U-Boot. Most of the functionality has been * shamelessly stolen from the leon2 / leon3 ports of U-Boot. * Daniel Hellstrom, Detlev Zundel, Wolfgang Denk and Josh Huber are * credited for the corresponding work on those ports. The original - * interrupt handling routines for the i386 port were written by + * interrupt handling routines for the x86 port were written by * Daniel Engström */ diff --git a/arch/i386/lib/pcat_interrupts.c b/arch/x86/lib/pcat_interrupts.c index 67e6e97..364c435 100644 --- a/arch/i386/lib/pcat_interrupts.c +++ b/arch/x86/lib/pcat_interrupts.c @@ -1,9 +1,9 @@ /* * (C) Copyright 2009 - * Graeme Russ, graeme.russ@gmail.com + * Graeme Russ, <graeme.russ@gmail.com> * * (C) Copyright 2002 - * Daniel Engström, Omicron Ceti AB, daniel@omicron.se. + * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se> * * See file CREDITS for list of people who contributed to this * project. diff --git a/arch/i386/lib/pcat_timer.c b/arch/x86/lib/pcat_timer.c index 1373fd1..1911c6c 100644 --- a/arch/i386/lib/pcat_timer.c +++ b/arch/x86/lib/pcat_timer.c @@ -1,6 +1,6 @@ /* * (C) Copyright 2002 - * Daniel Engström, Omicron Ceti AB, daniel@omicron.se. + * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se> * * See file CREDITS for list of people who contributed to this * project. diff --git a/arch/i386/lib/pci.c b/arch/x86/lib/pci.c index 9020e7c..e791e88 100644 --- a/arch/i386/lib/pci.c +++ b/arch/x86/lib/pci.c @@ -1,6 +1,6 @@ /* * (C) Copyright 2002 - * Daniel Engström, Omicron Ceti AB, daniel@omicron.se + * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se> * * See file CREDITS for list of people who contributed to this * project. @@ -54,10 +54,9 @@ int pci_shadow_rom(pci_dev_t dev, unsigned char *dest) class_code &= 0xffffff00; class_code >>= 8; -#if 0 - printf("PCI Header Vendor %04x device %04x class %06x\n", + debug("PCI Header Vendor %04x device %04x class %06x\n", vendor, device, class_code); -#endif + /* Enable the rom addess decoder */ pci_write_config_dword(dev, PCI_ROM_ADDRESS, (u32)PCI_ROM_ADDRESS_MASK); pci_read_config_dword(dev, PCI_ROM_ADDRESS, &addr_reg); @@ -70,13 +69,12 @@ int pci_shadow_rom(pci_dev_t dev, unsigned char *dest) size = (~(addr_reg&PCI_ROM_ADDRESS_MASK))+1; -#if 0 - printf("ROM is %d bytes\n", size); -#endif + debug("ROM is %d bytes\n", size); + rom_addr = pci_get_rom_window(hose, size); -#if 0 - printf("ROM mapped at %x \n", rom_addr); -#endif + + debug("ROM mapped at %x\n", rom_addr); + pci_write_config_dword(dev, PCI_ROM_ADDRESS, pci_phys_to_mem(dev, rom_addr) |PCI_ROM_ADDRESS_ENABLE); diff --git a/arch/i386/lib/pci_type1.c b/arch/x86/lib/pci_type1.c index 225ae4a..8ce5b33 100644 --- a/arch/i386/lib/pci_type1.c +++ b/arch/x86/lib/pci_type1.c @@ -1,15 +1,30 @@ /* - * Support for type PCI configuration cycles. - * based on pci_indirect.c + * (C) Copyright 2002 + * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se> * - * Copyright (C) 2002 Daniel Engström, Omicron Ceti AB, daniel@omicron.se. + * See file CREDITS for list of people who contributed to this + * project. * * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA */ +/* + * Support for type PCI configuration cycles. + * based on pci_indirect.c + */ #include <common.h> #include <asm/io.h> #include <pci.h> diff --git a/arch/i386/lib/realmode.c b/arch/x86/lib/realmode.c index 2dda95b..5be827c 100644 --- a/arch/i386/lib/realmode.c +++ b/arch/x86/lib/realmode.c @@ -1,6 +1,6 @@ /* * (C) Copyright 2002 - * Daniel Engström, Omicron Ceti AB, daniel@omicron.se + * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se> * * See file CREDITS for list of people who contributed to this * project. @@ -26,10 +26,8 @@ #include <asm/ptrace.h> #include <asm/realmode.h> - #define REALMODE_MAILBOX ((char*)0xe00) - extern ulong __realmode_start; extern ulong __realmode_size; extern char realmode_enter; @@ -57,13 +55,11 @@ int enter_realmode(u16 seg, u16 off, struct pt_regs *in, struct pt_regs *out) { /* setup out thin bios emulation */ - if (bios_setup()) { + if (bios_setup()) return -1; - } - if (realmode_setup()) { + if (realmode_setup()) return -1; - } in->eip = off; in->xcs = seg; diff --git a/arch/i386/lib/realmode_switch.S b/arch/x86/lib/realmode_switch.S index d6c74ec..fce4ecc 100644 --- a/arch/i386/lib/realmode_switch.S +++ b/arch/x86/lib/realmode_switch.S @@ -21,7 +21,6 @@ * MA 02111-1307 USA */ - /* 32bit -> 16bit -> 32bit mode switch code */ /* diff --git a/arch/i386/lib/timer.c b/arch/x86/lib/timer.c index 5cb1f54..8fc68cd 100644 --- a/arch/i386/lib/timer.c +++ b/arch/x86/lib/timer.c @@ -1,6 +1,9 @@ /* + * (C) Copyright 2008,2009 + * Graeme Russ, <graeme.russ@gmail.com> + * * (C) Copyright 2002 - * Daniel Engström, Omicron Ceti AB, daniel@omicron.se. + * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se> * * See file CREDITS for list of people who contributed to this * project. diff --git a/arch/i386/lib/video.c b/arch/x86/lib/video.c index c58ed10..b29075c 100644 --- a/arch/i386/lib/video.c +++ b/arch/x86/lib/video.c @@ -1,6 +1,6 @@ /* * (C) Copyright 2002 - * Daniel Engström, Omicron Ceti AB, daniel@omicron.se + * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se> * * See file CREDITS for list of people who contributed to this * project. @@ -30,7 +30,6 @@ #include <asm/io.h> #include <asm/pci.h> - /* basic textmode I/O from linux kernel */ static char *vidmem = (char *)0xb8000; static int vidport; @@ -42,9 +41,9 @@ static void beep(int dur) int i; outb_p(3, 0x61); - for (i=0;i<10*dur;i++) { + for (i = 0; i < 10*dur; i++) udelay(1000); - } + outb_p(0, 0x61); } @@ -52,8 +51,8 @@ static void scroll(void) { int i; - memcpy ( vidmem, vidmem + cols * 2, ( lines - 1 ) * cols * 2 ); - for ( i = ( lines - 1 ) * cols * 2; i < lines * cols * 2; i += 2 ) + memcpy(vidmem, vidmem + cols * 2, (lines - 1) * cols * 2); + for (i = (lines - 1) * cols * 2; i < lines * cols * 2; i += 2) vidmem[i] = ' '; } @@ -61,14 +60,14 @@ static void __video_putc(const char c, int *x, int *y) { if (c == '\n') { (*x) = 0; - if ( ++(*y) >= lines ) { + if (++(*y) >= lines) { scroll(); (*y)--; } } else if (c == '\b') { if ((*x) != 0) { --(*x); - vidmem [ ( (*x) + cols * (*y) ) * 2 ] = ' '; + vidmem[((*x) + cols * (*y)) * 2] = ' '; } } else if (c == '\r') { (*x) = 0; @@ -106,16 +105,15 @@ static void __video_putc(const char c, int *x, int *y) } } else if (c == '\f') { int i; - for (i=0;i<lines*cols*2;i+=2) { + for (i = 0; i < lines * cols * 2; i += 2) vidmem[i] = 0; - } (*x) = 0; (*y) = 0; } else { - vidmem [ ( (*x) + cols * (*y) ) * 2 ] = c; - if ( ++(*x) >= cols ) { + vidmem[((*x) + cols * (*y)) * 2] = c; + if (++(*x) >= cols) { (*x) = 0; - if ( ++(*y) >= lines ) { + if (++(*y) >= lines) { scroll(); (*y)--; } @@ -150,9 +148,8 @@ static void video_puts(const char *s) x = orig_x; y = orig_y; - while ( ( c = *s++ ) != '\0' ) { + while ((c = *s++) != '\0') __video_putc(c, &x, &y); - } orig_x = x; orig_y = y; @@ -189,10 +186,8 @@ int video_init(void) #if 0 printf("pos %x %d %d\n", pos, orig_x, orig_y); #endif - if (orig_y > lines) { + if (orig_y > lines) orig_x = orig_y =0; - } - memset(&vga_dev, 0, sizeof(vga_dev)); strcpy(vga_dev.name, "vga"); @@ -203,13 +198,11 @@ int video_init(void) vga_dev.tstc = NULL; /* 'tstc' function */ vga_dev.getc = NULL; /* 'getc' function */ - if (stdio_register(&vga_dev) == 0) { - return 1; - } + if (stdio_register(&vga_dev) == 0) + return 1; - if (i8042_kbd_init()) { + if (i8042_kbd_init()) return 1; - } memset(&kbd_dev, 0, sizeof(kbd_dev)); strcpy(kbd_dev.name, "kbd"); @@ -220,18 +213,17 @@ int video_init(void) kbd_dev.tstc = i8042_tstc; /* 'tstc' function */ kbd_dev.getc = i8042_getc; /* 'getc' function */ - if (stdio_register(&kbd_dev) == 0) { - return 1; - } + if (stdio_register(&kbd_dev) == 0) + return 1; + return 0; } int drv_video_init(void) { - if (video_bios_init()) { + if (video_bios_init()) return 1; - } return video_init(); } diff --git a/arch/i386/lib/video_bios.c b/arch/x86/lib/video_bios.c index c8060e6..6bc4335 100644 --- a/arch/i386/lib/video_bios.c +++ b/arch/x86/lib/video_bios.c @@ -1,6 +1,6 @@ /* * (C) Copyright 2002 - * Daniel Engström, Omicron Ceti AB, daniel@omicron.se + * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se> * * See file CREDITS for list of people who contributed to this * project. diff --git a/arch/i386/lib/zimage.c b/arch/x86/lib/zimage.c index 0c42072..cc4b40e 100644 --- a/arch/i386/lib/zimage.c +++ b/arch/x86/lib/zimage.c @@ -1,6 +1,6 @@ /* * (C) Copyright 2002 - * Daniel Engström, Omicron Ceti AB, daniel@omicron.se + * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se> * * See file CREDITS for list of people who contributed to this * project. @@ -22,7 +22,7 @@ */ /* - * Linux i386 zImage and bzImage loading + * Linux x86 zImage and bzImage loading * * based on the procdure described in * linux/Documentation/i386/boot.txt diff --git a/board/LEOX/elpt860/u-boot.lds b/board/LEOX/elpt860/u-boot.lds index 45206ca..5aaf6b3 100644 --- a/board/LEOX/elpt860/u-boot.lds +++ b/board/LEOX/elpt860/u-boot.lds @@ -67,13 +67,14 @@ SECTIONS PROVIDE (erotext = .); .reloc : { - KEEP(*(.got)) _GOT2_TABLE_ = .; KEEP(*(.got2)) + KEEP(*(.got)) + PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); _FIXUP_TABLE_ = .; KEEP(*(.fixup)) } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; __fixup_entries = (. - _FIXUP_TABLE_)>>2; .data : diff --git a/board/LaCie/edminiv2/Makefile b/board/LaCie/edminiv2/Makefile index f733389..31b89e4 100644 --- a/board/LaCie/edminiv2/Makefile +++ b/board/LaCie/edminiv2/Makefile @@ -1,5 +1,5 @@ # -# Copyright (C) 2010 Albert ARIBAUD <albert.aribaud@free.fr> +# Copyright (C) 2010 Albert ARIBAUD <albert.u.boot@aribaud.net> # # Based on original Kirkwood support which is # (C) Copyright 2009 diff --git a/board/LaCie/edminiv2/config.mk b/board/LaCie/edminiv2/config.mk index 2ffd125..b2ee416 100644 --- a/board/LaCie/edminiv2/config.mk +++ b/board/LaCie/edminiv2/config.mk @@ -1,5 +1,5 @@ # -# Copyright (C) 2010 Albert ARIBAUD <albert.aribaud@free.fr> +# Copyright (C) 2010 Albert ARIBAUD <albert.u.boot@aribaud.net> # # (C) Copyright 2009 # Marvell Semiconductor <www.marvell.com> diff --git a/board/LaCie/edminiv2/edminiv2.c b/board/LaCie/edminiv2/edminiv2.c index bb388ed..ee26893 100644 --- a/board/LaCie/edminiv2/edminiv2.c +++ b/board/LaCie/edminiv2/edminiv2.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2010 Albert ARIBAUD <albert.aribaud@free.fr> + * Copyright (C) 2010 Albert ARIBAUD <albert.u.boot@aribaud.net> * * (C) Copyright 2009 * Marvell Semiconductor <www.marvell.com> diff --git a/board/Marvell/aspenite/aspenite.c b/board/Marvell/aspenite/aspenite.c index 046ffd6..34ac7aa 100644 --- a/board/Marvell/aspenite/aspenite.c +++ b/board/Marvell/aspenite/aspenite.c @@ -33,9 +33,14 @@ DECLARE_GLOBAL_DATA_PTR; int board_early_init_f(void) { u32 mfp_cfg[] = { + /* I2C */ + MFP105_CI2C_SDA, + MFP106_CI2C_SCL, + /* Enable Console on UART1 */ MFP107_UART1_RXD, MFP108_UART1_TXD, + MFP_EOC /*End of configureation*/ }; /* configure MFP's */ diff --git a/board/Marvell/dkb/dkb.c b/board/Marvell/dkb/dkb.c index 72a2d2a..00f73e7 100644 --- a/board/Marvell/dkb/dkb.c +++ b/board/Marvell/dkb/dkb.c @@ -36,6 +36,10 @@ int board_early_init_f(void) MFP47_UART2_RXD, MFP48_UART2_TXD, + /* I2C */ + MFP53_CI2C_SCL, + MFP54_CI2C_SDA, + MFP_EOC /*End of configureation*/ }; /* configure MFP's */ diff --git a/board/RPXClassic/u-boot.lds b/board/RPXClassic/u-boot.lds index 05cc233..d0b60cf 100644 --- a/board/RPXClassic/u-boot.lds +++ b/board/RPXClassic/u-boot.lds @@ -47,13 +47,14 @@ SECTIONS PROVIDE (erotext = .); .reloc : { - KEEP(*(.got)) _GOT2_TABLE_ = .; KEEP(*(.got2)) + KEEP(*(.got)) + PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); _FIXUP_TABLE_ = .; KEEP(*(.fixup)) } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; __fixup_entries = (. - _FIXUP_TABLE_)>>2; .data : diff --git a/board/RPXlite/u-boot.lds b/board/RPXlite/u-boot.lds index 05cc233..d0b60cf 100644 --- a/board/RPXlite/u-boot.lds +++ b/board/RPXlite/u-boot.lds @@ -47,13 +47,14 @@ SECTIONS PROVIDE (erotext = .); .reloc : { - KEEP(*(.got)) _GOT2_TABLE_ = .; KEEP(*(.got2)) + KEEP(*(.got)) + PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); _FIXUP_TABLE_ = .; KEEP(*(.fixup)) } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; __fixup_entries = (. - _FIXUP_TABLE_)>>2; .data : diff --git a/board/RPXlite_dw/u-boot.lds b/board/RPXlite_dw/u-boot.lds index 05cc233..d0b60cf 100644 --- a/board/RPXlite_dw/u-boot.lds +++ b/board/RPXlite_dw/u-boot.lds @@ -47,13 +47,14 @@ SECTIONS PROVIDE (erotext = .); .reloc : { - KEEP(*(.got)) _GOT2_TABLE_ = .; KEEP(*(.got2)) + KEEP(*(.got)) + PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); _FIXUP_TABLE_ = .; KEEP(*(.fixup)) } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; __fixup_entries = (. - _FIXUP_TABLE_)>>2; .data : diff --git a/board/RRvision/u-boot.lds b/board/RRvision/u-boot.lds index 3e7853a..8385373 100644 --- a/board/RRvision/u-boot.lds +++ b/board/RRvision/u-boot.lds @@ -52,13 +52,14 @@ SECTIONS PROVIDE (erotext = .); .reloc : { - KEEP(*(.got)) _GOT2_TABLE_ = .; KEEP(*(.got2)) + KEEP(*(.got)) + PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); _FIXUP_TABLE_ = .; KEEP(*(.fixup)) } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; __fixup_entries = (. - _FIXUP_TABLE_)>>2; .data : diff --git a/board/actux1/config.mk b/board/actux1/config.mk index 88634f7..9cb838b 100644 --- a/board/actux1/config.mk +++ b/board/actux1/config.mk @@ -2,5 +2,3 @@ CONFIG_SYS_TEXT_BASE = 0x00e00000 # include NPE ethernet driver BOARDLIBS = arch/arm/cpu/ixp/npe/libnpe.o - -LDSCRIPT := $(SRCTREE)/board/$(BOARDDIR)/u-boot.lds diff --git a/board/actux2/config.mk b/board/actux2/config.mk index 88634f7..9cb838b 100644 --- a/board/actux2/config.mk +++ b/board/actux2/config.mk @@ -2,5 +2,3 @@ CONFIG_SYS_TEXT_BASE = 0x00e00000 # include NPE ethernet driver BOARDLIBS = arch/arm/cpu/ixp/npe/libnpe.o - -LDSCRIPT := $(SRCTREE)/board/$(BOARDDIR)/u-boot.lds diff --git a/board/actux3/config.mk b/board/actux3/config.mk index 88634f7..9cb838b 100644 --- a/board/actux3/config.mk +++ b/board/actux3/config.mk @@ -2,5 +2,3 @@ CONFIG_SYS_TEXT_BASE = 0x00e00000 # include NPE ethernet driver BOARDLIBS = arch/arm/cpu/ixp/npe/libnpe.o - -LDSCRIPT := $(SRCTREE)/board/$(BOARDDIR)/u-boot.lds diff --git a/board/adder/u-boot.lds b/board/adder/u-boot.lds index 661a94a..a762769 100644 --- a/board/adder/u-boot.lds +++ b/board/adder/u-boot.lds @@ -43,13 +43,14 @@ SECTIONS PROVIDE (erotext = .); .reloc : { - KEEP(*(.got)) _GOT2_TABLE_ = .; KEEP(*(.got2)) + KEEP(*(.got)) + PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); _FIXUP_TABLE_ = .; KEEP(*(.fixup)) } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2; + __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; __fixup_entries = (. - _FIXUP_TABLE_) >> 2; .data : diff --git a/board/altera/nios2-generic/config.mk b/board/altera/nios2-generic/config.mk index 95e75af..00c16fc 100644 --- a/board/altera/nios2-generic/config.mk +++ b/board/altera/nios2-generic/config.mk @@ -30,5 +30,3 @@ PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(VENDOR)/include ifeq ($(debug),1) PLATFORM_CPPFLAGS += -DDEBUG endif - -LDSCRIPT := $(SRCTREE)/board/$(VENDOR)/$(BOARD)/u-boot.lds diff --git a/board/altera/nios2-generic/nios2-generic.c b/board/altera/nios2-generic/nios2-generic.c index 89848cf..220a4c4 100644 --- a/board/altera/nios2-generic/nios2-generic.c +++ b/board/altera/nios2-generic/nios2-generic.c @@ -24,12 +24,28 @@ #include <common.h> #include <netdev.h> +#include <mtd/cfi_flash.h> +#include <asm/io.h> void text_base_hook(void); /* nop hook for text_base.S */ +#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR) +static void __early_flash_cmd_reset(void) +{ + /* reset flash before we read env */ + writeb(AMD_CMD_RESET, CONFIG_ENV_ADDR); + writeb(FLASH_CMD_RESET, CONFIG_ENV_ADDR); +} +void early_flash_cmd_reset(void) + __attribute__((weak,alias("__early_flash_cmd_reset"))); +#endif + int board_early_init_f(void) { text_base_hook(); +#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR) + early_flash_cmd_reset(); +#endif return 0; } diff --git a/board/amcc/acadia/config.mk b/board/amcc/acadia/config.mk index 2f2787f..bfc0945 100644 --- a/board/amcc/acadia/config.mk +++ b/board/amcc/acadia/config.mk @@ -28,10 +28,3 @@ ifeq ($(debug),1) PLATFORM_CPPFLAGS += -DDEBUG endif - -ifdef CONFIG_SYS_LDSCRIPT -# need to strip off double quotes -LDSCRIPT := $(subst ",,$(CONFIG_SYS_LDSCRIPT)) -else ifdef CONFIG_NAND_U_BOOT -LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot-nand.lds -endif diff --git a/board/amcc/bamboo/config.mk b/board/amcc/bamboo/config.mk index 7ca16a0..24f74e1 100644 --- a/board/amcc/bamboo/config.mk +++ b/board/amcc/bamboo/config.mk @@ -30,10 +30,3 @@ endif ifeq ($(dbcr),1) PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000 endif - -ifdef CONFIG_SYS_LDSCRIPT -# need to strip off double quotes -LDSCRIPT := $(subst ",,$(CONFIG_SYS_LDSCRIPT)) -else ifdef CONFIG_NAND_U_BOOT -LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot-nand.lds -endif diff --git a/board/amcc/canyonlands/config.mk b/board/amcc/canyonlands/config.mk index abf2a26..d693a26 100644 --- a/board/amcc/canyonlands/config.mk +++ b/board/amcc/canyonlands/config.mk @@ -33,10 +33,3 @@ endif ifeq ($(dbcr),1) PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000 endif - -ifdef CONFIG_SYS_LDSCRIPT -# need to strip off double quotes -LDSCRIPT := $(subst ",,$(CONFIG_SYS_LDSCRIPT)) -else ifdef CONFIG_NAND_U_BOOT -LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot-nand.lds -endif diff --git a/board/amcc/kilauea/config.mk b/board/amcc/kilauea/config.mk index 4ae3ea9..003b8c3 100644 --- a/board/amcc/kilauea/config.mk +++ b/board/amcc/kilauea/config.mk @@ -24,10 +24,3 @@ ifeq ($(debug),1) PLATFORM_CPPFLAGS += -DDEBUG endif - -ifdef CONFIG_SYS_LDSCRIPT -# need to strip off double quotes -LDSCRIPT := $(subst ",,$(CONFIG_SYS_LDSCRIPT)) -else ifdef CONFIG_NAND_U_BOOT -LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot-nand.lds -endif diff --git a/board/amcc/sequoia/config.mk b/board/amcc/sequoia/config.mk index 73efe72..e0bf071 100644 --- a/board/amcc/sequoia/config.mk +++ b/board/amcc/sequoia/config.mk @@ -33,10 +33,3 @@ endif ifeq ($(dbcr),1) PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000 endif - -ifdef CONFIG_SYS_LDSCRIPT -# need to strip off double quotes -LDSCRIPT := $(subst ",,$(CONFIG_SYS_LDSCRIPT)) -else ifdef CONFIG_NAND_U_BOOT -LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot-nand.lds -endif diff --git a/board/amirix/ap1000/u-boot.lds b/board/amirix/ap1000/u-boot.lds index 57fe1d9..cd8f5ce 100644 --- a/board/amirix/ap1000/u-boot.lds +++ b/board/amirix/ap1000/u-boot.lds @@ -49,13 +49,14 @@ SECTIONS PROVIDE (erotext = .); .reloc : { - KEEP(*(.got)) _GOT2_TABLE_ = .; KEEP(*(.got2)) + KEEP(*(.got)) + PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); _FIXUP_TABLE_ = .; KEEP(*(.fixup)) } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; __fixup_entries = (. - _FIXUP_TABLE_)>>2; .data : diff --git a/board/armltd/vexpress/ca9x4_ct_vxp.c b/board/armltd/vexpress/ca9x4_ct_vxp.c index ce1be1e..3566b95 100644 --- a/board/armltd/vexpress/ca9x4_ct_vxp.c +++ b/board/armltd/vexpress/ca9x4_ct_vxp.c @@ -86,6 +86,15 @@ int board_eth_init(bd_t *bis) return rc; } +int cpu_mmc_init(bd_t *bis) +{ + int rc = 0; +#ifdef CONFIG_ARM_PL180_MMCI + rc = arm_pl180_mmci_init(); +#endif + return rc; +} + static void flash__init(void) { /* Setup the sytem control register to allow writing to flash */ diff --git a/board/armltd/vexpress/config.mk b/board/armltd/vexpress/config.mk deleted file mode 100644 index 36395f2..0000000 --- a/board/armltd/vexpress/config.mk +++ /dev/null @@ -1,22 +0,0 @@ -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# -# Linux-Kernel is expected to be at 0x60008000 -# -CONFIG_SYS_TEXT_BASE = 0x60800000 diff --git a/board/atmel/atstk1000/config.mk b/board/atmel/atstk1000/config.mk index 8c03b77..284f7ff 100644 --- a/board/atmel/atstk1000/config.mk +++ b/board/atmel/atstk1000/config.mk @@ -1,4 +1,3 @@ PLATFORM_RELFLAGS += -ffunction-sections -fdata-sections PLATFORM_LDFLAGS += --gc-sections CONFIG_SYS_TEXT_BASE = 0x00000000 -LDSCRIPT = $(src)board/atmel/atstk1000/u-boot.lds diff --git a/board/avnet/fx12mm/config.mk b/board/avnet/fx12mm/config.mk deleted file mode 100644 index 78dde62..0000000 --- a/board/avnet/fx12mm/config.mk +++ /dev/null @@ -1,29 +0,0 @@ -# -# (C) Copyright 2008 -# Ricardo Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es -# Work supported by Qtechnology http://www.qtec.com -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# -# - -ifdef CONFIG_SYS_LDSCRIPT -# need to strip off double quotes -LDSCRIPT := $(subst ",,$(CONFIG_SYS_LDSCRIPT)) -endif diff --git a/board/avnet/v5fx30teval/config.mk b/board/avnet/v5fx30teval/config.mk deleted file mode 100644 index 78dde62..0000000 --- a/board/avnet/v5fx30teval/config.mk +++ /dev/null @@ -1,29 +0,0 @@ -# -# (C) Copyright 2008 -# Ricardo Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es -# Work supported by Qtechnology http://www.qtec.com -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# -# - -ifdef CONFIG_SYS_LDSCRIPT -# need to strip off double quotes -LDSCRIPT := $(subst ",,$(CONFIG_SYS_LDSCRIPT)) -endif diff --git a/board/bct-brettl2/config.mk b/board/bct-brettl2/config.mk index 0c02d44..799a682 100644 --- a/board/bct-brettl2/config.mk +++ b/board/bct-brettl2/config.mk @@ -23,13 +23,5 @@ # MA 02111-1307 USA # -# This is not actually used for Blackfin boards so do not change it -#CONFIG_SYS_TEXT_BASE = do-not-use-me - -CONFIG_BFIN_CPU = bf536-0.3 - CFLAGS_lib += -O2 CFLAGS_lib/lzma += -O2 - -# Set some default LDR flags based on boot mode. -LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE)) diff --git a/board/bf506f-ezkit/Makefile b/board/bf506f-ezkit/Makefile new file mode 100644 index 0000000..cde8168 --- /dev/null +++ b/board/bf506f-ezkit/Makefile @@ -0,0 +1,54 @@ +# +# U-boot - Makefile +# +# Copyright (c) 2005-2008 Analog Device Inc. +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +COBJS-y := $(BOARD).o + +SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS-y)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(call cmd_link_o_target, $(OBJS) $(SOBJS)) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/bf506f-ezkit/bf506f-ezkit.c b/board/bf506f-ezkit/bf506f-ezkit.c new file mode 100644 index 0000000..638500d --- /dev/null +++ b/board/bf506f-ezkit/bf506f-ezkit.c @@ -0,0 +1,27 @@ +/* + * U-boot - main board file + * + * Copyright (c) 2008-2010 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include <common.h> +#include <asm/blackfin.h> + +int checkboard(void) +{ + printf("Board: ADI BF506F EZ-Kit board\n"); + printf(" Support: http://blackfin.uclinux.org/\n"); + return 0; +} + +int board_early_init_f(void) +{ + bfin_write_EBIU_MODE(1); + SSYNC(); + bfin_write_FLASH_CONTROL_CLEAR(1); + udelay(1); + bfin_write_FLASH_CONTROL_SET(1); + return 0; +} diff --git a/board/bf518f-ezbrd/bf518f-ezbrd.c b/board/bf518f-ezbrd/bf518f-ezbrd.c index ff1ac4c..09a2353 100644 --- a/board/bf518f-ezbrd/bf518f-ezbrd.c +++ b/board/bf518f-ezbrd/bf518f-ezbrd.c @@ -30,24 +30,21 @@ int checkboard(void) #if defined(CONFIG_BFIN_MAC) static void board_init_enetaddr(uchar *mac_addr) { +#ifdef CONFIG_SYS_NO_FLASH +# define USE_MAC_IN_FLASH 0 +#else +# define USE_MAC_IN_FLASH 1 +#endif bool valid_mac = false; -#if 0 - /* the MAC is stored in OTP memory page 0xDF */ - uint32_t ret; - uint64_t otp_mac; - - ret = bfrom_OtpRead(0xDF, OTP_LOWER_HALF, &otp_mac); - if (!(ret & OTP_MASTER_ERROR)) { - uchar *otp_mac_p = (uchar *)&otp_mac; - - for (ret = 0; ret < 6; ++ret) - mac_addr[ret] = otp_mac_p[5 - ret]; - - if (is_valid_ether_addr(mac_addr)) + if (USE_MAC_IN_FLASH) { + /* we cram the MAC in the last flash sector */ + uchar *board_mac_addr = (uchar *)0x203F0096; + if (is_valid_ether_addr(board_mac_addr)) { + memcpy(mac_addr, board_mac_addr, 6); valid_mac = true; + } } -#endif if (!valid_mac) { puts("Warning: Generating 'random' MAC address\n"); @@ -57,6 +54,13 @@ static void board_init_enetaddr(uchar *mac_addr) eth_setenv_enetaddr("ethaddr", mac_addr); } +/* Only the first run of boards had a KSZ switch */ +#if defined(CONFIG_BFIN_SPI) && __SILICON_REVISION__ == 0 +# define KSZ_POSSIBLE 1 +#else +# define KSZ_POSSIBLE 0 +#endif + #define KSZ_MAX_HZ 5000000 #define KSZ_WRITE 0x02 @@ -109,17 +113,16 @@ static int ksz8893m_reset(struct spi_slave *slave) return ret; } -int board_eth_init(bd_t *bis) +static bool board_ksz_init(void) { - static bool switch_is_alive = false, phy_is_ksz = true; - int ret; + static bool switch_is_alive = false; if (!switch_is_alive) { struct spi_slave *slave = spi_setup_slave(0, 1, KSZ_MAX_HZ, SPI_MODE_3); if (slave) { if (!spi_claim_bus(slave)) { - phy_is_ksz = (ksz8893m_reg_read(slave, KSZ_REG_CHID) == 0x88); - ret = phy_is_ksz ? ksz8893m_reset(slave) : 0; + bool phy_is_ksz = (ksz8893m_reg_read(slave, KSZ_REG_CHID) == 0x88); + int ret = phy_is_ksz ? ksz8893m_reset(slave) : 0; switch_is_alive = (ret == 0); spi_release_bus(slave); } @@ -127,10 +130,16 @@ int board_eth_init(bd_t *bis) } } - if (switch_is_alive) - return bfin_EMAC_initialize(bis); - else - return -1; + return switch_is_alive; +} + +int board_eth_init(bd_t *bis) +{ + if (KSZ_POSSIBLE) { + if (!board_ksz_init()) + return 0; + } + return bfin_EMAC_initialize(bis); } #endif @@ -142,6 +151,12 @@ int misc_init_r(void) board_init_enetaddr(enetaddr); #endif +#ifndef CONFIG_SYS_NO_FLASH + /* we use the last sector for the MAC address / POST LDR */ + extern flash_info_t flash_info[]; + flash_protect(FLAG_PROTECT_SET, 0x203F0000, 0x203FFFFF, &flash_info[0]); +#endif + return 0; } diff --git a/board/bf518f-ezbrd/config.mk b/board/bf518f-ezbrd/config.mk index 9a54dbf..799a682 100644 --- a/board/bf518f-ezbrd/config.mk +++ b/board/bf518f-ezbrd/config.mk @@ -23,13 +23,5 @@ # MA 02111-1307 USA # -# This is not actually used for Blackfin boards so do not change it -#CONFIG_SYS_TEXT_BASE = do-not-use-me - -CONFIG_BFIN_CPU = bf518-0.0 - CFLAGS_lib += -O2 CFLAGS_lib/lzma += -O2 - -# Set some default LDR flags based on boot mode. -LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE)) diff --git a/board/bf525-ucr2/Makefile b/board/bf525-ucr2/Makefile new file mode 100644 index 0000000..cde8168 --- /dev/null +++ b/board/bf525-ucr2/Makefile @@ -0,0 +1,54 @@ +# +# U-boot - Makefile +# +# Copyright (c) 2005-2008 Analog Device Inc. +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +COBJS-y := $(BOARD).o + +SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS-y)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(call cmd_link_o_target, $(OBJS) $(SOBJS)) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/bf525-ucr2/bf525-ucr2.c b/board/bf525-ucr2/bf525-ucr2.c new file mode 100644 index 0000000..3e6df1f --- /dev/null +++ b/board/bf525-ucr2/bf525-ucr2.c @@ -0,0 +1,16 @@ +/* U-boot - bf525-ucr2.c board specific routines + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Licensed under the GPL-2 or later. + */ + +#include <common.h> + +int checkboard(void) +{ + printf("Board: bf525-ucr2\n"); + printf("Support: http://www.ucrobotics.com/\n"); + return 0; +} diff --git a/board/bf526-ezbrd/bf526-ezbrd.c b/board/bf526-ezbrd/bf526-ezbrd.c index 52d82cd..4695b11 100644 --- a/board/bf526-ezbrd/bf526-ezbrd.c +++ b/board/bf526-ezbrd/bf526-ezbrd.c @@ -27,21 +27,20 @@ int checkboard(void) #ifdef CONFIG_BFIN_MAC static void board_init_enetaddr(uchar *mac_addr) { +#ifdef CONFIG_SYS_NO_FLASH +# define USE_MAC_IN_FLASH 0 +#else +# define USE_MAC_IN_FLASH 1 +#endif bool valid_mac = false; - /* the MAC is stored in OTP memory page 0xDF */ - uint32_t ret; - uint64_t otp_mac; - - ret = bfrom_OtpRead(0xDF, OTP_LOWER_HALF, &otp_mac); - if (!(ret & OTP_MASTER_ERROR)) { - uchar *otp_mac_p = (uchar *)&otp_mac; - - for (ret = 0; ret < 6; ++ret) - mac_addr[ret] = otp_mac_p[5 - ret]; - - if (is_valid_ether_addr(mac_addr)) + if (USE_MAC_IN_FLASH) { + /* we cram the MAC in the last flash sector */ + uchar *board_mac_addr = (uchar *)0x203F0096; + if (is_valid_ether_addr(board_mac_addr)) { + memcpy(mac_addr, board_mac_addr, 6); valid_mac = true; + } } if (!valid_mac) { @@ -66,5 +65,11 @@ int misc_init_r(void) board_init_enetaddr(enetaddr); #endif +#ifndef CONFIG_SYS_NO_FLASH + /* we use the last sector for the MAC address / POST LDR */ + extern flash_info_t flash_info[]; + flash_protect(FLAG_PROTECT_SET, 0x203F0000, 0x203FFFFF, &flash_info[0]); +#endif + return 0; } diff --git a/board/bf526-ezbrd/config.mk b/board/bf526-ezbrd/config.mk index 46c09ea..799a682 100644 --- a/board/bf526-ezbrd/config.mk +++ b/board/bf526-ezbrd/config.mk @@ -23,13 +23,5 @@ # MA 02111-1307 USA # -# This is not actually used for Blackfin boards so do not change it -#CONFIG_SYS_TEXT_BASE = do-not-use-me - -CONFIG_BFIN_CPU = bf526-0.0 - CFLAGS_lib += -O2 CFLAGS_lib/lzma += -O2 - -# Set some default LDR flags based on boot mode. -LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE)) diff --git a/board/bf527-ad7160-eval/config.mk b/board/bf527-ad7160-eval/config.mk index a6c272a..799a682 100644 --- a/board/bf527-ad7160-eval/config.mk +++ b/board/bf527-ad7160-eval/config.mk @@ -23,13 +23,5 @@ # MA 02111-1307 USA # -# This is not actually used for Blackfin boards so do not change it -#CONFIG_SYS_TEXT_BASE = do-not-use-me - -CONFIG_BFIN_CPU = bf527-0.2 - CFLAGS_lib += -O2 CFLAGS_lib/lzma += -O2 - -# Set some default LDR flags based on boot mode. -LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE)) diff --git a/board/bf527-ezkit/config.mk b/board/bf527-ezkit/config.mk index 790fe99..799a682 100644 --- a/board/bf527-ezkit/config.mk +++ b/board/bf527-ezkit/config.mk @@ -23,13 +23,5 @@ # MA 02111-1307 USA # -# This is not actually used for Blackfin boards so do not change it -#CONFIG_SYS_TEXT_BASE = do-not-use-me - -CONFIG_BFIN_CPU = bf527-0.0 - CFLAGS_lib += -O2 CFLAGS_lib/lzma += -O2 - -# Set some default LDR flags based on boot mode. -LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE)) diff --git a/board/bf527-sdp/config.mk b/board/bf527-sdp/config.mk index 7cb935a..7271774 100644 --- a/board/bf527-sdp/config.mk +++ b/board/bf527-sdp/config.mk @@ -23,14 +23,8 @@ # MA 02111-1307 USA # -# This is not actually used for Blackfin boards so do not change it -#CONFIG_SYS_TEXT_BASE = do-not-use-me - -CONFIG_BFIN_CPU = bf527-0.2 - -CFLAGS_lib_generic += -O2 -CFLAGS_lzma += -O2 +CFLAGS_lib += -O2 +CFLAGS_lib/lzma += -O2 # Set some default LDR flags based on boot mode. LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 6 -LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE)) diff --git a/board/bf533-ezkit/config.mk b/board/bf533-ezkit/config.mk index a0d1749..c0cb9ff 100644 --- a/board/bf533-ezkit/config.mk +++ b/board/bf533-ezkit/config.mk @@ -23,14 +23,8 @@ # MA 02111-1307 USA # -# This is not actually used for Blackfin boards so do not change it -#CONFIG_SYS_TEXT_BASE = do-not-use-me - -CONFIG_BFIN_CPU = bf533-0.3 - CFLAGS_lib += -O2 CFLAGS_lib/lzma += -O2 # Set some default LDR flags based on boot mode. LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8 -LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE)) diff --git a/board/bf533-stamp/config.mk b/board/bf533-stamp/config.mk index a0d1749..c0cb9ff 100644 --- a/board/bf533-stamp/config.mk +++ b/board/bf533-stamp/config.mk @@ -23,14 +23,8 @@ # MA 02111-1307 USA # -# This is not actually used for Blackfin boards so do not change it -#CONFIG_SYS_TEXT_BASE = do-not-use-me - -CONFIG_BFIN_CPU = bf533-0.3 - CFLAGS_lib += -O2 CFLAGS_lib/lzma += -O2 # Set some default LDR flags based on boot mode. LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8 -LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE)) diff --git a/board/bf537-minotaur/config.mk b/board/bf537-minotaur/config.mk index de02635..4bb6506 100644 --- a/board/bf537-minotaur/config.mk +++ b/board/bf537-minotaur/config.mk @@ -23,11 +23,5 @@ # MA 02111-1307 USA # -# This is not actually used for Blackfin boards so do not change it -#CONFIG_SYS_TEXT_BASE = do-not-use-me - -CONFIG_BFIN_CPU = bf537-0.2 - # Set some default LDR flags based on boot mode. -LDR_FLAGS-BFIN_BOOT_UART := --port g --gpio 6 -LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE)) +LDR_FLAGS-BFIN_BOOT_UART := --port g --gpio 6 diff --git a/board/bf537-pnav/config.mk b/board/bf537-pnav/config.mk deleted file mode 100644 index e29d87f..0000000 --- a/board/bf537-pnav/config.mk +++ /dev/null @@ -1,32 +0,0 @@ -# -# Copyright (c) 2005-2008 Analog Device Inc. -# -# (C) Copyright 2001 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -# This is not actually used for Blackfin boards so do not change it -#CONFIG_SYS_TEXT_BASE = do-not-use-me - -CONFIG_BFIN_CPU = bf537-0.2 - -# Set some default LDR flags based on boot mode. -LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE)) diff --git a/board/bf537-srv1/config.mk b/board/bf537-srv1/config.mk index de02635..4bb6506 100644 --- a/board/bf537-srv1/config.mk +++ b/board/bf537-srv1/config.mk @@ -23,11 +23,5 @@ # MA 02111-1307 USA # -# This is not actually used for Blackfin boards so do not change it -#CONFIG_SYS_TEXT_BASE = do-not-use-me - -CONFIG_BFIN_CPU = bf537-0.2 - # Set some default LDR flags based on boot mode. -LDR_FLAGS-BFIN_BOOT_UART := --port g --gpio 6 -LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE)) +LDR_FLAGS-BFIN_BOOT_UART := --port g --gpio 6 diff --git a/board/bf537-stamp/config.mk b/board/bf537-stamp/config.mk index 6694f06..7c023d1 100644 --- a/board/bf537-stamp/config.mk +++ b/board/bf537-stamp/config.mk @@ -23,15 +23,9 @@ # MA 02111-1307 USA # -# This is not actually used for Blackfin boards so do not change it -#CONFIG_SYS_TEXT_BASE = do-not-use-me - -CONFIG_BFIN_CPU = bf537-0.2 - CFLAGS_lib += -O2 CFLAGS_lib/lzma += -O2 # Set some default LDR flags based on boot mode. LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8 LDR_FLAGS-BFIN_BOOT_UART := --port g --gpio 6 -LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE)) diff --git a/board/bf538f-ezkit/config.mk b/board/bf538f-ezkit/config.mk index 4ab1397..c0cb9ff 100644 --- a/board/bf538f-ezkit/config.mk +++ b/board/bf538f-ezkit/config.mk @@ -23,14 +23,8 @@ # MA 02111-1307 USA # -# This is not actually used for Blackfin boards so do not change it -#CONFIG_SYS_TEXT_BASE = do-not-use-me - -CONFIG_BFIN_CPU = bf538-0.4 - CFLAGS_lib += -O2 CFLAGS_lib/lzma += -O2 # Set some default LDR flags based on boot mode. LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8 -LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE)) diff --git a/board/bf548-ezkit/config.mk b/board/bf548-ezkit/config.mk index 9aa1761..7f38b14 100644 --- a/board/bf548-ezkit/config.mk +++ b/board/bf548-ezkit/config.mk @@ -23,11 +23,6 @@ # MA 02111-1307 USA # -# This is not actually used for Blackfin boards so do not change it -#CONFIG_SYS_TEXT_BASE = do-not-use-me - -CONFIG_BFIN_CPU = bf548-0.0 - CFLAGS_lib += -O2 CFLAGS_lib/lzma += -O2 @@ -37,4 +32,3 @@ LDR_FLAGS-BFIN_BOOT_FIFO := --dma 1 LDR_FLAGS-BFIN_BOOT_SPI_MASTER := --dma 1 LDR_FLAGS-BFIN_BOOT_UART := --dma 1 LDR_FLAGS-BFIN_BOOT_NAND := --dma 6 -LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE)) diff --git a/board/bf561-acvilon/config.mk b/board/bf561-acvilon/config.mk index 5c88114..4c811ba 100644 --- a/board/bf561-acvilon/config.mk +++ b/board/bf561-acvilon/config.mk @@ -23,14 +23,8 @@ # MA 02111-1307 USA # -# This is not actually used for Blackfin boards so do not change it -#CONFIG_SYS_TEXT_BASE = do-not-use-me - -CONFIG_BFIN_CPU = bf561-0.5 - CFLAGS_lib += -O2 CFLAGS_lib/lzma += -O2 # Set some default LDR flags based on boot mode. LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 -LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE)) diff --git a/board/bf561-ezkit/config.mk b/board/bf561-ezkit/config.mk index 19cdefc..4c811ba 100644 --- a/board/bf561-ezkit/config.mk +++ b/board/bf561-ezkit/config.mk @@ -23,14 +23,8 @@ # MA 02111-1307 USA # -# This is not actually used for Blackfin boards so do not change it -#CONFIG_SYS_TEXT_BASE = do-not-use-me - -CONFIG_BFIN_CPU = bf561-0.3 - CFLAGS_lib += -O2 CFLAGS_lib/lzma += -O2 # Set some default LDR flags based on boot mode. LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 -LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE)) diff --git a/board/blackstamp/config.mk b/board/blackstamp/config.mk deleted file mode 100644 index 0ca3c90..0000000 --- a/board/blackstamp/config.mk +++ /dev/null @@ -1,32 +0,0 @@ -# -# Copyright (c) 2005-2008 Analog Device Inc. -# -# (C) Copyright 2001 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -# This is not actually used for Blackfin boards so do not change it -#CONFIG_SYS_TEXT_BASE = do-not-use-me - -CONFIG_BFIN_CPU = bf532-0.5 - -# Set some default LDR flags based on boot mode. -LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE)) diff --git a/board/blackvme/config.mk b/board/blackvme/config.mk deleted file mode 100644 index 4d6e0ba..0000000 --- a/board/blackvme/config.mk +++ /dev/null @@ -1,32 +0,0 @@ -# -# Copyright (c) 2005-2008 Analog Device Inc. -# -# (C) Copyright 2001 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -# This is not actually used for Blackfin boards so do not change it -#CONFIG_SYS_TEXT_BASE = do-not-use-me - -CONFIG_BFIN_CPU = bf561-0.5 - -# Set some default LDR flags based on boot mode. -LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE)) diff --git a/board/c2mon/u-boot.lds b/board/c2mon/u-boot.lds index 524c36e..b9b8e3c 100644 --- a/board/c2mon/u-boot.lds +++ b/board/c2mon/u-boot.lds @@ -55,13 +55,14 @@ SECTIONS PROVIDE (erotext = .); .reloc : { - KEEP(*(.got)) _GOT2_TABLE_ = .; KEEP(*(.got2)) + KEEP(*(.got)) + PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); _FIXUP_TABLE_ = .; KEEP(*(.fixup)) } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; __fixup_entries = (. - _FIXUP_TABLE_)>>2; .data : diff --git a/board/cm-bf527/config.mk b/board/cm-bf527/config.mk index 790fe99..799a682 100644 --- a/board/cm-bf527/config.mk +++ b/board/cm-bf527/config.mk @@ -23,13 +23,5 @@ # MA 02111-1307 USA # -# This is not actually used for Blackfin boards so do not change it -#CONFIG_SYS_TEXT_BASE = do-not-use-me - -CONFIG_BFIN_CPU = bf527-0.0 - CFLAGS_lib += -O2 CFLAGS_lib/lzma += -O2 - -# Set some default LDR flags based on boot mode. -LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE)) diff --git a/board/cm-bf533/config.mk b/board/cm-bf533/config.mk index a0d1749..c0cb9ff 100644 --- a/board/cm-bf533/config.mk +++ b/board/cm-bf533/config.mk @@ -23,14 +23,8 @@ # MA 02111-1307 USA # -# This is not actually used for Blackfin boards so do not change it -#CONFIG_SYS_TEXT_BASE = do-not-use-me - -CONFIG_BFIN_CPU = bf533-0.3 - CFLAGS_lib += -O2 CFLAGS_lib/lzma += -O2 # Set some default LDR flags based on boot mode. LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8 -LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE)) diff --git a/board/cm-bf537e/config.mk b/board/cm-bf537e/config.mk index c5d45c7..c0cb9ff 100644 --- a/board/cm-bf537e/config.mk +++ b/board/cm-bf537e/config.mk @@ -23,14 +23,8 @@ # MA 02111-1307 USA # -# This is not actually used for Blackfin boards so do not change it -#CONFIG_SYS_TEXT_BASE = do-not-use-me - -CONFIG_BFIN_CPU = bf537-0.2 - CFLAGS_lib += -O2 CFLAGS_lib/lzma += -O2 # Set some default LDR flags based on boot mode. LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8 -LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE)) diff --git a/board/cm-bf537u/config.mk b/board/cm-bf537u/config.mk index c5d45c7..c0cb9ff 100644 --- a/board/cm-bf537u/config.mk +++ b/board/cm-bf537u/config.mk @@ -23,14 +23,8 @@ # MA 02111-1307 USA # -# This is not actually used for Blackfin boards so do not change it -#CONFIG_SYS_TEXT_BASE = do-not-use-me - -CONFIG_BFIN_CPU = bf537-0.2 - CFLAGS_lib += -O2 CFLAGS_lib/lzma += -O2 # Set some default LDR flags based on boot mode. LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8 -LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE)) diff --git a/board/cm-bf548/config.mk b/board/cm-bf548/config.mk index da6aa52..5adb6fc 100644 --- a/board/cm-bf548/config.mk +++ b/board/cm-bf548/config.mk @@ -23,11 +23,6 @@ # MA 02111-1307 USA # -# This is not actually used for Blackfin boards so do not change it -#CONFIG_SYS_TEXT_BASE = do-not-use-me - -CONFIG_BFIN_CPU = bf548-0.0 - CFLAGS_lib += -O2 CFLAGS_lib/lzma += -O2 @@ -36,4 +31,3 @@ LDR_FLAGS-BFIN_BOOT_PARA := --dma 6 LDR_FLAGS-BFIN_BOOT_FIFO := --dma 1 LDR_FLAGS-BFIN_BOOT_SPI_MASTER := --dma 1 LDR_FLAGS-BFIN_BOOT_UART := --dma 1 -LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE)) diff --git a/board/cm-bf561/config.mk b/board/cm-bf561/config.mk index 19cdefc..4c811ba 100644 --- a/board/cm-bf561/config.mk +++ b/board/cm-bf561/config.mk @@ -23,14 +23,8 @@ # MA 02111-1307 USA # -# This is not actually used for Blackfin boards so do not change it -#CONFIG_SYS_TEXT_BASE = do-not-use-me - -CONFIG_BFIN_CPU = bf561-0.3 - CFLAGS_lib += -O2 CFLAGS_lib/lzma += -O2 # Set some default LDR flags based on boot mode. LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 -LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE)) diff --git a/board/cm5200/u-boot.lds b/board/cm5200/u-boot.lds deleted file mode 100644 index cf73b11..0000000 --- a/board/cm5200/u-boot.lds +++ /dev/null @@ -1,120 +0,0 @@ -/* - * (C) Copyright 2003-2007 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - arch/powerpc/cpu/mpc5xxx/start.o (.text) - *(.text) - *(.got1) - . = ALIGN(16); - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x0FFF) & 0xFFFFF000; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2; - __fixup_entries = (. - _FIXUP_TABLE_) >> 2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(4096); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(4096); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - __bss_end__ = . ; - PROVIDE (end = .); -} diff --git a/board/cm_t35/Makefile b/board/cm_t35/Makefile index 862b8dc..83d7a56 100644 --- a/board/cm_t35/Makefile +++ b/board/cm_t35/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).o -COBJS := cm_t35.o +COBJS := cm_t35.o leds.o SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/cm_t35/cm_t35.c b/board/cm_t35/cm_t35.c index 459df0b..f82111b 100644 --- a/board/cm_t35/cm_t35.c +++ b/board/cm_t35/cm_t35.c @@ -1,8 +1,9 @@ /* - * (C) Copyright 2010 + * (C) Copyright 2011 * CompuLab, Ltd. <www.compulab.co.il> * - * Author: Mike Rapoport <mike@compulab.co.il> + * Authors: Mike Rapoport <mike@compulab.co.il> + * Igor Grinberg <grinberg@compulab.co.il> * * Derived from omap3evm and Beagle Board by * Manikandan Pillai <mani.pillai@ti.com> @@ -24,11 +25,11 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc. */ #include <common.h> +#include <status_led.h> #include <netdev.h> #include <net.h> #include <i2c.h> @@ -41,9 +42,11 @@ #include <asm/arch/sys_proto.h> #include <asm/mach-types.h> +DECLARE_GLOBAL_DATA_PTR; + const omap3_sysinfo sysinfo = { DDR_DISCRETE, - "CM-T35 board", + "CM-T3x board", "NAND", }; @@ -73,31 +76,33 @@ static u32 gpmc_nand_config[GPMC_MAX_REG] = { */ int board_init(void) { - DECLARE_GLOBAL_DATA_PTR; - gpmc_init(); /* in SRAM or SDRAM, finish GPMC */ enable_gpmc_cs_config(gpmc_nand_config, &gpmc_cfg->cs[0], CONFIG_SYS_NAND_BASE, GPMC_SIZE_16M); /* board id for Linux */ - gd->bd->bi_arch_number = MACH_TYPE_CM_T35; + if (get_cpu_family() == CPU_OMAP34XX) + gd->bd->bi_arch_number = MACH_TYPE_CM_T35; + else + gd->bd->bi_arch_number = MACH_TYPE_CM_T3730; + /* boot param addr */ gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100); +#if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT) + status_led_set(STATUS_LED_BOOT, STATUS_LED_ON); +#endif + return 0; } /* * Routine: misc_init_r - * Description: Init I2C and display die ID + * Description: display die ID */ int misc_init_r(void) { -#ifdef CONFIG_DRIVER_OMAP34XX_I2C - i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); -#endif - dieid_num_r(); return 0; @@ -109,7 +114,7 @@ int misc_init_r(void) * hardware. Many pins need to be moved from protect to primary * mode. */ -void set_muxconf_regs(void) +static void cm_t3x_set_common_muxconf(void) { /* SDRC */ MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)); /*SDRC_D0*/ @@ -184,7 +189,7 @@ void set_muxconf_regs(void) /* SB-T35 Ethernet */ MUX_VAL(CP(GPMC_NCS4), (IEN | PTU | EN | M0)); /*GPMC_nCS4*/ - /* CM-T35 Ethernet */ + /* CM-T3x Ethernet */ MUX_VAL(CP(GPMC_NCS5), (IDIS | PTU | DIS | M0)); /*GPMC_nCS5*/ MUX_VAL(CP(GPMC_CLK), (IEN | PTD | DIS | M4)); /*GPIO_59*/ MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0)); /*nADV_ALE*/ @@ -200,12 +205,6 @@ void set_muxconf_regs(void) MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0)); /*DSS_HSYNC*/ MUX_VAL(CP(DSS_VSYNC), (IDIS | PTD | DIS | M0)); /*DSS_VSYNC*/ MUX_VAL(CP(DSS_ACBIAS), (IDIS | PTD | DIS | M0)); /*DSS_ACBIAS*/ - MUX_VAL(CP(DSS_DATA0), (IDIS | PTD | DIS | M0)); /*DSS_DATA0*/ - MUX_VAL(CP(DSS_DATA1), (IDIS | PTD | DIS | M0)); /*DSS_DATA1*/ - MUX_VAL(CP(DSS_DATA2), (IDIS | PTD | DIS | M0)); /*DSS_DATA2*/ - MUX_VAL(CP(DSS_DATA3), (IDIS | PTD | DIS | M0)); /*DSS_DATA3*/ - MUX_VAL(CP(DSS_DATA4), (IDIS | PTD | DIS | M0)); /*DSS_DATA4*/ - MUX_VAL(CP(DSS_DATA5), (IDIS | PTD | DIS | M0)); /*DSS_DATA5*/ MUX_VAL(CP(DSS_DATA6), (IDIS | PTD | DIS | M0)); /*DSS_DATA6*/ MUX_VAL(CP(DSS_DATA7), (IDIS | PTD | DIS | M0)); /*DSS_DATA7*/ MUX_VAL(CP(DSS_DATA8), (IDIS | PTD | DIS | M0)); /*DSS_DATA8*/ @@ -218,12 +217,6 @@ void set_muxconf_regs(void) MUX_VAL(CP(DSS_DATA15), (IDIS | PTD | DIS | M0)); /*DSS_DATA15*/ MUX_VAL(CP(DSS_DATA16), (IDIS | PTD | DIS | M0)); /*DSS_DATA16*/ MUX_VAL(CP(DSS_DATA17), (IDIS | PTD | DIS | M0)); /*DSS_DATA17*/ - MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0)); /*DSS_DATA18*/ - MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0)); /*DSS_DATA19*/ - MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0)); /*DSS_DATA20*/ - MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0)); /*DSS_DATA21*/ - MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0)); /*DSS_DATA22*/ - MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0)); /*DSS_DATA23*/ /* serial interface */ MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0)); /*UART3_RX*/ @@ -253,19 +246,72 @@ void set_muxconf_regs(void) MUX_VAL(CP(SYS_NIRQ), (IEN | PTU | EN | M0)); /*SYS_nIRQ*/ MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0)); /*OFF_MODE*/ MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0)); /*CLKOUT1*/ - MUX_VAL(CP(SYS_CLKOUT2), (IDIS | PTD | DIS | M4)); /*green LED*/ + MUX_VAL(CP(SYS_CLKOUT2), (IDIS | PTU | DIS | M4)); /*green LED*/ MUX_VAL(CP(JTAG_nTRST), (IEN | PTD | DIS | M0)); /*JTAG_nTRST*/ MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0)); /*JTAG_TCK*/ MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0)); /*JTAG_TMS*/ MUX_VAL(CP(JTAG_TDI), (IEN | PTD | DIS | M0)); /*JTAG_TDI*/ + + /* MMC1 */ + MUX_VAL(CP(MMC1_CLK), (IDIS | PTU | EN | M0)); /*MMC1_CLK*/ + MUX_VAL(CP(MMC1_CMD), (IEN | PTU | EN | M0)); /*MMC1_CMD*/ + MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | EN | M0)); /*MMC1_DAT0*/ + MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | EN | M0)); /*MMC1_DAT1*/ + MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | EN | M0)); /*MMC1_DAT2*/ + MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | EN | M0)); /*MMC1_DAT3*/ +} + +static void cm_t35_set_muxconf(void) +{ + /* DSS */ + MUX_VAL(CP(DSS_DATA0), (IDIS | PTD | DIS | M0)); /*DSS_DATA0*/ + MUX_VAL(CP(DSS_DATA1), (IDIS | PTD | DIS | M0)); /*DSS_DATA1*/ + MUX_VAL(CP(DSS_DATA2), (IDIS | PTD | DIS | M0)); /*DSS_DATA2*/ + MUX_VAL(CP(DSS_DATA3), (IDIS | PTD | DIS | M0)); /*DSS_DATA3*/ + MUX_VAL(CP(DSS_DATA4), (IDIS | PTD | DIS | M0)); /*DSS_DATA4*/ + MUX_VAL(CP(DSS_DATA5), (IDIS | PTD | DIS | M0)); /*DSS_DATA5*/ + + MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0)); /*DSS_DATA18*/ + MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0)); /*DSS_DATA19*/ + MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0)); /*DSS_DATA20*/ + MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0)); /*DSS_DATA21*/ + MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0)); /*DSS_DATA22*/ + MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0)); /*DSS_DATA23*/ + + /* MMC1 */ + MUX_VAL(CP(MMC1_DAT4), (IEN | PTU | EN | M0)); /*MMC1_DAT4*/ + MUX_VAL(CP(MMC1_DAT5), (IEN | PTU | EN | M0)); /*MMC1_DAT5*/ + MUX_VAL(CP(MMC1_DAT6), (IEN | PTU | EN | M0)); /*MMC1_DAT6*/ + MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | EN | M0)); /*MMC1_DAT7*/ } -#ifdef CONFIG_GENERIC_MMC -int board_mmc_init(bd_t *bis) +static void cm_t3730_set_muxconf(void) { - return omap_mmc_init(0); + /* DSS */ + MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M3)); /*DSS_DATA0*/ + MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M3)); /*DSS_DATA1*/ + MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M3)); /*DSS_DATA2*/ + MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M3)); /*DSS_DATA3*/ + MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M3)); /*DSS_DATA4*/ + MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M3)); /*DSS_DATA5*/ + + MUX_VAL(CP(SYS_BOOT0), (IDIS | PTD | DIS | M3)); /*DSS_DATA18*/ + MUX_VAL(CP(SYS_BOOT1), (IDIS | PTD | DIS | M3)); /*DSS_DATA19*/ + MUX_VAL(CP(SYS_BOOT3), (IDIS | PTD | DIS | M3)); /*DSS_DATA20*/ + MUX_VAL(CP(SYS_BOOT4), (IDIS | PTD | DIS | M3)); /*DSS_DATA21*/ + MUX_VAL(CP(SYS_BOOT5), (IDIS | PTD | DIS | M3)); /*DSS_DATA22*/ + MUX_VAL(CP(SYS_BOOT6), (IDIS | PTD | DIS | M3)); /*DSS_DATA23*/ +} + +void set_muxconf_regs(void) +{ + cm_t3x_set_common_muxconf(); + + if (get_cpu_family() == CPU_OMAP34XX) + cm_t35_set_muxconf(); + else + cm_t3730_set_muxconf(); } -#endif /* * Routine: setup_net_chip_gmpc @@ -277,7 +323,7 @@ static void setup_net_chip_gmpc(void) struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE; enable_gpmc_cs_config(gpmc_net_config, &gpmc_cfg->cs[5], - CM_T35_SMC911X_BASE, GPMC_SIZE_16M); + CM_T3X_SMC911X_BASE, GPMC_SIZE_16M); enable_gpmc_cs_config(gpmc_net_config, &gpmc_cfg->cs[4], SB_T35_SMC911X_BASE, GPMC_SIZE_16M); @@ -356,9 +402,9 @@ int board_eth_init(bd_t *bis) rc1 = handle_mac_address(); if (rc1) - printf("CM-T35: No MAC address found\n"); + printf("CM-T3x: No MAC address found\n"); - rc1 = smc911x_initialize(0, CM_T35_SMC911X_BASE); + rc1 = smc911x_initialize(0, CM_T3X_SMC911X_BASE); if (rc1 > 0) rc++; diff --git a/board/cm_t35/leds.c b/board/cm_t35/leds.c new file mode 100644 index 0000000..71c5b0d --- /dev/null +++ b/board/cm_t35/leds.c @@ -0,0 +1,45 @@ +/* + * (C) Copyright 2011 + * CompuLab, Ltd. <www.compulab.co.il> + * + * Author: Igor Grinberg <grinberg@compulab.co.il> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ +#include <common.h> +#include <status_led.h> +#include <asm/arch/gpio.h> + +static unsigned int leds[] = { GREEN_LED_GPIO }; + +void __led_init(led_id_t mask, int state) +{ + if (omap_request_gpio(leds[mask]) != 0) { + printf("%s: failed requesting GPIO%u\n", __func__, leds[mask]); + return; + } + + omap_set_gpio_direction(leds[mask], 0); +} + +void __led_set(led_id_t mask, int state) +{ + omap_set_gpio_dataout(leds[mask], state == STATUS_LED_ON); +} + +void __led_toggle(led_id_t mask) +{ + omap_set_gpio_dataout(leds[mask], !omap_get_gpio_datain(leds[mask])); +} diff --git a/board/cogent/config.mk b/board/cogent/config.mk index 78730db..12e2e7c 100644 --- a/board/cogent/config.mk +++ b/board/cogent/config.mk @@ -26,5 +26,3 @@ # PLATFORM_CPPFLAGS += -I$(TOPDIR) - -LDSCRIPT := $(SRCTREE)/board/cogent/u-boot.lds diff --git a/board/cogent/u-boot.lds b/board/cogent/u-boot.lds index e324f5c..2393d8d 100644 --- a/board/cogent/u-boot.lds +++ b/board/cogent/u-boot.lds @@ -51,13 +51,14 @@ SECTIONS PROVIDE (erotext = .); .reloc : { - KEEP(*(.got)) _GOT2_TABLE_ = .; KEEP(*(.got2)) + KEEP(*(.got)) + PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); _FIXUP_TABLE_ = .; KEEP(*(.fixup)) } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; __fixup_entries = (. - _FIXUP_TABLE_)>>2; .data : diff --git a/board/mp2usb/Makefile b/board/comelit/dig297/Makefile index 335734a..8dffedd 100644 --- a/board/mp2usb/Makefile +++ b/board/comelit/dig297/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2003-2006 +# (C) Copyright 2000, 2001, 2002 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -25,17 +25,16 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).o -COBJS := mp2usb.o flash.o +COBJS := dig297.o -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) clean: - rm -f $(SOBJS) $(OBJS) + rm -f $(OBJS) distclean: clean rm -f $(LIB) core *.bak $(obj).depend diff --git a/board/comelit/dig297/dig297.c b/board/comelit/dig297/dig297.c new file mode 100644 index 0000000..0062f12 --- /dev/null +++ b/board/comelit/dig297/dig297.c @@ -0,0 +1,187 @@ +/* + * (C) Copyright 2011 Comelit Group SpA + * Luca Ceresoli <luca.ceresoli@comelit.it> + * + * Based on board/ti/beagle/beagle.c: + * (C) Copyright 2004-2008 + * Texas Instruments, <www.ti.com> + * + * Author : + * Sunil Kumar <sunilsaini05@gmail.com> + * Shashi Ranjan <shashiranjanmca05@gmail.com> + * + * Derived from Beagle Board and 3430 SDP code by + * Richard Woodruff <r-woodruff2@ti.com> + * Syed Mohammed Khasim <khasim@ti.com> + * + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <netdev.h> +#include <twl4030.h> +#include <asm/io.h> +#include <asm/arch/omap3-regs.h> +#include <asm/arch/mux.h> +#include <asm/arch/mem.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/gpio.h> +#include <asm/mach-types.h> +#include "dig297.h" + +DECLARE_GLOBAL_DATA_PTR; + +#ifdef CONFIG_CMD_NET +static void setup_net_chip(void); + +#define NET_LAN9221_RESET_GPIO 12 + +/* GPMC CS 5 connected to an SMSC LAN9220 ethernet controller */ +#define NET_LAN9220_GPMC_CONFIG1 (DEVICESIZE_16BIT) +#define NET_LAN9220_GPMC_CONFIG2 (CSWROFFTIME(8) | \ + CSRDOFFTIME(7) | \ + ADVONTIME(1)) +#define NET_LAN9220_GPMC_CONFIG3 (ADVWROFFTIME(2) | \ + ADVRDOFFTIME(2) | \ + ADVONTIME(1)) +#define NET_LAN9220_GPMC_CONFIG4 (WEOFFTIME(8) | \ + WEONTIME(1) | \ + OEOFFTIME(7)| \ + OEONTIME(1)) +#define NET_LAN9220_GPMC_CONFIG5 (PAGEBURSTACCESSTIME(0) | \ + RDACCESSTIME(6) | \ + WRCYCLETIME(0x1D) | \ + RDCYCLETIME(0x1D)) +#define NET_LAN9220_GPMC_CONFIG6 ((1 << 31) | \ + WRACCESSTIME(0x1D) | \ + WRDATAONADMUXBUS(3)) + +static const u32 gpmc_lan_config[] = { + NET_LAN9220_GPMC_CONFIG1, + NET_LAN9220_GPMC_CONFIG2, + NET_LAN9220_GPMC_CONFIG3, + NET_LAN9220_GPMC_CONFIG4, + NET_LAN9220_GPMC_CONFIG5, + NET_LAN9220_GPMC_CONFIG6, + /* CONFIG7: computed by enable_gpmc_cs_config() */ +}; +#endif /* CONFIG_CMD_NET */ + +/* + * Routine: board_init + * Description: Early hardware init. + */ +int board_init(void) +{ + gpmc_init(); /* in SRAM or SDRAM, finish GPMC */ + /* board id for Linux */ + gd->bd->bi_arch_number = MACH_TYPE_OMAP3_CPS; + /* boot param addr */ + gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100); + + return 0; +} + +/* + * Routine: misc_init_r + * Description: Configure board specific parts + */ +int misc_init_r(void) +{ + struct gpio *gpio1_base = (struct gpio *)OMAP34XX_GPIO1_BASE; + struct gpio *gpio5_base = (struct gpio *)OMAP34XX_GPIO5_BASE; + + twl4030_power_init(); + twl4030_led_init(TWL4030_LED_LEDEN_LEDAON | TWL4030_LED_LEDEN_LEDBON); + + /* + * GPIO list + * - 159 OUT (GPIO5+31): reset for remote camera interface connector. + * - 19 OUT (GPIO1+19): integrated speaker amplifier (1=on, 0=shdn). + * - 20 OUT (GPIO1+20): handset amplifier (1=on, 0=shdn). + */ + + /* Configure GPIOs to output */ + writel(~(GPIO19 | GPIO20), &gpio1_base->oe); + writel(~(GPIO31), &gpio5_base->oe); + + /* Set GPIO values */ + writel((GPIO19 | GPIO20), &gpio1_base->setdataout); + writel(0, &gpio5_base->setdataout); + +#if defined(CONFIG_CMD_NET) + setup_net_chip(); +#endif + + dieid_num_r(); + + return 0; +} + +/* + * Routine: set_muxconf_regs + * Description: Setting up the configuration Mux registers specific to the + * hardware. Many pins need to be moved from protect to primary + * mode. + */ +void set_muxconf_regs(void) +{ + MUX_DIG297(); +} + +#ifdef CONFIG_CMD_NET +/* + * Routine: setup_net_chip + * Description: Setting up the configuration GPMC registers specific to the + * Ethernet hardware. + */ +static void setup_net_chip(void) +{ + struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE; + + /* Configure GPMC registers */ + enable_gpmc_cs_config(gpmc_lan_config, &gpmc_cfg->cs[5], + CONFIG_SMC911X_BASE, GPMC_SIZE_16M); + + /* Enable off mode for NWE in PADCONF_GPMC_NWE register */ + writew(readw(&ctrl_base->gpmc_nwe) | 0x0E00, &ctrl_base->gpmc_nwe); + /* Enable off mode for NOE in PADCONF_GPMC_NADV_ALE register */ + writew(readw(&ctrl_base->gpmc_noe) | 0x0E00, &ctrl_base->gpmc_noe); + /* Enable off mode for ALE in PADCONF_GPMC_NADV_ALE register */ + writew(readw(&ctrl_base->gpmc_nadv_ale) | 0x0E00, + &ctrl_base->gpmc_nadv_ale); + + /* Make GPIO 12 as output pin and send a magic pulse through it */ + if (!omap_request_gpio(NET_LAN9221_RESET_GPIO)) { + omap_set_gpio_direction(NET_LAN9221_RESET_GPIO, 0); + omap_set_gpio_dataout(NET_LAN9221_RESET_GPIO, 1); + udelay(1); + omap_set_gpio_dataout(NET_LAN9221_RESET_GPIO, 0); + udelay(31000); /* Should be >= 30ms according to datasheet */ + omap_set_gpio_dataout(NET_LAN9221_RESET_GPIO, 1); + } +} +#endif /* CONFIG_CMD_NET */ + +int board_eth_init(bd_t *bis) +{ + int rc = 0; + rc = smc911x_initialize(0, CONFIG_SMC911X_BASE); + return rc; +} diff --git a/board/comelit/dig297/dig297.h b/board/comelit/dig297/dig297.h new file mode 100644 index 0000000..68ba7c5 --- /dev/null +++ b/board/comelit/dig297/dig297.h @@ -0,0 +1,383 @@ +/* + * (C) Copyright 2011 Comelit Group SpA + * Luca Ceresoli <luca.ceresoli@comelit.it> + * + * Based on board/ti/beagle/beagle.h: + * (C) Copyright 2008 + * Dirk Behme <dirk.behme@gmail.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _DIG297_H_ +#define _DIG297_H_ + +const omap3_sysinfo sysinfo = { + DDR_STACKED, + "OMAP3 DIG297 board", + "NAND", +}; + +/* + * IEN - Input Enable + * IDIS - Input Disable + * PTD - Pull type Down + * PTU - Pull type Up + * DIS - Pull type selection is inactive + * EN - Pull type selection is active + * M0 - Mode 0 + * The commented string gives the final mux configuration for that pin + */ +#define MUX_DIG297() \ +/*SDRC*/\ + MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) /*SDRC_D0*/\ + MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) /*SDRC_D1*/\ + MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) /*SDRC_D2*/\ + MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) /*SDRC_D3*/\ + MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) /*SDRC_D4*/\ + MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) /*SDRC_D5*/\ + MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) /*SDRC_D6*/\ + MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) /*SDRC_D7*/\ + MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) /*SDRC_D8*/\ + MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) /*SDRC_D9*/\ + MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) /*SDRC_D10*/\ + MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) /*SDRC_D11*/\ + MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) /*SDRC_D12*/\ + MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) /*SDRC_D13*/\ + MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) /*SDRC_D14*/\ + MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) /*SDRC_D15*/\ + MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) /*SDRC_D16*/\ + MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) /*SDRC_D17*/\ + MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) /*SDRC_D18*/\ + MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) /*SDRC_D19*/\ + MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) /*SDRC_D20*/\ + MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) /*SDRC_D21*/\ + MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) /*SDRC_D22*/\ + MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) /*SDRC_D23*/\ + MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) /*SDRC_D24*/\ + MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) /*SDRC_D25*/\ + MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) /*SDRC_D26*/\ + MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) /*SDRC_D27*/\ + MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) /*SDRC_D28*/\ + MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) /*SDRC_D29*/\ + MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) /*SDRC_D30*/\ + MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) /*SDRC_D31*/\ + MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) /*SDRC_CLK*/\ + MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)) /*SDRC_DQS0*/\ + MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)) /*SDRC_DQS1*/\ + MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)) /*SDRC_DQS2*/\ + MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)) /*SDRC_DQS3*/\ + MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0)) /*sdrc_cke0*/\ + MUX_VAL(CP(SDRC_CKE1), (IDIS | PTU | DIS | M0)) /*sdrc_cke1: NC*/\ +/*GPMC*/\ + MUX_VAL(CP(GPMC_A1), (IDIS | PTU | EN | M0)) /*GPMC_A1*/\ + MUX_VAL(CP(GPMC_A2), (IDIS | PTU | EN | M0)) /*GPMC_A2*/\ + MUX_VAL(CP(GPMC_A3), (IDIS | PTU | EN | M0)) /*GPMC_A3*/\ + MUX_VAL(CP(GPMC_A4), (IDIS | PTU | EN | M0)) /*GPMC_A4*/\ + MUX_VAL(CP(GPMC_A5), (IDIS | PTU | EN | M0)) /*GPMC_A5*/\ + MUX_VAL(CP(GPMC_A6), (IDIS | PTU | EN | M0)) /*GPMC_A6*/\ + MUX_VAL(CP(GPMC_A7), (IDIS | PTU | EN | M0)) /*GPMC_A7*/\ + MUX_VAL(CP(GPMC_A8), (IDIS | PTU | EN | M0)) /*GPMC_A8*/\ + MUX_VAL(CP(GPMC_A9), (IDIS | PTU | EN | M0)) /*GPMC_A9*/\ + MUX_VAL(CP(GPMC_A10), (IDIS | PTU | EN | M0)) /*GPMC_A10*/\ + MUX_VAL(CP(GPMC_D0), (IEN | PTU | EN | M0)) /*GPMC_D0*/\ + MUX_VAL(CP(GPMC_D1), (IEN | PTU | EN | M0)) /*GPMC_D1*/\ + MUX_VAL(CP(GPMC_D2), (IEN | PTU | EN | M0)) /*GPMC_D2*/\ + MUX_VAL(CP(GPMC_D3), (IEN | PTU | EN | M0)) /*GPMC_D3*/\ + MUX_VAL(CP(GPMC_D4), (IEN | PTU | EN | M0)) /*GPMC_D4*/\ + MUX_VAL(CP(GPMC_D5), (IEN | PTU | EN | M0)) /*GPMC_D5*/\ + MUX_VAL(CP(GPMC_D6), (IEN | PTU | EN | M0)) /*GPMC_D6*/\ + MUX_VAL(CP(GPMC_D7), (IEN | PTU | EN | M0)) /*GPMC_D7*/\ + MUX_VAL(CP(GPMC_D8), (IEN | PTU | EN | M0)) /*GPMC_D8*/\ + MUX_VAL(CP(GPMC_D9), (IEN | PTU | EN | M0)) /*GPMC_D9*/\ + MUX_VAL(CP(GPMC_D10), (IEN | PTU | EN | M0)) /*GPMC_D10*/\ + MUX_VAL(CP(GPMC_D11), (IEN | PTU | EN | M0)) /*GPMC_D11*/\ + MUX_VAL(CP(GPMC_D12), (IEN | PTU | EN | M0)) /*GPMC_D12*/\ + MUX_VAL(CP(GPMC_D13), (IEN | PTU | EN | M0)) /*GPMC_D13*/\ + MUX_VAL(CP(GPMC_D14), (IEN | PTU | EN | M0)) /*GPMC_D14*/\ + MUX_VAL(CP(GPMC_D15), (IEN | PTU | EN | M0)) /*GPMC_D15*/\ + MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0)) /*NAND*/\ + /* GPMC_nCS1/2: not available on CUS package*/\ + MUX_VAL(CP(GPMC_NCS3), (IDIS | PTU | DIS | M0)) /*GPMC_nCS3*/\ + MUX_VAL(CP(GPMC_NCS4), (IDIS | PTU | DIS | M0)) /*GPMC_nCS4*/\ + MUX_VAL(CP(GPMC_NCS5), (IDIS | PTU | EN | M0)) /*GPMC_nCS5*/\ + MUX_VAL(CP(GPMC_NCS6), (IEN | PTD | DIS | M1)) /*SYS_nDMA_REQ2*/\ + MUX_VAL(CP(GPMC_NCS7), (IEN | PTU | EN | M1)) /*SYS_nDMA_REQ3*/\ + MUX_VAL(CP(GPMC_NBE1), (IDIS | PTD | DIS | M0)) /*GPMC_nBE1: NC*/\ + /* GPMC_WAIT2: not available on CUS package*/\ + MUX_VAL(CP(GPMC_WAIT3), (IDIS | PTU | DIS | M0)) /*GPMC_WAIT3: NC*/\ + /* GPMC_CLK: NC (only asyncronous peripherals are connected) */\ + MUX_VAL(CP(GPMC_CLK), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0)) /*GPMC_nADV_ALE*/\ + MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0)) /*GPMC_nOE*/\ + MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0)) /*GPMC_nWE*/\ + MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTD | DIS | M0)) /*GPMC_nBE0_CLE*/\ + MUX_VAL(CP(GPMC_NWP), (IEN | PTD | DIS | M0)) /*GPMC_nWP*/\ + MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) /*GPMC_WAIT0*/\ + /* GPMC_WAIT1: not available on CUS package*/\ +/*DSS*/\ + MUX_VAL(CP(DSS_PCLK), (IDIS | PTD | DIS | M0)) /*DSS_PCLK*/\ + MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0)) /*DSS_HSYNC*/\ + MUX_VAL(CP(DSS_VSYNC), (IDIS | PTD | DIS | M0)) /*DSS_VSYNC*/\ + /* DSS_ACBIAS: AC BIAS: connected to TFT, not to be driven */\ + MUX_VAL(CP(DSS_ACBIAS), (IDIS | PTU | EN | M7))\ + MUX_VAL(CP(DSS_DATA0), (IDIS | PTD | DIS | M0)) /*DSS_DATA0*/\ + MUX_VAL(CP(DSS_DATA1), (IDIS | PTD | DIS | M0)) /*DSS_DATA1*/\ + MUX_VAL(CP(DSS_DATA2), (IDIS | PTD | DIS | M0)) /*DSS_DATA2*/\ + MUX_VAL(CP(DSS_DATA3), (IDIS | PTD | DIS | M0)) /*DSS_DATA3*/\ + MUX_VAL(CP(DSS_DATA4), (IDIS | PTD | DIS | M0)) /*DSS_DATA4*/\ + MUX_VAL(CP(DSS_DATA5), (IDIS | PTD | DIS | M0)) /*DSS_DATA5*/\ + MUX_VAL(CP(DSS_DATA6), (IDIS | PTD | DIS | M0)) /*DSS_DATA6*/\ + MUX_VAL(CP(DSS_DATA7), (IDIS | PTD | DIS | M0)) /*DSS_DATA7*/\ + MUX_VAL(CP(DSS_DATA8), (IDIS | PTD | DIS | M0)) /*DSS_DATA8*/\ + MUX_VAL(CP(DSS_DATA9), (IDIS | PTD | DIS | M0)) /*DSS_DATA9*/\ + MUX_VAL(CP(DSS_DATA10), (IDIS | PTD | DIS | M0)) /*DSS_DATA10*/\ + MUX_VAL(CP(DSS_DATA11), (IDIS | PTD | DIS | M0)) /*DSS_DATA11*/\ + MUX_VAL(CP(DSS_DATA12), (IDIS | PTD | DIS | M0)) /*DSS_DATA12*/\ + MUX_VAL(CP(DSS_DATA13), (IDIS | PTD | DIS | M0)) /*DSS_DATA13*/\ + MUX_VAL(CP(DSS_DATA14), (IDIS | PTD | DIS | M0)) /*DSS_DATA14*/\ + MUX_VAL(CP(DSS_DATA15), (IDIS | PTD | DIS | M0)) /*DSS_DATA15*/\ + MUX_VAL(CP(DSS_DATA16), (IDIS | PTD | DIS | M0)) /*DSS_DATA16*/\ + MUX_VAL(CP(DSS_DATA17), (IDIS | PTD | DIS | M0)) /*DSS_DATA17*/\ + MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0)) /*DSS_DATA18*/\ + MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0)) /*DSS_DATA19*/\ + MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0)) /*DSS_DATA20*/\ + MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0)) /*DSS_DATA21*/\ + MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0)) /*DSS_DATA22*/\ + MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0)) /*DSS_DATA23*/\ +/*CAMERA*/\ + MUX_VAL(CP(CAM_HS), (IEN | PTU | EN | M0)) /*CAM_HS */\ + MUX_VAL(CP(CAM_VS), (IEN | PTU | EN | M0)) /*CAM_VS */\ + MUX_VAL(CP(CAM_XCLKA), (IDIS | PTD | DIS | M0)) /*CAM_XCLKA*/\ + MUX_VAL(CP(CAM_PCLK), (IEN | PTU | EN | M0)) /*CAM_PCLK*/\ + MUX_VAL(CP(CAM_FLD), (IDIS | PTD | DIS | M4)) /*GPIO_98*/\ + MUX_VAL(CP(CAM_D0), (IEN | PTD | DIS | M0)) /*CAM_D0*/\ + MUX_VAL(CP(CAM_D1), (IEN | PTD | DIS | M0)) /*CAM_D1*/\ + MUX_VAL(CP(CAM_D2), (IEN | PTD | DIS | M0)) /*CAM_D2*/\ + MUX_VAL(CP(CAM_D3), (IEN | PTD | DIS | M0)) /*CAM_D3*/\ + MUX_VAL(CP(CAM_D4), (IEN | PTD | DIS | M0)) /*CAM_D4*/\ + MUX_VAL(CP(CAM_D5), (IEN | PTD | DIS | M0)) /*CAM_D5*/\ + MUX_VAL(CP(CAM_D6), (IEN | PTD | DIS | M0)) /*CAM_D6*/\ + MUX_VAL(CP(CAM_D7), (IEN | PTD | DIS | M0)) /*CAM_D7*/\ + MUX_VAL(CP(CAM_D8), (IEN | PTD | DIS | M0)) /*CAM_D8*/\ + MUX_VAL(CP(CAM_D9), (IEN | PTD | DIS | M0)) /*CAM_D9*/\ + MUX_VAL(CP(CAM_D10), (IEN | PTD | DIS | M0)) /*CAM_D10*/\ + MUX_VAL(CP(CAM_D11), (IEN | PTD | DIS | M0)) /*CAM_D11*/\ + MUX_VAL(CP(CAM_XCLKB), (IDIS | PTD | DIS | M0)) /*CAM_XCLKB*/\ + MUX_VAL(CP(CAM_WEN), (IEN | PTD | DIS | M4)) /*GPIO_167*/\ + MUX_VAL(CP(CAM_STROBE), (IDIS | PTD | DIS | M0)) /*CAM_STROBE*/\ + MUX_VAL(CP(CSI2_DX0), (IEN | PTD | DIS | M0)) /*CSI2_DX0*/\ + MUX_VAL(CP(CSI2_DY0), (IEN | PTD | DIS | M0)) /*CSI2_DY0*/\ + MUX_VAL(CP(CSI2_DX1), (IEN | PTD | DIS | M0)) /*CSI2_DX1*/\ + MUX_VAL(CP(CSI2_DY1), (IEN | PTD | DIS | M0)) /*CSI2_DY1*/\ +/*Audio Interface */\ + MUX_VAL(CP(MCBSP2_FSX), (IEN | PTD | DIS | M0)) /*McBSP2_FSX*/\ + MUX_VAL(CP(MCBSP2_CLKX), (IEN | PTD | DIS | M0)) /*McBSP2_CLKX*/\ + MUX_VAL(CP(MCBSP2_DR), (IEN | PTD | DIS | M0)) /*McBSP2_DR*/\ + MUX_VAL(CP(MCBSP2_DX), (IDIS | PTD | DIS | M0)) /*McBSP2_DX*/\ +/*Expansion card */\ + MUX_VAL(CP(MMC1_CLK), (IDIS | PTU | EN | M0)) /*MMC1_CLK*/\ + MUX_VAL(CP(MMC1_CMD), (IEN | PTU | EN | M0)) /*MMC1_CMD*/\ + MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | EN | M0)) /*MMC1_DAT0*/\ + MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | EN | M0)) /*MMC1_DAT1*/\ + MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | EN | M0)) /*MMC1_DAT2*/\ + MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | EN | M0)) /*MMC1_DAT3*/\ + MUX_VAL(CP(MMC1_DAT4), (IEN | PTU | EN | M0)) /*MMC1_DAT4*/\ + MUX_VAL(CP(MMC1_DAT5), (IEN | PTU | EN | M0)) /*MMC1_DAT5*/\ + MUX_VAL(CP(MMC1_DAT6), (IEN | PTU | EN | M0)) /*MMC1_DAT6*/\ + MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | EN | M0)) /*MMC1_DAT7*/\ +/*Wireless LAN */\ + MUX_VAL(CP(MMC2_CLK), (IEN | PTU | EN | M4)) /*GPIO_130*/\ + MUX_VAL(CP(MMC2_CMD), (IEN | PTU | EN | M4)) /*GPIO_131*/\ + MUX_VAL(CP(MMC2_DAT0), (IEN | PTU | EN | M4)) /*GPIO_132*/\ + MUX_VAL(CP(MMC2_DAT1), (IEN | PTU | EN | M4)) /*GPIO_133*/\ + MUX_VAL(CP(MMC2_DAT2), (IEN | PTU | EN | M4)) /*GPIO_134*/\ + MUX_VAL(CP(MMC2_DAT3), (IEN | PTU | EN | M4)) /*GPIO_135*/\ + MUX_VAL(CP(MMC2_DAT4), (IEN | PTU | EN | M4)) /*GPIO_136*/\ + MUX_VAL(CP(MMC2_DAT5), (IEN | PTU | EN | M4)) /*GPIO_137*/\ + MUX_VAL(CP(MMC2_DAT6), (IEN | PTU | EN | M4)) /*GPIO_138*/\ + MUX_VAL(CP(MMC2_DAT7), (IEN | PTU | EN | M4)) /*GPIO_139*/\ +/*Bluetooth*/\ + MUX_VAL(CP(MCBSP3_DX), (IEN | PTD | DIS | M1)) /*UART2_CTS*/\ + MUX_VAL(CP(MCBSP3_DR), (IDIS | PTD | DIS | M1)) /*UART2_RTS*/\ + MUX_VAL(CP(MCBSP3_CLKX), (IDIS | PTD | DIS | M1)) /*UART2_TX*/\ + MUX_VAL(CP(MCBSP3_FSX), (IEN | PTD | DIS | M1)) /*UART2_RX*/\ + MUX_VAL(CP(UART2_CTS), (IEN | PTD | DIS | M4)) /*GPIO_144*/\ + MUX_VAL(CP(UART2_RTS), (IEN | PTD | DIS | M4)) /*GPIO_145*/\ + MUX_VAL(CP(UART2_TX), (IEN | PTD | DIS | M4)) /*GPIO_146*/\ + MUX_VAL(CP(UART2_RX), (IEN | PTD | DIS | M4)) /*GPIO_147*/\ +/*Modem Interface */\ + MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) /*UART1_TX*/\ + MUX_VAL(CP(UART1_RTS), (IDIS | PTD | DIS | M4)) /*GPIO_149*/ \ + MUX_VAL(CP(UART1_CTS), (IDIS | PTD | DIS | M4)) /*GPIO_150*/ \ + MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) /*UART1_RX*/\ + MUX_VAL(CP(MCBSP4_CLKX), (IEN | PTD | DIS | M1)) /*SSI1_DAT_RX*/\ + MUX_VAL(CP(MCBSP4_DR), (IEN | PTD | DIS | M1)) /*SSI1_FLAG_RX*/\ + MUX_VAL(CP(MCBSP4_DX), (IEN | PTD | DIS | M1)) /*SSI1_RDY_RX*/\ + MUX_VAL(CP(MCBSP4_FSX), (IEN | PTD | DIS | M1)) /*SSI1_WAKE*/\ + MUX_VAL(CP(MCBSP_CLKS), (IEN | PTU | DIS | M0)) /*McBSP_CLKS*/\ +/*Serial Interface*/\ + MUX_VAL(CP(UART3_CTS_RCTX), (IEN | PTD | EN | M0)) /*UART3_CTS_RCTX*/\ + MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0)) /*UART3_RX_IRRX*/\ + MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0)) /*UART3_TX_IRTX*/\ + MUX_VAL(CP(HSUSB0_CLK), (IEN | PTD | DIS | M0)) /*HSUSB0_CLK*/\ + MUX_VAL(CP(HSUSB0_STP), (IDIS | PTU | EN | M0)) /*HSUSB0_STP*/\ + MUX_VAL(CP(HSUSB0_DIR), (IEN | PTD | DIS | M0)) /*HSUSB0_DIR*/\ + MUX_VAL(CP(HSUSB0_NXT), (IEN | PTD | DIS | M0)) /*HSUSB0_NXT*/\ + MUX_VAL(CP(HSUSB0_DATA0), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA0*/\ + MUX_VAL(CP(HSUSB0_DATA1), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA1*/\ + MUX_VAL(CP(HSUSB0_DATA2), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA2*/\ + MUX_VAL(CP(HSUSB0_DATA3), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA3*/\ + MUX_VAL(CP(HSUSB0_DATA4), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA4*/\ + MUX_VAL(CP(HSUSB0_DATA5), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA5*/\ + MUX_VAL(CP(HSUSB0_DATA6), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA6*/\ + MUX_VAL(CP(HSUSB0_DATA7), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA7*/\ + MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)) /*I2C1_SCL*/\ + MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0)) /*I2C1_SDA*/\ + MUX_VAL(CP(I2C2_SCL), (IEN | PTU | EN | M4)) /*GPIO_168*/\ + MUX_VAL(CP(I2C2_SDA), (IEN | PTU | EN | M4)) /*GPIO_183*/\ + MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0)) /*I2C3_SCL*/\ + MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0)) /*I2C3_SDA*/\ + MUX_VAL(CP(I2C4_SCL), (IEN | PTU | EN | M0)) /*I2C4_SCL*/\ + MUX_VAL(CP(I2C4_SDA), (IEN | PTU | EN | M0)) /*I2C4_SDA*/\ +/* USB EHCI (port 2) */\ + MUX_VAL(CP(ETK_D14_ES2), (IEN | PTU | DIS | M3)) /*HSUSB2_DATA0*/\ + MUX_VAL(CP(ETK_D15_ES2), (IEN | PTU | DIS | M3)) /*HSUSB2_DATA1*/\ +/* MCSPI1: to TOUCH controller TSC2046 (ADS7846 compatible).*/\ + /* + * McSPI1_CLK. + * IEN needed fot the McSPI to "receive" the clock and be able to + * sample SOMI. See http://e2e.ti.com/support/arm174_microprocessors/ + * omap_applications_processors/f/42/p/29444/102394.aspx#102394 + */\ + MUX_VAL(CP(MCSPI1_CLK), (IEN | PTD | EN | M0))\ + MUX_VAL(CP(MCSPI1_SIMO), (IDIS | PTD | EN | M0)) /*McSPI1_SIMO*/\ + MUX_VAL(CP(MCSPI1_SOMI), (IEN | PTD | EN | M0)) /*McSPI1_SOMI*/\ + MUX_VAL(CP(MCSPI1_CS0), (IDIS | PTU | EN | M0)) /*McSPI1_CS0*/\ +/* MCSPI2: to HIMAX TFT controller.*/\ + MUX_VAL(CP(MCSPI2_CLK), (IDIS | PTD | EN | M0)) /*MCSPI2_CLK*/\ + MUX_VAL(CP(MCSPI2_SIMO), (IDIS | PTD | EN | M0)) /*MCSPI3_SIMO*/\ + /* MCSPI3_SOMI: NC because HIMAX in monodirectional (no SOMI line) */\ + MUX_VAL(CP(MCSPI2_SOMI), (IDIS | PTU | DIS | M7))\ + MUX_VAL(CP(MCSPI2_CS0), (IDIS | PTU | EN | M0)) /*MCSPI3_CS0*/\ + MUX_VAL(CP(MCSPI2_CS1), (IDIS | PTU | DIS | M7)) /*Safe mode: NC*/\ +/* GPIO */\ + MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M4)) /*GPIO_7*/\ + MUX_VAL(CP(ETK_CLK_ES2), (IDIS | PTU | EN | M4)) /*GPIO_12*/\ + MUX_VAL(CP(ETK_CTL_ES2), (IEN | PTU | EN | M4)) /*GPIO_13*/\ + MUX_VAL(CP(ETK_D0_ES2), (IEN | PTU | DIS | M4)) /*GPIO_14*/\ + MUX_VAL(CP(ETK_D1_ES2), (IDIS | PTD | EN | M4)) /*GPIO_15*/\ + MUX_VAL(CP(ETK_D2_ES2), (IDIS | PTD | EN | M4)) /*GPIO_16*/\ + MUX_VAL(CP(ETK_D3_ES2), (IEN | PTU | DIS | M4)) /*GPIO_17*/\ + MUX_VAL(CP(ETK_D4_ES2), (IDIS | PTD | EN | M4)) /*GPIO_18*/\ + MUX_VAL(CP(ETK_D5_ES2), (IDIS | PTD | EN | M4)) /*GPIO_19*/\ + MUX_VAL(CP(ETK_D6_ES2), (IDIS | PTD | EN | M4)) /*GPIO_20*/\ + MUX_VAL(CP(ETK_D7_ES2), (IDIS | PTD | EN | M4)) /*GPIO_21*/\ + MUX_VAL(CP(ETK_D9_ES2), (IEN | PTU | DIS | M4)) /*GPIO_23*/\ + MUX_VAL(CP(ETK_D10_ES2), (IDIS | PTD | EN | M4)) /*GPIO_24*/\ + MUX_VAL(CP(ETK_D11_ES2), (IDIS | PTD | EN | M4)) /*GPIO_25*/\ + MUX_VAL(CP(ETK_D12_ES2), (IDIS | PTD | EN | M4)) /*GPIO_26*/\ + MUX_VAL(CP(ETK_D13_ES2), (IDIS | PTD | EN | M4)) /*GPIO_27*/\ + MUX_VAL(CP(MCBSP1_CLKR), (IEN | PTD | DIS | M4)) /*GPIO_156*/\ + MUX_VAL(CP(MCBSP1_FSR), (IEN | PTU | EN | M4)) /*GPIO_157*/\ + MUX_VAL(CP(MCBSP1_DX), (IEN | PTD | DIS | M4)) /*GPIO_158*/\ + MUX_VAL(CP(MCBSP1_DR), (IDIS | PTD | DIS | M4)) /*GPIO_159*/\ + MUX_VAL(CP(MCBSP1_FSX), (IEN | PTD | DIS | M4)) /*GPIO_161*/\ + MUX_VAL(CP(MCBSP1_CLKX), (IEN | PTD | DIS | M4)) /*GPIO_162*/\ + MUX_VAL(CP(UART3_RTS_SD), (IDIS | PTD | EN | M4)) /*GPIO_164*/\ + MUX_VAL(CP(HDQ_SIO), (IDIS | PTU | DIS | M4)) /*GPIO_170*/\ + MUX_VAL(CP(MCSPI1_CS3), (IEN | PTU | EN | M4)) /*GPIO_177*/\ +/*Control and debug */\ + MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) /*SYS_32K*/\ + MUX_VAL(CP(SYS_CLKREQ), (IEN | PTD | DIS | M0)) /*SYS_CLKREQ*/\ + MUX_VAL(CP(SYS_NIRQ), (IEN | PTU | EN | M0)) /*SYS_nIRQ*/\ + MUX_VAL(CP(SYS_BOOT0), (IEN | PTD | DIS | M4)) /*GPIO_2*/\ + MUX_VAL(CP(SYS_BOOT1), (IEN | PTD | DIS | M4)) /*GPIO_3*/\ + MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4)) /*GPIO_4*/\ + MUX_VAL(CP(SYS_BOOT3), (IEN | PTD | DIS | M4)) /*GPIO_5*/\ + MUX_VAL(CP(SYS_BOOT4), (IEN | PTD | DIS | M4)) /*GPIO_6*/\ + MUX_VAL(CP(SYS_BOOT6), (IDIS | PTD | DIS | M4)) /*GPIO_8*/ \ + MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0)) /*SYS_OFF_MODE*/\ + MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0)) /*SYS_CLKOUT1*/\ + MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M4)) /*GPIO_186*/\ + MUX_VAL(CP(ETK_D8_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DIR*/\ + MUX_VAL(CP(D2D_MCAD1), (IEN | PTD | EN | M0)) /*d2d_mcad1*/\ + MUX_VAL(CP(D2D_MCAD2), (IEN | PTD | EN | M0)) /*d2d_mcad2*/\ + MUX_VAL(CP(D2D_MCAD3), (IEN | PTD | EN | M0)) /*d2d_mcad3*/\ + MUX_VAL(CP(D2D_MCAD4), (IEN | PTD | EN | M0)) /*d2d_mcad4*/\ + MUX_VAL(CP(D2D_MCAD5), (IEN | PTD | EN | M0)) /*d2d_mcad5*/\ + MUX_VAL(CP(D2D_MCAD6), (IEN | PTD | EN | M0)) /*d2d_mcad6*/\ + MUX_VAL(CP(D2D_MCAD7), (IEN | PTD | EN | M0)) /*d2d_mcad7*/\ + MUX_VAL(CP(D2D_MCAD8), (IEN | PTD | EN | M0)) /*d2d_mcad8*/\ + MUX_VAL(CP(D2D_MCAD9), (IEN | PTD | EN | M0)) /*d2d_mcad9*/\ + MUX_VAL(CP(D2D_MCAD10), (IEN | PTD | EN | M0)) /*d2d_mcad10*/\ + MUX_VAL(CP(D2D_MCAD11), (IEN | PTD | EN | M0)) /*d2d_mcad11*/\ + MUX_VAL(CP(D2D_MCAD12), (IEN | PTD | EN | M0)) /*d2d_mcad12*/\ + MUX_VAL(CP(D2D_MCAD13), (IEN | PTD | EN | M0)) /*d2d_mcad13*/\ + MUX_VAL(CP(D2D_MCAD14), (IEN | PTD | EN | M0)) /*d2d_mcad14*/\ + MUX_VAL(CP(D2D_MCAD15), (IEN | PTD | EN | M0)) /*d2d_mcad15*/\ + MUX_VAL(CP(D2D_MCAD16), (IEN | PTD | EN | M0)) /*d2d_mcad16*/\ + MUX_VAL(CP(D2D_MCAD17), (IEN | PTD | EN | M0)) /*d2d_mcad17*/\ + MUX_VAL(CP(D2D_MCAD18), (IEN | PTD | EN | M0)) /*d2d_mcad18*/\ + MUX_VAL(CP(D2D_MCAD19), (IEN | PTD | EN | M0)) /*d2d_mcad19*/\ + MUX_VAL(CP(D2D_MCAD20), (IEN | PTD | EN | M0)) /*d2d_mcad20*/\ + MUX_VAL(CP(D2D_MCAD21), (IEN | PTD | EN | M0)) /*d2d_mcad21*/\ + MUX_VAL(CP(D2D_MCAD22), (IEN | PTD | EN | M0)) /*d2d_mcad22*/\ + MUX_VAL(CP(D2D_MCAD23), (IEN | PTD | EN | M0)) /*d2d_mcad23*/\ + MUX_VAL(CP(D2D_MCAD24), (IEN | PTD | EN | M0)) /*d2d_mcad24*/\ + MUX_VAL(CP(D2D_MCAD25), (IEN | PTD | EN | M0)) /*d2d_mcad25*/\ + MUX_VAL(CP(D2D_MCAD26), (IEN | PTD | EN | M0)) /*d2d_mcad26*/\ + MUX_VAL(CP(D2D_MCAD27), (IEN | PTD | EN | M0)) /*d2d_mcad27*/\ + MUX_VAL(CP(D2D_MCAD28), (IEN | PTD | EN | M0)) /*d2d_mcad28*/\ + MUX_VAL(CP(D2D_MCAD29), (IEN | PTD | EN | M0)) /*d2d_mcad29*/\ + MUX_VAL(CP(D2D_MCAD30), (IEN | PTD | EN | M0)) /*d2d_mcad30*/\ + MUX_VAL(CP(D2D_MCAD31), (IEN | PTD | EN | M0)) /*d2d_mcad31*/\ + MUX_VAL(CP(D2D_MCAD32), (IEN | PTD | EN | M0)) /*d2d_mcad32*/\ + MUX_VAL(CP(D2D_MCAD33), (IEN | PTD | EN | M0)) /*d2d_mcad33*/\ + MUX_VAL(CP(D2D_MCAD34), (IEN | PTD | EN | M0)) /*d2d_mcad34*/\ + MUX_VAL(CP(D2D_MCAD35), (IEN | PTD | EN | M0)) /*d2d_mcad35*/\ + MUX_VAL(CP(D2D_MCAD36), (IEN | PTD | EN | M0)) /*d2d_mcad36*/\ + MUX_VAL(CP(D2D_CLK26MI), (IEN | PTD | DIS | M0)) /*d2d_clk26mi*/\ + MUX_VAL(CP(D2D_NRESPWRON), (IEN | PTD | EN | M0)) /*d2d_nrespwron*/\ + MUX_VAL(CP(D2D_NRESWARM), (IEN | PTU | EN | M0)) /*d2d_nreswarm */\ + MUX_VAL(CP(D2D_ARM9NIRQ), (IEN | PTD | DIS | M0)) /*d2d_arm9nirq */\ + MUX_VAL(CP(D2D_UMA2P6FIQ), (IEN | PTD | DIS | M0)) /*d2d_uma2p6fiq*/\ + MUX_VAL(CP(D2D_SPINT), (IEN | PTD | EN | M0)) /*d2d_spint*/\ + MUX_VAL(CP(D2D_FRINT), (IEN | PTD | EN | M0)) /*d2d_frint*/\ + MUX_VAL(CP(D2D_DMAREQ0), (IEN | PTD | DIS | M0)) /*d2d_dmareq0*/\ + MUX_VAL(CP(D2D_DMAREQ1), (IEN | PTD | DIS | M0)) /*d2d_dmareq1*/\ + MUX_VAL(CP(D2D_DMAREQ2), (IEN | PTD | DIS | M0)) /*d2d_dmareq2*/\ + MUX_VAL(CP(D2D_DMAREQ3), (IEN | PTD | DIS | M0)) /*d2d_dmareq3*/\ + MUX_VAL(CP(D2D_N3GTRST), (IEN | PTD | DIS | M0)) /*d2d_n3gtrst*/\ + MUX_VAL(CP(D2D_N3GTDI), (IEN | PTD | DIS | M0)) /*d2d_n3gtdi*/\ + MUX_VAL(CP(D2D_N3GTDO), (IEN | PTD | DIS | M0)) /*d2d_n3gtdo*/\ + MUX_VAL(CP(D2D_N3GTMS), (IEN | PTD | DIS | M0)) /*d2d_n3gtms*/\ + MUX_VAL(CP(D2D_N3GTCK), (IEN | PTD | DIS | M0)) /*d2d_n3gtck*/\ + MUX_VAL(CP(D2D_N3GRTCK), (IEN | PTD | DIS | M0)) /*d2d_n3grtck*/\ + MUX_VAL(CP(D2D_MSTDBY), (IEN | PTU | EN | M0)) /*d2d_mstdby*/\ + MUX_VAL(CP(D2D_SWAKEUP), (IEN | PTD | EN | M0)) /*d2d_swakeup*/\ + MUX_VAL(CP(D2D_IDLEREQ), (IEN | PTD | DIS | M0)) /*d2d_idlereq*/\ + MUX_VAL(CP(D2D_IDLEACK), (IEN | PTU | EN | M0)) /*d2d_idleack*/\ + MUX_VAL(CP(D2D_MWRITE), (IEN | PTD | DIS | M0)) /*d2d_mwrite*/\ + MUX_VAL(CP(D2D_SWRITE), (IEN | PTD | DIS | M0)) /*d2d_swrite*/\ + MUX_VAL(CP(D2D_MREAD), (IEN | PTD | DIS | M0)) /*d2d_mread*/\ + MUX_VAL(CP(D2D_SREAD), (IEN | PTD | DIS | M0)) /*d2d_sread*/\ + MUX_VAL(CP(D2D_MBUSFLAG), (IEN | PTD | DIS | M0)) /*d2d_mbusflag*/\ + MUX_VAL(CP(D2D_SBUSFLAG), (IEN | PTD | DIS | M0)) /*d2d_sbusflag */ + +#endif diff --git a/board/dave/PPChameleonEVB/u-boot.lds b/board/dave/PPChameleonEVB/u-boot.lds index 20c32b7..3b10114 100644 --- a/board/dave/PPChameleonEVB/u-boot.lds +++ b/board/dave/PPChameleonEVB/u-boot.lds @@ -55,9 +55,10 @@ SECTIONS PROVIDE (erotext = .); .reloc : { - KEEP(*(.got)) _GOT2_TABLE_ = .; KEEP(*(.got2)) + KEEP(*(.got)) + PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); _FIXUP_TABLE_ = .; KEEP(*(.fixup)) } diff --git a/board/davedenx/qong/fpga.c b/board/davedenx/qong/fpga.c index 656d5cd..789acf0 100644 --- a/board/davedenx/qong/fpga.c +++ b/board/davedenx/qong/fpga.c @@ -23,8 +23,8 @@ */ #include <common.h> -#include <asm/arch/mx31.h> -#include <asm/arch/mx31-regs.h> +#include <asm/arch/clock.h> +#include <asm/arch/imx-regs.h> #include <mxc_gpio.h> #include <fpga.h> #include <lattice.h> diff --git a/board/davedenx/qong/lowlevel_init.S b/board/davedenx/qong/lowlevel_init.S index 80bed92..85fbfc3 100644 --- a/board/davedenx/qong/lowlevel_init.S +++ b/board/davedenx/qong/lowlevel_init.S @@ -20,7 +20,7 @@ * MA 02111-1307 USA */ -#include <asm/arch/mx31-regs.h> +#include <asm/arch/imx-regs.h> .macro REG reg, val ldr r2, =\reg diff --git a/board/davedenx/qong/qong.c b/board/davedenx/qong/qong.c index 8a81cfc..b1238d5 100644 --- a/board/davedenx/qong/qong.c +++ b/board/davedenx/qong/qong.c @@ -23,16 +23,24 @@ #include <common.h> #include <netdev.h> -#include <asm/arch/mx31.h> -#include <asm/arch/mx31-regs.h> +#include <asm/arch/clock.h> +#include <asm/arch/imx-regs.h> #include <asm/io.h> #include <nand.h> #include <fsl_pmic.h> #include <mxc_gpio.h> #include "qong_fpga.h" +#include <watchdog.h> DECLARE_GLOBAL_DATA_PTR; +#ifdef CONFIG_HW_WATCHDOG +void hw_watchdog_reset(void) +{ + mxc_hw_watchdog_reset(); +} +#endif + int dram_init (void) { /* dram_init must store complete ramsize in gd->ram_size */ @@ -202,6 +210,10 @@ int board_late_init(void) pmic_reg_write(REG_POWER_CTL0, val | COINCHEN); pmic_reg_write(REG_INT_STATUS1, RTCRSTI); +#ifdef CONFIG_HW_WATCHDOG + mxc_hw_watchdog_enable(); +#endif + return 0; } diff --git a/board/davinci/ea20/Makefile b/board/davinci/ea20/Makefile index ddd2564..67ec461 100644 --- a/board/davinci/ea20/Makefile +++ b/board/davinci/ea20/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk -LIB = $(obj)lib$(BOARD).a +LIB = $(obj)lib$(BOARD).o COBJS-y += ea20.o diff --git a/board/digsy_mtc/digsy_mtc.c b/board/digsy_mtc/digsy_mtc.c index cbfdc9e..9f13a3d 100644 --- a/board/digsy_mtc/digsy_mtc.c +++ b/board/digsy_mtc/digsy_mtc.c @@ -42,6 +42,7 @@ #if defined(CONFIG_DIGSY_REV5) #include "is45s16800a2.h" #include <mtd/cfi_flash.h> +#include <flash.h> #else #include "is42s16800a-7t.h" #endif @@ -398,6 +399,7 @@ int update_flash_size (int flash_size) size += flash_get_size(base, i); } } + flash_protect_default(); gd->bd->bi_flashstart = base; return 0; } @@ -405,6 +407,9 @@ int update_flash_size (int flash_size) void ft_board_setup(void *blob, bd_t *bd) { + int phy_addr = CONFIG_PHY_ADDR; + char eth_path[] = "/soc5200@f0000000/mdio@3000/ethernet-phy@0"; + ft_cpu_setup(blob, bd); /* * There are 2 RTC nodes in the DTS, so remove @@ -422,5 +427,7 @@ void ft_board_setup(void *blob, bd_t *bd) #endif ft_adapt_flash_base(blob); #endif + /* fix up the phy address */ + do_fixup_by_path(blob, eth_path, "reg", &phy_addr, sizeof(int), 0); } #endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/board/dnp5370/Makefile b/board/dnp5370/Makefile new file mode 100644 index 0000000..0d17676 --- /dev/null +++ b/board/dnp5370/Makefile @@ -0,0 +1,54 @@ +# +# U-boot - Makefile +# +# Copyright (c) 2005-2007 Analog Device Inc. +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +COBJS-y := $(BOARD).o + +SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS-y)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(call cmd_link_o_target, $(OBJS) $(SOBJS)) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/dnp5370/dnp5370.c b/board/dnp5370/dnp5370.c new file mode 100644 index 0000000..da9eb5f --- /dev/null +++ b/board/dnp5370/dnp5370.c @@ -0,0 +1,104 @@ +/* + * U-boot - main board file + * + * (C) Copyright 2010 3ality Digital Systems + * + * Copyright (c) 2005-2008 Analog Devices Inc. + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <common.h> +#include <config.h> +#include <asm/blackfin.h> +#include <asm/net.h> +#include <net.h> +#include <netdev.h> +#include <asm/gpio.h> + +static void disable_external_watchdog(void) +{ +#ifdef CONFIG_DNP5370_EXT_WD_DISABLE + /* disable external HW watchdog with PH13 = WD1 = 1 */ + gpio_request(GPIO_PH13, "ext_wd"); + gpio_direction_output(GPIO_PH13, 1); +#endif +} + +int checkboard(void) +{ + printf("Board: SSV DilNet DNP5370\n"); + return 0; +} + +#ifdef CONFIG_BFIN_MAC +static void board_init_enetaddr(uchar *mac_addr) +{ +#ifdef CONFIG_SYS_NO_FLASH +# define USE_MAC_IN_FLASH 0 +#else +# define USE_MAC_IN_FLASH 1 +#endif + bool valid_mac = false; + + if (USE_MAC_IN_FLASH) { + /* we cram the MAC in the last flash sector */ + uchar *board_mac_addr = (uchar *)0x202F0000; + if (is_valid_ether_addr(board_mac_addr)) { + memcpy(mac_addr, board_mac_addr, 6); + valid_mac = true; + } + } + + if (!valid_mac) { + puts("Warning: Generating 'random' MAC address\n"); + bfin_gen_rand_mac(mac_addr); + } + + eth_setenv_enetaddr("ethaddr", mac_addr); +} + +int board_eth_init(bd_t *bis) +{ + return bfin_EMAC_initialize(bis); +} +#endif + +/* miscellaneous platform dependent initialisations */ +int misc_init_r(void) +{ + disable_external_watchdog(); + +#ifdef CONFIG_BFIN_MAC + uchar enetaddr[6]; + if (!eth_getenv_enetaddr("ethaddr", enetaddr)) + board_init_enetaddr(enetaddr); +#endif + +#ifndef CONFIG_SYS_NO_FLASH + /* we use the last sector for the MAC address / POST LDR */ + extern flash_info_t flash_info[]; + flash_protect(FLAG_PROTECT_SET, 0x202F0000, 0x202FFFFF, &flash_info[0]); +#endif + + return 0; +} diff --git a/board/eNET/eNET.c b/board/eNET/eNET.c index dd0ce54..2a5636c 100644 --- a/board/eNET/eNET.c +++ b/board/eNET/eNET.c @@ -35,6 +35,8 @@ DECLARE_GLOBAL_DATA_PTR; +unsigned long monitor_flash_len = CONFIG_SYS_MONITOR_LEN; + static void enet_timer_isr(void); static void enet_toggle_run_led(void); static void enet_setup_pars(void); diff --git a/board/eNET/eNET_pci.c b/board/eNET/eNET_pci.c index fefb1a4..a03090e 100644 --- a/board/eNET/eNET_pci.c +++ b/board/eNET/eNET_pci.c @@ -1,9 +1,9 @@ /* - * (C) Copyright 2008 - * Graeme Russ, graeme.russ@gmail.com. + * (C) Copyright 2008,2009 + * Graeme Russ, <graeme.russ@gmail.com> * * (C) Copyright 2002 - * Daniel Engström, Omicron Ceti AB <daniel@omicron.se>. + * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se> * * See file CREDITS for list of people who contributed to this * project. @@ -23,6 +23,7 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ + #include <common.h> #include <pci.h> #include <asm/pci.h> diff --git a/board/earthlcd/favr-32-ezkit/config.mk b/board/earthlcd/favr-32-ezkit/config.mk index f8bc88d..284f7ff 100644 --- a/board/earthlcd/favr-32-ezkit/config.mk +++ b/board/earthlcd/favr-32-ezkit/config.mk @@ -1,4 +1,3 @@ PLATFORM_RELFLAGS += -ffunction-sections -fdata-sections PLATFORM_LDFLAGS += --gc-sections CONFIG_SYS_TEXT_BASE = 0x00000000 -LDSCRIPT = $(src)board/earthlcd/favr-32-ezkit/u-boot.lds diff --git a/board/eltec/mhpc/u-boot.lds b/board/eltec/mhpc/u-boot.lds index 2fac727..fd4e8a5 100644 --- a/board/eltec/mhpc/u-boot.lds +++ b/board/eltec/mhpc/u-boot.lds @@ -47,13 +47,14 @@ SECTIONS PROVIDE (erotext = .); .reloc : { - KEEP(*(.got)) _GOT2_TABLE_ = .; KEEP(*(.got2)) + KEEP(*(.got)) + PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); _FIXUP_TABLE_ = .; KEEP(*(.fixup)) } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; __fixup_entries = (. - _FIXUP_TABLE_)>>2; .data : diff --git a/board/emk/top860/u-boot.lds b/board/emk/top860/u-boot.lds index 32dcbd3..fb06648 100644 --- a/board/emk/top860/u-boot.lds +++ b/board/emk/top860/u-boot.lds @@ -47,13 +47,14 @@ SECTIONS PROVIDE (erotext = .); .reloc : { - KEEP(*(.got)) _GOT2_TABLE_ = .; KEEP(*(.got2)) + KEEP(*(.got)) + PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); _FIXUP_TABLE_ = .; KEEP(*(.fixup)) } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; __fixup_entries = (. - _FIXUP_TABLE_)>>2; .data : diff --git a/board/ep88x/u-boot.lds b/board/ep88x/u-boot.lds index e2dd1c2..332b35a 100644 --- a/board/ep88x/u-boot.lds +++ b/board/ep88x/u-boot.lds @@ -43,9 +43,10 @@ SECTIONS PROVIDE (erotext = .); .reloc : { - KEEP(*(.got)) _GOT2_TABLE_ = .; KEEP(*(.got2)) + KEEP(*(.got)) + PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); _FIXUP_TABLE_ = .; KEEP(*(.fixup)) } diff --git a/board/esd/dasa_sim/u-boot.lds b/board/esd/dasa_sim/u-boot.lds index 2bf60f5..b15948d 100644 --- a/board/esd/dasa_sim/u-boot.lds +++ b/board/esd/dasa_sim/u-boot.lds @@ -54,13 +54,14 @@ SECTIONS PROVIDE (erotext = .); .reloc : { - KEEP(*(.got)) _GOT2_TABLE_ = .; KEEP(*(.got2)) + KEEP(*(.got)) + PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); _FIXUP_TABLE_ = .; KEEP(*(.fixup)) } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; __fixup_entries = (. - _FIXUP_TABLE_)>>2; .data : diff --git a/board/esteem192e/u-boot.lds b/board/esteem192e/u-boot.lds index 8455f0b..163b83d 100644 --- a/board/esteem192e/u-boot.lds +++ b/board/esteem192e/u-boot.lds @@ -56,13 +56,14 @@ SECTIONS PROVIDE (erotext = .); .reloc : { - KEEP(*(.got)) _GOT2_TABLE_ = .; KEEP(*(.got2)) + KEEP(*(.got)) + PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); _FIXUP_TABLE_ = .; KEEP(*(.fixup)) } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; __fixup_entries = (. - _FIXUP_TABLE_)>>2; .data : diff --git a/board/etx094/u-boot.lds b/board/etx094/u-boot.lds index 04233d8..b68d9ea 100644 --- a/board/etx094/u-boot.lds +++ b/board/etx094/u-boot.lds @@ -56,13 +56,14 @@ SECTIONS PROVIDE (erotext = .); .reloc : { - KEEP(*(.got)) _GOT2_TABLE_ = .; KEEP(*(.got2)) + KEEP(*(.got)) + PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); _FIXUP_TABLE_ = .; KEEP(*(.fixup)) } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; __fixup_entries = (. - _FIXUP_TABLE_)>>2; .data : diff --git a/board/eukrea/cpu9260/config.mk b/board/eukrea/cpu9260/config.mk deleted file mode 100644 index 2077692..0000000 --- a/board/eukrea/cpu9260/config.mk +++ /dev/null @@ -1 +0,0 @@ -CONFIG_SYS_TEXT_BASE = 0x21f00000 diff --git a/board/eukrea/cpu9260/cpu9260.c b/board/eukrea/cpu9260/cpu9260.c index 61b6c33..9ec48a0 100644 --- a/board/eukrea/cpu9260/cpu9260.c +++ b/board/eukrea/cpu9260/cpu9260.c @@ -29,12 +29,13 @@ #include <common.h> #include <asm/sizes.h> #include <asm/arch/at91sam9260.h> -#include <asm/arch/at91sam9_matrix.h> #include <asm/arch/at91sam9_smc.h> #include <asm/arch/at91_common.h> #include <asm/arch/at91_pmc.h> #include <asm/arch/at91_rstc.h> -#include <asm/arch/gpio.h> +#include <asm/arch/at91_matrix.h> +#include <asm/arch/at91_pio.h> +#include <asm/arch/clk.h> #include <asm/arch/io.h> #include <asm/arch/hardware.h> #if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB) @@ -53,116 +54,103 @@ DECLARE_GLOBAL_DATA_PTR; static void cpu9260_nand_hw_init(void) { unsigned long csa; + at91_smc_t *smc = (at91_smc_t *) AT91_SMC_BASE; + at91_matrix_t *matrix = (at91_matrix_t *) AT91_MATRIX_BASE; + at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; /* Enable CS3 */ - csa = at91_sys_read(AT91_MATRIX_EBICSA); - at91_sys_write(AT91_MATRIX_EBICSA, - csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA); + csa = readl(&matrix->csa) | AT91_MATRIX_CSA_EBI_CS3A; + writel(csa, &matrix->csa); /* Configure SMC CS3 for NAND/SmartMedia */ #if defined(CONFIG_CPU9G20) - at91_sys_write(AT91_SMC_SETUP(3), - AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(0) | - AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(0)); - at91_sys_write(AT91_SMC_PULSE(3), - AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(4) | - AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(4)); - at91_sys_write(AT91_SMC_CYCLE(3), - AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7)); - at91_sys_write(AT91_SMC_MODE(3), - AT91_SMC_READMODE | AT91_SMC_WRITEMODE | - AT91_SMC_EXNWMODE_DISABLE | - AT91_SMC_DBW_8 | - AT91_SMC_TDF_(3)); + writel(AT91_SMC_SETUP_NWE(2) | AT91_SMC_SETUP_NCS_WR(0) | + AT91_SMC_SETUP_NRD(2) | AT91_SMC_SETUP_NCS_RD(0), + &smc->cs[3].setup); + writel(AT91_SMC_PULSE_NWE(4) | AT91_SMC_PULSE_NCS_WR(4) | + AT91_SMC_PULSE_NRD(4) | AT91_SMC_PULSE_NCS_RD(4), + &smc->cs[3].pulse); + writel(AT91_SMC_CYCLE_NWE(7) | AT91_SMC_CYCLE_NRD(7), + &smc->cs[3].cycle); + writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | + AT91_SMC_MODE_EXNW_DISABLE | + AT91_SMC_MODE_DBW_8 | + AT91_SMC_MODE_TDF_CYCLE(3), + &smc->cs[3].mode); #elif defined(CONFIG_CPU9260) - at91_sys_write(AT91_SMC_SETUP(3), - AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) | - AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0)); - at91_sys_write(AT91_SMC_PULSE(3), - AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) | - AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3)); - at91_sys_write(AT91_SMC_CYCLE(3), - AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5)); - at91_sys_write(AT91_SMC_MODE(3), - AT91_SMC_READMODE | AT91_SMC_WRITEMODE | - AT91_SMC_EXNWMODE_DISABLE | - AT91_SMC_DBW_8 | - AT91_SMC_TDF_(2)); + writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) | + AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0), + &smc->cs[3].setup); + writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(3) | + AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(3), + &smc->cs[3].pulse); + writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(5), + &smc->cs[3].cycle); + writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | + AT91_SMC_MODE_EXNW_DISABLE | + AT91_SMC_MODE_DBW_8 | + AT91_SMC_MODE_TDF_CYCLE(2), + &smc->cs[3].mode); #endif - at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_PIOC); + writel(1 << AT91SAM9260_ID_PIOC, &pmc->pcer); /* Configure RDY/BSY */ - at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1); + at91_set_pio_input(CONFIG_SYS_NAND_READY_PIN, 1); /* Enable NandFlash */ - at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); + at91_set_pio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); } #endif #ifdef CONFIG_MACB static void cpu9260_macb_hw_init(void) { - unsigned long rstc; + unsigned long rstcmr; + at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + at91_rstc_t *rstc = (at91_rstc_t *) AT91_RSTC_BASE; /* Enable clock */ - at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_EMAC); - - /* - * Disable pull-up on: - * RXDV (PA17) => PHY normal mode (not Test mode) - * ERX0 (PA14) => PHY ADDR0 - * ERX1 (PA15) => PHY ADDR1 - * ERX2 (PA25) => PHY ADDR2 - * ERX3 (PA26) => PHY ADDR3 - * ECRS (PA28) => PHY ADDR4 => PHYADDR = 0x0 - * - * PHY has internal pull-down - */ - writel(pin_to_mask(AT91_PIN_PA14) | - pin_to_mask(AT91_PIN_PA15) | - pin_to_mask(AT91_PIN_PA17) | - pin_to_mask(AT91_PIN_PA25) | - pin_to_mask(AT91_PIN_PA26) | - pin_to_mask(AT91_PIN_PA28), - pin_to_controller(AT91_PIN_PA0) + PIO_PUDR); - - rstc = at91_sys_read(AT91_RSTC_MR) & AT91_RSTC_ERSTL; + writel(1 << AT91SAM9260_ID_EMAC, &pmc->pcer); + + at91_set_pio_pullup(AT91_PIO_PORTA, 17, 1); + + rstcmr = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK; /* Need to reset PHY -> 500ms reset */ - at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY | - (AT91_RSTC_ERSTL & (0x0D << 8)) | - AT91_RSTC_URSTEN); + writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(0xD) | + AT91_RSTC_MR_URSTEN, &rstc->mr); - at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST); + writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr); /* Wait for end hardware reset */ - while (!(at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_NRSTL)) + while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL)) ; /* Restore NRST value */ - at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY | - (rstc) | - AT91_RSTC_URSTEN); - - /* Re-enable pull-up */ - writel(pin_to_mask(AT91_PIN_PA14) | - pin_to_mask(AT91_PIN_PA15) | - pin_to_mask(AT91_PIN_PA17) | - pin_to_mask(AT91_PIN_PA25) | - pin_to_mask(AT91_PIN_PA26) | - pin_to_mask(AT91_PIN_PA28), - pin_to_controller(AT91_PIN_PA0) + PIO_PUER); + writel(AT91_RSTC_KEY | rstcmr | AT91_RSTC_MR_URSTEN, &rstc->mr); at91_macb_hw_init(); } #endif -int board_init(void) +int board_early_init_f(void) { - /* Enable Ctrlc */ - console_init_f(); + at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + + writel((1 << AT91SAM9260_ID_PIOA) | + (1 << AT91SAM9260_ID_PIOC) | + (1 << AT91SAM9260_ID_PIOB), + &pmc->pcer); + + at91_serial_hw_init(); + + return 0; +} + +int board_init(void) +{ /* arch number of the board */ #if defined(CONFIG_CPU9G20) gd->bd->bi_arch_number = MACH_TYPE_CPUAT9G20; @@ -171,9 +159,8 @@ int board_init(void) #endif /* adress of boot parameters */ - gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; + gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; - at91_serial_hw_init(); #ifdef CONFIG_CMD_NAND cpu9260_nand_hw_init(); #endif @@ -188,26 +175,16 @@ int board_init(void) int dram_init(void) { - gd->bd->bi_dram[0].start = PHYS_SDRAM; - if (get_ram_size((long *) PHYS_SDRAM, PHYS_SDRAM_SIZE) != - PHYS_SDRAM_SIZE) - return -1; - - gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; + gd->ram_size = get_ram_size((volatile long *)CONFIG_SYS_SDRAM_BASE, + CONFIG_SYS_SDRAM_SIZE); return 0; } -#ifdef CONFIG_RESET_PHY_R -void reset_phy(void) -{ -} -#endif - int board_eth_init(bd_t *bis) { int rc = 0; #ifdef CONFIG_MACB - rc = macb_eth_initialize(0, (void *)AT91SAM9260_BASE_EMAC, 0x00); + rc = macb_eth_initialize(0, (void *)AT91_EMAC_BASE, 0); #endif return rc; } diff --git a/board/eukrea/cpu9260/led.c b/board/eukrea/cpu9260/led.c index e73543b..d0906bc 100644 --- a/board/eukrea/cpu9260/led.c +++ b/board/eukrea/cpu9260/led.c @@ -35,65 +35,67 @@ static unsigned int saved_state[4] = {STATUS_LED_OFF, STATUS_LED_OFF, void coloured_LED_init(void) { + at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + /* Enable clock */ - at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_PIOC); + writel(1 << AT91SAM9260_ID_PIOC, &pmc->pcer); - at91_set_gpio_output(CONFIG_RED_LED, 1); - at91_set_gpio_output(CONFIG_GREEN_LED, 1); - at91_set_gpio_output(CONFIG_YELLOW_LED, 1); - at91_set_gpio_output(CONFIG_BLUE_LED, 1); + at91_set_pio_output(CONFIG_RED_LED, 1); + at91_set_pio_output(CONFIG_GREEN_LED, 1); + at91_set_pio_output(CONFIG_YELLOW_LED, 1); + at91_set_pio_output(CONFIG_BLUE_LED, 1); - at91_set_gpio_value(CONFIG_RED_LED, 1); - at91_set_gpio_value(CONFIG_GREEN_LED, 1); - at91_set_gpio_value(CONFIG_YELLOW_LED, 1); - at91_set_gpio_value(CONFIG_BLUE_LED, 1); + at91_set_pio_value(CONFIG_RED_LED, 1); + at91_set_pio_value(CONFIG_GREEN_LED, 1); + at91_set_pio_value(CONFIG_YELLOW_LED, 1); + at91_set_pio_value(CONFIG_BLUE_LED, 1); } void red_LED_off(void) { - at91_set_gpio_value(CONFIG_RED_LED, 1); + at91_set_pio_value(CONFIG_RED_LED, 1); saved_state[STATUS_LED_RED] = STATUS_LED_OFF; } void green_LED_off(void) { - at91_set_gpio_value(CONFIG_GREEN_LED, 1); + at91_set_pio_value(CONFIG_GREEN_LED, 1); saved_state[STATUS_LED_GREEN] = STATUS_LED_OFF; } void yellow_LED_off(void) { - at91_set_gpio_value(CONFIG_YELLOW_LED, 1); + at91_set_pio_value(CONFIG_YELLOW_LED, 1); saved_state[STATUS_LED_YELLOW] = STATUS_LED_OFF; } void blue_LED_off(void) { - at91_set_gpio_value(CONFIG_BLUE_LED, 1); + at91_set_pio_value(CONFIG_BLUE_LED, 1); saved_state[STATUS_LED_BLUE] = STATUS_LED_OFF; } void red_LED_on(void) { - at91_set_gpio_value(CONFIG_RED_LED, 0); + at91_set_pio_value(CONFIG_RED_LED, 0); saved_state[STATUS_LED_RED] = STATUS_LED_ON; } void green_LED_on(void) { - at91_set_gpio_value(CONFIG_GREEN_LED, 0); + at91_set_pio_value(CONFIG_GREEN_LED, 0); saved_state[STATUS_LED_GREEN] = STATUS_LED_ON; } void yellow_LED_on(void) { - at91_set_gpio_value(CONFIG_YELLOW_LED, 0); + at91_set_pio_value(CONFIG_YELLOW_LED, 0); saved_state[STATUS_LED_YELLOW] = STATUS_LED_ON; } void blue_LED_on(void) { - at91_set_gpio_value(CONFIG_BLUE_LED, 0); + at91_set_pio_value(CONFIG_BLUE_LED, 0); saved_state[STATUS_LED_BLUE] = STATUS_LED_ON; } diff --git a/board/eukrea/cpuat91/Makefile b/board/eukrea/cpuat91/Makefile index 15da3d8..1d62b13 100644 --- a/board/eukrea/cpuat91/Makefile +++ b/board/eukrea/cpuat91/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).o -COBJS := cpuat91.o +COBJS := $(BOARD).o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) @@ -38,7 +38,7 @@ clean: rm -f $(SOBJS) $(OBJS) distclean: clean - rm -f $(LIB) core *.bak .depend + rm -f $(LIB) core *.bak $(obj).depend ######################################################################### diff --git a/board/eukrea/cpuat91/config.mk b/board/eukrea/cpuat91/config.mk deleted file mode 100644 index 463f46b..0000000 --- a/board/eukrea/cpuat91/config.mk +++ /dev/null @@ -1 +0,0 @@ -CONFIG_SYS_TEXT_BASE = 0x21F00000 diff --git a/board/eukrea/cpuat91/cpuat91.c b/board/eukrea/cpuat91/cpuat91.c index cd4d42c..4c4dad6 100644 --- a/board/eukrea/cpuat91/cpuat91.c +++ b/board/eukrea/cpuat91/cpuat91.c @@ -47,24 +47,23 @@ int board_init(void) /* arch number of CPUAT91-Board */ gd->bd->bi_arch_number = MACH_TYPE_CPUAT91; /* adress of boot parameters */ - gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; + gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; return 0; } int dram_init(void) { - gd->bd->bi_dram[0].start = PHYS_SDRAM; - gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; + /* dram_init must store complete ramsize in gd->ram_size */ + gd->ram_size = get_ram_size((volatile long *)CONFIG_SYS_SDRAM_BASE, + CONFIG_SYS_SDRAM_SIZE); return 0; } #ifdef CONFIG_DRIVER_AT91EMAC int board_eth_init(bd_t *bis) { - int rc = 0; - rc = at91emac_register(bis, 0); - return rc; + return at91emac_register(bis, (u32) AT91_EMAC_BASE); } #endif diff --git a/board/evb64260/u-boot.lds b/board/evb64260/u-boot.lds index 0648f62..2d031ef 100644 --- a/board/evb64260/u-boot.lds +++ b/board/evb64260/u-boot.lds @@ -51,13 +51,14 @@ SECTIONS PROVIDE (erotext = .); .reloc : { - KEEP(*(.got)) _GOT2_TABLE_ = .; KEEP(*(.got2)) + KEEP(*(.got)) + PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); _FIXUP_TABLE_ = .; KEEP(*(.fixup)) } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; __fixup_entries = (. - _FIXUP_TABLE_)>>2; .data : diff --git a/board/fads/u-boot.lds b/board/fads/u-boot.lds index 63d0ea1..9ea0674 100644 --- a/board/fads/u-boot.lds +++ b/board/fads/u-boot.lds @@ -49,13 +49,14 @@ SECTIONS PROVIDE (erotext = .); .reloc : { - KEEP(*(.got)) _GOT2_TABLE_ = .; KEEP(*(.got2)) + KEEP(*(.got)) + PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); _FIXUP_TABLE_ = .; KEEP(*(.fixup)) } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; __fixup_entries = (. - _FIXUP_TABLE_)>>2; .data : diff --git a/board/faraday/a320evb/a320evb.c b/board/faraday/a320evb/a320evb.c index b9343e4..2578be4 100644 --- a/board/faraday/a320evb/a320evb.c +++ b/board/faraday/a320evb/a320evb.c @@ -21,7 +21,7 @@ #include <netdev.h> #include <asm/io.h> -#include <asm/arch/ftsmc020.h> +#include <faraday/ftsmc020.h> DECLARE_GLOBAL_DATA_PTR; diff --git a/board/faraday/a320evb/lowlevel_init.S b/board/faraday/a320evb/lowlevel_init.S index 97718c0..4262c11 100644 --- a/board/faraday/a320evb/lowlevel_init.S +++ b/board/faraday/a320evb/lowlevel_init.S @@ -21,7 +21,7 @@ #include <version.h> #include <asm/macro.h> -#include <asm/arch/ftsdmc020.h> +#include <faraday/ftsdmc020.h> /* * parameters for the SDRAM controller diff --git a/board/flagadm/u-boot.lds b/board/flagadm/u-boot.lds index 2fac727..fd4e8a5 100644 --- a/board/flagadm/u-boot.lds +++ b/board/flagadm/u-boot.lds @@ -47,13 +47,14 @@ SECTIONS PROVIDE (erotext = .); .reloc : { - KEEP(*(.got)) _GOT2_TABLE_ = .; KEEP(*(.got2)) + KEEP(*(.got)) + PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); _FIXUP_TABLE_ = .; KEEP(*(.fixup)) } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; __fixup_entries = (. - _FIXUP_TABLE_)>>2; .data : diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile index 1abd3e5..dbf1da8 100644 --- a/board/freescale/common/Makefile +++ b/board/freescale/common/Makefile @@ -36,6 +36,7 @@ COBJS-$(CONFIG_FSL_NGPIXIS) += ngpixis.o COBJS-$(CONFIG_PQ_MDS_PIB) += pq-mds-pib.o COBJS-$(CONFIG_ID_EEPROM) += sys_eeprom.o COBJS-$(CONFIG_FSL_SGMII_RISER) += sgmii_riser.o +COBJS-$(CONFIG_ENV_IS_IN_MMC) += sdhc_boot.o COBJS-$(CONFIG_MPC8541CDS) += cds_pci_ft.o COBJS-$(CONFIG_MPC8548CDS) += cds_pci_ft.o @@ -45,7 +46,9 @@ COBJS-$(CONFIG_MPC8536DS) += ics307_clk.o COBJS-$(CONFIG_MPC8572DS) += ics307_clk.o COBJS-$(CONFIG_P1022DS) += ics307_clk.o COBJS-$(CONFIG_P2020DS) += ics307_clk.o +COBJS-$(CONFIG_P3041DS) += ics307_clk.o COBJS-$(CONFIG_P4080DS) += ics307_clk.o +COBJS-$(CONFIG_P5020DS) += ics307_clk.o SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(COBJS-y)) diff --git a/board/freescale/common/ngpixis.c b/board/freescale/common/ngpixis.c index a135fbe..765f035 100644 --- a/board/freescale/common/ngpixis.c +++ b/board/freescale/common/ngpixis.c @@ -1,5 +1,5 @@ /** - * Copyright 2010 Freescale Semiconductor + * Copyright 2010-2011 Freescale Semiconductor * Author: Timur Tabi <timur@freescale.com> * * This program is free software; you can redistribute it and/or modify it @@ -35,67 +35,134 @@ #include <common.h> #include <command.h> -#include <watchdog.h> -#include <asm/cache.h> #include <asm/io.h> #include "ngpixis.h" +static u8 __pixis_read(unsigned int reg) +{ + void *p = (void *)PIXIS_BASE; + + return in_8(p + reg); +} +u8 pixis_read(unsigned int reg) __attribute__((weak, alias("__pixis_read"))); + +static void __pixis_write(unsigned int reg, u8 value) +{ + void *p = (void *)PIXIS_BASE; + + out_8(p + reg, value); +} +void pixis_write(unsigned int reg, u8 value) + __attribute__((weak, alias("__pixis_write"))); + /* * Reset the board. This ignores the ENx registers. */ -void pixis_reset(void) +void __pixis_reset(void) { - out_8(&pixis->rst, 0); + PIXIS_WRITE(rst, 0); while (1); } +void pixis_reset(void) __attribute__((weak, alias("__pixis_reset"))); /* * Reset the board. Like pixis_reset(), but it honors the ENx registers. */ -void pixis_bank_reset(void) +void __pixis_bank_reset(void) { - out_8(&pixis->vctl, 0); - out_8(&pixis->vctl, 1); + PIXIS_WRITE(vctl, 0); + PIXIS_WRITE(vctl, 1); while (1); } +void pixis_bank_reset(void) __attribute__((weak, alias("__pixis_bank_reset"))); /** * Set the boot bank to the power-on default bank */ -void clear_altbank(void) +void __clear_altbank(void) { + u8 reg; + /* Tell the ngPIXIS to use this the bits in the physical switch for the * boot bank value, instead of the SWx register. We need to be careful * only to set the bits in SWx that correspond to the boot bank. */ - clrbits_8(&PIXIS_EN(PIXIS_LBMAP_SWITCH), PIXIS_LBMAP_MASK); + reg = PIXIS_READ(s[PIXIS_LBMAP_SWITCH - 1].en); + reg &= ~PIXIS_LBMAP_MASK; + PIXIS_WRITE(s[PIXIS_LBMAP_SWITCH - 1].en, reg); } +void clear_altbank(void) __attribute__((weak, alias("__clear_altbank"))); /** * Set the boot bank to the alternate bank */ -void set_altbank(void) +void __set_altbank(void) { + u8 reg; + /* Program the alternate bank number into the SWx register. */ - clrsetbits_8(&PIXIS_SW(PIXIS_LBMAP_SWITCH), PIXIS_LBMAP_MASK, - PIXIS_LBMAP_ALTBANK); + reg = PIXIS_READ(s[PIXIS_LBMAP_SWITCH - 1].sw); + reg = (reg & ~PIXIS_LBMAP_MASK) | PIXIS_LBMAP_ALTBANK; + PIXIS_WRITE(s[PIXIS_LBMAP_SWITCH - 1].sw, reg); /* Tell the ngPIXIS to use this the bits in the SWx register for the * boot bank value, instead of the physical switch. We need to be * careful only to set the bits in SWx that correspond to the boot bank. */ - setbits_8(&PIXIS_EN(PIXIS_LBMAP_SWITCH), PIXIS_LBMAP_MASK); + reg = PIXIS_READ(s[PIXIS_LBMAP_SWITCH - 1].en); + reg |= PIXIS_LBMAP_MASK; + PIXIS_WRITE(s[PIXIS_LBMAP_SWITCH - 1].en, reg); } +void set_altbank(void) __attribute__((weak, alias("__set_altbank"))); +#ifdef DEBUG +static void pixis_dump_regs(void) +{ + unsigned int i; + + printf("id=%02x\n", PIXIS_READ(id)); + printf("arch=%02x\n", PIXIS_READ(arch)); + printf("scver=%02x\n", PIXIS_READ(scver)); + printf("csr=%02x\n", PIXIS_READ(csr)); + printf("rst=%02x\n", PIXIS_READ(rst)); + printf("aux=%02x\n", PIXIS_READ(aux)); + printf("spd=%02x\n", PIXIS_READ(spd)); + printf("brdcfg0=%02x\n", PIXIS_READ(brdcfg0)); + printf("brdcfg1=%02x\n", PIXIS_READ(brdcfg1)); + printf("addr=%02x\n", PIXIS_READ(addr)); + printf("data=%02x\n", PIXIS_READ(data)); + printf("led=%02x\n", PIXIS_READ(led)); + printf("vctl=%02x\n", PIXIS_READ(vctl)); + printf("vstat=%02x\n", PIXIS_READ(vstat)); + printf("vcfgen0=%02x\n", PIXIS_READ(vcfgen0)); + printf("ocmcsr=%02x\n", PIXIS_READ(ocmcsr)); + printf("ocmmsg=%02x\n", PIXIS_READ(ocmmsg)); + printf("gmdbg=%02x\n", PIXIS_READ(gmdbg)); + printf("sclk=%02x%02x%02x\n", + PIXIS_READ(sclk[0]), PIXIS_READ(sclk[1]), PIXIS_READ(sclk[2])); + printf("dclk=%02x%02x%02x\n", + PIXIS_READ(dclk[0]), PIXIS_READ(dclk[1]), PIXIS_READ(dclk[2])); + printf("watch=%02x\n", PIXIS_READ(watch)); + + for (i = 0; i < 8; i++) { + printf("SW%u=%02x/%02x ", i + 1, + PIXIS_READ(s[i].sw), PIXIS_READ(s[i].en)); + } + putc('\n'); +} +#endif int pixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { unsigned int i; char *p_altbank = NULL; +#ifdef DEBUG + char *p_dump = NULL; +#endif char *unknown_param = NULL; /* No args is a simple reset request. @@ -109,6 +176,13 @@ int pixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) continue; } +#ifdef DEBUG + if (strcmp(argv[i], "dump") == 0) { + p_dump = argv[i]; + continue; + } +#endif + unknown_param = argv[i]; } @@ -117,6 +191,15 @@ int pixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return 1; } +#ifdef DEBUG + if (p_dump) { + pixis_dump_regs(); + + /* 'dump' ignores other commands */ + return 0; + } +#endif + if (p_altbank) set_altbank(); else @@ -133,4 +216,7 @@ U_BOOT_CMD( "Reset the board using the FPGA sequencer", "- hard reset to default bank\n" "pixis_reset altbank - reset to alternate bank\n" +#ifdef DEBUG + "pixis_reset dump - display the PIXIS registers\n" +#endif ); diff --git a/board/freescale/common/ngpixis.h b/board/freescale/common/ngpixis.h index 089408b..1d4483d 100644 --- a/board/freescale/common/ngpixis.h +++ b/board/freescale/common/ngpixis.h @@ -1,5 +1,5 @@ /** - * Copyright 2010 Freescale Semiconductor + * Copyright 2010-2011 Freescale Semiconductor * Author: Timur Tabi <timur@freescale.com> * * This program is free software; you can redistribute it and/or modify it @@ -20,16 +20,17 @@ typedef struct ngpixis { u8 scver; u8 csr; u8 rst; - u8 res1; + u8 serclk; u8 aux; u8 spd; u8 brdcfg0; u8 brdcfg1; /* On some boards, this register is called 'dma' */ u8 addr; - u8 res2[2]; + u8 brdcfg2; + u8 gpiodir; u8 data; u8 led; - u8 res3; + u8 tag; u8 vctl; u8 vstat; u8 vcfgen0; @@ -55,3 +56,9 @@ typedef struct ngpixis { /* The PIXIS EN register that corresponds to board switch X, where x >= 1 */ #define PIXIS_EN(x) (pixis->s[(x) - 1].en) + +u8 pixis_read(unsigned int reg); +void pixis_write(unsigned int reg, u8 value); + +#define PIXIS_READ(reg) pixis_read(offsetof(ngpixis_t, reg)) +#define PIXIS_WRITE(reg, value) pixis_write(offsetof(ngpixis_t, reg), value) diff --git a/board/freescale/common/sdhc_boot.c b/board/freescale/common/sdhc_boot.c new file mode 100644 index 0000000..964c6b8 --- /dev/null +++ b/board/freescale/common/sdhc_boot.c @@ -0,0 +1,64 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <mmc.h> +#include <malloc.h> + +/* + * The environment variables are written to just after the u-boot image + * on SDCard, so we must read the MBR to get the start address and code + * length of the u-boot image, then calculate the address of the env. + */ +#define ESDHC_BOOT_IMAGE_SIZE 0x48 +#define ESDHC_BOOT_IMAGE_ADDR 0x50 + +int mmc_get_env_addr(struct mmc *mmc, u32 *env_addr) +{ + u8 *tmp_buf; + u32 blklen, code_offset, code_len, n; + + blklen = mmc->read_bl_len; + tmp_buf = malloc(blklen); + if (!tmp_buf) + return 1; + + /* read out the first block, get the config data information */ + n = mmc->block_dev.block_read(mmc->block_dev.dev, 0, 1, tmp_buf); + if (!n) { + free(tmp_buf); + return 1; + } + + /* Get the Source Address, from offset 0x50 */ + code_offset = *(u32 *)(tmp_buf + ESDHC_BOOT_IMAGE_ADDR); + + /* Get the code size from offset 0x48 */ + code_len = *(u32 *)(tmp_buf + ESDHC_BOOT_IMAGE_SIZE); + + *env_addr = code_offset + code_len; + + free(tmp_buf); + + return 0; +} + diff --git a/board/freescale/common/sys_eeprom.c b/board/freescale/common/sys_eeprom.c index 3ecfb06..d2ed036 100644 --- a/board/freescale/common/sys_eeprom.c +++ b/board/freescale/common/sys_eeprom.c @@ -1,5 +1,5 @@ /* - * Copyright 2006, 2008-2009 Freescale Semiconductor + * Copyright 2006, 2008-2009, 2011 Freescale Semiconductor * York Sun (yorksun@freescale.com) * Haiying Wang (haiying.wang@freescale.com) * Timur Tabi (timur@freescale.com) @@ -34,12 +34,6 @@ #endif #ifdef CONFIG_SYS_I2C_EEPROM_NXID -#define MAX_NUM_PORTS 8 -#define NXID_VERSION 0 -#endif - -#ifdef CONFIG_SYS_I2C_EEPROM_NXID_1 -#define CONFIG_SYS_I2C_EEPROM_NXID #define MAX_NUM_PORTS 23 #define NXID_VERSION 1 #endif @@ -428,11 +422,16 @@ int do_mac(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) * This ensures that any user-saved variables are never overwritten. * * This function must be called after relocation. + * + * For NXID v1 EEPROMs, we support loading and up-converting the older NXID v0 + * format. In a v0 EEPROM, there are only eight MAC addresses and the CRC is + * located at a different offset. */ int mac_read_from_eeprom(void) { unsigned int i; - u32 crc; + u32 crc, crc_offset = offsetof(struct eeprom, crc); + u32 *crcp; /* Pointer to the CRC in the data read from the EEPROM */ puts("EEPROM: "); @@ -447,12 +446,32 @@ int mac_read_from_eeprom(void) return -1; } - crc = crc32(0, (void *)&e, sizeof(e) - 4); - if (crc != be32_to_cpu(e.crc)) { +#ifdef CONFIG_SYS_I2C_EEPROM_NXID + /* + * If we've read an NXID v0 EEPROM, then we need to set the CRC offset + * to where it is in v0. + */ + if (e.version == 0) + crc_offset = 0x72; +#endif + + crc = crc32(0, (void *)&e, crc_offset); + crcp = (void *)&e + crc_offset; + if (crc != be32_to_cpu(*crcp)) { printf("CRC mismatch (%08x != %08x)\n", crc, be32_to_cpu(e.crc)); return -1; } +#ifdef CONFIG_SYS_I2C_EEPROM_NXID + /* + * MAC address #9 in v1 occupies the same position as the CRC in v0. + * Erase it so that it's not mistaken for a MAC address. We'll + * update the CRC later. + */ + if (e.version == 0) + memset(e.mac[8], 0xff, 6); +#endif + for (i = 0; i < min(e.mac_count, MAX_NUM_PORTS); i++) { if (memcmp(&e.mac[i], "\0\0\0\0\0\0", 6) && memcmp(&e.mac[i], "\xFF\xFF\xFF\xFF\xFF\xFF", 6)) { @@ -482,6 +501,17 @@ int mac_read_from_eeprom(void) printf("%c%c%c%c\n", e.id[0], e.id[1], e.id[2], e.id[3]); #endif +#ifdef CONFIG_SYS_I2C_EEPROM_NXID + /* + * Now we need to upconvert the data into v1 format. We do this last so + * that at boot time, U-Boot will still say "NXID v0". + */ + if (e.version == 0) { + e.version = NXID_VERSION; + update_crc(); + } +#endif + return 0; } diff --git a/board/freescale/corenet_ds/Makefile b/board/freescale/corenet_ds/Makefile index 1047d78..69e81a4 100644 --- a/board/freescale/corenet_ds/Makefile +++ b/board/freescale/corenet_ds/Makefile @@ -28,7 +28,9 @@ LIB = $(obj)lib$(BOARD).o COBJS-y += $(BOARD).o COBJS-y += ddr.o +COBJS-$(CONFIG_P3041DS) += p3041ds_ddr.o COBJS-$(CONFIG_P4080DS) += p4080ds_ddr.o +COBJS-$(CONFIG_P5020DS) += p5020ds_ddr.o COBJS-$(CONFIG_PCI) += pci.o COBJS-y += law.o COBJS-y += tlb.o diff --git a/board/freescale/corenet_ds/corenet_ds.c b/board/freescale/corenet_ds/corenet_ds.c index 232dc72..9324125 100644 --- a/board/freescale/corenet_ds/corenet_ds.c +++ b/board/freescale/corenet_ds/corenet_ds.c @@ -1,5 +1,5 @@ /* - * Copyright 2009-2010 Freescale Semiconductor, Inc. + * Copyright 2009-2011 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -39,8 +39,6 @@ extern void pci_of_setup(void *blob, bd_t *bd); DECLARE_GLOBAL_DATA_PTR; -void cpu_mp_lmb_reserve(struct lmb *lmb); - int checkboard (void) { u8 sw; @@ -89,10 +87,21 @@ int checkboard (void) * don't match. */ puts("SERDES Reference Clocks: "); +#if defined(CONFIG_P3041DS) || defined(CONFIG_P5020DS) + sw = in_8(&PIXIS_SW(5)); + for (i = 0; i < 3; i++) { + static const char *freq[] = {"100", "125", "156.25", "212.5" }; + unsigned int clock = (sw >> (6 - (2 * i))) & 3; + + printf("Bank%u=%sMhz ", i+1, freq[clock]); + } + puts("\n"); +#else sw = in_8(&PIXIS_SW(3)); printf("Bank1=%uMHz ", (sw & 0x40) ? 125 : 100); printf("Bank2=%sMHz ", (sw & 0x20) ? "156.25" : "125"); printf("Bank3=%sMHz\n", (sw & 0x10) ? "156.25" : "125"); +#endif return 0; } @@ -148,7 +157,7 @@ static const char *serdes_clock_to_string(u32 clock) case SRDS_PLLCR0_RFCK_SEL_156_25: return "156.25"; default: - return "???"; + return "150"; } } @@ -159,19 +168,41 @@ int misc_init_r(void) serdes_corenet_t *srds_regs = (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR; u32 actual[NUM_SRDS_BANKS]; unsigned int i; - u8 sw3; + u8 sw; +#if defined(CONFIG_P3041DS) || defined(CONFIG_P5020DS) + sw = in_8(&PIXIS_SW(5)); + for (i = 0; i < 3; i++) { + unsigned int clock = (sw >> (6 - (2 * i))) & 3; + switch (clock) { + case 0: + actual[i] = SRDS_PLLCR0_RFCK_SEL_100; + break; + case 1: + actual[i] = SRDS_PLLCR0_RFCK_SEL_125; + break; + case 2: + actual[i] = SRDS_PLLCR0_RFCK_SEL_156_25; + break; + default: + printf("Warning: SDREFCLK%u switch setting of '11' is " + "unsupported\n", i + 1); + break; + } + } +#else /* Warn if the expected SERDES reference clocks don't match the * actual reference clocks. This needs to be done after calling * p4080_erratum_serdes8(), since that function may modify the clocks. */ - sw3 = in_8(&PIXIS_SW(3)); - actual[0] = (sw3 & 0x40) ? + sw = in_8(&PIXIS_SW(3)); + actual[0] = (sw & 0x40) ? SRDS_PLLCR0_RFCK_SEL_125 : SRDS_PLLCR0_RFCK_SEL_100; - actual[1] = (sw3 & 0x20) ? + actual[1] = (sw & 0x20) ? SRDS_PLLCR0_RFCK_SEL_156_25 : SRDS_PLLCR0_RFCK_SEL_125; - actual[2] = (sw3 & 0x10) ? + actual[2] = (sw & 0x10) ? SRDS_PLLCR0_RFCK_SEL_156_25 : SRDS_PLLCR0_RFCK_SEL_125; +#endif for (i = 0; i < NUM_SRDS_BANKS; i++) { u32 expected = srds_regs->bank[i].pllcr0 & SRDS_PLLCR0_RFCK_SEL_MASK; @@ -186,13 +217,6 @@ int misc_init_r(void) return 0; } -#ifdef CONFIG_MP -void board_lmb_reserve(struct lmb *lmb) -{ - cpu_mp_lmb_reserve(lmb); -} -#endif - void ft_board_setup(void *blob, bd_t *bd) { phys_addr_t base; diff --git a/board/freescale/corenet_ds/ddr.c b/board/freescale/corenet_ds/ddr.c index 07b950f..98024c7 100644 --- a/board/freescale/corenet_ds/ddr.c +++ b/board/freescale/corenet_ds/ddr.c @@ -16,9 +16,6 @@ DECLARE_GLOBAL_DATA_PTR; -extern void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, - unsigned int ctrl_num); - /* * Fixed sdram init -- doesn't use serial presence detect. @@ -31,19 +28,21 @@ extern fixed_ddr_parm_t fixed_ddr_parm_1[]; phys_size_t fixed_sdram(void) { int i; - sys_info_t sysinfo; char buf[32]; fsl_ddr_cfg_regs_t ddr_cfg_regs; phys_size_t ddr_size; unsigned int lawbar1_target_id; + ulong ddr_freq, ddr_freq_mhz; + + ddr_freq = get_ddr_freq(0); + ddr_freq_mhz = ddr_freq / 1000000; - get_sys_info(&sysinfo); printf("Configuring DDR for %s MT/s data rate\n", - strmhz(buf, sysinfo.freqDDRBus)); + strmhz(buf, ddr_freq)); for (i = 0; fixed_ddr_parm_0[i].max_freq > 0; i++) { - if ((sysinfo.freqDDRBus > fixed_ddr_parm_0[i].min_freq) && - (sysinfo.freqDDRBus <= fixed_ddr_parm_0[i].max_freq)) { + if ((ddr_freq_mhz > fixed_ddr_parm_0[i].min_freq) && + (ddr_freq_mhz <= fixed_ddr_parm_0[i].max_freq)) { memcpy(&ddr_cfg_regs, fixed_ddr_parm_0[i].ddr_settings, sizeof(ddr_cfg_regs)); @@ -53,7 +52,7 @@ phys_size_t fixed_sdram(void) if (fixed_ddr_parm_0[i].max_freq == 0) panic("Unsupported DDR data rate %s MT/s data rate\n", - strmhz(buf, sysinfo.freqDDRBus)); + strmhz(buf, ddr_freq)); ddr_size = (phys_size_t) CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; ddr_cfg_regs.ddr_cdr1 = DDR_CDR1_DHC_EN; @@ -108,38 +107,6 @@ phys_size_t fixed_sdram(void) return ddr_size; } -static void get_spd(ddr3_spd_eeprom_t *spd, unsigned char i2c_address) -{ - int ret; - - ret = i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr3_spd_eeprom_t)); - if (ret) { - debug("DDR: failed to read SPD from address %u\n", i2c_address); - memset(spd, 0, sizeof(ddr3_spd_eeprom_t)); - } -} - -unsigned int fsl_ddr_get_mem_data_rate(void) -{ - return get_ddr_freq(0); -} - -void fsl_ddr_get_spd(ddr3_spd_eeprom_t *ctrl_dimms_spd, - unsigned int ctrl_num) -{ - unsigned int i; - unsigned int i2c_address = 0; - - for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) { - if (ctrl_num == 0 && i == 0) - i2c_address = SPD_EEPROM_ADDRESS1; - else if (ctrl_num == 1 && i == 0) - i2c_address = SPD_EEPROM_ADDRESS2; - - get_spd(&(ctrl_dimms_spd[i]), i2c_address); - } -} - typedef struct { u32 datarate_mhz_low; u32 datarate_mhz_high; diff --git a/board/freescale/corenet_ds/law.c b/board/freescale/corenet_ds/law.c index 43b4b97..d2ba556 100644 --- a/board/freescale/corenet_ds/law.c +++ b/board/freescale/corenet_ds/law.c @@ -1,5 +1,5 @@ /* - * Copyright 2008-2010 Freescale Semiconductor, Inc. + * Copyright 2008-2011 Freescale Semiconductor, Inc. * * (C) Copyright 2000 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -35,6 +35,9 @@ struct law_entry law_table[] = { #ifdef CONFIG_SYS_DCSRBAR_PHYS SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_4M, LAW_TRGT_IF_DCSR), #endif +#ifdef CONFIG_SYS_NAND_BASE_PHYS + SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC), +#endif }; int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/freescale/corenet_ds/p3041ds_ddr.c b/board/freescale/corenet_ds/p3041ds_ddr.c new file mode 100644 index 0000000..5a8ed94 --- /dev/null +++ b/board/freescale/corenet_ds/p3041ds_ddr.c @@ -0,0 +1,14 @@ +/* + * Copyright 2009-2010 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * Version 2 as published by the Free Software Foundation. + */ + +#include <common.h> +#include <asm/fsl_ddr_sdram.h> + +fixed_ddr_parm_t fixed_ddr_parm_0[] = { + {0, 0, NULL} +}; diff --git a/board/freescale/corenet_ds/p4080ds_ddr.c b/board/freescale/corenet_ds/p4080ds_ddr.c index 4ad89ff..844e1d7 100644 --- a/board/freescale/corenet_ds/p4080ds_ddr.c +++ b/board/freescale/corenet_ds/p4080ds_ddr.c @@ -1,5 +1,5 @@ /* - * Copyright 2009-2010 Freescale Semiconductor, Inc. + * Copyright 2009-2011 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -9,12 +9,6 @@ #include <common.h> #include <asm/fsl_ddr_sdram.h> -#define DATARATE_800MHZ 800000000 -#define DATARATE_900MHZ 900000000 -#define DATARATE_1000MHZ 1000000000 -#define DATARATE_1200MHZ 1200000000 -#define DATARATE_1300MHZ 1300000000 - #define CONFIG_SYS_DDR_TIMING_3_1200 0x01030000 #define CONFIG_SYS_DDR_TIMING_0_1200 0xCC550104 #define CONFIG_SYS_DDR_TIMING_1_1200 0x868FAA45 @@ -340,17 +334,17 @@ fsl_ddr_cfg_regs_t ddr_cfg_regs_1200_2nd = { }; fixed_ddr_parm_t fixed_ddr_parm_0[] = { - {DATARATE_800MHZ, DATARATE_900MHZ, &ddr_cfg_regs_800}, - {DATARATE_900MHZ, DATARATE_1000MHZ, &ddr_cfg_regs_900}, - {DATARATE_1000MHZ, DATARATE_1200MHZ, &ddr_cfg_regs_1000}, - {DATARATE_1200MHZ, DATARATE_1300MHZ, &ddr_cfg_regs_1200}, + {750, 850, &ddr_cfg_regs_800}, + {850, 950, &ddr_cfg_regs_900}, + {950, 1050, &ddr_cfg_regs_1000}, + {1050, 1250, &ddr_cfg_regs_1200}, {0, 0, NULL} }; fixed_ddr_parm_t fixed_ddr_parm_1[] = { - {DATARATE_800MHZ, DATARATE_900MHZ, &ddr_cfg_regs_800_2nd}, - {DATARATE_900MHZ, DATARATE_1000MHZ, &ddr_cfg_regs_900_2nd}, - {DATARATE_1000MHZ, DATARATE_1200MHZ, &ddr_cfg_regs_1000_2nd}, - {DATARATE_1200MHZ, DATARATE_1300MHZ, &ddr_cfg_regs_1200_2nd}, + {750, 850, &ddr_cfg_regs_800_2nd}, + {850, 950, &ddr_cfg_regs_900_2nd}, + {950, 1050, &ddr_cfg_regs_1000_2nd}, + {1050, 1250, &ddr_cfg_regs_1200_2nd}, {0, 0, NULL} }; diff --git a/board/freescale/corenet_ds/p5020ds_ddr.c b/board/freescale/corenet_ds/p5020ds_ddr.c new file mode 100644 index 0000000..e65de36 --- /dev/null +++ b/board/freescale/corenet_ds/p5020ds_ddr.c @@ -0,0 +1,18 @@ +/* + * Copyright 2009-2010 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * Version 2 as published by the Free Software Foundation. + */ + +#include <common.h> +#include <asm/fsl_ddr_sdram.h> + +fixed_ddr_parm_t fixed_ddr_parm_0[] = { + {0, 0, NULL} +}; + +fixed_ddr_parm_t fixed_ddr_parm_1[] = { + {0, 0, NULL} +}; diff --git a/board/freescale/corenet_ds/tlb.c b/board/freescale/corenet_ds/tlb.c index 1ae0416..38736b4 100644 --- a/board/freescale/corenet_ds/tlb.c +++ b/board/freescale/corenet_ds/tlb.c @@ -1,5 +1,5 @@ /* - * Copyright 2008-2010 Freescale Semiconductor, Inc. + * Copyright 2008-2011 Freescale Semiconductor, Inc. * * (C) Copyright 2000 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -51,9 +51,19 @@ struct fsl_e_tlb_entry tlb_table[] = { /* TLB 1 */ /* *I*** - Covers boot page */ +#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L3_ADDR) + /* + * *I*G - L3SRAM. When L3 is used as 1M SRAM, the address of the + * SRAM is at 0xfff00000, it covered the 0xfffff000. + */ + SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L3_ADDR, CONFIG_SYS_INIT_L3_ADDR, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 0, BOOKE_PAGESZ_1M, 1), +#else SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 0, BOOKE_PAGESZ_4K, 1), +#endif /* *I*G* - CCSRBAR */ SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, @@ -107,6 +117,16 @@ struct fsl_e_tlb_entry tlb_table[] = { MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 13, BOOKE_PAGESZ_4M, 1), #endif +#ifdef CONFIG_SYS_NAND_BASE + /* + * *I*G - NAND + * entry 14 and 15 has been used hard coded, they will be disabled + * in cpu_init_f, so we use entry 16 for nand. + */ + SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 16, BOOKE_PAGESZ_1M, 1), +#endif }; int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/board/freescale/mpc8360emds/mpc8360emds.c b/board/freescale/mpc8360emds/mpc8360emds.c index 0babd26..51d8035 100644 --- a/board/freescale/mpc8360emds/mpc8360emds.c +++ b/board/freescale/mpc8360emds/mpc8360emds.c @@ -16,6 +16,7 @@ #include <mpc83xx.h> #include <i2c.h> #include <miiphy.h> +#include <phy.h> #if defined(CONFIG_PCI) #include <pci.h> #endif @@ -160,8 +161,9 @@ int board_eth_init(bd_t *bd) int i; for (i = 0; i < ARRAY_SIZE(uec_info); i++) - uec_info[i].enet_interface_type = RGMII_RXID; - uec_info[i].speed = 1000; + uec_info[i].enet_interface_type = + PHY_INTERFACE_MODE_RGMII_RXID; + uec_info[i].speed = SPEED_1000; } return uec_eth_init(bd, uec_info, ARRAY_SIZE(uec_info)); } @@ -398,7 +400,7 @@ void ft_board_setup(void *blob, bd_t *bd) "phy-connection-type", 0); if (prop && (strcmp(prop, "rgmii-id") == 0)) fdt_fixup_phy_connection(blob, path, - RGMII_RXID); + PHY_INTERFACE_MODE_RGMII_RXID); } #endif #if defined(CONFIG_HAS_ETH1) @@ -410,7 +412,7 @@ void ft_board_setup(void *blob, bd_t *bd) "phy-connection-type", 0); if (prop && (strcmp(prop, "rgmii-id") == 0)) fdt_fixup_phy_connection(blob, path, - RGMII_RXID); + PHY_INTERFACE_MODE_RGMII_RXID); } #endif } diff --git a/board/freescale/mpc837xemds/mpc837xemds.c b/board/freescale/mpc837xemds/mpc837xemds.c index 51dd692..650a4fe 100644 --- a/board/freescale/mpc837xemds/mpc837xemds.c +++ b/board/freescale/mpc837xemds/mpc837xemds.c @@ -21,6 +21,8 @@ #include <libfdt.h> #include <fdt_support.h> #include <fsl_esdhc.h> +#include <fsl_mdio.h> +#include <phy.h> #include "pci.h" #include "../common/pq-mds-pib.h" @@ -86,6 +88,7 @@ int board_mmc_init(bd_t *bd) #if defined(CONFIG_TSEC1) || defined(CONFIG_TSEC2) int board_eth_init(bd_t *bd) { + struct fsl_pq_mdio_info mdio_info; struct tsec_info_struct tsec_info[2]; struct immap __iomem *im = (struct immap __iomem *)CONFIG_SYS_IMMR; u32 rcwh = in_be32(&im->reset.rcwh); @@ -131,6 +134,11 @@ int board_eth_init(bd_t *bd) } num++; #endif + + mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR; + mdio_info.name = DEFAULT_MII_NAME; + fsl_pq_mdio_init(bd, &mdio_info); + return tsec_eth_init(bd, tsec_info, num); } @@ -148,7 +156,7 @@ static void __ft_tsec_fixup(void *blob, bd_t *bd, const char *alias, return; } - err = fdt_fixup_phy_connection(blob, off, SGMII); + err = fdt_fixup_phy_connection(blob, off, PHY_INTERFACE_MODE_SGMII); if (err) { printf("WARNING: could not set phy-connection-type for %s: " diff --git a/board/freescale/mpc8536ds/config.mk b/board/freescale/mpc8536ds/config.mk deleted file mode 100644 index 228d8c0..0000000 --- a/board/freescale/mpc8536ds/config.mk +++ /dev/null @@ -1,30 +0,0 @@ -# -# Copyright 2008, 2011 Freescale Semiconductor. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -# -# mpc8536ds board -# -ifndef NAND_SPL -ifeq ($(CONFIG_NAND), y) -LDSCRIPT := $(TOPDIR)/$(CPUDIR)/u-boot-nand.lds -endif -endif diff --git a/board/freescale/mpc8536ds/ddr.c b/board/freescale/mpc8536ds/ddr.c index 2bad787..d10370c 100644 --- a/board/freescale/mpc8536ds/ddr.c +++ b/board/freescale/mpc8536ds/ddr.c @@ -7,36 +7,10 @@ */ #include <common.h> -#include <i2c.h> #include <asm/fsl_ddr_sdram.h> #include <asm/fsl_ddr_dimm_params.h> -static void get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address) -{ - i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr2_spd_eeprom_t)); -} - -unsigned int fsl_ddr_get_mem_data_rate(void) -{ - return get_ddr_freq(0); -} - -void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd, - unsigned int ctrl_num) -{ - unsigned int i; - - if (ctrl_num) { - printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num); - return; - } - - for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) { - get_spd(&(ctrl_dimms_spd[i]), SPD_EEPROM_ADDRESS); - } -} - void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, unsigned int ctrl_num) diff --git a/board/freescale/mpc8536ds/mpc8536ds.c b/board/freescale/mpc8536ds/mpc8536ds.c index f83f629..b292e13 100644 --- a/board/freescale/mpc8536ds/mpc8536ds.c +++ b/board/freescale/mpc8536ds/mpc8536ds.c @@ -36,6 +36,7 @@ #include <libfdt.h> #include <spd_sdram.h> #include <fdt_support.h> +#include <fsl_mdio.h> #include <tsec.h> #include <netdev.h> #include <sata.h> @@ -234,6 +235,7 @@ int board_early_init_r(void) int board_eth_init(bd_t *bis) { #ifdef CONFIG_TSEC_ENET + struct fsl_pq_mdio_info mdio_info; struct tsec_info_struct tsec_info[2]; int num = 0; @@ -268,6 +270,10 @@ int board_eth_init(bd_t *bis) } #endif + mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR; + mdio_info.name = DEFAULT_MII_NAME; + fsl_pq_mdio_init(bis, &mdio_info); + tsec_eth_init(bis, tsec_info, num); #endif return pci_eth_init(bis); diff --git a/board/freescale/mpc8540ads/ddr.c b/board/freescale/mpc8540ads/ddr.c index 93d1100..5711374 100644 --- a/board/freescale/mpc8540ads/ddr.c +++ b/board/freescale/mpc8540ads/ddr.c @@ -7,40 +7,10 @@ */ #include <common.h> -#include <i2c.h> #include <asm/fsl_ddr_sdram.h> #include <asm/fsl_ddr_dimm_params.h> -static void -get_spd(ddr1_spd_eeprom_t *spd, unsigned char i2c_address) -{ - i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr1_spd_eeprom_t)); -} - - -unsigned int -fsl_ddr_get_mem_data_rate(void) -{ - return get_ddr_freq(0); -} - - -void -fsl_ddr_get_spd(ddr1_spd_eeprom_t *ctrl_dimms_spd, - unsigned int ctrl_num) -{ - unsigned int i; - unsigned int i2c_address = 0; - - for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) { - if (ctrl_num == 0 && i == 0) { - i2c_address = SPD_EEPROM_ADDRESS; - } - get_spd(&(ctrl_dimms_spd[i]), i2c_address); - } -} - void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, unsigned int ctrl_num) diff --git a/board/freescale/mpc8541cds/ddr.c b/board/freescale/mpc8541cds/ddr.c index c84a6cb..78d73b0 100644 --- a/board/freescale/mpc8541cds/ddr.c +++ b/board/freescale/mpc8541cds/ddr.c @@ -7,36 +7,10 @@ */ #include <common.h> -#include <i2c.h> #include <asm/fsl_ddr_sdram.h> #include <asm/fsl_ddr_dimm_params.h> -static void -get_spd(ddr1_spd_eeprom_t *spd, unsigned char i2c_address) -{ - i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr1_spd_eeprom_t)); -} - -unsigned int fsl_ddr_get_mem_data_rate(void) -{ - return get_ddr_freq(0); -} - -void fsl_ddr_get_spd(ddr1_spd_eeprom_t *ctrl_dimms_spd, - unsigned int ctrl_num) -{ - unsigned int i; - unsigned int i2c_address = 0; - - for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) { - if (ctrl_num == 0 && i == 0) { - i2c_address = SPD_EEPROM_ADDRESS; - } - get_spd(&(ctrl_dimms_spd[i]), i2c_address); - } -} - void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, unsigned int ctrl_num) diff --git a/board/freescale/mpc8544ds/ddr.c b/board/freescale/mpc8544ds/ddr.c index b8330eb..94219b9 100644 --- a/board/freescale/mpc8544ds/ddr.c +++ b/board/freescale/mpc8544ds/ddr.c @@ -7,37 +7,10 @@ */ #include <common.h> -#include <i2c.h> #include <asm/fsl_ddr_sdram.h> #include <asm/fsl_ddr_dimm_params.h> -static void -get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address) -{ - i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr2_spd_eeprom_t)); -} - -unsigned int fsl_ddr_get_mem_data_rate(void) -{ - return get_ddr_freq(0); -} - -void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd, - unsigned int ctrl_num) -{ - unsigned int i; - - if (ctrl_num) { - printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num); - return; - } - - for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) { - get_spd(&(ctrl_dimms_spd[i]), SPD_EEPROM_ADDRESS); - } -} - void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, unsigned int ctrl_num) diff --git a/board/freescale/mpc8544ds/mpc8544ds.c b/board/freescale/mpc8544ds/mpc8544ds.c index a48c815..6fe8d39 100644 --- a/board/freescale/mpc8544ds/mpc8544ds.c +++ b/board/freescale/mpc8544ds/mpc8544ds.c @@ -33,6 +33,7 @@ #include <miiphy.h> #include <libfdt.h> #include <fdt_support.h> +#include <fsl_mdio.h> #include <tsec.h> #include <netdev.h> @@ -248,9 +249,35 @@ get_board_sys_clk(ulong dummy) return val; } + +#define MIIM_CIS8204_SLED_CON 0x1b +#define MIIM_CIS8204_SLEDCON_INIT 0x1115 +/* + * Hack to write all 4 PHYs with the LED values + */ +int board_phy_config(struct phy_device *phydev) +{ + static int do_once; + uint phyid; + struct mii_dev *bus = phydev->bus; + + if (do_once) + return 0; + + for (phyid = 0; phyid < 4; phyid++) + bus->write(bus, phyid, MDIO_DEVAD_NONE, MIIM_CIS8204_SLED_CON, + MIIM_CIS8204_SLEDCON_INIT); + + do_once = 1; + + return 0; +} + + int board_eth_init(bd_t *bis) { #ifdef CONFIG_TSEC_ENET + struct fsl_pq_mdio_info mdio_info; struct tsec_info_struct tsec_info[2]; int num = 0; @@ -282,6 +309,9 @@ int board_eth_init(bd_t *bis) fsl_sgmii_riser_init(tsec_info, num); } + mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR; + mdio_info.name = DEFAULT_MII_NAME; + fsl_pq_mdio_init(bis, &mdio_info); tsec_eth_init(bis, tsec_info, num); #endif diff --git a/board/freescale/mpc8548cds/ddr.c b/board/freescale/mpc8548cds/ddr.c index ab64fa8..996ffe2 100644 --- a/board/freescale/mpc8548cds/ddr.c +++ b/board/freescale/mpc8548cds/ddr.c @@ -7,37 +7,10 @@ */ #include <common.h> -#include <i2c.h> #include <asm/fsl_ddr_sdram.h> #include <asm/fsl_ddr_dimm_params.h> -static void -get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address) -{ - i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr2_spd_eeprom_t)); -} - -unsigned int fsl_ddr_get_mem_data_rate(void) -{ - return get_ddr_freq(0); -} - -void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd, - unsigned int ctrl_num) -{ - unsigned int i; - - if (ctrl_num) { - printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num); - return; - } - - for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) { - get_spd(&(ctrl_dimms_spd[i]), SPD_EEPROM_ADDRESS); - } -} - void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, unsigned int ctrl_num) diff --git a/board/freescale/mpc8555cds/ddr.c b/board/freescale/mpc8555cds/ddr.c index c84a6cb..78d73b0 100644 --- a/board/freescale/mpc8555cds/ddr.c +++ b/board/freescale/mpc8555cds/ddr.c @@ -7,36 +7,10 @@ */ #include <common.h> -#include <i2c.h> #include <asm/fsl_ddr_sdram.h> #include <asm/fsl_ddr_dimm_params.h> -static void -get_spd(ddr1_spd_eeprom_t *spd, unsigned char i2c_address) -{ - i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr1_spd_eeprom_t)); -} - -unsigned int fsl_ddr_get_mem_data_rate(void) -{ - return get_ddr_freq(0); -} - -void fsl_ddr_get_spd(ddr1_spd_eeprom_t *ctrl_dimms_spd, - unsigned int ctrl_num) -{ - unsigned int i; - unsigned int i2c_address = 0; - - for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) { - if (ctrl_num == 0 && i == 0) { - i2c_address = SPD_EEPROM_ADDRESS; - } - get_spd(&(ctrl_dimms_spd[i]), i2c_address); - } -} - void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, unsigned int ctrl_num) diff --git a/board/freescale/mpc8560ads/ddr.c b/board/freescale/mpc8560ads/ddr.c index 93d1100..5711374 100644 --- a/board/freescale/mpc8560ads/ddr.c +++ b/board/freescale/mpc8560ads/ddr.c @@ -7,40 +7,10 @@ */ #include <common.h> -#include <i2c.h> #include <asm/fsl_ddr_sdram.h> #include <asm/fsl_ddr_dimm_params.h> -static void -get_spd(ddr1_spd_eeprom_t *spd, unsigned char i2c_address) -{ - i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr1_spd_eeprom_t)); -} - - -unsigned int -fsl_ddr_get_mem_data_rate(void) -{ - return get_ddr_freq(0); -} - - -void -fsl_ddr_get_spd(ddr1_spd_eeprom_t *ctrl_dimms_spd, - unsigned int ctrl_num) -{ - unsigned int i; - unsigned int i2c_address = 0; - - for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) { - if (ctrl_num == 0 && i == 0) { - i2c_address = SPD_EEPROM_ADDRESS; - } - get_spd(&(ctrl_dimms_spd[i]), i2c_address); - } -} - void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, unsigned int ctrl_num) diff --git a/board/freescale/mpc8568mds/ddr.c b/board/freescale/mpc8568mds/ddr.c index 482fd91..b1f4f1f 100644 --- a/board/freescale/mpc8568mds/ddr.c +++ b/board/freescale/mpc8568mds/ddr.c @@ -7,38 +7,10 @@ */ #include <common.h> -#include <i2c.h> #include <asm/fsl_ddr_sdram.h> #include <asm/fsl_ddr_dimm_params.h> -static void -get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address) -{ - i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr2_spd_eeprom_t)); -} - - -unsigned int fsl_ddr_get_mem_data_rate(void) -{ - return get_ddr_freq(0); -} - -void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd, - unsigned int ctrl_num) -{ - unsigned int i; - - if (ctrl_num) { - printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num); - return; - } - - for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) { - get_spd(&(ctrl_dimms_spd[i]), SPD_EEPROM_ADDRESS); - } -} - void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, unsigned int ctrl_num) diff --git a/board/freescale/mpc8569mds/config.mk b/board/freescale/mpc8569mds/config.mk deleted file mode 100644 index 54b2eb1..0000000 --- a/board/freescale/mpc8569mds/config.mk +++ /dev/null @@ -1,30 +0,0 @@ -# -# Copyright (C) 2009 Freescale Semiconductor, Inc. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -# -# mpc8569mds board -# -ifndef NAND_SPL -ifeq ($(CONFIG_NAND), y) -LDSCRIPT := $(TOPDIR)/$(CPUDIR)/u-boot-nand.lds -endif -endif diff --git a/board/freescale/mpc8569mds/ddr.c b/board/freescale/mpc8569mds/ddr.c index e3f5b4a..68f686b 100644 --- a/board/freescale/mpc8569mds/ddr.c +++ b/board/freescale/mpc8569mds/ddr.c @@ -7,38 +7,10 @@ */ #include <common.h> -#include <i2c.h> #include <asm/fsl_ddr_sdram.h> #include <asm/fsl_ddr_dimm_params.h> -static void -get_spd(ddr3_spd_eeprom_t *spd, unsigned char i2c_address) -{ - i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr3_spd_eeprom_t)); -} - - -unsigned int fsl_ddr_get_mem_data_rate(void) -{ - return get_ddr_freq(0); -} - -void fsl_ddr_get_spd(ddr3_spd_eeprom_t *ctrl_dimms_spd, - unsigned int ctrl_num) -{ - unsigned int i; - unsigned int i2c_address = 0; - - for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) { - if (ctrl_num == 0 && i == 0) - i2c_address = SPD_EEPROM_ADDRESS1; - if (ctrl_num == 0 && i == 1) - i2c_address = SPD_EEPROM_ADDRESS2; - get_spd(&(ctrl_dimms_spd[i]), i2c_address); - } -} - void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, unsigned int ctrl_num) diff --git a/board/freescale/mpc8569mds/mpc8569mds.c b/board/freescale/mpc8569mds/mpc8569mds.c index ecda222..89557d2 100644 --- a/board/freescale/mpc8569mds/mpc8569mds.c +++ b/board/freescale/mpc8569mds/mpc8569mds.c @@ -39,6 +39,7 @@ #include <libfdt.h> #include <fdt_support.h> #include <fsl_esdhc.h> +#include <phy.h> #include "bcsr.h" #if defined(CONFIG_PQ_MDS_PIB) @@ -550,7 +551,8 @@ void ft_board_setup(void *blob, bd_t *bd) break; } - err = fdt_fixup_phy_connection(blob, nodeoff, RMII); + err = fdt_fixup_phy_connection(blob, nodeoff, + PHY_INTERFACE_MODE_RMII); if (err < 0) { printf("WARNING: could not set phy-connection-type " diff --git a/board/freescale/mpc8572ds/config.mk b/board/freescale/mpc8572ds/config.mk deleted file mode 100644 index 9fd30f9..0000000 --- a/board/freescale/mpc8572ds/config.mk +++ /dev/null @@ -1,30 +0,0 @@ -# -# Copyright 2007-2008,2010-2011 Freescale Semiconductor, Inc. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -# -# mpc8572ds board -# -ifndef NAND_SPL -ifeq ($(CONFIG_NAND), y) -LDSCRIPT := $(TOPDIR)/$(CPUDIR)/u-boot-nand.lds -endif -endif diff --git a/board/freescale/mpc8572ds/ddr.c b/board/freescale/mpc8572ds/ddr.c index cdde6ec..ab471af 100644 --- a/board/freescale/mpc8572ds/ddr.c +++ b/board/freescale/mpc8572ds/ddr.c @@ -7,38 +7,10 @@ */ #include <common.h> -#include <i2c.h> #include <asm/fsl_ddr_sdram.h> #include <asm/fsl_ddr_dimm_params.h> -static void get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address) -{ - i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr2_spd_eeprom_t)); -} - -unsigned int fsl_ddr_get_mem_data_rate(void) -{ - return get_ddr_freq(0); -} - -void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd, - unsigned int ctrl_num) -{ - unsigned int i; - unsigned int i2c_address = 0; - - for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) { - if (ctrl_num == 0 && i == 0) { - i2c_address = SPD_EEPROM_ADDRESS1; - } - if (ctrl_num == 1 && i == 0) { - i2c_address = SPD_EEPROM_ADDRESS2; - } - get_spd(&(ctrl_dimms_spd[i]), i2c_address); - } -} - typedef struct { u32 datarate_mhz_low; u32 datarate_mhz_high; diff --git a/board/freescale/mpc8572ds/mpc8572ds.c b/board/freescale/mpc8572ds/mpc8572ds.c index 4b2ef4e..b20299e 100644 --- a/board/freescale/mpc8572ds/mpc8572ds.c +++ b/board/freescale/mpc8572ds/mpc8572ds.c @@ -1,5 +1,5 @@ /* - * Copyright 2007-2010 Freescale Semiconductor, Inc. + * Copyright 2007-2011 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -35,6 +35,7 @@ #include <libfdt.h> #include <fdt_support.h> #include <tsec.h> +#include <fsl_mdio.h> #include <netdev.h> #include "../common/sgmii_riser.h" @@ -187,6 +188,7 @@ int board_early_init_r(void) #ifdef CONFIG_TSEC_ENET int board_eth_init(bd_t *bis) { + struct fsl_pq_mdio_info mdio_info; struct tsec_info_struct tsec_info[4]; int num = 0; @@ -233,6 +235,10 @@ int board_eth_init(bd_t *bis) fsl_sgmii_riser_init(tsec_info, num); #endif + mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR; + mdio_info.name = DEFAULT_MII_NAME; + fsl_pq_mdio_init(bis, &mdio_info); + tsec_eth_init(bis, tsec_info, num); return pci_eth_init(bis); @@ -259,12 +265,3 @@ void ft_board_setup(void *blob, bd_t *bd) #endif } #endif - -#ifdef CONFIG_MP -extern void cpu_mp_lmb_reserve(struct lmb *lmb); - -void board_lmb_reserve(struct lmb *lmb) -{ - cpu_mp_lmb_reserve(lmb); -} -#endif diff --git a/board/freescale/mpc8610hpcd/ddr.c b/board/freescale/mpc8610hpcd/ddr.c index 0117d13..94219b9 100644 --- a/board/freescale/mpc8610hpcd/ddr.c +++ b/board/freescale/mpc8610hpcd/ddr.c @@ -7,36 +7,10 @@ */ #include <common.h> -#include <i2c.h> #include <asm/fsl_ddr_sdram.h> #include <asm/fsl_ddr_dimm_params.h> -static void -get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address) -{ - i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr2_spd_eeprom_t)); -} - -unsigned int fsl_ddr_get_mem_data_rate(void) -{ - return get_bus_freq(0); -} - -void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd, - unsigned int ctrl_num) -{ - unsigned int i; - unsigned int i2c_address = 0; - - for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) { - if (ctrl_num == 0 && i == 0) { - i2c_address = SPD_EEPROM_ADDRESS1; - } - get_spd(&(ctrl_dimms_spd[i]), i2c_address); - } -} - void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, unsigned int ctrl_num) diff --git a/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c b/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c index 81e53e7..3011bb8 100644 --- a/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c +++ b/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c @@ -1,6 +1,7 @@ /* - * Copyright 2007 Freescale Semiconductor, Inc. - * York Sun <yorksun@freescale.com> + * Copyright 2007-2011 Freescale Semiconductor, Inc. + * Authors: York Sun <yorksun@freescale.com> + * Timur Tabi <timur@freescale.com> * * FSL DIU Framebuffer driver * @@ -27,6 +28,10 @@ #include <command.h> #include <asm/io.h> #include <fsl_diu_fb.h> +#include "../common/pixis.h" + +#define PX_BRDCFG0_DLINK 0x10 +#define PX_BRDCFG0_DVISEL 0x08 void diu_set_pixel_clock(unsigned int pixclock) { @@ -49,50 +54,34 @@ void diu_set_pixel_clock(unsigned int pixclock) debug("DIU: Modified value of CLKDVDR = 0x%08x\n", *guts_clkdvdr); } -int platform_diu_init(unsigned int *xres, unsigned int *yres) +int platform_diu_init(unsigned int xres, unsigned int yres, const char *port) { - char *monitor_port; - int gamma_fix; - unsigned int pixel_format; - unsigned char tmp_val; - unsigned char pixis_arch; - u8 *pixis_base = (u8 *)PIXIS_BASE; - - tmp_val = in_8(pixis_base + PIXIS_BRDCFG0); - pixis_arch = in_8(pixis_base + PIXIS_VER); - - monitor_port = getenv("monitor"); - if (!strncmp(monitor_port, "0", 1)) { /* 0 - DVI */ - *xres = 1280; - *yres = 1024; - if (pixis_arch == 0x01) - pixel_format = 0x88882317; - else - pixel_format = 0x88883316; - gamma_fix = 0; - out_8(pixis_base + PIXIS_BRDCFG0, tmp_val | 0x08); + const char *name; + int gamma_fix = 0; + u32 pixel_format = 0x88883316; + u8 temp; - } else if (!strncmp(monitor_port, "1", 1)) { /* 1 - Single link LVDS */ - *xres = 1024; - *yres = 768; - pixel_format = 0x88883316; - gamma_fix = 0; - out_8(pixis_base + PIXIS_BRDCFG0, (tmp_val & 0xf7) | 0x10); + temp = in_8(&pixis->brdcfg0); - } else if (!strncmp(monitor_port, "2", 1)) { /* 2 - Double link LVDS */ - *xres = 1280; - *yres = 1024; - pixel_format = 0x88883316; + if (strncmp(port, "dlvds", 5) == 0) { + /* Dual link LVDS */ gamma_fix = 1; - out_8(pixis_base + PIXIS_BRDCFG0, tmp_val & 0xe7); - - } else { /* DVI */ - *xres = 1280; - *yres = 1024; - pixel_format = 0x88882317; - gamma_fix = 0; - out_8(pixis_base + PIXIS_BRDCFG0, tmp_val | 0x08); + temp &= ~(PX_BRDCFG0_DLINK | PX_BRDCFG0_DVISEL); + name = "Dual-Link LVDS"; + } else if (strncmp(port, "lvds", 4) == 0) { + /* Single link LVDS */ + temp = (temp & ~PX_BRDCFG0_DVISEL) | PX_BRDCFG0_DLINK; + name = "Single-Link LVDS"; + } else { + /* DVI */ + if (in_8(&pixis->ver) == 1) /* Board version */ + pixel_format = 0x88882317; + temp |= PX_BRDCFG0_DVISEL; + name = "DVI"; } - return fsl_diu_init(*xres, pixel_format, gamma_fix); + printf("DIU: Switching to %s monitor @ %ux%u\n", name, xres, yres); + out_8(&pixis->brdcfg0, temp); + + return fsl_diu_init(xres, pixel_format, gamma_fix); } diff --git a/board/freescale/mpc8641hpcn/ddr.c b/board/freescale/mpc8641hpcn/ddr.c index 8dc249b..bd0b299 100644 --- a/board/freescale/mpc8641hpcn/ddr.c +++ b/board/freescale/mpc8641hpcn/ddr.c @@ -7,45 +7,10 @@ */ #include <common.h> -#include <i2c.h> #include <asm/fsl_ddr_sdram.h> #include <asm/fsl_ddr_dimm_params.h> -static void -get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address) -{ - i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr2_spd_eeprom_t)); -} - -unsigned int fsl_ddr_get_mem_data_rate(void) -{ - return get_bus_freq(0); -} - -void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd, - unsigned int ctrl_num) -{ - unsigned int i; - unsigned int i2c_address = 0; - - for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) { - if (ctrl_num == 0 && i == 0) { - i2c_address = SPD_EEPROM_ADDRESS1; - } - if (ctrl_num == 0 && i == 1) { - i2c_address = SPD_EEPROM_ADDRESS2; - } - if (ctrl_num == 1 && i == 0) { - i2c_address = SPD_EEPROM_ADDRESS3; - } - if (ctrl_num == 1 && i == 1) { - i2c_address = SPD_EEPROM_ADDRESS4; - } - get_spd(&(ctrl_dimms_spd[i]), i2c_address); - } -} - typedef struct { u32 datarate_mhz_low; u32 datarate_mhz_high; @@ -144,7 +109,7 @@ void fsl_ddr_board_options(memctl_options_t *popts, /* Get clk_adjust, cpo, write_data_delay, according to the board ddr * freqency and n_banks specified in board_specific_parameters table. */ - ddr_freq = fsl_ddr_get_mem_data_rate() / 1000000; + ddr_freq = get_ddr_freq(0) / 1000000; for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) { if (pdimm[j].n_ranks > 0) { for (i = 0; i < num_params; i++) { diff --git a/board/freescale/mpc8641hpcn/mpc8641hpcn.c b/board/freescale/mpc8641hpcn/mpc8641hpcn.c index 166ff0c..e3916fc 100644 --- a/board/freescale/mpc8641hpcn/mpc8641hpcn.c +++ b/board/freescale/mpc8641hpcn/mpc8641hpcn.c @@ -1,5 +1,5 @@ /* - * Copyright 2006, 2007, 2010 Freescale Semiconductor. + * Copyright 2006, 2007, 2010-2011 Freescale Semiconductor. * * See file CREDITS for list of people who contributed to this * project. @@ -34,11 +34,6 @@ phys_size_t fixed_sdram(void); -int board_early_init_f(void) -{ - return 0; -} - int checkboard(void) { u8 vboot; @@ -261,12 +256,3 @@ void board_reset(void) while (1) ; } - -#ifdef CONFIG_MP -extern void cpu_mp_lmb_reserve(struct lmb *lmb); - -void board_lmb_reserve(struct lmb *lmb) -{ - cpu_mp_lmb_reserve(lmb); -} -#endif diff --git a/board/freescale/mx31ads/config.mk b/board/freescale/mx31ads/config.mk index 2303f30..0131edf 100644 --- a/board/freescale/mx31ads/config.mk +++ b/board/freescale/mx31ads/config.mk @@ -1,3 +1 @@ CONFIG_SYS_TEXT_BASE = 0x87f00000 - -LDSCRIPT := $(SRCTREE)/board/$(BOARDDIR)/u-boot.lds diff --git a/board/freescale/mx31ads/lowlevel_init.S b/board/freescale/mx31ads/lowlevel_init.S index e166058..5c18bc1 100644 --- a/board/freescale/mx31ads/lowlevel_init.S +++ b/board/freescale/mx31ads/lowlevel_init.S @@ -17,7 +17,7 @@ * MA 02111-1307 USA */ -#include <asm/arch/mx31-regs.h> +#include <asm/arch/imx-regs.h> .macro REG reg, val ldr r2, =\reg diff --git a/board/freescale/mx31ads/mx31ads.c b/board/freescale/mx31ads/mx31ads.c index bc25c6d..a298e05 100644 --- a/board/freescale/mx31ads/mx31ads.c +++ b/board/freescale/mx31ads/mx31ads.c @@ -23,8 +23,8 @@ #include <common.h> #include <netdev.h> #include <asm/io.h> -#include <asm/arch/mx31.h> -#include <asm/arch/mx31-regs.h> +#include <asm/arch/clock.h> +#include <asm/arch/imx-regs.h> DECLARE_GLOBAL_DATA_PTR; diff --git a/board/freescale/mx31pdk/lowlevel_init.S b/board/freescale/mx31pdk/lowlevel_init.S index cd0503e..5b35bb4 100644 --- a/board/freescale/mx31pdk/lowlevel_init.S +++ b/board/freescale/mx31pdk/lowlevel_init.S @@ -21,7 +21,7 @@ */ #include <config.h> -#include <asm/arch/mx31-regs.h> +#include <asm/arch/imx-regs.h> #include <asm/macro.h> .globl lowlevel_init diff --git a/board/freescale/mx31pdk/mx31pdk.c b/board/freescale/mx31pdk/mx31pdk.c index a9f0fb4..826fb4a 100644 --- a/board/freescale/mx31pdk/mx31pdk.c +++ b/board/freescale/mx31pdk/mx31pdk.c @@ -26,8 +26,8 @@ #include <common.h> #include <netdev.h> -#include <asm/arch/mx31.h> -#include <asm/arch/mx31-regs.h> +#include <asm/arch/clock.h> +#include <asm/arch/imx-regs.h> DECLARE_GLOBAL_DATA_PTR; @@ -70,7 +70,7 @@ int board_init(void) int checkboard(void) { - printf("Board: i.MX31 MAX PDK (3DS)\n"); + printf("Board: MX31PDK\n"); return 0; } diff --git a/board/freescale/mx51evk/config.mk b/board/freescale/mx51evk/config.mk deleted file mode 100644 index 6e90671..0000000 --- a/board/freescale/mx51evk/config.mk +++ /dev/null @@ -1,25 +0,0 @@ -# -# Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -CONFIG_SYS_TEXT_BASE = 0x97800000 -IMX_CONFIG = $(SRCTREE)/board/$(BOARDDIR)/imximage.cfg -ALL += $(obj)u-boot.imx diff --git a/board/freescale/mx53evk/config.mk b/board/freescale/mx53evk/config.mk deleted file mode 100644 index 0e60454..0000000 --- a/board/freescale/mx53evk/config.mk +++ /dev/null @@ -1,24 +0,0 @@ -# -# Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -IMX_CONFIG = $(SRCTREE)/board/$(BOARDDIR)/imximage.cfg -ALL += $(obj)u-boot.imx diff --git a/board/freescale/p1022ds/ddr.c b/board/freescale/p1022ds/ddr.c index 7ecfb3e..20b996e 100644 --- a/board/freescale/p1022ds/ddr.c +++ b/board/freescale/p1022ds/ddr.c @@ -10,33 +10,10 @@ */ #include <common.h> -#include <i2c.h> #include <asm/fsl_ddr_sdram.h> #include <asm/fsl_ddr_dimm_params.h> -unsigned int fsl_ddr_get_mem_data_rate(void) -{ - return get_ddr_freq(0); -} - -void fsl_ddr_get_spd(ddr3_spd_eeprom_t *ctrl_dimms_spd, unsigned int ctrl_num) -{ - int ret; - - /* - * The P1022 has only one DDR controller, and the board has only one - * DIMM slot. - */ - ret = i2c_read(SPD_EEPROM_ADDRESS1, 0, 1, (u8 *)ctrl_dimms_spd, - sizeof(ddr3_spd_eeprom_t)); - if (ret) { - debug("DDR: failed to read SPD from address %u\n", - SPD_EEPROM_ADDRESS1); - memset(ctrl_dimms_spd, 0, sizeof(ddr3_spd_eeprom_t)); - } -} - typedef struct { u32 datarate_mhz_low; u32 datarate_mhz_high; diff --git a/board/freescale/p1022ds/diu.c b/board/freescale/p1022ds/diu.c index 8f5305c..7d1f6aa 100644 --- a/board/freescale/p1022ds/diu.c +++ b/board/freescale/p1022ds/diu.c @@ -1,5 +1,5 @@ /* - * Copyright 2010 Freescale Semiconductor, Inc. + * Copyright 2010-2011 Freescale Semiconductor, Inc. * Authors: Timur Tabi <timur@freescale.com> * * FSL DIU Framebuffer driver @@ -12,6 +12,7 @@ #include <common.h> #include <command.h> +#include <linux/ctype.h> #include <asm/io.h> #include <stdio_dev.h> #include <video_fb.h> @@ -81,10 +82,10 @@ void diu_set_pixel_clock(unsigned int pixclock) out_be32(&gur->clkdvdr, temp | 0x80000000 | ((pixval & 0x1F) << 16)); } -int platform_diu_init(unsigned int *xres, unsigned int *yres) +int platform_diu_init(unsigned int xres, unsigned int yres, const char *port) { ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - char *monitor_port; + const char *name; u32 pixel_format; u8 temp; @@ -100,21 +101,23 @@ int platform_diu_init(unsigned int *xres, unsigned int *yres) temp = in_8(&pixis->brdcfg1); - monitor_port = getenv("monitor"); - if (!strncmp(monitor_port, "1", 1)) { /* 1 - Single link LVDS */ - *xres = 1024; - *yres = 768; - /* Enable the DFP port, disable the DVI and the backlight */ - temp &= ~(PX_BRDCFG1_DVIEN | PX_BRDCFG1_BACKLIGHT); - temp |= PX_BRDCFG1_DFPEN; + if (strncmp(port, "lvds", 4) == 0) { + /* Single link LVDS */ + temp &= ~PX_BRDCFG1_DVIEN; + /* + * LVDS also needs backlight enabled, otherwise the display + * will be blank. + */ + temp |= (PX_BRDCFG1_DFPEN | PX_BRDCFG1_BACKLIGHT); + name = "Single-Link LVDS"; } else { /* DVI */ - *xres = 1280; - *yres = 1024; /* Enable the DVI port, disable the DFP and the backlight */ temp &= ~(PX_BRDCFG1_DFPEN | PX_BRDCFG1_BACKLIGHT); temp |= PX_BRDCFG1_DVIEN; + name = "DVI"; } + printf("DIU: Switching to %s monitor @ %ux%u\n", name, xres, yres); out_8(&pixis->brdcfg1, temp); /* @@ -136,11 +139,9 @@ int platform_diu_init(unsigned int *xres, unsigned int *yres) clrsetbits_be32(&gur->pmuxcr, PMUXCR_ELBCDIU_MASK, PMUXCR_ELBCDIU_DIU); pmuxcr = in_be32(&gur->pmuxcr); - return fsl_diu_init(*xres, pixel_format, 0); + return fsl_diu_init(xres, pixel_format, 0); } -#ifdef CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS - /* * set_mux_to_lbc - disable the DIU so that we can read/write to elbc * @@ -211,6 +212,68 @@ static void set_mux_to_diu(void) in_be32(&gur->pmuxcr); } +/* + * pixis_read - board-specific function to read from the PIXIS + * + * This function overrides the generic pixis_read() function, so that it can + * use PIXIS indirect mode if necessary. + */ +u8 pixis_read(unsigned int reg) +{ + ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; + + /* Use indirect mode if the mux is currently set to DIU mode */ + if ((in_be32(&gur->pmuxcr) & PMUXCR_ELBCDIU_MASK) != + PMUXCR_ELBCDIU_NOR16) { + out_8(lbc_lcs0_ba, reg); + return in_8(lbc_lcs1_ba); + } else { + void *p = (void *)PIXIS_BASE; + + return in_8(p + reg); + } +} + +/* + * pixis_write - board-specific function to write to the PIXIS + * + * This function overrides the generic pixis_write() function, so that it can + * use PIXIS indirect mode if necessary. + */ +void pixis_write(unsigned int reg, u8 value) +{ + ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; + + /* Use indirect mode if the mux is currently set to DIU mode */ + if ((in_be32(&gur->pmuxcr) & PMUXCR_ELBCDIU_MASK) != + PMUXCR_ELBCDIU_NOR16) { + out_8(lbc_lcs0_ba, reg); + out_8(lbc_lcs1_ba, value); + /* Do a read-back to ensure the write completed */ + in_8(lbc_lcs1_ba); + } else { + void *p = (void *)PIXIS_BASE; + + out_8(p + reg, value); + } +} + +void pixis_bank_reset(void) +{ + /* + * For some reason, a PIXIS bank reset does not work if the PIXIS is + * in indirect mode, so switch to direct mode first. + */ + set_mux_to_lbc(); + + out_8(&pixis->vctl, 0); + out_8(&pixis->vctl, 1); + + while (1); +} + +#ifdef CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS + void flash_write8(u8 value, void *addr) { int sw = set_mux_to_lbc(); diff --git a/board/freescale/p1022ds/p1022ds.c b/board/freescale/p1022ds/p1022ds.c index 0ea0bdf..8ef627f 100644 --- a/board/freescale/p1022ds/p1022ds.c +++ b/board/freescale/p1022ds/p1022ds.c @@ -1,5 +1,5 @@ /* - * Copyright 2010 Freescale Semiconductor, Inc. + * Copyright 2010-2011 Freescale Semiconductor, Inc. * Authors: Srikanth Srinivasan <srikanth.srinivasan@freescale.com> * Timur Tabi <timur@freescale.com> * @@ -22,9 +22,9 @@ #include <asm/io.h> #include <libfdt.h> #include <fdt_support.h> +#include <fsl_mdio.h> #include <tsec.h> #include <asm/fsl_law.h> -#include <asm/mp.h> #include <netdev.h> #include <i2c.h> #include <hwconfig.h> @@ -46,6 +46,9 @@ int board_early_init_f(void) /* Set the pin muxing to enable ETSEC2. */ clrbits_be32(&gur->pmuxcr2, 0x001F8000); + /* Enable the SPI */ + clrsetbits_8(&pixis->brdcfg0, PIXIS_ELBC_SPI_MASK, PIXIS_SPI); + return 0; } @@ -54,6 +57,9 @@ int checkboard(void) u8 sw; puts("Board: P1022DS "); +#ifdef CONFIG_PHYS_64BIT + puts("(36-bit addrmap) "); +#endif printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ", in_8(&pixis->id), in_8(&pixis->arch), in_8(&pixis->scver)); @@ -91,11 +97,19 @@ int checkboard(void) /* Choose the 11.2896Mhz codec reference clock */ #define CONFIG_PIXIS_BRDCFG1_AUDCLK_11 0x01 +/* Connect to USB2 */ +#define CONFIG_PIXIS_BRDCFG0_USB2 0x10 +/* Connect to TFM bus */ +#define CONFIG_PIXIS_BRDCFG1_TDM 0x0c +/* Connect to SPI */ +#define CONFIG_PIXIS_BRDCFG0_SPI 0x80 + int misc_init_r(void) { u8 temp; const char *audclk; size_t arglen; + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); /* For DVI, enable the TFP410 Encoder. */ @@ -113,22 +127,48 @@ int misc_init_r(void) return -1; debug("DVI Encoder Read: 0x%02x\n",temp); + /* Enable the USB2 in PMUXCR2 and FGPA */ + if (hwconfig("usb2")) { + clrsetbits_be32(&gur->pmuxcr2, MPC85xx_PMUXCR2_ETSECUSB_MASK, + MPC85xx_PMUXCR2_USB); + setbits_8(&pixis->brdcfg0, CONFIG_PIXIS_BRDCFG0_USB2); + } + + /* tdm and audio can not enable simultaneous*/ + if (hwconfig("tdm") && hwconfig("audclk")){ + printf("WARNING: TDM and AUDIO can not be enabled simultaneous !\n"); + return -1; + } + + /* Enable the TDM in PMUXCR and FGPA */ + if (hwconfig("tdm")) { + clrsetbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_TDM_MASK, + MPC85xx_PMUXCR_TDM); + setbits_8(&pixis->brdcfg1, CONFIG_PIXIS_BRDCFG1_TDM); + /* TDM need some configration option by SPI */ + clrsetbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_SPI_MASK, + MPC85xx_PMUXCR_SPI); + setbits_8(&pixis->brdcfg0, CONFIG_PIXIS_BRDCFG0_SPI); + } + /* * Enable the reference clock for the WM8776 codec, and route the MUX * pins for SSI. The default is the 12.288 MHz clock */ - temp = in_8(&pixis->brdcfg1) & ~(CONFIG_PIXIS_BRDCFG1_SSI_TDM_MASK | - CONFIG_PIXIS_BRDCFG1_AUDCLK_MASK); - temp |= CONFIG_PIXIS_BRDCFG1_SSI_TDM_SSI; - - audclk = hwconfig_arg("audclk", &arglen); - /* Check the first two chars only */ - if (audclk && (strncmp(audclk, "11", 2) == 0)) - temp |= CONFIG_PIXIS_BRDCFG1_AUDCLK_11; - else - temp |= CONFIG_PIXIS_BRDCFG1_AUDCLK_12; - out_8(&pixis->brdcfg1, temp); + if (hwconfig("audclk")) { + temp = in_8(&pixis->brdcfg1) & ~(CONFIG_PIXIS_BRDCFG1_SSI_TDM_MASK | + CONFIG_PIXIS_BRDCFG1_AUDCLK_MASK); + temp |= CONFIG_PIXIS_BRDCFG1_SSI_TDM_SSI; + + audclk = hwconfig_arg("audclk", &arglen); + /* Check the first two chars only */ + if (audclk && (strncmp(audclk, "11", 2) == 0)) + temp |= CONFIG_PIXIS_BRDCFG1_AUDCLK_11; + else + temp |= CONFIG_PIXIS_BRDCFG1_AUDCLK_12; + setbits_8(&pixis->brdcfg1, temp); + } return 0; } @@ -243,6 +283,7 @@ int board_early_init_r(void) */ int board_eth_init(bd_t *bis) { + struct fsl_pq_mdio_info mdio_info; struct tsec_info_struct tsec_info[2]; unsigned int num = 0; @@ -255,6 +296,10 @@ int board_eth_init(bd_t *bis) num++; #endif + mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR; + mdio_info.name = DEFAULT_MII_NAME; + fsl_pq_mdio_init(bis, &mdio_info); + return tsec_eth_init(bis, tsec_info, num) + pci_eth_init(bis); } @@ -302,10 +347,3 @@ void ft_board_setup(void *blob, bd_t *bd) ft_codec_setup(blob, "wlf,wm8776"); } #endif - -#ifdef CONFIG_MP -void board_lmb_reserve(struct lmb *lmb) -{ - cpu_mp_lmb_reserve(lmb); -} -#endif diff --git a/board/freescale/p1_p2_rdb/config.mk b/board/freescale/p1_p2_rdb/config.mk deleted file mode 100644 index 0769804..0000000 --- a/board/freescale/p1_p2_rdb/config.mk +++ /dev/null @@ -1,31 +0,0 @@ -# -# Copyright 2009, 2011 Freescale Semiconductor, Inc. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -# -# p1_p2rdb board -# - -ifndef NAND_SPL -ifeq ($(CONFIG_NAND), y) -LDSCRIPT := $(TOPDIR)/$(CPUDIR)/u-boot-nand.lds -endif -endif diff --git a/board/freescale/p1_p2_rdb/ddr.c b/board/freescale/p1_p2_rdb/ddr.c index e54fde2..71c6088 100644 --- a/board/freescale/p1_p2_rdb/ddr.c +++ b/board/freescale/p1_p2_rdb/ddr.c @@ -1,5 +1,5 @@ /* - * Copyright 2009 Freescale Semiconductor, Inc. + * Copyright 2009, 2011 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -30,14 +30,6 @@ DECLARE_GLOBAL_DATA_PTR; -extern void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, - unsigned int ctrl_num); - -#define DATARATE_400MHZ 400000000 -#define DATARATE_533MHZ 533333333 -#define DATARATE_667MHZ 666666666 -#define DATARATE_800MHZ 800000000 - #define CONFIG_SYS_DDR_CS0_BNDS 0x0000003F #define CONFIG_SYS_DDR_CS0_CONFIG 0x80014202 #define CONFIG_SYS_DDR_CS0_CONFIG_2 0x00000000 @@ -82,13 +74,13 @@ extern void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, #define CONFIG_SYS_DDR_INTERVAL_667 0x0a280100 #define CONFIG_SYS_DDR_TIMING_3_800 0x00040000 -#define CONFIG_SYS_DDR_TIMING_0_800 0x55770802 +#define CONFIG_SYS_DDR_TIMING_0_800 0x00770802 #define CONFIG_SYS_DDR_TIMING_1_800 0x6f6b6543 #define CONFIG_SYS_DDR_TIMING_2_800 0x0fa074d1 #define CONFIG_SYS_DDR_CLK_CTRL_800 0x02800000 #define CONFIG_SYS_DDR_MODE_1_800 0x00040852 #define CONFIG_SYS_DDR_MODE_2_800 0x00000000 -#define CONFIG_SYS_DDR_INTERVAL_800 0x0a280100 +#define CONFIG_SYS_DDR_INTERVAL_800 0x0c300100 fsl_ddr_cfg_regs_t ddr_cfg_regs_400 = { .cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS, @@ -204,38 +196,47 @@ fsl_ddr_cfg_regs_t ddr_cfg_regs_800 = { phys_size_t fixed_sdram (void) { - sys_info_t sysinfo; char buf[32]; fsl_ddr_cfg_regs_t ddr_cfg_regs; size_t ddr_size; struct cpu_type *cpu; + ulong ddr_freq, ddr_freq_mhz; + + cpu = gd->cpu; + /* P1020 and it's derivatives support max 32bit DDR width */ + if (cpu->soc_ver == SVR_P1020 || cpu->soc_ver == SVR_P1020_E || + cpu->soc_ver == SVR_P1011 || cpu->soc_ver == SVR_P1011_E) { + ddr_size = (CONFIG_SYS_SDRAM_SIZE * 1024 * 1024 / 2); + } else { + ddr_size = CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; + } +#if defined(CONFIG_SYS_RAMBOOT) + return ddr_size; +#endif + ddr_freq = get_ddr_freq(0); + ddr_freq_mhz = ddr_freq / 1000000; - get_sys_info(&sysinfo); printf("Configuring DDR for %s MT/s data rate\n", - strmhz(buf, sysinfo.freqDDRBus)); + strmhz(buf, ddr_freq)); - if(sysinfo.freqDDRBus <= DATARATE_400MHZ) + if(ddr_freq_mhz <= 400) memcpy(&ddr_cfg_regs, &ddr_cfg_regs_400, sizeof(ddr_cfg_regs)); - else if(sysinfo.freqDDRBus <= DATARATE_533MHZ) + else if(ddr_freq_mhz <= 533) memcpy(&ddr_cfg_regs, &ddr_cfg_regs_533, sizeof(ddr_cfg_regs)); - else if(sysinfo.freqDDRBus <= DATARATE_667MHZ) + else if(ddr_freq_mhz <= 667) memcpy(&ddr_cfg_regs, &ddr_cfg_regs_667, sizeof(ddr_cfg_regs)); - else if(sysinfo.freqDDRBus <= DATARATE_800MHZ) + else if(ddr_freq_mhz <= 800) memcpy(&ddr_cfg_regs, &ddr_cfg_regs_800, sizeof(ddr_cfg_regs)); else panic("Unsupported DDR data rate %s MT/s data rate\n", - strmhz(buf, sysinfo.freqDDRBus)); + strmhz(buf, ddr_freq)); - cpu = gd->cpu; /* P1020 and it's derivatives support max 32bit DDR width */ if(cpu->soc_ver == SVR_P1020 || cpu->soc_ver == SVR_P1020_E || cpu->soc_ver == SVR_P1011 || cpu->soc_ver == SVR_P1011_E) { ddr_cfg_regs.ddr_sdram_cfg |= SDRAM_CFG_32_BE; ddr_cfg_regs.cs[0].bnds = 0x0000001F; - ddr_size = (CONFIG_SYS_SDRAM_SIZE * 1024 * 1024 / 2); } - else - ddr_size = CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0); diff --git a/board/freescale/p1_p2_rdb/p1_p2_rdb.c b/board/freescale/p1_p2_rdb/p1_p2_rdb.c index 0780942..d66b130 100644 --- a/board/freescale/p1_p2_rdb/p1_p2_rdb.c +++ b/board/freescale/p1_p2_rdb/p1_p2_rdb.c @@ -31,10 +31,12 @@ #include <miiphy.h> #include <libfdt.h> #include <fdt_support.h> +#include <fsl_mdio.h> #include <tsec.h> #include <vsc7385.h> #include <netdev.h> #include <rtc.h> +#include <i2c.h> DECLARE_GLOBAL_DATA_PTR; @@ -45,6 +47,7 @@ DECLARE_GLOBAL_DATA_PTR; #define RGMII_PHY_RST_SET 0x02000000 #define USB_RST_CLR 0x04000000 +#define USB2_PORT_OUT_EN 0x01000000 #define GPIO_DIR 0x060f0000 @@ -54,38 +57,25 @@ DECLARE_GLOBAL_DATA_PTR; #define SYSCLK_MASK 0x00200000 #define BOARDREV_MASK 0x10100000 -#define BOARDREV_B 0x10100000 #define BOARDREV_C 0x00100000 #define BOARDREV_D 0x00000000 #define SYSCLK_66 66666666 -#define SYSCLK_50 50000000 #define SYSCLK_100 100000000 unsigned long get_board_sys_clk(ulong dummy) { volatile ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR); - u32 val_gpdat, sysclk_gpio, board_rev_gpio; + u32 val_gpdat, sysclk_gpio; val_gpdat = in_be32(&pgpio->gpdat); sysclk_gpio = val_gpdat & SYSCLK_MASK; - board_rev_gpio = val_gpdat & BOARDREV_MASK; - if (board_rev_gpio == BOARDREV_C) { - if(sysclk_gpio == 0) - return SYSCLK_66; - else - return SYSCLK_100; - } else if (board_rev_gpio == BOARDREV_B) { - if(sysclk_gpio == 0) - return SYSCLK_66; - else - return SYSCLK_50; - } else if (board_rev_gpio == BOARDREV_D) { - if(sysclk_gpio == 0) - return SYSCLK_66; - else - return SYSCLK_100; - } + + if(sysclk_gpio == 0) + return SYSCLK_66; + else + return SYSCLK_100; + return 0; } @@ -112,8 +102,6 @@ int checkboard (void) board_rev_gpio = val_gpdat & BOARDREV_MASK; if (board_rev_gpio == BOARDREV_C) board_rev = 'C'; - else if (board_rev_gpio == BOARDREV_B) - board_rev = 'B'; else if (board_rev_gpio == BOARDREV_D) board_rev = 'D'; else @@ -121,6 +109,9 @@ int checkboard (void) cpu = gd->cpu; printf ("Board: %sRDB Rev%c\n", cpu->name, board_rev); +#ifdef CONFIG_PHYS_64BIT + puts ("(36-bit addrmap) \n"); +#endif setbits_be32(&pgpio->gpdir, GPIO_DIR); /* @@ -138,10 +129,47 @@ int checkboard (void) return 0; } +int misc_init_r(void) +{ +#if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH) + ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; + ccsr_gpio_t *gpio = (void *)CONFIG_SYS_MPC85xx_GPIO_ADDR; + + setbits_be32(&gpio->gpdir, USB2_PORT_OUT_EN); + setbits_be32(&gpio->gpdat, USB2_PORT_OUT_EN); + setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_ELBC_OFF_USB2_ON); +#endif + return 0; +} + int board_early_init_r(void) { const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; const u8 flash_esel = find_tlb_idx((void *)flashbase, 1); + volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + unsigned int orig_bus = i2c_get_bus_num(); + u8 i2c_data; + + i2c_set_bus_num(1); + if (i2c_read(CONFIG_SYS_I2C_PCA9557_ADDR, 0, + 1, &i2c_data, sizeof(i2c_data)) == 0) { + if (i2c_data & 0x2) + puts("NOR Flash Bank : Secondary\n"); + else + puts("NOR Flash Bank : Primary\n"); + + if (i2c_data & 0x1) { + setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_SD_DATA); + puts("SD/MMC : 8-bit Mode\n"); + puts("eSPI : Disabled\n"); + } else { + puts("SD/MMC : 4-bit Mode\n"); + puts("eSPI : Enabled\n"); + } + } else { + puts("Failed reading I2C Chip 0x18 on bus 1\n"); + } + i2c_set_bus_num(orig_bus); /* * Remap Boot flash region to caching-inhibited @@ -166,6 +194,7 @@ int board_early_init_r(void) #ifdef CONFIG_TSEC_ENET int board_eth_init(bd_t *bis) { + struct fsl_pq_mdio_info mdio_info; struct tsec_info_struct tsec_info[4]; int num = 0; char *tmp; @@ -203,6 +232,10 @@ int board_eth_init(bd_t *bis) puts("No address specified for VSC7385 microcode.\n"); #endif + mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR; + mdio_info.name = DEFAULT_MII_NAME; + fsl_pq_mdio_init(bis, &mdio_info); + tsec_eth_init(bis, tsec_info, num); return pci_eth_init(bis); @@ -229,12 +262,3 @@ void ft_board_setup(void *blob, bd_t *bd) fdt_fixup_memory(blob, (u64)base, (u64)size); } #endif - -#ifdef CONFIG_MP -extern void cpu_mp_lmb_reserve(struct lmb *lmb); - -void board_lmb_reserve(struct lmb *lmb) -{ - cpu_mp_lmb_reserve(lmb); -} -#endif diff --git a/board/freescale/p1_p2_rdb/tlb.c b/board/freescale/p1_p2_rdb/tlb.c index a46b1b5..1847935 100644 --- a/board/freescale/p1_p2_rdb/tlb.c +++ b/board/freescale/p1_p2_rdb/tlb.c @@ -25,19 +25,20 @@ struct fsl_e_tlb_entry tlb_table[] = { /* TLB 0 - for temp stack in cache */ - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR, + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, + CONFIG_SYS_INIT_RAM_ADDR_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , - CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, + CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , - CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, + CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , - CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, + CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), @@ -80,15 +81,10 @@ struct fsl_e_tlb_entry tlb_table[] = { MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 6, BOOKE_PAGESZ_1M, 1), -#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L2_ADDR) - /* *I*G - L2SRAM */ - SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR, CONFIG_SYS_INIT_L2_ADDR_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 7, BOOKE_PAGESZ_256K, 1), - SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR + 0x40000, - CONFIG_SYS_INIT_L2_ADDR_PHYS + 0x40000, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 8, BOOKE_PAGESZ_256K, 1), +#if defined(CONFIG_SYS_RAMBOOT) + SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 7, BOOKE_PAGESZ_1G, 1) #endif }; diff --git a/board/freescale/p2020ds/ddr.c b/board/freescale/p2020ds/ddr.c index 9a1b075..9bf7d2f 100644 --- a/board/freescale/p2020ds/ddr.c +++ b/board/freescale/p2020ds/ddr.c @@ -7,34 +7,10 @@ */ #include <common.h> -#include <i2c.h> #include <asm/fsl_ddr_sdram.h> #include <asm/fsl_ddr_dimm_params.h> -static void get_spd(generic_spd_eeprom_t *spd, unsigned char i2c_address) -{ - i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr3_spd_eeprom_t)); -} - -unsigned int fsl_ddr_get_mem_data_rate(void) -{ - return get_ddr_freq(0); -} - -void fsl_ddr_get_spd(generic_spd_eeprom_t *ctrl_dimms_spd, - unsigned int ctrl_num) -{ - unsigned int i; - unsigned int i2c_address = 0; - - for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) { - if (ctrl_num == 0 && i == 0) - i2c_address = SPD_EEPROM_ADDRESS1; - get_spd(&(ctrl_dimms_spd[i]), i2c_address); - } -} - typedef struct { u32 datarate_mhz_low; u32 datarate_mhz_high; diff --git a/board/freescale/p2020ds/p2020ds.c b/board/freescale/p2020ds/p2020ds.c index 8546aa9..d3af6cf 100644 --- a/board/freescale/p2020ds/p2020ds.c +++ b/board/freescale/p2020ds/p2020ds.c @@ -1,5 +1,5 @@ /* - * Copyright 2007-2010 Freescale Semiconductor, Inc. + * Copyright 2007-2011 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -34,9 +34,9 @@ #include <miiphy.h> #include <libfdt.h> #include <fdt_support.h> +#include <fsl_mdio.h> #include <tsec.h> #include <asm/fsl_law.h> -#include <asm/mp.h> #include <netdev.h> #include "../common/ngpixis.h" @@ -44,6 +44,19 @@ DECLARE_GLOBAL_DATA_PTR; +int board_early_init_f(void) +{ +#ifdef CONFIG_MMC + ccsr_gur_t *gur = (ccsr_gur_t *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + + setbits_be32(&gur->pmuxcr, + (MPC85xx_PMUXCR_SDHC_CD | + MPC85xx_PMUXCR_SDHC_WP)); +#endif + + return 0; +} + int checkboard(void) { u8 sw; @@ -189,6 +202,7 @@ int board_early_init_r(void) #ifdef CONFIG_TSEC_ENET int board_eth_init(bd_t *bis) { + struct fsl_pq_mdio_info mdio_info; struct tsec_info_struct tsec_info[4]; int num = 0; @@ -223,6 +237,11 @@ int board_eth_init(bd_t *bis) fsl_sgmii_riser_init(tsec_info, num); #endif + mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR; + mdio_info.name = DEFAULT_MII_NAME; + + fsl_pq_mdio_init(bis, &mdio_info); + tsec_eth_init(bis, tsec_info, num); return pci_eth_init(bis); @@ -249,10 +268,3 @@ void ft_board_setup(void *blob, bd_t *bd) #endif } #endif - -#ifdef CONFIG_MP -void board_lmb_reserve(struct lmb *lmb) -{ - cpu_mp_lmb_reserve(lmb); -} -#endif diff --git a/board/freescale/p2020ds/tlb.c b/board/freescale/p2020ds/tlb.c index 824b3b2..fd914a1 100644 --- a/board/freescale/p2020ds/tlb.c +++ b/board/freescale/p2020ds/tlb.c @@ -1,5 +1,5 @@ /* - * Copyright 2008-2009 Freescale Semiconductor, Inc. + * Copyright 2008-2011 Freescale Semiconductor, Inc. * * (C) Copyright 2000 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -90,6 +90,17 @@ struct fsl_e_tlb_entry tlb_table[] = { SET_TLB_ENTRY(1, PIXIS_BASE, PIXIS_BASE_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 8, BOOKE_PAGESZ_4K, 1), + +#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L2_ADDR) + /* *I*G - L2SRAM */ + SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR, CONFIG_SYS_INIT_L2_ADDR_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 9, BOOKE_PAGESZ_256K, 1), + SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR + 0x40000, + CONFIG_SYS_INIT_L2_ADDR_PHYS + 0x40000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 10, BOOKE_PAGESZ_256K, 1), +#endif }; int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/board/gdsys/405ep/405ep.c b/board/gdsys/405ep/405ep.c index 86a3ec8..8b80533 100644 --- a/board/gdsys/405ep/405ep.c +++ b/board/gdsys/405ep/405ep.c @@ -110,6 +110,11 @@ int board_early_init_f(void) for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k) { ihs_fpga_t *fpga = (ihs_fpga_t *) CONFIG_SYS_FPGA_BASE(k); +#ifdef CONFIG_SYS_FPGA_NO_RFL_HI + u16 *reflection_target = &fpga->reflection_low; +#else + u16 *reflection_target = &fpga->reflection_high; +#endif /* * wait for fpga out of reset */ @@ -117,9 +122,11 @@ int board_early_init_f(void) while (1) { out_le16(&fpga->reflection_low, REFLECTION_TESTPATTERN); - if (in_le16(&fpga->reflection_high) == + + if (in_le16(reflection_target) == REFLECTION_TESTPATTERN_INV) break; + udelay(100000); if (ctr++ > 5) { gd->fpga_state[k] |= diff --git a/board/gdsys/405ep/dlvision-10g.c b/board/gdsys/405ep/dlvision-10g.c index df7fb14..0388541 100644 --- a/board/gdsys/405ep/dlvision-10g.c +++ b/board/gdsys/405ep/dlvision-10g.c @@ -31,6 +31,11 @@ #include "../common/osd.h" +#define LATCH2_BASE (CONFIG_SYS_LATCH_BASE + 0x200) +#define LATCH2_MC2_PRESENT_N 0x0080 + +#define LATCH3_BASE (CONFIG_SYS_LATCH_BASE + 0x300) + enum { UNITTYPE_VIDEO_USER = 0, UNITTYPE_MAIN_USER = 1, @@ -60,6 +65,20 @@ enum { RAM_DDR2_64 = 2, }; +static unsigned int get_hwver(void) +{ + u16 latch3 = in_le16((void *)LATCH3_BASE); + + return latch3 & 0x0003; +} + +static unsigned int get_mc2_present(void) +{ + u16 latch2 = in_le16((void *)LATCH2_BASE); + + return !(latch2 & LATCH2_MC2_PRESENT_N); +} + static void print_fpga_info(unsigned dev) { ihs_fpga_t *fpga = (ihs_fpga_t *) CONFIG_SYS_FPGA_BASE(dev); @@ -206,7 +225,6 @@ static void print_fpga_info(unsigned dev) */ int checkboard(void) { - unsigned k; char *s = getenv("serial#"); printf("Board: "); @@ -220,20 +238,27 @@ int checkboard(void) puts("\n"); - for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k) - print_fpga_info(k); + print_fpga_info(0); + if (get_mc2_present()) + print_fpga_info(1); return 0; } int last_stage_init(void) { - unsigned k; + ihs_fpga_t *fpga = (ihs_fpga_t *) CONFIG_SYS_FPGA_BASE(0); + u16 versions = in_le16(&fpga->versions); + + if (((versions >> 4) & 0x000f) != UNITTYPE_MAIN_USER) + return 0; + + if (!get_fpga_state(0) || (get_hwver() == HWVER_101)) + osd_probe(0); - for (k = 0; k < CONFIG_SYS_OSD_SCREENS; ++k) - if (!get_fpga_state(k) - || (get_fpga_state(k) == FPGA_STATE_DONE_FAILED)) - osd_probe(k); + if (get_mc2_present() && + (!get_fpga_state(1) || (get_hwver() == HWVER_101))) + osd_probe(1); return 0; } diff --git a/board/gdsys/common/osd.c b/board/gdsys/common/osd.c index 4d8c046..5065f9d 100644 --- a/board/gdsys/common/osd.c +++ b/board/gdsys/common/osd.c @@ -30,7 +30,12 @@ #define CH7301_I2C_ADDR 0x75 #define ICS8N3QV01_I2C_ADDR 0x6E -#define ICS8N3QV01_FREF 114285 +#define ICS8N3QV01_FREF 114285000 +#define ICS8N3QV01_FREF_LL 114285000LL +#define ICS8N3QV01_F_DEFAULT_0 156250000LL +#define ICS8N3QV01_F_DEFAULT_1 125000000LL +#define ICS8N3QV01_F_DEFAULT_2 100000000LL +#define ICS8N3QV01_F_DEFAULT_3 25175000LL #define SIL1178_MASTER_I2C_ADDRESS 0x38 #define SIL1178_SLAVE_I2C_ADDRESS 0x39 @@ -150,6 +155,41 @@ static void mpc92469ac_set(unsigned screen, unsigned int fout) #endif #ifdef CONFIG_SYS_ICS8N3QV01 + +static unsigned int ics8n3qv01_get_fout_calc(unsigned screen, unsigned index) +{ + unsigned long long n; + unsigned long long mint; + unsigned long long mfrac; + u8 reg_a, reg_b, reg_c, reg_d, reg_f; + unsigned long long fout_calc; + + if (index > 3) + return 0; + + reg_a = fpga_iic_read(screen, ICS8N3QV01_I2C_ADDR, 0 + index); + reg_b = fpga_iic_read(screen, ICS8N3QV01_I2C_ADDR, 4 + index); + reg_c = fpga_iic_read(screen, ICS8N3QV01_I2C_ADDR, 8 + index); + reg_d = fpga_iic_read(screen, ICS8N3QV01_I2C_ADDR, 12 + index); + reg_f = fpga_iic_read(screen, ICS8N3QV01_I2C_ADDR, 20 + index); + + mint = ((reg_a >> 1) & 0x1f) | (reg_f & 0x20); + mfrac = ((reg_a & 0x01) << 17) | (reg_b << 9) | (reg_c << 1) + | (reg_d >> 7); + n = reg_d & 0x7f; + + fout_calc = (mint * ICS8N3QV01_FREF_LL + + mfrac * ICS8N3QV01_FREF_LL / 262144LL + + ICS8N3QV01_FREF_LL / 524288LL + + n / 2) + / n + * 1000000 + / (1000000 - 100); + + return fout_calc; +} + + static void ics8n3qv01_calc_parameters(unsigned int fout, unsigned int *_mint, unsigned int *_mfrac, unsigned int *_n) @@ -160,7 +200,7 @@ static void ics8n3qv01_calc_parameters(unsigned int fout, unsigned int mint; unsigned long long mfrac; - n = 2550000000U / fout; + n = (2215000000U + fout / 2) / fout; if ((n & 1) && (n > 5)) n -= 1; @@ -184,9 +224,18 @@ static void ics8n3qv01_set(unsigned screen, unsigned int fout) unsigned int n; unsigned int mint; unsigned int mfrac; + unsigned int fout_calc; + unsigned long long fout_prog; + long long off_ppm; u8 reg0, reg4, reg8, reg12, reg18, reg20; - ics8n3qv01_calc_parameters(fout, &mint, &mfrac, &n); + fout_calc = ics8n3qv01_get_fout_calc(screen, 1); + off_ppm = (fout_calc - ICS8N3QV01_F_DEFAULT_1) * 1000000 + / ICS8N3QV01_F_DEFAULT_1; + printf(" PLL is off by %lld ppm\n", off_ppm); + fout_prog = (unsigned long long)fout * (unsigned long long)fout_calc + / ICS8N3QV01_F_DEFAULT_1; + ics8n3qv01_calc_parameters(fout_prog, &mint, &mfrac, &n); reg0 = fpga_iic_read(screen, ICS8N3QV01_I2C_ADDR, 0) & 0xc0; reg0 |= (mint & 0x1f) << 1; @@ -327,6 +376,8 @@ int osd_probe(unsigned screen) out_le16(&osd->control, 0x0049); out_le16(&osd->xy_size, ((32 - 1) << 8) | (16 - 1)); + out_le16(&osd->x_pos, 0x007f); + out_le16(&osd->y_pos, 0x005f); return 0; } diff --git a/board/gen860t/u-boot.lds b/board/gen860t/u-boot.lds index 8e854db..be99b51 100644 --- a/board/gen860t/u-boot.lds +++ b/board/gen860t/u-boot.lds @@ -52,13 +52,14 @@ SECTIONS PROVIDE (erotext = .); .reloc : { - KEEP(*(.got)) _GOT2_TABLE_ = .; KEEP(*(.got2)) + KEEP(*(.got)) + PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); _FIXUP_TABLE_ = .; KEEP(*(.fixup)) } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; __fixup_entries = (. - _FIXUP_TABLE_)>>2; .data : diff --git a/board/genietv/u-boot.lds b/board/genietv/u-boot.lds index 3e396e4..1d66a9b 100644 --- a/board/genietv/u-boot.lds +++ b/board/genietv/u-boot.lds @@ -61,13 +61,14 @@ SECTIONS PROVIDE (erotext = .); .reloc : { - KEEP(*(.got)) _GOT2_TABLE_ = .; KEEP(*(.got2)) + KEEP(*(.got)) + PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); _FIXUP_TABLE_ = .; KEEP(*(.fixup)) } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; __fixup_entries = (. - _FIXUP_TABLE_)>>2; .data : diff --git a/board/hermes/u-boot.lds b/board/hermes/u-boot.lds index d50c586..ca97115 100644 --- a/board/hermes/u-boot.lds +++ b/board/hermes/u-boot.lds @@ -53,13 +53,14 @@ SECTIONS PROVIDE (erotext = .); .reloc : { - KEEP(*(.got)) _GOT2_TABLE_ = .; KEEP(*(.got2)) + KEEP(*(.got)) + PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); _FIXUP_TABLE_ = .; KEEP(*(.fixup)) } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; __fixup_entries = (. - _FIXUP_TABLE_)>>2; .data : diff --git a/board/hymod/config.mk b/board/hymod/config.mk index ae766bc..ea64004 100644 --- a/board/hymod/config.mk +++ b/board/hymod/config.mk @@ -28,5 +28,3 @@ PLATFORM_CPPFLAGS += -I$(TOPDIR) OBJCFLAGS = --remove-section=.ppcenv - -LDSCRIPT := $(SRCTREE)/board/hymod/u-boot.lds diff --git a/board/hymod/u-boot.lds b/board/hymod/u-boot.lds index 1592f4f..1efa8b3 100644 --- a/board/hymod/u-boot.lds +++ b/board/hymod/u-boot.lds @@ -93,7 +93,7 @@ SECTIONS _FIXUP_TABLE_ = .; *(.fixup) } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; __fixup_entries = (. - _FIXUP_TABLE_)>>2; .data : diff --git a/board/ibf-dsp561/config.mk b/board/ibf-dsp561/config.mk index 80b527c..afa7141 100644 --- a/board/ibf-dsp561/config.mk +++ b/board/ibf-dsp561/config.mk @@ -23,11 +23,5 @@ # MA 02111-1307 USA # -# This is not actually used for Blackfin boards so do not change it -#CONFIG_SYS_TEXT_BASE = do-not-use-me - -CONFIG_BFIN_CPU = bf561-0.5 - # Set some default LDR flags based on boot mode. LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 -LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE)) diff --git a/board/icu862/u-boot.lds b/board/icu862/u-boot.lds index cb5afc1..93c79a6 100644 --- a/board/icu862/u-boot.lds +++ b/board/icu862/u-boot.lds @@ -47,13 +47,14 @@ SECTIONS PROVIDE (erotext = .); .reloc : { - KEEP(*(.got)) _GOT2_TABLE_ = .; KEEP(*(.got2)) + KEEP(*(.got)) + PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); _FIXUP_TABLE_ = .; KEEP(*(.fixup)) } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; __fixup_entries = (. - _FIXUP_TABLE_)>>2; .data : diff --git a/board/imx31_phycore/imx31_phycore.c b/board/imx31_phycore/imx31_phycore.c index 3d7b7f7..82daaa3 100644 --- a/board/imx31_phycore/imx31_phycore.c +++ b/board/imx31_phycore/imx31_phycore.c @@ -25,8 +25,8 @@ #include <common.h> #include <s6e63d6.h> #include <netdev.h> -#include <asm/arch/mx31.h> -#include <asm/arch/mx31-regs.h> +#include <asm/arch/clock.h> +#include <asm/arch/imx-regs.h> DECLARE_GLOBAL_DATA_PTR; diff --git a/board/imx31_phycore/lowlevel_init.S b/board/imx31_phycore/lowlevel_init.S index c5d6eb0..c47137d 100644 --- a/board/imx31_phycore/lowlevel_init.S +++ b/board/imx31_phycore/lowlevel_init.S @@ -21,7 +21,7 @@ * MA 02111-1307 USA */ -#include <asm/arch/mx31-regs.h> +#include <asm/arch/imx-regs.h> .macro REG reg, val ldr r2, =\reg diff --git a/board/innokom/innokom.c b/board/innokom/innokom.c index e658c35..22de7e3 100644 --- a/board/innokom/innokom.c +++ b/board/innokom/innokom.c @@ -45,12 +45,7 @@ DECLARE_GLOBAL_DATA_PTR; */ int i2c_init_board(void) { - int i, icr; - - /* disable I2C controller first, otherwhise it thinks we want to */ - /* talk to the slave port... */ - icr = readl(ICR); - writel(readl(ICR) & ~(ICR_SCLE | ICR_IUE), ICR); + int i; /* set gpio pin low _before_ we change direction to output */ writel(GPIO_bit(70), GPCR(70)); @@ -63,8 +58,6 @@ int i2c_init_board(void) udelay(10); } - writel(icr, ICR); - return 0; } diff --git a/board/ip04/config.mk b/board/ip04/config.mk index fc818fb..7c023d1 100644 --- a/board/ip04/config.mk +++ b/board/ip04/config.mk @@ -23,15 +23,9 @@ # MA 02111-1307 USA # -# This is not actually used for Blackfin boards so do not change it -#CONFIG_SYS_TEXT_BASE = do-not-use-me - -CONFIG_BFIN_CPU = bf532-0.5 - CFLAGS_lib += -O2 CFLAGS_lib/lzma += -O2 # Set some default LDR flags based on boot mode. LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8 LDR_FLAGS-BFIN_BOOT_UART := --port g --gpio 6 -LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE)) diff --git a/board/ip860/u-boot.lds b/board/ip860/u-boot.lds index 05cc233..d0b60cf 100644 --- a/board/ip860/u-boot.lds +++ b/board/ip860/u-boot.lds @@ -47,13 +47,14 @@ SECTIONS PROVIDE (erotext = .); .reloc : { - KEEP(*(.got)) _GOT2_TABLE_ = .; KEEP(*(.got2)) + KEEP(*(.got)) + PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); _FIXUP_TABLE_ = .; KEEP(*(.fixup)) } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; __fixup_entries = (. - _FIXUP_TABLE_)>>2; .data : diff --git a/board/ivm/u-boot.lds b/board/ivm/u-boot.lds index ff7012a..1e843eb 100644 --- a/board/ivm/u-boot.lds +++ b/board/ivm/u-boot.lds @@ -47,13 +47,14 @@ SECTIONS PROVIDE (erotext = .); .reloc : { - KEEP(*(.got)) _GOT2_TABLE_ = .; KEEP(*(.got2)) + KEEP(*(.got)) + PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); _FIXUP_TABLE_ = .; KEEP(*(.fixup)) } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; __fixup_entries = (. - _FIXUP_TABLE_)>>2; .data : diff --git a/board/karo/tx25/tx25.c b/board/karo/tx25/tx25.c index dc57d5c..269858c 100644 --- a/board/karo/tx25/tx25.c +++ b/board/karo/tx25/tx25.c @@ -141,9 +141,9 @@ void tx25_fec_init(void) int board_init() { #ifdef CONFIG_MXC_UART - extern void mx25_uart_init_pins(void); + extern void mx25_uart1_init_pins(void); - mx25_uart_init_pins(); + mx25_uart1_init_pins(); #endif /* board id for linux */ gd->bd->bi_arch_number = MACH_TYPE_TX25; diff --git a/board/keymile/common/common.c b/board/keymile/common/common.c index 7b4eefd..4883fe5 100644 --- a/board/keymile/common/common.c +++ b/board/keymile/common/common.c @@ -22,13 +22,14 @@ */ #include <common.h> -#if defined(CONFIG_MGCOGE) +#if defined(CONFIG_MGCOGE) || defined(CONFIG_MGCOGE2NE) #include <mpc8260.h> #endif #include <ioports.h> #include <malloc.h> #include <hush.h> #include <net.h> +#include <netdev.h> #include <asm/io.h> #if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) @@ -39,9 +40,11 @@ #if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) #include <i2c.h> -extern int i2c_soft_read_pin (void); +static void i2c_write_start_seq(void); +static int i2c_make_abort(void); +DECLARE_GLOBAL_DATA_PTR; -int ivm_calc_crc (unsigned char *buf, int len) +int ivm_calc_crc(unsigned char *buf, int len) { const unsigned short crc_tab[16] = { 0x0000, 0xCC01, 0xD801, 0x1400, @@ -71,20 +74,55 @@ int ivm_calc_crc (unsigned char *buf, int len) return crc; } -static int ivm_set_value (char *name, char *value) +/* + * Set Keymile specific environment variables + * Currently only some memory layout variables are calculated here + * ... ------------------------------------------------ + * ... |@rootfsaddr |@pnvramaddr |@varaddr |@reserved |@END_OF_RAM + * ... |<------------------- pram ------------------->| + * ... ------------------------------------------------ + * @END_OF_RAM: denotes the RAM size + * @pnvramaddr: Startadress of pseudo non volatile RAM in hex + * @pram : preserved ram size in k + * @varaddr : startadress for /var mounted into RAM + */ +int set_km_env(void) +{ + uchar buf[32]; + unsigned int pnvramaddr; + unsigned int pram; + unsigned int varaddr; + + pnvramaddr = gd->ram_size - CONFIG_KM_RESERVED_PRAM - CONFIG_KM_PHRAM + - CONFIG_KM_PNVRAM; + sprintf((char *)buf, "0x%x", pnvramaddr); + setenv("pnvramaddr", (char *)buf); + + pram = (CONFIG_KM_RESERVED_PRAM + CONFIG_KM_PHRAM + CONFIG_KM_PNVRAM) / + 0x400; + sprintf((char *)buf, "0x%x", pram); + setenv("pram", (char *)buf); + + varaddr = gd->ram_size - CONFIG_KM_RESERVED_PRAM - CONFIG_KM_PHRAM; + sprintf((char *)buf, "0x%x", varaddr); + setenv("varaddr", (char *)buf); + return 0; +} + +static int ivm_set_value(char *name, char *value) { char tempbuf[256]; if (value != NULL) { - sprintf (tempbuf, "%s=%s", name, value); - return set_local_var (tempbuf, 0); + sprintf(tempbuf, "%s=%s", name, value); + return set_local_var(tempbuf, 0); } else { - unset_local_var (name); + unset_local_var(name); } return 0; } -static int ivm_get_value (unsigned char *buf, int len, char *name, int off, +static int ivm_get_value(unsigned char *buf, int len, char *name, int off, int check) { unsigned short val; @@ -92,21 +130,21 @@ static int ivm_get_value (unsigned char *buf, int len, char *name, int off, if ((buf[off + 0] != buf[off + 2]) && (buf[off + 2] != buf[off + 4])) { - printf ("%s Error corrupted %s\n", __FUNCTION__, name); + printf("%s Error corrupted %s\n", __func__, name); val = -1; } else { val = buf[off + 0] + (buf[off + 1] << 8); if ((val == 0) && (check == 1)) val = -1; } - sprintf ((char *)valbuf, "%x", val); - ivm_set_value (name, (char *)valbuf); + sprintf((char *)valbuf, "%x", val); + ivm_set_value(name, (char *)valbuf); return val; } -#define INVENTORYBLOCKSIZE 0x100 -#define INVENTORYDATAADDRESS 0x21 -#define INVENTORYDATASIZE (INVENTORYBLOCKSIZE - INVENTORYDATAADDRESS - 3) +#define INV_BLOCKSIZE 0x100 +#define INV_DATAADDRESS 0x21 +#define INVENTORYDATASIZE (INV_BLOCKSIZE - INV_DATAADDRESS - 3) #define IVM_POS_SHORT_TEXT 0 #define IVM_POS_MANU_ID 1 @@ -121,19 +159,19 @@ static int ivm_get_value (unsigned char *buf, int len, char *name, int off, #define IVM_POS_HISTORY 10 #define IVM_POS_SYMBOL_ONLY 11 -static char convert_char (char c) +static char convert_char(char c) { return (c < ' ' || c > '~') ? '.' : c; } -static int ivm_findinventorystring (int type, +static int ivm_findinventorystring(int type, unsigned char* const string, unsigned long maxlen, unsigned char *buf) { int xcode = 0; unsigned long cr = 0; - unsigned long addr = INVENTORYDATAADDRESS; + unsigned long addr = INV_DATAADDRESS; unsigned long size = 0; unsigned long nr = type; int stop = 0; /* stop on semicolon */ @@ -157,8 +195,10 @@ static int ivm_findinventorystring (int type, addr++; } - /* the expected number of CR was found until the end of the IVM - * content --> fill string */ + /* + * the expected number of CR was found until the end of the IVM + * content --> fill string + */ if (addr < INVENTORYDATASIZE) { /* Copy the IVM string in the corresponding string */ for (; (buf[addr] != '\r') && @@ -170,64 +210,75 @@ static int ivm_findinventorystring (int type, convert_char (buf[addr])); } - /* copy phase is done: check if everything is ok. If not, + /* + * copy phase is done: check if everything is ok. If not, * the inventory data is most probably corrupted: tell - * the world there is a problem! */ + * the world there is a problem! + */ if (addr == INVENTORYDATASIZE) { xcode = -1; - printf ("Error end of string not found\n"); + printf("Error end of string not found\n"); } else if ((size >= (maxlen - 1)) && (buf[addr] != '\r')) { xcode = -1; - printf ("string too long till next CR\n"); + printf("string too long till next CR\n"); } } else { - /* some CR are missing... - * the inventory data is most probably corrupted */ + /* + * some CR are missing... + * the inventory data is most probably corrupted + */ xcode = -1; - printf ("not enough cr found\n"); + printf("not enough cr found\n"); } return xcode; } #define GET_STRING(name, which, len) \ - if (ivm_findinventorystring (which, valbuf, len, buf) == 0) { \ - ivm_set_value (name, (char *)valbuf); \ + if (ivm_findinventorystring(which, valbuf, len, buf) == 0) { \ + ivm_set_value(name, (char *)valbuf); \ } -static int ivm_check_crc (unsigned char *buf, int block) +static int ivm_check_crc(unsigned char *buf, int block) { unsigned long crc; unsigned long crceeprom; - crc = ivm_calc_crc (buf, CONFIG_SYS_IVM_EEPROM_PAGE_LEN - 2); + crc = ivm_calc_crc(buf, CONFIG_SYS_IVM_EEPROM_PAGE_LEN - 2); crceeprom = (buf[CONFIG_SYS_IVM_EEPROM_PAGE_LEN - 1] + \ buf[CONFIG_SYS_IVM_EEPROM_PAGE_LEN - 2] * 256); if (crc != crceeprom) { if (block == 0) - printf ("Error CRC Block: %d EEprom: calculated: \ + printf("Error CRC Block: %d EEprom: calculated: \ %lx EEprom: %lx\n", block, crc, crceeprom); return -1; } return 0; } -static int ivm_analyze_block2 (unsigned char *buf, int len) +static int ivm_analyze_block2(unsigned char *buf, int len) { unsigned char valbuf[CONFIG_SYS_IVM_EEPROM_PAGE_LEN]; unsigned long count; /* IVM_MacAddress */ - sprintf ((char *)valbuf, "%02X:%02X:%02X:%02X:%02X:%02X", - buf[1], - buf[2], - buf[3], - buf[4], - buf[5], - buf[6]); - ivm_set_value ("IVM_MacAddress", (char *)valbuf); - if (getenv ("ethaddr") == NULL) - setenv ((char *)"ethaddr", (char *)valbuf); + sprintf((char *)valbuf, "%pM", buf); + ivm_set_value("IVM_MacAddress", (char *)valbuf); + /* if an offset is defined, add it */ +#if defined(CONFIG_PIGGY_MAC_ADRESS_OFFSET) + if (CONFIG_PIGGY_MAC_ADRESS_OFFSET > 0) { + unsigned long val = (buf[4] << 16) + (buf[5] << 8) + buf[6]; + + val += CONFIG_PIGGY_MAC_ADRESS_OFFSET; + buf[4] = (val >> 16) & 0xff; + buf[5] = (val >> 8) & 0xff; + buf[6] = val & 0xff; + sprintf((char *)valbuf, "%pM", buf); + } +#endif + if (getenv("ethaddr") == NULL) + setenv((char *)"ethaddr", (char *)valbuf); + /* IVM_MacCount */ count = (buf[10] << 24) + (buf[11] << 16) + @@ -235,48 +286,52 @@ static int ivm_analyze_block2 (unsigned char *buf, int len) buf[13]; if (count == 0xffffffff) count = 1; - sprintf ((char *)valbuf, "%lx", count); - ivm_set_value ("IVM_MacCount", (char *)valbuf); + sprintf((char *)valbuf, "%lx", count); + ivm_set_value("IVM_MacCount", (char *)valbuf); return 0; } -int ivm_analyze_eeprom (unsigned char *buf, int len) +int ivm_analyze_eeprom(unsigned char *buf, int len) { unsigned short val; unsigned char valbuf[CONFIG_SYS_IVM_EEPROM_PAGE_LEN]; unsigned char *tmp; - if (ivm_check_crc (buf, 0) != 0) + if (ivm_check_crc(buf, 0) != 0) return -1; - ivm_get_value (buf, CONFIG_SYS_IVM_EEPROM_PAGE_LEN, "IVM_BoardId", 0, 1); - val = ivm_get_value (buf, CONFIG_SYS_IVM_EEPROM_PAGE_LEN, "IVM_HWKey", 6, 1); + ivm_get_value(buf, CONFIG_SYS_IVM_EEPROM_PAGE_LEN, + "IVM_BoardId", 0, 1); + val = ivm_get_value(buf, CONFIG_SYS_IVM_EEPROM_PAGE_LEN, + "IVM_HWKey", 6, 1); if (val != 0xffff) { - sprintf ((char *)valbuf, "%x", ((val /100) % 10)); - ivm_set_value ("IVM_HWVariant", (char *)valbuf); - sprintf ((char *)valbuf, "%x", (val % 100)); - ivm_set_value ("IVM_HWVersion", (char *)valbuf); + sprintf((char *)valbuf, "%x", ((val / 100) % 10)); + ivm_set_value("IVM_HWVariant", (char *)valbuf); + sprintf((char *)valbuf, "%x", (val % 100)); + ivm_set_value("IVM_HWVersion", (char *)valbuf); } - ivm_get_value (buf, CONFIG_SYS_IVM_EEPROM_PAGE_LEN, "IVM_Functions", 12, 0); + ivm_get_value(buf, CONFIG_SYS_IVM_EEPROM_PAGE_LEN, + "IVM_Functions", 12, 0); GET_STRING("IVM_Symbol", IVM_POS_SYMBOL_ONLY, 8) GET_STRING("IVM_DeviceName", IVM_POS_SHORT_TEXT, 64) tmp = (unsigned char *) getenv("IVM_DeviceName"); if (tmp) { - int len = strlen ((char *)tmp); + int len = strlen((char *)tmp); int i = 0; while (i < len) { if (tmp[i] == ';') { - ivm_set_value ("IVM_ShortText", (char *)&tmp[i + 1]); + ivm_set_value("IVM_ShortText", + (char *)&tmp[i + 1]); break; } i++; } if (i >= len) - ivm_set_value ("IVM_ShortText", NULL); + ivm_set_value("IVM_ShortText", NULL); } else { - ivm_set_value ("IVM_ShortText", NULL); + ivm_set_value("IVM_ShortText", NULL); } GET_STRING("IVM_ManufacturerID", IVM_POS_MANU_ID, 32) GET_STRING("IVM_ManufacturerSerialNumber", IVM_POS_MANU_SERIAL, 20) @@ -288,14 +343,15 @@ int ivm_analyze_eeprom (unsigned char *buf, int len) GET_STRING("IVM_CustomerID", IVM_POS_CUSTOMER_ID, 32) GET_STRING("IVM_CustomerProductID", IVM_POS_CUSTOMER_PROD_ID, 32) - if (ivm_check_crc (&buf[CONFIG_SYS_IVM_EEPROM_PAGE_LEN * 2], 2) != 0) + if (ivm_check_crc(&buf[CONFIG_SYS_IVM_EEPROM_PAGE_LEN * 2], 2) != 0) return 0; - ivm_analyze_block2 (&buf[CONFIG_SYS_IVM_EEPROM_PAGE_LEN * 2], CONFIG_SYS_IVM_EEPROM_PAGE_LEN); + ivm_analyze_block2(&buf[CONFIG_SYS_IVM_EEPROM_PAGE_LEN * 2], + CONFIG_SYS_IVM_EEPROM_PAGE_LEN); return 0; } -int ivm_read_eeprom (void) +int ivm_read_eeprom(void) { #if defined(CONFIG_I2C_MUX) I2C_MUX_DEVICE *dev = NULL; @@ -303,229 +359,259 @@ int ivm_read_eeprom (void) uchar i2c_buffer[CONFIG_SYS_IVM_EEPROM_MAX_LEN]; uchar *buf; unsigned dev_addr = CONFIG_SYS_IVM_EEPROM_ADR; + int ret; #if defined(CONFIG_I2C_MUX) /* First init the Bus, select the Bus */ #if defined(CONFIG_SYS_I2C_IVM_BUS) - dev = i2c_mux_ident_muxstring ((uchar *)CONFIG_SYS_I2C_IVM_BUS); + dev = i2c_mux_ident_muxstring((uchar *)CONFIG_SYS_I2C_IVM_BUS); #else - buf = (unsigned char *) getenv ("EEprom_ivm"); + buf = (unsigned char *) getenv("EEprom_ivm"); if (buf != NULL) - dev = i2c_mux_ident_muxstring (buf); + dev = i2c_mux_ident_muxstring(buf); #endif if (dev == NULL) { - printf ("Error couldnt add Bus for IVM\n"); + printf("Error couldnt add Bus for IVM\n"); return -1; } - i2c_set_bus_num (dev->busid); + i2c_set_bus_num(dev->busid); #endif - buf = (unsigned char *) getenv ("EEprom_ivm_addr"); + buf = (unsigned char *) getenv("EEprom_ivm_addr"); if (buf != NULL) - dev_addr = simple_strtoul ((char *)buf, NULL, 16); + dev_addr = simple_strtoul((char *)buf, NULL, 16); - if (i2c_read(dev_addr, 0, 1, i2c_buffer, CONFIG_SYS_IVM_EEPROM_MAX_LEN) != 0) { + /* add deblocking here */ + i2c_make_abort(); + + ret = i2c_read(dev_addr, 0, 1, i2c_buffer, + CONFIG_SYS_IVM_EEPROM_MAX_LEN); + if (ret != 0) { printf ("Error reading EEprom\n"); return -2; } - return ivm_analyze_eeprom (i2c_buffer, CONFIG_SYS_IVM_EEPROM_MAX_LEN); + return ivm_analyze_eeprom(i2c_buffer, CONFIG_SYS_IVM_EEPROM_MAX_LEN); } #if defined(CONFIG_SYS_I2C_INIT_BOARD) -#define DELAY_ABORT_SEQ 62 +#define DELAY_ABORT_SEQ 62 /* @200kHz 9 clocks = 44us, 62us is ok */ #define DELAY_HALF_PERIOD (500 / (CONFIG_SYS_I2C_SPEED / 1000)) -#if defined(CONFIG_MGCOGE) +#if defined(CONFIG_MGCOGE) || defined(CONFIG_MGCOGE2NE) #define SDA_MASK 0x00010000 #define SCL_MASK 0x00020000 -static void set_pin (int state, unsigned long mask) +static void set_pin(int state, unsigned long mask) { - volatile ioport_t *iop = ioport_addr ((immap_t *)CONFIG_SYS_IMMR, 3); + ioport_t *iop = ioport_addr((immap_t *)CONFIG_SYS_IMMR, 3); if (state) - iop->pdat |= (mask); + setbits_be32(&iop->pdat, mask); else - iop->pdat &= ~(mask); + clrbits_be32(&iop->pdat, mask); - iop->pdir |= (mask); + setbits_be32(&iop->pdir, mask); } -static int get_pin (unsigned long mask) +static int get_pin(unsigned long mask) { - volatile ioport_t *iop = ioport_addr ((immap_t *)CONFIG_SYS_IMMR, 3); + ioport_t *iop = ioport_addr((immap_t *)CONFIG_SYS_IMMR, 3); - iop->pdir &= ~(mask); - return (0 != (iop->pdat & (mask))); + clrbits_be32(&iop->pdir, mask); + return 0 != (in_be32(&iop->pdat) & mask); } -static void set_sda (int state) +static void set_sda(int state) { - set_pin (state, SDA_MASK); + set_pin(state, SDA_MASK); } -static void set_scl (int state) +static void set_scl(int state) { - set_pin (state, SCL_MASK); + set_pin(state, SCL_MASK); } -static int get_sda (void) +static int get_sda(void) { - return get_pin (SDA_MASK); + return get_pin(SDA_MASK); } -static int get_scl (void) +static int get_scl(void) { - return get_pin (SCL_MASK); + return get_pin(SCL_MASK); } #if defined(CONFIG_HARD_I2C) -static void setports (int gpio) +static void setports(int gpio) { - volatile ioport_t *iop = ioport_addr ((immap_t *)CONFIG_SYS_IMMR, 3); + ioport_t *iop = ioport_addr((immap_t *)CONFIG_SYS_IMMR, 3); if (gpio) { - iop->ppar &= ~(SDA_MASK | SCL_MASK); - iop->podr &= ~(SDA_MASK | SCL_MASK); + clrbits_be32(&iop->ppar, (SDA_MASK | SCL_MASK)); + clrbits_be32(&iop->podr, (SDA_MASK | SCL_MASK)); } else { - iop->ppar |= (SDA_MASK | SCL_MASK); - iop->pdir &= ~(SDA_MASK | SCL_MASK); - iop->podr |= (SDA_MASK | SCL_MASK); + setbits_be32(&iop->ppar, (SDA_MASK | SCL_MASK)); + clrbits_be32(&iop->pdir, (SDA_MASK | SCL_MASK)); + setbits_be32(&iop->podr, (SDA_MASK | SCL_MASK)); } } #endif #endif -#if defined(CONFIG_KM8XX) -static void set_sda (int state) -{ - I2C_SDA(state); -} - -static void set_scl (int state) +#if !defined(CONFIG_MPC83xx) +static void i2c_write_start_seq(void) { - I2C_SCL(state); + set_sda(1); + udelay(DELAY_HALF_PERIOD); + set_scl(1); + udelay(DELAY_HALF_PERIOD); + set_sda(0); + udelay(DELAY_HALF_PERIOD); + set_scl(0); + udelay(DELAY_HALF_PERIOD); } -static int get_sda (void) +/* + * I2C is a synchronous protocol and resets of the processor in the middle + * of an access can block the I2C Bus until a powerdown of the full unit is + * done. This function toggles the SCL until the SCL and SCA line are + * released, but max. 16 times, after this a I2C start-sequence is sent. + * This I2C Deblocking mechanism was developed by Keymile in association + * with Anatech and Atmel in 1998. + */ +static int i2c_make_abort(void) { - return I2C_READ; -} -static int get_scl (void) -{ - int val; +#if defined(CONFIG_HARD_I2C) && !defined(MACH_TYPE_KM_KIRKWOOD) + immap_t *immap = (immap_t *)CONFIG_SYS_IMMR ; + i2c8260_t *i2c = (i2c8260_t *)&immap->im_i2c; - *(unsigned short *)(I2C_BASE_DIR) &= ~SCL_CONF; - udelay (1); - val = *(unsigned char *)(I2C_BASE_PORT); + /* + * disable I2C controller first, otherwhise it thinks we want to + * talk to the slave port... + */ + clrbits_8(&i2c->i2c_i2mod, 0x01); - return ((val & SCL_BIT) == SCL_BIT); -} + /* Set the PortPins to GPIO */ + setports(1); #endif -#if !defined(CONFIG_KMETER1) -static void writeStartSeq (void) -{ - set_sda (1); - udelay (DELAY_HALF_PERIOD); - set_scl (1); - udelay (DELAY_HALF_PERIOD); - set_sda (0); - udelay (DELAY_HALF_PERIOD); - set_scl (0); - udelay (DELAY_HALF_PERIOD); -} - -/* I2C is a synchronous protocol and resets of the processor in the middle - of an access can block the I2C Bus until a powerdown of the full unit is - done. This function toggles the SCL until the SCL and SCA line are - released, but max. 16 times, after this a I2C start-sequence is sent. - This I2C Deblocking mechanism was developed by Keymile in association - with Anatech and Atmel in 1998. - */ -static int i2c_make_abort (void) -{ int scl_state = 0; int sda_state = 0; int i = 0; int ret = 0; - if (!get_sda ()) { + if (!get_sda()) { ret = -1; while (i < 16) { i++; - set_scl (0); - udelay (DELAY_ABORT_SEQ); - set_scl (1); - udelay (DELAY_ABORT_SEQ); - scl_state = get_scl (); - sda_state = get_sda (); + set_scl(0); + udelay(DELAY_ABORT_SEQ); + set_scl(1); + udelay(DELAY_ABORT_SEQ); + scl_state = get_scl(); + sda_state = get_sda(); if (scl_state && sda_state) { ret = 0; break; } } } - if (ret == 0) { - for (i =0; i < 5; i++) { - writeStartSeq (); - } - } - get_sda (); + if (ret == 0) + for (i = 0; i < 5; i++) + i2c_write_start_seq(); + + /* respect stop setup time */ + udelay(DELAY_ABORT_SEQ); + set_scl(1); + udelay(DELAY_ABORT_SEQ); + set_sda(1); + get_sda(); + +#if defined(CONFIG_HARD_I2C) + /* Set the PortPins back to use for I2C */ + setports(0); +#endif return ret; } #endif -/** - * i2c_init_board - reset i2c bus. When the board is powercycled during a - * bus transfer it might hang; for details see doc/I2C_Edge_Conditions. - */ -void i2c_init_board(void) +#if defined(CONFIG_MPC83xx) +static void i2c_write_start_seq(void) { -#if defined(CONFIG_KMETER1) struct fsl_i2c *dev; dev = (struct fsl_i2c *) (CONFIG_SYS_IMMR + CONFIG_SYS_I2C_OFFSET); - uchar dummy; + udelay(DELAY_ABORT_SEQ); + out_8(&dev->cr, (I2C_CR_MEN | I2C_CR_MSTA)); + udelay(DELAY_ABORT_SEQ); + out_8(&dev->cr, (I2C_CR_MEN)); +} - out_8 (&dev->cr, (I2C_CR_MSTA)); - out_8 (&dev->cr, (I2C_CR_MEN | I2C_CR_MSTA)); - dummy = in_8(&dev->dr); +static int i2c_make_abort(void) +{ + struct fsl_i2c *dev; + dev = (struct fsl_i2c *) (CONFIG_SYS_IMMR + CONFIG_SYS_I2C_OFFSET); + uchar dummy; + uchar last; + int nbr_read = 0; + int i = 0; + int ret = 0; + + /* wait after each operation to finsh with a delay */ + out_8(&dev->cr, (I2C_CR_MSTA)); + udelay(DELAY_ABORT_SEQ); + out_8(&dev->cr, (I2C_CR_MEN | I2C_CR_MSTA)); + udelay(DELAY_ABORT_SEQ); dummy = in_8(&dev->dr); - if (dummy != 0xff) { - dummy = in_8(&dev->dr); + udelay(DELAY_ABORT_SEQ); + last = in_8(&dev->dr); + nbr_read++; + + /* + * do read until the last bit is 1, but stop if the full eeprom is + * read. + */ + while (((last & 0x01) != 0x01) && + (nbr_read < CONFIG_SYS_IVM_EEPROM_MAX_LEN)) { + udelay(DELAY_ABORT_SEQ); + last = in_8(&dev->dr); + nbr_read++; } - out_8 (&dev->cr, (I2C_CR_MEN)); - out_8 (&dev->cr, 0x00); - out_8 (&dev->cr, (I2C_CR_MEN)); - -#else -#if defined(CONFIG_HARD_I2C) && !defined(CONFIG_MACH_SUEN3) - volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR ; - volatile i2c8260_t *i2c = (i2c8260_t *)&immap->im_i2c; - - /* disable I2C controller first, otherwhise it thinks we want to */ - /* talk to the slave port... */ - i2c->i2c_i2mod &= ~0x01; + if ((last & 0x01) != 0x01) + ret = -2; + if ((last != 0xff) || (nbr_read > 1)) + printf("[INFO] i2c abort after %d bytes (0x%02x)\n", + nbr_read, last); + udelay(DELAY_ABORT_SEQ); + out_8(&dev->cr, (I2C_CR_MEN)); + udelay(DELAY_ABORT_SEQ); + /* clear status reg */ + out_8(&dev->sr, 0); + + for (i = 0; i < 5; i++) + i2c_write_start_seq(); + if (ret != 0) + printf("[ERROR] i2c abort failed after %d bytes (0x%02x)\n", + nbr_read, last); - /* Set the PortPins to GPIO */ - setports (1); + return ret; +} #endif +/** + * i2c_init_board - reset i2c bus. When the board is powercycled during a + * bus transfer it might hang; for details see doc/I2C_Edge_Conditions. + */ +void i2c_init_board(void) +{ /* Now run the AbortSequence() */ - i2c_make_abort (); - -#if defined(CONFIG_HARD_I2C) - /* Set the PortPins back to use for I2C */ - setports (0); -#endif -#endif + i2c_make_abort(); } #endif #endif #if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) -int fdt_set_node_and_value (void *blob, +int fdt_set_node_and_value(void *blob, char *nodename, char *regname, void *var, @@ -534,21 +620,22 @@ int fdt_set_node_and_value (void *blob, int ret = 0; int nodeoffset = 0; - nodeoffset = fdt_path_offset (blob, nodename); + nodeoffset = fdt_path_offset(blob, nodename); if (nodeoffset >= 0) { - ret = fdt_setprop (blob, nodeoffset, regname, var, + ret = fdt_setprop(blob, nodeoffset, regname, var, size); if (ret < 0) printf("ft_blob_update(): cannot set %s/%s " "property err:%s\n", nodename, regname, - fdt_strerror (ret)); + fdt_strerror(ret)); } else { printf("ft_blob_update(): cannot find %s node " - "err:%s\n", nodename, fdt_strerror (nodeoffset)); + "err:%s\n", nodename, fdt_strerror(nodeoffset)); } return ret; } -int fdt_get_node_and_value (void *blob, + +int fdt_get_node_and_value(void *blob, char *nodename, char *propname, void **var) @@ -556,42 +643,45 @@ int fdt_get_node_and_value (void *blob, int len; int nodeoffset = 0; - nodeoffset = fdt_path_offset (blob, nodename); + nodeoffset = fdt_path_offset(blob, nodename); if (nodeoffset >= 0) { - *var = (void *)fdt_getprop (blob, nodeoffset, propname, &len); + *var = (void *)fdt_getprop(blob, nodeoffset, propname, &len); if (len == 0) { /* no value */ - printf ("%s no value\n", __FUNCTION__); + printf("%s no value\n", __func__); return -1; } else if (len > 0) { return len; } else { - printf ("libfdt fdt_getprop(): %s\n", + printf("libfdt fdt_getprop(): %s\n", fdt_strerror(len)); return -2; } } else { - printf("%s: cannot find %s node err:%s\n", __FUNCTION__, - nodename, fdt_strerror (nodeoffset)); + printf("%s: cannot find %s node err:%s\n", __func__, + nodename, fdt_strerror(nodeoffset)); return -3; } } #endif -#if !defined(CONFIG_MACH_SUEN3) -int ethernet_present (void) +#if !defined(MACH_TYPE_KM_KIRKWOOD) +int ethernet_present(void) { - return (in_8((u8 *)CONFIG_SYS_PIGGY_BASE + CONFIG_SYS_SLOT_ID_OFF) & 0x80); + struct km_bec_fpga *base = + (struct km_bec_fpga *)CONFIG_SYS_KMBEC_FPGA_BASE; + + return in_8(&base->bprth) & PIGGY_PRESENT; } #endif -int board_eth_init (bd_t *bis) +int board_eth_init(bd_t *bis) { #ifdef CONFIG_KEYMILE_HDLC_ENET - (void)keymile_hdlc_enet_initialize (bis); + (void)keymile_hdlc_enet_initialize(bis); #endif - if (ethernet_present ()) { - return -1; - } - return 0; + if (ethernet_present()) + return cpu_eth_init(bis); + + return -1; } diff --git a/board/keymile/common/common.h b/board/keymile/common/common.h index a38c727..099de98 100644 --- a/board/keymile/common/common.h +++ b/board/keymile/common/common.h @@ -11,20 +11,55 @@ #ifndef __KEYMILE_COMMON_H #define __KEYMILE_COMMON_H -int ethernet_present (void); -int ivm_read_eeprom (void); +#define WRG_RESET 0x80 +#define H_OPORTS_14 0x40 +#define WRG_LED 0x02 +#define WRL_BOOT 0x01 + +#define H_OPORTS_SCC4_ENA 0x10 +#define H_OPORTS_SCC4_FD_ENA 0x04 +#define H_OPORTS_FCC1_PW_DWN 0x01 + +#define PIGGY_PRESENT 0x80 + +struct km_bec_fpga { + unsigned char id; + unsigned char rev; + unsigned char oprth; + unsigned char oprtl; + unsigned char res1[3]; + unsigned char bprth; + unsigned char bprtl; + unsigned char res2[6]; + unsigned char prst; + unsigned char res3[0xfff0]; + unsigned char pgy_id; + unsigned char pgy_rev; + unsigned char pgy_outputs; + unsigned char pgy_eth; +}; + +#if !defined(CONFIG_PIGGY_MAC_ADRESS_OFFSET) +#define CONFIG_PIGGY_MAC_ADRESS_OFFSET 0 +#endif + +int ethernet_present(void); +int ivm_read_eeprom(void); #ifdef CONFIG_KEYMILE_HDLC_ENET -int keymile_hdlc_enet_initialize (bd_t *bis); +int keymile_hdlc_enet_initialize(bd_t *bis); #endif -int fdt_set_node_and_value (void *blob, +int set_km_env(void); +int fdt_set_node_and_value(void *blob, char *nodename, char *regname, void *var, int size); -int fdt_get_node_and_value (void *blob, +int fdt_get_node_and_value(void *blob, char *nodename, char *propname, void **var); + +int i2c_soft_read_pin(void); #endif /* __KEYMILE_COMMON_H */ diff --git a/board/keymile/kmeter1/Makefile b/board/keymile/km83xx/Makefile index 2fa84f3..2fa84f3 100644 --- a/board/keymile/kmeter1/Makefile +++ b/board/keymile/km83xx/Makefile diff --git a/board/keymile/km83xx/km83xx.c b/board/keymile/km83xx/km83xx.c new file mode 100644 index 0000000..17560c8 --- /dev/null +++ b/board/keymile/km83xx/km83xx.c @@ -0,0 +1,288 @@ +/* + * Copyright (C) 2006 Freescale Semiconductor, Inc. + * Dave Liu <daveliu@freescale.com> + * + * Copyright (C) 2007 Logic Product Development, Inc. + * Peter Barada <peterb@logicpd.com> + * + * Copyright (C) 2007 MontaVista Software, Inc. + * Anton Vorontsov <avorontsov@ru.mvista.com> + * + * (C) Copyright 2008 - 2010 + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +#include <common.h> +#include <ioports.h> +#include <mpc83xx.h> +#include <i2c.h> +#include <miiphy.h> +#include <asm/io.h> +#include <asm/mmu.h> +#include <asm/processor.h> +#include <pci.h> +#include <libfdt.h> + +#include "../common/common.h" + +const qe_iop_conf_t qe_iop_conf_tab[] = { + /* port pin dir open_drain assign */ +#if defined(CONFIG_KMETER1) + /* MDIO */ + {0, 1, 3, 0, 2}, /* MDIO */ + {0, 2, 1, 0, 1}, /* MDC */ + + /* UCC4 - UEC */ + {1, 14, 1, 0, 1}, /* TxD0 */ + {1, 15, 1, 0, 1}, /* TxD1 */ + {1, 20, 2, 0, 1}, /* RxD0 */ + {1, 21, 2, 0, 1}, /* RxD1 */ + {1, 18, 1, 0, 1}, /* TX_EN */ + {1, 26, 2, 0, 1}, /* RX_DV */ + {1, 27, 2, 0, 1}, /* RX_ER */ + {1, 24, 2, 0, 1}, /* COL */ + {1, 25, 2, 0, 1}, /* CRS */ + {2, 15, 2, 0, 1}, /* TX_CLK - CLK16 */ + {2, 16, 2, 0, 1}, /* RX_CLK - CLK17 */ + + /* DUART - UART2 */ + {5, 0, 1, 0, 2}, /* UART2_SOUT */ + {5, 2, 1, 0, 1}, /* UART2_RTS */ + {5, 3, 2, 0, 2}, /* UART2_SIN */ + {5, 1, 2, 0, 3}, /* UART2_CTS */ +#else + /* Local Bus */ + {0, 16, 1, 0, 3}, /* LA00 */ + {0, 17, 1, 0, 3}, /* LA01 */ + {0, 18, 1, 0, 3}, /* LA02 */ + {0, 19, 1, 0, 3}, /* LA03 */ + {0, 20, 1, 0, 3}, /* LA04 */ + {0, 21, 1, 0, 3}, /* LA05 */ + {0, 22, 1, 0, 3}, /* LA06 */ + {0, 23, 1, 0, 3}, /* LA07 */ + {0, 24, 1, 0, 3}, /* LA08 */ + {0, 25, 1, 0, 3}, /* LA09 */ + {0, 26, 1, 0, 3}, /* LA10 */ + {0, 27, 1, 0, 3}, /* LA11 */ + {0, 28, 1, 0, 3}, /* LA12 */ + {0, 29, 1, 0, 3}, /* LA13 */ + {0, 30, 1, 0, 3}, /* LA14 */ + {0, 31, 1, 0, 3}, /* LA15 */ + + /* MDIO */ + {3, 4, 3, 0, 2}, /* MDIO */ + {3, 5, 1, 0, 2}, /* MDC */ + + /* UCC4 - UEC */ + {1, 18, 1, 0, 1}, /* TxD0 */ + {1, 19, 1, 0, 1}, /* TxD1 */ + {1, 22, 2, 0, 1}, /* RxD0 */ + {1, 23, 2, 0, 1}, /* RxD1 */ + {1, 26, 2, 0, 1}, /* RxER */ + {1, 28, 2, 0, 1}, /* Rx_DV */ + {1, 30, 1, 0, 1}, /* TxEN */ + {1, 31, 2, 0, 1}, /* CRS */ + {3, 10, 2, 0, 3}, /* TxCLK->CLK17 */ +#endif + + /* END of table */ + {0, 0, 0, 0, QE_IOP_TAB_END}, +}; + +static int board_init_i2c_busses(void) +{ + I2C_MUX_DEVICE *dev = NULL; + uchar *buf; + + /* Set up the Bus for the DTTs */ + buf = (unsigned char *) getenv("dtt_bus"); + if (buf != NULL) + dev = i2c_mux_ident_muxstring(buf); + if (dev == NULL) { + printf("Error couldn't add Bus for DTT\n"); + printf("please setup dtt_bus to where your\n"); + printf("DTT is found.\n"); + } + return 0; +} + +#if defined(CONFIG_SUVD3) +const uint upma_table[] = { + 0x1ffedc00, 0x0ffcdc80, 0x0ffcdc80, 0x0ffcdc04, /* Words 0 to 3 */ + 0x0ffcdc00, 0xffffcc00, 0xffffcc01, 0xfffffc01, /* Words 4 to 7 */ + 0xfffffc01, 0xfffffc01, 0xfffffc01, 0xfffffc01, /* Words 8 to 11 */ + 0xfffffc01, 0xfffffc01, 0xfffffc01, 0xfffffc01, /* Words 12 to 15 */ + 0xfffffc01, 0xfffffc01, 0xfffffc01, 0xfffffc01, /* Words 16 to 19 */ + 0xfffffc01, 0xfffffc01, 0xfffffc01, 0xfffffc01, /* Words 20 to 23 */ + 0x9cfffc00, 0x00fffc80, 0x00fffc80, 0x00fffc00, /* Words 24 to 27 */ + 0xffffec04, 0xffffec01, 0xfffffc01, 0xfffffc01, /* Words 28 to 31 */ + 0xfffffc01, 0xfffffc01, 0xfffffc01, 0xfffffc01, /* Words 32 to 35 */ + 0xfffffc01, 0xfffffc01, 0xfffffc01, 0xfffffc01, /* Words 36 to 39 */ + 0xfffffc01, 0xfffffc01, 0xfffffc01, 0xfffffc01, /* Words 40 to 43 */ + 0xfffffc01, 0xfffffc01, 0xfffffc01, 0xfffffc01, /* Words 44 to 47 */ + 0xfffffc01, 0xfffffc01, 0xfffffc01, 0xfffffc01, /* Words 48 to 51 */ + 0xfffffc01, 0xfffffc01, 0xfffffc01, 0xfffffc01, /* Words 52 to 55 */ + 0xfffffc01, 0xfffffc01, 0xfffffc01, 0xfffffc01, /* Words 56 to 59 */ + 0xfffffc01, 0xfffffc01, 0xfffffc01, 0xfffffc01 /* Words 60 to 63 */ +}; +#endif + +int board_early_init_r(void) +{ + struct km_bec_fpga *base = + (struct km_bec_fpga *)CONFIG_SYS_KMBEC_FPGA_BASE; +#if defined(CONFIG_SUVD3) + immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; + fsl_lbc_t *lbc = &immap->im_lbc; + u32 *mxmr = &lbc->mamr; +#endif + +#if defined(CONFIG_MPC8360) + unsigned short svid; + /* + * Because of errata in the UCCs, we have to write to the reserved + * registers to slow the clocks down. + */ + svid = SVR_REV(mfspr(SVR)); + switch (svid) { + case 0x0020: + /* + * MPC8360ECE.pdf QE_ENET10 table 4: + * IMMR + 0x14A8[4:5] = 11 (clk delay for UCC 2) + * IMMR + 0x14A8[18:19] = 11 (clk delay for UCC 1) + */ + setbits_be32((void *)(CONFIG_SYS_IMMR + 0x14a8), 0x0c003000); + break; + case 0x0021: + /* + * MPC8360ECE.pdf QE_ENET10 table 4: + * IMMR + 0x14AC[24:27] = 1010 + */ + clrsetbits_be32((void *)(CONFIG_SYS_IMMR + 0x14ac), + 0x00000050, 0x000000a0); + break; + } +#endif + + /* enable the PHY on the PIGGY */ + setbits_8(&base->pgy_eth, 0x01); + /* enable the Unit LED (green) */ + setbits_8(&base->oprth, WRL_BOOT); + +#if defined(CONFIG_SUVD3) + /* configure UPMA for APP1 */ + upmconfig(UPMA, (uint *) upma_table, + sizeof(upma_table) / sizeof(uint)); + out_be32(mxmr, CONFIG_SYS_MAMR); +#endif + return 0; +} + +int misc_init_r(void) +{ + /* add board specific i2c busses */ + board_init_i2c_busses(); + return 0; +} + +int last_stage_init(void) +{ + set_km_env(); + return 0; +} + +int fixed_sdram(void) +{ + immap_t *im = (immap_t *)CONFIG_SYS_IMMR; + u32 msize = 0; + u32 ddr_size; + u32 ddr_size_log2; + + out_be32(&im->sysconf.ddrlaw[0].ar, (LAWAR_EN | 0x1e)); + out_be32(&im->ddr.csbnds[0].csbnds, CONFIG_SYS_DDR_CS0_BNDS); + out_be32(&im->ddr.cs_config[0], CONFIG_SYS_DDR_CS0_CONFIG); + out_be32(&im->ddr.timing_cfg_0, CONFIG_SYS_DDR_TIMING_0); + out_be32(&im->ddr.timing_cfg_1, CONFIG_SYS_DDR_TIMING_1); + out_be32(&im->ddr.timing_cfg_2, CONFIG_SYS_DDR_TIMING_2); + out_be32(&im->ddr.timing_cfg_3, CONFIG_SYS_DDR_TIMING_3); + out_be32(&im->ddr.sdram_cfg, CONFIG_SYS_DDR_SDRAM_CFG); + out_be32(&im->ddr.sdram_cfg2, CONFIG_SYS_DDR_SDRAM_CFG2); + out_be32(&im->ddr.sdram_mode, CONFIG_SYS_DDR_MODE); + out_be32(&im->ddr.sdram_mode2, CONFIG_SYS_DDR_MODE2); + out_be32(&im->ddr.sdram_interval, CONFIG_SYS_DDR_INTERVAL); + out_be32(&im->ddr.sdram_clk_cntl, CONFIG_SYS_DDR_CLK_CNTL); + udelay(200); + out_be32(&im->ddr.sdram_cfg, SDRAM_CFG_MEM_EN); + + msize = CONFIG_SYS_DDR_SIZE << 20; + disable_addr_trans(); + msize = get_ram_size(CONFIG_SYS_DDR_BASE, msize); + enable_addr_trans(); + msize /= (1024 * 1024); + if (CONFIG_SYS_DDR_SIZE != msize) { + for (ddr_size = msize << 20, ddr_size_log2 = 0; + (ddr_size > 1); + ddr_size = ddr_size >> 1, ddr_size_log2++) + if (ddr_size & 1) + return -1; + out_be32(&im->sysconf.ddrlaw[0].ar, + (LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE))); + out_be32(&im->ddr.csbnds[0].csbnds, + (((msize / 16) - 1) & 0xff)); + } + + return msize; +} + +phys_size_t initdram(int board_type) +{ + immap_t *im = (immap_t *)CONFIG_SYS_IMMR; + u32 msize = 0; + + if ((in_be32(&im->sysconf.immrbar) & IMMRBAR_BASE_ADDR) != (u32)im) + return -1; + + out_be32(&im->sysconf.ddrlaw[0].bar, + CONFIG_SYS_DDR_BASE & LAWBAR_BAR); + msize = fixed_sdram(); + +#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) + /* + * Initialize DDR ECC byte + */ + ddr_enable_ecc(msize * 1024 * 1024); +#endif + + /* return total bus SDRAM size(bytes) -- DDR */ + return msize * 1024 * 1024; +} + +int checkboard(void) +{ + puts("Board: Keymile " CONFIG_KM_BOARD_NAME); + + if (ethernet_present()) + puts(" with PIGGY."); + puts("\n"); + return 0; +} + +#if defined(CONFIG_OF_BOARD_SETUP) +void ft_board_setup(void *blob, bd_t *bd) +{ + ft_cpu_setup(blob, bd); +} +#endif + +#if defined(CONFIG_HUSH_INIT_VAR) +int hush_init_var(void) +{ + ivm_read_eeprom(); + return 0; +} +#endif diff --git a/board/keymile/km_arm/km_arm.c b/board/keymile/km_arm/km_arm.c index 2e20644..c772ee2 100644 --- a/board/keymile/km_arm/km_arm.c +++ b/board/keymile/km_arm/km_arm.c @@ -41,9 +41,6 @@ DECLARE_GLOBAL_DATA_PTR; -static int io_dev; -extern I2C_MUX_DEVICE *i2c_mux_ident_muxstring (uchar *buf); - /* Multi-Purpose Pins Functionality configuration */ u32 kwmpp_config[] = { MPP0_NF_IO2, @@ -96,7 +93,7 @@ u32 kwmpp_config[] = { MPP41_GPIO, /* Piggy3 LED[4] */ MPP42_GPIO, /* Piggy3 LED[5] */ MPP43_GPIO, /* Piggy3 LED[6] */ - MPP44_GPIO, /* Piggy3 LED[7] */ + MPP44_GPIO, /* Piggy3 LED[7], BIST_EN_L */ MPP45_GPIO, /* Piggy3 LED[8] */ MPP46_GPIO, /* Reserved */ MPP47_GPIO, /* Reserved */ @@ -111,24 +108,48 @@ int ethernet_present(void) int ret = 0; if (i2c_read(0x10, 2, 1, &buf, 1) != 0) { - printf ("%s: Error reading Boco\n", __FUNCTION__); + printf("%s: Error reading Boco\n", __func__); return -1; } - if ((buf & 0x40) == 0x40) { + if ((buf & 0x40) == 0x40) ret = 1; - } + return ret; } +int initialize_unit_leds(void) +{ + /* + * init the unit LEDs + * per default they all are + * ok apart from bootstat + * LED connected through BOCO + * BOCO lies at the address 0x10 + * LEDs are in the block CTRL_H (addr 0x02) + * BOOTSTAT LED is the first 0x01 + */ + #define BOCO 0x10 + #define CTRL_H 0x02 + #define APPLEDMASK 0x01 + uchar buf; + + if (i2c_read(BOCO, CTRL_H, 1, &buf, 1) != 0) { + printf("%s: Error reading Boco\n", __func__); + return -1; + } + buf |= APPLEDMASK; + if (i2c_write(BOCO, CTRL_H, 1, &buf, 1) != 0) { + printf("%s: Error writing Boco\n", __func__); + return -1; + } + return 0; +} + int misc_init_r(void) { - I2C_MUX_DEVICE *i2cdev; char *str; int mach_type; - /* add I2C Bus for I/O Expander */ - i2cdev = i2c_mux_ident_muxstring((uchar *)"pca9554a:70:a"); - io_dev = i2cdev->busid; puts("Piggy:"); if (ethernet_present() == 0) puts (" not"); @@ -140,6 +161,9 @@ int misc_init_r(void) printf("Overwriting MACH_TYPE with %d!!!\n", mach_type); gd->bd->bi_arch_number = mach_type; } + + initialize_unit_leds(); + return 0; } @@ -162,14 +186,14 @@ int board_early_init_f(void) #if defined(CONFIG_SOFT_I2C) /* init the GPIO for I2C Bitbang driver */ - kw_gpio_set_valid(SUEN3_SDA_PIN, 1); - kw_gpio_set_valid(SUEN3_SCL_PIN, 1); - kw_gpio_direction_output(SUEN3_SDA_PIN, 0); - kw_gpio_direction_output(SUEN3_SCL_PIN, 0); + kw_gpio_set_valid(KM_KIRKWOOD_SDA_PIN, 1); + kw_gpio_set_valid(KM_KIRKWOOD_SCL_PIN, 1); + kw_gpio_direction_output(KM_KIRKWOOD_SDA_PIN, 0); + kw_gpio_direction_output(KM_KIRKWOOD_SCL_PIN, 0); #endif #if defined(CONFIG_SYS_EEPROM_WREN) - kw_gpio_set_valid(SUEN3_ENV_WP, 38); - kw_gpio_direction_output(SUEN3_ENV_WP, 1); + kw_gpio_set_valid(KM_KIRKWOOD_ENV_WP, 38); + kw_gpio_direction_output(KM_KIRKWOOD_ENV_WP, 1); #endif return 0; @@ -180,7 +204,7 @@ int board_init(void) /* * arch number of board */ - gd->bd->bi_arch_number = MACH_TYPE_SUEN3; + gd->bd->bi_arch_number = MACH_TYPE_KM_KIRKWOOD; /* address of boot parameters */ gd->bd->bi_boot_params = kw_sdram_bar(0) + 0x100; @@ -188,6 +212,12 @@ int board_init(void) return 0; } +int last_stage_init(void) +{ + set_km_env(); + return 0; +} + #if defined(CONFIG_CMD_SF) int do_spi_toggle(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { @@ -246,7 +276,6 @@ void dram_init_banksize(void) for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) { gd->bd->bi_dram[i].start = kw_sdram_bar(i); - gd->bd->bi_dram[i].size = kw_sdram_bs(i); gd->bd->bi_dram[i].size = get_ram_size((long *)kw_sdram_bar(i), kw_sdram_bs(i)); } @@ -265,15 +294,15 @@ void reset_phy(void) } #if defined(CONFIG_HUSH_INIT_VAR) -int hush_init_var (void) +int hush_init_var(void) { - ivm_read_eeprom (); + ivm_read_eeprom(); return 0; } #endif #if defined(CONFIG_BOOTCOUNT_LIMIT) -void bootcount_store (ulong a) +void bootcount_store(ulong a) { volatile ulong *save_addr; volatile ulong size = 0; @@ -286,7 +315,7 @@ void bootcount_store (ulong a) writel(BOOTCOUNT_MAGIC, &save_addr[1]); } -ulong bootcount_load (void) +ulong bootcount_load(void) { volatile ulong *save_addr; volatile ulong size = 0; @@ -303,34 +332,34 @@ ulong bootcount_load (void) #endif #if defined(CONFIG_SOFT_I2C) -void set_sda (int state) +void set_sda(int state) { I2C_ACTIVE; I2C_SDA(state); } -void set_scl (int state) +void set_scl(int state) { I2C_SCL(state); } -int get_sda (void) +int get_sda(void) { I2C_TRISTATE; return I2C_READ; } -int get_scl (void) +int get_scl(void) { - return (kw_gpio_get_value(SUEN3_SCL_PIN) ? 1 : 0); + return kw_gpio_get_value(KM_KIRKWOOD_SCL_PIN) ? 1 : 0; } #endif #if defined(CONFIG_SYS_EEPROM_WREN) -int eeprom_write_enable (unsigned dev_addr, int state) +int eeprom_write_enable(unsigned dev_addr, int state) { - kw_gpio_set_value(SUEN3_ENV_WP, !state); + kw_gpio_set_value(KM_KIRKWOOD_ENV_WP, !state); - return !kw_gpio_get_value(SUEN3_ENV_WP); + return !kw_gpio_get_value(KM_KIRKWOOD_ENV_WP); } #endif diff --git a/board/keymile/km_arm/kwbimage.cfg b/board/keymile/km_arm/kwbimage.cfg index 26d6aa0..b2f5193 100644 --- a/board/keymile/km_arm/kwbimage.cfg +++ b/board/keymile/km_arm/kwbimage.cfg @@ -27,16 +27,18 @@ # Boot Media configurations BOOT_FROM spi # Boot from SPI flash -DATA 0xFFD10000 0x01111111 # MPP Control 0 Register -# bit 3-0: MPPSel0 1, NF_IO[2] -# bit 7-4: MPPSel1 1, NF_IO[3] -# bit 12-8: MPPSel2 1, NF_IO[4] -# bit 15-12: MPPSel3 1, NF_IO[5] +DATA 0xFFD10000 0x01112222 # MPP Control 0 Register +# bit 3-0: MPPSel0 2, NF_IO[2] +# bit 7-4: MPPSel1 2, NF_IO[3] +# bit 12-8: MPPSel2 2, NF_IO[4] +# bit 15-12: MPPSel3 2, NF_IO[5] # bit 19-16: MPPSel4 1, NF_IO[6] # bit 23-20: MPPSel5 1, NF_IO[7] # bit 27-24: MPPSel6 1, SYSRST_O # bit 31-28: MPPSel7 0, GPO[7] +DATA 0xFFD10004 0x03303300 + DATA 0xFFD10008 0x00001100 # MPP Control 2 Register # bit 3-0: MPPSel16 0, GPIO[16] # bit 7-4: MPPSel17 0, GPIO[17] @@ -48,8 +50,8 @@ DATA 0xFFD10008 0x00001100 # MPP Control 2 Register # bit 31-28: MPPSel23 0, GPIO[23] DATA 0xFFD100E0 0x1B1B1B1B # IO Configuration 0 Register -DATA 0xFFD20134 0xBBBBBBBB # L2 RAM Timing 0 Register -DATA 0xFFD20138 0x00BBBBBB # L2 RAM Timing 1 Register +DATA 0xFFD20134 0x66666666 # L2 RAM Timing 0 Register +DATA 0xFFD20138 0x66666666 # L2 RAM Timing 1 Register DATA 0xFFD20154 0x00000200 # CPU RAM Management Control3 Register DATA 0xFFD2014C 0x00001C00 # CPU RAM Management Control1 Register DATA 0xFFD20148 0x00000001 # CPU RAM Management Control0 Register @@ -63,7 +65,7 @@ DATA 0xFFD01400 0x43000400 # SDRAM Configuration Register # bit29-26: zero # bit31-30: 01 -DATA 0xFFD01404 0x36343000 # DDR Controller Control Low +DATA 0xFFD01404 0x39543000 # DDR Controller Control Low # bit 3-0: 0 reserved # bit 4: 0=addr/cmd in smame cycle # bit 5: 0=clk is driven during self refresh, we don't care for APX @@ -75,7 +77,7 @@ DATA 0xFFD01404 0x36343000 # DDR Controller Control Low # bit30-28: 3 required # bit31: 0=no additional STARTBURST delay -DATA 0xFFD01408 0x2302544B # DDR Timing (Low) (active cycles value +1) +DATA 0xFFD01408 0x34136552 # DDR Timing (Low) (active cycles value +1) # bit3-0: TRAS lsbs # bit7-4: TRCD # bit11- 8: TRP @@ -86,7 +88,7 @@ DATA 0xFFD01408 0x2302544B # DDR Timing (Low) (active cycles value +1) # bit27-24: TRRD # bit31-28: TRTP -DATA 0xFFD0140C 0x00000032 # DDR Timing (High) +DATA 0xFFD0140C 0x00000033 # DDR Timing (High) # bit6-0: TRFC # bit8-7: TR2R # bit10-9: TR2W @@ -116,8 +118,8 @@ DATA 0xFFD01418 0x00000000 # DDR Operation # bit3-0: 0x0, DDR cmd # bit31-4: 0 required -DATA 0xFFD0141C 0x00000642 # DDR Mode -DATA 0xFFD01420 0x00000040 # DDR Extended Mode +DATA 0xFFD0141C 0x00000652 # DDR Mode +DATA 0xFFD01420 0x00000044 # DDR Extended Mode # bit0: 0, DDR DLL enabled # bit1: 0, DDR drive strenght normal # bit2: 1, DDR ODT control lsd disabled @@ -140,6 +142,8 @@ DATA 0xFFD01424 0x0000F07F # DDR Controller Control High # bit11 : 0 , 1/4 clock cycle skew disabled for write mesh # bit15-12: 1111 required # bit31-16: 0 required +DATA 0xFFD01428 0x00074510 +DATA 0xFFD0147c 0x00007451 DATA 0xFFD01500 0x00000000 # CS[0]n Base address to 0x0 DATA 0xFFD01504 0x07FFFFF1 # CS[0]n Size @@ -153,7 +157,7 @@ DATA 0xFFD0150C 0x00000000 # CS[1]n Size, window disabled DATA 0xFFD01514 0x00000000 # CS[2]n Size, window disabled DATA 0xFFD0151C 0x00000000 # CS[3]n Size, window disabled -DATA 0xFFD01494 0x00000000 # DDR ODT Control (Low) +DATA 0xFFD01494 0x00010001 # DDR ODT Control (Low) # bit3-0: 0, ODT0Rd, MODT[0] asserted during read from DRAM CS0 # bit19-16:0, ODT0Wr, MODT[0] asserted during write to DRAM CS0 @@ -162,7 +166,7 @@ DATA 0xFFD01498 0x00000000 # DDR ODT Control (High) # bit3-2: 00, ODT1 controlled by register # bit31-4: zero, required -DATA 0xFFD0149C 0x0000E90F # CPU ODT Control +DATA 0xFFD0149C 0x0000FC11 # CPU ODT Control # bit3-0: F, ODT0Rd, Internal ODT asserted during read from DRAM bank0 # bit7-4: 0, ODT0Wr, Internal ODT asserted during write to DRAM bank0 # bit9-8: 1, ODTEn, never active diff --git a/board/keymile/kmeter1/kmeter1.c b/board/keymile/kmeter1/kmeter1.c deleted file mode 100644 index bbcaf5d..0000000 --- a/board/keymile/kmeter1/kmeter1.c +++ /dev/null @@ -1,217 +0,0 @@ -/* - * Copyright (C) 2006 Freescale Semiconductor, Inc. - * Dave Liu <daveliu@freescale.com> - * - * Copyright (C) 2007 Logic Product Development, Inc. - * Peter Barada <peterb@logicpd.com> - * - * Copyright (C) 2007 MontaVista Software, Inc. - * Anton Vorontsov <avorontsov@ru.mvista.com> - * - * (C) Copyright 2008 - * Heiko Schocher, DENX Software Engineering, hs@denx.de. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - */ - -#include <common.h> -#include <ioports.h> -#include <mpc83xx.h> -#include <i2c.h> -#include <miiphy.h> -#include <asm/io.h> -#include <asm/mmu.h> -#include <asm/processor.h> -#include <pci.h> -#include <libfdt.h> - -#include "../common/common.h" - -extern void disable_addr_trans (void); -extern void enable_addr_trans (void); -const qe_iop_conf_t qe_iop_conf_tab[] = { - /* port pin dir open_drain assign */ - - /* MDIO */ - {0, 1, 3, 0, 2}, /* MDIO */ - {0, 2, 1, 0, 1}, /* MDC */ - - /* UCC4 - UEC */ - {1, 14, 1, 0, 1}, /* TxD0 */ - {1, 15, 1, 0, 1}, /* TxD1 */ - {1, 20, 2, 0, 1}, /* RxD0 */ - {1, 21, 2, 0, 1}, /* RxD1 */ - {1, 18, 1, 0, 1}, /* TX_EN */ - {1, 26, 2, 0, 1}, /* RX_DV */ - {1, 27, 2, 0, 1}, /* RX_ER */ - {1, 24, 2, 0, 1}, /* COL */ - {1, 25, 2, 0, 1}, /* CRS */ - {2, 15, 2, 0, 1}, /* TX_CLK - CLK16 */ - {2, 16, 2, 0, 1}, /* RX_CLK - CLK17 */ - - /* DUART - UART2 */ - {5, 0, 1, 0, 2}, /* UART2_SOUT */ - {5, 2, 1, 0, 1}, /* UART2_RTS */ - {5, 3, 2, 0, 2}, /* UART2_SIN */ - {5, 1, 2, 0, 3}, /* UART2_CTS */ - - /* END of table */ - {0, 0, 0, 0, QE_IOP_TAB_END}, -}; - -static int board_init_i2c_busses (void) -{ - I2C_MUX_DEVICE *dev = NULL; - uchar *buf; - - /* Set up the Bus for the DTTs */ - buf = (unsigned char *) getenv ("dtt_bus"); - if (buf != NULL) - dev = i2c_mux_ident_muxstring (buf); - if (dev == NULL) { - printf ("Error couldn't add Bus for DTT\n"); - printf ("please setup dtt_bus to where your\n"); - printf ("DTT is found.\n"); - } - return 0; -} - -int board_early_init_r (void) -{ - unsigned short svid; - - /* - * Because of errata in the UCCs, we have to write to the reserved - * registers to slow the clocks down. - */ - svid = SVR_REV(mfspr (SVR)); - switch (svid) { - case 0x0020: - setbits_be32((void *)(CONFIG_SYS_IMMR + 0x14a8), 0x0c003000); - break; - case 0x0021: - clrsetbits_be32((void *)(CONFIG_SYS_IMMR + 0x14ac), - 0x00000050, 0x000000a0); - break; - } - /* enable the PHY on the PIGGY */ - setbits (8, (void *)(CONFIG_SYS_PIGGY_BASE + 0x10003), 0x01); - /* enable the Unit LED (green) */ - setbits (8, (void *)(CONFIG_SYS_PIGGY_BASE + 0x00002), 0x01); - /* take FE/GbE PHYs out of reset */ - setbits (8, (void *)(CONFIG_SYS_PIGGY_BASE + 0x0000f), 0x1c); - - return 0; -} - -int misc_init_r (void) -{ - /* add board specific i2c busses */ - board_init_i2c_busses (); - return 0; -} - -int fixed_sdram(void) -{ - volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; - u32 msize = 0; - u32 ddr_size; - u32 ddr_size_log2; - - im->sysconf.ddrlaw[0].ar = LAWAR_EN | 0x1e; - im->ddr.csbnds[0].csbnds = CONFIG_SYS_DDR_CS0_BNDS; - im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG; - im->ddr.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0; - im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1; - im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2; - im->ddr.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3; - im->ddr.sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG; - im->ddr.sdram_cfg2 = CONFIG_SYS_DDR_SDRAM_CFG2; - im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE; - im->ddr.sdram_mode2 = CONFIG_SYS_DDR_MODE2; - im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL; - im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CNTL; - udelay (200); - im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN; - - msize = CONFIG_SYS_DDR_SIZE << 20; - disable_addr_trans (); - msize = get_ram_size (CONFIG_SYS_DDR_BASE, msize); - enable_addr_trans (); - msize /= (1024 * 1024); - if (CONFIG_SYS_DDR_SIZE != msize) { - for (ddr_size = msize << 20, ddr_size_log2 = 0; - (ddr_size > 1); ddr_size = ddr_size >> 1, ddr_size_log2++) - if (ddr_size & 1) - return -1; - im->sysconf.ddrlaw[0].ar = - LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE); - im->ddr.csbnds[0].csbnds = (((msize / 16) - 1) & 0xff); - } - - return msize; -} - -phys_size_t initdram (int board_type) -{ -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) - extern void ddr_enable_ecc (unsigned int dram_size); -#endif - volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; - u32 msize = 0; - - if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im) - return -1; - - /* DDR SDRAM - Main SODIMM */ - im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR; - msize = fixed_sdram (); - -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) - /* - * Initialize DDR ECC byte - */ - ddr_enable_ecc (msize * 1024 * 1024); -#endif - - /* return total bus SDRAM size(bytes) -- DDR */ - return (msize * 1024 * 1024); -} - -int checkboard (void) -{ - puts ("Board: Keymile kmeter1"); - if (ethernet_present ()) - puts (" with PIGGY."); - puts ("\n"); - return 0; -} - -#if defined(CONFIG_OF_BOARD_SETUP) -/* - * update property in the blob - */ -void ft_blob_update (void *blob, bd_t *bd) -{ - /* no board specific update */ -} - - -void ft_board_setup (void *blob, bd_t *bd) -{ - ft_cpu_setup (blob, bd); - ft_blob_update (blob, bd); -} -#endif - -#if defined(CONFIG_HUSH_INIT_VAR) -extern int ivm_read_eeprom (void); -int hush_init_var (void) -{ - ivm_read_eeprom (); - return 0; -} -#endif diff --git a/board/keymile/mgcoge/mgcoge.c b/board/keymile/mgcoge/mgcoge.c index 5c9496c..7b34684 100644 --- a/board/keymile/mgcoge/mgcoge.c +++ b/board/keymile/mgcoge/mgcoge.c @@ -195,33 +195,30 @@ const iop_conf_t iop_conf_tab[4][32] = { } }; -/* Try SDRAM initialization with P/LSDMR=sdmr and ORx=orx +/* + * Try SDRAM initialization with P/LSDMR=sdmr and ORx=orx * * This routine performs standard 8260 initialization sequence * and calculates the available memory size. It may be called * several times to try different SDRAM configurations on both * 60x and local buses. */ -static long int try_init (volatile memctl8260_t * memctl, ulong sdmr, - ulong orx, volatile uchar * base) +static long int try_init(memctl8260_t *memctl, ulong sdmr, + ulong orx, uchar *base) { - volatile uchar c = 0xff; - volatile uint *sdmr_ptr; - volatile uint *orx_ptr; + uchar c = 0xff; ulong maxsize, size; int i; - /* We must be able to test a location outsize the maximum legal size + /* + * We must be able to test a location outsize the maximum legal size * to find out THAT we are outside; but this address still has to be * mapped by the controller. That means, that the initial mapping has * to be (at least) twice as large as the maximum expected size. */ maxsize = (1 + (~orx | 0x7fff))/* / 2*/; - sdmr_ptr = &memctl->memc_psdmr; - orx_ptr = &memctl->memc_or1; - - *orx_ptr = orx; + out_be32(&memctl->memc_or1, orx); /* * Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35): @@ -243,78 +240,107 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr, * get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE. */ - *sdmr_ptr = sdmr | PSDMR_OP_PREA; - *base = c; + out_be32(&memctl->memc_psdmr, sdmr | PSDMR_OP_PREA); + out_8(base, c); - *sdmr_ptr = sdmr | PSDMR_OP_CBRR; + out_be32(&memctl->memc_psdmr, sdmr | PSDMR_OP_CBRR); for (i = 0; i < 8; i++) - *base = c; + out_8(base, c); - *sdmr_ptr = sdmr | PSDMR_OP_MRW; - *(base + CONFIG_SYS_MRS_OFFS) = c; /* setting MR on address lines */ + out_be32(&memctl->memc_psdmr, sdmr | PSDMR_OP_MRW); + /* setting MR on address lines */ + out_8((uchar *)(base + CONFIG_SYS_MRS_OFFS), c); - *sdmr_ptr = sdmr | PSDMR_OP_NORM | PSDMR_RFEN; - *base = c; + out_be32(&memctl->memc_psdmr, sdmr | PSDMR_OP_NORM | PSDMR_RFEN); + out_8(base, c); - size = get_ram_size ((long *)base, maxsize); - *orx_ptr = orx | ~(size - 1); + size = get_ram_size((long *)base, maxsize); + out_be32(&memctl->memc_or1, orx | ~(size - 1)); return (size); } -phys_size_t initdram (int board_type) +phys_size_t initdram(int board_type) { - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8260_t *memctl = &immap->im_memctl; + immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; + memctl8260_t *memctl = &immap->im_memctl; long psize; - memctl->memc_psrt = CONFIG_SYS_PSRT; - memctl->memc_mptpr = CONFIG_SYS_MPTPR; + out_8(&memctl->memc_psrt, CONFIG_SYS_PSRT); + out_be16(&memctl->memc_mptpr, CONFIG_SYS_MPTPR); #ifndef CONFIG_SYS_RAMBOOT /* 60x SDRAM setup: */ - psize = try_init (memctl, CONFIG_SYS_PSDMR, CONFIG_SYS_OR1, - (uchar *) CONFIG_SYS_SDRAM_BASE); + psize = try_init(memctl, CONFIG_SYS_PSDMR, CONFIG_SYS_OR1, + (uchar *) CONFIG_SYS_SDRAM_BASE); #endif /* CONFIG_SYS_RAMBOOT */ - icache_enable (); + icache_enable(); return (psize); } int checkboard(void) { - puts ("Board: Keymile mgcoge"); - if (ethernet_present ()) - puts (" with PIGGY."); - puts ("\n"); +#if defined(CONFIG_MGCOGE) + puts("Board: Keymile mgcoge"); +#else + puts("Board: Keymile mgcoge2ne"); +#endif + if (ethernet_present()) + puts(" with PIGGY."); + puts("\n"); + return 0; +} + +#define DIPSWITCH_OFFSET 0x89 +#define DIPSWITCH_MASK 0x0f + +int last_stage_init(void) +{ + u8 dip_switch; + /* Dip switch */ + dip_switch = readb(CONFIG_SYS_BFTICU_BASE + DIPSWITCH_OFFSET); + dip_switch &= DIPSWITCH_MASK; + /* dip switch 'full reset' or 'db erase' */ + if (dip_switch & 0x1 || dip_switch & 0x2) { + /* start bootloader */ + puts("DIP: Enabled\n"); + setenv("actual_bank", "0"); + } + set_km_env(); return 0; } /* * Early board initalization. */ -int board_early_init_r (void) +int board_early_init_r(void) { + struct km_bec_fpga *base = + (struct km_bec_fpga *)CONFIG_SYS_KMBEC_FPGA_BASE; + /* setup the UPIOx */ /* General Unit Reset disabled, Flash Bank enabled, UnitLed on */ - out_8((u8 *)(CONFIG_SYS_PIGGY_BASE + 0x02), 0xc2); + out_8(&base->oprth, (WRG_RESET | H_OPORTS_14 | WRG_LED)); /* SCC4 enable, halfduplex, FCC1 powerdown */ - out_8((u8 *)(CONFIG_SYS_PIGGY_BASE + 0x03), 0x15); + out_8(&base->oprtl, (H_OPORTS_SCC4_ENA | H_OPORTS_SCC4_FD_ENA | + H_OPORTS_FCC1_PW_DWN)); + return 0; } -int hush_init_var (void) +int hush_init_var(void) { - ivm_read_eeprom (); + ivm_read_eeprom(); return 0; } #if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) -void ft_board_setup (void *blob, bd_t *bd) +void ft_board_setup(void *blob, bd_t *bd) { - ft_cpu_setup (blob, bd); + ft_cpu_setup(blob, bd); } #endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */ diff --git a/board/kup/kup4k/u-boot.lds b/board/kup/kup4k/u-boot.lds index 05cc233..d0b60cf 100644 --- a/board/kup/kup4k/u-boot.lds +++ b/board/kup/kup4k/u-boot.lds @@ -47,13 +47,14 @@ SECTIONS PROVIDE (erotext = .); .reloc : { - KEEP(*(.got)) _GOT2_TABLE_ = .; KEEP(*(.got2)) + KEEP(*(.got)) + PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); _FIXUP_TABLE_ = .; KEEP(*(.fixup)) } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; __fixup_entries = (. - _FIXUP_TABLE_)>>2; .data : diff --git a/board/kup/kup4x/u-boot.lds b/board/kup/kup4x/u-boot.lds index 05cc233..d0b60cf 100644 --- a/board/kup/kup4x/u-boot.lds +++ b/board/kup/kup4x/u-boot.lds @@ -47,13 +47,14 @@ SECTIONS PROVIDE (erotext = .); .reloc : { - KEEP(*(.got)) _GOT2_TABLE_ = .; KEEP(*(.got2)) + KEEP(*(.got)) + PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); _FIXUP_TABLE_ = .; KEEP(*(.fixup)) } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; __fixup_entries = (. - _FIXUP_TABLE_)>>2; .data : diff --git a/board/lantec/u-boot.lds b/board/lantec/u-boot.lds index 25e7a4d..de0b355 100644 --- a/board/lantec/u-boot.lds +++ b/board/lantec/u-boot.lds @@ -56,13 +56,14 @@ SECTIONS PROVIDE (erotext = .); .reloc : { - KEEP(*(.got)) _GOT2_TABLE_ = .; KEEP(*(.got2)) + KEEP(*(.got)) + PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); _FIXUP_TABLE_ = .; KEEP(*(.fixup)) } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; __fixup_entries = (. - _FIXUP_TABLE_)>>2; .data : diff --git a/board/logicpd/imx31_litekit/imx31_litekit.c b/board/logicpd/imx31_litekit/imx31_litekit.c index a07ba0e..2ed742f 100644 --- a/board/logicpd/imx31_litekit/imx31_litekit.c +++ b/board/logicpd/imx31_litekit/imx31_litekit.c @@ -24,8 +24,8 @@ #include <common.h> #include <netdev.h> -#include <asm/arch/mx31.h> -#include <asm/arch/mx31-regs.h> +#include <asm/arch/clock.h> +#include <asm/arch/imx-regs.h> DECLARE_GLOBAL_DATA_PTR; diff --git a/board/logicpd/imx31_litekit/lowlevel_init.S b/board/logicpd/imx31_litekit/lowlevel_init.S index 0003a42..95b0c08 100644 --- a/board/logicpd/imx31_litekit/lowlevel_init.S +++ b/board/logicpd/imx31_litekit/lowlevel_init.S @@ -21,7 +21,7 @@ * MA 02111-1307 USA */ -#include <asm/arch/mx31-regs.h> +#include <asm/arch/imx-regs.h> .macro REG reg, val ldr r2, =\reg diff --git a/board/lwmon/u-boot.lds b/board/lwmon/u-boot.lds index d02db17..8bf7324 100644 --- a/board/lwmon/u-boot.lds +++ b/board/lwmon/u-boot.lds @@ -47,13 +47,14 @@ SECTIONS PROVIDE (erotext = .); .reloc : { - KEEP(*(.got)) _GOT2_TABLE_ = .; KEEP(*(.got2)) + KEEP(*(.got)) + PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); _FIXUP_TABLE_ = .; KEEP(*(.fixup)) } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; __fixup_entries = (. - _FIXUP_TABLE_)>>2; .data : diff --git a/board/manroland/uc100/u-boot.lds b/board/manroland/uc100/u-boot.lds index 344cbde..731cec9 100644 --- a/board/manroland/uc100/u-boot.lds +++ b/board/manroland/uc100/u-boot.lds @@ -50,13 +50,14 @@ SECTIONS PROVIDE (erotext = .); .reloc : { - KEEP(*(.got)) _GOT2_TABLE_ = .; KEEP(*(.got2)) + KEEP(*(.got)) + PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); _FIXUP_TABLE_ = .; KEEP(*(.fixup)) } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; __fixup_entries = (. - _FIXUP_TABLE_)>>2; .data : diff --git a/board/matrix_vision/mvsmr/u-boot.lds b/board/matrix_vision/mvsmr/u-boot.lds index f3d01e7..57c37de 100644 --- a/board/matrix_vision/mvsmr/u-boot.lds +++ b/board/matrix_vision/mvsmr/u-boot.lds @@ -55,13 +55,14 @@ SECTIONS PROVIDE (erotext = .); .reloc : { - KEEP(*(.got)) _GOT2_TABLE_ = .; KEEP(*(.got2)) + KEEP(*(.got)) + PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); _FIXUP_TABLE_ = .; KEEP(*(.fixup)) } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2; + __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; __fixup_entries = (. - _FIXUP_TABLE_) >> 2; .data : diff --git a/board/mbx8xx/u-boot.lds b/board/mbx8xx/u-boot.lds index 05cc233..d0b60cf 100644 --- a/board/mbx8xx/u-boot.lds +++ b/board/mbx8xx/u-boot.lds @@ -47,13 +47,14 @@ SECTIONS PROVIDE (erotext = .); .reloc : { - KEEP(*(.got)) _GOT2_TABLE_ = .; KEEP(*(.got2)) + KEEP(*(.got)) + PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); _FIXUP_TABLE_ = .; KEEP(*(.fixup)) } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; __fixup_entries = (. - _FIXUP_TABLE_)>>2; .data : diff --git a/board/ml2/u-boot.lds b/board/ml2/u-boot.lds index 0f2593d..9f9ddb8 100644 --- a/board/ml2/u-boot.lds +++ b/board/ml2/u-boot.lds @@ -44,13 +44,14 @@ SECTIONS PROVIDE (erotext = .); .reloc : { - KEEP(*(.got)) _GOT2_TABLE_ = .; KEEP(*(.got2)) + KEEP(*(.got)) + PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); _FIXUP_TABLE_ = .; KEEP(*(.fixup)) } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; __fixup_entries = (. - _FIXUP_TABLE_)>>2; .data : diff --git a/board/mousse/u-boot.lds b/board/mousse/u-boot.lds index ef73e2b..dae2cfc 100644 --- a/board/mousse/u-boot.lds +++ b/board/mousse/u-boot.lds @@ -41,13 +41,14 @@ SECTIONS PROVIDE (erotext = .); .reloc : { - KEEP(*(.got)) _GOT2_TABLE_ = .; KEEP(*(.got2)) + KEEP(*(.got)) + PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); _FIXUP_TABLE_ = .; KEEP(*(.fixup)) } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2; + __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; __fixup_entries = (. - _FIXUP_TABLE_) >> 2; .data : diff --git a/board/mp2usb/config.mk b/board/mp2usb/config.mk deleted file mode 100644 index 948e4ff..0000000 --- a/board/mp2usb/config.mk +++ /dev/null @@ -1,3 +0,0 @@ -CONFIG_SYS_TEXT_BASE = 0x27F00000 -## For testing: load at 0x20100000 and "go" at 0x201000A4 -#CONFIG_SYS_TEXT_BASE = 0x20100000 diff --git a/board/mp2usb/flash.c b/board/mp2usb/flash.c deleted file mode 100644 index 21a8ef9..0000000 --- a/board/mp2usb/flash.c +++ /dev/null @@ -1,552 +0,0 @@ -/* - * (C) Copyright 2001 - * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net - * - * (C) Copyright 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * Modified for the MP2USB by (C) Copyright 2005 Eric Benard - * ebenard@eukrea.com - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <linux/byteorder/swab.h> - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define PHYS_FLASH_SECT_SIZE 0x00020000 /* 128 KB sectors (x1) */ - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -#define FLASH_PORT_WIDTH ushort -#define FLASH_PORT_WIDTHV vu_short -#define SWAP(x) __swab16(x) - -#define FPW FLASH_PORT_WIDTH -#define FPWV FLASH_PORT_WIDTHV - -#define mb() __asm__ __volatile__ ("" : : : "memory") - -/* Intel-compatible flash commands */ -#define INTEL_PROGRAM 0x00100010 -#define INTEL_ERASE 0x00200020 -#define INTEL_PROG 0x00400040 -#define INTEL_CLEAR 0x00500050 -#define INTEL_LOCKBIT 0x00600060 -#define INTEL_PROTECT 0x00010001 -#define INTEL_STATUS 0x00700070 -#define INTEL_READID 0x00900090 -#define INTEL_SUSPEND 0x00B000B0 -#define INTEL_CONFIRM 0x00D000D0 -#define INTEL_RESET 0xFFFFFFFF - -/* Intel-compatible flash status bits */ -#define INTEL_FINISHED 0x00800080 -#define INTEL_OK 0x00800080 - -/*----------------------------------------------------------------------- - * Functions - */ -static ulong flash_get_size (FPW *addr, flash_info_t *info); -static int write_data (flash_info_t *info, ulong dest, FPW data); -static void flash_get_offsets (ulong base, flash_info_t *info); -void inline spin_wheel (void); - -/*----------------------------------------------------------------------- - */ - -unsigned long flash_init (void) -{ - int i; - ulong size = 0; - - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { - switch (i) { - case 0: - flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]); - flash_get_offsets (PHYS_FLASH_1, &flash_info[i]); - break; - default: - panic ("configured too many flash banks!\n"); - break; - } - size += flash_info[i].size; - } - - /* Protect monitor and environment sectors - */ - flash_protect ( FLAG_PROTECT_SET, - CONFIG_SYS_FLASH_BASE, - CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1, - &flash_info[0] ); - - flash_protect ( FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0] ); - - return size; -} - -/*----------------------------------------------------------------------- - */ -static void flash_get_offsets (ulong base, flash_info_t *info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - return; - } - - if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) { - for (i = 0; i < info->sector_count; i++) { - info->start[i] = base + (i * PHYS_FLASH_SECT_SIZE); - info->protect[i] = 0; - } - } -} - -/*----------------------------------------------------------------------- - */ -void flash_print_info (flash_info_t *info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_INTEL: - printf ("INTEL "); - break; - default: - printf ("Unknown Vendor "); - break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_28F640J3A: - printf ("28F640J3A\n"); - break; - case FLASH_28F128J3A: - printf ("28F128J3A\n"); - break; - default: - printf ("Unknown Chip Type\n"); - break; - } - - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf (" Sector Start Addresses:"); - for (i = 0; i < info->sector_count; ++i) { - if ((i % 5) == 0) - printf ("\n "); - printf (" %08lX%s", - info->start[i], - info->protect[i] ? " (RO)" : " "); - } - printf ("\n"); - return; -} - -/* - * The following code cannot be run from FLASH! - */ -static ulong flash_get_size (FPW *addr, flash_info_t *info) -{ - volatile FPW value; - - /* Write auto select command: read Manufacturer ID */ - addr[0x5555] = (FPW) 0x00AA00AA; - addr[0x2AAA] = (FPW) 0x00550055; - addr[0x5555] = (FPW) 0x00900090; - - mb (); - value = addr[0]; - - switch (value) { - - case (FPW) INTEL_MANUFACT: - info->flash_id = FLASH_MAN_INTEL; - break; - - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - addr[0] = (FPW) INTEL_RESET; /* restore read mode */ - return (0); /* no or unknown flash */ - } - - mb (); - value = addr[1]; /* device ID */ - - switch (value) { - - case (FPW) INTEL_ID_28F640J3A: - info->flash_id += FLASH_28F640J3A; - info->sector_count = 64; - info->size = 0x00800000; - break; /* => 8 MB */ - - case (FPW) INTEL_ID_28F128J3A: - info->flash_id += FLASH_28F128J3A; - info->sector_count = 128; - info->size = 0x01000000; - break; /* => 16 MB */ - - default: - info->flash_id = FLASH_UNKNOWN; - break; - } - - if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) { - printf ("** ERROR: sector count %d > max (%d) **\n", - info->sector_count, CONFIG_SYS_MAX_FLASH_SECT); - info->sector_count = CONFIG_SYS_MAX_FLASH_SECT; - } - - addr[0] = (FPW) INTEL_RESET; /* restore read mode */ - - return (info->size); -} - - -/*----------------------------------------------------------------------- - */ - -int flash_erase (flash_info_t *info, int s_first, int s_last) -{ - int prot, sect; - ulong type, start, last; - int rcode = 0; - int cflag, iflag; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf ("- missing\n"); - } else { - printf ("- no sectors to erase\n"); - } - return 1; - } - - type = (info->flash_id & FLASH_VENDMASK); - if ((type != FLASH_MAN_INTEL)) { - printf ("Can't erase unknown flash type %08lx - aborted\n", - info->flash_id); - return 1; - } - - prot = 0; - for (sect = s_first; sect <= s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf ("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - printf ("\n"); - } - - start = get_timer (0); - last = start; - - /* - * Disable interrupts which might cause a timeout - * here. Remember that our exception vectors are - * at address 0 in the flash, and we don't want a - * (ticker) exception to happen while the flash - * chip is in programming mode. - */ - cflag = icache_status (); - icache_disable (); - /* Disable interrupts which might cause a timeout here */ - iflag = disable_interrupts (); - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect <= s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - FPWV *addr = (FPWV *) (info->start[sect]); - FPW status; - - printf ("Erasing sector %2d ... ", sect); - - /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); - - *addr = (FPW) INTEL_CLEAR; /* clear status register */ - *addr = (FPW) INTEL_ERASE; /* erase setup */ - *addr = (FPW) INTEL_CONFIRM; /* erase confirm */ - - while (((status = *addr) & (FPW) INTEL_FINISHED) != (FPW) INTEL_FINISHED) { - if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - *addr = (FPW) INTEL_SUSPEND; /* suspend erase */ - *addr = (FPW) INTEL_RESET; /* reset to read mode */ - rcode = 1; - break; - } - } - - *addr = (FPWV)INTEL_CLEAR; /* clear status register cmd. */ - *addr = (FPWV)INTEL_RESET; /* resest to read mode */ - - printf (" done\n"); - } - } - - if (iflag) - enable_interrupts (); - - if (cflag) - icache_enable (); - - return rcode; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - * 4 - Flash not identified - */ - -int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) -{ - ulong cp, wp; - FPW data; - int count, i, l, rc, port_width; - - if (info->flash_id == FLASH_UNKNOWN) { - return 4; - } - - /* get lower word aligned address */ - wp = (addr & ~1); - port_width = 2; - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i = 0, cp = wp; i < l; ++i, ++cp) { - data = (data << 8) | (*(uchar *) cp); - } - for (; i < port_width && cnt > 0; ++i) { - data = (data << 8) | *src++; - --cnt; - ++cp; - } - for (; cnt == 0 && i < port_width; ++i, ++cp) { - data = (data << 8) | (*(uchar *) cp); - } - - if ((rc = write_data (info, wp, SWAP (data))) != 0) { - return (rc); - } - wp += port_width; - } - - /* - * handle word aligned part - */ - count = 0; - while (cnt >= port_width) { - data = 0; - for (i = 0; i < port_width; ++i) { - data = (data << 8) | *src++; - } - if ((rc = write_data (info, wp, SWAP (data))) != 0) { - return (rc); - } - wp += port_width; - cnt -= port_width; - if (count++ > 0x800) { - spin_wheel (); - count = 0; - } - } - - if (cnt == 0) { - return (0); - } - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) { - data = (data << 8) | *src++; - --cnt; - } - for (; i < port_width; ++i, ++cp) { - data = (data << 8) | (*(uchar *) cp); - } - - return (write_data (info, wp, SWAP (data))); -} - -/*----------------------------------------------------------------------- - * Write a word or halfword to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_data (flash_info_t *info, ulong dest, FPW data) -{ - FPWV *addr = (FPWV *) dest; - ulong status; - int cflag, iflag; - - /* Check if Flash is (sufficiently) erased */ - if ((*addr & data) != data) { - printf ("not erased at %08lx (%lx)\n", (ulong) addr, (ulong) *addr); - return (2); - } - /* - * Disable interrupts which might cause a timeout - * here. Remember that our exception vectors are - * at address 0 in the flash, and we don't want a - * (ticker) exception to happen while the flash - * chip is in programming mode. - */ - cflag = icache_status (); - icache_disable (); - /* Disable interrupts which might cause a timeout here */ - iflag = disable_interrupts (); - - *addr = (FPW) INTEL_PROG; /* write setup */ - *addr = data; - - /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); - - /* wait while polling the status register */ - while (((status = *addr) & (FPW) INTEL_FINISHED) != (FPW) INTEL_FINISHED) { - if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) { - *addr = (FPW) INTEL_RESET; /* restore read mode */ - return (1); - } - } - - *addr = (FPW) INTEL_RESET; /* restore read mode */ - - if (iflag) - enable_interrupts (); - - if (cflag) - icache_enable (); - - return (0); -} - -void inline spin_wheel (void) -{ - static int p = 0; - static char w[] = "\\/-"; - - printf ("\010%c", w[p]); - (++p == 3) ? (p = 0) : 0; -} - -/*----------------------------------------------------------------------- - * Set/Clear sector's lock bit, returns: - * 0 - OK - * 1 - Error (timeout, voltage problems, etc.) - */ -int flash_real_protect(flash_info_t *info, long sector, int prot) -{ - int i; - int rc = 0; - FPWV *addr = (FPWV *)(info->start[sector]); - int flag = disable_interrupts(); - - *addr = (FPW) INTEL_CLEAR; /* Clear status register */ - if (prot) { /* Set sector lock bit */ - *addr = (FPW) INTEL_LOCKBIT; /* Sector lock bit */ - *addr = (FPW) INTEL_PROTECT; /* set */ - } - else { /* Clear sector lock bit */ - *addr = (FPW) INTEL_LOCKBIT; /* All sectors lock bits */ - *addr = (FPW) INTEL_CONFIRM; /* clear */ - } - - reset_timer_masked (); - - while ((*addr & (FPW) INTEL_FINISHED) != (FPW) INTEL_FINISHED) { - if (get_timer_masked () > CONFIG_SYS_FLASH_UNLOCK_TOUT) { - printf("Flash lock bit operation timed out\n"); - rc = 1; - break; - } - } - - if (*addr != (FPW) INTEL_OK) { - printf("Flash lock bit operation failed at %08X, CSR=%08X\n", - (uint)addr, (uint)*addr); - rc = 1; - } - - if (!rc) - info->protect[sector] = prot; - - /* - * Clear lock bit command clears all sectors lock bits, so - * we have to restore lock bits of protected sectors. - */ - if (!prot) - { - for (i = 0; i < info->sector_count; i++) - { - if (info->protect[i]) - { - reset_timer_masked (); - addr = (FPWV *) (info->start[i]); - *addr = (FPW) INTEL_LOCKBIT; /* Sector lock bit */ - *addr = (FPW) INTEL_PROTECT; /* set */ - while ((*addr & (FPW) INTEL_FINISHED) != (FPW) INTEL_FINISHED) - { - if (get_timer_masked () > CONFIG_SYS_FLASH_UNLOCK_TOUT) - { - printf("Flash lock bit operation timed out\n"); - rc = 1; - break; - } - } - } - } - } - - if (flag) - enable_interrupts(); - - *addr = (FPW) INTEL_RESET; /* Reset to read array mode */ - - return rc; -} diff --git a/board/mp2usb/mp2usb.c b/board/mp2usb/mp2usb.c deleted file mode 100644 index e5eba6b..0000000 --- a/board/mp2usb/mp2usb.c +++ /dev/null @@ -1,98 +0,0 @@ -/* - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * Modified for the MP2USB by (C) Copyright 2005 Eric Benard - * ebenard@eukrea.com - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/arch/AT91RM9200.h> -#include <netdev.h> -#include <asm/io.h> -#if defined(CONFIG_DRIVER_ETHER) -#include <at91rm9200_net.h> -#include <dm9161.h> -#endif -#include <asm/mach-types.h> - -DECLARE_GLOBAL_DATA_PTR; - -/* - * Miscelaneous platform dependent initialisations - */ - -int board_init (void) -{ - /* Enable Ctrlc */ - console_init_f (); - - /* memory and cpu-speed are setup before relocation */ - /* so we do _nothing_ here */ - - /* arch number of MP2USB-Board. */ - gd->bd->bi_arch_number = MACH_TYPE_MP2USB; - /* adress of boot parameters */ - gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; - - return 0; -} - -int dram_init (void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM; - gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; - return 0; -} - -#ifdef CONFIG_DRIVER_ETHER -#if defined(CONFIG_CMD_NET) - -/* - * Name: - * at91rm9200_GetPhyInterface - * Description: - * Initialise the interface functions to the PHY - * Arguments: - * None - * Return value: - * None - */ -void at91rm9200_GetPhyInterface(AT91PS_PhyOps p_phyops) -{ - p_phyops->Init = dm9161_InitPhy; - p_phyops->IsPhyConnected = dm9161_IsPhyConnected; - p_phyops->GetLinkSpeed = dm9161_GetLinkSpeed; - p_phyops->AutoNegotiate = dm9161_AutoNegotiate; -} - -#endif -#endif /* CONFIG_DRIVER_ETHER */ - -#ifdef CONFIG_DRIVER_AT91EMAC -int board_eth_init(bd_t *bis) -{ - int rc = 0; - rc = at91emac_register(bis, 0); - return rc; -} -#endif diff --git a/board/munices/u-boot.lds b/board/munices/u-boot.lds deleted file mode 100644 index 99576bf..0000000 --- a/board/munices/u-boot.lds +++ /dev/null @@ -1,120 +0,0 @@ -/* - * (C) Copyright 2007 - * Heiko Schocher, DENX Software Engineering, hs@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - arch/powerpc/cpu/mpc5xxx/start.o (.text) - *(.text) - *(.got1) - . = ALIGN(16); - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x0FFF) & 0xFFFFF000; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2; - __fixup_entries = (. - _FIXUP_TABLE_) >> 2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(4096); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(4096); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - __bss_end__ = . ; - PROVIDE (end = .); -} diff --git a/board/mvblue/u-boot.lds b/board/mvblue/u-boot.lds index 03ba155..11624d2 100644 --- a/board/mvblue/u-boot.lds +++ b/board/mvblue/u-boot.lds @@ -51,13 +51,14 @@ SECTIONS PROVIDE (erotext = .); .reloc : { - KEEP(*(.got)) _GOT2_TABLE_ = .; KEEP(*(.got2)) + KEEP(*(.got)) + PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); _FIXUP_TABLE_ = .; KEEP(*(.fixup)) } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2; + __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; __fixup_entries = (. - _FIXUP_TABLE_) >> 2; .data : diff --git a/board/netphone/u-boot.lds b/board/netphone/u-boot.lds index b7b6c1a..a949e4f 100644 --- a/board/netphone/u-boot.lds +++ b/board/netphone/u-boot.lds @@ -47,13 +47,14 @@ SECTIONS PROVIDE (erotext = .); .reloc : { - KEEP(*(.got)) _GOT2_TABLE_ = .; KEEP(*(.got2)) + KEEP(*(.got)) + PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); _FIXUP_TABLE_ = .; KEEP(*(.fixup)) } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; __fixup_entries = (. - _FIXUP_TABLE_)>>2; .data : diff --git a/board/netta/u-boot.lds b/board/netta/u-boot.lds index b7b6c1a..a949e4f 100644 --- a/board/netta/u-boot.lds +++ b/board/netta/u-boot.lds @@ -47,13 +47,14 @@ SECTIONS PROVIDE (erotext = .); .reloc : { - KEEP(*(.got)) _GOT2_TABLE_ = .; KEEP(*(.got2)) + KEEP(*(.got)) + PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); _FIXUP_TABLE_ = .; KEEP(*(.fixup)) } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; __fixup_entries = (. - _FIXUP_TABLE_)>>2; .data : diff --git a/board/netta2/u-boot.lds b/board/netta2/u-boot.lds index b7b6c1a..a949e4f 100644 --- a/board/netta2/u-boot.lds +++ b/board/netta2/u-boot.lds @@ -47,13 +47,14 @@ SECTIONS PROVIDE (erotext = .); .reloc : { - KEEP(*(.got)) _GOT2_TABLE_ = .; KEEP(*(.got2)) + KEEP(*(.got)) + PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); _FIXUP_TABLE_ = .; KEEP(*(.fixup)) } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; __fixup_entries = (. - _FIXUP_TABLE_)>>2; .data : diff --git a/board/netvia/u-boot.lds b/board/netvia/u-boot.lds index b7b6c1a..a949e4f 100644 --- a/board/netvia/u-boot.lds +++ b/board/netvia/u-boot.lds @@ -47,13 +47,14 @@ SECTIONS PROVIDE (erotext = .); .reloc : { - KEEP(*(.got)) _GOT2_TABLE_ = .; KEEP(*(.got2)) + KEEP(*(.got)) + PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); _FIXUP_TABLE_ = .; KEEP(*(.fixup)) } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; __fixup_entries = (. - _FIXUP_TABLE_)>>2; .data : diff --git a/board/nvidia/common/board.c b/board/nvidia/common/board.c index 369cb22..3d6c248 100644 --- a/board/nvidia/common/board.c +++ b/board/nvidia/common/board.c @@ -30,6 +30,7 @@ #include <asm/arch/clk_rst.h> #include <asm/arch/pinmux.h> #include <asm/arch/uart.h> +#include "board.h" DECLARE_GLOBAL_DATA_PTR; @@ -37,6 +38,24 @@ const struct tegra2_sysinfo sysinfo = { CONFIG_TEGRA2_BOARD_STRING }; +#ifdef CONFIG_BOARD_EARLY_INIT_F +int board_early_init_f(void) +{ + /* Initialize periph clocks */ + clock_init(); + + /* Initialize periph pinmuxes */ + pinmux_init(); + + /* Initialize periph GPIOs */ + gpio_init(); + + /* Init UART, scratch regs, and start CPU */ + tegra2_start(); + return 0; +} +#endif /* EARLY_INIT */ + /* * Routine: timer_init * Description: init the timestamp and lastinc value @@ -54,10 +73,10 @@ int timer_init(void) static void clock_init_uart(void) { struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; - static int pllp_init_done; u32 reg; - if (!pllp_init_done) { + reg = readl(&clkrst->crc_pllp_base); + if (!(reg & PLL_BASE_OVRRIDE)) { /* Override pllp setup for 216MHz operation. */ reg = (PLL_BYPASS | PLL_BASE_OVRRIDE | PLL_DIVP); reg |= (((NVRM_PLLP_FIXED_FREQ_KHZ/500) << 8) | PLL_DIVM); @@ -68,8 +87,6 @@ static void clock_init_uart(void) reg &= ~PLL_BYPASS; writel(reg, &clkrst->crc_pllp_base); - - pllp_init_done++; } /* Now do the UART reset/clock enable */ @@ -172,6 +189,15 @@ void pinmux_init(void) } /* + * Routine: gpio_init + * Description: Do individual peripheral GPIO configs + */ +void gpio_init(void) +{ + gpio_config_uart(); +} + +/* * Routine: board_init * Description: Early hardware init. */ @@ -182,11 +208,5 @@ int board_init(void) /* board id for Linux */ gd->bd->bi_arch_number = CONFIG_MACH_TYPE; - /* Initialize peripheral clocks */ - clock_init(); - - /* Initialize periph pinmuxes */ - pinmux_init(); - return 0; } diff --git a/board/purple/lowlevel_init.S b/board/nvidia/common/board.h index 1bd3edb..350bc57 100644 --- a/board/purple/lowlevel_init.S +++ b/board/nvidia/common/board.h @@ -1,7 +1,6 @@ /* - * Memory sub-system initialization code for PURPLE development board. - * - * Copyright (c) 2003 Wolfgang Denk <wd@denx.de> + * (C) Copyright 2010,2011 + * NVIDIA Corporation <www.nvidia.com> * * See file CREDITS for list of people who contributed to this * project. @@ -22,15 +21,13 @@ * MA 02111-1307 USA */ -#include <config.h> -#include <asm/regdef.h> +#ifndef _BOARD_H_ +#define _BOARD_H_ -#define MC_IOGP 0xBF800800 +void tegra2_start(void); +void clock_init(void); +void pinmux_init(void); +void gpio_init(void); +void gpio_config_uart(void); - .globl lowlevel_init -lowlevel_init: - li t0, MC_IOGP - li t1, 0xf24 - sw t1, 0(t0) - jr ra - nop +#endif /* BOARD_H */ diff --git a/board/nvidia/harmony/Makefile b/board/nvidia/harmony/Makefile index 3a146cb..9fb6b57 100644 --- a/board/nvidia/harmony/Makefile +++ b/board/nvidia/harmony/Makefile @@ -26,6 +26,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).o +COBJS := $(BOARD).o COBJS += ../common/board.o SRCS := $(COBJS:.o=.c) diff --git a/board/nvidia/harmony/harmony.c b/board/nvidia/harmony/harmony.c new file mode 100644 index 0000000..f1ab050 --- /dev/null +++ b/board/nvidia/harmony/harmony.c @@ -0,0 +1,34 @@ +/* + * (C) Copyright 2010,2011 + * NVIDIA Corporation <www.nvidia.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/tegra2.h> + +/* + * Routine: gpio_config_uart + * Description: Does nothing on Harmony - no conflict w/SPI. + */ +void gpio_config_uart(void) +{ +} diff --git a/board/nvidia/seaboard/Makefile b/board/nvidia/seaboard/Makefile index 3a146cb..9fb6b57 100644 --- a/board/nvidia/seaboard/Makefile +++ b/board/nvidia/seaboard/Makefile @@ -26,6 +26,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).o +COBJS := $(BOARD).o COBJS += ../common/board.o SRCS := $(COBJS:.o=.c) diff --git a/board/nvidia/seaboard/seaboard.c b/board/nvidia/seaboard/seaboard.c new file mode 100644 index 0000000..4b9a8f3 --- /dev/null +++ b/board/nvidia/seaboard/seaboard.c @@ -0,0 +1,52 @@ +/* + * (C) Copyright 2010,2011 + * NVIDIA Corporation <www.nvidia.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/tegra2.h> +#include <asm/arch/gpio.h> + +/* + * Routine: gpio_config_uart + * Description: Force GPIO_PI3 low on Seaboard so UART4 works. + */ +void gpio_config_uart(void) +{ + int gp = GPIO_PI3; + struct gpio_ctlr *gpio = (struct gpio_ctlr *)NV_PA_GPIO_BASE; + struct gpio_ctlr_bank *bank = &gpio->gpio_bank[GPIO_BANK(gp)]; + u32 val; + + /* Enable UART via GPIO_PI3 (port 8, bit 3) so serial console works */ + val = readl(&bank->gpio_config[GPIO_PORT(gp)]); + val |= 1 << GPIO_BIT(gp); + writel(val, &bank->gpio_config[GPIO_PORT(gp)]); + + val = readl(&bank->gpio_out[GPIO_PORT(gp)]); + val &= ~(1 << GPIO_BIT(gp)); + writel(val, &bank->gpio_out[GPIO_PORT(gp)]); + + val = readl(&bank->gpio_dir_out[GPIO_PORT(gp)]); + val |= 1 << GPIO_BIT(gp); + writel(val, &bank->gpio_dir_out[GPIO_PORT(gp)]); +} diff --git a/board/nx823/u-boot.lds b/board/nx823/u-boot.lds index 2fac727..fd4e8a5 100644 --- a/board/nx823/u-boot.lds +++ b/board/nx823/u-boot.lds @@ -47,13 +47,14 @@ SECTIONS PROVIDE (erotext = .); .reloc : { - KEEP(*(.got)) _GOT2_TABLE_ = .; KEEP(*(.got2)) + KEEP(*(.got)) + PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); _FIXUP_TABLE_ = .; KEEP(*(.fixup)) } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; __fixup_entries = (. - _FIXUP_TABLE_)>>2; .data : diff --git a/board/purple/config.mk b/board/purple/config.mk deleted file mode 100644 index 404c3fb..0000000 --- a/board/purple/config.mk +++ /dev/null @@ -1,32 +0,0 @@ -# -# (C) Copyright 2003 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -# -# Purple board with MIPS 5Kc CPU core -# - -# ROM version -CONFIG_SYS_TEXT_BASE = 0xB0000000 - -# RAM version -#CONFIG_SYS_TEXT_BASE = 0x80100000 diff --git a/board/purple/flash.c b/board/purple/flash.c deleted file mode 100644 index 5cee35e..0000000 --- a/board/purple/flash.c +++ /dev/null @@ -1,595 +0,0 @@ -/* - * (C) Copyright 2003 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/inca-ip.h> - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -typedef unsigned long FLASH_PORT_WIDTH; -typedef volatile unsigned long FLASH_PORT_WIDTHV; - -#define FLASH_ID_MASK 0xFFFFFFFF - -#define FPW FLASH_PORT_WIDTH -#define FPWV FLASH_PORT_WIDTHV - -#define ORMASK(size) ((-size) & OR_AM_MSK) - -#define FLASH29_REG_ADRS(reg) ((FPWV *)PHYS_FLASH_1 + (reg)) - -/* FLASH29 command register addresses */ - -#define FLASH29_REG_FIRST_CYCLE FLASH29_REG_ADRS (0x1555) -#define FLASH29_REG_SECOND_CYCLE FLASH29_REG_ADRS (0x2aaa) -#define FLASH29_REG_THIRD_CYCLE FLASH29_REG_ADRS (0x3555) -#define FLASH29_REG_FOURTH_CYCLE FLASH29_REG_ADRS (0x4555) -#define FLASH29_REG_FIFTH_CYCLE FLASH29_REG_ADRS (0x5aaa) -#define FLASH29_REG_SIXTH_CYCLE FLASH29_REG_ADRS (0x6555) - -/* FLASH29 command definitions */ - -#define FLASH29_CMD_FIRST 0xaaaaaaaa -#define FLASH29_CMD_SECOND 0x55555555 -#define FLASH29_CMD_FOURTH 0xaaaaaaaa -#define FLASH29_CMD_FIFTH 0x55555555 -#define FLASH29_CMD_SIXTH 0x10101010 - -#define FLASH29_CMD_SECTOR 0x30303030 -#define FLASH29_CMD_PROGRAM 0xa0a0a0a0 -#define FLASH29_CMD_CHIP_ERASE 0x80808080 -#define FLASH29_CMD_READ_RESET 0xf0f0f0f0 -#define FLASH29_CMD_AUTOSELECT 0x90909090 -#define FLASH29_CMD_READ 0x70707070 - -#define IN_RAM_CMD_READ 0x1 -#define IN_RAM_CMD_WRITE 0x2 - -#define FLASH_WRITE_CMD ((ulong)(flash_write_cmd) & 0x7)+0xbf008000 -#define FLASH_READ_CMD ((ulong)(flash_read_cmd) & 0x7)+0xbf008000 - -typedef void (*FUNCPTR_CP)(ulong *source, ulong *destination, ulong nlongs); -typedef void (*FUNCPTR_RD)(int cmd, FPWV * pFA, char * string, int strLen); -typedef void (*FUNCPTR_WR)(int cmd, FPWV * pFA, FPW value); - -static ulong flash_get_size(FPWV *addr, flash_info_t *info); -static int write_word(flash_info_t *info, FPWV *dest, FPW data); -static void flash_get_offsets(ulong base, flash_info_t *info); -static flash_info_t *flash_get_info(ulong base); - -static void load_cmd(ulong cmd); -static ulong in_ram_cmd = 0; - - -/****************************************************************************** -* -* Don't change the program architecture -* This architecture assure the program -* can be relocated to scratch ram -*/ -static void flash_read_cmd(int cmd, FPWV * pFA, char * string, int strLen) -{ - int i,j; - FPW temp,temp1; - FPWV *str; - - str = (FPWV *)string; - - j= strLen/4; - - if(cmd == FLASH29_CMD_AUTOSELECT) - { - *(FLASH29_REG_FIRST_CYCLE) = FLASH29_CMD_FIRST; - *(FLASH29_REG_SECOND_CYCLE) = FLASH29_CMD_SECOND; - *(FLASH29_REG_THIRD_CYCLE) = FLASH29_CMD_AUTOSELECT; - } - - if(cmd == FLASH29_CMD_READ) - { - i = 0; - while(i<j) - { - temp = *pFA++; - temp1 = *(int *)0xa0000000; - *(int *)0xbf0081f8 = temp1 + temp; - *str++ = temp; - i++; - } - } - - if(cmd == FLASH29_CMD_READ_RESET) - { - *(FLASH29_REG_FIRST_CYCLE) = FLASH29_CMD_FIRST; - *(FLASH29_REG_SECOND_CYCLE) = FLASH29_CMD_SECOND; - *(FLASH29_REG_THIRD_CYCLE) = FLASH29_CMD_READ_RESET; - } - - *(int *)0xbf0081f8 = *(int *)0xa0000000; /* dummy read switch back to sdram interface */ -} - -/****************************************************************************** -* -* Don't change the program architecture -* This architecture assure the program -* can be relocated to scratch ram -*/ -static void flash_write_cmd(int cmd, FPWV * pFA, FPW value) -{ - *(FLASH29_REG_FIRST_CYCLE) = FLASH29_CMD_FIRST; - *(FLASH29_REG_SECOND_CYCLE) = FLASH29_CMD_SECOND; - - if (cmd == FLASH29_CMD_SECTOR) - { - *(FLASH29_REG_THIRD_CYCLE) = FLASH29_CMD_CHIP_ERASE; - *(FLASH29_REG_FOURTH_CYCLE) = FLASH29_CMD_FOURTH; - *(FLASH29_REG_FIFTH_CYCLE) = FLASH29_CMD_FIFTH; - *pFA = FLASH29_CMD_SECTOR; - } - - if (cmd == FLASH29_CMD_SIXTH) - { - *(FLASH29_REG_THIRD_CYCLE) = FLASH29_CMD_CHIP_ERASE; - *(FLASH29_REG_FOURTH_CYCLE) = FLASH29_CMD_FOURTH; - *(FLASH29_REG_FIFTH_CYCLE) = FLASH29_CMD_FIFTH; - *(FLASH29_REG_SIXTH_CYCLE) = FLASH29_CMD_SIXTH; - } - - if (cmd == FLASH29_CMD_PROGRAM) - { - *(FLASH29_REG_THIRD_CYCLE) = FLASH29_CMD_PROGRAM; - *pFA = value; - } - - if (cmd == FLASH29_CMD_READ_RESET) - { - *(FLASH29_REG_THIRD_CYCLE) = FLASH29_CMD_READ_RESET; - } - - *(int *)0xbf0081f8 = *(int *)0xa0000000; /* dummy read switch back to sdram interface */ -} - -static void load_cmd(ulong cmd) -{ - ulong *src; - ulong *dst; - FUNCPTR_CP absEntry; - ulong func; - - if (in_ram_cmd & cmd) return; - - if (cmd == IN_RAM_CMD_READ) - { - func = (ulong)flash_read_cmd; - } - else - { - func = (ulong)flash_write_cmd; - } - - src = (ulong *)(func & 0xfffffff8); - dst = (ulong *)0xbf008000; - absEntry = (FUNCPTR_CP)(0xbf0081d0); - absEntry(src,dst,0x38); - - in_ram_cmd = cmd; -} - -/*----------------------------------------------------------------------- - * flash_init() - * - * sets up flash_info and returns size of FLASH (bytes) - */ -unsigned long flash_init (void) -{ - unsigned long size = 0; - int i; - - load_cmd(IN_RAM_CMD_READ); - - /* Init: no FLASHes known */ - for (i=0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) { - ulong flashbase = PHYS_FLASH_1; - ulong * buscon = (ulong *) INCA_IP_EBU_EBU_BUSCON0; - - /* Disable write protection */ - *buscon &= ~INCA_IP_EBU_EBU_BUSCON1_WRDIS; - -#if 1 - memset(&flash_info[i], 0, sizeof(flash_info_t)); -#endif - - flash_info[i].size = - flash_get_size((FPW *)flashbase, &flash_info[i]); - - if (flash_info[i].flash_id == FLASH_UNKNOWN) { - printf ("## Unknown FLASH on Bank %d - Size = 0x%08lx\n", - i, flash_info[i].size); - } - - size += flash_info[i].size; - } - -#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE - /* monitor protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1, - flash_get_info(CONFIG_SYS_MONITOR_BASE)); -#endif - -#ifdef CONFIG_ENV_IS_IN_FLASH - /* ENV protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR+CONFIG_ENV_SIZE-1, - flash_get_info(CONFIG_ENV_ADDR)); -#endif - - return size; -} - -/*----------------------------------------------------------------------- - */ -static void flash_get_offsets (ulong base, flash_info_t *info) -{ - int i; - - if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD - && (info->flash_id & FLASH_TYPEMASK) == FLASH_AM160B) { - - int bootsect_size[4]; /* number of bytes/boot sector */ - int sect_size; /* number of bytes/regular sector */ - - bootsect_size[0] = 0x00008000; - bootsect_size[1] = 0x00004000; - bootsect_size[2] = 0x00004000; - bootsect_size[3] = 0x00010000; - sect_size = 0x00020000; - - /* set sector offsets for bottom boot block type */ - for (i = 0; i < info->sector_count; i++) { - info->start[i] = base; - base += i < 4 ? bootsect_size[i] : sect_size; - } - } -} - -/*----------------------------------------------------------------------- - */ - -static flash_info_t *flash_get_info(ulong base) -{ - int i; - flash_info_t * info; - - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i ++) { - info = & flash_info[i]; - if (info->start[0] <= base && base < info->start[0] + info->size) - break; - } - - return i == CONFIG_SYS_MAX_FLASH_BANKS ? 0 : info; -} - -/*----------------------------------------------------------------------- - */ - -void flash_print_info (flash_info_t *info) -{ - int i; - uchar *boottype; - uchar *bootletter; - char *fmt; - uchar botbootletter[] = "B"; - uchar topbootletter[] = "T"; - uchar botboottype[] = "bottom boot sector"; - uchar topboottype[] = "top boot sector"; - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_AMD: printf ("AMD "); break; - case FLASH_MAN_BM: printf ("BRIGHT MICRO "); break; - case FLASH_MAN_FUJ: printf ("FUJITSU "); break; - case FLASH_MAN_SST: printf ("SST "); break; - case FLASH_MAN_STM: printf ("STM "); break; - case FLASH_MAN_INTEL: printf ("INTEL "); break; - default: printf ("Unknown Vendor "); break; - } - - /* check for top or bottom boot, if it applies */ - if (info->flash_id & FLASH_BTYPE) { - boottype = botboottype; - bootletter = botbootletter; - } - else { - boottype = topboottype; - bootletter = topbootletter; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_AM160B: - fmt = "29LV160B%s (16 Mbit, %s)\n"; - break; - case FLASH_28F800C3B: - case FLASH_28F800C3T: - fmt = "28F800C3%s (8 Mbit, %s)\n"; - break; - case FLASH_INTEL800B: - case FLASH_INTEL800T: - fmt = "28F800B3%s (8 Mbit, %s)\n"; - break; - case FLASH_28F160C3B: - case FLASH_28F160C3T: - fmt = "28F160C3%s (16 Mbit, %s)\n"; - break; - case FLASH_INTEL160B: - case FLASH_INTEL160T: - fmt = "28F160B3%s (16 Mbit, %s)\n"; - break; - case FLASH_28F320C3B: - case FLASH_28F320C3T: - fmt = "28F320C3%s (32 Mbit, %s)\n"; - break; - case FLASH_INTEL320B: - case FLASH_INTEL320T: - fmt = "28F320B3%s (32 Mbit, %s)\n"; - break; - case FLASH_28F640C3B: - case FLASH_28F640C3T: - fmt = "28F640C3%s (64 Mbit, %s)\n"; - break; - case FLASH_INTEL640B: - case FLASH_INTEL640T: - fmt = "28F640B3%s (64 Mbit, %s)\n"; - break; - default: - fmt = "Unknown Chip Type\n"; - break; - } - - printf (fmt, bootletter, boottype); - - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, - info->sector_count); - - printf (" Sector Start Addresses:"); - - for (i=0; i<info->sector_count; ++i) { - if ((i % 5) == 0) { - printf ("\n "); - } - - printf (" %08lX%s", info->start[i], - info->protect[i] ? " (RO)" : " "); - } - - printf ("\n"); -} - -/*----------------------------------------------------------------------- - */ - -/* - * The following code cannot be run from FLASH! - */ - -ulong flash_get_size (FPWV *addr, flash_info_t *info) -{ - FUNCPTR_RD absEntry; - FPW retValue; - int flag; - - load_cmd(IN_RAM_CMD_READ); - absEntry = (FUNCPTR_RD)FLASH_READ_CMD; - - flag = disable_interrupts(); - absEntry(FLASH29_CMD_AUTOSELECT,0,0,0); - if (flag) enable_interrupts(); - - udelay(100); - - flag = disable_interrupts(); - absEntry(FLASH29_CMD_READ, addr + 1, (char *)&retValue, sizeof(retValue)); - absEntry(FLASH29_CMD_READ_RESET,0,0,0); - if (flag) enable_interrupts(); - - udelay(100); - - switch (retValue) { - - case (FPW)AMD_ID_LV160B: - info->flash_id += FLASH_AM160B; - info->sector_count = 35; - info->size = 0x00400000; - break; /* => 8 or 16 MB */ - - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - return (0); /* => no or unknown flash */ - } - - flash_get_offsets((ulong)addr, info); - - return (info->size); -} - -/*----------------------------------------------------------------------- - */ - -int flash_erase (flash_info_t *info, int s_first, int s_last) -{ - FPWV *addr; - int flag, prot, sect; - ulong start, now, last; - FUNCPTR_WR absEntry; - - load_cmd(IN_RAM_CMD_WRITE); - absEntry = (FUNCPTR_WR)FLASH_WRITE_CMD; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf ("- missing\n"); - } else { - printf ("- no sectors to erase\n"); - } - return 1; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_AM160B: - break; - case FLASH_UNKNOWN: - default: - printf ("Can't erase unknown flash type %08lx - aborted\n", - info->flash_id); - return 1; - } - - prot = 0; - for (sect=s_first; sect<=s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf ("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - printf ("\n"); - } - - last = get_timer(0); - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect<=s_last; sect++) { - - if (info->protect[sect] != 0) /* protected, skip it */ - continue; - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - addr = (FPWV *)(info->start[sect]); - absEntry(FLASH29_CMD_SECTOR, addr, 0); - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - start = get_timer(0); - - while ((now = get_timer(start)) <= CONFIG_SYS_FLASH_ERASE_TOUT) { - - /* show that we're waiting */ - if ((get_timer(last)) > CONFIG_SYS_HZ) {/* every second */ - putc ('.'); - last = get_timer(0); - } - } - - flag = disable_interrupts(); - absEntry(FLASH29_CMD_READ_RESET,0,0); - if (flag) - enable_interrupts(); - } - - printf (" done\n"); - return 0; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) -{ - FPW data = 0; /* 16 or 32 bit word, matches flash bus width on MPC8XX */ - int bytes; /* number of bytes to program in current word */ - int left; /* number of bytes left to program */ - int i, res; - - for (left = cnt, res = 0; - left > 0 && res == 0; - addr += sizeof(data), left -= sizeof(data) - bytes) { - - bytes = addr & (sizeof(data) - 1); - addr &= ~(sizeof(data) - 1); - - /* combine source and destination data so can program - * an entire word of 16 or 32 bits - */ - for (i = 0; i < sizeof(data); i++) { - data <<= 8; - if (i < bytes || i - bytes >= left ) - data += *((uchar *)addr + i); - else - data += *src++; - } - - res = write_word(info, (FPWV *)addr, data); - } - - return (res); -} - -static int write_word (flash_info_t *info, FPWV *dest, FPW data) -{ - int res = 0; /* result, assume success */ - FUNCPTR_WR absEntry; - int flag; - - /* Check if Flash is (sufficiently) erased */ - if ((*dest & data) != data) { - return (2); - } - - if (info->start[0] != PHYS_FLASH_1) - { - return (3); - } - - load_cmd(IN_RAM_CMD_WRITE); - absEntry = (FUNCPTR_WR)FLASH_WRITE_CMD; - - flag = disable_interrupts(); - absEntry(FLASH29_CMD_PROGRAM,dest,data); - if (flag) enable_interrupts(); - - udelay(100); - - flag = disable_interrupts(); - absEntry(FLASH29_CMD_READ_RESET,0,0); - if (flag) enable_interrupts(); - - return (res); -} diff --git a/board/purple/purple.c b/board/purple/purple.c deleted file mode 100644 index 4e9e700..0000000 --- a/board/purple/purple.c +++ /dev/null @@ -1,284 +0,0 @@ -/* - * (C) Copyright 2003 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <command.h> -#include <netdev.h> -#include <asm/inca-ip.h> -#include <asm/regdef.h> -#include <asm/mipsregs.h> -#include <asm/io.h> -#include <asm/addrspace.h> -#include <asm/cacheops.h> -#include <asm/reboot.h> - -#include "sconsole.h" - -#define cache_unroll(base,op) \ - __asm__ __volatile__(" \ - .set noreorder; \ - .set mips3; \ - cache %1, (%0); \ - .set mips0; \ - .set reorder" \ - : \ - : "r" (base), \ - "i" (op)); - -typedef void (*FUNCPTR)(ulong *source, ulong *destination, ulong nlongs); - -extern void asc_serial_init (void); -extern void asc_serial_putc (char); -extern void asc_serial_puts (const char *); -extern int asc_serial_getc (void); -extern int asc_serial_tstc (void); -extern void asc_serial_setbrg (void); - -void _machine_restart(void) -{ - void (*f)(void) = (void *) 0xbfc00000; - - f(); -} - -static void sdram_timing_init (ulong size) -{ - register uint pass; - register uint done; - register uint count; - register uint p0, p1, p2, p3, p4; - register uint addr; - -#define WRITE_MC_IOGP_1 *(uint *)0xbf800800 = (p1<<14)+(p2<<13)+(p4<<8)+(p0<<4)+p3; -#define WRITE_MC_IOGP_2 *(uint *)0xbf800800 = (p1<<14)+(p2<<13)+((p4-16)<<8)+(p0<<4)+p3; - - done = 0; - p0 = 2; - while (p0 < 4 && done == 0) { - p1 = 0; - while (p1 < 2 && done == 0) { - p2 = 0; - while (p2 < 2 && done == 0) { - p3 = 0; - while (p3 < 16 && done == 0) { - count = 0; - p4 = 0; - while (p4 < 32 && done == 0) { - WRITE_MC_IOGP_1; - - for (addr = CKSEG1 + 0x4000; - addr < CKSEG1ADDR (size); - addr = addr + 4) { - *(uint *) addr = 0xaa55aa55; - } - - pass = 1; - - for (addr = CKSEG1 + 0x4000; - addr < CKSEG1ADDR (size) && pass == 1; - addr = addr + 4) { - if (*(uint *) addr != 0xaa55aa55) - pass = 0; - } - - if (pass == 1) { - count++; - } else { - count = 0; - } - - if (count == 32) { - WRITE_MC_IOGP_2; - done = 1; - } - p4++; - } - p3++; - } - p2++; - } - p1++; - } - p0++; - if (p0 == 1) - p0++; - } -} - -phys_size_t initdram(int board_type) -{ - /* The only supported number of SDRAM banks is 4. - */ -#define CONFIG_SYS_NB 4 - - ulong cfgpb0 = *INCA_IP_SDRAM_MC_CFGPB0; - ulong cfgdw = *INCA_IP_SDRAM_MC_CFGDW; - int cols = cfgpb0 & 0xF; - int rows = (cfgpb0 & 0xF0) >> 4; - int dw = cfgdw & 0xF; - ulong size = (1 << (rows + cols)) * (1 << (dw - 1)) * CONFIG_SYS_NB; - void (* sdram_init) (ulong); - - sdram_init = (void (*)(ulong)) CKSEG0ADDR(&sdram_timing_init); - - sdram_init(0x10000); - - return size; -} - -int checkboard (void) -{ - - unsigned long chipid = *(unsigned long *)0xB800C800; - - printf ("Board: Purple PLB 2800 chip version %ld, ", chipid & 0xF); - - printf("CPU Speed %d MHz\n", CPU_CLOCK_RATE/1000000); - - set_io_port_base(0); - - return 0; -} - -int misc_init_r (void) -{ - asc_serial_init (); - - sconsole_putc = asc_serial_putc; - sconsole_puts = asc_serial_puts; - sconsole_getc = asc_serial_getc; - sconsole_tstc = asc_serial_tstc; - sconsole_setbrg = asc_serial_setbrg; - - sconsole_flush (); - return (0); -} - -/******************************************************************************* -* -* copydwords - copy one buffer to another a long at a time -* -* This routine copies the first <nlongs> longs from <source> to <destination>. -*/ -static void copydwords (ulong *source, ulong *destination, ulong nlongs) -{ - ulong temp,temp1; - ulong *dstend = destination + nlongs; - - while (destination < dstend) { - temp = *source++; - /* dummy read from sdram */ - temp1 = *(ulong *)0xa0000000; - /* avoid optimization from compliler */ - *(ulong *)0xbf0081f8 = temp1 + temp; - *destination++ = temp; - - } -} - -/******************************************************************************* -* -* copyLongs - copy one buffer to another a long at a time -* -* This routine copies the first <nlongs> longs from <source> to <destination>. -*/ -static void copyLongs (ulong *source, ulong *destination, ulong nlongs) -{ - FUNCPTR absEntry; - - absEntry = (FUNCPTR)(0xbf008000+((ulong)copydwords & 0x7)); - absEntry(source, destination, nlongs); -} - -/******************************************************************************* -* -* programLoad - load program into ram -* -* This routine load copydwords into ram -* -*/ -static void programLoad(void) -{ - FUNCPTR absEntry; - ulong *src,*dst; - - src = (ulong *)(CONFIG_SYS_TEXT_BASE + 0x428); - dst = (ulong *)0xbf0081d0; - - absEntry = (FUNCPTR)(CONFIG_SYS_TEXT_BASE + 0x400); - absEntry(src,dst,0x6); - - src = (ulong *)((ulong)copydwords & 0xfffffff8); - dst = (ulong *)0xbf008000; - - absEntry(src,dst,0x38); -} - -/******************************************************************************* -* -* copy_code - copy u-boot image from flash to RAM -* -* This routine is needed to solve flash problems on this board -* -*/ -void copy_code (ulong dest_addr) -{ - extern long uboot_end_data; - unsigned long start; - unsigned long end; - - /* load copydwords into ram - */ - programLoad(); - - /* copy u-boot code - */ - copyLongs((ulong *)CONFIG_SYS_MONITOR_BASE, - (ulong *)dest_addr, - ((ulong)&uboot_end_data - CONFIG_SYS_MONITOR_BASE + 3) / 4); - - - /* flush caches - */ - - start = CKSEG0; - end = start + CONFIG_SYS_DCACHE_SIZE; - while(start < end) { - cache_unroll(start,Index_Writeback_Inv_D); - start += CONFIG_SYS_CACHELINE_SIZE; - } - - start = CKSEG0; - end = start + CONFIG_SYS_ICACHE_SIZE; - while(start < end) { - cache_unroll(start,Index_Invalidate_I); - start += CONFIG_SYS_CACHELINE_SIZE; - } -} - -#ifdef CONFIG_PLB2800_ETHER -int board_eth_init(bd_t *bis) -{ - return plb2800_eth_initialize(bis); -} -#endif diff --git a/board/purple/sconsole.c b/board/purple/sconsole.c deleted file mode 100644 index cd9d871..0000000 --- a/board/purple/sconsole.c +++ /dev/null @@ -1,125 +0,0 @@ -/* - * (C) Copyright 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <config.h> -#include <common.h> - -#include "sconsole.h" - -void (*sconsole_putc) (char) = 0; -void (*sconsole_puts) (const char *) = 0; -int (*sconsole_getc) (void) = 0; -int (*sconsole_tstc) (void) = 0; -void (*sconsole_setbrg) (void) = 0; - -int serial_init (void) -{ - sconsole_buffer_t *sb = SCONSOLE_BUFFER; - - sb->pos = 0; - sb->size = 0; - sb->max_size = CONFIG_SYS_SCONSOLE_SIZE - sizeof (sconsole_buffer_t); - - return (0); -} - -void serial_putc (char c) -{ - if (sconsole_putc) { - (*sconsole_putc) (c); - } else { - sconsole_buffer_t *sb = SCONSOLE_BUFFER; - - if (c) { - sb->data[sb->pos++] = c; - if (sb->pos == sb->max_size) { - sb->pos = 0; - } - if (sb->size < sb->max_size) { - sb->size++; - } - } - } -} - -void serial_puts (const char *s) -{ - if (sconsole_puts) { - (*sconsole_puts) (s); - } else { - sconsole_buffer_t *sb = SCONSOLE_BUFFER; - - while (*s) { - sb->data[sb->pos++] = *s++; - if (sb->pos == sb->max_size) { - sb->pos = 0; - } - if (sb->size < sb->max_size) { - sb->size++; - } - } - } -} - -int serial_getc (void) -{ - if (sconsole_getc) { - return (*sconsole_getc) (); - } else { - return 0; - } -} - -int serial_tstc (void) -{ - if (sconsole_tstc) { - return (*sconsole_tstc) (); - } else { - return 0; - } -} - -void serial_setbrg (void) -{ - if (sconsole_setbrg) { - (*sconsole_setbrg) (); - } -} - -void sconsole_flush (void) -{ - if (sconsole_putc) { - sconsole_buffer_t *sb = SCONSOLE_BUFFER; - unsigned int end = sb->pos < sb->size - ? sb->pos + sb->max_size - sb->size - : sb->pos - sb->size; - - while (sb->size) { - (*sconsole_putc) (sb->data[end++]); - if (end == sb->max_size) { - end = 0; - } - sb->size--; - } - } -} diff --git a/board/purple/sconsole.h b/board/purple/sconsole.h deleted file mode 100644 index baed5fb..0000000 --- a/board/purple/sconsole.h +++ /dev/null @@ -1,46 +0,0 @@ -/* - * (C) Copyright 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef _SCONSOLE_H_ -#define _SCONSOLE_H_ - -#include <config.h> - -typedef struct sconsole_buffer_s { - unsigned long size; - unsigned long max_size; - unsigned long pos; - char data[1]; -} sconsole_buffer_t; - -#define SCONSOLE_BUFFER ((sconsole_buffer_t *) CONFIG_SYS_SCONSOLE_ADDR) - -extern void (* sconsole_putc) (char); -extern void (* sconsole_puts) (const char *); -extern int (* sconsole_getc) (void); -extern int (* sconsole_tstc) (void); -extern void (* sconsole_setbrg) (void); - -extern void sconsole_flush (void); - -#endif diff --git a/board/purple/u-boot.lds b/board/purple/u-boot.lds deleted file mode 100644 index 719f268..0000000 --- a/board/purple/u-boot.lds +++ /dev/null @@ -1,75 +0,0 @@ -/* - * (C) Copyright 2003 - * Wolfgang Denk Engineering, <wd@denx.de> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* -OUTPUT_FORMAT("elf32-bigmips", "elf32-bigmips", "elf32-bigmips") -*/ -OUTPUT_FORMAT("elf32-tradbigmips", "elf32-tradbigmips", "elf32-tradlittlemips") -OUTPUT_ARCH(mips) -ENTRY(_start) -SECTIONS -{ - . = 0x00000000; - - . = ALIGN(4); - .text : - { - arch/mips/cpu/start.o (.text) - board/purple/lowlevel_init.o (.text) - . = DEFINED(env_offset) ? env_offset : .; - common/env_embedded.o (.ppcenv) - - *(.text) - } - - . = ALIGN(4); - .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } - - . = ALIGN(4); - .data : { *(.data) } - - . = .; - _gp = ALIGN(16) + 0x7ff0; - - .got : { - __got_start = .; - *(.got) - __got_end = .; - } - - .sdata : { *(.sdata) } - - .u_boot_cmd : { - __u_boot_cmd_start = .; - *(.u_boot_cmd) - __u_boot_cmd_end = .; - } - - uboot_end_data = .; - num_got_entries = (__got_end - __got_start) >> 2; - - . = ALIGN(4); - .sbss (NOLOAD) : { *(.sbss) } - .bss (NOLOAD) : { *(.bss) . = ALIGN(4); } - uboot_end = .; -} diff --git a/board/quantum/u-boot.lds b/board/quantum/u-boot.lds index 05cc233..d0b60cf 100644 --- a/board/quantum/u-boot.lds +++ b/board/quantum/u-boot.lds @@ -47,13 +47,14 @@ SECTIONS PROVIDE (erotext = .); .reloc : { - KEEP(*(.got)) _GOT2_TABLE_ = .; KEEP(*(.got2)) + KEEP(*(.got)) + PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); _FIXUP_TABLE_ = .; KEEP(*(.fixup)) } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; __fixup_entries = (. - _FIXUP_TABLE_)>>2; .data : diff --git a/board/r360mpi/u-boot.lds b/board/r360mpi/u-boot.lds index 60b3cbf..2fa085a 100644 --- a/board/r360mpi/u-boot.lds +++ b/board/r360mpi/u-boot.lds @@ -49,13 +49,14 @@ SECTIONS PROVIDE (erotext = .); .reloc : { - KEEP(*(.got)) _GOT2_TABLE_ = .; KEEP(*(.got2)) + KEEP(*(.got)) + PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); _FIXUP_TABLE_ = .; KEEP(*(.fixup)) } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; __fixup_entries = (. - _FIXUP_TABLE_)>>2; .data : diff --git a/board/rbc823/u-boot.lds b/board/rbc823/u-boot.lds index 7b790ab..d943fb6 100644 --- a/board/rbc823/u-boot.lds +++ b/board/rbc823/u-boot.lds @@ -58,13 +58,14 @@ SECTIONS PROVIDE (erotext = .); .reloc : { - KEEP(*(.got)) _GOT2_TABLE_ = .; KEEP(*(.got2)) + KEEP(*(.got)) + PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); _FIXUP_TABLE_ = .; KEEP(*(.fixup)) } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; __fixup_entries = (. - _FIXUP_TABLE_)>>2; .data : diff --git a/board/rmu/u-boot.lds b/board/rmu/u-boot.lds index 05cc233..d0b60cf 100644 --- a/board/rmu/u-boot.lds +++ b/board/rmu/u-boot.lds @@ -47,13 +47,14 @@ SECTIONS PROVIDE (erotext = .); .reloc : { - KEEP(*(.got)) _GOT2_TABLE_ = .; KEEP(*(.got2)) + KEEP(*(.got)) + PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); _FIXUP_TABLE_ = .; KEEP(*(.fixup)) } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; __fixup_entries = (. - _FIXUP_TABLE_)>>2; .data : diff --git a/board/rsdproto/u-boot.lds b/board/rsdproto/u-boot.lds index b36047a..a729c52 100644 --- a/board/rsdproto/u-boot.lds +++ b/board/rsdproto/u-boot.lds @@ -74,13 +74,14 @@ SECTIONS PROVIDE (erotext = .); .reloc : { - *(.got) _GOT2_TABLE_ = .; - *(.got2) + KEEP(*(.got2)) + KEEP(*(.got)) + PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); _FIXUP_TABLE_ = .; - *(.fixup) + KEEP(*(.fixup)) } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; __fixup_entries = (. - _FIXUP_TABLE_)>>2; .data : diff --git a/board/samsung/smdk6400/config.mk b/board/samsung/smdk6400/config.mk index 90cbcf2..6f04c2f 100644 --- a/board/samsung/smdk6400/config.mk +++ b/board/samsung/smdk6400/config.mk @@ -28,5 +28,3 @@ CONFIG_SYS_TEXT_BASE = $(RAM_TEXT) else CONFIG_SYS_TEXT_BASE = 0 endif - -LDSCRIPT := $(SRCTREE)/board/$(BOARDDIR)/u-boot-nand.lds diff --git a/board/sandpoint/u-boot.lds b/board/sandpoint/u-boot.lds index 841a29b..e382fd1 100644 --- a/board/sandpoint/u-boot.lds +++ b/board/sandpoint/u-boot.lds @@ -49,13 +49,14 @@ SECTIONS PROVIDE (erotext = .); .reloc : { - KEEP(*(.got)) _GOT2_TABLE_ = .; KEEP(*(.got2)) + KEEP(*(.got)) + PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); _FIXUP_TABLE_ = .; KEEP(*(.fixup)) } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2; + __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; __fixup_entries = (. - _FIXUP_TABLE_) >> 2; .data : diff --git a/board/sbc8548/ddr.c b/board/sbc8548/ddr.c index ab64fa8..996ffe2 100644 --- a/board/sbc8548/ddr.c +++ b/board/sbc8548/ddr.c @@ -7,37 +7,10 @@ */ #include <common.h> -#include <i2c.h> #include <asm/fsl_ddr_sdram.h> #include <asm/fsl_ddr_dimm_params.h> -static void -get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address) -{ - i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr2_spd_eeprom_t)); -} - -unsigned int fsl_ddr_get_mem_data_rate(void) -{ - return get_ddr_freq(0); -} - -void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd, - unsigned int ctrl_num) -{ - unsigned int i; - - if (ctrl_num) { - printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num); - return; - } - - for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) { - get_spd(&(ctrl_dimms_spd[i]), SPD_EEPROM_ADDRESS); - } -} - void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, unsigned int ctrl_num) diff --git a/board/sbc8560/ddr.c b/board/sbc8560/ddr.c index 7850794..e9babc6 100644 --- a/board/sbc8560/ddr.c +++ b/board/sbc8560/ddr.c @@ -7,40 +7,10 @@ */ #include <common.h> -#include <i2c.h> #include <asm/fsl_ddr_sdram.h> #include <asm/fsl_ddr_dimm_params.h> -static void -get_spd(ddr1_spd_eeprom_t *spd, unsigned char i2c_address) -{ - i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr1_spd_eeprom_t)); -} - - -unsigned int -fsl_ddr_get_mem_data_rate(void) -{ - return get_ddr_freq(0); -} - - -void -fsl_ddr_get_spd(ddr1_spd_eeprom_t *ctrl_dimms_spd, - unsigned int ctrl_num) -{ - unsigned int i; - unsigned int i2c_address = 0; - - for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) { - if (ctrl_num == 0 && i == 0) { - i2c_address = SPD_EEPROM_ADDRESS; - } - get_spd(&(ctrl_dimms_spd[i]), i2c_address); - } -} - void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, unsigned int ctrl_num) diff --git a/board/sbc8641d/ddr.c b/board/sbc8641d/ddr.c index 23497f9..996ffe2 100644 --- a/board/sbc8641d/ddr.c +++ b/board/sbc8641d/ddr.c @@ -7,45 +7,10 @@ */ #include <common.h> -#include <i2c.h> #include <asm/fsl_ddr_sdram.h> #include <asm/fsl_ddr_dimm_params.h> -static void -get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address) -{ - i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr2_spd_eeprom_t)); -} - -unsigned int fsl_ddr_get_mem_data_rate(void) -{ - return get_bus_freq(0); -} - -void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd, - unsigned int ctrl_num) -{ - unsigned int i; - unsigned int i2c_address = 0; - - for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) { - if (ctrl_num == 0 && i == 0) { - i2c_address = SPD_EEPROM_ADDRESS1; - } - if (ctrl_num == 0 && i == 1) { - i2c_address = SPD_EEPROM_ADDRESS2; - } - if (ctrl_num == 1 && i == 0) { - i2c_address = SPD_EEPROM_ADDRESS3; - } - if (ctrl_num == 1 && i == 1) { - i2c_address = SPD_EEPROM_ADDRESS4; - } - get_spd(&(ctrl_dimms_spd[i]), i2c_address); - } -} - void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, unsigned int ctrl_num) diff --git a/board/sbc8641d/sbc8641d.c b/board/sbc8641d/sbc8641d.c index 5c30b26..dd58541 100644 --- a/board/sbc8641d/sbc8641d.c +++ b/board/sbc8641d/sbc8641d.c @@ -273,12 +273,3 @@ void board_reset(void) __asm__ __volatile__ ("rfi"); #endif } - -#ifdef CONFIG_MP -extern void cpu_mp_lmb_reserve(struct lmb *lmb); - -void board_lmb_reserve(struct lmb *lmb) -{ - cpu_mp_lmb_reserve(lmb); -} -#endif diff --git a/board/sc3/u-boot.lds b/board/sc3/u-boot.lds deleted file mode 100644 index 2cbbca5..0000000 --- a/board/sc3/u-boot.lds +++ /dev/null @@ -1,147 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - arch/powerpc/cpu/ppc4xx/start.o (.text) - board/sc3/init.o (.text) - arch/powerpc/cpu/ppc4xx/kgdb.o (.text) - arch/powerpc/cpu/ppc4xx/traps.o (.text) - arch/powerpc/cpu/ppc4xx/interrupts.o (.text) - arch/powerpc/cpu/ppc4xx/4xx_uart.o (.text) - arch/powerpc/cpu/ppc4xx/cpu_init.o (.text) - arch/powerpc/cpu/ppc4xx/speed.o (.text) - common/dlmalloc.o (.text) - lib/crc32.o (.text) - arch/powerpc/lib/extable.o (.text) - lib/zlib.o (.text) - -/* . = env_offset;*/ -/* common/env_embedded.o(.text)*/ - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - __bss_end__ = . ; - PROVIDE (end = .); -} diff --git a/board/siemens/IAD210/u-boot.lds b/board/siemens/IAD210/u-boot.lds index 725bef8..0e78e4f 100644 --- a/board/siemens/IAD210/u-boot.lds +++ b/board/siemens/IAD210/u-boot.lds @@ -56,13 +56,14 @@ SECTIONS PROVIDE (erotext = .); .reloc : { - KEEP(*(.got)) _GOT2_TABLE_ = .; KEEP(*(.got2)) + KEEP(*(.got)) + PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); _FIXUP_TABLE_ = .; KEEP(*(.fixup)) } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; __fixup_entries = (. - _FIXUP_TABLE_)>>2; .data : diff --git a/board/sixnet/u-boot.lds b/board/sixnet/u-boot.lds index 2711f2c..02d1980 100644 --- a/board/sixnet/u-boot.lds +++ b/board/sixnet/u-boot.lds @@ -47,13 +47,14 @@ SECTIONS PROVIDE (erotext = .); .reloc : { - KEEP(*(.got)) _GOT2_TABLE_ = .; KEEP(*(.got2)) + KEEP(*(.got)) + PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); _FIXUP_TABLE_ = .; KEEP(*(.fixup)) } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; __fixup_entries = (. - _FIXUP_TABLE_)>>2; .data : diff --git a/board/snmc/qs850/u-boot.lds b/board/snmc/qs850/u-boot.lds index 007ae00..9ab248a 100644 --- a/board/snmc/qs850/u-boot.lds +++ b/board/snmc/qs850/u-boot.lds @@ -50,13 +50,14 @@ SECTIONS PROVIDE (erotext = .); .reloc : { - KEEP(*(.got)) _GOT2_TABLE_ = .; KEEP(*(.got2)) + KEEP(*(.got)) + PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); _FIXUP_TABLE_ = .; KEEP(*(.fixup)) } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; __fixup_entries = (. - _FIXUP_TABLE_)>>2; .data : diff --git a/board/snmc/qs860t/u-boot.lds b/board/snmc/qs860t/u-boot.lds index 05cc233..d0b60cf 100644 --- a/board/snmc/qs860t/u-boot.lds +++ b/board/snmc/qs860t/u-boot.lds @@ -47,13 +47,14 @@ SECTIONS PROVIDE (erotext = .); .reloc : { - KEEP(*(.got)) _GOT2_TABLE_ = .; KEEP(*(.got2)) + KEEP(*(.got)) + PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); _FIXUP_TABLE_ = .; KEEP(*(.fixup)) } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; __fixup_entries = (. - _FIXUP_TABLE_)>>2; .data : diff --git a/board/socrates/ddr.c b/board/socrates/ddr.c index 2b62b84..e9db476 100644 --- a/board/socrates/ddr.c +++ b/board/socrates/ddr.c @@ -7,37 +7,10 @@ */ #include <common.h> -#include <i2c.h> #include <asm/fsl_ddr_sdram.h> #include <asm/fsl_ddr_dimm_params.h> -static void -get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address) -{ - i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr2_spd_eeprom_t)); -} - -unsigned int fsl_ddr_get_mem_data_rate(void) -{ - return get_ddr_freq(0); -} - -void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd, - unsigned int ctrl_num) -{ - unsigned int i; - - if (ctrl_num) { - printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num); - return; - } - - for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) { - get_spd(&(ctrl_dimms_spd[i]), SPD_EEPROM_ADDRESS); - } -} - void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, unsigned int ctrl_num) diff --git a/board/spc1920/u-boot.lds b/board/spc1920/u-boot.lds index 05cc233..d0b60cf 100644 --- a/board/spc1920/u-boot.lds +++ b/board/spc1920/u-boot.lds @@ -47,13 +47,14 @@ SECTIONS PROVIDE (erotext = .); .reloc : { - KEEP(*(.got)) _GOT2_TABLE_ = .; KEEP(*(.got2)) + KEEP(*(.got)) + PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); _FIXUP_TABLE_ = .; KEEP(*(.fixup)) } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; __fixup_entries = (. - _FIXUP_TABLE_)>>2; .data : diff --git a/board/spd8xx/u-boot.lds b/board/spd8xx/u-boot.lds index 796c283..950e1e6 100644 --- a/board/spd8xx/u-boot.lds +++ b/board/spd8xx/u-boot.lds @@ -57,13 +57,14 @@ SECTIONS PROVIDE (erotext = .); .reloc : { - KEEP(*(.got)) _GOT2_TABLE_ = .; KEEP(*(.got2)) + KEEP(*(.got)) + PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); _FIXUP_TABLE_ = .; KEEP(*(.fixup)) } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; __fixup_entries = (. - _FIXUP_TABLE_)>>2; .data : diff --git a/board/st/nhk8815/Makefile b/board/st/nhk8815/Makefile index 3f360dc..60b87b1 100644 --- a/board/st/nhk8815/Makefile +++ b/board/st/nhk8815/Makefile @@ -30,7 +30,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).o COBJS := nhk8815.o -SOBJS := platform.o +SOBJS := SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/st/nhk8815/nhk8815.c b/board/st/nhk8815/nhk8815.c index faef810..9b62011 100644 --- a/board/st/nhk8815/nhk8815.c +++ b/board/st/nhk8815/nhk8815.c @@ -82,13 +82,18 @@ int board_late_init(void) int dram_init(void) { - /* set dram bank start addr and size */ + gd->ram_size = get_ram_size(CONFIG_SYS_SDRAM_BASE, + CONFIG_SYS_SDRAM_SIZE); + return 0; +} + +void dram_init_banksize(void) +{ gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; gd->bd->bi_dram[1].start = PHYS_SDRAM_2; gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE; - return 0; } #ifdef CONFIG_CMD_NET diff --git a/board/st/nhk8815/platform.S b/board/st/nhk8815/platform.S deleted file mode 100644 index 2a67110..0000000 --- a/board/st/nhk8815/platform.S +++ /dev/null @@ -1,340 +0,0 @@ -/* - * Board specific setup info - * - * (C) Copyright 2005 - * STMicrolelctronics, <www.st.com> - * - * (C) Copyright 2004, ARM Ltd. - * Philippe Robin, <philippe.robin@arm.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <config.h> -#include <version.h> - -.globl lowlevel_init -lowlevel_init: - /* Jump to the flash address */ - ldr r0, =CFG_ONENAND_BASE - - /* - * Make it independent whether we boot from 0x0 or 0x30000000. - * Non-portable: it relies on the knowledge that ip has to be updated - */ - orr ip, ip, r0 /* adjust return address of cpu_init_crit */ - orr lr, lr, r0 /* adjust return address */ - orr pc, pc, r0 /* jump to the normal address */ - nop - - /* Initialize PLL, Remap clear, FSMC, MPMC here! */ - /* What about GPIO, CLCD and UART */ - - /* PLL Initialization */ - /* Prog the PLL1 @ 266 MHz ==> SDRAM Clock = 100.8 MHz */ - ldr r0, =NOMADIK_SRC_BASE - - ldr r1, =0x2B013502 - - str r1, [r0, #0x14] - - /* Used to set all the timers clock to 2.4MHZ */ - ldr r1, =0x2AAAA004 - str r1, [r0] - - ldr r1, =0x10000000 - str r1, [r0, #0x10] - - /* FSMC setup ---- */ - ldr r0, =NOMADIK_FSMC_BASE - - ldr r1, =0x10DB /* For 16-bit NOR flash */ - str r1, [r0, #0x08] - - ldr r1, =0x03333333 /* For 16-bit NOR flash */ - str r1, [r0, #0xc] - - /* oneNAND setting */ - ldr r1, =0x0000105B /* BCR0 Prog control register */ - str r1, [r0] - - ldr r1, =0x0A200551 /* BTR0 Prog timing register */ - str r1, [r0, #0x04] - - /* preload the instructions into icache */ - add r0, pc, #0x1F - bic r0, r0, #0x1F - mcr p15, 0, r0, c7, c13, 1 - add r0, r0, #0x20 - mcr p15, 0, r0, c7, c13, 1 - - /* Now Clear Remap */ - ldr r0, =NOMADIK_SRC_BASE - - ldr r1, =0x2004 - str r1, [r0] - - ldr r1, =0x10000000 - str r1, [r0, #0x10] - - ldr r0, =0x101E9000 - ldr r1, =0x2004 - str r1, [r0] - - ldr r0, =NOMADIK_SRC_BASE - ldr r1, =0x2104 - str r1, [r0] - - /* FSMC setup -- */ - mov r0, #(NOMADIK_FSMC_BASE & 0x10000000) - orr r0, r0, #(NOMADIK_FSMC_BASE & 0x0FFFFFFF) - - ldr r1, =0x10DB /* For 16-bit NOR flash */ - str r1, [r0, #0x8] - - ldr r1, =0x03333333 /* For 16-bit NOR flash */ - str r1, [r0, #0xc] - - /* MPMC Setup */ - ldr r0, =NOMADIK_MPMC_BASE - - ldr r1, =0xF00003 - str r1, [r0] /* Enable the MPMC and the DLL */ - - ldr r1, =0x183 - str r1, [r0, #0x20] - - ldr r2, =NOMADIK_PMU_BASE - - ldr r1, =0x1111 - str r1, [r2] - - ldr r1, =0x1111 /* Prog the, mand delay strategy */ - str r1, [r0, #0x28] - - ldr r1, =0x103 /* NOP ,mand */ - str r1, [r0, #0x20] - - /* FIXME -- Wait required here */ - - ldr r1, =0x103 /* PALL ,mand*/ - str r1, [r0, #0x20] - - ldr r1, =0x1 - str r1, [r0, #0x24] /* To do at least two auto-refresh */ - - /* FIXME -- Wait required here */ - - /* Auto-refresh period = 7.8us @ SDRAM Clock = 100.8 MHz */ - ldr r1, =0x31 - str r1, [r0, #0x24] - - /* Prog Little Endian, Not defined in 8800 board */ - ldr r1, =0x0 - str r1, [r0, #0x8] - - - ldr r1, =0x2 - str r1, [r0, #0x30] /* Prog tRP timing */ - - ldr r1, =0x4 /* Change for 8815 */ - str r1, [r0, #0x34] /* Prog tRAS timing */ - - ldr r1, =0xB - str r1, [r0, #0x38] /* Prog tSREX timing */ - - - ldr r1, =0x1 - str r1, [r0, #0x44] /* Prog tWR timing */ - - ldr r1, =0x8 - str r1, [r0, #0x48] /* Prog tRC timing */ - - ldr r1, =0xA - str r1, [r0, #0x4C] /* Prog tRFC timing */ - - ldr r1, =0xB - str r1, [r0, #0x50] /* Prog tXSR timing */ - - ldr r1, =0x1 - str r1, [r0, #0x54] /* Prog tRRD timing */ - - ldr r1, =0x1 - str r1, [r0, #0x58] /* Prog tMRD timing */ - - ldr r1, =0x1 - str r1, [r0, #0x5C] /* Prog tCDLR timing */ - - /* DDR-SDRAM MEMORY IS ON BANK0 8815 */ - ldr r1, =0x304 /* Prog RAS and CAS for CS 0 */ - str r1, [r0, #0x104] - - /* SDR-SDRAM MEMORY IS ON BANK1 8815 */ - ldr r1, =0x304 /* Prog RAS and CAS for CS 1 */ - str r1, [r0, #0x124] - /* THE DATA BUS WIDE IS PROGRAM FOR 16-BITS */ - /* DDR-SDRAM MEMORY IS ON BANK0*/ - - ldr r1, =0x884 /* 8815 : config reg in BRC for CS0 */ - str r1, [r0, #0x100] - - /*SDR-SDRAM MEMORY IS ON BANK1*/ - - ldr r1, =0x884 /* 8815 : config reg in BRC for CS1 */ - str r1, [r0, #0x120] - - ldr r1, =0x83 /*MODE Mand*/ - str r1, [r0, #0x20] - - /* LOAD MODE REGISTER FOR 2 bursts of 16b, with DDR mem ON BANK0 */ - - ldr r1, =0x62000 /*Data in*/ - ldr r1, [r1] - - /* LOAD MODE REGISTER FOR 2 bursts of 16b, with DDR mem ON BANK1 */ - - ldr r1, =0x8062000 - ldr r1, [r1] - - ldr r1, =0x003 - str r1, [r0, #0x20] - - /* ENABLE ALL THE BUFFER FOR EACH AHB PORT*/ - - ldr r1, =0x01 /* Enable buffer 0 */ - str r1, [r0, #0x400] - - ldr r1, =0x01 /* Enable buffer 1 */ - str r1, [r0, #0x420] - - ldr r1, =0x01 /* Enable buffer 2 */ - str r1, [r0, #0x440] - - ldr r1, =0x01 /* Enable buffer 3 */ - str r1, [r0, #0x460] - - ldr r1, =0x01 /* Enable buffer 4 */ - str r1, [r0, #0x480] - - ldr r1, =0x01 /* Enable buffer 5 */ - str r1, [r0, #0x4A0] - - /* GPIO settings */ - - ldr r0, =NOMADIK_GPIO1_BASE - - ldr r1, =0xC0600000 - str r1, [r0, #0x20] - - ldr r1, =0x3F9FFFFF /* ABHI change this for uart1 */ - str r1, [r0, #0x24] - - ldr r1, =0x3F9FFFFF /* ABHI change this for uart1 */ - str r1, [r0, #0x28] - - ldr r0, =NOMADIK_GPIO0_BASE - - ldr r1, =0xFFFFFFFF - str r1, [r0, #0x20] - - ldr r1, =0x00 - str r1, [r0, #0x24] - - ldr r1, =0x00 - str r1, [r0, #0x28] - - /* Configure CPLD_CTRL register for enabling MUX logic for UART0/UART2 */ - - ldr r0, =NOMADIK_FSMC_BASE - - ldr r1, =0x10DB /* INIT FSMC bank 0 */ - str r1, [r0, #0x00] - - ldr r1, =0x0FFFFFFF - str r1, [r0, #0x04] - - ldr r1, =0x010DB /* INIT FSMC bank 1 */ - str r1, [r0, #0x08] - - ldr r1, =0x00FFFFFFF - str r1, [r0, #0x0C] - - ldr r0, =NOMADIK_UART0_BASE - - ldr r1, =0x00000000 - str r1, [r0, #0x30] - - ldr r1, =0x0000004e - str r1, [r0, #0x24] - - ldr r1, =0x00000008 - str r1, [r0, #0x28] - - ldr r1, =0x00000060 - str r1, [r0, #0x2C] - - ldr r1, =0x00000301 - str r1, [r0, #0x30] - - ldr r1, =0x00000066 - str r1, [r0] - - ldr r0, =NOMADIK_UART1_BASE - - ldr r1, =0x00000000 - str r1, [r0, #0x30] - - ldr r1, =0x0000004e - str r1, [r0, #0x24] - - ldr r1, =0x00000008 - str r1, [r0, #0x28] - - ldr r1, =0x00000060 - str r1, [r0, #0x2C] - - ldr r1, =0x00000301 - str r1, [r0, #0x30] - - ldr r1, =0x00000066 - str r1, [r0] - - ldr r0, =NOMADIK_UART2_BASE - - ldr r1, =0x00000000 - str r1, [r0, #0x30] - - ldr r1, =0x0000004e - str r1, [r0, #0x24] - - ldr r1, =0x00000008 - str r1, [r0, #0x28] - - ldr r1, =0x00000060 - str r1, [r0, #0x2C] - - ldr r1, =0x00000301 - str r1, [r0, #0x30] - - ldr r1, =0x00000066 - str r1, [r0] - - /* Configure CPLD to enable UART0 */ - - mov pc, lr diff --git a/board/stx/stxgp3/ddr.c b/board/stx/stxgp3/ddr.c index 93d1100..5711374 100644 --- a/board/stx/stxgp3/ddr.c +++ b/board/stx/stxgp3/ddr.c @@ -7,40 +7,10 @@ */ #include <common.h> -#include <i2c.h> #include <asm/fsl_ddr_sdram.h> #include <asm/fsl_ddr_dimm_params.h> -static void -get_spd(ddr1_spd_eeprom_t *spd, unsigned char i2c_address) -{ - i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr1_spd_eeprom_t)); -} - - -unsigned int -fsl_ddr_get_mem_data_rate(void) -{ - return get_ddr_freq(0); -} - - -void -fsl_ddr_get_spd(ddr1_spd_eeprom_t *ctrl_dimms_spd, - unsigned int ctrl_num) -{ - unsigned int i; - unsigned int i2c_address = 0; - - for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) { - if (ctrl_num == 0 && i == 0) { - i2c_address = SPD_EEPROM_ADDRESS; - } - get_spd(&(ctrl_dimms_spd[i]), i2c_address); - } -} - void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, unsigned int ctrl_num) diff --git a/board/stx/stxssa/ddr.c b/board/stx/stxssa/ddr.c index 93d1100..56c87b2 100644 --- a/board/stx/stxssa/ddr.c +++ b/board/stx/stxssa/ddr.c @@ -12,35 +12,6 @@ #include <asm/fsl_ddr_sdram.h> #include <asm/fsl_ddr_dimm_params.h> -static void -get_spd(ddr1_spd_eeprom_t *spd, unsigned char i2c_address) -{ - i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr1_spd_eeprom_t)); -} - - -unsigned int -fsl_ddr_get_mem_data_rate(void) -{ - return get_ddr_freq(0); -} - - -void -fsl_ddr_get_spd(ddr1_spd_eeprom_t *ctrl_dimms_spd, - unsigned int ctrl_num) -{ - unsigned int i; - unsigned int i2c_address = 0; - - for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) { - if (ctrl_num == 0 && i == 0) { - i2c_address = SPD_EEPROM_ADDRESS; - } - get_spd(&(ctrl_dimms_spd[i]), i2c_address); - } -} - void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, unsigned int ctrl_num) diff --git a/board/stx/stxxtc/u-boot.lds b/board/stx/stxxtc/u-boot.lds index b7b6c1a..a949e4f 100644 --- a/board/stx/stxxtc/u-boot.lds +++ b/board/stx/stxxtc/u-boot.lds @@ -47,13 +47,14 @@ SECTIONS PROVIDE (erotext = .); .reloc : { - KEEP(*(.got)) _GOT2_TABLE_ = .; KEEP(*(.got2)) + KEEP(*(.got)) + PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); _FIXUP_TABLE_ = .; KEEP(*(.fixup)) } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; __fixup_entries = (. - _FIXUP_TABLE_)>>2; .data : diff --git a/board/svm_sc8xx/u-boot.lds b/board/svm_sc8xx/u-boot.lds index c4ce968..c65f022 100644 --- a/board/svm_sc8xx/u-boot.lds +++ b/board/svm_sc8xx/u-boot.lds @@ -63,13 +63,14 @@ SECTIONS PROVIDE (erotext = .); .reloc : { - KEEP(*(.got)) _GOT2_TABLE_ = .; KEEP(*(.got2)) + KEEP(*(.got)) + PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); _FIXUP_TABLE_ = .; KEEP(*(.fixup)) } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; __fixup_entries = (. - _FIXUP_TABLE_)>>2; .data : diff --git a/board/tcm-bf518/config.mk b/board/tcm-bf518/config.mk index 9a54dbf..799a682 100644 --- a/board/tcm-bf518/config.mk +++ b/board/tcm-bf518/config.mk @@ -23,13 +23,5 @@ # MA 02111-1307 USA # -# This is not actually used for Blackfin boards so do not change it -#CONFIG_SYS_TEXT_BASE = do-not-use-me - -CONFIG_BFIN_CPU = bf518-0.0 - CFLAGS_lib += -O2 CFLAGS_lib/lzma += -O2 - -# Set some default LDR flags based on boot mode. -LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE)) diff --git a/board/tcm-bf537/config.mk b/board/tcm-bf537/config.mk index c5d45c7..c0cb9ff 100644 --- a/board/tcm-bf537/config.mk +++ b/board/tcm-bf537/config.mk @@ -23,14 +23,8 @@ # MA 02111-1307 USA # -# This is not actually used for Blackfin boards so do not change it -#CONFIG_SYS_TEXT_BASE = do-not-use-me - -CONFIG_BFIN_CPU = bf537-0.2 - CFLAGS_lib += -O2 CFLAGS_lib/lzma += -O2 # Set some default LDR flags based on boot mode. LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8 -LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE)) diff --git a/board/ti/am3517crane/Makefile b/board/ti/am3517crane/Makefile new file mode 100644 index 0000000..1fe2bca --- /dev/null +++ b/board/ti/am3517crane/Makefile @@ -0,0 +1,46 @@ +# +# Author: Srinath R <srinath@mistralsolutions.com> +# +# Based on logicpd/am3517evm/Makefile +# +# Copyright (C) 2011 Mistral Solutions Pvt Ltd +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +COBJS := am3517crane.o + +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +clean: + rm -f $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend diff --git a/board/ti/am3517crane/am3517crane.c b/board/ti/am3517crane/am3517crane.c new file mode 100644 index 0000000..d007044 --- /dev/null +++ b/board/ti/am3517crane/am3517crane.c @@ -0,0 +1,75 @@ +/* + * am3517crane.c - board file for AM3517 CraneBoard + * + * Author: Srinath.R <srinath@mistralsolutions.com> + * + * Based on logicpd/am3517evm/am3517evm.c + * + * Copyright (C) 2011 Mistral Solutions Pvt Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/mem.h> +#include <asm/arch/mux.h> +#include <asm/arch/sys_proto.h> +#include <asm/mach-types.h> +#include <i2c.h> +#include "am3517crane.h" + +DECLARE_GLOBAL_DATA_PTR; + +/* + * Routine: board_init + * Description: Early hardware init. + */ +int board_init(void) +{ + gpmc_init(); /* in SRAM or SDRAM, finish GPMC */ + /* board id for Linux */ + gd->bd->bi_arch_number = MACH_TYPE_CRANEBOARD; + /* boot param addr */ + gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100); + + return 0; +} + +/* + * Routine: misc_init_r + * Description: Init i2c, ethernet, etc... (done here so udelay works) + */ +int misc_init_r(void) +{ +#ifdef CONFIG_DRIVER_OMAP34XX_I2C + i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); +#endif + + dieid_num_r(); + + return 0; +} + +/* + * Routine: set_muxconf_regs + * Description: Setting up the configuration Mux registers specific to the + * hardware. Many pins need to be moved from protect to primary + * mode. + */ +void set_muxconf_regs(void) +{ + MUX_AM3517CRANE(); +} diff --git a/board/ti/am3517crane/am3517crane.h b/board/ti/am3517crane/am3517crane.h new file mode 100644 index 0000000..41db972 --- /dev/null +++ b/board/ti/am3517crane/am3517crane.h @@ -0,0 +1,395 @@ +/* + * am3517crane.h - Header file for the AM3517 CraneBoard. + * + * Author: Srinath R <srinath@mistralsolutions.com> + * + * Based on logicpd/am3517evm/am3517evm.h + * + * Copyright (C) 2011 Mistral Solutions Pvt Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _AM3517CRANE_H_ +#define _AM3517CRANE_H_ + +const omap3_sysinfo sysinfo = { + DDR_DISCRETE, + "CraneBoard", + "NAND", +}; +/* AM3517 specific mux configuration */ +#define CONTROL_PADCONF_SYS_NRESWARM 0x0A08 +/* CCDC */ +#define CONTROL_PADCONF_CCDC_PCLK 0x01E4 +#define CONTROL_PADCONF_CCDC_FIELD 0x01E6 +#define CONTROL_PADCONF_CCDC_HD 0x01E8 +#define CONTROL_PADCONF_CCDC_VD 0x01EA +#define CONTROL_PADCONF_CCDC_WEN 0x01EC +#define CONTROL_PADCONF_CCDC_DATA0 0x01EE +#define CONTROL_PADCONF_CCDC_DATA1 0x01F0 +#define CONTROL_PADCONF_CCDC_DATA2 0x01F2 +#define CONTROL_PADCONF_CCDC_DATA3 0x01F4 +#define CONTROL_PADCONF_CCDC_DATA4 0x01F6 +#define CONTROL_PADCONF_CCDC_DATA5 0x01F8 +#define CONTROL_PADCONF_CCDC_DATA6 0x01FA +#define CONTROL_PADCONF_CCDC_DATA7 0x01FC +/* RMII */ +#define CONTROL_PADCONF_RMII_MDIO_DATA 0x01FE +#define CONTROL_PADCONF_RMII_MDIO_CLK 0x0200 +#define CONTROL_PADCONF_RMII_RXD0 0x0202 +#define CONTROL_PADCONF_RMII_RXD1 0x0204 +#define CONTROL_PADCONF_RMII_CRS_DV 0x0206 +#define CONTROL_PADCONF_RMII_RXER 0x0208 +#define CONTROL_PADCONF_RMII_TXD0 0x020A +#define CONTROL_PADCONF_RMII_TXD1 0x020C +#define CONTROL_PADCONF_RMII_TXEN 0x020E +#define CONTROL_PADCONF_RMII_50MHZ_CLK 0x0210 +#define CONTROL_PADCONF_USB0_DRVBUS 0x0212 +/* CAN */ +#define CONTROL_PADCONF_HECC1_TXD 0x0214 +#define CONTROL_PADCONF_HECC1_RXD 0x0216 +#define CONTROL_PADCONF_SYS_BOOT7 0x0218 +#define CONTROL_PADCONF_SDRC_DQS0N 0x021A +#define CONTROL_PADCONF_SDRC_DQS1N 0x021C +#define CONTROL_PADCONF_SDRC_DQS2N 0x021E +#define CONTROL_PADCONF_SDRC_DQS3N 0x0220 +#define CONTROL_PADCONF_STRBEN_DLY0 0x0222 +#define CONTROL_PADCONF_STRBEN_DLY1 0x0224 +#define CONTROL_PADCONF_SYS_BOOT8 0x0226 + +/* + * IEN - Input Enable + * IDIS - Input Disable + * PTD - Pull type Down + * PTU - Pull type Up + * DIS - Pull type selection is inactive + * EN - Pull type selection is active + * M0 - Mode 0 + * The commented string gives the final mux configuration for that pin + */ +#define MUX_AM3517CRANE()\ + /*SDRC*/\ + MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_CKE0), (M0))\ + MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_DQS0N), (IEN | PTD | EN | M0))\ + MUX_VAL(CP(SDRC_DQS1N), (IEN | PTD | EN | M0))\ + MUX_VAL(CP(SDRC_DQS2N), (IEN | PTD | EN | M0))\ + MUX_VAL(CP(SDRC_DQS3N), (IEN | PTD | EN | M0))\ + MUX_VAL(CP(SDRC_CKE0), (M0))\ + MUX_VAL(CP(SDRC_CKE1), (M0))\ + /*sdrc_strben_dly0*/\ + MUX_VAL(CP(STRBEN_DLY0), (IEN | PTD | EN | M0))\ + /*sdrc_strben_dly1*/\ + MUX_VAL(CP(STRBEN_DLY1), (IEN | PTD | EN | M0))\ + /*GPMC*/\ + MUX_VAL(CP(GPMC_A1), (M7))\ + MUX_VAL(CP(GPMC_A2), (IDIS | PTU | DIS | M4))\ + MUX_VAL(CP(GPMC_A3), (IDIS | PTU | EN | M4))\ + MUX_VAL(CP(GPMC_A4), (IDIS | PTU | EN | M4))\ + MUX_VAL(CP(GPMC_A5), (IDIS | PTU | EN | M4))\ + MUX_VAL(CP(GPMC_A6), (M7))\ + MUX_VAL(CP(GPMC_A7), (IDIS | PTU | EN | M4))\ + MUX_VAL(CP(GPMC_A8), (IEN | PTU | EN | M4))\ + MUX_VAL(CP(GPMC_A9), (M7))\ + MUX_VAL(CP(GPMC_A10), (M7))\ + MUX_VAL(CP(GPMC_D0), (IEN | PTU | EN | M0))\ + MUX_VAL(CP(GPMC_D1), (IEN | PTU | EN | M0))\ + MUX_VAL(CP(GPMC_D2), (IEN | PTU | EN | M0))\ + MUX_VAL(CP(GPMC_D3), (IEN | PTU | EN | M0))\ + MUX_VAL(CP(GPMC_D4), (IEN | PTU | EN | M0))\ + MUX_VAL(CP(GPMC_D5), (IEN | PTU | EN | M0))\ + MUX_VAL(CP(GPMC_D6), (IEN | PTU | EN | M0))\ + MUX_VAL(CP(GPMC_D7), (IEN | PTU | EN | M0))\ + MUX_VAL(CP(GPMC_D8), (IEN | PTU | EN | M0))\ + MUX_VAL(CP(GPMC_D9), (IEN | PTU | EN | M0))\ + MUX_VAL(CP(GPMC_D10), (IEN | PTU | EN | M0))\ + MUX_VAL(CP(GPMC_D11), (IEN | PTU | EN | M0))\ + MUX_VAL(CP(GPMC_D12), (IEN | PTU | EN | M0))\ + MUX_VAL(CP(GPMC_D13), (IEN | PTU | EN | M0))\ + MUX_VAL(CP(GPMC_D14), (IEN | PTU | EN | M0))\ + MUX_VAL(CP(GPMC_D15), (IEN | PTU | EN | M0))\ + MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0))\ + MUX_VAL(CP(GPMC_NCS1), (IDIS | PTU | EN | M4))\ + MUX_VAL(CP(GPMC_NCS2), (M7))\ + MUX_VAL(CP(GPMC_NCS3), (M7))\ + MUX_VAL(CP(GPMC_NCS4), (M7))\ + MUX_VAL(CP(GPMC_NCS5), (M7))\ + MUX_VAL(CP(GPMC_NCS6), (M7))\ + MUX_VAL(CP(GPMC_NCS7), (M7))\ + MUX_VAL(CP(GPMC_CLK), (IDIS | PTU | EN | M0))/*TP*/\ + MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTU | EN | M0))\ + MUX_VAL(CP(GPMC_NBE1), (M7))\ + MUX_VAL(CP(GPMC_NWP), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(GPMC_WAIT0), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(GPMC_WAIT1), (M7))\ + MUX_VAL(CP(GPMC_WAIT2), (M7))\ + MUX_VAL(CP(GPMC_WAIT3), (IDIS | PTU | EN | M4))/*GPIO_65*/\ + /*DSS*/\ + MUX_VAL(CP(DSS_PCLK), (IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(DSS_VSYNC), (IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(DSS_ACBIAS), (IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(DSS_DATA0), (IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(DSS_DATA1), (IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(DSS_DATA2), (IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(DSS_DATA3), (IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(DSS_DATA4), (IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(DSS_DATA5), (IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(DSS_DATA6), (IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(DSS_DATA7), (IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(DSS_DATA8), (IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(DSS_DATA9), (IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(DSS_DATA10), (IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(DSS_DATA11), (IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(DSS_DATA12), (IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(DSS_DATA13), (IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(DSS_DATA14), (IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(DSS_DATA15), (IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(DSS_DATA16), (IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(DSS_DATA17), (IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0))\ + /*MMC1*/\ + MUX_VAL(CP(MMC1_CLK), (IEN | PTU | EN | M0))\ + MUX_VAL(CP(MMC1_CMD), (IEN | PTU | DIS | M0))\ + MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | DIS | M0))\ + MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | DIS | M0))\ + MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | DIS | M0))\ + MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | DIS | M0))\ + MUX_VAL(CP(MMC1_DAT4), (IEN | PTU | DIS | M0))\ + MUX_VAL(CP(MMC1_DAT5), (IEN | PTU | DIS | M0))\ + MUX_VAL(CP(MMC1_DAT6), (IEN | PTU | DIS | M0))\ + MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | DIS | M0))\ + /*MMC2*/\ + MUX_VAL(CP(MMC2_CLK), (IEN | PTD | EN | M0))\ + MUX_VAL(CP(MMC2_CMD), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(MMC2_DAT0), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(MMC2_DAT1), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(MMC2_DAT2), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(MMC2_DAT3), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(MMC2_DAT4), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(MMC2_DAT5), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(MMC2_DAT6), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(MMC2_DAT7), (IEN | PTD | DIS | M0))\ + /*McBSP*/\ + MUX_VAL(CP(MCBSP_CLKS), (IEN | PTU | DIS | M0))\ + MUX_VAL(CP(MCBSP1_CLKR), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(MCBSP1_FSR), (IDIS | PTU | EN | M0))\ + MUX_VAL(CP(MCBSP1_DX), (IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(MCBSP1_DR), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(MCBSP1_FSX), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(MCBSP1_CLKX), (IEN | PTD | DIS | M0))\ + \ + MUX_VAL(CP(MCBSP2_FSX), (M7))\ + MUX_VAL(CP(MCBSP2_CLKX), (M7))\ + MUX_VAL(CP(MCBSP2_DR), (M7))\ + MUX_VAL(CP(MCBSP2_DX), (M7))\ + \ + MUX_VAL(CP(MCBSP3_DX), (IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(MCBSP3_DR), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(MCBSP3_CLKX), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(MCBSP3_FSX), (IEN | PTD | DIS | M0))\ + \ + MUX_VAL(CP(MCBSP4_CLKX), (M7))\ + MUX_VAL(CP(MCBSP4_DR), (M7))\ + MUX_VAL(CP(MCBSP4_DX), (M7))\ + MUX_VAL(CP(MCBSP4_FSX), (M7))\ + /*UART*/\ + MUX_VAL(CP(UART1_TX), (M7))\ + MUX_VAL(CP(UART1_RTS), (M7))\ + MUX_VAL(CP(UART1_CTS), (M7))\ + MUX_VAL(CP(UART1_RX), (M7))\ + \ + MUX_VAL(CP(UART2_CTS), (M7))\ + MUX_VAL(CP(UART2_RTS), (M7))\ + MUX_VAL(CP(UART2_TX), (M7))\ + MUX_VAL(CP(UART2_RX), (M7))\ + \ + MUX_VAL(CP(UART3_CTS_RCTX), (IEN | PTU | DIS | M0))\ + MUX_VAL(CP(UART3_RTS_SD), (IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0))\ + /*I2C 1, 2, 3*/\ + MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0))\ + MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0))\ + MUX_VAL(CP(I2C2_SCL), (IEN | PTU | EN | M0))\ + MUX_VAL(CP(I2C2_SDA), (IEN | PTU | EN | M0))\ + MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0))\ + MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0))\ + /*McSPI*/\ + MUX_VAL(CP(MCSPI1_CLK), (IEN | PTU | EN | M4))/*GPIO_171 TP*/\ + MUX_VAL(CP(MCSPI1_SIMO), (IEN | PTU | EN | M4))/*GPIO_172 TP*/\ + MUX_VAL(CP(MCSPI1_SOMI), (IEN | PTU | EN | M4))/*GPIO_173 TP*/\ + MUX_VAL(CP(MCSPI1_CS0), (IEN | PTU | EN | M4))/*GPIO_174 TP*/\ + MUX_VAL(CP(MCSPI1_CS1), (IEN | PTU | EN | M4))/*GPIO_175 TP*/\ + MUX_VAL(CP(MCSPI1_CS2), (IEN | PTU | EN | M4))/*GPIO_176 TP*/\ + MUX_VAL(CP(MCSPI1_CS3), (IEN | PTD | EN | M4))/*GPIO_176 TP*/\ + \ + MUX_VAL(CP(MCSPI2_CLK), (M7))\ + MUX_VAL(CP(MCSPI2_SIMO), (M7))\ + MUX_VAL(CP(MCSPI2_SOMI), (M7))\ + MUX_VAL(CP(MCSPI2_CS0), (M7))\ + MUX_VAL(CP(MCSPI2_CS1), (M7))\ + /*CCDC*/\ + MUX_VAL(CP(CCDC_PCLK), (IEN | PTU | EN | M0))\ + MUX_VAL(CP(CCDC_FIELD), (IEN | PTD | DIS | M1))/*CCDC_DATA8*/\ + MUX_VAL(CP(CCDC_HD), (IEN | PTU | EN | M0))\ + MUX_VAL(CP(CCDC_VD), (IEN | PTU | EN | M0))\ + MUX_VAL(CP(CCDC_WEN), (IEN | PTD | DIS | M1))/*CCDC_DATA9 */\ + MUX_VAL(CP(CCDC_DATA0), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(CCDC_DATA1), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(CCDC_DATA2), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(CCDC_DATA3), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(CCDC_DATA4), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(CCDC_DATA5), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(CCDC_DATA6), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(CCDC_DATA7), (IEN | PTD | DIS | M0))\ + /*RMII*/\ + MUX_VAL(CP(RMII_MDIO_DATA), (IEN | M0))\ + MUX_VAL(CP(RMII_MDIO_CLK), (M0))\ + MUX_VAL(CP(RMII_RXD0), (IEN | PTD | M0))\ + MUX_VAL(CP(RMII_RXD1), (IEN | PTD | M0))\ + MUX_VAL(CP(RMII_CRS_DV), (IEN | PTD | M0))\ + MUX_VAL(CP(RMII_RXER), (PTD | M0))\ + MUX_VAL(CP(RMII_TXD0), (PTD | M0))\ + MUX_VAL(CP(RMII_TXD1), (PTD | M0))\ + MUX_VAL(CP(RMII_TXEN), (PTD | M0))\ + MUX_VAL(CP(RMII_50MHZ_CLK), (IEN | PTD | EN | M0))\ + /*HECC*/\ + MUX_VAL(CP(HECC1_TXD), (IEN | PTU | EN | M0))\ + MUX_VAL(CP(HECC1_RXD), (IEN | PTU | EN | M0))\ + /*HSUSB*/\ + MUX_VAL(CP(USB0_DRVBUS), (IEN | PTD | EN | M0))\ + /*HDQ*/\ + MUX_VAL(CP(HDQ_SIO), (IEN | PTU | EN | M4))\ + /*Control and debug*/\ + MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SYS_CLKREQ), (IEN | PTD | DIS | M4))/*GPIO_1 TPS_SLEEP*/\ + MUX_VAL(CP(SYS_NIRQ), (IEN | PTU | EN | M0))\ + /*SYS_nRESWARM*/\ + MUX_VAL(CP(SYS_NRESWARM), (IEN | PTU | EN | M0))/*GPIO_30 ToExp*/\ + MUX_VAL(CP(SYS_BOOT1), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SYS_BOOT3), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SYS_BOOT4), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SYS_BOOT6), (IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(SYS_BOOT7), (IEN | PTD | EN | M0))\ + MUX_VAL(CP(SYS_BOOT8), (IEN | PTD | EN | M0))\ + MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M4))/*GPIO_10 TP*/\ + MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M0))\ + /*JTAG*/\ + MUX_VAL(CP(JTAG_nTRST), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(JTAG_TDI), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(JTAG_EMU0), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(JTAG_EMU1), (IEN | PTD | DIS | M0))\ + /*ETK (ES2 onwards)*/\ + MUX_VAL(CP(ETK_CLK_ES2), (IEN | PTU | EN | M3))\ + MUX_VAL(CP(ETK_CTL_ES2), (IDIS | PTD | DIS | M3))\ + MUX_VAL(CP(ETK_D0_ES2), (IEN | PTD | DIS | M3))\ + MUX_VAL(CP(ETK_D1_ES2), (IEN | PTD | DIS | M3))\ + MUX_VAL(CP(ETK_D2_ES2), (IEN | PTD | EN | M3))\ + MUX_VAL(CP(ETK_D3_ES2), (IEN | PTD | DIS | M3))\ + MUX_VAL(CP(ETK_D4_ES2), (IEN | PTD | DIS | M3))\ + MUX_VAL(CP(ETK_D5_ES2), (IEN | PTD | DIS | M3))\ + MUX_VAL(CP(ETK_D6_ES2), (IEN | PTD | DIS | M3))\ + MUX_VAL(CP(ETK_D7_ES2), (IEN | PTD | DIS | M3))\ + MUX_VAL(CP(ETK_D8_ES2), (IEN | PTD | DIS | M3))\ + MUX_VAL(CP(ETK_D9_ES2), (IEN | PTD | DIS | M3))\ + MUX_VAL(CP(ETK_D10_ES2), (M7))\ + MUX_VAL(CP(ETK_D11_ES2), (M7))\ + MUX_VAL(CP(ETK_D12_ES2), (M7))\ + MUX_VAL(CP(ETK_D13_ES2), (M7))\ + MUX_VAL(CP(ETK_D14_ES2), (M7))\ + MUX_VAL(CP(ETK_D15_ES2), (M7))\ + /*Die to Die*/\ + MUX_VAL(CP(D2D_MCAD34), (IEN | PTD | EN | M0))\ + MUX_VAL(CP(D2D_MCAD35), (IEN | PTD | EN | M0))\ + MUX_VAL(CP(D2D_MCAD36), (IEN | PTD | EN | M0))\ + MUX_VAL(CP(D2D_CLK26MI), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(D2D_NRESPWRON), (IEN | PTD | EN | M0))\ + MUX_VAL(CP(D2D_NRESWARM), (IEN | PTU | EN | M0))\ + MUX_VAL(CP(D2D_ARM9NIRQ), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(D2D_UMA2P6FIQ), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(D2D_SPINT), (IEN | PTD | EN | M0))\ + MUX_VAL(CP(D2D_FRINT), (IEN | PTD | EN | M0))\ + MUX_VAL(CP(D2D_DMAREQ0), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(D2D_DMAREQ1), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(D2D_DMAREQ2), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(D2D_DMAREQ3), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(D2D_N3GTRST), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(D2D_N3GTDI), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(D2D_N3GTDO), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(D2D_N3GTMS), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(D2D_N3GTCK), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(D2D_N3GRTCK), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(D2D_MSTDBY), (IEN | PTU | EN | M0))\ + MUX_VAL(CP(D2D_SWAKEUP), (IEN | PTD | EN | M0))\ + MUX_VAL(CP(D2D_IDLEREQ), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(D2D_IDLEACK), (IEN | PTU | EN | M0))\ + MUX_VAL(CP(D2D_MWRITE), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(D2D_SWRITE), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(D2D_MREAD), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(D2D_SREAD), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(D2D_MBUSFLAG), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(D2D_SBUSFLAG), (IEN | PTD | DIS | M0))\ + +#endif /* _AM3517CRANE_H_ */ diff --git a/board/ti/am3517crane/config.mk b/board/ti/am3517crane/config.mk new file mode 100644 index 0000000..c6a18b5 --- /dev/null +++ b/board/ti/am3517crane/config.mk @@ -0,0 +1,29 @@ +# +# Author: Srinath R <srinath@mistralsolutions.com> +# +# Based on logicpd/am3517evm/config.mk +# +# Copyright (C) 2011 Mistral Solutions Pvt Ltd +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +# +# Physical Address: +# 8000'0000 (bank0) +# A000/0000 (bank1) +# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000 +# (mem base + reserved) + +# For use with external or internal boots. +CONFIG_SYS_TEXT_BASE = 0x80008000 diff --git a/board/ti/beagle/Makefile b/board/ti/beagle/Makefile index 3b4aaac..d9f445f 100644 --- a/board/ti/beagle/Makefile +++ b/board/ti/beagle/Makefile @@ -25,8 +25,10 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).o -COBJS := beagle.o +COBJS-y := $(BOARD).o +COBJS-$(CONFIG_STATUS_LED) += led.o +COBJS := $(sort $(COBJS-y)) SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c index c066d6e..4e194a2 100644 --- a/board/ti/beagle/beagle.c +++ b/board/ti/beagle/beagle.c @@ -30,6 +30,9 @@ * MA 02111-1307 USA */ #include <common.h> +#ifdef CONFIG_STATUS_LED +#include <status_led.h> +#endif #include <twl4030.h> #include <asm/io.h> #include <asm/arch/mmc_host_def.h> @@ -37,8 +40,19 @@ #include <asm/arch/sys_proto.h> #include <asm/arch/gpio.h> #include <asm/mach-types.h> +#ifdef CONFIG_USB_EHCI +#include <usb.h> +#include <asm/arch/clocks.h> +#include <asm/arch/clocks_omap3.h> +#include <asm/arch/ehci_omap3.h> +/* from drivers/usb/host/ehci-core.h */ +extern struct ehci_hccr *hccr; +extern volatile struct ehci_hcor *hcor; +#endif #include "beagle.h" +#define pr_debug(fmt, args...) debug(fmt, ##args) + #define TWL4030_I2C_BUS 0 #define EXPANSION_EEPROM_I2C_BUS 1 #define EXPANSION_EEPROM_I2C_ADDRESS 0x50 @@ -48,7 +62,12 @@ #define TINCANTOOLS_TRAINER 0x04000100 #define TINCANTOOLS_SHOWDOG 0x03000100 #define KBADC_BEAGLEFPGA 0x01000600 - +#define LW_BEAGLETOUCH 0x01000700 +#define BRAINMUX_LCDOG 0x01000800 +#define BRAINMUX_LCDOGTOUCH 0x02000800 +#define BBTOYS_WIFI 0x01000B00 +#define BBTOYS_VGA 0x02000B00 +#define BBTOYS_LCD 0x03000B00 #define BEAGLE_NO_EEPROM 0xffffffff DECLARE_GLOBAL_DATA_PTR; @@ -74,6 +93,10 @@ int board_init(void) /* boot param addr */ gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100); +#if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT) + status_led_set (STATUS_LED_BOOT, STATUS_LED_ON); +#endif + return 0; } @@ -148,23 +171,24 @@ int misc_init_r(void) { struct gpio *gpio5_base = (struct gpio *)OMAP34XX_GPIO5_BASE; struct gpio *gpio6_base = (struct gpio *)OMAP34XX_GPIO6_BASE; + struct control_prog_io *prog_io_base = (struct gpio *)OMAP34XX_CTRL_BASE; + + /* Enable i2c2 pullup resisters */ + writel(~(PRG_I2C2_PULLUPRESX), &prog_io_base->io1); switch (get_board_revision()) { case REVISION_AXBX: printf("Beagle Rev Ax/Bx\n"); setenv("beaglerev", "AxBx"); - setenv("mpurate", "600"); break; case REVISION_CX: printf("Beagle Rev C1/C2/C3\n"); setenv("beaglerev", "Cx"); - setenv("mpurate", "600"); MUX_BEAGLE_C(); break; case REVISION_C4: printf("Beagle Rev C4\n"); setenv("beaglerev", "C4"); - setenv("mpurate", "720"); MUX_BEAGLE_C(); /* Set VAUX2 to 1.8V for EHCI PHY */ twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED, @@ -172,10 +196,19 @@ int misc_init_r(void) TWL4030_PM_RECEIVER_VAUX2_DEV_GRP, TWL4030_PM_RECEIVER_DEV_GRP_P1); break; - case REVISION_XM: + case REVISION_XM_A: printf("Beagle xM Rev A\n"); setenv("beaglerev", "xMA"); - setenv("mpurate", "1000"); + MUX_BEAGLE_XM(); + /* Set VAUX2 to 1.8V for EHCI PHY */ + twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED, + TWL4030_PM_RECEIVER_VAUX2_VSEL_18, + TWL4030_PM_RECEIVER_VAUX2_DEV_GRP, + TWL4030_PM_RECEIVER_DEV_GRP_P1); + break; + case REVISION_XM_B: + printf("Beagle xM Rev B\n"); + setenv("beaglerev", "xMB"); MUX_BEAGLE_XM(); /* Set VAUX2 to 1.8V for EHCI PHY */ twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED, @@ -185,6 +218,12 @@ int misc_init_r(void) break; default: printf("Beagle unknown 0x%02x\n", get_board_revision()); + MUX_BEAGLE_XM(); + /* Set VAUX2 to 1.8V for EHCI PHY */ + twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED, + TWL4030_PM_RECEIVER_VAUX2_VSEL_18, + TWL4030_PM_RECEIVER_VAUX2_DEV_GRP, + TWL4030_PM_RECEIVER_DEV_GRP_P1); } switch (get_expansion_id()) { @@ -223,6 +262,29 @@ int misc_init_r(void) MUX_KBADC_BEAGLEFPGA(); setenv("buddy", "beaglefpga"); break; + case LW_BEAGLETOUCH: + printf("Recognized Liquidware BeagleTouch board\n"); + setenv("buddy", "beagletouch"); + break; + case BRAINMUX_LCDOG: + printf("Recognized Brainmux LCDog board\n"); + setenv("buddy", "lcdog"); + break; + case BRAINMUX_LCDOGTOUCH: + printf("Recognized Brainmux LCDog Touch board\n"); + setenv("buddy", "lcdogtouch"); + break; + case BBTOYS_WIFI: + printf("Recognized BeagleBoardToys WiFi board\n"); + MUX_BBTOYS_WIFI() + setenv("buddy", "bbtoys-wifi"); + break;; + case BBTOYS_VGA: + printf("Recognized BeagleBoardToys VGA board\n"); + break;; + case BBTOYS_LCD: + printf("Recognized BeagleBoardToys LCD board\n"); + break;; case BEAGLE_NO_EEPROM: printf("No EEPROM on expansion board\n"); setenv("buddy", "none"); @@ -273,3 +335,98 @@ int board_mmc_init(bd_t *bis) return 0; } #endif + +#ifdef CONFIG_USB_EHCI + +#define GPIO_PHY_RESET 147 + +/* Reset is needed otherwise the kernel-driver will throw an error. */ +int ehci_hcd_stop(void) +{ + pr_debug("Resetting OMAP3 EHCI\n"); + omap_set_gpio_dataout(GPIO_PHY_RESET, 0); + writel(OMAP_UHH_SYSCONFIG_SOFTRESET, OMAP3_UHH_BASE + OMAP_UHH_SYSCONFIG); + return 0; +} + +/* Call usb_stop() before starting the kernel */ +void show_boot_progress(int val) +{ + if(val == 15) + usb_stop(); +} + +/* + * Initialize the OMAP3 EHCI controller and PHY on the BeagleBoard. + * Based on "drivers/usb/host/ehci-omap.c" from Linux 2.6.37. + * See there for additional Copyrights. + */ +int ehci_hcd_init(void) +{ + pr_debug("Initializing OMAP3 ECHI\n"); + + /* Put the PHY in RESET */ + omap_request_gpio(GPIO_PHY_RESET); + omap_set_gpio_direction(GPIO_PHY_RESET, 0); + omap_set_gpio_dataout(GPIO_PHY_RESET, 0); + + /* Hold the PHY in RESET for enough time till DIR is high */ + /* Refer: ISSUE1 */ + udelay(10); + + struct prcm *prcm_base = (struct prcm *)PRCM_BASE; + /* Enable USBHOST_L3_ICLK (USBHOST_MICLK) */ + sr32(&prcm_base->iclken_usbhost, 0, 1, 1); + /* + * Enable USBHOST_48M_FCLK (USBHOST_FCLK1) + * and USBHOST_120M_FCLK (USBHOST_FCLK2) + */ + sr32(&prcm_base->fclken_usbhost, 0, 2, 3); + /* Enable USBTTL_ICLK */ + sr32(&prcm_base->iclken3_core, 2, 1, 1); + /* Enable USBTTL_FCLK */ + sr32(&prcm_base->fclken3_core, 2, 1, 1); + pr_debug("USB clocks enabled\n"); + + /* perform TLL soft reset, and wait until reset is complete */ + writel(OMAP_USBTLL_SYSCONFIG_SOFTRESET, + OMAP3_USBTLL_BASE + OMAP_USBTLL_SYSCONFIG); + /* Wait for TLL reset to complete */ + while (!(readl(OMAP3_USBTLL_BASE + OMAP_USBTLL_SYSSTATUS) + & OMAP_USBTLL_SYSSTATUS_RESETDONE)); + pr_debug("TLL reset done\n"); + + writel(OMAP_USBTLL_SYSCONFIG_ENAWAKEUP | + OMAP_USBTLL_SYSCONFIG_SIDLEMODE | + OMAP_USBTLL_SYSCONFIG_CACTIVITY, + OMAP3_USBTLL_BASE + OMAP_USBTLL_SYSCONFIG); + + /* Put UHH in NoIdle/NoStandby mode */ + writel(OMAP_UHH_SYSCONFIG_ENAWAKEUP + | OMAP_UHH_SYSCONFIG_SIDLEMODE + | OMAP_UHH_SYSCONFIG_CACTIVITY + | OMAP_UHH_SYSCONFIG_MIDLEMODE, + OMAP3_UHH_BASE + OMAP_UHH_SYSCONFIG); + + /* setup burst configurations */ + writel(OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN + | OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN + | OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN, + OMAP3_UHH_BASE + OMAP_UHH_HOSTCONFIG); + + /* + * Refer ISSUE1: + * Hold the PHY in RESET for enough time till + * PHY is settled and ready + */ + udelay(10); + omap_set_gpio_dataout(GPIO_PHY_RESET, 1); + + hccr = (struct ehci_hccr *)(OMAP3_EHCI_BASE); + hcor = (struct ehci_hcor *)(OMAP3_EHCI_BASE + 0x10); + + pr_debug("OMAP3 EHCI init done\n"); + return 0; +} + +#endif /* CONFIG_USB_EHCI */ diff --git a/board/ti/beagle/beagle.h b/board/ti/beagle/beagle.h index b22b653..a7401b1 100644 --- a/board/ti/beagle/beagle.h +++ b/board/ti/beagle/beagle.h @@ -37,7 +37,8 @@ const omap3_sysinfo sysinfo = { #define REVISION_AXBX 0x7 #define REVISION_CX 0x6 #define REVISION_C4 0x5 -#define REVISION_XM 0x0 +#define REVISION_XM_A 0x0 +#define REVISION_XM_B 0x1 /* * IEN - Input Enable @@ -273,18 +274,18 @@ const omap3_sysinfo sysinfo = { MUX_VAL(CP(MCSPI1_CS1), (IDIS | PTD | EN | M0)) /*McSPI1_CS1*/\ MUX_VAL(CP(MCSPI1_CS2), (IDIS | PTD | DIS | M4)) /*GPIO_176*/\ /* USB EHCI (port 2) */\ - MUX_VAL(CP(MCSPI1_CS3), (IEN | PTU | DIS | M3)) /*HSUSB2_DATA2*/\ - MUX_VAL(CP(MCSPI2_CLK), (IEN | PTU | DIS | M3)) /*HSUSB2_DATA7*/\ - MUX_VAL(CP(MCSPI2_SIMO), (IEN | PTU | DIS | M3)) /*HSUSB2_DATA4*/\ - MUX_VAL(CP(MCSPI2_SOMI), (IEN | PTU | DIS | M3)) /*HSUSB2_DATA5*/\ - MUX_VAL(CP(MCSPI2_CS0), (IEN | PTU | DIS | M3)) /*HSUSB2_DATA6*/\ - MUX_VAL(CP(MCSPI2_CS1), (IEN | PTU | DIS | M3)) /*HSUSB2_DATA3*/\ - MUX_VAL(CP(ETK_D10_ES2), (IDIS | PTU | DIS | M3)) /*HSUSB2_CLK*/\ - MUX_VAL(CP(ETK_D11_ES2), (IDIS | PTU | DIS | M3)) /*HSUSB2_STP*/\ - MUX_VAL(CP(ETK_D12_ES2), (IEN | PTU | DIS | M3)) /*HSUSB2_DIR*/\ - MUX_VAL(CP(ETK_D13_ES2), (IEN | PTU | DIS | M3)) /*HSUSB2_NXT*/\ - MUX_VAL(CP(ETK_D14_ES2), (IEN | PTU | DIS | M3)) /*HSUSB2_DATA0*/\ - MUX_VAL(CP(ETK_D15_ES2), (IEN | PTU | DIS | M3)) /*HSUSB2_DATA1*/\ + MUX_VAL(CP(MCSPI1_CS3), (IEN | PTD | EN | M3)) /*HSUSB2_DATA2*/\ + MUX_VAL(CP(MCSPI2_CLK), (IEN | PTD | EN | M3)) /*HSUSB2_DATA7*/\ + MUX_VAL(CP(MCSPI2_SIMO), (IEN | PTD | EN | M3)) /*HSUSB2_DATA4*/\ + MUX_VAL(CP(MCSPI2_SOMI), (IEN | PTD | EN | M3)) /*HSUSB2_DATA5*/\ + MUX_VAL(CP(MCSPI2_CS0), (IEN | PTD | EN | M3)) /*HSUSB2_DATA6*/\ + MUX_VAL(CP(MCSPI2_CS1), (IEN | PTD | EN | M3)) /*HSUSB2_DATA3*/\ + MUX_VAL(CP(ETK_D10_ES2), (IDIS | PTD | DIS | M3)) /*HSUSB2_CLK*/\ + MUX_VAL(CP(ETK_D11_ES2), (IDIS | PTD | DIS | M3)) /*HSUSB2_STP*/\ + MUX_VAL(CP(ETK_D12_ES2), (IEN | PTD | EN | M3)) /*HSUSB2_DIR*/\ + MUX_VAL(CP(ETK_D13_ES2), (IEN | PTD | EN | M3)) /*HSUSB2_NXT*/\ + MUX_VAL(CP(ETK_D14_ES2), (IEN | PTD | EN | M3)) /*HSUSB2_DATA0*/\ + MUX_VAL(CP(ETK_D15_ES2), (IEN | PTD | EN | M3)) /*HSUSB2_DATA1*/\ /*Control and debug */\ MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) /*SYS_32K*/\ MUX_VAL(CP(SYS_CLKREQ), (IEN | PTD | DIS | M0)) /*SYS_CLKREQ*/\ @@ -383,7 +384,8 @@ const omap3_sysinfo sysinfo = { MUX_VAL(CP(MCBSP3_CLKX), (IEN | PTD | DIS | M4)) /*GPIO_141*/\ MUX_VAL(CP(UART2_CTS), (IEN | PTU | EN | M0)) /*UART2_CTS*/\ MUX_VAL(CP(UART2_RTS), (IDIS | PTD | DIS | M0)) /*UART2_RTS*/\ - MUX_VAL(CP(UART2_TX), (IDIS | PTD | DIS | M0)) /*UART2_TX*/ + MUX_VAL(CP(UART2_TX), (IDIS | PTD | DIS | M0)) /*UART2_TX*/\ + MUX_VAL(CP(UART2_RX), (IDIS | PTU | EN | M4)) /*GPIO_147*/ #define MUX_BEAGLE_XM() \ MUX_VAL(CP(GPMC_NCS5), (IDIS | PTD | EN | M4)) /*GPIO_56*/\ @@ -457,4 +459,16 @@ const omap3_sysinfo sysinfo = { MUX_VAL(CP(MCBSP1_DR), (IEN | PTU | EN | M1)) /*MCSPI4_SOMI*/\ MUX_VAL(CP(MCBSP1_FSX), (IDIS | PTU | DIS | M1)) /*MCSPI4_CS0*/ +#define MUX_BBTOYS_WIFI() \ + MUX_VAL(CP(MMC2_CLK), (IEN | PTU | EN | M0)) /*MMC2_CLK*/\ + MUX_VAL(CP(MMC2_CMD), (IEN | PTU | EN | M0)) /*MMC2_CMD*/\ + MUX_VAL(CP(MMC2_DAT0), (IEN | PTU | EN | M0)) /*MMC2_DAT0*/\ + MUX_VAL(CP(MMC2_DAT1), (IEN | PTU | EN | M0)) /*MMC2_DAT1*/\ + MUX_VAL(CP(MMC2_DAT2), (IEN | PTU | EN | M0)) /*MMC2_DAT2*/\ + MUX_VAL(CP(MMC2_DAT3), (IEN | PTU | EN | M0)) /*MMC2_DAT3*/\ + MUX_VAL(CP(MMC2_DAT4), (IDIS | PTU | EN | M4)) /*GPIO_136 FM_EN/BT_WU*/\ + MUX_VAL(CP(MMC2_DAT5), (IEN | PTU | EN | M4)) /*GPIO_137 WLAN_IRQ*/\ + MUX_VAL(CP(MMC2_DAT6), (IDIS | PTU | EN | M4)) /*GPIO_138 BT_EN*/\ + MUX_VAL(CP(MMC2_DAT7), (IDIS | PTU | EN | M4)) /*GPIO_139 WLAN_EN*/ + #endif diff --git a/board/ti/beagle/led.c b/board/ti/beagle/led.c new file mode 100644 index 0000000..df26552 --- /dev/null +++ b/board/ti/beagle/led.c @@ -0,0 +1,91 @@ +/* + * Copyright (c) 2010 Texas Instruments, Inc. + * Jason Kridner <jkridner@beagleboard.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <status_led.h> +#include <asm/arch/cpu.h> +#include <asm/io.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/gpio.h> + +static unsigned int saved_state[2] = {STATUS_LED_OFF, STATUS_LED_OFF}; + +/* GPIO pins for the LEDs */ +#define BEAGLE_LED_USR0 149 +#define BEAGLE_LED_USR1 150 + +#ifdef STATUS_LED_GREEN +void green_LED_off (void) +{ + __led_set (STATUS_LED_GREEN, 0); +} + +void green_LED_on (void) +{ + __led_set (STATUS_LED_GREEN, 1); +} +#endif + +void __led_init (led_id_t mask, int state) +{ + __led_set (mask, state); +} + +void __led_toggle (led_id_t mask) +{ +#ifdef STATUS_LED_BIT + if (STATUS_LED_BIT & mask) { + if (STATUS_LED_ON == saved_state[0]) + __led_set(STATUS_LED_BIT, 0); + else + __led_set(STATUS_LED_BIT, 1); + } +#endif +#ifdef STATUS_LED_BIT1 + if (STATUS_LED_BIT1 & mask) { + if (STATUS_LED_ON == saved_state[1]) + __led_set(STATUS_LED_BIT1, 0); + else + __led_set(STATUS_LED_BIT1, 1); + } +#endif +} + +void __led_set (led_id_t mask, int state) +{ +#ifdef STATUS_LED_BIT + if (STATUS_LED_BIT & mask) { + if (!omap_request_gpio(BEAGLE_LED_USR0)) { + omap_set_gpio_direction(BEAGLE_LED_USR0, 0); + omap_set_gpio_dataout(BEAGLE_LED_USR0, state); + } + saved_state[0] = state; + } +#endif +#ifdef STATUS_LED_BIT1 + if (STATUS_LED_BIT1 & mask) { + if (!omap_request_gpio(BEAGLE_LED_USR1)) { + omap_set_gpio_direction(BEAGLE_LED_USR1, 0); + omap_set_gpio_dataout(BEAGLE_LED_USR1, state); + } + saved_state[1] = state; + } +#endif +} + diff --git a/board/tqc/tqm8xx/u-boot.lds b/board/tqc/tqm8xx/u-boot.lds index 83a09b0..f625c3d 100644 --- a/board/tqc/tqm8xx/u-boot.lds +++ b/board/tqc/tqm8xx/u-boot.lds @@ -63,13 +63,14 @@ SECTIONS PROVIDE (erotext = .); .reloc : { - KEEP(*(.got)) _GOT2_TABLE_ = .; KEEP(*(.got2)) + KEEP(*(.got)) + PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); _FIXUP_TABLE_ = .; KEEP(*(.fixup)) } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; __fixup_entries = (. - _FIXUP_TABLE_)>>2; .data : diff --git a/board/trab/config.mk b/board/trab/config.mk index a349b8c..367f0b7 100644 --- a/board/trab/config.mk +++ b/board/trab/config.mk @@ -24,5 +24,3 @@ sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp ifndef CONFIG_SYS_TEXT_BASE CONFIG_SYS_TEXT_BASE = 0x0DF40000 endif - -LDSCRIPT := $(SRCTREE)/board/$(BOARDDIR)/u-boot.lds diff --git a/board/v37/u-boot.lds b/board/v37/u-boot.lds index 578a49b..e62d53d 100644 --- a/board/v37/u-boot.lds +++ b/board/v37/u-boot.lds @@ -47,13 +47,14 @@ SECTIONS PROVIDE (erotext = .); .reloc : { - KEEP(*(.got)) _GOT2_TABLE_ = .; KEEP(*(.got2)) + KEEP(*(.got)) + PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); _FIXUP_TABLE_ = .; KEEP(*(.fixup)) } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; __fixup_entries = (. - _FIXUP_TABLE_)>>2; .data : diff --git a/board/westel/amx860/u-boot.lds b/board/westel/amx860/u-boot.lds index 3514a66..3470b43 100644 --- a/board/westel/amx860/u-boot.lds +++ b/board/westel/amx860/u-boot.lds @@ -56,13 +56,14 @@ SECTIONS PROVIDE (erotext = .); .reloc : { - KEEP(*(.got)) _GOT2_TABLE_ = .; KEEP(*(.got2)) + KEEP(*(.got)) + PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); _FIXUP_TABLE_ = .; KEEP(*(.fixup)) } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; __fixup_entries = (. - _FIXUP_TABLE_)>>2; .data : diff --git a/board/xes/xpedite517x/ddr.c b/board/xes/xpedite517x/ddr.c index 1d57d09..3a6e297 100644 --- a/board/xes/xpedite517x/ddr.c +++ b/board/xes/xpedite517x/ddr.c @@ -26,40 +26,12 @@ #include <asm/fsl_ddr_sdram.h> #include <asm/fsl_ddr_dimm_params.h> -static void get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address) +void get_spd(ddr2_spd_eeprom_t *spd, u8 i2c_address) { i2c_read(i2c_address, SPD_EEPROM_OFFSET, 2, (uchar *)spd, sizeof(ddr2_spd_eeprom_t)); } -unsigned int fsl_ddr_get_mem_data_rate(void) -{ - return get_bus_freq(0); -} - -void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd, - unsigned int ctrl_num) -{ - unsigned int i; - unsigned int i2c_address = 0; - - for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) { - if (ctrl_num == 0) { - i2c_address = SPD_EEPROM_ADDRESS1; -#ifdef SPD_EEPROM_ADDRESS2 - } else if (ctrl_num == 1) { - i2c_address = SPD_EEPROM_ADDRESS2; -#endif - } else { - /* An inalid ctrl number was give, use default SPD */ - printf("ERROR: invalid DDR ctrl: %d\n", ctrl_num); - i2c_address = SPD_EEPROM_ADDRESS1; - } - - get_spd(&(ctrl_dimms_spd[i]), i2c_address); - } -} - /* * There are four board-specific SDRAM timing parameters which must be * calculated based on the particular PCB artwork. These are: @@ -144,7 +116,7 @@ void fsl_ddr_board_options(memctl_options_t *popts, unsigned int datarate; get_sys_info(&sysinfo); - datarate = fsl_ddr_get_mem_data_rate() / 1000000; + datarate = get_ddr_freq(0) / 1000000; for (i = 0; i < ARRAY_SIZE(bopts_ctrl[ctrl_num]); i++) { if ((bopts[i].datarate_mhz_low <= datarate) && diff --git a/board/xes/xpedite517x/xpedite517x.c b/board/xes/xpedite517x/xpedite517x.c index 61443aa..179b238 100644 --- a/board/xes/xpedite517x/xpedite517x.c +++ b/board/xes/xpedite517x/xpedite517x.c @@ -93,12 +93,3 @@ void ft_board_setup(void *blob, bd_t *bd) ft_cpu_setup(blob, bd); } #endif - -#ifdef CONFIG_MP -extern void cpu_mp_lmb_reserve(struct lmb *lmb); - -void board_lmb_reserve(struct lmb *lmb) -{ - cpu_mp_lmb_reserve(lmb); -} -#endif diff --git a/board/xes/xpedite520x/ddr.c b/board/xes/xpedite520x/ddr.c index c5616d5..3671cb8 100644 --- a/board/xes/xpedite520x/ddr.c +++ b/board/xes/xpedite520x/ddr.c @@ -12,8 +12,7 @@ #include <asm/fsl_ddr_sdram.h> #include <asm/fsl_ddr_dimm_params.h> -static void -get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address) +void get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address) { i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr2_spd_eeprom_t)); @@ -27,25 +26,6 @@ get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address) } } -unsigned int fsl_ddr_get_mem_data_rate(void) -{ - return get_ddr_freq(0); -} - -void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd, - unsigned int ctrl_num) -{ - unsigned int i; - - if (ctrl_num) { - printf("%s: invalid ctrl_num = %d\n", __func__, ctrl_num); - return; - } - - for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) - get_spd(&(ctrl_dimms_spd[i]), SPD_EEPROM_ADDRESS); -} - void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, unsigned int ctrl_num) diff --git a/board/xes/xpedite537x/ddr.c b/board/xes/xpedite537x/ddr.c index 4d3f255..d0662b0 100644 --- a/board/xes/xpedite537x/ddr.c +++ b/board/xes/xpedite537x/ddr.c @@ -27,32 +27,12 @@ #include <asm/fsl_ddr_sdram.h> #include <asm/fsl_ddr_dimm_params.h> -static void get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address) +void get_spd(ddr2_spd_eeprom_t *spd, u8 i2c_address) { i2c_read(i2c_address, SPD_EEPROM_OFFSET, 2, (uchar *)spd, sizeof(ddr2_spd_eeprom_t)); } -unsigned int fsl_ddr_get_mem_data_rate(void) -{ - return get_ddr_freq(0); -} - -void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd, - unsigned int ctrl_num) -{ - unsigned int i; - unsigned int i2c_address = 0; - - for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) { - if (ctrl_num == 0) - i2c_address = SPD_EEPROM_ADDRESS1; - if (ctrl_num == 1) - i2c_address = SPD_EEPROM_ADDRESS2; - get_spd(&(ctrl_dimms_spd[i]), i2c_address); - } -} - /* * There are four board-specific SDRAM timing parameters which must be * calculated based on the particular PCB artwork. These are: diff --git a/board/xes/xpedite537x/xpedite537x.c b/board/xes/xpedite537x/xpedite537x.c index d074495..9d9afae 100644 --- a/board/xes/xpedite537x/xpedite537x.c +++ b/board/xes/xpedite537x/xpedite537x.c @@ -96,12 +96,3 @@ void ft_board_setup(void *blob, bd_t *bd) ft_cpu_setup(blob, bd); } #endif - -#ifdef CONFIG_MP -extern void cpu_mp_lmb_reserve(struct lmb *lmb); - -void board_lmb_reserve(struct lmb *lmb) -{ - cpu_mp_lmb_reserve(lmb); -} -#endif diff --git a/board/xes/xpedite550x/ddr.c b/board/xes/xpedite550x/ddr.c index 38a4597..3b6e08b 100644 --- a/board/xes/xpedite550x/ddr.c +++ b/board/xes/xpedite550x/ddr.c @@ -27,30 +27,12 @@ #include <asm/fsl_ddr_sdram.h> #include <asm/fsl_ddr_dimm_params.h> -static void get_spd(ddr3_spd_eeprom_t *spd, unsigned char i2c_address) +void get_spd(ddr3_spd_eeprom_t *spd, u8 i2c_address) { i2c_read(i2c_address, SPD_EEPROM_OFFSET, 2, (uchar *)spd, sizeof(ddr3_spd_eeprom_t)); } -void fsl_ddr_get_spd(ddr3_spd_eeprom_t *ctrl_dimms_spd, - unsigned int ctrl_num) -{ - unsigned int i; - unsigned int i2c_address = 0; - - for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) { - if (ctrl_num == 0 && i == 0) - i2c_address = SPD_EEPROM_ADDRESS1; - get_spd(&(ctrl_dimms_spd[i]), i2c_address); - } -} - -unsigned int fsl_ddr_get_mem_data_rate(void) -{ - return get_ddr_freq(0); -} - /* * There are traditionally three board-specific SDRAM timing parameters * which must be calculated based on the particular PCB artwork. These are: diff --git a/board/xes/xpedite550x/xpedite550x.c b/board/xes/xpedite550x/xpedite550x.c index 6f91c83..24b2b0e 100644 --- a/board/xes/xpedite550x/xpedite550x.c +++ b/board/xes/xpedite550x/xpedite550x.c @@ -96,12 +96,3 @@ void ft_board_setup(void *blob, bd_t *bd) ft_cpu_setup(blob, bd); } #endif - -#ifdef CONFIG_MP -extern void cpu_mp_lmb_reserve(struct lmb *lmb); - -void board_lmb_reserve(struct lmb *lmb) -{ - cpu_mp_lmb_reserve(lmb); -} -#endif diff --git a/board/xilinx/ml507/config.mk b/board/xilinx/ml507/config.mk deleted file mode 100644 index 4df1d9c..0000000 --- a/board/xilinx/ml507/config.mk +++ /dev/null @@ -1,4 +0,0 @@ -# need to strip off double quotes -ifneq ($(CONFIG_SYS_LDSCRIPT),) -LDSCRIPT := $(subst ",,$(CONFIG_SYS_LDSCRIPT)) -endif diff --git a/board/xilinx/ppc405-generic/config.mk b/board/xilinx/ppc405-generic/config.mk deleted file mode 100644 index 4df1d9c..0000000 --- a/board/xilinx/ppc405-generic/config.mk +++ /dev/null @@ -1,4 +0,0 @@ -# need to strip off double quotes -ifneq ($(CONFIG_SYS_LDSCRIPT),) -LDSCRIPT := $(subst ",,$(CONFIG_SYS_LDSCRIPT)) -endif diff --git a/board/xilinx/ppc440-generic/config.mk b/board/xilinx/ppc440-generic/config.mk deleted file mode 100644 index 4df1d9c..0000000 --- a/board/xilinx/ppc440-generic/config.mk +++ /dev/null @@ -1,4 +0,0 @@ -# need to strip off double quotes -ifneq ($(CONFIG_SYS_LDSCRIPT),) -LDSCRIPT := $(subst ",,$(CONFIG_SYS_LDSCRIPT)) -endif @@ -52,6 +52,8 @@ a320evb arm arm920t - faraday at91rm9200ek arm arm920t at91rm9200ek atmel at91 at91rm9200ek at91rm9200ek_ram arm arm920t at91rm9200ek atmel at91 at91rm9200ek:RAMBOOT eb_cpux9k2 arm arm920t - BuS at91 +cpuat91 arm arm920t cpuat91 eukrea at91 cpuat91 +cpuat91_ram arm arm920t cpuat91 eukrea at91 cpuat91:RAMBOOT cmc_pu2 arm arm920t - - at91rm9200 csb637 arm arm920t - - at91rm9200 kb9202 arm arm920t - - at91rm9200 @@ -73,6 +75,14 @@ omap1510inn arm arm925t - ti aspenite arm arm926ejs - Marvell armada100 afeb9260 arm arm926ejs - - at91 at91cap9adk arm arm926ejs - atmel at91 +cpu9260 arm arm926ejs cpu9260 eukrea at91 cpu9260:CPU9260 +cpu9260_nand arm arm926ejs cpu9260 eukrea at91 cpu9260:CPU9260,NANDBOOT +cpu9260_128M arm arm926ejs cpu9260 eukrea at91 cpu9260:CPU9260,CPU9260_128M +cpu9260_nand_128M arm arm926ejs cpu9260 eukrea at91 cpu9260:CPU9260,CPU9260_128M,NANDBOOT +cpu9G20 arm arm926ejs cpu9260 eukrea at91 cpu9260:CPU9G20 +cpu9G20_nand arm arm926ejs cpu9260 eukrea at91 cpu9260:CPU9G20,NANDBOOT +cpu9G20_128M arm arm926ejs cpu9260 eukrea at91 cpu9260:CPU9G20,CPU9G20_128M +cpu9G20_nand_128M arm arm926ejs cpu9260 eukrea at91 cpu9260:CPU9G20,CPU9G20_128M,NANDBOOT top9000eval_xe arm arm926ejs top9000 emk at91 top9000:EVAL9000 top9000su_xe arm arm926ejs top9000 emk at91 top9000:SU9000 meesc arm arm926ejs - esd at91 @@ -94,6 +104,8 @@ davinci_schmoogie arm arm926ejs schmoogie davinci davinci_sffsdr arm arm926ejs sffsdr davinci davinci davinci_sonata arm arm926ejs sonata davinci davinci suen3 arm arm926ejs km_arm keymile kirkwood +suen8 arm arm926ejs km_arm keymile kirkwood +mgcoge2un arm arm926ejs km_arm keymile kirkwood guruplug arm arm926ejs - Marvell kirkwood mv88f6281gtw_ge arm arm926ejs - Marvell kirkwood openrd_base arm arm926ejs - Marvell kirkwood @@ -103,20 +115,24 @@ dockstar arm arm926ejs - Seagate jadecpu arm arm926ejs jadecpu syteco mb86r0x imx27lite arm arm926ejs imx27lite logicpd mx27 magnesium arm arm926ejs imx27lite logicpd mx27 +nhk8815 arm arm926ejs nhk8815 st nomadik +nhk8815_onenand arm arm926ejs nhk8815 st nomadik nhk8815:BOOT_ONENAND omap5912osk arm arm926ejs - ti omap edminiv2 arm arm926ejs - LaCie orion5x dkb arm arm926ejs - Marvell pantheon ca9x4_ct_vxp arm armv7 vexpress armltd efikamx arm armv7 efikamx - mx5 -mx51evk arm armv7 mx51evk freescale mx5 -mx53evk arm armv7 mx53evk freescale mx5 +mx51evk arm armv7 mx51evk freescale mx5 mx51evk:IMX_CONFIG=board/freescale/mx51evk/imximage.cfg +mx53evk arm armv7 mx53evk freescale mx5 mx53evk:IMX_CONFIG=board/freescale/mx53evk/imximage.cfg vision2 arm armv7 vision2 ttcontrol mx5 cm_t35 arm armv7 cm_t35 - omap3 omap3_overo arm armv7 overo - omap3 omap3_pandora arm armv7 pandora - omap3 igep0020 arm armv7 igep0020 isee omap3 igep0030 arm armv7 igep0030 isee omap3 +am3517_crane arm armv7 am3517crane ti omap3 am3517_evm arm armv7 am3517evm logicpd omap3 +dig297 arm armv7 dig297 comelit omap3 omap3_zoom1 arm armv7 zoom1 logicpd omap3 omap3_zoom2 arm armv7 zoom2 logicpd omap3 omap3_beagle arm armv7 beagle ti omap3 @@ -174,7 +190,9 @@ favr-32-ezkit avr32 at32ap - earthlc mimc200 avr32 at32ap - mimc at32ap700x hammerhead avr32 at32ap - miromico at32ap700x bct-brettl2 blackfin blackfin +bf506f-ezkit blackfin blackfin bf518f-ezbrd blackfin blackfin +bf525-ucr2 blackfin blackfin bf526-ezbrd blackfin blackfin bf527-ad7160-eval blackfin blackfin bf527-ezkit blackfin blackfin @@ -198,12 +216,13 @@ cm-bf537e blackfin blackfin cm-bf537u blackfin blackfin cm-bf548 blackfin blackfin cm-bf561 blackfin blackfin +dnp5370 blackfin blackfin ibf-dsp561 blackfin blackfin ip04 blackfin blackfin tcm-bf518 blackfin blackfin tcm-bf537 blackfin blackfin -eNET i386 i386 eNET - sc520 eNET:SYS_TEXT_BASE=0x38040000 -eNET_SRAM i386 i386 eNET - sc520 eNET:SYS_TEXT_BASE=0x19000000 +eNET x86 x86 eNET - sc520 eNET:SYS_TEXT_BASE=0x38040000 +eNET_SRAM x86 x86 eNET - sc520 eNET:SYS_TEXT_BASE=0x19000000 idmr m68k mcf52x2 TASREG m68k mcf52x2 tasreg esd M5208EVBE m68k mcf52x2 m5208evbe freescale @@ -217,32 +236,31 @@ M5282EVB m68k mcf52x2 m5282evb freesca M53017EVB m68k mcf52x2 m53017evb freescale EP2500 m68k mcf52x2 ep2500 Mercury microblaze-generic microblaze microblaze microblaze-generic xilinx -dbau1000 mips mips dbau1x00 - - dbau1x00:DBAU1000 -dbau1100 mips mips dbau1x00 - - dbau1x00:DBAU1100 -dbau1500 mips mips dbau1x00 - - dbau1x00:DBAU1500 -dbau1550 mips mips dbau1x00 - - dbau1x00:DBAU1550 -dbau1550_el mips mips dbau1x00 - - dbau1x00:DBAU1550 -gth2 mips mips -incaip mips mips -incaip_100MHz mips mips incaip - - incaip:CPU_CLOCK_RATE=100000000 -incaip_133MHz mips mips incaip - - incaip:CPU_CLOCK_RATE=133000000 -incaip_150MHz mips mips incaip - - incaip:CPU_CLOCK_RATE=150000000 -pb1000 mips mips pb1x00 - - pb1x00:PB1000 -purple mips mips -qemu_mips mips mips qemu-mips - - qemu-mips -tb0229 mips mips -vct_premium mips mips vct micronas - vct:VCT_PREMIUM -vct_premium_small mips mips vct micronas - vct:VCT_PREMIUM,VCT_SMALL_IMAGE -vct_premium_onenand mips mips vct micronas - vct:VCT_PREMIUM,VCT_ONENAND -vct_premium_onenand_small mips mips vct micronas - vct:VCT_PREMIUM,VCT_ONENAND,VCT_SMALL_IMAGE -vct_platinum mips mips vct micronas - vct:VCT_PLATINUM -vct_platinum_small mips mips vct micronas - vct:VCT_PLATINUM,VCT_SMALL_IMAGE -vct_platinum_onenand mips mips vct micronas - vct:VCT_PLATINUM,VCT_ONENAND -vct_platinum_onenand_small mips mips vct micronas - vct:VCT_PLATINUM,VCT_ONENAND,VCT_SMALL_IMAGE -vct_platinumavc mips mips vct micronas - vct:VCT_PLATINUMAVC -vct_platinumavc_small mips mips vct micronas - vct:VCT_PLATINUMAVC,VCT_SMALL_IMAGE -vct_platinumavc_onenand mips mips vct micronas - vct:VCT_PLATINUMAVC,VCT_ONENAND -vct_platinumavc_onenand_small mips mips vct micronas - vct:VCT_PLATINUMAVC,VCT_ONENAND,VCT_SMALL_IMAGE +dbau1000 mips mips32 dbau1x00 - au1x00 dbau1x00:DBAU1000 +dbau1100 mips mips32 dbau1x00 - au1x00 dbau1x00:DBAU1100 +dbau1500 mips mips32 dbau1x00 - au1x00 dbau1x00:DBAU1500 +dbau1550 mips mips32 dbau1x00 - au1x00 dbau1x00:DBAU1550 +dbau1550_el mips mips32 dbau1x00 - au1x00 dbau1x00:DBAU1550 +gth2 mips mips32 - - au1x00 +incaip mips mips32 incaip - incaip +incaip_100MHz mips mips32 incaip - incaip incaip:CPU_CLOCK_RATE=100000000 +incaip_133MHz mips mips32 incaip - incaip incaip:CPU_CLOCK_RATE=133000000 +incaip_150MHz mips mips32 incaip - incaip incaip:CPU_CLOCK_RATE=150000000 +pb1000 mips mips32 pb1x00 - au1x00 pb1x00:PB1000 +qemu_mips mips mips32 qemu-mips - - qemu-mips +tb0229 mips mips32 +vct_premium mips mips32 vct micronas - vct:VCT_PREMIUM +vct_premium_small mips mips32 vct micronas - vct:VCT_PREMIUM,VCT_SMALL_IMAGE +vct_premium_onenand mips mips32 vct micronas - vct:VCT_PREMIUM,VCT_ONENAND +vct_premium_onenand_small mips mips32 vct micronas - vct:VCT_PREMIUM,VCT_ONENAND,VCT_SMALL_IMAGE +vct_platinum mips mips32 vct micronas - vct:VCT_PLATINUM +vct_platinum_small mips mips32 vct micronas - vct:VCT_PLATINUM,VCT_SMALL_IMAGE +vct_platinum_onenand mips mips32 vct micronas - vct:VCT_PLATINUM,VCT_ONENAND +vct_platinum_onenand_small mips mips32 vct micronas - vct:VCT_PLATINUM,VCT_ONENAND,VCT_SMALL_IMAGE +vct_platinumavc mips mips32 vct micronas - vct:VCT_PLATINUMAVC +vct_platinumavc_small mips mips32 vct micronas - vct:VCT_PLATINUMAVC,VCT_SMALL_IMAGE +vct_platinumavc_onenand mips mips32 vct micronas - vct:VCT_PLATINUMAVC,VCT_ONENAND +vct_platinumavc_onenand_small mips mips32 vct micronas - vct:VCT_PLATINUMAVC,VCT_ONENAND,VCT_SMALL_IMAGE PCI5441 nios2 nios2 pci5441 psyent PK1C20 nios2 nios2 pk1c20 psyent EVB64260 powerpc 74xx_7xx evb64260 - - EVB64260 @@ -422,6 +440,7 @@ PQ2FADS-ZU_66MHz_lowboot powerpc mpc8260 mpc8260ads freesca PQ2FADS-ZU_lowboot powerpc mpc8260 mpc8260ads freescale - MPC8260ADS:ADSTYPE=CONFIG_SYS_PQ2FADS,SYS_TEXT_BASE=0xFF800000 VoVPN-GW_66MHz powerpc mpc8260 vovpn-gw funkwerk - VoVPN-GW:CLKIN_66MHz mgcoge powerpc mpc8260 - keymile +mgcoge2ne powerpc mpc8260 mgcoge keymile SCM powerpc mpc8260 - siemens TQM8255_AA powerpc mpc8260 tqm8260 tqc - TQM8260:MPC8255,300MHz TQM8260_AA powerpc mpc8260 tqm8260 tqc - TQM8260:MPC8260,200MHz @@ -470,11 +489,15 @@ MPC8360ERDK_66 powerpc mpc83xx mpc8360erdk freesca MPC837XEMDS powerpc mpc83xx mpc837xemds freescale - MPC837XEMDS MPC837XEMDS_HOST powerpc mpc83xx mpc837xemds freescale - MPC837XEMDS:PCI MPC837XERDB powerpc mpc83xx mpc837xerdb freescale -kmeter1 powerpc mpc83xx kmeter1 keymile +kmeter1 powerpc mpc83xx km83xx keymile MVBLM7 powerpc mpc83xx mvblm7 matrix_vision SIMPC8313_LP powerpc mpc83xx simpc8313 sheldon - SIMPC8313:NAND_LP SIMPC8313_SP powerpc mpc83xx simpc8313 sheldon - SIMPC8313:NAND_SP +kmsupx5 powerpc mpc83xx km83xx keymile +suvd3 powerpc mpc83xx km83xx keymile TQM834x powerpc mpc83xx tqm834x tqc +tuda1 powerpc mpc83xx km83xx keymile +tuxa1 powerpc mpc83xx km83xx keymile sbc8540 powerpc mpc85xx sbc8560 - - SBC8540 sbc8540_33 powerpc mpc85xx sbc8560 - - SBC8540 sbc8540_66 powerpc mpc85xx sbc8560 - - SBC8540 @@ -509,26 +532,44 @@ MPC8572DS powerpc mpc85xx mpc8572ds freesca MPC8572DS_36BIT powerpc mpc85xx mpc8572ds freescale - MPC8572DS:36BIT MPC8572DS_NAND powerpc mpc85xx mpc8572ds freescale - MPC8572DS:NAND P1011RDB powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1011RDB +P1011RDB_36BIT powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1011RDB,36BIT +P1011RDB_36BIT_SDCARD powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1011RDB,36BIT,SDCARD +P1011RDB_36BIT_SPIFLASH powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1011RDB,36BIT,SPIFLASH P1011RDB_NAND powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1011RDB,NAND P1011RDB_SDCARD powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1011RDB,SDCARD P1011RDB_SPIFLASH powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1011RDB,SPIFLASH P1020RDB powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1020RDB +P1020RDB_36BIT powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1020RDB,36BIT +P1020RDB_36BIT_SDCARD powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1020RDB,36BIT,SDCARD +P1020RDB_36BIT_SPIFLASH powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1020RDB,36BIT,SPIFLASH P1020RDB_NAND powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1020RDB,NAND P1020RDB_SDCARD powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1020RDB,SDCARD P1020RDB_SPIFLASH powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1020RDB,SPIFLASH P1022DS powerpc mpc85xx p1022ds freescale +P1022DS_36BIT powerpc mpc85xx p1022ds freescale - P1022DS:36BIT P2010RDB powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2010RDB +P2010RDB_36BIT powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2010RDB,36BIT +P2010RDB_36BIT_SDCARD powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2010RDB,36BIT,SDCARD +P2010RDB_36BIT_SPIFLASH powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2010RDB,36BIT,SPIFLASH P2010RDB_NAND powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2010RDB,NAND P2010RDB_SDCARD powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2010RDB,SDCARD P2010RDB_SPIFLASH powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2010RDB,SPIFLASH P2020DS powerpc mpc85xx p2020ds freescale P2020DS_36BIT powerpc mpc85xx p2020ds freescale - P2020DS:36BIT P2020DS_DDR2 powerpc mpc85xx p2020ds freescale - P2020DS:DDR2 +P2020DS_SDCARD powerpc mpc85xx p2020ds freescale - P2020DS:SDCARD +P2020DS_SPIFLASH powerpc mpc85xx p2020ds freescale - P2020DS:SPIFLASH P2020RDB powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2020RDB +P2020RDB_36BIT powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2020RDB,36BIT +P2020RDB_36BIT_SDCARD powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2020RDB,36BIT,SDCARD +P2020RDB_36BIT_SPIFLASH powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2020RDB,36BIT,SPIFLASH P2020RDB_NAND powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2020RDB,NAND P2020RDB_SDCARD powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2020RDB,SDCARD P2020RDB_SPIFLASH powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2020RDB,SPIFLASH +P3041DS powerpc mpc85xx corenet_ds freescale P4080DS powerpc mpc85xx corenet_ds freescale +P4080DS_RAMBOOT_PBL powerpc mpc85xx corenet_ds freescale - P4080DS:RAMBOOT_PBL,SYS_TEXT_BASE=0xFFF80000 +P5020DS powerpc mpc85xx corenet_ds freescale mpq101 powerpc mpc85xx mpq101 mercury - mpq101 stxgp3 powerpc mpc85xx stxgp3 stx stxssa powerpc mpc85xx stxssa stx - stxssa @@ -701,9 +742,9 @@ yellowstone powerpc ppc4xx yosemite amcc yosemite powerpc ppc4xx yosemite amcc - yosemite:YOSEMITE yucca powerpc ppc4xx - amcc AP1000 powerpc ppc4xx ap1000 amirix -fx12mm powerpc ppc4xx fx12mm avnet - fx12mm:SYS_TEXT_BASE=0x04000000,RESET_VECTOR_ADDRESS=0x03FFFFFC,INIT_TLB=board/xilinx/ppc405-generic/init.o +fx12mm powerpc ppc4xx fx12mm avnet - fx12mm:SYS_TEXT_BASE=0x04000000,RESET_VECTOR_ADDRESS=0x04100000,INIT_TLB=board/xilinx/ppc405-generic/init.o fx12mm_flash powerpc ppc4xx fx12mm avnet - fx12mm:SYS_TEXT_BASE=0xF7F60000,RESET_VECTOR_ADDRESS=0xF7FFFFFC,INIT_TLB=board/xilinx/ppc405-generic/init.o -v5fx30teval powerpc ppc4xx v5fx30teval avnet - v5fx30teval:SYS_TEXT_BASE=0x04000000,RESET_VECTOR_ADDRESS=0x03FFFFFC,BOOT_FROM_XMD=1,INIT_TLB=board/xilinx/ppc440-generic/init.o +v5fx30teval powerpc ppc4xx v5fx30teval avnet - v5fx30teval:SYS_TEXT_BASE=0x04000000,RESET_VECTOR_ADDRESS=0x04100000,BOOT_FROM_XMD=1,INIT_TLB=board/xilinx/ppc440-generic/init.o v5fx30teval_flash powerpc ppc4xx v5fx30teval avnet - v5fx30teval:SYS_TEXT_BASE=0xF7F60000,RESET_VECTOR_ADDRESS=0xF7FFFFFC,INIT_TLB=board/xilinx/ppc440-generic/init.o CRAYL1 powerpc ppc4xx L1 cray CATcenter powerpc ppc4xx PPChameleonEVB dave - CATcenter:PPCHAMELEON_MODULE_MODEL=1 @@ -763,11 +804,11 @@ p3p440 powerpc ppc4xx - prodriv KAREF powerpc ppc4xx karef sandburst METROBOX powerpc ppc4xx metrobox sandburst xpedite1000 powerpc ppc4xx - xes -ml507 powerpc ppc4xx ml507 xilinx - ml507:SYS_TEXT_BASE=0x04000000,RESET_VECTOR_ADDRESS=0x03FFFFFC,BOOT_FROM_XMD=1,INIT_TLB=board/xilinx/ppc440-generic/init.o +ml507 powerpc ppc4xx ml507 xilinx - ml507:SYS_TEXT_BASE=0x04000000,RESET_VECTOR_ADDRESS=0x04100000,BOOT_FROM_XMD=1,INIT_TLB=board/xilinx/ppc440-generic/init.o ml507_flash powerpc ppc4xx ml507 xilinx - ml507:SYS_TEXT_BASE=0xF7F60000,RESET_VECTOR_ADDRESS=0xF7FFFFFC,INIT_TLB=board/xilinx/ppc440-generic/init.o -xilinx-ppc405-generic powerpc ppc4xx ppc405-generic xilinx - xilinx-ppc405-generic:SYS_TEXT_BASE=0x04000000,RESET_VECTOR_ADDRESS=0x03FFFFFC +xilinx-ppc405-generic powerpc ppc4xx ppc405-generic xilinx - xilinx-ppc405-generic:SYS_TEXT_BASE=0x04000000,RESET_VECTOR_ADDRESS=0x04100000 xilinx-ppc405-generic_flash powerpc ppc4xx ppc405-generic xilinx - xilinx-ppc405-generic:SYS_TEXT_BASE=0xF7F60000,RESET_VECTOR_ADDRESS=0xF7FFFFFC -xilinx-ppc440-generic powerpc ppc4xx ppc440-generic xilinx - xilinx-ppc440-generic:SYS_TEXT_BASE=0x04000000,RESET_VECTOR_ADDRESS=0x03FFFFFC,BOOT_FROM_XMD=1 +xilinx-ppc440-generic powerpc ppc4xx ppc440-generic xilinx - xilinx-ppc440-generic:SYS_TEXT_BASE=0x04000000,RESET_VECTOR_ADDRESS=0x04100000,BOOT_FROM_XMD=1 xilinx-ppc440-generic_flash powerpc ppc4xx ppc440-generic xilinx - xilinx-ppc440-generic:SYS_TEXT_BASE=0xF7F60000,RESET_VECTOR_ADDRESS=0xF7FFFFFC rsk7203 sh sh2 rsk7203 renesas - mpr2 sh sh3 mpr2 - - diff --git a/common/Makefile b/common/Makefile index 048df0c..f81cff9 100644 --- a/common/Makefile +++ b/common/Makefile @@ -98,6 +98,7 @@ COBJS-$(CONFIG_CMD_FLASH) += cmd_flash.o ifdef CONFIG_FPGA COBJS-$(CONFIG_CMD_FPGA) += cmd_fpga.o endif +COBJS-$(CONFIG_CMD_GPIO) += cmd_gpio.o COBJS-$(CONFIG_CMD_I2C) += cmd_i2c.o COBJS-$(CONFIG_CMD_IDE) += cmd_ide.o COBJS-$(CONFIG_CMD_IMMAP) += cmd_immap.o @@ -105,18 +106,25 @@ COBJS-$(CONFIG_CMD_IRQ) += cmd_irq.o COBJS-$(CONFIG_CMD_ITEST) += cmd_itest.o COBJS-$(CONFIG_CMD_JFFS2) += cmd_jffs2.o COBJS-$(CONFIG_CMD_CRAMFS) += cmd_cramfs.o +COBJS-$(CONFIG_CMD_LDRINFO) += cmd_ldrinfo.o COBJS-$(CONFIG_CMD_LICENSE) += cmd_license.o COBJS-y += cmd_load.o COBJS-$(CONFIG_LOGBUFFER) += cmd_log.o COBJS-$(CONFIG_ID_EEPROM) += cmd_mac.o +COBJS-$(CONFIG_CMD_MD5SUM) += cmd_md5sum.o COBJS-$(CONFIG_CMD_MEMORY) += cmd_mem.o COBJS-$(CONFIG_CMD_MFSL) += cmd_mfsl.o COBJS-$(CONFIG_CMD_MG_DISK) += cmd_mgdisk.o COBJS-$(CONFIG_MII) += miiphyutil.o COBJS-$(CONFIG_CMD_MII) += miiphyutil.o +COBJS-$(CONFIG_PHYLIB) += miiphyutil.o COBJS-$(CONFIG_CMD_MII) += cmd_mii.o +ifdef CONFIG_PHYLIB +COBJS-$(CONFIG_CMD_MII) += cmd_mdio.o +endif COBJS-$(CONFIG_CMD_MISC) += cmd_misc.o COBJS-$(CONFIG_CMD_MMC) += cmd_mmc.o +COBJS-$(CONFIG_CMD_MMC_SPI) += cmd_mmc_spi.o COBJS-$(CONFIG_MP) += cmd_mp.o COBJS-$(CONFIG_CMD_MTDPARTS) += cmd_mtdparts.o COBJS-$(CONFIG_CMD_NAND) += cmd_nand.o @@ -133,6 +141,7 @@ COBJS-$(CONFIG_CMD_REISER) += cmd_reiser.o COBJS-$(CONFIG_CMD_SATA) += cmd_sata.o COBJS-$(CONFIG_CMD_SF) += cmd_sf.o COBJS-$(CONFIG_CMD_SCSI) += cmd_scsi.o +COBJS-$(CONFIG_CMD_SHA1SUM) += cmd_sha1sum.o COBJS-$(CONFIG_CMD_SETEXPR) += cmd_setexpr.o COBJS-$(CONFIG_CMD_SPI) += cmd_spi.o COBJS-$(CONFIG_CMD_SPIBOOTLDR) += cmd_spibootldr.o @@ -143,6 +152,7 @@ COBJS-$(CONFIG_CMD_TSI148) += cmd_tsi148.o COBJS-$(CONFIG_CMD_UBI) += cmd_ubi.o COBJS-$(CONFIG_CMD_UBIFS) += cmd_ubifs.o COBJS-$(CONFIG_CMD_UNIVERSE) += cmd_universe.o +COBJS-$(CONFIG_CMD_UNZIP) += cmd_unzip.o ifdef CONFIG_CMD_USB COBJS-y += cmd_usb.o COBJS-y += usb.o diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c index bba7374..1d76ffa 100644 --- a/common/cmd_bdinfo.c +++ b/common/cmd_bdinfo.c @@ -304,7 +304,7 @@ int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) #elif defined(CONFIG_AVR32) -int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { bd_t *bd = gd->bd; diff --git a/common/cmd_boot.c b/common/cmd_boot.c index 7b603d3..0afd939 100644 --- a/common/cmd_boot.c +++ b/common/cmd_boot.c @@ -28,6 +28,8 @@ #include <command.h> #include <net.h> +#ifdef CONFIG_CMD_GO + /* Allow ports to override the default behavior */ __attribute__((weak)) unsigned long do_go_exec (ulong (*entry)(int, char * const []), int argc, char * const argv[]) @@ -67,6 +69,8 @@ U_BOOT_CMD( " passing 'arg' as arguments" ); +#endif + U_BOOT_CMD( reset, 1, 0, do_reset, "Perform RESET of the CPU", diff --git a/common/cmd_bootldr.c b/common/cmd_bootldr.c index 535b931..bc5c1f9 100644 --- a/common/cmd_bootldr.c +++ b/common/cmd_bootldr.c @@ -24,7 +24,7 @@ static bool ldr_valid_signature(uint8_t *data) #if defined(__ADSPBF561__) /* BF56x has a 4 byte global header */ - if (data[3] == 0xA0) + if (data[3] == (GFLAG_56X_SIGN_MAGIC << (GFLAG_56X_SIGN_SHIFT - 24))) return true; #elif defined(__ADSPBF531__) || defined(__ADSPBF532__) || defined(__ADSPBF533__) || \ @@ -53,11 +53,6 @@ static bool ldr_valid_signature(uint8_t *data) * LDRs from random memory addresses. So whenever possible, use that. In * the older cases (BF53x/BF561), parse the LDR format ourselves. */ -#define ZEROFILL 0x0001 -#define RESVECT 0x0002 -#define INIT 0x0008 -#define IGNORE 0x0010 -#define FINAL 0x8000 static void ldr_load(uint8_t *base_addr) { #if defined(__ADSPBF531__) || defined(__ADSPBF532__) || defined(__ADSPBF533__) || \ @@ -76,7 +71,7 @@ static void ldr_load(uint8_t *base_addr) # endif memmove(&flags, base_addr + 8, sizeof(flags)); - bfin_write_EVT1(flags & RESVECT ? 0xFFA00000 : 0xFFA08000); + bfin_write_EVT1(flags & BFLAG_53X_RESVECT ? 0xFFA00000 : 0xFFA08000); do { /* block header may not be aligned */ @@ -85,24 +80,24 @@ static void ldr_load(uint8_t *base_addr) memmove(&flags, base_addr+8, sizeof(flags)); base_addr += sizeof(addr) + sizeof(count) + sizeof(flags); - printf("loading to 0x%08x (0x%x bytes) flags: 0x%04x\n", + printf("loading to 0x%08x (%#x bytes) flags: 0x%04x\n", addr, count, flags); - if (!(flags & IGNORE)) { - if (flags & ZEROFILL) + if (!(flags & BFLAG_53X_IGNORE)) { + if (flags & BFLAG_53X_ZEROFILL) memset((void *)addr, 0x00, count); else memcpy((void *)addr, base_addr, count); - if (flags & INIT) { + if (flags & BFLAG_53X_INIT) { void (*init)(void) = (void *)addr; init(); } } - if (!(flags & ZEROFILL)) + if (!(flags & BFLAG_53X_ZEROFILL)) base_addr += count; - } while (!(flags & FINAL)); + } while (!(flags & BFLAG_53X_FINAL)); #endif } diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c index 18019d6..1966da4 100644 --- a/common/cmd_bootm.c +++ b/common/cmd_bootm.c @@ -344,7 +344,7 @@ static int bootm_load_os(image_info_t os, ulong *load_end, int boot_progress) switch (comp) { case IH_COMP_NONE: - if (load == blob_start) { + if (load == blob_start || load == image_start) { printf (" XIP %s ... ", type_name); } else { printf (" Loading %s ... ", type_name); @@ -544,11 +544,12 @@ int do_bootm_subcommand (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv } break; #endif -#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_SYS_BOOTMAPSZ) +#if defined(CONFIG_OF_LIBFDT) case BOOTM_STATE_FDT: { - ulong bootmap_base = getenv_bootm_low(); - ret = boot_relocate_fdt(&images.lmb, bootmap_base, + boot_fdt_add_mem_rsv_regions(&images.lmb, + images.ft_addr); + ret = boot_relocate_fdt(&images.lmb, &images.ft_addr, &images.ft_len); break; } diff --git a/common/cmd_gpio.c b/common/cmd_gpio.c new file mode 100644 index 0000000..9cc790a --- /dev/null +++ b/common/cmd_gpio.c @@ -0,0 +1,89 @@ +/* + * Control GPIO pins on the fly + * + * Copyright (c) 2008-2011 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include <common.h> +#include <command.h> + +#include <asm/gpio.h> + +#ifndef name_to_gpio +#define name_to_gpio(name) simple_strtoul(name, NULL, 10) +#endif + +enum gpio_cmd { + GPIO_INPUT, + GPIO_SET, + GPIO_CLEAR, + GPIO_TOGGLE, +}; + +static int do_gpio(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + int gpio; + enum gpio_cmd sub_cmd; + ulong value; + const char *str_cmd, *str_gpio; + +#ifdef gpio_status + if (argc == 2 && !strcmp(argv[1], "status")) { + gpio_status(); + return 0; + } +#endif + + if (argc != 3) + show_usage: + return cmd_usage(cmdtp); + str_cmd = argv[1]; + str_gpio = argv[2]; + + /* parse the behavior */ + switch (*str_cmd) { + case 'i': sub_cmd = GPIO_INPUT; break; + case 's': sub_cmd = GPIO_SET; break; + case 'c': sub_cmd = GPIO_CLEAR; break; + case 't': sub_cmd = GPIO_TOGGLE; break; + default: goto show_usage; + } + + /* turn the gpio name into a gpio number */ + gpio = name_to_gpio(str_gpio); + if (gpio < 0) + goto show_usage; + + /* grab the pin before we tweak it */ + if (gpio_request(gpio, "cmd_gpio")) { + printf("gpio: requesting pin %u failed\n", gpio); + return -1; + } + + /* finally, let's do it: set direction and exec command */ + if (sub_cmd == GPIO_INPUT) { + gpio_direction_input(gpio); + value = gpio_get_value(gpio); + } else { + switch (sub_cmd) { + case GPIO_SET: value = 1; break; + case GPIO_CLEAR: value = 0; break; + case GPIO_TOGGLE: value = !gpio_get_value(gpio); break; + default: goto show_usage; + } + gpio_direction_output(gpio, value); + } + printf("gpio: pin %s (gpio %i) value is %lu\n", + str_gpio, gpio, value); + + gpio_free(gpio); + + return value; +} + +U_BOOT_CMD(gpio, 3, 0, do_gpio, + "input/set/clear/toggle gpio pins", + "<input|set|clear|toggle> <pin>\n" + " - input/set/clear/toggle the specified pin"); diff --git a/common/cmd_i2c.c b/common/cmd_i2c.c index c272b0d..d913e13 100644 --- a/common/cmd_i2c.c +++ b/common/cmd_i2c.c @@ -132,6 +132,14 @@ DECLARE_GLOBAL_DATA_PTR; #define DISP_LINE_LEN 16 +/* implement possible board specific board init */ +void __def_i2c_init_board(void) +{ + return; +} +void i2c_init_board(void) + __attribute__((weak, alias("__def_i2c_init_board"))); + /* TODO: Implement architecture-specific get/set functions */ unsigned int __def_i2c_get_bus_speed(void) { @@ -1541,6 +1549,8 @@ int i2x_mux_select_mux(int bus) mux = dev->mux; while (mux != NULL) { + /* do deblocking on each level of mux, before mux config */ + i2c_init_board(); if (i2c_write(mux->chip, 0, 0, &mux->channel, 1) != 0) { printf ("Error setting Mux: chip:%x channel: \ %x\n", mux->chip, mux->channel); @@ -1548,6 +1558,8 @@ int i2x_mux_select_mux(int bus) } mux = mux->next; } + /* do deblocking on each level of mux and after mux config */ + i2c_init_board(); return 0; } #endif /* CONFIG_I2C_MUX */ diff --git a/common/cmd_ide.c b/common/cmd_ide.c index a1f7e57..21fe1ea 100644 --- a/common/cmd_ide.c +++ b/common/cmd_ide.c @@ -160,7 +160,7 @@ static uchar ide_wait (int dev, ulong t); #define IDE_SPIN_UP_TIME_OUT 5000 /* 5 sec spin-up timeout */ static void input_data(int dev, ulong *sect_buf, int words); -static void output_data(int dev, ulong *sect_buf, int words); +static void output_data(int dev, const ulong *sect_buf, int words); static void ident_cpy (unsigned char *dest, unsigned char *src, unsigned int len); #ifndef CONFIG_SYS_ATA_PORT_ADDR @@ -517,8 +517,20 @@ __ide_outb(int dev, int port, unsigned char val) { debug ("ide_outb (dev= %d, port= 0x%x, val= 0x%02x) : @ 0x%08lx\n", dev, port, val, (ATA_CURR_BASE(dev)+CONFIG_SYS_ATA_PORT_ADDR(port))); + +#if defined(CONFIG_IDE_AHB) + if (port) { + /* write command */ + ide_write_register(dev, port, val); + } else { + /* write data */ + outb(val, (ATA_CURR_BASE(dev))); + } +#else outb(val, (ATA_CURR_BASE(dev)+CONFIG_SYS_ATA_PORT_ADDR(port))); +#endif } + void ide_outb (int dev, int port, unsigned char val) __attribute__((weak, alias("__ide_outb"))); @@ -526,7 +538,13 @@ unsigned char inline __ide_inb(int dev, int port) { uchar val; + +#if defined(CONFIG_IDE_AHB) + val = ide_read_register(dev, port); +#else val = inb((ATA_CURR_BASE(dev)+CONFIG_SYS_ATA_PORT_ADDR(port))); +#endif + debug ("ide_inb (dev= %d, port= 0x%x) : @ 0x%08lx -> 0x%02x\n", dev, port, (ATA_CURR_BASE(dev)+CONFIG_SYS_ATA_PORT_ADDR(port)), val); return val; @@ -695,6 +713,7 @@ void ide_init (void) ide_dev_desc[i].blksz=0; ide_dev_desc[i].lba=0; ide_dev_desc[i].block_read=ide_read; + ide_dev_desc[i].block_write = ide_write; if (!ide_bus_ok[IDE_BUS(i)]) continue; ide_led (led, 1); /* LED on */ @@ -856,7 +875,7 @@ input_swap_data(int dev, ulong *sect_buf, int words) #if defined(CONFIG_IDE_SWAP_IO) static void -output_data(int dev, ulong *sect_buf, int words) +output_data(int dev, const ulong *sect_buf, int words) { #if defined(CONFIG_CPC45) uchar *dbuf; @@ -900,9 +919,13 @@ output_data(int dev, ulong *sect_buf, int words) } #else /* ! CONFIG_IDE_SWAP_IO */ static void -output_data(int dev, ulong *sect_buf, int words) +output_data(int dev, const ulong *sect_buf, int words) { - outsw(ATA_CURR_BASE(dev)+ATA_DATA_REG, sect_buf, words<<1); +#if defined(CONFIG_IDE_AHB) + ide_write_data(dev, sect_buf, words); +#else + outsw(ATA_CURR_BASE(dev)+ATA_DATA_REG, sect_buf, words << 1); +#endif } #endif /* CONFIG_IDE_SWAP_IO */ @@ -960,7 +983,11 @@ input_data(int dev, ulong *sect_buf, int words) static void input_data(int dev, ulong *sect_buf, int words) { +#if defined(CONFIG_IDE_AHB) + ide_read_data(dev, sect_buf, words); +#else insw(ATA_CURR_BASE(dev)+ATA_DATA_REG, sect_buf, words << 1); +#endif } #endif /* CONFIG_IDE_SWAP_IO */ @@ -1321,7 +1348,7 @@ IDE_READ_E: /* ------------------------------------------------------------------------- */ -ulong ide_write (int device, lbaint_t blknr, ulong blkcnt, void *buffer) +ulong ide_write (int device, lbaint_t blknr, ulong blkcnt, const void *buffer) { ulong n = 0; unsigned char c; diff --git a/common/cmd_ldrinfo.c b/common/cmd_ldrinfo.c new file mode 100644 index 0000000..2aa56bd --- /dev/null +++ b/common/cmd_ldrinfo.c @@ -0,0 +1,192 @@ +/* + * U-boot - ldrinfo + * + * Copyright (c) 2010 Analog Devices Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * Licensed under the GPL-2 or later. + */ + +#include <config.h> +#include <common.h> +#include <command.h> + +#include <asm/blackfin.h> +#include <asm/mach-common/bits/bootrom.h> + +static uint32_t ldrinfo_header(const void *addr) +{ + uint32_t skip = 0; + +#if defined(__ADSPBF561__) + /* BF56x has a 4 byte global header */ + uint32_t header, sign; + static const char * const spi_speed[] = { + "500K", "1M", "2M", "??", + }; + + memcpy(&header, addr, sizeof(header)); + + sign = (header & GFLAG_56X_SIGN_MASK) >> GFLAG_56X_SIGN_SHIFT; + printf("Header: %08X ( %s-bit-flash wait:%i hold:%i spi:%s %s)\n", + header, + (header & GFLAG_56X_16BIT_FLASH) ? "16" : "8", + (header & GFLAG_56X_WAIT_MASK) >> GFLAG_56X_WAIT_SHIFT, + (header & GFLAG_56X_HOLD_MASK) >> GFLAG_56X_HOLD_SHIFT, + spi_speed[(header & GFLAG_56X_SPI_MASK) >> GFLAG_56X_SPI_SHIFT], + sign == GFLAG_56X_SIGN_MAGIC ? "" : "!!hdrsign!! "); + + skip = 4; +#endif + + /* |Block @ 12345678: 12345678 12345678 12345678 12345678 | */ +#if defined(__ADSPBF531__) || defined(__ADSPBF532__) || defined(__ADSPBF533__) || \ + defined(__ADSPBF534__) || defined(__ADSPBF536__) || defined(__ADSPBF537__) || \ + defined(__ADSPBF538__) || defined(__ADSPBF539__) || defined(__ADSPBF561__) + printf(" Address Count Flags\n"); +#else + printf(" BCode Address Count Argument\n"); +#endif + + return skip; +} + +struct ldr_flag { + uint16_t flag; + const char *desc; +}; + +static uint32_t ldrinfo_block(const void *base_addr) +{ + uint32_t count; + + printf("Block @ %08X: ", (uint32_t)base_addr); + +#if defined(__ADSPBF531__) || defined(__ADSPBF532__) || defined(__ADSPBF533__) || \ + defined(__ADSPBF534__) || defined(__ADSPBF536__) || defined(__ADSPBF537__) || \ + defined(__ADSPBF538__) || defined(__ADSPBF539__) || defined(__ADSPBF561__) + + uint32_t addr, pval; + uint16_t flags; + int i; + static const struct ldr_flag ldr_flags[] = { + { BFLAG_53X_ZEROFILL, "zerofill" }, + { BFLAG_53X_RESVECT, "resvect" }, + { BFLAG_53X_INIT, "init" }, + { BFLAG_53X_IGNORE, "ignore" }, + { BFLAG_53X_COMPRESSED, "compressed"}, + { BFLAG_53X_FINAL, "final" }, + }; + + memcpy(&addr, base_addr, sizeof(addr)); + memcpy(&count, base_addr+4, sizeof(count)); + memcpy(&flags, base_addr+8, sizeof(flags)); + + printf("%08X %08X %04X ( ", addr, count, flags); + + for (i = 0; i < ARRAY_SIZE(ldr_flags); ++i) + if (flags & ldr_flags[i].flag) + printf("%s ", ldr_flags[i].desc); + + pval = (flags & BFLAG_53X_PFLAG_MASK) >> BFLAG_53X_PFLAG_SHIFT; + if (pval) + printf("gpio%i ", pval); + pval = (flags & BFLAG_53X_PPORT_MASK) >> BFLAG_53X_PPORT_SHIFT; + if (pval) + printf("port%c ", 'e' + pval); + + if (flags & BFLAG_53X_ZEROFILL) + count = 0; + if (flags & BFLAG_53X_FINAL) + count = 0; + else + count += sizeof(addr) + sizeof(count) + sizeof(flags); + +#else + + const uint8_t *raw8 = base_addr; + uint32_t bcode, addr, arg, sign, chk; + int i; + static const struct ldr_flag ldr_flags[] = { + { BFLAG_SAFE, "safe" }, + { BFLAG_AUX, "aux" }, + { BFLAG_FILL, "fill" }, + { BFLAG_QUICKBOOT, "quickboot" }, + { BFLAG_CALLBACK, "callback" }, + { BFLAG_INIT, "init" }, + { BFLAG_IGNORE, "ignore" }, + { BFLAG_INDIRECT, "indirect" }, + { BFLAG_FIRST, "first" }, + { BFLAG_FINAL, "final" }, + }; + + memcpy(&bcode, base_addr, sizeof(bcode)); + memcpy(&addr, base_addr+4, sizeof(addr)); + memcpy(&count, base_addr+8, sizeof(count)); + memcpy(&arg, base_addr+12, sizeof(arg)); + + printf("%08X %08X %08X %08X ( ", bcode, addr, count, arg); + + if (addr % 4) + printf("!!addralgn!! "); + if (count % 4) + printf("!!cntalgn!! "); + + sign = (bcode & BFLAG_HDRSIGN_MASK) >> BFLAG_HDRSIGN_SHIFT; + if (sign != BFLAG_HDRSIGN_MAGIC) + printf("!!hdrsign!! "); + + chk = 0; + for (i = 0; i < 16; ++i) + chk ^= raw8[i]; + if (chk) + printf("!!hdrchk!! "); + + printf("dma:%i ", bcode & BFLAG_DMACODE_MASK); + + for (i = 0; i < ARRAY_SIZE(ldr_flags); ++i) + if (bcode & ldr_flags[i].flag) + printf("%s ", ldr_flags[i].desc); + + if (bcode & BFLAG_FILL) + count = 0; + if (bcode & BFLAG_FINAL) + count = 0; + else + count += sizeof(bcode) + sizeof(addr) + sizeof(count) + sizeof(arg); + +#endif + + printf(")\n"); + + return count; +} + +static int do_ldrinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + const void *addr; + uint32_t skip; + + /* Get the address */ + if (argc < 2) + addr = (void *)load_addr; + else + addr = (void *)simple_strtoul(argv[1], NULL, 16); + + /* Walk the LDR */ + addr += ldrinfo_header(addr); + do { + skip = ldrinfo_block(addr); + addr += skip; + } while (skip); + + return 0; +} + +U_BOOT_CMD( + ldrinfo, 2, 0, do_ldrinfo, + "validate ldr image in memory", + "[addr]\n" +); diff --git a/common/cmd_led.c b/common/cmd_led.c new file mode 100644 index 0000000..f1e8a62 --- /dev/null +++ b/common/cmd_led.c @@ -0,0 +1,153 @@ +/* + * (C) Copyright 2010 + * Jason Kridner <jkridner@beagleboard.org> + * + * Based on cmd_led.c patch from: + * http://www.mail-archive.com/u-boot@lists.denx.de/msg06873.html + * (C) Copyright 2008 + * Ulf Samuelsson <ulf.samuelsson@atmel.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <config.h> +#include <command.h> +#include <status_led.h> + +struct led_tbl_s { + char *string; /* String for use in the command */ + led_id_t mask; /* Mask used for calling __led_set() */ + void (*on)(void); /* Optional fucntion for turning LED on */ + void (*off)(void); /* Optional fucntion for turning LED on */ +}; + +typedef struct led_tbl_s led_tbl_t; + +static const led_tbl_t led_commands[] = { +#ifdef CONFIG_BOARD_SPECIFIC_LED +#ifdef STATUS_LED_BIT + { "0", STATUS_LED_BIT, NULL, NULL }, +#endif +#ifdef STATUS_LED_BIT1 + { "1", STATUS_LED_BIT1, NULL, NULL }, +#endif +#ifdef STATUS_LED_BIT2 + { "2", STATUS_LED_BIT2, NULL, NULL }, +#endif +#ifdef STATUS_LED_BIT3 + { "3", STATUS_LED_BIT3, NULL, NULL }, +#endif +#endif +#ifdef STATUS_LED_GREEN + { "green", STATUS_LED_GREEN, green_LED_off, green_LED_on }, +#endif +#ifdef STATUS_LED_YELLOW + { "yellow", STATUS_LED_YELLOW, yellow_LED_off, yellow_LED_on }, +#endif +#ifdef STATUS_LED_RED + { "red", STATUS_LED_RED, red_LED_off, red_LED_on }, +#endif +#ifdef STATUS_LED_BLUE + { "blue", STATUS_LED_BLUE, blue_LED_off, blue_LED_on }, +#endif + { NULL, 0, NULL, NULL } +}; + +int str_onoff (char *var) +{ + if (strcmp(var, "off") == 0) { + return 0; + } + if (strcmp(var, "on") == 0) { + return 1; + } + return -1; +} + +int do_led (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + int state, i; + + /* Validate arguments */ + if ((argc != 3)) { + return cmd_usage(cmdtp); + } + + state = str_onoff(argv[2]); + if (state < 0) { + return cmd_usage(cmdtp); + } + + for (i = 0; led_commands[i].string; i++) { + if ((strcmp("all", argv[1]) == 0) || + (strcmp(led_commands[i].string, argv[1]) == 0)) { + if (led_commands[i].on) { + if (state) { + led_commands[i].on(); + } else { + led_commands[i].off(); + } + } else { + __led_set(led_commands[i].mask, state); + } + break; + } + } + + /* If we ran out of matches, print Usage */ + if (!led_commands[i].string && !(strcmp("all", argv[1]) == 0)) { + return cmd_usage(cmdtp); + } + + return 0; +} + +U_BOOT_CMD( + led, 3, 1, do_led, + "led\t- [" +#ifdef CONFIG_BOARD_SPECIFIC_LED +#ifdef STATUS_LED_BIT + "0|" +#endif +#ifdef STATUS_LED_BIT1 + "1|" +#endif +#ifdef STATUS_LED_BIT2 + "2|" +#endif +#ifdef STATUS_LED_BIT3 + "3|" +#endif +#endif +#ifdef STATUS_LED_GREEN + "green|" +#endif +#ifdef STATUS_LED_YELLOW + "yellow|" +#endif +#ifdef STATUS_LED_RED + "red|" +#endif +#ifdef STATUS_LED_BLUE + "blue|" +#endif + "all] [on|off]\n", + "led [led_name] [on|off] sets or clears led(s)\n" +); diff --git a/common/cmd_md5sum.c b/common/cmd_md5sum.c new file mode 100644 index 0000000..d6ebb80 --- /dev/null +++ b/common/cmd_md5sum.c @@ -0,0 +1,53 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <command.h> +#include <u-boot/md5.h> + +static int do_md5sum(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + unsigned long addr, len; + unsigned int i; + u8 output[16]; + + if (argc < 3) + return cmd_usage(cmdtp); + + addr = simple_strtoul(argv[1], NULL, 16); + len = simple_strtoul(argv[2], NULL, 16); + + md5((unsigned char *) addr, len, output); + printf("md5 for %08lx ... %08lx ==> ", addr, addr + len - 1); + for (i = 0; i < 16; i++) + printf("%02x", output[i]); + printf("\n"); + + return 0; +} + +U_BOOT_CMD( + md5sum, 3, 1, do_md5sum, + "compute MD5 message digest", + "address count" +); diff --git a/common/cmd_mdio.c b/common/cmd_mdio.c new file mode 100644 index 0000000..4ac9de4 --- /dev/null +++ b/common/cmd_mdio.c @@ -0,0 +1,286 @@ +/* + * (C) Copyright 2011 Freescale Semiconductor, Inc + * Andy Fleming + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * MDIO Commands + */ + +#include <common.h> +#include <command.h> +#include <miiphy.h> +#include <phy.h> + + +static char last_op[2]; +static uint last_data; +static uint last_addr_lo; +static uint last_addr_hi; +static uint last_devad_lo; +static uint last_devad_hi; +static uint last_reg_lo; +static uint last_reg_hi; + +static int extract_range(char *input, int *plo, int *phi) +{ + char *end; + *plo = simple_strtol(input, &end, 0); + if (end == input) + return -1; + + if ((*end == '-') && *(++end)) + *phi = simple_strtol(end, NULL, 0); + else if (*end == '\0') + *phi = *plo; + else + return -1; + + return 0; +} + +int mdio_write_ranges(struct mii_dev *bus, int addrlo, + int addrhi, int devadlo, int devadhi, + int reglo, int reghi, unsigned short data) +{ + int addr, devad, reg; + int err = 0; + + for (addr = addrlo; addr <= addrhi; addr++) { + for (devad = devadlo; devad <= devadhi; devad++) { + for (reg = reglo; reg <= reghi; reg++) { + err = bus->write(bus, addr, devad, reg, data); + + if (err) + goto err_out; + } + } + } + +err_out: + return err; +} + +int mdio_read_ranges(struct mii_dev *bus, int addrlo, + int addrhi, int devadlo, int devadhi, + int reglo, int reghi) +{ + int addr, devad, reg; + + printf("Reading from bus %s\n", bus->name); + for (addr = addrlo; addr <= addrhi; addr++) { + printf("PHY at address %d:\n", addr); + + for (devad = devadlo; devad <= devadhi; devad++) { + for (reg = reglo; reg <= reghi; reg++) { + int val; + + val = bus->read(bus, addr, devad, reg); + if (val < 0) { + printf("Error\n"); + + return val; + } + + if (devad >= 0) + printf("%d.", devad); + + printf("%d - 0x%x\n", reg, val & 0xffff); + } + } + } + + return 0; +} + +/* The register will be in the form [a[-b].]x[-y] */ +int extract_reg_range(char *input, int *devadlo, int *devadhi, + int *reglo, int *reghi) +{ + char *regstr; + + /* use strrchr to find the last string after a '.' */ + regstr = strrchr(input, '.'); + + /* If it exists, extract the devad(s) */ + if (regstr) { + char devadstr[32]; + + strncpy(devadstr, input, regstr - input); + devadstr[regstr - input] = '\0'; + + if (extract_range(devadstr, devadlo, devadhi)) + return -1; + + regstr++; + } else { + /* Otherwise, we have no devad, and we just got regs */ + *devadlo = *devadhi = MDIO_DEVAD_NONE; + + regstr = input; + } + + return extract_range(regstr, reglo, reghi); +} + +int extract_phy_range(char *const argv[], int argc, struct mii_dev **bus, + int *addrlo, int *addrhi) +{ + struct phy_device *phydev; + + if ((argc < 1) || (argc > 2)) + return -1; + + /* If there are two arguments, it's busname addr */ + if (argc == 2) { + *bus = miiphy_get_dev_by_name(argv[0]); + + if (!*bus) + return -1; + + return extract_range(argv[1], addrlo, addrhi); + } + + /* It must be one argument, here */ + + /* + * This argument can be one of two things: + * 1) Ethernet device name + * 2) Just an address (use the previously-used bus) + * + * We check all buses for a PHY which is connected to an ethernet + * device by the given name. If none are found, we call + * extract_range() on the string, and see if it's an address range. + */ + phydev = mdio_phydev_for_ethname(argv[0]); + + if (phydev) { + *addrlo = *addrhi = phydev->addr; + *bus = phydev->bus; + + return 0; + } + + /* It's an address or nothing useful */ + return extract_range(argv[0], addrlo, addrhi); +} + +/* ---------------------------------------------------------------- */ +static int do_mdio(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + char op[2]; + int addrlo, addrhi, reglo, reghi, devadlo, devadhi; + unsigned short data; + int pos = argc - 1; + struct mii_dev *bus; + + if (argc < 2) + return cmd_usage(cmdtp); + + /* + * We use the last specified parameters, unless new ones are + * entered. + */ + op[0] = argv[1][0]; + addrlo = last_addr_lo; + addrhi = last_addr_hi; + devadlo = last_devad_lo; + devadhi = last_devad_hi; + reglo = last_reg_lo; + reghi = last_reg_hi; + data = last_data; + + bus = mdio_get_current_dev(); + + if (flag & CMD_FLAG_REPEAT) + op[0] = last_op[0]; + + switch (op[0]) { + case 'w': + if (pos > 1) + data = simple_strtoul(argv[pos--], NULL, 16); + case 'r': + if (pos > 1) + if (extract_reg_range(argv[pos--], &devadlo, &devadhi, + ®lo, ®hi)) + return -1; + + default: + if (pos > 1) + if (extract_phy_range(&(argv[2]), pos - 1, &bus, + &addrlo, &addrhi)) + return -1; + + break; + } + + if (op[0] == 'l') { + mdio_list_devices(); + + return 0; + } + + /* Save the chosen bus */ + miiphy_set_current_dev(bus->name); + + switch (op[0]) { + case 'w': + mdio_write_ranges(bus, addrlo, addrhi, devadlo, devadhi, + reglo, reghi, data); + break; + + case 'r': + mdio_read_ranges(bus, addrlo, addrhi, devadlo, devadhi, + reglo, reghi); + break; + } + + /* + * Save the parameters for repeats. + */ + last_op[0] = op[0]; + last_addr_lo = addrlo; + last_addr_hi = addrhi; + last_devad_lo = devadlo; + last_devad_hi = devadhi; + last_reg_lo = reglo; + last_reg_hi = reghi; + last_data = data; + + return 0; +} + +/***************************************************/ + +U_BOOT_CMD( + mdio, 6, 1, do_mdio, + "MDIO utility commands", + "list - List MDIO buses\n" + "mdio read <phydev> [<devad>.]<reg> - " + "read PHY's register at <devad>.<reg>\n" + "mdio write <phydev> [<devad>.]<reg> <data> - " + "write PHY's register at <devad>.<reg>\n" + "<phydev> may be:\n" + " <busname> <addr>\n" + " <addr>\n" + " <eth name>\n" + "<addr> <devad>, and <reg> may be ranges, e.g. 1-5.4-0x1f.\n" +); diff --git a/common/cmd_mem.c b/common/cmd_mem.c index 4b524cf..a5576aa 100644 --- a/common/cmd_mem.c +++ b/common/cmd_mem.c @@ -34,9 +34,6 @@ #endif #include <watchdog.h> -#include <u-boot/md5.h> -#include <sha1.h> - #ifdef CMD_MEM_DEBUG #define PRINTF(fmt,args...) printf (fmt ,##args) #else @@ -1077,6 +1074,8 @@ mod_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char * const argv[]) return 0; } +#ifdef CONFIG_CMD_CRC32 + #ifndef CONFIG_CRC32_VERIFY int do_mem_crc (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) @@ -1161,83 +1160,8 @@ usage: } #endif /* CONFIG_CRC32_VERIFY */ -#ifdef CONFIG_CMD_MD5SUM -int do_md5sum(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - unsigned long addr, len; - unsigned int i; - u8 output[16]; - - if (argc < 3) - return cmd_usage(cmdtp); - - addr = simple_strtoul(argv[1], NULL, 16); - len = simple_strtoul(argv[2], NULL, 16); - - md5((unsigned char *) addr, len, output); - printf("md5 for %08lx ... %08lx ==> ", addr, addr + len - 1); - for (i = 0; i < 16; i++) - printf("%02x", output[i]); - printf("\n"); - - return 0; -} -#endif - -#ifdef CONFIG_CMD_SHA1SUM -int do_sha1sum(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - unsigned long addr, len; - unsigned int i; - u8 output[20]; - - if (argc < 3) - return cmd_usage(cmdtp); - - addr = simple_strtoul(argv[1], NULL, 16); - len = simple_strtoul(argv[2], NULL, 16); - - sha1_csum((unsigned char *) addr, len, output); - printf("SHA1 for %08lx ... %08lx ==> ", addr, addr + len - 1); - for (i = 0; i < 20; i++) - printf("%02x", output[i]); - printf("\n"); - - return 0; -} #endif -#ifdef CONFIG_CMD_UNZIP -int do_unzip ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - unsigned long src, dst; - unsigned long src_len = ~0UL, dst_len = ~0UL; - char buf[32]; - - switch (argc) { - case 4: - dst_len = simple_strtoul(argv[3], NULL, 16); - /* fall through */ - case 3: - src = simple_strtoul(argv[1], NULL, 16); - dst = simple_strtoul(argv[2], NULL, 16); - break; - default: - return cmd_usage(cmdtp); - } - - if (gunzip((void *) dst, dst_len, (void *) src, &src_len) != 0) - return 1; - - printf("Uncompressed size: %ld = 0x%lX\n", src_len, src_len); - sprintf(buf, "%lX", src_len); - setenv("filesize", buf); - - return 0; -} -#endif /* CONFIG_CMD_UNZIP */ - - /**************************************************/ U_BOOT_CMD( md, 3, 1, do_mem_md, @@ -1277,6 +1201,8 @@ U_BOOT_CMD( "[.b, .w, .l] addr1 addr2 count" ); +#ifdef CONFIG_CMD_CRC32 + #ifndef CONFIG_CRC32_VERIFY U_BOOT_CMD( @@ -1296,6 +1222,8 @@ U_BOOT_CMD( #endif /* CONFIG_CRC32_VERIFY */ +#endif + U_BOOT_CMD( base, 2, 1, do_mem_base, "print or set address offset", @@ -1336,27 +1264,3 @@ U_BOOT_CMD( "[.b, .w, .l] address value delay(ms)" ); #endif /* CONFIG_MX_CYCLIC */ - -#ifdef CONFIG_CMD_MD5SUM -U_BOOT_CMD( - md5sum, 3, 1, do_md5sum, - "compute MD5 message digest", - "address count" -); -#endif - -#ifdef CONFIG_CMD_SHA1SUM -U_BOOT_CMD( - sha1sum, 3, 1, do_sha1sum, - "compute SHA1 message digest", - "address count" -); -#endif /* CONFIG_CMD_SHA1SUM */ - -#ifdef CONFIG_CMD_UNZIP -U_BOOT_CMD( - unzip, 4, 1, do_unzip, - "unzip a memory region", - "srcaddr dstaddr [dstsize]" -); -#endif /* CONFIG_CMD_UNZIP */ diff --git a/common/cmd_mmc.c b/common/cmd_mmc.c index 4323f76..6166749 100644 --- a/common/cmd_mmc.c +++ b/common/cmd_mmc.c @@ -104,7 +104,8 @@ static void print_mmcinfo(struct mmc *mmc) (mmc->version >> 4) & 0xf, mmc->version & 0xf); printf("High Capacity: %s\n", mmc->high_capacity ? "Yes" : "No"); - printf("Capacity: %lld\n", mmc->capacity); + puts("Capacity: "); + print_size(mmc->capacity, "\n"); printf("Bus Width: %d-bit\n", mmc->bus_width); } diff --git a/common/cmd_mmc_spi.c b/common/cmd_mmc_spi.c new file mode 100644 index 0000000..cfd0fb1 --- /dev/null +++ b/common/cmd_mmc_spi.c @@ -0,0 +1,89 @@ +/* + * Command for mmc_spi setup. + * + * Copyright (C) 2010 Thomas Chou <thomas@wytron.com.tw> + * Licensed under the GPL-2 or later. + */ + +#include <common.h> +#include <mmc.h> +#include <spi.h> + +#ifndef CONFIG_MMC_SPI_BUS +# define CONFIG_MMC_SPI_BUS 0 +#endif +#ifndef CONFIG_MMC_SPI_CS +# define CONFIG_MMC_SPI_CS 1 +#endif +/* in SPI mode, MMC speed limit is 20MHz, while SD speed limit is 25MHz */ +#ifndef CONFIG_MMC_SPI_SPEED +# define CONFIG_MMC_SPI_SPEED 25000000 +#endif +/* MMC and SD specs only seem to care that sampling is on the + * rising edge ... meaning SPI modes 0 or 3. So either SPI mode + * should be legit. We'll use mode 0 since the steady state is 0, + * which is appropriate for hotplugging, unless the platform data + * specify mode 3 (if hardware is not compatible to mode 0). + */ +#ifndef CONFIG_MMC_SPI_MODE +# define CONFIG_MMC_SPI_MODE SPI_MODE_0 +#endif + +static int do_mmc_spi(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + uint bus = CONFIG_MMC_SPI_BUS; + uint cs = CONFIG_MMC_SPI_CS; + uint speed = CONFIG_MMC_SPI_SPEED; + uint mode = CONFIG_MMC_SPI_MODE; + char *endp; + struct mmc *mmc; + + if (argc < 2) + goto usage; + + cs = simple_strtoul(argv[1], &endp, 0); + if (*argv[1] == 0 || (*endp != 0 && *endp != ':')) + goto usage; + if (*endp == ':') { + if (endp[1] == 0) + goto usage; + bus = cs; + cs = simple_strtoul(endp + 1, &endp, 0); + if (*endp != 0) + goto usage; + } + if (argc >= 3) { + speed = simple_strtoul(argv[2], &endp, 0); + if (*argv[2] == 0 || *endp != 0) + goto usage; + } + if (argc >= 4) { + mode = simple_strtoul(argv[3], &endp, 16); + if (*argv[3] == 0 || *endp != 0) + goto usage; + } + if (!spi_cs_is_valid(bus, cs)) { + printf("Invalid SPI bus %u cs %u\n", bus, cs); + return 1; + } + + mmc = mmc_spi_init(bus, cs, speed, mode); + if (!mmc) { + printf("Failed to create MMC Device\n"); + return 1; + } + printf("%s: %d at %u:%u hz %u mode %u\n", mmc->name, mmc->block_dev.dev, + bus, cs, speed, mode); + mmc_init(mmc); + return 0; + +usage: + cmd_usage(cmdtp); + return 1; +} + +U_BOOT_CMD( + mmc_spi, 4, 0, do_mmc_spi, + "mmc_spi setup", + "[bus:]cs [hz] [mode] - setup mmc_spi device" +); diff --git a/common/cmd_nvedit.c b/common/cmd_nvedit.c index fb69c24..aa9de3a 100644 --- a/common/cmd_nvedit.c +++ b/common/cmd_nvedit.c @@ -4,7 +4,9 @@ * * (C) Copyright 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com> * Andreas Heppel <aheppel@sysgo.de> - + * + * Copyright 2011 Freescale Semiconductor, Inc. + * * See file CREDITS for list of people who contributed to this * project. * @@ -54,18 +56,18 @@ DECLARE_GLOBAL_DATA_PTR; -#if !defined(CONFIG_ENV_IS_IN_EEPROM) && \ - !defined(CONFIG_ENV_IS_IN_FLASH) && \ - !defined(CONFIG_ENV_IS_IN_DATAFLASH) && \ - !defined(CONFIG_ENV_IS_IN_MG_DISK) && \ - !defined(CONFIG_ENV_IS_IN_MMC) && \ - !defined(CONFIG_ENV_IS_IN_NAND) && \ - !defined(CONFIG_ENV_IS_IN_NVRAM) && \ - !defined(CONFIG_ENV_IS_IN_ONENAND) && \ - !defined(CONFIG_ENV_IS_IN_SPI_FLASH) && \ - !defined(CONFIG_ENV_IS_NOWHERE) +#if !defined(CONFIG_ENV_IS_IN_EEPROM) && \ + !defined(CONFIG_ENV_IS_IN_FLASH) && \ + !defined(CONFIG_ENV_IS_IN_DATAFLASH) && \ + !defined(CONFIG_ENV_IS_IN_MG_DISK) && \ + !defined(CONFIG_ENV_IS_IN_MMC) && \ + !defined(CONFIG_ENV_IS_IN_NAND) && \ + !defined(CONFIG_ENV_IS_IN_NVRAM) && \ + !defined(CONFIG_ENV_IS_IN_ONENAND) && \ + !defined(CONFIG_ENV_IS_IN_SPI_FLASH) && \ + !defined(CONFIG_ENV_IS_NOWHERE) # error Define one of CONFIG_ENV_IS_IN_{EEPROM|FLASH|DATAFLASH|ONENAND|\ -SPI_FLASH|MG_DISK|NVRAM|MMC|NOWHERE} +SPI_FLASH|MG_DISK|NVRAM|MMC} or CONFIG_ENV_IS_NOWHERE #endif #define XMK_STR(x) #x @@ -93,7 +95,7 @@ static const unsigned long baudrate_table[] = CONFIG_SYS_BAUDRATE_TABLE; */ static int env_id = 1; -int get_env_id (void) +int get_env_id(void) { return env_id; } @@ -116,7 +118,7 @@ static int env_print(char *name) hsearch_r(e, FIND, &ep, &env_htab); if (ep == NULL) return 0; - len = printf ("%s=%s\n", ep->key, ep->data); + len = printf("%s=%s\n", ep->key, ep->data); return len; } @@ -160,6 +162,37 @@ int do_env_print (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return rcode; } +#ifdef CONFIG_CMD_GREPENV +static int do_env_grep (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + ENTRY *match; + unsigned char matched[env_htab.size / 8]; + int rcode = 1, arg = 1, idx; + + if (argc < 2) + return cmd_usage(cmdtp); + + memset(matched, 0, env_htab.size / 8); + + while (arg <= argc) { + idx = 0; + while ((idx = hstrstr_r(argv[arg], idx, &match, &env_htab))) { + if (!(matched[idx / 8] & (1 << (idx & 7)))) { + puts(match->key); + puts("="); + puts(match->data); + puts("\n"); + } + matched[idx / 8] |= 1 << (idx & 7); + rcode = 0; + } + arg++; + } + + return rcode; +} +#endif + /* * Set a new environment variable, * or replace or delete an existing one. @@ -176,7 +209,7 @@ int _do_env_set (int flag, int argc, char * const argv[]) name = argv[1]; if (strchr(name, '=')) { - printf ("## Error: illegal character '=' in variable name \"%s\"\n", name); + printf("## Error: illegal character '=' in variable name \"%s\"\n", name); return 1; } @@ -189,13 +222,12 @@ int _do_env_set (int flag, int argc, char * const argv[]) hsearch_r(e, FIND, &ep, &env_htab); /* Check for console redirection */ - if (strcmp(name,"stdin") == 0) { + if (strcmp(name, "stdin") == 0) console = stdin; - } else if (strcmp(name,"stdout") == 0) { + else if (strcmp(name, "stdout") == 0) console = stdout; - } else if (strcmp(name,"stderr") == 0) { + else if (strcmp(name, "stderr") == 0) console = stderr; - } if (console != -1) { if (argc < 3) { /* Cannot delete it! */ @@ -209,11 +241,11 @@ int _do_env_set (int flag, int argc, char * const argv[]) return i; #else /* Try assigning specified device */ - if (console_assign (console, argv[2]) < 0) + if (console_assign(console, argv[2]) < 0) return 1; #ifdef CONFIG_SERIAL_MULTI - if (serial_assign (argv[2]) < 0) + if (serial_assign(argv[2]) < 0) return 1; #endif #endif /* CONFIG_CONSOLE_MUX */ @@ -225,28 +257,28 @@ int _do_env_set (int flag, int argc, char * const argv[]) */ if (ep) { /* variable exists */ #ifndef CONFIG_ENV_OVERWRITE - if ((strcmp (name, "serial#") == 0) || - ((strcmp (name, "ethaddr") == 0) + if ((strcmp(name, "serial#") == 0) || + ((strcmp(name, "ethaddr") == 0) #if defined(CONFIG_OVERWRITE_ETHADDR_ONCE) && defined(CONFIG_ETHADDR) - && (strcmp (ep->data,MK_STR(CONFIG_ETHADDR)) != 0) + && (strcmp(ep->data, MK_STR(CONFIG_ETHADDR)) != 0) #endif /* CONFIG_OVERWRITE_ETHADDR_ONCE && CONFIG_ETHADDR */ ) ) { - printf ("Can't overwrite \"%s\"\n", name); + printf("Can't overwrite \"%s\"\n", name); return 1; } #endif /* * Switch to new baudrate if new baudrate is supported */ - if (strcmp(name,"baudrate") == 0) { + if (strcmp(name, "baudrate") == 0) { int baudrate = simple_strtoul(argv[2], NULL, 10); int i; - for (i=0; i<N_BAUDRATES; ++i) { + for (i = 0; i < N_BAUDRATES; ++i) { if (baudrate == baudrate_table[i]) break; } if (i == N_BAUDRATES) { - printf ("## Baudrate %d bps not supported\n", + printf("## Baudrate %d bps not supported\n", baudrate); return 1; } @@ -258,11 +290,11 @@ int _do_env_set (int flag, int argc, char * const argv[]) gd->bd->bi_baudrate = baudrate; #endif - serial_setbrg (); + serial_setbrg(); udelay(50000); for (;;) { if (getc() == '\r') - break; + break; } } } @@ -276,14 +308,15 @@ int _do_env_set (int flag, int argc, char * const argv[]) /* * Insert / replace new value */ - for (i=2,len=0; i<argc; ++i) { + for (i = 2, len = 0; i < argc; ++i) len += strlen(argv[i]) + 1; - } - if ((value = malloc(len)) == NULL) { + + value = malloc(len); + if (value == NULL) { printf("## Can't malloc %d bytes\n", len); return 1; } - for (i=2,s=value; i<argc; ++i) { + for (i = 2, s = value; i < argc; ++i) { char *v = argv[i]; while ((*s++ = *v++) != '\0') @@ -308,12 +341,12 @@ int _do_env_set (int flag, int argc, char * const argv[]) * entry in the environment is changed */ - if (strcmp(name,"ipaddr") == 0) { + if (strcmp(name, "ipaddr") == 0) { char *s = argv[2]; /* always use only one arg */ char *e; unsigned long addr; bd->bi_ip_addr = 0; - for (addr=0, i=0; i<4; ++i) { + for (addr = 0, i = 0; i < 4; ++i) { ulong val = s ? simple_strtoul(s, &e, 10) : 0; addr <<= 8; addr |= (val & 0xFF); @@ -321,20 +354,20 @@ int _do_env_set (int flag, int argc, char * const argv[]) } bd->bi_ip_addr = htonl(addr); return 0; - } else if (strcmp(argv[1],"loadaddr") == 0) { + } else if (strcmp(argv[1], "loadaddr") == 0) { load_addr = simple_strtoul(argv[2], NULL, 16); return 0; } #if defined(CONFIG_CMD_NET) - else if (strcmp(argv[1],"bootfile") == 0) { - copy_filename (BootFile, argv[2], sizeof(BootFile)); + else if (strcmp(argv[1], "bootfile") == 0) { + copy_filename(BootFile, argv[2], sizeof(BootFile)); return 0; } #endif return 0; } -int setenv (char *varname, char *varvalue) +int setenv(char *varname, char *varvalue) { char * const argv[4] = { "setenv", varname, varvalue, NULL }; if ((varvalue == NULL) || (varvalue[0] == '\0')) @@ -343,7 +376,7 @@ int setenv (char *varname, char *varvalue) return _do_env_set(0, 3, argv); } -int do_env_set (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +int do_env_set(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { if (argc < 2) return cmd_usage(cmdtp); @@ -355,7 +388,7 @@ int do_env_set (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) * Prompt for environment variable */ #if defined(CONFIG_CMD_ASKENV) -int do_env_ask ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +int do_env_ask(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { extern char console_buffer[CONFIG_SYS_CBSIZE]; char message[CONFIG_SYS_CBSIZE]; @@ -383,10 +416,10 @@ int do_env_ask ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) break; default: /* env_ask envname message1 ... messagen size */ - for (i=2,pos=0; i < argc - 1; i++) { - if (pos) { + for (i = 2, pos = 0; i < argc - 1; i++) { + if (pos) message[pos++] = ' '; - } + strcpy(message+pos, argv[i]); pos += strlen(argv[i]); } @@ -449,7 +482,7 @@ int do_env_edit(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) * return address of storage for that variable, * or NULL if not found */ -char *getenv (char *name) +char *getenv(char *name) { if (gd->flags & GD_FLG_ENV_READY) { /* after import into hashtable */ ENTRY e, *ep; @@ -460,7 +493,7 @@ char *getenv (char *name) e.data = NULL; hsearch_r(e, FIND, &ep, &env_htab); - return (ep ? ep->data : NULL); + return ep ? ep->data : NULL; } /* restricted capabilities before import */ @@ -474,23 +507,24 @@ char *getenv (char *name) /* * Look up variable from environment for restricted C runtime env. */ -int getenv_f (char *name, char *buf, unsigned len) +int getenv_f(char *name, char *buf, unsigned len) { int i, nxt; - for (i=0; env_get_char(i) != '\0'; i=nxt+1) { + for (i = 0; env_get_char(i) != '\0'; i = nxt+1) { int val, n; - for (nxt=i; env_get_char(nxt) != '\0'; ++nxt) { - if (nxt >= CONFIG_ENV_SIZE) { - return (-1); - } + for (nxt = i; env_get_char(nxt) != '\0'; ++nxt) { + if (nxt >= CONFIG_ENV_SIZE) + return -1; } - if ((val=envmatch((uchar *)name, i)) < 0) + + val = envmatch((uchar *)name, i); + if (val < 0) continue; /* found; copy out */ - for (n=0; n<len; ++n, ++buf) { + for (n = 0; n < len; ++n, ++buf) { if ((*buf = env_get_char(val++)) == '\0') return n; } @@ -502,18 +536,18 @@ int getenv_f (char *name, char *buf, unsigned len) return n; } - return (-1); + return -1; } #if defined(CONFIG_CMD_SAVEENV) && !defined(CONFIG_ENV_IS_NOWHERE) -int do_env_save (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +int do_env_save(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - extern char * env_name_spec; + extern char *env_name_spec; - printf ("Saving Environment to %s...\n", env_name_spec); + printf("Saving Environment to %s...\n", env_name_spec); - return (saveenv() ? 1 : 0); + return saveenv() ? 1 : 0; } U_BOOT_CMD( @@ -533,32 +567,32 @@ U_BOOT_CMD( * If the names match, return the index for the value2, else NULL. */ -int envmatch (uchar *s1, int i2) +int envmatch(uchar *s1, int i2) { - while (*s1 == env_get_char(i2++)) if (*s1++ == '=') - return(i2); + return i2; if (*s1 == '\0' && env_get_char(i2-1) == '=') - return(i2); - return(-1); + return i2; + return -1; } -static int do_env_default(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) +static int do_env_default(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - if ((argc != 2) || (strcmp(argv[1], "-f") != 0)) { + if ((argc != 2) || (strcmp(argv[1], "-f") != 0)) return cmd_usage(cmdtp); - } + set_default_env("## Resetting to default environment\n"); return 0; } -static int do_env_delete(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) +static int do_env_delete(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { printf("Not implemented yet\n"); return 0; } +#ifdef CONFIG_CMD_EXPORTENV /* * env export [-t | -b | -c] addr [size] * -t: export as text format; if size is given, data will be @@ -639,9 +673,8 @@ static int do_env_export(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv } } - if (argc < 1) { + if (argc < 1) return cmd_usage(cmdtp); - } addr = (char *)simple_strtoul(argv[0], NULL, 16); @@ -659,7 +692,7 @@ static int do_env_export(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv errno); return 1; } - sprintf(buf, "%zX", len); + sprintf(buf, "%zX", (size_t)len); setenv("filesize", buf); return 0; @@ -685,7 +718,7 @@ static int do_env_export(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv envp->flags = ACTIVE_FLAG; #endif } - sprintf(buf, "%zX", len + offsetof(env_t,data)); + sprintf(buf, "%zX", (size_t)(len + offsetof(env_t, data))); setenv("filesize", buf); return 0; @@ -695,7 +728,9 @@ sep_err: cmd); return 1; } +#endif +#ifdef CONFIG_CMD_IMPORTENV /* * env import [-d] [-t | -b | -c] addr [size] * -d: delete existing environment before importing; @@ -708,7 +743,7 @@ sep_err: * size: length of input data; if missing, proper '\0' * termination is mandatory */ -static int do_env_import(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) +static int do_env_import(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { char *cmd, *addr; char sep = '\n'; @@ -748,9 +783,8 @@ static int do_env_import(cmd_tbl_t * cmdtp, int flag, int argc, char * const arg } } - if (argc < 1) { + if (argc < 1) return cmd_usage(cmdtp); - } if (!fmt) printf("## Warning: defaulting to text format\n"); @@ -805,9 +839,10 @@ sep_err: cmd); return 1; } +#endif #if defined(CONFIG_CMD_RUN) -extern int do_run (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]); +extern int do_run(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]); #endif /* @@ -822,8 +857,15 @@ static cmd_tbl_t cmd_env_sub[] = { #if defined(CONFIG_CMD_EDITENV) U_BOOT_CMD_MKENT(edit, 2, 0, do_env_edit, "", ""), #endif +#if defined(CONFIG_CMD_EXPORTENV) U_BOOT_CMD_MKENT(export, 4, 0, do_env_export, "", ""), +#endif +#if defined(CONFIG_CMD_GREPENV) + U_BOOT_CMD_MKENT(grep, CONFIG_SYS_MAXARGS, 1, do_env_grep, "", ""), +#endif +#if defined(CONFIG_CMD_IMPORTENV) U_BOOT_CMD_MKENT(import, 5, 0, do_env_import, "", ""), +#endif U_BOOT_CMD_MKENT(print, CONFIG_SYS_MAXARGS, 1, do_env_print, "", ""), #if defined(CONFIG_CMD_RUN) U_BOOT_CMD_MKENT(run, CONFIG_SYS_MAXARGS, 1, do_run, "", ""), @@ -841,7 +883,7 @@ void env_reloc(void) } #endif -static int do_env (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_env(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { cmd_tbl_t *cp; @@ -870,8 +912,11 @@ U_BOOT_CMD( #if defined(CONFIG_CMD_EDITENV) "env edit name - edit environment variable\n" #endif - "env export [-t | -b | -c] addr [size] - export environmnt\n" - "env import [-d] [-t | -b | -c] addr [size] - import environmnt\n" + "env export [-t | -b | -c] addr [size] - export environment\n" +#if defined(CONFIG_CMD_GREPENV) + "env grep string [...] - search environment\n" +#endif + "env import [-d] [-t | -b | -c] addr [size] - import environment\n" "env print [name ...] - print environment\n" #if defined(CONFIG_CMD_RUN) "env run var [...] - run commands in an environment variable\n" @@ -903,6 +948,16 @@ U_BOOT_CMD_COMPLETE( var_complete ); +#ifdef CONFIG_CMD_GREPENV +U_BOOT_CMD_COMPLETE( + grepenv, CONFIG_SYS_MAXARGS, 0, do_env_grep, + "search environment variables", + "string ...\n" + " - list environment name=value pairs matching 'string'", + var_complete +); +#endif + U_BOOT_CMD_COMPLETE( setenv, CONFIG_SYS_MAXARGS, 0, do_env_set, "set environment variables", diff --git a/common/cmd_sf.c b/common/cmd_sf.c index 6e7be81..11a491d 100644 --- a/common/cmd_sf.c +++ b/common/cmd_sf.c @@ -19,6 +19,47 @@ static struct spi_flash *flash; + +/* + * This function computes the length argument for the erase command. + * The length on which the command is to operate can be given in two forms: + * 1. <cmd> offset len - operate on <'offset', 'len') + * 2. <cmd> offset +len - operate on <'offset', 'round_up(len)') + * If the second form is used and the length doesn't fall on the + * sector boundary, than it will be adjusted to the next sector boundary. + * If it isn't in the flash, the function will fail (return -1). + * Input: + * arg: length specification (i.e. both command arguments) + * Output: + * len: computed length for operation + * Return: + * 1: success + * -1: failure (bad format, bad address). + */ +static int sf_parse_len_arg(char *arg, ulong *len) +{ + char *ep; + char round_up_len; /* indicates if the "+length" form used */ + ulong len_arg; + + round_up_len = 0; + if (*arg == '+') { + round_up_len = 1; + ++arg; + } + + len_arg = simple_strtoul(arg, &ep, 16); + if (ep == arg || *ep != '\0') + return -1; + + if (round_up_len && flash->sector_size > 0) + *len = ROUND(len_arg - 1, flash->sector_size); + else + *len = len_arg; + + return 1; +} + static int do_spi_flash_probe(int argc, char * const argv[]) { unsigned int bus = 0; @@ -29,30 +70,30 @@ static int do_spi_flash_probe(int argc, char * const argv[]) struct spi_flash *new; if (argc < 2) - goto usage; + return -1; cs = simple_strtoul(argv[1], &endp, 0); if (*argv[1] == 0 || (*endp != 0 && *endp != ':')) - goto usage; + return -1; if (*endp == ':') { if (endp[1] == 0) - goto usage; + return -1; bus = cs; cs = simple_strtoul(endp + 1, &endp, 0); if (*endp != 0) - goto usage; + return -1; } if (argc >= 3) { speed = simple_strtoul(argv[2], &endp, 0); if (*argv[2] == 0 || *endp != 0) - goto usage; + return -1; } if (argc >= 4) { mode = simple_strtoul(argv[3], &endp, 16); if (*argv[3] == 0 || *endp != 0) - goto usage; + return -1; } new = spi_flash_probe(bus, cs, speed, mode); @@ -65,14 +106,7 @@ static int do_spi_flash_probe(int argc, char * const argv[]) spi_flash_free(flash); flash = new; - printf("%u KiB %s at %u:%u is now current device\n", - flash->size >> 10, flash->name, bus, cs); - return 0; - -usage: - puts("Usage: sf probe [bus:]cs [hz] [mode]\n"); - return 1; } static int do_spi_flash_read_write(int argc, char * const argv[]) @@ -85,17 +119,17 @@ static int do_spi_flash_read_write(int argc, char * const argv[]) int ret; if (argc < 4) - goto usage; + return -1; addr = simple_strtoul(argv[1], &endp, 16); if (*argv[1] == 0 || *endp != 0) - goto usage; + return -1; offset = simple_strtoul(argv[2], &endp, 16); if (*argv[2] == 0 || *endp != 0) - goto usage; + return -1; len = simple_strtoul(argv[3], &endp, 16); if (*argv[3] == 0 || *endp != 0) - goto usage; + return -1; buf = map_physmem(addr, len, MAP_WRBACK); if (!buf) { @@ -116,10 +150,6 @@ static int do_spi_flash_read_write(int argc, char * const argv[]) } return 0; - -usage: - printf("Usage: sf %s addr offset len\n", argv[0]); - return 1; } static int do_spi_flash_erase(int argc, char * const argv[]) @@ -130,14 +160,15 @@ static int do_spi_flash_erase(int argc, char * const argv[]) int ret; if (argc < 3) - goto usage; + return -1; offset = simple_strtoul(argv[1], &endp, 16); if (*argv[1] == 0 || *endp != 0) - goto usage; - len = simple_strtoul(argv[2], &endp, 16); - if (*argv[2] == 0 || *endp != 0) - goto usage; + return -1; + + ret = sf_parse_len_arg(argv[2], &len); + if (ret != 1) + return -1; ret = spi_flash_erase(flash, offset, len); if (ret) { @@ -146,24 +177,25 @@ static int do_spi_flash_erase(int argc, char * const argv[]) } return 0; - -usage: - puts("Usage: sf erase offset len\n"); - return 1; } static int do_spi_flash(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { const char *cmd; + int ret; /* need at least two arguments */ if (argc < 2) goto usage; cmd = argv[1]; + --argc; + ++argv; - if (strcmp(cmd, "probe") == 0) - return do_spi_flash_probe(argc - 1, argv + 1); + if (strcmp(cmd, "probe") == 0) { + ret = do_spi_flash_probe(argc, argv); + goto done; + } /* The remaining commands require a selected device */ if (!flash) { @@ -172,9 +204,15 @@ static int do_spi_flash(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[ } if (strcmp(cmd, "read") == 0 || strcmp(cmd, "write") == 0) - return do_spi_flash_read_write(argc - 1, argv + 1); - if (strcmp(cmd, "erase") == 0) - return do_spi_flash_erase(argc - 1, argv + 1); + ret = do_spi_flash_read_write(argc, argv); + else if (strcmp(cmd, "erase") == 0) + ret = do_spi_flash_erase(argc, argv); + else + ret = -1; + +done: + if (ret != -1) + return ret; usage: return cmd_usage(cmdtp); @@ -189,5 +227,6 @@ U_BOOT_CMD( " `offset' to memory at `addr'\n" "sf write addr offset len - write `len' bytes from memory\n" " at `addr' to flash at `offset'\n" - "sf erase offset len - erase `len' bytes from `offset'" + "sf erase offset [+]len - erase `len' bytes from `offset'\n" + " `+len' round up `len' to block size" ); diff --git a/common/cmd_sha1sum.c b/common/cmd_sha1sum.c new file mode 100644 index 0000000..bb3cff0 --- /dev/null +++ b/common/cmd_sha1sum.c @@ -0,0 +1,53 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <command.h> +#include <sha1.h> + +static int do_sha1sum(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + unsigned long addr, len; + unsigned int i; + u8 output[20]; + + if (argc < 3) + return cmd_usage(cmdtp); + + addr = simple_strtoul(argv[1], NULL, 16); + len = simple_strtoul(argv[2], NULL, 16); + + sha1_csum((unsigned char *) addr, len, output); + printf("SHA1 for %08lx ... %08lx ==> ", addr, addr + len - 1); + for (i = 0; i < 20; i++) + printf("%02x", output[i]); + printf("\n"); + + return 0; +} + +U_BOOT_CMD( + sha1sum, 3, 1, do_sha1sum, + "compute SHA1 message digest", + "address count" +); diff --git a/common/cmd_unzip.c b/common/cmd_unzip.c new file mode 100644 index 0000000..6483b92 --- /dev/null +++ b/common/cmd_unzip.c @@ -0,0 +1,59 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <command.h> + +static int do_unzip(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + unsigned long src, dst; + unsigned long src_len = ~0UL, dst_len = ~0UL; + char buf[32]; + + switch (argc) { + case 4: + dst_len = simple_strtoul(argv[3], NULL, 16); + /* fall through */ + case 3: + src = simple_strtoul(argv[1], NULL, 16); + dst = simple_strtoul(argv[2], NULL, 16); + break; + default: + return cmd_usage(cmdtp); + } + + if (gunzip((void *) dst, dst_len, (void *) src, &src_len) != 0) + return 1; + + printf("Uncompressed size: %ld = 0x%lX\n", src_len, src_len); + sprintf(buf, "%lX", src_len); + setenv("filesize", buf); + + return 0; +} + +U_BOOT_CMD( + unzip, 4, 1, do_unzip, + "unzip a memory region", + "srcaddr dstaddr [dstsize]" +); diff --git a/common/cmd_usb.c b/common/cmd_usb.c index b5731a7..3ba6fff 100644 --- a/common/cmd_usb.c +++ b/common/cmd_usb.c @@ -588,7 +588,7 @@ int do_usb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) break; } if (dev == NULL) { - printf("*** NO Device avaiable ***\n"); + printf("*** No device available ***\n"); return 0; } else { usb_display_desc(dev); diff --git a/common/ddr_spd.c b/common/ddr_spd.c index a7a30de..7a388bb 100644 --- a/common/ddr_spd.c +++ b/common/ddr_spd.c @@ -18,7 +18,7 @@ spd_check(const u8 *buf, u8 spd_rev, u8 spd_cksum) /* * Check SPD revision supported - * Rev 1.2 or less supported by this code + * Rev 1.X or less supported by this code */ if (spd_rev >= 0x20) { printf("SPD revision %02X not supported by this code\n", diff --git a/common/env_mmc.c b/common/env_mmc.c index 71dcc4c..83f40f4 100644 --- a/common/env_mmc.c +++ b/common/env_mmc.c @@ -1,5 +1,5 @@ /* - * (C) Copyright 2008-2010 Freescale Semiconductor, Inc. + * (C) Copyright 2008-2011 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -51,6 +51,19 @@ static void use_default(void); DECLARE_GLOBAL_DATA_PTR; +#if !defined(CONFIG_ENV_OFFSET) +#define CONFIG_ENV_OFFSET 0 +#endif + +static int __mmc_get_env_addr(struct mmc *mmc, u32 *env_addr) +{ + *env_addr = CONFIG_ENV_OFFSET; + return 0; +} +__attribute__((weak, alias("__mmc_get_env_addr"))) +int mmc_get_env_addr(struct mmc *mmc, u32 *env_addr); + + uchar env_get_char_spec(int index) { return *((uchar *)(gd->env_addr + index)); @@ -102,10 +115,14 @@ int saveenv(void) ssize_t len; char *res; struct mmc *mmc = find_mmc_device(CONFIG_SYS_MMC_ENV_DEV); + u32 offset; if (init_mmc_for_env(mmc)) return 1; + if(mmc_get_env_addr(mmc, &offset)) + return 1; + res = (char *)&env_new.data; len = hexport_r(&env_htab, '\0', &res, ENV_SIZE); if (len < 0) { @@ -114,7 +131,7 @@ int saveenv(void) } env_new.crc = crc32(0, env_new.data, ENV_SIZE); printf("Writing to MMC(%d)... ", CONFIG_SYS_MMC_ENV_DEV); - if (write_env(mmc, CONFIG_ENV_SIZE, CONFIG_ENV_OFFSET, (u_char *)&env_new)) { + if (write_env(mmc, CONFIG_ENV_SIZE, offset, (u_char *)&env_new)) { puts("failed\n"); return 1; } @@ -141,16 +158,22 @@ inline int read_env(struct mmc *mmc, unsigned long size, void env_relocate_spec(void) { #if !defined(ENV_IS_EMBEDDED) - char buf[CONFIG_ENV_SIZE]; + char buf[CONFIG_ENV_SIZE]; struct mmc *mmc = find_mmc_device(CONFIG_SYS_MMC_ENV_DEV); + u32 offset; if (init_mmc_for_env(mmc)) { use_default(); return; } - if (read_env(mmc, CONFIG_ENV_SIZE, CONFIG_ENV_OFFSET, buf)) { + if(mmc_get_env_addr(mmc, &offset)) { + use_default(); + return ; + } + + if (read_env(mmc, CONFIG_ENV_SIZE, offset, buf)) { use_default(); return; } diff --git a/common/env_sf.c b/common/env_sf.c index 41cc00a..d3b36d0 100644 --- a/common/env_sf.c +++ b/common/env_sf.c @@ -59,7 +59,6 @@ DECLARE_GLOBAL_DATA_PTR; extern uchar default_environment[]; char * env_name_spec = "SPI Flash"; -env_t *env_ptr; static struct spi_flash *env_flash; @@ -79,7 +78,7 @@ int saveenv(void) char *saved_buffer = NULL; u32 sector = 1; int ret; - char flag = OBSOLETE_FLAG, new_flag = ACTIVE_FLAG; + char flag = OBSOLETE_FLAG; if (!env_flash) { env_flash = spi_flash_probe(CONFIG_ENV_SPI_BUS, @@ -159,7 +158,7 @@ int saveenv(void) gd->env_valid = (gd->env_valid == 2 ? 1 : 2); - printf("Valid environment: %d\n", gd->env_valid); + printf("Valid environment: %d\n", (int)gd->env_valid); done: if (saved_buffer) @@ -174,25 +173,20 @@ void env_relocate_spec(void) env_t *tmp_env1 = NULL; env_t *tmp_env2 = NULL; env_t *ep = NULL; - uchar flag1, flag2; - /* current_env is set only in case both areas are valid! */ - int current_env = 0; tmp_env1 = (env_t *)malloc(CONFIG_ENV_SIZE); tmp_env2 = (env_t *)malloc(CONFIG_ENV_SIZE); if (!tmp_env1 || !tmp_env2) { - free(tmp_env1); - free(tmp_env2); set_default_env("!malloc() failed"); - return; + goto out; } env_flash = spi_flash_probe(CONFIG_ENV_SPI_BUS, CONFIG_ENV_SPI_CS, CONFIG_ENV_SPI_MAX_HZ, CONFIG_ENV_SPI_MODE); if (!env_flash) { set_default_env("!spi_flash_probe() failed"); - return; + goto out; } ret = spi_flash_read(env_flash, CONFIG_ENV_OFFSET, @@ -204,33 +198,30 @@ void env_relocate_spec(void) if (crc32(0, tmp_env1->data, ENV_SIZE) == tmp_env1->crc) crc1_ok = 1; - flag1 = tmp_env1->flags; ret = spi_flash_read(env_flash, CONFIG_ENV_OFFSET_REDUND, CONFIG_ENV_SIZE, tmp_env2); if (!ret) { if (crc32(0, tmp_env2->data, ENV_SIZE) == tmp_env2->crc) crc2_ok = 1; - flag2 = tmp_env2->flags; } if (!crc1_ok && !crc2_ok) { - free(tmp_env1); - free(tmp_env2); set_default_env("!bad CRC"); - return; + goto err_read; } else if (crc1_ok && !crc2_ok) { gd->env_valid = 1; - ep = tmp_env1; } else if (!crc1_ok && crc2_ok) { + gd->env_valid = 2; + } else if (tmp_env1->flags == ACTIVE_FLAG && + tmp_env2->flags == OBSOLETE_FLAG) { gd->env_valid = 1; - } else if (flag1 == ACTIVE_FLAG && flag2 == OBSOLETE_FLAG) { - gd->env_valid = 1; - } else if (flag1 == OBSOLETE_FLAG && flag2 == ACTIVE_FLAG) { + } else if (tmp_env1->flags == OBSOLETE_FLAG && + tmp_env2->flags == ACTIVE_FLAG) { gd->env_valid = 2; - } else if (flag1 == flag2) { + } else if (tmp_env1->flags == tmp_env2->flags) { gd->env_valid = 2; - } else if (flag1 == 0xFF) { + } else if (tmp_env1->flags == 0xFF) { gd->env_valid = 2; } else { /* @@ -240,8 +231,6 @@ void env_relocate_spec(void) gd->env_valid = 2; } - free(env_ptr); - if (gd->env_valid == 1) ep = tmp_env1; else @@ -257,10 +246,6 @@ err_read: spi_flash_free(env_flash); env_flash = NULL; out: - if (tmp_env1) - free(tmp_env1); - if (tmp_env2) - free(tmp_env2); free(tmp_env1); free(tmp_env2); diff --git a/common/exports.c b/common/exports.c index 3dff735..717e4af 100644 --- a/common/exports.c +++ b/common/exports.c @@ -15,7 +15,7 @@ unsigned long get_version(void) /* Reuse _exports.h with a little trickery to avoid bitrot */ #define EXPORT_FUNC(sym) gd->jt[XF_##sym] = (void *)sym; -#if !defined(CONFIG_I386) && !defined(CONFIG_PPC) +#if !defined(CONFIG_X86) && !defined(CONFIG_PPC) # define install_hdlr dummy # define free_hdlr dummy #else /* kludge for non-standard function naming */ diff --git a/common/fdt_support.c b/common/fdt_support.c index 6c98e5b..496040b 100644 --- a/common/fdt_support.c +++ b/common/fdt_support.c @@ -183,7 +183,7 @@ int fdt_initrd(void *fdt, ulong initrd_start, ulong initrd_end, int force) } } - err = fdt_add_mem_rsv(fdt, initrd_start, initrd_end - initrd_start + 1); + err = fdt_add_mem_rsv(fdt, initrd_start, initrd_end - initrd_start); if (err < 0) { printf("fdt_initrd: %s\n", fdt_strerror(err)); return err; @@ -394,7 +394,7 @@ int fdt_fixup_memory_banks(void *blob, u64 start[], u64 size[], int banks) { int err, nodeoffset; int addr_cell_len, size_cell_len, len; - u8 tmp[banks * 8]; + u8 tmp[banks * 16]; /* Up to 64-bit address + 64-bit size */ int bank; err = fdt_check_header(blob); diff --git a/common/image.c b/common/image.c index f63a2ff..e542a57 100644 --- a/common/image.c +++ b/common/image.c @@ -454,6 +454,22 @@ phys_size_t getenv_bootm_size(void) #endif } +phys_size_t getenv_bootm_mapsize(void) +{ + phys_size_t tmp; + char *s = getenv ("bootm_mapsize"); + if (s) { + tmp = (phys_size_t)simple_strtoull (s, NULL, 16); + return tmp; + } + +#if defined(CONFIG_SYS_BOOTMAPSZ) + return CONFIG_SYS_BOOTMAPSZ; +#else + return getenv_bootm_size(); +#endif +} + void memmove_wd (void *to, void *from, size_t len, ulong chunksz) { if (to == from) @@ -1169,10 +1185,37 @@ static int fit_check_fdt (const void *fit, int fdt_noffset, int verify) #define CONFIG_SYS_FDT_PAD 0x3000 #endif +#if defined(CONFIG_OF_LIBFDT) +/** + * boot_fdt_add_mem_rsv_regions - Mark the memreserve sections as unusable + * @lmb: pointer to lmb handle, will be used for memory mgmt + * @fdt_blob: pointer to fdt blob base address + * + * Adds the memreserve regions in the dtb to the lmb block. Adding the + * memreserve regions prevents u-boot from using them to store the initrd + * or the fdt blob. + */ +void boot_fdt_add_mem_rsv_regions(struct lmb *lmb, void *fdt_blob) +{ + uint64_t addr, size; + int i, total; + + if (fdt_check_header (fdt_blob) != 0) + return; + + total = fdt_num_mem_rsv(fdt_blob); + for (i = 0; i < total; i++) { + if (fdt_get_mem_rsv(fdt_blob, i, &addr, &size) != 0) + continue; + printf(" reserving fdt memory region: addr=%llx size=%llx\n", + (unsigned long long)addr, (unsigned long long)size); + lmb_reserve(lmb, addr, size); + } +} + /** * boot_relocate_fdt - relocate flat device tree * @lmb: pointer to lmb handle, will be used for memory mgmt - * @bootmap_base: base address of the bootmap region * @of_flat_tree: pointer to a char* variable, will hold fdt start address * @of_size: pointer to a ulong variable, will hold fdt length * @@ -1187,9 +1230,7 @@ static int fit_check_fdt (const void *fit, int fdt_noffset, int verify) * 0 - success * 1 - failure */ -#if defined(CONFIG_SYS_BOOTMAPSZ) -int boot_relocate_fdt (struct lmb *lmb, ulong bootmap_base, - char **of_flat_tree, ulong *of_size) +int boot_relocate_fdt (struct lmb *lmb, char **of_flat_tree, ulong *of_size) { void *fdt_blob = *of_flat_tree; void *of_start = 0; @@ -1209,7 +1250,7 @@ int boot_relocate_fdt (struct lmb *lmb, ulong bootmap_base, /* Pad the FDT by a specified amount */ of_len = *of_size + CONFIG_SYS_FDT_PAD; of_start = (void *)(unsigned long)lmb_alloc_base(lmb, of_len, 0x1000, - (CONFIG_SYS_BOOTMAPSZ + bootmap_base)); + getenv_bootm_mapsize() + getenv_bootm_low()); if (of_start == 0) { puts("device tree - allocation error\n"); @@ -1238,7 +1279,7 @@ int boot_relocate_fdt (struct lmb *lmb, ulong bootmap_base, error: return 1; } -#endif /* CONFIG_SYS_BOOTMAPSZ */ +#endif /* CONFIG_OF_LIBFDT */ /** * boot_get_fdt - main fdt handling routine @@ -1567,11 +1608,9 @@ error: * @lmb: pointer to lmb handle, will be used for memory mgmt * @cmd_start: pointer to a ulong variable, will hold cmdline start * @cmd_end: pointer to a ulong variable, will hold cmdline end - * @bootmap_base: ulong variable, holds offset in physical memory to - * base of bootmap * * boot_get_cmdline() allocates space for kernel command line below - * BOOTMAPSZ + bootmap_base address. If "bootargs" U-boot environemnt + * BOOTMAPSZ + getenv_bootm_low() address. If "bootargs" U-boot environemnt * variable is present its contents is copied to allocated kernel * command line. * @@ -1579,14 +1618,13 @@ error: * 0 - success * -1 - failure */ -int boot_get_cmdline (struct lmb *lmb, ulong *cmd_start, ulong *cmd_end, - ulong bootmap_base) +int boot_get_cmdline (struct lmb *lmb, ulong *cmd_start, ulong *cmd_end) { char *cmdline; char *s; cmdline = (char *)(ulong)lmb_alloc_base(lmb, CONFIG_SYS_BARGSIZE, 0xf, - CONFIG_SYS_BOOTMAPSZ + bootmap_base); + getenv_bootm_mapsize() + getenv_bootm_low()); if (cmdline == NULL) return -1; @@ -1610,21 +1648,19 @@ int boot_get_cmdline (struct lmb *lmb, ulong *cmd_start, ulong *cmd_end, * boot_get_kbd - allocate and initialize kernel copy of board info * @lmb: pointer to lmb handle, will be used for memory mgmt * @kbd: double pointer to board info data - * @bootmap_base: ulong variable, holds offset in physical memory to - * base of bootmap * * boot_get_kbd() allocates space for kernel copy of board info data below - * BOOTMAPSZ + bootmap_base address and kernel board info is initialized with - * the current u-boot board info data. + * BOOTMAPSZ + getenv_bootm_low() address and kernel board info is initialized + * with the current u-boot board info data. * * returns: * 0 - success * -1 - failure */ -int boot_get_kbd (struct lmb *lmb, bd_t **kbd, ulong bootmap_base) +int boot_get_kbd (struct lmb *lmb, bd_t **kbd) { *kbd = (bd_t *)(ulong)lmb_alloc_base(lmb, sizeof(bd_t), 0xf, - CONFIG_SYS_BOOTMAPSZ + bootmap_base); + getenv_bootm_mapsize() + getenv_bootm_low()); if (*kbd == NULL) return -1; diff --git a/common/miiphyutil.c b/common/miiphyutil.c index e282096..bcab74e 100644 --- a/common/miiphyutil.c +++ b/common/miiphyutil.c @@ -28,6 +28,7 @@ #include <common.h> #include <miiphy.h> +#include <phy.h> #include <asm/types.h> #include <linux/list.h> @@ -39,27 +40,18 @@ #undef debug #ifdef MII_DEBUG -#define debug(fmt,args...) printf (fmt ,##args) +#define debug(fmt, args...) printf(fmt, ##args) #else -#define debug(fmt,args...) +#define debug(fmt, args...) #endif /* MII_DEBUG */ -struct mii_dev { - struct list_head link; - const char *name; - int (*read) (const char *devname, unsigned char addr, - unsigned char reg, unsigned short *value); - int (*write) (const char *devname, unsigned char addr, - unsigned char reg, unsigned short value); -}; - static struct list_head mii_devs; static struct mii_dev *current_mii; /* * Lookup the mii_dev struct by the registered device name. */ -static struct mii_dev *miiphy_get_dev_by_name(const char *devname, int quiet) +struct mii_dev *miiphy_get_dev_by_name(const char *devname) { struct list_head *entry; struct mii_dev *dev; @@ -75,8 +67,6 @@ static struct mii_dev *miiphy_get_dev_by_name(const char *devname, int quiet) return dev; } - if (!quiet) - printf("No such device: %s\n", devname); return NULL; } @@ -86,74 +76,190 @@ static struct mii_dev *miiphy_get_dev_by_name(const char *devname, int quiet) */ void miiphy_init(void) { - INIT_LIST_HEAD (&mii_devs); + INIT_LIST_HEAD(&mii_devs); current_mii = NULL; } +static int legacy_miiphy_read(struct mii_dev *bus, int addr, int devad, int reg) +{ + unsigned short val; + int ret; + struct legacy_mii_dev *ldev = bus->priv; + + ret = ldev->read(bus->name, addr, reg, &val); + + return ret ? -1 : (int)val; +} + +static int legacy_miiphy_write(struct mii_dev *bus, int addr, int devad, + int reg, u16 val) +{ + struct legacy_mii_dev *ldev = bus->priv; + + return ldev->write(bus->name, addr, reg, val); +} + /***************************************************************************** * * Register read and write MII access routines for the device <name>. */ void miiphy_register(const char *name, - int (*read) (const char *devname, unsigned char addr, + int (*read)(const char *devname, unsigned char addr, unsigned char reg, unsigned short *value), - int (*write) (const char *devname, unsigned char addr, + int (*write)(const char *devname, unsigned char addr, unsigned char reg, unsigned short value)) { struct mii_dev *new_dev; + struct legacy_mii_dev *ldev; unsigned int name_len; - char *new_name; /* check if we have unique name */ - new_dev = miiphy_get_dev_by_name(name, 1); + new_dev = miiphy_get_dev_by_name(name); if (new_dev) { printf("miiphy_register: non unique device name '%s'\n", name); return; } /* allocate memory */ - name_len = strlen (name); - new_dev = - (struct mii_dev *)malloc (sizeof (struct mii_dev) + name_len + 1); + name_len = strlen(name); + if (name_len > MDIO_NAME_LEN - 1) { + /* Hopefully this won't happen, but if it does, we'll know */ + printf("miiphy_register: MDIO name was longer than %d\n", + MDIO_NAME_LEN); + return; + } + + new_dev = mdio_alloc(); + ldev = malloc(sizeof(*ldev)); - if (new_dev == NULL) { - printf ("miiphy_register: cannot allocate memory for '%s'\n", + if (new_dev == NULL || ldev == NULL) { + printf("miiphy_register: cannot allocate memory for '%s'\n", name); return; } - memset (new_dev, 0, sizeof (struct mii_dev) + name_len); /* initalize mii_dev struct fields */ - INIT_LIST_HEAD (&new_dev->link); - new_dev->read = read; - new_dev->write = write; - new_dev->name = new_name = (char *)(new_dev + 1); - strncpy (new_name, name, name_len); - new_name[name_len] = '\0'; + new_dev->read = legacy_miiphy_read; + new_dev->write = legacy_miiphy_write; + sprintf(new_dev->name, name); + ldev->read = read; + ldev->write = write; + new_dev->priv = ldev; - debug ("miiphy_register: added '%s', read=0x%08lx, write=0x%08lx\n", - new_dev->name, new_dev->read, new_dev->write); + debug("miiphy_register: added '%s', read=0x%08lx, write=0x%08lx\n", + new_dev->name, ldev->read, ldev->write); /* add it to the list */ - list_add_tail (&new_dev->link, &mii_devs); + list_add_tail(&new_dev->link, &mii_devs); if (!current_mii) current_mii = new_dev; } +struct mii_dev *mdio_alloc(void) +{ + struct mii_dev *bus; + + bus = malloc(sizeof(*bus)); + if (!bus) + return bus; + + memset(bus, 0, sizeof(*bus)); + + /* initalize mii_dev struct fields */ + INIT_LIST_HEAD(&bus->link); + + return bus; +} + +int mdio_register(struct mii_dev *bus) +{ + if (!bus || !bus->name || !bus->read || !bus->write) + return -1; + + /* check if we have unique name */ + if (miiphy_get_dev_by_name(bus->name)) { + printf("mdio_register: non unique device name '%s'\n", + bus->name); + return -1; + } + + /* add it to the list */ + list_add_tail(&bus->link, &mii_devs); + + if (!current_mii) + current_mii = bus; + + return 0; +} + +void mdio_list_devices(void) +{ + struct list_head *entry; + + list_for_each(entry, &mii_devs) { + int i; + struct mii_dev *bus = list_entry(entry, struct mii_dev, link); + + printf("%s:\n", bus->name); + + for (i = 0; i < PHY_MAX_ADDR; i++) { + struct phy_device *phydev = bus->phymap[i]; + + if (phydev) { + printf("%d - %s", i, phydev->drv->name); + + if (phydev->dev) + printf(" <--> %s\n", phydev->dev->name); + else + printf("\n"); + } + } + } +} + int miiphy_set_current_dev(const char *devname) { struct mii_dev *dev; - dev = miiphy_get_dev_by_name(devname, 0); + dev = miiphy_get_dev_by_name(devname); if (dev) { current_mii = dev; return 0; } + printf("No such device: %s\n", devname); + return 1; } +struct mii_dev *mdio_get_current_dev(void) +{ + return current_mii; +} + +struct phy_device *mdio_phydev_for_ethname(const char *ethname) +{ + struct list_head *entry; + struct mii_dev *bus; + + list_for_each(entry, &mii_devs) { + int i; + bus = list_entry(entry, struct mii_dev, link); + + for (i = 0; i < PHY_MAX_ADDR; i++) { + if (!bus->phymap[i] || !bus->phymap[i]->dev) + continue; + + if (strcmp(bus->phymap[i]->dev->name, ethname) == 0) + return bus->phymap[i]; + } + } + + printf("%s is not a known ethernet\n", ethname); + return NULL; +} + const char *miiphy_get_current_dev(void) { if (current_mii) @@ -187,13 +293,19 @@ static struct mii_dev *miiphy_get_active_dev(const char *devname) int miiphy_read(const char *devname, unsigned char addr, unsigned char reg, unsigned short *value) { - struct mii_dev *dev; + struct mii_dev *bus; + int ret; - dev = miiphy_get_active_dev(devname); - if (dev) - return dev->read(devname, addr, reg, value); + bus = miiphy_get_active_dev(devname); + if (!bus) + return 1; - return 1; + ret = bus->read(bus, addr, MDIO_DEVAD_NONE, reg); + if (ret < 0) + return 1; + + *value = (unsigned short)ret; + return 0; } /***************************************************************************** @@ -207,11 +319,11 @@ int miiphy_read(const char *devname, unsigned char addr, unsigned char reg, int miiphy_write(const char *devname, unsigned char addr, unsigned char reg, unsigned short value) { - struct mii_dev *dev; + struct mii_dev *bus; - dev = miiphy_get_active_dev(devname); - if (dev) - return dev->write(devname, addr, reg, value); + bus = miiphy_get_active_dev(devname); + if (bus) + return bus->write(bus, addr, MDIO_DEVAD_NONE, reg, value); return 1; } @@ -220,20 +332,20 @@ int miiphy_write(const char *devname, unsigned char addr, unsigned char reg, * * Print out list of registered MII capable devices. */ -void miiphy_listdev (void) +void miiphy_listdev(void) { struct list_head *entry; struct mii_dev *dev; - puts ("MII devices: "); - list_for_each (entry, &mii_devs) { - dev = list_entry (entry, struct mii_dev, link); - printf ("'%s' ", dev->name); + puts("MII devices: "); + list_for_each(entry, &mii_devs) { + dev = list_entry(entry, struct mii_dev, link); + printf("'%s' ", dev->name); } - puts ("\n"); + puts("\n"); if (current_mii) - printf ("Current device: '%s'\n", current_mii->name); + printf("Current device: '%s'\n", current_mii->name); } /***************************************************************************** @@ -253,32 +365,33 @@ int miiphy_info(const char *devname, unsigned char addr, unsigned int *oui, unsigned int reg = 0; unsigned short tmp; - if (miiphy_read (devname, addr, MII_PHYSID2, &tmp) != 0) { - debug ("PHY ID register 2 read failed\n"); - return (-1); + if (miiphy_read(devname, addr, MII_PHYSID2, &tmp) != 0) { + debug("PHY ID register 2 read failed\n"); + return -1; } reg = tmp; - debug ("MII_PHYSID2 @ 0x%x = 0x%04x\n", addr, reg); + debug("MII_PHYSID2 @ 0x%x = 0x%04x\n", addr, reg); if (reg == 0xFFFF) { /* No physical device present at this address */ - return (-1); + return -1; } - if (miiphy_read (devname, addr, MII_PHYSID1, &tmp) != 0) { - debug ("PHY ID register 1 read failed\n"); - return (-1); + if (miiphy_read(devname, addr, MII_PHYSID1, &tmp) != 0) { + debug("PHY ID register 1 read failed\n"); + return -1; } reg |= tmp << 16; - debug ("PHY_PHYIDR[1,2] @ 0x%x = 0x%08x\n", addr, reg); + debug("PHY_PHYIDR[1,2] @ 0x%x = 0x%08x\n", addr, reg); *oui = (reg >> 10); *model = (unsigned char)((reg >> 4) & 0x0000003F); *rev = (unsigned char)(reg & 0x0000000F); - return (0); + return 0; } +#ifndef CONFIG_PHYLIB /***************************************************************************** * * Reset the PHY. @@ -290,16 +403,16 @@ int miiphy_reset(const char *devname, unsigned char addr) unsigned short reg; int timeout = 500; - if (miiphy_read (devname, addr, MII_BMCR, ®) != 0) { - debug ("PHY status read failed\n"); - return (-1); + if (miiphy_read(devname, addr, MII_BMCR, ®) != 0) { + debug("PHY status read failed\n"); + return -1; } - if (miiphy_write (devname, addr, MII_BMCR, reg | BMCR_RESET) != 0) { - debug ("PHY reset failed\n"); - return (-1); + if (miiphy_write(devname, addr, MII_BMCR, reg | BMCR_RESET) != 0) { + debug("PHY reset failed\n"); + return -1; } #ifdef CONFIG_PHY_RESET_DELAY - udelay (CONFIG_PHY_RESET_DELAY); /* Intel LXT971A needs this */ + udelay(CONFIG_PHY_RESET_DELAY); /* Intel LXT971A needs this */ #endif /* * Poll the control register for the reset bit to go to 0 (it is @@ -315,13 +428,14 @@ int miiphy_reset(const char *devname, unsigned char addr) udelay(1000); } if ((reg & 0x8000) == 0) { - return (0); + return 0; } else { - puts ("PHY reset timed out\n"); - return (-1); + puts("PHY reset timed out\n"); + return -1; } - return (0); + return 0; } +#endif /* !PHYLIB */ /***************************************************************************** * @@ -338,33 +452,32 @@ int miiphy_speed(const char *devname, unsigned char addr) * Check for 1000BASE-X. If it is supported, then assume that the speed * is 1000. */ - if (miiphy_is_1000base_x (devname, addr)) { + if (miiphy_is_1000base_x(devname, addr)) return _1000BASET; - } + /* * No 1000BASE-X, so assume 1000BASE-T/100BASE-TX/10BASE-T register set. */ /* Check for 1000BASE-T. */ - if (miiphy_read (devname, addr, MII_STAT1000, &btsr)) { - printf ("PHY 1000BT status"); + if (miiphy_read(devname, addr, MII_STAT1000, &btsr)) { + printf("PHY 1000BT status"); goto miiphy_read_failed; } if (btsr != 0xFFFF && - (btsr & (PHY_1000BTSR_1000FD | PHY_1000BTSR_1000HD))) { + (btsr & (PHY_1000BTSR_1000FD | PHY_1000BTSR_1000HD))) return _1000BASET; - } #endif /* CONFIG_PHY_GIGE */ /* Check Basic Management Control Register first. */ - if (miiphy_read (devname, addr, MII_BMCR, &bmcr)) { - printf ("PHY speed"); + if (miiphy_read(devname, addr, MII_BMCR, &bmcr)) { + printf("PHY speed"); goto miiphy_read_failed; } /* Check if auto-negotiation is on. */ if (bmcr & BMCR_ANENABLE) { /* Get auto-negotiation results. */ - if (miiphy_read (devname, addr, MII_LPA, &anlpar)) { - printf ("PHY AN speed"); + if (miiphy_read(devname, addr, MII_LPA, &anlpar)) { + printf("PHY AN speed"); goto miiphy_read_failed; } return (anlpar & LPA_100) ? _100BASET : _10BASET; @@ -373,7 +486,7 @@ int miiphy_speed(const char *devname, unsigned char addr) return (bmcr & BMCR_SPEED100) ? _100BASET : _10BASET; miiphy_read_failed: - printf (" read failed, assuming 10BASE-T\n"); + printf(" read failed, assuming 10BASE-T\n"); return _10BASET; } @@ -389,10 +502,10 @@ int miiphy_duplex(const char *devname, unsigned char addr) u16 btsr; /* Check for 1000BASE-X. */ - if (miiphy_is_1000base_x (devname, addr)) { + if (miiphy_is_1000base_x(devname, addr)) { /* 1000BASE-X */ - if (miiphy_read (devname, addr, MII_LPA, &anlpar)) { - printf ("1000BASE-X PHY AN duplex"); + if (miiphy_read(devname, addr, MII_LPA, &anlpar)) { + printf("1000BASE-X PHY AN duplex"); goto miiphy_read_failed; } } @@ -400,8 +513,8 @@ int miiphy_duplex(const char *devname, unsigned char addr) * No 1000BASE-X, so assume 1000BASE-T/100BASE-TX/10BASE-T register set. */ /* Check for 1000BASE-T. */ - if (miiphy_read (devname, addr, MII_STAT1000, &btsr)) { - printf ("PHY 1000BT status"); + if (miiphy_read(devname, addr, MII_STAT1000, &btsr)) { + printf("PHY 1000BT status"); goto miiphy_read_failed; } if (btsr != 0xFFFF) { @@ -414,15 +527,15 @@ int miiphy_duplex(const char *devname, unsigned char addr) #endif /* CONFIG_PHY_GIGE */ /* Check Basic Management Control Register first. */ - if (miiphy_read (devname, addr, MII_BMCR, &bmcr)) { - puts ("PHY duplex"); + if (miiphy_read(devname, addr, MII_BMCR, &bmcr)) { + puts("PHY duplex"); goto miiphy_read_failed; } /* Check if auto-negotiation is on. */ if (bmcr & BMCR_ANENABLE) { /* Get auto-negotiation results. */ - if (miiphy_read (devname, addr, MII_LPA, &anlpar)) { - puts ("PHY AN duplex"); + if (miiphy_read(devname, addr, MII_LPA, &anlpar)) { + puts("PHY AN duplex"); goto miiphy_read_failed; } return (anlpar & (LPA_10FULL | LPA_100FULL)) ? @@ -432,7 +545,7 @@ int miiphy_duplex(const char *devname, unsigned char addr) return (bmcr & BMCR_FULLDPLX) ? FULL : HALF; miiphy_read_failed: - printf (" read failed, assuming half duplex\n"); + printf(" read failed, assuming half duplex\n"); return HALF; } @@ -446,8 +559,8 @@ int miiphy_is_1000base_x(const char *devname, unsigned char addr) #if defined(CONFIG_PHY_GIGE) u16 exsr; - if (miiphy_read (devname, addr, MII_ESTATUS, &exsr)) { - printf ("PHY extended status read failed, assuming no " + if (miiphy_read(devname, addr, MII_ESTATUS, &exsr)) { + printf("PHY extended status read failed, assuming no " "1000BASE-X\n"); return 0; } @@ -467,17 +580,17 @@ int miiphy_link(const char *devname, unsigned char addr) unsigned short reg; /* dummy read; needed to latch some phys */ - (void)miiphy_read (devname, addr, MII_BMSR, ®); - if (miiphy_read (devname, addr, MII_BMSR, ®)) { - puts ("MII_BMSR read failed, assuming no link\n"); - return (0); + (void)miiphy_read(devname, addr, MII_BMSR, ®); + if (miiphy_read(devname, addr, MII_BMSR, ®)) { + puts("MII_BMSR read failed, assuming no link\n"); + return 0; } /* Determine if a link is active */ if ((reg & BMSR_LSTATUS) != 0) { - return (1); + return 1; } else { - return (0); + return 0; } } #endif diff --git a/common/usb_storage.c b/common/usb_storage.c index 1e6cd6a..9ecf165 100644 --- a/common/usb_storage.c +++ b/common/usb_storage.c @@ -254,7 +254,7 @@ int usb_stor_scan(int mode) dev = usb_get_dev_index(i); /* get device */ USB_STOR_PRINTF("i=%d\n", i); if (dev == NULL) - break; /* no more devices avaiable */ + break; /* no more devices available */ if (usb_storage_probe(dev, 0, &usb_stor[usb_max_devs])) { /* OK, it's a storage device. Iterate over its LUNs @@ -1346,31 +1346,6 @@ int usb_stor_get_info(struct usb_device *dev, struct us_data *ss, unsigned long *capacity, *blksz; ccb *pccb = &usb_ccb; - /* for some reasons a couple of devices would not survive this reset */ - if ( - /* Sony USM256E */ - (dev->descriptor.idVendor == 0x054c && - dev->descriptor.idProduct == 0x019e) - || - /* USB007 Mini-USB2 Flash Drive */ - (dev->descriptor.idVendor == 0x066f && - dev->descriptor.idProduct == 0x2010) - || - /* SanDisk Corporation Cruzer Micro 20044318410546613953 */ - (dev->descriptor.idVendor == 0x0781 && - dev->descriptor.idProduct == 0x5151) - || - /* - * SanDisk Corporation U3 Cruzer Micro 1/4GB - * Flash Drive 000016244373FFB4 - */ - (dev->descriptor.idVendor == 0x0781 && - dev->descriptor.idProduct == 0x5406) - ) - USB_STOR_PRINTF("usb_stor_get_info: skipping RESET..\n"); - else - ss->transport_reset(ss); - pccb->pdata = usb_stor_buf; dev_desc->target = dev->devnum; @@ -153,14 +153,37 @@ endif RELFLAGS= $(PLATFORM_RELFLAGS) DBGFLAGS= -g # -DDEBUG OPTFLAGS= -Os #-fomit-frame-pointer + +# If board code explicitly specified LDSCRIPT or CONFIG_SYS_LDSCRIPT, use +# that (or fail if absent). Otherwise, search for a linker script in a +# standard location. + ifndef LDSCRIPT -#LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot.lds.debug -ifeq ($(CONFIG_NAND_U_BOOT),y) -LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot-nand.lds -else -LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot.lds + #LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot.lds.debug + ifdef CONFIG_SYS_LDSCRIPT + # need to strip off double quotes + LDSCRIPT := $(subst ",,$(CONFIG_SYS_LDSCRIPT)) + endif endif + +ifndef LDSCRIPT + ifeq ($(CONFIG_NAND_U_BOOT),y) + LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot-nand.lds + ifeq ($(wildcard $(LDSCRIPT)),) + LDSCRIPT := $(TOPDIR)/$(CPUDIR)/u-boot-nand.lds + endif + endif + ifeq ($(wildcard $(LDSCRIPT)),) + LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot.lds + endif + ifeq ($(wildcard $(LDSCRIPT)),) + LDSCRIPT := $(TOPDIR)/$(CPUDIR)/u-boot.lds + endif + ifeq ($(wildcard $(LDSCRIPT)),) +$(error could not find linker script) + endif endif + OBJCFLAGS += --gap-fill=0xff gccincdir := $(shell $(CC) -print-file-name=include) diff --git a/disk/part.c b/disk/part.c index 13723f2..f07a17f 100644 --- a/disk/part.c +++ b/disk/part.c @@ -84,7 +84,7 @@ block_dev_desc_t *get_dev(char* ifname, int dev) #ifdef CONFIG_NEEDS_MANUAL_RELOC name += gd->reloc_off; #endif - while (name) { + while (drvr->name) { name = drvr->name; reloc_get_dev = drvr->get_dev; #ifdef CONFIG_NEEDS_MANUAL_RELOC diff --git a/doc/README-i386 b/doc/README-i386 deleted file mode 100644 index c560d22..0000000 --- a/doc/README-i386 +++ /dev/null @@ -1,74 +0,0 @@ -This is my attempt to port U-Boot to the i386 platform. This -work was sponsored by my emplyer, Omicron Ceti AB. http://www.omicron.se - -It is currently capable of booting a linux bzImage from flash on -the AMD SC520 CDP platform. - -It was originally based on PPCBoot taken from the CVS October 28 2002. - -To compile: - -1) Unpack the source tree, either from the complete tarball or - from the virgin snapshot + the patch - -2) Configure the source - $ make sc520_cdp_comfig - $ make - -To use this code on the CDP: -1) Make a suitable kernel, I used 2.4.19 with the mtd-support updated - from the MTD CVS and a patch to allow root=/dev/mtdblock1 which I - included at the end of this file. - The following options in the MTD section might be useful: - - CONFIG_MTD_PHYSMAP=y - CONFIG_MTD_PHYSMAP_START=38100000 - CONFIG_MTD_PHYSMAP_LEN=7a0000 - CONFIG_MTD_PHYSMAP_BUSWIDTH=2 - - -2) Program it in to the CDP flashbank with remon - u-boot.bin should be programmed att offset 0x7e000 and the kernel at - offset 0. If you want to use a jffs2 root file system (not included here), - it should be programmed to offset 0x100000. - - remon> z - remon> yi - remon> ns u-boot.bin 7e0000 - remon> ns bzImage 0 - remon> ns image.jffs2 100000 - -3) Connect a terminal to the 25pin serial port at 9600bps, and start the CDP. - - remon> z - remon> g - -4) U-Boot should output some message and a prompt on the terminal, to - start the kernel issue the following command: - - BOOT> bootm - -5) The kernel should boot, and mount the root filesystem if present. - -We hope you find this stuff useful -Daniel Engström, Omicron Ceti AB, daniel@omicron.se - - ---- linux-2.4.19-orig/init/do_mounts.c Sat Aug 3 02:39:46 2002 -+++ linux-2.4.19/init/do_mounts.c Mon Sep 23 16:21:33 2002 -@@ -224,6 +224,14 @@ - { "ftlc", 0x2c10 }, - { "ftld", 0x2c18 }, - { "mtdblock", 0x1f00 }, -+ { "mtdblock0", 0x1f00 }, -+ { "mtdblock1", 0x1f01 }, -+ { "mtdblock2", 0x1f02 }, -+ { "mtdblock3", 0x1f03 }, -+ { "mtdblock4", 0x1f04 }, -+ { "mtdblock5", 0x1f05 }, -+ { "mtdblock6", 0x1f06 }, -+ { "mtdblock7", 0x1f07 }, - { NULL, 0 } - }; - -------------------- diff --git a/doc/README.Purple b/doc/README.Purple deleted file mode 100644 index 0098e26..0000000 --- a/doc/README.Purple +++ /dev/null @@ -1,84 +0,0 @@ -Installation Instructions: --------------------------- - -1. Put the s2 switch into the following position: - - Off On - ------ - |x | - | x| - |x | - | X| - ------ - - Put the s3 switch into the following position: - - Off On - ------ - | x | - | x | - | x| - | x| - ------ - - Put the s4 switch into the following position: - - Off On - ------ - |x | - |x | - |x | - |x | - |x | - | x| - | x| - |x | - ------ - -2. Connect to the serial console and to the BDI. Power on. On the - serial line, you should see: - - PURPLE@1.2> - -3. Type '8'. No echo will be displayed. In response, you should get: - - 7A(pass) - -4. From BDI, enter command: - - mmw 0xb800d860 0x0042c7ff - -5. Then, from BDI: - - erase 0xB0000000 - erase 0xB0008000 - erase 0xB000C000 - erase 0xB0010000 - erase 0xB0020000 - - prog 0xB0000000 <u-boot.bin> bin - -6. Power off. Restore the original S2 switch position: - - Off On - ------ - | x| - | x| - |x | - | X| - ------ - - Power on. U-Boot should come up. - - -Implementation Notes: ---------------------- - -Due to the RAM/flash bus arbitration problem the suggested workaround -had to be implemented. It works okay. On the downside is that you -can't really check whether 'erase' is complete by polling flash as it -is usually done. Instead, the flash driver simply waits for a given -time and assumes that erase then has passed. This behaviour is -identical to what the VxWorks driver does; also, the same timeout (6 -seconds) was chosen. Note that this timeout applies for each erase -operation, i. e. per erased sector. diff --git a/doc/README.dnp5370 b/doc/README.dnp5370 new file mode 100644 index 0000000..0172698 --- /dev/null +++ b/doc/README.dnp5370 @@ -0,0 +1,67 @@ +This document describes the board support for +Dil/NetPC DNP/5370 (http://www.dilnetpc.com/dnp0086.htm) module. +The distributor is SSV (http://www.ssv-embedded.de), + +The module used to develop the support files contains: + +* Processor: Blackfin BF537 Rev 0.3 (600 MHz core / 120MHz RAM) + +* RAM: 32 MB SDRAM + Hynix HY57V561620FTP-H 810EA + Connected to Blackfin via "Expansion Bus" + Address range 0x0000.0000 - 0x1fff.ffff + +* NOR flash: 32 MBit (4 MByte) + Exel Semiconductor ES29LVS320EB + Connected to Blackfin via "Expansion Bus", + Chip Selects 0, 1 and 2, each is connected + to a 1 MB memory bank at Blackfin, therefore + only 3 MB accessible. + Address range 0x2000.0000 - 0x202f.ffff + CFI compatible + + Exel Semiconductor was bought by Rohm Semiconductor (www.rohm.com). + +* NAND flash: 64 MBit (8 MByte) + Atmel 45DB642D-CNU + Connected to Blackfin via SPI + CFI compatible + +* Davicom DM9161EP Ethernet PHY + +* A SD card reader, connected via SPI + +* Hardware watchdog MAX823 or TPS3823 + +(other devices not listed here) + +To run it, the module must be inserted in a 64 pin DIL socket +on another board, e.g. DNP/EVA13 (together: SSV SK28). + +The Blackfin is booted from NOR flash. The NOR flash data begins +with the U-Boot code and is then followed by the Linux code. +Finally, the MAC is stored in the last sector. +You may need to adjust these settings to your needs. +The memory map used to develop the board support is: + +Memory map: +0x00000000 .. 0x01ffffff SDRAM +0x20000000 .. 0x202fffff NOR flash + +RAM use: +0x01f9bffc .. 0x01fbbffb U-Boot stack +0x01f9c000 .. 0x01f9ffff U-Boot global data +0x01fa0000 .. 0x01fbffff U-Boot malloc() RAM +0x01fc0000 .. 0x01ffffff U-Boot execution RAM + +NOR flash use: +0x20000000 .. 0x0002ffff U-Boot +0x20004000 .. 0x20005fff U-Boot environment +0x20030000 .. 0x202effff Linux kernel image +0x202f0000 .. 0x202fffff MAC address sector + +NOR flash is 0x00300000 (3145728) bytes large (3 MB). +Max space for compressed kernel in flash is 0x002c0000 (2883584) bytes (2.75 MB) +Max space for u-boot in flash is 0x00030000 (196608) bytes (192 KB) + +The module is hardwired to BYPASS boot mode. diff --git a/doc/README.p1022ds b/doc/README.p1022ds new file mode 100644 index 0000000..473ecf6 --- /dev/null +++ b/doc/README.p1022ds @@ -0,0 +1,24 @@ +Overview +-------- +P1022ds is a Low End Dual core platform supporting the P1022 processor +of QorIQ series. P1022 is an e500 based dual core SOC. + + +Pin Multiplex(hwconfig setting) +------------------------------- +Add the environment 'usb2', 'audclk' and 'tdm' to support pin multiplex +via hwconfig, i.e: +'setenv hwconfig usb2' to enable USB2 and disable eTsec2 +'setenv hwconfig tdm' to enable TDM and disable Audio +'setenv hwconfig audclk:12' to enable Audio(codec clock sources is 12MHz) + and disable TDM +'setenv hwconfig 'usb2;tdm' to enable USB2 and TDM, disable eTsec2 and Audio +'setenv hwconfig 'usb2;audclk:11' to enable USB2 and Audio(codec clock sources + is 11MHz), disable eTsec2 and TDM + +Warning: TDM and AUDIO can not enable simultaneous ! +and AUDIO codec clock sources only setting as 11MHz or 12MHz ! +'setenv hwconfig 'audclk:12;tdm' --- error ! +'setenv hwconfig 'audclk:11;tdm' --- error ! +'setenv hwconfig 'audclk:10' --- error ! + diff --git a/doc/README.p4080ds b/doc/README.p4080ds new file mode 100644 index 0000000..3ed59a8 --- /dev/null +++ b/doc/README.p4080ds @@ -0,0 +1,32 @@ +Overview +-------- +The P4080DS is a Freescale reference board that hosts the eight-core P4080 SOC. + +SerDes hwconfig configuration +----------------------------- +The P4080 RCW includes three sets of bits the specify which SerDes lanes +should be powered down: SRDS_LPD_B1 (for bank one), SRDS_LPD_B2 (for bank two), +and SRDS_LPD_B3 (for bank three). Each of these contains four bits, one for +each lane in the bank. SerDes Erratum SERDES8 requires that SRDS_LPD_B2 and +SRDS_LPD_B3 be set to 0b1111. This forces banks two and three to be powered +down at reset. + +To re-enable these banks in U-Boot, two hwconfig are available: +"fsl_srds_lpd_b2" and "fsl_srds_lpd_b3". The value passed via fsl_srds_lpd_b2 +is written into SRDS_LPD_B2, and the value passed via fsl_srds_lpd_b3 is into +SRDS_LPD_B3. Each bit represents one of each bank, and a value of '1' +indicates that the lane should be powered down. + +For example, to indicate that both SerDes banks 2 and 3 are powered down, add +the following to hwconfig: + + serdes:fsl_srds_lpd_b2=0xf,fsl_srds_lpd_b3=0xf + +The "0xf" is a mask that corresponds to the 4 lanes A-D. The most significant +bit corresponds to lane A. To indicate that just lane A of bank 3 is to be +powered down, use: + + serdes:fsl_srds_lpd_b3=8 + +These options should be specified only if U-Boot does not automatically power +on the correct lanes. diff --git a/doc/README.video b/doc/README.video index 34e199c..0c04bea 100644 --- a/doc/README.video +++ b/doc/README.video @@ -28,3 +28,22 @@ The driver has been tested with the following configurations: - MPC823FADS with AD7176 on a PAL TV (YCbYCr) - arsenio@tin.it - GENIETV with AD7177 on a PAL TV (YCbYCr) - arsenio@tin.it + + +"video-mode" environment variable +=============================== + +The 'video-mode' environment variable can be used to enable and configure +some video drivers. The format matches the video= command-line option used +for Linux: + + video-mode=<driver>:<xres>x<yres>-<depth>@<freq><,option=string> + + <driver> The video driver name, ignored by U-Boot + <xres> The X resolution (in pixels) to use. + <yres> The Y resolution (in pixels) to use. + <depth> The color depth (in bits) to use. + <freq> The frequency (in Hz) to use. + <options> A comma-separated list of device-specific options + +Example: video-mode=fslfb:1280x1024-32@60,monitor=dvi diff --git a/doc/TODO-i386 b/doc/TODO-i386 deleted file mode 100644 index 9b6c5d4..0000000 --- a/doc/TODO-i386 +++ /dev/null @@ -1,29 +0,0 @@ -i386 port missing features: -* i386 cleaness (wbinvld is 486+ ... ) -* Pentium TSC timer/udelay -* setup the BIOS data area and BIOS equipment word to reflect machine config. -* Make reset work (from Linux and from the boot prompt) -* DMA, FDC, RTC, KBC initialization -* split of part of arch/i386/cpu/interrupt.c to cpu/i385/entry.c? -* re-entry of protected mode from real mode, should be added to realmode_switch.S - (and used by INT 10h and INT 16h handlers for console I/O during early - linux boot...) -* missing functions in arch/i386/lib and arch/i386/cpu -* speaker beep interface - - -SC520 missing features: -* Watchdog -* SC520 timer/udelay -* SC520 3rd PIC -* SC520 ICE serial -* SC520 MMCR reset - -SC520 CDP board support missing features: -* environment in sram - -SC520 CDP board support bugs: -* SPI EEPROM support does not work -* 0x680 LEDS dos not work for me -* is it possible to make both the internal serial ports and the - ports on the sio work at the same time? diff --git a/drivers/block/mvsata_ide.c b/drivers/block/mvsata_ide.c index 3d6993a..e0e4097 100644 --- a/drivers/block/mvsata_ide.c +++ b/drivers/block/mvsata_ide.c @@ -1,7 +1,7 @@ /* - * Copyright (C) 2010 Albert ARIBAUD <albert.aribaud@free.fr> + * Copyright (C) 2010 Albert ARIBAUD <albert.u.boot@aribaud.net> * - * Written-by: Albert ARIBAUD <albert.aribaud@free.fr> + * Written-by: Albert ARIBAUD <albert.u.boot@aribaud.net> * * See file CREDITS for list of people who contributed to this * project. diff --git a/drivers/gpio/mxc_gpio.c b/drivers/gpio/mxc_gpio.c index 53a0673..1037862 100644 --- a/drivers/gpio/mxc_gpio.c +++ b/drivers/gpio/mxc_gpio.c @@ -21,12 +21,7 @@ * MA 02111-1307 USA */ #include <common.h> -#ifdef CONFIG_MX31 -#include <asm/arch/mx31-regs.h> -#endif -#if defined(CONFIG_MX51) || defined(CONFIG_MX53) #include <asm/arch/imx-regs.h> -#endif #include <asm/io.h> #include <mxc_gpio.h> diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile index 052fe36..00a12cc 100644 --- a/drivers/i2c/Makefile +++ b/drivers/i2c/Makefile @@ -29,6 +29,7 @@ COBJS-$(CONFIG_BFIN_TWI_I2C) += bfin-twi_i2c.o COBJS-$(CONFIG_DRIVER_DAVINCI_I2C) += davinci_i2c.o COBJS-$(CONFIG_FSL_I2C) += fsl_i2c.o COBJS-$(CONFIG_I2C_MVTWSI) += mvtwsi.o +COBJS-$(CONFIG_I2C_MV) += mv_i2c.o COBJS-$(CONFIG_I2C_MXC) += mxc_i2c.o COBJS-$(CONFIG_DRIVER_OMAP1510_I2C) += omap1510_i2c.o COBJS-$(CONFIG_DRIVER_OMAP24XX_I2C) += omap24xx_i2c.o diff --git a/arch/arm/cpu/pxa/i2c.c b/drivers/i2c/mv_i2c.c index 7aa49ae..dcbe1ae 100644 --- a/arch/arm/cpu/pxa/i2c.c +++ b/drivers/i2c/mv_i2c.c @@ -8,6 +8,9 @@ * (C) Copyright 2003 Pengutronix e.K. * Robert Schwebel <r.schwebel@pengutronix.de> * + * (C) Copyright 2011 Marvell Inc. + * Lei Wen <leiwen@marvell.com> + * * See file CREDITS for list of people who contributed to this * project. * @@ -30,32 +33,12 @@ * Murray.Jensen@cmst.csiro.au, 27-Jan-01. */ -/* FIXME: this file is PXA255 specific! What about other XScales? */ - #include <common.h> #include <asm/io.h> #ifdef CONFIG_HARD_I2C - -/* - * - CONFIG_SYS_I2C_SPEED - * - I2C_PXA_SLAVE_ADDR - */ - -#include <asm/arch/hardware.h> -#include <asm/arch/pxa-regs.h> #include <i2c.h> - -/*#define DEBUG_I2C 1 /###* activate local debugging output */ -#define I2C_PXA_SLAVE_ADDR 0x1 /* slave pxa unit address */ - -#if (CONFIG_SYS_I2C_SPEED == 400000) -#define I2C_ICR_INIT (ICR_FM | ICR_BEIE | ICR_IRFIE | ICR_ITEIE | ICR_GCD | ICR_SCLE) -#else -#define I2C_ICR_INIT (ICR_BEIE | ICR_IRFIE | ICR_ITEIE | ICR_GCD | ICR_SCLE) -#endif - -#define I2C_ISR_INIT 0x7FF +#include "mv_i2c.h" #ifdef DEBUG_I2C #define PRINTD(x) printf x @@ -63,21 +46,6 @@ #define PRINTD(x) #endif - -/* Shall the current transfer have a start/stop condition? */ -#define I2C_COND_NORMAL 0 -#define I2C_COND_START 1 -#define I2C_COND_STOP 2 - -/* Shall the current transfer be ack/nacked or being waited for it? */ -#define I2C_ACKNAK_WAITACK 1 -#define I2C_ACKNAK_SENDACK 2 -#define I2C_ACKNAK_SENDNAK 4 - -/* Specify who shall transfer the data (master or slave) */ -#define I2C_READ 0 -#define I2C_WRITE 1 - /* All transfers are described by this data structure */ struct i2c_msg { u8 condition; @@ -86,53 +54,91 @@ struct i2c_msg { u8 data; }; +struct mv_i2c { + u32 ibmr; + u32 pad0; + u32 idbr; + u32 pad1; + u32 icr; + u32 pad2; + u32 isr; + u32 pad3; + u32 isar; +}; + +static struct mv_i2c *base; +#ifdef CONFIG_I2C_MULTI_BUS +static u32 i2c_regs[CONFIG_MV_I2C_NUM] = CONFIG_MV_I2C_REG; +static unsigned int bus_initialized[CONFIG_MV_I2C_NUM]; +static unsigned int current_bus; + +int i2c_set_bus_num(unsigned int bus) +{ + if ((bus < 0) || (bus >= CONFIG_MV_I2C_NUM)) { + printf("Bad bus: %d\n", bus); + return -1; + } + + base = (struct mv_i2c *)i2c_regs[bus]; + current_bus = bus; + + if (!bus_initialized[current_bus]) { + i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); + bus_initialized[current_bus] = 1; + } + + return 0; +} -/** - * i2c_pxa_reset: - reset the host controller +unsigned int i2c_get_bus_num(void) +{ + return current_bus; +} +#endif + +/* + * i2c_reset: - reset the host controller * */ - -static void i2c_reset( void ) +static void i2c_reset(void) { - writel(readl(ICR) & ~ICR_IUE, ICR); /* disable unit */ - writel(readl(ICR) | ICR_UR, ICR); /* reset the unit */ + writel(readl(&base->icr) & ~ICR_IUE, &base->icr); /* disable unit */ + writel(readl(&base->icr) | ICR_UR, &base->icr); /* reset the unit */ udelay(100); - writel(readl(ICR) & ~ICR_IUE, ICR); /* disable unit */ -#ifdef CONFIG_CPU_MONAHANS - /* | CKENB_1_PWM1 | CKENB_0_PWM0); */ - writel(readl(CKENB) | (CKENB_4_I2C), CKENB); -#else /* CONFIG_CPU_MONAHANS */ - /* set the global I2C clock on */ - writel(readl(CKEN) | CKEN14_I2C, CKEN); -#endif - writel(I2C_PXA_SLAVE_ADDR, ISAR); /* set our slave address */ - writel(I2C_ICR_INIT, ICR); /* set control reg values */ - writel(I2C_ISR_INIT, ISR); /* set clear interrupt bits */ - writel(readl(ICR) | ICR_IUE, ICR); /* enable unit */ + writel(readl(&base->icr) & ~ICR_IUE, &base->icr); /* disable unit */ + + i2c_clk_enable(); + + writel(CONFIG_SYS_I2C_SLAVE, &base->isar); /* set our slave address */ + writel(I2C_ICR_INIT, &base->icr); /* set control reg values */ + writel(I2C_ISR_INIT, &base->isr); /* set clear interrupt bits */ + writel(readl(&base->icr) | ICR_IUE, &base->icr); /* enable unit */ udelay(100); } - -/** +/* * i2c_isr_set_cleared: - wait until certain bits of the I2C status register * are set and cleared * * @return: 1 in case of success, 0 means timeout (no match within 10 ms). */ -static int i2c_isr_set_cleared( unsigned long set_mask, unsigned long cleared_mask ) +static int i2c_isr_set_cleared(unsigned long set_mask, + unsigned long cleared_mask) { - int timeout = 10000; + int timeout = 1000, isr; - while( ((ISR & set_mask)!=set_mask) || ((ISR & cleared_mask)!=0) ){ - udelay( 10 ); - if( timeout-- < 0 ) return 0; - } + do { + isr = readl(&base->isr); + udelay(10); + if (timeout-- < 0) + return 0; + } while (((isr & set_mask) != set_mask) + || ((isr & cleared_mask) != 0)); return 1; } - -/** +/* * i2c_transfer: - Transfer one byte over the i2c bus * * This function can tranfer a byte over the i2c bus in both directions. @@ -153,77 +159,71 @@ int i2c_transfer(struct i2c_msg *msg) if (!msg) goto transfer_error_msg_empty; - switch(msg->direction) { - + switch (msg->direction) { case I2C_WRITE: - /* check if bus is not busy */ - if (!i2c_isr_set_cleared(0,ISR_IBB)) + if (!i2c_isr_set_cleared(0, ISR_IBB)) goto transfer_error_bus_busy; /* start transmission */ - writel(readl(ICR) & ~ICR_START, ICR); - writel(readl(ICR) & ~ICR_STOP, ICR); - writel(msg->data, IDBR); + writel(readl(&base->icr) & ~ICR_START, &base->icr); + writel(readl(&base->icr) & ~ICR_STOP, &base->icr); + writel(msg->data, &base->idbr); if (msg->condition == I2C_COND_START) - writel(readl(ICR) | ICR_START, ICR); + writel(readl(&base->icr) | ICR_START, &base->icr); if (msg->condition == I2C_COND_STOP) - writel(readl(ICR) | ICR_STOP, ICR); + writel(readl(&base->icr) | ICR_STOP, &base->icr); if (msg->acknack == I2C_ACKNAK_SENDNAK) - writel(readl(ICR) | ICR_ACKNAK, ICR); + writel(readl(&base->icr) | ICR_ACKNAK, &base->icr); if (msg->acknack == I2C_ACKNAK_SENDACK) - writel(readl(ICR) & ~ICR_ACKNAK, ICR); - writel(readl(ICR) & ~ICR_ALDIE, ICR); - writel(readl(ICR) | ICR_TB, ICR); + writel(readl(&base->icr) & ~ICR_ACKNAK, &base->icr); + writel(readl(&base->icr) & ~ICR_ALDIE, &base->icr); + writel(readl(&base->icr) | ICR_TB, &base->icr); /* transmit register empty? */ - if (!i2c_isr_set_cleared(ISR_ITE,0)) + if (!i2c_isr_set_cleared(ISR_ITE, 0)) goto transfer_error_transmit_timeout; /* clear 'transmit empty' state */ - writel(readl(ISR) | ISR_ITE, ISR); + writel(readl(&base->isr) | ISR_ITE, &base->isr); /* wait for ACK from slave */ if (msg->acknack == I2C_ACKNAK_WAITACK) - if (!i2c_isr_set_cleared(0,ISR_ACKNAK)) + if (!i2c_isr_set_cleared(0, ISR_ACKNAK)) goto transfer_error_ack_missing; break; case I2C_READ: /* check if bus is not busy */ - if (!i2c_isr_set_cleared(0,ISR_IBB)) + if (!i2c_isr_set_cleared(0, ISR_IBB)) goto transfer_error_bus_busy; /* start receive */ - writel(readl(ICR) & ~ICR_START, ICR); - writel(readl(ICR) & ~ICR_STOP, ICR); + writel(readl(&base->icr) & ~ICR_START, &base->icr); + writel(readl(&base->icr) & ~ICR_STOP, &base->icr); if (msg->condition == I2C_COND_START) - writel(readl(ICR) | ICR_START, ICR); + writel(readl(&base->icr) | ICR_START, &base->icr); if (msg->condition == I2C_COND_STOP) - writel(readl(ICR) | ICR_STOP, ICR); + writel(readl(&base->icr) | ICR_STOP, &base->icr); if (msg->acknack == I2C_ACKNAK_SENDNAK) - writel(readl(ICR) | ICR_ACKNAK, ICR); + writel(readl(&base->icr) | ICR_ACKNAK, &base->icr); if (msg->acknack == I2C_ACKNAK_SENDACK) - writel(readl(ICR) & ~ICR_ACKNAK, ICR); - writel(readl(ICR) & ~ICR_ALDIE, ICR); - writel(readl(ICR) | ICR_TB, ICR); + writel(readl(&base->icr) & ~ICR_ACKNAK, &base->icr); + writel(readl(&base->icr) & ~ICR_ALDIE, &base->icr); + writel(readl(&base->icr) | ICR_TB, &base->icr); /* receive register full? */ - if (!i2c_isr_set_cleared(ISR_IRF,0)) + if (!i2c_isr_set_cleared(ISR_IRF, 0)) goto transfer_error_receive_timeout; - msg->data = readl(IDBR); + msg->data = readl(&base->idbr); /* clear 'receive empty' state */ - writel(readl(ISR) | ISR_IRF, ISR); - + writel(readl(&base->isr) | ISR_IRF, &base->isr); break; - default: - goto transfer_error_illegal_param; - } return 0; @@ -253,34 +253,47 @@ transfer_error_bus_busy: ret = -6; goto i2c_transfer_finish; i2c_transfer_finish: - PRINTD(("i2c_transfer: ISR: 0x%04x\n",ISR)); + PRINTD(("i2c_transfer: ISR: 0x%04x\n", ISR)); i2c_reset(); return ret; - } /* ------------------------------------------------------------------------ */ /* API Functions */ /* ------------------------------------------------------------------------ */ - void i2c_init(int speed, int slaveaddr) { +#ifdef CONFIG_I2C_MULTI_BUS + base = (struct mv_i2c *)i2c_regs[current_bus]; +#else + base = (struct mv_i2c *)CONFIG_MV_I2C_REG; +#endif + #ifdef CONFIG_SYS_I2C_INIT_BOARD - /* call board specific i2c bus reset routine before accessing the */ - /* environment, which might be in a chip on that bus. For details */ - /* about this problem see doc/I2C_Edge_Conditions. */ + u32 icr; + /* + * call board specific i2c bus reset routine before accessing the + * environment, which might be in a chip on that bus. For details + * about this problem see doc/I2C_Edge_Conditions. + * + * disable I2C controller first, otherwhise it thinks we want to + * talk to the slave port... + */ + icr = readl(&base->icr); + writel(readl(&base->icr) & ~(ICR_SCLE | ICR_IUE), &base->icr); + i2c_init_board(); + + writel(icr, &base->icr); #endif } - -/** +/* * i2c_probe: - Test if a chip answers for a given i2c address * * @chip: address of the chip which is searched for * @return: 0 if a chip was found, -1 otherwhise */ - int i2c_probe(uchar chip) { struct i2c_msg msg; @@ -291,19 +304,20 @@ int i2c_probe(uchar chip) msg.acknack = I2C_ACKNAK_WAITACK; msg.direction = I2C_WRITE; msg.data = (chip << 1) + 1; - if (i2c_transfer(&msg)) return -1; + if (i2c_transfer(&msg)) + return -1; msg.condition = I2C_COND_STOP; msg.acknack = I2C_ACKNAK_SENDNAK; msg.direction = I2C_READ; msg.data = 0x00; - if (i2c_transfer(&msg)) return -1; + if (i2c_transfer(&msg)) + return -1; return 0; } - -/** +/* * i2c_read: - Read multiple bytes from an i2c device * * The higher level routines take into account that this function is only @@ -316,14 +330,13 @@ int i2c_probe(uchar chip) * @len: how much byte do we want to read * @return: 0 in case of success */ - int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len) { struct i2c_msg msg; u8 addr_bytes[3]; /* lowest...highest byte of data address */ - int ret; - PRINTD(("i2c_read(chip=0x%02x, addr=0x%02x, alen=0x%02x, len=0x%02x)\n",chip,addr,alen,len)); + PRINTD(("i2c_read(chip=0x%02x, addr=0x%02x, alen=0x%02x, " + "len=0x%02x)\n", chip, addr, alen, len)); i2c_reset(); @@ -332,9 +345,10 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len) msg.condition = I2C_COND_START; msg.acknack = I2C_ACKNAK_WAITACK; msg.direction = I2C_WRITE; - msg.data = (chip << 1); - msg.data &= 0xFE; - if ((ret=i2c_transfer(&msg))) return -1; + msg.data = (chip << 1); + msg.data &= 0xFE; + if (i2c_transfer(&msg)) + return -1; /* * send memory address bytes; @@ -346,16 +360,15 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len) addr_bytes[2] = (u8)((addr >> 16) & 0x000000FF); while (--alen >= 0) { - - PRINTD(("i2c_read: send memory word address byte %1d\n",alen)); + PRINTD(("i2c_read: send memory word address byte %1d\n", alen)); msg.condition = I2C_COND_NORMAL; msg.acknack = I2C_ACKNAK_WAITACK; msg.direction = I2C_WRITE; msg.data = addr_bytes[alen]; - if ((ret=i2c_transfer(&msg))) return -1; + if (i2c_transfer(&msg)) + return -1; } - /* start read sequence */ PRINTD(("i2c_read: start read sequence\n")); msg.condition = I2C_COND_START; @@ -363,12 +376,12 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len) msg.direction = I2C_WRITE; msg.data = (chip << 1); msg.data |= 0x01; - if ((ret=i2c_transfer(&msg))) return -1; + if (i2c_transfer(&msg)) + return -1; /* read bytes; send NACK at last byte */ while (len--) { - - if (len==0) { + if (len == 0) { msg.condition = I2C_COND_STOP; msg.acknack = I2C_ACKNAK_SENDNAK; } else { @@ -378,12 +391,13 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len) msg.direction = I2C_READ; msg.data = 0x00; - if ((ret=i2c_transfer(&msg))) return -1; + if (i2c_transfer(&msg)) + return -1; *buffer = msg.data; - PRINTD(("i2c_read: reading byte (0x%08x)=0x%02x\n",(unsigned int)buffer,*buffer)); + PRINTD(("i2c_read: reading byte (0x%08x)=0x%02x\n", + (unsigned int)buffer, *buffer)); buffer++; - } i2c_reset(); @@ -391,8 +405,7 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len) return 0; } - -/** +/* * i2c_write: - Write multiple bytes to an i2c device * * The higher level routines take into account that this function is only @@ -405,13 +418,13 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len) * @len: how much byte do we want to read * @return: 0 in case of success */ - int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len) { struct i2c_msg msg; u8 addr_bytes[3]; /* lowest...highest byte of data address */ - PRINTD(("i2c_write(chip=0x%02x, addr=0x%02x, alen=0x%02x, len=0x%02x)\n",chip,addr,alen,len)); + PRINTD(("i2c_write(chip=0x%02x, addr=0x%02x, alen=0x%02x, " + "len=0x%02x)\n", chip, addr, alen, len)); i2c_reset(); @@ -420,9 +433,10 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len) msg.condition = I2C_COND_START; msg.acknack = I2C_ACKNAK_WAITACK; msg.direction = I2C_WRITE; - msg.data = (chip << 1); - msg.data &= 0xFE; - if (i2c_transfer(&msg)) return -1; + msg.data = (chip << 1); + msg.data &= 0xFE; + if (i2c_transfer(&msg)) + return -1; /* * send memory address bytes; @@ -433,21 +447,21 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len) addr_bytes[2] = (u8)((addr >> 16) & 0x000000FF); while (--alen >= 0) { - PRINTD(("i2c_write: send memory word address\n")); msg.condition = I2C_COND_NORMAL; msg.acknack = I2C_ACKNAK_WAITACK; msg.direction = I2C_WRITE; msg.data = addr_bytes[alen]; - if (i2c_transfer(&msg)) return -1; + if (i2c_transfer(&msg)) + return -1; } /* write bytes; send NACK at last byte */ while (len--) { + PRINTD(("i2c_write: writing byte (0x%08x)=0x%02x\n", + (unsigned int)buffer, *buffer)); - PRINTD(("i2c_write: writing byte (0x%08x)=0x%02x\n",(unsigned int)buffer,*buffer)); - - if (len==0) + if (len == 0) msg.condition = I2C_COND_STOP; else msg.condition = I2C_COND_NORMAL; @@ -456,14 +470,12 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len) msg.direction = I2C_WRITE; msg.data = *(buffer++); - if (i2c_transfer(&msg)) return -1; - + if (i2c_transfer(&msg)) + return -1; } i2c_reset(); return 0; - } - #endif /* CONFIG_HARD_I2C */ diff --git a/drivers/i2c/mv_i2c.h b/drivers/i2c/mv_i2c.h new file mode 100644 index 0000000..41af0d9 --- /dev/null +++ b/drivers/i2c/mv_i2c.h @@ -0,0 +1,83 @@ +/* + * (C) Copyright 2011 + * Marvell Inc, <www.marvell.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _MV_I2C_H_ +#define _MV_I2C_H_ +extern void i2c_clk_enable(void); + +/* Shall the current transfer have a start/stop condition? */ +#define I2C_COND_NORMAL 0 +#define I2C_COND_START 1 +#define I2C_COND_STOP 2 + +/* Shall the current transfer be ack/nacked or being waited for it? */ +#define I2C_ACKNAK_WAITACK 1 +#define I2C_ACKNAK_SENDACK 2 +#define I2C_ACKNAK_SENDNAK 4 + +/* Specify who shall transfer the data (master or slave) */ +#define I2C_READ 0 +#define I2C_WRITE 1 + +#if (CONFIG_SYS_I2C_SPEED == 400000) +#define I2C_ICR_INIT (ICR_FM | ICR_BEIE | ICR_IRFIE | ICR_ITEIE | ICR_GCD \ + | ICR_SCLE) +#else +#define I2C_ICR_INIT (ICR_BEIE | ICR_IRFIE | ICR_ITEIE | ICR_GCD | ICR_SCLE) +#endif + +#define I2C_ISR_INIT 0x7FF +/* ----- Control register bits ---------------------------------------- */ + +#define ICR_START 0x1 /* start bit */ +#define ICR_STOP 0x2 /* stop bit */ +#define ICR_ACKNAK 0x4 /* send ACK(0) or NAK(1) */ +#define ICR_TB 0x8 /* transfer byte bit */ +#define ICR_MA 0x10 /* master abort */ +#define ICR_SCLE 0x20 /* master clock enable, mona SCLEA */ +#define ICR_IUE 0x40 /* unit enable */ +#define ICR_GCD 0x80 /* general call disable */ +#define ICR_ITEIE 0x100 /* enable tx interrupts */ +#define ICR_IRFIE 0x200 /* enable rx interrupts, mona: DRFIE */ +#define ICR_BEIE 0x400 /* enable bus error ints */ +#define ICR_SSDIE 0x800 /* slave STOP detected int enable */ +#define ICR_ALDIE 0x1000 /* enable arbitration interrupt */ +#define ICR_SADIE 0x2000 /* slave address detected int enable */ +#define ICR_UR 0x4000 /* unit reset */ +#define ICR_FM 0x8000 /* Fast Mode */ + +/* ----- Status register bits ----------------------------------------- */ + +#define ISR_RWM 0x1 /* read/write mode */ +#define ISR_ACKNAK 0x2 /* ack/nak status */ +#define ISR_UB 0x4 /* unit busy */ +#define ISR_IBB 0x8 /* bus busy */ +#define ISR_SSD 0x10 /* slave stop detected */ +#define ISR_ALD 0x20 /* arbitration loss detected */ +#define ISR_ITE 0x40 /* tx buffer empty */ +#define ISR_IRF 0x80 /* rx buffer full */ +#define ISR_GCAD 0x100 /* general call address detected */ +#define ISR_SAD 0x200 /* slave address detected */ +#define ISR_BED 0x400 /* bus error no ACK/NAK */ + +#endif diff --git a/drivers/i2c/mvtwsi.c b/drivers/i2c/mvtwsi.c index 16a536f..5be6dbb 100644 --- a/drivers/i2c/mvtwsi.c +++ b/drivers/i2c/mvtwsi.c @@ -2,7 +2,7 @@ * Driver for the TWSI (i2c) controller found on the Marvell * orion5x and kirkwood SoC families. * - * Author: Albert Aribaud <albert.aribaud@free.fr> + * Author: Albert Aribaud <albert.u.boot@aribaud.net> * Copyright (c) 2010 Albert Aribaud. * * See file CREDITS for list of people who contributed to this diff --git a/drivers/i2c/mxc_i2c.c b/drivers/i2c/mxc_i2c.c index c5ec486..89d1973 100644 --- a/drivers/i2c/mxc_i2c.c +++ b/drivers/i2c/mxc_i2c.c @@ -27,13 +27,8 @@ #if defined(CONFIG_HARD_I2C) -#if defined(CONFIG_MX31) -#include <asm/arch/mx31.h> -#include <asm/arch/mx31-regs.h> -#else -#include <asm/arch/imx-regs.h> #include <asm/arch/clock.h> -#endif +#include <asm/arch/imx-regs.h> #define IADR 0x00 #define IFDR 0x04 diff --git a/drivers/i2c/omap24xx_i2c.c b/drivers/i2c/omap24xx_i2c.c index 215be34..71251d8 100644 --- a/drivers/i2c/omap24xx_i2c.c +++ b/drivers/i2c/omap24xx_i2c.c @@ -321,43 +321,23 @@ int i2c_probe (uchar chip) /* wait until bus not busy */ wait_for_bb (); - /* try to read one byte */ + /* try to write one byte */ writew (1, &i2c_base->cnt); /* set slave address */ writew (chip, &i2c_base->sa); /* stop bit needed here */ - writew (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_STP, &i2c_base->con); + writew(I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX | + I2C_CON_STP, &i2c_base->con); - while (1) { - status = wait_for_pin(); - if (status == 0 || status & I2C_STAT_AL) { - res = 1; - goto probe_exit; - } - if (status & I2C_STAT_NACK) { - res = 1; - writew(0xff, &i2c_base->stat); - writew (readw (&i2c_base->con) | I2C_CON_STP, &i2c_base->con); - wait_for_bb (); - break; - } - if (status & I2C_STAT_ARDY) { - writew(I2C_STAT_ARDY, &i2c_base->stat); - break; - } - if (status & I2C_STAT_RRDY) { - res = 0; -#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \ - defined(CONFIG_OMAP44XX) - readb(&i2c_base->data); -#else - readw(&i2c_base->data); -#endif - writew(I2C_STAT_RRDY, &i2c_base->stat); - } - } + status = wait_for_pin(); + + /* check for ACK (!NAK) */ + if (!(status & I2C_STAT_NACK)) + res = 0; + + /* abort transfer (force idle state) */ + writew(0, &i2c_base->con); -probe_exit: flush_fifo(); writew (0, &i2c_base->cnt); /* don't allow any more data in...we don't want it.*/ writew(0xFFFF, &i2c_base->stat); diff --git a/drivers/i2c/soft_i2c.c b/drivers/i2c/soft_i2c.c index 69b5f42..9b02e89 100644 --- a/drivers/i2c/soft_i2c.c +++ b/drivers/i2c/soft_i2c.c @@ -286,6 +286,7 @@ int i2c_set_bus_num(unsigned int bus) int ret; ret = i2x_mux_select_mux(bus); + i2c_init_board(); if (ret == 0) i2c_bus_num = bus; else diff --git a/drivers/misc/fsl_law.c b/drivers/misc/fsl_law.c index 031c974..3233ff2 100644 --- a/drivers/misc/fsl_law.c +++ b/drivers/misc/fsl_law.c @@ -24,6 +24,7 @@ */ #include <common.h> +#include <linux/compiler.h> #include <asm/fsl_law.h> #include <asm/io.h> @@ -246,6 +247,25 @@ void init_laws(void) #error FSL_HW_NUM_LAWS can not be greater than 32 w/o code changes #endif + /* + * Any LAWs that were set up before we booted assume they are meant to + * be around and mark them used. + */ + for (i = 0; i < FSL_HW_NUM_LAWS; i++) { + u32 lawar = in_be32(LAWAR_ADDR(i)); + + if (lawar & LAW_EN) + gd->used_laws |= (1 << i); + } + +#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) + /* + * in NAND boot we've already parsed the law_table and setup those LAWs + * so don't do it again. + */ + return; +#endif + for (i = 0; i < num_law_entries; i++) { if (law_table[i].index == -1) set_next_law(law_table[i].addr, law_table[i].size, diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile index 3496f0a..a8fe17a 100644 --- a/drivers/mmc/Makefile +++ b/drivers/mmc/Makefile @@ -31,6 +31,8 @@ COBJS-$(CONFIG_DAVINCI_MMC) += davinci_mmc.o COBJS-$(CONFIG_FSL_ESDHC) += fsl_esdhc.o COBJS-$(CONFIG_GENERIC_MMC) += mmc.o COBJS-$(CONFIG_GENERIC_ATMEL_MCI) += gen_atmel_mci.o +COBJS-$(CONFIG_MMC_SPI) += mmc_spi.o +COBJS-$(CONFIG_ARM_PL180_MMCI) += arm_pl180_mmci.o COBJS-$(CONFIG_MXC_MMC) += mxcmmc.o COBJS-$(CONFIG_OMAP3_MMC) += omap3_mmc.o COBJS-$(CONFIG_OMAP_HSMMC) += omap_hsmmc.o diff --git a/drivers/mmc/arm_pl180_mmci.c b/drivers/mmc/arm_pl180_mmci.c new file mode 100644 index 0000000..ed296ee --- /dev/null +++ b/drivers/mmc/arm_pl180_mmci.c @@ -0,0 +1,443 @@ +/* + * ARM PrimeCell MultiMedia Card Interface - PL180 + * + * Copyright (C) ST-Ericsson SA 2010 + * + * Author: Ulf Hansson <ulf.hansson@stericsson.com> + * Author: Martin Lundholm <martin.xa.lundholm@stericsson.com> + * Ported to drivers/mmc/ by: Matt Waddel <matt.waddel@linaro.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* #define DEBUG */ + +#include <asm/io.h> +#include "common.h" +#include <errno.h> +#include <mmc.h> +#include "arm_pl180_mmci.h" +#include <malloc.h> + +struct mmc_host { + struct sdi_registers *base; +}; + +static int wait_for_command_end(struct mmc *dev, struct mmc_cmd *cmd) +{ + u32 hoststatus, statusmask; + struct mmc_host *host = dev->priv; + + statusmask = SDI_STA_CTIMEOUT | SDI_STA_CCRCFAIL; + if ((cmd->resp_type & MMC_RSP_PRESENT)) + statusmask |= SDI_STA_CMDREND; + else + statusmask |= SDI_STA_CMDSENT; + + do + hoststatus = readl(&host->base->status) & statusmask; + while (!hoststatus); + + writel(statusmask, &host->base->status_clear); + if (hoststatus & SDI_STA_CTIMEOUT) { + printf("CMD%d time out\n", cmd->cmdidx); + return -ETIMEDOUT; + } else if ((hoststatus & SDI_STA_CCRCFAIL) && + (cmd->flags & MMC_RSP_CRC)) { + printf("CMD%d CRC error\n", cmd->cmdidx); + return -EILSEQ; + } + + if (cmd->resp_type & MMC_RSP_PRESENT) { + cmd->response[0] = readl(&host->base->response0); + cmd->response[1] = readl(&host->base->response1); + cmd->response[2] = readl(&host->base->response2); + cmd->response[3] = readl(&host->base->response3); + debug("CMD%d response[0]:0x%08X, response[1]:0x%08X, " + "response[2]:0x%08X, response[3]:0x%08X\n", + cmd->cmdidx, cmd->response[0], cmd->response[1], + cmd->response[2], cmd->response[3]); + } + + return 0; +} + +/* send command to the mmc card and wait for results */ +static int do_command(struct mmc *dev, struct mmc_cmd *cmd) +{ + int result; + u32 sdi_cmd = 0; + struct mmc_host *host = dev->priv; + + sdi_cmd = ((cmd->cmdidx & SDI_CMD_CMDINDEX_MASK) | SDI_CMD_CPSMEN); + + if (cmd->resp_type) { + sdi_cmd |= SDI_CMD_WAITRESP; + if (cmd->resp_type & MMC_RSP_136) + sdi_cmd |= SDI_CMD_LONGRESP; + } + + writel((u32)cmd->cmdarg, &host->base->argument); + udelay(COMMAND_REG_DELAY); + writel(sdi_cmd, &host->base->command); + result = wait_for_command_end(dev, cmd); + + /* After CMD2 set RCA to a none zero value. */ + if ((result == 0) && (cmd->cmdidx == MMC_CMD_ALL_SEND_CID)) + dev->rca = 10; + + /* After CMD3 open drain is switched off and push pull is used. */ + if ((result == 0) && (cmd->cmdidx == MMC_CMD_SET_RELATIVE_ADDR)) { + u32 sdi_pwr = readl(&host->base->power) & ~SDI_PWR_OPD; + writel(sdi_pwr, &host->base->power); + } + + return result; +} + +static int read_bytes(struct mmc *dev, u32 *dest, u32 blkcount, u32 blksize) +{ + u32 *tempbuff = dest; + int i; + u64 xfercount = blkcount * blksize; + struct mmc_host *host = dev->priv; + u32 status, status_err; + + debug("read_bytes: blkcount=%u blksize=%u\n", blkcount, blksize); + + status = readl(&host->base->status); + status_err = status & (SDI_STA_DCRCFAIL | SDI_STA_DTIMEOUT | + SDI_STA_RXOVERR); + while (!status_err && + (xfercount >= SDI_FIFO_BURST_SIZE * sizeof(u32))) { + if (status & SDI_STA_RXFIFOBR) { + for (i = 0; i < SDI_FIFO_BURST_SIZE; i++) + *(tempbuff + i) = readl(&host->base->fifo); + tempbuff += SDI_FIFO_BURST_SIZE; + xfercount -= SDI_FIFO_BURST_SIZE * sizeof(u32); + } + status = readl(&host->base->status); + status_err = status & + (SDI_STA_DCRCFAIL | SDI_STA_DTIMEOUT | SDI_STA_RXOVERR); + } + + if (status & SDI_STA_DTIMEOUT) { + printf("Read data timed out, xfercount: %llu, status: 0x%08X\n", + xfercount, status); + return -ETIMEDOUT; + } else if (status & SDI_STA_DCRCFAIL) { + printf("Read data blk CRC error: 0x%x\n", status); + return -EILSEQ; + } else if (status & SDI_STA_RXOVERR) { + printf("Read data RX overflow error\n"); + return -EIO; + } + + while ((!status_err) && (xfercount >= sizeof(u32))) { + if (status & SDI_STA_RXDAVL) { + *(tempbuff) = readl(&host->base->fifo); + tempbuff++; + xfercount -= sizeof(u32); + } + status = readl(&host->base->status); + status_err = status & (SDI_STA_DCRCFAIL | SDI_STA_DTIMEOUT | + SDI_STA_RXOVERR); + } + + status_err = status & + (SDI_STA_DCRCFAIL | SDI_STA_DTIMEOUT | SDI_STA_DBCKEND | + SDI_STA_RXOVERR); + while (!status_err) { + status = readl(&host->base->status); + status_err = status & + (SDI_STA_DCRCFAIL | SDI_STA_DTIMEOUT | SDI_STA_DBCKEND | + SDI_STA_RXOVERR); + } + + if (status & SDI_STA_DTIMEOUT) { + printf("Read data timed out, xfercount: %llu, status: 0x%08X\n", + xfercount, status); + return -ETIMEDOUT; + } else if (status & SDI_STA_DCRCFAIL) { + printf("Read data bytes CRC error: 0x%x\n", status); + return -EILSEQ; + } else if (status & SDI_STA_RXOVERR) { + printf("Read data RX overflow error\n"); + return -EIO; + } + + writel(SDI_ICR_MASK, &host->base->status_clear); + + if (xfercount) { + printf("Read data error, xfercount: %llu\n", xfercount); + return -ENOBUFS; + } + + return 0; +} + +static int write_bytes(struct mmc *dev, u32 *src, u32 blkcount, u32 blksize) +{ + u32 *tempbuff = src; + int i; + u64 xfercount = blkcount * blksize; + struct mmc_host *host = dev->priv; + u32 status, status_err; + + debug("write_bytes: blkcount=%u blksize=%u\n", blkcount, blksize); + + status = readl(&host->base->status); + status_err = status & (SDI_STA_DCRCFAIL | SDI_STA_DTIMEOUT); + while (!status_err && xfercount) { + if (status & SDI_STA_TXFIFOBW) { + if (xfercount >= SDI_FIFO_BURST_SIZE * sizeof(u32)) { + for (i = 0; i < SDI_FIFO_BURST_SIZE; i++) + writel(*(tempbuff + i), + &host->base->fifo); + tempbuff += SDI_FIFO_BURST_SIZE; + xfercount -= SDI_FIFO_BURST_SIZE * sizeof(u32); + } else { + while (xfercount >= sizeof(u32)) { + writel(*(tempbuff), &host->base->fifo); + tempbuff++; + xfercount -= sizeof(u32); + } + } + } + status = readl(&host->base->status); + status_err = status & (SDI_STA_DCRCFAIL | SDI_STA_DTIMEOUT); + } + + status_err = status & + (SDI_STA_DCRCFAIL | SDI_STA_DTIMEOUT | SDI_STA_DBCKEND); + while (!status_err) { + status = readl(&host->base->status); + status_err = status & + (SDI_STA_DCRCFAIL | SDI_STA_DTIMEOUT | SDI_STA_DBCKEND); + } + + if (status & SDI_STA_DTIMEOUT) { + printf("Write data timed out, xfercount:%llu,status:0x%08X\n", + xfercount, status); + return -ETIMEDOUT; + } else if (status & SDI_STA_DCRCFAIL) { + printf("Write data CRC error\n"); + return -EILSEQ; + } + + writel(SDI_ICR_MASK, &host->base->status_clear); + + if (xfercount) { + printf("Write data error, xfercount:%llu", xfercount); + return -ENOBUFS; + } + + return 0; +} + +static int do_data_transfer(struct mmc *dev, + struct mmc_cmd *cmd, + struct mmc_data *data) +{ + int error = -ETIMEDOUT; + struct mmc_host *host = dev->priv; + u32 blksz = 0; + u32 data_ctrl = 0; + u32 data_len = (u32) (data->blocks * data->blocksize); + + blksz = (ffs(data->blocksize) - 1); + data_ctrl |= ((blksz << 4) & SDI_DCTRL_DBLKSIZE_MASK); + data_ctrl |= SDI_DCTRL_DTEN; + + writel(SDI_DTIMER_DEFAULT, &host->base->datatimer); + writel(data_len, &host->base->datalength); + udelay(DATA_REG_DELAY); + + if (data->flags & MMC_DATA_READ) { + data_ctrl |= SDI_DCTRL_DTDIR_IN; + writel(data_ctrl, &host->base->datactrl); + + error = do_command(dev, cmd); + if (error) + return error; + + error = read_bytes(dev, (u32 *)data->dest, (u32)data->blocks, + (u32)data->blocksize); + } else if (data->flags & MMC_DATA_WRITE) { + error = do_command(dev, cmd); + if (error) + return error; + + writel(data_ctrl, &host->base->datactrl); + error = write_bytes(dev, (u32 *)data->src, (u32)data->blocks, + (u32)data->blocksize); + } + + return error; +} + +static int host_request(struct mmc *dev, + struct mmc_cmd *cmd, + struct mmc_data *data) +{ + int result; + + if (data) + result = do_data_transfer(dev, cmd, data); + else + result = do_command(dev, cmd); + + return result; +} + +/* MMC uses open drain drivers in the enumeration phase */ +static int mmc_host_reset(struct mmc *dev) +{ + struct mmc_host *host = dev->priv; + u32 sdi_u32 = SDI_PWR_OPD | SDI_PWR_PWRCTRL_ON; + + writel(sdi_u32, &host->base->power); + + return 0; +} + +static void host_set_ios(struct mmc *dev) +{ + struct mmc_host *host = dev->priv; + u32 sdi_clkcr; + + sdi_clkcr = readl(&host->base->clock); + + /* Ramp up the clock rate */ + if (dev->clock) { + u32 clkdiv = 0; + + if (dev->clock >= dev->f_max) + dev->clock = dev->f_max; + + clkdiv = ((ARM_MCLK / dev->clock) / 2) - 1; + + if (clkdiv > SDI_CLKCR_CLKDIV_MASK) + clkdiv = SDI_CLKCR_CLKDIV_MASK; + + sdi_clkcr &= ~(SDI_CLKCR_CLKDIV_MASK); + sdi_clkcr |= clkdiv; + } + + /* Set the bus width */ + if (dev->bus_width) { + u32 buswidth = 0; + + switch (dev->bus_width) { + case 1: + buswidth |= SDI_CLKCR_WIDBUS_1; + break; + case 4: + buswidth |= SDI_CLKCR_WIDBUS_4; + break; + default: + printf("Invalid bus width\n"); + break; + } + sdi_clkcr &= ~(SDI_CLKCR_WIDBUS_MASK); + sdi_clkcr |= buswidth; + } + + writel(sdi_clkcr, &host->base->clock); + udelay(CLK_CHANGE_DELAY); +} + +struct mmc *alloc_mmc_struct(void) +{ + struct mmc_host *host = NULL; + struct mmc *mmc_device = NULL; + + host = malloc(sizeof(struct mmc_host)); + if (!host) + return NULL; + + mmc_device = malloc(sizeof(struct mmc)); + if (!mmc_device) + goto err; + + mmc_device->priv = host; + return mmc_device; + +err: + free(host); + return NULL; +} + +/* + * mmc_host_init - initialize the mmc controller. + * Set initial clock and power for mmc slot. + * Initialize mmc struct and register with mmc framework. + */ +static int arm_pl180_mmci_host_init(struct mmc *dev) +{ + struct mmc_host *host = dev->priv; + u32 sdi_u32; + + host->base = (struct sdi_registers *)CONFIG_ARM_PL180_MMCI_BASE; + + /* Initially set power-on, full voltage & MMCI read */ + sdi_u32 = INIT_PWR; + writel(sdi_u32, &host->base->power); + + /* setting clk freq 505KHz */ + sdi_u32 = SDI_CLKCR_CLKDIV_INIT | SDI_CLKCR_CLKEN; + writel(sdi_u32, &host->base->clock); + udelay(CLK_CHANGE_DELAY); + + /* Disable mmc interrupts */ + sdi_u32 = readl(&host->base->mask0) & ~SDI_MASK0_MASK; + writel(sdi_u32, &host->base->mask0); + + sprintf(dev->name, "MMC"); + dev->clock = ARM_MCLK / (2 * (SDI_CLKCR_CLKDIV_INIT + 1)); + dev->send_cmd = host_request; + dev->set_ios = host_set_ios; + dev->init = mmc_host_reset; + dev->host_caps = 0; + dev->voltages = VOLTAGE_WINDOW_MMC; + dev->f_min = dev->clock; + dev->f_max = CONFIG_ARM_PL180_MMCI_CLOCK_FREQ; + + return 0; +} + +int arm_pl180_mmci_init(void) +{ + int error; + struct mmc *dev; + + dev = alloc_mmc_struct(); + if (!dev) + return -1; + + error = arm_pl180_mmci_host_init(dev); + if (error) { + printf("mmci_host_init error - %d\n", error); + return -1; + } + + dev->b_max = 0; + + mmc_register(dev); + debug("registered mmc interface number is:%d\n", dev->block_dev.dev); + + return 0; +} diff --git a/drivers/mmc/arm_pl180_mmci.h b/drivers/mmc/arm_pl180_mmci.h new file mode 100644 index 0000000..42fbe3e --- /dev/null +++ b/drivers/mmc/arm_pl180_mmci.h @@ -0,0 +1,183 @@ +/* + * ARM PrimeCell MultiMedia Card Interface - PL180 + * + * Copyright (C) ST-Ericsson SA 2010 + * + * Author: Ulf Hansson <ulf.hansson@stericsson.com> + * Author: Martin Lundholm <martin.xa.lundholm@stericsson.com> + * Ported to drivers/mmc/ by: Matt Waddel <matt.waddel@linaro.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ARM_PL180_MMCI_H__ +#define __ARM_PL180_MMCI_H__ + +int arm_pl180_mmci_init(void); + +#define COMMAND_REG_DELAY 300 +#define DATA_REG_DELAY 1000 +#define CLK_CHANGE_DELAY 2000 + +#define INIT_PWR 0xBF /* Power on, full power, not open drain */ +#define ARM_MCLK (100*1000*1000) + +/* SDI Power Control register bits */ +#define SDI_PWR_PWRCTRL_MASK 0x00000003 +#define SDI_PWR_PWRCTRL_ON 0x00000003 +#define SDI_PWR_PWRCTRL_OFF 0x00000000 +#define SDI_PWR_DAT2DIREN 0x00000004 +#define SDI_PWR_CMDDIREN 0x00000008 +#define SDI_PWR_DAT0DIREN 0x00000010 +#define SDI_PWR_DAT31DIREN 0x00000020 +#define SDI_PWR_OPD 0x00000040 +#define SDI_PWR_FBCLKEN 0x00000080 +#define SDI_PWR_DAT74DIREN 0x00000100 +#define SDI_PWR_RSTEN 0x00000200 + +#define VOLTAGE_WINDOW_MMC 0x00FF8080 +#define VOLTAGE_WINDOW_SD 0x80010000 + +/* SDI clock control register bits */ +#define SDI_CLKCR_CLKDIV_MASK 0x000000FF +#define SDI_CLKCR_CLKEN 0x00000100 +#define SDI_CLKCR_PWRSAV 0x00000200 +#define SDI_CLKCR_BYPASS 0x00000400 +#define SDI_CLKCR_WIDBUS_MASK 0x00001800 +#define SDI_CLKCR_WIDBUS_1 0x00000000 +#define SDI_CLKCR_WIDBUS_4 0x00000800 + +#define SDI_CLKCR_CLKDIV_INIT 0x000000C6 /* MCLK/(2*(0xC6+1)) => 505KHz */ + +/* SDI command register bits */ +#define SDI_CMD_CMDINDEX_MASK 0x000000FF +#define SDI_CMD_WAITRESP 0x00000040 +#define SDI_CMD_LONGRESP 0x00000080 +#define SDI_CMD_WAITINT 0x00000100 +#define SDI_CMD_WAITPEND 0x00000200 +#define SDI_CMD_CPSMEN 0x00000400 +#define SDI_CMD_SDIOSUSPEND 0x00000800 +#define SDI_CMD_ENDCMDCOMPL 0x00001000 +#define SDI_CMD_NIEN 0x00002000 +#define SDI_CMD_CE_ATACMD 0x00004000 +#define SDI_CMD_CBOOTMODEEN 0x00008000 + +#define SDI_DTIMER_DEFAULT 0xFFFF0000 + +/* SDI Status register bits */ +#define SDI_STA_CCRCFAIL 0x00000001 +#define SDI_STA_DCRCFAIL 0x00000002 +#define SDI_STA_CTIMEOUT 0x00000004 +#define SDI_STA_DTIMEOUT 0x00000008 +#define SDI_STA_TXUNDERR 0x00000010 +#define SDI_STA_RXOVERR 0x00000020 +#define SDI_STA_CMDREND 0x00000040 +#define SDI_STA_CMDSENT 0x00000080 +#define SDI_STA_DATAEND 0x00000100 +#define SDI_STA_STBITERR 0x00000200 +#define SDI_STA_DBCKEND 0x00000400 +#define SDI_STA_CMDACT 0x00000800 +#define SDI_STA_TXACT 0x00001000 +#define SDI_STA_RXACT 0x00002000 +#define SDI_STA_TXFIFOBW 0x00004000 +#define SDI_STA_RXFIFOBR 0x00008000 +#define SDI_STA_TXFIFOF 0x00010000 +#define SDI_STA_RXFIFOF 0x00020000 +#define SDI_STA_TXFIFOE 0x00040000 +#define SDI_STA_RXFIFOE 0x00080000 +#define SDI_STA_TXDAVL 0x00100000 +#define SDI_STA_RXDAVL 0x00200000 +#define SDI_STA_SDIOIT 0x00400000 +#define SDI_STA_CEATAEND 0x00800000 +#define SDI_STA_CARDBUSY 0x01000000 +#define SDI_STA_BOOTMODE 0x02000000 +#define SDI_STA_BOOTACKERR 0x04000000 +#define SDI_STA_BOOTACKTIMEOUT 0x08000000 +#define SDI_STA_RSTNEND 0x10000000 + +/* SDI Interrupt Clear register bits */ +#define SDI_ICR_MASK 0x1DC007FF +#define SDI_ICR_CCRCFAILC 0x00000001 +#define SDI_ICR_DCRCFAILC 0x00000002 +#define SDI_ICR_CTIMEOUTC 0x00000004 +#define SDI_ICR_DTIMEOUTC 0x00000008 +#define SDI_ICR_TXUNDERRC 0x00000010 +#define SDI_ICR_RXOVERRC 0x00000020 +#define SDI_ICR_CMDRENDC 0x00000040 +#define SDI_ICR_CMDSENTC 0x00000080 +#define SDI_ICR_DATAENDC 0x00000100 +#define SDI_ICR_STBITERRC 0x00000200 +#define SDI_ICR_DBCKENDC 0x00000400 +#define SDI_ICR_SDIOITC 0x00400000 +#define SDI_ICR_CEATAENDC 0x00800000 +#define SDI_ICR_BUSYENDC 0x01000000 +#define SDI_ICR_BOOTACKERRC 0x04000000 +#define SDI_ICR_BOOTACKTIMEOUTC 0x08000000 +#define SDI_ICR_RSTNENDC 0x10000000 + +#define SDI_MASK0_MASK 0x1FFFFFFF + +/* SDI Data control register bits */ +#define SDI_DCTRL_DTEN 0x00000001 +#define SDI_DCTRL_DTDIR_IN 0x00000002 +#define SDI_DCTRL_DTMODE_STREAM 0x00000004 +#define SDI_DCTRL_DMAEN 0x00000008 +#define SDI_DCTRL_DBLKSIZE_MASK 0x000000F0 +#define SDI_DCTRL_RWSTART 0x00000100 +#define SDI_DCTRL_RWSTOP 0x00000200 +#define SDI_DCTRL_RWMOD 0x00000200 +#define SDI_DCTRL_SDIOEN 0x00000800 +#define SDI_DCTRL_DMAREQCTL 0x00001000 +#define SDI_DCTRL_DBOOTMODEEN 0x00002000 +#define SDI_DCTRL_BUSYMODE 0x00004000 +#define SDI_DCTRL_DDR_MODE 0x00008000 + +#define SDI_FIFO_BURST_SIZE 8 + +struct sdi_registers { + u32 power; /* 0x00*/ + u32 clock; /* 0x04*/ + u32 argument; /* 0x08*/ + u32 command; /* 0x0c*/ + u32 respcommand; /* 0x10*/ + u32 response0; /* 0x14*/ + u32 response1; /* 0x18*/ + u32 response2; /* 0x1c*/ + u32 response3; /* 0x20*/ + u32 datatimer; /* 0x24*/ + u32 datalength; /* 0x28*/ + u32 datactrl; /* 0x2c*/ + u32 datacount; /* 0x30*/ + u32 status; /* 0x34*/ + u32 status_clear; /* 0x38*/ + u32 mask0; /* 0x3c*/ + u32 mask1; /* 0x40*/ + u32 card_select; /* 0x44*/ + u32 fifo_count; /* 0x48*/ + u32 padding1[(0x80-0x4C)>>2]; + u32 fifo; /* 0x80*/ + u32 padding2[(0xFE0-0x84)>>2]; + u32 periph_id0; /* 0xFE0 mmc Peripheral Identifcation Register*/ + u32 periph_id1; /* 0xFE4*/ + u32 periph_id2; /* 0xFE8*/ + u32 periph_id3; /* 0xFEC*/ + u32 pcell_id0; /* 0xFF0*/ + u32 pcell_id1; /* 0xFF4*/ + u32 pcell_id2; /* 0xFF8*/ + u32 pcell_id3; /* 0xFFC*/ +}; + +#endif diff --git a/drivers/mmc/bfin_sdh.c b/drivers/mmc/bfin_sdh.c index 27d9bf6..bc9057f 100644 --- a/drivers/mmc/bfin_sdh.c +++ b/drivers/mmc/bfin_sdh.c @@ -19,7 +19,7 @@ #include <asm/mach-common/bits/sdh.h> #include <asm/mach-common/bits/dma.h> -#if defined(__ADSPBF51x__) +#if defined(__ADSPBF50x__) || defined(__ADSPBF51x__) # define bfin_read_SDH_PWR_CTL bfin_read_RSI_PWR_CONTROL # define bfin_write_SDH_PWR_CTL bfin_write_RSI_PWR_CONTROL # define bfin_read_SDH_CLK_CTL bfin_read_RSI_CLK_CONTROL @@ -114,25 +114,26 @@ static int sdh_setup_data(struct mmc *mmc, struct mmc_data *data) u16 data_ctl = 0; u16 dma_cfg = 0; int ret = 0; + unsigned long data_size = data->blocksize * data->blocks; /* Don't support write yet. */ if (data->flags & MMC_DATA_WRITE) return UNUSABLE_ERR; - data_ctl |= ((ffs(data->blocksize) - 1) << 4); + data_ctl |= ((ffs(data_size) - 1) << 4); data_ctl |= DTX_DIR; bfin_write_SDH_DATA_CTL(data_ctl); dma_cfg = WDSIZE_32 | RESTART | WNR | DMAEN; - bfin_write_SDH_DATA_TIMER(0xFFFF); + bfin_write_SDH_DATA_TIMER(-1); blackfin_dcache_flush_invalidate_range(data->dest, - data->dest + data->blocksize); + data->dest + data_size); /* configure DMA */ bfin_write_DMA_START_ADDR(data->dest); - bfin_write_DMA_X_COUNT(data->blocksize / 4); + bfin_write_DMA_X_COUNT(data_size / 4); bfin_write_DMA_X_MODIFY(4); bfin_write_DMA_CONFIG(dma_cfg); - bfin_write_SDH_DATA_LGTH(data->blocksize); + bfin_write_SDH_DATA_LGTH(data_size); /* kick off transfer */ bfin_write_SDH_DATA_CTL(bfin_read_SDH_DATA_CTL() | DTX_DMA_E | DTX_E); @@ -256,6 +257,8 @@ int bfin_mmc_init(bd_t *bis) mmc->f_min = mmc->f_max >> 9; mmc->block_dev.part_type = PART_TYPE_DOS; + mmc->b_max = 0; + mmc_register(mmc); return 0; diff --git a/drivers/mmc/davinci_mmc.c b/drivers/mmc/davinci_mmc.c index d5d19eb..5d918e6 100644 --- a/drivers/mmc/davinci_mmc.c +++ b/drivers/mmc/davinci_mmc.c @@ -394,9 +394,8 @@ int davinci_mmc_init(bd_t *bis, struct davinci_mmc *host) mmc->voltages = host->voltages; mmc->host_caps = host->host_caps; -#ifdef CONFIG_MMC_MBLOCK mmc->b_max = DAVINCI_MAX_BLOCKS; -#endif + mmc_register(mmc); return 0; diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c index 0962ac4..d2355be 100644 --- a/drivers/mmc/fsl_esdhc.c +++ b/drivers/mmc/fsl_esdhc.c @@ -99,6 +99,10 @@ uint esdhc_xfertyp(struct mmc_cmd *cmd, struct mmc_data *data) else if (cmd->resp_type & MMC_RSP_PRESENT) xfertyp |= XFERTYP_RSPTYP_48; +#ifdef CONFIG_MX53 + if (cmd->cmdidx == MMC_CMD_STOP_TRANSMISSION) + xfertyp |= XFERTYP_CMDTYP_ABORT; +#endif return XFERTYP_CMD(cmd->cmdidx) | xfertyp; } @@ -178,14 +182,14 @@ static int esdhc_setup_data(struct mmc *mmc, struct mmc_data *data) wml_value = data->blocksize/4; if (data->flags & MMC_DATA_READ) { - if (wml_value > 0x10) - wml_value = 0x10; + if (wml_value > WML_RD_WML_MAX) + wml_value = WML_RD_WML_MAX_VAL; esdhc_clrsetbits32(®s->wml, WML_RD_WML_MASK, wml_value); esdhc_write32(®s->dsaddr, (u32)data->dest); } else { - if (wml_value > 0x80) - wml_value = 0x80; + if (wml_value > WML_WR_WML_MAX) + wml_value = WML_WR_WML_MAX_VAL; if ((esdhc_read32(®s->prsstat) & PRSSTAT_WPSPL) == 0) { printf("\nThe SD card is locked. Can not write to a locked card.\n\n"); return TIMEOUT; @@ -332,11 +336,11 @@ esdhc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) do { irqstat = esdhc_read32(®s->irqstat); - if (irqstat & DATA_ERR) - return COMM_ERR; - if (irqstat & IRQSTAT_DTOE) return TIMEOUT; + + if (irqstat & DATA_ERR) + return COMM_ERR; } while (!(irqstat & IRQSTAT_TC) && (esdhc_read32(®s->prsstat) & PRSSTAT_DLA)); #endif diff --git a/drivers/mmc/gen_atmel_mci.c b/drivers/mmc/gen_atmel_mci.c index 2984d64..6577925 100644 --- a/drivers/mmc/gen_atmel_mci.c +++ b/drivers/mmc/gen_atmel_mci.c @@ -348,6 +348,8 @@ int atmel_mci_init(void *regs) mmc->f_min = get_mci_clk_rate() / (2*256); mmc->f_max = get_mci_clk_rate() / (2*1); + mmc->b_max = 0; + mmc_register(mmc); return 0; diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index 6805b33..f6d31f5 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -30,9 +30,13 @@ #include <part.h> #include <malloc.h> #include <linux/list.h> -#include <mmc.h> #include <div64.h> +/* Set block count limit because of 16 bit register limit on some hardware*/ +#ifndef CONFIG_SYS_MMC_MAX_BLK_COUNT +#define CONFIG_SYS_MMC_MAX_BLK_COUNT 65535 +#endif + static struct list_head mmc_devices; static int cur_dev_num = -1; @@ -45,7 +49,100 @@ int board_mmc_getcd(u8 *cd, struct mmc *mmc)__attribute__((weak, int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) { +#ifdef CONFIG_MMC_TRACE + int ret; + int i; + u8 *ptr; + + printf("CMD_SEND:%d\n", cmd->cmdidx); + printf("\t\tARG\t\t\t 0x%08X\n", cmd->cmdarg); + printf("\t\tFLAG\t\t\t %d\n", cmd->flags); + ret = mmc->send_cmd(mmc, cmd, data); + switch (cmd->resp_type) { + case MMC_RSP_NONE: + printf("\t\tMMC_RSP_NONE\n"); + break; + case MMC_RSP_R1: + printf("\t\tMMC_RSP_R1,5,6,7 \t 0x%08X \n", + cmd->response[0]); + break; + case MMC_RSP_R1b: + printf("\t\tMMC_RSP_R1b\t\t 0x%08X \n", + cmd->response[0]); + break; + case MMC_RSP_R2: + printf("\t\tMMC_RSP_R2\t\t 0x%08X \n", + cmd->response[0]); + printf("\t\t \t\t 0x%08X \n", + cmd->response[1]); + printf("\t\t \t\t 0x%08X \n", + cmd->response[2]); + printf("\t\t \t\t 0x%08X \n", + cmd->response[3]); + printf("\n"); + printf("\t\t\t\t\tDUMPING DATA\n"); + for (i = 0; i < 4; i++) { + int j; + printf("\t\t\t\t\t%03d - ", i*4); + ptr = &cmd->response[i]; + ptr += 3; + for (j = 0; j < 4; j++) + printf("%02X ", *ptr--); + printf("\n"); + } + break; + case MMC_RSP_R3: + printf("\t\tMMC_RSP_R3,4\t\t 0x%08X \n", + cmd->response[0]); + break; + default: + printf("\t\tERROR MMC rsp not supported\n"); + break; + } + return ret; +#else return mmc->send_cmd(mmc, cmd, data); +#endif +} + +int mmc_send_status(struct mmc *mmc, int timeout) +{ + struct mmc_cmd cmd; + int err; +#ifdef CONFIG_MMC_TRACE + int status; +#endif + + cmd.cmdidx = MMC_CMD_SEND_STATUS; + cmd.resp_type = MMC_RSP_R1; + cmd.cmdarg = 0; + cmd.flags = 0; + + do { + err = mmc_send_cmd(mmc, &cmd, NULL); + if (err) + return err; + else if (cmd.response[0] & MMC_STATUS_RDY_FOR_DATA) + break; + + udelay(1000); + + if (cmd.response[0] & MMC_STATUS_MASK) { + printf("Status Error: 0x%08X\n", cmd.response[0]); + return COMM_ERR; + } + } while (timeout--); + +#ifdef CONFIG_MMC_TRACE + status = (cmd.response[0] & MMC_STATUS_CURR_STATE) >> 9; + printf("CURR STATE:%d\n", status); +#endif + if (!timeout) { + printf("Timeout waiting card ready\n"); + return TIMEOUT; + } + + return 0; } int mmc_set_blocklen(struct mmc *mmc, int len) @@ -82,6 +179,7 @@ mmc_write_blocks(struct mmc *mmc, ulong start, lbaint_t blkcnt, const void*src) { struct mmc_cmd cmd; struct mmc_data data; + int timeout = 1000; if ((start + blkcnt) > mmc->block_dev.lba) { printf("MMC: block number 0x%lx exceeds max(0x%lx)\n", @@ -112,7 +210,10 @@ mmc_write_blocks(struct mmc *mmc, ulong start, lbaint_t blkcnt, const void*src) return 0; } - if (blkcnt > 1) { + /* SPI multiblock writes terminate using a special + * token, not a STOP_TRANSMISSION request. + */ + if (!mmc_host_is_spi(mmc) && blkcnt > 1) { cmd.cmdidx = MMC_CMD_STOP_TRANSMISSION; cmd.cmdarg = 0; cmd.resp_type = MMC_RSP_R1b; @@ -121,6 +222,9 @@ mmc_write_blocks(struct mmc *mmc, ulong start, lbaint_t blkcnt, const void*src) printf("mmc fail to send stop cmd\n"); return 0; } + + /* Waiting for the ready status */ + mmc_send_status(mmc, timeout); } return blkcnt; @@ -139,11 +243,7 @@ mmc_bwrite(int dev_num, ulong start, lbaint_t blkcnt, const void*src) return 0; do { - /* - * The 65535 constraint comes from some hardware has - * only 16 bit width block number counter - */ - cur = (blocks_todo > 65535) ? 65535 : blocks_todo; + cur = (blocks_todo > mmc->b_max) ? mmc->b_max : blocks_todo; if(mmc_write_blocks(mmc, start, cur, src) != cur) return 0; blocks_todo -= cur; @@ -158,6 +258,7 @@ int mmc_read_blocks(struct mmc *mmc, void *dst, ulong start, lbaint_t blkcnt) { struct mmc_cmd cmd; struct mmc_data data; + int timeout = 1000; if (blkcnt > 1) cmd.cmdidx = MMC_CMD_READ_MULTIPLE_BLOCK; @@ -189,6 +290,9 @@ int mmc_read_blocks(struct mmc *mmc, void *dst, ulong start, lbaint_t blkcnt) printf("mmc fail to send stop cmd\n"); return 0; } + + /* Waiting for the ready status */ + mmc_send_status(mmc, timeout); } return blkcnt; @@ -215,11 +319,7 @@ static ulong mmc_bread(int dev_num, ulong start, lbaint_t blkcnt, void *dst) return 0; do { - /* - * The 65535 constraint comes from some hardware has - * only 16 bit width block number counter - */ - cur = (blocks_todo > 65535) ? 65535 : blocks_todo; + cur = (blocks_todo > mmc->b_max) ? mmc->b_max : blocks_todo; if(mmc_read_blocks(mmc, dst, start, cur) != cur) return 0; blocks_todo -= cur; @@ -280,7 +380,8 @@ sd_send_op_cond(struct mmc *mmc) * how to manage low voltages SD card is not yet * specified. */ - cmd.cmdarg = mmc->voltages & 0xff8000; + cmd.cmdarg = mmc_host_is_spi(mmc) ? 0 : + (mmc->voltages & 0xff8000); if (mmc->version == SD_VERSION_2) cmd.cmdarg |= OCR_HCS; @@ -299,6 +400,18 @@ sd_send_op_cond(struct mmc *mmc) if (mmc->version != SD_VERSION_2) mmc->version = SD_VERSION_1_0; + if (mmc_host_is_spi(mmc)) { /* read OCR for spi */ + cmd.cmdidx = MMC_CMD_SPI_READ_OCR; + cmd.resp_type = MMC_RSP_R3; + cmd.cmdarg = 0; + cmd.flags = 0; + + err = mmc_send_cmd(mmc, &cmd, NULL); + + if (err) + return err; + } + mmc->ocr = cmd.response[0]; mmc->high_capacity = ((mmc->ocr & OCR_HCS) == OCR_HCS); @@ -309,17 +422,33 @@ sd_send_op_cond(struct mmc *mmc) int mmc_send_op_cond(struct mmc *mmc) { - int timeout = 1000; + int timeout = 10000; struct mmc_cmd cmd; int err; /* Some cards seem to need this */ mmc_go_idle(mmc); + /* Asking to the card its capabilities */ + cmd.cmdidx = MMC_CMD_SEND_OP_COND; + cmd.resp_type = MMC_RSP_R3; + cmd.cmdarg = 0; + cmd.flags = 0; + + err = mmc_send_cmd(mmc, &cmd, NULL); + + if (err) + return err; + + udelay(1000); + do { cmd.cmdidx = MMC_CMD_SEND_OP_COND; cmd.resp_type = MMC_RSP_R3; - cmd.cmdarg = OCR_HCS | mmc->voltages; + cmd.cmdarg = (mmc_host_is_spi(mmc) ? 0 : + (mmc->voltages & + (cmd.response[0] & OCR_VOLTAGE_MASK)) | + (cmd.response[0] & OCR_ACCESS_MODE)); cmd.flags = 0; err = mmc_send_cmd(mmc, &cmd, NULL); @@ -333,6 +462,18 @@ int mmc_send_op_cond(struct mmc *mmc) if (timeout <= 0) return UNUSABLE_ERR; + if (mmc_host_is_spi(mmc)) { /* read OCR for spi */ + cmd.cmdidx = MMC_CMD_SPI_READ_OCR; + cmd.resp_type = MMC_RSP_R3; + cmd.cmdarg = 0; + cmd.flags = 0; + + err = mmc_send_cmd(mmc, &cmd, NULL); + + if (err) + return err; + } + mmc->version = MMC_VERSION_UNKNOWN; mmc->ocr = cmd.response[0]; @@ -369,15 +510,23 @@ int mmc_send_ext_csd(struct mmc *mmc, char *ext_csd) int mmc_switch(struct mmc *mmc, u8 set, u8 index, u8 value) { struct mmc_cmd cmd; + int timeout = 1000; + int ret; cmd.cmdidx = MMC_CMD_SWITCH; cmd.resp_type = MMC_RSP_R1b; cmd.cmdarg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) | - (index << 16) | - (value << 8); + (index << 16) | + (value << 8); cmd.flags = 0; - return mmc_send_cmd(mmc, &cmd, NULL); + ret = mmc_send_cmd(mmc, &cmd, NULL); + + /* Waiting for the ready status */ + mmc_send_status(mmc, timeout); + + return ret; + } int mmc_change_freq(struct mmc *mmc) @@ -388,6 +537,9 @@ int mmc_change_freq(struct mmc *mmc) mmc->card_caps = 0; + if (mmc_host_is_spi(mmc)) + return 0; + /* Only version 4 supports high-speed */ if (mmc->version < MMC_VERSION_4) return 0; @@ -399,9 +551,6 @@ int mmc_change_freq(struct mmc *mmc) if (err) return err; - if (ext_csd[212] || ext_csd[213] || ext_csd[214] || ext_csd[215]) - mmc->high_capacity = 1; - cardtype = ext_csd[196] & 0xf; err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_HS_TIMING, 1); @@ -461,6 +610,9 @@ int sd_change_freq(struct mmc *mmc) mmc->card_caps = 0; + if (mmc_host_is_spi(mmc)) + return 0; + /* Read the SCR to find out if this card supports higher speeds */ cmd.cmdidx = MMC_CMD_APP_CMD; cmd.resp_type = MMC_RSP_R1; @@ -512,6 +664,9 @@ retry_scr: break; } + if (mmc->scr[0] & SD_DATA_4BIT) + mmc->card_caps |= MMC_MODE_4BIT; + /* Version 1.0 doesn't support switching */ if (mmc->version == SD_VERSION_1_0) return 0; @@ -529,9 +684,6 @@ retry_scr: break; } - if (mmc->scr[0] & SD_DATA_4BIT) - mmc->card_caps |= MMC_MODE_4BIT; - /* If high-speed isn't supported, we return */ if (!(__be32_to_cpu(switch_status[3]) & SD_HIGHSPEED_SUPPORTED)) return 0; @@ -549,7 +701,7 @@ retry_scr: /* frequency bases */ /* divided by 10 to be nice to platforms without floating point */ -int fbase[] = { +static const int fbase[] = { 10000, 100000, 1000000, @@ -559,7 +711,7 @@ int fbase[] = { /* Multiplier values for TRAN_SPEED. Multiplied by 10 to be nice * to platforms without floating point. */ -int multipliers[] = { +static const int multipliers[] = { 0, /* reserved */ 10, 12, @@ -610,9 +762,24 @@ int mmc_startup(struct mmc *mmc) u64 cmult, csize; struct mmc_cmd cmd; char ext_csd[512]; + int timeout = 1000; + +#ifdef CONFIG_MMC_SPI_CRC_ON + if (mmc_host_is_spi(mmc)) { /* enable CRC check for spi */ + cmd.cmdidx = MMC_CMD_SPI_CRC_ON_OFF; + cmd.resp_type = MMC_RSP_R1; + cmd.cmdarg = 1; + cmd.flags = 0; + err = mmc_send_cmd(mmc, &cmd, NULL); + + if (err) + return err; + } +#endif /* Put the Card in Identify Mode */ - cmd.cmdidx = MMC_CMD_ALL_SEND_CID; + cmd.cmdidx = mmc_host_is_spi(mmc) ? MMC_CMD_SEND_CID : + MMC_CMD_ALL_SEND_CID; /* cmd not supported in spi */ cmd.resp_type = MMC_RSP_R2; cmd.cmdarg = 0; cmd.flags = 0; @@ -629,18 +796,20 @@ int mmc_startup(struct mmc *mmc) * For SD cards, get the Relatvie Address. * This also puts the cards into Standby State */ - cmd.cmdidx = SD_CMD_SEND_RELATIVE_ADDR; - cmd.cmdarg = mmc->rca << 16; - cmd.resp_type = MMC_RSP_R6; - cmd.flags = 0; + if (!mmc_host_is_spi(mmc)) { /* cmd not supported in spi */ + cmd.cmdidx = SD_CMD_SEND_RELATIVE_ADDR; + cmd.cmdarg = mmc->rca << 16; + cmd.resp_type = MMC_RSP_R6; + cmd.flags = 0; - err = mmc_send_cmd(mmc, &cmd, NULL); + err = mmc_send_cmd(mmc, &cmd, NULL); - if (err) - return err; + if (err) + return err; - if (IS_SD(mmc)) - mmc->rca = (cmd.response[0] >> 16) & 0xffff; + if (IS_SD(mmc)) + mmc->rca = (cmd.response[0] >> 16) & 0xffff; + } /* Get the Card-Specific Data */ cmd.cmdidx = MMC_CMD_SEND_CSD; @@ -650,6 +819,9 @@ int mmc_startup(struct mmc *mmc) err = mmc_send_cmd(mmc, &cmd, NULL); + /* Waiting for the ready status */ + mmc_send_status(mmc, timeout); + if (err) return err; @@ -716,14 +888,16 @@ int mmc_startup(struct mmc *mmc) mmc->write_bl_len = 512; /* Select the card, and put it into Transfer Mode */ - cmd.cmdidx = MMC_CMD_SELECT_CARD; - cmd.resp_type = MMC_RSP_R1b; - cmd.cmdarg = mmc->rca << 16; - cmd.flags = 0; - err = mmc_send_cmd(mmc, &cmd, NULL); + if (!mmc_host_is_spi(mmc)) { /* cmd not supported in spi */ + cmd.cmdidx = MMC_CMD_SELECT_CARD; + cmd.resp_type = MMC_RSP_R1b; + cmd.cmdarg = mmc->rca << 16; + cmd.flags = 0; + err = mmc_send_cmd(mmc, &cmd, NULL); - if (err) - return err; + if (err) + return err; + } if (!IS_SD(mmc) && (mmc->version >= MMC_VERSION_4)) { /* check ext_csd version and capacity */ @@ -853,6 +1027,8 @@ int mmc_register(struct mmc *mmc) mmc->block_dev.removable = 1; mmc->block_dev.block_read = mmc_bread; mmc->block_dev.block_write = mmc_bwrite; + if (!mmc->b_max) + mmc->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT; INIT_LIST_HEAD (&mmc->link); diff --git a/drivers/mmc/mmc_spi.c b/drivers/mmc/mmc_spi.c new file mode 100644 index 0000000..dc7574c --- /dev/null +++ b/drivers/mmc/mmc_spi.c @@ -0,0 +1,280 @@ +/* + * generic mmc spi driver + * + * Copyright (C) 2010 Thomas Chou <thomas@wytron.com.tw> + * Licensed under the GPL-2 or later. + */ +#include <common.h> +#include <malloc.h> +#include <part.h> +#include <mmc.h> +#include <spi.h> +#include <crc.h> +#include <linux/crc7.h> +#include <linux/byteorder/swab.h> + +/* MMC/SD in SPI mode reports R1 status always */ +#define R1_SPI_IDLE (1 << 0) +#define R1_SPI_ERASE_RESET (1 << 1) +#define R1_SPI_ILLEGAL_COMMAND (1 << 2) +#define R1_SPI_COM_CRC (1 << 3) +#define R1_SPI_ERASE_SEQ (1 << 4) +#define R1_SPI_ADDRESS (1 << 5) +#define R1_SPI_PARAMETER (1 << 6) +/* R1 bit 7 is always zero, reuse this bit for error */ +#define R1_SPI_ERROR (1 << 7) + +/* Response tokens used to ack each block written: */ +#define SPI_MMC_RESPONSE_CODE(x) ((x) & 0x1f) +#define SPI_RESPONSE_ACCEPTED ((2 << 1)|1) +#define SPI_RESPONSE_CRC_ERR ((5 << 1)|1) +#define SPI_RESPONSE_WRITE_ERR ((6 << 1)|1) + +/* Read and write blocks start with these tokens and end with crc; + * on error, read tokens act like a subset of R2_SPI_* values. + */ +#define SPI_TOKEN_SINGLE 0xfe /* single block r/w, multiblock read */ +#define SPI_TOKEN_MULTI_WRITE 0xfc /* multiblock write */ +#define SPI_TOKEN_STOP_TRAN 0xfd /* terminate multiblock write */ + +/* MMC SPI commands start with a start bit "0" and a transmit bit "1" */ +#define MMC_SPI_CMD(x) (0x40 | (x & 0x3f)) + +/* bus capability */ +#define MMC_SPI_VOLTAGE (MMC_VDD_32_33 | MMC_VDD_33_34) +#define MMC_SPI_MIN_CLOCK 400000 /* 400KHz to meet MMC spec */ + +/* timeout value */ +#define CTOUT 8 +#define RTOUT 3000000 /* 1 sec */ +#define WTOUT 3000000 /* 1 sec */ + +static uint mmc_spi_sendcmd(struct mmc *mmc, ushort cmdidx, u32 cmdarg) +{ + struct spi_slave *spi = mmc->priv; + u8 cmdo[7]; + u8 r1; + int i; + cmdo[0] = 0xff; + cmdo[1] = MMC_SPI_CMD(cmdidx); + cmdo[2] = cmdarg >> 24; + cmdo[3] = cmdarg >> 16; + cmdo[4] = cmdarg >> 8; + cmdo[5] = cmdarg; + cmdo[6] = (crc7(0, &cmdo[1], 5) << 1) | 0x01; + spi_xfer(spi, sizeof(cmdo) * 8, cmdo, NULL, 0); + for (i = 0; i < CTOUT; i++) { + spi_xfer(spi, 1 * 8, NULL, &r1, 0); + if (i && (r1 & 0x80) == 0) /* r1 response */ + break; + } + debug("%s:cmd%d resp%d %x\n", __func__, cmdidx, i, r1); + return r1; +} + +static uint mmc_spi_readdata(struct mmc *mmc, void *xbuf, + u32 bcnt, u32 bsize) +{ + struct spi_slave *spi = mmc->priv; + u8 *buf = xbuf; + u8 r1; + u16 crc; + int i; + while (bcnt--) { + for (i = 0; i < RTOUT; i++) { + spi_xfer(spi, 1 * 8, NULL, &r1, 0); + if (r1 != 0xff) /* data token */ + break; + } + debug("%s:tok%d %x\n", __func__, i, r1); + if (r1 == SPI_TOKEN_SINGLE) { + spi_xfer(spi, bsize * 8, NULL, buf, 0); + spi_xfer(spi, 2 * 8, NULL, &crc, 0); +#ifdef CONFIG_MMC_SPI_CRC_ON + if (swab16(cyg_crc16(buf, bsize)) != crc) { + debug("%s: CRC error\n", mmc->name); + r1 = R1_SPI_COM_CRC; + break; + } +#endif + r1 = 0; + } else { + r1 = R1_SPI_ERROR; + break; + } + buf += bsize; + } + return r1; +} + +static uint mmc_spi_writedata(struct mmc *mmc, const void *xbuf, + u32 bcnt, u32 bsize, int multi) +{ + struct spi_slave *spi = mmc->priv; + const u8 *buf = xbuf; + u8 r1; + u16 crc; + u8 tok[2]; + int i; + tok[0] = 0xff; + tok[1] = multi ? SPI_TOKEN_MULTI_WRITE : SPI_TOKEN_SINGLE; + while (bcnt--) { +#ifdef CONFIG_MMC_SPI_CRC_ON + crc = swab16(cyg_crc16((u8 *)buf, bsize)); +#endif + spi_xfer(spi, 2 * 8, tok, NULL, 0); + spi_xfer(spi, bsize * 8, buf, NULL, 0); + spi_xfer(spi, 2 * 8, &crc, NULL, 0); + for (i = 0; i < CTOUT; i++) { + spi_xfer(spi, 1 * 8, NULL, &r1, 0); + if ((r1 & 0x10) == 0) /* response token */ + break; + } + debug("%s:tok%d %x\n", __func__, i, r1); + if (SPI_MMC_RESPONSE_CODE(r1) == SPI_RESPONSE_ACCEPTED) { + for (i = 0; i < WTOUT; i++) { /* wait busy */ + spi_xfer(spi, 1 * 8, NULL, &r1, 0); + if (i && r1 == 0xff) { + r1 = 0; + break; + } + } + if (i == WTOUT) { + debug("%s:wtout %x\n", __func__, r1); + r1 = R1_SPI_ERROR; + break; + } + } else { + debug("%s: err %x\n", __func__, r1); + r1 = R1_SPI_COM_CRC; + break; + } + buf += bsize; + } + if (multi && bcnt == -1) { /* stop multi write */ + tok[1] = SPI_TOKEN_STOP_TRAN; + spi_xfer(spi, 2 * 8, tok, NULL, 0); + for (i = 0; i < WTOUT; i++) { /* wait busy */ + spi_xfer(spi, 1 * 8, NULL, &r1, 0); + if (i && r1 == 0xff) { + r1 = 0; + break; + } + } + if (i == WTOUT) { + debug("%s:wstop %x\n", __func__, r1); + r1 = R1_SPI_ERROR; + } + } + return r1; +} + +static int mmc_spi_request(struct mmc *mmc, struct mmc_cmd *cmd, + struct mmc_data *data) +{ + struct spi_slave *spi = mmc->priv; + u8 r1; + int i; + int ret = 0; + debug("%s:cmd%d %x %x %x\n", __func__, + cmd->cmdidx, cmd->resp_type, cmd->cmdarg, cmd->flags); + spi_claim_bus(spi); + spi_cs_activate(spi); + r1 = mmc_spi_sendcmd(mmc, cmd->cmdidx, cmd->cmdarg); + if (r1 == 0xff) { /* no response */ + ret = NO_CARD_ERR; + goto done; + } else if (r1 & R1_SPI_COM_CRC) { + ret = COMM_ERR; + goto done; + } else if (r1 & ~R1_SPI_IDLE) { /* other errors */ + ret = TIMEOUT; + goto done; + } else if (cmd->resp_type == MMC_RSP_R2) { + r1 = mmc_spi_readdata(mmc, cmd->response, 1, 16); + for (i = 0; i < 4; i++) + cmd->response[i] = swab32(cmd->response[i]); + debug("r128 %x %x %x %x\n", cmd->response[0], cmd->response[1], + cmd->response[2], cmd->response[3]); + } else if (!data) { + switch (cmd->cmdidx) { + case SD_CMD_APP_SEND_OP_COND: + case MMC_CMD_SEND_OP_COND: + cmd->response[0] = (r1 & R1_SPI_IDLE) ? 0 : OCR_BUSY; + break; + case SD_CMD_SEND_IF_COND: + case MMC_CMD_SPI_READ_OCR: + spi_xfer(spi, 4 * 8, NULL, cmd->response, 0); + cmd->response[0] = swab32(cmd->response[0]); + debug("r32 %x\n", cmd->response[0]); + break; + } + } else { + debug("%s:data %x %x %x\n", __func__, + data->flags, data->blocks, data->blocksize); + if (data->flags == MMC_DATA_READ) + r1 = mmc_spi_readdata(mmc, data->dest, + data->blocks, data->blocksize); + else if (data->flags == MMC_DATA_WRITE) + r1 = mmc_spi_writedata(mmc, data->src, + data->blocks, data->blocksize, + (cmd->cmdidx == MMC_CMD_WRITE_MULTIPLE_BLOCK)); + if (r1 & R1_SPI_COM_CRC) + ret = COMM_ERR; + else if (r1) /* other errors */ + ret = TIMEOUT; + } +done: + spi_cs_deactivate(spi); + spi_release_bus(spi); + return ret; +} + +static void mmc_spi_set_ios(struct mmc *mmc) +{ + struct spi_slave *spi = mmc->priv; + debug("%s: clock %u\n", __func__, mmc->clock); + if (mmc->clock) + spi_set_speed(spi, mmc->clock); +} + +static int mmc_spi_init_p(struct mmc *mmc) +{ + struct spi_slave *spi = mmc->priv; + mmc->clock = 0; + spi_set_speed(spi, MMC_SPI_MIN_CLOCK); + spi_claim_bus(spi); + /* cs deactivated for 100+ clock */ + spi_xfer(spi, 18 * 8, NULL, NULL, 0); + spi_release_bus(spi); + return 0; +} + +struct mmc *mmc_spi_init(uint bus, uint cs, uint speed, uint mode) +{ + struct mmc *mmc; + + mmc = malloc(sizeof(*mmc)); + if (!mmc) + return NULL; + memset(mmc, 0, sizeof(*mmc)); + mmc->priv = spi_setup_slave(bus, cs, speed, mode); + if (!mmc->priv) { + free(mmc); + return NULL; + } + sprintf(mmc->name, "MMC_SPI"); + mmc->send_cmd = mmc_spi_request; + mmc->set_ios = mmc_spi_set_ios; + mmc->init = mmc_spi_init_p; + mmc->host_caps = MMC_MODE_SPI; + + mmc->voltages = MMC_SPI_VOLTAGE; + mmc->f_max = speed; + mmc->f_min = MMC_SPI_MIN_CLOCK; + mmc->block_dev.part_type = PART_TYPE_DOS; + + mmc_register(mmc); + + return mmc; +} diff --git a/drivers/mmc/mxcmmc.c b/drivers/mmc/mxcmmc.c index 5963953..ab1fc82 100644 --- a/drivers/mmc/mxcmmc.c +++ b/drivers/mmc/mxcmmc.c @@ -511,6 +511,8 @@ static int mxcmci_initialize(bd_t *bis) mmc->f_min = imx_get_perclk2() >> 7; mmc->f_max = imx_get_perclk2() >> 1; + mmc->b_max = 0; + mmc_register(mmc); return 0; diff --git a/drivers/mmc/omap_hsmmc.c b/drivers/mmc/omap_hsmmc.c index 6f2280a..957b987 100644 --- a/drivers/mmc/omap_hsmmc.c +++ b/drivers/mmc/omap_hsmmc.c @@ -465,6 +465,16 @@ int omap_mmc_init(int dev_index) mmc->f_min = 400000; mmc->f_max = 52000000; + mmc->b_max = 0; + +#if defined(CONFIG_OMAP34XX) + /* + * Silicon revs 2.1 and older do not support multiblock transfers. + */ + if ((get_cpu_family() == CPU_OMAP34XX) && (get_cpu_rev() <= CPU_3XX_ES21)) + mmc->b_max = 1; +#endif + mmc_register(mmc); return 0; diff --git a/drivers/mmc/s5p_mmc.c b/drivers/mmc/s5p_mmc.c index 0323800..668c28b 100644 --- a/drivers/mmc/s5p_mmc.c +++ b/drivers/mmc/s5p_mmc.c @@ -466,6 +466,7 @@ static int s5p_mmc_initialize(int dev_index, int bus_width) mmc_host[dev_index].clock = 0; mmc_host[dev_index].reg = s5p_get_base_mmc(dev_index); + mmc->m_bmax = 0; mmc_register(mmc); return 0; diff --git a/drivers/mtd/Makefile b/drivers/mtd/Makefile index 999431c..5a5ecdf 100644 --- a/drivers/mtd/Makefile +++ b/drivers/mtd/Makefile @@ -32,6 +32,7 @@ COBJS-$(CONFIG_HAS_DATAFLASH) += at45.o COBJS-$(CONFIG_FLASH_CFI_DRIVER) += cfi_flash.o COBJS-$(CONFIG_FLASH_CFI_MTD) += cfi_mtd.o COBJS-$(CONFIG_HAS_DATAFLASH) += dataflash.o +COBJS-$(CONFIG_FTSMC020) += ftsmc020.o COBJS-$(CONFIG_FLASH_CFI_LEGACY) += jedec_flash.o COBJS-$(CONFIG_MW_EEPROM) += mw_eeprom.o COBJS-$(CONFIG_SPEARSMI) += spr_smi.o diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c index 0909fe7..6039e1f 100644 --- a/drivers/mtd/cfi_flash.c +++ b/drivers/mtd/cfi_flash.c @@ -581,6 +581,7 @@ static int flash_status_check (flash_info_t * info, flash_sect_t sector, prompt, info->start[sector], flash_read_long (info, sector, 0)); flash_write_cmd (info, sector, 0, info->cmd_reset); + udelay(1); return ERR_TIMOUT; } udelay (1); /* also triggers watchdog */ @@ -628,6 +629,7 @@ static int flash_full_status_check (flash_info_t * info, flash_sect_t sector, puts ("Vpp Low Error.\n"); } flash_write_cmd (info, sector, 0, info->cmd_reset); + udelay(1); break; default: break; @@ -1202,8 +1204,9 @@ void flash_print_info (flash_info_t * info) info->manufacturer_id); printf (info->chipwidth == FLASH_CFI_16BIT ? "%04X" : "%02X", info->device_id); - if (info->device_id == 0x7E) { - printf("%04X", info->device_id2); + if ((info->device_id & 0xff) == 0x7E) { + printf(info->chipwidth == FLASH_CFI_16BIT ? "%04X" : "%02X", + info->device_id2); } printf ("\n Erase timeout: %ld ms, write timeout: %ld ms\n", info->erase_blk_tout, @@ -1490,6 +1493,7 @@ void flash_read_user_serial (flash_info_t * info, void *buffer, int offset, flash_write_cmd (info, 0, 0, FLASH_CMD_READ_ID); memcpy (dst, src + offset, len); flash_write_cmd (info, 0, 0, info->cmd_reset); + udelay(1); flash_unmap(info, 0, FLASH_OFFSET_USER_PROTECTION, src); } @@ -1505,6 +1509,7 @@ void flash_read_factory_serial (flash_info_t * info, void *buffer, int offset, flash_write_cmd (info, 0, 0, FLASH_CMD_READ_ID); memcpy (buffer, src + offset, len); flash_write_cmd (info, 0, 0, info->cmd_reset); + udelay(1); flash_unmap(info, 0, FLASH_OFFSET_INTEL_PROTECTION, src); } @@ -1536,6 +1541,7 @@ static void cfi_reverse_geometry(struct cfi_qry *qry) static void cmdset_intel_read_jedec_ids(flash_info_t *info) { flash_write_cmd(info, 0, 0, FLASH_CMD_RESET); + udelay(1); flash_write_cmd(info, 0, 0, FLASH_CMD_READ_ID); udelay(1000); /* some flash are slow to respond */ info->manufacturer_id = flash_read_uchar (info, @@ -1599,11 +1605,20 @@ static void cmdset_amd_read_jedec_ids(flash_info_t *info) case FLASH_CFI_16BIT: info->device_id = flash_read_word (info, FLASH_OFFSET_DEVICE_ID); + if ((info->device_id & 0xff) == 0x7E) { + /* AMD 3-byte (expanded) device ids */ + info->device_id2 = flash_read_uchar (info, + FLASH_OFFSET_DEVICE_ID2); + info->device_id2 <<= 8; + info->device_id2 |= flash_read_uchar (info, + FLASH_OFFSET_DEVICE_ID3); + } break; default: break; } flash_write_cmd(info, 0, 0, AMD_CMD_RESET); + udelay(1); } static int cmdset_amd_init(flash_info_t *info, struct cfi_qry *qry) @@ -1730,6 +1745,7 @@ void __flash_cmd_reset(flash_info_t *info) * that AMD flash roms ignore the Intel command. */ flash_write_cmd(info, 0, 0, AMD_CMD_RESET); + udelay(1); flash_write_cmd(info, 0, 0, FLASH_CMD_RESET); } void flash_cmd_reset(flash_info_t *info) @@ -1852,9 +1868,10 @@ static void flash_fixup_stm(flash_info_t *info, struct cfi_qry *qry) if (qry->num_erase_regions > 1) { /* reverse geometry if top boot part */ if (info->cfi_version < 0x3131) { - /* CFI < 1.1, guess by device id (M29W320{DT,ET} only) */ - if (info->device_id == 0x22CA || - info->device_id == 0x2256) { + /* CFI < 1.1, guess by device id */ + if (info->device_id == 0x22CA || /* M29W320DT */ + info->device_id == 0x2256 || /* M29W320ET */ + info->device_id == 0x22D7) { /* M29W800DT */ cfi_reverse_geometry(qry); } } @@ -1929,7 +1946,8 @@ ulong flash_get_size (phys_addr_t base, int banknum) /* Do manufacturer-specific fixups */ switch (info->manufacturer_id) { - case 0x0001: + case 0x0001: /* AMD */ + case 0x0037: /* AMIC */ flash_fixup_amd(info, &qry); break; case 0x001f: @@ -2085,17 +2103,59 @@ static void cfi_flash_set_config_reg(u32 base, u16 val) /*----------------------------------------------------------------------- */ -unsigned long flash_init (void) + +void flash_protect_default(void) { - unsigned long size = 0; - int i; #if defined(CONFIG_SYS_FLASH_AUTOPROTECT_LIST) + int i; struct apl_s { ulong start; ulong size; } apl[] = CONFIG_SYS_FLASH_AUTOPROTECT_LIST; #endif + /* Monitor protection ON by default */ +#if (CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE) && \ + (!defined(CONFIG_MONITOR_IS_IN_RAM)) + flash_protect(FLAG_PROTECT_SET, + CONFIG_SYS_MONITOR_BASE, + CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1, + flash_get_info(CONFIG_SYS_MONITOR_BASE)); +#endif + + /* Environment protection ON by default */ +#ifdef CONFIG_ENV_IS_IN_FLASH + flash_protect(FLAG_PROTECT_SET, + CONFIG_ENV_ADDR, + CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1, + flash_get_info(CONFIG_ENV_ADDR)); +#endif + + /* Redundant environment protection ON by default */ +#ifdef CONFIG_ENV_ADDR_REDUND + flash_protect(FLAG_PROTECT_SET, + CONFIG_ENV_ADDR_REDUND, + CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1, + flash_get_info(CONFIG_ENV_ADDR_REDUND)); +#endif + +#if defined(CONFIG_SYS_FLASH_AUTOPROTECT_LIST) + for (i = 0; i < (sizeof(apl) / sizeof(struct apl_s)); i++) { + debug("autoprotecting from %08x to %08x\n", + apl[i].start, apl[i].start + apl[i].size - 1); + flash_protect(FLAG_PROTECT_SET, + apl[i].start, + apl[i].start + apl[i].size - 1, + flash_get_info(apl[i].start)); + } +#endif +} + +unsigned long flash_init (void) +{ + unsigned long size = 0; + int i; + #ifdef CONFIG_SYS_FLASH_PROTECTION /* read environment from EEPROM */ char s[64]; @@ -2171,42 +2231,7 @@ unsigned long flash_init (void) #endif /* CONFIG_SYS_FLASH_PROTECTION */ } - /* Monitor protection ON by default */ -#if (CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE) && \ - (!defined(CONFIG_MONITOR_IS_IN_RAM)) - flash_protect (FLAG_PROTECT_SET, - CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1, - flash_get_info(CONFIG_SYS_MONITOR_BASE)); -#endif - - /* Environment protection ON by default */ -#ifdef CONFIG_ENV_IS_IN_FLASH - flash_protect (FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1, - flash_get_info(CONFIG_ENV_ADDR)); -#endif - - /* Redundant environment protection ON by default */ -#ifdef CONFIG_ENV_ADDR_REDUND - flash_protect (FLAG_PROTECT_SET, - CONFIG_ENV_ADDR_REDUND, - CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1, - flash_get_info(CONFIG_ENV_ADDR_REDUND)); -#endif - -#if defined(CONFIG_SYS_FLASH_AUTOPROTECT_LIST) - for (i = 0; i < (sizeof(apl) / sizeof(struct apl_s)); i++) { - debug("autoprotecting from %08x to %08x\n", - apl[i].start, apl[i].start + apl[i].size - 1); - flash_protect (FLAG_PROTECT_SET, - apl[i].start, - apl[i].start + apl[i].size - 1, - flash_get_info(apl[i].start)); - } -#endif - + flash_protect_default(); #ifdef CONFIG_FLASH_CFI_MTD cfi_mtd_init(); #endif diff --git a/arch/arm/cpu/arm920t/a320/ftsmc020.c b/drivers/mtd/ftsmc020.c index 7646537..b027685 100644 --- a/arch/arm/cpu/arm920t/a320/ftsmc020.c +++ b/drivers/mtd/ftsmc020.c @@ -20,7 +20,7 @@ #include <config.h> #include <common.h> #include <asm/io.h> -#include <asm/arch/ftsmc020.h> +#include <faraday/ftsmc020.h> struct ftsmc020_config { unsigned int config; diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index fa286a8..52f8575 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -2461,20 +2461,24 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, /* check version */ val = le16_to_cpu(p->revision); - if (val == 1 || val > (1 << 4)) { - printk(KERN_INFO "%s: unsupported ONFI " - "version: %d\n", __func__, val); - return 0; - } - - if (val & (1 << 4)) + if (val & (1 << 5)) + chip->onfi_version = 23; + else if (val & (1 << 4)) chip->onfi_version = 22; else if (val & (1 << 3)) chip->onfi_version = 21; else if (val & (1 << 2)) chip->onfi_version = 20; - else + else if (val & (1 << 1)) chip->onfi_version = 10; + else + chip->onfi_version = 0; + + if (!chip->onfi_version) { + printk(KERN_INFO "%s: unsupported ONFI " + "version: %d\n", __func__, val); + return 0; + } if (!mtd->name) mtd->name = p->model; @@ -2482,7 +2486,7 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, mtd->writesize = le32_to_cpu(p->byte_per_page); mtd->erasesize = le32_to_cpu(p->pages_per_block) * mtd->writesize; mtd->oobsize = le16_to_cpu(p->spare_bytes_per_page); - chip->chipsize = le32_to_cpu(p->blocks_per_lun) * mtd->erasesize; + chip->chipsize = (uint64_t)le32_to_cpu(p->blocks_per_lun) * mtd->erasesize; *busw = 0; if (le16_to_cpu(p->features) & 1) *busw = NAND_BUSWIDTH_16; diff --git a/drivers/mtd/spi/atmel.c b/drivers/mtd/spi/atmel.c index 8d02169..1ecece0 100644 --- a/drivers/mtd/spi/atmel.c +++ b/drivers/mtd/spi/atmel.c @@ -170,20 +170,6 @@ static void at45_build_address(struct atmel_spi_flash *asf, u8 *cmd, u32 offset) cmd[2] = byte_addr; } -static int dataflash_read_fast_p2(struct spi_flash *flash, - u32 offset, size_t len, void *buf) -{ - u8 cmd[5]; - - cmd[0] = CMD_READ_ARRAY_FAST; - cmd[1] = offset >> 16; - cmd[2] = offset >> 8; - cmd[3] = offset; - cmd[4] = 0x00; - - return spi_flash_read_common(flash, cmd, sizeof(cmd), buf, len); -} - static int dataflash_read_fast_at45(struct spi_flash *flash, u32 offset, size_t len, void *buf) { @@ -342,7 +328,7 @@ out: /* * TODO: the two erase funcs (_p2/_at45) should get unified ... */ -int dataflash_erase_p2(struct spi_flash *flash, u32 offset, size_t len) +static int dataflash_erase_p2(struct spi_flash *flash, u32 offset, size_t len) { struct atmel_spi_flash *asf = to_atmel_spi_flash(flash); unsigned long page_size; @@ -401,7 +387,7 @@ out: return ret; } -int dataflash_erase_at45(struct spi_flash *flash, u32 offset, size_t len) +static int dataflash_erase_at45(struct spi_flash *flash, u32 offset, size_t len) { struct atmel_spi_flash *asf = to_atmel_spi_flash(flash); unsigned long page_addr; @@ -519,7 +505,7 @@ struct spi_flash *spi_flash_probe_atmel(struct spi_slave *spi, u8 *idcode) asf->flash.erase = dataflash_erase_at45; page_size += 1 << (params->l2_page_size - 5); } else { - asf->flash.read = dataflash_read_fast_p2; + asf->flash.read = spi_flash_cmd_read_fast; asf->flash.write = dataflash_write_p2; asf->flash.erase = dataflash_erase_p2; } @@ -528,7 +514,7 @@ struct spi_flash *spi_flash_probe_atmel(struct spi_slave *spi, u8 *idcode) case DF_FAMILY_AT26F: case DF_FAMILY_AT26DF: - asf->flash.read = dataflash_read_fast_p2; + asf->flash.read = spi_flash_cmd_read_fast; break; default: @@ -536,14 +522,11 @@ struct spi_flash *spi_flash_probe_atmel(struct spi_slave *spi, u8 *idcode) goto err; } + asf->flash.sector_size = page_size; asf->flash.size = page_size * params->pages_per_block * params->blocks_per_sector * params->nr_sectors; - printf("SF: Detected %s with page size %u, total ", - params->name, page_size); - print_size(asf->flash.size, "\n"); - return &asf->flash; err: diff --git a/drivers/mtd/spi/eon.c b/drivers/mtd/spi/eon.c index 02c3bb9..e3de3aa 100644 --- a/drivers/mtd/spi/eon.c +++ b/drivers/mtd/spi/eon.c @@ -25,8 +25,6 @@ #define EON_ID_EN25Q128 0x18 -#define EON_SR_WIP (1 << 0) /* Write-in-Progress */ - struct eon_spi_flash_params { u8 idcode1; u16 page_size; @@ -58,60 +56,6 @@ static const struct eon_spi_flash_params eon_spi_flash_table[] = { }, }; -static int eon_wait_ready(struct spi_flash *flash, unsigned long timeout) -{ - struct spi_slave *spi = flash->spi; - unsigned long timebase; - int ret; - u8 cmd = CMD_EN25Q128_RDSR; - u8 status; - - ret = spi_xfer(spi, 8, &cmd, NULL, SPI_XFER_BEGIN); - if (ret) { - debug("SF: Failed to send command %02x: %d\n", cmd, ret); - return ret; - } - - timebase = get_timer(0); - do { - ret = spi_xfer(spi, 8, NULL, &status, 0); - if (ret) - return -1; - - if ((status & EON_SR_WIP) == 0) - break; - - } while (get_timer(timebase) < timeout); - - spi_xfer(spi, 0, NULL, NULL, SPI_XFER_END); - - if ((status & EON_SR_WIP) == 0) - return 0; - - /* Timed out */ - return -1; -} - -static int eon_read_fast(struct spi_flash *flash, - u32 offset, size_t len, void *buf) -{ - struct eon_spi_flash *eon = to_eon_spi_flash(flash); - unsigned long page_addr; - unsigned long page_size; - u8 cmd[5]; - - page_size = eon->params->page_size; - page_addr = offset / page_size; - - cmd[0] = CMD_READ_ARRAY_FAST; - cmd[1] = page_addr >> 8; - cmd[2] = page_addr; - cmd[3] = offset % page_size; - cmd[4] = 0x00; - - return spi_flash_read_common(flash, cmd, sizeof(cmd), buf, len); -} - static int eon_write(struct spi_flash *flash, u32 offset, size_t len, const void *buf) { @@ -160,11 +104,9 @@ static int eon_write(struct spi_flash *flash, break; } - ret = eon_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT); - if (ret < 0) { - debug("SF: EON page programming timed out\n"); + ret = spi_flash_cmd_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT); + if (ret) break; - } page_addr++; byte_addr = 0; @@ -177,62 +119,9 @@ static int eon_write(struct spi_flash *flash, return ret; } -int eon_erase(struct spi_flash *flash, u32 offset, size_t len) +static int eon_erase(struct spi_flash *flash, u32 offset, size_t len) { - /* block erase */ - struct eon_spi_flash *eon = to_eon_spi_flash(flash); - unsigned long block_size; - size_t actual; - int ret; - u8 cmd[4]; - - - block_size = eon->params->page_size * eon->params->pages_per_sector - * eon->params->sectors_per_block; - - if (offset % block_size || len % block_size) { - debug("SF: Erase offset/length not multiple of block size\n"); - return -1; - } - - len /= block_size; - cmd[0] = CMD_EN25Q128_BE; - cmd[2] = 0x00; - cmd[3] = 0x00; - - ret = spi_claim_bus(flash->spi); - if (ret) { - debug("SF: Unable to claim SPI bus\n"); - return ret; - } - - ret = 0; - for (actual = 0; actual < len; actual++) { - cmd[1] = (offset / block_size) + actual; - ret = spi_flash_cmd(flash->spi, CMD_EN25Q128_WREN, NULL, 0); - if (ret < 0) { - debug("SF: Enabling Write failed\n"); - break; - } - - ret = spi_flash_cmd_write(flash->spi, cmd, 4, NULL, 0); - if (ret < 0) { - debug("SF: EON page erase failed\n"); - break; - } - - ret = eon_wait_ready(flash, SPI_FLASH_PAGE_ERASE_TIMEOUT); - if (ret < 0) { - debug("SF: EON page erase timed out\n"); - break; - } - } - - debug("SF: EON: Successfully erased %u bytes @ 0x%x\n", - len * block_size, offset); - - spi_release_bus(flash->spi); - return ret; + return spi_flash_cmd_erase(flash, CMD_EN25Q128_BE, offset, len); } struct spi_flash *spi_flash_probe_eon(struct spi_slave *spi, u8 *idcode) @@ -264,12 +153,11 @@ struct spi_flash *spi_flash_probe_eon(struct spi_slave *spi, u8 *idcode) eon->flash.write = eon_write; eon->flash.erase = eon_erase; - eon->flash.read = eon_read_fast; + eon->flash.read = spi_flash_cmd_read_fast; + eon->flash.sector_size = params->page_size * params->pages_per_sector + * params->sectors_per_block; eon->flash.size = params->page_size * params->pages_per_sector * params->nr_sectors; - debug("SF: Detected %s with page size %u, total %u bytes\n", - params->name, params->page_size, eon->flash.size); - return &eon->flash; } diff --git a/drivers/mtd/spi/macronix.c b/drivers/mtd/spi/macronix.c index 76d5284..ff66f2a 100644 --- a/drivers/mtd/spi/macronix.c +++ b/drivers/mtd/spi/macronix.c @@ -49,8 +49,6 @@ #define CMD_MX25XX_DP 0xb9 /* Deep Power-down */ #define CMD_MX25XX_RES 0xab /* Release from DP, and Read Signature */ -#define MACRONIX_SR_WIP (1 << 0) /* Write-in-Progress */ - struct macronix_spi_flash_params { u16 idcode; u16 page_size; @@ -114,60 +112,6 @@ static const struct macronix_spi_flash_params macronix_spi_flash_table[] = { }, }; -static int macronix_wait_ready(struct spi_flash *flash, unsigned long timeout) -{ - struct spi_slave *spi = flash->spi; - unsigned long timebase; - int ret; - u8 status; - u8 cmd = CMD_MX25XX_RDSR; - - ret = spi_xfer(spi, 8, &cmd, NULL, SPI_XFER_BEGIN); - if (ret) { - debug("SF: Failed to send command %02x: %d\n", cmd, ret); - return ret; - } - - timebase = get_timer(0); - do { - ret = spi_xfer(spi, 8, NULL, &status, 0); - if (ret) - return -1; - - if ((status & MACRONIX_SR_WIP) == 0) - break; - - } while (get_timer(timebase) < timeout); - - spi_xfer(spi, 0, NULL, NULL, SPI_XFER_END); - - if ((status & MACRONIX_SR_WIP) == 0) - return 0; - - /* Timed out */ - return -1; -} - -static int macronix_read_fast(struct spi_flash *flash, - u32 offset, size_t len, void *buf) -{ - struct macronix_spi_flash *mcx = to_macronix_spi_flash(flash); - unsigned long page_addr; - unsigned long page_size; - u8 cmd[5]; - - page_size = mcx->params->page_size; - page_addr = offset / page_size; - - cmd[0] = CMD_READ_ARRAY_FAST; - cmd[1] = page_addr >> 8; - cmd[2] = page_addr; - cmd[3] = offset % page_size; - cmd[4] = 0x00; - - return spi_flash_read_common(flash, cmd, sizeof(cmd), buf, len); -} - static int macronix_write(struct spi_flash *flash, u32 offset, size_t len, const void *buf) { @@ -216,11 +160,9 @@ static int macronix_write(struct spi_flash *flash, break; } - ret = macronix_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT); - if (ret < 0) { - debug("SF: Macronix page programming timed out\n"); + ret = spi_flash_cmd_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT); + if (ret) break; - } page_addr++; byte_addr = 0; @@ -233,67 +175,9 @@ static int macronix_write(struct spi_flash *flash, return ret; } -int macronix_erase(struct spi_flash *flash, u32 offset, size_t len) +static int macronix_erase(struct spi_flash *flash, u32 offset, size_t len) { - struct macronix_spi_flash *mcx = to_macronix_spi_flash(flash); - unsigned long sector_size; - size_t actual; - int ret; - u8 cmd[4]; - - /* - * This function currently uses sector erase only. - * probably speed things up by using bulk erase - * when possible. - */ - - sector_size = mcx->params->page_size * mcx->params->pages_per_sector - * mcx->params->sectors_per_block; - - if (offset % sector_size || len % sector_size) { - debug("SF: Erase offset/length not multiple of sector size\n"); - return -1; - } - - len /= sector_size; - cmd[0] = CMD_MX25XX_BE; - cmd[2] = 0x00; - cmd[3] = 0x00; - - ret = spi_claim_bus(flash->spi); - if (ret) { - debug("SF: Unable to claim SPI bus\n"); - return ret; - } - - ret = 0; - for (actual = 0; actual < len; actual++) { - cmd[1] = (offset / sector_size) + actual; - - ret = spi_flash_cmd(flash->spi, CMD_MX25XX_WREN, NULL, 0); - if (ret < 0) { - debug("SF: Enabling Write failed\n"); - break; - } - - ret = spi_flash_cmd_write(flash->spi, cmd, 4, NULL, 0); - if (ret < 0) { - debug("SF: Macronix page erase failed\n"); - break; - } - - ret = macronix_wait_ready(flash, SPI_FLASH_PAGE_ERASE_TIMEOUT); - if (ret < 0) { - debug("SF: Macronix page erase timed out\n"); - break; - } - } - - debug("SF: Macronix: Successfully erased %u bytes @ 0x%x\n", - len * sector_size, offset); - - spi_release_bus(flash->spi); - return ret; + return spi_flash_cmd_erase(flash, CMD_MX25XX_BE, offset, len); } struct spi_flash *spi_flash_probe_macronix(struct spi_slave *spi, u8 *idcode) @@ -326,13 +210,10 @@ struct spi_flash *spi_flash_probe_macronix(struct spi_slave *spi, u8 *idcode) mcx->flash.write = macronix_write; mcx->flash.erase = macronix_erase; - mcx->flash.read = macronix_read_fast; - mcx->flash.size = params->page_size * params->pages_per_sector - * params->sectors_per_block * params->nr_blocks; - - printf("SF: Detected %s with page size %u, total ", - params->name, params->page_size); - print_size(mcx->flash.size, "\n"); + mcx->flash.read = spi_flash_cmd_read_fast; + mcx->flash.sector_size = params->page_size * params->pages_per_sector + * params->sectors_per_block; + mcx->flash.size = mcx->flash.sector_size * params->nr_blocks; return &mcx->flash; } diff --git a/drivers/mtd/spi/ramtron.c b/drivers/mtd/spi/ramtron.c index 171390d..078d16c 100644 --- a/drivers/mtd/spi/ramtron.c +++ b/drivers/mtd/spi/ramtron.c @@ -233,7 +233,7 @@ static int ramtron_write(struct spi_flash *flash, CMD_RAMTRON_WRITE); } -int ramtron_erase(struct spi_flash *flash, u32 offset, size_t len) +static int ramtron_erase(struct spi_flash *flash, u32 offset, size_t len) { debug("SF: Erase of RAMTRON FRAMs is pointless\n"); return -1; @@ -312,8 +312,5 @@ found: sn->flash.erase = ramtron_erase; sn->flash.size = params->size; - printf("SF: Detected %s with size ", params->name); - print_size(sn->flash.size, "\n"); - return &sn->flash; } diff --git a/drivers/mtd/spi/spansion.c b/drivers/mtd/spi/spansion.c index c0900f9..a3401b3 100644 --- a/drivers/mtd/spi/spansion.c +++ b/drivers/mtd/spi/spansion.c @@ -54,8 +54,6 @@ #define SPSN_EXT_ID_S25FL128P_64KB 0x0301 #define SPSN_EXT_ID_S25FL032P 0x4d00 -#define SPANSION_SR_WIP (1 << 0) /* Write-in-Progress */ - struct spansion_spi_flash_params { u16 idcode1; u16 idcode2; @@ -135,56 +133,6 @@ static const struct spansion_spi_flash_params spansion_spi_flash_table[] = { }, }; -static int spansion_wait_ready(struct spi_flash *flash, unsigned long timeout) -{ - struct spi_slave *spi = flash->spi; - unsigned long timebase; - int ret; - u8 status; - - timebase = get_timer(0); - do { - ret = spi_flash_cmd(spi, CMD_S25FLXX_RDSR, &status, sizeof(status)); - if (ret) - return -1; - - if ((status & SPANSION_SR_WIP) == 0) - break; - - } while (get_timer(timebase) < timeout); - - - if ((status & SPANSION_SR_WIP) == 0) - return 0; - - /* Timed out */ - return -1; -} - -static int spansion_read_fast(struct spi_flash *flash, - u32 offset, size_t len, void *buf) -{ - struct spansion_spi_flash *spsn = to_spansion_spi_flash(flash); - unsigned long page_addr; - unsigned long page_size; - u8 cmd[5]; - - page_size = spsn->params->page_size; - page_addr = offset / page_size; - - cmd[0] = CMD_READ_ARRAY_FAST; - cmd[1] = page_addr >> 8; - cmd[2] = page_addr; - cmd[3] = offset % page_size; - cmd[4] = 0x00; - - debug - ("READ: 0x%x => cmd = { 0x%02x 0x%02x%02x%02x%02x } len = 0x%x\n", - offset, cmd[0], cmd[1], cmd[2], cmd[3], cmd[4], len); - - return spi_flash_read_common(flash, cmd, sizeof(cmd), buf, len); -} - static int spansion_write(struct spi_flash *flash, u32 offset, size_t len, const void *buf) { @@ -233,11 +181,9 @@ static int spansion_write(struct spi_flash *flash, break; } - ret = spansion_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT); - if (ret < 0) { - debug("SF: SPANSION page programming timed out\n"); + ret = spi_flash_cmd_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT); + if (ret) break; - } page_addr++; byte_addr = 0; @@ -250,66 +196,9 @@ static int spansion_write(struct spi_flash *flash, return ret; } -int spansion_erase(struct spi_flash *flash, u32 offset, size_t len) +static int spansion_erase(struct spi_flash *flash, u32 offset, size_t len) { - struct spansion_spi_flash *spsn = to_spansion_spi_flash(flash); - unsigned long sector_size; - size_t actual; - int ret; - u8 cmd[4]; - - /* - * This function currently uses sector erase only. - * probably speed things up by using bulk erase - * when possible. - */ - - sector_size = spsn->params->page_size * spsn->params->pages_per_sector; - - if (offset % sector_size || len % sector_size) { - debug("SF: Erase offset/length not multiple of sector size\n"); - return -1; - } - - cmd[0] = CMD_S25FLXX_SE; - cmd[2] = 0x00; - cmd[3] = 0x00; - - ret = spi_claim_bus(flash->spi); - if (ret) { - debug("SF: Unable to claim SPI bus\n"); - return ret; - } - - ret = 0; - for (actual = 0; actual < len; actual += sector_size) { - cmd[1] = (offset + actual) >> 16; - - ret = spi_flash_cmd(flash->spi, CMD_S25FLXX_WREN, NULL, 0); - if (ret < 0) { - debug("SF: Enabling Write failed\n"); - break; - } - - ret = spi_flash_cmd_write(flash->spi, cmd, 4, NULL, 0); - if (ret < 0) { - debug("SF: SPANSION page erase failed\n"); - break; - } - - /* Up to 2 seconds */ - ret = spansion_wait_ready(flash, SPI_FLASH_PAGE_ERASE_TIMEOUT); - if (ret < 0) { - debug("SF: SPANSION page erase timed out\n"); - break; - } - } - - debug("SF: SPANSION: Successfully erased %u bytes @ 0x%x\n", - len, offset); - - spi_release_bus(flash->spi); - return ret; + return spi_flash_cmd_erase(flash, CMD_S25FLXX_SE, offset, len); } struct spi_flash *spi_flash_probe_spansion(struct spi_slave *spi, u8 *idcode) @@ -347,13 +236,9 @@ struct spi_flash *spi_flash_probe_spansion(struct spi_slave *spi, u8 *idcode) spsn->flash.write = spansion_write; spsn->flash.erase = spansion_erase; - spsn->flash.read = spansion_read_fast; - spsn->flash.size = params->page_size * params->pages_per_sector - * params->nr_sectors; - - printf("SF: Detected %s with page size %u, total ", - params->name, params->page_size); - print_size(spsn->flash.size, "\n"); + spsn->flash.read = spi_flash_cmd_read_fast; + spsn->flash.sector_size = params->page_size * params->pages_per_sector; + spsn->flash.size = spsn->flash.sector_size * params->nr_sectors; return &spsn->flash; } diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c index b61d219..c75b716 100644 --- a/drivers/mtd/spi/spi_flash.c +++ b/drivers/mtd/spi/spi_flash.c @@ -14,32 +14,18 @@ #include "spi_flash_internal.h" -int spi_flash_cmd(struct spi_slave *spi, u8 cmd, void *response, size_t len) +static void spi_flash_addr(u32 addr, u8 *cmd) { - unsigned long flags = SPI_XFER_BEGIN; - int ret; - - if (len == 0) - flags |= SPI_XFER_END; - - ret = spi_xfer(spi, 8, &cmd, NULL, flags); - if (ret) { - debug("SF: Failed to send command %02x: %d\n", cmd, ret); - return ret; - } - - if (len) { - ret = spi_xfer(spi, len * 8, NULL, response, SPI_XFER_END); - if (ret) - debug("SF: Failed to read response (%zu bytes): %d\n", - len, ret); - } - - return ret; + /* cmd[0] is actual command */ + cmd[1] = addr >> 16; + cmd[2] = addr >> 8; + cmd[3] = addr >> 0; } -int spi_flash_cmd_read(struct spi_slave *spi, const u8 *cmd, - size_t cmd_len, void *data, size_t data_len) +static int spi_flash_read_write(struct spi_slave *spi, + const u8 *cmd, size_t cmd_len, + const u8 *data_out, u8 *data_in, + size_t data_len) { unsigned long flags = SPI_XFER_BEGIN; int ret; @@ -49,52 +35,149 @@ int spi_flash_cmd_read(struct spi_slave *spi, const u8 *cmd, ret = spi_xfer(spi, cmd_len * 8, cmd, NULL, flags); if (ret) { - debug("SF: Failed to send read command (%zu bytes): %d\n", + debug("SF: Failed to send command (%zu bytes): %d\n", cmd_len, ret); } else if (data_len != 0) { - ret = spi_xfer(spi, data_len * 8, NULL, data, SPI_XFER_END); + ret = spi_xfer(spi, data_len * 8, data_out, data_in, SPI_XFER_END); if (ret) - debug("SF: Failed to read %zu bytes of data: %d\n", + debug("SF: Failed to transfer %zu bytes of data: %d\n", data_len, ret); } return ret; } +int spi_flash_cmd(struct spi_slave *spi, u8 cmd, void *response, size_t len) +{ + return spi_flash_cmd_read(spi, &cmd, 1, response, len); +} + +int spi_flash_cmd_read(struct spi_slave *spi, const u8 *cmd, + size_t cmd_len, void *data, size_t data_len) +{ + return spi_flash_read_write(spi, cmd, cmd_len, NULL, data, data_len); +} + int spi_flash_cmd_write(struct spi_slave *spi, const u8 *cmd, size_t cmd_len, const void *data, size_t data_len) { - unsigned long flags = SPI_XFER_BEGIN; + return spi_flash_read_write(spi, cmd, cmd_len, data, NULL, data_len); +} + +int spi_flash_read_common(struct spi_flash *flash, const u8 *cmd, + size_t cmd_len, void *data, size_t data_len) +{ + struct spi_slave *spi = flash->spi; int ret; - if (data_len == 0) - flags |= SPI_XFER_END; + spi_claim_bus(spi); + ret = spi_flash_cmd_read(spi, cmd, cmd_len, data, data_len); + spi_release_bus(spi); - ret = spi_xfer(spi, cmd_len * 8, cmd, NULL, flags); + return ret; +} + +int spi_flash_cmd_read_fast(struct spi_flash *flash, u32 offset, + size_t len, void *data) +{ + u8 cmd[5]; + + cmd[0] = CMD_READ_ARRAY_FAST; + spi_flash_addr(offset, cmd); + cmd[4] = 0x00; + + return spi_flash_read_common(flash, cmd, sizeof(cmd), data, len); +} + +int spi_flash_cmd_poll_bit(struct spi_flash *flash, unsigned long timeout, + u8 cmd, u8 poll_bit) +{ + struct spi_slave *spi = flash->spi; + unsigned long timebase; + int ret; + u8 status; + + ret = spi_xfer(spi, 8, &cmd, NULL, SPI_XFER_BEGIN); if (ret) { - debug("SF: Failed to send read command (%zu bytes): %d\n", - cmd_len, ret); - } else if (data_len != 0) { - ret = spi_xfer(spi, data_len * 8, data, NULL, SPI_XFER_END); - if (ret) - debug("SF: Failed to read %zu bytes of data: %d\n", - data_len, ret); + debug("SF: Failed to send command %02x: %d\n", cmd, ret); + return ret; } - return ret; + timebase = get_timer(0); + do { + ret = spi_xfer(spi, 8, NULL, &status, 0); + if (ret) + return -1; + + if ((status & poll_bit) == 0) + break; + + } while (get_timer(timebase) < timeout); + + spi_xfer(spi, 0, NULL, NULL, SPI_XFER_END); + + if ((status & poll_bit) == 0) + return 0; + + /* Timed out */ + debug("SF: time out!\n"); + return -1; } +int spi_flash_cmd_wait_ready(struct spi_flash *flash, unsigned long timeout) +{ + return spi_flash_cmd_poll_bit(flash, timeout, + CMD_READ_STATUS, STATUS_WIP); +} -int spi_flash_read_common(struct spi_flash *flash, const u8 *cmd, - size_t cmd_len, void *data, size_t data_len) +int spi_flash_cmd_erase(struct spi_flash *flash, u8 erase_cmd, + u32 offset, size_t len) { - struct spi_slave *spi = flash->spi; + u32 start, end, erase_size; int ret; + u8 cmd[4]; - spi_claim_bus(spi); - ret = spi_flash_cmd_read(spi, cmd, cmd_len, data, data_len); - spi_release_bus(spi); + erase_size = flash->sector_size; + if (offset % erase_size || len % erase_size) { + debug("SF: Erase offset/length not multiple of erase size\n"); + return -1; + } + + ret = spi_claim_bus(flash->spi); + if (ret) { + debug("SF: Unable to claim SPI bus\n"); + return ret; + } + + cmd[0] = erase_cmd; + start = offset; + end = start + len; + while (offset < end) { + spi_flash_addr(offset, cmd); + offset += erase_size; + + debug("SF: erase %2x %2x %2x %2x (%x)\n", cmd[0], cmd[1], + cmd[2], cmd[3], offset); + + ret = spi_flash_cmd(flash->spi, CMD_WRITE_ENABLE, NULL, 0); + if (ret) + goto out; + + ret = spi_flash_cmd_write(flash->spi, cmd, sizeof(cmd), NULL, 0); + if (ret) + goto out; + + ret = spi_flash_cmd_wait_ready(flash, SPI_FLASH_PAGE_ERASE_TIMEOUT); + if (ret) + goto out; + } + + debug("SF: Successfully erased %lu bytes @ %#x\n", + len * erase_size, start); + + out: + spi_release_bus(flash->spi); return ret; } @@ -214,6 +297,10 @@ struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs, goto err_manufacturer_probe; } + printf("SF: Detected %s with page size ", flash->name); + print_size(flash->sector_size, ", total "); + print_size(flash->size, "\n"); + spi_release_bus(spi); return flash; diff --git a/drivers/mtd/spi/spi_flash_internal.h b/drivers/mtd/spi/spi_flash_internal.h index 68dcffb..fc109ce 100644 --- a/drivers/mtd/spi/spi_flash_internal.h +++ b/drivers/mtd/spi/spi_flash_internal.h @@ -19,6 +19,12 @@ #define CMD_READ_ARRAY_FAST 0x0b #define CMD_READ_ARRAY_LEGACY 0xe8 +#define CMD_READ_STATUS 0x05 +#define CMD_WRITE_ENABLE 0x06 + +/* Common status */ +#define STATUS_WIP 0x01 + /* Send a single-byte command to the device and read the response */ int spi_flash_cmd(struct spi_slave *spi, u8 cmd, void *response, size_t len); @@ -29,6 +35,9 @@ int spi_flash_cmd(struct spi_slave *spi, u8 cmd, void *response, size_t len); int spi_flash_cmd_read(struct spi_slave *spi, const u8 *cmd, size_t cmd_len, void *data, size_t data_len); +int spi_flash_cmd_read_fast(struct spi_flash *flash, u32 offset, + size_t len, void *data); + /* * Send a multi-byte command to the device followed by (optional) * data. Used for programming the flash array, etc. @@ -43,6 +52,20 @@ int spi_flash_cmd_write(struct spi_slave *spi, const u8 *cmd, size_t cmd_len, int spi_flash_read_common(struct spi_flash *flash, const u8 *cmd, size_t cmd_len, void *data, size_t data_len); +/* Send a command to the device and wait for some bit to clear itself. */ +int spi_flash_cmd_poll_bit(struct spi_flash *flash, unsigned long timeout, + u8 cmd, u8 poll_bit); + +/* + * Send the read status command to the device and wait for the wip + * (write-in-progress) bit to clear itself. + */ +int spi_flash_cmd_wait_ready(struct spi_flash *flash, unsigned long timeout); + +/* Erase sectors. */ +int spi_flash_cmd_erase(struct spi_flash *flash, u8 erase_cmd, + u32 offset, size_t len); + /* Manufacturer-specific probe functions */ struct spi_flash *spi_flash_probe_spansion(struct spi_slave *spi, u8 *idcode); struct spi_flash *spi_flash_probe_atmel(struct spi_slave *spi, u8 *idcode); diff --git a/drivers/mtd/spi/sst.c b/drivers/mtd/spi/sst.c index 2557891..4dc2db2 100644 --- a/drivers/mtd/spi/sst.c +++ b/drivers/mtd/spi/sst.c @@ -71,6 +71,10 @@ static const struct sst_spi_flash_params sst_spi_flash_table[] = { .nr_sectors = 1024, .name = "SST25VF032B", },{ + .idcode1 = 0x4b, + .nr_sectors = 2048, + .name = "SST25VF064C", + },{ .idcode1 = 0x01, .nr_sectors = 16, .name = "SST25WF512", @@ -90,41 +94,6 @@ static const struct sst_spi_flash_params sst_spi_flash_table[] = { }; static int -sst_wait_ready(struct spi_flash *flash, unsigned long timeout) -{ - struct spi_slave *spi = flash->spi; - unsigned long timebase; - int ret; - u8 byte = CMD_SST_RDSR; - - ret = spi_xfer(spi, sizeof(byte) * 8, &byte, NULL, SPI_XFER_BEGIN); - if (ret) { - debug("SF: Failed to send command %02x: %d\n", byte, ret); - return ret; - } - - timebase = get_timer(0); - do { - ret = spi_xfer(spi, sizeof(byte) * 8, NULL, &byte, 0); - if (ret) - break; - - if ((byte & SST_SR_WIP) == 0) - break; - - } while (get_timer(timebase) < timeout); - - spi_xfer(spi, 0, NULL, NULL, SPI_XFER_END); - - if (!ret && (byte & SST_SR_WIP) != 0) - ret = -1; - - if (ret) - debug("SF: sst wait for ready timed out\n"); - return ret; -} - -static int sst_enable_writing(struct spi_flash *flash) { int ret = spi_flash_cmd(flash->spi, CMD_SST_WREN, NULL, 0); @@ -143,19 +112,6 @@ sst_disable_writing(struct spi_flash *flash) } static int -sst_read_fast(struct spi_flash *flash, u32 offset, size_t len, void *buf) -{ - u8 cmd[5] = { - CMD_READ_ARRAY_FAST, - offset >> 16, - offset >> 8, - offset, - 0x00, - }; - return spi_flash_read_common(flash, cmd, sizeof(cmd), buf, len); -} - -static int sst_byte_write(struct spi_flash *flash, u32 offset, const void *buf) { int ret; @@ -177,7 +133,7 @@ sst_byte_write(struct spi_flash *flash, u32 offset, const void *buf) if (ret) return ret; - return sst_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT); + return spi_flash_cmd_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT); } static int @@ -224,7 +180,7 @@ sst_write(struct spi_flash *flash, u32 offset, size_t len, const void *buf) break; } - ret = sst_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT); + ret = spi_flash_cmd_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT); if (ret) break; @@ -247,67 +203,9 @@ sst_write(struct spi_flash *flash, u32 offset, size_t len, const void *buf) return ret; } -int -sst_erase(struct spi_flash *flash, u32 offset, size_t len) +static int sst_erase(struct spi_flash *flash, u32 offset, size_t len) { - unsigned long sector_size; - u32 start, end; - int ret; - u8 cmd[4]; - - /* - * This function currently uses sector erase only. - * Probably speed things up by using bulk erase - * when possible. - */ - - sector_size = SST_SECTOR_SIZE; - - if (offset % sector_size) { - debug("SF: Erase offset not multiple of sector size\n"); - return -1; - } - - ret = spi_claim_bus(flash->spi); - if (ret) { - debug("SF: Unable to claim SPI bus\n"); - return ret; - } - - cmd[0] = CMD_SST_SE; - cmd[3] = 0; - start = offset; - end = start + len; - - ret = 0; - while (offset < end) { - cmd[1] = offset >> 16; - cmd[2] = offset >> 8; - offset += sector_size; - - debug("SF: erase %2x %2x %2x %2x (%x)\n", cmd[0], cmd[1], - cmd[2], cmd[3], offset); - - ret = sst_enable_writing(flash); - if (ret) - break; - - ret = spi_flash_cmd_write(flash->spi, cmd, sizeof(cmd), NULL, 0); - if (ret) { - debug("SF: sst page erase failed\n"); - break; - } - - ret = sst_wait_ready(flash, SPI_FLASH_PAGE_ERASE_TIMEOUT); - if (ret) - break; - } - - debug("SF: sst: Successfully erased %lu bytes @ 0x%x\n", - len * sector_size, start); - - spi_release_bus(flash->spi); - return ret; + return spi_flash_cmd_erase(flash, CMD_SST_SE, offset, len); } static int @@ -361,12 +259,9 @@ spi_flash_probe_sst(struct spi_slave *spi, u8 *idcode) stm->flash.write = sst_write; stm->flash.erase = sst_erase; - stm->flash.read = sst_read_fast; - stm->flash.size = SST_SECTOR_SIZE * params->nr_sectors; - - printf("SF: Detected %s with page size %u, total ", - params->name, SST_SECTOR_SIZE); - print_size(stm->flash.size, "\n"); + stm->flash.read = spi_flash_cmd_read_fast; + stm->flash.sector_size = SST_SECTOR_SIZE; + stm->flash.size = stm->flash.sector_size * params->nr_sectors; /* Flash powers up read-only, so clear BP# bits */ sst_unlock(&stm->flash); diff --git a/drivers/mtd/spi/stmicro.c b/drivers/mtd/spi/stmicro.c index 3134027..a1959ca 100644 --- a/drivers/mtd/spi/stmicro.c +++ b/drivers/mtd/spi/stmicro.c @@ -55,8 +55,6 @@ #define STM_ID_M25P80 0x14 #define STM_ID_M25P128 0x18 -#define STMICRO_SR_WIP (1 << 0) /* Write-in-Progress */ - struct stmicro_spi_flash_params { u8 idcode1; u16 page_size; @@ -136,60 +134,6 @@ static const struct stmicro_spi_flash_params stmicro_spi_flash_table[] = { }, }; -static int stmicro_wait_ready(struct spi_flash *flash, unsigned long timeout) -{ - struct spi_slave *spi = flash->spi; - unsigned long timebase; - int ret; - u8 cmd = CMD_M25PXX_RDSR; - u8 status; - - ret = spi_xfer(spi, 8, &cmd, NULL, SPI_XFER_BEGIN); - if (ret) { - debug("SF: Failed to send command %02x: %d\n", cmd, ret); - return ret; - } - - timebase = get_timer(0); - do { - ret = spi_xfer(spi, 8, NULL, &status, 0); - if (ret) - return -1; - - if ((status & STMICRO_SR_WIP) == 0) - break; - - } while (get_timer(timebase) < timeout); - - spi_xfer(spi, 0, NULL, NULL, SPI_XFER_END); - - if ((status & STMICRO_SR_WIP) == 0) - return 0; - - /* Timed out */ - return -1; -} - -static int stmicro_read_fast(struct spi_flash *flash, - u32 offset, size_t len, void *buf) -{ - struct stmicro_spi_flash *stm = to_stmicro_spi_flash(flash); - unsigned long page_addr; - unsigned long page_size; - u8 cmd[5]; - - page_size = stm->params->page_size; - page_addr = offset / page_size; - - cmd[0] = CMD_READ_ARRAY_FAST; - cmd[1] = page_addr >> 8; - cmd[2] = page_addr; - cmd[3] = offset % page_size; - cmd[4] = 0x00; - - return spi_flash_read_common(flash, cmd, sizeof(cmd), buf, len); -} - static int stmicro_write(struct spi_flash *flash, u32 offset, size_t len, const void *buf) { @@ -238,11 +182,9 @@ static int stmicro_write(struct spi_flash *flash, break; } - ret = stmicro_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT); - if (ret < 0) { - debug("SF: STMicro page programming timed out\n"); + ret = spi_flash_cmd_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT); + if (ret) break; - } page_addr++; byte_addr = 0; @@ -255,67 +197,9 @@ static int stmicro_write(struct spi_flash *flash, return ret; } -int stmicro_erase(struct spi_flash *flash, u32 offset, size_t len) +static int stmicro_erase(struct spi_flash *flash, u32 offset, size_t len) { - struct stmicro_spi_flash *stm = to_stmicro_spi_flash(flash); - unsigned long sector_size; - size_t actual; - int ret; - u8 cmd[4]; - - /* - * This function currently uses sector erase only. - * probably speed things up by using bulk erase - * when possible. - */ - - sector_size = stm->params->page_size * stm->params->pages_per_sector; - - if (offset % sector_size || len % sector_size) { - debug("SF: Erase offset/length not multiple of sector size\n"); - return -1; - } - - len /= sector_size; - cmd[0] = CMD_M25PXX_SE; - cmd[2] = 0x00; - cmd[3] = 0x00; - - ret = spi_claim_bus(flash->spi); - if (ret) { - debug("SF: Unable to claim SPI bus\n"); - return ret; - } - - ret = 0; - for (actual = 0; actual < len; actual++) { - cmd[1] = offset >> 16; - offset += sector_size; - - ret = spi_flash_cmd(flash->spi, CMD_M25PXX_WREN, NULL, 0); - if (ret < 0) { - debug("SF: Enabling Write failed\n"); - break; - } - - ret = spi_flash_cmd_write(flash->spi, cmd, 4, NULL, 0); - if (ret < 0) { - debug("SF: STMicro page erase failed\n"); - break; - } - - ret = stmicro_wait_ready(flash, SPI_FLASH_PAGE_ERASE_TIMEOUT); - if (ret < 0) { - debug("SF: STMicro page erase timed out\n"); - break; - } - } - - debug("SF: STMicro: Successfully erased %u bytes @ 0x%x\n", - len * sector_size, offset); - - spi_release_bus(flash->spi); - return ret; + return spi_flash_cmd_erase(flash, CMD_M25PXX_SE, offset, len); } struct spi_flash *spi_flash_probe_stmicro(struct spi_slave *spi, u8 * idcode) @@ -361,13 +245,9 @@ struct spi_flash *spi_flash_probe_stmicro(struct spi_slave *spi, u8 * idcode) stm->flash.write = stmicro_write; stm->flash.erase = stmicro_erase; - stm->flash.read = stmicro_read_fast; - stm->flash.size = params->page_size * params->pages_per_sector - * params->nr_sectors; - - printf("SF: Detected %s with page size %u, total ", - params->name, params->page_size); - print_size(stm->flash.size, "\n"); + stm->flash.read = spi_flash_cmd_read_fast; + stm->flash.sector_size = params->page_size * params->pages_per_sector; + stm->flash.size = stm->flash.sector_size * params->nr_sectors; return &stm->flash; } diff --git a/drivers/mtd/spi/winbond.c b/drivers/mtd/spi/winbond.c index 4452355..e8d30ae 100644 --- a/drivers/mtd/spi/winbond.c +++ b/drivers/mtd/spi/winbond.c @@ -24,8 +24,6 @@ #define CMD_W25_DP 0xb9 /* Deep Power-down */ #define CMD_W25_RES 0xab /* Release from DP, and Read Signature */ -#define WINBOND_SR_WIP (1 << 0) /* Write-in-Progress */ - struct winbond_spi_flash_params { uint16_t id; /* Log2 of page size in power-of-two mode */ @@ -107,81 +105,6 @@ static const struct winbond_spi_flash_params winbond_spi_flash_table[] = { }, }; -static int winbond_wait_ready(struct spi_flash *flash, unsigned long timeout) -{ - struct spi_slave *spi = flash->spi; - unsigned long timebase; - int ret; - u8 status; - u8 cmd[4] = { CMD_W25_RDSR, 0xff, 0xff, 0xff }; - - ret = spi_xfer(spi, 32, &cmd[0], NULL, SPI_XFER_BEGIN); - if (ret) { - debug("SF: Failed to send command %02x: %d\n", cmd, ret); - return ret; - } - - timebase = get_timer(0); - do { - ret = spi_xfer(spi, 8, NULL, &status, 0); - if (ret) { - debug("SF: Failed to get status for cmd %02x: %d\n", cmd, ret); - return -1; - } - - if ((status & WINBOND_SR_WIP) == 0) - break; - - } while (get_timer(timebase) < timeout); - - spi_xfer(spi, 0, NULL, NULL, SPI_XFER_END); - - if ((status & WINBOND_SR_WIP) == 0) - return 0; - - debug("SF: Timed out on command %02x: %d\n", cmd, ret); - /* Timed out */ - return -1; -} - -/* - * Assemble the address part of a command for Winbond devices in - * non-power-of-two page size mode. - */ -static void winbond_build_address(struct winbond_spi_flash *stm, u8 *cmd, u32 offset) -{ - unsigned long page_addr; - unsigned long byte_addr; - unsigned long page_size; - unsigned int page_shift; - - /* - * The "extra" space per page is the power-of-two page size - * divided by 32. - */ - page_shift = stm->params->l2_page_size; - page_size = (1 << page_shift); - page_addr = offset / page_size; - byte_addr = offset % page_size; - - cmd[0] = page_addr >> (16 - page_shift); - cmd[1] = page_addr << (page_shift - 8) | (byte_addr >> 8); - cmd[2] = byte_addr; -} - -static int winbond_read_fast(struct spi_flash *flash, - u32 offset, size_t len, void *buf) -{ - struct winbond_spi_flash *stm = to_winbond_spi_flash(flash); - u8 cmd[5]; - - cmd[0] = CMD_READ_ARRAY_FAST; - winbond_build_address(stm, cmd + 1, offset); - cmd[4] = 0x00; - - return spi_flash_read_common(flash, cmd, sizeof(cmd), buf, len); -} - static int winbond_write(struct spi_flash *flash, u32 offset, size_t len, const void *buf) { @@ -230,11 +153,9 @@ static int winbond_write(struct spi_flash *flash, goto out; } - ret = winbond_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT); - if (ret < 0) { - debug("SF: Winbond page programming timed out\n"); + ret = spi_flash_cmd_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT); + if (ret) goto out; - } page_addr++; byte_addr = 0; @@ -249,69 +170,9 @@ out: return ret; } -int winbond_erase(struct spi_flash *flash, u32 offset, size_t len) +static int winbond_erase(struct spi_flash *flash, u32 offset, size_t len) { - struct winbond_spi_flash *stm = to_winbond_spi_flash(flash); - unsigned long sector_size; - unsigned int page_shift; - size_t actual; - int ret; - u8 cmd[4]; - - /* - * This function currently uses sector erase only. - * probably speed things up by using bulk erase - * when possible. - */ - - page_shift = stm->params->l2_page_size; - sector_size = (1 << page_shift) * stm->params->pages_per_sector; - - if (offset % sector_size || len % sector_size) { - debug("SF: Erase offset/length not multiple of sector size\n"); - return -1; - } - - len /= sector_size; - cmd[0] = CMD_W25_SE; - - ret = spi_claim_bus(flash->spi); - if (ret) { - debug("SF: Unable to claim SPI bus\n"); - return ret; - } - - for (actual = 0; actual < len; actual++) { - winbond_build_address(stm, &cmd[1], offset + actual * sector_size); - printf("Erase: %02x %02x %02x %02x\n", - cmd[0], cmd[1], cmd[2], cmd[3]); - - ret = spi_flash_cmd(flash->spi, CMD_W25_WREN, NULL, 0); - if (ret < 0) { - debug("SF: Enabling Write failed\n"); - goto out; - } - - ret = spi_flash_cmd_write(flash->spi, cmd, 4, NULL, 0); - if (ret < 0) { - debug("SF: Winbond sector erase failed\n"); - goto out; - } - - ret = winbond_wait_ready(flash, SPI_FLASH_PAGE_ERASE_TIMEOUT); - if (ret < 0) { - debug("SF: Winbond sector erase timed out\n"); - goto out; - } - } - - debug("SF: Winbond: Successfully erased %u bytes @ 0x%x\n", - len * sector_size, offset); - ret = 0; - -out: - spi_release_bus(flash->spi); - return ret; + return spi_flash_cmd_erase(flash, CMD_W25_SE, offset, len); } struct spi_flash *spi_flash_probe_winbond(struct spi_slave *spi, u8 *idcode) @@ -348,14 +209,12 @@ struct spi_flash *spi_flash_probe_winbond(struct spi_slave *spi, u8 *idcode) stm->flash.write = winbond_write; stm->flash.erase = winbond_erase; - stm->flash.read = winbond_read_fast; + stm->flash.read = spi_flash_cmd_read_fast; + stm->flash.sector_size = (1 << stm->params->l2_page_size) * + stm->params->pages_per_sector; stm->flash.size = page_size * params->pages_per_sector * params->sectors_per_block * params->nr_blocks; - printf("SF: Detected %s with page size %u, total ", - params->name, page_size); - print_size(stm->flash.size, "\n"); - return &stm->flash; } diff --git a/drivers/net/Makefile b/drivers/net/Makefile index fd9d0b4..819b197 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -79,7 +79,7 @@ COBJS-$(CONFIG_TIGON3) += tigon3.o COBJS-$(CONFIG_TIGON3) += bcm570x_autoneg.o COBJS-$(CONFIG_TIGON3) += 5701rls.o COBJS-$(CONFIG_DRIVER_TI_EMAC) += davinci_emac.o -COBJS-$(CONFIG_TSEC_ENET) += tsec.o +COBJS-$(CONFIG_TSEC_ENET) += tsec.o fsl_mdio.o COBJS-$(CONFIG_TSI108_ETH) += tsi108_eth.o COBJS-$(CONFIG_ULI526X) += uli526x.o COBJS-$(CONFIG_VSC7385_ENET) += vsc7385.o diff --git a/drivers/net/at91_emac.c b/drivers/net/at91_emac.c index 4e5685c..90eb515 100644 --- a/drivers/net/at91_emac.c +++ b/drivers/net/at91_emac.c @@ -93,7 +93,7 @@ #define RBF_MULTICAST (1<<30) #define RBF_UNICAST (1<<29) #define RBF_EXTERNAL (1<<28) -#define RBF_UNKOWN (1<<27) +#define RBF_UNKNOWN (1<<27) #define RBF_SIZE 0x07ff #define RBF_LOCAL4 (1<<26) #define RBF_LOCAL3 (1<<25) diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c index c359f54..66c0d13 100644 --- a/drivers/net/davinci_emac.c +++ b/drivers/net/davinci_emac.c @@ -247,10 +247,10 @@ static int gen_get_link_speed(int phy_addr) (tmp & 0x04)) { #if defined(CONFIG_DRIVER_TI_EMAC_USE_RMII) && \ defined(CONFIG_MACH_DAVINCI_DA850_EVM) - davinci_eth_phy_read(phy_addr, PHY_ANLPAR, &tmp); + davinci_eth_phy_read(phy_addr, MII_LPA, &tmp); /* Speed doesn't matter, there is no setting for it in EMAC. */ - if (tmp & (PHY_ANLPAR_TXFD | PHY_ANLPAR_10FD)) { + if (tmp & (LPA_100FULL | LPA_10FULL)) { /* set EMAC for Full Duplex */ writel(EMAC_MACCONTROL_MIIEN_ENABLE | EMAC_MACCONTROL_FULLDUPLEX_ENABLE, @@ -261,7 +261,7 @@ static int gen_get_link_speed(int phy_addr) &adap_emac->MACCONTROL); } - if (tmp & (PHY_ANLPAR_TXFD | PHY_ANLPAR_TX)) + if (tmp & (LPA_100FULL | LPA_100HALF)) writel(readl(&adap_emac->MACCONTROL) | EMAC_MACCONTROL_RMIISPEED_100, &adap_emac->MACCONTROL); diff --git a/drivers/net/dm9000x.c b/drivers/net/dm9000x.c index 709f67a..b5c5573 100644 --- a/drivers/net/dm9000x.c +++ b/drivers/net/dm9000x.c @@ -110,8 +110,8 @@ static board_info_t dm9000_info; /* function declaration ------------------------------------- */ static int dm9000_probe(void); -static u16 phy_read(int); -static void phy_write(int, u16); +static u16 dm9000_phy_read(int); +static void dm9000_phy_write(int, u16); static u8 DM9000_ior(int); static void DM9000_iow(int reg, u8 value); @@ -361,7 +361,7 @@ static int dm9000_init(struct eth_device *dev, bd_t *bd) DM9000_iow(DM9000_IMR, IMR_PAR); i = 0; - while (!(phy_read(1) & 0x20)) { /* autonegation complete bit */ + while (!(dm9000_phy_read(1) & 0x20)) { /* autonegation complete bit */ udelay(1000); i++; if (i == 10000) { @@ -371,7 +371,7 @@ static int dm9000_init(struct eth_device *dev, bd_t *bd) } /* see what we've got */ - lnk = phy_read(17) >> 12; + lnk = dm9000_phy_read(17) >> 12; printf("operating at "); switch (lnk) { case 1: @@ -445,7 +445,7 @@ static void dm9000_halt(struct eth_device *netdev) DM9000_DBG("%s\n", __func__); /* RESET devie */ - phy_write(0, 0x8000); /* PHY RESET */ + dm9000_phy_write(0, 0x8000); /* PHY RESET */ DM9000_iow(DM9000_GPR, 0x01); /* Power-Down PHY */ DM9000_iow(DM9000_IMR, 0x80); /* Disable all interrupt */ DM9000_iow(DM9000_RCR, 0x00); /* Disable RX */ @@ -581,7 +581,7 @@ DM9000_iow(int reg, u8 value) Read a word from phyxcer */ static u16 -phy_read(int reg) +dm9000_phy_read(int reg) { u16 val; @@ -593,7 +593,7 @@ phy_read(int reg) val = (DM9000_ior(DM9000_EPDRH) << 8) | DM9000_ior(DM9000_EPDRL); /* The read data keeps on REG_0D & REG_0E */ - DM9000_DBG("phy_read(0x%x): 0x%x\n", reg, val); + DM9000_DBG("dm9000_phy_read(0x%x): 0x%x\n", reg, val); return val; } @@ -601,7 +601,7 @@ phy_read(int reg) Write a word to phyxcer */ static void -phy_write(int reg, u16 value) +dm9000_phy_write(int reg, u16 value) { /* Fill the phyxcer register into REG_0C */ @@ -613,7 +613,7 @@ phy_write(int reg, u16 value) DM9000_iow(DM9000_EPCR, 0xa); /* Issue phyxcer write command */ udelay(500); /* Wait write complete */ DM9000_iow(DM9000_EPCR, 0x0); /* Clear phyxcer write command */ - DM9000_DBG("phy_write(reg:0x%x, value:0x%x)\n", reg, value); + DM9000_DBG("dm9000_phy_write(reg:0x%x, value:0x%x)\n", reg, value); } int dm9000_initialize(bd_t *bis) diff --git a/drivers/net/e1000.c b/drivers/net/e1000.c index 5f390bd..98145bc 100644 --- a/drivers/net/e1000.c +++ b/drivers/net/e1000.c @@ -40,6 +40,8 @@ tested on both gig copper and gig fiber boards * Copyright (C) Linux Networx. * Massive upgrade to work with the new intel gigabit NICs. * <ebiederman at lnxi dot com> + * + * Copyright 2011 Freescale Semiconductor, Inc. */ #include "e1000.h" @@ -100,6 +102,7 @@ static struct pci_device_id supported[] = { {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82573E}, {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82573E_IAMT}, {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82573L}, + {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82574L}, {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82546GB_QUAD_COPPER_KSP3}, {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80003ES2LAN_COPPER_DPT}, {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80003ES2LAN_SERDES_DPT}, @@ -331,7 +334,7 @@ static boolean_t e1000_is_onboard_nvm_eeprom(struct e1000_hw *hw) if (hw->mac_type == e1000_ich8lan) return FALSE; - if (hw->mac_type == e1000_82573) { + if (hw->mac_type == e1000_82573 || hw->mac_type == e1000_82574) { eecd = E1000_READ_REG(hw, EECD); /* Isolate bits 15 & 16 */ @@ -364,7 +367,7 @@ e1000_acquire_eeprom(struct e1000_hw *hw) return -E1000_ERR_SWFW_SYNC; eecd = E1000_READ_REG(hw, EECD); - if (hw->mac_type != e1000_82573) { + if (hw->mac_type != e1000_82573 || hw->mac_type != e1000_82574) { /* Request EEPROM Access */ if (hw->mac_type > e1000_82544) { eecd |= E1000_EECD_REQ; @@ -498,6 +501,7 @@ static int32_t e1000_init_eeprom_params(struct e1000_hw *hw) eeprom->use_eewr = FALSE; break; case e1000_82573: + case e1000_82574: eeprom->type = e1000_eeprom_spi; eeprom->opcode_bits = 8; eeprom->delay_usec = 1; @@ -1317,6 +1321,9 @@ e1000_set_mac_type(struct e1000_hw *hw) case E1000_DEV_ID_82573L: hw->mac_type = e1000_82573; break; + case E1000_DEV_ID_82574L: + hw->mac_type = e1000_82574; + break; case E1000_DEV_ID_80003ES2LAN_COPPER_SPT: case E1000_DEV_ID_80003ES2LAN_SERDES_SPT: case E1000_DEV_ID_80003ES2LAN_COPPER_DPT: @@ -1487,6 +1494,7 @@ e1000_initialize_hardware_bits(struct e1000_hw *hw) E1000_WRITE_REG(hw, TARC1, reg_tarc1); break; case e1000_82573: + case e1000_82574: reg_ctrl_ext = E1000_READ_REG(hw, CTRL_EXT); reg_ctrl_ext &= ~(1 << 23); reg_ctrl_ext |= (1 << 22); @@ -1728,12 +1736,11 @@ e1000_init_hw(struct eth_device *nic) | E1000_TXDCTL_FULL_TX_DESC_WB; E1000_WRITE_REG(hw, TXDCTL1, ctrl); break; - } - - if (hw->mac_type == e1000_82573) { - uint32_t gcr = E1000_READ_REG(hw, GCR); - gcr |= E1000_GCR_L1_ACT_WITHOUT_L0S_RX; - E1000_WRITE_REG(hw, GCR, gcr); + case e1000_82573: + case e1000_82574: + reg_data = E1000_READ_REG(hw, GCR); + reg_data |= E1000_GCR_L1_ACT_WITHOUT_L0S_RX; + E1000_WRITE_REG(hw, GCR, reg_data); } #if 0 @@ -1812,6 +1819,7 @@ e1000_setup_link(struct eth_device *nic) switch (hw->mac_type) { case e1000_ich8lan: case e1000_82573: + case e1000_82574: hw->fc = e1000_fc_full; break; default: @@ -4560,6 +4568,9 @@ static int e1000_set_phy_type (struct e1000_hw *hw) hw->phy_type = e1000_phy_gg82563; break; } + case BME1000_E_PHY_ID: + hw->phy_type = e1000_phy_bm; + break; /* Fall Through */ default: /* Should never have loaded on this device */ @@ -4646,6 +4657,10 @@ e1000_detect_gig_phy(struct e1000_hw *hw) if (hw->phy_id == M88E1111_I_PHY_ID) match = TRUE; break; + case e1000_82574: + if (hw->phy_id == BME1000_E_PHY_ID) + match = TRUE; + break; case e1000_80003es2lan: if (hw->phy_id == GG82563_E_PHY_ID) match = TRUE; @@ -4710,6 +4725,7 @@ e1000_set_media_type(struct e1000_hw *hw) break; case e1000_ich8lan: case e1000_82573: + case e1000_82574: /* The STATUS_TBIMODE bit is reserved or reused * for the this device. */ @@ -5125,6 +5141,7 @@ void e1000_get_bus_type(struct e1000_hw *hw) case e1000_82571: case e1000_82572: case e1000_82573: + case e1000_82574: case e1000_80003es2lan: hw->bus_type = e1000_bus_type_pci_express; break; diff --git a/drivers/net/e1000.h b/drivers/net/e1000.h index eb0804b..720d8c6 100644 --- a/drivers/net/e1000.h +++ b/drivers/net/e1000.h @@ -2,6 +2,7 @@ Copyright(c) 1999 - 2002 Intel Corporation. All rights reserved. + Copyright 2011 Freescale Semiconductor, Inc. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free @@ -81,6 +82,7 @@ typedef enum { e1000_82571, e1000_82572, e1000_82573, + e1000_82574, e1000_80003es2lan, e1000_ich8lan, e1000_num_macs @@ -200,6 +202,7 @@ typedef enum { e1000_phy_gg82563, e1000_phy_igp_3, e1000_phy_ife, + e1000_phy_bm, e1000_phy_undefined = 0xFF } e1000_phy_type; @@ -286,6 +289,7 @@ struct e1000_phy_stats { #define E1000_DEV_ID_82573E 0x108B #define E1000_DEV_ID_82573E_IAMT 0x108C #define E1000_DEV_ID_82573L 0x109A +#define E1000_DEV_ID_82574L 0x10D3 #define E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3 0x10B5 #define E1000_DEV_ID_80003ES2LAN_COPPER_DPT 0x1096 #define E1000_DEV_ID_80003ES2LAN_SERDES_DPT 0x1098 @@ -2417,6 +2421,8 @@ struct e1000_hw { #define L1LXT971A_PHY_ID 0x001378E0 #define GG82563_E_PHY_ID 0x01410CA0 +#define BME1000_E_PHY_ID 0x01410CB0 + /* Miscellaneous PHY bit definitions. */ #define PHY_PREAMBLE 0xFFFFFFFF #define PHY_SOF 0x01 diff --git a/drivers/net/enc28j60.c b/drivers/net/enc28j60.c index 6c161b6..d55cacd 100644 --- a/drivers/net/enc28j60.c +++ b/drivers/net/enc28j60.c @@ -314,7 +314,7 @@ static void enc_release_bus(enc_dev_t *enc) /* * Read PHY register */ -static u16 phy_read(enc_dev_t *enc, const u8 addr) +static u16 enc_phy_read(enc_dev_t *enc, const u8 addr) { uint64_t etime; u8 status; @@ -339,7 +339,7 @@ static u16 phy_read(enc_dev_t *enc, const u8 addr) /* * Write PHY register */ -static void phy_write(enc_dev_t *enc, const u8 addr, const u16 data) +static void enc_phy_write(enc_dev_t *enc, const u8 addr, const u16 data) { uint64_t etime; u8 status; @@ -374,7 +374,7 @@ static int enc_phy_link_wait(enc_dev_t *enc) #ifdef CONFIG_ENC_SILENTLINK /* check if we have a link, then just return */ - status = phy_read(enc, PHY_REG_PHSTAT1); + status = enc_phy_read(enc, PHY_REG_PHSTAT1); if (status & ENC_PHSTAT1_LLSTAT) return 0; #endif @@ -382,10 +382,10 @@ static int enc_phy_link_wait(enc_dev_t *enc) /* wait for link with 1 second timeout */ etime = get_ticks() + get_tbclk(); while (get_ticks() <= etime) { - status = phy_read(enc, PHY_REG_PHSTAT1); + status = enc_phy_read(enc, PHY_REG_PHSTAT1); if (status & ENC_PHSTAT1_LLSTAT) { /* now we have a link */ - status = phy_read(enc, PHY_REG_PHSTAT2); + status = enc_phy_read(enc, PHY_REG_PHSTAT2); duplex = (status & ENC_PHSTAT2_DPXSTAT) ? 1 : 0; printf("%s: link up, 10Mbps %s-duplex\n", enc->dev->name, duplex ? "full" : "half"); @@ -678,8 +678,8 @@ static int enc_setup(enc_dev_t *enc) enc->bank = 0xff; /* invalidate current bank in enc28j60 */ /* verify PHY identification */ - phid1 = phy_read(enc, PHY_REG_PHID1); - phid2 = phy_read(enc, PHY_REG_PHID2) & ENC_PHID2_MASK; + phid1 = enc_phy_read(enc, PHY_REG_PHID1); + phid2 = enc_phy_read(enc, PHY_REG_PHID2) & ENC_PHID2_MASK; if (phid1 != ENC_PHID1_VALUE || phid2 != ENC_PHID2_VALUE) { printf("%s: failed to identify PHY. Found %04x:%04x\n", enc->dev->name, phid1, phid2); @@ -694,7 +694,7 @@ static int enc_setup(enc_dev_t *enc) * Prevent automatic loopback of data beeing transmitted by setting * ENC_PHCON2_HDLDIS */ - phy_write(enc, PHY_REG_PHCON2, (1<<8)); + enc_phy_write(enc, PHY_REG_PHCON2, (1<<8)); /* * LEDs configuration @@ -702,10 +702,10 @@ static int enc_setup(enc_dev_t *enc) * LEDB: LBCFG = 0111 -> display TX & RX activity * STRCH = 1 -> LED pulses */ - phy_write(enc, PHY_REG_PHLCON, 0x0472); + enc_phy_write(enc, PHY_REG_PHLCON, 0x0472); /* Reset PDPXMD-bit => half duplex */ - phy_write(enc, PHY_REG_PHCON1, 0); + enc_phy_write(enc, PHY_REG_PHCON1, 0); #ifdef CONFIG_USE_IRQ /* enable interrupts */ @@ -771,7 +771,7 @@ int enc_miiphy_read(const char *devname, u8 phy_adr, u8 reg, u16 *value) enc_release_bus(enc); return -1; } - *value = phy_read(enc, reg); + *value = enc_phy_read(enc, reg); enc_release_bus(enc); return 0; } @@ -796,7 +796,7 @@ int enc_miiphy_write(const char *devname, u8 phy_adr, u8 reg, u16 value) enc_release_bus(enc); return -1; } - phy_write(enc, reg, value); + enc_phy_write(enc, reg, value); enc_release_bus(enc); return 0; } diff --git a/drivers/net/fsl_mdio.c b/drivers/net/fsl_mdio.c new file mode 100644 index 0000000..1aab307 --- /dev/null +++ b/drivers/net/fsl_mdio.c @@ -0,0 +1,120 @@ +/* + * Copyright 2009-2010 Freescale Semiconductor, Inc. + * Jun-jie Zhang <b18070@freescale.com> + * Mingkai Hu <Mingkai.hu@freescale.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <miiphy.h> +#include <phy.h> +#include <fsl_mdio.h> +#include <asm/io.h> +#include <asm/errno.h> +#include <asm/fsl_enet.h> + +void tsec_local_mdio_write(struct tsec_mii_mng *phyregs, int port_addr, + int dev_addr, int regnum, int value) +{ + int timeout = 1000000; + + out_be32(&phyregs->miimadd, (port_addr << 8) | (regnum & 0x1f)); + out_be32(&phyregs->miimcon, value); + asm("sync"); + + while ((in_be32(&phyregs->miimind) & MIIMIND_BUSY) && timeout--) + ; +} + +int tsec_local_mdio_read(struct tsec_mii_mng *phyregs, int port_addr, + int dev_addr, int regnum) +{ + int value; + int timeout = 1000000; + + /* Put the address of the phy, and the register + * number into MIIMADD */ + out_be32(&phyregs->miimadd, (port_addr << 8) | (regnum & 0x1f)); + + /* Clear the command register, and wait */ + out_be32(&phyregs->miimcom, 0); + asm("sync"); + + /* Initiate a read command, and wait */ + out_be32(&phyregs->miimcom, MIIMCOM_READ_CYCLE); + asm("sync"); + + /* Wait for the the indication that the read is done */ + while ((in_be32(&phyregs->miimind) & (MIIMIND_NOTVALID | MIIMIND_BUSY)) + && timeout--) + ; + + /* Grab the value read from the PHY */ + value = in_be32(&phyregs->miimstat); + + return value; +} + +static int fsl_pq_mdio_reset(struct mii_dev *bus) +{ + struct tsec_mii_mng *regs = bus->priv; + + /* Reset MII (due to new addresses) */ + out_be32(®s->miimcfg, MIIMCFG_RESET_MGMT); + + out_be32(®s->miimcfg, MIIMCFG_INIT_VALUE); + + while (in_be32(®s->miimind) & MIIMIND_BUSY) + ; + + return 0; +} + +int tsec_phy_read(struct mii_dev *bus, int addr, int dev_addr, int regnum) +{ + struct tsec_mii_mng *phyregs = bus->priv; + + return tsec_local_mdio_read(phyregs, addr, dev_addr, regnum); +} + +int tsec_phy_write(struct mii_dev *bus, int addr, int dev_addr, int regnum, + u16 value) +{ + struct tsec_mii_mng *phyregs = bus->priv; + + tsec_local_mdio_write(phyregs, addr, dev_addr, regnum, value); + + return 0; +} + +int fsl_pq_mdio_init(bd_t *bis, struct fsl_pq_mdio_info *info) +{ + struct mii_dev *bus = mdio_alloc(); + + if (!bus) { + printf("Failed to allocate FSL MDIO bus\n"); + return -1; + } + + bus->read = tsec_phy_read; + bus->write = tsec_phy_write; + bus->reset = fsl_pq_mdio_reset; + sprintf(bus->name, info->name); + + bus->priv = info->regs; + + return mdio_register(bus); +} diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile index bba8901..a59834b 100644 --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile @@ -28,6 +28,19 @@ LIB := $(obj)libphy.o COBJS-$(CONFIG_BITBANGMII) += miiphybb.o COBJS-$(CONFIG_MV88E61XX_SWITCH) += mv88e61xx.o +COBJS-$(CONFIG_PHYLIB) += phy.o +COBJS-$(CONFIG_PHYLIB_10G) += generic_10g.o +COBJS-$(CONFIG_PHY_ATHEROS) += atheros.o +COBJS-$(CONFIG_PHY_BROADCOM) += broadcom.o +COBJS-$(CONFIG_PHY_DAVICOM) += davicom.o +COBJS-$(CONFIG_PHY_LXT) += lxt.o +COBJS-$(CONFIG_PHY_MARVELL) += marvell.o +COBJS-$(CONFIG_PHY_MICREL) += micrel.o +COBJS-$(CONFIG_PHY_NATSEMI) += natsemi.o +COBJS-$(CONFIG_PHY_REALTEK) += realtek.o +COBJS-$(CONFIG_PHY_TERANETICS) += teranetics.o +COBJS-$(CONFIG_PHY_VITESSE) += vitesse.o + COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/drivers/net/phy/atheros.c b/drivers/net/phy/atheros.c new file mode 100644 index 0000000..798473d --- /dev/null +++ b/drivers/net/phy/atheros.c @@ -0,0 +1,48 @@ +/* + * Atheros PHY drivers + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * Copyright 2011 Freescale Semiconductor, Inc. + * author Andy Fleming + * + */ +#include <phy.h> + +static int ar8021_config(struct phy_device *phydev) +{ + phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x05); + phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x3D47); + + return 0; +} + +struct phy_driver AR8021_driver = { + .name = "AR8021", + .uid = 0x4dd040, + .mask = 0xfffff0, + .features = PHY_GBIT_FEATURES, + .config = ar8021_config, + .startup = genphy_startup, + .shutdown = genphy_shutdown, +}; + +int phy_atheros_init(void) +{ + phy_register(&AR8021_driver); + + return 0; +} diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c new file mode 100644 index 0000000..427ac60 --- /dev/null +++ b/drivers/net/phy/broadcom.c @@ -0,0 +1,288 @@ +/* + * Broadcom PHY drivers + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * Copyright 2010-2011 Freescale Semiconductor, Inc. + * author Andy Fleming + * + */ +#include <config.h> +#include <common.h> +#include <phy.h> + +/* Broadcom BCM54xx -- taken from linux sungem_phy */ +#define MIIM_BCM54xx_AUXCNTL 0x18 +#define MIIM_BCM54xx_AUXCNTL_ENCODE(val) (((val & 0x7) << 12)|(val & 0x7)) +#define MIIM_BCM54xx_AUXSTATUS 0x19 +#define MIIM_BCM54xx_AUXSTATUS_LINKMODE_MASK 0x0700 +#define MIIM_BCM54xx_AUXSTATUS_LINKMODE_SHIFT 8 + +#define MIIM_BCM54XX_SHD 0x1c +#define MIIM_BCM54XX_SHD_WRITE 0x8000 +#define MIIM_BCM54XX_SHD_VAL(x) ((x & 0x1f) << 10) +#define MIIM_BCM54XX_SHD_DATA(x) ((x & 0x3ff) << 0) +#define MIIM_BCM54XX_SHD_WR_ENCODE(val, data) \ + (MIIM_BCM54XX_SHD_WRITE | MIIM_BCM54XX_SHD_VAL(val) | \ + MIIM_BCM54XX_SHD_DATA(data)) + +#define MIIM_BCM54XX_EXP_DATA 0x15 /* Expansion register data */ +#define MIIM_BCM54XX_EXP_SEL 0x17 /* Expansion register select */ +#define MIIM_BCM54XX_EXP_SEL_SSD 0x0e00 /* Secondary SerDes select */ +#define MIIM_BCM54XX_EXP_SEL_ER 0x0f00 /* Expansion register select */ + +/* Broadcom BCM5461S */ +static int bcm5461_config(struct phy_device *phydev) +{ + genphy_config_aneg(phydev); + + phy_reset(phydev); + + return 0; +} + +static int bcm54xx_parse_status(struct phy_device *phydev) +{ + unsigned int mii_reg; + + mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_BCM54xx_AUXSTATUS); + + switch ((mii_reg & MIIM_BCM54xx_AUXSTATUS_LINKMODE_MASK) >> + MIIM_BCM54xx_AUXSTATUS_LINKMODE_SHIFT) { + case 1: + phydev->duplex = DUPLEX_HALF; + phydev->speed = SPEED_10; + break; + case 2: + phydev->duplex = DUPLEX_FULL; + phydev->speed = SPEED_10; + break; + case 3: + phydev->duplex = DUPLEX_HALF; + phydev->speed = SPEED_100; + break; + case 5: + phydev->duplex = DUPLEX_FULL; + phydev->speed = SPEED_100; + break; + case 6: + phydev->duplex = DUPLEX_HALF; + phydev->speed = SPEED_1000; + break; + case 7: + phydev->duplex = DUPLEX_FULL; + phydev->speed = SPEED_1000; + break; + default: + printf("Auto-neg error, defaulting to 10BT/HD\n"); + phydev->duplex = DUPLEX_HALF; + phydev->speed = SPEED_10; + break; + } + + return 0; +} + +static int bcm54xx_startup(struct phy_device *phydev) +{ + /* Read the Status (2x to make sure link is right) */ + genphy_update_link(phydev); + bcm54xx_parse_status(phydev); + + return 0; +} + +/* Broadcom BCM5482S */ +/* + * "Ethernet@Wirespeed" needs to be enabled to achieve link in certain + * circumstances. eg a gigabit TSEC connected to a gigabit switch with + * a 4-wire ethernet cable. Both ends advertise gigabit, but can't + * link. "Ethernet@Wirespeed" reduces advertised speed until link + * can be achieved. + */ +static u32 bcm5482_read_wirespeed(struct phy_device *phydev, u32 reg) +{ + return (phy_read(phydev, MDIO_DEVAD_NONE, reg) & 0x8FFF) | 0x8010; +} + +static int bcm5482_config(struct phy_device *phydev) +{ + unsigned int reg; + + /* reset the PHY */ + reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMCR); + reg |= BMCR_RESET; + phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, reg); + + /* Setup read from auxilary control shadow register 7 */ + phy_write(phydev, MDIO_DEVAD_NONE, MIIM_BCM54xx_AUXCNTL, + MIIM_BCM54xx_AUXCNTL_ENCODE(7)); + /* Read Misc Control register and or in Ethernet@Wirespeed */ + reg = bcm5482_read_wirespeed(phydev, MIIM_BCM54xx_AUXCNTL); + phy_write(phydev, MDIO_DEVAD_NONE, MIIM_BCM54xx_AUXCNTL, reg); + + /* Initial config/enable of secondary SerDes interface */ + phy_write(phydev, MDIO_DEVAD_NONE, MIIM_BCM54XX_SHD, + MIIM_BCM54XX_SHD_WR_ENCODE(0x14, 0xf)); + /* Write intial value to secondary SerDes Contol */ + phy_write(phydev, MDIO_DEVAD_NONE, MIIM_BCM54XX_EXP_SEL, + MIIM_BCM54XX_EXP_SEL_SSD | 0); + phy_write(phydev, MDIO_DEVAD_NONE, MIIM_BCM54XX_EXP_DATA, + BMCR_ANRESTART); + /* Enable copper/fiber auto-detect */ + phy_write(phydev, MDIO_DEVAD_NONE, MIIM_BCM54XX_SHD, + MIIM_BCM54XX_SHD_WR_ENCODE(0x1e, 0x201)); + + genphy_config_aneg(phydev); + + return 0; +} + +/* + * Find out if PHY is in copper or serdes mode by looking at Expansion Reg + * 0x42 - "Operating Mode Status Register" + */ +static int bcm5482_is_serdes(struct phy_device *phydev) +{ + u16 val; + int serdes = 0; + + phy_write(phydev, MDIO_DEVAD_NONE, MIIM_BCM54XX_EXP_SEL, + MIIM_BCM54XX_EXP_SEL_ER | 0x42); + val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_BCM54XX_EXP_DATA); + + switch (val & 0x1f) { + case 0x0d: /* RGMII-to-100Base-FX */ + case 0x0e: /* RGMII-to-SGMII */ + case 0x0f: /* RGMII-to-SerDes */ + case 0x12: /* SGMII-to-SerDes */ + case 0x13: /* SGMII-to-100Base-FX */ + case 0x16: /* SerDes-to-Serdes */ + serdes = 1; + break; + case 0x6: /* RGMII-to-Copper */ + case 0x14: /* SGMII-to-Copper */ + case 0x17: /* SerDes-to-Copper */ + break; + default: + printf("ERROR, invalid PHY mode (0x%x\n)", val); + break; + } + + return serdes; +} + +/* + * Determine SerDes link speed and duplex from Expansion reg 0x42 "Operating + * Mode Status Register" + */ +static u32 bcm5482_parse_serdes_sr(struct phy_device *phydev) +{ + u16 val; + int i = 0; + + /* Wait 1s for link - Clause 37 autonegotiation happens very fast */ + while (1) { + phy_write(phydev, MDIO_DEVAD_NONE, MIIM_BCM54XX_EXP_SEL, + MIIM_BCM54XX_EXP_SEL_ER | 0x42); + val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_BCM54XX_EXP_DATA); + + if (val & 0x8000) + break; + + if (i++ > 1000) { + phydev->link = 0; + return 1; + } + + udelay(1000); /* 1 ms */ + } + + phydev->link = 1; + switch ((val >> 13) & 0x3) { + case (0x00): + phydev->speed = 10; + break; + case (0x01): + phydev->speed = 100; + break; + case (0x02): + phydev->speed = 1000; + break; + } + + phydev->duplex = (val & 0x1000) == 0x1000; + + return 0; +} + +/* + * Figure out if BCM5482 is in serdes or copper mode and determine link + * configuration accordingly + */ +static int bcm5482_startup(struct phy_device *phydev) +{ + if (bcm5482_is_serdes(phydev)) { + bcm5482_parse_serdes_sr(phydev); + phydev->port = PORT_FIBRE; + } else { + /* Wait for auto-negotiation to complete or fail */ + genphy_update_link(phydev); + /* Parse BCM54xx copper aux status register */ + bcm54xx_parse_status(phydev); + } + + return 0; +} + +static struct phy_driver BCM5461S_driver = { + .name = "Broadcom BCM5461S", + .uid = 0x2060c0, + .mask = 0xfffff0, + .features = PHY_GBIT_FEATURES, + .config = &bcm5461_config, + .startup = &bcm54xx_startup, + .shutdown = &genphy_shutdown, +}; + +static struct phy_driver BCM5464S_driver = { + .name = "Broadcom BCM5464S", + .uid = 0x2060b0, + .mask = 0xfffff0, + .features = PHY_GBIT_FEATURES, + .config = &bcm5461_config, + .startup = &bcm54xx_startup, + .shutdown = &genphy_shutdown, +}; + +static struct phy_driver BCM5482S_driver = { + .name = "Broadcom BCM5482S", + .uid = 0x143bcb0, + .mask = 0xffffff0, + .features = PHY_GBIT_FEATURES, + .config = &bcm5482_config, + .startup = &bcm5482_startup, + .shutdown = &genphy_shutdown, +}; + +int phy_broadcom_init(void) +{ + phy_register(&BCM5482S_driver); + phy_register(&BCM5464S_driver); + phy_register(&BCM5461S_driver); + + return 0; +} diff --git a/drivers/net/phy/davicom.c b/drivers/net/phy/davicom.c new file mode 100644 index 0000000..e96a4af --- /dev/null +++ b/drivers/net/phy/davicom.c @@ -0,0 +1,98 @@ +/* + * Davicom PHY drivers + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * Copyright 2010-2011 Freescale Semiconductor, Inc. + * author Andy Fleming + * + */ +#include <phy.h> + +#define MIIM_DM9161_SCR 0x10 +#define MIIM_DM9161_SCR_INIT 0x0610 + +/* DM9161 Specified Configuration and Status Register */ +#define MIIM_DM9161_SCSR 0x11 +#define MIIM_DM9161_SCSR_100F 0x8000 +#define MIIM_DM9161_SCSR_100H 0x4000 +#define MIIM_DM9161_SCSR_10F 0x2000 +#define MIIM_DM9161_SCSR_10H 0x1000 + +/* DM9161 10BT Configuration/Status */ +#define MIIM_DM9161_10BTCSR 0x12 +#define MIIM_DM9161_10BTCSR_INIT 0x7800 + + +/* Davicom DM9161E */ +static int dm9161_config(struct phy_device *phydev) +{ + phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, BMCR_ISOLATE); + /* Do not bypass the scrambler/descrambler */ + phy_write(phydev, MDIO_DEVAD_NONE, MIIM_DM9161_SCR, + MIIM_DM9161_SCR_INIT); + /* Clear 10BTCSR to default */ + phy_write(phydev, MDIO_DEVAD_NONE, MIIM_DM9161_10BTCSR, + MIIM_DM9161_10BTCSR_INIT); + + genphy_config_aneg(phydev); + + return 0; +} + +static int dm9161_parse_status(struct phy_device *phydev) +{ + int mii_reg; + + mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_DM9161_SCSR); + + if (mii_reg & (MIIM_DM9161_SCSR_100F | MIIM_DM9161_SCSR_100H)) + phydev->speed = SPEED_100; + else + phydev->speed = SPEED_10; + + if (mii_reg & (MIIM_DM9161_SCSR_100F | MIIM_DM9161_SCSR_10F)) + phydev->duplex = DUPLEX_FULL; + else + phydev->duplex = DUPLEX_HALF; + + return 0; +} + +static int dm9161_startup(struct phy_device *phydev) +{ + genphy_update_link(phydev); + dm9161_parse_status(phydev); + + return 0; +} + +static struct phy_driver DM9161_driver = { + .name = "Davicom DM9161E", + .uid = 0x181b880, + .mask = 0xffffff0, + .features = PHY_BASIC_FEATURES, + .config = &dm9161_config, + .startup = &dm9161_startup, + .shutdown = &genphy_shutdown, +}; + +int phy_davicom_init(void) +{ + phy_register(&DM9161_driver); + + return 0; +} diff --git a/drivers/net/phy/generic_10g.c b/drivers/net/phy/generic_10g.c new file mode 100644 index 0000000..315c508 --- /dev/null +++ b/drivers/net/phy/generic_10g.c @@ -0,0 +1,105 @@ +/* + * Generic PHY Management code + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * + * Copyright 2011 Freescale Semiconductor, Inc. + * author Andy Fleming + * + * Based loosely off of Linux's PHY Lib + */ + +#include <config.h> +#include <common.h> +#include <miiphy.h> +#include <phy.h> + +int gen10g_shutdown(struct phy_device *phydev) +{ + return 0; +} + +int gen10g_startup(struct phy_device *phydev) +{ + int devad, reg; + u32 mmd_mask = phydev->mmds; + + phydev->link = 1; + + /* For now just lie and say it's 10G all the time */ + phydev->speed = SPEED_10000; + phydev->duplex = DUPLEX_FULL; + + for (devad = 0; mmd_mask; devad++, mmd_mask = mmd_mask >> 1) { + if (!mmd_mask & 1) + continue; + + /* Read twice because link state is latched and a + * read moves the current state into the register */ + phy_read(phydev, devad, MDIO_STAT1); + reg = phy_read(phydev, devad, MDIO_STAT1); + if (reg < 0 || !(reg & MDIO_STAT1_LSTATUS)) + phydev->link = 0; + } + + return 0; +} + +int gen10g_discover_mmds(struct phy_device *phydev) +{ + int mmd, stat2, devs1, devs2; + + /* Assume PHY must have at least one of PMA/PMD, WIS, PCS, PHY + * XS or DTE XS; give up if none is present. */ + for (mmd = 1; mmd <= 5; mmd++) { + /* Is this MMD present? */ + stat2 = phy_read(phydev, mmd, MDIO_STAT2); + if (stat2 < 0 || + (stat2 & MDIO_STAT2_DEVPRST) != MDIO_STAT2_DEVPRST_VAL) + continue; + + /* It should tell us about all the other MMDs */ + devs1 = phy_read(phydev, mmd, MDIO_DEVS1); + devs2 = phy_read(phydev, mmd, MDIO_DEVS2); + if (devs1 < 0 || devs2 < 0) + continue; + + phydev->mmds = devs1 | (devs2 << 16); + return 0; + } + + return 0; +} + +int gen10g_config(struct phy_device *phydev) +{ + /* For now, assume 10000baseT. Fill in later */ + phydev->supported = phydev->advertising = SUPPORTED_10000baseT_Full; + + return gen10g_discover_mmds(phydev); +} + +struct phy_driver gen10g_driver = { + .uid = 0xffffffff, + .mask = 0xffffffff, + .name = "Generic 10G PHY", + .features = 0, + .config = gen10g_config, + .startup = gen10g_startup, + .shutdown = gen10g_shutdown, +}; + diff --git a/drivers/net/phy/lxt.c b/drivers/net/phy/lxt.c new file mode 100644 index 0000000..d67bbdd --- /dev/null +++ b/drivers/net/phy/lxt.c @@ -0,0 +1,87 @@ +/* + * LXT PHY drivers + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * Copyright 2010-2011 Freescale Semiconductor, Inc. + * author Andy Fleming + * + */ +#include <phy.h> + +/* LXT971 Status 2 registers */ +#define MIIM_LXT971_SR2 0x11 /* Status Register 2 */ +#define MIIM_LXT971_SR2_SPEED_MASK 0x4200 +#define MIIM_LXT971_SR2_10HDX 0x0000 /* 10 Mbit half duplex selected */ +#define MIIM_LXT971_SR2_10FDX 0x0200 /* 10 Mbit full duplex selected */ +#define MIIM_LXT971_SR2_100HDX 0x4000 /* 100 Mbit half duplex selected */ +#define MIIM_LXT971_SR2_100FDX 0x4200 /* 100 Mbit full duplex selected */ + + +/* LXT971 */ +static int lxt971_parse_status(struct phy_device *phydev) +{ + int mii_reg; + int speed; + + mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_LXT971_SR2); + speed = mii_reg & MIIM_LXT971_SR2_SPEED_MASK; + + switch (speed) { + case MIIM_LXT971_SR2_10HDX: + phydev->speed = SPEED_10; + phydev->duplex = DUPLEX_HALF; + break; + case MIIM_LXT971_SR2_10FDX: + phydev->speed = SPEED_10; + phydev->duplex = DUPLEX_FULL; + break; + case MIIM_LXT971_SR2_100HDX: + phydev->speed = SPEED_100; + phydev->duplex = DUPLEX_HALF; + break; + default: + phydev->speed = SPEED_100; + phydev->duplex = DUPLEX_FULL; + } + + return 0; +} + +static int lxt971_startup(struct phy_device *phydev) +{ + genphy_update_link(phydev); + lxt971_parse_status(phydev); + + return 0; +} + +static struct phy_driver LXT971_driver = { + .name = "LXT971", + .uid = 0x1378e0, + .mask = 0xfffff0, + .features = PHY_BASIC_FEATURES, + .config = &genphy_config_aneg, + .startup = &lxt971_startup, + .shutdown = &genphy_shutdown, +}; + +int phy_lxt_init(void) +{ + phy_register(&LXT971_driver); + + return 0; +} diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c new file mode 100644 index 0000000..bd1cdc4 --- /dev/null +++ b/drivers/net/phy/marvell.c @@ -0,0 +1,367 @@ +/* + * Marvell PHY drivers + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * Copyright 2010-2011 Freescale Semiconductor, Inc. + * author Andy Fleming + * + */ +#include <config.h> +#include <common.h> +#include <phy.h> + +#define PHY_AUTONEGOTIATE_TIMEOUT 5000 + +/* 88E1011 PHY Status Register */ +#define MIIM_88E1xxx_PHY_STATUS 0x11 +#define MIIM_88E1xxx_PHYSTAT_SPEED 0xc000 +#define MIIM_88E1xxx_PHYSTAT_GBIT 0x8000 +#define MIIM_88E1xxx_PHYSTAT_100 0x4000 +#define MIIM_88E1xxx_PHYSTAT_DUPLEX 0x2000 +#define MIIM_88E1xxx_PHYSTAT_SPDDONE 0x0800 +#define MIIM_88E1xxx_PHYSTAT_LINK 0x0400 + +#define MIIM_88E1xxx_PHY_SCR 0x10 +#define MIIM_88E1xxx_PHY_MDI_X_AUTO 0x0060 + +/* 88E1111 PHY LED Control Register */ +#define MIIM_88E1111_PHY_LED_CONTROL 24 +#define MIIM_88E1111_PHY_LED_DIRECT 0x4100 +#define MIIM_88E1111_PHY_LED_COMBINE 0x411C + +/* 88E1118 PHY defines */ +#define MIIM_88E1118_PHY_PAGE 22 +#define MIIM_88E1118_PHY_LED_PAGE 3 + +/* 88E1121 PHY LED Control Register */ +#define MIIM_88E1121_PHY_LED_CTRL 16 +#define MIIM_88E1121_PHY_LED_PAGE 3 +#define MIIM_88E1121_PHY_LED_DEF 0x0030 + +/* 88E1121 PHY IRQ Enable/Status Register */ +#define MIIM_88E1121_PHY_IRQ_EN 18 +#define MIIM_88E1121_PHY_IRQ_STATUS 19 + +#define MIIM_88E1121_PHY_PAGE 22 + +/* 88E1145 Extended PHY Specific Control Register */ +#define MIIM_88E1145_PHY_EXT_CR 20 +#define MIIM_M88E1145_RGMII_RX_DELAY 0x0080 +#define MIIM_M88E1145_RGMII_TX_DELAY 0x0002 + +#define MIIM_88E1145_PHY_LED_CONTROL 24 +#define MIIM_88E1145_PHY_LED_DIRECT 0x4100 + +#define MIIM_88E1145_PHY_PAGE 29 +#define MIIM_88E1145_PHY_CAL_OV 30 + +#define MIIM_88E1149_PHY_PAGE 29 + +/* Marvell 88E1011S */ +static int m88e1011s_config(struct phy_device *phydev) +{ + /* Reset and configure the PHY */ + phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, BMCR_RESET); + + phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x1f); + phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x200c); + phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x5); + phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0); + phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x100); + + phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, BMCR_RESET); + + genphy_config_aneg(phydev); + + return 0; +} + +/* Parse the 88E1011's status register for speed and duplex + * information + */ +static uint m88e1xxx_parse_status(struct phy_device *phydev) +{ + unsigned int speed; + unsigned int mii_reg; + + mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_88E1xxx_PHY_STATUS); + + if ((mii_reg & MIIM_88E1xxx_PHYSTAT_LINK) && + !(mii_reg & MIIM_88E1xxx_PHYSTAT_SPDDONE)) { + int i = 0; + + puts("Waiting for PHY realtime link"); + while (!(mii_reg & MIIM_88E1xxx_PHYSTAT_SPDDONE)) { + /* Timeout reached ? */ + if (i > PHY_AUTONEGOTIATE_TIMEOUT) { + puts(" TIMEOUT !\n"); + phydev->link = 0; + break; + } + + if ((i++ % 1000) == 0) + putc('.'); + udelay(1000); + mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, + MIIM_88E1xxx_PHY_STATUS); + } + puts(" done\n"); + udelay(500000); /* another 500 ms (results in faster booting) */ + } else { + if (mii_reg & MIIM_88E1xxx_PHYSTAT_LINK) + phydev->link = 1; + else + phydev->link = 0; + } + + if (mii_reg & MIIM_88E1xxx_PHYSTAT_DUPLEX) + phydev->duplex = DUPLEX_FULL; + else + phydev->duplex = DUPLEX_HALF; + + speed = mii_reg & MIIM_88E1xxx_PHYSTAT_SPEED; + + switch (speed) { + case MIIM_88E1xxx_PHYSTAT_GBIT: + phydev->speed = SPEED_1000; + break; + case MIIM_88E1xxx_PHYSTAT_100: + phydev->speed = SPEED_100; + break; + default: + phydev->speed = SPEED_10; + break; + } + + return 0; +} + +static int m88e1011s_startup(struct phy_device *phydev) +{ + genphy_update_link(phydev); + m88e1xxx_parse_status(phydev); + + return 0; +} + +/* Marvell 88E1111S */ +static int m88e1111s_config(struct phy_device *phydev) +{ + int reg; + + if ((phydev->interface == PHY_INTERFACE_MODE_RGMII) || + (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) || + (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) || + (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)) { + reg = phy_read(phydev, MDIO_DEVAD_NONE, 0x1b); + reg = (reg & 0xfff0) | 0xb; + phy_write(phydev, MDIO_DEVAD_NONE, 0x1b, reg); + } else { + phy_write(phydev, MDIO_DEVAD_NONE, 0x1b, 0x1f); + } + + phy_write(phydev, MDIO_DEVAD_NONE, 0x14, 0x0cd2); + + genphy_config_aneg(phydev); + + phy_reset(phydev); + + return 0; +} + +/* Marvell 88E1118 */ +static int m88e1118_config(struct phy_device *phydev) +{ + /* Change Page Number */ + phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1118_PHY_PAGE, 0x0002); + /* Delay RGMII TX and RX */ + phy_write(phydev, MDIO_DEVAD_NONE, 0x15, 0x1070); + /* Change Page Number */ + phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1118_PHY_PAGE, 0x0003); + /* Adjust LED control */ + phy_write(phydev, MDIO_DEVAD_NONE, 0x10, 0x021e); + /* Change Page Number */ + phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1118_PHY_PAGE, 0x0000); + + genphy_config_aneg(phydev); + + phy_reset(phydev); + + return 0; +} + +static int m88e1118_startup(struct phy_device *phydev) +{ + /* Change Page Number */ + phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1118_PHY_PAGE, 0x0000); + + genphy_update_link(phydev); + m88e1xxx_parse_status(phydev); + + return 0; +} + +/* Marvell 88E1121R */ +static int m88e1121_config(struct phy_device *phydev) +{ + int pg; + + /* Configure the PHY */ + genphy_config_aneg(phydev); + + /* Switch the page to access the led register */ + pg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_88E1121_PHY_PAGE); + phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1121_PHY_PAGE, + MIIM_88E1121_PHY_LED_PAGE); + /* Configure leds */ + phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1121_PHY_LED_CTRL, + MIIM_88E1121_PHY_LED_DEF); + /* Restore the page pointer */ + phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1121_PHY_PAGE, pg); + + /* Disable IRQs and de-assert interrupt */ + phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1121_PHY_IRQ_EN, 0); + phy_read(phydev, MDIO_DEVAD_NONE, MIIM_88E1121_PHY_IRQ_STATUS); + + return 0; +} + +/* Marvell 88E1145 */ +static int m88e1145_config(struct phy_device *phydev) +{ + int reg; + + /* Errata E0, E1 */ + phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1145_PHY_PAGE, 0x001b); + phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1145_PHY_CAL_OV, 0x418f); + phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1145_PHY_PAGE, 0x0016); + phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1145_PHY_CAL_OV, 0xa2da); + + phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1xxx_PHY_SCR, + MIIM_88E1xxx_PHY_MDI_X_AUTO); + + reg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_88E1145_PHY_EXT_CR); + if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) + reg |= MIIM_M88E1145_RGMII_RX_DELAY | + MIIM_M88E1145_RGMII_TX_DELAY; + phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1145_PHY_EXT_CR, reg); + + genphy_config_aneg(phydev); + + phy_reset(phydev); + + return 0; +} + +static int m88e1145_startup(struct phy_device *phydev) +{ + genphy_update_link(phydev); + phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1145_PHY_LED_CONTROL, + MIIM_88E1145_PHY_LED_DIRECT); + m88e1xxx_parse_status(phydev); + + return 0; +} + +/* Marvell 88E1149S */ +static int m88e1149_config(struct phy_device *phydev) +{ + phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1149_PHY_PAGE, 0x1f); + phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x200c); + phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1149_PHY_PAGE, 0x5); + phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x0); + phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x100); + + genphy_config_aneg(phydev); + + phy_reset(phydev); + + return 0; +} + + +static struct phy_driver M88E1011S_driver = { + .name = "Marvell 88E1011S", + .uid = 0x1410c60, + .mask = 0xffffff0, + .features = PHY_GBIT_FEATURES, + .config = &m88e1011s_config, + .startup = &m88e1011s_startup, + .shutdown = &genphy_shutdown, +}; + +static struct phy_driver M88E1111S_driver = { + .name = "Marvell 88E1111S", + .uid = 0x1410cc0, + .mask = 0xffffff0, + .features = PHY_GBIT_FEATURES, + .config = &m88e1111s_config, + .startup = &m88e1011s_startup, + .shutdown = &genphy_shutdown, +}; + +static struct phy_driver M88E1118_driver = { + .name = "Marvell 88E1118", + .uid = 0x1410e10, + .mask = 0xffffff0, + .features = PHY_GBIT_FEATURES, + .config = &m88e1118_config, + .startup = &m88e1118_startup, + .shutdown = &genphy_shutdown, +}; + +static struct phy_driver M88E1121R_driver = { + .name = "Marvell 88E1121R", + .uid = 0x1410cb0, + .mask = 0xffffff0, + .features = PHY_GBIT_FEATURES, + .config = &m88e1121_config, + .startup = &genphy_startup, + .shutdown = &genphy_shutdown, +}; + +static struct phy_driver M88E1145_driver = { + .name = "Marvell 88E1145", + .uid = 0x1410cd0, + .mask = 0xffffff0, + .features = PHY_GBIT_FEATURES, + .config = &m88e1145_config, + .startup = &m88e1145_startup, + .shutdown = &genphy_shutdown, +}; + +static struct phy_driver M88E1149S_driver = { + .name = "Marvell 88E1149S", + .uid = 0x1410ca0, + .mask = 0xffffff0, + .features = PHY_GBIT_FEATURES, + .config = &m88e1149_config, + .startup = &m88e1011s_startup, + .shutdown = &genphy_shutdown, +}; + +int phy_marvell_init(void) +{ + phy_register(&M88E1149S_driver); + phy_register(&M88E1145_driver); + phy_register(&M88E1121R_driver); + phy_register(&M88E1118_driver); + phy_register(&M88E1111S_driver); + phy_register(&M88E1011S_driver); + + return 0; +} diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c new file mode 100644 index 0000000..47064a1 --- /dev/null +++ b/drivers/net/phy/micrel.c @@ -0,0 +1,40 @@ +/* + * Micrel PHY drivers + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * Copyright 2010-2011 Freescale Semiconductor, Inc. + * author Andy Fleming + * + */ +#include <phy.h> + +static struct phy_driver KSZ804_driver = { + .name = "Micrel KSZ804", + .uid = 0x221510, + .mask = 0xfffff0, + .features = PHY_BASIC_FEATURES, + .config = &genphy_config, + .startup = &genphy_startup, + .shutdown = &genphy_shutdown, +}; + +int phy_micrel_init(void) +{ + phy_register(&KSZ804_driver); + + return 0; +} diff --git a/drivers/net/phy/natsemi.c b/drivers/net/phy/natsemi.c new file mode 100644 index 0000000..ea60ac1 --- /dev/null +++ b/drivers/net/phy/natsemi.c @@ -0,0 +1,96 @@ +/* + * National Semiconductor PHY drivers + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * Copyright 2010-2011 Freescale Semiconductor, Inc. + * author Andy Fleming + * + */ +#include <phy.h> + +/* DP83865 Link and Auto-Neg Status Register */ +#define MIIM_DP83865_LANR 0x11 +#define MIIM_DP83865_SPD_MASK 0x0018 +#define MIIM_DP83865_SPD_1000 0x0010 +#define MIIM_DP83865_SPD_100 0x0008 +#define MIIM_DP83865_DPX_FULL 0x0002 + + +/* NatSemi DP83865 */ +static int dp83865_config(struct phy_device *phydev) +{ + phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, BMCR_RESET); + genphy_config_aneg(phydev); + + return 0; +} + +static int dp83865_parse_status(struct phy_device *phydev) +{ + int mii_reg; + + mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_DP83865_LANR); + + switch (mii_reg & MIIM_DP83865_SPD_MASK) { + + case MIIM_DP83865_SPD_1000: + phydev->speed = SPEED_1000; + break; + + case MIIM_DP83865_SPD_100: + phydev->speed = SPEED_100; + break; + + default: + phydev->speed = SPEED_10; + break; + + } + + if (mii_reg & MIIM_DP83865_DPX_FULL) + phydev->duplex = DUPLEX_FULL; + else + phydev->duplex = DUPLEX_HALF; + + return 0; +} + +static int dp83865_startup(struct phy_device *phydev) +{ + genphy_update_link(phydev); + dp83865_parse_status(phydev); + + return 0; +} + + +static struct phy_driver DP83865_driver = { + .name = "NatSemi DP83865", + .uid = 0x20005c70, + .mask = 0xfffffff0, + .features = PHY_GBIT_FEATURES, + .config = &dp83865_config, + .startup = &dp83865_startup, + .shutdown = &genphy_shutdown, +}; + +int phy_natsemi_init(void) +{ + phy_register(&DP83865_driver); + + return 0; +} diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c new file mode 100644 index 0000000..c7edcc0 --- /dev/null +++ b/drivers/net/phy/phy.c @@ -0,0 +1,755 @@ +/* + * Generic PHY Management code + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * + * Copyright 2011 Freescale Semiconductor, Inc. + * author Andy Fleming + * + * Based loosely off of Linux's PHY Lib + */ + +#include <config.h> +#include <common.h> +#include <malloc.h> +#include <net.h> +#include <command.h> +#include <miiphy.h> +#include <phy.h> +#include <errno.h> + +/* Generic PHY support and helper functions */ + +/** + * genphy_config_advert - sanitize and advertise auto-negotation parameters + * @phydev: target phy_device struct + * + * Description: Writes MII_ADVERTISE with the appropriate values, + * after sanitizing the values to make sure we only advertise + * what is supported. Returns < 0 on error, 0 if the PHY's advertisement + * hasn't changed, and > 0 if it has changed. + */ +int genphy_config_advert(struct phy_device *phydev) +{ + u32 advertise; + int oldadv, adv; + int err, changed = 0; + + /* Only allow advertising what + * this PHY supports */ + phydev->advertising &= phydev->supported; + advertise = phydev->advertising; + + /* Setup standard advertisement */ + oldadv = adv = phy_read(phydev, MDIO_DEVAD_NONE, MII_ADVERTISE); + + if (adv < 0) + return adv; + + adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4 | ADVERTISE_PAUSE_CAP | + ADVERTISE_PAUSE_ASYM); + if (advertise & ADVERTISED_10baseT_Half) + adv |= ADVERTISE_10HALF; + if (advertise & ADVERTISED_10baseT_Full) + adv |= ADVERTISE_10FULL; + if (advertise & ADVERTISED_100baseT_Half) + adv |= ADVERTISE_100HALF; + if (advertise & ADVERTISED_100baseT_Full) + adv |= ADVERTISE_100FULL; + if (advertise & ADVERTISED_Pause) + adv |= ADVERTISE_PAUSE_CAP; + if (advertise & ADVERTISED_Asym_Pause) + adv |= ADVERTISE_PAUSE_ASYM; + + if (adv != oldadv) { + err = phy_write(phydev, MDIO_DEVAD_NONE, MII_ADVERTISE, adv); + + if (err < 0) + return err; + changed = 1; + } + + /* Configure gigabit if it's supported */ + if (phydev->supported & (SUPPORTED_1000baseT_Half | + SUPPORTED_1000baseT_Full)) { + oldadv = adv = phy_read(phydev, MDIO_DEVAD_NONE, MII_CTRL1000); + + if (adv < 0) + return adv; + + adv &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF); + if (advertise & SUPPORTED_1000baseT_Half) + adv |= ADVERTISE_1000HALF; + if (advertise & SUPPORTED_1000baseT_Full) + adv |= ADVERTISE_1000FULL; + + if (adv != oldadv) { + err = phy_write(phydev, MDIO_DEVAD_NONE, MII_CTRL1000, + adv); + + if (err < 0) + return err; + changed = 1; + } + } + + return changed; +} + + +/** + * genphy_setup_forced - configures/forces speed/duplex from @phydev + * @phydev: target phy_device struct + * + * Description: Configures MII_BMCR to force speed/duplex + * to the values in phydev. Assumes that the values are valid. + */ +int genphy_setup_forced(struct phy_device *phydev) +{ + int err; + int ctl = 0; + + phydev->pause = phydev->asym_pause = 0; + + if (SPEED_1000 == phydev->speed) + ctl |= BMCR_SPEED1000; + else if (SPEED_100 == phydev->speed) + ctl |= BMCR_SPEED100; + + if (DUPLEX_FULL == phydev->duplex) + ctl |= BMCR_FULLDPLX; + + err = phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, ctl); + + return err; +} + + +/** + * genphy_restart_aneg - Enable and Restart Autonegotiation + * @phydev: target phy_device struct + */ +int genphy_restart_aneg(struct phy_device *phydev) +{ + int ctl; + + ctl = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMCR); + + if (ctl < 0) + return ctl; + + ctl |= (BMCR_ANENABLE | BMCR_ANRESTART); + + /* Don't isolate the PHY if we're negotiating */ + ctl &= ~(BMCR_ISOLATE); + + ctl = phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, ctl); + + return ctl; +} + + +/** + * genphy_config_aneg - restart auto-negotiation or write BMCR + * @phydev: target phy_device struct + * + * Description: If auto-negotiation is enabled, we configure the + * advertising, and then restart auto-negotiation. If it is not + * enabled, then we write the BMCR. + */ +int genphy_config_aneg(struct phy_device *phydev) +{ + int result; + + if (AUTONEG_ENABLE != phydev->autoneg) + return genphy_setup_forced(phydev); + + result = genphy_config_advert(phydev); + + if (result < 0) /* error */ + return result; + + if (result == 0) { + /* Advertisment hasn't changed, but maybe aneg was never on to + * begin with? Or maybe phy was isolated? */ + int ctl = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMCR); + + if (ctl < 0) + return ctl; + + if (!(ctl & BMCR_ANENABLE) || (ctl & BMCR_ISOLATE)) + result = 1; /* do restart aneg */ + } + + /* Only restart aneg if we are advertising something different + * than we were before. */ + if (result > 0) + result = genphy_restart_aneg(phydev); + + return result; +} + +/** + * genphy_update_link - update link status in @phydev + * @phydev: target phy_device struct + * + * Description: Update the value in phydev->link to reflect the + * current link value. In order to do this, we need to read + * the status register twice, keeping the second value. + */ +int genphy_update_link(struct phy_device *phydev) +{ + unsigned int mii_reg; + + /* + * Wait if the link is up, and autonegotiation is in progress + * (ie - we're capable and it's not done) + */ + mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMSR); + + /* + * If we already saw the link up, and it hasn't gone down, then + * we don't need to wait for autoneg again + */ + if (phydev->link && mii_reg & BMSR_LSTATUS) + return 0; + + if ((mii_reg & BMSR_ANEGCAPABLE) && !(mii_reg & BMSR_ANEGCOMPLETE)) { + int i = 0; + + printf("%s Waiting for PHY auto negotiation to complete", + phydev->dev->name); + while (!(mii_reg & BMSR_ANEGCOMPLETE)) { + /* + * Timeout reached ? + */ + if (i > PHY_ANEG_TIMEOUT) { + printf(" TIMEOUT !\n"); + phydev->link = 0; + return 0; + } + + if (ctrlc()) { + puts("user interrupt!\n"); + phydev->link = 0; + return -EINTR; + } + + if ((i++ % 500) == 0) + printf("."); + + udelay(1000); /* 1 ms */ + mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMSR); + } + printf(" done\n"); + phydev->link = 1; + } else { + /* Read the link a second time to clear the latched state */ + mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMSR); + + if (mii_reg & BMSR_LSTATUS) + phydev->link = 1; + else + phydev->link = 0; + } + + return 0; +} + +/* + * Generic function which updates the speed and duplex. If + * autonegotiation is enabled, it uses the AND of the link + * partner's advertised capabilities and our advertised + * capabilities. If autonegotiation is disabled, we use the + * appropriate bits in the control register. + * + * Stolen from Linux's mii.c and phy_device.c + */ +static int genphy_parse_link(struct phy_device *phydev) +{ + int mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMSR); + + /* We're using autonegotiation */ + if (mii_reg & BMSR_ANEGCAPABLE) { + u32 lpa = 0; + u32 gblpa = 0; + + /* Check for gigabit capability */ + if (mii_reg & BMSR_ERCAP) { + /* We want a list of states supported by + * both PHYs in the link + */ + gblpa = phy_read(phydev, MDIO_DEVAD_NONE, MII_STAT1000); + gblpa &= phy_read(phydev, + MDIO_DEVAD_NONE, MII_CTRL1000) << 2; + } + + /* Set the baseline so we only have to set them + * if they're different + */ + phydev->speed = SPEED_10; + phydev->duplex = DUPLEX_HALF; + + /* Check the gigabit fields */ + if (gblpa & (PHY_1000BTSR_1000FD | PHY_1000BTSR_1000HD)) { + phydev->speed = SPEED_1000; + + if (gblpa & PHY_1000BTSR_1000FD) + phydev->duplex = DUPLEX_FULL; + + /* We're done! */ + return 0; + } + + lpa = phy_read(phydev, MDIO_DEVAD_NONE, MII_ADVERTISE); + lpa &= phy_read(phydev, MDIO_DEVAD_NONE, MII_LPA); + + if (lpa & (LPA_100FULL | LPA_100HALF)) { + phydev->speed = SPEED_100; + + if (lpa & LPA_100FULL) + phydev->duplex = DUPLEX_FULL; + + } else if (lpa & LPA_10FULL) + phydev->duplex = DUPLEX_FULL; + } else { + u32 bmcr = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMCR); + + phydev->speed = SPEED_10; + phydev->duplex = DUPLEX_HALF; + + if (bmcr & BMCR_FULLDPLX) + phydev->duplex = DUPLEX_FULL; + + if (bmcr & BMCR_SPEED1000) + phydev->speed = SPEED_1000; + else if (bmcr & BMCR_SPEED100) + phydev->speed = SPEED_100; + } + + return 0; +} + +int genphy_config(struct phy_device *phydev) +{ + int val; + u32 features; + + /* For now, I'll claim that the generic driver supports + * all possible port types */ + features = (SUPPORTED_TP | SUPPORTED_MII + | SUPPORTED_AUI | SUPPORTED_FIBRE | + SUPPORTED_BNC); + + /* Do we support autonegotiation? */ + val = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMSR); + + if (val < 0) + return val; + + if (val & BMSR_ANEGCAPABLE) + features |= SUPPORTED_Autoneg; + + if (val & BMSR_100FULL) + features |= SUPPORTED_100baseT_Full; + if (val & BMSR_100HALF) + features |= SUPPORTED_100baseT_Half; + if (val & BMSR_10FULL) + features |= SUPPORTED_10baseT_Full; + if (val & BMSR_10HALF) + features |= SUPPORTED_10baseT_Half; + + if (val & BMSR_ESTATEN) { + val = phy_read(phydev, MDIO_DEVAD_NONE, MII_ESTATUS); + + if (val < 0) + return val; + + if (val & ESTATUS_1000_TFULL) + features |= SUPPORTED_1000baseT_Full; + if (val & ESTATUS_1000_THALF) + features |= SUPPORTED_1000baseT_Half; + } + + phydev->supported = features; + phydev->advertising = features; + + genphy_config_aneg(phydev); + + return 0; +} + +int genphy_startup(struct phy_device *phydev) +{ + genphy_update_link(phydev); + genphy_parse_link(phydev); + + return 0; +} + +int genphy_shutdown(struct phy_device *phydev) +{ + return 0; +} + +static struct phy_driver genphy_driver = { + .uid = 0xffffffff, + .mask = 0xffffffff, + .name = "Generic PHY", + .features = 0, + .config = genphy_config, + .startup = genphy_startup, + .shutdown = genphy_shutdown, +}; + +static LIST_HEAD(phy_drivers); + +int phy_init(void) +{ +#ifdef CONFIG_PHY_ATHEROS + phy_atheros_init(); +#endif +#ifdef CONFIG_PHY_BROADCOM + phy_broadcom_init(); +#endif +#ifdef CONFIG_PHY_DAVICOM + phy_davicom_init(); +#endif +#ifdef CONFIG_PHY_LXT + phy_lxt_init(); +#endif +#ifdef CONFIG_PHY_MARVELL + phy_marvell_init(); +#endif +#ifdef CONFIG_PHY_MICREL + phy_micrel_init(); +#endif +#ifdef CONFIG_PHY_NATSEMI + phy_natsemi_init(); +#endif +#ifdef CONFIG_PHY_REALTEK + phy_realtek_init(); +#endif +#ifdef CONFIG_PHY_TERANETICS + phy_teranetics_init(); +#endif +#ifdef CONFIG_PHY_VITESSE + phy_vitesse_init(); +#endif + + return 0; +} + +int phy_register(struct phy_driver *drv) +{ + INIT_LIST_HEAD(&drv->list); + list_add_tail(&drv->list, &phy_drivers); + + return 0; +} + +int phy_probe(struct phy_device *phydev) +{ + int err = 0; + + phydev->advertising = phydev->supported = phydev->drv->features; + phydev->mmds = phydev->drv->mmds; + + if (phydev->drv->probe) + err = phydev->drv->probe(phydev); + + return err; +} + +static struct phy_driver *generic_for_interface(phy_interface_t interface) +{ +#ifdef CONFIG_PHYLIB_10G + if (is_10g_interface(interface)) + return &gen10g_driver; +#endif + + return &genphy_driver; +} + +struct phy_driver *get_phy_driver(struct phy_device *phydev, + phy_interface_t interface) +{ + struct list_head *entry; + int phy_id = phydev->phy_id; + struct phy_driver *drv = NULL; + + list_for_each(entry, &phy_drivers) { + drv = list_entry(entry, struct phy_driver, list); + if ((drv->uid & drv->mask) == (phy_id & drv->mask)) + return drv; + } + + /* If we made it here, there's no driver for this PHY */ + return generic_for_interface(interface); +} + +struct phy_device *phy_device_create(struct mii_dev *bus, int addr, int phy_id, + phy_interface_t interface) +{ + struct phy_device *dev; + + /* We allocate the device, and initialize the + * default values */ + dev = malloc(sizeof(*dev)); + if (!dev) { + printf("Failed to allocate PHY device for %s:%d\n", + bus->name, addr); + return NULL; + } + + memset(dev, 0, sizeof(*dev)); + + dev->duplex = -1; + dev->link = 1; + dev->interface = interface; + + dev->autoneg = AUTONEG_ENABLE; + + dev->addr = addr; + dev->phy_id = phy_id; + dev->bus = bus; + + dev->drv = get_phy_driver(dev, interface); + + phy_probe(dev); + + bus->phymap[addr] = dev; + + return dev; +} + +/** + * get_phy_id - reads the specified addr for its ID. + * @bus: the target MII bus + * @addr: PHY address on the MII bus + * @phy_id: where to store the ID retrieved. + * + * Description: Reads the ID registers of the PHY at @addr on the + * @bus, stores it in @phy_id and returns zero on success. + */ +int get_phy_id(struct mii_dev *bus, int addr, int devad, u32 *phy_id) +{ + int phy_reg; + + /* Grab the bits from PHYIR1, and put them + * in the upper half */ + phy_reg = bus->read(bus, addr, devad, MII_PHYSID1); + + if (phy_reg < 0) + return -EIO; + + *phy_id = (phy_reg & 0xffff) << 16; + + /* Grab the bits from PHYIR2, and put them in the lower half */ + phy_reg = bus->read(bus, addr, devad, MII_PHYSID2); + + if (phy_reg < 0) + return -EIO; + + *phy_id |= (phy_reg & 0xffff); + + return 0; +} + +/** + * get_phy_device - reads the specified PHY device and returns its @phy_device struct + * @bus: the target MII bus + * @addr: PHY address on the MII bus + * + * Description: Reads the ID registers of the PHY at @addr on the + * @bus, then allocates and returns the phy_device to represent it. + */ +struct phy_device *get_phy_device(struct mii_dev *bus, int addr, + phy_interface_t interface) +{ + u32 phy_id = 0x1fffffff; + int i; + int r; + + /* If we have one, return the existing device, with new interface */ + if (bus->phymap[addr]) { + bus->phymap[addr]->interface = interface; + + return bus->phymap[addr]; + } + + /* Try Standard (ie Clause 22) access */ + r = get_phy_id(bus, addr, MDIO_DEVAD_NONE, &phy_id); + if (r) + return NULL; + + /* If the PHY ID is mostly f's, we didn't find anything */ + if ((phy_id & 0x1fffffff) != 0x1fffffff) + return phy_device_create(bus, addr, phy_id, interface); + + /* Otherwise we have to try Clause 45 */ + for (i = 1; i < 5; i++) { + r = get_phy_id(bus, addr, i, &phy_id); + if (r) + return NULL; + + /* If the phy_id is mostly Fs, there is no device there */ + if ((phy_id & 0x1fffffff) != 0x1fffffff) + break; + } + + return phy_device_create(bus, addr, phy_id, interface); +} + +int phy_reset(struct phy_device *phydev) +{ + int reg; + int timeout = 500; + int devad = MDIO_DEVAD_NONE; + +#ifdef CONFIG_PHYLIB_10G + /* If it's 10G, we need to issue reset through one of the MMDs */ + if (is_10g_interface(phydev->interface)) { + if (!phydev->mmds) + gen10g_discover_mmds(phydev); + + devad = ffs(phydev->mmds) - 1; + } +#endif + + reg = phy_read(phydev, devad, MII_BMCR); + if (reg < 0) { + debug("PHY status read failed\n"); + return -1; + } + + reg |= BMCR_RESET; + + if (phy_write(phydev, devad, MII_BMCR, reg) < 0) { + debug("PHY reset failed\n"); + return -1; + } + +#ifdef CONFIG_PHY_RESET_DELAY + udelay(CONFIG_PHY_RESET_DELAY); /* Intel LXT971A needs this */ +#endif + /* + * Poll the control register for the reset bit to go to 0 (it is + * auto-clearing). This should happen within 0.5 seconds per the + * IEEE spec. + */ + while ((reg & BMCR_RESET) && timeout--) { + reg = phy_read(phydev, devad, MII_BMCR); + + if (reg < 0) { + debug("PHY status read failed\n"); + return -1; + } + udelay(1000); + } + + if (reg & BMCR_RESET) { + puts("PHY reset timed out\n"); + return -1; + } + + return 0; +} + +int miiphy_reset(const char *devname, unsigned char addr) +{ + struct mii_dev *bus = miiphy_get_dev_by_name(devname); + struct phy_device *phydev; + + /* + * miiphy_reset was only used on standard PHYs, so we'll fake it here. + * If later code tries to connect with the right interface, this will + * be corrected by get_phy_device in phy_connect() + */ + phydev = get_phy_device(bus, addr, PHY_INTERFACE_MODE_MII); + + return phy_reset(phydev); +} + +struct phy_device *phy_connect(struct mii_dev *bus, int addr, + struct eth_device *dev, + phy_interface_t interface) +{ + struct phy_device *phydev; + + /* Reset the bus */ + bus->reset(bus); + + /* Wait 15ms to make sure the PHY has come out of hard reset */ + udelay(15000); + + phydev = get_phy_device(bus, addr, interface); + + if (!phydev) { + printf("Could not get PHY for %s:%d\n", bus->name, addr); + + return NULL; + } + + /* Soft Reset the PHY */ + phy_reset(phydev); + + if (phydev->dev) + printf("%s:%d is connected to %s. Reconnecting to %s\n", + bus->name, addr, phydev->dev->name, dev->name); + + phydev->dev = dev; + + printf("%s connected to %s\n", dev->name, phydev->drv->name); + + return phydev; +} + +int phy_startup(struct phy_device *phydev) +{ + if (phydev->drv->startup) + phydev->drv->startup(phydev); + + return 0; +} + +static int __board_phy_config(struct phy_device *phydev) +{ + return 0; +} + +int board_phy_config(struct phy_device *phydev) + __attribute__((weak, alias("__board_phy_config"))); + +int phy_config(struct phy_device *phydev) +{ + if (phydev->drv->config) + phydev->drv->config(phydev); + + /* Invoke an optional board-specific helper */ + board_phy_config(phydev); + + return 0; +} + +int phy_shutdown(struct phy_device *phydev) +{ + if (phydev->drv->shutdown) + phydev->drv->shutdown(phydev); + + return 0; +} diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c new file mode 100644 index 0000000..b7e2753 --- /dev/null +++ b/drivers/net/phy/realtek.c @@ -0,0 +1,130 @@ +/* + * RealTek PHY drivers + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * Copyright 2010-2011 Freescale Semiconductor, Inc. + * author Andy Fleming + * + */ +#include <config.h> +#include <common.h> +#include <phy.h> + +#define PHY_AUTONEGOTIATE_TIMEOUT 5000 + +/* RTL8211B PHY Status Register */ +#define MIIM_RTL8211B_PHY_STATUS 0x11 +#define MIIM_RTL8211B_PHYSTAT_SPEED 0xc000 +#define MIIM_RTL8211B_PHYSTAT_GBIT 0x8000 +#define MIIM_RTL8211B_PHYSTAT_100 0x4000 +#define MIIM_RTL8211B_PHYSTAT_DUPLEX 0x2000 +#define MIIM_RTL8211B_PHYSTAT_SPDDONE 0x0800 +#define MIIM_RTL8211B_PHYSTAT_LINK 0x0400 + + +/* RealTek RTL8211B */ +static int rtl8211b_config(struct phy_device *phydev) +{ + phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, BMCR_RESET); + + genphy_config_aneg(phydev); + + return 0; +} + +static int rtl8211b_parse_status(struct phy_device *phydev) +{ + unsigned int speed; + unsigned int mii_reg; + + mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_RTL8211B_PHY_STATUS); + + if (!(mii_reg & MIIM_RTL8211B_PHYSTAT_SPDDONE)) { + int i = 0; + + /* in case of timeout ->link is cleared */ + phydev->link = 1; + puts("Waiting for PHY realtime link"); + while (!(mii_reg & MIIM_RTL8211B_PHYSTAT_SPDDONE)) { + /* Timeout reached ? */ + if (i > PHY_AUTONEGOTIATE_TIMEOUT) { + puts(" TIMEOUT !\n"); + phydev->link = 0; + break; + } + + if ((i++ % 1000) == 0) + putc('.'); + udelay(1000); /* 1 ms */ + mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, + MIIM_RTL8211B_PHY_STATUS); + } + puts(" done\n"); + udelay(500000); /* another 500 ms (results in faster booting) */ + } else { + if (mii_reg & MIIM_RTL8211B_PHYSTAT_LINK) + phydev->link = 1; + else + phydev->link = 0; + } + + if (mii_reg & MIIM_RTL8211B_PHYSTAT_DUPLEX) + phydev->duplex = DUPLEX_FULL; + else + phydev->duplex = DUPLEX_HALF; + + speed = (mii_reg & MIIM_RTL8211B_PHYSTAT_SPEED); + + switch (speed) { + case MIIM_RTL8211B_PHYSTAT_GBIT: + phydev->speed = SPEED_1000; + break; + case MIIM_RTL8211B_PHYSTAT_100: + phydev->speed = SPEED_100; + break; + default: + phydev->speed = SPEED_10; + } + + return 0; +} + +static int rtl8211b_startup(struct phy_device *phydev) +{ + /* Read the Status (2x to make sure link is right) */ + genphy_update_link(phydev); + rtl8211b_parse_status(phydev); + + return 0; +} + +static struct phy_driver RTL8211B_driver = { + .name = "RealTek RTL8211B", + .uid = 0x1cc910, + .mask = 0xfffff0, + .features = PHY_GBIT_FEATURES, + .config = &rtl8211b_config, + .startup = &rtl8211b_startup, + .shutdown = &genphy_shutdown, +}; + +int phy_realtek_init(void) +{ + phy_register(&RTL8211B_driver); + + return 0; +} diff --git a/drivers/net/phy/teranetics.c b/drivers/net/phy/teranetics.c new file mode 100644 index 0000000..a771791 --- /dev/null +++ b/drivers/net/phy/teranetics.c @@ -0,0 +1,62 @@ +/* + * Teranetics PHY drivers + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * Copyright 2010-2011 Freescale Semiconductor, Inc. + * author Andy Fleming + * + */ +#include <config.h> +#include <phy.h> + +#ifndef CONFIG_PHYLIB_10G +#error The Teranetics PHY needs 10G support +#endif + +int tn2020_config(struct phy_device *phydev) +{ + if (phydev->port == PORT_FIBRE) { + unsigned short restart_an = (MDIO_AN_CTRL1_RESTART | + MDIO_AN_CTRL1_ENABLE | + MDIO_AN_CTRL1_XNP); + + phy_write(phydev, 30, 93, 2); + phy_write(phydev, MDIO_MMD_AN, MDIO_CTRL1, restart_an); + } + + return 0; +} + +struct phy_driver tn2020_driver = { + .name = "Teranetics TN2020", + .uid = 0x00a19410, + .mask = 0xfffffff0, + .features = PHY_10G_FEATURES, + .mmds = (MDIO_DEVS_PMAPMD | MDIO_DEVS_PCS | + MDIO_DEVS_PHYXS | MDIO_DEVS_AN | + MDIO_DEVS_VEND1 | MDIO_DEVS_VEND2), + .config = &tn2020_config, + .startup = &gen10g_startup, + .shutdown = &gen10g_shutdown, +}; + +int phy_teranetics_init(void) +{ + phy_register(&tn2020_driver); + + return 0; +} diff --git a/drivers/net/phy/vitesse.c b/drivers/net/phy/vitesse.c new file mode 100644 index 0000000..d48d4fe --- /dev/null +++ b/drivers/net/phy/vitesse.c @@ -0,0 +1,242 @@ +/* + * Vitesse PHY drivers + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * Copyright 2010-2011 Freescale Semiconductor, Inc. + * author Andy Fleming + * + */ +#include <miiphy.h> + +/* Cicada Auxiliary Control/Status Register */ +#define MIIM_CIS82xx_AUX_CONSTAT 0x1c +#define MIIM_CIS82xx_AUXCONSTAT_INIT 0x0004 +#define MIIM_CIS82xx_AUXCONSTAT_DUPLEX 0x0020 +#define MIIM_CIS82xx_AUXCONSTAT_SPEED 0x0018 +#define MIIM_CIS82xx_AUXCONSTAT_GBIT 0x0010 +#define MIIM_CIS82xx_AUXCONSTAT_100 0x0008 + +/* Cicada Extended Control Register 1 */ +#define MIIM_CIS82xx_EXT_CON1 0x17 +#define MIIM_CIS8201_EXTCON1_INIT 0x0000 + +/* Cicada 8204 Extended PHY Control Register 1 */ +#define MIIM_CIS8204_EPHY_CON 0x17 +#define MIIM_CIS8204_EPHYCON_INIT 0x0006 +#define MIIM_CIS8204_EPHYCON_RGMII 0x1100 + +/* Cicada 8204 Serial LED Control Register */ +#define MIIM_CIS8204_SLED_CON 0x1b +#define MIIM_CIS8204_SLEDCON_INIT 0x1115 + +/* Vitesse VSC8601 Extended PHY Control Register 1 */ +#define MIIM_VSC8601_EPHY_CON 0x17 +#define MIIM_VSC8601_EPHY_CON_INIT_SKEW 0x1120 +#define MIIM_VSC8601_SKEW_CTRL 0x1c + +#define PHY_EXT_PAGE_ACCESS 0x1f + +/* CIS8201 */ +static int vitesse_config(struct phy_device *phydev) +{ + /* Override PHY config settings */ + phy_write(phydev, MDIO_DEVAD_NONE, MIIM_CIS82xx_AUX_CONSTAT, + MIIM_CIS82xx_AUXCONSTAT_INIT); + /* Set up the interface mode */ + phy_write(phydev, MDIO_DEVAD_NONE, MIIM_CIS82xx_EXT_CON1, + MIIM_CIS8201_EXTCON1_INIT); + + genphy_config_aneg(phydev); + + return 0; +} + +static int vitesse_parse_status(struct phy_device *phydev) +{ + int speed; + int mii_reg; + + mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_CIS82xx_AUX_CONSTAT); + + if (mii_reg & MIIM_CIS82xx_AUXCONSTAT_DUPLEX) + phydev->duplex = DUPLEX_FULL; + else + phydev->duplex = DUPLEX_HALF; + + speed = mii_reg & MIIM_CIS82xx_AUXCONSTAT_SPEED; + switch (speed) { + case MIIM_CIS82xx_AUXCONSTAT_GBIT: + phydev->speed = SPEED_1000; + break; + case MIIM_CIS82xx_AUXCONSTAT_100: + phydev->speed = SPEED_100; + break; + default: + phydev->speed = SPEED_10; + break; + } + + return 0; +} + +static int vitesse_startup(struct phy_device *phydev) +{ + genphy_update_link(phydev); + vitesse_parse_status(phydev); + + return 0; +} + +static int cis8204_config(struct phy_device *phydev) +{ + /* Override PHY config settings */ + phy_write(phydev, MDIO_DEVAD_NONE, MIIM_CIS82xx_AUX_CONSTAT, + MIIM_CIS82xx_AUXCONSTAT_INIT); + + genphy_config_aneg(phydev); + + if ((phydev->interface == PHY_INTERFACE_MODE_RGMII) || + (phydev->interface == PHY_INTERFACE_MODE_RGMII) || + (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) || + (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID)) + phy_write(phydev, MDIO_DEVAD_NONE, MIIM_CIS8204_EPHY_CON, + MIIM_CIS8204_EPHYCON_INIT | + MIIM_CIS8204_EPHYCON_RGMII); + else + phy_write(phydev, MDIO_DEVAD_NONE, MIIM_CIS8204_EPHY_CON, + MIIM_CIS8204_EPHYCON_INIT); + + return 0; +} + +/* Vitesse VSC8601 */ +int vsc8601_config(struct phy_device *phydev) +{ + /* Configure some basic stuff */ +#ifdef CONFIG_SYS_VSC8601_SKEWFIX + phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8601_EPHY_CON, + MIIM_VSC8601_EPHY_CON_INIT_SKEW); +#if defined(CONFIG_SYS_VSC8601_SKEW_TX) && defined(CONFIG_SYS_VSC8601_SKEW_RX) + phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS, 1); +#define VSC8101_SKEW \ + ((CONFIG_SYS_VSC8601_SKEW_TX << 14) \ + | (CONFIG_SYS_VSC8601_SKEW_RX << 12)) + phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8601_SKEW_CTRL, + VSC8101_SKEW); + phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS, 0); +#endif +#endif + + genphy_config_aneg(phydev); + + return 0; +} + +static struct phy_driver VSC8211_driver = { + .name = "Vitesse VSC8211", + .uid = 0xfc4b0, + .mask = 0xffff0, + .features = PHY_GBIT_FEATURES, + .config = &vitesse_config, + .startup = &vitesse_startup, + .shutdown = &genphy_shutdown, +}; + +static struct phy_driver VSC8221_driver = { + .name = "Vitesse VSC8221", + .uid = 0xfc550, + .mask = 0xffff0, + .features = PHY_GBIT_FEATURES, + .config = &genphy_config_aneg, + .startup = &vitesse_startup, + .shutdown = &genphy_shutdown, +}; + +static struct phy_driver VSC8244_driver = { + .name = "Vitesse VSC8244", + .uid = 0xfc6c0, + .mask = 0xffff0, + .features = PHY_GBIT_FEATURES, + .config = &genphy_config_aneg, + .startup = &vitesse_startup, + .shutdown = &genphy_shutdown, +}; + +static struct phy_driver VSC8234_driver = { + .name = "Vitesse VSC8234", + .uid = 0xfc620, + .mask = 0xffff0, + .features = PHY_GBIT_FEATURES, + .config = &genphy_config_aneg, + .startup = &vitesse_startup, + .shutdown = &genphy_shutdown, +}; + +static struct phy_driver VSC8601_driver = { + .name = "Vitesse VSC8601", + .uid = 0x70420, + .mask = 0xffff0, + .features = PHY_GBIT_FEATURES, + .config = &vsc8601_config, + .startup = &vitesse_startup, + .shutdown = &genphy_shutdown, +}; + +static struct phy_driver VSC8641_driver = { + .name = "Vitesse VSC8641", + .uid = 0x70430, + .mask = 0xffff0, + .features = PHY_GBIT_FEATURES, + .config = &genphy_config_aneg, + .startup = &vitesse_startup, + .shutdown = &genphy_shutdown, +}; + +/* Vitesse bought Cicada, so we'll put these here */ +static struct phy_driver cis8201_driver = { + .name = "CIS8201", + .uid = 0xfc410, + .mask = 0xffff0, + .features = PHY_GBIT_FEATURES, + .config = &vitesse_config, + .startup = &vitesse_startup, + .shutdown = &genphy_shutdown, +}; + +static struct phy_driver cis8204_driver = { + .name = "Cicada Cis8204", + .uid = 0xfc440, + .mask = 0xffff0, + .features = PHY_GBIT_FEATURES, + .config = &cis8204_config, + .startup = &vitesse_startup, + .shutdown = &genphy_shutdown, +}; + +int phy_vitesse_init(void) +{ + phy_register(&VSC8641_driver); + phy_register(&VSC8601_driver); + phy_register(&VSC8234_driver); + phy_register(&VSC8244_driver); + phy_register(&VSC8211_driver); + phy_register(&VSC8221_driver); + phy_register(&cis8201_driver); + phy_register(&cis8204_driver); + + return 0; +} diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c index 9c8fe62..06e5834 100644 --- a/drivers/net/tsec.c +++ b/drivers/net/tsec.c @@ -5,7 +5,7 @@ * terms of the GNU Public License, Version 2, incorporated * herein by reference. * - * Copyright 2004-2010 Freescale Semiconductor, Inc. + * Copyright 2004-2011 Freescale Semiconductor, Inc. * (C) Copyright 2003, Motorola, Inc. * author Andy Fleming * @@ -17,10 +17,9 @@ #include <net.h> #include <command.h> #include <tsec.h> +#include <fsl_mdio.h> #include <asm/errno.h> -#include "miiphy.h" - DECLARE_GLOBAL_DATA_PTR; #define TX_BUF_CNT 2 @@ -44,31 +43,6 @@ static RTXBD rtx __attribute__ ((aligned(8))); #error "rtx must be 64-bit aligned" #endif -static int tsec_send(struct eth_device *dev, - volatile void *packet, int length); -static int tsec_recv(struct eth_device *dev); -static int tsec_init(struct eth_device *dev, bd_t * bd); -static int tsec_initialize(bd_t * bis, struct tsec_info_struct *tsec_info); -static void tsec_halt(struct eth_device *dev); -static void init_registers(volatile tsec_t * regs); -static void startup_tsec(struct eth_device *dev); -static int init_phy(struct eth_device *dev); -void write_phy_reg(struct tsec_private *priv, uint regnum, uint value); -uint read_phy_reg(struct tsec_private *priv, uint regnum); -static struct phy_info *get_phy_info(struct eth_device *dev); -static void phy_run_commands(struct tsec_private *priv, struct phy_cmd *cmd); -static void adjust_link(struct eth_device *dev); -#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) \ - && !defined(BITBANGMII) -static int tsec_miiphy_write(const char *devname, unsigned char addr, - unsigned char reg, unsigned short value); -static int tsec_miiphy_read(const char *devname, unsigned char addr, - unsigned char reg, unsigned short *value); -#endif -#ifdef CONFIG_MCAST_TFTP -static int tsec_mcast_addr (struct eth_device *dev, u8 mcast_mac, u8 set); -#endif - /* Default initializations for TSEC controllers. */ static struct tsec_info_struct tsec_info[] = { @@ -81,10 +55,10 @@ static struct tsec_info_struct tsec_info[] = { #ifdef CONFIG_MPC85XX_FEC { .regs = (tsec_t *)(TSEC_BASE_ADDR + 0x2000), - .miiregs = (tsec_mdio_t *)(MDIO_BASE_ADDR), .devname = CONFIG_MPC85XX_FEC_NAME, .phyaddr = FEC_PHY_ADDR, - .flags = FEC_FLAGS + .flags = FEC_FLAGS, + .mii_devname = DEFAULT_MII_NAME }, /* FEC */ #endif #ifdef CONFIG_TSEC3 @@ -95,195 +69,6 @@ static struct tsec_info_struct tsec_info[] = { #endif }; -/* - * Initialize all the TSEC devices - * - * Returns the number of TSEC devices that were initialized - */ -int tsec_eth_init(bd_t *bis, struct tsec_info_struct *tsecs, int num) -{ - int i; - int ret, count = 0; - - for (i = 0; i < num; i++) { - ret = tsec_initialize(bis, &tsecs[i]); - if (ret > 0) - count += ret; - } - - return count; -} - -int tsec_standard_init(bd_t *bis) -{ - return tsec_eth_init(bis, tsec_info, ARRAY_SIZE(tsec_info)); -} - -/* Initialize device structure. Returns success if PHY - * initialization succeeded (i.e. if it recognizes the PHY) - */ -static int tsec_initialize(bd_t * bis, struct tsec_info_struct *tsec_info) -{ - struct eth_device *dev; - int i; - struct tsec_private *priv; - - dev = (struct eth_device *)malloc(sizeof *dev); - - if (NULL == dev) - return 0; - - memset(dev, 0, sizeof *dev); - - priv = (struct tsec_private *)malloc(sizeof(*priv)); - - if (NULL == priv) - return 0; - - privlist[num_tsecs++] = priv; - priv->regs = tsec_info->regs; - priv->phyregs = tsec_info->miiregs; - priv->phyregs_sgmii = tsec_info->miiregs_sgmii; - - priv->phyaddr = tsec_info->phyaddr; - priv->flags = tsec_info->flags; - - sprintf(dev->name, tsec_info->devname); - dev->iobase = 0; - dev->priv = priv; - dev->init = tsec_init; - dev->halt = tsec_halt; - dev->send = tsec_send; - dev->recv = tsec_recv; -#ifdef CONFIG_MCAST_TFTP - dev->mcast = tsec_mcast_addr; -#endif - - /* Tell u-boot to get the addr from the env */ - for (i = 0; i < 6; i++) - dev->enetaddr[i] = 0; - - eth_register(dev); - - /* Reset the MAC */ - priv->regs->maccfg1 |= MACCFG1_SOFT_RESET; - udelay(2); /* Soft Reset must be asserted for 3 TX clocks */ - priv->regs->maccfg1 &= ~(MACCFG1_SOFT_RESET); - -#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) \ - && !defined(BITBANGMII) - miiphy_register(dev->name, tsec_miiphy_read, tsec_miiphy_write); -#endif - - /* Try to initialize PHY here, and return */ - return init_phy(dev); -} - -/* Initializes data structures and registers for the controller, - * and brings the interface up. Returns the link status, meaning - * that it returns success if the link is up, failure otherwise. - * This allows u-boot to find the first active controller. - */ -static int tsec_init(struct eth_device *dev, bd_t * bd) -{ - uint tempval; - char tmpbuf[MAC_ADDR_LEN]; - int i; - struct tsec_private *priv = (struct tsec_private *)dev->priv; - volatile tsec_t *regs = priv->regs; - - /* Make sure the controller is stopped */ - tsec_halt(dev); - - /* Init MACCFG2. Defaults to GMII */ - regs->maccfg2 = MACCFG2_INIT_SETTINGS; - - /* Init ECNTRL */ - regs->ecntrl = ECNTRL_INIT_SETTINGS; - - /* Copy the station address into the address registers. - * Backwards, because little endian MACS are dumb */ - for (i = 0; i < MAC_ADDR_LEN; i++) { - tmpbuf[MAC_ADDR_LEN - 1 - i] = dev->enetaddr[i]; - } - tempval = (tmpbuf[0] << 24) | (tmpbuf[1] << 16) | (tmpbuf[2] << 8) | - tmpbuf[3]; - - regs->macstnaddr1 = tempval; - - tempval = *((uint *) (tmpbuf + 4)); - - regs->macstnaddr2 = tempval; - - /* reset the indices to zero */ - rxIdx = 0; - txIdx = 0; - - /* Clear out (for the most part) the other registers */ - init_registers(regs); - - /* Ready the device for tx/rx */ - startup_tsec(dev); - - /* If there's no link, fail */ - return (priv->link ? 0 : -1); -} - -/* Writes the given phy's reg with value, using the specified MDIO regs */ -static void tsec_local_mdio_write(volatile tsec_mdio_t *phyregs, uint addr, - uint reg, uint value) -{ - int timeout = 1000000; - - phyregs->miimadd = (addr << 8) | reg; - phyregs->miimcon = value; - asm("sync"); - - timeout = 1000000; - while ((phyregs->miimind & MIIMIND_BUSY) && timeout--) ; -} - - -/* Provide the default behavior of writing the PHY of this ethernet device */ -#define write_phy_reg(priv, regnum, value) \ - tsec_local_mdio_write(priv->phyregs,priv->phyaddr,regnum,value) - -/* Reads register regnum on the device's PHY through the - * specified registers. It lowers and raises the read - * command, and waits for the data to become valid (miimind - * notvalid bit cleared), and the bus to cease activity (miimind - * busy bit cleared), and then returns the value - */ -static uint tsec_local_mdio_read(volatile tsec_mdio_t *phyregs, - uint phyid, uint regnum) -{ - uint value; - - /* Put the address of the phy, and the register - * number into MIIMADD */ - phyregs->miimadd = (phyid << 8) | regnum; - - /* Clear the command register, and wait */ - phyregs->miimcom = 0; - asm("sync"); - - /* Initiate a read command, and wait */ - phyregs->miimcom = MIIM_READ_COMMAND; - asm("sync"); - - /* Wait for the the indication that the read is done */ - while ((phyregs->miimind & (MIIMIND_NOTVALID | MIIMIND_BUSY))) ; - - /* Grab the value read from the PHY */ - value = phyregs->miimstat; - - return value; -} - -/* #define to provide old read_phy_reg functionality without duplicating code */ -#define read_phy_reg(priv,regnum) \ - tsec_local_mdio_read(priv->phyregs,priv->phyaddr,regnum) - #define TBIANA_SETTINGS ( \ TBIANA_ASYMMETRIC_PAUSE \ | TBIANA_SYMMETRIC_PAUSE \ @@ -305,661 +90,150 @@ static void tsec_configure_serdes(struct tsec_private *priv) { /* Access TBI PHY registers at given TSEC register offset as opposed * to the register offset used for external PHY accesses */ - tsec_local_mdio_write(priv->phyregs_sgmii, priv->regs->tbipa, TBI_ANA, - TBIANA_SETTINGS); - tsec_local_mdio_write(priv->phyregs_sgmii, priv->regs->tbipa, TBI_TBICON, - TBICON_CLK_SELECT); - tsec_local_mdio_write(priv->phyregs_sgmii, priv->regs->tbipa, TBI_CR, - CONFIG_TSEC_TBICR_SETTINGS); + tsec_local_mdio_write(priv->phyregs_sgmii, in_be32(&priv->regs->tbipa), + 0, TBI_ANA, TBIANA_SETTINGS); + tsec_local_mdio_write(priv->phyregs_sgmii, in_be32(&priv->regs->tbipa), + 0, TBI_TBICON, TBICON_CLK_SELECT); + tsec_local_mdio_write(priv->phyregs_sgmii, in_be32(&priv->regs->tbipa), + 0, TBI_CR, CONFIG_TSEC_TBICR_SETTINGS); } -/* Discover which PHY is attached to the device, and configure it - * properly. If the PHY is not recognized, then return 0 - * (failure). Otherwise, return 1 - */ -static int init_phy(struct eth_device *dev) -{ - struct tsec_private *priv = (struct tsec_private *)dev->priv; - struct phy_info *curphy; - volatile tsec_t *regs = priv->regs; - - /* Assign a Physical address to the TBI */ - regs->tbipa = CONFIG_SYS_TBIPA_VALUE; - asm("sync"); - - /* Reset MII (due to new addresses) */ - priv->phyregs->miimcfg = MIIMCFG_RESET; - asm("sync"); - priv->phyregs->miimcfg = MIIMCFG_INIT_VALUE; - asm("sync"); - while (priv->phyregs->miimind & MIIMIND_BUSY) ; - - /* Get the cmd structure corresponding to the attached - * PHY */ - curphy = get_phy_info(dev); - - if (curphy == NULL) { - priv->phyinfo = NULL; - printf("%s: No PHY found\n", dev->name); - - return 0; - } - - if (regs->ecntrl & ECNTRL_SGMII_MODE) - tsec_configure_serdes(priv); - - priv->phyinfo = curphy; - - phy_run_commands(priv, priv->phyinfo->config); - - return 1; -} - -/* - * Returns which value to write to the control register. - * For 10/100, the value is slightly different - */ -static uint mii_cr_init(uint mii_reg, struct tsec_private * priv) -{ - if (priv->flags & TSEC_GIGABIT) - return MIIM_CONTROL_INIT; - else - return MIIM_CR_INIT; -} - -/* - * Wait for auto-negotiation to complete, then determine link - */ -static uint mii_parse_sr(uint mii_reg, struct tsec_private * priv) -{ - /* - * Wait if the link is up, and autonegotiation is in progress - * (ie - we're capable and it's not done) - */ - mii_reg = read_phy_reg(priv, MIIM_STATUS); - if ((mii_reg & BMSR_ANEGCAPABLE) && !(mii_reg & BMSR_ANEGCOMPLETE)) { - int i = 0; - - puts("Waiting for PHY auto negotiation to complete"); - while (!(mii_reg & BMSR_ANEGCOMPLETE)) { - /* - * Timeout reached ? - */ - if (i > PHY_AUTONEGOTIATE_TIMEOUT) { - puts(" TIMEOUT !\n"); - priv->link = 0; - return 0; - } - - if (ctrlc()) { - puts("user interrupt!\n"); - priv->link = 0; - return -EINTR; - } - - if ((i++ % 1000) == 0) { - putc('.'); - } - udelay(1000); /* 1 ms */ - mii_reg = read_phy_reg(priv, MIIM_STATUS); - } - puts(" done\n"); - - /* Link status bit is latched low, read it again */ - mii_reg = read_phy_reg(priv, MIIM_STATUS); - - udelay(500000); /* another 500 ms (results in faster booting) */ - } +#ifdef CONFIG_MCAST_TFTP - priv->link = mii_reg & MIIM_STATUS_LINK ? 1 : 0; +/* CREDITS: linux gianfar driver, slightly adjusted... thanx. */ - return 0; -} +/* Set the appropriate hash bit for the given addr */ -/* Generic function which updates the speed and duplex. If - * autonegotiation is enabled, it uses the AND of the link - * partner's advertised capabilities and our advertised - * capabilities. If autonegotiation is disabled, we use the - * appropriate bits in the control register. - * - * Stolen from Linux's mii.c and phy_device.c - */ -static uint mii_parse_link(uint mii_reg, struct tsec_private *priv) +/* The algorithm works like so: + * 1) Take the Destination Address (ie the multicast address), and + * do a CRC on it (little endian), and reverse the bits of the + * result. + * 2) Use the 8 most significant bits as a hash into a 256-entry + * table. The table is controlled through 8 32-bit registers: + * gaddr0-7. gaddr0's MSB is entry 0, and gaddr7's LSB is + * gaddr7. This means that the 3 most significant bits in the + * hash index which gaddr register to use, and the 5 other bits + * indicate which bit (assuming an IBM numbering scheme, which + * for PowerPC (tm) is usually the case) in the tregister holds + * the entry. */ +static int +tsec_mcast_addr (struct eth_device *dev, u8 mcast_mac, u8 set) { - /* We're using autonegotiation */ - if (mii_reg & BMSR_ANEGCAPABLE) { - uint lpa = 0; - uint gblpa = 0; - - /* Check for gigabit capability */ - if (mii_reg & BMSR_ERCAP) { - /* We want a list of states supported by - * both PHYs in the link - */ - gblpa = read_phy_reg(priv, MII_STAT1000); - gblpa &= read_phy_reg(priv, MII_CTRL1000) << 2; - } - - /* Set the baseline so we only have to set them - * if they're different - */ - priv->speed = 10; - priv->duplexity = 0; - - /* Check the gigabit fields */ - if (gblpa & (PHY_1000BTSR_1000FD | PHY_1000BTSR_1000HD)) { - priv->speed = 1000; - - if (gblpa & PHY_1000BTSR_1000FD) - priv->duplexity = 1; - - /* We're done! */ - return 0; - } - - lpa = read_phy_reg(priv, MII_ADVERTISE); - lpa &= read_phy_reg(priv, MII_LPA); + struct tsec_private *priv = privlist[1]; + volatile tsec_t *regs = priv->regs; + volatile u32 *reg_array, value; + u8 result, whichbit, whichreg; - if (lpa & (LPA_100FULL | LPA_100HALF)) { - priv->speed = 100; + result = (u8)((ether_crc(MAC_ADDR_LEN,mcast_mac) >> 24) & 0xff); + whichbit = result & 0x1f; /* the 5 LSB = which bit to set */ + whichreg = result >> 5; /* the 3 MSB = which reg to set it in */ + value = (1 << (31-whichbit)); - if (lpa & LPA_100FULL) - priv->duplexity = 1; + reg_array = &(regs->hash.gaddr0); - } else if (lpa & LPA_10FULL) - priv->duplexity = 1; + if (set) { + reg_array[whichreg] |= value; } else { - uint bmcr = read_phy_reg(priv, MII_BMCR); - - priv->speed = 10; - priv->duplexity = 0; - - if (bmcr & BMCR_FULLDPLX) - priv->duplexity = 1; - - if (bmcr & BMCR_SPEED1000) - priv->speed = 1000; - else if (bmcr & BMCR_SPEED100) - priv->speed = 100; - } - - return 0; -} - -/* - * "Ethernet@Wirespeed" needs to be enabled to achieve link in certain - * circumstances. eg a gigabit TSEC connected to a gigabit switch with - * a 4-wire ethernet cable. Both ends advertise gigabit, but can't - * link. "Ethernet@Wirespeed" reduces advertised speed until link - * can be achieved. - */ -static uint mii_BCM54xx_wirespeed(uint mii_reg, struct tsec_private *priv) -{ - return (read_phy_reg(priv, mii_reg) & 0x8FFF) | 0x8010; -} - -/* - * Parse the BCM54xx status register for speed and duplex information. - * The linux sungem_phy has this information, but in a table format. - */ -static uint mii_parse_BCM54xx_sr(uint mii_reg, struct tsec_private *priv) -{ - /* If there is no link, speed and duplex don't matter */ - if (!priv->link) - return 0; - - switch ((mii_reg & MIIM_BCM54xx_AUXSTATUS_LINKMODE_MASK) >> - MIIM_BCM54xx_AUXSTATUS_LINKMODE_SHIFT) { - case 1: - priv->duplexity = 0; - priv->speed = 10; - break; - case 2: - priv->duplexity = 1; - priv->speed = 10; - break; - case 3: - priv->duplexity = 0; - priv->speed = 100; - break; - case 5: - priv->duplexity = 1; - priv->speed = 100; - break; - case 6: - priv->duplexity = 0; - priv->speed = 1000; - break; - case 7: - priv->duplexity = 1; - priv->speed = 1000; - break; - default: - printf("Auto-neg error, defaulting to 10BT/HD\n"); - priv->duplexity = 0; - priv->speed = 10; - break; + reg_array[whichreg] &= ~value; } - return 0; } +#endif /* Multicast TFTP ? */ -/* - * Find out if PHY is in copper or serdes mode by looking at Expansion Reg - * 0x42 - "Operating Mode Status Register" - */ -static int BCM8482_is_serdes(struct tsec_private *priv) -{ - u16 val; - int serdes = 0; - - write_phy_reg(priv, MIIM_BCM54XX_EXP_SEL, MIIM_BCM54XX_EXP_SEL_ER | 0x42); - val = read_phy_reg(priv, MIIM_BCM54XX_EXP_DATA); - - switch (val & 0x1f) { - case 0x0d: /* RGMII-to-100Base-FX */ - case 0x0e: /* RGMII-to-SGMII */ - case 0x0f: /* RGMII-to-SerDes */ - case 0x12: /* SGMII-to-SerDes */ - case 0x13: /* SGMII-to-100Base-FX */ - case 0x16: /* SerDes-to-Serdes */ - serdes = 1; - break; - case 0x6: /* RGMII-to-Copper */ - case 0x14: /* SGMII-to-Copper */ - case 0x17: /* SerDes-to-Copper */ - break; - default: - printf("ERROR, invalid PHY mode (0x%x\n)", val); - break; - } - - return serdes; -} - -/* - * Determine SerDes link speed and duplex from Expansion reg 0x42 "Operating - * Mode Status Register" +/* Initialized required registers to appropriate values, zeroing + * those we don't care about (unless zero is bad, in which case, + * choose a more appropriate value) */ -uint mii_parse_BCM5482_serdes_sr(struct tsec_private *priv) +static void init_registers(tsec_t *regs) { - u16 val; - int i = 0; + /* Clear IEVENT */ + out_be32(®s->ievent, IEVENT_INIT_CLEAR); + + out_be32(®s->imask, IMASK_INIT_CLEAR); + + out_be32(®s->hash.iaddr0, 0); + out_be32(®s->hash.iaddr1, 0); + out_be32(®s->hash.iaddr2, 0); + out_be32(®s->hash.iaddr3, 0); + out_be32(®s->hash.iaddr4, 0); + out_be32(®s->hash.iaddr5, 0); + out_be32(®s->hash.iaddr6, 0); + out_be32(®s->hash.iaddr7, 0); + + out_be32(®s->hash.gaddr0, 0); + out_be32(®s->hash.gaddr1, 0); + out_be32(®s->hash.gaddr2, 0); + out_be32(®s->hash.gaddr3, 0); + out_be32(®s->hash.gaddr4, 0); + out_be32(®s->hash.gaddr5, 0); + out_be32(®s->hash.gaddr6, 0); + out_be32(®s->hash.gaddr7, 0); + + out_be32(®s->rctrl, 0x00000000); - /* Wait 1s for link - Clause 37 autonegotiation happens very fast */ - while (1) { - write_phy_reg(priv, MIIM_BCM54XX_EXP_SEL, - MIIM_BCM54XX_EXP_SEL_ER | 0x42); - val = read_phy_reg(priv, MIIM_BCM54XX_EXP_DATA); + /* Init RMON mib registers */ + memset((void *)&(regs->rmon), 0, sizeof(rmon_mib_t)); - if (val & 0x8000) - break; + out_be32(®s->rmon.cam1, 0xffffffff); + out_be32(®s->rmon.cam2, 0xffffffff); - if (i++ > 1000) { - priv->link = 0; - return 1; - } + out_be32(®s->mrblr, MRBLR_INIT_SETTINGS); - udelay(1000); /* 1 ms */ - } + out_be32(®s->minflr, MINFLR_INIT_SETTINGS); - priv->link = 1; - switch ((val >> 13) & 0x3) { - case (0x00): - priv->speed = 10; - break; - case (0x01): - priv->speed = 100; - break; - case (0x02): - priv->speed = 1000; - break; - } + out_be32(®s->attr, ATTR_INIT_SETTINGS); + out_be32(®s->attreli, ATTRELI_INIT_SETTINGS); - priv->duplexity = (val & 0x1000) == 0x1000; - - return 0; } -/* - * Figure out if BCM5482 is in serdes or copper mode and determine link - * configuration accordingly - */ -static uint mii_parse_BCM5482_sr(uint mii_reg, struct tsec_private *priv) -{ - if (BCM8482_is_serdes(priv)) { - mii_parse_BCM5482_serdes_sr(priv); - priv->flags |= TSEC_FIBER; - } else { - /* Wait for auto-negotiation to complete or fail */ - mii_parse_sr(mii_reg, priv); - - /* Parse BCM54xx copper aux status register */ - mii_reg = read_phy_reg(priv, MIIM_BCM54xx_AUXSTATUS); - mii_parse_BCM54xx_sr(mii_reg, priv); - } - - return 0; -} - -/* Parse the 88E1011's status register for speed and duplex - * information - */ -static uint mii_parse_88E1011_psr(uint mii_reg, struct tsec_private * priv) -{ - uint speed; - - mii_reg = read_phy_reg(priv, MIIM_88E1011_PHY_STATUS); - - if ((mii_reg & MIIM_88E1011_PHYSTAT_LINK) && - !(mii_reg & MIIM_88E1011_PHYSTAT_SPDDONE)) { - int i = 0; - - puts("Waiting for PHY realtime link"); - while (!(mii_reg & MIIM_88E1011_PHYSTAT_SPDDONE)) { - /* Timeout reached ? */ - if (i > PHY_AUTONEGOTIATE_TIMEOUT) { - puts(" TIMEOUT !\n"); - priv->link = 0; - break; - } - - if ((i++ % 1000) == 0) { - putc('.'); - } - udelay(1000); /* 1 ms */ - mii_reg = read_phy_reg(priv, MIIM_88E1011_PHY_STATUS); - } - puts(" done\n"); - udelay(500000); /* another 500 ms (results in faster booting) */ - } else { - if (mii_reg & MIIM_88E1011_PHYSTAT_LINK) - priv->link = 1; - else - priv->link = 0; - } - - if (mii_reg & MIIM_88E1011_PHYSTAT_DUPLEX) - priv->duplexity = 1; - else - priv->duplexity = 0; - - speed = (mii_reg & MIIM_88E1011_PHYSTAT_SPEED); - - switch (speed) { - case MIIM_88E1011_PHYSTAT_GBIT: - priv->speed = 1000; - break; - case MIIM_88E1011_PHYSTAT_100: - priv->speed = 100; - break; - default: - priv->speed = 10; - } - - return 0; -} - -/* Parse the RTL8211B's status register for speed and duplex - * information +/* Configure maccfg2 based on negotiated speed and duplex + * reported by PHY handling code */ -static uint mii_parse_RTL8211B_sr(uint mii_reg, struct tsec_private * priv) +static void adjust_link(struct tsec_private *priv, struct phy_device *phydev) { - uint speed; - - mii_reg = read_phy_reg(priv, MIIM_RTL8211B_PHY_STATUS); - if (!(mii_reg & MIIM_RTL8211B_PHYSTAT_SPDDONE)) { - int i = 0; - - /* in case of timeout ->link is cleared */ - priv->link = 1; - puts("Waiting for PHY realtime link"); - while (!(mii_reg & MIIM_RTL8211B_PHYSTAT_SPDDONE)) { - /* Timeout reached ? */ - if (i > PHY_AUTONEGOTIATE_TIMEOUT) { - puts(" TIMEOUT !\n"); - priv->link = 0; - break; - } - - if ((i++ % 1000) == 0) { - putc('.'); - } - udelay(1000); /* 1 ms */ - mii_reg = read_phy_reg(priv, MIIM_RTL8211B_PHY_STATUS); - } - puts(" done\n"); - udelay(500000); /* another 500 ms (results in faster booting) */ - } else { - if (mii_reg & MIIM_RTL8211B_PHYSTAT_LINK) - priv->link = 1; - else - priv->link = 0; - } - - if (mii_reg & MIIM_RTL8211B_PHYSTAT_DUPLEX) - priv->duplexity = 1; - else - priv->duplexity = 0; - - speed = (mii_reg & MIIM_RTL8211B_PHYSTAT_SPEED); + tsec_t *regs = priv->regs; + u32 ecntrl, maccfg2; - switch (speed) { - case MIIM_RTL8211B_PHYSTAT_GBIT: - priv->speed = 1000; - break; - case MIIM_RTL8211B_PHYSTAT_100: - priv->speed = 100; - break; - default: - priv->speed = 10; + if (!phydev->link) { + printf("%s: No link.\n", phydev->dev->name); + return; } - return 0; -} + /* clear all bits relative with interface mode */ + ecntrl = in_be32(®s->ecntrl); + ecntrl &= ~ECNTRL_R100; -/* Parse the cis8201's status register for speed and duplex - * information - */ -static uint mii_parse_cis8201(uint mii_reg, struct tsec_private * priv) -{ - uint speed; + maccfg2 = in_be32(®s->maccfg2); + maccfg2 &= ~(MACCFG2_IF | MACCFG2_FULL_DUPLEX); - if (mii_reg & MIIM_CIS8201_AUXCONSTAT_DUPLEX) - priv->duplexity = 1; - else - priv->duplexity = 0; + if (phydev->duplex) + maccfg2 |= MACCFG2_FULL_DUPLEX; - speed = mii_reg & MIIM_CIS8201_AUXCONSTAT_SPEED; - switch (speed) { - case MIIM_CIS8201_AUXCONSTAT_GBIT: - priv->speed = 1000; - break; - case MIIM_CIS8201_AUXCONSTAT_100: - priv->speed = 100; + switch (phydev->speed) { + case 1000: + maccfg2 |= MACCFG2_GMII; break; - default: - priv->speed = 10; - break; - } + case 100: + case 10: + maccfg2 |= MACCFG2_MII; - return 0; -} - -/* Parse the vsc8244's status register for speed and duplex - * information - */ -static uint mii_parse_vsc8244(uint mii_reg, struct tsec_private * priv) -{ - uint speed; - - if (mii_reg & MIIM_VSC8244_AUXCONSTAT_DUPLEX) - priv->duplexity = 1; - else - priv->duplexity = 0; - - speed = mii_reg & MIIM_VSC8244_AUXCONSTAT_SPEED; - switch (speed) { - case MIIM_VSC8244_AUXCONSTAT_GBIT: - priv->speed = 1000; - break; - case MIIM_VSC8244_AUXCONSTAT_100: - priv->speed = 100; + /* Set R100 bit in all modes although + * it is only used in RGMII mode + */ + if (phydev->speed == 100) + ecntrl |= ECNTRL_R100; break; default: - priv->speed = 10; + printf("%s: Speed was bad\n", phydev->dev->name); break; } - return 0; -} - -/* Parse the DM9161's status register for speed and duplex - * information - */ -static uint mii_parse_dm9161_scsr(uint mii_reg, struct tsec_private * priv) -{ - if (mii_reg & (MIIM_DM9161_SCSR_100F | MIIM_DM9161_SCSR_100H)) - priv->speed = 100; - else - priv->speed = 10; - - if (mii_reg & (MIIM_DM9161_SCSR_100F | MIIM_DM9161_SCSR_10F)) - priv->duplexity = 1; - else - priv->duplexity = 0; - - return 0; -} - -/* - * Hack to write all 4 PHYs with the LED values - */ -static uint mii_cis8204_fixled(uint mii_reg, struct tsec_private * priv) -{ - uint phyid; - volatile tsec_mdio_t *regbase = priv->phyregs; - int timeout = 1000000; - - for (phyid = 0; phyid < 4; phyid++) { - regbase->miimadd = (phyid << 8) | mii_reg; - regbase->miimcon = MIIM_CIS8204_SLEDCON_INIT; - asm("sync"); - - timeout = 1000000; - while ((regbase->miimind & MIIMIND_BUSY) && timeout--) ; - } - - return MIIM_CIS8204_SLEDCON_INIT; -} - -static uint mii_cis8204_setmode(uint mii_reg, struct tsec_private * priv) -{ - if (priv->flags & TSEC_REDUCED) - return MIIM_CIS8204_EPHYCON_INIT | MIIM_CIS8204_EPHYCON_RGMII; - else - return MIIM_CIS8204_EPHYCON_INIT; -} - -static uint mii_m88e1111s_setmode(uint mii_reg, struct tsec_private *priv) -{ - uint mii_data = read_phy_reg(priv, mii_reg); - - if (priv->flags & TSEC_REDUCED) - mii_data = (mii_data & 0xfff0) | 0x000b; - return mii_data; -} - -/* Initialized required registers to appropriate values, zeroing - * those we don't care about (unless zero is bad, in which case, - * choose a more appropriate value) - */ -static void init_registers(volatile tsec_t * regs) -{ - /* Clear IEVENT */ - regs->ievent = IEVENT_INIT_CLEAR; - - regs->imask = IMASK_INIT_CLEAR; - - regs->hash.iaddr0 = 0; - regs->hash.iaddr1 = 0; - regs->hash.iaddr2 = 0; - regs->hash.iaddr3 = 0; - regs->hash.iaddr4 = 0; - regs->hash.iaddr5 = 0; - regs->hash.iaddr6 = 0; - regs->hash.iaddr7 = 0; - - regs->hash.gaddr0 = 0; - regs->hash.gaddr1 = 0; - regs->hash.gaddr2 = 0; - regs->hash.gaddr3 = 0; - regs->hash.gaddr4 = 0; - regs->hash.gaddr5 = 0; - regs->hash.gaddr6 = 0; - regs->hash.gaddr7 = 0; - - regs->rctrl = 0x00000000; - - /* Init RMON mib registers */ - memset((void *)&(regs->rmon), 0, sizeof(rmon_mib_t)); - - regs->rmon.cam1 = 0xffffffff; - regs->rmon.cam2 = 0xffffffff; - - regs->mrblr = MRBLR_INIT_SETTINGS; - - regs->minflr = MINFLR_INIT_SETTINGS; - - regs->attr = ATTR_INIT_SETTINGS; - regs->attreli = ATTRELI_INIT_SETTINGS; - -} - -/* Configure maccfg2 based on negotiated speed and duplex - * reported by PHY handling code - */ -static void adjust_link(struct eth_device *dev) -{ - struct tsec_private *priv = (struct tsec_private *)dev->priv; - volatile tsec_t *regs = priv->regs; - - if (priv->link) { - if (priv->duplexity != 0) - regs->maccfg2 |= MACCFG2_FULL_DUPLEX; - else - regs->maccfg2 &= ~(MACCFG2_FULL_DUPLEX); - - switch (priv->speed) { - case 1000: - regs->maccfg2 = ((regs->maccfg2 & ~(MACCFG2_IF)) - | MACCFG2_GMII); - break; - case 100: - case 10: - regs->maccfg2 = ((regs->maccfg2 & ~(MACCFG2_IF)) - | MACCFG2_MII); - - /* Set R100 bit in all modes although - * it is only used in RGMII mode - */ - if (priv->speed == 100) - regs->ecntrl |= ECNTRL_R100; - else - regs->ecntrl &= ~(ECNTRL_R100); - break; - default: - printf("%s: Speed was bad\n", dev->name); - break; - } + out_be32(®s->ecntrl, ecntrl); + out_be32(®s->maccfg2, maccfg2); - printf("Speed: %d, %s duplex%s\n", priv->speed, - (priv->duplexity) ? "full" : "half", - (priv->flags & TSEC_FIBER) ? ", fiber mode" : ""); - - } else { - printf("%s: No link.\n", dev->name); - } + printf("Speed: %d, %s duplex%s\n", phydev->speed, + (phydev->duplex) ? "full" : "half", + (phydev->port == PORT_FIBRE) ? ", fiber mode" : ""); } /* Set up the buffers and their descriptors, and bring up the @@ -969,11 +243,15 @@ static void startup_tsec(struct eth_device *dev) { int i; struct tsec_private *priv = (struct tsec_private *)dev->priv; - volatile tsec_t *regs = priv->regs; + tsec_t *regs = priv->regs; + + /* reset the indices to zero */ + rxIdx = 0; + txIdx = 0; /* Point to the buffer descriptors */ - regs->tbase = (unsigned int)(&rtx.txbd[txIdx]); - regs->rbase = (unsigned int)(&rtx.rxbd[rxIdx]); + out_be32(®s->tbase, (unsigned int)(&rtx.txbd[txIdx])); + out_be32(®s->rbase, (unsigned int)(&rtx.rxbd[rxIdx])); /* Initialize the Rx Buffer descriptors */ for (i = 0; i < PKTBUFSRX; i++) { @@ -991,20 +269,14 @@ static void startup_tsec(struct eth_device *dev) } rtx.txbd[TX_BUF_CNT - 1].status |= TXBD_WRAP; - /* Start up the PHY */ - if(priv->phyinfo) - phy_run_commands(priv, priv->phyinfo->startup); - - adjust_link(dev); - /* Enable Transmit and Receive */ - regs->maccfg1 |= (MACCFG1_RX_EN | MACCFG1_TX_EN); + setbits_be32(®s->maccfg1, MACCFG1_RX_EN | MACCFG1_TX_EN); /* Tell the DMA it is clear to go */ - regs->dmactrl |= DMACTRL_INIT_SETTINGS; - regs->tstat = TSTAT_CLEAR_THALT; - regs->rstat = RSTAT_CLEAR_RHALT; - regs->dmactrl &= ~(DMACTRL_GRS | DMACTRL_GTS); + setbits_be32(®s->dmactrl, DMACTRL_INIT_SETTINGS); + out_be32(®s->tstat, TSTAT_CLEAR_THALT); + out_be32(®s->rstat, RSTAT_CLEAR_RHALT); + clrbits_be32(®s->dmactrl, DMACTRL_GRS | DMACTRL_GTS); } /* This returns the status bits of the device. The return value @@ -1017,7 +289,7 @@ static int tsec_send(struct eth_device *dev, volatile void *packet, int length) int i; int result = 0; struct tsec_private *priv = (struct tsec_private *)dev->priv; - volatile tsec_t *regs = priv->regs; + tsec_t *regs = priv->regs; /* Find an empty buffer descriptor */ for (i = 0; rtx.txbd[txIdx].status & TXBD_READY; i++) { @@ -1033,7 +305,7 @@ static int tsec_send(struct eth_device *dev, volatile void *packet, int length) (TXBD_READY | TXBD_LAST | TXBD_CRC | TXBD_INTERRUPT); /* Tell the DMA to go */ - regs->tstat = TSTAT_CLEAR_THALT; + out_be32(®s->tstat, TSTAT_CLEAR_THALT); /* Wait for buffer to be transmitted */ for (i = 0; rtx.txbd[txIdx].status & TXBD_READY; i++) { @@ -1053,7 +325,7 @@ static int tsec_recv(struct eth_device *dev) { int length; struct tsec_private *priv = (struct tsec_private *)dev->priv; - volatile tsec_t *regs = priv->regs; + tsec_t *regs = priv->regs; while (!(rtx.rxbd[rxIdx].status & RXBD_EMPTY)) { @@ -1076,9 +348,9 @@ static int tsec_recv(struct eth_device *dev) rxIdx = (rxIdx + 1) % PKTBUFSRX; } - if (regs->ievent & IEVENT_BSY) { - regs->ievent = IEVENT_BSY; - regs->rstat = RSTAT_CLEAR_RHALT; + if (in_be32(®s->ievent) & IEVENT_BSY) { + out_be32(®s->ievent, IEVENT_BSY); + out_be32(®s->rstat, RSTAT_CLEAR_RHALT); } return -1; @@ -1089,913 +361,236 @@ static int tsec_recv(struct eth_device *dev) static void tsec_halt(struct eth_device *dev) { struct tsec_private *priv = (struct tsec_private *)dev->priv; - volatile tsec_t *regs = priv->regs; + tsec_t *regs = priv->regs; - regs->dmactrl &= ~(DMACTRL_GRS | DMACTRL_GTS); - regs->dmactrl |= (DMACTRL_GRS | DMACTRL_GTS); + clrbits_be32(®s->dmactrl, DMACTRL_GRS | DMACTRL_GTS); + setbits_be32(®s->dmactrl, DMACTRL_GRS | DMACTRL_GTS); - while ((regs->ievent & (IEVENT_GRSC | IEVENT_GTSC)) - != (IEVENT_GRSC | IEVENT_GTSC)) ; + while ((in_be32(®s->ievent) & (IEVENT_GRSC | IEVENT_GTSC)) + != (IEVENT_GRSC | IEVENT_GTSC)) + ; - regs->maccfg1 &= ~(MACCFG1_TX_EN | MACCFG1_RX_EN); + clrbits_be32(®s->maccfg1, MACCFG1_TX_EN | MACCFG1_RX_EN); /* Shut down the PHY, as needed */ - if(priv->phyinfo) - phy_run_commands(priv, priv->phyinfo->shutdown); + phy_shutdown(priv->phydev); } -static struct phy_info phy_info_M88E1149S = { - 0x1410ca, - "Marvell 88E1149S", - 4, - (struct phy_cmd[]) { /* config */ - /* Reset and configure the PHY */ - {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL}, - {0x1d, 0x1f, NULL}, - {0x1e, 0x200c, NULL}, - {0x1d, 0x5, NULL}, - {0x1e, 0x0, NULL}, - {0x1e, 0x100, NULL}, - {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL}, - {MIIM_ANAR, MIIM_ANAR_INIT, NULL}, - {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL}, - {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init}, - {miim_end,} - }, - (struct phy_cmd[]) { /* startup */ - /* Status is read once to clear old link state */ - {MIIM_STATUS, miim_read, NULL}, - /* Auto-negotiate */ - {MIIM_STATUS, miim_read, &mii_parse_sr}, - /* Read the status */ - {MIIM_88E1011_PHY_STATUS, miim_read, &mii_parse_88E1011_psr}, - {miim_end,} - }, - (struct phy_cmd[]) { /* shutdown */ - {miim_end,} - }, -}; - -/* The 5411 id is 0x206070, the 5421 is 0x2060e0 */ -static struct phy_info phy_info_BCM5461S = { - 0x02060c1, /* 5461 ID */ - "Broadcom BCM5461S", - 0, /* not clear to me what minor revisions we can shift away */ - (struct phy_cmd[]) { /* config */ - /* Reset and configure the PHY */ - {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL}, - {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL}, - {MIIM_ANAR, MIIM_ANAR_INIT, NULL}, - {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL}, - {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init}, - {miim_end,} - }, - (struct phy_cmd[]) { /* startup */ - /* Status is read once to clear old link state */ - {MIIM_STATUS, miim_read, NULL}, - /* Auto-negotiate */ - {MIIM_STATUS, miim_read, &mii_parse_sr}, - /* Read the status */ - {MIIM_BCM54xx_AUXSTATUS, miim_read, &mii_parse_BCM54xx_sr}, - {miim_end,} - }, - (struct phy_cmd[]) { /* shutdown */ - {miim_end,} - }, -}; - -static struct phy_info phy_info_BCM5464S = { - 0x02060b1, /* 5464 ID */ - "Broadcom BCM5464S", - 0, /* not clear to me what minor revisions we can shift away */ - (struct phy_cmd[]) { /* config */ - /* Reset and configure the PHY */ - {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL}, - {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL}, - {MIIM_ANAR, MIIM_ANAR_INIT, NULL}, - {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL}, - {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init}, - {miim_end,} - }, - (struct phy_cmd[]) { /* startup */ - /* Status is read once to clear old link state */ - {MIIM_STATUS, miim_read, NULL}, - /* Auto-negotiate */ - {MIIM_STATUS, miim_read, &mii_parse_sr}, - /* Read the status */ - {MIIM_BCM54xx_AUXSTATUS, miim_read, &mii_parse_BCM54xx_sr}, - {miim_end,} - }, - (struct phy_cmd[]) { /* shutdown */ - {miim_end,} - }, -}; - -static struct phy_info phy_info_BCM5482S = { - 0x0143bcb, - "Broadcom BCM5482S", - 4, - (struct phy_cmd[]) { /* config */ - /* Reset and configure the PHY */ - {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL}, - /* Setup read from auxilary control shadow register 7 */ - {MIIM_BCM54xx_AUXCNTL, MIIM_BCM54xx_AUXCNTL_ENCODE(7), NULL}, - /* Read Misc Control register and or in Ethernet@Wirespeed */ - {MIIM_BCM54xx_AUXCNTL, 0, &mii_BCM54xx_wirespeed}, - {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init}, - /* Initial config/enable of secondary SerDes interface */ - {MIIM_BCM54XX_SHD, MIIM_BCM54XX_SHD_WR_ENCODE(0x14, 0xf), NULL}, - /* Write intial value to secondary SerDes Contol */ - {MIIM_BCM54XX_EXP_SEL, MIIM_BCM54XX_EXP_SEL_SSD | 0, NULL}, - {MIIM_BCM54XX_EXP_DATA, MIIM_CONTROL_RESTART, NULL}, - /* Enable copper/fiber auto-detect */ - {MIIM_BCM54XX_SHD, MIIM_BCM54XX_SHD_WR_ENCODE(0x1e, 0x201)}, - {miim_end,} - }, - (struct phy_cmd[]) { /* startup */ - /* Status is read once to clear old link state */ - {MIIM_STATUS, miim_read, NULL}, - /* Determine copper/fiber, auto-negotiate, and read the result */ - {MIIM_STATUS, miim_read, &mii_parse_BCM5482_sr}, - {miim_end,} - }, - (struct phy_cmd[]) { /* shutdown */ - {miim_end,} - }, -}; - -static struct phy_info phy_info_M88E1011S = { - 0x01410c6, - "Marvell 88E1011S", - 4, - (struct phy_cmd[]) { /* config */ - /* Reset and configure the PHY */ - {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL}, - {0x1d, 0x1f, NULL}, - {0x1e, 0x200c, NULL}, - {0x1d, 0x5, NULL}, - {0x1e, 0x0, NULL}, - {0x1e, 0x100, NULL}, - {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL}, - {MIIM_ANAR, MIIM_ANAR_INIT, NULL}, - {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL}, - {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init}, - {miim_end,} - }, - (struct phy_cmd[]) { /* startup */ - /* Status is read once to clear old link state */ - {MIIM_STATUS, miim_read, NULL}, - /* Auto-negotiate */ - {MIIM_STATUS, miim_read, &mii_parse_sr}, - /* Read the status */ - {MIIM_88E1011_PHY_STATUS, miim_read, &mii_parse_88E1011_psr}, - {miim_end,} - }, - (struct phy_cmd[]) { /* shutdown */ - {miim_end,} - }, -}; - -static struct phy_info phy_info_M88E1111S = { - 0x01410cc, - "Marvell 88E1111S", - 4, - (struct phy_cmd[]) { /* config */ - /* Reset and configure the PHY */ - {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL}, - {0x1b, 0x848f, &mii_m88e1111s_setmode}, - {0x14, 0x0cd2, NULL}, /* Delay RGMII TX and RX */ - {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL}, - {MIIM_ANAR, MIIM_ANAR_INIT, NULL}, - {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL}, - {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init}, - {miim_end,} - }, - (struct phy_cmd[]) { /* startup */ - /* Status is read once to clear old link state */ - {MIIM_STATUS, miim_read, NULL}, - /* Auto-negotiate */ - {MIIM_STATUS, miim_read, &mii_parse_sr}, - /* Read the status */ - {MIIM_88E1011_PHY_STATUS, miim_read, &mii_parse_88E1011_psr}, - {miim_end,} - }, - (struct phy_cmd[]) { /* shutdown */ - {miim_end,} - }, -}; - -static struct phy_info phy_info_M88E1118 = { - 0x01410e1, - "Marvell 88E1118", - 4, - (struct phy_cmd[]) { /* config */ - /* Reset and configure the PHY */ - {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL}, - {0x16, 0x0002, NULL}, /* Change Page Number */ - {0x15, 0x1070, NULL}, /* Delay RGMII TX and RX */ - {0x16, 0x0003, NULL}, /* Change Page Number */ - {0x10, 0x021e, NULL}, /* Adjust LED control */ - {0x16, 0x0000, NULL}, /* Change Page Number */ - {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL}, - {MIIM_ANAR, MIIM_ANAR_INIT, NULL}, - {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL}, - {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init}, - {miim_end,} - }, - (struct phy_cmd[]) { /* startup */ - {0x16, 0x0000, NULL}, /* Change Page Number */ - /* Status is read once to clear old link state */ - {MIIM_STATUS, miim_read, NULL}, - /* Auto-negotiate */ - {MIIM_STATUS, miim_read, &mii_parse_sr}, - /* Read the status */ - {MIIM_88E1011_PHY_STATUS, miim_read, - &mii_parse_88E1011_psr}, - {miim_end,} - }, - (struct phy_cmd[]) { /* shutdown */ - {miim_end,} - }, -}; - -/* - * Since to access LED register we need do switch the page, we - * do LED configuring in the miim_read-like function as follows +/* Initializes data structures and registers for the controller, + * and brings the interface up. Returns the link status, meaning + * that it returns success if the link is up, failure otherwise. + * This allows u-boot to find the first active controller. */ -static uint mii_88E1121_set_led (uint mii_reg, struct tsec_private *priv) +static int tsec_init(struct eth_device *dev, bd_t * bd) { - uint pg; + uint tempval; + char tmpbuf[MAC_ADDR_LEN]; + int i; + struct tsec_private *priv = (struct tsec_private *)dev->priv; + tsec_t *regs = priv->regs; - /* Switch the page to access the led register */ - pg = read_phy_reg(priv, MIIM_88E1121_PHY_PAGE); - write_phy_reg(priv, MIIM_88E1121_PHY_PAGE, MIIM_88E1121_PHY_LED_PAGE); + /* Make sure the controller is stopped */ + tsec_halt(dev); - /* Configure leds */ - write_phy_reg(priv, MIIM_88E1121_PHY_LED_CTRL, - MIIM_88E1121_PHY_LED_DEF); + /* Init MACCFG2. Defaults to GMII */ + out_be32(®s->maccfg2, MACCFG2_INIT_SETTINGS); - /* Restore the page pointer */ - write_phy_reg(priv, MIIM_88E1121_PHY_PAGE, pg); - return 0; -} + /* Init ECNTRL */ + out_be32(®s->ecntrl, ECNTRL_INIT_SETTINGS); -static struct phy_info phy_info_M88E1121R = { - 0x01410cb, - "Marvell 88E1121R", - 4, - (struct phy_cmd[]) { /* config */ - /* Reset and configure the PHY */ - {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL}, - {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL}, - {MIIM_ANAR, MIIM_ANAR_INIT, NULL}, - /* Configure leds */ - {MIIM_88E1121_PHY_LED_CTRL, miim_read, &mii_88E1121_set_led}, - {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init}, - /* Disable IRQs and de-assert interrupt */ - {MIIM_88E1121_PHY_IRQ_EN, 0, NULL}, - {MIIM_88E1121_PHY_IRQ_STATUS, miim_read, NULL}, - {miim_end,} - }, - (struct phy_cmd[]) { /* startup */ - /* Status is read once to clear old link state */ - {MIIM_STATUS, miim_read, NULL}, - {MIIM_STATUS, miim_read, &mii_parse_sr}, - {MIIM_STATUS, miim_read, &mii_parse_link}, - {miim_end,} - }, - (struct phy_cmd[]) { /* shutdown */ - {miim_end,} - }, -}; + /* Copy the station address into the address registers. + * Backwards, because little endian MACS are dumb */ + for (i = 0; i < MAC_ADDR_LEN; i++) + tmpbuf[MAC_ADDR_LEN - 1 - i] = dev->enetaddr[i]; -static unsigned int m88e1145_setmode(uint mii_reg, struct tsec_private *priv) -{ - uint mii_data = read_phy_reg(priv, mii_reg); - - /* Setting MIIM_88E1145_PHY_EXT_CR */ - if (priv->flags & TSEC_REDUCED) - return mii_data | - MIIM_M88E1145_RGMII_RX_DELAY | MIIM_M88E1145_RGMII_TX_DELAY; - else - return mii_data; -} + tempval = (tmpbuf[0] << 24) | (tmpbuf[1] << 16) | (tmpbuf[2] << 8) | + tmpbuf[3]; -static struct phy_info phy_info_M88E1145 = { - 0x01410cd, - "Marvell 88E1145", - 4, - (struct phy_cmd[]) { /* config */ - /* Reset the PHY */ - {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL}, - - /* Errata E0, E1 */ - {29, 0x001b, NULL}, - {30, 0x418f, NULL}, - {29, 0x0016, NULL}, - {30, 0xa2da, NULL}, - - /* Configure the PHY */ - {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL}, - {MIIM_ANAR, MIIM_ANAR_INIT, NULL}, - {MIIM_88E1011_PHY_SCR, MIIM_88E1011_PHY_MDI_X_AUTO, NULL}, - {MIIM_88E1145_PHY_EXT_CR, 0, &m88e1145_setmode}, - {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL}, - {MIIM_CONTROL, MIIM_CONTROL_INIT, NULL}, - {miim_end,} - }, - (struct phy_cmd[]) { /* startup */ - /* Status is read once to clear old link state */ - {MIIM_STATUS, miim_read, NULL}, - /* Auto-negotiate */ - {MIIM_STATUS, miim_read, &mii_parse_sr}, - {MIIM_88E1111_PHY_LED_CONTROL, MIIM_88E1111_PHY_LED_DIRECT, NULL}, - /* Read the Status */ - {MIIM_88E1011_PHY_STATUS, miim_read, &mii_parse_88E1011_psr}, - {miim_end,} - }, - (struct phy_cmd[]) { /* shutdown */ - {miim_end,} - }, -}; + out_be32(®s->macstnaddr1, tempval); -static struct phy_info phy_info_cis8204 = { - 0x3f11, - "Cicada Cis8204", - 6, - (struct phy_cmd[]) { /* config */ - /* Override PHY config settings */ - {MIIM_CIS8201_AUX_CONSTAT, MIIM_CIS8201_AUXCONSTAT_INIT, NULL}, - /* Configure some basic stuff */ - {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init}, - {MIIM_CIS8204_SLED_CON, MIIM_CIS8204_SLEDCON_INIT, - &mii_cis8204_fixled}, - {MIIM_CIS8204_EPHY_CON, MIIM_CIS8204_EPHYCON_INIT, - &mii_cis8204_setmode}, - {miim_end,} - }, - (struct phy_cmd[]) { /* startup */ - /* Read the Status (2x to make sure link is right) */ - {MIIM_STATUS, miim_read, NULL}, - /* Auto-negotiate */ - {MIIM_STATUS, miim_read, &mii_parse_sr}, - /* Read the status */ - {MIIM_CIS8201_AUX_CONSTAT, miim_read, &mii_parse_cis8201}, - {miim_end,} - }, - (struct phy_cmd[]) { /* shutdown */ - {miim_end,} - }, -}; + tempval = *((uint *) (tmpbuf + 4)); -/* Cicada 8201 */ -static struct phy_info phy_info_cis8201 = { - 0xfc41, - "CIS8201", - 4, - (struct phy_cmd[]) { /* config */ - /* Override PHY config settings */ - {MIIM_CIS8201_AUX_CONSTAT, MIIM_CIS8201_AUXCONSTAT_INIT, NULL}, - /* Set up the interface mode */ - {MIIM_CIS8201_EXT_CON1, MIIM_CIS8201_EXTCON1_INIT, NULL}, - /* Configure some basic stuff */ - {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init}, - {miim_end,} - }, - (struct phy_cmd[]) { /* startup */ - /* Read the Status (2x to make sure link is right) */ - {MIIM_STATUS, miim_read, NULL}, - /* Auto-negotiate */ - {MIIM_STATUS, miim_read, &mii_parse_sr}, - /* Read the status */ - {MIIM_CIS8201_AUX_CONSTAT, miim_read, &mii_parse_cis8201}, - {miim_end,} - }, - (struct phy_cmd[]) { /* shutdown */ - {miim_end,} - }, -}; + out_be32(®s->macstnaddr2, tempval); -static struct phy_info phy_info_VSC8211 = { - 0xfc4b, - "Vitesse VSC8211", - 4, - (struct phy_cmd[]) { /* config */ - /* Override PHY config settings */ - {MIIM_CIS8201_AUX_CONSTAT, MIIM_CIS8201_AUXCONSTAT_INIT, NULL}, - /* Set up the interface mode */ - {MIIM_CIS8201_EXT_CON1, MIIM_CIS8201_EXTCON1_INIT, NULL}, - /* Configure some basic stuff */ - {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init}, - {miim_end,} - }, - (struct phy_cmd[]) { /* startup */ - /* Read the Status (2x to make sure link is right) */ - {MIIM_STATUS, miim_read, NULL}, - /* Auto-negotiate */ - {MIIM_STATUS, miim_read, &mii_parse_sr}, - /* Read the status */ - {MIIM_CIS8201_AUX_CONSTAT, miim_read, &mii_parse_cis8201}, - {miim_end,} - }, - (struct phy_cmd[]) { /* shutdown */ - {miim_end,} - }, -}; + /* Clear out (for the most part) the other registers */ + init_registers(regs); -static struct phy_info phy_info_VSC8244 = { - 0x3f1b, - "Vitesse VSC8244", - 6, - (struct phy_cmd[]) { /* config */ - /* Override PHY config settings */ - /* Configure some basic stuff */ - {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init}, - {miim_end,} - }, - (struct phy_cmd[]) { /* startup */ - /* Read the Status (2x to make sure link is right) */ - {MIIM_STATUS, miim_read, NULL}, - /* Auto-negotiate */ - {MIIM_STATUS, miim_read, &mii_parse_sr}, - /* Read the status */ - {MIIM_VSC8244_AUX_CONSTAT, miim_read, &mii_parse_vsc8244}, - {miim_end,} - }, - (struct phy_cmd[]) { /* shutdown */ - {miim_end,} - }, -}; + /* Ready the device for tx/rx */ + startup_tsec(dev); -static struct phy_info phy_info_VSC8641 = { - 0x7043, - "Vitesse VSC8641", - 4, - (struct phy_cmd[]) { /* config */ - /* Configure some basic stuff */ - {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init}, - {miim_end,} - }, - (struct phy_cmd[]) { /* startup */ - /* Read the Status (2x to make sure link is right) */ - {MIIM_STATUS, miim_read, NULL}, - /* Auto-negotiate */ - {MIIM_STATUS, miim_read, &mii_parse_sr}, - /* Read the status */ - {MIIM_VSC8244_AUX_CONSTAT, miim_read, &mii_parse_vsc8244}, - {miim_end,} - }, - (struct phy_cmd[]) { /* shutdown */ - {miim_end,} - }, -}; + /* Start up the PHY */ + phy_startup(priv->phydev); -static struct phy_info phy_info_VSC8221 = { - 0xfc55, - "Vitesse VSC8221", - 4, - (struct phy_cmd[]) { /* config */ - /* Configure some basic stuff */ - {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init}, - {miim_end,} - }, - (struct phy_cmd[]) { /* startup */ - /* Read the Status (2x to make sure link is right) */ - {MIIM_STATUS, miim_read, NULL}, - /* Auto-negotiate */ - {MIIM_STATUS, miim_read, &mii_parse_sr}, - /* Read the status */ - {MIIM_VSC8244_AUX_CONSTAT, miim_read, &mii_parse_vsc8244}, - {miim_end,} - }, - (struct phy_cmd[]) { /* shutdown */ - {miim_end,} - }, -}; + adjust_link(priv, priv->phydev); -static struct phy_info phy_info_VSC8601 = { - 0x00007042, - "Vitesse VSC8601", - 4, - (struct phy_cmd[]) { /* config */ - /* Override PHY config settings */ - /* Configure some basic stuff */ - {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init}, -#ifdef CONFIG_SYS_VSC8601_SKEWFIX - {MIIM_VSC8601_EPHY_CON,MIIM_VSC8601_EPHY_CON_INIT_SKEW,NULL}, -#if defined(CONFIG_SYS_VSC8601_SKEW_TX) && defined(CONFIG_SYS_VSC8601_SKEW_RX) - {MIIM_EXT_PAGE_ACCESS,1,NULL}, -#define VSC8101_SKEW \ - (CONFIG_SYS_VSC8601_SKEW_TX << 14) | (CONFIG_SYS_VSC8601_SKEW_RX << 12) - {MIIM_VSC8601_SKEW_CTRL,VSC8101_SKEW,NULL}, - {MIIM_EXT_PAGE_ACCESS,0,NULL}, -#endif -#endif - {MIIM_ANAR, MIIM_ANAR_INIT, NULL}, - {MIIM_CONTROL, MIIM_CONTROL_RESTART, &mii_cr_init}, - {miim_end,} - }, - (struct phy_cmd[]) { /* startup */ - /* Read the Status (2x to make sure link is right) */ - {MIIM_STATUS, miim_read, NULL}, - /* Auto-negotiate */ - {MIIM_STATUS, miim_read, &mii_parse_sr}, - /* Read the status */ - {MIIM_VSC8244_AUX_CONSTAT, miim_read, &mii_parse_vsc8244}, - {miim_end,} - }, - (struct phy_cmd[]) { /* shutdown */ - {miim_end,} - }, -}; + /* If there's no link, fail */ + return priv->phydev->link ? 0 : -1; +} -static struct phy_info phy_info_dm9161 = { - 0x0181b88, - "Davicom DM9161E", - 4, - (struct phy_cmd[]) { /* config */ - {MIIM_CONTROL, MIIM_DM9161_CR_STOP, NULL}, - /* Do not bypass the scrambler/descrambler */ - {MIIM_DM9161_SCR, MIIM_DM9161_SCR_INIT, NULL}, - /* Clear 10BTCSR to default */ - {MIIM_DM9161_10BTCSR, MIIM_DM9161_10BTCSR_INIT, NULL}, - /* Configure some basic stuff */ - {MIIM_CONTROL, MIIM_CR_INIT, NULL}, - /* Restart Auto Negotiation */ - {MIIM_CONTROL, MIIM_DM9161_CR_RSTAN, NULL}, - {miim_end,} - }, - (struct phy_cmd[]) { /* startup */ - /* Status is read once to clear old link state */ - {MIIM_STATUS, miim_read, NULL}, - /* Auto-negotiate */ - {MIIM_STATUS, miim_read, &mii_parse_sr}, - /* Read the status */ - {MIIM_DM9161_SCSR, miim_read, &mii_parse_dm9161_scsr}, - {miim_end,} - }, - (struct phy_cmd[]) { /* shutdown */ - {miim_end,} - }, -}; +static phy_interface_t tsec_get_interface(struct tsec_private *priv) +{ + tsec_t *regs = priv->regs; + u32 ecntrl; -/* micrel KSZ804 */ -static struct phy_info phy_info_ksz804 = { - 0x0022151, - "Micrel KSZ804 PHY", - 4, - (struct phy_cmd[]) { /* config */ - {MII_BMCR, BMCR_RESET, NULL}, - {MII_BMCR, BMCR_ANENABLE|BMCR_ANRESTART, NULL}, - {miim_end,} - }, - (struct phy_cmd[]) { /* startup */ - {MII_BMSR, miim_read, NULL}, - {MII_BMSR, miim_read, &mii_parse_sr}, - {MII_BMSR, miim_read, &mii_parse_link}, - {miim_end,} - }, - (struct phy_cmd[]) { /* shutdown */ - {miim_end,} - } -}; + ecntrl = in_be32(®s->ecntrl); + + if (ecntrl & ECNTRL_SGMII_MODE) + return PHY_INTERFACE_MODE_SGMII; -/* a generic flavor. */ -static struct phy_info phy_info_generic = { - 0, - "Unknown/Generic PHY", - 32, - (struct phy_cmd[]) { /* config */ - {MII_BMCR, BMCR_RESET, NULL}, - {MII_BMCR, BMCR_ANENABLE|BMCR_ANRESTART, NULL}, - {miim_end,} - }, - (struct phy_cmd[]) { /* startup */ - {MII_BMSR, miim_read, NULL}, - {MII_BMSR, miim_read, &mii_parse_sr}, - {MII_BMSR, miim_read, &mii_parse_link}, - {miim_end,} - }, - (struct phy_cmd[]) { /* shutdown */ - {miim_end,} + if (ecntrl & ECNTRL_TBI_MODE) { + if (ecntrl & ECNTRL_REDUCED_MODE) + return PHY_INTERFACE_MODE_RTBI; + else + return PHY_INTERFACE_MODE_TBI; } -}; -static uint mii_parse_lxt971_sr2(uint mii_reg, struct tsec_private *priv) -{ - unsigned int speed; - if (priv->link) { - speed = mii_reg & MIIM_LXT971_SR2_SPEED_MASK; - - switch (speed) { - case MIIM_LXT971_SR2_10HDX: - priv->speed = 10; - priv->duplexity = 0; - break; - case MIIM_LXT971_SR2_10FDX: - priv->speed = 10; - priv->duplexity = 1; - break; - case MIIM_LXT971_SR2_100HDX: - priv->speed = 100; - priv->duplexity = 0; - break; - default: - priv->speed = 100; - priv->duplexity = 1; + if (ecntrl & ECNTRL_REDUCED_MODE) { + if (ecntrl & ECNTRL_REDUCED_MII_MODE) + return PHY_INTERFACE_MODE_RMII; + else { + phy_interface_t interface = priv->interface; + + /* + * This isn't autodetected, so it must + * be set by the platform code. + */ + if ((interface == PHY_INTERFACE_MODE_RGMII_ID) || + (interface == PHY_INTERFACE_MODE_RGMII_TXID) || + (interface == PHY_INTERFACE_MODE_RGMII_RXID)) + return interface; + + return PHY_INTERFACE_MODE_RGMII; } - } else { - priv->speed = 0; - priv->duplexity = 0; } - return 0; + if (priv->flags & TSEC_GIGABIT) + return PHY_INTERFACE_MODE_GMII; + + return PHY_INTERFACE_MODE_MII; } -static struct phy_info phy_info_lxt971 = { - 0x0001378e, - "LXT971", - 4, - (struct phy_cmd[]) { /* config */ - {MIIM_CR, MIIM_CR_INIT, mii_cr_init}, /* autonegotiate */ - {miim_end,} - }, - (struct phy_cmd[]) { /* startup - enable interrupts */ - /* { 0x12, 0x00f2, NULL }, */ - {MIIM_STATUS, miim_read, NULL}, - {MIIM_STATUS, miim_read, &mii_parse_sr}, - {MIIM_LXT971_SR2, miim_read, &mii_parse_lxt971_sr2}, - {miim_end,} - }, - (struct phy_cmd[]) { /* shutdown - disable interrupts */ - {miim_end,} - }, -}; -/* Parse the DP83865's link and auto-neg status register for speed and duplex - * information +/* Discover which PHY is attached to the device, and configure it + * properly. If the PHY is not recognized, then return 0 + * (failure). Otherwise, return 1 */ -static uint mii_parse_dp83865_lanr(uint mii_reg, struct tsec_private *priv) +static int init_phy(struct eth_device *dev) { - switch (mii_reg & MIIM_DP83865_SPD_MASK) { - - case MIIM_DP83865_SPD_1000: - priv->speed = 1000; - break; - - case MIIM_DP83865_SPD_100: - priv->speed = 100; - break; + struct tsec_private *priv = (struct tsec_private *)dev->priv; + struct phy_device *phydev; + tsec_t *regs = priv->regs; + u32 supported = (SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full | + SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full); - default: - priv->speed = 10; - break; + if (priv->flags & TSEC_GIGABIT) + supported |= SUPPORTED_1000baseT_Full; - } + /* Assign a Physical address to the TBI */ + out_be32(®s->tbipa, CONFIG_SYS_TBIPA_VALUE); - if (mii_reg & MIIM_DP83865_DPX_FULL) - priv->duplexity = 1; - else - priv->duplexity = 0; + priv->interface = tsec_get_interface(priv); - return 0; -} + if (priv->interface == PHY_INTERFACE_MODE_SGMII) + tsec_configure_serdes(priv); -static struct phy_info phy_info_dp83865 = { - 0x20005c7, - "NatSemi DP83865", - 4, - (struct phy_cmd[]) { /* config */ - {MIIM_CONTROL, MIIM_DP83865_CR_INIT, NULL}, - {miim_end,} - }, - (struct phy_cmd[]) { /* startup */ - /* Status is read once to clear old link state */ - {MIIM_STATUS, miim_read, NULL}, - /* Auto-negotiate */ - {MIIM_STATUS, miim_read, &mii_parse_sr}, - /* Read the link and auto-neg status */ - {MIIM_DP83865_LANR, miim_read, &mii_parse_dp83865_lanr}, - {miim_end,} - }, - (struct phy_cmd[]) { /* shutdown */ - {miim_end,} - }, -}; + phydev = phy_connect(priv->bus, priv->phyaddr, dev, priv->interface); -static struct phy_info phy_info_rtl8211b = { - 0x001cc91, - "RealTek RTL8211B", - 4, - (struct phy_cmd[]) { /* config */ - /* Reset and configure the PHY */ - {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL}, - {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL}, - {MIIM_ANAR, MIIM_ANAR_INIT, NULL}, - {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL}, - {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init}, - {miim_end,} - }, - (struct phy_cmd[]) { /* startup */ - /* Status is read once to clear old link state */ - {MIIM_STATUS, miim_read, NULL}, - /* Auto-negotiate */ - {MIIM_STATUS, miim_read, &mii_parse_sr}, - /* Read the status */ - {MIIM_RTL8211B_PHY_STATUS, miim_read, &mii_parse_RTL8211B_sr}, - {miim_end,} - }, - (struct phy_cmd[]) { /* shutdown */ - {miim_end,} - }, -}; + phydev->supported &= supported; + phydev->advertising = phydev->supported; -static struct phy_info *phy_info[] = { - &phy_info_cis8204, - &phy_info_cis8201, - &phy_info_BCM5461S, - &phy_info_BCM5464S, - &phy_info_BCM5482S, - &phy_info_M88E1011S, - &phy_info_M88E1111S, - &phy_info_M88E1118, - &phy_info_M88E1121R, - &phy_info_M88E1145, - &phy_info_M88E1149S, - &phy_info_dm9161, - &phy_info_ksz804, - &phy_info_lxt971, - &phy_info_VSC8211, - &phy_info_VSC8244, - &phy_info_VSC8601, - &phy_info_VSC8641, - &phy_info_VSC8221, - &phy_info_dp83865, - &phy_info_rtl8211b, - &phy_info_generic, /* must be last; has ID 0 and 32 bit mask */ - NULL -}; + priv->phydev = phydev; -/* Grab the identifier of the device's PHY, and search through - * all of the known PHYs to see if one matches. If so, return - * it, if not, return NULL - */ -static struct phy_info *get_phy_info(struct eth_device *dev) -{ - struct tsec_private *priv = (struct tsec_private *)dev->priv; - uint phy_reg, phy_ID; - int i; - struct phy_info *theInfo = NULL; - - /* Grab the bits from PHYIR1, and put them in the upper half */ - phy_reg = read_phy_reg(priv, MIIM_PHYIR1); - phy_ID = (phy_reg & 0xffff) << 16; - - /* Grab the bits from PHYIR2, and put them in the lower half */ - phy_reg = read_phy_reg(priv, MIIM_PHYIR2); - phy_ID |= (phy_reg & 0xffff); - - /* loop through all the known PHY types, and find one that */ - /* matches the ID we read from the PHY. */ - for (i = 0; phy_info[i]; i++) { - if (phy_info[i]->id == (phy_ID >> phy_info[i]->shift)) { - theInfo = phy_info[i]; - break; - } - } + phy_config(phydev); - if (theInfo == &phy_info_generic) { - printf("%s: No support for PHY id %x; assuming generic\n", - dev->name, phy_ID); - } else { - debug("%s: PHY is %s (%x)\n", dev->name, theInfo->name, phy_ID); - } - - return theInfo; + return 1; } -/* Execute the given series of commands on the given device's - * PHY, running functions as necessary +/* Initialize device structure. Returns success if PHY + * initialization succeeded (i.e. if it recognizes the PHY) */ -static void phy_run_commands(struct tsec_private *priv, struct phy_cmd *cmd) +static int tsec_initialize(bd_t *bis, struct tsec_info_struct *tsec_info) { + struct eth_device *dev; int i; - uint result; - volatile tsec_mdio_t *phyregs = priv->phyregs; - - phyregs->miimcfg = MIIMCFG_RESET; + struct tsec_private *priv; - phyregs->miimcfg = MIIMCFG_INIT_VALUE; + dev = (struct eth_device *)malloc(sizeof *dev); - while (phyregs->miimind & MIIMIND_BUSY) ; + if (NULL == dev) + return 0; - for (i = 0; cmd->mii_reg != miim_end; i++) { - if (cmd->mii_data == miim_read) { - result = read_phy_reg(priv, cmd->mii_reg); + memset(dev, 0, sizeof *dev); - if (cmd->funct != NULL) - (*(cmd->funct)) (result, priv); + priv = (struct tsec_private *)malloc(sizeof(*priv)); - } else { - if (cmd->funct != NULL) - result = (*(cmd->funct)) (cmd->mii_reg, priv); - else - result = cmd->mii_data; + if (NULL == priv) + return 0; - write_phy_reg(priv, cmd->mii_reg, result); + privlist[num_tsecs++] = priv; + priv->regs = tsec_info->regs; + priv->phyregs_sgmii = tsec_info->miiregs_sgmii; - } - cmd++; - } -} + priv->phyaddr = tsec_info->phyaddr; + priv->flags = tsec_info->flags; -#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) \ - && !defined(BITBANGMII) + sprintf(dev->name, tsec_info->devname); + priv->interface = tsec_info->interface; + priv->bus = miiphy_get_dev_by_name(tsec_info->mii_devname); + dev->iobase = 0; + dev->priv = priv; + dev->init = tsec_init; + dev->halt = tsec_halt; + dev->send = tsec_send; + dev->recv = tsec_recv; +#ifdef CONFIG_MCAST_TFTP + dev->mcast = tsec_mcast_addr; +#endif -/* - * Read a MII PHY register. - * - * Returns: - * 0 on success - */ -static int tsec_miiphy_read(const char *devname, unsigned char addr, - unsigned char reg, unsigned short *value) -{ - unsigned short ret; - struct tsec_private *priv = privlist[0]; + /* Tell u-boot to get the addr from the env */ + for (i = 0; i < 6; i++) + dev->enetaddr[i] = 0; - if (NULL == priv) { - printf("Can't read PHY at address %d\n", addr); - return -1; - } + eth_register(dev); - ret = (unsigned short)tsec_local_mdio_read(priv->phyregs, addr, reg); - *value = ret; + /* Reset the MAC */ + setbits_be32(&priv->regs->maccfg1, MACCFG1_SOFT_RESET); + udelay(2); /* Soft Reset must be asserted for 3 TX clocks */ + clrbits_be32(&priv->regs->maccfg1, MACCFG1_SOFT_RESET); - return 0; + /* Try to initialize PHY here, and return */ + return init_phy(dev); } /* - * Write a MII PHY register. + * Initialize all the TSEC devices * - * Returns: - * 0 on success + * Returns the number of TSEC devices that were initialized */ -static int tsec_miiphy_write(const char *devname, unsigned char addr, - unsigned char reg, unsigned short value) +int tsec_eth_init(bd_t *bis, struct tsec_info_struct *tsecs, int num) { - struct tsec_private *priv = privlist[0]; + int i; + int ret, count = 0; - if (NULL == priv) { - printf("Can't write PHY at address %d\n", addr); - return -1; + for (i = 0; i < num; i++) { + ret = tsec_initialize(bis, &tsecs[i]); + if (ret > 0) + count += ret; } - tsec_local_mdio_write(priv->phyregs, addr, reg, value); - - return 0; + return count; } -#endif - -#ifdef CONFIG_MCAST_TFTP - -/* CREDITS: linux gianfar driver, slightly adjusted... thanx. */ - -/* Set the appropriate hash bit for the given addr */ - -/* The algorithm works like so: - * 1) Take the Destination Address (ie the multicast address), and - * do a CRC on it (little endian), and reverse the bits of the - * result. - * 2) Use the 8 most significant bits as a hash into a 256-entry - * table. The table is controlled through 8 32-bit registers: - * gaddr0-7. gaddr0's MSB is entry 0, and gaddr7's LSB is - * gaddr7. This means that the 3 most significant bits in the - * hash index which gaddr register to use, and the 5 other bits - * indicate which bit (assuming an IBM numbering scheme, which - * for PowerPC (tm) is usually the case) in the tregister holds - * the entry. */ -static int -tsec_mcast_addr (struct eth_device *dev, u8 mcast_mac, u8 set) +int tsec_standard_init(bd_t *bis) { - struct tsec_private *priv = privlist[1]; - volatile tsec_t *regs = priv->regs; - volatile u32 *reg_array, value; - u8 result, whichbit, whichreg; + struct fsl_pq_mdio_info info; - result = (u8)((ether_crc(MAC_ADDR_LEN,mcast_mac) >> 24) & 0xff); - whichbit = result & 0x1f; /* the 5 LSB = which bit to set */ - whichreg = result >> 5; /* the 3 MSB = which reg to set it in */ - value = (1 << (31-whichbit)); + info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR; + info.name = DEFAULT_MII_NAME; - reg_array = &(regs->hash.gaddr0); + fsl_pq_mdio_init(bis, &info); - if (set) { - reg_array[whichreg] |= value; - } else { - reg_array[whichreg] &= ~value; - } - return 0; + return tsec_eth_init(bis, tsec_info, ARRAY_SIZE(tsec_info)); } -#endif /* Multicast TFTP ? */ + diff --git a/drivers/net/uli526x.c b/drivers/net/uli526x.c index a4624e1..5933bdd 100644 --- a/drivers/net/uli526x.c +++ b/drivers/net/uli526x.c @@ -175,9 +175,9 @@ static u16 read_srom_word(long, int); static void uli526x_descriptor_init(struct uli526x_board_info *, unsigned long); static void allocate_rx_buffer(struct uli526x_board_info *); static void update_cr6(u32, unsigned long); -static u16 phy_read(unsigned long, u8, u8, u32); +static u16 uli_phy_read(unsigned long, u8, u8, u32); static u16 phy_readby_cr10(unsigned long, u8, u8); -static void phy_write(unsigned long, u8, u8, u16, u32); +static void uli_phy_write(unsigned long, u8, u8, u16, u32); static void phy_writeby_cr10(unsigned long, u8, u8, u16); static void phy_write_1bit(unsigned long, u32, u32); static u16 phy_read_1bit(unsigned long, u32); @@ -349,7 +349,7 @@ static void uli526x_disable(struct eth_device *dev) /* Reset & stop ULI526X board */ outl(ULI526X_RESET, db->ioaddr + DCR0); udelay(5); - phy_write(db->ioaddr, db->phy_addr, 0, 0x8000, db->chip_id); + uli_phy_write(db->ioaddr, db->phy_addr, 0, 0x8000, db->chip_id); /* reset the board */ db->cr6_data &= ~(CR6_RXSC | CR6_TXSC); /* Disable Tx/Rx */ @@ -385,7 +385,7 @@ static void uli526x_init(struct eth_device *dev) db->tx_packet_cnt = 0; for (phy_tmp = 0; phy_tmp < 32; phy_tmp++) { /* peer add */ - phy_value = phy_read(db->ioaddr, phy_tmp, 3, db->chip_id); + phy_value = uli_phy_read(db->ioaddr, phy_tmp, 3, db->chip_id); if (phy_value != 0xffff && phy_value != 0) { db->phy_addr = phy_tmp; break; @@ -404,10 +404,10 @@ static void uli526x_init(struct eth_device *dev) if (!(inl(db->ioaddr + DCR12) & 0x8)) { /* Phyxcer capability setting */ - phy_reg_reset = phy_read(db->ioaddr, + phy_reg_reset = uli_phy_read(db->ioaddr, db->phy_addr, 0, db->chip_id); phy_reg_reset = (phy_reg_reset | 0x8000); - phy_write(db->ioaddr, db->phy_addr, 0, + uli_phy_write(db->ioaddr, db->phy_addr, 0, phy_reg_reset, db->chip_id); udelay(500); @@ -781,7 +781,8 @@ static void uli526x_set_phyxcer(struct uli526x_board_info *db) u16 phy_reg; /* Phyxcer capability setting */ - phy_reg = phy_read(db->ioaddr, db->phy_addr, 4, db->chip_id) & ~0x01e0; + phy_reg = uli_phy_read(db->ioaddr, + db->phy_addr, 4, db->chip_id) & ~0x01e0; if (db->media_mode & ULI526X_AUTO) { /* AUTO Mode */ @@ -802,10 +803,10 @@ static void uli526x_set_phyxcer(struct uli526x_board_info *db) phy_reg |= db->PHY_reg4; db->media_mode |= ULI526X_AUTO; } - phy_write(db->ioaddr, db->phy_addr, 4, phy_reg, db->chip_id); + uli_phy_write(db->ioaddr, db->phy_addr, 4, phy_reg, db->chip_id); /* Restart Auto-Negotiation */ - phy_write(db->ioaddr, db->phy_addr, 0, 0x1200, db->chip_id); + uli_phy_write(db->ioaddr, db->phy_addr, 0, 0x1200, db->chip_id); udelay(50); } @@ -813,7 +814,7 @@ static void uli526x_set_phyxcer(struct uli526x_board_info *db) * Write a word to Phy register */ -static void phy_write(unsigned long iobase, u8 phy_addr, u8 offset, +static void uli_phy_write(unsigned long iobase, u8 phy_addr, u8 offset, u16 phy_data, u32 chip_id) { u16 i; @@ -862,7 +863,8 @@ static void phy_write(unsigned long iobase, u8 phy_addr, u8 offset, * Read a word data from phy register */ -static u16 phy_read(unsigned long iobase, u8 phy_addr, u8 offset, u32 chip_id) +static u16 uli_phy_read(unsigned long iobase, u8 phy_addr, u8 offset, + u32 chip_id) { int i; u16 phy_data; diff --git a/drivers/pci/fsl_pci_init.c b/drivers/pci/fsl_pci_init.c index dc34bd6..ab461b4 100644 --- a/drivers/pci/fsl_pci_init.c +++ b/drivers/pci/fsl_pci_init.c @@ -1,5 +1,5 @@ /* - * Copyright 2007-2010 Freescale Semiconductor, Inc. + * Copyright 2007-2011 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the Free @@ -223,6 +223,7 @@ void fsl_pci_init(struct pci_controller *hose, struct fsl_pci_info *pci_info) u32 cfg_data = (u32)&((ccsr_fsl_pci_t *)pci_info->regs)->cfg_data; u16 temp16; u32 temp32; + u32 block_rev; int enabled, r, inbound = 0; u16 ltssm; u8 temp8, pcie_cap; @@ -232,13 +233,20 @@ void fsl_pci_init(struct pci_controller *hose, struct fsl_pci_info *pci_info) /* Initialize ATMU registers based on hose regions and flags */ volatile pot_t *po = &pci->pot[1]; /* skip 0 */ - volatile pit_t *pi = &pci->pit[2]; /* ranges from: 3 to 1 */ + volatile pit_t *pi; u64 out_hi = 0, out_lo = -1ULL; u32 pcicsrbar, pcicsrbar_sz; pci_setup_indirect(hose, cfg_addr, cfg_data); + block_rev = in_be32(&pci->block_rev1); + if (PEX_IP_BLK_REV_2_2 <= block_rev) { + pi = &pci->pit[2]; /* 0xDC0 */ + } else { + pi = &pci->pit[3]; /* 0xDE0 */ + } + /* Handle setup of outbound windows first */ for (r = 0; r < hose->region_count; r++) { unsigned long flags = hose->regions[r].flags; diff --git a/drivers/power/ftpmu010.c b/drivers/power/ftpmu010.c index 7924ac1..df99dfa 100644 --- a/drivers/power/ftpmu010.c +++ b/drivers/power/ftpmu010.c @@ -23,12 +23,12 @@ #include <common.h> #include <asm/io.h> -#include "ftpmu010.h" - -static struct ftpmu010 *pmu = (struct ftpmu010 *)CONFIG_FTPMU010_BASE; +#include <faraday/ftpmu010.h> +/* OSCC: OSC Control Register */ void ftpmu010_32768osc_enable(void) { + static struct ftpmu010 *pmu = (struct ftpmu010 *)CONFIG_FTPMU010_BASE; unsigned int oscc; /* enable the 32768Hz oscillator */ @@ -46,8 +46,31 @@ void ftpmu010_32768osc_enable(void) writel(oscc, &pmu->OSCC); } +/* MFPSR: Multi-Function Port Setting Register */ +void ftpmu010_mfpsr_select_dev(unsigned int dev) +{ + static struct ftpmu010 *pmu = (struct ftpmu010 *)CONFIG_FTPMU010_BASE; + unsigned int mfpsr; + + mfpsr = readl(&pmu->MFPSR); + mfpsr |= dev; + writel(mfpsr, &pmu->MFPSR); +} + +void ftpmu010_mfpsr_diselect_dev(unsigned int dev) +{ + static struct ftpmu010 *pmu = (struct ftpmu010 *)CONFIG_FTPMU010_BASE; + unsigned int mfpsr; + + mfpsr = readl(&pmu->MFPSR); + mfpsr &= ~dev; + writel(mfpsr, &pmu->MFPSR); +} + +/* PDLLCR0: PLL/DLL Control Register 0 */ void ftpmu010_dlldis_disable(void) { + static struct ftpmu010 *pmu = (struct ftpmu010 *)CONFIG_FTPMU010_BASE; unsigned int pdllcr0; pdllcr0 = readl(&pmu->PDLLCR0); @@ -57,9 +80,21 @@ void ftpmu010_dlldis_disable(void) void ftpmu010_sdram_clk_disable(unsigned int cr0) { + static struct ftpmu010 *pmu = (struct ftpmu010 *)CONFIG_FTPMU010_BASE; unsigned int pdllcr0; pdllcr0 = readl(&pmu->PDLLCR0); pdllcr0 |= FTPMU010_PDLLCR0_HCLKOUTDIS(cr0); writel(pdllcr0, &pmu->PDLLCR0); } + +/* SDRAMHTC: SDRAM Signal Hold Time Control */ +void ftpmu010_sdramhtc_set(unsigned int val) +{ + static struct ftpmu010 *pmu = (struct ftpmu010 *)CONFIG_FTPMU010_BASE; + unsigned int sdramhtc; + + sdramhtc = readl(&pmu->SDRAMHTC); + sdramhtc |= val; + writel(sdramhtc, &pmu->SDRAMHTC); +} diff --git a/drivers/qe/uec.c b/drivers/qe/uec.c index 282ab23..1ecb137 100644 --- a/drivers/qe/uec.c +++ b/drivers/qe/uec.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2006-2010 Freescale Semiconductor, Inc. + * Copyright (C) 2006-2011 Freescale Semiconductor, Inc. * * Dave Liu <daveliu@freescale.com> * @@ -30,6 +30,7 @@ #include "uec.h" #include "uec_phy.h" #include "miiphy.h" +#include <phy.h> /* Default UTBIPAR SMI address */ #ifndef CONFIG_UTBIPAR_INIT_TBIPA @@ -67,9 +68,6 @@ static uec_info_t uec_info[] = { static struct eth_device *devlist[MAXCONTROLLERS]; -u16 phy_read (struct uec_mii_info *mii_info, u16 regnum); -void phy_write (struct uec_mii_info *mii_info, u16 regnum, u16 val); - static int uec_mac_enable(uec_private_t *uec, comm_dir_e mode) { uec_t *uec_regs; @@ -324,9 +322,9 @@ static int uec_set_mac_duplex(uec_private_t *uec, int duplex) } static int uec_set_mac_if_mode(uec_private_t *uec, - enum fsl_phy_enet_if if_mode, int speed) + phy_interface_t if_mode, int speed) { - enum fsl_phy_enet_if enet_if_mode; + phy_interface_t enet_if_mode; uec_info_t *uec_info; uec_t *uec_regs; u32 upsmr; @@ -348,15 +346,15 @@ static int uec_set_mac_if_mode(uec_private_t *uec, upsmr &= ~(UPSMR_RPM | UPSMR_TBIM | UPSMR_R10M | UPSMR_RMM); switch (speed) { - case 10: + case SPEED_10: maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE; switch (enet_if_mode) { - case MII: + case PHY_INTERFACE_MODE_MII: break; - case RGMII: + case PHY_INTERFACE_MODE_RGMII: upsmr |= (UPSMR_RPM | UPSMR_R10M); break; - case RMII: + case PHY_INTERFACE_MODE_RMII: upsmr |= (UPSMR_R10M | UPSMR_RMM); break; default: @@ -364,15 +362,15 @@ static int uec_set_mac_if_mode(uec_private_t *uec, break; } break; - case 100: + case SPEED_100: maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE; switch (enet_if_mode) { - case MII: + case PHY_INTERFACE_MODE_MII: break; - case RGMII: + case PHY_INTERFACE_MODE_RGMII: upsmr |= UPSMR_RPM; break; - case RMII: + case PHY_INTERFACE_MODE_RMII: upsmr |= UPSMR_RMM; break; default: @@ -380,23 +378,24 @@ static int uec_set_mac_if_mode(uec_private_t *uec, break; } break; - case 1000: + case SPEED_1000: maccfg2 |= MACCFG2_INTERFACE_MODE_BYTE; switch (enet_if_mode) { - case GMII: + case PHY_INTERFACE_MODE_GMII: break; - case TBI: + case PHY_INTERFACE_MODE_TBI: upsmr |= UPSMR_TBIM; break; - case RTBI: + case PHY_INTERFACE_MODE_RTBI: upsmr |= (UPSMR_RPM | UPSMR_TBIM); break; - case RGMII_RXID: - case RGMII_ID: - case RGMII: + case PHY_INTERFACE_MODE_RGMII_RXID: + case PHY_INTERFACE_MODE_RGMII_TXID: + case PHY_INTERFACE_MODE_RGMII_ID: + case PHY_INTERFACE_MODE_RGMII: upsmr |= UPSMR_RPM; break; - case SGMII: + case PHY_INTERFACE_MODE_SGMII: upsmr |= UPSMR_SGMM; break; default: @@ -521,7 +520,7 @@ static void adjust_link(struct eth_device *dev) struct uec_mii_info *mii_info = uec->mii_info; extern void change_phy_interface_mode(struct eth_device *dev, - enum fsl_phy_enet_if mode, int speed); + phy_interface_t mode, int speed); uec_regs = uec->uec_regs; if (mii_info->link) { @@ -539,19 +538,19 @@ static void adjust_link(struct eth_device *dev) } if (mii_info->speed != uec->oldspeed) { - enum fsl_phy_enet_if mode = \ + phy_interface_t mode = uec->uec_info->enet_interface_type; if (uec->uec_info->uf_info.eth_type == GIGA_ETH) { switch (mii_info->speed) { - case 1000: + case SPEED_1000: break; - case 100: + case SPEED_100: printf ("switching to rgmii 100\n"); - mode = RGMII; + mode = PHY_INTERFACE_MODE_RGMII; break; - case 10: + case SPEED_10: printf ("switching to rgmii 10\n"); - mode = RGMII; + mode = PHY_INTERFACE_MODE_RGMII; break; default: printf("%s: Ack,Speed(%d)is illegal\n", @@ -588,9 +587,27 @@ static void phy_change(struct eth_device *dev) { uec_private_t *uec = (uec_private_t *)dev->priv; +#if defined(CONFIG_P1012) || defined(CONFIG_P1016) || \ + defined(CONFIG_P1021) || defined(CONFIG_P1025) + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + + /* QE9 and QE12 need to be set for enabling QE MII managment signals */ + setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_QE9); + setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_QE12); +#endif + /* Update the link, speed, duplex */ uec->mii_info->phyinfo->read_status(uec->mii_info); +#if defined(CONFIG_P1012) || defined(CONFIG_P1016) || \ + defined(CONFIG_P1021) || defined(CONFIG_P1025) + /* + * QE12 is muxed with LBCTL, it needs to be released for enabling + * LBCTL signal for LBC usage. + */ + clrbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_QE12); +#endif + /* Adjust the interface according to speed */ adjust_link(dev); } @@ -1097,8 +1114,8 @@ static int uec_startup(uec_private_t *uec) out_be32(&uec_regs->utbipar, utbipar); /* Configure the TBI for SGMII operation */ - if ((uec->uec_info->enet_interface_type == SGMII) && - (uec->uec_info->speed == 1000)) { + if ((uec->uec_info->enet_interface_type == PHY_INTERFACE_MODE_SGMII) && + (uec->uec_info->speed == SPEED_1000)) { uec_write_phy_reg(uec->dev, uec_regs->utbipar, ENET_TBI_MII_ANA, TBIANA_SETTINGS); @@ -1198,10 +1215,21 @@ static int uec_init(struct eth_device* dev, bd_t *bd) uec_private_t *uec; int err, i; struct phy_info *curphy; +#if defined(CONFIG_P1012) || defined(CONFIG_P1016) || \ + defined(CONFIG_P1021) || defined(CONFIG_P1025) + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); +#endif uec = (uec_private_t *)dev->priv; if (uec->the_first_run == 0) { +#if defined(CONFIG_P1012) || defined(CONFIG_P1016) || \ + defined(CONFIG_P1021) || defined(CONFIG_P1025) + /* QE9 and QE12 need to be set for enabling QE MII managment signals */ + setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_QE9); + setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_QE12); +#endif + err = init_phy(dev); if (err) { printf("%s: Cannot initialize PHY, aborting.\n", @@ -1228,6 +1256,12 @@ static int uec_init(struct eth_device* dev, bd_t *bd) udelay(100000); } while (1); +#if defined(CONFIG_P1012) || defined(CONFIG_P1016) || \ + defined(CONFIG_P1021) || defined(CONFIG_P1025) + /* QE12 needs to be released for enabling LBCTL signal*/ + clrbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_QE12); +#endif + if (err || i <= 0) printf("warning: %s: timeout on PHY link\n", dev->name); diff --git a/drivers/qe/uec.h b/drivers/qe/uec.h index 94eb9a2..e63bf3a 100644 --- a/drivers/qe/uec.h +++ b/drivers/qe/uec.h @@ -25,6 +25,7 @@ #include "qe.h" #include "uccf.h" +#include <phy.h> #include <asm/fsl_enet.h> #define MAX_TX_THREADS 8 @@ -691,7 +692,7 @@ typedef struct uec_info { u16 rx_bd_ring_len; u16 tx_bd_ring_len; u8 phy_address; - enum fsl_phy_enet_if enet_interface_type; + phy_interface_t enet_interface_type; int speed; } uec_info_t; diff --git a/drivers/qe/uec_phy.c b/drivers/qe/uec_phy.c index 55c2622..e26218b 100644 --- a/drivers/qe/uec_phy.c +++ b/drivers/qe/uec_phy.c @@ -25,6 +25,7 @@ #include "uec.h" #include "uec_phy.h" #include "miiphy.h" +#include <phy.h> #define ugphy_printk(format, arg...) \ printf(format "\n", ## arg) @@ -121,8 +122,8 @@ static int gbit_config_aneg (struct uec_mii_info *mii_info); static int genmii_config_aneg (struct uec_mii_info *mii_info); static int genmii_update_link (struct uec_mii_info *mii_info); static int genmii_read_status (struct uec_mii_info *mii_info); -u16 phy_read (struct uec_mii_info *mii_info, u16 regnum); -void phy_write (struct uec_mii_info *mii_info, u16 regnum, u16 val); +u16 uec_phy_read(struct uec_mii_info *mii_info, u16 regnum); +void uec_phy_write(struct uec_mii_info *mii_info, u16 regnum, u16 val); /* Write value to the PHY for this device to the register at regnum, */ /* waiting until the write is done before it returns. All PHY */ @@ -242,7 +243,7 @@ static void config_genmii_advert (struct uec_mii_info *mii_info) advertise = mii_info->advertising; /* Setup standard advertisement */ - adv = phy_read (mii_info, MII_ADVERTISE); + adv = uec_phy_read(mii_info, MII_ADVERTISE); adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4); if (advertise & ADVERTISED_10baseT_Half) adv |= ADVERTISE_10HALF; @@ -252,7 +253,7 @@ static void config_genmii_advert (struct uec_mii_info *mii_info) adv |= ADVERTISE_100HALF; if (advertise & ADVERTISED_100baseT_Full) adv |= ADVERTISE_100FULL; - phy_write (mii_info, MII_ADVERTISE, adv); + uec_phy_write(mii_info, MII_ADVERTISE, adv); } static void genmii_setup_forced (struct uec_mii_info *mii_info) @@ -260,7 +261,7 @@ static void genmii_setup_forced (struct uec_mii_info *mii_info) u16 ctrl; u32 features = mii_info->phyinfo->features; - ctrl = phy_read (mii_info, MII_BMCR); + ctrl = uec_phy_read(mii_info, MII_BMCR); ctrl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_SPEED1000 | BMCR_ANENABLE); @@ -290,7 +291,7 @@ static void genmii_setup_forced (struct uec_mii_info *mii_info) break; } - phy_write (mii_info, MII_BMCR, ctrl); + uec_phy_write(mii_info, MII_BMCR, ctrl); } /* Enable and Restart Autonegotiation */ @@ -298,9 +299,9 @@ static void genmii_restart_aneg (struct uec_mii_info *mii_info) { u16 ctl; - ctl = phy_read (mii_info, MII_BMCR); + ctl = uec_phy_read(mii_info, MII_BMCR); ctl |= (BMCR_ANENABLE | BMCR_ANRESTART); - phy_write (mii_info, MII_BMCR, ctl); + uec_phy_write(mii_info, MII_BMCR, ctl); } static int gbit_config_aneg (struct uec_mii_info *mii_info) @@ -313,14 +314,14 @@ static int gbit_config_aneg (struct uec_mii_info *mii_info) config_genmii_advert (mii_info); advertise = mii_info->advertising; - adv = phy_read (mii_info, MII_CTRL1000); + adv = uec_phy_read(mii_info, MII_CTRL1000); adv &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF); if (advertise & SUPPORTED_1000baseT_Half) adv |= ADVERTISE_1000HALF; if (advertise & SUPPORTED_1000baseT_Full) adv |= ADVERTISE_1000FULL; - phy_write (mii_info, MII_CTRL1000, adv); + uec_phy_write(mii_info, MII_CTRL1000, adv); /* Start/Restart aneg */ genmii_restart_aneg (mii_info); @@ -335,13 +336,13 @@ static int marvell_config_aneg (struct uec_mii_info *mii_info) /* The Marvell PHY has an errata which requires * that certain registers get written in order * to restart autonegotiation */ - phy_write (mii_info, MII_BMCR, BMCR_RESET); + uec_phy_write(mii_info, MII_BMCR, BMCR_RESET); - phy_write (mii_info, 0x1d, 0x1f); - phy_write (mii_info, 0x1e, 0x200c); - phy_write (mii_info, 0x1d, 0x5); - phy_write (mii_info, 0x1e, 0); - phy_write (mii_info, 0x1e, 0x100); + uec_phy_write(mii_info, 0x1d, 0x1f); + uec_phy_write(mii_info, 0x1e, 0x200c); + uec_phy_write(mii_info, 0x1d, 0x5); + uec_phy_write(mii_info, 0x1e, 0); + uec_phy_write(mii_info, 0x1e, 0x100); gbit_config_aneg (mii_info); @@ -373,13 +374,13 @@ static int genmii_update_link (struct uec_mii_info *mii_info) u16 status; /* Status is read once to clear old link state */ - phy_read (mii_info, MII_BMSR); + uec_phy_read(mii_info, MII_BMSR); /* * Wait if the link is up, and autonegotiation is in progress * (ie - we're capable and it's not done) */ - status = phy_read(mii_info, MII_BMSR); + status = uec_phy_read(mii_info, MII_BMSR); if ((status & BMSR_LSTATUS) && (status & BMSR_ANEGCAPABLE) && !(status & BMSR_ANEGCOMPLETE)) { int i = 0; @@ -395,7 +396,7 @@ static int genmii_update_link (struct uec_mii_info *mii_info) i++; udelay(1000); /* 1 ms */ - status = phy_read(mii_info, MII_BMSR); + status = uec_phy_read(mii_info, MII_BMSR); } mii_info->link = 1; } else { @@ -420,7 +421,7 @@ static int genmii_read_status (struct uec_mii_info *mii_info) return err; if (mii_info->autoneg) { - status = phy_read(mii_info, MII_STAT1000); + status = uec_phy_read(mii_info, MII_STAT1000); if (status & (LPA_1000FULL | LPA_1000HALF)) { mii_info->speed = SPEED_1000; @@ -429,7 +430,7 @@ static int genmii_read_status (struct uec_mii_info *mii_info) else mii_info->duplex = DUPLEX_HALF; } else { - status = phy_read(mii_info, MII_LPA); + status = uec_phy_read(mii_info, MII_LPA); if (status & (LPA_10FULL | LPA_100FULL)) mii_info->duplex = DUPLEX_FULL; @@ -456,62 +457,63 @@ static int bcm_init(struct uec_mii_info *mii_info) gbit_config_aneg(mii_info); - if ((uec->uec_info->enet_interface_type == RGMII_RXID) && - (uec->uec_info->speed == 1000)) { + if ((uec->uec_info->enet_interface_type == + PHY_INTERFACE_MODE_RGMII_RXID) && + (uec->uec_info->speed == SPEED_1000)) { u16 val; int cnt = 50; /* Wait for aneg to complete. */ do - val = phy_read(mii_info, MII_BMSR); + val = uec_phy_read(mii_info, MII_BMSR); while (--cnt && !(val & BMSR_ANEGCOMPLETE)); /* Set RDX clk delay. */ - phy_write(mii_info, 0x18, 0x7 | (7 << 12)); + uec_phy_write(mii_info, 0x18, 0x7 | (7 << 12)); - val = phy_read(mii_info, 0x18); + val = uec_phy_read(mii_info, 0x18); /* Set RDX-RXC skew. */ val |= (1 << 8); val |= (7 | (7 << 12)); /* Write bits 14:0. */ val |= (1 << 15); - phy_write(mii_info, 0x18, val); + uec_phy_write(mii_info, 0x18, val); } return 0; } -static int marvell_init(struct uec_mii_info *mii_info) +static int uec_marvell_init(struct uec_mii_info *mii_info) { struct eth_device *edev = mii_info->dev; uec_private_t *uec = edev->priv; - enum fsl_phy_enet_if iface = uec->uec_info->enet_interface_type; + phy_interface_t iface = uec->uec_info->enet_interface_type; int speed = uec->uec_info->speed; - if ((speed == 1000) && - (iface == RGMII_ID || - iface == RGMII_RXID || - iface == RGMII_TXID)) { + if ((speed == SPEED_1000) && + (iface == PHY_INTERFACE_MODE_RGMII_ID || + iface == PHY_INTERFACE_MODE_RGMII_RXID || + iface == PHY_INTERFACE_MODE_RGMII_TXID)) { int temp; - temp = phy_read(mii_info, MII_M1111_PHY_EXT_CR); - if (iface == RGMII_ID) { + temp = uec_phy_read(mii_info, MII_M1111_PHY_EXT_CR); + if (iface == PHY_INTERFACE_MODE_RGMII_ID) { temp |= MII_M1111_RX_DELAY | MII_M1111_TX_DELAY; - } else if (iface == RGMII_RXID) { + } else if (iface == PHY_INTERFACE_MODE_RGMII_RXID) { temp &= ~MII_M1111_TX_DELAY; temp |= MII_M1111_RX_DELAY; - } else if (iface == RGMII_TXID) { + } else if (iface == PHY_INTERFACE_MODE_RGMII_TXID) { temp &= ~MII_M1111_RX_DELAY; temp |= MII_M1111_TX_DELAY; } - phy_write(mii_info, MII_M1111_PHY_EXT_CR, temp); + uec_phy_write(mii_info, MII_M1111_PHY_EXT_CR, temp); - temp = phy_read(mii_info, MII_M1111_PHY_EXT_SR); + temp = uec_phy_read(mii_info, MII_M1111_PHY_EXT_SR); temp &= ~MII_M1111_HWCFG_MODE_MASK; temp |= MII_M1111_HWCFG_MODE_RGMII; - phy_write(mii_info, MII_M1111_PHY_EXT_SR, temp); + uec_phy_write(mii_info, MII_M1111_PHY_EXT_SR, temp); - phy_write(mii_info, MII_BMCR, BMCR_RESET); + uec_phy_write(mii_info, MII_BMCR, BMCR_RESET); } return 0; @@ -534,7 +536,7 @@ static int marvell_read_status (struct uec_mii_info *mii_info) if (mii_info->autoneg && mii_info->link) { int speed; - status = phy_read (mii_info, MII_M1011_PHY_SPEC_STATUS); + status = uec_phy_read(mii_info, MII_M1011_PHY_SPEC_STATUS); /* Get the duplexity */ if (status & MII_M1011_PHY_SPEC_STATUS_FULLDUPLEX) @@ -564,7 +566,7 @@ static int marvell_read_status (struct uec_mii_info *mii_info) static int marvell_ack_interrupt (struct uec_mii_info *mii_info) { /* Clear the interrupts by reading the reg */ - phy_read (mii_info, MII_M1011_IEVENT); + uec_phy_read(mii_info, MII_M1011_IEVENT); return 0; } @@ -572,9 +574,10 @@ static int marvell_ack_interrupt (struct uec_mii_info *mii_info) static int marvell_config_intr (struct uec_mii_info *mii_info) { if (mii_info->interrupts == MII_INTERRUPT_ENABLED) - phy_write (mii_info, MII_M1011_IMASK, MII_M1011_IMASK_INIT); + uec_phy_write(mii_info, MII_M1011_IMASK, MII_M1011_IMASK_INIT); else - phy_write (mii_info, MII_M1011_IMASK, MII_M1011_IMASK_CLEAR); + uec_phy_write(mii_info, MII_M1011_IMASK, + MII_M1011_IMASK_CLEAR); return 0; } @@ -582,13 +585,13 @@ static int marvell_config_intr (struct uec_mii_info *mii_info) static int dm9161_init (struct uec_mii_info *mii_info) { /* Reset the PHY */ - phy_write (mii_info, MII_BMCR, phy_read (mii_info, MII_BMCR) | + uec_phy_write(mii_info, MII_BMCR, uec_phy_read(mii_info, MII_BMCR) | BMCR_RESET); /* PHY and MAC connect */ - phy_write (mii_info, MII_BMCR, phy_read (mii_info, MII_BMCR) & + uec_phy_write(mii_info, MII_BMCR, uec_phy_read(mii_info, MII_BMCR) & ~BMCR_ISOLATE); - phy_write (mii_info, MII_DM9161_SCR, MII_DM9161_SCR_INIT); + uec_phy_write(mii_info, MII_DM9161_SCR, MII_DM9161_SCR_INIT); config_genmii_advert (mii_info); /* Start/restart aneg */ @@ -614,7 +617,7 @@ static int dm9161_read_status (struct uec_mii_info *mii_info) /* If the link is up, read the speed and duplex If we aren't autonegotiating assume speeds are as set */ if (mii_info->autoneg && mii_info->link) { - status = phy_read (mii_info, MII_DM9161_SCSR); + status = uec_phy_read(mii_info, MII_DM9161_SCSR); if (status & (MII_DM9161_SCSR_100F | MII_DM9161_SCSR_100H)) mii_info->speed = SPEED_100; else @@ -632,7 +635,7 @@ static int dm9161_read_status (struct uec_mii_info *mii_info) static int dm9161_ack_interrupt (struct uec_mii_info *mii_info) { /* Clear the interrupt by reading the reg */ - phy_read (mii_info, MII_DM9161_INTR); + uec_phy_read(mii_info, MII_DM9161_INTR); return 0; } @@ -640,9 +643,9 @@ static int dm9161_ack_interrupt (struct uec_mii_info *mii_info) static int dm9161_config_intr (struct uec_mii_info *mii_info) { if (mii_info->interrupts == MII_INTERRUPT_ENABLED) - phy_write (mii_info, MII_DM9161_INTR, MII_DM9161_INTR_INIT); + uec_phy_write(mii_info, MII_DM9161_INTR, MII_DM9161_INTR_INIT); else - phy_write (mii_info, MII_DM9161_INTR, MII_DM9161_INTR_STOP); + uec_phy_write(mii_info, MII_DM9161_INTR, MII_DM9161_INTR_STOP); return 0; } @@ -696,7 +699,7 @@ static int smsc_read_status (struct uec_mii_info *mii_info) if (mii_info->autoneg && mii_info->link) { int val; - status = phy_read (mii_info, 0x1f); + status = uec_phy_read(mii_info, 0x1f); val = (status & 0x1c) >> 2; switch (val) { @@ -751,7 +754,7 @@ static struct phy_info phy_info_marvell = { .phy_id_mask = 0xffffff00, .name = "Marvell 88E11x1", .features = MII_GBIT_FEATURES, - .init = &marvell_init, + .init = &uec_marvell_init, .config_aneg = &marvell_config_aneg, .read_status = &marvell_read_status, .ack_interrupt = &marvell_ack_interrupt, @@ -804,12 +807,12 @@ static struct phy_info *phy_info[] = { NULL }; -u16 phy_read (struct uec_mii_info *mii_info, u16 regnum) +u16 uec_phy_read(struct uec_mii_info *mii_info, u16 regnum) { return mii_info->mdio_read (mii_info->dev, mii_info->mii_id, regnum); } -void phy_write (struct uec_mii_info *mii_info, u16 regnum, u16 val) +void uec_phy_write(struct uec_mii_info *mii_info, u16 regnum, u16 val) { mii_info->mdio_write (mii_info->dev, mii_info->mii_id, regnum, val); } @@ -825,11 +828,11 @@ struct phy_info *uec_get_phy_info (struct uec_mii_info *mii_info) struct phy_info *theInfo = NULL; /* Grab the bits from PHYIR1, and put them in the upper half */ - phy_reg = phy_read (mii_info, MII_PHYSID1); + phy_reg = uec_phy_read(mii_info, MII_PHYSID1); phy_ID = (phy_reg & 0xffff) << 16; /* Grab the bits from PHYIR2, and put them in the lower half */ - phy_reg = phy_read (mii_info, MII_PHYSID2); + phy_reg = uec_phy_read(mii_info, MII_PHYSID2); phy_ID |= (phy_reg & 0xffff); /* loop through all the known PHY types, and find one that */ @@ -852,10 +855,8 @@ struct phy_info *uec_get_phy_info (struct uec_mii_info *mii_info) return theInfo; } -void marvell_phy_interface_mode (struct eth_device *dev, - enum fsl_phy_enet_if type, - int speed - ) +void marvell_phy_interface_mode(struct eth_device *dev, phy_interface_t type, + int speed) { uec_private_t *uec = (uec_private_t *) dev->priv; struct uec_mii_info *mii_info; @@ -867,47 +868,47 @@ void marvell_phy_interface_mode (struct eth_device *dev, } mii_info = uec->mii_info; - if (type == RGMII) { - if (speed == 100) { - phy_write (mii_info, 0x00, 0x9140); - phy_write (mii_info, 0x1d, 0x001f); - phy_write (mii_info, 0x1e, 0x200c); - phy_write (mii_info, 0x1d, 0x0005); - phy_write (mii_info, 0x1e, 0x0000); - phy_write (mii_info, 0x1e, 0x0100); - phy_write (mii_info, 0x09, 0x0e00); - phy_write (mii_info, 0x04, 0x01e1); - phy_write (mii_info, 0x00, 0x9140); - phy_write (mii_info, 0x00, 0x1000); + if (type == PHY_INTERFACE_MODE_RGMII) { + if (speed == SPEED_100) { + uec_phy_write(mii_info, 0x00, 0x9140); + uec_phy_write(mii_info, 0x1d, 0x001f); + uec_phy_write(mii_info, 0x1e, 0x200c); + uec_phy_write(mii_info, 0x1d, 0x0005); + uec_phy_write(mii_info, 0x1e, 0x0000); + uec_phy_write(mii_info, 0x1e, 0x0100); + uec_phy_write(mii_info, 0x09, 0x0e00); + uec_phy_write(mii_info, 0x04, 0x01e1); + uec_phy_write(mii_info, 0x00, 0x9140); + uec_phy_write(mii_info, 0x00, 0x1000); udelay (100000); - phy_write (mii_info, 0x00, 0x2900); - phy_write (mii_info, 0x14, 0x0cd2); - phy_write (mii_info, 0x00, 0xa100); - phy_write (mii_info, 0x09, 0x0000); - phy_write (mii_info, 0x1b, 0x800b); - phy_write (mii_info, 0x04, 0x05e1); - phy_write (mii_info, 0x00, 0xa100); - phy_write (mii_info, 0x00, 0x2100); + uec_phy_write(mii_info, 0x00, 0x2900); + uec_phy_write(mii_info, 0x14, 0x0cd2); + uec_phy_write(mii_info, 0x00, 0xa100); + uec_phy_write(mii_info, 0x09, 0x0000); + uec_phy_write(mii_info, 0x1b, 0x800b); + uec_phy_write(mii_info, 0x04, 0x05e1); + uec_phy_write(mii_info, 0x00, 0xa100); + uec_phy_write(mii_info, 0x00, 0x2100); udelay (1000000); - } else if (speed == 10) { - phy_write (mii_info, 0x14, 0x8e40); - phy_write (mii_info, 0x1b, 0x800b); - phy_write (mii_info, 0x14, 0x0c82); - phy_write (mii_info, 0x00, 0x8100); + } else if (speed == SPEED_10) { + uec_phy_write(mii_info, 0x14, 0x8e40); + uec_phy_write(mii_info, 0x1b, 0x800b); + uec_phy_write(mii_info, 0x14, 0x0c82); + uec_phy_write(mii_info, 0x00, 0x8100); udelay (1000000); } } /* handle 88e1111 rev.B2 erratum 5.6 */ if (mii_info->autoneg) { - status = phy_read (mii_info, MII_BMCR); - phy_write (mii_info, MII_BMCR, status | BMCR_ANENABLE); + status = uec_phy_read(mii_info, MII_BMCR); + uec_phy_write(mii_info, MII_BMCR, status | BMCR_ANENABLE); } /* now the B2 will correctly report autoneg completion status */ } void change_phy_interface_mode (struct eth_device *dev, - enum fsl_phy_enet_if type, int speed) + phy_interface_t type, int speed) { #ifdef CONFIG_PHY_MODE_NEED_CHANGE marvell_phy_interface_mode (dev, type, speed); diff --git a/drivers/rtc/rv3029.c b/drivers/rtc/rv3029.c index 3ebc768..e012168 100644 --- a/drivers/rtc/rv3029.c +++ b/drivers/rtc/rv3029.c @@ -25,6 +25,12 @@ #include <i2c.h> #include <rtc.h> +#define RTC_RV3029_CTRL1 0x00 +#define RTC_RV3029_CTRL1_EERE (1 << 3) + +#define RTC_RV3029_CTRL_STATUS 0x03 +#define RTC_RV3029_CTRLS_EEBUSY (1 << 7) + #define RTC_RV3029_CTRL_RESET 0x04 #define RTC_RV3029_CTRL_SYS_R (1 << 4) @@ -42,6 +48,12 @@ #define RV3029C2_REG_HR_12_24 (1 << 6) /* 24h/12h mode */ #define RV3029C2_REG_HR_PM (1 << 5) /* PM/AM bit in 12h mode */ +#define RTC_RV3029_EEPROM_CTRL 0x30 +#define RTC_RV3029_TRICKLE_1K (1 << 4) +#define RTC_RV3029_TRICKLE_5K (1 << 5) +#define RTC_RV3029_TRICKLE_20K (1 << 6) +#define RTC_RV3029_TRICKLE_80K (1 << 7) + int rtc_get( struct rtc_time *tmp ) { int ret; @@ -113,6 +125,41 @@ int rtc_set( struct rtc_time *tmp ) return 0; } +/* sets EERE-Bit (automatic EEPROM refresh) */ +static void set_eere_bit(int state) +{ + int ret; + unsigned char reg_ctrl1; + + ret = i2c_read(CONFIG_SYS_I2C_RTC_ADDR, RTC_RV3029_CTRL1, 1, + ®_ctrl1, 1); + + if (state) + reg_ctrl1 |= RTC_RV3029_CTRL1_EERE; + else + reg_ctrl1 &= (~RTC_RV3029_CTRL1_EERE); + + ret = i2c_write(CONFIG_SYS_I2C_RTC_ADDR, RTC_RV3029_CTRL1, 1, + ®_ctrl1, 1); +} + +/* waits until EEPROM page is no longer busy (times out after 10ms*loops) */ +static int wait_eebusy(int loops) +{ + int i, ret; + unsigned char ctrl_status; + + for (i = 0; i < loops; i++) { + ret = i2c_read(CONFIG_SYS_I2C_RTC_ADDR, RTC_RV3029_CTRL_STATUS, + 1, &ctrl_status, 1); + + if ((ctrl_status & RTC_RV3029_CTRLS_EEBUSY) == 0) + break; + udelay(10000); + } + return i; +} + void rtc_reset (void) { int ret; @@ -121,4 +168,44 @@ void rtc_reset (void) buf[0] = RTC_RV3029_CTRL_SYS_R; ret = i2c_write(CONFIG_SYS_I2C_RTC_ADDR, RTC_RV3029_CTRL_RESET, 1, buf, 1); + +#if defined(CONFIG_SYS_RV3029_TCR) + /* + * because EEPROM_CTRL register is in EEPROM page it is necessary to + * disable automatic EEPROM refresh and check if EEPROM is busy + * before EEPORM_CTRL register may be accessed + */ + set_eere_bit(0); + wait_eebusy(100); + /* read current trickle charger setting */ + ret = i2c_read(CONFIG_SYS_I2C_RTC_ADDR, RTC_RV3029_EEPROM_CTRL, + 1, buf, 1); + /* enable automatic EEPROM refresh again */ + set_eere_bit(1); + + /* + * to minimize EEPROM access write trickle charger setting only if it + * differs from current value + */ + if ((buf[0] & 0xF0) != CONFIG_SYS_RV3029_TCR) { + buf[0] = (buf[0] & 0x0F) | CONFIG_SYS_RV3029_TCR; + /* + * write trickle charger setting (disable autom. EEPROM + * refresh and wait until EEPROM is idle) + */ + set_eere_bit(0); + wait_eebusy(100); + ret = i2c_write(CONFIG_SYS_I2C_RTC_ADDR, + RTC_RV3029_EEPROM_CTRL, 1, buf, 1); + /* + * it is necessary to wait 10ms before EEBUSY-Bit may be read + * (this is not documented in the data sheet yet, but the + * manufacturer recommends it) + */ + udelay(10000); + /* wait until EEPROM write access is finished */ + wait_eebusy(100); + set_eere_bit(1); + } +#endif } diff --git a/drivers/serial/serial_mxc.c b/drivers/serial/serial_mxc.c index b9cf9de..dcb4bd1 100644 --- a/drivers/serial/serial_mxc.c +++ b/drivers/serial/serial_mxc.c @@ -19,12 +19,8 @@ #include <common.h> #include <watchdog.h> -#ifdef CONFIG_MX31 -#include <asm/arch/mx31.h> -#else #include <asm/arch/imx-regs.h> #include <asm/arch/clock.h> -#endif #define __REG(x) (*((volatile u32 *)(x))) diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index d582fbb..a9b1ca4 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -35,9 +35,11 @@ COBJS-$(CONFIG_KIRKWOOD_SPI) += kirkwood_spi.o COBJS-$(CONFIG_MPC52XX_SPI) += mpc52xx_spi.o COBJS-$(CONFIG_MPC8XXX_SPI) += mpc8xxx_spi.o COBJS-$(CONFIG_MXC_SPI) += mxc_spi.o +COBJS-$(CONFIG_OC_TINY_SPI) += oc_tiny_spi.o COBJS-$(CONFIG_OMAP3_SPI) += omap3_spi.o COBJS-$(CONFIG_SOFT_SPI) += soft_spi.o COBJS-$(CONFIG_SH_SPI) += sh_spi.o +COBJS-$(CONFIG_FSL_ESPI) += fsl_espi.o COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) diff --git a/drivers/spi/bfin_spi.c b/drivers/spi/bfin_spi.c index d7e1474..213e792 100644 --- a/drivers/spi/bfin_spi.c +++ b/drivers/spi/bfin_spi.c @@ -138,13 +138,29 @@ static const unsigned short cs_pins[][7] = { #endif }; +void spi_set_speed(struct spi_slave *slave, uint hz) +{ + struct bfin_spi_slave *bss = to_bfin_spi_slave(slave); + ulong sclk; + u32 baud; + + sclk = get_sclk(); + baud = sclk / (2 * hz); + /* baud should be rounded up */ + if (sclk % (2 * hz)) + baud += 1; + if (baud < 2) + baud = 2; + else if (baud > (u16)-1) + baud = -1; + bss->baud = baud; +} + struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, unsigned int max_hz, unsigned int mode) { struct bfin_spi_slave *bss; - ulong sclk; u32 mmr_base; - u32 baud; if (!spi_cs_is_valid(bus, cs)) return NULL; @@ -166,16 +182,6 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, default: return NULL; } - sclk = get_sclk(); - baud = sclk / (2 * max_hz); - /* baud should be rounded up */ - if (sclk % (2 * max_hz)) - baud += 1; - if (baud < 2) - baud = 2; - else if (baud > (u16)-1) - baud = -1; - bss = malloc(sizeof(*bss)); if (!bss) return NULL; @@ -187,8 +193,8 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, if (mode & SPI_CPHA) bss->ctl |= CPHA; if (mode & SPI_CPOL) bss->ctl |= CPOL; if (mode & SPI_LSB_FIRST) bss->ctl |= LSBF; - bss->baud = baud; bss->flg = mode & SPI_CS_HIGH ? 1 : 0; + spi_set_speed(&bss->slave, max_hz); debug("%s: bus:%i cs:%i mmr:%x ctl:%x baud:%i flg:%i\n", __func__, bus, cs, mmr_base, bss->ctl, baud, bss->flg); @@ -248,6 +254,8 @@ void spi_release_bus(struct spi_slave *slave) #elif defined(__ADSPBF537__) || defined(__ADSPBF536__) || defined(__ADSPBF534__) || \ defined(__ADSPBF52x__) || defined(__ADSPBF51x__) # define SPI_DMA_BASE DMA7_NEXT_DESC_PTR +# elif defined(__ADSPBF50x__) +# define SPI_DMA_BASE DMA6_NEXT_DESC_PTR #else # error "Please provide SPI DMA channel defines" #endif diff --git a/drivers/spi/cf_spi.c b/drivers/spi/cf_spi.c index 722aafc..a883da9 100644 --- a/drivers/spi/cf_spi.c +++ b/drivers/spi/cf_spi.c @@ -49,6 +49,14 @@ extern void cfspi_release_bus(uint bus, uint cs); DECLARE_GLOBAL_DATA_PTR; +#ifndef CONFIG_SPI_IDLE_VAL +#if defined(CONFIG_SPI_MMC) +#define CONFIG_SPI_IDLE_VAL 0xFFFF +#else +#define CONFIG_SPI_IDLE_VAL 0x0 +#endif +#endif + #if defined(CONFIG_CF_DSPI) /* DSPI specific mode */ #define SPI_MODE_MOD 0x00200000 @@ -145,7 +153,7 @@ int cfspi_xfer(struct spi_slave *slave, uint bitlen, const void *dout, } if (din != NULL) { - cfspi_tx(ctrl, 0); + cfspi_tx(ctrl, CONFIG_SPI_IDLE_VAL); if (cfslave->charbit == 16) *spi_rd16++ = cfspi_rx(); else @@ -169,7 +177,7 @@ int cfspi_xfer(struct spi_slave *slave, uint bitlen, const void *dout, } if (din != NULL) { - cfspi_tx(ctrl, 0); + cfspi_tx(ctrl, CONFIG_SPI_IDLE_VAL); if (cfslave->charbit == 16) *spi_rd16 = cfspi_rx(); else @@ -177,7 +185,7 @@ int cfspi_xfer(struct spi_slave *slave, uint bitlen, const void *dout, } } else { /* dummy read */ - cfspi_tx(ctrl, 0); + cfspi_tx(ctrl, CONFIG_SPI_IDLE_VAL); cfspi_rx(); } diff --git a/drivers/spi/fsl_espi.c b/drivers/spi/fsl_espi.c new file mode 100644 index 0000000..f872cd8 --- /dev/null +++ b/drivers/spi/fsl_espi.c @@ -0,0 +1,334 @@ +/* + * eSPI controller driver. + * + * Copyright 2010-2011 Freescale Semiconductor, Inc. + * Author: Mingkai Hu (Mingkai.hu@freescale.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> + +#include <malloc.h> +#include <spi.h> +#include <asm/immap_85xx.h> + +struct fsl_spi_slave { + struct spi_slave slave; + unsigned int div16; + unsigned int pm; + unsigned int mode; + size_t cmd_len; + u8 cmd_buf[16]; + size_t data_len; + unsigned int max_transfer_length; +}; + +#define to_fsl_spi_slave(s) container_of(s, struct fsl_spi_slave, slave) + +#define ESPI_MAX_CS_NUM 4 + +#define ESPI_EV_RNE (1 << 9) +#define ESPI_EV_TNF (1 << 8) + +#define ESPI_MODE_EN (1 << 31) /* Enable interface */ +#define ESPI_MODE_TXTHR(x) ((x) << 8) /* Tx FIFO threshold */ +#define ESPI_MODE_RXTHR(x) ((x) << 0) /* Rx FIFO threshold */ + +#define ESPI_COM_CS(x) ((x) << 30) +#define ESPI_COM_TRANLEN(x) ((x) << 0) + +#define ESPI_CSMODE_CI_INACTIVEHIGH (1 << 31) +#define ESPI_CSMODE_CP_BEGIN_EDGCLK (1 << 30) +#define ESPI_CSMODE_REV_MSB_FIRST (1 << 29) +#define ESPI_CSMODE_DIV16 (1 << 28) +#define ESPI_CSMODE_PM(x) ((x) << 24) +#define ESPI_CSMODE_POL_ASSERTED_LOW (1 << 20) +#define ESPI_CSMODE_LEN(x) ((x) << 16) +#define ESPI_CSMODE_CSBEF(x) ((x) << 12) +#define ESPI_CSMODE_CSAFT(x) ((x) << 8) +#define ESPI_CSMODE_CSCG(x) ((x) << 3) + +#define ESPI_CSMODE_INIT_VAL (ESPI_CSMODE_POL_ASSERTED_LOW | \ + ESPI_CSMODE_CSBEF(0) | ESPI_CSMODE_CSAFT(0) | \ + ESPI_CSMODE_CSCG(1)) + +#define ESPI_MAX_DATA_TRANSFER_LEN 0xFFF0 + +struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, + unsigned int max_hz, unsigned int mode) +{ + struct fsl_spi_slave *fsl; + sys_info_t sysinfo; + unsigned long spibrg = 0; + unsigned char pm = 0; + + if (!spi_cs_is_valid(bus, cs)) + return NULL; + + fsl = malloc(sizeof(struct fsl_spi_slave)); + if (!fsl) + return NULL; + + fsl->slave.bus = bus; + fsl->slave.cs = cs; + fsl->mode = mode; + fsl->max_transfer_length = ESPI_MAX_DATA_TRANSFER_LEN; + + /* Set eSPI BRG clock source */ + get_sys_info(&sysinfo); + spibrg = sysinfo.freqSystemBus / 2; + fsl->div16 = 0; + if ((spibrg / max_hz) > 32) { + fsl->div16 = ESPI_CSMODE_DIV16; + pm = spibrg / (max_hz * 16 * 2); + if (pm > 16) { + pm = 16; + debug("Requested speed is too low: %d Hz, " + "%d Hz is used.\n", max_hz, spibrg / (32 * 16)); + } + } else + pm = spibrg / (max_hz * 2); + if (pm) + pm--; + fsl->pm = pm; + + return &fsl->slave; +} + +void spi_free_slave(struct spi_slave *slave) +{ + struct fsl_spi_slave *fsl = to_fsl_spi_slave(slave); + free(fsl); +} + +void spi_init(void) +{ + +} + +int spi_claim_bus(struct spi_slave *slave) +{ + struct fsl_spi_slave *fsl = to_fsl_spi_slave(slave); + ccsr_espi_t *espi = (void *)(CONFIG_SYS_MPC85xx_ESPI_ADDR); + unsigned char pm = fsl->pm; + unsigned int cs = slave->cs; + unsigned int mode = fsl->mode; + unsigned int div16 = fsl->div16; + int i; + + debug("%s: bus:%i cs:%i\n", __func__, slave->bus, cs); + + /* Enable eSPI interface */ + out_be32(&espi->mode, ESPI_MODE_RXTHR(3) + | ESPI_MODE_TXTHR(4) | ESPI_MODE_EN); + + out_be32(&espi->event, 0xffffffff); /* Clear all eSPI events */ + out_be32(&espi->mask, 0x00000000); /* Mask all eSPI interrupts */ + + /* Init CS mode interface */ + for (i = 0; i < ESPI_MAX_CS_NUM; i++) + out_be32(&espi->csmode[i], ESPI_CSMODE_INIT_VAL); + + out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) & + ~(ESPI_CSMODE_PM(0xF) | ESPI_CSMODE_DIV16 + | ESPI_CSMODE_CI_INACTIVEHIGH | ESPI_CSMODE_CP_BEGIN_EDGCLK + | ESPI_CSMODE_REV_MSB_FIRST | ESPI_CSMODE_LEN(0xF))); + + /* Set eSPI BRG clock source */ + out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) + | ESPI_CSMODE_PM(pm) | div16); + + /* Set eSPI mode */ + if (mode & SPI_CPHA) + out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) + | ESPI_CSMODE_CP_BEGIN_EDGCLK); + if (mode & SPI_CPOL) + out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) + | ESPI_CSMODE_CI_INACTIVEHIGH); + + /* Character bit order: msb first */ + out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) + | ESPI_CSMODE_REV_MSB_FIRST); + + /* Character length in bits, between 0x3~0xf, i.e. 4bits~16bits */ + out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs]) + | ESPI_CSMODE_LEN(7)); + + return 0; +} + +void spi_release_bus(struct spi_slave *slave) +{ + +} + +int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *data_out, + void *data_in, unsigned long flags) +{ + struct fsl_spi_slave *fsl = to_fsl_spi_slave(slave); + ccsr_espi_t *espi = (void *)(CONFIG_SYS_MPC85xx_ESPI_ADDR); + unsigned int tmpdout, tmpdin, event; + const void *dout = NULL; + void *din = NULL; + int len = 0; + int num_blks, num_chunks, max_tran_len, tran_len; + int num_bytes; + unsigned char *ch; + unsigned char *buffer = NULL; + size_t buf_len; + u8 *cmd_buf = fsl->cmd_buf; + size_t cmd_len = fsl->cmd_len; + size_t data_len = bitlen / 8; + size_t rx_offset = 0; + + max_tran_len = fsl->max_transfer_length; + switch (flags) { + case SPI_XFER_BEGIN: + cmd_len = fsl->cmd_len = data_len; + memcpy(cmd_buf, data_out, cmd_len); + return 0; + case 0: + case SPI_XFER_END: + if (bitlen == 0) { + spi_cs_deactivate(slave); + return 0; + } + buf_len = 2 * cmd_len + min(data_len, max_tran_len); + len = cmd_len + data_len; + rx_offset = cmd_len; + buffer = (unsigned char *)malloc(buf_len); + if (!buffer) { + debug("SF: Failed to malloc memory.\n"); + return 1; + } + memcpy(buffer, cmd_buf, cmd_len); + if (cmd_len != 1) { + if (data_in == NULL) + memcpy(buffer + cmd_len, data_out, data_len); + } + break; + case SPI_XFER_BEGIN | SPI_XFER_END: + len = data_len; + buffer = (unsigned char *)malloc(len * 2); + if (!buffer) { + debug("SF: Failed to malloc memory.\n"); + return 1; + } + memcpy(buffer, data_out, len); + rx_offset = len; + cmd_len = 0; + break; + } + + debug("spi_xfer: slave %u:%u dout %08X(%08x) din %08X(%08x) len %u\n", + slave->bus, slave->cs, *(uint *) dout, + dout, *(uint *) din, din, len); + + num_chunks = data_len / max_tran_len + + (data_len % max_tran_len ? 1 : 0); + while (num_chunks--) { + if (data_in) + din = buffer + rx_offset; + dout = buffer; + tran_len = min(data_len , max_tran_len); + num_blks = (tran_len + cmd_len) / 4 + + ((tran_len + cmd_len) % 4 ? 1 : 0); + num_bytes = (tran_len + cmd_len) % 4; + fsl->data_len = tran_len + cmd_len; + spi_cs_activate(slave); + + /* Clear all eSPI events */ + out_be32(&espi->event , 0xffffffff); + /* handle data in 32-bit chunks */ + while (num_blks--) { + + event = in_be32(&espi->event); + if (event & ESPI_EV_TNF) { + tmpdout = *(u32 *)dout; + + /* Set up the next iteration */ + if (len > 4) { + len -= 4; + dout += 4; + } + + out_be32(&espi->tx, tmpdout); + out_be32(&espi->event, ESPI_EV_TNF); + debug("***spi_xfer:...%08x written\n", tmpdout); + } + + /* Wait for eSPI transmit to get out */ + udelay(80); + + event = in_be32(&espi->event); + if (event & ESPI_EV_RNE) { + tmpdin = in_be32(&espi->rx); + if (num_blks == 0 && num_bytes != 0) { + ch = (unsigned char *)&tmpdin; + while (num_bytes--) + *(unsigned char *)din++ = *ch++; + } else { + *(u32 *) din = tmpdin; + din += 4; + } + + out_be32(&espi->event, in_be32(&espi->event) + | ESPI_EV_RNE); + debug("***spi_xfer:...%08x readed\n", tmpdin); + } + } + if (data_in) { + memcpy(data_in, buffer + 2 * cmd_len, tran_len); + if (*buffer == 0x0b) { + data_in += tran_len; + data_len -= tran_len; + *(int *)buffer += tran_len; + } + } + spi_cs_deactivate(slave); + } + + free(buffer); + return 0; +} + +int spi_cs_is_valid(unsigned int bus, unsigned int cs) +{ + return bus == 0 && cs < ESPI_MAX_CS_NUM; +} + +void spi_cs_activate(struct spi_slave *slave) +{ + struct fsl_spi_slave *fsl = to_fsl_spi_slave(slave); + ccsr_espi_t *espi = (void *)(CONFIG_SYS_MPC85xx_ESPI_ADDR); + unsigned int com = 0; + size_t data_len = fsl->data_len; + + com &= ~(ESPI_COM_CS(0x3) | ESPI_COM_TRANLEN(0xFFFF)); + com |= ESPI_COM_CS(slave->cs); + com |= ESPI_COM_TRANLEN(data_len - 1); + out_be32(&espi->com, com); +} + +void spi_cs_deactivate(struct spi_slave *slave) +{ + ccsr_espi_t *espi = (void *)(CONFIG_SYS_MPC85xx_ESPI_ADDR); + + /* clear the RXCNT and TXCNT */ + out_be32(&espi->mode, in_be32(&espi->mode) & (~ESPI_MODE_EN)); + out_be32(&espi->mode, in_be32(&espi->mode) | ESPI_MODE_EN); +} diff --git a/drivers/spi/mxc_spi.c b/drivers/spi/mxc_spi.c index 6474eb8..f909e07 100644 --- a/drivers/spi/mxc_spi.c +++ b/drivers/spi/mxc_spi.c @@ -24,6 +24,8 @@ #include <asm/errno.h> #include <asm/io.h> #include <mxc_gpio.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/clock.h> #ifdef CONFIG_MX27 /* i.MX27 has a completely wrong register layout and register definitions in the @@ -34,8 +36,6 @@ #elif defined(CONFIG_MX31) -#include <asm/arch/mx31.h> - #define MXC_CSPICTRL_EN (1 << 0) #define MXC_CSPICTRL_MODE (1 << 1) #define MXC_CSPICTRL_XCH (1 << 2) @@ -63,8 +63,6 @@ static unsigned long spi_bases[] = { #define mxc_get_clock(x) mx31_get_ipg_clk() #elif defined(CONFIG_MX51) -#include <asm/arch/imx-regs.h> -#include <asm/arch/clock.h> #define MXC_CSPICTRL_EN (1 << 0) #define MXC_CSPICTRL_MODE (1 << 1) @@ -97,9 +95,6 @@ static unsigned long spi_bases[] = { #elif defined(CONFIG_MX35) -#include <asm/arch/imx-regs.h> -#include <asm/arch/clock.h> - #define MXC_CSPICTRL_EN (1 << 0) #define MXC_CSPICTRL_MODE (1 << 1) #define MXC_CSPICTRL_XCH (1 << 2) diff --git a/drivers/spi/oc_tiny_spi.c b/drivers/spi/oc_tiny_spi.c new file mode 100644 index 0000000..fc01fb8 --- /dev/null +++ b/drivers/spi/oc_tiny_spi.c @@ -0,0 +1,248 @@ +/* + * Opencore tiny_spi driver + * + * http://opencores.org/project,tiny_spi + * + * based on bfin_spi.c + * Copyright (c) 2005-2008 Analog Devices Inc. + * Copyright (C) 2010 Thomas Chou <thomas@wytron.com.tw> + * + * Licensed under the GPL-2 or later. + */ + +#include <common.h> +#include <asm/io.h> +#include <malloc.h> +#include <spi.h> +#include <asm/gpio.h> + +#define TINY_SPI_STATUS_TXE 0x1 +#define TINY_SPI_STATUS_TXR 0x2 + +struct tiny_spi_regs { + unsigned rxdata; /* Rx data reg */ + unsigned txdata; /* Tx data reg */ + unsigned status; /* Status reg */ + unsigned control; /* Control reg */ + unsigned baud; /* Baud reg */ +}; + +struct tiny_spi_host { + uint base; + uint freq; + uint baudwidth; +}; +static const struct tiny_spi_host tiny_spi_host_list[] = + CONFIG_SYS_TINY_SPI_LIST; + +struct tiny_spi_slave { + struct spi_slave slave; + const struct tiny_spi_host *host; + uint mode; + uint baud; + uint flg; +}; +#define to_tiny_spi_slave(s) container_of(s, struct tiny_spi_slave, slave) + +int spi_cs_is_valid(unsigned int bus, unsigned int cs) +{ + return bus < ARRAY_SIZE(tiny_spi_host_list) && gpio_is_valid(cs); +} + +void spi_cs_activate(struct spi_slave *slave) +{ + struct tiny_spi_slave *tiny_spi = to_tiny_spi_slave(slave); + unsigned int cs = slave->cs; + + gpio_set_value(cs, tiny_spi->flg); + debug("%s: SPI_CS_GPIO:%x\n", __func__, gpio_get_value(cs)); +} + +void spi_cs_deactivate(struct spi_slave *slave) +{ + struct tiny_spi_slave *tiny_spi = to_tiny_spi_slave(slave); + unsigned int cs = slave->cs; + + gpio_set_value(cs, !tiny_spi->flg); + debug("%s: SPI_CS_GPIO:%x\n", __func__, gpio_get_value(cs)); +} + +void spi_set_speed(struct spi_slave *slave, uint hz) +{ + struct tiny_spi_slave *tiny_spi = to_tiny_spi_slave(slave); + const struct tiny_spi_host *host = tiny_spi->host; + + tiny_spi->baud = min(DIV_ROUND_UP(host->freq, hz * 2), + (1 << host->baudwidth)) - 1; + debug("%s: speed %u actual %u\n", __func__, hz, + host->freq / ((tiny_spi->baud + 1) * 2)); +} + +void spi_init(void) +{ +} + +struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, + unsigned int hz, unsigned int mode) +{ + struct tiny_spi_slave *tiny_spi; + + if (!spi_cs_is_valid(bus, cs) || gpio_request(cs, "tiny_spi")) + return NULL; + + tiny_spi = malloc(sizeof(*tiny_spi)); + if (!tiny_spi) + return NULL; + memset(tiny_spi, 0, sizeof(*tiny_spi)); + + tiny_spi->slave.bus = bus; + tiny_spi->slave.cs = cs; + tiny_spi->host = &tiny_spi_host_list[bus]; + tiny_spi->mode = mode & (SPI_CPOL | SPI_CPHA); + tiny_spi->flg = mode & SPI_CS_HIGH ? 1 : 0; + spi_set_speed(&tiny_spi->slave, hz); + + debug("%s: bus:%i cs:%i base:%lx\n", __func__, + bus, cs, tiny_spi->host->base); + return &tiny_spi->slave; +} + +void spi_free_slave(struct spi_slave *slave) +{ + struct tiny_spi_slave *tiny_spi = to_tiny_spi_slave(slave); + + gpio_free(slave->cs); + free(tiny_spi); +} + +int spi_claim_bus(struct spi_slave *slave) +{ + struct tiny_spi_slave *tiny_spi = to_tiny_spi_slave(slave); + struct tiny_spi_regs *regs = (void *)tiny_spi->host->base; + + debug("%s: bus:%i cs:%i\n", __func__, slave->bus, slave->cs); + gpio_direction_output(slave->cs, !tiny_spi->flg); + writel(tiny_spi->mode, ®s->control); + writel(tiny_spi->baud, ®s->baud); + return 0; +} + +void spi_release_bus(struct spi_slave *slave) +{ + debug("%s: bus:%i cs:%i\n", __func__, slave->bus, slave->cs); +} + +#ifndef CONFIG_TINY_SPI_IDLE_VAL +# define CONFIG_TINY_SPI_IDLE_VAL 0xff +#endif + +int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, + void *din, unsigned long flags) +{ + struct tiny_spi_slave *tiny_spi = to_tiny_spi_slave(slave); + struct tiny_spi_regs *regs = (void *)tiny_spi->host->base; + const u8 *txp = dout; + u8 *rxp = din; + uint bytes = bitlen / 8; + uint i; + + debug("%s: bus:%i cs:%i bitlen:%i bytes:%i flags:%lx\n", __func__, + slave->bus, slave->cs, bitlen, bytes, flags); + if (bitlen == 0) + goto done; + + /* assume to do 8 bits transfers */ + if (bitlen % 8) { + flags |= SPI_XFER_END; + goto done; + } + + if (flags & SPI_XFER_BEGIN) + spi_cs_activate(slave); + + /* we need to tighten the transfer loop */ + if (txp && rxp) { + writeb(*txp++, ®s->txdata); + if (bytes > 1) { + writeb(*txp++, ®s->txdata); + for (i = 2; i < bytes; i++) { + u8 rx, tx = *txp++; + while (!(readb(®s->status) & + TINY_SPI_STATUS_TXR)) + ; + rx = readb(®s->txdata); + writeb(tx, ®s->txdata); + *rxp++ = rx; + } + while (!(readb(®s->status) & + TINY_SPI_STATUS_TXR)) + ; + *rxp++ = readb(®s->txdata); + } + while (!(readb(®s->status) & + TINY_SPI_STATUS_TXE)) + ; + *rxp++ = readb(®s->rxdata); + } else if (rxp) { + writeb(CONFIG_TINY_SPI_IDLE_VAL, ®s->txdata); + if (bytes > 1) { + writeb(CONFIG_TINY_SPI_IDLE_VAL, + ®s->txdata); + for (i = 2; i < bytes; i++) { + u8 rx; + while (!(readb(®s->status) & + TINY_SPI_STATUS_TXR)) + ; + rx = readb(®s->txdata); + writeb(CONFIG_TINY_SPI_IDLE_VAL, + ®s->txdata); + *rxp++ = rx; + } + while (!(readb(®s->status) & + TINY_SPI_STATUS_TXR)) + ; + *rxp++ = readb(®s->txdata); + } + while (!(readb(®s->status) & + TINY_SPI_STATUS_TXE)) + ; + *rxp++ = readb(®s->rxdata); + } else if (txp) { + writeb(*txp++, ®s->txdata); + if (bytes > 1) { + writeb(*txp++, ®s->txdata); + for (i = 2; i < bytes; i++) { + u8 tx = *txp++; + while (!(readb(®s->status) & + TINY_SPI_STATUS_TXR)) + ; + writeb(tx, ®s->txdata); + } + } + while (!(readb(®s->status) & + TINY_SPI_STATUS_TXE)) + ; + } else { + writeb(CONFIG_TINY_SPI_IDLE_VAL, ®s->txdata); + if (bytes > 1) { + writeb(CONFIG_TINY_SPI_IDLE_VAL, + ®s->txdata); + for (i = 2; i < bytes; i++) { + while (!(readb(®s->status) & + TINY_SPI_STATUS_TXR)) + ; + writeb(CONFIG_TINY_SPI_IDLE_VAL, + ®s->txdata); + } + } + while (!(readb(®s->status) & + TINY_SPI_STATUS_TXE)) + ; + } + + done: + if (flags & SPI_XFER_END) + spi_cs_deactivate(slave); + + return 0; +} diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c index 8d7b380..6af35ab 100644 --- a/drivers/usb/host/ehci-mxc.c +++ b/drivers/usb/host/ehci-mxc.c @@ -20,7 +20,7 @@ #include <common.h> #include <usb.h> #include <asm/io.h> -#include <asm/arch/mx31-regs.h> +#include <asm/arch/imx-regs.h> #include <usb/ehci-fsl.h> #include <errno.h> diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index cff3438..4abe5e3 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -28,7 +28,9 @@ #ifdef CONFIG_PCI_EHCI_DEVICE static struct pci_device_id ehci_pci_ids[] = { /* Please add supported PCI EHCI controller ids here */ - {0x1033, 0x00E0}, + {0x1033, 0x00E0}, /* NEC */ + {0x10B9, 0x5239}, /* ULI1575 PCI EHCI module ids */ + {0x12D8, 0x400F}, /* Pericom */ {0, 0} }; #endif diff --git a/drivers/usb/musb/blackfin_usb.c b/drivers/usb/musb/blackfin_usb.c index 38aceb2..35268ba 100644 --- a/drivers/usb/musb/blackfin_usb.c +++ b/drivers/usb/musb/blackfin_usb.c @@ -15,6 +15,10 @@ #include "musb_core.h" +#ifndef CONFIG_USB_BLACKFIN_CLKIN +#define CONFIG_USB_BLACKFIN_CLKIN 24 +#endif + /* MUSB platform configuration */ struct musb_config musb_cfg = { .regs = (struct musb_regs *)USB_FADDR, @@ -93,10 +97,25 @@ static void __def_musb_init(void) } void board_musb_init(void) __attribute__((weak, alias("__def_musb_init"))); -int musb_platform_init(void) +static void bfin_anomaly_init(void) { - /* board specific initialization */ - board_musb_init(); + u32 revid; + + if (!ANOMALY_05000346 && !ANOMALY_05000347) + return; + + revid = bfin_revid(); + +#ifdef __ADSPBF54x__ + if (revid > 0) + return; +#endif +#ifdef __ADSPBF52x__ + if (ANOMALY_BF526 && revid > 0) + return; + if (ANOMALY_BF527 && revid > 1) + return; +#endif if (ANOMALY_05000346) { bfin_write_USB_APHY_CALIB(ANOMALY_05000346_value); @@ -107,9 +126,18 @@ int musb_platform_init(void) bfin_write_USB_APHY_CNTRL(0x0); SSYNC(); } +} + +int musb_platform_init(void) +{ + /* board specific initialization */ + board_musb_init(); + + bfin_anomaly_init(); /* Configure PLL oscillator register */ - bfin_write_USB_PLLOSC_CTRL(0x30a8); + bfin_write_USB_PLLOSC_CTRL(0x3080 | + ((480 / CONFIG_USB_BLACKFIN_CLKIN) << 1)); SSYNC(); bfin_write_USB_SRP_CLKDIV((get_sclk()/1000) / 32 - 1); diff --git a/drivers/video/Makefile b/drivers/video/Makefile index 2c53a6f..086dc05 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -28,7 +28,7 @@ LIB := $(obj)libvideo.o COBJS-$(CONFIG_ATI_RADEON_FB) += ati_radeon_fb.o videomodes.o COBJS-$(CONFIG_ATMEL_LCD) += atmel_lcdfb.o COBJS-$(CONFIG_CFB_CONSOLE) += cfb_console.o -COBJS-$(CONFIG_FSL_DIU_FB) += fsl_diu_fb.o +COBJS-$(CONFIG_FSL_DIU_FB) += fsl_diu_fb.o videomodes.o COBJS-$(CONFIG_S6E63D6) += s6e63d6.o COBJS-$(CONFIG_VIDEO_AMBA) += amba.o COBJS-$(CONFIG_VIDEO_CT69000) += ct69000.o videomodes.o diff --git a/drivers/video/cfb_console.c b/drivers/video/cfb_console.c index dd849c2..b427c84 100644 --- a/drivers/video/cfb_console.c +++ b/drivers/video/cfb_console.c @@ -882,6 +882,8 @@ static int display_rle8_bitmap (bmp_image_t *img, int xoff, int yoff, struct palette p[256]; bmp_color_table_entry_t cte; int green_shift, red_off; + int limit = VIDEO_COLS * VIDEO_ROWS; + int pixels = 0; x = 0; y = __le32_to_cpu(img->header.height) - 1; @@ -962,6 +964,10 @@ static int display_rle8_bitmap (bmp_image_t *img, int xoff, int yoff, /* unencoded run */ cnt = bm[1]; runlen = cnt; + pixels += cnt; + if (pixels > limit) + goto error; + bm += 2; if (y < height) { if (x >= width) { @@ -970,7 +976,6 @@ static int display_rle8_bitmap (bmp_image_t *img, int xoff, int yoff, } if (x + runlen > width) cnt = width - x; - draw_bitmap (&fbp, bm, p, cnt, 0); x += runlen; } @@ -982,9 +987,13 @@ next_run: break; default: /* encoded run */ + cnt = bm[0]; + runlen = cnt; + pixels += cnt; + if (pixels > limit) + goto error; + if (y < height) { /* only draw into visible area */ - cnt = bm[0]; - runlen = cnt; if (x >= width) { x += runlen; bm += 2; @@ -992,7 +1001,6 @@ next_run: } if (x + runlen > width) cnt = width - x; - draw_bitmap (&fbp, bm, p, cnt, 1); x += runlen; } @@ -1001,6 +1009,9 @@ next_run: } } return 0; +error: + printf("Error: Too much encoded pixel data, validate your bitmap\n"); + return -1; } #endif diff --git a/drivers/video/fsl_diu_fb.c b/drivers/video/fsl_diu_fb.c index 35ed938..0709849 100644 --- a/drivers/video/fsl_diu_fb.c +++ b/drivers/video/fsl_diu_fb.c @@ -1,6 +1,7 @@ /* - * Copyright 2007, 2010 Freescale Semiconductor, Inc. - * York Sun <yorksun@freescale.com> + * Copyright 2007, 2010-2011 Freescale Semiconductor, Inc. + * Authors: York Sun <yorksun@freescale.com> + * Timur Tabi <timur@freescale.com> * * FSL DIU Framebuffer driver * @@ -24,12 +25,42 @@ */ #include <common.h> -#include <i2c.h> #include <malloc.h> #include <asm/io.h> +#include "videomodes.h" +#include <video_fb.h> #include <fsl_diu_fb.h> +struct fb_var_screeninfo { + unsigned int xres; /* visible resolution */ + unsigned int yres; + + unsigned int bits_per_pixel; /* guess what */ + + /* Timing: All values in pixclocks, except pixclock (of course) */ + unsigned int pixclock; /* pixel clock in ps (pico seconds) */ + unsigned int left_margin; /* time from sync to picture */ + unsigned int right_margin; /* time from picture to sync */ + unsigned int upper_margin; /* time from sync to picture */ + unsigned int lower_margin; + unsigned int hsync_len; /* length of horizontal sync */ + unsigned int vsync_len; /* length of vertical sync */ + unsigned int sync; /* see FB_SYNC_* */ + unsigned int vmode; /* see FB_VMODE_* */ + unsigned int rotate; /* angle we rotate counter clockwise */ +}; + +struct fb_info { + struct fb_var_screeninfo var; /* Current var */ + unsigned int smem_len; /* Length of frame buffer mem */ + unsigned int type; /* see FB_TYPE_* */ + unsigned int line_length; /* length of a line in bytes */ + + void *screen_base; + unsigned long screen_size; +}; + struct fb_videomode { const char *name; /* optional */ unsigned int refresh; /* optional */ @@ -53,6 +84,7 @@ struct fb_videomode { /* This setting is used for the ifm pdm360ng with PRIMEVIEW PM070WL3 */ static struct fb_videomode fsl_diu_mode_800 = { + .name = "800x600-60", .refresh = 60, .xres = 800, .yres = 480, @@ -74,6 +106,7 @@ static struct fb_videomode fsl_diu_mode_800 = { * hsync 31.5kHz, vsync 60Hz */ static struct fb_videomode fsl_diu_mode_1024 = { + .name = "1024x768-60", .refresh = 60, .xres = 1024, .yres = 768, @@ -109,120 +142,137 @@ static struct fb_videomode fsl_diu_mode_1280 = { */ struct diu_ad { /* Word 0(32-bit) in DDR memory */ - unsigned int pix_fmt; /* hard coding pixel format */ + __le32 pix_fmt; /* hard coding pixel format */ /* Word 1(32-bit) in DDR memory */ - unsigned int addr; + __le32 addr; /* Word 2(32-bit) in DDR memory */ - unsigned int src_size_g_alpha; + __le32 src_size_g_alpha; /* Word 3(32-bit) in DDR memory */ - unsigned int aoi_size; + __le32 aoi_size; /* Word 4(32-bit) in DDR memory */ - unsigned int offset_xyi; + __le32 offset_xyi; /* Word 5(32-bit) in DDR memory */ - unsigned int offset_xyd; + __le32 offset_xyd; /* Word 6(32-bit) in DDR memory */ - unsigned int ckmax_r:8; - unsigned int ckmax_g:8; - unsigned int ckmax_b:8; - unsigned int res9:8; + __le32 ckmax_r:8; + __le32 ckmax_g:8; + __le32 ckmax_b:8; + __le32 res9:8; /* Word 7(32-bit) in DDR memory */ - unsigned int ckmin_r:8; - unsigned int ckmin_g:8; - unsigned int ckmin_b:8; - unsigned int res10:8; + __le32 ckmin_r:8; + __le32 ckmin_g:8; + __le32 ckmin_b:8; + __le32 res10:8; /* Word 8(32-bit) in DDR memory */ - unsigned int next_ad; + __le32 next_ad; /* Word 9(32-bit) in DDR memory, just for 64-bit aligned */ - unsigned int res1; - unsigned int res2; - unsigned int res3; -}__attribute__ ((packed)); + __le32 res[3]; +} __attribute__ ((packed)); /* * DIU register map */ struct diu { - unsigned int desc[3]; - unsigned int gamma; - unsigned int pallete; - unsigned int cursor; - unsigned int curs_pos; - unsigned int diu_mode; - unsigned int bgnd; - unsigned int bgnd_wb; - unsigned int disp_size; - unsigned int wb_size; - unsigned int wb_mem_addr; - unsigned int hsyn_para; - unsigned int vsyn_para; - unsigned int syn_pol; - unsigned int thresholds; - unsigned int int_status; - unsigned int int_mask; - unsigned int colorbar[8]; - unsigned int filling; - unsigned int plut; + __be32 desc[3]; + __be32 gamma; + __be32 pallete; + __be32 cursor; + __be32 curs_pos; + __be32 diu_mode; + __be32 bgnd; + __be32 bgnd_wb; + __be32 disp_size; + __be32 wb_size; + __be32 wb_mem_addr; + __be32 hsyn_para; + __be32 vsyn_para; + __be32 syn_pol; + __be32 thresholds; + __be32 int_status; + __be32 int_mask; + __be32 colorbar[8]; + __be32 filling; + __be32 plut; } __attribute__ ((packed)); -struct diu_hw { - struct diu *diu_reg; - volatile unsigned int mode; /* DIU operation mode */ -}; - struct diu_addr { - unsigned char * paddr; /* Virtual address */ - unsigned int offset; + void *vaddr; /* Virtual address */ + u32 paddr; /* 32-bit physical address */ + unsigned int offset; /* Alignment offset */ }; +static struct fb_info info; + /* - * Modes of operation of DIU + * Align to 64-bit(8-byte), 32-byte, etc. */ -#define MFB_MODE0 0 /* DIU off */ -#define MFB_MODE1 1 /* All three planes output to display */ -#define MFB_MODE2 2 /* Plane 1 to display, - * planes 2+3 written back to memory */ -#define MFB_MODE3 3 /* All three planes written back to memory */ -#define MFB_MODE4 4 /* Color bar generation */ - -#define MAX_CURS 32 - -static struct fb_info fsl_fb_info; -static struct diu_addr gamma, cursor; -static struct diu_ad fsl_diu_fb_ad __attribute__ ((aligned(32))); -static struct diu_ad dummy_ad __attribute__ ((aligned(32))); -static unsigned char *dummy_fb; -static struct diu_hw dr = { - .mode = MFB_MODE1, -}; +static int allocate_buf(struct diu_addr *buf, u32 size, u32 bytes_align) +{ + u32 offset, ssize; + u32 mask; -int fb_enabled = 0; -int fb_initialized = 0; -const int default_xres = 1280; -const int default_pixel_format = 0x88882317; + ssize = size + bytes_align; + buf->vaddr = malloc(ssize); + if (!buf->vaddr) + return -1; -static int map_video_memory(struct fb_info *info, unsigned long bytes_align); -static void enable_lcdc(void); -static void disable_lcdc(void); -static int fsl_diu_enable_panel(struct fb_info *info); -static int fsl_diu_disable_panel(struct fb_info *info); -static int allocate_buf(struct diu_addr *buf, u32 size, u32 bytes_align); -void diu_set_pixel_clock(unsigned int pixclock); + memset(buf->vaddr, 0, ssize); + mask = bytes_align - 1; + offset = (u32)buf->vaddr & mask; + if (offset) { + buf->offset = bytes_align - offset; + buf->vaddr += offset; + } else + buf->offset = 0; -int fsl_diu_init(int xres, unsigned int pixel_format, int gamma_fix) + buf->paddr = virt_to_phys(buf->vaddr); + return 0; +} + +/* + * Allocate a framebuffer and an Area Descriptor that points to it. Both + * are created in the same memory block. The Area Descriptor is updated to + * point to the framebuffer memory. Memory is aligned as needed. + */ +static struct diu_ad *allocate_fb(unsigned int xres, unsigned int yres, + unsigned int depth, void **fb) { - struct fb_videomode *fsl_diu_mode_db; - struct diu_ad *ad = &fsl_diu_fb_ad; - struct diu *hw; - struct fb_info *info = &fsl_fb_info; - struct fb_var_screeninfo *var = &info->var; - unsigned char *gamma_table_base; - unsigned int i, j; + unsigned long size = xres * yres * depth; + struct diu_addr addr; + struct diu_ad *ad; + size_t ad_size = roundup(sizeof(struct diu_ad), 32); + + /* + * Allocate a memory block that holds the Area Descriptor and the + * frame buffer right behind it. To keep the code simple, everything + * is aligned on a 32-byte address. + */ + if (allocate_buf(&addr, ad_size + size, 32) < 0) + return NULL; - debug("Enter fsl_diu_init\n"); - dr.diu_reg = (struct diu *) (CONFIG_SYS_DIU_ADDR); - hw = (struct diu *) dr.diu_reg; + ad = addr.vaddr; + ad->addr = cpu_to_le32(addr.paddr + ad_size); + ad->aoi_size = cpu_to_le32((yres << 16) | xres); + ad->src_size_g_alpha = cpu_to_le32((yres << 12) | xres); + ad->offset_xyi = 0; + ad->offset_xyd = 0; - disable_lcdc(); + if (fb) + *fb = addr.vaddr + ad_size; + + return ad; +} + +int fsl_diu_init(int xres, u32 pixel_format, int gamma_fix) +{ + struct fb_videomode *fsl_diu_mode_db; + struct diu_ad *ad; + struct diu *hw = (struct diu *)CONFIG_SYS_DIU_ADDR; + u8 *gamma_table_base; + unsigned int i, j; + struct diu_ad *dummy_ad; + struct diu_addr gamma; + struct diu_addr cursor; switch (xres) { case 800: @@ -235,65 +285,40 @@ int fsl_diu_init(int xres, unsigned int pixel_format, int gamma_fix) fsl_diu_mode_db = &fsl_diu_mode_1024; } - if (0 == fb_initialized) { - allocate_buf(&gamma, 768, 32); - debug("gamma is allocated @ 0x%x\n", - (unsigned int)gamma.paddr); - allocate_buf(&cursor, MAX_CURS * MAX_CURS * 2, 32); - debug("curosr is allocated @ 0x%x\n", - (unsigned int)cursor.paddr); - - /* create a dummy fb and dummy ad */ - dummy_fb = malloc(64); - if (NULL == dummy_fb) { - printf("Cannot allocate dummy fb\n"); - return -1; - } - dummy_ad.addr = cpu_to_le32((unsigned int)dummy_fb); - dummy_ad.pix_fmt = 0x88882317; - dummy_ad.src_size_g_alpha = 0x04400000; /* alpha = 0 */ - dummy_ad.aoi_size = 0x02000400; - dummy_ad.offset_xyi = 0; - dummy_ad.offset_xyd = 0; - dummy_ad.next_ad = 0; - /* Memory allocation for framebuffer */ - if (map_video_memory(info, 32)) { - printf("Unable to allocate fb memory 1\n"); - return -1; - } + /* The AD struct for the dummy framebuffer and the FB itself */ + dummy_ad = allocate_fb(2, 4, 4, NULL); + if (!dummy_ad) { + printf("DIU: Out of memory\n"); + return -1; } - - memset(info->screen_base, 0, info->smem_len); - - out_be32(&dr.diu_reg->desc[0], (int)&dummy_ad); - out_be32(&dr.diu_reg->desc[1], (int)&dummy_ad); - out_be32(&dr.diu_reg->desc[2], (int)&dummy_ad); - debug("dummy dr.diu_reg->desc[0] = 0x%x\n", dr.diu_reg->desc[0]); - debug("dummy desc[0] = 0x%x\n", hw->desc[0]); + dummy_ad->pix_fmt = 0x88883316; /* read mode info */ - var->xres = fsl_diu_mode_db->xres; - var->yres = fsl_diu_mode_db->yres; - var->bits_per_pixel = 32; - var->pixclock = fsl_diu_mode_db->pixclock; - var->left_margin = fsl_diu_mode_db->left_margin; - var->right_margin = fsl_diu_mode_db->right_margin; - var->upper_margin = fsl_diu_mode_db->upper_margin; - var->lower_margin = fsl_diu_mode_db->lower_margin; - var->hsync_len = fsl_diu_mode_db->hsync_len; - var->vsync_len = fsl_diu_mode_db->vsync_len; - var->sync = fsl_diu_mode_db->sync; - var->vmode = fsl_diu_mode_db->vmode; - info->line_length = var->xres * var->bits_per_pixel / 8; + info.var.xres = fsl_diu_mode_db->xres; + info.var.yres = fsl_diu_mode_db->yres; + info.var.bits_per_pixel = 32; + info.var.pixclock = fsl_diu_mode_db->pixclock; + info.var.left_margin = fsl_diu_mode_db->left_margin; + info.var.right_margin = fsl_diu_mode_db->right_margin; + info.var.upper_margin = fsl_diu_mode_db->upper_margin; + info.var.lower_margin = fsl_diu_mode_db->lower_margin; + info.var.hsync_len = fsl_diu_mode_db->hsync_len; + info.var.vsync_len = fsl_diu_mode_db->vsync_len; + info.var.sync = fsl_diu_mode_db->sync; + info.var.vmode = fsl_diu_mode_db->vmode; + info.line_length = info.var.xres * info.var.bits_per_pixel / 8; + + /* Memory allocation for framebuffer */ + info.smem_len = + info.var.xres * info.var.yres * (info.var.bits_per_pixel / 8); + ad = allocate_fb(info.var.xres, info.var.yres, + info.var.bits_per_pixel / 8, &info.screen_base); + if (!ad) { + printf("DIU: Out of memory\n"); + return -1; + } ad->pix_fmt = pixel_format; - ad->addr = cpu_to_le32((unsigned int)info->screen_base); - ad->src_size_g_alpha - = cpu_to_le32((var->yres << 12) | var->xres); - /* fix me. AOI should not be greater than display size */ - ad->aoi_size = cpu_to_le32(( var->yres << 16) | var->xres); - ad->offset_xyi = 0; - ad->offset_xyd = 0; /* Disable chroma keying function */ ad->ckmax_r = 0; @@ -304,195 +329,91 @@ int fsl_diu_init(int xres, unsigned int pixel_format, int gamma_fix) ad->ckmin_g = 255; ad->ckmin_b = 255; - gamma_table_base = gamma.paddr; - debug("gamma_table_base is allocated @ 0x%x\n", - (unsigned int)gamma_table_base); - - /* Prep for DIU init - gamma table */ - + /* Initialize the gamma table */ + if (allocate_buf(&gamma, 256 * 3, 32) < 0) { + printf("DIU: Out of memory\n"); + return -1; + } + gamma_table_base = gamma.vaddr; for (i = 0; i <= 2; i++) - for (j = 0; j <= 255; j++) + for (j = 0; j < 256; j++) *gamma_table_base++ = j; if (gamma_fix == 1) { /* fix the gamma */ - debug("Fix gamma table\n"); - gamma_table_base = gamma.paddr; - for (i = 0; i < 256*3; i++) { + gamma_table_base = gamma.vaddr; + for (i = 0; i < 256 * 3; i++) { gamma_table_base[i] = (gamma_table_base[i] << 2) | ((gamma_table_base[i] >> 6) & 0x03); } } - debug("update-lcdc: HW - %p\n Disabling DIU\n", hw); + /* Initialize the cursor */ + if (allocate_buf(&cursor, 32 * 32 * 2, 32) < 0) { + printf("DIU: Can't alloc cursor data\n"); + return -1; + } /* Program DIU registers */ + out_be32(&hw->diu_mode, 0); /* Temporarily disable the DIU */ - out_be32(&hw->gamma, (int)gamma.paddr); - out_be32(&hw->cursor, (int)cursor.paddr); + out_be32(&hw->gamma, gamma.paddr); + out_be32(&hw->cursor, cursor.paddr); out_be32(&hw->bgnd, 0x007F7F7F); - out_be32(&hw->bgnd_wb, 0); /* BGND_WB */ - out_be32(&hw->disp_size, var->yres << 16 | var->xres); /* DISP SIZE */ - out_be32(&hw->wb_size, 0); /* WB SIZE */ - out_be32(&hw->wb_mem_addr, 0); /* WB MEM ADDR */ - out_be32(&hw->hsyn_para, var->left_margin << 22 | /* BP_H */ - var->hsync_len << 11 | /* PW_H */ - var->right_margin); /* FP_H */ - - out_be32(&hw->vsyn_para, var->upper_margin << 22 | /* BP_V */ - var->vsync_len << 11 | /* PW_V */ - var->lower_margin); /* FP_V */ - - out_be32(&hw->syn_pol, 0); /* SYNC SIGNALS POLARITY */ - out_be32(&hw->thresholds, 0x00037800); /* The Thresholds */ - out_be32(&hw->int_status, 0); /* INTERRUPT STATUS */ - out_be32(&hw->int_mask, 0); /* INT MASK */ + out_be32(&hw->bgnd_wb, 0); + out_be32(&hw->disp_size, info.var.yres << 16 | info.var.xres); + out_be32(&hw->wb_size, 0); + out_be32(&hw->wb_mem_addr, 0); + out_be32(&hw->hsyn_para, info.var.left_margin << 22 | + info.var.hsync_len << 11 | + info.var.right_margin); + + out_be32(&hw->vsyn_para, info.var.upper_margin << 22 | + info.var.vsync_len << 11 | + info.var.lower_margin); + + out_be32(&hw->syn_pol, 0); + out_be32(&hw->thresholds, 0x00037800); + out_be32(&hw->int_status, 0); + out_be32(&hw->int_mask, 0); out_be32(&hw->plut, 0x01F5F666); /* Pixel Clock configuration */ - debug("DIU pixclock in ps - %d\n", var->pixclock); - diu_set_pixel_clock(var->pixclock); - - fb_initialized = 1; - - /* Enable the DIU */ - fsl_diu_enable_panel(info); - enable_lcdc(); - - return 0; -} - -char *fsl_fb_open(struct fb_info **info) -{ - *info = &fsl_fb_info; - return fsl_fb_info.screen_base; -} - -void fsl_diu_close(void) -{ - struct fb_info *info = &fsl_fb_info; - fsl_diu_disable_panel(info); -} + diu_set_pixel_clock(info.var.pixclock); -static int fsl_diu_enable_panel(struct fb_info *info) -{ - struct diu *hw = dr.diu_reg; - struct diu_ad *ad = &fsl_diu_fb_ad; - - debug("Entered: enable_panel\n"); - if (in_be32(&hw->desc[0]) != (unsigned)ad) - out_be32(&hw->desc[0], (unsigned)ad); - debug("desc[0] = 0x%x\n", hw->desc[0]); - return 0; -} + /* Set the frame buffers */ + out_be32(&hw->desc[0], virt_to_phys(ad)); + out_be32(&hw->desc[1], virt_to_phys(dummy_ad)); + out_be32(&hw->desc[2], virt_to_phys(dummy_ad)); -static int fsl_diu_disable_panel(struct fb_info *info) -{ - struct diu *hw = dr.diu_reg; + /* Enable the DIU, set display to all three planes */ + out_be32(&hw->diu_mode, 1); - debug("Entered: disable_panel\n"); - if (in_be32(&hw->desc[0]) != (unsigned)&dummy_ad) - out_be32(&hw->desc[0], (unsigned)&dummy_ad); return 0; } -static int map_video_memory(struct fb_info *info, unsigned long bytes_align) -{ - unsigned long offset; - unsigned long mask; - - debug("Entered: map_video_memory\n"); - /* allocate maximum 1280*1024 with 32bpp */ - info->smem_len = 1280 * 4 *1024 + bytes_align; - debug("MAP_VIDEO_MEMORY: smem_len = %d\n", info->smem_len); - info->screen_base = malloc(info->smem_len); - if (info->screen_base == NULL) { - printf("Unable to allocate fb memory\n"); - return -1; - } - info->smem_start = (unsigned int) info->screen_base; - mask = bytes_align - 1; - offset = (unsigned long)info->screen_base & mask; - if (offset) { - info->screen_base += (bytes_align - offset); - info->smem_len = info->smem_len - (bytes_align - offset); - } else - info->smem_len = info->smem_len - bytes_align; - - info->screen_size = info->smem_len; - - debug("Allocated fb @ 0x%08lx, size=%d.\n", - info->smem_start, info->smem_len); - - return 0; -} - -static void enable_lcdc(void) -{ - struct diu *hw = dr.diu_reg; - - debug("Entered: enable_lcdc, fb_enabled = %d\n", fb_enabled); - if (!fb_enabled) { - out_be32(&hw->diu_mode, dr.mode); - fb_enabled++; - } - debug("diu_mode = %d\n", hw->diu_mode); -} - -static void disable_lcdc(void) -{ - struct diu *hw = dr.diu_reg; - - debug("Entered: disable_lcdc, fb_enabled = %d\n", fb_enabled); - if (fb_enabled) { - out_be32(&hw->diu_mode, 0); - fb_enabled = 0; - } -} - -/* - * Align to 64-bit(8-byte), 32-byte, etc. - */ -static int allocate_buf(struct diu_addr *buf, u32 size, u32 bytes_align) +void *video_hw_init(void) { - u32 offset, ssize; - u32 mask; - - debug("Entered: allocate_buf\n"); - ssize = size + bytes_align; - buf->paddr = malloc(ssize); - if (!buf->paddr) - return -1; - - memset(buf->paddr, 0, ssize); - mask = bytes_align - 1; - offset = (u32)buf->paddr & mask; - if (offset) { - buf->offset = bytes_align - offset; - buf->paddr = (unsigned char *) ((u32)buf->paddr + offset); - } else - buf->offset = 0; - return 0; -} + static GraphicDevice ctfb; + const char *options; + unsigned int depth = 0, freq = 0; -#if defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE) -#include <stdio_dev.h> -#include <video_fb.h> -/* - * The Graphic Device - */ -static GraphicDevice ctfb; + if (!video_get_video_mode(&ctfb.winSizeX, &ctfb.winSizeY, &depth, &freq, + &options)) + return NULL; -void *video_hw_init(void) -{ - struct fb_info *info; + /* Find the monitor port, which is a required option */ + if (!options) + return NULL; + if (strncmp(options, "monitor=", 8) != 0) + return NULL; - if (platform_diu_init(&ctfb.winSizeX, &ctfb.winSizeY) < 0) + if (platform_diu_init(ctfb.winSizeX, ctfb.winSizeY, options + 8) < 0) return NULL; /* fill in Graphic device struct */ sprintf(ctfb.modeIdent, "%ix%ix%i %ikHz %iHz", - ctfb.winSizeX, ctfb.winSizeY, 32, 64, 60); + ctfb.winSizeX, ctfb.winSizeY, depth, 64, freq); - ctfb.frameAdrs = (unsigned int)fsl_fb_open(&info); + ctfb.frameAdrs = (unsigned int)info.screen_base; ctfb.plnSizeX = ctfb.winSizeX; ctfb.plnSizeY = ctfb.winSizeY; @@ -501,7 +422,7 @@ void *video_hw_init(void) ctfb.isaBase = 0; ctfb.pciBase = 0; - ctfb.memSize = info->screen_size; + ctfb.memSize = info.screen_size; /* Cursor Start Address */ ctfb.dprBase = 0; @@ -510,4 +431,3 @@ void *video_hw_init(void) return &ctfb; } -#endif /* defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE) */ diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c index 6dd952c..0c925a0 100644 --- a/drivers/video/mx3fb.c +++ b/drivers/video/mx3fb.c @@ -22,8 +22,8 @@ */ #include <common.h> #include <lcd.h> -#include <asm/arch/mx31.h> -#include <asm/arch/mx31-regs.h> +#include <asm/arch/clock.h> +#include <asm/arch/imx-regs.h> #include <asm/errno.h> DECLARE_GLOBAL_DATA_PTR; @@ -192,7 +192,7 @@ enum ipu_panel { }; /* IPU Common registers */ -/* IPU_CONF and its bits already defined in mx31-regs.h */ +/* IPU_CONF and its bits already defined in imx-regs.h */ #define IPU_CHA_BUF0_RDY (0x04 + IPU_BASE) #define IPU_CHA_BUF1_RDY (0x08 + IPU_BASE) #define IPU_CHA_DB_MODE_SEL (0x0C + IPU_BASE) diff --git a/drivers/video/videomodes.c b/drivers/video/videomodes.c index d27ce1d..6fe5811 100644 --- a/drivers/video/videomodes.c +++ b/drivers/video/videomodes.c @@ -1,6 +1,7 @@ /* * (C) Copyright 2004 * Pierre Aubert, Staubli Faverges , <p.aubert@staubli.com> + * Copyright 2011 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -73,6 +74,8 @@ ****************************************************************************/ #include <common.h> +#include <linux/ctype.h> + #include "videomodes.h" const struct ctfb_vesa_modes vesa_modes[VESA_MODES_COUNT] = { @@ -206,3 +209,64 @@ int video_get_params (struct ctfb_res_modes *pPar, char *penv) } return bpp; } + +/* + * Parse the 'video-mode' environment variable + * + * Example: "video-mode=fslfb:1280x1024-32@60,monitor=dvi". See + * doc/README.video for more information on how to set the variable. + * + * @xres: returned value of X-resolution + * @yres: returned value of Y-resolution + * @depth: returned value of color depth + * @freq: returned value of monitor frequency + * @options: pointer to any remaining options, or NULL + * + * Returns 1 if valid values were found, 0 otherwise + */ +int video_get_video_mode(unsigned int *xres, unsigned int *yres, + unsigned int *depth, unsigned int *freq, const char **options) +{ + char *p = getenv("video-mode"); + if (!p) + return 0; + + /* Skip over the driver name, which we don't care about. */ + p = strchr(p, ':'); + if (!p) + return 0; + + /* Get the X-resolution*/ + while (*p && !isdigit(*p)) + p++; + *xres = simple_strtoul(p, &p, 10); + if (!*xres) + return 0; + + /* Get the Y-resolution */ + while (*p && !isdigit(*p)) + p++; + *yres = simple_strtoul(p, &p, 10); + if (!*yres) + return 0; + + /* Get the depth */ + while (*p && !isdigit(*p)) + p++; + *depth = simple_strtoul(p, &p, 10); + if (!*depth) + return 0; + + /* Get the frequency */ + while (*p && !isdigit(*p)) + p++; + *freq = simple_strtoul(p, &p, 10); + if (!*freq) + return 0; + + /* Find the extra options, if any */ + p = strchr(p, ','); + *options = p ? p + 1 : NULL; + + return 1; +} diff --git a/drivers/video/videomodes.h b/drivers/video/videomodes.h index 0d7c335..e546ab4 100644 --- a/drivers/video/videomodes.h +++ b/drivers/video/videomodes.h @@ -86,3 +86,6 @@ extern const struct ctfb_vesa_modes vesa_modes[]; extern const struct ctfb_res_modes res_mode_init[]; int video_get_params (struct ctfb_res_modes *pPar, char *penv); + +int video_get_video_mode(unsigned int *xres, unsigned int *yres, + unsigned int *depth, unsigned int *freq, const char **options); diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index 6ab4d52..5579bf2 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -26,6 +26,7 @@ include $(TOPDIR)/config.mk LIB := $(obj)libwatchdog.o COBJS-$(CONFIG_AT91SAM9_WATCHDOG) += at91sam9_wdt.o +COBJS-$(CONFIG_FTWDT010_WATCHDOG) += ftwdt010_wdt.o COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) diff --git a/drivers/watchdog/ftwdt010_wdt.c b/drivers/watchdog/ftwdt010_wdt.c new file mode 100644 index 0000000..c9cb53e --- /dev/null +++ b/drivers/watchdog/ftwdt010_wdt.c @@ -0,0 +1,104 @@ +/* + * Watchdog driver for the FTWDT010 Watch Dog Driver + * + * (c) Copyright 2004 Faraday Technology Corp. (www.faraday-tech.com) + * Based on sa1100_wdt.c by Oleg Drokin <green@crimea.edu> + * Based on SoftDog driver by Alan Cox <alan@redhat.com> + * + * Copyright (C) 2011 Andes Technology Corporation + * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * 27/11/2004 Initial release, Faraday. + * 12/01/2011 Port to u-boot, Macpaul Lin. + */ + +#include <common.h> +#include <watchdog.h> +#include <asm/io.h> +#include <faraday/ftwdt010_wdt.h> + +/* + * Set the watchdog time interval. + * Counter is 32 bit. + */ +int ftwdt010_wdt_settimeout(unsigned int timeout) +{ + unsigned int reg; + + struct ftwdt010_wdt *wd = (struct ftwdt010_wdt *)CONFIG_FTWDT010_BASE; + + debug("Activating WDT..\n"); + + /* Check if disabled */ + if (readl(&wd->wdcr) & ~FTWDT010_WDCR_ENABLE) { + printf("sorry, watchdog is disabled\n"); + return -1; + } + + /* + * In a 66MHz system, + * if you set WDLOAD as 0x03EF1480 (66000000) + * the reset timer is 1 second. + */ + reg = FTWDT010_WDLOAD(timeout * FTWDT010_TIMEOUT_FACTOR); + + writel(reg, &wd->wdload); + + return 0; +} + +void ftwdt010_wdt_reset(void) +{ + struct ftwdt010_wdt *wd = (struct ftwdt010_wdt *)CONFIG_FTWDT010_BASE; + + /* clear control register */ + writel(0, &wd->wdcr); + + /* Write Magic number */ + writel(FTWDT010_WDRESTART_MAGIC, &wd->wdrestart); + + /* Enable WDT */ + writel((FTWDT010_WDCR_RST | FTWDT010_WDCR_ENABLE), &wd->wdcr); +} + +void ftwdt010_wdt_disable(void) +{ + struct ftwdt010_wdt *wd = (struct ftwdt010_wdt *)CONFIG_FTWDT010_BASE; + + debug("Deactivating WDT..\n"); + + /* + * It was defined with CONFIG_WATCHDOG_NOWAYOUT in Linux + * + * Shut off the timer. + * Lock it in if it's a module and we defined ...NOWAYOUT + */ + writel(0, &wd->wdcr); +} + +#if defined(CONFIG_HW_WATCHDOG) +void hw_watchdog_reset(void) +{ + ftwdt010_wdt_reset(); +} + +void hw_watchdog_init(void) +{ + /* set timer in ms */ + ftwdt010_wdt_settimeout(CONFIG_FTWDT010_HW_TIMEOUT * 1000); +} +#endif diff --git a/examples/standalone/Makefile b/examples/standalone/Makefile index c1dfdce..66b5d24 100644 --- a/examples/standalone/Makefile +++ b/examples/standalone/Makefile @@ -95,7 +95,7 @@ $(LIB): $(obj).depend $(LIBOBJS) $(ELF): $(obj)%: $(obj)%.o $(LIB) - $(LD) -g -Ttext $(STANDALONE_LOAD_ADDR) \ + $(LD) -g -Ttext $(CONFIG_STANDALONE_LOAD_ADDR) \ -o $@ -e $(SYM_PREFIX)$(notdir $(<:.o=)) $< $(LIB) \ -L$(gcclibdir) -lgcc diff --git a/examples/standalone/stubs.c b/examples/standalone/stubs.c index 2d2e709..507d38c 100644 --- a/examples/standalone/stubs.c +++ b/examples/standalone/stubs.c @@ -4,7 +4,7 @@ #define GCC_VERSION (__GNUC__ * 1000 + __GNUC_MINOR__) #endif /* GCC_VERSION */ -#if defined(CONFIG_I386) +#if defined(CONFIG_X86) /* * x86 does not have a dedicated register to store the pointer to * the global_data. Thus the jump table address is stored in a @@ -198,7 +198,7 @@ void app_startup(char * const *argv) *cp++ = 0; } -#if defined(CONFIG_I386) +#if defined(CONFIG_X86) /* x86 does not have a dedicated register for passing global_data */ global_data = (gd_t *)argv[-1]; jt = global_data->jt; diff --git a/fs/fat/fat.c b/fs/fat/fat.c index a75e4f2..c450bf6 100644 --- a/fs/fat/fat.c +++ b/fs/fat/fat.c @@ -209,7 +209,7 @@ static __u32 get_fatent (fsdata *mydata, __u32 entry) /* Read a new block of FAT entries into the cache. */ if (bufnum != mydata->fatbufnum) { - int getsize = FATBUFSIZE / FS_BLOCK_SIZE; + __u32 getsize = FATBUFSIZE / FS_BLOCK_SIZE; __u8 *bufptr = mydata->fatbuf; __u32 fatlength = mydata->fatlength; __u32 startblock = bufnum * FATBUFBLOCKS; @@ -279,7 +279,7 @@ static int get_cluster (fsdata *mydata, __u32 clustnum, __u8 *buffer, unsigned long size) { - int idx = 0; + __u32 idx = 0; __u32 startsect; if (clustnum > 0) { @@ -767,12 +767,13 @@ do_fat_read (const char *filename, void *buffer, unsigned long maxsize, dir_entry *dentptr; __u16 prevcksum = 0xffff; char *subname = ""; - int cursect; + __u32 cursect; int idx, isdir = 0; int files = 0, dirs = 0; long ret = 0; int firsttime; - int root_cluster; + __u32 root_cluster; + int rootdir_size = 0; int j; if (read_bootsectandvi(&bs, &volinfo, &mydata->fatsize)) { @@ -798,8 +799,6 @@ do_fat_read (const char *filename, void *buffer, unsigned long maxsize, mydata->data_begin = mydata->rootdir_sect - (mydata->clust_size * 2); } else { - int rootdir_size; - rootdir_size = ((bs.dir_entries[1] * (int)256 + bs.dir_entries[0]) * sizeof(dir_entry)) / @@ -1006,20 +1005,18 @@ do_fat_read (const char *filename, void *buffer, unsigned long maxsize, * root directory clusters when a cluster has been * completely processed. */ - if ((mydata->fatsize == 32) && (++j == mydata->clust_size)) { - int nxtsect; - int nxt_clust; + ++j; + int fat32_end = 0; + if ((mydata->fatsize == 32) && (j == mydata->clust_size)) { + int nxtsect = 0; + int nxt_clust = 0; nxt_clust = get_fatent(mydata, root_cluster); + fat32_end = CHECK_CLUST(nxt_clust, 32); nxtsect = mydata->data_begin + (nxt_clust * mydata->clust_size); - debug("END LOOP: sect=%d, root_clust=%d, " - "n_sect=%d, n_clust=%d\n", - cursect, root_cluster, - nxtsect, nxt_clust); - root_cluster = nxt_clust; cursect = nxtsect; @@ -1027,6 +1024,18 @@ do_fat_read (const char *filename, void *buffer, unsigned long maxsize, } else { cursect++; } + + /* If end of rootdir reached */ + if ((mydata->fatsize == 32 && fat32_end) || + (mydata->fatsize != 32 && j == rootdir_size)) { + if (dols == LS_ROOT) { + printf("\n%d file(s), %d dir(s)\n\n", + files, dirs); + return 0; + } else { + return -1; + } + } } rootdir_done: diff --git a/fs/jffs2/jffs2_1pass.c b/fs/jffs2/jffs2_1pass.c index c4f7445..5ddc2b9 100644 --- a/fs/jffs2/jffs2_1pass.c +++ b/fs/jffs2/jffs2_1pass.c @@ -794,7 +794,7 @@ jffs2_1pass_read_inode(struct b_lists *pL, u32 inode, char *dest) #endif default: /* unknown */ - putLabeledWord("UNKOWN COMPRESSION METHOD = ", jNode->compr); + putLabeledWord("UNKNOWN COMPRESSION METHOD = ", jNode->compr); put_fl_mem(jNode, pL->readbuf); return -1; break; diff --git a/fs/jffs2/jffs2_nand_1pass.c b/fs/jffs2/jffs2_nand_1pass.c index 3982003..740f787 100644 --- a/fs/jffs2/jffs2_nand_1pass.c +++ b/fs/jffs2/jffs2_nand_1pass.c @@ -350,7 +350,7 @@ jffs2_1pass_read_inode(struct b_lists *pL, u32 ino, char *dest, #endif default: /* unknown */ - putLabeledWord("UNKOWN COMPRESSION METHOD = ", inode->compr); + putLabeledWord("UNKNOWN COMPRESSION METHOD = ", inode->compr); return -1; } } diff --git a/include/common.h b/include/common.h index 893af5c..00e266e 100644 --- a/include/common.h +++ b/include/common.h @@ -180,11 +180,13 @@ typedef void (interrupt_handler_t)(void *); * General Purpose Utilities */ #define min(X, Y) \ - ({ typeof (X) __x = (X), __y = (Y); \ + ({ typeof (X) __x = (X); \ + typeof (Y) __y = (Y); \ (__x < __y) ? __x : __y; }) #define max(X, Y) \ - ({ typeof (X) __x = (X), __y = (Y); \ + ({ typeof (X) __x = (X); \ + typeof (Y) __y = (Y); \ (__x > __y) ? __x : __y; }) #define MIN(x, y) min(x, y) @@ -270,9 +272,9 @@ int setenv (char *, char *); # include <asm/setup.h> # include <asm/u-boot-arm.h> /* ARM version to be fixed! */ #endif /* CONFIG_ARM */ -#ifdef CONFIG_I386 /* x86 version to be fixed! */ -# include <asm/u-boot-i386.h> -#endif /* CONFIG_I386 */ +#ifdef CONFIG_X86 /* x86 version to be fixed! */ +# include <asm/u-boot-x86.h> +#endif /* CONFIG_X86 */ #ifdef CONFIG_AUTO_COMPLETE int env_complete(char *var, int maxv, char *cmdv[], int maxsz, char *buf); @@ -447,6 +449,11 @@ void out16(unsigned int, unsigned short value); #if defined (CONFIG_MPC83xx) void ppcDWload(unsigned int *addr, unsigned int *ret); void ppcDWstore(unsigned int *addr, unsigned int *value); +void disable_addr_trans(void); +void enable_addr_trans(void); +#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) +void ddr_enable_ecc(unsigned int dram_size); +#endif #endif /* $(CPU)/cpu.c */ @@ -538,6 +545,10 @@ ulong get_ddr_freq (ulong); #if defined(CONFIG_MPC86xx) typedef MPC86xx_SYS_INFO sys_info_t; void get_sys_info ( sys_info_t * ); +static inline ulong get_ddr_freq(ulong dummy) +{ + return get_bus_freq(dummy); +} #endif #if defined(CONFIG_4xx) || defined(CONFIG_IOP480) diff --git a/include/config_cmd_defaults.h b/include/config_cmd_defaults.h index 9283daa..a55b268 100644 --- a/include/config_cmd_defaults.h +++ b/include/config_cmd_defaults.h @@ -1,7 +1,7 @@ /* * config_cmd_defaults.h - sane defaults for everyone * - * Copyright (c) 2010 Analog Devices Inc. + * Copyright (c) 2010-2011 Analog Devices Inc. * * Licensed under the GPL-2 or later. */ @@ -10,5 +10,9 @@ #define _CONFIG_CMD_DEFAULTS_H_ #define CONFIG_CMD_BOOTM 1 +#define CONFIG_CMD_CRC32 1 +#define CONFIG_CMD_EXPORTENV 1 +#define CONFIG_CMD_GO 1 +#define CONFIG_CMD_IMPORTENV 1 #endif diff --git a/include/config_defaults.h b/include/config_defaults.h index abdf3be..0337163 100644 --- a/include/config_defaults.h +++ b/include/config_defaults.h @@ -12,7 +12,6 @@ /* Support bootm-ing different OSes */ #define CONFIG_BOOTM_LINUX 1 #define CONFIG_BOOTM_NETBSD 1 -#define CONFIG_BOOTM_OSE 1 #define CONFIG_BOOTM_RTEMS 1 #define CONFIG_GZIP 1 diff --git a/include/config_phylib_all_drivers.h b/include/config_phylib_all_drivers.h new file mode 100644 index 0000000..903c7a7 --- /dev/null +++ b/include/config_phylib_all_drivers.h @@ -0,0 +1,32 @@ +/* + * Enable all PHYs + * + * This software may be used and distributed according to the + * terms of the GNU Public License, Version 2, incorporated + * herein by reference. + * + * Copyright 2011 Freescale Semiconductor, Inc. + * author Andy Fleming + * + */ +#ifndef _CONFIG_PHYLIB_ALL_H +#define _CONFIG_PHYLIB_ALL_H + +#ifdef CONFIG_PHYLIB + +#define CONFIG_PHY_VITESSE +#define CONFIG_PHY_MARVELL +#define CONFIG_PHY_MICREL +#define CONFIG_PHY_BROADCOM +#define CONFIG_PHY_DAVICOM +#define CONFIG_PHY_REALTEK +#define CONFIG_PHY_NATSEMI +#define CONFIG_PHY_LXT + +#ifdef CONFIG_PHYLIB_10G +#define CONFIG_PHY_TERANETICS +#endif /* CONFIG_PHYLIB_10G */ + +#endif /* CONFIG_PHYLIB */ + +#endif /*_CONFIG_PHYLIB_ALL_H */ diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h index 1191eea..e25d5ac 100644 --- a/include/configs/MPC8323ERDB.h +++ b/include/configs/MPC8323ERDB.h @@ -348,7 +348,7 @@ #define CONFIG_SYS_UEC1_TX_CLK QE_CLK10 #define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH #define CONFIG_SYS_UEC1_PHY_ADDR 4 -#define CONFIG_SYS_UEC1_INTERFACE_TYPE MII +#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_MII #define CONFIG_SYS_UEC1_INTERFACE_SPEED 100 #endif @@ -360,7 +360,7 @@ #define CONFIG_SYS_UEC2_TX_CLK QE_CLK3 #define CONFIG_SYS_UEC2_ETH_TYPE FAST_ETH #define CONFIG_SYS_UEC2_PHY_ADDR 0 -#define CONFIG_SYS_UEC2_INTERFACE_TYPE MII +#define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_MII #define CONFIG_SYS_UEC2_INTERFACE_SPEED 100 #endif diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h index affa3a9..f136a8e 100644 --- a/include/configs/MPC832XEMDS.h +++ b/include/configs/MPC832XEMDS.h @@ -361,7 +361,7 @@ #define CONFIG_SYS_UEC1_TX_CLK QE_CLK10 #define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH #define CONFIG_SYS_UEC1_PHY_ADDR 3 -#define CONFIG_SYS_UEC1_INTERFACE_TYPE MII +#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_MII #define CONFIG_SYS_UEC1_INTERFACE_SPEED 100 #endif @@ -373,7 +373,7 @@ #define CONFIG_SYS_UEC2_TX_CLK QE_CLK8 #define CONFIG_SYS_UEC2_ETH_TYPE FAST_ETH #define CONFIG_SYS_UEC2_PHY_ADDR 4 -#define CONFIG_SYS_UEC2_INTERFACE_TYPE MII +#define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_MII #define CONFIG_SYS_UEC2_INTERFACE_SPEED 100 #endif diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h index a959940..49d64a5 100644 --- a/include/configs/MPC8360EMDS.h +++ b/include/configs/MPC8360EMDS.h @@ -402,7 +402,7 @@ #define CONFIG_SYS_UEC1_TX_CLK QE_CLK9 #define CONFIG_SYS_UEC1_ETH_TYPE GIGA_ETH #define CONFIG_SYS_UEC1_PHY_ADDR 0 -#define CONFIG_SYS_UEC1_INTERFACE_TYPE RGMII_ID +#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID #define CONFIG_SYS_UEC1_INTERFACE_SPEED 1000 #endif @@ -414,7 +414,7 @@ #define CONFIG_SYS_UEC2_TX_CLK QE_CLK4 #define CONFIG_SYS_UEC2_ETH_TYPE GIGA_ETH #define CONFIG_SYS_UEC2_PHY_ADDR 1 -#define CONFIG_SYS_UEC2_INTERFACE_TYPE RGMII_ID +#define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID #define CONFIG_SYS_UEC2_INTERFACE_SPEED 1000 #endif diff --git a/include/configs/MPC8360ERDK.h b/include/configs/MPC8360ERDK.h index b0cdc02..a4f42cf 100644 --- a/include/configs/MPC8360ERDK.h +++ b/include/configs/MPC8360ERDK.h @@ -319,7 +319,7 @@ #define CONFIG_SYS_UEC1_TX_CLK QE_CLK9 #define CONFIG_SYS_UEC1_ETH_TYPE GIGA_ETH #define CONFIG_SYS_UEC1_PHY_ADDR 2 -#define CONFIG_SYS_UEC1_INTERFACE_TYPE RGMII_RXID +#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_RXID #define CONFIG_SYS_UEC1_INTERFACE_SPEED 1000 #endif @@ -331,7 +331,7 @@ #define CONFIG_SYS_UEC2_TX_CLK QE_CLK4 #define CONFIG_SYS_UEC2_ETH_TYPE GIGA_ETH #define CONFIG_SYS_UEC2_PHY_ADDR 4 -#define CONFIG_SYS_UEC2_INTERFACE_TYPE RGMII_RXID +#define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_RXID #define CONFIG_SYS_UEC2_INTERFACE_SPEED 1000 #endif diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h index 13300de..7f7ff9f 100644 --- a/include/configs/MPC8536DS.h +++ b/include/configs/MPC8536DS.h @@ -40,6 +40,7 @@ #define CONFIG_SYS_TEXT_BASE_SPL 0xfff00000 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE_SPL /* start of monitor */ #else +#define CONFIG_SYS_LDSCRIPT $(TOPDIR)/$(CPUDIR)/u-boot-nand.lds #define CONFIG_SYS_TEXT_BASE 0xf8f82000 #endif /* CONFIG_NAND_SPL */ #endif @@ -360,13 +361,13 @@ #define CONFIG_SYS_NAND_U_BOOT_RELOC_SP ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF) /* NAND flash config */ -#define CONFIG_NAND_BR_PRELIM \ +#define CONFIG_SYS_NAND_BR_PRELIM \ (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ | BR_PS_8 /* Port Size = 8 bit */ \ | BR_MS_FCM /* MSEL = FCM */ \ | BR_V) /* valid */ -#define CONFIG_NAND_OR_PRELIM (0xFFFC0000 /* length 256K */ \ +#define CONFIG_SYS_NAND_OR_PRELIM (0xFFFC0000 /* length 256K */ \ | OR_FCM_PGS /* Large Page*/ \ | OR_FCM_CSCT \ | OR_FCM_CST \ @@ -376,15 +377,15 @@ | OR_FCM_EHTR) #ifdef CONFIG_RAMBOOT_NAND -#define CONFIG_SYS_BR0_PRELIM CONFIG_NAND_BR_PRELIM /* NAND Base Address */ -#define CONFIG_SYS_OR0_PRELIM CONFIG_NAND_OR_PRELIM /* NAND Options */ +#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ +#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ #define CONFIG_SYS_BR2_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ #define CONFIG_SYS_OR2_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ #else #define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ #define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ -#define CONFIG_SYS_BR2_PRELIM CONFIG_NAND_BR_PRELIM /* NAND Base Address */ -#define CONFIG_SYS_OR2_PRELIM CONFIG_NAND_OR_PRELIM /* NAND Options */ +#define CONFIG_SYS_BR2_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ +#define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ #endif #define CONFIG_SYS_BR4_PRELIM \ @@ -393,14 +394,14 @@ | BR_PS_8 /* Port Size = 8 bit */ \ | BR_MS_FCM /* MSEL = FCM */ \ | BR_V) /* valid */ -#define CONFIG_SYS_OR4_PRELIM CONFIG_NAND_OR_PRELIM /* NAND Options */ +#define CONFIG_SYS_OR4_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ #define CONFIG_SYS_BR5_PRELIM \ (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS + 0x80000)) \ | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ | BR_PS_8 /* Port Size = 8 bit */ \ | BR_MS_FCM /* MSEL = FCM */ \ | BR_V) /* valid */ -#define CONFIG_SYS_OR5_PRELIM CONFIG_NAND_OR_PRELIM /* NAND Options */ +#define CONFIG_SYS_OR5_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ #define CONFIG_SYS_BR6_PRELIM \ (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS + 0xc0000)) \ @@ -408,7 +409,7 @@ | BR_PS_8 /* Port Size = 8 bit */ \ | BR_MS_FCM /* MSEL = FCM */ \ | BR_V) /* valid */ -#define CONFIG_SYS_OR6_PRELIM CONFIG_NAND_OR_PRELIM /* NAND Options */ +#define CONFIG_SYS_OR6_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ /* Serial Port - controlled on board with jumper J8 * open - index 2 @@ -720,11 +721,11 @@ /* * For booting Linux, the board info and command line data - * have to be in the first 16 MB of memory, since this is + * have to be in the first 64 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux */ -#define CONFIG_SYS_BOOTM_LEN (16 << 20) /* Increase max gunzip size */ +#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux */ +#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h index 8b3aff8..e1d933e 100644 --- a/include/configs/MPC8540ADS.h +++ b/include/configs/MPC8540ADS.h @@ -420,11 +420,11 @@ /* * For booting Linux, the board info and command line data - * have to be in the first 16 MB of memory, since this is + * have to be in the first 64 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux*/ -#define CONFIG_SYS_BOOTM_LEN (16 << 20) /* Increase max gunzip size */ +#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/ +#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h index 7101230..5918e64 100644 --- a/include/configs/MPC8541CDS.h +++ b/include/configs/MPC8541CDS.h @@ -432,11 +432,11 @@ extern unsigned long get_clock_freq(void); /* * For booting Linux, the board info and command line data - * have to be in the first 16 MB of memory, since this is + * have to be in the first 64 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux*/ -#define CONFIG_SYS_BOOTM_LEN (16 << 20) /* Increase max gunzip size */ +#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/ +#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h index 62bac6d..b25fb55 100644 --- a/include/configs/MPC8544DS.h +++ b/include/configs/MPC8544DS.h @@ -452,11 +452,11 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); /* * For booting Linux, the board info and command line data - * have to be in the first 16 MB of memory, since this is + * have to be in the first 64 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux*/ -#define CONFIG_SYS_BOOTM_LEN (16 << 20) /* Increase max gunzip size */ +#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/ +#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index 43e2c2e..0c0ae02 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -491,11 +491,11 @@ extern unsigned long get_clock_freq(void); /* * For booting Linux, the board info and command line data - * have to be in the first 16 MB of memory, since this is + * have to be in the first 64 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux*/ -#define CONFIG_SYS_BOOTM_LEN (16 << 20) /* Increase max gunzip size */ +#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/ +#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h index 106034d..4c580a3 100644 --- a/include/configs/MPC8555CDS.h +++ b/include/configs/MPC8555CDS.h @@ -430,11 +430,11 @@ extern unsigned long get_clock_freq(void); /* * For booting Linux, the board info and command line data - * have to be in the first 16 MB of memory, since this is + * have to be in the first 64 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux*/ -#define CONFIG_SYS_BOOTM_LEN (16 << 20) /* Increase max gunzip size */ +#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/ +#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h index 15ebb6f..f55ef9d 100644 --- a/include/configs/MPC8560ADS.h +++ b/include/configs/MPC8560ADS.h @@ -461,11 +461,11 @@ /* * For booting Linux, the board info and command line data - * have to be in the first 16 MB of memory, since this is + * have to be in the first 64 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux*/ -#define CONFIG_SYS_BOOTM_LEN (16 << 20) /* Increase max gunzip size */ +#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/ +#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h index 3674e49..f7df7f0 100644 --- a/include/configs/MPC8568MDS.h +++ b/include/configs/MPC8568MDS.h @@ -334,7 +334,7 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_UEC1_TX_CLK QE_CLK16 #define CONFIG_SYS_UEC1_ETH_TYPE GIGA_ETH #define CONFIG_SYS_UEC1_PHY_ADDR 7 -#define CONFIG_SYS_UEC1_INTERFACE_TYPE RGMII_ID +#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID #define CONFIG_SYS_UEC1_INTERFACE_SPEED 1000 #endif @@ -346,7 +346,7 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_UEC2_TX_CLK QE_CLK16 #define CONFIG_SYS_UEC2_ETH_TYPE GIGA_ETH #define CONFIG_SYS_UEC2_PHY_ADDR 1 -#define CONFIG_SYS_UEC2_INTERFACE_TYPE RGMII_ID +#define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID #define CONFIG_SYS_UEC2_INTERFACE_SPEED 1000 #endif #endif /* CONFIG_QE */ @@ -451,11 +451,11 @@ extern unsigned long get_clock_freq(void); /* * For booting Linux, the board info and command line data - * have to be in the first 16 MB of memory, since this is + * have to be in the first 64 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux*/ -#define CONFIG_SYS_BOOTM_LEN (16 << 20) /* Increase max gunzip size */ +#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/ +#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h index 9e24e12..fa626bb 100644 --- a/include/configs/MPC8569MDS.h +++ b/include/configs/MPC8569MDS.h @@ -72,6 +72,7 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_TEXT_BASE_SPL 0xfff00000 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE_SPL /* start of monitor */ #else +#define CONFIG_SYS_LDSCRIPT $(TOPDIR)/$(CPUDIR)/u-boot-nand.lds #define CONFIG_SYS_TEXT_BASE 0xf8f82000 #endif #endif @@ -138,8 +139,7 @@ extern unsigned long get_clock_freq(void); #define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) /* I2C addresses of SPD EEPROMs */ -#define SPD_EEPROM_ADDRESS1 0x51 /* CTLR 0 DIMM 0 */ -#define SPD_EEPROM_ADDRESS2 0x52 /* CTLR 1 DIMM 0 */ +#define SPD_EEPROM_ADDRESS 0x51 /* CTLR 0 DIMM 0 */ /* These are used when DDR doesn't use SPD. */ #define CONFIG_SYS_SDRAM_SIZE 1024 /* DDR is 1024MB */ @@ -240,12 +240,12 @@ extern unsigned long get_clock_freq(void); #define CONFIG_CMD_NAND 1 #define CONFIG_NAND_FSL_ELBC 1 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) -#define CONFIG_NAND_BR_PRELIM (CONFIG_SYS_NAND_BASE_PHYS \ +#define CONFIG_SYS_NAND_BR_PRELIM (CONFIG_SYS_NAND_BASE_PHYS \ | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ | BR_PS_8 /* Port Size = 8 bit */ \ | BR_MS_FCM /* MSEL = FCM */ \ | BR_V) /* valid */ -#define CONFIG_NAND_OR_PRELIM (0xFFFC0000 /* length 256K */ \ +#define CONFIG_SYS_NAND_OR_PRELIM (0xFFFC0000 /* length 256K */ \ | OR_FCM_CSCT \ | OR_FCM_CST \ | OR_FCM_CHT \ @@ -254,15 +254,15 @@ extern unsigned long get_clock_freq(void); | OR_FCM_EHTR) #ifdef CONFIG_RAMBOOT_NAND -#define CONFIG_SYS_BR0_PRELIM CONFIG_NAND_BR_PRELIM /* NAND Base Address */ -#define CONFIG_SYS_OR0_PRELIM CONFIG_NAND_OR_PRELIM /* NAND Options */ +#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ +#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM/* NAND Options */ #define CONFIG_SYS_BR3_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ #define CONFIG_SYS_OR3_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ #else #define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ #define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ -#define CONFIG_SYS_BR3_PRELIM CONFIG_NAND_BR_PRELIM /* NAND Base Address */ -#define CONFIG_SYS_OR3_PRELIM CONFIG_NAND_OR_PRELIM /* NAND Options */ +#define CONFIG_SYS_BR3_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ +#define CONFIG_SYS_OR3_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ #endif #define CONFIG_SYS_LBC_LCRR 0x00000004 /* LB clock ratio reg */ @@ -385,13 +385,13 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_UEC1_TX_CLK QE_CLK12 #define CONFIG_SYS_UEC1_ETH_TYPE GIGA_ETH #define CONFIG_SYS_UEC1_PHY_ADDR 7 -#define CONFIG_SYS_UEC1_INTERFACE_TYPE RGMII_ID +#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID #define CONFIG_SYS_UEC1_INTERFACE_SPEED 1000 #elif defined(CONFIG_SYS_UCC_RMII_MODE) #define CONFIG_SYS_UEC1_TX_CLK QE_CLK16 /* CLK16 for RMII */ #define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH #define CONFIG_SYS_UEC1_PHY_ADDR 8 /* 0x8 for RMII */ -#define CONFIG_SYS_UEC1_INTERFACE_TYPE RMII +#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII #define CONFIG_SYS_UEC1_INTERFACE_SPEED 100 #endif /* CONFIG_SYS_UCC_RGMII_MODE */ #endif /* CONFIG_UEC_ETH1 */ @@ -406,13 +406,13 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_UEC2_TX_CLK QE_CLK17 #define CONFIG_SYS_UEC2_ETH_TYPE GIGA_ETH #define CONFIG_SYS_UEC2_PHY_ADDR 1 -#define CONFIG_SYS_UEC2_INTERFACE_TYPE RGMII_ID +#define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID #define CONFIG_SYS_UEC2_INTERFACE_SPEED 1000 #elif defined(CONFIG_SYS_UCC_RMII_MODE) #define CONFIG_SYS_UEC2_TX_CLK QE_CLK16 /* CLK 16 for RMII */ #define CONFIG_SYS_UEC2_ETH_TYPE FAST_ETH #define CONFIG_SYS_UEC2_PHY_ADDR 0x9 /* 0x9 for RMII */ -#define CONFIG_SYS_UEC2_INTERFACE_TYPE RMII +#define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII #define CONFIG_SYS_UEC2_INTERFACE_SPEED 100 #endif /* CONFIG_SYS_UCC_RGMII_MODE */ #endif /* CONFIG_UEC_ETH2 */ @@ -427,13 +427,13 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_UEC3_TX_CLK QE_CLK12 #define CONFIG_SYS_UEC3_ETH_TYPE GIGA_ETH #define CONFIG_SYS_UEC3_PHY_ADDR 2 -#define CONFIG_SYS_UEC3_INTERFACE_TYPE RGMII_ID +#define CONFIG_SYS_UEC3_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID #define CONFIG_SYS_UEC3_INTERFACE_SPEED 1000 #elif defined(CONFIG_SYS_UCC_RMII_MODE) #define CONFIG_SYS_UEC3_TX_CLK QE_CLK16 /* CLK_16 for RMII */ #define CONFIG_SYS_UEC3_ETH_TYPE FAST_ETH #define CONFIG_SYS_UEC3_PHY_ADDR 0xA /* 0xA for RMII */ -#define CONFIG_SYS_UEC3_INTERFACE_TYPE RMII +#define CONFIG_SYS_UEC3_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII #define CONFIG_SYS_UEC3_INTERFACE_SPEED 100 #endif /* CONFIG_SYS_UCC_RGMII_MODE */ #endif /* CONFIG_UEC_ETH3 */ @@ -448,13 +448,13 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_UEC4_TX_CLK QE_CLK17 #define CONFIG_SYS_UEC4_ETH_TYPE GIGA_ETH #define CONFIG_SYS_UEC4_PHY_ADDR 3 -#define CONFIG_SYS_UEC4_INTERFACE_TYPE RGMII_ID +#define CONFIG_SYS_UEC4_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID #define CONFIG_SYS_UEC4_INTERFACE_SPEED 1000 #elif defined(CONFIG_SYS_UCC_RMII_MODE) #define CONFIG_SYS_UEC4_TX_CLK QE_CLK16 /* CLK16 for RMII */ #define CONFIG_SYS_UEC4_ETH_TYPE FAST_ETH #define CONFIG_SYS_UEC4_PHY_ADDR 0xB /* 0xB for RMII */ -#define CONFIG_SYS_UEC4_INTERFACE_TYPE RMII +#define CONFIG_SYS_UEC4_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII #define CONFIG_SYS_UEC4_INTERFACE_SPEED 100 #endif /* CONFIG_SYS_UCC_RGMII_MODE */ #endif /* CONFIG_UEC_ETH4 */ @@ -468,7 +468,7 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_UEC6_TX_CLK QE_CLK_NONE #define CONFIG_SYS_UEC6_ETH_TYPE GIGA_ETH #define CONFIG_SYS_UEC6_PHY_ADDR 4 -#define CONFIG_SYS_UEC6_INTERFACE_TYPE SGMII +#define CONFIG_SYS_UEC6_INTERFACE_TYPE PHY_INTERFACE_MODE_SGMII #define CONFIG_SYS_UEC6_INTERFACE_SPEED 1000 #endif /* CONFIG_UEC_ETH6 */ @@ -481,7 +481,7 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_UEC8_TX_CLK QE_CLK_NONE #define CONFIG_SYS_UEC8_ETH_TYPE GIGA_ETH #define CONFIG_SYS_UEC8_PHY_ADDR 6 -#define CONFIG_SYS_UEC8_INTERFACE_TYPE SGMII +#define CONFIG_SYS_UEC8_INTERFACE_TYPE PHY_INTERFACE_MODE_SGMII #define CONFIG_SYS_UEC8_INTERFACE_SPEED 1000 #endif /* CONFIG_UEC_ETH8 */ @@ -590,11 +590,11 @@ extern unsigned long get_clock_freq(void); /* * For booting Linux, the board info and command line data - * have to be in the first 16 MB of memory, since this is + * have to be in the first 64 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux*/ -#define CONFIG_SYS_BOOTM_LEN (16 << 20) /* Increase max gunzip size */ +#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/ +#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h index bf2fdd6..bb8fb66 100644 --- a/include/configs/MPC8572DS.h +++ b/include/configs/MPC8572DS.h @@ -40,6 +40,7 @@ #define CONFIG_SYS_TEXT_BASE_SPL 0xfff00000 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE_SPL /* start of monitor */ #else +#define CONFIG_SYS_LDSCRIPT $(TOPDIR)/$(CPUDIR)/u-boot-nand.lds #define CONFIG_SYS_TEXT_BASE 0xf8f82000 #endif /* CONFIG_NAND_SPL */ #endif @@ -361,12 +362,12 @@ /* NAND flash config */ -#define CONFIG_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ +#define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ | BR_PS_8 /* Port Size = 8 bit */ \ | BR_MS_FCM /* MSEL = FCM */ \ | BR_V) /* valid */ -#define CONFIG_NAND_OR_PRELIM (0xFFFC0000 /* length 256K */ \ +#define CONFIG_SYS_NAND_OR_PRELIM (0xFFFC0000 /* length 256K */ \ | OR_FCM_PGS /* Large Page*/ \ | OR_FCM_CSCT \ | OR_FCM_CST \ @@ -376,35 +377,35 @@ | OR_FCM_EHTR) #ifdef CONFIG_RAMBOOT_NAND -#define CONFIG_SYS_BR0_PRELIM CONFIG_NAND_BR_PRELIM /* NAND Base Address */ -#define CONFIG_SYS_OR0_PRELIM CONFIG_NAND_OR_PRELIM /* NAND Options */ +#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ +#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ #define CONFIG_SYS_BR2_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ #define CONFIG_SYS_OR2_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ #else #define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ #define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ -#define CONFIG_SYS_BR2_PRELIM CONFIG_NAND_BR_PRELIM /* NAND Base Address */ -#define CONFIG_SYS_OR2_PRELIM CONFIG_NAND_OR_PRELIM /* NAND Options */ +#define CONFIG_SYS_BR2_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ +#define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ #endif #define CONFIG_SYS_BR4_PRELIM (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS + 0x40000))\ | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ | BR_PS_8 /* Port Size = 8 bit */ \ | BR_MS_FCM /* MSEL = FCM */ \ | BR_V) /* valid */ -#define CONFIG_SYS_OR4_PRELIM CONFIG_NAND_OR_PRELIM /* NAND Options */ +#define CONFIG_SYS_OR4_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ #define CONFIG_SYS_BR5_PRELIM (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS + 0x80000))\ | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ | BR_PS_8 /* Port Size = 8 bit */ \ | BR_MS_FCM /* MSEL = FCM */ \ | BR_V) /* valid */ -#define CONFIG_SYS_OR5_PRELIM CONFIG_NAND_OR_PRELIM /* NAND Options */ +#define CONFIG_SYS_OR5_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ #define CONFIG_SYS_BR6_PRELIM (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS + 0xc0000))\ | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ | BR_PS_8 /* Port Size = 8 bit */ \ | BR_MS_FCM /* MSEL = FCM */ \ | BR_V) /* valid */ -#define CONFIG_SYS_OR6_PRELIM CONFIG_NAND_OR_PRELIM /* NAND Options */ +#define CONFIG_SYS_OR6_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ /* Serial Port - controlled on board with jumper J8 @@ -671,6 +672,20 @@ #define CONFIG_CMD_EXT2 #endif +/* + * USB + */ +#define CONFIG_USB_EHCI + +#ifdef CONFIG_USB_EHCI +#define CONFIG_CMD_USB +#define CONFIG_USB_EHCI_PCI +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET +#define CONFIG_USB_STORAGE +#define CONFIG_PCI_EHCI_DEVICE 0 +#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2 +#endif + #undef CONFIG_WATCHDOG /* watchdog disabled */ /* @@ -693,11 +708,11 @@ /* * For booting Linux, the board info and command line data - * have to be in the first 16 MB of memory, since this is + * have to be in the first 64 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux*/ -#define CONFIG_SYS_BOOTM_LEN (16 << 20) /* Increase max gunzip size */ +#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/ +#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ @@ -740,7 +755,7 @@ #define CONFIG_BAUDRATE 115200 #define CONFIG_EXTRA_ENV_SETTINGS \ - "memctl_intlv_ctl=2\0" \ + "hwconfig=fsl_ddr:ctlr_intlv=bank,ecc=off\0" \ "netdev=eth0\0" \ "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ "tftpflash=tftpboot $loadaddr $uboot; " \ diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h index 03ee394..31dbc3b 100644 --- a/include/configs/MPC8610HPCD.h +++ b/include/configs/MPC8610HPCD.h @@ -1,5 +1,5 @@ /* - * Copyright 2007, 2010 Freescale Semiconductor, Inc. + * Copyright 2007-2011 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -21,14 +21,16 @@ #define CONFIG_SYS_TEXT_BASE 0xfff00000 -#define CONFIG_FSL_DIU_FB 1 /* FSL DIU */ /* video */ -#undef CONFIG_VIDEO +#define CONFIG_FSL_DIU_FB -#ifdef CONFIG_VIDEO +#ifdef CONFIG_FSL_DIU_FB +#define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR + 0x2c000) +#define CONFIG_VIDEO #define CONFIG_CMD_BMP #define CONFIG_CFB_CONSOLE +#define CONFIG_VIDEO_SW_CURSOR #define CONFIG_VGA_AS_SINGLE_DEVICE #define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO @@ -88,8 +90,6 @@ #define CONFIG_SYS_CCSRBAR_PHYS_HIGH 0x0 #define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR_PHYS_LOW -#define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR+0x2c000) - /* DDR Setup */ #define CONFIG_FSL_DDR2 #undef CONFIG_FSL_DDR_INTERACTIVE @@ -108,7 +108,7 @@ #define CONFIG_DIMM_SLOTS_PER_CTLR 1 #define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) -#define SPD_EEPROM_ADDRESS1 0x51 /* CTLR 0 DIMM 0 */ +#define SPD_EEPROM_ADDRESS 0x51 /* CTLR 0 DIMM 0 */ /* These are used when DDR doesn't use SPD. */ #define CONFIG_SYS_SDRAM_SIZE 256 /* DDR is 256MB */ @@ -494,9 +494,6 @@ #define CONFIG_WATCHDOG /* watchdog enabled */ #define CONFIG_SYS_WATCHDOG_FREQ 5000 /* Feed interval, 5s */ -/*DIU Configuration*/ -#define DIU_CONNECT_TO_DVI /* DIU controller connects to DVI encoder*/ - /* * Miscellaneous configurable options */ @@ -630,8 +627,6 @@ "diuregs=md e002c000 1d\0" \ "dium=mw e002c01c\0" \ "diuerr=md e002c014 1\0" \ - "othbootargs=diufb=15M video=fslfb:1280x1024-32@60,monitor=0 debug\0" \ - "monitor=0-DVI\0" \ "pmregs=md e00e1000 2b\0" \ "lawregs=md e0000c08 4b\0" \ "lbcregs=md e0005000 36\0" \ @@ -651,9 +646,7 @@ "ramdiskfile=8610hpcd/ramdisk.uboot\0" \ "fdtaddr=c00000\0" \ "fdtfile=8610hpcd/mpc8610_hpcd.dtb\0" \ - "bdev=sda3\0" \ - "othbootargs=diufb=15M video=fslfb:1280x1024-32@60,monitor=0\0"\ - "monitor=0-DVI\0" + "bdev=sda3\0" #endif #define CONFIG_NFSBOOTCOMMAND \ diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index 0cca603..0ddb76f 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -90,8 +90,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0) #endif -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ - #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest region */ #define CONFIG_SYS_MEMTEST_END 0x00400000 diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h index 84b7e1d..a118975 100644 --- a/include/configs/P1022DS.h +++ b/include/configs/P1022DS.h @@ -14,6 +14,10 @@ #include "../board/freescale/common/ics307_clk.h" +#ifdef CONFIG_36BIT +#define CONFIG_PHYS_64BIT +#endif + /* High Level Configuration Options */ #define CONFIG_BOOKE /* BOOKE */ #define CONFIG_E500 /* BOOKE e500 family */ @@ -39,10 +43,11 @@ #define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */ #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ -#define CONFIG_PHYS_64BIT +#ifdef CONFIG_PHYS_64BIT #define CONFIG_ENABLE_36BIT_PHYS #define CONFIG_ADDR_MAP #define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */ +#endif #define CONFIG_FSL_LAW /* Use common FSL init code */ @@ -65,7 +70,11 @@ */ #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ #define CONFIG_SYS_CCSRBAR 0xffe00000 /* relocated CCSRBAR */ +#ifdef CONFIG_PHYS_64BIT #define CONFIG_SYS_CCSRBAR_PHYS 0xfffe00000ull +#else +#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR +#endif #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* DDR Setup */ @@ -87,7 +96,7 @@ /* I2C addresses of SPD EEPROMs */ #define CONFIG_SYS_SPD_BUS_NUM 1 -#define SPD_EEPROM_ADDRESS1 0x51 /* CTLR 0 DIMM 0 */ +#define SPD_EEPROM_ADDRESS 0x51 /* CTLR 0 DIMM 0 */ /* * Memory map @@ -111,7 +120,11 @@ * Local Bus Definitions */ #define CONFIG_SYS_FLASH_BASE 0xe0000000 /* start of FLASH 128M */ +#ifdef CONFIG_PHYS_64BIT #define CONFIG_SYS_FLASH_BASE_PHYS 0xfe0000000ull +#else +#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE +#endif #define CONFIG_FLASH_BR_PRELIM \ (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000)) | BR_PS_16 | BR_V) @@ -145,7 +158,11 @@ #define CONFIG_FSL_NGPIXIS #define PIXIS_BASE 0xffdf0000 /* PIXIS registers */ +#ifdef CONFIG_PHYS_64BIT #define PIXIS_BASE_PHYS 0xfffdf0000ull +#else +#define PIXIS_BASE_PHYS PIXIS_BASE +#endif #define CONFIG_SYS_BR2_PRELIM (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V) #define CONFIG_SYS_OR2_PRELIM (OR_AM_32KB | 0x6ff7) @@ -153,6 +170,8 @@ #define PIXIS_LBMAP_SWITCH 7 #define PIXIS_LBMAP_MASK 0xF0 #define PIXIS_LBMAP_ALTBANK 0x20 +#define PIXIS_ELBC_SPI_MASK 0xc0 +#define PIXIS_SPI 0x80 #define CONFIG_SYS_INIT_RAM_LOCK #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */ @@ -185,13 +204,14 @@ #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " /* Video */ -#undef CONFIG_FSL_DIU_FB +#define CONFIG_FSL_DIU_FB #ifdef CONFIG_FSL_DIU_FB #define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR + 0x10000) #define CONFIG_VIDEO #define CONFIG_CMD_BMP #define CONFIG_CFB_CONSOLE +#define CONFIG_VIDEO_SW_CURSOR #define CONFIG_VGA_AS_SINGLE_DEVICE #define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO @@ -203,6 +223,22 @@ #undef CONFIG_SYS_FLASH_EMPTY_INFO #endif +#ifndef CONFIG_FSL_DIU_FB +#define CONFIG_ATI +#endif + +#ifdef CONFIG_ATI +#define VIDEO_IO_OFFSET CONFIG_SYS_PCIE1_IO_VIRT +#define CONFIG_VIDEO +#define CONFIG_BIOSEMU +#define CONFIG_VIDEO_SW_CURSOR +#define CONFIG_ATI_RADEON_FB +#define CONFIG_VIDEO_LOGO +#define CONFIG_SYS_ISA_IO_BASE_ADDRESS VIDEO_IO_OFFSET +#define CONFIG_CFB_CONSOLE +#define CONFIG_VGA_AS_SINGLE_DEVICE +#endif + /* * Pass open firmware flat tree */ @@ -235,38 +271,78 @@ #define CONFIG_SYS_EEPROM_BUS_NUM 1 /* + * eSPI - Enhanced SPI + */ +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_SPANSION + +#define CONFIG_HARD_SPI +#define CONFIG_FSL_ESPI + +#define CONFIG_CMD_SF +#define CONFIG_SF_DEFAULT_SPEED 10000000 +#define CONFIG_SF_DEFAULT_MODE 0 + +/* * General PCI * Memory space is mapped 1-1, but I/O space must start from 0. */ /* controller 1, Slot 2, tgtid 1, Base address a000 */ #define CONFIG_SYS_PCIE1_MEM_VIRT 0xc0000000 +#ifdef CONFIG_PHYS_64BIT #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc40000000ull +#else +#define CONFIG_SYS_PCIE1_MEM_BUS 0xc0000000 +#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc0000000 +#endif #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ #define CONFIG_SYS_PCIE1_IO_VIRT 0xffc20000 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 +#ifdef CONFIG_PHYS_64BIT #define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc20000ull +#else +#define CONFIG_SYS_PCIE1_IO_PHYS 0xffc20000 +#endif #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ /* controller 2, direct to uli, tgtid 2, Base address 9000 */ #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 +#ifdef CONFIG_PHYS_64BIT #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull +#else +#define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 +#define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 +#endif #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ #define CONFIG_SYS_PCIE2_IO_VIRT 0xffc10000 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 +#ifdef CONFIG_PHYS_64BIT #define CONFIG_SYS_PCIE2_IO_PHYS 0xfffc10000ull +#else +#define CONFIG_SYS_PCIE2_IO_PHYS 0xffc10000 +#endif #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ /* controller 3, Slot 1, tgtid 3, Base address b000 */ #define CONFIG_SYS_PCIE3_MEM_VIRT 0x80000000 +#ifdef CONFIG_PHYS_64BIT #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc00000000ull +#else +#define CONFIG_SYS_PCIE3_MEM_BUS 0x80000000 +#define CONFIG_SYS_PCIE3_MEM_PHYS 0x80000000 +#endif #define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ #define CONFIG_SYS_PCIE3_IO_VIRT 0xffc00000 #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 +#ifdef CONFIG_PHYS_64BIT #define CONFIG_SYS_PCIE3_IO_PHYS 0xfffc00000ull +#else +#define CONFIG_SYS_PCIE3_IO_PHYS 0xffc00000 +#endif #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ #ifdef CONFIG_PCI @@ -401,11 +477,11 @@ /* * For booting Linux, the board info and command line data - * have to be in the first 16 MB of memory, since this is + * have to be in the first 64 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux*/ -#define CONFIG_SYS_BOOTM_LEN (16 << 20) /* Increase max gunzip size */ +#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/ +#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ #ifdef CONFIG_CMD_KGDB #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ @@ -448,8 +524,7 @@ "diuregs=md e002c000 1d\0" \ "dium=mw e002c01c\0" \ "diuerr=md e002c014 1\0" \ - "othbootargs=diufb=15M video=fslfb:1280x1024-32@60,monitor=0 tty0\0" \ - "monitor=0-DVI\0" + "hwconfig=esdhc;audclk:12\0" #define CONFIG_HDBOOT \ "setenv bootargs root=/dev/$bdev rw " \ diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h index 95b85e3..59f9755 100644 --- a/include/configs/P1_P2_RDB.h +++ b/include/configs/P1_P2_RDB.h @@ -30,6 +30,10 @@ #ifndef __CONFIG_H #define __CONFIG_H +#ifdef CONFIG_36BIT +#define CONFIG_PHYS_64BIT +#endif + #ifdef CONFIG_P1011RDB #define CONFIG_P1011 #endif @@ -50,20 +54,21 @@ #define CONFIG_SYS_TEXT_BASE_SPL 0xfff00000 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE_SPL /* start of monitor */ #else +#define CONFIG_SYS_LDSCRIPT $(TOPDIR)/$(CPUDIR)/u-boot-nand.lds #define CONFIG_SYS_TEXT_BASE 0xf8f82000 #endif /* CONFIG_NAND_SPL */ #endif #ifdef CONFIG_SDCARD #define CONFIG_RAMBOOT_SDCARD 1 -#define CONFIG_SYS_TEXT_BASE 0xf8f80000 -#define CONFIG_RESET_VECTOR_ADDRESS 0xf8fffffc +#define CONFIG_SYS_TEXT_BASE 0x11000000 +#define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc #endif #ifdef CONFIG_SPIFLASH #define CONFIG_RAMBOOT_SPIFLASH 1 -#define CONFIG_SYS_TEXT_BASE 0xf8f80000 -#define CONFIG_RESET_VECTOR_ADDRESS 0xf8fffffc +#define CONFIG_SYS_TEXT_BASE 0x11000000 +#define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc #endif #ifndef CONFIG_SYS_TEXT_BASE @@ -122,6 +127,11 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_ENABLE_36BIT_PHYS 1 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_ADDR_MAP 1 +#define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */ +#endif + #define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x1fffffff #define CONFIG_PANIC_HANG /* do not reset board on panic */ @@ -143,7 +153,11 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); * actual resources get mapped (not physical addresses) */ #define CONFIG_SYS_CCSRBAR 0xffe00000 /* relocated CCSRBAR */ -#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of */ +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_CCSRBAR_PHYS 0xfffe00000ull +#else +#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR +#endif /* CCSRBAR */ #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses */ /* CONFIG_SYS_IMMR */ @@ -196,13 +210,17 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); */ #define CONFIG_SYS_FLASH_BASE 0xef000000 /* start of FLASH 16M */ +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_FLASH_BASE_PHYS 0xfef000000ull +#else #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE +#endif #define CONFIG_FLASH_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ BR_PS_16 | BR_V) #define CONFIG_FLASH_OR_PRELIM 0xff000ff7 -#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE} +#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS} #define CONFIG_SYS_FLASH_QUIET_TEST #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ @@ -226,10 +244,23 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7 #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ +#define CONFIG_MISC_INIT_R #define CONFIG_HWCONFIG #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* stack in RAM */ +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR +/* The assembler doesn't like typecast */ +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ + ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ + CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) +#else +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS CONFIG_SYS_INIT_RAM_ADDR /* Initial L1 address */ +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS +#endif #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* Size of used area in RAM */ #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE \ @@ -241,10 +272,20 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #ifndef CONFIG_NAND_SPL #define CONFIG_SYS_NAND_BASE 0xffa00000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_NAND_BASE_PHYS 0xfffa00000ull #else -#define CONFIG_SYS_NAND_BASE 0xfff00000 +#define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE #endif +#else +#define CONFIG_SYS_NAND_BASE 0xfff00000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_NAND_BASE_PHYS 0xffff00000ull +#else #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE +#endif +#endif + #define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE} #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define NAND_MAX_CHIPS 1 @@ -263,13 +304,13 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_NAND_U_BOOT_RELOC_SP ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF) /* NAND flash config */ -#define CONFIG_NAND_BR_PRELIM (CONFIG_SYS_NAND_BASE_PHYS \ +#define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ | BR_PS_8 /* Port Size = 8 bit */ \ | BR_MS_FCM /* MSEL = FCM */ \ | BR_V) /* valid */ -#define CONFIG_NAND_OR_PRELIM (0xFFF80000 /* length 32K */ \ +#define CONFIG_SYS_NAND_OR_PRELIM (0xFFF80000 /* length 32K */ \ | OR_FCM_CSCT \ | OR_FCM_CST \ | OR_FCM_CHT \ @@ -278,22 +319,27 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); | OR_FCM_EHTR) #ifdef CONFIG_RAMBOOT_NAND -#define CONFIG_SYS_BR0_PRELIM CONFIG_NAND_BR_PRELIM /* NAND Base Address */ -#define CONFIG_SYS_OR0_PRELIM CONFIG_NAND_OR_PRELIM /* NAND Options */ +#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ +#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ #define CONFIG_SYS_BR1_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ #define CONFIG_SYS_OR1_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ #else #define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ #define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ -#define CONFIG_SYS_BR1_PRELIM CONFIG_NAND_BR_PRELIM /* NAND Base Address */ -#define CONFIG_SYS_OR1_PRELIM CONFIG_NAND_OR_PRELIM /* NAND Options */ +#define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ +#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ #endif #define CONFIG_SYS_VSC7385_BASE 0xffb00000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_VSC7385_BASE_PHYS 0xfffb00000ull +#else #define CONFIG_SYS_VSC7385_BASE_PHYS CONFIG_SYS_VSC7385_BASE +#endif -#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_VSC7385_BASE | BR_PS_8 | BR_V) +#define CONFIG_SYS_BR2_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_VSC7385_BASE) \ + | BR_PS_8 | BR_V) #define CONFIG_SYS_OR2_PRELIM (OR_AM_128KB | OR_GPCM_CSNT | OR_GPCM_XACS | \ OR_GPCM_SCY_15 | OR_GPCM_SETA | OR_GPCM_TRLX | \ OR_GPCM_EHTR | OR_GPCM_EAD) @@ -360,9 +406,20 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 #define CONFIG_SYS_EEPROM_BUS_NUM 1 +#define CONFIG_SYS_I2C_PCA9557_ADDR 0x18 + #define CONFIG_RTC_DS1337 #define CONFIG_SYS_RTC_DS1337_NOOSC #define CONFIG_SYS_I2C_RTC_ADDR 0x68 + +/* eSPI - Enhanced SPI */ +#define CONFIG_FSL_ESPI +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_SPANSION +#define CONFIG_CMD_SF +#define CONFIG_SF_DEFAULT_SPEED 10000000 +#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 + /* * General PCI * Memory space is mapped 1-1, but I/O space must start from 0. @@ -372,23 +429,41 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); /* controller 2, Slot 2, tgtid 2, Base address 9000 */ #define CONFIG_SYS_PCIE2_NAME "Slot 1" #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_PCIE2_MEM_BUS 0xc0000000 +#define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull +#else #define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 +#endif #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ #define CONFIG_SYS_PCIE2_IO_VIRT 0xffc10000 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_PCIE2_IO_PHYS 0xfffc10000ull +#else #define CONFIG_SYS_PCIE2_IO_PHYS 0xffc10000 +#endif #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ /* controller 1, Slot 1, tgtid 1, Base address a000 */ #define CONFIG_SYS_PCIE1_NAME "Slot 2" #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 +#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull +#else #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 #define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 +#endif #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ #define CONFIG_SYS_PCIE1_IO_VIRT 0xffc00000 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc00000ull +#else #define CONFIG_SYS_PCIE1_IO_PHYS 0xffc00000 +#endif #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ #define CONFIG_PCI_PNP /* do pci plug-and-play */ @@ -456,9 +531,18 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_ENV_IS_IN_NAND 1 #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE #define CONFIG_ENV_OFFSET ((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE) -#elif defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH) - #define CONFIG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ - #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) +#elif defined(CONFIG_RAMBOOT_SDCARD) +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_SYS_MMC_ENV_DEV 0 +#elif defined(CONFIG_RAMBOOT_SPIFLASH) + #define CONFIG_ENV_IS_IN_SPI_FLASH + #define CONFIG_ENV_SPI_BUS 0 + #define CONFIG_ENV_SPI_CS 0 + #define CONFIG_ENV_SPI_MAX_HZ 10000000 + #define CONFIG_ENV_SPI_MODE 0 + #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ + #define CONFIG_ENV_SECT_SIZE 0x10000 #define CONFIG_ENV_SIZE 0x2000 #endif #else @@ -546,11 +630,11 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); /* * For booting Linux, the board info and command line data - * have to be in the first 16 MB of memory, since this is + * have to be in the first 64 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CONFIG_SYS_BOOTMAPSZ (16 << 20)/* Initial Memory map for Linux*/ -#define CONFIG_SYS_BOOTM_LEN (16 << 20) /* Increase max gunzip size */ +#define CONFIG_SYS_BOOTMAPSZ (64 << 20)/* Initial Memory map for Linux*/ +#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ diff --git a/include/configs/P2020DS.h b/include/configs/P2020DS.h index b32a997..b5db0b3 100644 --- a/include/configs/P2020DS.h +++ b/include/configs/P2020DS.h @@ -33,6 +33,20 @@ #define CONFIG_PHYS_64BIT #endif +#ifdef CONFIG_SDCARD +#define CONFIG_SYS_RAMBOOT +#define CONFIG_SYS_EXTRA_ENV_RELOC +#define CONFIG_SYS_TEXT_BASE 0xf8f80000 +#define CONFIG_RESET_VECTOR_ADDRESS 0xf8fffffc +#endif + +#ifdef CONFIG_SPIFLASH +#define CONFIG_SYS_RAMBOOT +#define CONFIG_SYS_EXTRA_ENV_RELOC +#define CONFIG_SYS_TEXT_BASE 0xf8f80000 +#define CONFIG_RESET_VECTOR_ADDRESS 0xf8fffffc +#endif + /* High Level Configuration Options */ #define CONFIG_BOOKE 1 /* BOOKE */ #define CONFIG_E500 1 /* BOOKE e500 family */ @@ -78,6 +92,8 @@ #define CONFIG_L2_CACHE /* toggle L2 cache */ #define CONFIG_BTB /* toggle branch predition */ +#define CONFIG_BOARD_EARLY_INIT_F /* Call board_pre_init */ + #define CONFIG_ENABLE_36BIT_PHYS 1 #ifdef CONFIG_PHYS_64BIT @@ -91,6 +107,18 @@ #define CONFIG_PANIC_HANG /* do not reset board on panic */ /* + * Config the L2 Cache + */ +#define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_INIT_L2_ADDR_PHYS 0xff8f80000ull +#else +#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR +#endif +#define CONFIG_SYS_L2_SIZE (512 << 10) +#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) + +/* * Base addresses -- Note these are effective addresses where the * actual resources get mapped (not physical addresses) */ @@ -128,7 +156,7 @@ /* I2C addresses of SPD EEPROMs */ #define CONFIG_DDR_SPD #define CONFIG_SYS_SPD_BUS_NUM 0 /* SPD EEPROM located on I2C bus 0 */ -#define SPD_EEPROM_ADDRESS1 0x51 /* CTLR 0 DIMM 0 */ +#define SPD_EEPROM_ADDRESS 0x51 /* CTLR 0 DIMM 0 */ /* These are used when DDR doesn't use SPD. */ #define CONFIG_SYS_SDRAM_SIZE 1024 /* DDR is 1GB */ @@ -305,12 +333,12 @@ #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) /* NAND flash config */ -#define CONFIG_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ +#define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ | BR_PS_8 /* Port Size = 8bit */ \ | BR_MS_FCM /* MSEL = FCM */ \ | BR_V) /* valid */ -#define CONFIG_NAND_OR_PRELIM (0xFFFC0000 /* length 256K */ \ +#define CONFIG_SYS_NAND_OR_PRELIM (0xFFFC0000 /* length 256K */ \ | OR_FCM_PGS /* Large Page*/ \ | OR_FCM_CSCT \ | OR_FCM_CST \ @@ -321,28 +349,28 @@ #define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ #define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ -#define CONFIG_SYS_BR2_PRELIM CONFIG_NAND_BR_PRELIM /* NAND Base Address */ -#define CONFIG_SYS_OR2_PRELIM CONFIG_NAND_OR_PRELIM /* NAND Options */ +#define CONFIG_SYS_BR2_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ +#define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ #define CONFIG_SYS_BR4_PRELIM (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS + 0x40000))\ | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ | BR_PS_8 /* Port Size = 8bit */ \ | BR_MS_FCM /* MSEL = FCM */ \ | BR_V) /* valid */ -#define CONFIG_SYS_OR4_PRELIM CONFIG_NAND_OR_PRELIM /* NAND Options */ +#define CONFIG_SYS_OR4_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ #define CONFIG_SYS_BR5_PRELIM (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS + 0x80000))\ | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ | BR_PS_8 /* Port Size = 8bit */ \ | BR_MS_FCM /* MSEL = FCM */ \ | BR_V) /* valid */ -#define CONFIG_SYS_OR5_PRELIM CONFIG_NAND_OR_PRELIM /* NAND Options */ +#define CONFIG_SYS_OR5_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ #define CONFIG_SYS_BR6_PRELIM (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS + 0xc0000))\ | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ | BR_PS_8 /* Port Size = 8bit */ \ | BR_MS_FCM /* MSEL = FCM */ \ | BR_V) /* valid */ -#define CONFIG_SYS_OR6_PRELIM CONFIG_NAND_OR_PRELIM /* NAND Options */ +#define CONFIG_SYS_OR6_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ /* Serial Port - controlled on board with jumper J8 * open - index 2 @@ -397,6 +425,18 @@ #define CONFIG_SYS_EEPROM_BUS_NUM 0 /* + * eSPI - Enhanced SPI + */ +#define CONFIG_FSL_ESPI + +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_SPANSION + +#define CONFIG_CMD_SF +#define CONFIG_SF_DEFAULT_SPEED 10000000 +#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 + +/* * General PCI * Memory space is mapped 1-1, but I/O space must start from 0. */ @@ -569,6 +609,20 @@ /* * Environment */ +#if defined(CONFIG_SDCARD) +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_SYS_MMC_ENV_DEV 0 +#elif defined(CONFIG_SPIFLASH) +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_SPI_BUS 0 +#define CONFIG_ENV_SPI_CS 0 +#define CONFIG_ENV_SPI_MAX_HZ 10000000 +#define CONFIG_ENV_SPI_MODE 0 +#define CONFIG_ENV_SIZE 0x2000 /* 8KB */ +#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ +#define CONFIG_ENV_SECT_SIZE 0x10000 +#else #define CONFIG_ENV_IS_IN_FLASH 1 #if CONFIG_SYS_MONITOR_BASE > 0xfff80000 #define CONFIG_ENV_ADDR 0xfff80000 @@ -577,6 +631,7 @@ #endif #define CONFIG_ENV_SIZE 0x2000 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ +#endif #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ @@ -605,15 +660,36 @@ /* * USB */ +#define CONFIG_USB_EHCI + +#ifdef CONFIG_USB_EHCI #define CONFIG_CMD_USB #define CONFIG_USB_STORAGE -#define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET +#endif #undef CONFIG_WATCHDOG /* watchdog disabled */ /* + * SDHC/MMC + */ +#define CONFIG_MMC + +#ifdef CONFIG_MMC +#define CONFIG_FSL_ESDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR +#define CONFIG_CMD_MMC +#define CONFIG_GENERIC_MMC +#endif + +#if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI) +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION +#endif + +/* * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ @@ -633,11 +709,11 @@ /* * For booting Linux, the board info and command line data - * have to be in the first 16 MB of memory, since this is + * have to be in the first 64 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux*/ -#define CONFIG_SYS_BOOTM_LEN (16 << 20) /* Increase max gunzip size */ +#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/ +#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ @@ -651,13 +727,8 @@ /* The mac addresses for all ethernet interface */ #if defined(CONFIG_TSEC_ENET) #define CONFIG_HAS_ETH0 -#define CONFIG_ETHADDR 00:E0:0C:02:00:FD #define CONFIG_HAS_ETH1 -#define CONFIG_ETH1ADDR 00:E0:0C:02:01:FD #define CONFIG_HAS_ETH2 -#define CONFIG_ETH2ADDR 00:E0:0C:02:02:FD -#define CONFIG_HAS_ETH3 -#define CONFIG_ETH3ADDR 00:E0:0C:02:03:FD #endif #define CONFIG_IPADDR 192.168.1.254 @@ -680,8 +751,8 @@ #define CONFIG_BAUDRATE 115200 #define CONFIG_EXTRA_ENV_SETTINGS \ - "perf_mode=stable\0" \ - "memctl_intlv_ctl=2\0" \ + "perf_mode=performance\0" \ + "hwconfig=fsl_ddr:ctlr_intlv=bank,bank_intlv=cs0_cs1\0" \ "netdev=eth0\0" \ "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ "tftpflash=tftpboot $loadaddr $uboot; " \ @@ -690,18 +761,25 @@ "cp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize; " \ "protect on " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ "cmp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize\0" \ + "satabootcmd=setenv bootargs root=/dev/$bdev rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" \ "consoledev=ttyS0\0" \ "ramdiskaddr=2000000\0" \ "ramdiskfile=p2020ds/ramdisk.uboot\0" \ "fdtaddr=c00000\0" \ + "othbootargs=cache-sram-size=0x10000\0" \ "fdtfile=p2020ds/p2020ds.dtb\0" \ - "bdev=sda3\0" + "bdev=sda3\0" \ + "partition=scsi 0:0\0" #define CONFIG_HDBOOT \ "setenv bootargs root=/dev/$bdev rw " \ "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ + "ext2load $partition $loadaddr $bootfile;" \ + "ext2load $partition $fdtaddr $fdtfile;" \ "bootm $loadaddr - $fdtaddr" #define CONFIG_NFSBOOTCOMMAND \ diff --git a/include/configs/P3041DS.h b/include/configs/P3041DS.h new file mode 100644 index 0000000..46f91cc --- /dev/null +++ b/include/configs/P3041DS.h @@ -0,0 +1,37 @@ +/* + * Copyright 2010-2011 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * P3041 DS board configuration file + * + */ +#define CONFIG_P3041DS +#define CONFIG_PHYS_64BIT +#define CONFIG_PPC_P3041 + +#define CONFIG_FSL_SATA_V2 +#define CONFIG_PCIE4 + +#define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */ + +#include "corenet_ds.h" + diff --git a/include/configs/P5020DS.h b/include/configs/P5020DS.h new file mode 100644 index 0000000..6d279b3 --- /dev/null +++ b/include/configs/P5020DS.h @@ -0,0 +1,37 @@ +/* + * Copyright 2009-2011 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * P5020 DS board configuration file + * + */ +#define CONFIG_P5020DS +#define CONFIG_PHYS_64BIT +#define CONFIG_PPC_P5020 + +#define CONFIG_FSL_SATA_V2 +#define CONFIG_PCIE4 + +#define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */ + +#include "corenet_ds.h" + diff --git a/include/configs/a320evb.h b/include/configs/a320evb.h index 27f137f..0527822 100644 --- a/include/configs/a320evb.h +++ b/include/configs/a320evb.h @@ -32,6 +32,11 @@ #undef CONFIG_SKIP_LOWLEVEL_INIT /*----------------------------------------------------------------------- + * Power Management Unit + */ +#define CONFIG_FTPMU010_POWER + +/*----------------------------------------------------------------------- * Timer */ #define CONFIG_SYS_HZ 1000 /* timer ticks per second */ @@ -158,7 +163,8 @@ * Static memory controller configuration */ -#include <asm/arch/ftsmc020.h> +#define CONFIG_FTSMC020 +#include <faraday/ftsmc020.h> #define FTSMC020_BANK0_CONFIG (FTSMC020_BANK_ENABLE | \ FTSMC020_BANK_BASE(PHYS_FLASH_1) | \ diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h new file mode 100644 index 0000000..09cb951 --- /dev/null +++ b/include/configs/am3517_crane.h @@ -0,0 +1,332 @@ +/* + * am3517_crane.h - Default configuration for AM3517 CraneBoard. + * + * Author: Srinath.R <srinath@mistralsolutions.com> + * + * Based on include/configs/am3517evm.h + * + * Copyright (C) 2011 Mistral Solutions pvt Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ +#define CONFIG_ARMV7 1 /* This is an ARM V7 CPU core */ +#define CONFIG_OMAP 1 /* in a TI OMAP core */ +#define CONFIG_OMAP34XX 1 /* which is a 34XX */ +#define CONFIG_OMAP3_AM3517CRANE 1 /* working with CRANEBOARD */ + +#define CONFIG_EMIF4 /* The chip has EMIF4 controller */ + +#include <asm/arch/cpu.h> /* get chip and board defs */ +#include <asm/arch/omap3.h> + +/* + * Display CPU and Board information + */ +#define CONFIG_DISPLAY_CPUINFO 1 +#define CONFIG_DISPLAY_BOARDINFO 1 + +/* Clock Defines */ +#define V_OSCK 26000000 /* Clock output from T2 */ +#define V_SCLK (V_OSCK >> 1) + +#undef CONFIG_USE_IRQ /* no support for IRQs */ +#define CONFIG_MISC_INIT_R + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 +#define CONFIG_REVISION_TAG 1 + +/* + * Size of malloc() pool + */ +#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB sector */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) + /* initial data */ +/* + * DDR related + */ +#define CONFIG_OMAP3_MICRON_DDR 1 /* Micron DDR */ +#define CONFIG_SYS_CS0_SIZE (256 * 1024 * 1024) + +/* + * Hardware drivers + */ + +/* + * NS16550 Configuration + */ +#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ + +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK + +/* + * select serial console configuration + */ +#define CONFIG_CONS_INDEX 3 +#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 +#define CONFIG_SERIAL3 3 /* UART3 on CRANEBOARD */ + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ + 115200} +#define CONFIG_MMC 1 +#define CONFIG_OMAP3_MMC 1 +#define CONFIG_DOS_PARTITION 1 + +/* + * USB configuration + * Enable CONFIG_MUSB_HCD for Host functionalities MSC, keyboard + * Enable CONFIG_MUSB_UDC for Device functionalities. + */ +#define CONFIG_USB_AM35X 1 +#define CONFIG_MUSB_HCD 1 + +#ifdef CONFIG_USB_AM35X + +#ifdef CONFIG_MUSB_HCD +#define CONFIG_CMD_USB + +#define CONFIG_USB_STORAGE +#define CONGIG_CMD_STORAGE +#define CONFIG_CMD_FAT + +#ifdef CONFIG_USB_KEYBOARD +#define CONFIG_SYS_USB_EVENT_POLL +#define CONFIG_PREBOOT "usb start" +#endif /* CONFIG_USB_KEYBOARD */ + +#endif /* CONFIG_MUSB_HCD */ + +#ifdef CONFIG_MUSB_UDC +/* USB device configuration */ +#define CONFIG_USB_DEVICE 1 +#define CONFIG_USB_TTY 1 +#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 +/* Change these to suit your needs */ +#define CONFIG_USBD_VENDORID 0x0451 +#define CONFIG_USBD_PRODUCTID 0x5678 +#define CONFIG_USBD_MANUFACTURER "Texas Instruments" +#define CONFIG_USBD_PRODUCT_NAME "AM3517CRANE" +#endif /* CONFIG_MUSB_UDC */ + +#endif /* CONFIG_USB_AM35X */ + +/* commands to include */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_EXT2 /* EXT2 Support */ +#define CONFIG_CMD_FAT /* FAT support */ +#define CONFIG_CMD_JFFS2 /* JFFS2 Support */ + +#define CONFIG_CMD_I2C /* I2C serial bus support */ +#define CONFIG_CMD_MMC /* MMC support */ +#define CONFIG_CMD_NAND /* NAND support */ +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PING + +#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */ +#undef CONFIG_CMD_FPGA /* FPGA configuration Support */ +#undef CONFIG_CMD_IMI /* iminfo */ +#undef CONFIG_CMD_IMLS /* List all found images */ + +#define CONFIG_SYS_NO_FLASH +#define CONFIG_HARD_I2C 1 +#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_SYS_I2C_SLAVE 1 +#define CONFIG_SYS_I2C_BUS 0 +#define CONFIG_SYS_I2C_BUS_SELECT 1 +#define CONFIG_DRIVER_OMAP34XX_I2C 1 + +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_NFS +/* + * Board NAND Info. + */ +#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ + /* to access nand */ +#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ + /* to access */ + /* nand at CS0 */ + +#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of */ + /* NAND devices */ +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ + +#define CONFIG_JFFS2_NAND +/* nand device jffs2 lives on */ +#define CONFIG_JFFS2_DEV "nand0" +/* start of jffs2 partition */ +#define CONFIG_JFFS2_PART_OFFSET 0x680000 +#define CONFIG_JFFS2_PART_SIZE 0xf980000 /* sz of jffs2 part */ + +/* Environment information */ +#define CONFIG_BOOTDELAY 10 + +#define CONFIG_BOOTFILE uImage + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "loadaddr=0x82000000\0" \ + "console=ttyS2,115200n8\0" \ + "mmcargs=setenv bootargs console=${console} " \ + "root=/dev/mmcblk0p2 rw " \ + "rootfstype=ext3 rootwait\0" \ + "nandargs=setenv bootargs console=${console} " \ + "root=/dev/mtdblock4 rw " \ + "rootfstype=jffs2\0" \ + "loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \ + "bootscript=echo Running bootscript from mmc ...; " \ + "source ${loadaddr}\0" \ + "loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \ + "mmcboot=echo Booting from mmc ...; " \ + "run mmcargs; " \ + "bootm ${loadaddr}\0" \ + "nandboot=echo Booting from nand ...; " \ + "run nandargs; " \ + "nand read ${loadaddr} 280000 400000; " \ + "bootm ${loadaddr}\0" \ + +#define CONFIG_BOOTCOMMAND \ + "if mmc init; then " \ + "if run loadbootscript; then " \ + "run bootscript; " \ + "else " \ + "if run loaduimage; then " \ + "run mmcboot; " \ + "else run nandboot; " \ + "fi; " \ + "fi; " \ + "else run nandboot; fi" + +#define CONFIG_AUTO_COMPLETE 1 +/* + * Miscellaneous configurable options + */ +#define V_PROMPT "AM3517_CRANE # " + +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_PROMPT V_PROMPT +#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 32 /* max number of command */ + /* args */ +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) +/* memtest works on */ +#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) +#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \ + 0x01F00000) /* 31MB */ + +#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load */ + /* address */ + +/* + * AM3517 has 12 GP timers, they can be driven by the system clock + * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). + * This rate is divided by a local divisor. + */ +#define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2 +#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ +#define CONFIG_SYS_HZ 1000 + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */ +#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */ +#endif + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ +#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 +#define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 MiB */ +#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 + +/* SDRAM Bank Allocation method */ +#define SDRC_R_B_C 1 + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ + +/* **** PISMO SUPPORT *** */ + +/* Configure the PISMO */ +#define PISMO1_NAND_SIZE GPMC_SIZE_128M +#define PISMO1_ONEN_SIZE GPMC_SIZE_128M + +#define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors */ + /* on one chip */ +#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */ +#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ + +#define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE + +/* Monitor at start of flash */ +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE + +#define CONFIG_NAND_OMAP_GPMC +#define GPMC_NAND_ECC_LP_x16_LAYOUT 1 +#define CONFIG_ENV_IS_IN_NAND 1 +#define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ + +#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB sector */ +#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET +#define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET + +/*----------------------------------------------------------------------- + * CFI FLASH driver setup + */ +/* timeout values are in ticks */ +#define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ) +#define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ) + +/* Flash banks JFFS2 should use */ +#define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \ + CONFIG_SYS_MAX_NAND_DEVICE) +#define CONFIG_SYS_JFFS2_MEM_NAND +/* use flash_info[2] */ +#define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS +#define CONFIG_SYS_JFFS2_NUM_BANKS 1 + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 +#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 +#define CONFIG_SYS_INIT_RAM_SIZE 0x800 +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) +#endif /* __CONFIG_H */ diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h index 70e8f07..f5d5821 100644 --- a/include/configs/am3517_evm.h +++ b/include/configs/am3517_evm.h @@ -294,7 +294,9 @@ #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */ #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ -#define CONFIG_SYS_FLASH_BASE boot_flash_base +#if defined(CONFIG_CMD_NAND) +#define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE +#endif /* Monitor at start of flash */ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE @@ -304,9 +306,9 @@ #define CONFIG_ENV_IS_IN_NAND 1 #define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ -#define CONFIG_SYS_ENV_SECT_SIZE boot_flash_sec -#define CONFIG_ENV_OFFSET boot_flash_off -#define CONFIG_ENV_ADDR boot_flash_env_addr +#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ +#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET +#define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET /*----------------------------------------------------------------------- * CFI FLASH driver setup @@ -323,14 +325,6 @@ #define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS #define CONFIG_SYS_JFFS2_NUM_BANKS 1 -#ifndef __ASSEMBLY__ -extern unsigned int boot_flash_base; -extern volatile unsigned int boot_flash_env_addr; -extern unsigned int boot_flash_off; -extern unsigned int boot_flash_sec; -extern unsigned int boot_flash_type; -#endif - #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 #define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 #define CONFIG_SYS_INIT_RAM_SIZE 0x800 diff --git a/include/configs/aspenite.h b/include/configs/aspenite.h index fd35f3e..1619db5 100644 --- a/include/configs/aspenite.h +++ b/include/configs/aspenite.h @@ -52,6 +52,7 @@ */ #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ #include <config_cmd_default.h> +#define CONFIG_CMD_I2C #define CONFIG_CMD_AUTOSCRIPT #undef CONFIG_CMD_NET #undef CONFIG_CMD_NFS diff --git a/include/configs/bct-brettl2.h b/include/configs/bct-brettl2.h index fa72c7f..a55e178 100644 --- a/include/configs/bct-brettl2.h +++ b/include/configs/bct-brettl2.h @@ -11,7 +11,8 @@ /* * Processor Settings */ -#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS +#define CONFIG_BFIN_CPU bf536-0.3 +#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS /* diff --git a/include/configs/bf506f-ezkit.h b/include/configs/bf506f-ezkit.h new file mode 100644 index 0000000..77b6735 --- /dev/null +++ b/include/configs/bf506f-ezkit.h @@ -0,0 +1,105 @@ +/* + * U-boot - Configuration file for BF506F EZ-Kit board + */ + +#ifndef __CONFIG_BF506F_EZKIT_H__ +#define __CONFIG_BF506F_EZKIT_H__ + +#include <asm/config-pre.h> + + +/* + * Processor Settings + */ +#define CONFIG_BFIN_CPU bf506-0.0 +#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_PARA + + +/* + * Clock Settings + * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV + * SCLK = (CLKIN * VCO_MULT) / SCLK_DIV + */ +/* CONFIG_CLKIN_HZ is any value in Hz */ +#define CONFIG_CLKIN_HZ 25000000 +/* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */ +/* 1 = CLKIN / 2 */ +#define CONFIG_CLKIN_HALF 0 +/* PLL_BYPASS controls the BYPASS bit in PLL_CTL 0 = do not bypass */ +/* 1 = bypass PLL */ +#define CONFIG_PLL_BYPASS 0 +/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */ +/* Values can range from 0-63 (where 0 means 64) */ +#define CONFIG_VCO_MULT 16 +/* CCLK_DIV controls the core clock divider */ +/* Values can be 1, 2, 4, or 8 ONLY */ +#define CONFIG_CCLK_DIV 1 +/* SCLK_DIV controls the system clock divider */ +/* Values can range from 1-15 */ +#define CONFIG_SCLK_DIV 5 + + +/* + * Memory Settings + */ +#define CONFIG_MEM_SIZE 0 + +#define CONFIG_EBIU_AMGCTL_VAL (AMCKEN | AMBEN_ALL) +#define CONFIG_EBIU_AMBCTL0_VAL 0xffc2ffc2 +#define CONFIG_EBIU_AMBCTL1_VAL 0xffc2ffc2 + +#define CONFIG_SYS_MONITOR_BASE (L1_DATA_A_SRAM_END) +#define CONFIG_SYS_MONITOR_LEN (4 * 1024) +#define CONFIG_SYS_MALLOC_LEN (4 * 1024) + + +/* + * Flash Settings + */ +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_BASE 0x20000000 +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_SYS_MAX_FLASH_BANKS 1 +#define CONFIG_SYS_MAX_FLASH_SECT 71 +#define CONFIG_CMD_FLASH +#define CONFIG_MONITOR_IS_IN_RAM + + +/* + * SPI Settings + */ +#define CONFIG_BFIN_SPI +#define CONFIG_ENV_SPI_MAX_HZ 30000000 +#define CONFIG_SF_DEFAULT_SPEED 30000000 +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_STMICRO +#define CONFIG_CMD_SF +#define CONFIG_CMD_SPI + + +/* + * Env Storage Settings + */ +#define CONFIG_ENV_IS_NOWHERE +#define CONFIG_ENV_SIZE 0x400 +#undef CONFIG_CMD_EXPORTENV +#undef CONFIG_CMD_IMPORTENV + + +/* + * Misc Settings + */ +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_ICACHE_OFF +#define CONFIG_DCACHE_OFF +#define CONFIG_UART_CONSOLE 0 +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_CMD_MEMORY +#undef CONFIG_GZIP +#undef CONFIG_ZLIB +#undef CONFIG_CMD_BOOTM +#undef CONFIG_BOOTM_RTEMS +#undef CONFIG_BOOTM_LINUX + +#endif diff --git a/include/configs/bf518f-ezbrd.h b/include/configs/bf518f-ezbrd.h index 64ca9ed..6eec1c9 100644 --- a/include/configs/bf518f-ezbrd.h +++ b/include/configs/bf518f-ezbrd.h @@ -11,6 +11,7 @@ /* * Processor Settings */ +#define CONFIG_BFIN_CPU bf518-0.0 #define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_PARA diff --git a/include/configs/bf525-ucr2.h b/include/configs/bf525-ucr2.h new file mode 100644 index 0000000..1f65130 --- /dev/null +++ b/include/configs/bf525-ucr2.h @@ -0,0 +1,102 @@ +/* + * U-boot - Configuration file for bf525-ucr2 board + * The board includes ADSP-BF525 rev. 0.2, + * 32-bit SDRAM (SAMSUNG K4S561632H-UC75), + * USB 2.0 High Speed OTG USB WIFI, + * SPI flash (cFeon EN25Q128 16 MB), + * Support PPI and ITU-R656, + * See http://www.ucrobotics.com/?q=cn/ucr2 + */ + +#ifndef __CONFIG_BF525_UCR2_H__ +#define __CONFIG_BF525_UCR2_H__ + +#include <asm/config-pre.h> + +/* + * Processor Settings + */ +#define CONFIG_BFIN_CPU bf525-0.2 +#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_SPI_MASTER + +/* + * Clock Settings + * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV + * SCLK = (CLKIN * VCO_MULT) / SCLK_DIV + */ +/* CONFIG_CLKIN_HZ is any value in Hz */ +#define CONFIG_CLKIN_HZ 24000000 +/* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */ +/* 1 = CLKIN / 2 */ +#define CONFIG_CLKIN_HALF 0 +/* PLL_BYPASS controls the BYPASS bit in PLL_CTL 0 = do not bypass */ +/* 1 = bypass PLL */ +#define CONFIG_PLL_BYPASS 0 +/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */ +/* Values can range from 0-63 (where 0 means 64) */ +#define CONFIG_VCO_MULT 20 +/* CCLK_DIV controls the core clock divider */ +/* Values can be 1, 2, 4, or 8 ONLY */ +#define CONFIG_CCLK_DIV 1 +/* SCLK_DIV controls the system clock divider */ +/* Values can range from 1-15 */ +#define CONFIG_SCLK_DIV 4 + +/* + * Memory Settings + */ +#define CONFIG_MEM_ADD_WDTH 9 +#define CONFIG_MEM_SIZE 32 + +/* + * SDRAM reference page + * http://docs.blackfin.uclinux.org/doku.php?id=bfin:sdram + */ +#define CONFIG_EBIU_SDRRC_VAL 0x3f8 +#define CONFIG_EBIU_SDGCTL_VAL 0x9111cd + +#define CONFIG_EBIU_AMGCTL_VAL (AMBEN_ALL) +#define CONFIG_EBIU_AMBCTL0_VAL (B1WAT_7 | B1RAT_11 | B1HT_2 | B1ST_3 | B0WAT_7 | B0RAT_11 | B0HT_2 | B0ST_3) +#define CONFIG_EBIU_AMBCTL1_VAL (B3WAT_7 | B3RAT_11 | B3HT_2 | B3ST_3 | B2WAT_7 | B2RAT_11 | B2HT_2 | B2ST_3) + +#define CONFIG_SYS_MONITOR_LEN (320 * 1024) +#define CONFIG_SYS_MALLOC_LEN (320 * 1024) + +/* We don't have a parallel flash chip */ +#define CONFIG_SYS_NO_FLASH + +/* support for serial flash */ +#define CONFIG_BFIN_SPI +#define CONFIG_SPI_FLASH +#define CONFIG_CMD_SF +#define CONFIG_SF_DEFAULT_HZ 30000000 +#define CONFIG_SPI_FLASH_EON + +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_SPI_MAX_HZ 30000000 +#define CONFIG_ENV_OFFSET 0x10000 +#define CONFIG_ENV_SIZE 0x10000 +#define CONFIG_ENV_SECT_SIZE 0x10000 +#define CONFIG_ENV_OVERWRITE 1 + +/* + * Misc Settings + */ +#define CONFIG_UART_CONSOLE 0 + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_BOOTARGS "root=/dev/mtdblock0 rw" +#define CONFIG_BOOTCOMMAND "run sfboot" +#define CONFIG_BOOTDELAY 5 +#define CONFIG_EXTRA_ENV_SETTINGS \ + "sfboot=sf probe 1;" \ + "sf read 0x1000000 0x20000 0x300000;" \ + "bootm 0x1000000\0" + +/* this sets up the default list of enabled commands */ +#include <config_cmd_default.h> +#undef CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ +#undef CONFIG_CMD_NFS +#undef CONFIG_CMD_IMLS + +#endif diff --git a/include/configs/bf526-ezbrd.h b/include/configs/bf526-ezbrd.h index 4c30c25..c28f867 100644 --- a/include/configs/bf526-ezbrd.h +++ b/include/configs/bf526-ezbrd.h @@ -11,6 +11,7 @@ /* * Processor Settings */ +#define CONFIG_BFIN_CPU bf526-0.0 #define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_PARA diff --git a/include/configs/bf527-ad7160-eval.h b/include/configs/bf527-ad7160-eval.h index 14ade1b..9c35f2d 100644 --- a/include/configs/bf527-ad7160-eval.h +++ b/include/configs/bf527-ad7160-eval.h @@ -11,6 +11,7 @@ /* * Processor Settings */ +#define CONFIG_BFIN_CPU bf527-0.2 #define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_SPI_MASTER @@ -127,9 +128,8 @@ * SPI_MMC Settings */ #define CONFIG_MMC -#define CONFIG_CMD_EXT2 -#define CONFIG_SPI_MMC -#define CONFIG_SPI_MMC_DEFAULT_CS (MAX_CTRL_CS + GPIO_PH3) +#define CONFIG_GENERIC_MMC +#define CONFIG_MMC_SPI /* diff --git a/include/configs/bf527-ezkit.h b/include/configs/bf527-ezkit.h index fa9053b..22a5639 100644 --- a/include/configs/bf527-ezkit.h +++ b/include/configs/bf527-ezkit.h @@ -11,6 +11,7 @@ /* * Processor Settings */ +#define CONFIG_BFIN_CPU bf527-0.0 #define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_PARA diff --git a/include/configs/bf527-sdp.h b/include/configs/bf527-sdp.h index 3582846..c0e8b5a 100644 --- a/include/configs/bf527-sdp.h +++ b/include/configs/bf527-sdp.h @@ -11,6 +11,7 @@ /* * Processor Settings */ +#define CONFIG_BFIN_CPU bf527-0.2 #define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_PARA diff --git a/include/configs/bf533-ezkit.h b/include/configs/bf533-ezkit.h index e1bb594..95d3afa 100644 --- a/include/configs/bf533-ezkit.h +++ b/include/configs/bf533-ezkit.h @@ -11,6 +11,7 @@ /* * Processor Settings */ +#define CONFIG_BFIN_CPU bf533-0.3 #define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS diff --git a/include/configs/bf533-stamp.h b/include/configs/bf533-stamp.h index bf0f063..cb37ee7 100644 --- a/include/configs/bf533-stamp.h +++ b/include/configs/bf533-stamp.h @@ -11,6 +11,7 @@ /* * Processor Settings */ +#define CONFIG_BFIN_CPU bf533-0.3 #define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS diff --git a/include/configs/bf537-minotaur.h b/include/configs/bf537-minotaur.h index 0ba29bc..11929c7 100644 --- a/include/configs/bf537-minotaur.h +++ b/include/configs/bf537-minotaur.h @@ -24,6 +24,7 @@ /* * Processor Settings */ +#define CONFIG_BFIN_CPU bf537-0.2 #define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_SPI_MASTER @@ -155,6 +156,7 @@ # define CONFIG_CMD_PING #else # undef CONFIG_CMD_NET +# undef CONFIG_CMD_NFS #endif #define CONFIG_CMD_BOOTLDR diff --git a/include/configs/bf537-pnav.h b/include/configs/bf537-pnav.h index da4f2f2..0913ce4 100644 --- a/include/configs/bf537-pnav.h +++ b/include/configs/bf537-pnav.h @@ -11,6 +11,7 @@ /* * Processor Settings */ +#define CONFIG_BFIN_CPU bf537-0.2 #define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_SPI_MASTER diff --git a/include/configs/bf537-srv1.h b/include/configs/bf537-srv1.h index 559428f..e8024d7 100644 --- a/include/configs/bf537-srv1.h +++ b/include/configs/bf537-srv1.h @@ -24,6 +24,7 @@ /* * Processor Settings */ +#define CONFIG_BFIN_CPU bf537-0.2 #define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_SPI_MASTER @@ -155,6 +156,7 @@ # define CONFIG_CMD_PING #else # undef CONFIG_CMD_NET +# undef CONFIG_CMD_NFS #endif #define CONFIG_CMD_BOOTLDR diff --git a/include/configs/bf537-stamp.h b/include/configs/bf537-stamp.h index 2d1930c..c31e914 100644 --- a/include/configs/bf537-stamp.h +++ b/include/configs/bf537-stamp.h @@ -11,6 +11,7 @@ /* * Processor Settings */ +#define CONFIG_BFIN_CPU bf537-0.2 #define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS @@ -136,7 +137,8 @@ * SPI_MMC Settings */ #define CONFIG_MMC -#define CONFIG_SPI_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_MMC_SPI /* diff --git a/include/configs/bf538f-ezkit.h b/include/configs/bf538f-ezkit.h index 2469c6a..717a35a 100644 --- a/include/configs/bf538f-ezkit.h +++ b/include/configs/bf538f-ezkit.h @@ -11,6 +11,7 @@ /* * Processor Settings */ +#define CONFIG_BFIN_CPU bf538-0.4 #define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS diff --git a/include/configs/bf548-ezkit.h b/include/configs/bf548-ezkit.h index 1c035cf..4d7d877 100644 --- a/include/configs/bf548-ezkit.h +++ b/include/configs/bf548-ezkit.h @@ -11,6 +11,7 @@ /* * Processor Settings */ +#define CONFIG_BFIN_CPU bf548-0.0 #define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_PARA @@ -109,7 +110,7 @@ #define CONFIG_ENV_IS_EMBEDDED_IN_LDR #elif (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_NAND) #define CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_OFFSET 0x40000 +#define CONFIG_ENV_OFFSET 0x60000 #define CONFIG_ENV_SIZE 0x20000 #else #define CONFIG_ENV_IS_IN_FLASH 1 diff --git a/include/configs/bf561-acvilon.h b/include/configs/bf561-acvilon.h index 2b12c3f..1490b2f 100644 --- a/include/configs/bf561-acvilon.h +++ b/include/configs/bf561-acvilon.h @@ -12,7 +12,8 @@ /* * Processor Settings */ -#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS +#define CONFIG_BFIN_CPU bf561-0.5 +#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS /* diff --git a/include/configs/bf561-ezkit.h b/include/configs/bf561-ezkit.h index 7b020e6..33c7e18 100644 --- a/include/configs/bf561-ezkit.h +++ b/include/configs/bf561-ezkit.h @@ -11,6 +11,7 @@ /* * Processor Settings */ +#define CONFIG_BFIN_CPU bf561-0.3 #define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS @@ -79,8 +80,8 @@ #define CONFIG_SYS_MAX_FLASH_SECT 135 /* The BF561-EZKIT uses a top boot flash */ #define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR 0x20004000 -#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE) +#define CONFIG_ENV_OFFSET 0x4000 +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET) #define CONFIG_ENV_SIZE 0x2000 #define CONFIG_ENV_SECT_SIZE 0x10000 #if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS) diff --git a/include/configs/bfin_adi_common.h b/include/configs/bfin_adi_common.h index 03c6433..3312681 100644 --- a/include/configs/bfin_adi_common.h +++ b/include/configs/bfin_adi_common.h @@ -34,10 +34,14 @@ # define CONFIG_DOS_PARTITION # endif # ifdef CONFIG_MMC +# define CONFIG_CMD_EXT2 # define CONFIG_CMD_FAT # define CONFIG_CMD_MMC # define CONFIG_DOS_PARTITION # endif +# ifdef CONFIG_MMC_SPI +# define CONFIG_CMD_MMC_SPI +# endif # ifdef CONFIG_USB # define CONFIG_CMD_EXT2 # define CONFIG_CMD_FAT @@ -85,9 +89,9 @@ # define CONFIG_CMD_CACHE # define CONFIG_CMD_CPLBINFO # define CONFIG_CMD_ELF -# define CONFIG_ELF_SIMPLE_LOAD # define CONFIG_CMD_GPIO # define CONFIG_CMD_KGDB +# define CONFIG_CMD_LDRINFO # define CONFIG_CMD_REGINFO # define CONFIG_CMD_STRINGS # if defined(__ADSPBF51x__) || defined(__ADSPBF52x__) || defined(__ADSPBF54x__) @@ -273,6 +277,7 @@ */ #ifdef CONFIG_SPI_FLASH_ALL # define CONFIG_SPI_FLASH_ATMEL +# define CONFIG_SPI_FLASH_EON # define CONFIG_SPI_FLASH_MACRONIX # define CONFIG_SPI_FLASH_SPANSION # define CONFIG_SPI_FLASH_SST @@ -300,5 +305,6 @@ #endif #define CONFIG_BFIN_SPI_GPIO_CS /* Only matters if BFIN_SPI is enabled */ #define CONFIG_LZMA +#define CONFIG_MONITOR_IS_IN_RAM #endif diff --git a/include/configs/blackstamp.h b/include/configs/blackstamp.h index 3f5c959..85f08ea 100644 --- a/include/configs/blackstamp.h +++ b/include/configs/blackstamp.h @@ -24,6 +24,7 @@ /* CPU Options * Be sure to set the Silicon Revision Correctly */ +#define CONFIG_BFIN_CPU bf532-0.5 #define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_SPI_MASTER /* diff --git a/include/configs/blackvme.h b/include/configs/blackvme.h index e4688a2..9950e44 100644 --- a/include/configs/blackvme.h +++ b/include/configs/blackvme.h @@ -23,7 +23,8 @@ #define CONFIG_PANIC_HANG 0 /* CPU Options */ -#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_SPI_MASTER +#define CONFIG_BFIN_CPU bf561-0.5 +#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_SPI_MASTER /* * CLOCK SETTINGS CAVEAT diff --git a/include/configs/ca9x4_ct_vxp.h b/include/configs/ca9x4_ct_vxp.h index 63f003d..7f83249 100644 --- a/include/configs/ca9x4_ct_vxp.h +++ b/include/configs/ca9x4_ct_vxp.h @@ -30,6 +30,7 @@ /* Board info register */ #define SYS_ID 0x10000000 #define CONFIG_REVISION_TAG 1 +#define CONFIG_SYS_TEXT_BASE 0x60800000 /* High Level Configuration Options */ #define CONFIG_ARMV7 1 @@ -43,6 +44,8 @@ #define CONFIG_L2_OFF 1 #define CONFIG_INITRD_TAG 1 +#define CONFIG_OF_LIBFDT 1 + /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024) @@ -86,6 +89,10 @@ #define CONFIG_MMC 1 #define CONFIG_CMD_MMC #define CONFIG_GENERIC_MMC +#define CONFIG_ARM_PL180_MMCI +#define CONFIG_ARM_PL180_MMCI_BASE 0x10005000 +#define CONFIG_SYS_MMC_MAX_BLK_COUNT 127 +#define CONFIG_ARM_PL180_MMCI_CLOCK_FREQ 6250000 /* BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE diff --git a/include/configs/cm-bf527.h b/include/configs/cm-bf527.h index 84c9309..e0c6d53 100644 --- a/include/configs/cm-bf527.h +++ b/include/configs/cm-bf527.h @@ -11,6 +11,7 @@ /* * Processor Settings */ +#define CONFIG_BFIN_CPU bf527-0.0 #define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_PARA diff --git a/include/configs/cm-bf533.h b/include/configs/cm-bf533.h index dbc4a5b..7515296 100644 --- a/include/configs/cm-bf533.h +++ b/include/configs/cm-bf533.h @@ -11,6 +11,7 @@ /* * Processor Settings */ +#define CONFIG_BFIN_CPU bf533-0.3 #define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS diff --git a/include/configs/cm-bf537e.h b/include/configs/cm-bf537e.h index c3de96a..934b74b 100644 --- a/include/configs/cm-bf537e.h +++ b/include/configs/cm-bf537e.h @@ -11,6 +11,7 @@ /* * Processor Settings */ +#define CONFIG_BFIN_CPU bf537-0.2 #define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS diff --git a/include/configs/cm-bf537u.h b/include/configs/cm-bf537u.h index e60ebf2..c274c20 100644 --- a/include/configs/cm-bf537u.h +++ b/include/configs/cm-bf537u.h @@ -11,6 +11,7 @@ /* * Processor Settings */ +#define CONFIG_BFIN_CPU bf537-0.2 #define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS diff --git a/include/configs/cm-bf548.h b/include/configs/cm-bf548.h index 27b1cc5..fa62a8e 100644 --- a/include/configs/cm-bf548.h +++ b/include/configs/cm-bf548.h @@ -11,6 +11,7 @@ /* * Processor Settings */ +#define CONFIG_BFIN_CPU bf548-0.0 #define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_PARA diff --git a/include/configs/cm-bf561.h b/include/configs/cm-bf561.h index 8c350bc..c60401c 100644 --- a/include/configs/cm-bf561.h +++ b/include/configs/cm-bf561.h @@ -11,6 +11,7 @@ /* * Processor Settings */ +#define CONFIG_BFIN_CPU bf561-0.3 #define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_PARA diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h index 510c6d4..e07e8b3 100644 --- a/include/configs/cm_t35.h +++ b/include/configs/cm_t35.h @@ -1,7 +1,8 @@ /* - * (C) Copyright 2010 + * (C) Copyright 2011 * CompuLab, Ltd. * Mike Rapoport <mike@compulab.co.il> + * Igor Grinberg <grinberg@compulab.co.il> * * Based on omap3_beagle.h * (C) Copyright 2006-2008 @@ -9,7 +10,7 @@ * Richard Woodruff <r-woodruff2@ti.com> * Syed Mohammed Khasim <x0khasim@ti.com> * - * Configuration settings for the CompuLab CM-T35 board + * Configuration settings for the CompuLab CM-T35 and CM-T3730 boards * * See file CREDITS for list of people who contributed to this * project. @@ -26,8 +27,7 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Foundation, Inc. */ #ifndef __CONFIG_H @@ -40,7 +40,7 @@ #define CONFIG_OMAP 1 /* in a TI OMAP core */ #define CONFIG_OMAP34XX 1 /* which is a 34XX */ #define CONFIG_OMAP3430 1 /* which is in a 3430 */ -#define CONFIG_CM_T35 1 /* working with CM-T35 */ +#define CONFIG_CM_T3X 1 /* working with CM-T35 and CM-T3730 */ #define CONFIG_SYS_TEXT_BASE 0x80008000 @@ -110,9 +110,8 @@ #define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ 115200} -#define CONFIG_GENERIC_MMC 1 #define CONFIG_MMC 1 -#define CONFIG_OMAP_HSMMC 1 +#define CONFIG_OMAP3_MMC 1 #define CONFIG_DOS_PARTITION 1 /* DDR - I use Micron DDR */ @@ -244,14 +243,17 @@ "fi; " \ "else run nandboot; fi" -#define CONFIG_AUTO_COMPLETE 1 /* * Miscellaneous configurable options */ +#define CONFIG_AUTO_COMPLETE +#define CONFIG_CMDLINE_EDITING +#define CONFIG_TIMESTAMP +#define CONFIG_SYS_AUTOLOAD "no" #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#define CONFIG_SYS_PROMPT "CM-T35 # " +#define CONFIG_SYS_PROMPT "CM-T3x # " #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ @@ -310,7 +312,9 @@ #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ -#define CONFIG_SYS_FLASH_BASE boot_flash_base +#if defined(CONFIG_CMD_NAND) +#define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE +#endif /* Monitor at start of flash */ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE @@ -320,25 +324,17 @@ #define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */ #define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ -#define CONFIG_SYS_ENV_SECT_SIZE boot_flash_sec -#define CONFIG_ENV_OFFSET boot_flash_off +#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ +#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET #define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET -#ifndef __ASSEMBLY__ -extern unsigned int boot_flash_base; -extern volatile unsigned int boot_flash_env_addr; -extern unsigned int boot_flash_off; -extern unsigned int boot_flash_sec; -extern unsigned int boot_flash_type; -#endif - #if defined(CONFIG_CMD_NET) #define CONFIG_NET_MULTI #define CONFIG_SMC911X #define CONFIG_SMC911X_32_BIT -#define CM_T35_SMC911X_BASE 0x2C000000 -#define SB_T35_SMC911X_BASE (CM_T35_SMC911X_BASE + (16 << 20)) -#define CONFIG_SMC911X_BASE CM_T35_SMC911X_BASE +#define CM_T3X_SMC911X_BASE 0x2C000000 +#define SB_T35_SMC911X_BASE (CM_T3X_SMC911X_BASE + (16 << 20)) +#define CONFIG_SMC911X_BASE CM_T3X_SMC911X_BASE #endif /* (CONFIG_CMD_NET) */ /* additions for new relocation code, must be added to all boards */ @@ -349,4 +345,19 @@ extern unsigned int boot_flash_type; CONFIG_SYS_INIT_RAM_SIZE - \ GENERATED_GBL_DATA_SIZE) +/* Status LED */ +#define CONFIG_STATUS_LED 1 /* Status LED enabled */ +#define CONFIG_BOARD_SPECIFIC_LED 1 +#define STATUS_LED_GREEN 0 +#define STATUS_LED_BIT STATUS_LED_GREEN +#define STATUS_LED_STATE STATUS_LED_ON +#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) +#define STATUS_LED_BOOT STATUS_LED_BIT +#define GREEN_LED_GPIO 186 /* CM-T35 Green LED is GPIO186 */ + +/* GPIO banks */ +#ifdef CONFIG_STATUS_LED +#define CONFIG_OMAP3_GPIO_6 1 /* GPIO186 is in GPIO bank 6 */ +#endif + #endif /* __CONFIG_H */ diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h index bff212e..d1cda15 100644 --- a/include/configs/corenet_ds.h +++ b/include/configs/corenet_ds.h @@ -28,6 +28,11 @@ #include "../board/freescale/common/ics307_clk.h" +#ifdef CONFIG_RAMBOOT_PBL +#define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE +#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc +#endif + /* High Level Configuration Options */ #define CONFIG_BOOKE #define CONFIG_E500 /* BOOKE e500 family */ @@ -63,12 +68,17 @@ #define CONFIG_ENV_OVERWRITE +#if defined(CONFIG_RAMBOOT_PBL) + #define CONFIG_SYS_NO_FLASH /* Store ENV in memory only */ +#endif + #ifdef CONFIG_SYS_NO_FLASH #define CONFIG_ENV_IS_NOWHERE #else #define CONFIG_ENV_IS_IN_FLASH #define CONFIG_FLASH_CFI_DRIVER #define CONFIG_SYS_FLASH_CFI +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) #endif #define CONFIG_SYS_CLK_FREQ get_board_sys_clk() /* sysclk for MPC85xx */ @@ -100,6 +110,18 @@ #define CONFIG_PANIC_HANG /* do not reset board on panic */ /* + * Config the L3 Cache as L3 SRAM + */ +#define CONFIG_SYS_INIT_L3_ADDR CONFIG_RAMBOOT_TEXT_BASE +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_INIT_L3_ADDR_PHYS (0xf00000000ull | CONFIG_RAMBOOT_TEXT_BASE) +#else +#define CONFIG_SYS_INIT_L3_ADDR_PHYS CONFIG_SYS_INIT_L3_ADDR +#endif +#define CONFIG_SYS_L3_SIZE (1024 << 10) +#define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE) + +/* * Base addresses -- Note these are effective addresses where the * actual resources get mapped (not physical addresses) */ @@ -140,6 +162,7 @@ #define CONFIG_SYS_SPD_BUS_NUM 1 #define SPD_EEPROM_ADDRESS1 0x51 #define SPD_EEPROM_ADDRESS2 0x52 +#define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 /* for p3041/p5010 */ #define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ /* @@ -192,6 +215,47 @@ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ +#if defined(CONFIG_RAMBOOT_PBL) +#define CONFIG_SYS_RAMBOOT +#endif + +/* Nand Flash */ +#if defined(CONFIG_P3041DS) || defined(CONFIG_P5020DS) +#define CONFIG_NAND_FSL_ELBC +#ifdef CONFIG_NAND_FSL_ELBC +#define CONFIG_SYS_NAND_BASE 0xffa00000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_NAND_BASE_PHYS 0xfffa00000ull +#else +#define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE +#endif + +#define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE} +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_MTD_NAND_VERIFY_WRITE +#define CONFIG_CMD_NAND +#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) + +/* NAND flash config */ +#define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ + | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ + | BR_PS_8 /* Port Size = 8 bit */ \ + | BR_MS_FCM /* MSEL = FCM */ \ + | BR_V) /* valid */ +#define CONFIG_SYS_NAND_OR_PRELIM (0xFFFC0000 /* length 256K */ \ + | OR_FCM_PGS /* Large Page*/ \ + | OR_FCM_CSCT \ + | OR_FCM_CST \ + | OR_FCM_CHT \ + | OR_FCM_SCY_1 \ + | OR_FCM_TRLX \ + | OR_FCM_EHTR) + +#define CONFIG_SYS_BR2_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ +#define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ +#endif /* CONFIG_NAND_FSL_ELBC */ +#endif + #define CONFIG_SYS_FLASH_EMPTY_INFO #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS} @@ -330,7 +394,7 @@ #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ /* controller 3, Slot 1, tgtid 1, Base address 202000 */ -#define CONFIG_SYS_PCIE3_MEM_VIRT 0xe0000000 +#define CONFIG_SYS_PCIE3_MEM_VIRT 0xc0000000 #ifdef CONFIG_PHYS_64BIT #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc40000000ull @@ -357,6 +421,7 @@ #define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */ /* Qman/Bman */ +#define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ #define CONFIG_SYS_BMAN_NUM_PORTALS 10 #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 #ifdef CONFIG_PHYS_64BIT @@ -389,33 +454,10 @@ #endif #ifdef CONFIG_PCI - -/*PCIE video card used*/ -#define VIDEO_IO_OFFSET CONFIG_SYS_PCIE1_IO_VIRT - -/* video */ -#define CONFIG_VIDEO - -#ifdef CONFIG_VIDEO -#define CONFIG_BIOSEMU -#define CONFIG_CFB_CONSOLE -#define CONFIG_VIDEO_SW_CURSOR -#define CONFIG_VGA_AS_SINGLE_DEVICE -#define CONFIG_ATI_RADEON_FB -#define CONFIG_VIDEO_LOGO -#define CONFIG_SYS_ISA_IO_BASE_ADDRESS VIDEO_IO_OFFSET -#endif - #define CONFIG_NET_MULTI #define CONFIG_PCI_PNP /* do pci plug-and-play */ #define CONFIG_E1000 -#ifndef CONFIG_PCI_PNP -#define PCI_ENET0_IOADDR CONFIG_SYS_PCI1_IO_BUS -#define PCI_ENET0_MEMADDR CONFIG_SYS_PCI1_IO_BUS -#define PCI_IDSEL_NUMBER 0x11 /* IDSEL = AD11 */ -#endif - #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ #define CONFIG_DOS_PARTITION #endif /* CONFIG_PCI */ @@ -461,7 +503,6 @@ /* * Environment */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) #define CONFIG_ENV_SIZE 0x2000 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ @@ -473,14 +514,15 @@ */ #include <config_cmd_default.h> +#define CONFIG_CMD_DHCP #define CONFIG_CMD_ELF #define CONFIG_CMD_ERRATA +#define CONFIG_CMD_GREPENV #define CONFIG_CMD_IRQ #define CONFIG_CMD_I2C #define CONFIG_CMD_MII #define CONFIG_CMD_PING #define CONFIG_CMD_SETEXPR -#define CONFIG_CMD_DHCP #ifdef CONFIG_PCI #define CONFIG_CMD_PCI @@ -530,11 +572,11 @@ /* * For booting Linux, the board info and command line data - * have to be in the first 16 MB of memory, since this is + * have to be in the first 64 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux*/ -#define CONFIG_SYS_BOOTM_LEN (16 << 20) /* Increase max gunzip size */ +#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/ +#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ #ifdef CONFIG_CMD_KGDB #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ diff --git a/include/configs/cpu9260.h b/include/configs/cpu9260.h index d239423..a8ada2d 100644 --- a/include/configs/cpu9260.h +++ b/include/configs/cpu9260.h @@ -31,35 +31,39 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define CONFIG_AT91_LEGACY - -#define CONFIG_DISPLAY_CPUINFO 1 +/* to be removed once maemory-map.h is fixed */ +#define AT91_BASE_SYS 0xffffe800 +#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS) #define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 #define CONFIG_SYS_HZ 1000 -#define CONFIG_ARM926EJS 1 - -#if defined(CONFIG_CPU9260_128M) || defined(CONFIG_CPU9260) -#define CONFIG_CPU9260 1 -#elif defined(CONFIG_CPU9G20_128M) || defined(CONFIG_CPU9G20) -#define CONFIG_CPU9G20 1 -#endif +#define CONFIG_ARM926EJS #if defined(CONFIG_CPU9G20) -#define CONFIG_AT91SAM9G20 1 +#define CONFIG_AT91SAM9G20 #elif defined(CONFIG_CPU9260) -#define CONFIG_AT91SAM9260 1 +#define CONFIG_AT91SAM9260 #else #error "Unknown board" #endif +#define CONFIG_AT91FAMILY #define CONFIG_ARCH_CPU_INIT #undef CONFIG_USE_IRQ +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_BOARD_EARLY_INIT_F -#define CONFIG_CMDLINE_TAG 1 -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG + +#if defined(CONFIG_NANDBOOT) +#define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_SYS_TEXT_BASE 0x23f00000 +#else +#define CONFIG_SYS_TEXT_BASE 0x00000000 +#endif /* clocks */ #if defined(CONFIG_CPU9G20) @@ -113,8 +117,8 @@ /* EBI_CSA, 3.3V, no pull-ups for D[15:0], CS1 SDRAM, CS3 NAND Flash */ #define CONFIG_SYS_MATRIX_EBICSA_VAL \ - (AT91_MATRIX_DBPUC | AT91_MATRIX_CS1A_SDRAMC |\ - AT91_MATRIX_CS3A_SMC_SMARTMEDIA | AT91_MATRIX_VDDIOMSEL) + (AT91_MATRIX_CSA_DBPUC | AT91_MATRIX_CSA_EBI_CS1A | \ + AT91_MATRIX_CSA_EBI_CS3A | AT91_MATRIX_CSA_VDDIOMSEL_3_3V) /* SDRAM */ /* SDRAMC_MR Mode register */ @@ -199,67 +203,68 @@ /* setup SMC0, CS0 (NOR Flash) - 16-bit */ #if defined(CONFIG_CPU9G20) #define CONFIG_SYS_SMC0_SETUP0_VAL \ - (AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0) | \ - AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0)) + (AT91_SMC_SETUP_NWE(0) | AT91_SMC_SETUP_NCS_WR(0) | \ + AT91_SMC_SETUP_NRD(0) | AT91_SMC_SETUP_NCS_RD(0)) #define CONFIG_SYS_SMC0_PULSE0_VAL \ - (AT91_SMC_NWEPULSE_(8) | AT91_SMC_NCS_WRPULSE_(8) | \ - AT91_SMC_NRDPULSE_(14) | AT91_SMC_NCS_RDPULSE_(14)) + (AT91_SMC_PULSE_NWE(8) | AT91_SMC_PULSE_NCS_WR(8) | \ + AT91_SMC_PULSE_NRD(14) | AT91_SMC_PULSE_NCS_RD(14)) #define CONFIG_SYS_SMC0_CYCLE0_VAL \ - (AT91_SMC_NWECYCLE_(8) | AT91_SMC_NRDCYCLE_(14)) + (AT91_SMC_CYCLE_NWE(8) | AT91_SMC_CYCLE_NRD(14)) #define CONFIG_SYS_SMC0_MODE0_VAL \ - (AT91_SMC_READMODE | AT91_SMC_WRITEMODE | \ - AT91_SMC_DBW_16 | \ - AT91_SMC_TDFMODE | \ - AT91_SMC_TDF_(3)) + (AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | \ + AT91_SMC_MODE_DBW_16 | \ + AT91_SMC_MODE_TDF | \ + AT91_SMC_MODE_TDF_CYCLE(3)) #elif defined(CONFIG_CPU9260) #define CONFIG_SYS_SMC0_SETUP0_VAL \ - (AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0) | \ - AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0)) + (AT91_SMC_SETUP_NWE(0) | AT91_SMC_SETUP_NCS_WR(0) | \ + AT91_SMC_SETUP_NRD(0) | AT91_SMC_SETUP_NCS_RD(0)) #define CONFIG_SYS_SMC0_PULSE0_VAL \ - (AT91_SMC_NWEPULSE_(6) | AT91_SMC_NCS_WRPULSE_(6) | \ - AT91_SMC_NRDPULSE_(10) | AT91_SMC_NCS_RDPULSE_(10)) + (AT91_SMC_PULSE_NWE(6) | AT91_SMC_PULSE_NCS_WR(6) | \ + AT91_SMC_PULSE_NRD(10) | AT91_SMC_PULSE_NCS_RD(10)) #define CONFIG_SYS_SMC0_CYCLE0_VAL \ - (AT91_SMC_NWECYCLE_(6) | AT91_SMC_NRDCYCLE_(10)) + (AT91_SMC_CYCLE_NWE(6) | AT91_SMC_CYCLE_NRD(10)) #define CONFIG_SYS_SMC0_MODE0_VAL \ - (AT91_SMC_READMODE | AT91_SMC_WRITEMODE | \ - AT91_SMC_DBW_16 | \ - AT91_SMC_TDFMODE | \ - AT91_SMC_TDF_(2)) + (AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | \ + AT91_SMC_MODE_DBW_16 | \ + AT91_SMC_MODE_TDF | \ + AT91_SMC_MODE_TDF_CYCLE(2)) #endif /* user reset enable */ #define CONFIG_SYS_RSTC_RMR_VAL \ (AT91_RSTC_KEY | \ - AT91_RSTC_PROCRST | \ - AT91_RSTC_RSTTYP_WAKEUP | \ - AT91_RSTC_RSTTYP_WATCHDOG) + AT91_RSTC_CR_PROCRST | \ + AT91_RSTC_MR_ERSTL(1) | \ + AT91_RSTC_MR_ERSTL(2)) /* Disable Watchdog */ #define CONFIG_SYS_WDTC_WDMR_VAL \ - (AT91_WDT_WDIDLEHLT | AT91_WDT_WDDBGHLT | \ - AT91_WDT_WDV | \ - AT91_WDT_WDDIS | \ - AT91_WDT_WDD) + (AT91_WDT_MR_WDIDLEHLT | AT91_WDT_MR_WDDBGHLT | \ + AT91_WDT_MR_WDV(0xfff) | \ + AT91_WDT_MR_WDDIS | \ + AT91_WDT_MR_WDD(0xfff)) /* * Hardware drivers */ -#define CONFIG_AT91_GPIO 1 -#define CONFIG_ATMEL_USART 1 +#define CONFIG_AT91SAM9_WATCHDOG +#define CONFIG_AT91_GPIO +#define CONFIG_ATMEL_USART #undef CONFIG_USART0 #undef CONFIG_USART1 #undef CONFIG_USART2 -#define CONFIG_USART3 1 /* USART 3 is DBGU */ +#define CONFIG_USART3 #define CONFIG_BOOTDELAY 3 /* * BOOTP options */ -#define CONFIG_BOOTP_BOOTFILESIZE 1 -#define CONFIG_BOOTP_BOOTPATH 1 -#define CONFIG_BOOTP_GATEWAY 1 -#define CONFIG_BOOTP_HOSTNAME 1 +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME /* * Command line configuration. @@ -271,37 +276,41 @@ #undef CONFIG_CMD_LOADS #undef CONFIG_CMD_IMLS -#define CONFIG_CMD_PING 1 -#define CONFIG_CMD_DHCP 1 -#define CONFIG_CMD_NAND 1 -#define CONFIG_CMD_USB 1 -#define CONFIG_CMD_FAT 1 +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_NAND +#define CONFIG_CMD_USB +#define CONFIG_CMD_FAT +#define CONFIG_CMD_MII /* SDRAM */ #define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM 0x20000000 +#define CONFIG_SYS_SDRAM_BASE 0x20000000 #if defined(CONFIG_CPU9260_128M) || defined(CONFIG_CPU9G20_128M) -#define PHYS_SDRAM_SIZE 0x08000000 /* 128 MB */ +#define CONFIG_SYS_SDRAM_SIZE (128 * 1024 * 1024) #define CONFIG_SYS_SDRC_CR_VAL CONFIG_SYS_SDRC_CR_VAL_128MB #else -#define PHYS_SDRAM_SIZE 0x04000000 /* 64 MB */ +#define CONFIG_SYS_SDRAM_SIZE (64 * 1024 * 1024) #define CONFIG_SYS_SDRC_CR_VAL CONFIG_SYS_SDRC_CR_VAL_64MB #endif /* NAND flash */ -#define CONFIG_NAND_ATMEL 1 +#define CONFIG_NAND_ATMEL #define NAND_MAX_CHIPS 1 #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE 0x40000000 #define CONFIG_SYS_NAND_DBW_8 1 -#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13 -#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 +#define CONFIG_SYS_NAND_READY_PIN AT91_PIO_PORTC, 13 +#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIO_PORTC, 14 #define CONFIG_SYS_NAND_MASK_ALE (1 << 21) #define CONFIG_SYS_NAND_MASK_CLE (1 << 22) /* NOR flash */ -#define CONFIG_SYS_FLASH_CFI 1 -#define CONFIG_FLASH_CFI_DRIVER 1 +#if defined(CONFIG_NANDBOOT) +#define CONFIG_SYS_NO_FLASH +#else +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_FLASH_CFI_DRIVER #define PHYS_FLASH_1 0x10000000 #define PHYS_FLASH_2 0x12000000 #define CONFIG_SYS_FLASH_BANKS_LIST \ @@ -310,23 +319,23 @@ #define CONFIG_SYS_MAX_FLASH_SECT (255+4) #define CONFIG_SYS_MAX_FLASH_BANKS 2 #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT -#define CONFIG_SYS_FLASH_EMPTY_INFO 1 -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 -#define CONFIG_SYS_FLASH_PROTECTION 1 +#define CONFIG_SYS_FLASH_EMPTY_INFO +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE +#define CONFIG_SYS_FLASH_PROTECTION #define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1 +#endif /* Ethernet */ -#define CONFIG_MACB 1 -#define CONFIG_RMII 1 -#define CONFIG_RESET_PHY_R 1 -#define CONFIG_NET_MULTI 1 +#define CONFIG_MACB +#define CONFIG_RMII +#define CONFIG_NET_MULTI #define CONFIG_NET_RETRY_COUNT 20 -#define CONFIG_MACB_SEARCH_PHY 1 +#define CONFIG_MACB_SEARCH_PHY /* LEDS */ /* Status LED */ -#define CONFIG_STATUS_LED 1 /* Status LED enabled */ -#define CONFIG_BOARD_SPECIFIC_LED 1 +#define CONFIG_STATUS_LED +#define CONFIG_BOARD_SPECIFIC_LED #define STATUS_LED_RED 0 #define STATUS_LED_GREEN 1 #define STATUS_LED_YELLOW 2 @@ -350,39 +359,56 @@ /* Optional value */ #define STATUS_LED_BOOT STATUS_LED_BIT -#define CONFIG_RED_LED AT91_PIN_PC11 -#define CONFIG_GREEN_LED AT91_PIN_PC12 -#define CONFIG_YELLOW_LED AT91_PIN_PC7 -#define CONFIG_BLUE_LED AT91_PIN_PC9 +#define CONFIG_RED_LED AT91_PIO_PORTC, 11 +#define CONFIG_GREEN_LED AT91_PIO_PORTC, 12 +#define CONFIG_YELLOW_LED AT91_PIO_PORTC, 7 +#define CONFIG_BLUE_LED AT91_PIO_PORTC, 9 /* USB */ -#define CONFIG_USB_ATMEL 1 -#define CONFIG_USB_OHCI_NEW 1 -#define CONFIG_DOS_PARTITION 1 -#define CONFIG_SYS_USB_OHCI_CPU_INIT 1 +#define CONFIG_USB_ATMEL +#define CONFIG_USB_OHCI_NEW +#define CONFIG_DOS_PARTITION +#define CONFIG_SYS_USB_OHCI_CPU_INIT #define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 +#if defined(CONFIG_CPU9G20) +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9g20" +#elif defined(CONFIG_CPU9260) #define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260" +#endif #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 -#define CONFIG_USB_STORAGE 1 +#define CONFIG_USB_STORAGE #define CONFIG_SYS_LOAD_ADDR 0x21000000 +#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR -#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM -#define CONFIG_SYS_MEMTEST_END 0x21e00000 +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE +#define CONFIG_SYS_MEMTEST_END \ + (CONFIG_SYS_MEMTEST_START + CONFIG_SYS_SDRAM_SIZE - 512 * 1024) +#if defined(CONFIG_NANDBOOT) +#define CONFIG_SYS_USE_NANDFLASH +#undef CONFIG_SYS_USE_FLASH +#else +#define CONFIG_SYS_USE_FLASH #undef CONFIG_SYS_USE_NANDFLASH -#define CONFIG_SYS_USE_FLASH 1 +#endif + +#if defined(CONFIG_CPU9G20) +#define CONFIG_SYS_BASEDIR "cpu9G20" +#elif defined(CONFIG_CPU9260) +#define CONFIG_SYS_BASEDIR "cpu9260" +#endif #if defined(CONFIG_SYS_USE_FLASH) -#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_IS_IN_FLASH #define CONFIG_ENV_OFFSET 0x40000 #define CONFIG_ENV_SECT_SIZE 0x20000 #define CONFIG_ENV_SIZE 0x20000 -#define CONFIG_ENV_OVERWRITE 1 +#define CONFIG_ENV_OVERWRITE #define CONFIG_BOOTCOMMAND "run flashboot" -#define MTDIDS_DEFAULT "nor0=physmap-flash.0,nand0=atmel_nand" +#define MTDIDS_DEFAULT "nor0=physmap-flash.0,nand0=atmel_nand" #define MTDPARTS_DEFAULT \ "mtdparts=physmap-flash.0:" \ "256k(u-boot)ro," \ @@ -393,18 +419,12 @@ #define CONFIG_BOOTARGS "root=/dev/mtdblock3 rootfstype=jffs2 " -#if defined(CONFIG_CPU9G20) -#define CONFIG_SYS_BASEDIR "cpu9G20" -#elif defined(CONFIG_CPU9260) -#define CONFIG_SYS_BASEDIR "cpu9260" -#endif - #define CONFIG_EXTRA_ENV_SETTINGS \ "mtdids=" MTDIDS_DEFAULT "\0" \ "mtdparts=" MTDPARTS_DEFAULT "\0" \ "partition=nand0,0\0" \ "ramargs=setenv bootargs $(bootargs) $(mtdparts)\0" \ - "ramboot=tftpboot 0x22000000 cpu9260/uImage;" \ + "ramboot=tftpboot 0x22000000 $(basedir)/uImage;" \ "run ramargs;bootm 22000000\0" \ "flashboot=run ramargs;bootm 0x10060000\0" \ "basedir=" CONFIG_SYS_BASEDIR "\0" \ @@ -421,6 +441,52 @@ "0x10220000 0x13ffffff;cp.b 0x24000000 " \ "0x10220000 $(filesize)\0" \ "" +#elif defined(CONFIG_NANDBOOT) +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET 0x60000 +#define CONFIG_ENV_OFFSET_REDUND 0x80000 +#define CONFIG_ENV_SECT_SIZE 0x20000 +#define CONFIG_ENV_SIZE 0x20000 +#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_BOOTCOMMAND "run flashboot" + +#define MTDIDS_DEFAULT "nand0=atmel_nand" +#define MTDPARTS_DEFAULT \ + "mtdparts=atmel_nand:" \ + "128k(bootstrap)ro," \ + "256k(u-boot)ro," \ + "128k(u-boot-env)ro," \ + "128k(u-boot-env2)ro," \ + "2M(kernel)," \ + "-(rootfs)" + +#define CONFIG_BOOTARGS "root=ubi0:eukrea-cpu9260-rootfs " \ + "ubi.mtd=5 rootfstype=ubifs at91sam9_wdt.heartbeat=60" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "mtdids=" MTDIDS_DEFAULT "\0" \ + "mtdparts=" MTDPARTS_DEFAULT "\0" \ + "partition=nand0,5\0" \ + "ramargs=setenv bootargs $(bootargs) $(mtdparts)\0" \ + "ramboot=tftpboot 0x22000000 $(basedir)/uImage;" \ + "run ramargs;bootm 22000000\0" \ + "flashboot=run ramargs; nand read 0x22000000 0xA0000 " \ + "0x200000; bootm 0x22000000\0" \ + "basedir=" CONFIG_SYS_BASEDIR "\0" \ + "u-boot=u-boot-eukrea-cpu9260.bin\0" \ + "kernel=uImage-eukrea-cpu9260.bin\0" \ + "rootfs=image-eukrea-cpu9260.ubi\0" \ + "updtub=tftp ${loadaddr} $(basedir)/${u-boot}; " \ + "nand erase 20000 40000; " \ + "nand write ${loadaddr} 20000 40000\0" \ + "updtui=tftp ${loadaddr} $(basedir)/${kernel}; " \ + "nand erase a0000 200000; " \ + "nand write ${loadaddr} a0000 200000\0" \ + "updtrfs=tftp ${loadaddr} $(basedir)/${rootfs}; " \ + "nand erase 2a0000 fd60000; " \ + "nand write ${loadaddr} 2a0000 ${filesize}\0" #endif #define CONFIG_BAUDRATE 115200 @@ -435,10 +501,10 @@ #define CONFIG_SYS_MAXARGS 16 #define CONFIG_SYS_PBSIZE \ (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_LONGHELP 1 -#define CONFIG_CMDLINE_EDITING 1 -#define CONFIG_SILENT_CONSOLE 1 -#define CONFIG_NETCONSOLE 1 +#define CONFIG_SYS_LONGHELP +#define CONFIG_CMDLINE_EDITING +#define CONFIG_SILENT_CONSOLE +#define CONFIG_NETCONSOLE /* * Size of malloc() pool @@ -446,6 +512,9 @@ #define CONFIG_SYS_MALLOC_LEN \ ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000) +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - \ + GENERATED_GBL_DATA_SIZE) + #define CONFIG_STACKSIZE (32 * 1024) #if defined(CONFIG_USE_IRQ) diff --git a/include/configs/cpuat91.h b/include/configs/cpuat91.h index f31081d..cfaef15 100644 --- a/include/configs/cpuat91.h +++ b/include/configs/cpuat91.h @@ -26,30 +26,36 @@ #ifndef _CONFIG_CPUAT91_H #define _CONFIG_CPUAT91_H -#ifdef CONFIG_CPUAT91_RAM -#define CONFIG_SKIP_LOWLEVEL_INIT 1 +#include <asm/sizes.h> + +#ifdef CONFIG_RAMBOOT +#define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_SYS_TEXT_BASE 0x21F00000 #else #define CONFIG_BOOTDELAY 1 +#define CONFIG_SYS_TEXT_BASE 0 #endif -#define AT91C_MAIN_CLOCK 179712000 -#define AT91C_MASTER_CLOCK 59904000 - -#define AT91_SLOW_CLOCK 32768 +#define AT91C_XTAL_CLOCK 18432000 +#define AT91C_MAIN_CLOCK ((AT91C_XTAL_CLOCK / 4) * 39) +#define AT91C_MASTER_CLOCK (AT91C_MAIN_CLOCK / 3) +#define CONFIG_SYS_HZ_CLOCK (AT91C_MASTER_CLOCK / 2) +#define CONFIG_SYS_HZ 1000 -#define CONFIG_ARM920T 1 -#define CONFIG_AT91RM9200 1 -#define CONFIG_CPUAT91 1 +#define CONFIG_ARM920T +#define CONFIG_AT91RM9200 +#define CONFIG_CPUAT91 +#define CONFIG_AT91FAMILY #undef CONFIG_USE_IRQ -#define USE_920T_MMU 1 +#define USE_920T_MMU -#define CONFIG_CMDLINE_TAG 1 -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG #ifndef CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SYS_USE_MAIN_OSCILLATOR 1 +#define CONFIG_SYS_USE_MAIN_OSCILLATOR /* flash */ #define CONFIG_SYS_MC_PUIA_VAL 0x00000000 #define CONFIG_SYS_MC_PUP_VAL 0x00000000 @@ -81,17 +87,15 @@ #endif /* CONFIG_SKIP_LOWLEVEL_INIT */ /* define one of these to choose the DBGU, USART0 or USART1 as console */ -#define CONFIG_AT91RM9200_USART 1 -#define CONFIG_DBGU 1 -#undef CONFIG_USART0 -#undef CONFIG_USART1 +#define CONFIG_AT91RM9200_USART +#define CONFIG_DBGU #undef CONFIG_HARD_I2C -#define CONFIG_SOFT_I2C 1 +#undef CONFIG_SOFT_I2C #define AT91_PIN_SDA (1<<25) #define AT91_PIN_SCL (1<<26) -#define CONFIG_SYS_I2C_INIT_BOARD 1 +#define CONFIG_SYS_I2C_INIT_BOARD #define CONFIG_SYS_I2C_SPEED 50000 #define CONFIG_SYS_I2C_SLAVE 0 @@ -117,70 +121,77 @@ #define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 1 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 -#define CONFIG_BOOTP_BOOTFILESIZE 1 -#define CONFIG_BOOTP_BOOTPATH 1 -#define CONFIG_BOOTP_GATEWAY 1 -#define CONFIG_BOOTP_HOSTNAME 1 +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME #include <config_cmd_default.h> -#define CONFIG_CMD_DHCP 1 -#define CONFIG_CMD_PING 1 -#define CONFIG_CMD_MII 1 -#define CONFIG_CMD_CACHE 1 +#define CONFIG_CMD_PING +#define CONFIG_CMD_MII +#define CONFIG_CMD_CACHE #undef CONFIG_CMD_USB #undef CONFIG_CMD_FPGA #undef CONFIG_CMD_IMI #undef CONFIG_CMD_LOADS #undef CONFIG_CMD_NFS +#undef CONFIG_CMD_DHCP -#define CONFIG_CMD_EEPROM 1 -#define CONFIG_CMD_I2C 1 +#ifdef CONFIG_SOFT_I2C +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_I2C +#endif #define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM 0x20000000 -#define PHYS_SDRAM_SIZE 0x02000000 +#define CONFIG_SYS_SDRAM_BASE 0x20000000 +#define CONFIG_SYS_SDRAM_SIZE (32 * 1024 * 1024) -#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE #define CONFIG_SYS_MEMTEST_END \ - (CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 512 * 1024) + (CONFIG_SYS_MEMTEST_START + CONFIG_SYS_SDRAM_SIZE - 512 * 1024) -#define CONFIG_NET_MULTI 1 -#define CONFIG_DRIVER_AT91EMAC 1 -#define CONFIG_SYS_RX_ETH_BUFFER 8 -#define CONFIG_RMII 1 -#define CONFIG_MII 1 +#define CONFIG_NET_MULTI +#define CONFIG_DRIVER_AT91EMAC +#define CONFIG_SYS_RX_ETH_BUFFER 16 +#define CONFIG_RMII +#define CONFIG_MII #define CONFIG_DRIVER_AT91EMAC_PHYADDR 1 #define CONFIG_NET_RETRY_COUNT 20 -#define CONFIG_KS8721_PHY 1 +#define CONFIG_KS8721_PHY -#define CONFIG_SYS_FLASH_CFI 1 -#define CONFIG_FLASH_CFI_DRIVER 1 -#define CONFIG_SYS_FLASH_EMPTY_INFO 1 -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_EMPTY_INFO +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE #define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_FLASH_PROTECTION 1 +#define CONFIG_SYS_FLASH_PROTECTION #define PHYS_FLASH_1 0x10000000 #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 #define CONFIG_SYS_MAX_FLASH_SECT 128 #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT +#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1 +#define PHYS_FLASH_SIZE (16 * 1024 * 1024) +#define CONFIG_SYS_FLASH_BANKS_LIST \ + { PHYS_FLASH_1 } #if defined(CONFIG_CMD_USB) -#define CONFIG_USB_OHCI_NEW 1 -#define CONFIG_USB_STORAGE 1 -#define CONFIG_DOS_PARTITION 1 -#define CONFIG_AT91C_PQFP_UHPBU 1 +#define CONFIG_USB_ATMEL +#define CONFIG_USB_OHCI_NEW +#define CONFIG_USB_STORAGE +#define CONFIG_DOS_PARTITION +#define CONFIG_AT91C_PQFP_UHPBU #undef CONFIG_SYS_USB_OHCI_BOARD_INIT -#define CONFIG_SYS_USB_OHCI_CPU_INIT 1 +#define CONFIG_SYS_USB_OHCI_CPU_INIT #define CONFIG_SYS_USB_OHCI_REGS_BASE AT91_USB_HOST_BASE #define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91rm9200" #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15 #endif -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x20000) -#define CONFIG_ENV_SIZE 0x20000 -#define CONFIG_ENV_SECT_SIZE 0x20000 +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 128 * 1024) +#define CONFIG_ENV_SIZE (128 * 1024) +#define CONFIG_ENV_SECT_SIZE (128 * 1024) #define CONFIG_SYS_LOAD_ADDR 0x21000000 @@ -192,29 +203,33 @@ #define CONFIG_SYS_MAXARGS 32 #define CONFIG_SYS_PBSIZE \ (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_CMDLINE_EDITING 1 -#define CONFIG_SYS_LONGHELP 1 +#define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_HZ 1000 -#define CONFIG_SYS_HZ_CLOCK (AT91C_MASTER_CLOCK / 2) +#define CONFIG_SYS_MALLOC_LEN \ + ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 4 * 1024) + +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - \ + GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024) #define CONFIG_STACKSIZE (32 * 1024) +#define CONFIG_STACKSIZE_IRQ (4 * 1024) +#define CONFIG_STACKSIZE_FIQ (4 * 1024) + #if defined(CONFIG_USE_IRQ) #error CONFIG_USE_IRQ not supported #endif -#define CONFIG_DEVICE_NULLDEV 1 -#define CONFIG_SILENT_CONSOLE 1 +#define CONFIG_DEVICE_NULLDEV +#define CONFIG_SILENT_CONSOLE -#define CONFIG_AUTOBOOT_KEYED 1 +#define CONFIG_AUTOBOOT_KEYED #define CONFIG_AUTOBOOT_PROMPT \ "Press SPACE to abort autoboot\n" #define CONFIG_AUTOBOOT_STOP_STR " " #define CONFIG_AUTOBOOT_DELAY_STR "d" -#define CONFIG_VERSION_VARIABLE 1 +#define CONFIG_VERSION_VARIABLE #define MTDIDS_DEFAULT "nor0=physmap-flash.0" #define MTDPARTS_DEFAULT \ diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h index d898b77..e02793d 100644 --- a/include/configs/devkit8000.h +++ b/include/configs/devkit8000.h @@ -61,6 +61,8 @@ #define CONFIG_INITRD_TAG 1 #define CONFIG_REVISION_TAG 1 +#define CONFIG_OF_LIBFDT 1 + /* Size of malloc() pool */ #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ /* Sector */ @@ -297,15 +299,7 @@ #define CONFIG_ENV_IS_IN_NAND 1 #define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ -#define CONFIG_ENV_OFFSET boot_flash_off - -#ifndef __ASSEMBLY__ -extern unsigned int boot_flash_base; -extern volatile unsigned int boot_flash_env_addr; -extern unsigned int boot_flash_off; -extern unsigned int boot_flash_sec; -extern unsigned int boot_flash_type; -#endif +#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 #define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 diff --git a/include/configs/dig297.h b/include/configs/dig297.h new file mode 100644 index 0000000..7aeb24e --- /dev/null +++ b/include/configs/dig297.h @@ -0,0 +1,311 @@ +/* + * (C) Copyright 2011 Comelit Group SpA + * Luca Ceresoli <luca.ceresoli@comelit.it> + * + * Based on omap3_beagle.h: + * (C) Copyright 2006-2008 + * Texas Instruments. + * Richard Woodruff <r-woodruff2@ti.com> + * Syed Mohammed Khasim <x0khasim@ti.com> + * + * Configuration settings for the Comelit DIG297 board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ +#define CONFIG_ARMV7 /* This is an ARM V7 CPU core */ +#define CONFIG_OMAP /* in a TI OMAP core */ +#define CONFIG_OMAP34XX /* which is a 34XX */ +#define CONFIG_OMAP3430 /* which is in a 3430 */ + +#define CONFIG_SYS_TEXT_BASE 0x80008000 + +#define CONFIG_SDRC /* The chip has SDRC controller */ + +#include <asm/arch/cpu.h> /* get chip and board defs */ +#include <asm/arch/omap3.h> + +/* + * Display CPU and Board information + */ +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +/* Clock Defines */ +#define V_OSCK 26000000 /* Clock output from T2 */ +#define V_SCLK (V_OSCK >> 1) + +#undef CONFIG_USE_IRQ /* no support for IRQs */ +#define CONFIG_MISC_INIT_R + +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG +#define CONFIG_REVISION_TAG + +/* + * Size of malloc() pool + */ +#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ + /* Sector */ +#define CONFIG_SYS_MALLOC_LEN (1024 << 10) /* UBI needs >= 512 kB */ + +/* + * Hardware drivers + */ + +/* + * NS16550 Configuration + */ +#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ + +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK + +/* + * select serial console configuration: UART3 (ttyO2) + */ +#define CONFIG_CONS_INDEX 3 +#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 +#define CONFIG_SERIAL3 3 + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ + 115200} +#define CONFIG_MMC +#define CONFIG_OMAP3_MMC +#define CONFIG_DOS_PARTITION + +/* DDR - I use Micron DDR */ +#define CONFIG_OMAP3_MICRON_DDR + +/* library portions to compile in */ +#define CONFIG_RBTREE +#define CONFIG_MTD_PARTITIONS +#define CONFIG_LZO + +/* commands to include */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_FAT /* FAT support */ +#define CONFIG_CMD_UBI /* UBI Support */ +#define CONFIG_CMD_UBIFS /* UBIFS Support */ +#define CONFIG_CMD_MTDPARTS /* Enable MTD parts commands */ +#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ +#define MTDIDS_DEFAULT "nand0=omap2-nand.0" +#define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:896k(uboot),"\ + "128k(uboot-env),3m(kernel),252m(ubi)" + +#define CONFIG_CMD_I2C /* I2C serial bus support */ +#define CONFIG_CMD_MMC /* MMC support */ +#define CONFIG_CMD_NAND /* NAND support */ + +#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */ +#undef CONFIG_CMD_FPGA /* FPGA configuration Support */ +#undef CONFIG_CMD_IMI /* iminfo */ +#undef CONFIG_CMD_IMLS /* List all found images */ +#define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ +#undef CONFIG_CMD_NFS /* NFS support */ + +#define CONFIG_SYS_NO_FLASH +#define CONFIG_HARD_I2C +#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_SYS_I2C_SLAVE 1 +#define CONFIG_SYS_I2C_BUS 0 +#define CONFIG_SYS_I2C_BUS_SELECT 1 +#define CONFIG_DRIVER_OMAP34XX_I2C 1 + +/* + * TWL4030 + */ +#define CONFIG_TWL4030_POWER +#define CONFIG_TWL4030_LED + +/* + * Board NAND Info. + */ +#define CONFIG_NAND_OMAP_GPMC +#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ + /* to access nand */ +#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ + /* to access nand at */ + /* CS0 */ +#define GPMC_NAND_ECC_LP_x16_LAYOUT + +#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ + +#if defined(CONFIG_CMD_NET) +/* + * SMSC9220 Ethernet + */ + +#define CONFIG_NET_MULTI +#define CONFIG_SMC911X +#define CONFIG_SMC911X_32_BIT +#define CONFIG_SMC911X_BASE 0x2C000000 + +#endif /* (CONFIG_CMD_NET) */ + +/* Environment information */ +#define CONFIG_BOOTDELAY 1 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "loadaddr=0x82000000\0" \ + "console=ttyO2,115200n8\0" \ + "mtdids=" MTDIDS_DEFAULT "\0" \ + "mtdparts=" MTDPARTS_DEFAULT "\0" \ + "partition=nand0,3\0"\ + "mmcroot=/dev/mmcblk0p2 rw\0" \ + "mmcrootfstype=ext3 rootwait\0" \ + "nandroot=ubi0:rootfs ro\0" \ + "nandrootfstype=ubifs\0" \ + "nfspath=/srv/nfs\0" \ + "tftpfilename=uImage\0" \ + "gatewayip=0.0.0.0\0" \ + "mmcargs=setenv bootargs console=${console} " \ + "${mtdparts} " \ + "root=${mmcroot} " \ + "rootfstype=${mmcrootfstype} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:" \ + "${netmask}:${hostname}::off\0" \ + "nandargs=setenv bootargs console=${console} " \ + "${mtdparts} " \ + "ubi.mtd=3 " \ + "root=${nandroot} " \ + "rootfstype=${nandrootfstype} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:" \ + "${netmask}:${hostname}::off\0" \ + "netargs=setenv bootargs console=${console} " \ + "${mtdparts} " \ + "root=/dev/nfs rw " \ + "nfsroot=${serverip}:${nfspath} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:" \ + "${netmask}:${hostname}::off\0" \ + "mmcboot=echo Booting from mmc ...; " \ + "run mmcargs; " \ + "bootm ${loadaddr}\0" \ + "nandboot=echo Booting from nand ...; " \ + "run nandargs; " \ + "nand read ${loadaddr} 100000 300000; " \ + "bootm ${loadaddr}\0" \ + "netboot=echo Booting from network ...; " \ + "run netargs; " \ + "tftp ${loadaddr} ${serverip}:${tftpfilename}; " \ + "bootm ${loadaddr}\0" \ + "resetenv=nand erase e0000 20000\0"\ + +#define CONFIG_BOOTCOMMAND \ + "run nandboot" + +#define CONFIG_AUTO_COMPLETE +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_PROMPT "DIG297# " +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) + +#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) /* memtest */ + /* works on */ +#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \ + 0x01F00000) /* 31MB */ + +#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default */ + /* load address */ + +/* + * OMAP3 has 12 GP timers, they can be driven by the system clock + * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). + * This rate is divided by a local divisor. + */ +#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) +#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ +#define CONFIG_SYS_HZ 1000 + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */ +#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */ +#endif + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ +#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 +#define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 MiB */ +#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 + +/* SDRAM Bank Allocation method */ +#define SDRC_R_B_C 1 + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ + +/* **** PISMO SUPPORT *** */ + +/* Configure the PISMO */ +#define PISMO1_NAND_SIZE GPMC_SIZE_128M + +#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ + +#define CONFIG_SYS_FLASH_BASE boot_flash_base + +/* Monitor at start of flash */ +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE + +#define CONFIG_ENV_IS_IN_NAND +#define SMNAND_ENV_OFFSET 0x0E0000 /* environment starts here */ + +#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ +#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET +#define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 +#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 +#define CONFIG_SYS_INIT_RAM_SIZE 0x800 +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) + +#endif /* __CONFIG_H */ diff --git a/include/configs/digsy_mtc.h b/include/configs/digsy_mtc.h index e7fd0f7..c738b3a 100644 --- a/include/configs/digsy_mtc.h +++ b/include/configs/digsy_mtc.h @@ -252,6 +252,8 @@ #if defined(CONFIG_DIGSY_REV5) #define CONFIG_SYS_I2C_RTC_ADDR 0x56 #define CONFIG_RTC_RV3029 +/* Enable 5k Ohm trickle charge resistor */ +#define CONFIG_SYS_RV3029_TCR 0x20 #else #define CONFIG_RTC_DS1337 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 @@ -343,7 +345,11 @@ */ #define CONFIG_MPC5xxx_FEC 1 #define CONFIG_MPC5xxx_FEC_MII100 +#if defined(CONFIG_DIGSY_REV5) +#define CONFIG_PHY_ADDR 0x01 +#else #define CONFIG_PHY_ADDR 0x00 +#endif #define CONFIG_PHY_RESET_DELAY 1000 #define CONFIG_NETCONSOLE /* include NetConsole support */ diff --git a/include/configs/dkb.h b/include/configs/dkb.h index 638af5e..b400d0a 100644 --- a/include/configs/dkb.h +++ b/include/configs/dkb.h @@ -47,6 +47,7 @@ #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ #include <config_cmd_default.h> #define CONFIG_CMD_AUTOSCRIPT +#define CONFIG_CMD_I2C #undef CONFIG_CMD_NET #undef CONFIG_CMD_NFS /* @@ -56,6 +57,7 @@ #include "mv-common.h" #undef CONFIG_ARCH_MISC_INIT + /* * Environment variables configurations */ diff --git a/include/configs/dlvision-10g.h b/include/configs/dlvision-10g.h index f7609d7..4fc5262 100644 --- a/include/configs/dlvision-10g.h +++ b/include/configs/dlvision-10g.h @@ -42,6 +42,10 @@ #define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */ +#undef CONFIG_ZERO_BOOTDELAY_CHECK /* ignore keypress on bootdelay==0 */ +#define CONFIG_AUTOBOOT_KEYED /* use key strings to stop autoboot */ +#define CONFIG_AUTOBOOT_STOP_STR " " + /* * Configure PLL */ @@ -111,9 +115,10 @@ /* Temp sensor/hwmon/dtt */ #define CONFIG_DTT_LM63 1 /* National LM63 */ -#define CONFIG_DTT_SENSORS { 0 } /* Sensor addresses */ +#define CONFIG_DTT_SENSORS { 0x4c, 0x4e } /* Sensor addresses */ #define CONFIG_DTT_PWM_LOOKUPTABLE \ - { { 40, 10 }, { 50, 20 }, { 60, 40 } } + { { 40, 10 }, { 43, 13 }, { 46, 16 }, \ + { 50, 20 }, { 53, 27 }, { 56, 34 }, { 60, 40 } } #define CONFIG_DTT_TACH_LIMIT 0xa10 /* EBC peripherals */ @@ -136,6 +141,8 @@ #define CONFIG_SYS_LATCH1_RESET 0xffcf #define CONFIG_SYS_LATCH1_BOOT 0xffff +#define CONFIG_SYS_FPGA_NO_RFL_HI + /* * FLASH organization */ @@ -310,6 +317,7 @@ * OSD Setup */ #define CONFIG_SYS_ICS8N3QV01 +#define CONFIG_SYS_MPC92469AC #define CONFIG_SYS_SIL1178 #define CONFIG_SYS_OSD_SCREENS CONFIG_SYS_FPGA_COUNT diff --git a/include/configs/dnp5370.h b/include/configs/dnp5370.h new file mode 100644 index 0000000..6b328a5 --- /dev/null +++ b/include/configs/dnp5370.h @@ -0,0 +1,128 @@ +/* + * U-boot - Configuration file for SSV DNP5370 board + */ + +#ifndef __CONFIG_DNP5370_H__ +#define __CONFIG_DNP5370_H__ + +/* this must come first */ +#include <asm/config-pre.h> + +/* + * Processor Settings + */ +#define CONFIG_BFIN_CPU bf537-0.3 +#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS + +/* + * Clock Settings + * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV + * SCLK = (CLKIN * VCO_MULT) / SCLK_DIV + */ +#define CONFIG_CLKIN_HZ 25000000 +#define CONFIG_CLKIN_HALF 0 +#define CONFIG_PLL_BYPASS 0 +#define CONFIG_VCO_MULT 24 +#define CONFIG_CCLK_DIV 1 +#define CONFIG_SCLK_DIV 5 + +/* + * Memory Settings + */ +#define CONFIG_MEM_ADD_WDTH 9 +#define CONFIG_MEM_SIZE 32 + +#define CONFIG_EBIU_SDRRC_VAL 0x03a0 +#define CONFIG_EBIU_SDBCTL_VAL 0x0013 +#define CONFIG_EBIU_SDGCTL_VAL 0x8091998d + +#define CONFIG_EBIU_AMGCTL_VAL 0xF7 +#define CONFIG_EBIU_AMBCTL0_VAL 0x7BB07BB0 +#define CONFIG_EBIU_AMBCTL1_VAL 0xFFC27BB0 + +#define CONFIG_SYS_MONITOR_LEN (256 * 1024) +#define CONFIG_SYS_MALLOC_LEN (128 * 1024) + +/* + * Network Settings + */ +#ifndef __ADSPBF534__ +#define CONFIG_ROOTPATH /romfs + +#define CONFIG_NET_MULTI 1 +#define CONFIG_BFIN_MAC 1 +#define CONFIG_PHY_ADDR 0 +#define CONFIG_RMII 1 + +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#endif + +/* + * Flash Settings + * + * Only 3 MB of the 4 MB NOR flash are addressable. + * But limiting the flash size does not seem to work. + * It seems the CFI detection has precedence. + */ +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_BASE 0x20000000 +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_SYS_FLASH_PROTECTION +#define CONFIG_SYS_MAX_FLASH_BANKS 1 +#define CONFIG_SYS_MAX_FLASH_SECT 71 /* (M29W320EB) */ + +/* 512k reserved for u-boot */ +#define CONFIG_SYS_JFFS2_FIRST_SECTOR 15 + +/* + * Env Storage Settings + */ +#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_ADDR 0x20004000 +#define CONFIG_ENV_SIZE 0x00002000 +#define CONFIG_ENV_SECT_SIZE 0x00002000 /* Total Size of Environment Sector */ +#define CONFIG_ENV_OFFSET 0x00004000 /* (CONFIG_ENV_ADDR - CONFIG_FLASH_BASE) */ + +#define ENV_IS_EMBEDDED +#define LDS_BOARD_TEXT \ + arch/blackfin/lib/libblackfin.o (.text*); \ + arch/blackfin/cpu/libblackfin.o (.text*); \ + . = DEFINED(env_offset) ? env_offset : .; \ + common/env_embedded.o (.text*); + +/* + * Misc Settings + */ +#define CONFIG_CMD_GPIO +#define CONFIG_CMD_STRINGS +#define CONFIG_MISC_INIT_R +#define CONFIG_RTC_BFIN +#define CONFIG_SYS_LONGHELP + +/* This disables the hardware watchdog (not inside the bfin) */ +#define CONFIG_DNP5370_EXT_WD_DISABLE 1 + +#define CONFIG_UART_CONSOLE 0 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_BOOTCOMMAND "bootm 0x20030000" +#define CONFIG_BOOTARGS "console=ttyBF0,115200 root=/dev/mtdblock3 rootfstype=ext2" + +/* Convenience commands to update Linux in NOR flash */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "fetchme=tftpboot 0x01000000 uImage;" \ + "iminfo\0" \ + "flashme=protect off 0x20030000 0x2003ffff;" \ + "erase 0x20030000 0x202effff;" \ + "cp.b 0x01000000 0x20030000 0x2c0000\0" \ + "runme=bootm 0x01000000\0" + +/* this sets up the default list of enabled commands */ +#include <config_cmd_default.h> + +#ifndef CONFIG_BFIN_MAC +# undef CONFIG_CMD_NET +# undef CONFIG_CMD_NFS +#endif + +#endif diff --git a/include/configs/eNET.h b/include/configs/eNET.h index 34a9d68..548d52c 100644 --- a/include/configs/eNET.h +++ b/include/configs/eNET.h @@ -33,7 +33,6 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_X86 #define CONFIG_SYS_SC520 #define CONFIG_SYS_SC520_SSI #define CONFIG_SHOW_BOOT_PROGRESS @@ -158,16 +157,19 @@ /*----------------------------------------------------------------------- * Memory organization: * 32kB Stack + * 16kB Cache-As-RAM @ 0x19200000 * 256kB Monitor + * (128kB + Environment Sector Size) malloc pool */ -#define CONFIG_SYS_STACK_SIZE 0x8000 +#define CONFIG_SYS_STACK_SIZE (32 * 1024) #define CONFIG_SYS_CAR_ADDR 0x19200000 -#define CONFIG_SYS_CAR_SIZE 0x00004000 +#define CONFIG_SYS_CAR_SIZE (16 * 1024) #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_CAR_ADDR + \ CONFIG_SYS_CAR_SIZE) #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_MONITOR_LEN (256 * 1024) -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SECT_SIZE + \ + 128*1024) /* Address of temporary Global Data */ #define CONFIG_SYS_INIT_GD_ADDR CONFIG_SYS_CAR_ADDR @@ -198,17 +200,25 @@ #define CONFIG_SYS_FLASH_LEGACY_512Kx8 #define CONFIG_SYS_FLASH_ERASE_TOUT 2000 /* ms */ #define CONFIG_SYS_FLASH_WRITE_TOUT 2000 /* ms */ + /*----------------------------------------------------------------------- * Environment configuration + * - Boot flash is 512kB with 64kB sectors + * - StrataFlash is 32MB with 128kB sectors + * - Redundant embedded environment is 25% of the Boot flash + * - Redundant StrataFlash environment is <1% of the StrataFlash + * - Environment is therefore located in StrataFlash + * - Primary copy is located in first sector of first flash + * - Redundant copy is located in second sector of first flash + * - Stack is only 32kB, so environment size is limited to 4kB */ #define CONFIG_ENV_IS_IN_FLASH #define CONFIG_ENV_SECT_SIZE 0x20000 -#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE +#define CONFIG_ENV_SIZE 0x01000 #define CONFIG_ENV_ADDR CONFIG_SYS_FLASH_BASE_1 -/* Redundant Copy */ #define CONFIG_ENV_ADDR_REDUND (CONFIG_SYS_FLASH_BASE_1 + \ CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SECT_SIZE +#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE /*----------------------------------------------------------------------- * PCI configuration diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h index a75f06a..19b6544 100644 --- a/include/configs/edminiv2.h +++ b/include/configs/edminiv2.h @@ -1,5 +1,5 @@ /* - * Copyright (C) 2010 Albert ARIBAUD <albert.aribaud@free.fr> + * Copyright (C) 2010 Albert ARIBAUD <albert.u.boot@aribaud.net> * * Based on original Kirkwood support which is * (C) Copyright 2009 diff --git a/include/configs/efikamx.h b/include/configs/efikamx.h index 1424347..571c3cb 100644 --- a/include/configs/efikamx.h +++ b/include/configs/efikamx.h @@ -66,6 +66,8 @@ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG +#define CONFIG_OF_LIBFDT 1 + /* * Size of malloc() pool */ diff --git a/include/configs/harmony.h b/include/configs/harmony.h index d004f31..34bd899 100644 --- a/include/configs/harmony.h +++ b/include/configs/harmony.h @@ -46,4 +46,5 @@ #define CONFIG_MACH_TYPE MACH_TYPE_HARMONY #define CONFIG_SYS_BOARD_ODMDATA 0x300d8011 /* lp1, 1GB */ +#define CONFIG_BOARD_EARLY_INIT_F #endif /* __CONFIG_H */ diff --git a/include/configs/ibf-dsp561.h b/include/configs/ibf-dsp561.h index e2dbbb1..055f8a0 100644 --- a/include/configs/ibf-dsp561.h +++ b/include/configs/ibf-dsp561.h @@ -11,6 +11,7 @@ /* * Processor Settings */ +#define CONFIG_BFIN_CPU bf561-0.5 #define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS @@ -79,8 +80,8 @@ #define CONFIG_SYS_MAX_FLASH_SECT 135 /* max number of sectors on one chip */ /* The BF561-EZKIT uses a top boot flash */ #define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR 0x20004000 -#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE) +#define CONFIG_ENV_OFFSET 0x4000 +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET) #define CONFIG_ENV_SIZE 0x2000 #define CONFIG_ENV_SECT_SIZE 0x10000 /* Total Size of Environment Sector */ #if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS) diff --git a/include/configs/igep0020.h b/include/configs/igep0020.h index c19ecc0..5af9bec 100644 --- a/include/configs/igep0020.h +++ b/include/configs/igep0020.h @@ -53,6 +53,8 @@ #define CONFIG_INITRD_TAG 1 #define CONFIG_REVISION_TAG 1 +#define CONFIG_OF_LIBFDT 1 + /* * NS16550 Configuration */ @@ -129,14 +131,61 @@ */ #define CONFIG_TWL4030_POWER 1 -/* Environment information */ -#define CONFIG_BOOTCOMMAND \ - "mmc init 0 ; fatload mmc 0 0x80000000 setup.ini ; source \0" - #define CONFIG_BOOTDELAY 3 #define CONFIG_EXTRA_ENV_SETTINGS \ - "usbtty=cdc_acm\0" + "usbtty=cdc_acm\0" \ + "loadaddr=0x82000000\0" \ + "usbtty=cdc_acm\0" \ + "console=ttyS2,115200n8\0" \ + "mpurate=500\0" \ + "vram=12M\0" \ + "dvimode=1024x768MR-16@60\0" \ + "defaultdisplay=dvi\0" \ + "mmcdev=0\0" \ + "mmcroot=/dev/mmcblk0p2 rw\0" \ + "mmcrootfstype=ext3 rootwait\0" \ + "nandroot=/dev/mtdblock4 rw\0" \ + "nandrootfstype=jffs2\0" \ + "mmcargs=setenv bootargs console=${console} " \ + "mpurate=${mpurate} " \ + "vram=${vram} " \ + "omapfb.mode=dvi:${dvimode} " \ + "omapfb.debug=y " \ + "omapdss.def_disp=${defaultdisplay} " \ + "root=${mmcroot} " \ + "rootfstype=${mmcrootfstype}\0" \ + "nandargs=setenv bootargs console=${console} " \ + "mpurate=${mpurate} " \ + "vram=${vram} " \ + "omapfb.mode=dvi:${dvimode} " \ + "omapfb.debug=y " \ + "omapdss.def_disp=${defaultdisplay} " \ + "root=${nandroot} " \ + "rootfstype=${nandrootfstype}\0" \ + "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ + "bootscript=echo Running bootscript from mmc ...; " \ + "source ${loadaddr}\0" \ + "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ + "mmcboot=echo Booting from mmc ...; " \ + "run mmcargs; " \ + "bootm ${loadaddr}\0" \ + "nandboot=echo Booting from onenand ...; " \ + "run nandargs; " \ + "onenand read ${loadaddr} 280000 400000; " \ + "bootm ${loadaddr}\0" \ + +#define CONFIG_BOOTCOMMAND \ + "if mmc rescan ${mmcdev}; then " \ + "if run loadbootscript; then " \ + "run bootscript; " \ + "else " \ + "if run loaduimage; then " \ + "run mmcboot; " \ + "else run nandboot; " \ + "fi; " \ + "fi; " \ + "else run nandboot; fi" #define CONFIG_AUTO_COMPLETE 1 diff --git a/include/configs/igep0030.h b/include/configs/igep0030.h index 1325bfa..92144af 100644 --- a/include/configs/igep0030.h +++ b/include/configs/igep0030.h @@ -53,6 +53,8 @@ #define CONFIG_INITRD_TAG 1 #define CONFIG_REVISION_TAG 1 +#define CONFIG_OF_LIBFDT 1 + /* * NS16550 Configuration */ @@ -127,14 +129,61 @@ */ #define CONFIG_TWL4030_POWER 1 -/* Environment information */ -#define CONFIG_BOOTCOMMAND \ - "mmc init 0 ; fatload mmc 0 0x80000000 setup.ini ; source \0" - #define CONFIG_BOOTDELAY 3 #define CONFIG_EXTRA_ENV_SETTINGS \ - "usbtty=cdc_acm\0" + "usbtty=cdc_acm\0" \ + "loadaddr=0x82000000\0" \ + "usbtty=cdc_acm\0" \ + "console=ttyS2,115200n8\0" \ + "mpurate=500\0" \ + "vram=12M\0" \ + "dvimode=1024x768MR-16@60\0" \ + "defaultdisplay=dvi\0" \ + "mmcdev=0\0" \ + "mmcroot=/dev/mmcblk0p2 rw\0" \ + "mmcrootfstype=ext3 rootwait\0" \ + "nandroot=/dev/mtdblock4 rw\0" \ + "nandrootfstype=jffs2\0" \ + "mmcargs=setenv bootargs console=${console} " \ + "mpurate=${mpurate} " \ + "vram=${vram} " \ + "omapfb.mode=dvi:${dvimode} " \ + "omapfb.debug=y " \ + "omapdss.def_disp=${defaultdisplay} " \ + "root=${mmcroot} " \ + "rootfstype=${mmcrootfstype}\0" \ + "nandargs=setenv bootargs console=${console} " \ + "mpurate=${mpurate} " \ + "vram=${vram} " \ + "omapfb.mode=dvi:${dvimode} " \ + "omapfb.debug=y " \ + "omapdss.def_disp=${defaultdisplay} " \ + "root=${nandroot} " \ + "rootfstype=${nandrootfstype}\0" \ + "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ + "bootscript=echo Running bootscript from mmc ...; " \ + "source ${loadaddr}\0" \ + "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ + "mmcboot=echo Booting from mmc ...; " \ + "run mmcargs; " \ + "bootm ${loadaddr}\0" \ + "nandboot=echo Booting from onenand ...; " \ + "run nandargs; " \ + "onenand read ${loadaddr} 280000 400000; " \ + "bootm ${loadaddr}\0" \ + +#define CONFIG_BOOTCOMMAND \ + "if mmc rescan ${mmcdev}; then " \ + "if run loadbootscript; then " \ + "run bootscript; " \ + "else " \ + "if run loaduimage; then " \ + "run mmcboot; " \ + "else run nandboot; " \ + "fi; " \ + "fi; " \ + "else run nandboot; fi" #define CONFIG_AUTO_COMPLETE 1 diff --git a/include/configs/imx31_litekit.h b/include/configs/imx31_litekit.h index 5023638..9405f56 100644 --- a/include/configs/imx31_litekit.h +++ b/include/configs/imx31_litekit.h @@ -28,7 +28,7 @@ #ifndef __CONFIG_H #define __CONFIG_H -#include <asm/arch/mx31-regs.h> +#include <asm/arch/imx-regs.h> /* High Level Configuration Options */ #define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */ diff --git a/include/configs/innokom.h b/include/configs/innokom.h index d8fcbdb..744d65c 100644 --- a/include/configs/innokom.h +++ b/include/configs/innokom.h @@ -140,6 +140,8 @@ /* * I2C bus */ +#define CONFIG_I2C_MV 1 +#define CONFIG_MV_I2C_REG 0x40301680 #define CONFIG_HARD_I2C 1 #define CONFIG_SYS_I2C_SPEED 50000 #define CONFIG_SYS_I2C_SLAVE 0xfe diff --git a/include/configs/ip04.h b/include/configs/ip04.h index 528363c..c024d78 100644 --- a/include/configs/ip04.h +++ b/include/configs/ip04.h @@ -20,6 +20,7 @@ /* * Processor Settings */ +#define CONFIG_BFIN_CPU bf532-0.5 #define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_NAND diff --git a/include/configs/keymile-common.h b/include/configs/keymile-common.h index e3bd264..cb6d0fb 100644 --- a/include/configs/keymile-common.h +++ b/include/configs/keymile-common.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2008 + * (C) Copyright 2008-2011 * Heiko Schocher, DENX Software Engineering, hs@denx.de. * * See file CREDITS for list of people who contributed to this @@ -25,7 +25,8 @@ #define __CONFIG_KEYMILE_H /* Do boardspecific init for all boards */ -#define CONFIG_BOARD_EARLY_INIT_R 1 +#define CONFIG_BOARD_EARLY_INIT_R +#define CONFIG_LAST_STAGE_INIT #define CONFIG_BOOTCOUNT_LIMIT @@ -39,13 +40,6 @@ #endif /* CONFIG_SYS_KWD_CONFIG */ /* - * CONFIG_SYS_TEXT_BASE can be defined in board specific header file, if needed - */ -#ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0x00400000 -#endif /* CONFIG_SYS_TEXT_BASE */ - -/* * Command line configuration. */ #include <config_cmd_default.h> @@ -56,51 +50,46 @@ #define CONFIG_CMD_IMMAP #define CONFIG_CMD_MII #define CONFIG_CMD_PING -#define CONFIG_CMD_DTT #define CONFIG_CMD_EEPROM #define CONFIG_CMD_I2C #define CONFIG_CMD_JFFS2 -#define CONFIG_JFFS2_CMDLINE #define CONFIG_CMD_MTDPARTS +#define CONFIG_CMD_SETEXPR -#undef CONFIG_WATCHDOG /* disable platform specific watchdog */ +#undef CONFIG_WATCHDOG /* disable platform specific watchdog */ -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ +#define CONFIG_BOOTDELAY 2 /* autoboot after 2 seconds */ +#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ /* * Miscellaneous configurable options */ #define CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ #endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ -#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) +#define CONFIG_SYS_MAXARGS 32 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +#define CONFIG_CMDLINE_EDITING +#define CONFIG_AUTO_COMPLETE -#define CONFIG_HUSH_INIT_VAR 1 +#define CONFIG_HUSH_INIT_VAR #define CONFIG_SYS_ALT_MEMTEST /* memory test, takes time */ -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CONFIG_SYS_HZ 1000 /* decr. freq: 1 ms ticks */ -#define CONFIG_BAUDRATE 115200 +#define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ +#define CONFIG_LOADS_ECHO +#define CONFIG_SYS_LOADS_BAUD_CHANGE #define CONFIG_SYS_BOARD_DRAM_INIT /* Used board specific dram_init */ /* @@ -108,28 +97,28 @@ * to modify in a centralized location. This is used in the HDLC * driver to set the MAC. */ -#define CONFIG_CHECK_ETHERNET_PRESENT 1 -#define CONFIG_SYS_SLOT_ID_BASE CONFIG_SYS_PIGGY_BASE +#define CONFIG_CHECK_ETHERNET_PRESENT +#define CONFIG_SYS_SLOT_ID_BASE CONFIG_SYS_KMBEC_FPGA_BASE #define CONFIG_SYS_SLOT_ID_OFF (0x07) /* register offset */ #define CONFIG_SYS_SLOT_ID_MASK (0x3f) /* mask for slot ID bits */ -#define CONFIG_I2C_MULTI_BUS 1 +#define CONFIG_I2C_MULTI_BUS #define CONFIG_SYS_MAX_I2C_BUS 1 -#define CONFIG_SYS_I2C_INIT_BOARD 1 -#define CONFIG_I2C_MUX 1 +#define CONFIG_SYS_I2C_INIT_BOARD +#define CONFIG_I2C_MUX /* EEprom support */ -#define CONFIG_SYS_I2C_MULTI_EEPROMS 1 +#define CONFIG_SYS_I2C_MULTI_EEPROMS #define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* Support the IVM EEprom */ #define CONFIG_SYS_IVM_EEPROM_ADR 0x50 #define CONFIG_SYS_IVM_EEPROM_MAX_LEN 0x400 #define CONFIG_SYS_IVM_EEPROM_PAGE_LEN 0x100 -#define CONFIG_SYS_FLASH_PROTECTION 1 +#define CONFIG_SYS_FLASH_PROTECTION /* * BOOTP options @@ -139,139 +128,325 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME -#define CONFIG_ENV_SIZE 0x04000 /* Size of Environment */ - -#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) +#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) /* UBI Support for all Keymile boards */ #define CONFIG_CMD_UBI #define CONFIG_RBTREE #define CONFIG_MTD_PARTITIONS -#define CONFIG_FLASH_CFI_MTD #define CONFIG_MTD_DEVICE #define CONFIG_MTD_CONCAT -/* define this to use the keymile's io muxing feature */ -/*#define CONFIG_IO_MUXING */ - -#ifdef CONFIG_IO_MUXING -#define CONFIG_KM_DEF_ENV_IOMUX \ - "nc=setenv ethact HDLC \0" \ - "nce=setenv ethact SCC \0" \ - "stderr=serial,nc \0" \ - "stdin=serial,nc \0" \ - "stdout=serial,nc \0" \ - "tftpsrcp=69 \0" \ - "tftpdstp=69 \0" -#else -#define CONFIG_KM_DEF_ENV_IOMUX \ - "stderr=serial \0" \ - "stdin=serial \0" \ - "stdout=serial \0" +/* common powerpc specific env settings */ +#ifndef CONFIG_KM_DEF_ENV_BOOTPARAMS +#define CONFIG_KM_DEF_ENV_BOOTPARAMS \ + "bootparams=empty\0" \ + "initial_boot_bank=0\0" #endif -#ifndef CONFIG_KM_DEF_ENV_PRIVATE -#define CONFIG_KM_DEF_ENV_PRIVATE \ - "kmprivate=empty\0" +#ifndef CONFIG_KM_DEF_NETDEV +#define CONFIG_KM_DEF_NETDEV \ + "netdev=eth0\0" +#endif + +#ifndef CONFIG_KM_UBI_PARTITION_NAME +#define CONFIG_KM_UBI_PARTITION_NAME "ubi0" +#endif +#ifndef CONFIG_KM_UBI_LINUX_MTD_NAME +#define CONFIG_KM_UBI_LINUX_MTD_NAME "ubi0" #endif #define xstr(s) str(s) #define str(s) #s +/* + * bootrunner + * - run all commands in 'subbootcmds' + * - on error, stop running the remaing commands + */ +#define CONFIG_KM_DEF_ENV_BOOTRUNNER \ + "bootrunner=" \ + "break=0; " \ + "for subbootcmd in ${subbootcmds}; do " \ + "if test ${break} -eq 0; then; " \ + "echo \"[INFO] running \\c\"; " \ + "print ${subbootcmd}; " \ + "run ${subbootcmd} || break=1; " \ + "if test ${break} -eq 1; then; " \ + "echo \"[ERR] failed \\c\"; " \ + "print ${subbootcmd}; " \ + "fi; " \ + "fi; " \ + "done\0" \ + "" + +/* + * boottargets + * - set 'subbootcmds' for the bootrunner + * - set 'bootcmd' and 'altbootcmd' + * available targets: + * - 'release': for a standalone system kernel/rootfs from flash + * - 'develop': for development kernel(tftp)/rootfs(NFS) + * - 'ramfs': rootfilesystem in RAM kernel(tftp)/rootfs(RAM) + * + * - 'commonargs': bootargs common to all targets + */ +#define CONFIG_KM_DEF_ENV_BOOTTARGETS \ + "commonargs=" \ + "addip " \ + "addtty " \ + "addmem " \ + "addinit " \ + "addvar " \ + "addmtdparts " \ + "addbootcount " \ + "\0" \ + "develop=" \ + "setenv subbootcmds \"" \ + "tftpfdt tftpkernel " \ + "nfsargs ${commonargs} " \ + "printbootargs boot " \ + "\" && " \ + "setenv bootcmd \'" \ + "run bootrunner" \ + "\' && " \ + "setenv altbootcmd \'" \ + "run bootcmd" \ + "\' && " \ + "run setboardid && " \ + "saveenv && " \ + "reset\0" \ + "ramfs=" \ + "setenv actual_bank -1 && " \ + "setenv subbootcmds \"" \ + "tftpfdt tftpkernel " \ + "setrootfsaddr tftpramfs " \ + "flashargs ${commonargs} " \ + "addpanic addramfs " \ + "printbootargs boot " \ + "\" && " \ + "setenv bootcmd \'" \ + "run bootrunner" \ + "\' && " \ + "setenv altbootcmd \'" \ + "run bootcmd" \ + "\' && " \ + "run setboardid && " \ + "run setramfspram && " \ + "saveenv && " \ + "reset\0" \ + "release=" \ + "setenv actual_bank ${initial_boot_bank} && " \ + "setenv subbootcmds \"" \ + "checkboardidlist " \ + "checkboardid " \ + "ubiattach ubicopy " \ + "cramfsloadfdt cramfsloadkernel " \ + "flashargs ${commonargs} " \ + "addpanic " \ + "printbootargs boot " \ + "\" && " \ + "setenv bootcmd \'" \ + "run bootrunner; reset" \ + "\' && " \ + "setenv altbootcmd \'" \ + "run actual0 bootcmd; reset" \ + "\' && " \ + "saveenv && " \ + "reset\0" \ + "" + +/* + * bootargs + * - modify 'bootargs' + * + * - 'addip': add ip configuration + * - 'addmem': limit kernel memory mem= + * - 'addpanic': add kernel panic options + * - 'addramfs': add phram device for the rootfilesysten in ram + * - 'addtty': add console=... + * - 'addvar': add phram device for /var + * - 'nfsargs': default arguments for nfs boot + * - 'flashargs': defaults arguments for flash base boot + * + * processor specific settings + * - 'addbootcount': add boot counter + * - 'addmtdparts': add mtd partition information + */ +#define CONFIG_KM_DEF_ENV_BOOTARGS \ + "addinit=" \ + "setenv bootargs ${bootargs} init=${init}\0" \ + "addip=" \ + "setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off\0" \ + "addmem=" \ + "setenv bootargs ${bootargs} mem=0x${pnvramaddr}\0" \ + "addpanic=" \ + "setenv bootargs ${bootargs} " \ + "panic=1 panic_on_oops=1\0" \ + "addramfs=" \ + "setenv bootargs \"" \ + "${bootargs} phram.phram=" \ + "rootfs${actual_bank},${rootfsaddr},${rootfssize}\"\0" \ + "addtty=" \ + "setenv bootargs ${bootargs}" \ + " console=" CONFIG_KM_CONSOLE_TTY ",${baudrate}\0" \ + "addvar=" \ + "setenv bootargs ${bootargs} phram.phram=phvar," \ + "${varaddr},0x" xstr(CONFIG_KM_PHRAM) "\0" \ + "nfsargs=" \ + "setenv bootargs " \ + "ubi.mtd=" CONFIG_KM_UBI_LINUX_MTD_NAME " " \ + "root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "flashargs=" \ + "setenv bootargs " \ + "ubi.mtd=" CONFIG_KM_UBI_LINUX_MTD_NAME " " \ + "root=mtdblock:rootfs${actual_bank} " \ + "rootfstype=squashfs ro\0" \ + "" + +/* + * compute_addr + * - compute addresses and sizes + * - addresses are calculated form the end of memory 'memsize' + * + * - 'setramfspram': compute PRAM size for ramfs target + * - 'setrootfsaddr': compute rootfilesystem address for phram + */ +#define CONFIG_KM_DEF_ENV_COMPUTE_ADDR \ + "setboardid=" \ + "if test \"x${boardId}\" = \"x\"; then; " \ + "setenv boardId ${IVM_BoardId} && " \ + "setenv hwKey ${IVM_HWKey}; " \ + "else; " \ + "echo \\\\c; " \ + "fi\0" \ + "setramfspram=" \ + "setexpr value ${rootfssize} / 0x400 && " \ + "setexpr value 0x${value} + ${pram} && " \ + "setenv pram 0x${value}\0" \ + "setrootfsaddr=" \ + "setexpr value ${pnvramaddr} - ${rootfssize} && " \ + "setenv rootfsaddr 0x${value}\0" \ + "" + +/* + * flash_boot + * - commands for booting from flash + * + * - 'cramfsaddr': address to the cramfs (in ram) + * - 'cramfsloadkernel': copy kernel from a cramfs to ram + * - 'ubiattach': attach ubi partition + * - 'ubicopy': copy ubi volume to ram + * - volume names: bootfs0, bootfs1, bootfs2, ... + * - 'ubiparition': mtd parition name for ubi + * + * processor specific settings + * - 'cramfsloadfdt': copy fdt from a cramfs to ram + */ +#define CONFIG_KM_DEF_ENV_FLASH_BOOT \ + "cramfsaddr="xstr(CONFIG_KM_CRAMFS_ADDR) "\0" \ + "cramfsloadkernel=" \ + "cramfsload ${kernel_addr_r} uImage && " \ + "setenv actual_kernel_addr ${kernel_addr_r}\0" \ + "ubiattach=ubi part ${ubipartition}\0" \ + "ubicopy=ubi read ${cramfsaddr} bootfs${actual_bank}\0" \ + "ubipartition=" CONFIG_KM_UBI_PARTITION_NAME "\0" \ + "" + +/* + * net_boot + * - commands for booting over the network + * + * - 'tftpkernel': load a kernel with tftp into ram + * - 'tftpramfs': load rootfs with tftp into ram + * + * processor specific settings + * - 'tftpfdt': load fdt with tftp into ram + */ +#define CONFIG_KM_DEF_ENV_NET_BOOT \ + "tftpkernel=" \ + "tftpboot ${kernel_addr_r} ${kernel_file} && " \ + "setenv actual_kernel_addr ${kernel_addr_r}\0" \ + "tftpramfs=" \ + "tftpboot ${rootfsaddr} \"\\\"${rootfsfile}\\\"\" && " \ + "setenv loadaddr\0" \ + "" + +/* + * constants + * - KM specific constants and commands + * + * - 'default': setup default environment + */ +#define CONFIG_KM_DEF_ENV_CONSTANTS \ + "actual=setenv actual_bank ${initial_boot_bank}\0" \ + "actual0=setenv actual_bank 0\0" \ + "actual_bank=${initial_boot_bank}\0" \ + "default=" \ + "setenv default 'run newenv; reset' && " \ + "run release && saveenv; reset\0" \ + "checkboardidlist=" \ + "if test \"x${boardIdListHex}\" != \"x\"; then " \ + "IVMbidhwk=${IVM_BoardId}_${IVM_HWKey}; " \ + "found=0; " \ + "for bidhwk in \"${boardIdListHex}\"; do " \ + "echo trying $bidhwk ...; " \ + "if test \"x$bidhwk\" = \"x$IVMbidhwk\"; then " \ + "found=1; " \ + "echo match found for $bidhwk; " \ + "if test \"x$bidhwk\" != \"x${boardId}_${hwKey}\";then "\ + "setenv boardid ${IVM_BoardId}; " \ + "setenv boardId ${IVM_BoardId}; " \ + "setenv hwkey ${IVM_HWKey}; " \ + "setenv hwKey ${IVM_HWKey}; " \ + "echo \"boardId set to ${boardId}\"; " \ + "echo \"hwKey set to ${hwKey}\"; " \ + "saveenv; " \ + "fi; " \ + "fi; " \ + "done; " \ + "else " \ + "echo \"boardIdListHex not set, not checked\"; "\ + "found=1; " \ + "fi; " \ + "test \"$found\" = 1 \0" \ + "checkboardid=" \ + "test \"x${boardId}\" = \"x${IVM_BoardId}\" && " \ + "test \"x${hwKey}\" = \"x${IVM_HWKey}\"\0" \ + "printbootargs=print bootargs\0" \ + "rootfsfile="xstr(CONFIG_HOSTNAME) "/rootfsImage\0" \ + "" + #ifndef CONFIG_KM_DEF_ENV #define CONFIG_KM_DEF_ENV \ - "netdev=eth0\0" \ - "u-boot_addr_r=100000\0" \ - "kernel_addr_r=200000\0" \ - "fdt_addr_r=600000\0" \ - "ram_ws=800000 \0" \ - "script_ws=780000 \0" \ - "fdt_file=" xstr(CONFIG_HOSTNAME) "/" \ - xstr(CONFIG_HOSTNAME) ".dtb\0" \ - "u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.bin \0" \ - "kernel_file=" xstr(CONFIG_HOSTNAME) "/uImage \0" \ - "load=tftp ${u-boot_addr_r} ${u-boot}\0" \ - "update=protect off " xstr(BOOTFLASH_START) " +${filesize};" \ - "erase " xstr(BOOTFLASH_START) " +${filesize};" \ - "cp.b ${u-boot_addr_r} " xstr(BOOTFLASH_START) \ - " ${filesize};" \ - "protect on " xstr(BOOTFLASH_START) " +${filesize}\0" \ - "load_fdt=tftp ${fdt_addr_r} ${fdt_file}; " \ - "setenv actual_fdt_addr ${fdt_addr_r} \0" \ - "load_kernel=tftp ${kernel_addr_r} ${kernel_file}; " \ - "setenv actual_kernel_addr ${kernel_addr_r} \0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "mtdargs=setenv bootargs root=${actual_rootfs} rw " \ - "rootfstype=jffs2 \0" \ - "altmtdargs=setenv bootargs root=${backup_rootfs} rw " \ - "rootfstype=jffs2 \0" \ - "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "addboardid=setenv bootargs ${bootargs} " \ - "hwKey=${IVM_HWKey} boardId=0x${IVM_BoardId} \0" \ - "addpram=setenv bootargs ${bootargs} " \ - "mem=${mem} pram=${pram}\0" \ - "pram=" xstr(CONFIG_PRAM) "k\0" \ - "net_nfs=tftp ${kernel_addr_r} ${kernel_file}; " \ - "tftp ${fdt_addr_r} ${fdt_file}; " \ - "run nfsargs addip addcon addboardid addpram;" \ - "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \ - "net_self=tftp ${kernel_addr_r} ${kernel_file}; " \ - "tftp ${fdt_addr_r} ${fdt_file}; " \ - "tftp ${ramdisk_addr} ${ramdisk_file}; " \ - "run ramargs addip addboardid addpram; " \ - "bootm ${kernel_addr_r} ${ramdisk_addr} ${fdt_addr_r}\0"\ - "flash_nfs=run nfsargs addip addcon;" \ - "bootm ${kernel_addr} - ${fdt_addr}\0" \ - "flash_self=run ramargs addip addcon addboardid addpram;" \ - "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ - "bootcmd=run mtdargs addip addcon addboardid addpram; " \ - "bootm ${actual_kernel_addr} - ${actual_fdt_addr} \0" \ - "altbootcmd=run altmtdargs addip addcon addboardid addpram; " \ - "bootm ${backup_kernel_addr} - ${backup_fdt_addr} \0" \ - "actual0=setenv actual_bank 0; setenv actual_kernel_addr " \ - "${bank0_kernel_addr}; " \ - "setenv actual_fdt_addr ${bank0_fdt_addr}; " \ - "setenv actual_rootfs ${bank0_rootfs} \0" \ - "actual1=setenv actual_bank 1; setenv actual_kernel_addr " \ - "${bank1_kernel_addr}; " \ - "setenv actual_fdt_addr ${bank1_fdt_addr}; " \ - "setenv actual_rootfs ${bank1_rootfs} \0" \ - "backup0=setenv backup_bank 0; setenv backup_kernel_addr " \ - "${bank0_kernel_addr}; " \ - "setenv backup_fdt_addr ${bank0_fdt_addr}; " \ - "setenv backup_rootfs ${bank0_rootfs} \0" \ - "backup1=setenv backup_bank 1; setenv backup_kernel_addr " \ - "${bank1_kernel_addr}; " \ - "setenv backup_fdt_addr ${bank1_fdt_addr}; " \ - "setenv backup_rootfs ${bank1_rootfs} \0" \ - "setbank0=run actual0 backup1 \0" \ - "setbank1=run actual1 backup0 \0" \ - "release=setenv bootcmd " \ - "\'run mtdargs addip addcon addboardid addpram;" \ - "bootm ${actual_kernel_addr} - ${actual_fdt_addr} \'; " \ - "saveenv \0" \ - "develop=setenv bootcmd " \ - "\'run nfsargs addip addcon addboardid addpram;" \ - "bootm ${actual_kernel_addr} - ${actual_fdt_addr} \'; " \ - "saveenv \0" \ - "developall=setenv bootcmd " \ - "\'run load_fdt load_kernel nfsargs " \ - "addip addcon addboardid addpram; " \ - "bootm ${actual_kernel_addr} - ${actual_fdt_addr} \'; " \ - "saveenv \0" \ - "set_new_esw_script=setenv new_esw_script " \ - "new_esw_0x${IVM_BoardId}_0x${IVM_HWKey}.scr \0" \ - "new_esw=run set_new_esw_script; " \ - "tftp ${script_ws} ${new_esw_script}; " \ - "iminfo ${script_ws}; source ${script_ws} \0" \ - "bootlimit=0 \0" \ - CONFIG_KM_DEF_ENV_IOMUX \ - CONFIG_KM_DEF_ENV_PRIVATE \ + CONFIG_KM_DEF_ENV_BOOTPARAMS \ + CONFIG_KM_DEF_NETDEV \ + CONFIG_KM_DEF_ENV_CPU \ + CONFIG_KM_DEF_ENV_BOOTRUNNER \ + CONFIG_KM_DEF_ENV_BOOTTARGETS \ + CONFIG_KM_DEF_ENV_BOOTARGS \ + CONFIG_KM_DEF_ENV_COMPUTE_ADDR \ + CONFIG_KM_DEF_ENV_FLASH_BOOT \ + CONFIG_KM_DEF_ENV_NET_BOOT \ + CONFIG_KM_DEF_ENV_CONSTANTS \ + "altbootcmd=run bootcmd\0" \ + "bootcmd=run default\0" \ + "bootlimit=2\0" \ + "init=/sbin/init-overlay.sh\0" \ + "kernel_addr_r="xstr(CONFIG_KM_KERNEL_ADDR) "\0" \ + "kernel_file="xstr(CONFIG_HOSTNAME) "/uImage\0" \ + "kernel_name=uImage\0" \ + "load=tftpboot ${u-boot_addr_r} ${u-boot}\0" \ + "mtdids=" MTDIDS_DEFAULT "\0" \ + "mtdparts=" MTDPARTS_DEFAULT "\0" \ + "stderr=serial\0" \ + "stdin=serial\0" \ + "stdout=serial\0" \ + "u-boot="xstr(CONFIG_HOSTNAME) "/u-boot.bin\0" \ + "u-boot_addr_r="xstr(CONFIG_KM_KERNEL_ADDR) "\0" \ "" #endif /* CONFIG_KM_DEF_ENV */ diff --git a/include/configs/km-powerpc.h b/include/configs/km-powerpc.h new file mode 100644 index 0000000..3351609 --- /dev/null +++ b/include/configs/km-powerpc.h @@ -0,0 +1,92 @@ +/* + * (C) Copyright 2011 + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_KEYMILE_POWERPC_H +#define __CONFIG_KEYMILE_POWERPC_H + +#define CONFIG_BOOTCOUNT_LIMIT + +#define CONFIG_CMD_DTT +#define CONFIG_JFFS2_CMDLINE + +#define CONFIG_ENV_SIZE 0x04000 /* Size of Environment */ +#define CONFIG_FLASH_CFI_MTD + +#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ + +#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ + +#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ + +/****************************************************************************** + * (PRAM usage) + * ... ------------------------------------------------------- + * ... |ROOTFSSIZE | PNVRAM |PHRAM |RESERVED_PRAM | END_OF_RAM + * ... |<------------------- pram -------------------------->| + * ... ------------------------------------------------------- + * @END_OF_RAM: + * @CONFIG_KM_RESERVED_PRAM: reserved pram for special purpose + * @CONFIG_KM_PHRAM: address for /var + * @CONFIG_KM_PNVRAM: address for PNVRAM (for the application) + * @CONFIG_KM_ROOTFSSIZE: address for rootfilesystem in RAM + */ + +/* size of rootfs in RAM */ +#define CONFIG_KM_ROOTFSSIZE 0x0 +/* pseudo-non volatile RAM [hex] */ +#define CONFIG_KM_PNVRAM 0x80000 +/* physical RAM MTD size [hex] */ +#define CONFIG_KM_PHRAM 0x100000 +/* resereved pram area at the end of memroy [hex] */ +#define CONFIG_KM_RESERVED_PRAM 0x0 +/* enable protected RAM */ +#define CONFIG_PRAM 0 + +#define CONFIG_KM_CRAMFS_ADDR 0x800000 +#define CONFIG_KM_KERNEL_ADDR 0x400000 /* 3968Kbytes */ +#define CONFIG_KM_FDT_ADDR 0x7E0000 /* 128Kbytes */ + +#define CONFIG_KM_DEF_ENV_CPU \ + "addbootcount=echo \\\\c\0" \ + "addmtdparts=echo \\\\c\0" \ + "boot=bootm ${actual_kernel_addr} - ${actual_fdt_addr}\0" \ + "cramfsloadfdt=" \ + "cramfsload ${fdt_addr_r} " \ + "fdt_0x${IVM_BoardId}_0x${IVM_HWKey}.dtb && " \ + "setenv actual_fdt_addr ${fdt_addr_r}\0" \ + "fdt_addr_r=" xstr(CONFIG_KM_FDT_ADDR) "\0" \ + "fdt_file=" \ + xstr(CONFIG_HOSTNAME) "/" \ + xstr(CONFIG_HOSTNAME) ".dtb\0" \ + "tftpfdt=" \ + "tftpboot ${fdt_addr_r} ${fdt_file} && " \ + "setenv actual_fdt_addr ${fdt_addr_r} \0" \ + "update=" \ + "protect off " xstr(BOOTFLASH_START) " +${filesize} && "\ + "erase " xstr(BOOTFLASH_START) " +${filesize} && " \ + "cp.b ${u-boot_addr_r} " xstr(BOOTFLASH_START) \ + " ${filesize} && " \ + "protect on " xstr(BOOTFLASH_START) " +${filesize}\0" \ + "" + +#endif /* __CONFIG_KEYMILE_POWERPC_H */ diff --git a/include/configs/km82xx-common.h b/include/configs/km82xx-common.h new file mode 100644 index 0000000..345212c --- /dev/null +++ b/include/configs/km82xx-common.h @@ -0,0 +1,336 @@ +/* + * (C) Copyright 2007-2010 + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __KM82XX_COMMON +#define __KM82XX_COMMON + +/* + * Select serial console configuration + * + * If either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then + * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4 + * for SCC). + */ +#define CONFIG_CONS_ON_SMC /* Console is on SMC */ +#undef CONFIG_CONS_ON_SCC /* It's not on SCC */ +#undef CONFIG_CONS_NONE /* It's not on external UART */ +#define CONFIG_CONS_INDEX 2 /* SMC2 is used for console */ +#define CONFIG_SYS_SMC_RXBUFLEN 128 +#define CONFIG_SYS_MAXIDLE 10 + +/* + * Select ethernet configuration + * + * If either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, + * then CONFIG_ETHER_INDEX must be set to the channel number (1-4 for + * SCC, 1-3 for FCC) + * + * If CONFIG_ETHER_NONE is defined, then either the ethernet routines + * must be defined elsewhere (as for the console), or CONFIG_CMD_NET + * must be unset. + */ +#define CONFIG_ETHER_ON_SCC /* Ethernet is on SCC */ +#undef CONFIG_ETHER_ON_FCC /* Ethernet is not on FCC */ +#undef CONFIG_ETHER_NONE /* No external Ethernet */ +#define CONFIG_NET_MULTI + +#define CONFIG_ETHER_INDEX 4 +#define CONFIG_HAS_ETH0 +#define CONFIG_SYS_SCC_TOUT_LOOP 10000000 + +#define CONFIG_SYS_CMXSCR_VALUE (CMXSCR_RS4CS_CLK7 | CMXSCR_TS4CS_CLK8) + +#ifndef CONFIG_8260_CLKIN +#define CONFIG_8260_CLKIN 66000000 /* in Hz */ +#endif + +#define BOOTFLASH_START 0xFE000000 + +#define CONFIG_KM_CONSOLE_TTY "ttyCPM0" + +#define MTDPARTS_DEFAULT "mtdparts=" \ + "app:" \ + "768k(u-boot)," \ + "128k(env)," \ + "128k(envred)," \ + "3072k(free)," \ + "-(" CONFIG_KM_UBI_PARTITION_NAME ")" + +/* + * Default environment settings + */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + CONFIG_KM_DEF_ENV \ + "EEprom_ivm=pca9544a:70:4 \0" \ + "unlock=yes\0" \ + "newenv=" \ + "prot off 0xFE0C0000 +0x40000 && " \ + "era 0xFE0C0000 +0x40000\0" \ + "rootpath=/opt/eldk/ppc_82xx\0" \ + "" + +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE +#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) +#define CONFIG_SYS_RAMBOOT +#endif + +#define CONFIG_SYS_MONITOR_LEN (768 << 10) + +#define CONFIG_ENV_IS_IN_FLASH + +#ifdef CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_SECT_SIZE 0x20000 +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \ + CONFIG_SYS_MONITOR_LEN) +#define CONFIG_ENV_OFFSET CONFIG_SYS_MONITOR_LEN + +/* Address and size of Redundant Environment Sector */ +#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \ + CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) +#endif /* CONFIG_ENV_IS_IN_FLASH */ + +/* enable I2C and select the hardware/software driver */ +#undef CONFIG_HARD_I2C /* I2C with hardware support */ +#define CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CONFIG_SYS_I2C_SPEED 50000 /* I2C speed */ +#define CONFIG_SYS_I2C_SLAVE 0x7F /* I2C slave address */ + +/* + * Software (bit-bang) I2C driver configuration + */ + +#define I2C_PORT 3 /* Port A=0, B=1, C=2, D=3 */ +#define I2C_ACTIVE (iop->pdir |= 0x00010000) +#define I2C_TRISTATE (iop->pdir &= ~0x00010000) +#define I2C_READ ((iop->pdat & 0x00010000) != 0) +#define I2C_SDA(bit) do { \ + if (bit) \ + iop->pdat |= 0x00010000; \ + else \ + iop->pdat &= ~0x00010000; \ + } while (0) +#define I2C_SCL(bit) do { \ + if (bit) \ + iop->pdat |= 0x00020000; \ + else \ + iop->pdat &= ~0x00020000; \ + } while (0) +#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */ + +/* I2C SYSMON (LM75, AD7414 is almost compatible) */ +#define CONFIG_DTT_LM75 /* ON Semi's LM75 */ +#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */ +#define CONFIG_SYS_DTT_MAX_TEMP 70 +#define CONFIG_SYS_DTT_LOW_TEMP -30 +#define CONFIG_SYS_DTT_HYSTERESIS 3 +#define CONFIG_SYS_DTT_BUS_NUM (CONFIG_SYS_MAX_I2C_BUS) + +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 + +#define CONFIG_SYS_IMMR 0xF0000000 + +#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR +#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* used size in DPRAM */ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET + +/* Hard reset configuration word */ +#define CONFIG_SYS_HRCW_MASTER 0x0604b211 + +/* No slaves */ +#define CONFIG_SYS_HRCW_SLAVE1 0 +#define CONFIG_SYS_HRCW_SLAVE2 0 +#define CONFIG_SYS_HRCW_SLAVE3 0 +#define CONFIG_SYS_HRCW_SLAVE4 0 +#define CONFIG_SYS_HRCW_SLAVE5 0 +#define CONFIG_SYS_HRCW_SLAVE6 0 +#define CONFIG_SYS_HRCW_SLAVE7 0 + +/* Initial Memory map for Linux */ +#define CONFIG_SYS_BOOTMAPSZ (8 << 20) + +#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8260 CPUs */ +#if defined(CONFIG_CMD_KGDB) +# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +#define CONFIG_SYS_HID0_INIT 0 +#define CONFIG_SYS_HID0_FINAL (HID0_ICE | HID0_IFEM | HID0_ABE) + +#define CONFIG_SYS_HID2 0 + +#define CONFIG_SYS_SIUMCR 0x4020c200 +#define CONFIG_SYS_SYPCR 0xFFFFFFC3 +#define CONFIG_SYS_BCR 0x10000000 +#define CONFIG_SYS_SCCR (SCCR_PCI_MODE | SCCR_PCI_MODCK) + +/* + *----------------------------------------------------------------------- + * RMR - Reset Mode Register 5-5 + *----------------------------------------------------------------------- + * turn on Checkstop Reset Enable + */ +#define CONFIG_SYS_RMR 0 + +/* + *----------------------------------------------------------------------- + * TMCNTSC - Time Counter Status and Control 4-40 + *----------------------------------------------------------------------- + * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk, + * and enable Time Counter + */ +#define CONFIG_SYS_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE) + +/* + *----------------------------------------------------------------------- + * PISCR - Periodic Interrupt Status and Control 4-42 + *----------------------------------------------------------------------- + * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable + * Periodic timer + */ +#define CONFIG_SYS_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE) + +/* + *----------------------------------------------------------------------- + * RCCR - RISC Controller Configuration 13-7 + *----------------------------------------------------------------------- + */ +#define CONFIG_SYS_RCCR 0 + +/* + * Init Memory Controller: + * + * Bank Bus Machine PortSz Device + * ---- --- ------- ------ ------ + * 0 60x GPCM 8 bit FLASH + * 1 60x SDRAM 32 bit SDRAM + * 3 60x GPCM 8 bit GPIO/PIGGY + * 5 60x GPCM 16 bit CFG-Flash + * + */ +/* Bank 0 - FLASH + */ +#define CONFIG_SYS_BR0_PRELIM ((CONFIG_SYS_FLASH_BASE & BRx_BA_MSK) |\ + BRx_PS_8 |\ + BRx_MS_GPCM_P |\ + BRx_V) + +#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) |\ + ORxG_CSNT |\ + ORxG_ACS_DIV2 |\ + ORxG_SCY_5_CLK |\ + ORxG_TRLX) + + +/* + * Bank 1 - 60x bus SDRAM + */ +#define SDRAM_MAX_SIZE 0x08000000 /* max. 128 MB */ +#define CONFIG_SYS_GLOBAL_SDRAM_LIMIT (256 << 20) /* less than 256 MB */ + +#define CONFIG_SYS_MPTPR 0x1800 + +/* + *----------------------------------------------------------------------------- + * Address for Mode Register Set (MRS) command + *----------------------------------------------------------------------------- + */ +#define CONFIG_SYS_MRS_OFFS 0x00000110 +#define CONFIG_SYS_PSRT 0x0e + +#define CONFIG_SYS_BR1_PRELIM ((CONFIG_SYS_SDRAM_BASE & BRx_BA_MSK) |\ + BRx_PS_64 |\ + BRx_MS_SDRAM_P |\ + BRx_V) + +#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_OR1 + +/* + * SDRAM initialization values + */ + +#define CONFIG_SYS_OR1 ((~(CONFIG_SYS_GLOBAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\ + ORxS_BPD_8 |\ + ORxS_ROWST_PBI0_A7 |\ + ORxS_NUMR_13) + +#define CONFIG_SYS_PSDMR (PSDMR_SDAM_A14_IS_A5 |\ + PSDMR_BSMA_A14_A16 |\ + PSDMR_SDA10_PBI0_A9 |\ + PSDMR_RFRC_5_CLK |\ + PSDMR_PRETOACT_2W |\ + PSDMR_ACTTORW_2W |\ + PSDMR_LDOTOPRE_1C |\ + PSDMR_WRC_1C |\ + PSDMR_CL_2) + +/* + * UPIO FPGA (GPIO/PIGGY) on CS3 initialization values + */ +#define CONFIG_SYS_KMBEC_FPGA_BASE 0x30000000 +#define CONFIG_SYS_KMBEC_FPGA_SIZE 128 + +#define CONFIG_SYS_BR3_PRELIM ((CONFIG_SYS_KMBEC_FPGA_BASE & BRx_BA_MSK) |\ + BRx_PS_8 | BRx_MS_GPCM_P | BRx_V) + +#define CONFIG_SYS_OR3_PRELIM (MEG_TO_AM(CONFIG_SYS_KMBEC_FPGA_SIZE) |\ + ORxG_CSNT | ORxG_ACS_DIV2 |\ + ORxG_SCY_3_CLK | ORxG_TRLX) + +/* + * BFTICU board FPGA on CS4 initialization values + */ +#define CONFIG_SYS_FPGA_BASE 0x40000000 +#define CONFIG_SYS_FPGA_SIZE 1 /*1KB*/ + +#define CONFIG_SYS_BR4_PRELIM ((CONFIG_SYS_FPGA_BASE & BRx_BA_MSK) |\ + BRx_PS_8 | BRx_MS_GPCM_P | BRx_V) + +#define CONFIG_SYS_OR4_PRELIM (P2SZ_TO_AM(CONFIG_SYS_FPGA_SIZE << 10) |\ + ORxG_CSNT | ORxG_ACS_DIV2 |\ + ORxG_SCY_3_CLK | ORxG_TRLX) + +/* + * CFG-Flash on CS5 initialization values + */ +#define CONFIG_SYS_BR5_PRELIM ((CONFIG_SYS_FLASH_BASE_1 & BRx_BA_MSK) |\ + BRx_PS_16 | BRx_MS_GPCM_P | BRx_V) + +#define CONFIG_SYS_OR5_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE_1 + \ + CONFIG_SYS_FLASH_SIZE_2) |\ + ORxG_CSNT | ORxG_ACS_DIV2 |\ + ORxG_SCY_5_CLK | ORxG_TRLX) + +#define CONFIG_SYS_RESET_ADDRESS 0xFDFFFFFC /* "bad" address */ + +/* pass open firmware flat tree */ +#define CONFIG_FIT 1 +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 + +#define OF_TBCLK (bd->bi_busfreq / 4) +#define OF_STDOUT_PATH "/soc/cpm/serial@11a90" + +#endif /* __KM82XX_COMMON */ diff --git a/include/configs/km8321-common.h b/include/configs/km8321-common.h new file mode 100644 index 0000000..6fab45e --- /dev/null +++ b/include/configs/km8321-common.h @@ -0,0 +1,137 @@ +/* + * Copyright (C) 2006 Freescale Semiconductor, Inc. + * Dave Liu <daveliu@freescale.com> + * + * Copyright (C) 2007 Logic Product Development, Inc. + * Peter Barada <peterb@logicpd.com> + * + * Copyright (C) 2007 MontaVista Software, Inc. + * Anton Vorontsov <avorontsov@ru.mvista.com> + * + * (C) Copyright 2008 + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * (C) Copyright 2010 + * Lukas Roggli, KEYMILE Ltd, lukas.roggli@keymile.com + * + * (C) Copyright 2010-2011 + * Thomas Reufer, KEYMILE Ltd, thomas.reufer@keymile.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +#ifndef __CONFIG_KM8321_COMMON_H +#define __CONFIG_KM8321_COMMON_H + +/* + * High Level Configuration Options + */ +#define CONFIG_QE /* Has QE */ +#define CONFIG_MPC832x /* MPC832x CPU specific */ +#define CONFIG_KM8321 /* Keymile PBEC8321 board specific */ + +#define CONFIG_KM_DEF_ROOTPATH \ + "rootpath=/opt/eldk/ppc_8xx\0" + +/* include common defines/options for all 83xx Keymile boards */ +#include "km83xx-common.h" + +#define CONFIG_MISC_INIT_R + +/* + * System IO Config + */ +#define CONFIG_SYS_SICRL SICRL_IRQ_CKS + +/* + * Hardware Reset Configuration Word + */ +#define CONFIG_SYS_HRCW_LOW (\ + HRCWL_LCL_BUS_TO_SCB_CLK_1X1 | \ + HRCWL_DDR_TO_SCB_CLK_2X1 | \ + HRCWL_CSB_TO_CLKIN_2X1 | \ + HRCWL_CORE_TO_CSB_2_5X1 | \ + HRCWL_CE_PLL_VCO_DIV_2 | \ + HRCWL_CE_TO_PLL_1X3) + +#define CONFIG_SYS_HRCW_HIGH (\ + HRCWH_PCI_AGENT | \ + HRCWH_PCI_ARBITER_DISABLE | \ + HRCWH_CORE_ENABLE | \ + HRCWH_FROM_0X00000100 | \ + HRCWH_BOOTSEQ_DISABLE | \ + HRCWH_SW_WATCHDOG_DISABLE | \ + HRCWH_ROM_LOC_LOCAL_16BIT | \ + HRCWH_BIG_ENDIAN | \ + HRCWH_LALE_NORMAL) + +#define CONFIG_SYS_DDR_CS0_BNDS 0x0000007f +#define CONFIG_SYS_DDR_SDRAM_CFG (SDRAM_CFG_SDRAM_TYPE_DDR2 | \ + SDRAM_CFG_32_BE | \ + SDRAM_CFG_SREN) + +#define CONFIG_SYS_DDR_SDRAM_CFG2 0x00401000 +#define CONFIG_SYS_DDR_CLK_CNTL (DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05) +#define CONFIG_SYS_DDR_INTERVAL ((0x064 << SDRAM_INTERVAL_BSTOPRE_SHIFT) | \ + (0x200 << SDRAM_INTERVAL_REFINT_SHIFT)) + +#define CONFIG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN | CSCONFIG_AP | \ + CSCONFIG_ODT_WR_CFG | \ + CSCONFIG_ROW_BIT_13 | \ + CSCONFIG_COL_BIT_10) + +#define CONFIG_SYS_DDR_MODE 0x47860252 +#define CONFIG_SYS_DDR_MODE2 0x8080c000 + +#define CONFIG_SYS_DDR_TIMING_0 ((2 << TIMING_CFG0_MRS_CYC_SHIFT) | \ + (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) | \ + (2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) | \ + (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) | \ + (0 << TIMING_CFG0_WWT_SHIFT) | \ + (0 << TIMING_CFG0_RRT_SHIFT) | \ + (0 << TIMING_CFG0_WRT_SHIFT) | \ + (0 << TIMING_CFG0_RWT_SHIFT)) + +#define CONFIG_SYS_DDR_TIMING_1 ((TIMING_CFG1_CASLAT_50) | \ + (2 << TIMING_CFG1_WRTORD_SHIFT) | \ + (2 << TIMING_CFG1_ACTTOACT_SHIFT) | \ + (2 << TIMING_CFG1_WRREC_SHIFT) | \ + (6 << TIMING_CFG1_REFREC_SHIFT) | \ + (2 << TIMING_CFG1_ACTTORW_SHIFT) | \ + (6 << TIMING_CFG1_ACTTOPRE_SHIFT) | \ + (2 << TIMING_CFG1_PRETOACT_SHIFT)) + +#define CONFIG_SYS_DDR_TIMING_2 ((8 << TIMING_CFG2_FOUR_ACT_SHIFT) | \ + (3 << TIMING_CFG2_CKE_PLS_SHIFT) | \ + (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) | \ + (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) | \ + (4 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) | \ + (0 << TIMING_CFG2_ADD_LAT_SHIFT) | \ + (5 << TIMING_CFG2_CPO_SHIFT)) + +#define CONFIG_SYS_DDR_TIMING_3 0x00000000 + +#define CONFIG_SYS_KMBEC_FPGA_BASE 0xE8000000 +#define CONFIG_SYS_KMBEC_FPGA_SIZE 128 + +/* EEprom support */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 + +/* + * Local Bus Configuration & Clock Setup + */ +#define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_EADC_1 | LCRR_CLKDIV_2) +#define CONFIG_SYS_LBC_LBCR 0x00000000 + +/* + * MMU Setup + */ +#define CONFIG_SYS_IBAT7L (0) +#define CONFIG_SYS_IBAT7U (0) +#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L +#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U + +#endif /* __CONFIG_KM8321_COMMON_H */ diff --git a/include/configs/km83xx-common.h b/include/configs/km83xx-common.h new file mode 100644 index 0000000..85b6ed2 --- /dev/null +++ b/include/configs/km83xx-common.h @@ -0,0 +1,325 @@ +/* + * (C) Copyright 2010 + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +#ifndef __CONFIG_KM83XX_H +#define __CONFIG_KM83XX_H + +/* include common defines/options for all Keymile boards */ +#include "keymile-common.h" +#include "km-powerpc.h" + +#define MTDIDS_DEFAULT "nor0=boot" +#define MTDPARTS_DEFAULT "mtdparts=" \ + "boot:" \ + "768k(u-boot)," \ + "128k(env)," \ + "128k(envred)," \ + "-(" CONFIG_KM_UBI_PARTITION_NAME ")" + +#define CONFIG_MISC_INIT_R +/* + * System Clock Setup + */ +#define CONFIG_83XX_CLKIN 66000000 +#define CONFIG_SYS_CLK_FREQ 66000000 +#define CONFIG_83XX_PCICLK 66000000 + +/* + * IMMR new address + */ +#define CONFIG_SYS_IMMR 0xE0000000 + +/* + * Bus Arbitration Configuration Register (ACR) + */ +#define CONFIG_SYS_ACR_PIPE_DEP 3 /* pipeline depth 4 transactions */ +#define CONFIG_SYS_ACR_RPTCNT 3 /* 4 consecutive transactions */ +#define CONFIG_SYS_ACR_APARK 0 /* park bus to master (below) */ +#define CONFIG_SYS_ACR_PARKM 3 /* parking master = QuiccEngine */ + +/* + * DDR Setup + */ +#define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is system memory */ +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE +#define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE +#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN | \ + DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05) + +#define CFG_83XX_DDR_USES_CS0 + +/* + * Manually set up DDR parameters + */ +#define CONFIG_DDR_II +#define CONFIG_SYS_DDR_SIZE 2048 /* MB */ + +/* + * The reserved memory + */ +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ +#define CONFIG_SYS_FLASH_BASE 0xF0000000 + +#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) +#define CONFIG_SYS_RAMBOOT +#endif + +/* Reserve 768 kB for Mon */ +#define CONFIG_SYS_MONITOR_LEN (768 * 1024) + +/* + * Initial RAM Base Address Setup + */ +#define CONFIG_SYS_INIT_RAM_LOCK +#define CONFIG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* End of used area in RAM */ +#define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* num bytes initial data */ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) + +/* + * Init Local Bus Memory Controller: + * + * Bank Bus Machine PortSz Size Device + * ---- --- ------- ------ ----- ------ + * 0 Local GPCM 16 bit 256MB FLASH + * 1 Local GPCM 8 bit 128MB GPIO/PIGGY + * + */ +/* + * FLASH on the Local Bus + */ +#define CONFIG_SYS_FLASH_CFI /* use the Common Flash Interface */ +#define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */ +#define CONFIG_SYS_FLASH_SIZE 256 /* max FLASH size is 256M */ +#define CONFIG_SYS_FLASH_PROTECTION +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE + +#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_LBLAWAR0_PRELIM 0x8000001b /* 256MB window size */ + +#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | \ + (2 << BR_PS_SHIFT) | /* 16 bit port size */ \ + BR_V) + +#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) | \ + OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | \ + OR_GPCM_SCY_5 | \ + OR_GPCM_TRLX | OR_GPCM_EAD) + +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max num of sects on one chip */ +#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } + +/* + * PRIO1/PIGGY on the local bus CS1 + */ +/* Window base at flash base */ +#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_KMBEC_FPGA_BASE +#define CONFIG_SYS_LBLAWAR1_PRELIM 0x8000001A /* 128MB window size */ + +#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_KMBEC_FPGA_BASE | \ + (1 << BR_PS_SHIFT) | /* 8 bit port size */ \ + BR_V) +#define CONFIG_SYS_OR1_PRELIM (MEG_TO_AM(CONFIG_SYS_KMBEC_FPGA_SIZE) | \ + OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | \ + OR_GPCM_SCY_2 | \ + OR_GPCM_TRLX | OR_GPCM_EAD) + +/* + * Serial Port + */ +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) + +#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500) +#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600) + +/* Pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT +#define CONFIG_OF_BOARD_SETUP +#define CONFIG_OF_STDOUT_VIA_ALIAS + +#ifndef CONFIG_NET_MULTI +#define CONFIG_NET_MULTI +#endif +/* + * QE UEC ethernet configuration + */ +#define CONFIG_UEC_ETH +#define CONFIG_ETHPRIME "UEC0" + +#define CONFIG_UEC_ETH1 /* GETH1 */ +#define UEC_VERBOSE_DEBUG 1 + +#ifdef CONFIG_UEC_ETH1 +#define CONFIG_SYS_UEC1_UCC_NUM 3 /* UCC4 */ +#define CONFIG_SYS_UEC1_RX_CLK QE_CLK_NONE /* not used in RMII Mode */ +#define CONFIG_SYS_UEC1_TX_CLK QE_CLK17 +#define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH +#define CONFIG_SYS_UEC1_PHY_ADDR 0 +#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII +#define CONFIG_SYS_UEC1_INTERFACE_SPEED 100 +#endif + +/* + * Environment + */ + +#ifndef CONFIG_SYS_RAMBOOT +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \ + CONFIG_SYS_MONITOR_LEN) +#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */ +#define CONFIG_ENV_OFFSET (CONFIG_SYS_MONITOR_LEN) + +/* Address and size of Redundant Environment Sector */ +#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \ + CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) + +#else /* CFG_SYS_RAMBOOT */ +#define CONFIG_SYS_NO_FLASH /* Flash is not usable now */ +#define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */ +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) +#define CONFIG_ENV_SIZE 0x2000 +#endif /* CFG_SYS_RAMBOOT */ + +/* I2C */ +#define CONFIG_HARD_I2C /* I2C with hardware support */ +#define CONFIG_FSL_I2C +#define CONFIG_SYS_I2C_SPEED 200000 /* I2C speed and slave address */ +#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C_OFFSET 0x3000 + +/* I2C SYSMON (LM75, AD7414 is almost compatible) */ +#define CONFIG_DTT_LM75 /* ON Semi's LM75 */ +#define CONFIG_DTT_SENSORS {0, 1, 2, 3} /* Sensor addresses */ +#define CONFIG_SYS_DTT_MAX_TEMP 70 +#define CONFIG_SYS_DTT_LOW_TEMP -30 +#define CONFIG_SYS_DTT_HYSTERESIS 3 +#define CONFIG_SYS_DTT_BUS_NUM (CONFIG_SYS_MAX_I2C_BUS) + +#if defined(CONFIG_CMD_NAND) +#define CONFIG_NAND_KMETER1 +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE CONFIG_SYS_KMBEC_FPGA_BASE +#endif + +#if defined(CONFIG_PCI) +#define CONFIG_CMD_PCI +#endif + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CONFIG_SYS_BOOTMAPSZ (8 << 20) + +/* + * Core HID Setup + */ +#define CONFIG_SYS_HID0_INIT 0x000000000 +#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \ + HID0_ENABLE_INSTRUCTION_CACHE) +#define CONFIG_SYS_HID2 HID2_HBE + +/* + * MMU Setup + */ + +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + +/* DDR: cache cacheable */ +#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | \ + BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | \ + BATU_VS | BATU_VP) +#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L +#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U + +/* IMMRBAR & PCI IO: cache-inhibit and guarded */ +#define CONFIG_SYS_IBAT1L (CONFIG_SYS_IMMR | BATL_PP_10 | \ + BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_IBAT1U (CONFIG_SYS_IMMR | BATU_BL_4M | BATU_VS \ + | BATU_VP) +#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L +#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U + +/* PRIO1, PIGGY: icache cacheable, but dcache-inhibit and guarded */ +#define CONFIG_SYS_IBAT2L (CONFIG_SYS_KMBEC_FPGA_BASE | BATL_PP_10 | \ + BATL_MEMCOHERENCE) +#define CONFIG_SYS_IBAT2U (CONFIG_SYS_KMBEC_FPGA_BASE | BATU_BL_128M | \ + BATU_VS | BATU_VP) +#define CONFIG_SYS_DBAT2L (CONFIG_SYS_KMBEC_FPGA_BASE | BATL_PP_10 | \ + BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U + +/* FLASH: icache cacheable, but dcache-inhibit and guarded */ +#define CONFIG_SYS_IBAT3L (CONFIG_SYS_FLASH_BASE | BATL_PP_10 | \ + BATL_MEMCOHERENCE) +#define CONFIG_SYS_IBAT3U (CONFIG_SYS_FLASH_BASE | BATU_BL_256M | \ + BATU_VS | BATU_VP) +#define CONFIG_SYS_DBAT3L (CONFIG_SYS_FLASH_BASE | BATL_PP_10 | \ + BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U + +/* Stack in dcache: cacheable, no memory coherence */ +#define CONFIG_SYS_IBAT4L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10) +#define CONFIG_SYS_IBAT4U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | \ + BATU_VS | BATU_VP) +#define CONFIG_SYS_DBAT4L CONFIG_SYS_IBAT4L +#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#define BOOTFLASH_START 0xF0000000 + +#define CONFIG_KM_CONSOLE_TTY "ttyS0" + +/* + * Environment Configuration + */ +#define CONFIG_ENV_OVERWRITE +#ifndef CONFIG_KM_DEF_ENV /* if not set by keymile-common.h */ +#define CONFIG_KM_DEF_ENV "km-common=empty\0" +#endif + +#ifndef CONFIG_KM_DEF_ROOTPATH +#define CONFIG_KM_DEF_ROOTPATH \ + "rootpath=/opt/eldk/ppc_82xx\0" +#endif + +#define CONFIG_EXTRA_ENV_SETTINGS \ + CONFIG_KM_DEF_ENV \ + CONFIG_KM_DEF_ROOTPATH \ + "dtt_bus=pca9547:70:a\0" \ + "EEprom_ivm=pca9547:70:9\0" \ + "newenv=" \ + "prot off 0xF00C0000 +0x40000 && " \ + "era 0xF00C0000 +0x40000\0" \ + "unlock=yes\0" \ + "" + +#if defined(CONFIG_UEC_ETH) +#define CONFIG_HAS_ETH0 +#endif + +#endif /* __CONFIG_KM83XX_H */ diff --git a/include/configs/km_arm.h b/include/configs/km_arm.h index bf77cc0..70113d4 100644 --- a/include/configs/km_arm.h +++ b/include/configs/km_arm.h @@ -6,6 +6,9 @@ * (C) Copyright 2009 * Stefan Roese, DENX Software Engineering, sr@denx.de. * + * (C) Copyright 2010-2011 + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + * * See file CREDITS for list of people who contributed to this * project. * @@ -25,7 +28,10 @@ * MA 02110-1301 USA */ -/* for linking errors see http://lists.denx.de/pipermail/u-boot/2009-July/057350.html */ +/* + * for linking errors see + * http://lists.denx.de/pipermail/u-boot/2009-July/057350.html + */ #ifndef _CONFIG_KM_ARM_H #define _CONFIG_KM_ARM_H @@ -38,12 +44,34 @@ #define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ #define CONFIG_KIRKWOOD /* SOC Family Name */ #define CONFIG_KW88F6281 /* SOC Name */ -#define CONFIG_MACH_SUEN3 /* Machine type */ +#define CONFIG_MACH_KM_KIRKWOOD /* Machine type */ /* include common defines/options for all Keymile boards */ #include "keymile-common.h" -#undef CONFIG_CMD_DTT -#undef CONFIG_BOOTCOUNT_LIMIT + +#define CONFIG_SYS_TEXT_BASE 0x04000000 /* code address after reloc */ +#define CONFIG_ENV_SIZE (128 << 10) /* NAND chip block size */ +#define CONFIG_SYS_MEMTEST_START 0x00400000 /* 4M */ +#define CONFIG_SYS_MEMTEST_END 0x007fffff /*(_8M -1) */ +#define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */ + +/* pseudo-non volatile RAM [hex] */ +#define CONFIG_KM_PNVRAM 0x80000 +/* physical RAM MTD size [hex] */ +#define CONFIG_KM_PHRAM 0x17F000 + +#define CONFIG_KM_CRAMFS_ADDR 0x2400000 +#define CONFIG_KM_KERNEL_ADDR 0x2000000 /* 4096KBytes */ + +#define CONFIG_KM_DEF_ENV_CPU \ + "addmtdparts=setenv bootargs ${bootargs} ${mtdparts}\0" \ + "boot=bootm ${actual_kernel_addr} - -\0" \ + "cramfsloadfdt=echo \\\\c\0" \ + "tftpfdt=echo \\\\c\0" \ + CONFIG_KM_DEF_ENV_UPDATE \ + "" + + #define CONFIG_MD5 /* get_random_hex on krikwood needs MD5 support */ #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ @@ -152,15 +180,15 @@ void set_sda (int state); void set_scl (int state); int get_sda (void); int get_scl (void); -#define SUEN3_SDA_PIN 8 -#define SUEN3_SCL_PIN 9 -#define SUEN3_ENV_WP 38 - -#define I2C_ACTIVE __set_direction(SUEN3_SDA_PIN, 0) -#define I2C_TRISTATE __set_direction(SUEN3_SDA_PIN, 1) -#define I2C_READ (kw_gpio_get_value(SUEN3_SDA_PIN) ? 1 : 0) -#define I2C_SDA(bit) kw_gpio_set_value(SUEN3_SDA_PIN, bit); -#define I2C_SCL(bit) kw_gpio_set_value(SUEN3_SCL_PIN, bit); +#define KM_KIRKWOOD_SDA_PIN 8 +#define KM_KIRKWOOD_SCL_PIN 9 +#define KM_KIRKWOOD_ENV_WP 38 + +#define I2C_ACTIVE __set_direction(KM_KIRKWOOD_SDA_PIN, 0) +#define I2C_TRISTATE __set_direction(KM_KIRKWOOD_SDA_PIN, 1) +#define I2C_READ (kw_gpio_get_value(KM_KIRKWOOD_SDA_PIN) ? 1 : 0) +#define I2C_SDA(bit) kw_gpio_set_value(KM_KIRKWOOD_SDA_PIN, bit) +#define I2C_SCL(bit) kw_gpio_set_value(KM_KIRKWOOD_SCL_PIN, bit) #endif #define I2C_DELAY udelay(3) /* 1/4 I2C clock duration */ @@ -173,6 +201,47 @@ int get_scl (void); #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 +/* + * Environment variables configurations + */ +#define CONFIG_ENV_IS_IN_EEPROM /* use EEPROM for environment vars */ +#define CONFIG_SYS_DEF_EEPROM_ADDR 0x50 +#define CONFIG_ENV_EEPROM_IS_ON_I2C +#define CONFIG_SYS_EEPROM_WREN +#define CONFIG_ENV_OFFSET 0x0 /* no bracets! */ +#undef CONFIG_ENV_SIZE +#define CONFIG_ENV_SIZE (0x2000 - CONFIG_ENV_OFFSET) +#define CONFIG_I2C_ENV_EEPROM_BUS "pca9547:70:d\0" + +/* offset redund: (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) */ +#define CONFIG_SYS_REDUNDAND_ENVIRONMENT +#define CONFIG_ENV_OFFSET_REDUND 0x2000 /* no bracets! */ +#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) + +#define CONFIG_CMD_SF + +#define CONFIG_SPI_FLASH +#define CONFIG_HARD_SPI +#define CONFIG_KIRKWOOD_SPI +#define CONFIG_SPI_FLASH_STMICRO +#define CONFIG_ENV_SPI_BUS 0 +#define CONFIG_ENV_SPI_CS 0 +#define CONFIG_ENV_SPI_MAX_HZ 50000000 /* 50Mhz */ + +#define FLASH_GPIO_PIN 0x00010000 + +#define MTDIDS_DEFAULT "nand0=orion_nand" +/* test-only: partitioning needs some tuning, this is just for tests */ +#define MTDPARTS_DEFAULT "mtdparts=" \ + "orion_nand:" \ + "-(" CONFIG_KM_UBI_PARTITION_NAME ")" + +#define CONFIG_KM_DEF_ENV_UPDATE \ + "update=" \ + "spi on;sf probe 0;sf erase 0 50000;" \ + "sf write ${u-boot_addr_r} 0 ${filesize};" \ + "spi off\0" + #if defined(CONFIG_SYS_NO_FLASH) #define CONFIG_KM_UBI_PARTITION_NAME "ubi0" #undef CONFIG_FLASH_CFI_MTD @@ -185,4 +254,13 @@ int get_scl (void); #define CONFIG_SYS_INIT_SP_ADDR 0xC8012000 /* Do early setups now in board_init_f() */ #define CONFIG_BOARD_EARLY_INIT_F + +/* + * resereved pram area at the end of memroy [hex] + * 8Mbytes for switch + 4Kbytes for bootcount + */ +#define CONFIG_KM_RESERVED_PRAM 0x801000 +/* address for the bootcount (taken from end of RAM) */ +#define BOOTCOUNT_ADDR (CONFIG_KM_RESERVED_PRAM) + #endif /* _CONFIG_KM_ARM_H */ diff --git a/include/configs/kmeter1.h b/include/configs/kmeter1.h index 8fcadfe..2fcecaf 100644 --- a/include/configs/kmeter1.h +++ b/include/configs/kmeter1.h @@ -8,7 +8,7 @@ * Copyright (C) 2007 MontaVista Software, Inc. * Anton Vorontsov <avorontsov@ru.mvista.com> * - * (C) Copyright 2008 + * (C) Copyright 2008-2011 * Heiko Schocher, DENX Software Engineering, hs@denx.de. * * This program is free software; you can redistribute it and/or @@ -23,32 +23,24 @@ /* * High Level Configuration Options */ -#define CONFIG_E300 1 /* E300 family */ -#define CONFIG_QE 1 /* Has QE */ -#define CONFIG_MPC83xx 1 /* MPC83xx family */ -#define CONFIG_MPC8360 1 /* MPC8360 CPU specific */ -#define CONFIG_KMETER1 1 /* KMETER1 board specific */ +#define CONFIG_QE /* Has QE */ +#define CONFIG_MPC8360 /* MPC8360 CPU specific */ +#define CONFIG_KMETER1 /* KMETER1 board specific */ #define CONFIG_HOSTNAME kmeter1 +#define CONFIG_KM_BOARD_NAME "kmeter1" #define CONFIG_SYS_TEXT_BASE 0xF0000000 +#define CONFIG_KM_DEF_NETDEV \ + "netdev=eth2\0" \ -/* include common defines/options for all Keymile boards */ -#include "keymile-common.h" +/* include common defines/options for all 83xx Keymile boards */ +#include "km83xx-common.h" -#define CONFIG_KM_UBI_PARTITION_NAME "ubi0" - -#define MTDIDS_DEFAULT "nor0=boot" -#define MTDPARTS_DEFAULT \ - "mtdparts=boot:768k(u-boot),128k(env),128k(envred)," \ - "-(" CONFIG_KM_UBI_PARTITION_NAME ")" - -#define CONFIG_MISC_INIT_R 1 +#define CONFIG_MISC_INIT_R /* - * System Clock Setup + * System IO Setup */ -#define CONFIG_83XX_CLKIN 66000000 -#define CONFIG_SYS_CLK_FREQ 66000000 -#define CONFIG_83XX_PCICLK 66000000 +#define CONFIG_SYS_SICRH (SICRH_UC1EOBI | SICRH_UC2E1OBI) /* * Hardware Reset Configuration Word @@ -69,54 +61,7 @@ HRCWH_LALE_EARLY | \ HRCWH_LDP_CLEAR ) -/* - * System IO Config - */ -#define CONFIG_SYS_SICRH 0x00000006 -#define CONFIG_SYS_SICRL 0x00000000 - -/* - * IMMR new address - */ -#define CONFIG_SYS_IMMR 0xE0000000 - -/* - * Bus Arbitration Configuration Register (ACR) - */ -#define CONFIG_SYS_ACR_PIPE_DEP 3 /* pipeline depth 4 transactions */ -#define CONFIG_SYS_ACR_RPTCNT 3 /* 4 consecutive transactions */ -#define CONFIG_SYS_ACR_APARK 0 /* park bus to master (below) */ -#define CONFIG_SYS_ACR_PARKM 3 /* parking master = QuiccEngine */ - -/* - * DDR Setup - */ -#define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is system memory */ -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE -#define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE -#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN | \ - DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05) - -#define CFG_83XX_DDR_USES_CS0 - -#undef CONFIG_DDR_ECC - -/* - * DDRCDR - DDR Control Driver Register - */ - -#undef CONFIG_SPD_EEPROM /* Do not use SPD EEPROM for DDR setup */ - -/* - * Manually set up DDR parameters - */ -#define CONFIG_DDR_II -#define CONFIG_SYS_DDR_SIZE 2048 /* MB */ #define CONFIG_SYS_DDR_CS0_BNDS 0x0000007f -#define CONFIG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN | CSCONFIG_AP | \ - CSCONFIG_ROW_BIT_13 | \ - CSCONFIG_COL_BIT_10 | CSCONFIG_ODT_WR_ACS) - #define CONFIG_SYS_DDR_SDRAM_CFG (SDRAM_CFG_SDRAM_TYPE_DDR2 | \ SDRAM_CFG_SREN) #define CONFIG_SYS_DDR_SDRAM_CFG2 0x00401000 @@ -124,6 +69,11 @@ #define CONFIG_SYS_DDR_INTERVAL ((0x080 << SDRAM_INTERVAL_BSTOPRE_SHIFT) | \ (0x3cf << SDRAM_INTERVAL_REFINT_SHIFT)) +#define CONFIG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN | CSCONFIG_AP | \ + CSCONFIG_ROW_BIT_13 | \ + CSCONFIG_COL_BIT_10 | \ + CSCONFIG_ODT_WR_ACS) + #define CONFIG_SYS_DDRCDR 0x40000001 #define CONFIG_SYS_DDR_MODE 0x47860452 #define CONFIG_SYS_DDR_MODE2 0x8080c000 @@ -137,14 +87,14 @@ (0 << TIMING_CFG0_WRT_SHIFT) | \ (0 << TIMING_CFG0_RWT_SHIFT)) -#define CONFIG_SYS_DDR_TIMING_1 (( TIMING_CFG1_CASLAT_50) | \ - ( 2 << TIMING_CFG1_WRTORD_SHIFT) | \ - ( 2 << TIMING_CFG1_ACTTOACT_SHIFT) | \ - ( 3 << TIMING_CFG1_WRREC_SHIFT) | \ - ( 7 << TIMING_CFG1_REFREC_SHIFT) | \ - ( 3 << TIMING_CFG1_ACTTORW_SHIFT) | \ - ( 8 << TIMING_CFG1_ACTTOPRE_SHIFT) | \ - ( 3 << TIMING_CFG1_PRETOACT_SHIFT)) +#define CONFIG_SYS_DDR_TIMING_1 ((TIMING_CFG1_CASLAT_50) | \ + (2 << TIMING_CFG1_WRTORD_SHIFT) | \ + (2 << TIMING_CFG1_ACTTOACT_SHIFT) | \ + (3 << TIMING_CFG1_WRREC_SHIFT) | \ + (7 << TIMING_CFG1_REFREC_SHIFT) | \ + (3 << TIMING_CFG1_ACTTORW_SHIFT) | \ + (8 << TIMING_CFG1_ACTTOPRE_SHIFT) | \ + (3 << TIMING_CFG1_PRETOACT_SHIFT)) #define CONFIG_SYS_DDR_TIMING_2 ((8 << TIMING_CFG2_FOUR_ACT_SHIFT) | \ (3 << TIMING_CFG2_CKE_PLS_SHIFT) | \ @@ -156,31 +106,15 @@ #define CONFIG_SYS_DDR_TIMING_3 0x00000000 -/* - * The reserved memory - */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ -#define CONFIG_SYS_FLASH_BASE 0xF0000000 -#define CONFIG_SYS_PIGGY_BASE 0xE8000000 -#define CONFIG_SYS_PIGGY_SIZE 128 -#define CONFIG_SYS_PAXE_BASE 0xA0000000 +/* PRIO FPGA */ +#define CONFIG_SYS_KMBEC_FPGA_BASE 0xE8000000 +#define CONFIG_SYS_KMBEC_FPGA_SIZE 128 +/* PAXE FPGA */ +#define CONFIG_SYS_PAXE_BASE 0xA0000000 #define CONFIG_SYS_PAXE_SIZE 512 -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -#define CONFIG_SYS_RAMBOOT -#else -#undef CONFIG_SYS_RAMBOOT -#endif - -#define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */ - -/* - * Initial RAM Base Address Setup - */ -#define CONFIG_SYS_INIT_RAM_LOCK 1 -#define CONFIG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +/* EEprom support */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* * Local Bus Configuration & Clock Setup @@ -194,56 +128,14 @@ * * Bank Bus Machine PortSz Size Device * ---- --- ------- ------ ----- ------ - * 0 Local GPCM 16 bit 256MB FLASH - * 1 Local GPCM 8 bit 128MB GPIO/PIGGY * 3 Local GPCM 8 bit 512MB PAXE * */ -/* - * FLASH on the Local Bus - */ -#define CONFIG_SYS_FLASH_CFI /* use the Common Flash Interface */ -#define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */ -#define CONFIG_SYS_FLASH_SIZE 256 /* max FLASH size is 256M */ -#define CONFIG_SYS_FLASH_PROTECTION 1 -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 - -#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE /* Window base at flash base */ -#define CONFIG_SYS_LBLAWAR0_PRELIM 0x8000001b /* 256MB window size */ - -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | \ - (2 << BR_PS_SHIFT) | /* 16 bit port size */ \ - BR_V) - -#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) | \ - OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | \ - OR_GPCM_SCY_5 | \ - OR_GPCM_TRLX | OR_GPCM_EAD) - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max num of sects on one chip */ -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } - -#undef CONFIG_SYS_FLASH_CHECKSUM - -/* - * PRIO1/PIGGY on the local bus CS1 - */ -#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_PIGGY_BASE /* Window base at flash base */ -#define CONFIG_SYS_LBLAWAR1_PRELIM 0x8000001A /* 128MB window size */ - -#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_PIGGY_BASE | \ - (1 << BR_PS_SHIFT) | /* 8 bit port size */ \ - BR_V) -#define CONFIG_SYS_OR1_PRELIM (MEG_TO_AM(CONFIG_SYS_PIGGY_SIZE) | /* 128MB */ \ - OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | \ - OR_GPCM_SCY_2 | \ - OR_GPCM_TRLX | OR_GPCM_EAD) /* * PAXE on the local bus CS3 */ -#define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_PAXE_BASE /* Window base at flash base */ +#define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_PAXE_BASE #define CONFIG_SYS_LBLAWAR3_PRELIM 0x8000001C /* 512MB window size */ #define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_PAXE_BASE | \ @@ -255,165 +147,14 @@ OR_GPCM_TRLX | OR_GPCM_EAD) /* - * Serial Port - */ -#define CONFIG_CONS_INDEX 1 -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) - -#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500) -#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600) - -/* Pass open firmware flat tree */ -#define CONFIG_OF_LIBFDT 1 -#define CONFIG_OF_BOARD_SETUP 1 -#define CONFIG_OF_STDOUT_VIA_ALIAS - -/* - * General PCI - * Addresses are mapped 1-1. - */ -#undef CONFIG_PCI /* No PCI */ - -#ifndef CONFIG_NET_MULTI -#define CONFIG_NET_MULTI 1 -#endif -/* - * QE UEC ethernet configuration - */ -#define CONFIG_UEC_ETH -#define CONFIG_ETHPRIME "UEC0" - -#define CONFIG_UEC_ETH1 /* GETH1 */ -#define UEC_VERBOSE_DEBUG 1 - -#ifdef CONFIG_UEC_ETH1 -#define CONFIG_SYS_UEC1_UCC_NUM 3 /* UCC4 */ -#define CONFIG_SYS_UEC1_RX_CLK QE_CLK_NONE /* not used in RMII Mode */ -#define CONFIG_SYS_UEC1_TX_CLK QE_CLK17 -#define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH -#define CONFIG_SYS_UEC1_PHY_ADDR 0 -#define CONFIG_SYS_UEC1_INTERFACE_TYPE RMII -#define CONFIG_SYS_UEC1_INTERFACE_SPEED 100 -#endif - -/* - * Environment - */ - -#ifndef CONFIG_SYS_RAMBOOT -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) -#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */ -#define CONFIG_ENV_OFFSET (CONFIG_SYS_MONITOR_LEN) - -/* Address and size of Redundant Environment Sector */ -#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET+CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) - -#else /* CFG_RAMBOOT */ -#define CONFIG_SYS_NO_FLASH 1 /* Flash is not usable now */ -#define CONFIG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) -#define CONFIG_ENV_SIZE 0x2000 -#endif /* CFG_RAMBOOT */ - -/* I2C */ -#define CONFIG_HARD_I2C /* I2C with hardware support */ -#undef CONFIG_SOFT_I2C /* I2C bit-banged */ -#define CONFIG_FSL_I2C -#define CONFIG_SYS_I2C_SPEED 200000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F -#define CONFIG_SYS_I2C_OFFSET 0x3000 -#define CONFIG_I2C_MULTI_BUS 1 -#define CONFIG_I2C_MUX 1 - -/* EEprom support */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 - -/* I2C SYSMON (LM75, AD7414 is almost compatible) */ -#define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */ -#define CONFIG_DTT_SENSORS {0, 1, 2, 3} /* Sensor addresses */ -#define CONFIG_SYS_DTT_MAX_TEMP 70 -#define CONFIG_SYS_DTT_LOW_TEMP -30 -#define CONFIG_SYS_DTT_HYSTERESIS 3 -#define CONFIG_SYS_DTT_BUS_NUM (CONFIG_SYS_MAX_I2C_BUS) - -#if defined(CONFIG_CMD_NAND) -#define CONFIG_NAND_KMETER1 -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE CONFIG_SYS_PIGGY_BASE -#endif - -#if defined(CONFIG_PCI) -#define CONFIG_CMD_PCI -#endif - -#if defined(CFG_RAMBOOT) -#undef CONFIG_CMD_SAVEENV -#undef CONFIG_CMD_LOADS -#endif - -/* - * For booting Linux, the board info and command line data - * have to be in the first 256 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* Initial Memory map for Linux */ - -/* - * Core HID Setup - */ -#define CONFIG_SYS_HID0_INIT 0x000000000 -#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \ - HID0_ENABLE_INSTRUCTION_CACHE) -#define CONFIG_SYS_HID2 HID2_HBE - -/* * MMU Setup */ -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ - -/* DDR: cache cacheable */ -#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | \ - BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) -#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L -#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U - -/* IMMRBAR & PCI IO: cache-inhibit and guarded */ -#define CONFIG_SYS_IBAT1L (CONFIG_SYS_IMMR | BATL_PP_10 | \ - BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT1U (CONFIG_SYS_IMMR | BATU_BL_4M | BATU_VS | BATU_VP) -#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L -#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U - -/* PRIO1, PIGGY: icache cacheable, but dcache-inhibit and guarded */ -#define CONFIG_SYS_IBAT2L (CONFIG_SYS_PIGGY_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT2U (CONFIG_SYS_PIGGY_BASE | BATU_BL_128M | BATU_VS | BATU_VP) -#define CONFIG_SYS_DBAT2L (CONFIG_SYS_PIGGY_BASE | BATL_PP_10 | \ - BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U - -/* FLASH: icache cacheable, but dcache-inhibit and guarded */ -#define CONFIG_SYS_IBAT3L (CONFIG_SYS_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT3U (CONFIG_SYS_FLASH_BASE | BATU_BL_256M | BATU_VS | BATU_VP) -#define CONFIG_SYS_DBAT3L (CONFIG_SYS_FLASH_BASE | BATL_PP_10 | \ - BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U - -/* Stack in dcache: cacheable, no memory coherence */ -#define CONFIG_SYS_IBAT4L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10) -#define CONFIG_SYS_IBAT4U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP) -#define CONFIG_SYS_DBAT4L CONFIG_SYS_IBAT4L -#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U - /* PAXE: icache cacheable, but dcache-inhibit and guarded */ -#define CONFIG_SYS_IBAT5L (CONFIG_SYS_PAXE_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT5U (CONFIG_SYS_PAXE_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CONFIG_SYS_IBAT5L (CONFIG_SYS_PAXE_BASE | BATL_PP_10 | \ + BATL_MEMCOHERENCE) +#define CONFIG_SYS_IBAT5U (CONFIG_SYS_PAXE_BASE | BATU_BL_256M | \ + BATU_VS | BATU_VP) #define CONFIG_SYS_DBAT5L (CONFIG_SYS_PAXE_BASE | BATL_PP_10 | \ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) #define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U @@ -441,39 +182,4 @@ #define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U #endif /* CONFIG_PCI */ -#define BOOTFLASH_START F0000000 - -#define CONFIG_PRAM 512 /* protected RAM [KBytes] */ - -/* - * Environment Configuration - */ -#define CONFIG_ENV_OVERWRITE -#ifndef CONFIG_KM_DEF_ENV /* if not set by keymile-common.h */ -#define CONFIG_KM_DEF_ENV "km-common=empty\0" -#endif - -#define CONFIG_EXTRA_ENV_SETTINGS \ - CONFIG_KM_DEF_ENV \ - "rootpath=/opt/eldk/ppc_82xx\0" \ - "addcon=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\ - "ramdisk_file=/tftpboot/kmeter1/uRamdisk\0" \ - "loadram=tftp ${ramdisk_addr_r} ${ramdisk_file}\0" \ - "loadfdt=tftp ${fdt_addr_r} ${fdt_file}\0" \ - "loadkernel=tftp ${kernel_addr_r} ${bootfile}\0" \ - "unlock=yes\0" \ - "fdt_addr=F0080000\0" \ - "kernel_addr=F00a0000\0" \ - "ramdisk_addr=F03a0000\0" \ - "ramdisk_addr_r=F10000\0" \ - "EEprom_ivm=pca9547:70:9\0" \ - "dtt_bus=pca9547:70:a\0" \ - "mtdids=nor0=app \0" \ - "mtdparts=" MK_STR(MTDPARTS_DEFAULT) "\0" \ - "" - -#if defined(CONFIG_UEC_ETH) -#define CONFIG_HAS_ETH0 -#endif - #endif /* __CONFIG_H */ diff --git a/include/configs/kmsupx5.h b/include/configs/kmsupx5.h new file mode 100644 index 0000000..55ed3f6 --- /dev/null +++ b/include/configs/kmsupx5.h @@ -0,0 +1,91 @@ +/* + * Copyright (C) 2006 Freescale Semiconductor, Inc. + * Dave Liu <daveliu@freescale.com> + * + * Copyright (C) 2007 Logic Product Development, Inc. + * Peter Barada <peterb@logicpd.com> + * + * Copyright (C) 2007 MontaVista Software, Inc. + * Anton Vorontsov <avorontsov@ru.mvista.com> + * + * (C) Copyright 2008 + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * (C) Copyright 2010 + * Lukas Roggli, KEYMILE Ltd, lukas.roggli@keymile.com + * + * (C) Copyright 2010-2011 + * Thomas Reufer, KEYMILE Ltd, thomas.reufer@keymile.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ +#define CONFIG_KMSUPX5 1 /* Keymile PBEC8321 board specific */ +#define CONFIG_HOSTNAME supx5 +#define CONFIG_KM_BOARD_NAME "supx5" + +#define CONFIG_SYS_TEXT_BASE 0xF0000000 + +/* include common defines/options for all 8321 Keymile boards */ +#include "km8321-common.h" + +/* + * Init Local Bus Memory Controller: + * + * Bank Bus Machine PortSz Size Device + * ---- --- ------- ------ ----- ------ + * 2 Local GPCM 8 bit 256MB LPXF + * 3 Local not used + * + */ + +/* + * LPXF on the local bus CS2 + * Window base at flash base + * Window size: 256 MB + */ + +#define CONFIG_SYS_LPXF_BASE 0xA0000000 /* LPXF */ +#define CONFIG_SYS_LPXF_SIZE 256 /* Megabytes */ + +#define CONFIG_SYS_LBLAWBAR2_PRELIM CONFIG_SYS_LPXF_BASE +#define CONFIG_SYS_LBLAWAR2_PRELIM (LBLAWAR_EN | LBLAWAR_256MB) + +#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_LPXF_BASE | \ + BR_PS_8 | \ + BR_MS_GPCM | \ + BR_V) + +#define CONFIG_SYS_OR2_PRELIM (MEG_TO_AM(CONFIG_SYS_LPXF_SIZE) | \ + OR_GPCM_CSNT | \ + OR_GPCM_ACS_DIV4 | \ + OR_GPCM_SCY_2 | \ + (OR_GPCM_TRLX & \ + (~OR_GPCM_EHTR)) | /* EHTR = 0 */ \ + OR_GPCM_EAD) + +/* LPXF: icache cacheable, but dcache-inhibit and guarded */ +#define CONFIG_SYS_IBAT5L (CONFIG_SYS_LPXF_BASE | BATL_PP_10 | \ + BATL_MEMCOHERENCE) +#define CONFIG_SYS_IBAT5U (CONFIG_SYS_LPXF_BASE | BATU_BL_256M | \ + BATU_VS | BATU_VP) +#define CONFIG_SYS_DBAT5L (CONFIG_SYS_LPXF_BASE | BATL_PP_10 | \ + BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U + +/* Bank 3 not used */ +#define CONFIG_SYS_IBAT6L (0) +#define CONFIG_SYS_IBAT6U (0) +#define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L +#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U + +#endif /* __CONFIG_H */ diff --git a/include/configs/mgcoge.h b/include/configs/mgcoge.h index 6dec0ee..dcde76c 100644 --- a/include/configs/mgcoge.h +++ b/include/configs/mgcoge.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2007 + * (C) Copyright 2007-2011 * Heiko Schocher, DENX Software Engineering, hs@denx.de. * * See file CREDITS for list of people who contributed to this @@ -29,92 +29,24 @@ * (easy to change) */ -#define CONFIG_MPC8247 1 -#define CONFIG_MPC8272_FAMILY 1 -#define CONFIG_MGCOGE 1 +#define CONFIG_MPC8247 +#define CONFIG_MGCOGE #define CONFIG_HOSTNAME mgcoge #define CONFIG_SYS_TEXT_BASE 0xFE000000 -#define CONFIG_CPM2 1 /* Has a CPM2 */ - /* include common defines/options for all Keymile boards */ #include "keymile-common.h" - -/* - * Select serial console configuration - * - * If either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then - * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4 - * for SCC). - */ -#define CONFIG_CONS_ON_SMC /* Console is on SMC */ -#undef CONFIG_CONS_ON_SCC /* It's not on SCC */ -#undef CONFIG_CONS_NONE /* It's not on external UART */ -#define CONFIG_CONS_INDEX 2 /* SMC2 is used for console */ -#define CONFIG_SYS_SMC_RXBUFLEN 128 -#define CONFIG_SYS_MAXIDLE 10 - -/* - * Select ethernet configuration - * - * If either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, - * then CONFIG_ETHER_INDEX must be set to the channel number (1-4 for - * SCC, 1-3 for FCC) - * - * If CONFIG_ETHER_NONE is defined, then either the ethernet routines - * must be defined elsewhere (as for the console), or CONFIG_CMD_NET - * must be unset. - */ -#define CONFIG_ETHER_ON_SCC /* Ethernet is on SCC */ -#undef CONFIG_ETHER_ON_FCC /* Ethernet is not on FCC */ -#undef CONFIG_ETHER_NONE /* No external Ethernet */ -#define CONFIG_NET_MULTI 1 - -#define CONFIG_ETHER_INDEX 4 -#define CONFIG_HAS_ETH0 -#define CONFIG_SYS_SCC_TOUT_LOOP 10000000 - -# define CONFIG_SYS_CMXSCR_VALUE (CMXSCR_RS4CS_CLK7 | CMXSCR_TS4CS_CLK8) - -#ifndef CONFIG_8260_CLKIN -#define CONFIG_8260_CLKIN 66000000 /* in Hz */ -#endif - -#define BOOTFLASH_START FE000000 -#define CONFIG_PRAM 512 /* protected RAM [KBytes] */ - -#define MTDIDS_DEFAULT "nor0=boot,nor1=app" -#define MTDPARTS_DEFAULT \ - "mtdparts=boot:384k(u-boot),128k(env),128k(envred),3456k(free);" \ - "app:3m(esw0),10m(rootfs0),3m(esw1),10m(rootfs1),1m(var),5m(cfg)" - -#ifndef CONFIG_KM_DEF_ENV /* if not set by keymile-common.h */ -#define CONFIG_KM_DEF_ENV "km-common=empty\0" -#endif -/* - * Default environment settings - */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - CONFIG_KM_DEF_ENV \ - "rootpath=/opt/eldk/ppc_82xx\0" \ - "addcon=setenv bootargs ${bootargs} " \ - "console=ttyCPM0,${baudrate}\0" \ - "mtdids=nor0=boot,nor1=app \0" \ - "partition=nor1,5 \0" \ - "new_env=prot off FE060000 FE09FFFF; era FE060000 FE09FFFF \0" \ - "EEprom_ivm=pca9544a:70:4 \0" \ - "mtdparts=" MK_STR(MTDPARTS_DEFAULT) "\0" \ - "unlock=yes\0" \ - "" +#include "km-powerpc.h" #define CONFIG_SYS_SDRAM_BASE 0x00000000 #define CONFIG_SYS_FLASH_BASE 0xFE000000 #define CONFIG_SYS_FLASH_SIZE 32 #define CONFIG_SYS_FLASH_CFI #define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_MAX_FLASH_BANKS 3 /* max num of flash banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max num of sects on one chip */ +#define CONFIG_SYS_MAX_FLASH_BANKS 3 +/* max num of sects on one chip */ +#define CONFIG_SYS_MAX_FLASH_SECT 512 #define CONFIG_SYS_FLASH_BASE_1 0x50000000 #define CONFIG_SYS_FLASH_SIZE_1 32 @@ -124,228 +56,12 @@ #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, \ CONFIG_SYS_FLASH_BASE_1, \ CONFIG_SYS_FLASH_BASE_2 } +#define MTDIDS_DEFAULT "nor3=app" -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -#define CONFIG_SYS_RAMBOOT -#endif - -#define CONFIG_SYS_MONITOR_LEN (384 << 10) /* Reserve 384KB for Monitor */ - -#define CONFIG_ENV_IS_IN_FLASH - -#ifdef CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_SECT_SIZE 0x20000 -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) -#define CONFIG_ENV_OFFSET CONFIG_SYS_MONITOR_LEN - -/* Address and size of Redundant Environment Sector */ -#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) -#endif /* CONFIG_ENV_IS_IN_FLASH */ -#define CONFIG_ENV_BUFFER_PRINT 1 - -/* enable I2C and select the hardware/software driver */ -#undef CONFIG_HARD_I2C /* I2C with hardware support */ -#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */ -#define CONFIG_SYS_I2C_SPEED 50000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F - -/* - * Software (bit-bang) I2C driver configuration - */ - -#define I2C_PORT 3 /* Port A=0, B=1, C=2, D=3 */ -#define I2C_ACTIVE (iop->pdir |= 0x00010000) -#define I2C_TRISTATE (iop->pdir &= ~0x00010000) -#define I2C_READ ((iop->pdat & 0x00010000) != 0) -#define I2C_SDA(bit) if(bit) iop->pdat |= 0x00010000; \ - else iop->pdat &= ~0x00010000 -#define I2C_SCL(bit) if(bit) iop->pdat |= 0x00020000; \ - else iop->pdat &= ~0x00020000 -#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */ - -/* I2C SYSMON (LM75, AD7414 is almost compatible) */ -#define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */ -#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */ -#define CONFIG_SYS_DTT_MAX_TEMP 70 -#define CONFIG_SYS_DTT_LOW_TEMP -30 -#define CONFIG_SYS_DTT_HYSTERESIS 3 -#define CONFIG_SYS_DTT_BUS_NUM (CONFIG_SYS_MAX_I2C_BUS) - -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 - -#define CONFIG_SYS_IMMR 0xF0000000 - -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/* Hard reset configuration word */ -#define CONFIG_SYS_HRCW_MASTER 0x0604b211 - -/* No slaves */ -#define CONFIG_SYS_HRCW_SLAVE1 0 -#define CONFIG_SYS_HRCW_SLAVE2 0 -#define CONFIG_SYS_HRCW_SLAVE3 0 -#define CONFIG_SYS_HRCW_SLAVE4 0 -#define CONFIG_SYS_HRCW_SLAVE5 0 -#define CONFIG_SYS_HRCW_SLAVE6 0 -#define CONFIG_SYS_HRCW_SLAVE7 0 - -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8260 CPUs */ -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -#define CONFIG_SYS_HID0_INIT 0 -#define CONFIG_SYS_HID0_FINAL (HID0_ICE | HID0_IFEM | HID0_ABE) - -#define CONFIG_SYS_HID2 0 - -#define CONFIG_SYS_SIUMCR 0x4020c200 -#define CONFIG_SYS_SYPCR 0xFFFFFFC3 -#define CONFIG_SYS_BCR 0x10000000 -#define CONFIG_SYS_SCCR (SCCR_PCI_MODE | SCCR_PCI_MODCK) - -/*----------------------------------------------------------------------- - * RMR - Reset Mode Register 5-5 - *----------------------------------------------------------------------- - * turn on Checkstop Reset Enable - */ -#define CONFIG_SYS_RMR 0 - -/*----------------------------------------------------------------------- - * TMCNTSC - Time Counter Status and Control 4-40 - *----------------------------------------------------------------------- - * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk, - * and enable Time Counter - */ -#define CONFIG_SYS_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE) - -/*----------------------------------------------------------------------- - * PISCR - Periodic Interrupt Status and Control 4-42 - *----------------------------------------------------------------------- - * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable - * Periodic timer - */ -#define CONFIG_SYS_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE) - -/*----------------------------------------------------------------------- - * RCCR - RISC Controller Configuration 13-7 - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_RCCR 0 - -/* - * Init Memory Controller: - * - * Bank Bus Machine PortSz Device - * ---- --- ------- ------ ------ - * 0 60x GPCM 8 bit FLASH - * 1 60x SDRAM 32 bit SDRAM - * 3 60x GPCM 8 bit GPIO/PIGGY - * 5 60x GPCM 16 bit CFG-Flash - * - */ -/* Bank 0 - FLASH - */ -#define CONFIG_SYS_BR0_PRELIM ((CONFIG_SYS_FLASH_BASE & BRx_BA_MSK) |\ - BRx_PS_8 |\ - BRx_MS_GPCM_P |\ - BRx_V) - -#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) |\ - ORxG_CSNT |\ - ORxG_ACS_DIV2 |\ - ORxG_SCY_5_CLK |\ - ORxG_TRLX ) - - -/* Bank 1 - 60x bus SDRAM - */ -#define SDRAM_MAX_SIZE 0x08000000 /* max. 128 MB */ -#define CONFIG_SYS_GLOBAL_SDRAM_LIMIT (256 << 20) /* less than 256 MB */ - -#define CONFIG_SYS_MPTPR 0x1800 - -/*----------------------------------------------------------------------------- - * Address for Mode Register Set (MRS) command - *----------------------------------------------------------------------------- - */ -#define CONFIG_SYS_MRS_OFFS 0x00000110 -#define CONFIG_SYS_PSRT 0x0e - -#define CONFIG_SYS_BR1_PRELIM ((CONFIG_SYS_SDRAM_BASE & BRx_BA_MSK) |\ - BRx_PS_64 |\ - BRx_MS_SDRAM_P |\ - BRx_V) - -#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_OR1 - -/* SDRAM initialization values -*/ - -#define CONFIG_SYS_OR1 ((~(CONFIG_SYS_GLOBAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\ - ORxS_BPD_8 |\ - ORxS_ROWST_PBI0_A7 |\ - ORxS_NUMR_13) - -#define CONFIG_SYS_PSDMR (PSDMR_SDAM_A14_IS_A5 |\ - PSDMR_BSMA_A14_A16 |\ - PSDMR_SDA10_PBI0_A9 |\ - PSDMR_RFRC_5_CLK |\ - PSDMR_PRETOACT_2W |\ - PSDMR_ACTTORW_2W |\ - PSDMR_LDOTOPRE_1C |\ - PSDMR_WRC_1C |\ - PSDMR_CL_2) - -/* GPIO/PIGGY on CS3 initialization values -*/ -#define CONFIG_SYS_PIGGY_BASE 0x30000000 -#define CONFIG_SYS_PIGGY_SIZE 128 - -#define CONFIG_SYS_BR3_PRELIM ((CONFIG_SYS_PIGGY_BASE & BRx_BA_MSK) |\ - BRx_PS_8 | BRx_MS_GPCM_P | BRx_V) - -#define CONFIG_SYS_OR3_PRELIM (MEG_TO_AM(CONFIG_SYS_PIGGY_SIZE) |\ - ORxG_CSNT | ORxG_ACS_DIV2 |\ - ORxG_SCY_3_CLK | ORxG_TRLX ) - -/* Board FPGA on CS4 initialization values -*/ -#define CONFIG_SYS_FPGA_BASE 0x40000000 -#define CONFIG_SYS_FPGA_SIZE 1 /*1KB*/ - -#define CONFIG_SYS_BR4_PRELIM ((CONFIG_SYS_FPGA_BASE & BRx_BA_MSK) |\ - BRx_PS_8 | BRx_MS_GPCM_P | BRx_V) - -#define CONFIG_SYS_OR4_PRELIM (P2SZ_TO_AM(CONFIG_SYS_FPGA_SIZE << 10) |\ - ORxG_CSNT | ORxG_ACS_DIV2 |\ - ORxG_SCY_3_CLK | ORxG_TRLX ) - -/* CFG-Flash on CS5 initialization values -*/ -#define CONFIG_SYS_BR5_PRELIM ((CONFIG_SYS_FLASH_BASE_1 & BRx_BA_MSK) |\ - BRx_PS_16 | BRx_MS_GPCM_P | BRx_V) - -#define CONFIG_SYS_OR5_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE_1 + \ - CONFIG_SYS_FLASH_SIZE_2) |\ - ORxG_CSNT | ORxG_ACS_DIV2 |\ - ORxG_SCY_5_CLK | ORxG_TRLX ) - -#define CONFIG_SYS_RESET_ADDRESS 0xFDFFFFFC /* "bad" address */ - -/* pass open firmware flat tree */ -#define CONFIG_FIT 1 -#define CONFIG_OF_LIBFDT 1 -#define CONFIG_OF_BOARD_SETUP 1 +/* include further common stuff for all keymile 82xx boards */ +#include "km82xx-common.h" -#define OF_TBCLK (bd->bi_busfreq / 4) -#define OF_STDOUT_PATH "/soc/cpm/serial@11a90" +/* bfticu address */ +#define CONFIG_SYS_BFTICU_BASE 0x40000000 #endif /* __CONFIG_H */ diff --git a/include/configs/mgcoge2ne.h b/include/configs/mgcoge2ne.h new file mode 100644 index 0000000..287b717 --- /dev/null +++ b/include/configs/mgcoge2ne.h @@ -0,0 +1,64 @@ +/* + * (C) Copyright 2007-2010 + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __MGCOGE2NE +#define __MGCOGE2NE + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_MPC8247 +#define CONFIG_MGCOGE +#define CONFIG_HOSTNAME mgcoge2ne + +#define CONFIG_SYS_TEXT_BASE 0xFE000000 + +/* include common defines/options for all Keymile boards */ +#include "keymile-common.h" +#include "km-powerpc.h" + +#define CONFIG_SYS_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_FLASH_BASE 0xFE000000 +#define CONFIG_SYS_FLASH_SIZE 32 +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_MAX_FLASH_BANKS 3 /* max num of flash banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 512 /* + * max num of sects on one + * chip + */ + +#define CONFIG_SYS_FLASH_BASE_1 0x50000000 +#define CONFIG_SYS_FLASH_SIZE_1 64 +#define CONFIG_SYS_FLASH_SIZE_2 0 + +#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, \ + CONFIG_SYS_FLASH_BASE_1 } + +#define MTDIDS_DEFAULT "nor2=app" + +/* include further common stuff for all keymile 82xx boards */ +#include "km82xx-common.h" + +#endif /* __MGCOGE2NE */ diff --git a/include/configs/mgcoge2un.h b/include/configs/mgcoge2un.h new file mode 100644 index 0000000..d3c7bdc --- /dev/null +++ b/include/configs/mgcoge2un.h @@ -0,0 +1,65 @@ +/* + * (C) Copyright 2009 + * Marvell Semiconductor <www.marvell.com> + * Prafulla Wadaskar <prafulla@marvell.com> + * + * (C) Copyright 2009 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * (C) Copyright 2010-2011 + * Holger Brunck, Keymile GmbH Hannover, holger.brunck@keymile.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +/* for linking errors see + * http://lists.denx.de/pipermail/u-boot/2009-July/057350.html */ + +#ifndef _CONFIG_MGCOGE2UN_H +#define _CONFIG_MGCOGE2UN_H + +/* include common defines/options for all arm based Keymile boards */ +#include "km_arm.h" + +/* + * Version number information + */ +#define CONFIG_IDENT_STRING "\nKeymile MGCOGE2UN" + +#define CONFIG_HOSTNAME mgcoge2un + +#define KM_IVM_BUS "pca9547:70:9" /* I2C2 (Mux-Port 1)*/ +#define KM_ENV_BUS "pca9547:70:d" /* I2C2 (Mux-Port 5)*/ + +/* + * Default environment variables + */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + CONFIG_KM_DEF_ENV \ + "newenv=setenv addr 0x100000 && " \ + "i2c dev 1; mw.b ${addr} 0 4 && " \ + "eeprom write " xstr(CONFIG_SYS_DEF_EEPROM_ADDR) \ + " ${addr} " xstr(CONFIG_ENV_OFFSET) " 4 && " \ + "eeprom write " xstr(CONFIG_SYS_DEF_EEPROM_ADDR) \ + " ${addr} " xstr(CONFIG_ENV_OFFSET_REDUND) " 4\0" \ + "rootpath=/opt/eldk/arm\0" \ + "EEprom_ivm=" KM_IVM_BUS "\0" \ + "" + +#endif /* _CONFIG_MGCOGE2UN_H */ diff --git a/include/configs/mp2usb.h b/include/configs/mp2usb.h deleted file mode 100644 index 8e398d7..0000000 --- a/include/configs/mp2usb.h +++ /dev/null @@ -1,242 +0,0 @@ -/* - * 2004-2005 Gary Jennejohn <garyj@denx.de> - * - * Modified for the MP2USB by (C) Copyright 2005 Eric Benard - * ebenard@eukrea.com - * - * Configuration settings for the MP2USB board. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_AT91_LEGACY - -/* ARM asynchronous clock */ -#define AT91C_MAIN_CLOCK 179712000 /* from 18.432 MHz crystal (18432000 / 4 * 45) */ -#define AT91C_MASTER_CLOCK (AT91C_MAIN_CLOCK/3) /* peripheral clock */ - -#define AT91_SLOW_CLOCK 32768 /* slow clock */ - -#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ -#define CONFIG_AT91RM9200 1 /* It's an Atmel AT91RM9200 SoC */ -#define CONFIG_AT91RM9200DK 1 /* on an AT91RM9200DK Board */ -#define CONFIG_MP2USB 1 /* on an MP2USB Board */ -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ -#define USE_920T_MMU 1 - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 - -#define CONFIG_SYS_ATMEL_PLL_INIT_BUG 1 -#ifndef CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SYS_USE_MAIN_OSCILLATOR 1 -/* flash */ -#define CONFIG_SYS_EBI_CFGR_VAL 0x00000000 -#define CONFIG_SYS_SMC_CSR0_VAL 0x00003084 /* 16bit, 2 TDF, 4 WS */ - -/* clocks */ -#define CONFIG_SYS_PLLAR_VAL 0x20263E04 /* 180 MHz for PCK */ -#define CONFIG_SYS_PLLBR_VAL 0x1048bE0E /* 48 MHz (divider by 2 for USB) */ -#define CONFIG_SYS_MCKR_VAL 0x00000202 /* PCK/3 = MCK Master Clock = 60MHz from PLLA */ - -/* sdram */ -#define CONFIG_SYS_PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */ -#define CONFIG_SYS_PIOC_BSR_VAL 0x00000000 -#define CONFIG_SYS_PIOC_PDR_VAL 0xFFFF0000 -#define CONFIG_SYS_EBI_CSA_VAL 0x00000002 /* CS1=CONFIG_SYS_SDRAM */ -#define CONFIG_SYS_SDRC_CR_VAL 0x3211295A /* set up the CONFIG_SYS_SDRAM */ -#define CONFIG_SYS_SDRAM 0x20000000 /* address of the CONFIG_SYS_SDRAM */ -#define CONFIG_SYS_SDRAM1 0x20000020 /* address of the CONFIG_SYS_SDRAM */ -#define CONFIG_SYS_SDRAM_VAL 0x00000000 /* value written to CONFIG_SYS_SDRAM */ -#define CONFIG_SYS_SDRC_MR_VAL 0x00000002 /* Precharge All */ -#define CONFIG_SYS_SDRC_MR_VAL1 0x00000004 /* refresh */ -#define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ -#define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */ -#define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ -#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) - -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_SYS_AT91C_BRGR_DIVISOR 33 /* hardcode so no __divsi3 : AT91C_MASTER_CLOCK /(baudrate * 16) */ - -/* - * Hardware drivers - */ - -/* define one of these to choose the DBGU, USART0 or USART1 as console */ -#define CONFIG_AT91RM9200_USART -#define CONFIG_DBGU -#undef CONFIG_USART0 -#undef CONFIG_USART1 - -#undef CONFIG_HWFLOW /* don't include RTS/CTS flow control support */ - -#undef CONFIG_MODEM_SUPPORT /* disable modem initialization stuff */ - -#define CONFIG_USB_OHCI_NEW 1 -#define CONFIG_USB_KEYBOARD 1 -#define CONFIG_USB_STORAGE 1 -#define CONFIG_DOS_PARTITION 1 -#define CONFIG_AT91C_PQFP_UHPBUG 1 - -#undef CONFIG_SYS_USB_OHCI_BOARD_INIT -#define CONFIG_SYS_USB_OHCI_CPU_INIT 1 -#define CONFIG_SYS_USB_OHCI_REGS_BASE AT91_USB_HOST_BASE -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91rm9200" -#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15 - -#undef CONFIG_HARD_I2C - -#ifdef CONFIG_HARD_I2C -#define CONFIG_SYS_I2C_SPEED 0 /* not used */ -#define CONFIG_SYS_I2C_SLAVE 0 /* not used */ -#define CONFIG_RTC_RS5C372A /* RICOH I2C RTC */ -#define CONFIG_SYS_I2C_RTC_ADDR 0x32 -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW -#endif -/* still about 20 kB free with this defined */ -#define CONFIG_SYS_LONGHELP - -#define CONFIG_BOOTDELAY 3 - -#if !defined(CONFIG_HARD_I2C) -#define CONFIG_TIMESTAMP -#endif - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_NFS -#define CONFIG_CMD_SNTP - -#if defined(CONFIG_HARD_I2C) - - #define CONFIG_CMD_DATE - #define CONFIG_CMD_EEPROM - #define CONFIG_CMD_I2C - #define CONFIG_CMD_MISC - -#else - - #define CONFIG_CMD_CACHE - #define CONFIG_CMD_USB - - #undef CONFIG_CMD_BDI - #undef CONFIG_CMD_FPGA - #undef CONFIG_CMD_IMI - #undef CONFIG_CMD_LOADS - #undef CONFIG_CMD_MISC - #undef CONFIG_CMD_SOURCE - -#endif - - -#define CONFIG_SYS_LONGHELP - -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM 0x20000000 -#define PHYS_SDRAM_SIZE 0x08000000 /* 128 megs */ - -#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM -#define CONFIG_SYS_MEMTEST_END CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 262144 - -#define CONFIG_NET_MULTI 1 -#ifdef CONFIG_NET_MULTI -#define CONFIG_DRIVER_AT91EMAC 1 -#define CONFIG_SYS_RX_ETH_BUFFER 8 -#else -#define CONFIG_DRIVER_ETHER 1 -#endif -#define CONFIG_NET_RETRY_COUNT 20 -#undef CONFIG_AT91C_USE_RMII - -#define PHYS_FLASH_1 0x10000000 -#define PHYS_FLASH_SIZE 0x1000000 /* 16 megs main flash */ -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_MAX_FLASH_SECT 256 -#define CONFIG_SYS_FLASH_ERASE_TOUT (2 * CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (2 * CONFIG_SYS_HZ) /* Timeout for Flash Write */ -#define CONFIG_SYS_FLASH_LOCK_TOUT (10*CONFIG_SYS_HZ) /* Timeout for Flash Set Lock Bit */ -#define CONFIG_SYS_FLASH_UNLOCK_TOUT (10*CONFIG_SYS_HZ) /* Timeout for Flash Clear Lock Bits */ -#define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ - -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_OFFSET 0x20000 /* after u-boot.bin */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE+CONFIG_ENV_OFFSET) -#define CONFIG_ENV_SIZE 0x20000 - -#define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */ - -#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 57600, 38400, 19200, 9600 } - -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_MAXARGS 32 /* max number of command args */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ - -#define CONFIG_SYS_STDIO_DEREGISTER /* needs stdio_deregister */ - -#define CONFIG_SYS_HZ 1000 -#define CONFIG_SYS_HZ_CLOCK (AT91C_MASTER_CLOCK/2) /* AT91C_TC0_CMR is implicitly set to */ - /* AT91C_TC_TIMER_DIV1_CLOCK */ - -#define CONFIG_STACKSIZE (32*1024) /* regular stack */ - -#ifdef CONFIG_USE_IRQ -#error CONFIG_USE_IRQ not supported -#endif - -#define CONFIG_SYS_DEVICE_NULLDEV 1 /* enble null device */ -#undef CONFIG_SILENT_CONSOLE /* enable silent startup */ - -#define CONFIG_AUTOBOOT_KEYED -#define CONFIG_AUTOBOOT_PROMPT \ - "Press SPACE to abort autoboot in %d seconds\n", bootdelay -#define CONFIG_AUTOBOOT_STOP_STR " " -#define CONFIG_AUTOBOOT_DELAY_STR "d" - -#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ - -#endif /* __CONFIG_H */ diff --git a/include/configs/mpc5121ads.h b/include/configs/mpc5121ads.h index f966325..e7ef298 100644 --- a/include/configs/mpc5121ads.h +++ b/include/configs/mpc5121ads.h @@ -46,16 +46,16 @@ */ #define CONFIG_E300 1 /* E300 Family */ #define CONFIG_MPC512X 1 /* MPC512X family */ -#define CONFIG_FSL_DIU_FB 1 /* FSL DIU */ #define CONFIG_SYS_TEXT_BASE 0xFFF00000 /* video */ -#undef CONFIG_VIDEO - -#ifdef CONFIG_VIDEO +#ifdef CONFIG_FSL_DIU_FB +#define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_IMMR + 0x2100) +#define CONFIG_VIDEO #define CONFIG_CMD_BMP #define CONFIG_CFB_CONSOLE +#define CONFIG_VIDEO_SW_CURSOR #define CONFIG_VGA_AS_SINGLE_DEVICE #define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO @@ -74,7 +74,6 @@ #define CONFIG_MISC_INIT_R #define CONFIG_SYS_IMMR 0x80000000 -#define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_IMMR+0x2100) #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest region */ #define CONFIG_SYS_MEMTEST_END 0x00400000 diff --git a/include/configs/mx31ads.h b/include/configs/mx31ads.h index d2798e97..5ea59b4 100644 --- a/include/configs/mx31ads.h +++ b/include/configs/mx31ads.h @@ -22,7 +22,7 @@ #ifndef __CONFIG_H #define __CONFIG_H -#include <asm/arch/mx31-regs.h> +#include <asm/arch/imx-regs.h> /* High Level Configuration Options */ #define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */ diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h index 86c758f..d4c6d16 100644 --- a/include/configs/mx31pdk.h +++ b/include/configs/mx31pdk.h @@ -30,7 +30,7 @@ #ifndef __CONFIG_H #define __CONFIG_H -#include <asm/arch/mx31-regs.h> +#include <asm/arch/imx-regs.h> /* High Level Configuration Options */ #define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */ diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h index 591d6e1..6a785f8 100644 --- a/include/configs/mx51evk.h +++ b/include/configs/mx51evk.h @@ -33,6 +33,8 @@ #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO +#define CONFIG_SYS_TEXT_BASE 0x97800000 + #define CONFIG_L2_OFF #include <asm/arch/imx-regs.h> @@ -46,6 +48,8 @@ #define CONFIG_SETUP_MEMORY_TAGS 1 #define CONFIG_INITRD_TAG 1 +#define CONFIG_OF_LIBFDT 1 + /* * Size of malloc() pool */ @@ -222,4 +226,7 @@ #define CONFIG_ENV_IS_IN_MMC #define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_OF_LIBFDT +#define CONFIG_SYS_BOOTMAPSZ 0x800000 + #endif diff --git a/include/configs/mx53evk.h b/include/configs/mx53evk.h index f2a5752..5749a08 100644 --- a/include/configs/mx53evk.h +++ b/include/configs/mx53evk.h @@ -38,6 +38,8 @@ #define CONFIG_SETUP_MEMORY_TAGS 1 #define CONFIG_INITRD_TAG 1 +#define CONFIG_OF_LIBFDT 1 + /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024) @@ -190,4 +192,7 @@ #define CONFIG_ENV_IS_IN_MMC #define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_OF_LIBFDT +#define CONFIG_SYS_BOOTMAPSZ 0x800000 + #endif /* __CONFIG_H */ diff --git a/include/configs/nhk8815.h b/include/configs/nhk8815.h index 49a16ab..758f19d 100644 --- a/include/configs/nhk8815.h +++ b/include/configs/nhk8815.h @@ -80,6 +80,11 @@ #define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ #define PHYS_SDRAM_2 0x08000000 /* SDR-SDRAM BANK #2*/ #define PHYS_SDRAM_2_SIZE 0x04000000 /* 64 MB */ +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 +#define CONFIG_SYS_SDRAM_SIZE (PHYS_SDRAM_1_SIZE + PHYS_SDRAM_2_SIZE) +/* The IPL loads us at 0, tell so to u-boot. Put stack pointer 1M into RAM */ +#define CONFIG_SYS_TEXT_BASE 0x00000000 +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + (1<<20)) #define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ #ifdef CONFIG_USE_IRQ diff --git a/include/configs/omap2420h4.h b/include/configs/omap2420h4.h index 7161ab1..2888c7b 100644 --- a/include/configs/omap2420h4.h +++ b/include/configs/omap2420h4.h @@ -38,6 +38,8 @@ /*#define CONFIG_APTIX 1 #* define if on APTIX test chip */ /*#define CONFIG_VIRTIO 1 #* Using Virtio simulator */ +#define CONFIG_STANDALONE_LOAD_ADDR 0x80300000 + /* Clock config to target*/ #define PRCM_CONFIG_II 1 /* #define PRCM_CONFIG_III 1 */ diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index 5cfa4cb..bc3c45b 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -56,13 +56,6 @@ #define CONFIG_MISC_INIT_R #define CONFIG_OF_LIBFDT 1 -/* - * The early kernel mapping on ARM currently only maps from the base of DRAM - * to the end of the kernel image. The kernel is loaded at DRAM base + 0x8000. - * The early kernel pagetable uses DRAM base + 0x4000 to DRAM base + 0x8000, - * so that leaves DRAM base to DRAM base + 0x4000 available. - */ -#define CONFIG_SYS_BOOTMAPSZ 0x4000 #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS 1 @@ -108,6 +101,18 @@ #define CONFIG_OMAP_HSMMC 1 #define CONFIG_DOS_PARTITION 1 +/* Status LED */ +#define CONFIG_STATUS_LED 1 +#define CONFIG_BOARD_SPECIFIC_LED 1 +#define STATUS_LED_BIT 0x01 +#define STATUS_LED_STATE STATUS_LED_ON +#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) +#define STATUS_LED_BIT1 0x02 +#define STATUS_LED_STATE1 STATUS_LED_ON +#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2) +#define STATUS_LED_BOOT STATUS_LED_BIT +#define STATUS_LED_GREEN STATUS_LED_BIT1 + /* DDR - I use Micron DDR */ #define CONFIG_OMAP3_MICRON_DDR 1 @@ -121,6 +126,11 @@ #define CONFIG_USB_TTY 1 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 +/* USB EHCI */ +#define CONFIG_CMD_USB +#define CONFIG_USB_EHCI +#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 + /* commands to include */ #include <config_cmd_default.h> @@ -137,7 +147,9 @@ #define CONFIG_CMD_I2C /* I2C serial bus support */ #define CONFIG_CMD_MMC /* MMC support */ +#define CONFIG_USB_STORAGE /* USB storage support */ #define CONFIG_CMD_NAND /* NAND support */ +#define CONFIG_CMD_LED /* LED support */ #undef CONFIG_CMD_FLASH /* flinfo, erase, protect */ #undef CONFIG_CMD_FPGA /* FPGA configuration Support */ @@ -190,7 +202,7 @@ "loadaddr=0x82000000\0" \ "usbtty=cdc_acm\0" \ "console=ttyS2,115200n8\0" \ - "mpurate=500\0" \ + "mpurate=auto\0" \ "vram=12M\0" \ "dvimode=1024x768MR-16@60\0" \ "defaultdisplay=dvi\0" \ @@ -215,9 +227,9 @@ "omapdss.def_disp=${defaultdisplay} " \ "root=${nandroot} " \ "rootfstype=${nandrootfstype}\0" \ - "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ - "bootscript=echo Running bootscript from mmc ...; " \ - "source ${loadaddr}\0" \ + "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \ + "importbootenv=echo Importing environment from mmc ...; " \ + "env import -t $loadaddr $filesize\0" \ "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ "mmcboot=echo Booting from mmc ...; " \ "run mmcargs; " \ @@ -229,15 +241,19 @@ #define CONFIG_BOOTCOMMAND \ "if mmc rescan ${mmcdev}; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loaduimage; then " \ - "run mmcboot; " \ - "else run nandboot; " \ - "fi; " \ - "fi; " \ - "else run nandboot; fi" + "echo SD/MMC found on device ${mmcdev};" \ + "if run loadbootenv; then " \ + "run importbootenv;" \ + "fi;" \ + "if test -n $uenvcmd; then " \ + "echo Running uenvcmd ...;" \ + "run uenvcmd;" \ + "fi;" \ + "if run loaduimage; then " \ + "run mmcboot;" \ + "fi;" \ + "fi;" \ + "run nandboot;" \ #define CONFIG_AUTO_COMPLETE 1 /* @@ -306,7 +322,9 @@ #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ -#define CONFIG_SYS_FLASH_BASE boot_flash_base +#if defined(CONFIG_CMD_NAND) +#define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE +#endif /* Monitor at start of flash */ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE @@ -316,18 +334,10 @@ #define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */ #define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ -#define CONFIG_SYS_ENV_SECT_SIZE boot_flash_sec -#define CONFIG_ENV_OFFSET boot_flash_off +#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ +#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET #define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET -#ifndef __ASSEMBLY__ -extern unsigned int boot_flash_base; -extern volatile unsigned int boot_flash_env_addr; -extern unsigned int boot_flash_off; -extern unsigned int boot_flash_sec; -extern unsigned int boot_flash_type; -#endif - #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 #define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 #define CONFIG_SYS_INIT_RAM_SIZE 0x800 diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h index 5bdb3fd..5ec079c 100644 --- a/include/configs/omap3_evm.h +++ b/include/configs/omap3_evm.h @@ -298,33 +298,31 @@ #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ -#define CONFIG_SYS_FLASH_BASE boot_flash_base +#if defined(CONFIG_CMD_NAND) +#define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE +#elif defined(CONFIG_CMD_ONENAND) +#define CONFIG_SYS_FLASH_BASE PISMO1_ONEN_BASE +#endif /* Monitor at start of flash */ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE #define CONFIG_SYS_ONENAND_BASE ONENAND_MAP +#define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */ +#define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ + #if defined(CONFIG_CMD_NAND) #define CONFIG_NAND_OMAP_GPMC #define GPMC_NAND_ECC_LP_x16_LAYOUT 1 #define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET #elif defined(CONFIG_CMD_ONENAND) #define CONFIG_ENV_IS_IN_ONENAND 1 +#define CONFIG_ENV_OFFSET ONENAND_ENV_OFFSET #endif -#define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */ -#define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ -#define CONFIG_SYS_ENV_SECT_SIZE boot_flash_sec -#define CONFIG_ENV_OFFSET boot_flash_off -#define CONFIG_ENV_ADDR boot_flash_env_addr - -#ifndef __ASSEMBLY__ -extern unsigned int boot_flash_base; -extern volatile unsigned int boot_flash_env_addr; -extern unsigned int boot_flash_off; -extern unsigned int boot_flash_sec; -extern unsigned int boot_flash_type; -#endif +#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ +#define CONFIG_ENV_ADDR CONFIG_ENV_OFFSET /* * Support for relocation diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h index 1b3d439..c5e997c 100644 --- a/include/configs/omap3_overo.h +++ b/include/configs/omap3_overo.h @@ -52,6 +52,8 @@ #define CONFIG_INITRD_TAG 1 #define CONFIG_REVISION_TAG 1 +#define CONFIG_OF_LIBFDT 1 + /* * Size of malloc() pool */ @@ -271,7 +273,9 @@ #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ -#define CONFIG_SYS_FLASH_BASE boot_flash_base +#if defined(CONFIG_CMD_NAND) +#define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE +#endif /* Monitor at start of flash */ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE @@ -281,18 +285,10 @@ #define ONENAND_ENV_OFFSET 0x240000 /* environment starts here */ #define SMNAND_ENV_OFFSET 0x240000 /* environment starts here */ -#define CONFIG_SYS_ENV_SECT_SIZE boot_flash_sec -#define CONFIG_ENV_OFFSET boot_flash_off +#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ +#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET #define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET -#ifndef __ASSEMBLY__ -extern unsigned int boot_flash_base; -extern volatile unsigned int boot_flash_env_addr; -extern unsigned int boot_flash_off; -extern unsigned int boot_flash_sec; -extern unsigned int boot_flash_type; -#endif - #if defined(CONFIG_CMD_NET) /*---------------------------------------------------------------------------- * SMSC9211 Ethernet from SMSC9118 family diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h index 72b0cc2..39c87a8 100644 --- a/include/configs/omap3_pandora.h +++ b/include/configs/omap3_pandora.h @@ -55,6 +55,8 @@ #define CONFIG_INITRD_TAG 1 #define CONFIG_REVISION_TAG 1 +#define CONFIG_OF_LIBFDT 1 + /* * Size of malloc() pool */ @@ -262,7 +264,9 @@ #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ -#define CONFIG_SYS_FLASH_BASE boot_flash_base +#if defined(CONFIG_CMD_NAND) +#define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE +#endif /* Monitor at start of flash */ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE @@ -270,16 +274,8 @@ #define CONFIG_ENV_IS_IN_NAND 1 #define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ -#define CONFIG_SYS_ENV_SECT_SIZE boot_flash_sec -#define CONFIG_ENV_OFFSET boot_flash_off +#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ +#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET #define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET -#ifndef __ASSEMBLY__ -extern unsigned int boot_flash_base; -extern volatile unsigned int boot_flash_env_addr; -extern unsigned int boot_flash_off; -extern unsigned int boot_flash_sec; -extern unsigned int boot_flash_type; -#endif - #endif /* __CONFIG_H */ diff --git a/include/configs/omap3_sdp3430.h b/include/configs/omap3_sdp3430.h index 4708981..1d6ba7f 100644 --- a/include/configs/omap3_sdp3430.h +++ b/include/configs/omap3_sdp3430.h @@ -71,6 +71,8 @@ #define CONFIG_INITRD_TAG 1 #define CONFIG_REVISION_TAG 1 +#define CONFIG_OF_LIBFDT 1 + /* * Size of malloc() pool * Total Size Environment - 256k @@ -358,14 +360,4 @@ * - rest for filesystem */ -/*--------------------------------------------------------------------------*/ - -#ifndef __ASSEMBLY__ -extern unsigned int boot_flash_base; -extern volatile unsigned int boot_flash_env_addr; -extern unsigned int boot_flash_off; -extern unsigned int boot_flash_sec; -extern unsigned int boot_flash_type; -#endif - #endif /* __CONFIG_H */ diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h index f7d0652..5adffb5 100644 --- a/include/configs/omap3_zoom1.h +++ b/include/configs/omap3_zoom1.h @@ -61,6 +61,8 @@ #define CONFIG_INITRD_TAG 1 #define CONFIG_REVISION_TAG 1 +#define CONFIG_OF_LIBFDT 1 + /* * Size of malloc() pool */ @@ -285,7 +287,9 @@ #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ -#define CONFIG_SYS_FLASH_BASE boot_flash_base +#if defined(CONFIG_CMD_NAND) +#define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE +#endif /* Monitor at start of flash */ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE @@ -295,16 +299,8 @@ #define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */ #define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ -#define CONFIG_SYS_ENV_SECT_SIZE boot_flash_sec -#define CONFIG_ENV_OFFSET boot_flash_off +#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ +#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET #define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET -#ifndef __ASSEMBLY__ -extern unsigned int boot_flash_base; -extern volatile unsigned int boot_flash_env_addr; -extern unsigned int boot_flash_off; -extern unsigned int boot_flash_sec; -extern unsigned int boot_flash_type; -#endif - #endif /* __CONFIG_H */ diff --git a/include/configs/omap3_zoom2.h b/include/configs/omap3_zoom2.h index 7377933..747c69d 100644 --- a/include/configs/omap3_zoom2.h +++ b/include/configs/omap3_zoom2.h @@ -62,6 +62,8 @@ #define CONFIG_INITRD_TAG 1 #define CONFIG_REVISION_TAG 1 +#define CONFIG_OF_LIBFDT 1 + /* * Size of malloc() pool */ @@ -254,7 +256,9 @@ #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ -#define CONFIG_SYS_FLASH_BASE boot_flash_base +#if defined(CONFIG_CMD_NAND) +#define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE +#endif /* Monitor at start of flash */ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE @@ -262,16 +266,8 @@ #define CONFIG_ENV_IS_IN_NAND 1 #define SMNAND_ENV_OFFSET 0x0c0000 /* environment starts here */ -#define CONFIG_SYS_ENV_SECT_SIZE boot_flash_sec -#define CONFIG_ENV_OFFSET boot_flash_off +#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ +#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET #define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET -#ifndef __ASSEMBLY__ -extern unsigned int boot_flash_base; -extern volatile unsigned int boot_flash_env_addr; -extern unsigned int boot_flash_off; -extern unsigned int boot_flash_sec; -extern unsigned int boot_flash_type; -#endif - #endif /* __CONFIG_H */ diff --git a/include/configs/omap4_panda.h b/include/configs/omap4_panda.h index 2b03b0f..ffcc9aa 100644 --- a/include/configs/omap4_panda.h +++ b/include/configs/omap4_panda.h @@ -60,6 +60,8 @@ #define CONFIG_INITRD_TAG 1 #define CONFIG_REVISION_TAG 1 +#define CONFIG_OF_LIBFDT 1 + /* * Size of malloc() pool * Total Size Environment - 256k diff --git a/include/configs/omap4_sdp4430.h b/include/configs/omap4_sdp4430.h index 9a8bb73..8d04d07 100644 --- a/include/configs/omap4_sdp4430.h +++ b/include/configs/omap4_sdp4430.h @@ -56,6 +56,8 @@ #undef CONFIG_USE_IRQ /* no support for IRQs */ #define CONFIG_MISC_INIT_R +#define CONFIG_OF_LIBFDT 1 + #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS 1 #define CONFIG_INITRD_TAG 1 diff --git a/include/configs/pdm360ng.h b/include/configs/pdm360ng.h index 37a22a7..831af6a 100644 --- a/include/configs/pdm360ng.h +++ b/include/configs/pdm360ng.h @@ -64,8 +64,6 @@ #define CONFIG_SPLASH_SCREEN #define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_RLE8 -#define CONFIG_VIDEO_XRES 800 -#define CONFIG_VIDEO_YRES 480 #endif #define CONFIG_SYS_MPC512X_CLKIN 33333333 /* in Hz */ diff --git a/include/configs/purple.h b/include/configs/purple.h deleted file mode 100644 index 25d8ebe..0000000 --- a/include/configs/purple.h +++ /dev/null @@ -1,173 +0,0 @@ -/* - * (C) Copyright 2003 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * This file contains the configuration parameters for the PURPLE board. - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_MIPS32 1 /* MIPS 5Kc CPU core */ -#define CONFIG_PURPLE 1 /* on a PURPLE Board */ - -#define CPU_CLOCK_RATE 125000000 /* 125 MHz clock for the MIPS core */ -#define ASC_CLOCK_RATE 62500000 /* 62.5 MHz ASC clock */ - -#define INFINEON_EBU_BOOTCFG 0xE0CC - -#define CONFIG_STACKSIZE (128 * 1024) - -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ - -#define CONFIG_BAUDRATE 19200 - -/* valid baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - -#define CONFIG_TIMESTAMP /* Print image info with timestamp */ - -#define CONFIG_PREBOOT "echo;" \ - "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \ - "echo" - -#undef CONFIG_BOOTARGS - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off\0" \ - "addmisc=setenv bootargs ${bootargs} " \ - "console=ttyS0,${baudrate} " \ - "ethaddr=${ethaddr} " \ - "panic=1\0" \ - "flash_nfs=run nfsargs addip addmisc;" \ - "bootm ${kernel_addr}\0" \ - "flash_self=run ramargs addip addmisc;" \ - "bootm ${kernel_addr} ${ramdisk_addr}\0" \ - "net_nfs=tftp 80500000 ${bootfile};" \ - "run nfsargs addip addmisc;bootm\0" \ - "rootpath=/opt/eldk/mips_5KC\0" \ - "bootfile=/tftpboot/purple/uImage\0" \ - "kernel_addr=B0040000\0" \ - "ramdisk_addr=B0100000\0" \ - "u-boot=/tftpboot/purple/u-boot.bin\0" \ - "load=tftp 80500000 ${u-boot}\0" \ - "update=protect off 1:0-4;era 1:0-4;" \ - "cp.b 80500000 B0000000 ${filesize}\0" \ - "" -#define CONFIG_BOOTCOMMAND "run flash_self" - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_ELF - - -#define CONFIG_SYS_SDRAM_BASE 0x80000000 - -#define CONFIG_SYS_INIT_SP_OFFSET 0x400000 - -#define CONFIG_SYS_MALLOC_LEN 128*1024 - -#define CONFIG_SYS_BOOTPARAMS_LEN 128*1024 - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "PURPLE # " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MIPS_TIMER_FREQ (CPU_CLOCK_RATE/2) -#define CONFIG_SYS_HZ 1000 -#define CONFIG_SYS_MAXARGS 16 /* max number of command args*/ - -#define CONFIG_SYS_LOAD_ADDR 0x80500000 /* default load address */ - -#define CONFIG_SYS_MEMTEST_START 0x80200000 -#define CONFIG_SYS_MEMTEST_END 0x80800000 - -#define CONFIG_MISC_INIT_R - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT (35) /* max number of sectors on one chip */ - -#define PHYS_FLASH_1 0xb0000000 /* Flash Bank #1 */ - -/* The following #defines are needed to get flash environment right */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_MONITOR_LEN (192 << 10) - -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 - -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (6 * CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (6 * CONFIG_SYS_HZ) /* Timeout for Flash Write */ - -#define CONFIG_ENV_IS_IN_FLASH 1 - -/* Address and size of Primary Environment Sector */ -#define CONFIG_ENV_ADDR 0xB0008000 -#define CONFIG_ENV_SIZE 0x4000 - -#define CONFIG_FLASH_32BIT -#define CONFIG_NR_DRAM_BANKS 1 - -#define CONFIG_PLB2800_ETHER -#define CONFIG_NET_MULTI - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_DCACHE_SIZE 16384 -#define CONFIG_SYS_ICACHE_SIZE 16384 -#define CONFIG_SYS_CACHELINE_SIZE 32 - -/* - * Temporary buffer for serial data until the real serial driver - * is initialised (memtest will destroy this buffer) - */ -#define CONFIG_SYS_SCONSOLE_ADDR (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_INIT_SP_OFFSET - \ - CONFIG_SYS_DCACHE_SIZE / 2) -#define CONFIG_SYS_SCONSOLE_SIZE (CONFIG_SYS_DCACHE_SIZE / 4) - -#endif /* __CONFIG_H */ diff --git a/include/configs/qong.h b/include/configs/qong.h index e2f7a5e..c61a689 100644 --- a/include/configs/qong.h +++ b/include/configs/qong.h @@ -22,7 +22,7 @@ #ifndef __CONFIG_H #define __CONFIG_H -#include <asm/arch/mx31-regs.h> +#include <asm/arch/imx-regs.h> /* High Level Configuration Options */ #define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */ @@ -52,6 +52,7 @@ #define CONFIG_SYS_MX31_UART1 1 #define CONFIG_MXC_GPIO +#define CONFIG_HW_WATCHDOG #define CONFIG_MXC_SPI #define CONFIG_DEFAULT_SPI_BUS 1 diff --git a/include/configs/seaboard.h b/include/configs/seaboard.h index 59eef56..06ce3e2 100644 --- a/include/configs/seaboard.h +++ b/include/configs/seaboard.h @@ -40,4 +40,5 @@ #define CONFIG_MACH_TYPE MACH_TYPE_SEABOARD #define CONFIG_SYS_BOARD_ODMDATA 0x300d8011 /* lp1, 1GB */ +#define CONFIG_BOARD_EARLY_INIT_F #endif /* __CONFIG_H */ diff --git a/include/configs/suen3.h b/include/configs/suen3.h index b2730a3..2b6f19e 100644 --- a/include/configs/suen3.h +++ b/include/configs/suen3.h @@ -43,53 +43,14 @@ #define CONFIG_HOSTNAME suen3 -/* - * Environment variables configurations - */ -#define CONFIG_ENV_IS_IN_EEPROM /* use EEPROM for environment vars */ -#define CONFIG_SYS_DEF_EEPROM_ADDR 0x50 -#define CONFIG_ENV_EEPROM_IS_ON_I2C 1 -#define CONFIG_SYS_EEPROM_WREN 1 -#define CONFIG_ENV_OFFSET 0x0 /* no bracets! */ -#undef CONFIG_ENV_SIZE -#define CONFIG_ENV_SIZE (0x2000 - CONFIG_ENV_OFFSET) -#define CONFIG_I2C_ENV_EEPROM_BUS "pca9547:70:d\0" - -/* offset redund: (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) */ -#define CONFIG_SYS_REDUNDAND_ENVIRONMENT -#define CONFIG_ENV_OFFSET_REDUND 0x2000 /* no bracets! */ -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) - -#define CONFIG_CMD_SF - -#define CONFIG_SPI_FLASH -#define CONFIG_HARD_SPI -#define CONFIG_KIRKWOOD_SPI -#define CONFIG_SPI_FLASH_STMICRO -#define CONFIG_ENV_SPI_BUS 0 -#define CONFIG_ENV_SPI_CS 0 -#define CONFIG_ENV_SPI_MAX_HZ 50000000 /* 50Mhz */ - -#define FLASH_GPIO_PIN 0x00010000 - -#define MTDIDS_DEFAULT "nand0=orion_nand" -/* test-only: partitioning needs some tuning, this is just for tests */ -#define MTDPARTS_DEFAULT "mtdparts=" \ - "orion_nand:" \ - "-(" CONFIG_KM_UBI_PARTITION_NAME ")" - -#define CONFIG_KM_DEF_ENV_UPDATE \ - "update=" \ - "spi on;sf probe 0;sf erase 0 50000;" \ - "sf write ${u-boot_addr_r} 0 ${filesize};" \ - "spi off\0" +#define KM_IVM_BUS "pca9544a:70:9" /* I2C2 (Mux-Port 1)*/ +#define KM_ENV_BUS "pca9544a:70:d" /* I2C2 (Mux-Port 5)*/ /* * Default environment variables */ #define CONFIG_EXTRA_ENV_SETTINGS \ CONFIG_KM_DEF_ENV \ - "memsize=0x8000000\0" \ "newenv=setenv addr 0x100000 && " \ "i2c dev 1; mw.b ${addr} 0 4 && " \ "eeprom write " xstr(CONFIG_SYS_DEF_EEPROM_ADDR) \ @@ -97,7 +58,7 @@ "eeprom write " xstr(CONFIG_SYS_DEF_EEPROM_ADDR) \ " ${addr} " xstr(CONFIG_ENV_OFFSET_REDUND) " 4\0" \ "rootpath=/opt/eldk/arm\0" \ - "EEprom_ivm=pca9544a:70:9\0" \ + "EEprom_ivm=" KM_IVM_BUS "\0" \ "" #endif /* _CONFIG_SUEN3_H */ diff --git a/include/configs/suen8.h b/include/configs/suen8.h new file mode 100644 index 0000000..3f60bc3 --- /dev/null +++ b/include/configs/suen8.h @@ -0,0 +1,65 @@ +/* + * (C) Copyright 2009 + * Marvell Semiconductor <www.marvell.com> + * Prafulla Wadaskar <prafulla@marvell.com> + * + * (C) Copyright 2009 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * (C) Copyright 2010-2011 + * Holger Brunck, Keymile GmbH Hannover, holger.brunck@keymile.com. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +/* for linking errors see + * http://lists.denx.de/pipermail/u-boot/2009-July/057350.html */ + +#ifndef _CONFIG_SUEN8_H +#define _CONFIG_SUEN8_H + +/* include common defines/options for all arm based Keymile boards */ +#include "km_arm.h" + +/* + * Version number information + */ +#define CONFIG_IDENT_STRING "\nKeymile SUEN8" + +#define CONFIG_HOSTNAME suen8 + +#define KM_IVM_BUS "pca9544a:70:9" /* I2C2 (Mux-Port 1)*/ +#define KM_ENV_BUS "pca9544a:70:d" /* I2C2 (Mux-Port 5)*/ + +/* + * Default environment variables + */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + CONFIG_KM_DEF_ENV \ + "newenv=setenv addr 0x100000 && " \ + "i2c dev 1; mw.b ${addr} 0 4 && " \ + "eeprom write " xstr(CONFIG_SYS_DEF_EEPROM_ADDR) \ + " ${addr} " xstr(CONFIG_ENV_OFFSET) " 4 && " \ + "eeprom write " xstr(CONFIG_SYS_DEF_EEPROM_ADDR) \ + " ${addr} " xstr(CONFIG_ENV_OFFSET_REDUND) " 4\0" \ + "rootpath=/opt/eldk/arm\0" \ + "EEprom_ivm=" KM_IVM_BUS "\0" \ + "" + +#endif /* _CONFIG_SUEN8_H */ diff --git a/include/configs/suvd3.h b/include/configs/suvd3.h new file mode 100644 index 0000000..d9eb201 --- /dev/null +++ b/include/configs/suvd3.h @@ -0,0 +1,104 @@ +/* + * Copyright (C) 2006 Freescale Semiconductor, Inc. + * Dave Liu <daveliu@freescale.com> + * + * Copyright (C) 2007 Logic Product Development, Inc. + * Peter Barada <peterb@logicpd.com> + * + * Copyright (C) 2007 MontaVista Software, Inc. + * Anton Vorontsov <avorontsov@ru.mvista.com> + * + * (C) Copyright 2010 + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ +#define CONFIG_SUVD3 /* SUVD3 board specific */ +#define CONFIG_HOSTNAME suvd3 +#define CONFIG_KM_BOARD_NAME "suvd3" + +#define CONFIG_SYS_TEXT_BASE 0xF0000000 + +/* include common defines/options for all 8321 Keymile boards */ +#include "km8321-common.h" + +#define CONFIG_SYS_APP1_BASE 0xA0000000 +#define CONFIG_SYS_APP1_SIZE 256 /* Megabytes */ +#define CONFIG_SYS_APP2_BASE 0xB0000000 +#define CONFIG_SYS_APP2_SIZE 256 /* Megabytes */ + +/* EEprom support */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 + +/* + * Init Local Bus Memory Controller: + * + * Bank Bus Machine PortSz Size Device + * ---- --- ------- ------ ----- ------ + * 2 Local UPMA 16 bit 256MB APP1 + * 3 Local GPCM 16 bit 256MB APP2 + * + */ + +/* + * APP1 on the local bus CS2 + */ +#define CONFIG_SYS_LBLAWBAR2_PRELIM CONFIG_SYS_APP1_BASE +#define CONFIG_SYS_LBLAWAR2_PRELIM (LBLAWAR_EN | LBLAWAR_256MB) + +#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_APP1_BASE | \ + BR_PS_16 | \ + BR_MS_UPMA | \ + BR_V) +#define CONFIG_SYS_OR2_PRELIM (MEG_TO_AM(CONFIG_SYS_APP1_SIZE)) + +#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_APP2_BASE | \ + BR_PS_16 | \ + BR_V) + +#define CONFIG_SYS_OR3_PRELIM (MEG_TO_AM(CONFIG_SYS_APP2_SIZE) | \ + OR_GPCM_CSNT | \ + OR_GPCM_ACS_DIV4 | \ + OR_GPCM_SCY_3 | \ + OR_GPCM_TRLX) + +#define CONFIG_SYS_MAMR (MxMR_GPL_x4DIS | \ + 0x0000c000 | \ + MxMR_WLFx_2X) + +#define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_APP2_BASE +#define CONFIG_SYS_LBLAWAR3_PRELIM (LBLAWAR_EN | LBLAWAR_256MB) + +/* + * MMU Setup + */ + + +/* APP1: icache cacheable, but dcache-inhibit and guarded */ +#define CONFIG_SYS_IBAT5L (CONFIG_SYS_APP1_BASE | BATL_PP_10 | \ + BATL_MEMCOHERENCE) +#define CONFIG_SYS_IBAT5U (CONFIG_SYS_APP1_BASE | BATU_BL_256M | \ + BATU_VS | BATU_VP) +#define CONFIG_SYS_DBAT5L (CONFIG_SYS_APP1_BASE | BATL_PP_10 | \ + BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U + +#define CONFIG_SYS_IBAT6L (CONFIG_SYS_APP2_BASE | BATL_PP_10 | \ + BATL_MEMCOHERENCE) +#define CONFIG_SYS_IBAT6U (CONFIG_SYS_APP2_BASE | BATU_BL_256M | \ + BATU_VS | BATU_VP) +#define CONFIG_SYS_DBAT6L (CONFIG_SYS_APP2_BASE | BATL_PP_10 | \ + BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U + +#endif /* __CONFIG_H */ diff --git a/include/configs/tcm-bf518.h b/include/configs/tcm-bf518.h index 042d789..52055e8 100644 --- a/include/configs/tcm-bf518.h +++ b/include/configs/tcm-bf518.h @@ -11,6 +11,7 @@ /* * Processor Settings */ +#define CONFIG_BFIN_CPU bf518-0.0 #define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_PARA diff --git a/include/configs/tcm-bf537.h b/include/configs/tcm-bf537.h index 9036ce3..8ded175 100644 --- a/include/configs/tcm-bf537.h +++ b/include/configs/tcm-bf537.h @@ -11,6 +11,7 @@ /* * Processor Settings */ +#define CONFIG_BFIN_CPU bf537-0.2 #define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS diff --git a/include/configs/tegra2-common.h b/include/configs/tegra2-common.h index 4f4374a..febce35 100644 --- a/include/configs/tegra2-common.h +++ b/include/configs/tegra2-common.h @@ -33,6 +33,8 @@ #define CONFIG_MACH_TEGRA_GENERIC /* which is a Tegra generic machine */ #define CONFIG_L2_OFF /* No L2 cache */ +#define CONFIG_ENABLE_CORTEXA9 /* enable CPU (A9 complex) */ + #include <asm/arch/tegra2.h> /* get chip and board defs */ /* @@ -45,6 +47,7 @@ #define CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_OF_LIBFDT /* enable passing of devicetree */ /* Environment */ #define CONFIG_ENV_IS_NOWHERE diff --git a/include/configs/tuda1.h b/include/configs/tuda1.h new file mode 100644 index 0000000..1c0b3e0 --- /dev/null +++ b/include/configs/tuda1.h @@ -0,0 +1,141 @@ +/* + * Copyright (C) 2006 Freescale Semiconductor, Inc. + * Dave Liu <daveliu@freescale.com> + * + * Copyright (C) 2007 Logic Product Development, Inc. + * Peter Barada <peterb@logicpd.com> + * + * Copyright (C) 2007 MontaVista Software, Inc. + * Anton Vorontsov <avorontsov@ru.mvista.com> + * + * (C) Copyright 2008 + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * (C) Copyright 2010-2011 + * Lukas Roggli, KEYMILE Ltd, lukas.roggli@keymile.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ +#define CONFIG_TUDA1 /* TUDA1 board specific */ +#define CONFIG_HOSTNAME tuda1 +#define CONFIG_KM_BOARD_NAME "tuda1" + +#define CONFIG_SYS_TEXT_BASE 0xF0000000 + +/* include common defines/options for all 8321 Keymile boards */ +#include "km8321-common.h" + +#define CONFIG_SYS_APP1_BASE 0xA0000000 /* PAXG */ +#define CONFIG_SYS_APP1_SIZE 256 /* Megabytes */ +#define CONFIG_SYS_APP2_BASE 0xB0000000 /* PINC3 */ +#define CONFIG_SYS_APP2_SIZE 256 /* Megabytes */ + +/* + * Local Bus Configuration & Clock Setup + */ +#define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_EADC_1 | LCRR_CLKDIV_2) +#define CONFIG_SYS_LBC_LBCR 0x00000000 + +/* + * Init Local Bus Memory Controller: + * + * Bank Bus Machine PortSz Size Device + * ---- --- ------- ------ ----- ------ + * 2 Local GPCM 8 bit 256MB PAXG + * 3 Local GPCM 8 bit 256MB PINC3 + * + */ + +/* + * PAXG on the local bus CS2 + */ +/* Window base at flash base */ +#define CONFIG_SYS_LBLAWBAR2_PRELIM CONFIG_SYS_APP1_BASE +/* Window size: 256 MB */ +#define CONFIG_SYS_LBLAWAR2_PRELIM (LBLAWAR_EN | LBLAWAR_256MB) + +#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_APP1_BASE | \ + BR_PS_8 | \ + BR_MS_GPCM | \ + BR_V) + +#define CONFIG_SYS_OR2_PRELIM (MEG_TO_AM(CONFIG_SYS_APP1_SIZE) | \ + OR_GPCM_CSNT | \ + OR_GPCM_ACS_DIV4 | \ + OR_GPCM_SCY_2 | \ + (OR_GPCM_TRLX & \ + (~OR_GPCM_EHTR)) | /* EHTR = 0 */ \ + OR_GPCM_EAD) +/* + * PINC3 on the local bus CS3 + */ +/* Access window base at PINC3 base */ +#define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_APP2_BASE +/* Window size: 256 MB */ +#define CONFIG_SYS_LBLAWAR3_PRELIM (LBLAWAR_EN | LBLAWAR_256MB) + +#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_APP2_BASE | \ + BR_PS_8 | \ + BR_MS_GPCM | \ + BR_V) + +#define CONFIG_SYS_OR3_PRELIM (MEG_TO_AM(CONFIG_SYS_APP2_SIZE) | \ + OR_GPCM_CSNT | \ + (OR_GPCM_ACS_DIV2 & /* ACS = 11 */\ + (~OR_GPCM_XACS)) | /* XACS = 0 */\ + (OR_GPCM_SCY_2 & \ + (~OR_GPCM_EHTR)) | /* EHTR = 0 */ \ + OR_GPCM_TRLX) + +#define CONFIG_SYS_MAMR (MxMR_GPL_x4DIS | \ + 0x0000c000 | \ + MxMR_WLFx_2X) + +/* + * MMU Setup + */ +/* PAXG: icache cacheable, but dcache-inhibit and guarded */ +#define CONFIG_SYS_IBAT5L (CONFIG_SYS_APP1_BASE | \ + BATL_PP_10 | \ + BATL_MEMCOHERENCE) +/* 512M should also include APP2... */ +#define CONFIG_SYS_IBAT5U (CONFIG_SYS_APP1_BASE | \ + BATU_BL_256M | \ + BATU_VS | \ + BATU_VP) +#define CONFIG_SYS_DBAT5L (CONFIG_SYS_APP1_BASE | \ + BATL_PP_10 | \ + BATL_CACHEINHIBIT | \ + BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U + +/* PINC3: icache cacheable, but dcache-inhibit and guarded */ +#define CONFIG_SYS_IBAT6L (CONFIG_SYS_APP2_BASE | \ + BATL_PP_10 | \ + BATL_MEMCOHERENCE) +#define CONFIG_SYS_IBAT6U (CONFIG_SYS_APP2_BASE | \ + BATU_BL_256M | \ + BATU_VS | \ + BATU_VP) +#define CONFIG_SYS_DBAT6L (CONFIG_SYS_APP2_BASE | \ + BATL_PP_10 | \ + BATL_CACHEINHIBIT | \ + BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U + +#define CONFIG_SYS_IBAT7L (0) +#define CONFIG_SYS_IBAT7U (0) +#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L +#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U + +#endif /* __CONFIG_H */ diff --git a/include/configs/tuxa1.h b/include/configs/tuxa1.h new file mode 100644 index 0000000..012db96 --- /dev/null +++ b/include/configs/tuxa1.h @@ -0,0 +1,124 @@ +/* + * Copyright (C) 2006 Freescale Semiconductor, Inc. + * Dave Liu <daveliu@freescale.com> + * + * Copyright (C) 2007 Logic Product Development, Inc. + * Peter Barada <peterb@logicpd.com> + * + * Copyright (C) 2007 MontaVista Software, Inc. + * Anton Vorontsov <avorontsov@ru.mvista.com> + * + * (C) Copyright 2008 + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * (C) Copyright 2010 + * Yan Bin, Lukas Roggli, KEYMILE Ltd, lukas.roggli@keymile.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ +#define CONFIG_TUXA1 /* TUXA1 board specific */ +#define CONFIG_HOSTNAME tuxa1 +#define CONFIG_KM_BOARD_NAME "tuxa1" + +#define CONFIG_SYS_TEXT_BASE 0xF0000000 + +/* include common defines/options for all 8321 Keymile boards */ +#include "km8321-common.h" + +#define CONFIG_SYS_LPXF_BASE 0xA0000000 /* LPXF */ +#define CONFIG_SYS_LPXF_SIZE 256 /* Megabytes */ +#define CONFIG_SYS_PINC2_BASE 0xB0000000 /* PINC2 */ +#define CONFIG_SYS_PINC2_SIZE 256 /* Megabytes */ + +/* + * Init Local Bus Memory Controller: + * + * Bank Bus Machine PortSz Size Device + * ---- --- ------- ------ ----- ------ + * 2 Local GPCM 8 bit 256MB LPXF + * 3 Local GPCM 8 bit 256MB PINC2 + * + */ + +/* + * LPXF on the local bus CS2 + * Window base at flash base + * Window size: 256 MB + */ +#define CONFIG_SYS_LBLAWBAR2_PRELIM CONFIG_SYS_LPXF_BASE +#define CONFIG_SYS_LBLAWAR2_PRELIM (LBLAWAR_EN | LBLAWAR_256MB) + +#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_LPXF_BASE | \ + BR_PS_8 | \ + BR_MS_GPCM | \ + BR_V) + +#define CONFIG_SYS_OR2_PRELIM (MEG_TO_AM(CONFIG_SYS_LPXF_SIZE) | \ + OR_GPCM_CSNT | \ + OR_GPCM_ACS_DIV4 | \ + OR_GPCM_SCY_2 | \ + (OR_GPCM_TRLX & \ + (~OR_GPCM_EHTR)) | /* EHTR = 0 */ \ + OR_GPCM_EAD) +/* + * PINC2 on the local bus CS3 + * Access window base at PINC2 base + * Window size: 256 MB + */ +#define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_PINC2_BASE +#define CONFIG_SYS_LBLAWAR3_PRELIM (LBLAWAR_EN | LBLAWAR_256MB) + +#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_PINC2_BASE | \ + BR_PS_8 | \ + BR_MS_GPCM | \ + BR_V) + +#define CONFIG_SYS_OR3_PRELIM (MEG_TO_AM(CONFIG_SYS_PINC2_SIZE) | \ + OR_GPCM_CSNT | \ + (OR_GPCM_ACS_DIV2 & /* ACS = 11 */ \ + (~OR_GPCM_XACS)) | /* XACS = 0 */ \ + (OR_GPCM_SCY_2 & \ + (~OR_GPCM_EHTR)) | /* EHTR = 0 */ \ + OR_GPCM_TRLX) + +#define CONFIG_SYS_MAMR (MxMR_GPL_x4DIS | \ + 0x0000c000 | \ + MxMR_WLFx_2X) + +/* + * MMU Setup + */ +/* LPXF: icache cacheable, but dcache-inhibit and guarded */ +#define CONFIG_SYS_IBAT5L (CONFIG_SYS_LPXF_BASE | BATL_PP_10 | \ + BATL_MEMCOHERENCE) +#define CONFIG_SYS_IBAT5U (CONFIG_SYS_LPXF_BASE | BATU_BL_256M | \ + BATU_VS | BATU_VP) +#define CONFIG_SYS_DBAT5L (CONFIG_SYS_LPXF_BASE | BATL_PP_10 | \ + BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U + +/* PINC2: icache cacheable, but dcache-inhibit and guarded */ +#define CONFIG_SYS_IBAT6L (CONFIG_SYS_PINC2_BASE | BATL_PP_10 | \ + BATL_MEMCOHERENCE) +#define CONFIG_SYS_IBAT6U (CONFIG_SYS_PINC2_BASE | BATU_BL_256M | \ + BATU_VS | BATU_VP) +#define CONFIG_SYS_DBAT6L (CONFIG_SYS_PINC2_BASE | BATL_PP_10 | \ + BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U + +#define CONFIG_SYS_IBAT7L (0) +#define CONFIG_SYS_IBAT7U (0) +#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L +#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U + +#endif /* __CONFIG_H */ diff --git a/include/configs/xm250.h b/include/configs/xm250.h index 497cb91..232baf3 100644 --- a/include/configs/xm250.h +++ b/include/configs/xm250.h @@ -61,6 +61,8 @@ /* * I2C bus */ +#define CONFIG_I2C_MV 1 +#define CONFIG_MV_I2C_REG 0x40301680 #define CONFIG_HARD_I2C 1 #define CONFIG_SYS_I2C_SPEED 50000 #define CONFIG_SYS_I2C_SLAVE 0xfe diff --git a/include/configs/xpedite550x.h b/include/configs/xpedite550x.h index a051913..17aab5a 100644 --- a/include/configs/xpedite550x.h +++ b/include/configs/xpedite550x.h @@ -67,7 +67,7 @@ #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ #define CONFIG_DDR_SPD #define CONFIG_MEM_INIT_VALUE 0xdeadbeef -#define SPD_EEPROM_ADDRESS1 0x54 +#define SPD_EEPROM_ADDRESS 0x54 #define SPD_EEPROM_OFFSET 0x200 /* OFFSET of SPD in EEPROM */ #define CONFIG_NUM_DDR_CONTROLLERS 1 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 diff --git a/include/ddr_spd.h b/include/ddr_spd.h index 710e528..e895d61 100644 --- a/include/ddr_spd.h +++ b/include/ddr_spd.h @@ -304,14 +304,24 @@ extern unsigned int ddr3_spd_check(const ddr3_spd_eeprom_t *spd); #define SPD_MEMTYPE_DDR2_FBDIMM_PROBE (0x0A) #define SPD_MEMTYPE_DDR3 (0x0B) -/* - * Byte 3 Key Byte / Module Type for DDR3 SPD - */ -#define SPD_MODULETYPE_RDIMM (0x01) -#define SPD_MODULETYPE_UDIMM (0x02) -#define SPD_MODULETYPE_SODIMM (0x03) -#define SPD_MODULETYPE_MICRODIMM (0x04) -#define SPD_MODULETYPE_MINIRDIMM (0x05) -#define SPD_MODULETYPE_MINIUDIMM (0x06) +/* DIMM Type for DDR2 SPD (according to v1.3) */ +#define DDR2_SPD_DIMMTYPE_UNDEFINED (0x00) +#define DDR2_SPD_DIMMTYPE_RDIMM (0x01) +#define DDR2_SPD_DIMMTYPE_UDIMM (0x02) +#define DDR2_SPD_DIMMTYPE_SO_DIMM (0x04) +#define DDR2_SPD_DIMMTYPE_72B_SO_CDIMM (0x06) +#define DDR2_SPD_DIMMTYPE_72B_SO_RDIMM (0x07) +#define DDR2_SPD_DIMMTYPE_MICRO_DIMM (0x08) +#define DDR2_SPD_DIMMTYPE_MINI_RDIMM (0x10) +#define DDR2_SPD_DIMMTYPE_MINI_UDIMM (0x20) + +/* Byte 3 Key Byte / Module Type for DDR3 SPD */ +#define DDR3_SPD_MODULETYPE_MASK (0x0f) +#define DDR3_SPD_MODULETYPE_RDIMM (0x01) +#define DDR3_SPD_MODULETYPE_UDIMM (0x02) +#define DDR3_SPD_MODULETYPE_SO_DIMM (0x03) +#define DDR3_SPD_MODULETYPE_MICRO_DIMM (0x04) +#define DDR3_SPD_MODULETYPE_MINI_RDIMM (0x05) +#define DDR3_SPD_MODULETYPE_MINI_UDIMM (0x06) #endif /* _DDR_SPD_H_ */ diff --git a/include/exports.h b/include/exports.h index 6382311..ddd1bf4 100644 --- a/include/exports.h +++ b/include/exports.h @@ -45,7 +45,7 @@ enum { #define XF_VERSION 6 -#if defined(CONFIG_I386) +#if defined(CONFIG_X86) extern gd_t *global_data; #endif diff --git a/drivers/power/ftpmu010.h b/include/faraday/ftpmu010.h index 8ef7a37..77c29a9 100644 --- a/drivers/power/ftpmu010.h +++ b/include/faraday/ftpmu010.h @@ -23,6 +23,7 @@ #ifndef __FTPMU010_H #define __FTPMU010_H +#ifndef __ASSEMBLY__ struct ftpmu010 { unsigned int IDNMBR0; /* 0x00 */ unsigned int reserved0; /* 0x04 */ @@ -80,6 +81,7 @@ struct ftpmu010 { unsigned int ED0_RACC; /* 0xD4 */ unsigned int ED1_RACC; /* 0xD8 */ }; +#endif /* __ASSEMBLY__ */ /* * ID Number 0 Register @@ -126,21 +128,117 @@ struct ftpmu010 { /* * Multi-Function Port Setting Register */ +#define FTPMU010_MFPSR_DEBUGSEL (1 << 17) +#define FTPMU010_MFPSR_DMA0PINSEL (1 << 16) +#define FTPMU010_MFPSR_DMA1PINSEL (1 << 15) #define FTPMU010_MFPSR_MODEMPINSEL (1 << 14) #define FTPMU010_MFPSR_AC97CLKOUTSEL (1 << 13) +#define FTPMU010_MFPSR_PWM1PINSEL (1 << 11) +#define FTPMU010_MFPSR_PWM0PINSEL (1 << 10) +#define FTPMU010_MFPSR_IRDACLKSEL (1 << 9) +#define FTPMU010_MFPSR_UARTCLKSEL (1 << 8) +#define FTPMU010_MFPSR_SSPCLKSEL (1 << 6) +#define FTPMU010_MFPSR_I2SCLKSEL (1 << 5) +#define FTPMU010_MFPSR_AC97CLKSEL (1 << 4) #define FTPMU010_MFPSR_AC97PINSEL (1 << 3) +#define FTPMU010_MFPSR_TRIAHBDIS (1 << 1) +#define FTPMU010_MFPSR_TRIAHBDBG (1 << 0) /* * PLL/DLL Control Register 0 + * Note: + * 1. FTPMU010_PDLLCR0_HCLKOUTDIS: + * Datasheet indicated it starts at bit #21 which was wrong. + * 2. FTPMU010_PDLLCR0_DLLFRAG: + * Datasheet indicated it has 2 bit which was wrong. */ -#define FTPMU010_PDLLCR0_HCLKOUTDIS(cr0) (((cr0) >> 20) & 0xf) -#define FTPMU010_PDLLCR0_DLLFRAG (1 << 19) +#define FTPMU010_PDLLCR0_HCLKOUTDIS(cr0) (((cr0) & 0xf) << 20) +#define FTPMU010_PDLLCR0_DLLFRAG(cr0) (1 << 19) #define FTPMU010_PDLLCR0_DLLSTSEL (1 << 18) #define FTPMU010_PDLLCR0_DLLSTABLE (1 << 17) #define FTPMU010_PDLLCR0_DLLDIS (1 << 16) -#define FTPMU010_PDLLCR0_PLL1NS(cr0) (((cr0) >> 3) & 0x1ff) +#define FTPMU010_PDLLCR0_PLL1FRANG(cr0) (((cr0) & 0x3) << 12) +#define FTPMU010_PDLLCR0_PLL1NS(cr0) (((cr0) & 0x1ff) << 3) #define FTPMU010_PDLLCR0_PLL1STSEL (1 << 2) #define FTPMU010_PDLLCR0_PLL1STABLE (1 << 1) #define FTPMU010_PDLLCR0_PLL1DIS (1 << 0) +/* + * SDRAM Signal Hold Time Control Register + */ +#define FTPMU010_SDRAMHTC_RCLK_DLY(x) (((x) & 0xf) << 28) +#define FTPMU010_SDRAMHTC_CTL_WCLK_DLY(x) (((x) & 0xf) << 24) +#define FTPMU010_SDRAMHTC_DAT_WCLK_DLY(x) (((x) & 0xf) << 20) +#define FTPMU010_SDRAMHTC_EBICTRL_DCSR (1 << 18) +#define FTPMU010_SDRAMHTC_EBIDATA_DCSR (1 << 17) +#define FTPMU010_SDRAMHTC_SDRAMCS_DCSR (1 << 16) +#define FTPMU010_SDRAMHTC_SDRAMCTL_DCSR (1 << 15) +#define FTPMU010_SDRAMHTC_CKE_DCSR (1 << 14) +#define FTPMU010_SDRAMHTC_DQM_DCSR (1 << 13) +#define FTPMU010_SDRAMHTC_SDCLK_DCSR (1 << 12) + +#ifndef __ASSEMBLY__ +void ftpmu010_32768osc_enable(void); +void ftpmu010_dlldis_disable(void); +void ftpmu010_sdram_clk_disable(unsigned int cr0); +#endif + +#ifdef __ASSEMBLY__ +#define FTPMU010_IDNMBR0 0x00 +#define FTPMU010_reserved0 0x04 +#define FTPMU010_OSCC 0x08 +#define FTPMU010_PMODE 0x0C +#define FTPMU010_PMCR 0x10 +#define FTPMU010_PED 0x14 +#define FTPMU010_PEDSR 0x18 +#define FTPMU010_reserved1 0x1C +#define FTPMU010_PMSR 0x20 +#define FTPMU010_PGSR 0x24 +#define FTPMU010_MFPSR 0x28 +#define FTPMU010_MISC 0x2C +#define FTPMU010_PDLLCR0 0x30 +#define FTPMU010_PDLLCR1 0x34 +#define FTPMU010_AHBMCLKOFF 0x38 +#define FTPMU010_APBMCLKOFF 0x3C +#define FTPMU010_DCSRCR0 0x40 +#define FTPMU010_DCSRCR1 0x44 +#define FTPMU010_DCSRCR2 0x48 +#define FTPMU010_SDRAMHTC 0x4C +#define FTPMU010_PSPR0 0x50 +#define FTPMU010_PSPR1 0x54 +#define FTPMU010_PSPR2 0x58 +#define FTPMU010_PSPR3 0x5C +#define FTPMU010_PSPR4 0x60 +#define FTPMU010_PSPR5 0x64 +#define FTPMU010_PSPR6 0x68 +#define FTPMU010_PSPR7 0x6C +#define FTPMU010_PSPR8 0x70 +#define FTPMU010_PSPR9 0x74 +#define FTPMU010_PSPR10 0x78 +#define FTPMU010_PSPR11 0x7C +#define FTPMU010_PSPR12 0x80 +#define FTPMU010_PSPR13 0x84 +#define FTPMU010_PSPR14 0x88 +#define FTPMU010_PSPR15 0x8C +#define FTPMU010_AHBDMA_RACCS 0x90 +#define FTPMU010_reserved2 0x94 +#define FTPMU010_reserved3 0x98 +#define FTPMU010_JSS 0x9C +#define FTPMU010_CFC_RACC 0xA0 +#define FTPMU010_SSP1_RACC 0xA4 +#define FTPMU010_UART1TX_RACC 0xA8 +#define FTPMU010_UART1RX_RACC 0xAC +#define FTPMU010_UART2TX_RACC 0xB0 +#define FTPMU010_UART2RX_RACC 0xB4 +#define FTPMU010_SDC_RACC 0xB8 +#define FTPMU010_I2SAC97_RACC 0xBC +#define FTPMU010_IRDATX_RACC 0xC0 +#define FTPMU010_reserved4 0xC4 +#define FTPMU010_USBD_RACC 0xC8 +#define FTPMU010_IRDARX_RACC 0xCC +#define FTPMU010_IRDA_RACC 0xD0 +#define FTPMU010_ED0_RACC 0xD4 +#define FTPMU010_ED1_RACC 0xD8 +#endif /* __ASSEMBLY__ */ + #endif /* __FTPMU010_H */ diff --git a/arch/arm/include/asm/arch-a320/ftsdmc020.h b/include/faraday/ftsdmc020.h index 0699772..0699772 100644 --- a/arch/arm/include/asm/arch-a320/ftsdmc020.h +++ b/include/faraday/ftsdmc020.h diff --git a/arch/arm/include/asm/arch-a320/ftsmc020.h b/include/faraday/ftsmc020.h index 95d9500..95d9500 100644 --- a/arch/arm/include/asm/arch-a320/ftsmc020.h +++ b/include/faraday/ftsmc020.h diff --git a/arch/arm/include/asm/arch-a320/fttmr010.h b/include/faraday/fttmr010.h index 72abcb3..72abcb3 100644 --- a/arch/arm/include/asm/arch-a320/fttmr010.h +++ b/include/faraday/fttmr010.h diff --git a/include/faraday/ftwdt010_wdt.h b/include/faraday/ftwdt010_wdt.h new file mode 100644 index 0000000..31ca768 --- /dev/null +++ b/include/faraday/ftwdt010_wdt.h @@ -0,0 +1,106 @@ +/* + * Watchdog driver for the FTWDT010 Watch Dog Driver + * + * (c) Copyright 2004 Faraday Technology Corp. (www.faraday-tech.com) + * Based on sa1100_wdt.c by Oleg Drokin <green@crimea.edu> + * Based on SoftDog driver by Alan Cox <alan@redhat.com> + * + * Copyright (C) 2011 Andes Technology Corporation + * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * 27/11/2004 Initial release, Faraday. + * 12/01/2011 Port to u-boot, Macpaul Lin. + */ + +#ifndef __FTWDT010_H +#define __FTWDT010_H + +struct ftwdt010_wdt { + unsigned int wdcounter; /* Counter Reg - 0x00 */ + unsigned int wdload; /* Counter Auto Reload Reg - 0x04 */ + unsigned int wdrestart; /* Counter Restart Reg - 0x08 */ + unsigned int wdcr; /* Control Reg - 0x0c */ + unsigned int wdstatus; /* Status Reg - 0x10 */ + unsigned int wdclear; /* Timer Clear - 0x14 */ + unsigned int wdintrlen; /* Interrupt Length - 0x18 */ +}; + +/* + * WDLOAD - Counter Auto Reload Register + * The Auto Reload Register is set to 0x03EF1480 (66Mhz) by default. + * Which means in a 66MHz system, the period of Watch Dog timer reset is + * one second. + */ +#define FTWDT010_WDLOAD(x) ((x) & 0xffffffff) + +/* + * WDRESTART - Watch Dog Timer Counter Restart Register + * If writing 0x5AB9 to WDRESTART register, Watch Dog timer will + * automatically reload WDLOAD to WDCOUNTER and restart counting. + */ +#define FTWDT010_WDRESTART_MAGIC 0x5AB9 + +/* WDCR - Watch Dog Timer Control Register */ +#define FTWDT010_WDCR_ENABLE (1 << 0) +#define FTWDT010_WDCR_RST (1 << 1) +#define FTWDT010_WDCR_INTR (1 << 2) +/* FTWDT010_WDCR_EXT bit: Watch Dog Timer External Signal Enable */ +#define FTWDT010_WDCR_EXT (1 << 3) +/* FTWDT010_WDCR_CLOCK bit: Clock Source: 0: PCLK, 1: EXTCLK. + * The clock source PCLK cannot be gated when system sleeps, even if + * WDCLOCK bit is turned on. + * + * Faraday's Watch Dog timer can be driven by an external clock. The + * programmer just needs to write one to WdCR[WdClock] bit. + * + * Note: There is a limitation between EXTCLK and PCLK: + * EXTCLK cycle time / PCLK cycle time > 2. + * If the system does not need an external clock, + * just keep WdCR[WdClock] bit in its default value. + */ +#define FTWDT010_WDCR_CLOCK (1 << 4) + +/* + * WDSTATUS - Watch Dog Timer Status Register + * This bit is set when the counter reaches Zero + */ +#define FTWDT010_WDSTATUS(x) ((x) & 0x1) + +/* + * WDCLEAR - Watch Dog Timer Clear Register + * Writing one to this register will clear WDSTATUS. + */ +#define FTWDT010_WDCLEAR (1 << 0) + +/* + * WDINTRLEN - Watch Dog Timer Interrupt Length + * This register controls the duration length of wd_rst, wd_intr and wd_ext. + * The default value is 0xFF. + */ +#define FTWDT010_WDINTRLEN(x) ((x) & 0xff) + +/* + * Variable timeout should be set in ms. + * (CONFIG_SYS_CLK_FREQ/1000) equals 1 ms. + * WDLOAD = timeout * TIMEOUT_FACTOR. + */ +#define FTWDT010_TIMEOUT_FACTOR (CONFIG_SYS_CLK_FREQ / 1000) /* 1 ms */ + +void ftwdt010_wdt_reset(void); +void ftwdt010_wdt_disable(void); + +#endif /* __FTWDT010_H */ diff --git a/include/flash.h b/include/flash.h index 1b6821a..0ca70d9 100644 --- a/include/flash.h +++ b/include/flash.h @@ -92,6 +92,7 @@ typedef unsigned long flash_sect_t; /* Prototypes */ extern unsigned long flash_init (void); +extern void flash_protect_default(void); extern void flash_print_info (flash_info_t *); extern int flash_erase (flash_info_t *, int, int); extern int flash_sect_erase (ulong addr_first, ulong addr_last); diff --git a/include/fsl_diu_fb.h b/include/fsl_diu_fb.h index 87443e1..4c89f4b 100644 --- a/include/fsl_diu_fb.h +++ b/include/fsl_diu_fb.h @@ -1,6 +1,7 @@ /* - * Copyright 2007 Freescale Semiconductor, Inc. - * York Sun <yorksun@freescale.com> + * Copyright 2007, 2011 Freescale Semiconductor, Inc. + * Authors: York Sun <yorksun@freescale.com> + * Timur Tabi <timur@freescale.com> * * FSL DIU Framebuffer driver * @@ -23,38 +24,8 @@ * MA 02111-1307 USA */ -struct fb_var_screeninfo { - unsigned int xres; /* visible resolution */ - unsigned int yres; +int fsl_diu_init(int xres, u32 pixel_format, int gamma_fix); - unsigned int bits_per_pixel; /* guess what */ - - /* Timing: All values in pixclocks, except pixclock (of course) */ - unsigned int pixclock; /* pixel clock in ps (pico seconds) */ - unsigned int left_margin; /* time from sync to picture */ - unsigned int right_margin; /* time from picture to sync */ - unsigned int upper_margin; /* time from sync to picture */ - unsigned int lower_margin; - unsigned int hsync_len; /* length of horizontal sync */ - unsigned int vsync_len; /* length of vertical sync */ - unsigned int sync; /* see FB_SYNC_* */ - unsigned int vmode; /* see FB_VMODE_* */ - unsigned int rotate; /* angle we rotate counter clockwise */ -}; - -struct fb_info { - struct fb_var_screeninfo var; /* Current var */ - unsigned long smem_start; /* Start of frame buffer mem */ - /* (physical address) */ - unsigned int smem_len; /* Length of frame buffer mem */ - unsigned int type; /* see FB_TYPE_* */ - unsigned int line_length; /* length of a line in bytes */ - - char *screen_base; - unsigned long screen_size; -}; - - -extern char *fsl_fb_open(struct fb_info **info); -int fsl_diu_init(int xres, unsigned int pixel_format, int gamma_fix); -int platform_diu_init(unsigned int *xres, unsigned int *yres); +/* Prototypes for external board-specific functions */ +int platform_diu_init(unsigned int xres, unsigned int yres, const char *port); +void diu_set_pixel_clock(unsigned int pixclock); diff --git a/include/fsl_esdhc.h b/include/fsl_esdhc.h index 477bbd7..8418bf7 100644 --- a/include/fsl_esdhc.h +++ b/include/fsl_esdhc.h @@ -2,7 +2,7 @@ * FSL SD/MMC Defines *------------------------------------------------------------------- * - * Copyright 2007-2008,2010 Freescale Semiconductor, Inc + * Copyright 2007-2008,2010-2011 Freescale Semiconductor, Inc * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as @@ -135,8 +135,21 @@ #define WML 0x2e044 #define WML_WRITE 0x00010000 +#ifdef CONFIG_FSL_SDHC_V2_3 +#define WML_RD_WML_MAX 0x80 +#define WML_WR_WML_MAX 0x80 +#define WML_RD_WML_MAX_VAL 0x0 +#define WML_WR_WML_MAX_VAL 0x0 +#define WML_RD_WML_MASK 0x7f +#define WML_WR_WML_MASK 0x7f0000 +#else +#define WML_RD_WML_MAX 0x10 +#define WML_WR_WML_MAX 0x80 +#define WML_RD_WML_MAX_VAL 0x10 +#define WML_WR_WML_MAX_VAL 0x80 #define WML_RD_WML_MASK 0xff #define WML_WR_WML_MASK 0xff0000 +#endif #define BLKATTR 0x2e004 #define BLKATTR_CNT(x) ((x & 0xffff) << 16) diff --git a/include/fsl_mdio.h b/include/fsl_mdio.h new file mode 100644 index 0000000..17ca79c --- /dev/null +++ b/include/fsl_mdio.h @@ -0,0 +1,62 @@ +/* + * Copyright 2009-2010 Freescale Semiconductor, Inc. + * Jun-jie Zhang <b18070@freescale.com> + * Mingkai Hu <Mingkai.hu@freescale.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __FSL_PHY_H__ +#define __FSL_PHY_H__ + +#include <net.h> +#include <miiphy.h> +#include <asm/fsl_enet.h> + +/* PHY register offsets */ +#define PHY_EXT_PAGE_ACCESS 0x1f + +/* MII Management Configuration Register */ +#define MIIMCFG_RESET_MGMT 0x80000000 +#define MIIMCFG_MGMT_CLOCK_SELECT 0x00000007 +#define MIIMCFG_INIT_VALUE 0x00000003 + +/* MII Management Command Register */ +#define MIIMCOM_READ_CYCLE 0x00000001 +#define MIIMCOM_SCAN_CYCLE 0x00000002 + +/* MII Management Address Register */ +#define MIIMADD_PHY_ADDR_SHIFT 8 + +/* MII Management Indicator Register */ +#define MIIMIND_BUSY 0x00000001 +#define MIIMIND_NOTVALID 0x00000004 + +void tsec_local_mdio_write(struct tsec_mii_mng *phyregs, int port_addr, + int dev_addr, int reg, int value); +int tsec_local_mdio_read(struct tsec_mii_mng *phyregs, int port_addr, + int dev_addr, int regnum); +int tsec_phy_read(struct mii_dev *bus, int addr, int dev_addr, int regnum); +int tsec_phy_write(struct mii_dev *bus, int addr, int dev_addr, int regnum, + u16 value); + +struct fsl_pq_mdio_info { + struct tsec_mii_mng *regs; + char *name; +}; +int fsl_pq_mdio_init(bd_t *bis, struct fsl_pq_mdio_info *info); + +#endif /* __FSL_PHY_H__ */ + diff --git a/include/gdsys_fpga.h b/include/gdsys_fpga.h index 1fccd27..c0b1b5c 100644 --- a/include/gdsys_fpga.h +++ b/include/gdsys_fpga.h @@ -50,6 +50,9 @@ typedef struct ihs_osd { u16 features; u16 control; u16 xy_size; + u16 xy_scale; + u16 x_pos; + u16 y_pos; } ihs_osd_t; #ifdef CONFIG_IO @@ -79,7 +82,7 @@ typedef struct ihs_fpga { u16 reserved_2[93]; /* 0x0044 */ u16 reflection_high; /* 0x00fe */ ihs_osd_t osd; /* 0x0100 */ - u16 reserved_3[892]; /* 0x0108 */ + u16 reserved_3[88]; /* 0x010e */ u16 videomem; /* 0x0800 */ } ihs_fpga_t; #endif @@ -94,13 +97,13 @@ typedef struct ihs_fpga { u16 extended_interrupt; /* 0x001c */ u16 reserved_1[9]; /* 0x001e */ ihs_i2c_t i2c; /* 0x0030 */ - u16 reserved_2[35]; /* 0x0038 */ - u16 reflection_high; /* 0x007e */ - u16 reserved_3[15]; /* 0x0080 */ + u16 reserved_2[16]; /* 0x0038 */ + u16 mpc3w_control; /* 0x0058 */ + u16 reserved_3[34]; /* 0x005a */ u16 videocontrol; /* 0x009e */ u16 reserved_4[176]; /* 0x00a0 */ ihs_osd_t osd; /* 0x0200 */ - u16 reserved_5[764]; /* 0x0208 */ + u16 reserved_5[761]; /* 0x020e */ u16 videomem; /* 0x0800 */ } ihs_fpga_t; #endif diff --git a/include/i2c.h b/include/i2c.h index cd23c8a..8ceb4c8 100644 --- a/include/i2c.h +++ b/include/i2c.h @@ -108,9 +108,7 @@ * repeatedly to change the speed and slave addresses. */ void i2c_init(int speed, int slaveaddr); -#ifdef CONFIG_SYS_I2C_INIT_BOARD void i2c_init_board(void); -#endif #ifdef CONFIG_SYS_I2C_BOARD_LATE_INIT void i2c_board_late_init(void); #endif diff --git a/include/ide.h b/include/ide.h index 6a1b7ae..8ecc9dd 100644 --- a/include/ide.h +++ b/include/ide.h @@ -52,9 +52,16 @@ typedef ulong lbaint_t; void ide_init(void); ulong ide_read(int device, lbaint_t blknr, ulong blkcnt, void *buffer); -ulong ide_write(int device, lbaint_t blknr, ulong blkcnt, void *buffer); +ulong ide_write(int device, lbaint_t blknr, ulong blkcnt, const void *buffer); #if defined(CONFIG_OF_IDE_FIXUP) int ide_device_present(int dev); #endif + +#if defined(CONFIG_IDE_AHB) +unsigned char ide_read_register(int dev, unsigned int port); +void ide_write_register(int dev, unsigned int port, unsigned char val); +void ide_read_data(int dev, ulong *sect_buf, int words); +void ide_write_data(int dev, ulong *sect_buf, int words); +#endif #endif /* _IDE_H */ diff --git a/include/image.h b/include/image.h index 005e0d2..c31e862 100644 --- a/include/image.h +++ b/include/image.h @@ -336,8 +336,8 @@ int boot_get_ramdisk (int argc, char * const argv[], bootm_headers_t *images, #ifdef CONFIG_OF_LIBFDT int boot_get_fdt (int flag, int argc, char * const argv[], bootm_headers_t *images, char **of_flat_tree, ulong *of_size); -int boot_relocate_fdt (struct lmb *lmb, ulong bootmap_base, - char **of_flat_tree, ulong *of_size); +void boot_fdt_add_mem_rsv_regions(struct lmb *lmb, void *fdt_blob); +int boot_relocate_fdt (struct lmb *lmb, char **of_flat_tree, ulong *of_size); #endif #ifdef CONFIG_SYS_BOOT_RAMDISK_HIGH @@ -345,11 +345,10 @@ int boot_ramdisk_high (struct lmb *lmb, ulong rd_data, ulong rd_len, ulong *initrd_start, ulong *initrd_end); #endif /* CONFIG_SYS_BOOT_RAMDISK_HIGH */ #ifdef CONFIG_SYS_BOOT_GET_CMDLINE -int boot_get_cmdline (struct lmb *lmb, ulong *cmd_start, ulong *cmd_end, - ulong bootmap_base); +int boot_get_cmdline (struct lmb *lmb, ulong *cmd_start, ulong *cmd_end); #endif /* CONFIG_SYS_BOOT_GET_CMDLINE */ #ifdef CONFIG_SYS_BOOT_GET_KBD -int boot_get_kbd (struct lmb *lmb, bd_t **kbd, ulong bootmap_base); +int boot_get_kbd (struct lmb *lmb, bd_t **kbd); #endif /* CONFIG_SYS_BOOT_GET_KBD */ #endif /* !USE_HOSTCC */ @@ -453,6 +452,7 @@ int image_check_dcrc (const image_header_t *hdr); int getenv_yesno (char *var); ulong getenv_bootm_low(void); phys_size_t getenv_bootm_size(void); +phys_size_t getenv_bootm_mapsize(void); void memmove_wd (void *to, void *from, size_t len, ulong chunksz); #endif diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h new file mode 100644 index 0000000..fcb20fe --- /dev/null +++ b/include/linux/ethtool.h @@ -0,0 +1,721 @@ +/* + * ethtool.h: Defines for Linux ethtool. + * + * Copyright (C) 1998 David S. Miller (davem@redhat.com) + * Copyright 2001 Jeff Garzik <jgarzik@pobox.com> + * Portions Copyright 2001 Sun Microsystems (thockin@sun.com) + * Portions Copyright 2002 Intel (eli.kupermann@intel.com, + * christopher.leech@intel.com, + * scott.feldman@intel.com) + * Portions Copyright (C) Sun Microsystems 2008 + */ + +#ifndef _LINUX_ETHTOOL_H +#define _LINUX_ETHTOOL_H + +#include <linux/types.h> + +/* This should work for both 32 and 64 bit userland. */ +struct ethtool_cmd { + __u32 cmd; + __u32 supported; /* Features this interface supports */ + __u32 advertising; /* Features this interface advertises */ + __u16 speed; /* The forced speed, 10Mb, 100Mb, gigabit */ + __u8 duplex; /* Duplex, half or full */ + __u8 port; /* Which connector port */ + __u8 phy_address; + __u8 transceiver; /* Which transceiver to use */ + __u8 autoneg; /* Enable or disable autonegotiation */ + __u8 mdio_support; + __u32 maxtxpkt; /* Tx pkts before generating tx int */ + __u32 maxrxpkt; /* Rx pkts before generating rx int */ + __u16 speed_hi; + __u8 eth_tp_mdix; + __u8 reserved2; + __u32 lp_advertising; /* Features the link partner advertises */ + __u32 reserved[2]; +}; + +static inline void ethtool_cmd_speed_set(struct ethtool_cmd *ep, + __u32 speed) +{ + + ep->speed = (__u16)speed; + ep->speed_hi = (__u16)(speed >> 16); +} + +static inline __u32 ethtool_cmd_speed(struct ethtool_cmd *ep) +{ + return (ep->speed_hi << 16) | ep->speed; +} + +#define ETHTOOL_FWVERS_LEN 32 +#define ETHTOOL_BUSINFO_LEN 32 +/* these strings are set to whatever the driver author decides... */ +struct ethtool_drvinfo { + __u32 cmd; + char driver[32]; /* driver short name, "tulip", "eepro100" */ + char version[32]; /* driver version string */ + char fw_version[ETHTOOL_FWVERS_LEN]; /* firmware version string */ + char bus_info[ETHTOOL_BUSINFO_LEN]; /* Bus info for this IF. */ + /* For PCI devices, use pci_name(pci_dev). */ + char reserved1[32]; + char reserved2[12]; + /* + * Some struct members below are filled in + * using ops->get_sset_count(). Obtaining + * this info from ethtool_drvinfo is now + * deprecated; Use ETHTOOL_GSSET_INFO + * instead. + */ + __u32 n_priv_flags; /* number of flags valid in ETHTOOL_GPFLAGS */ + __u32 n_stats; /* number of u64's from ETHTOOL_GSTATS */ + __u32 testinfo_len; + __u32 eedump_len; /* Size of data from ETHTOOL_GEEPROM (bytes) */ + __u32 regdump_len; /* Size of data from ETHTOOL_GREGS (bytes) */ +}; + +#define SOPASS_MAX 6 +/* wake-on-lan settings */ +struct ethtool_wolinfo { + __u32 cmd; + __u32 supported; + __u32 wolopts; + __u8 sopass[SOPASS_MAX]; /* SecureOn(tm) password */ +}; + +/* for passing single values */ +struct ethtool_value { + __u32 cmd; + __u32 data; +}; + +/* for passing big chunks of data */ +struct ethtool_regs { + __u32 cmd; + __u32 version; /* driver-specific, indicates different chips/revs */ + __u32 len; /* bytes */ + __u8 data[0]; +}; + +/* for passing EEPROM chunks */ +struct ethtool_eeprom { + __u32 cmd; + __u32 magic; + __u32 offset; /* in bytes */ + __u32 len; /* in bytes */ + __u8 data[0]; +}; + +/* for configuring coalescing parameters of chip */ +struct ethtool_coalesce { + __u32 cmd; /* ETHTOOL_{G,S}COALESCE */ + + /* How many usecs to delay an RX interrupt after + * a packet arrives. If 0, only rx_max_coalesced_frames + * is used. + */ + __u32 rx_coalesce_usecs; + + /* How many packets to delay an RX interrupt after + * a packet arrives. If 0, only rx_coalesce_usecs is + * used. It is illegal to set both usecs and max frames + * to zero as this would cause RX interrupts to never be + * generated. + */ + __u32 rx_max_coalesced_frames; + + /* Same as above two parameters, except that these values + * apply while an IRQ is being serviced by the host. Not + * all cards support this feature and the values are ignored + * in that case. + */ + __u32 rx_coalesce_usecs_irq; + __u32 rx_max_coalesced_frames_irq; + + /* How many usecs to delay a TX interrupt after + * a packet is sent. If 0, only tx_max_coalesced_frames + * is used. + */ + __u32 tx_coalesce_usecs; + + /* How many packets to delay a TX interrupt after + * a packet is sent. If 0, only tx_coalesce_usecs is + * used. It is illegal to set both usecs and max frames + * to zero as this would cause TX interrupts to never be + * generated. + */ + __u32 tx_max_coalesced_frames; + + /* Same as above two parameters, except that these values + * apply while an IRQ is being serviced by the host. Not + * all cards support this feature and the values are ignored + * in that case. + */ + __u32 tx_coalesce_usecs_irq; + __u32 tx_max_coalesced_frames_irq; + + /* How many usecs to delay in-memory statistics + * block updates. Some drivers do not have an in-memory + * statistic block, and in such cases this value is ignored. + * This value must not be zero. + */ + __u32 stats_block_coalesce_usecs; + + /* Adaptive RX/TX coalescing is an algorithm implemented by + * some drivers to improve latency under low packet rates and + * improve throughput under high packet rates. Some drivers + * only implement one of RX or TX adaptive coalescing. Anything + * not implemented by the driver causes these values to be + * silently ignored. + */ + __u32 use_adaptive_rx_coalesce; + __u32 use_adaptive_tx_coalesce; + + /* When the packet rate (measured in packets per second) + * is below pkt_rate_low, the {rx,tx}_*_low parameters are + * used. + */ + __u32 pkt_rate_low; + __u32 rx_coalesce_usecs_low; + __u32 rx_max_coalesced_frames_low; + __u32 tx_coalesce_usecs_low; + __u32 tx_max_coalesced_frames_low; + + /* When the packet rate is below pkt_rate_high but above + * pkt_rate_low (both measured in packets per second) the + * normal {rx,tx}_* coalescing parameters are used. + */ + + /* When the packet rate is (measured in packets per second) + * is above pkt_rate_high, the {rx,tx}_*_high parameters are + * used. + */ + __u32 pkt_rate_high; + __u32 rx_coalesce_usecs_high; + __u32 rx_max_coalesced_frames_high; + __u32 tx_coalesce_usecs_high; + __u32 tx_max_coalesced_frames_high; + + /* How often to do adaptive coalescing packet rate sampling, + * measured in seconds. Must not be zero. + */ + __u32 rate_sample_interval; +}; + +/* for configuring RX/TX ring parameters */ +struct ethtool_ringparam { + __u32 cmd; /* ETHTOOL_{G,S}RINGPARAM */ + + /* Read only attributes. These indicate the maximum number + * of pending RX/TX ring entries the driver will allow the + * user to set. + */ + __u32 rx_max_pending; + __u32 rx_mini_max_pending; + __u32 rx_jumbo_max_pending; + __u32 tx_max_pending; + + /* Values changeable by the user. The valid values are + * in the range 1 to the "*_max_pending" counterpart above. + */ + __u32 rx_pending; + __u32 rx_mini_pending; + __u32 rx_jumbo_pending; + __u32 tx_pending; +}; + +/* for configuring link flow control parameters */ +struct ethtool_pauseparam { + __u32 cmd; /* ETHTOOL_{G,S}PAUSEPARAM */ + + /* If the link is being auto-negotiated (via ethtool_cmd.autoneg + * being true) the user may set 'autonet' here non-zero to have the + * pause parameters be auto-negotiated too. In such a case, the + * {rx,tx}_pause values below determine what capabilities are + * advertised. + * + * If 'autoneg' is zero or the link is not being auto-negotiated, + * then {rx,tx}_pause force the driver to use/not-use pause + * flow control. + */ + __u32 autoneg; + __u32 rx_pause; + __u32 tx_pause; +}; + +#define ETH_GSTRING_LEN 32 +enum ethtool_stringset { + ETH_SS_TEST = 0, + ETH_SS_STATS, + ETH_SS_PRIV_FLAGS, + ETH_SS_NTUPLE_FILTERS, + ETH_SS_FEATURES, +}; + +/* for passing string sets for data tagging */ +struct ethtool_gstrings { + __u32 cmd; /* ETHTOOL_GSTRINGS */ + __u32 string_set; /* string set id e.c. ETH_SS_TEST, etc*/ + __u32 len; /* number of strings in the string set */ + __u8 data[0]; +}; + +struct ethtool_sset_info { + __u32 cmd; /* ETHTOOL_GSSET_INFO */ + __u32 reserved; + __u64 sset_mask; /* input: each bit selects an sset to query */ + /* output: each bit a returned sset */ + __u32 data[0]; /* ETH_SS_xxx count, in order, based on bits + in sset_mask. One bit implies one + __u32, two bits implies two + __u32's, etc. */ +}; + +enum ethtool_test_flags { + ETH_TEST_FL_OFFLINE = (1 << 0), /* online / offline */ + ETH_TEST_FL_FAILED = (1 << 1), /* test passed / failed */ +}; + +/* for requesting NIC test and getting results*/ +struct ethtool_test { + __u32 cmd; /* ETHTOOL_TEST */ + __u32 flags; /* ETH_TEST_FL_xxx */ + __u32 reserved; + __u32 len; /* result length, in number of u64 elements */ + __u64 data[0]; +}; + +/* for dumping NIC-specific statistics */ +struct ethtool_stats { + __u32 cmd; /* ETHTOOL_GSTATS */ + __u32 n_stats; /* number of u64's being returned */ + __u64 data[0]; +}; + +struct ethtool_perm_addr { + __u32 cmd; /* ETHTOOL_GPERMADDR */ + __u32 size; + __u8 data[0]; +}; + +/* boolean flags controlling per-interface behavior characteristics. + * When reading, the flag indicates whether or not a certain behavior + * is enabled/present. When writing, the flag indicates whether + * or not the driver should turn on (set) or off (clear) a behavior. + * + * Some behaviors may read-only (unconditionally absent or present). + * If such is the case, return EINVAL in the set-flags operation if the + * flag differs from the read-only value. + */ +enum ethtool_flags { + ETH_FLAG_TXVLAN = (1 << 7), /* TX VLAN offload enabled */ + ETH_FLAG_RXVLAN = (1 << 8), /* RX VLAN offload enabled */ + ETH_FLAG_LRO = (1 << 15), /* LRO is enabled */ + ETH_FLAG_NTUPLE = (1 << 27), /* N-tuple filters enabled */ + ETH_FLAG_RXHASH = (1 << 28), +}; + +/* The following structures are for supporting RX network flow + * classification and RX n-tuple configuration. Note, all multibyte + * fields, e.g., ip4src, ip4dst, psrc, pdst, spi, etc. are expected to + * be in network byte order. + */ + +/** + * struct ethtool_tcpip4_spec - flow specification for TCP/IPv4 etc. + * @ip4src: Source host + * @ip4dst: Destination host + * @psrc: Source port + * @pdst: Destination port + * @tos: Type-of-service + * + * This can be used to specify a TCP/IPv4, UDP/IPv4 or SCTP/IPv4 flow. + */ +struct ethtool_tcpip4_spec { + __be32 ip4src; + __be32 ip4dst; + __be16 psrc; + __be16 pdst; + __u8 tos; +}; + +/** + * struct ethtool_ah_espip4_spec - flow specification for IPsec/IPv4 + * @ip4src: Source host + * @ip4dst: Destination host + * @spi: Security parameters index + * @tos: Type-of-service + * + * This can be used to specify an IPsec transport or tunnel over IPv4. + */ +struct ethtool_ah_espip4_spec { + __be32 ip4src; + __be32 ip4dst; + __be32 spi; + __u8 tos; +}; + +#define ETH_RX_NFC_IP4 1 + +/** + * struct ethtool_usrip4_spec - general flow specification for IPv4 + * @ip4src: Source host + * @ip4dst: Destination host + * @l4_4_bytes: First 4 bytes of transport (layer 4) header + * @tos: Type-of-service + * @ip_ver: Value must be %ETH_RX_NFC_IP4; mask must be 0 + * @proto: Transport protocol number; mask must be 0 + */ +struct ethtool_usrip4_spec { + __be32 ip4src; + __be32 ip4dst; + __be32 l4_4_bytes; + __u8 tos; + __u8 ip_ver; + __u8 proto; +}; + + +/** + * struct ethtool_rxfh_indir - command to get or set RX flow hash indirection + * @cmd: Specific command number - %ETHTOOL_GRXFHINDIR or %ETHTOOL_SRXFHINDIR + * @size: On entry, the array size of the user buffer. On return from + * %ETHTOOL_GRXFHINDIR, the array size of the hardware indirection table. + * @ring_index: RX ring/queue index for each hash value + */ +struct ethtool_rxfh_indir { + __u32 cmd; + __u32 size; + __u32 ring_index[0]; +}; + +#define ETHTOOL_FLASH_MAX_FILENAME 128 +enum ethtool_flash_op_type { + ETHTOOL_FLASH_ALL_REGIONS = 0, +}; + +/* for passing firmware flashing related parameters */ +struct ethtool_flash { + __u32 cmd; + __u32 region; + char data[ETHTOOL_FLASH_MAX_FILENAME]; +}; + +/* for returning and changing feature sets */ + +/** + * struct ethtool_get_features_block - block with state of 32 features + * @available: mask of changeable features + * @requested: mask of features requested to be enabled if possible + * @active: mask of currently enabled features + * @never_changed: mask of features not changeable for any device + */ +struct ethtool_get_features_block { + __u32 available; + __u32 requested; + __u32 active; + __u32 never_changed; +}; + +/** + * struct ethtool_gfeatures - command to get state of device's features + * @cmd: command number = %ETHTOOL_GFEATURES + * @size: in: number of elements in the features[] array; + * out: number of elements in features[] needed to hold all features + * @features: state of features + */ +struct ethtool_gfeatures { + __u32 cmd; + __u32 size; + struct ethtool_get_features_block features[0]; +}; + +/** + * struct ethtool_set_features_block - block with request for 32 features + * @valid: mask of features to be changed + * @requested: values of features to be changed + */ +struct ethtool_set_features_block { + __u32 valid; + __u32 requested; +}; + +/** + * struct ethtool_sfeatures - command to request change in device's features + * @cmd: command number = %ETHTOOL_SFEATURES + * @size: array size of the features[] array + * @features: feature change masks + */ +struct ethtool_sfeatures { + __u32 cmd; + __u32 size; + struct ethtool_set_features_block features[0]; +}; + +/* + * %ETHTOOL_SFEATURES changes features present in features[].valid to the + * values of corresponding bits in features[].requested. Bits in .requested + * not set in .valid or not changeable are ignored. + * + * Returns %EINVAL when .valid contains undefined or never-changable bits + * or size is not equal to required number of features words (32-bit blocks). + * Returns >= 0 if request was completed; bits set in the value mean: + * %ETHTOOL_F_UNSUPPORTED - there were bits set in .valid that are not + * changeable (not present in %ETHTOOL_GFEATURES' features[].available) + * those bits were ignored. + * %ETHTOOL_F_WISH - some or all changes requested were recorded but the + * resulting state of bits masked by .valid is not equal to .requested. + * Probably there are other device-specific constraints on some features + * in the set. When %ETHTOOL_F_UNSUPPORTED is set, .valid is considered + * here as though ignored bits were cleared. + * %ETHTOOL_F_COMPAT - some or all changes requested were made by calling + * compatibility functions. Requested offload state cannot be properly + * managed by kernel. + * + * Meaning of bits in the masks are obtained by %ETHTOOL_GSSET_INFO (number of + * bits in the arrays - always multiple of 32) and %ETHTOOL_GSTRINGS commands + * for ETH_SS_FEATURES string set. First entry in the table corresponds to least + * significant bit in features[0] fields. Empty strings mark undefined features. + */ +enum ethtool_sfeatures_retval_bits { + ETHTOOL_F_UNSUPPORTED__BIT, + ETHTOOL_F_WISH__BIT, + ETHTOOL_F_COMPAT__BIT, +}; + +#define ETHTOOL_F_UNSUPPORTED (1 << ETHTOOL_F_UNSUPPORTED__BIT) +#define ETHTOOL_F_WISH (1 << ETHTOOL_F_WISH__BIT) +#define ETHTOOL_F_COMPAT (1 << ETHTOOL_F_COMPAT__BIT) + +/* CMDs currently supported */ +#define ETHTOOL_GSET 0x00000001 /* Get settings. */ +#define ETHTOOL_SSET 0x00000002 /* Set settings. */ +#define ETHTOOL_GDRVINFO 0x00000003 /* Get driver info. */ +#define ETHTOOL_GREGS 0x00000004 /* Get NIC registers. */ +#define ETHTOOL_GWOL 0x00000005 /* Get wake-on-lan options. */ +#define ETHTOOL_SWOL 0x00000006 /* Set wake-on-lan options. */ +#define ETHTOOL_GMSGLVL 0x00000007 /* Get driver message level */ +#define ETHTOOL_SMSGLVL 0x00000008 /* Set driver msg level. */ +#define ETHTOOL_NWAY_RST 0x00000009 /* Restart autonegotiation. */ +/* Get link status for host, i.e. whether the interface *and* the + * physical port (if there is one) are up (ethtool_value). */ +#define ETHTOOL_GLINK 0x0000000a +#define ETHTOOL_GEEPROM 0x0000000b /* Get EEPROM data */ +#define ETHTOOL_SEEPROM 0x0000000c /* Set EEPROM data. */ +#define ETHTOOL_GCOALESCE 0x0000000e /* Get coalesce config */ +#define ETHTOOL_SCOALESCE 0x0000000f /* Set coalesce config. */ +#define ETHTOOL_GRINGPARAM 0x00000010 /* Get ring parameters */ +#define ETHTOOL_SRINGPARAM 0x00000011 /* Set ring parameters. */ +#define ETHTOOL_GPAUSEPARAM 0x00000012 /* Get pause parameters */ +#define ETHTOOL_SPAUSEPARAM 0x00000013 /* Set pause parameters. */ +#define ETHTOOL_GRXCSUM 0x00000014 /* Get RX hw csum enable (ethtool_value) */ +#define ETHTOOL_SRXCSUM 0x00000015 /* Set RX hw csum enable (ethtool_value) */ +#define ETHTOOL_GTXCSUM 0x00000016 /* Get TX hw csum enable (ethtool_value) */ +#define ETHTOOL_STXCSUM 0x00000017 /* Set TX hw csum enable (ethtool_value) */ +#define ETHTOOL_GSG 0x00000018 /* Get scatter-gather enable + * (ethtool_value) */ +#define ETHTOOL_SSG 0x00000019 /* Set scatter-gather enable + * (ethtool_value). */ +#define ETHTOOL_TEST 0x0000001a /* execute NIC self-test. */ +#define ETHTOOL_GSTRINGS 0x0000001b /* get specified string set */ +#define ETHTOOL_PHYS_ID 0x0000001c /* identify the NIC */ +#define ETHTOOL_GSTATS 0x0000001d /* get NIC-specific statistics */ +#define ETHTOOL_GTSO 0x0000001e /* Get TSO enable (ethtool_value) */ +#define ETHTOOL_STSO 0x0000001f /* Set TSO enable (ethtool_value) */ +#define ETHTOOL_GPERMADDR 0x00000020 /* Get permanent hardware address */ +#define ETHTOOL_GUFO 0x00000021 /* Get UFO enable (ethtool_value) */ +#define ETHTOOL_SUFO 0x00000022 /* Set UFO enable (ethtool_value) */ +#define ETHTOOL_GGSO 0x00000023 /* Get GSO enable (ethtool_value) */ +#define ETHTOOL_SGSO 0x00000024 /* Set GSO enable (ethtool_value) */ +#define ETHTOOL_GFLAGS 0x00000025 /* Get flags bitmap(ethtool_value) */ +#define ETHTOOL_SFLAGS 0x00000026 /* Set flags bitmap(ethtool_value) */ +#define ETHTOOL_GPFLAGS 0x00000027 /* Get driver-private flags bitmap */ +#define ETHTOOL_SPFLAGS 0x00000028 /* Set driver-private flags bitmap */ + +#define ETHTOOL_GRXFH 0x00000029 /* Get RX flow hash configuration */ +#define ETHTOOL_SRXFH 0x0000002a /* Set RX flow hash configuration */ +#define ETHTOOL_GGRO 0x0000002b /* Get GRO enable (ethtool_value) */ +#define ETHTOOL_SGRO 0x0000002c /* Set GRO enable (ethtool_value) */ +#define ETHTOOL_GRXRINGS 0x0000002d /* Get RX rings available for LB */ +#define ETHTOOL_GRXCLSRLCNT 0x0000002e /* Get RX class rule count */ +#define ETHTOOL_GRXCLSRULE 0x0000002f /* Get RX classification rule */ +#define ETHTOOL_GRXCLSRLALL 0x00000030 /* Get all RX classification rule */ +#define ETHTOOL_SRXCLSRLDEL 0x00000031 /* Delete RX classification rule */ +#define ETHTOOL_SRXCLSRLINS 0x00000032 /* Insert RX classification rule */ +#define ETHTOOL_FLASHDEV 0x00000033 /* Flash firmware to device */ +#define ETHTOOL_RESET 0x00000034 /* Reset hardware */ +#define ETHTOOL_SRXNTUPLE 0x00000035 /* Add an n-tuple filter to device */ +#define ETHTOOL_GRXNTUPLE 0x00000036 /* Get n-tuple filters from device */ +#define ETHTOOL_GSSET_INFO 0x00000037 /* Get string set info */ +#define ETHTOOL_GRXFHINDIR 0x00000038 /* Get RX flow hash indir'n table */ +#define ETHTOOL_SRXFHINDIR 0x00000039 /* Set RX flow hash indir'n table */ + +#define ETHTOOL_GFEATURES 0x0000003a /* Get device offload settings */ +#define ETHTOOL_SFEATURES 0x0000003b /* Change device offload settings */ + +/* compatibility with older code */ +#define SPARC_ETH_GSET ETHTOOL_GSET +#define SPARC_ETH_SSET ETHTOOL_SSET + +/* Indicates what features are supported by the interface. */ +#define SUPPORTED_10baseT_Half (1 << 0) +#define SUPPORTED_10baseT_Full (1 << 1) +#define SUPPORTED_100baseT_Half (1 << 2) +#define SUPPORTED_100baseT_Full (1 << 3) +#define SUPPORTED_1000baseT_Half (1 << 4) +#define SUPPORTED_1000baseT_Full (1 << 5) +#define SUPPORTED_Autoneg (1 << 6) +#define SUPPORTED_TP (1 << 7) +#define SUPPORTED_AUI (1 << 8) +#define SUPPORTED_MII (1 << 9) +#define SUPPORTED_FIBRE (1 << 10) +#define SUPPORTED_BNC (1 << 11) +#define SUPPORTED_10000baseT_Full (1 << 12) +#define SUPPORTED_Pause (1 << 13) +#define SUPPORTED_Asym_Pause (1 << 14) +#define SUPPORTED_2500baseX_Full (1 << 15) +#define SUPPORTED_Backplane (1 << 16) +#define SUPPORTED_1000baseKX_Full (1 << 17) +#define SUPPORTED_10000baseKX4_Full (1 << 18) +#define SUPPORTED_10000baseKR_Full (1 << 19) +#define SUPPORTED_10000baseR_FEC (1 << 20) + +/* Indicates what features are advertised by the interface. */ +#define ADVERTISED_10baseT_Half (1 << 0) +#define ADVERTISED_10baseT_Full (1 << 1) +#define ADVERTISED_100baseT_Half (1 << 2) +#define ADVERTISED_100baseT_Full (1 << 3) +#define ADVERTISED_1000baseT_Half (1 << 4) +#define ADVERTISED_1000baseT_Full (1 << 5) +#define ADVERTISED_Autoneg (1 << 6) +#define ADVERTISED_TP (1 << 7) +#define ADVERTISED_AUI (1 << 8) +#define ADVERTISED_MII (1 << 9) +#define ADVERTISED_FIBRE (1 << 10) +#define ADVERTISED_BNC (1 << 11) +#define ADVERTISED_10000baseT_Full (1 << 12) +#define ADVERTISED_Pause (1 << 13) +#define ADVERTISED_Asym_Pause (1 << 14) +#define ADVERTISED_2500baseX_Full (1 << 15) +#define ADVERTISED_Backplane (1 << 16) +#define ADVERTISED_1000baseKX_Full (1 << 17) +#define ADVERTISED_10000baseKX4_Full (1 << 18) +#define ADVERTISED_10000baseKR_Full (1 << 19) +#define ADVERTISED_10000baseR_FEC (1 << 20) + +/* The following are all involved in forcing a particular link + * mode for the device for setting things. When getting the + * devices settings, these indicate the current mode and whether + * it was foced up into this mode or autonegotiated. + */ + +/* The forced speed, 10Mb, 100Mb, gigabit, 2.5Gb, 10GbE. */ +#define SPEED_10 10 +#define SPEED_100 100 +#define SPEED_1000 1000 +#define SPEED_2500 2500 +#define SPEED_10000 10000 + +/* Duplex, half or full. */ +#define DUPLEX_HALF 0x00 +#define DUPLEX_FULL 0x01 + +/* Which connector port. */ +#define PORT_TP 0x00 +#define PORT_AUI 0x01 +#define PORT_MII 0x02 +#define PORT_FIBRE 0x03 +#define PORT_BNC 0x04 +#define PORT_DA 0x05 +#define PORT_NONE 0xef +#define PORT_OTHER 0xff + +/* Which transceiver to use. */ +#define XCVR_INTERNAL 0x00 +#define XCVR_EXTERNAL 0x01 +#define XCVR_DUMMY1 0x02 +#define XCVR_DUMMY2 0x03 +#define XCVR_DUMMY3 0x04 + +/* Enable or disable autonegotiation. If this is set to enable, + * the forced link modes above are completely ignored. + */ +#define AUTONEG_DISABLE 0x00 +#define AUTONEG_ENABLE 0x01 + +/* Mode MDI or MDI-X */ +#define ETH_TP_MDI_INVALID 0x00 +#define ETH_TP_MDI 0x01 +#define ETH_TP_MDI_X 0x02 + +/* Wake-On-Lan options. */ +#define WAKE_PHY (1 << 0) +#define WAKE_UCAST (1 << 1) +#define WAKE_MCAST (1 << 2) +#define WAKE_BCAST (1 << 3) +#define WAKE_ARP (1 << 4) +#define WAKE_MAGIC (1 << 5) +#define WAKE_MAGICSECURE (1 << 6) /* only meaningful if WAKE_MAGIC */ + +/* L2-L4 network traffic flow types */ +#define TCP_V4_FLOW 0x01 /* hash or spec (tcp_ip4_spec) */ +#define UDP_V4_FLOW 0x02 /* hash or spec (udp_ip4_spec) */ +#define SCTP_V4_FLOW 0x03 /* hash or spec (sctp_ip4_spec) */ +#define AH_ESP_V4_FLOW 0x04 /* hash only */ +#define TCP_V6_FLOW 0x05 /* hash only */ +#define UDP_V6_FLOW 0x06 /* hash only */ +#define SCTP_V6_FLOW 0x07 /* hash only */ +#define AH_ESP_V6_FLOW 0x08 /* hash only */ +#define AH_V4_FLOW 0x09 /* hash or spec (ah_ip4_spec) */ +#define ESP_V4_FLOW 0x0a /* hash or spec (esp_ip4_spec) */ +#define AH_V6_FLOW 0x0b /* hash only */ +#define ESP_V6_FLOW 0x0c /* hash only */ +#define IP_USER_FLOW 0x0d /* spec only (usr_ip4_spec) */ +#define IPV4_FLOW 0x10 /* hash only */ +#define IPV6_FLOW 0x11 /* hash only */ +#define ETHER_FLOW 0x12 /* spec only (ether_spec) */ + +/* L3-L4 network traffic flow hash options */ +#define RXH_L2DA (1 << 1) +#define RXH_VLAN (1 << 2) +#define RXH_L3_PROTO (1 << 3) +#define RXH_IP_SRC (1 << 4) +#define RXH_IP_DST (1 << 5) +#define RXH_L4_B_0_1 (1 << 6) /* src port in case of TCP/UDP/SCTP */ +#define RXH_L4_B_2_3 (1 << 7) /* dst port in case of TCP/UDP/SCTP */ +#define RXH_DISCARD (1 << 31) + +#define RX_CLS_FLOW_DISC 0xffffffffffffffffULL + +/* Reset flags */ +/* The reset() operation must clear the flags for the components which + * were actually reset. On successful return, the flags indicate the + * components which were not reset, either because they do not exist + * in the hardware or because they cannot be reset independently. The + * driver must never reset any components that were not requested. + */ +enum ethtool_reset_flags { + /* These flags represent components dedicated to the interface + * the command is addressed to. Shift any flag left by + * ETH_RESET_SHARED_SHIFT to reset a shared component of the + * same type. + */ + ETH_RESET_MGMT = 1 << 0, /* Management processor */ + ETH_RESET_IRQ = 1 << 1, /* Interrupt requester */ + ETH_RESET_DMA = 1 << 2, /* DMA engine */ + ETH_RESET_FILTER = 1 << 3, /* Filtering/flow direction */ + ETH_RESET_OFFLOAD = 1 << 4, /* Protocol offload */ + ETH_RESET_MAC = 1 << 5, /* Media access controller */ + ETH_RESET_PHY = 1 << 6, /* Transceiver/PHY */ + ETH_RESET_RAM = 1 << 7, /* RAM shared between + * multiple components */ + + ETH_RESET_DEDICATED = 0x0000ffff, /* All components dedicated to + * this interface */ + ETH_RESET_ALL = 0xffffffff, /* All components used by this + * interface, even if shared */ +}; +#define ETH_RESET_SHARED_SHIFT 16 + +#endif /* _LINUX_ETHTOOL_H */ diff --git a/include/linux/mdio.h b/include/linux/mdio.h new file mode 100644 index 0000000..022d772 --- /dev/null +++ b/include/linux/mdio.h @@ -0,0 +1,278 @@ +/* + * linux/mdio.h: definitions for MDIO (clause 45) transceivers + * Copyright 2006-2009 Solarflare Communications Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation, incorporated herein by reference. + */ + +#ifndef __LINUX_MDIO_H__ +#define __LINUX_MDIO_H__ + +#include <linux/mii.h> + +/* MDIO Manageable Devices (MMDs). */ +#define MDIO_MMD_PMAPMD 1 /* Physical Medium Attachment/ + * Physical Medium Dependent */ +#define MDIO_MMD_WIS 2 /* WAN Interface Sublayer */ +#define MDIO_MMD_PCS 3 /* Physical Coding Sublayer */ +#define MDIO_MMD_PHYXS 4 /* PHY Extender Sublayer */ +#define MDIO_MMD_DTEXS 5 /* DTE Extender Sublayer */ +#define MDIO_MMD_TC 6 /* Transmission Convergence */ +#define MDIO_MMD_AN 7 /* Auto-Negotiation */ +#define MDIO_MMD_C22EXT 29 /* Clause 22 extension */ +#define MDIO_MMD_VEND1 30 /* Vendor specific 1 */ +#define MDIO_MMD_VEND2 31 /* Vendor specific 2 */ + +/* Generic MDIO registers. */ +#define MDIO_CTRL1 MII_BMCR +#define MDIO_STAT1 MII_BMSR +#define MDIO_DEVID1 MII_PHYSID1 +#define MDIO_DEVID2 MII_PHYSID2 +#define MDIO_SPEED 4 /* Speed ability */ +#define MDIO_DEVS1 5 /* Devices in package */ +#define MDIO_DEVS2 6 +#define MDIO_CTRL2 7 /* 10G control 2 */ +#define MDIO_STAT2 8 /* 10G status 2 */ +#define MDIO_PMA_TXDIS 9 /* 10G PMA/PMD transmit disable */ +#define MDIO_PMA_RXDET 10 /* 10G PMA/PMD receive signal detect */ +#define MDIO_PMA_EXTABLE 11 /* 10G PMA/PMD extended ability */ +#define MDIO_PKGID1 14 /* Package identifier */ +#define MDIO_PKGID2 15 +#define MDIO_AN_ADVERTISE 16 /* AN advertising (base page) */ +#define MDIO_AN_LPA 19 /* AN LP abilities (base page) */ +#define MDIO_PHYXS_LNSTAT 24 /* PHY XGXS lane state */ + +/* Media-dependent registers. */ +#define MDIO_PMA_10GBT_SWAPPOL 130 /* 10GBASE-T pair swap & polarity */ +#define MDIO_PMA_10GBT_TXPWR 131 /* 10GBASE-T TX power control */ +#define MDIO_PMA_10GBT_SNR 133 /* 10GBASE-T SNR margin, lane A. + * Lanes B-D are numbered 134-136. */ +#define MDIO_PMA_10GBR_FECABLE 170 /* 10GBASE-R FEC ability */ +#define MDIO_PCS_10GBX_STAT1 24 /* 10GBASE-X PCS status 1 */ +#define MDIO_PCS_10GBRT_STAT1 32 /* 10GBASE-R/-T PCS status 1 */ +#define MDIO_PCS_10GBRT_STAT2 33 /* 10GBASE-R/-T PCS status 2 */ +#define MDIO_AN_10GBT_CTRL 32 /* 10GBASE-T auto-negotiation control */ +#define MDIO_AN_10GBT_STAT 33 /* 10GBASE-T auto-negotiation status */ +#define MDIO_AN_EEE_ADV 60 /* EEE advertisement */ + +/* LASI (Link Alarm Status Interrupt) registers, defined by XENPAK MSA. */ +#define MDIO_PMA_LASI_RXCTRL 0x9000 /* RX_ALARM control */ +#define MDIO_PMA_LASI_TXCTRL 0x9001 /* TX_ALARM control */ +#define MDIO_PMA_LASI_CTRL 0x9002 /* LASI control */ +#define MDIO_PMA_LASI_RXSTAT 0x9003 /* RX_ALARM status */ +#define MDIO_PMA_LASI_TXSTAT 0x9004 /* TX_ALARM status */ +#define MDIO_PMA_LASI_STAT 0x9005 /* LASI status */ + +/* Control register 1. */ +/* Enable extended speed selection */ +#define MDIO_CTRL1_SPEEDSELEXT (BMCR_SPEED1000 | BMCR_SPEED100) +/* All speed selection bits */ +#define MDIO_CTRL1_SPEEDSEL (MDIO_CTRL1_SPEEDSELEXT | 0x003c) +#define MDIO_CTRL1_FULLDPLX BMCR_FULLDPLX +#define MDIO_CTRL1_LPOWER BMCR_PDOWN +#define MDIO_CTRL1_RESET BMCR_RESET +#define MDIO_PMA_CTRL1_LOOPBACK 0x0001 +#define MDIO_PMA_CTRL1_SPEED1000 BMCR_SPEED1000 +#define MDIO_PMA_CTRL1_SPEED100 BMCR_SPEED100 +#define MDIO_PCS_CTRL1_LOOPBACK BMCR_LOOPBACK +#define MDIO_PHYXS_CTRL1_LOOPBACK BMCR_LOOPBACK +#define MDIO_AN_CTRL1_RESTART BMCR_ANRESTART +#define MDIO_AN_CTRL1_ENABLE BMCR_ANENABLE +#define MDIO_AN_CTRL1_XNP 0x2000 /* Enable extended next page */ + +/* 10 Gb/s */ +#define MDIO_CTRL1_SPEED10G (MDIO_CTRL1_SPEEDSELEXT | 0x00) +/* 10PASS-TS/2BASE-TL */ +#define MDIO_CTRL1_SPEED10P2B (MDIO_CTRL1_SPEEDSELEXT | 0x04) + +/* Status register 1. */ +#define MDIO_STAT1_LPOWERABLE 0x0002 /* Low-power ability */ +#define MDIO_STAT1_LSTATUS BMSR_LSTATUS +#define MDIO_STAT1_FAULT 0x0080 /* Fault */ +#define MDIO_AN_STAT1_LPABLE 0x0001 /* Link partner AN ability */ +#define MDIO_AN_STAT1_ABLE BMSR_ANEGCAPABLE +#define MDIO_AN_STAT1_RFAULT BMSR_RFAULT +#define MDIO_AN_STAT1_COMPLETE BMSR_ANEGCOMPLETE +#define MDIO_AN_STAT1_PAGE 0x0040 /* Page received */ +#define MDIO_AN_STAT1_XNP 0x0080 /* Extended next page status */ + +/* Speed register. */ +#define MDIO_SPEED_10G 0x0001 /* 10G capable */ +#define MDIO_PMA_SPEED_2B 0x0002 /* 2BASE-TL capable */ +#define MDIO_PMA_SPEED_10P 0x0004 /* 10PASS-TS capable */ +#define MDIO_PMA_SPEED_1000 0x0010 /* 1000M capable */ +#define MDIO_PMA_SPEED_100 0x0020 /* 100M capable */ +#define MDIO_PMA_SPEED_10 0x0040 /* 10M capable */ +#define MDIO_PCS_SPEED_10P2B 0x0002 /* 10PASS-TS/2BASE-TL capable */ + +/* Device present registers. */ +#define MDIO_DEVS_PRESENT(devad) (1 << (devad)) +#define MDIO_DEVS_PMAPMD MDIO_DEVS_PRESENT(MDIO_MMD_PMAPMD) +#define MDIO_DEVS_WIS MDIO_DEVS_PRESENT(MDIO_MMD_WIS) +#define MDIO_DEVS_PCS MDIO_DEVS_PRESENT(MDIO_MMD_PCS) +#define MDIO_DEVS_PHYXS MDIO_DEVS_PRESENT(MDIO_MMD_PHYXS) +#define MDIO_DEVS_DTEXS MDIO_DEVS_PRESENT(MDIO_MMD_DTEXS) +#define MDIO_DEVS_TC MDIO_DEVS_PRESENT(MDIO_MMD_TC) +#define MDIO_DEVS_AN MDIO_DEVS_PRESENT(MDIO_MMD_AN) +#define MDIO_DEVS_C22EXT MDIO_DEVS_PRESENT(MDIO_MMD_C22EXT) +#define MDIO_DEVS_VEND1 MDIO_DEVS_PRESENT(MDIO_MMD_VEND1) +#define MDIO_DEVS_VEND2 MDIO_DEVS_PRESENT(MDIO_MMD_VEND2) + + +/* Control register 2. */ +#define MDIO_PMA_CTRL2_TYPE 0x000f /* PMA/PMD type selection */ +#define MDIO_PMA_CTRL2_10GBCX4 0x0000 /* 10GBASE-CX4 type */ +#define MDIO_PMA_CTRL2_10GBEW 0x0001 /* 10GBASE-EW type */ +#define MDIO_PMA_CTRL2_10GBLW 0x0002 /* 10GBASE-LW type */ +#define MDIO_PMA_CTRL2_10GBSW 0x0003 /* 10GBASE-SW type */ +#define MDIO_PMA_CTRL2_10GBLX4 0x0004 /* 10GBASE-LX4 type */ +#define MDIO_PMA_CTRL2_10GBER 0x0005 /* 10GBASE-ER type */ +#define MDIO_PMA_CTRL2_10GBLR 0x0006 /* 10GBASE-LR type */ +#define MDIO_PMA_CTRL2_10GBSR 0x0007 /* 10GBASE-SR type */ +#define MDIO_PMA_CTRL2_10GBLRM 0x0008 /* 10GBASE-LRM type */ +#define MDIO_PMA_CTRL2_10GBT 0x0009 /* 10GBASE-T type */ +#define MDIO_PMA_CTRL2_10GBKX4 0x000a /* 10GBASE-KX4 type */ +#define MDIO_PMA_CTRL2_10GBKR 0x000b /* 10GBASE-KR type */ +#define MDIO_PMA_CTRL2_1000BT 0x000c /* 1000BASE-T type */ +#define MDIO_PMA_CTRL2_1000BKX 0x000d /* 1000BASE-KX type */ +#define MDIO_PMA_CTRL2_100BTX 0x000e /* 100BASE-TX type */ +#define MDIO_PMA_CTRL2_10BT 0x000f /* 10BASE-T type */ +#define MDIO_PCS_CTRL2_TYPE 0x0003 /* PCS type selection */ +#define MDIO_PCS_CTRL2_10GBR 0x0000 /* 10GBASE-R type */ +#define MDIO_PCS_CTRL2_10GBX 0x0001 /* 10GBASE-X type */ +#define MDIO_PCS_CTRL2_10GBW 0x0002 /* 10GBASE-W type */ +#define MDIO_PCS_CTRL2_10GBT 0x0003 /* 10GBASE-T type */ + +/* Status register 2. */ +#define MDIO_STAT2_RXFAULT 0x0400 /* Receive fault */ +#define MDIO_STAT2_TXFAULT 0x0800 /* Transmit fault */ +#define MDIO_STAT2_DEVPRST 0xc000 /* Device present */ +#define MDIO_STAT2_DEVPRST_VAL 0x8000 /* Device present value */ +#define MDIO_PMA_STAT2_LBABLE 0x0001 /* PMA loopback ability */ +#define MDIO_PMA_STAT2_10GBEW 0x0002 /* 10GBASE-EW ability */ +#define MDIO_PMA_STAT2_10GBLW 0x0004 /* 10GBASE-LW ability */ +#define MDIO_PMA_STAT2_10GBSW 0x0008 /* 10GBASE-SW ability */ +#define MDIO_PMA_STAT2_10GBLX4 0x0010 /* 10GBASE-LX4 ability */ +#define MDIO_PMA_STAT2_10GBER 0x0020 /* 10GBASE-ER ability */ +#define MDIO_PMA_STAT2_10GBLR 0x0040 /* 10GBASE-LR ability */ +#define MDIO_PMA_STAT2_10GBSR 0x0080 /* 10GBASE-SR ability */ +#define MDIO_PMD_STAT2_TXDISAB 0x0100 /* PMD TX disable ability */ +#define MDIO_PMA_STAT2_EXTABLE 0x0200 /* Extended abilities */ +#define MDIO_PMA_STAT2_RXFLTABLE 0x1000 /* Receive fault ability */ +#define MDIO_PMA_STAT2_TXFLTABLE 0x2000 /* Transmit fault ability */ +#define MDIO_PCS_STAT2_10GBR 0x0001 /* 10GBASE-R capable */ +#define MDIO_PCS_STAT2_10GBX 0x0002 /* 10GBASE-X capable */ +#define MDIO_PCS_STAT2_10GBW 0x0004 /* 10GBASE-W capable */ +#define MDIO_PCS_STAT2_RXFLTABLE 0x1000 /* Receive fault ability */ +#define MDIO_PCS_STAT2_TXFLTABLE 0x2000 /* Transmit fault ability */ + +/* Transmit disable register. */ +#define MDIO_PMD_TXDIS_GLOBAL 0x0001 /* Global PMD TX disable */ +#define MDIO_PMD_TXDIS_0 0x0002 /* PMD TX disable 0 */ +#define MDIO_PMD_TXDIS_1 0x0004 /* PMD TX disable 1 */ +#define MDIO_PMD_TXDIS_2 0x0008 /* PMD TX disable 2 */ +#define MDIO_PMD_TXDIS_3 0x0010 /* PMD TX disable 3 */ + +/* Receive signal detect register. */ +#define MDIO_PMD_RXDET_GLOBAL 0x0001 /* Global PMD RX signal detect */ +#define MDIO_PMD_RXDET_0 0x0002 /* PMD RX signal detect 0 */ +#define MDIO_PMD_RXDET_1 0x0004 /* PMD RX signal detect 1 */ +#define MDIO_PMD_RXDET_2 0x0008 /* PMD RX signal detect 2 */ +#define MDIO_PMD_RXDET_3 0x0010 /* PMD RX signal detect 3 */ + +/* Extended abilities register. */ +#define MDIO_PMA_EXTABLE_10GCX4 0x0001 /* 10GBASE-CX4 ability */ +#define MDIO_PMA_EXTABLE_10GBLRM 0x0002 /* 10GBASE-LRM ability */ +#define MDIO_PMA_EXTABLE_10GBT 0x0004 /* 10GBASE-T ability */ +#define MDIO_PMA_EXTABLE_10GBKX4 0x0008 /* 10GBASE-KX4 ability */ +#define MDIO_PMA_EXTABLE_10GBKR 0x0010 /* 10GBASE-KR ability */ +#define MDIO_PMA_EXTABLE_1000BT 0x0020 /* 1000BASE-T ability */ +#define MDIO_PMA_EXTABLE_1000BKX 0x0040 /* 1000BASE-KX ability */ +#define MDIO_PMA_EXTABLE_100BTX 0x0080 /* 100BASE-TX ability */ +#define MDIO_PMA_EXTABLE_10BT 0x0100 /* 10BASE-T ability */ + +/* PHY XGXS lane state register. */ +#define MDIO_PHYXS_LNSTAT_SYNC0 0x0001 +#define MDIO_PHYXS_LNSTAT_SYNC1 0x0002 +#define MDIO_PHYXS_LNSTAT_SYNC2 0x0004 +#define MDIO_PHYXS_LNSTAT_SYNC3 0x0008 +#define MDIO_PHYXS_LNSTAT_ALIGN 0x1000 + +/* PMA 10GBASE-T pair swap & polarity */ +#define MDIO_PMA_10GBT_SWAPPOL_ABNX 0x0001 /* Pair A/B uncrossed */ +#define MDIO_PMA_10GBT_SWAPPOL_CDNX 0x0002 /* Pair C/D uncrossed */ +#define MDIO_PMA_10GBT_SWAPPOL_AREV 0x0100 /* Pair A polarity reversed */ +#define MDIO_PMA_10GBT_SWAPPOL_BREV 0x0200 /* Pair B polarity reversed */ +#define MDIO_PMA_10GBT_SWAPPOL_CREV 0x0400 /* Pair C polarity reversed */ +#define MDIO_PMA_10GBT_SWAPPOL_DREV 0x0800 /* Pair D polarity reversed */ + +/* PMA 10GBASE-T TX power register. */ +#define MDIO_PMA_10GBT_TXPWR_SHORT 0x0001 /* Short-reach mode */ + +/* PMA 10GBASE-T SNR registers. */ +/* Value is SNR margin in dB, clamped to range [-127, 127], plus 0x8000. */ +#define MDIO_PMA_10GBT_SNR_BIAS 0x8000 +#define MDIO_PMA_10GBT_SNR_MAX 127 + +/* PMA 10GBASE-R FEC ability register. */ +#define MDIO_PMA_10GBR_FECABLE_ABLE 0x0001 /* FEC ability */ +#define MDIO_PMA_10GBR_FECABLE_ERRABLE 0x0002 /* FEC error indic. ability */ + +/* PCS 10GBASE-R/-T status register 1. */ +#define MDIO_PCS_10GBRT_STAT1_BLKLK 0x0001 /* Block lock attained */ + +/* PCS 10GBASE-R/-T status register 2. */ +#define MDIO_PCS_10GBRT_STAT2_ERR 0x00ff +#define MDIO_PCS_10GBRT_STAT2_BER 0x3f00 + +/* AN 10GBASE-T control register. */ +#define MDIO_AN_10GBT_CTRL_ADV10G 0x1000 /* Advertise 10GBASE-T */ + +/* AN 10GBASE-T status register. */ +#define MDIO_AN_10GBT_STAT_LPTRR 0x0200 /* LP training reset req. */ +#define MDIO_AN_10GBT_STAT_LPLTABLE 0x0400 /* LP loop timing ability */ +#define MDIO_AN_10GBT_STAT_LP10G 0x0800 /* LP is 10GBT capable */ +#define MDIO_AN_10GBT_STAT_REMOK 0x1000 /* Remote OK */ +#define MDIO_AN_10GBT_STAT_LOCOK 0x2000 /* Local OK */ +#define MDIO_AN_10GBT_STAT_MS 0x4000 /* Master/slave config */ +#define MDIO_AN_10GBT_STAT_MSFLT 0x8000 /* Master/slave config fault */ + +/* AN EEE Advertisement register. */ +#define MDIO_AN_EEE_ADV_100TX 0x0002 /* Advertise 100TX EEE cap */ +#define MDIO_AN_EEE_ADV_1000T 0x0004 /* Advertise 1000T EEE cap */ + +/* LASI RX_ALARM control/status registers. */ +#define MDIO_PMA_LASI_RX_PHYXSLFLT 0x0001 /* PHY XS RX local fault */ +#define MDIO_PMA_LASI_RX_PCSLFLT 0x0008 /* PCS RX local fault */ +#define MDIO_PMA_LASI_RX_PMALFLT 0x0010 /* PMA/PMD RX local fault */ +#define MDIO_PMA_LASI_RX_OPTICPOWERFLT 0x0020 /* RX optical power fault */ +#define MDIO_PMA_LASI_RX_WISLFLT 0x0200 /* WIS local fault */ + +/* LASI TX_ALARM control/status registers. */ +#define MDIO_PMA_LASI_TX_PHYXSLFLT 0x0001 /* PHY XS TX local fault */ +#define MDIO_PMA_LASI_TX_PCSLFLT 0x0008 /* PCS TX local fault */ +#define MDIO_PMA_LASI_TX_PMALFLT 0x0010 /* PMA/PMD TX local fault */ +#define MDIO_PMA_LASI_TX_LASERPOWERFLT 0x0080 /* Laser output power fault */ +#define MDIO_PMA_LASI_TX_LASERTEMPFLT 0x0100 /* Laser temperature fault */ +#define MDIO_PMA_LASI_TX_LASERBICURRFLT 0x0200 /* Laser bias current fault */ + +/* LASI control/status registers. */ +#define MDIO_PMA_LASI_LSALARM 0x0001 /* LS_ALARM enable/status */ +#define MDIO_PMA_LASI_TXALARM 0x0002 /* TX_ALARM enable/status */ +#define MDIO_PMA_LASI_RXALARM 0x0004 /* RX_ALARM enable/status */ + +/* Mapping between MDIO PRTAD/DEVAD and mii_ioctl_data::phy_id */ + +#define MDIO_PHY_ID_C45 0x8000 +#define MDIO_PHY_ID_PRTAD 0x03e0 +#define MDIO_PHY_ID_DEVAD 0x001f +#define MDIO_PHY_ID_C45_MASK \ + (MDIO_PHY_ID_C45 | MDIO_PHY_ID_PRTAD | MDIO_PHY_ID_DEVAD) + +#define MDIO_PRTAD_NONE (-1) +#define MDIO_DEVAD_NONE (-1) +#define MDIO_EMULATE_C22 4 + +#endif /* __LINUX_MDIO_H__ */ diff --git a/include/miiphy.h b/include/miiphy.h index 42dc127..7e70cf8 100644 --- a/include/miiphy.h +++ b/include/miiphy.h @@ -34,35 +34,52 @@ #ifndef _miiphy_h_ #define _miiphy_h_ +#include <common.h> #include <linux/mii.h> +#include <linux/list.h> #include <net.h> +#include <phy.h> -int miiphy_read (const char *devname, unsigned char addr, unsigned char reg, +struct legacy_mii_dev { + int (*read)(const char *devname, unsigned char addr, + unsigned char reg, unsigned short *value); + int (*write)(const char *devname, unsigned char addr, + unsigned char reg, unsigned short value); +}; + +int miiphy_read(const char *devname, unsigned char addr, unsigned char reg, unsigned short *value); -int miiphy_write (const char *devname, unsigned char addr, unsigned char reg, +int miiphy_write(const char *devname, unsigned char addr, unsigned char reg, unsigned short value); -int miiphy_info (const char *devname, unsigned char addr, unsigned int *oui, +int miiphy_info(const char *devname, unsigned char addr, unsigned int *oui, unsigned char *model, unsigned char *rev); -int miiphy_reset (const char *devname, unsigned char addr); -int miiphy_speed (const char *devname, unsigned char addr); -int miiphy_duplex (const char *devname, unsigned char addr); -int miiphy_is_1000base_x (const char *devname, unsigned char addr); +int miiphy_reset(const char *devname, unsigned char addr); +int miiphy_speed(const char *devname, unsigned char addr); +int miiphy_duplex(const char *devname, unsigned char addr); +int miiphy_is_1000base_x(const char *devname, unsigned char addr); #ifdef CONFIG_SYS_FAULT_ECHO_LINK_DOWN -int miiphy_link (const char *devname, unsigned char addr); +int miiphy_link(const char *devname, unsigned char addr); #endif -void miiphy_init (void); +void miiphy_init(void); -void miiphy_register (const char *devname, - int (*read) (const char *devname, unsigned char addr, +void miiphy_register(const char *devname, + int (*read)(const char *devname, unsigned char addr, unsigned char reg, unsigned short *value), - int (*write) (const char *devname, unsigned char addr, + int (*write)(const char *devname, unsigned char addr, unsigned char reg, unsigned short value)); -int miiphy_set_current_dev (const char *devname); -const char *miiphy_get_current_dev (void); +int miiphy_set_current_dev(const char *devname); +const char *miiphy_get_current_dev(void); +struct mii_dev *mdio_get_current_dev(void); +struct mii_dev *miiphy_get_dev_by_name(const char *devname); +struct phy_device *mdio_phydev_for_ethname(const char *devname); + +void miiphy_listdev(void); -void miiphy_listdev (void); +struct mii_dev *mdio_alloc(void); +int mdio_register(struct mii_dev *bus); +void mdio_list_devices(void); #ifdef CONFIG_BITBANGMII @@ -85,10 +102,10 @@ struct bb_miiphy_bus { extern struct bb_miiphy_bus bb_miiphy_buses[]; extern int bb_miiphy_buses_num; -void bb_miiphy_init (void); -int bb_miiphy_read (const char *devname, unsigned char addr, +void bb_miiphy_init(void); +int bb_miiphy_read(const char *devname, unsigned char addr, unsigned char reg, unsigned short *value); -int bb_miiphy_write (const char *devname, unsigned char addr, +int bb_miiphy_write(const char *devname, unsigned char addr, unsigned char reg, unsigned short value); #endif diff --git a/include/mmc.h b/include/mmc.h index fcd0fd1..f7f2286 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -14,7 +14,7 @@ * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License @@ -44,6 +44,7 @@ #define MMC_MODE_HS_52MHz 0x010 #define MMC_MODE_4BIT 0x100 #define MMC_MODE_8BIT 0x200 +#define MMC_MODE_SPI 0x400 #define SD_DATA_4BIT 0x00040000 @@ -75,6 +76,8 @@ #define MMC_CMD_WRITE_SINGLE_BLOCK 24 #define MMC_CMD_WRITE_MULTIPLE_BLOCK 25 #define MMC_CMD_APP_CMD 55 +#define MMC_CMD_SPI_READ_OCR 58 +#define MMC_CMD_SPI_CRC_ON_OFF 59 #define SD_CMD_SEND_RELATIVE_ADDR 3 #define SD_CMD_SWITCH_FUNC 6 @@ -91,8 +94,14 @@ #define MMC_HS_TIMING 0x00000100 #define MMC_HS_52MHZ 0x2 -#define OCR_BUSY 0x80000000 -#define OCR_HCS 0x40000000 +#define OCR_BUSY 0x80000000 +#define OCR_HCS 0x40000000 +#define OCR_VOLTAGE_MASK 0x007FFF80 +#define OCR_ACCESS_MODE 0x60000000 + +#define MMC_STATUS_MASK (~0x0206BF7F) +#define MMC_STATUS_RDY_FOR_DATA (1 << 8) +#define MMC_STATUS_CURR_STATE (0xf << 9) #define MMC_VDD_165_195 0x00000080 /* VDD voltage 1.65 - 1.95 */ #define MMC_VDD_20_21 0x00000100 /* VDD voltage 2.0 ~ 2.1 */ @@ -138,12 +147,12 @@ * EXT_CSD field definitions */ -#define EXT_CSD_CMD_SET_NORMAL (1<<0) -#define EXT_CSD_CMD_SET_SECURE (1<<1) -#define EXT_CSD_CMD_SET_CPSECURE (1<<2) +#define EXT_CSD_CMD_SET_NORMAL (1 << 0) +#define EXT_CSD_CMD_SET_SECURE (1 << 1) +#define EXT_CSD_CMD_SET_CPSECURE (1 << 2) -#define EXT_CSD_CARD_TYPE_26 (1<<0) /* Card can run at 26MHz */ -#define EXT_CSD_CARD_TYPE_52 (1<<1) /* Card can run at 52MHz */ +#define EXT_CSD_CARD_TYPE_26 (1 << 0) /* Card can run at 26MHz */ +#define EXT_CSD_CARD_TYPE_52 (1 << 1) /* Card can run at 52MHz */ #define EXT_CSD_BUS_WIDTH_1 0 /* Card is in 1 bit mode */ #define EXT_CSD_BUS_WIDTH_4 1 /* Card is in 4 bit mode */ @@ -153,21 +162,21 @@ #define R1_APP_CMD (1 << 5) #define MMC_RSP_PRESENT (1 << 0) -#define MMC_RSP_136 (1 << 1) /* 136 bit response */ -#define MMC_RSP_CRC (1 << 2) /* expect valid crc */ -#define MMC_RSP_BUSY (1 << 3) /* card may send busy */ -#define MMC_RSP_OPCODE (1 << 4) /* response contains opcode */ +#define MMC_RSP_136 (1 << 1) /* 136 bit response */ +#define MMC_RSP_CRC (1 << 2) /* expect valid crc */ +#define MMC_RSP_BUSY (1 << 3) /* card may send busy */ +#define MMC_RSP_OPCODE (1 << 4) /* response contains opcode */ -#define MMC_RSP_NONE (0) -#define MMC_RSP_R1 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE) +#define MMC_RSP_NONE (0) +#define MMC_RSP_R1 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE) #define MMC_RSP_R1b (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE| \ MMC_RSP_BUSY) -#define MMC_RSP_R2 (MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC) -#define MMC_RSP_R3 (MMC_RSP_PRESENT) -#define MMC_RSP_R4 (MMC_RSP_PRESENT) -#define MMC_RSP_R5 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE) -#define MMC_RSP_R6 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE) -#define MMC_RSP_R7 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE) +#define MMC_RSP_R2 (MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC) +#define MMC_RSP_R3 (MMC_RSP_PRESENT) +#define MMC_RSP_R4 (MMC_RSP_PRESENT) +#define MMC_RSP_R5 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE) +#define MMC_RSP_R6 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE) +#define MMC_RSP_R7 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE) struct mmc_cid { @@ -274,9 +283,7 @@ struct mmc { struct mmc_cmd *cmd, struct mmc_data *data); void (*set_ios)(struct mmc *mmc); int (*init)(struct mmc *mmc); -#ifdef CONFIG_MMC_MBLOCK uint b_max; -#endif }; int mmc_register(struct mmc *mmc); @@ -291,6 +298,8 @@ int board_mmc_getcd(u8 *cd, struct mmc *mmc); #ifdef CONFIG_GENERIC_MMC int atmel_mci_init(void *regs); +#define mmc_host_is_spi(mmc) ((mmc)->host_caps & MMC_MODE_SPI) +struct mmc *mmc_spi_init(uint bus, uint cs, uint speed, uint mode); #else int mmc_legacy_init(int verbose); #endif diff --git a/include/pci_ids.h b/include/pci_ids.h index cb8398d..02a6c6e 100644 --- a/include/pci_ids.h +++ b/include/pci_ids.h @@ -1853,6 +1853,7 @@ #define PCI_DEVICE_ID_INTEL_82573E 0x108B #define PCI_DEVICE_ID_INTEL_82573E_IAMT 0x108C #define PCI_DEVICE_ID_INTEL_82573L 0x109A +#define PCI_DEVICE_ID_INTEL_82574L 0x10D3 #define PCI_DEVICE_ID_INTEL_82546GB_QUAD_COPPER_KSP3 0x10B5 #define PCI_DEVICE_ID_INTEL_80003ES2LAN_COPPER_DPT 0x1096 #define PCI_DEVICE_ID_INTEL_80003ES2LAN_SERDES_DPT 0x1098 diff --git a/include/phy.h b/include/phy.h new file mode 100644 index 0000000..d5817bf --- /dev/null +++ b/include/phy.h @@ -0,0 +1,229 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. + * Andy Fleming <afleming@freescale.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * This file pretty much stolen from Linux's mii.h/ethtool.h/phy.h + */ + +#ifndef _PHY_H +#define _PHY_H + +#include <linux/list.h> +#include <linux/mii.h> +#include <linux/ethtool.h> +#include <linux/mdio.h> + +#define PHY_MAX_ADDR 32 + +#define PHY_BASIC_FEATURES (SUPPORTED_10baseT_Half | \ + SUPPORTED_10baseT_Full | \ + SUPPORTED_100baseT_Half | \ + SUPPORTED_100baseT_Full | \ + SUPPORTED_Autoneg | \ + SUPPORTED_TP | \ + SUPPORTED_MII) + +#define PHY_GBIT_FEATURES (PHY_BASIC_FEATURES | \ + SUPPORTED_1000baseT_Half | \ + SUPPORTED_1000baseT_Full) + +#define PHY_10G_FEATURES (PHY_GBIT_FEATURES | \ + SUPPORTED_10000baseT_Full) + +#define PHY_ANEG_TIMEOUT 4000 + + +typedef enum { + PHY_INTERFACE_MODE_MII, + PHY_INTERFACE_MODE_GMII, + PHY_INTERFACE_MODE_SGMII, + PHY_INTERFACE_MODE_TBI, + PHY_INTERFACE_MODE_RMII, + PHY_INTERFACE_MODE_RGMII, + PHY_INTERFACE_MODE_RGMII_ID, + PHY_INTERFACE_MODE_RGMII_RXID, + PHY_INTERFACE_MODE_RGMII_TXID, + PHY_INTERFACE_MODE_RTBI, + PHY_INTERFACE_MODE_XGMII, + PHY_INTERFACE_MODE_NONE /* Must be last */ +} phy_interface_t; + +static const char *phy_interface_strings[] = { + [PHY_INTERFACE_MODE_MII] = "mii", + [PHY_INTERFACE_MODE_GMII] = "gmii", + [PHY_INTERFACE_MODE_SGMII] = "sgmii", + [PHY_INTERFACE_MODE_TBI] = "tbi", + [PHY_INTERFACE_MODE_RMII] = "rmii", + [PHY_INTERFACE_MODE_RGMII] = "rgmii", + [PHY_INTERFACE_MODE_RGMII_ID] = "rgmii-id", + [PHY_INTERFACE_MODE_RGMII_RXID] = "rgmii-rxid", + [PHY_INTERFACE_MODE_RGMII_TXID] = "rgmii-txid", + [PHY_INTERFACE_MODE_RTBI] = "rtbi", + [PHY_INTERFACE_MODE_XGMII] = "xgmii", + [PHY_INTERFACE_MODE_NONE] = "", +}; + +static inline const char *phy_string_for_interface(phy_interface_t i) +{ + /* Default to unknown */ + if (i > PHY_INTERFACE_MODE_NONE) + i = PHY_INTERFACE_MODE_NONE; + + return phy_interface_strings[i]; +} + + +struct phy_device; + +#define MDIO_NAME_LEN 32 + +struct mii_dev { + struct list_head link; + char name[MDIO_NAME_LEN]; + void *priv; + int (*read)(struct mii_dev *bus, int addr, int devad, int reg); + int (*write)(struct mii_dev *bus, int addr, int devad, int reg, + u16 val); + int (*reset)(struct mii_dev *bus); + struct phy_device *phymap[PHY_MAX_ADDR]; + u32 phy_mask; +}; + +/* struct phy_driver: a structure which defines PHY behavior + * + * uid will contain a number which represents the PHY. During + * startup, the driver will poll the PHY to find out what its + * UID--as defined by registers 2 and 3--is. The 32-bit result + * gotten from the PHY will be masked to + * discard any bits which may change based on revision numbers + * unimportant to functionality + * + */ +struct phy_driver { + char *name; + unsigned int uid; + unsigned int mask; + unsigned int mmds; + + u32 features; + + /* Called to do any driver startup necessities */ + /* Will be called during phy_connect */ + int (*probe)(struct phy_device *phydev); + + /* Called to configure the PHY, and modify the controller + * based on the results. Should be called after phy_connect */ + int (*config)(struct phy_device *phydev); + + /* Called when starting up the controller */ + int (*startup)(struct phy_device *phydev); + + /* Called when bringing down the controller */ + int (*shutdown)(struct phy_device *phydev); + + struct list_head list; +}; + +struct phy_device { + /* Information about the PHY type */ + /* And management functions */ + struct mii_dev *bus; + struct phy_driver *drv; + void *priv; + + struct eth_device *dev; + + /* forced speed & duplex (no autoneg) + * partner speed & duplex & pause (autoneg) + */ + int speed; + int duplex; + + /* The most recently read link state */ + int link; + int port; + phy_interface_t interface; + + u32 advertising; + u32 supported; + u32 mmds; + + int autoneg; + int addr; + int pause; + int asym_pause; + u32 phy_id; + u32 flags; +}; + +static inline int phy_read(struct phy_device *phydev, int devad, int regnum) +{ + struct mii_dev *bus = phydev->bus; + + return bus->read(bus, phydev->addr, devad, regnum); +} + +static inline int phy_write(struct phy_device *phydev, int devad, int regnum, + u16 val) +{ + struct mii_dev *bus = phydev->bus; + + return bus->write(bus, phydev->addr, devad, regnum, val); +} + +#ifdef CONFIG_PHYLIB_10G +extern struct phy_driver gen10g_driver; + +/* For now, XGMII is the only 10G interface */ +static inline int is_10g_interface(phy_interface_t interface) +{ + return interface == PHY_INTERFACE_MODE_XGMII; +} + +#endif + +int phy_init(void); +int phy_reset(struct phy_device *phydev); +struct phy_device *phy_connect(struct mii_dev *bus, int addr, + struct eth_device *dev, + phy_interface_t interface); +int phy_startup(struct phy_device *phydev); +int phy_config(struct phy_device *phydev); +int phy_shutdown(struct phy_device *phydev); +int phy_register(struct phy_driver *drv); +int genphy_config_aneg(struct phy_device *phydev); +int genphy_update_link(struct phy_device *phydev); +int genphy_config(struct phy_device *phydev); +int genphy_startup(struct phy_device *phydev); +int genphy_shutdown(struct phy_device *phydev); +int gen10g_config(struct phy_device *phydev); +int gen10g_startup(struct phy_device *phydev); +int gen10g_shutdown(struct phy_device *phydev); +int gen10g_discover_mmds(struct phy_device *phydev); + +int phy_atheros_init(void); +int phy_broadcom_init(void); +int phy_davicom_init(void); +int phy_lxt_init(void); +int phy_marvell_init(void); +int phy_micrel_init(void); +int phy_natsemi_init(void); +int phy_realtek_init(void); +int phy_teranetics_init(void); +int phy_vitesse_init(void); +#endif diff --git a/include/search.h b/include/search.h index a7c1293..c827d4d 100644 --- a/include/search.h +++ b/include/search.h @@ -80,6 +80,12 @@ extern int hsearch_r(ENTRY __item, ACTION __action, ENTRY ** __retval, */ extern int hmatch_r(const char *__match, int __last_idx, ENTRY ** __retval, struct hsearch_data *__htab); +/* + * Search for an entry whose key or data contains `MATCH'. Otherwise, + * Same semantics as hsearch_r(). + */ +extern int hstrstr_r(const char *__match, int __last_idx, ENTRY ** __retval, + struct hsearch_data *__htab); /* Search and delete entry matching ITEM.key in internal hash table. */ extern int hdelete_r(const char *__key, struct hsearch_data *__htab); diff --git a/include/spi.h b/include/spi.h index 320e50e..60e85db 100644 --- a/include/spi.h +++ b/include/spi.h @@ -26,13 +26,6 @@ /* Controller-specific definitions: */ -/* CONFIG_HARD_SPI triggers SPI bus initialization in PowerPC */ -#ifdef CONFIG_MPC8XXX_SPI -# ifndef CONFIG_HARD_SPI -# define CONFIG_HARD_SPI -# endif -#endif - /* SPI mode flags */ #define SPI_CPHA 0x01 /* clock phase */ #define SPI_CPOL 0x02 /* clock polarity */ @@ -176,6 +169,14 @@ void spi_cs_activate(struct spi_slave *slave); void spi_cs_deactivate(struct spi_slave *slave); /*----------------------------------------------------------------------- + * Set transfer speed. + * This sets a new speed to be applied for next spi_xfer(). + * slave: The SPI slave + * hz: The transfer speed + */ +void spi_set_speed(struct spi_slave *slave, uint hz); + +/*----------------------------------------------------------------------- * Write 8 bits, then read 8 bits. * slave: The SPI slave we're communicating with * byte: Byte to be written diff --git a/include/spi_flash.h b/include/spi_flash.h index 1f8ba29..a384071 100644 --- a/include/spi_flash.h +++ b/include/spi_flash.h @@ -26,11 +26,6 @@ #include <spi.h> #include <linux/types.h> -struct spi_flash_region { - unsigned int count; - unsigned int size; -}; - struct spi_flash { struct spi_slave *spi; @@ -38,6 +33,8 @@ struct spi_flash { u32 size; + u32 sector_size; + int (*read)(struct spi_flash *flash, u32 offset, size_t len, void *buf); int (*write)(struct spi_flash *flash, u32 offset, diff --git a/include/tsec.h b/include/tsec.h index d56ec2c..f0f3d4d 100644 --- a/include/tsec.h +++ b/include/tsec.h @@ -7,7 +7,7 @@ * terms of the GNU Public License, Version 2, incorporated * herein by reference. * - * Copyright 2004, 2007, 2009 Freescale Semiconductor, Inc. + * Copyright 2004, 2007, 2009, 2011 Freescale Semiconductor, Inc. * (C) Copyright 2003, Motorola, Inc. * maintained by Xianghua Xiao (x.xiao@motorola.com) * author Andy Fleming @@ -19,30 +19,36 @@ #include <net.h> #include <config.h> +#include <phy.h> +#include <asm/fsl_enet.h> #define TSEC_SIZE 0x01000 #define TSEC_MDIO_OFFSET 0x01000 +#define CONFIG_SYS_MDIO_BASE_ADDR (MDIO_BASE_ADDR + 0x520) + +#define DEFAULT_MII_NAME "FSL_MDIO" + #define STD_TSEC_INFO(num) \ { \ .regs = (tsec_t *)(TSEC_BASE_ADDR + ((num - 1) * TSEC_SIZE)), \ - .miiregs = (tsec_mdio_t *)(MDIO_BASE_ADDR), \ - .miiregs_sgmii = (tsec_mdio_t *)(MDIO_BASE_ADDR \ + .miiregs_sgmii = (struct tsec_mii_mng *)(CONFIG_SYS_MDIO_BASE_ADDR \ + (num - 1) * TSEC_MDIO_OFFSET), \ .devname = CONFIG_TSEC##num##_NAME, \ .phyaddr = TSEC##num##_PHY_ADDR, \ - .flags = TSEC##num##_FLAGS \ + .flags = TSEC##num##_FLAGS, \ + .mii_devname = DEFAULT_MII_NAME \ } #define SET_STD_TSEC_INFO(x, num) \ { \ x.regs = (tsec_t *)(TSEC_BASE_ADDR + ((num - 1) * TSEC_SIZE)); \ - x.miiregs = (tsec_mdio_t *)(MDIO_BASE_ADDR); \ - x.miiregs_sgmii = (tsec_mdio_t *)(MDIO_BASE_ADDR \ + x.miiregs_sgmii = (struct tsec_mii_mng *)(CONFIG_SYS_MDIO_BASE_ADDR \ + (num - 1) * TSEC_MDIO_OFFSET); \ x.devname = CONFIG_TSEC##num##_NAME; \ x.phyaddr = TSEC##num##_PHY_ADDR; \ x.flags = TSEC##num##_FLAGS;\ + x.mii_devname = DEFAULT_MII_NAME;\ } #define MAC_ADDR_LEN 6 @@ -51,8 +57,6 @@ #define TSEC_TIMEOUT 1000 #define TOUT_LOOP 1000000 -#define PHY_AUTONEGOTIATE_TIMEOUT 5000 /* in ms */ - /* TBI register addresses */ #define TBI_CR 0x00 #define TBI_SR 0x01 @@ -96,204 +100,14 @@ #define ECNTRL_INIT_SETTINGS 0x00001000 #define ECNTRL_TBI_MODE 0x00000020 +#define ECNTRL_REDUCED_MODE 0x00000010 #define ECNTRL_R100 0x00000008 +#define ECNTRL_REDUCED_MII_MODE 0x00000004 #define ECNTRL_SGMII_MODE 0x00000002 -#define miim_end -2 -#define miim_read -1 - #ifndef CONFIG_SYS_TBIPA_VALUE #define CONFIG_SYS_TBIPA_VALUE 0x1f #endif -#define MIIMCFG_INIT_VALUE 0x00000003 -#define MIIMCFG_RESET 0x80000000 - -#define MIIMIND_BUSY 0x00000001 -#define MIIMIND_NOTVALID 0x00000004 - -#define MIIM_CONTROL 0x00 -#define MIIM_CONTROL_RESET 0x00009140 -#define MIIM_CONTROL_INIT 0x00001140 -#define MIIM_CONTROL_RESTART 0x00001340 -#define MIIM_ANEN 0x00001000 - -#define MIIM_CR 0x00 -#define MIIM_CR_RST 0x00008000 -#define MIIM_CR_INIT 0x00001000 - -#define MIIM_STATUS 0x1 -#define MIIM_STATUS_AN_DONE 0x00000020 -#define MIIM_STATUS_LINK 0x0004 - -#define MIIM_PHYIR1 0x2 -#define MIIM_PHYIR2 0x3 - -#define MIIM_ANAR 0x4 -#define MIIM_ANAR_INIT 0x1e1 - -#define MIIM_TBI_ANLPBPA 0x5 -#define MIIM_TBI_ANLPBPA_HALF 0x00000040 -#define MIIM_TBI_ANLPBPA_FULL 0x00000020 - -#define MIIM_TBI_ANEX 0x6 -#define MIIM_TBI_ANEX_NP 0x00000004 -#define MIIM_TBI_ANEX_PRX 0x00000002 - -#define MIIM_GBIT_CONTROL 0x9 -#define MIIM_GBIT_CONTROL_INIT 0xe00 - -#define MIIM_EXT_PAGE_ACCESS 0x1f - -/* Broadcom BCM54xx -- taken from linux sungem_phy */ -#define MIIM_BCM54xx_AUXCNTL 0x18 -#define MIIM_BCM54xx_AUXCNTL_ENCODE(val) ((val & 0x7) << 12)|(val & 0x7) -#define MIIM_BCM54xx_AUXSTATUS 0x19 -#define MIIM_BCM54xx_AUXSTATUS_LINKMODE_MASK 0x0700 -#define MIIM_BCM54xx_AUXSTATUS_LINKMODE_SHIFT 8 - -#define MIIM_BCM54XX_SHD 0x1c /* 0x1c shadow registers */ -#define MIIM_BCM54XX_SHD_WRITE 0x8000 -#define MIIM_BCM54XX_SHD_VAL(x) ((x & 0x1f) << 10) -#define MIIM_BCM54XX_SHD_DATA(x) ((x & 0x3ff) << 0) -#define MIIM_BCM54XX_SHD_WR_ENCODE(val, data) \ - (MIIM_BCM54XX_SHD_WRITE | MIIM_BCM54XX_SHD_VAL(val) | \ - MIIM_BCM54XX_SHD_DATA(data)) - -#define MIIM_BCM54XX_EXP_DATA 0x15 /* Expansion register data */ -#define MIIM_BCM54XX_EXP_SEL 0x17 /* Expansion register select */ -#define MIIM_BCM54XX_EXP_SEL_SSD 0x0e00 /* Secondary SerDes select */ -#define MIIM_BCM54XX_EXP_SEL_ER 0x0f00 /* Expansion register select */ - -/* Cicada Auxiliary Control/Status Register */ -#define MIIM_CIS8201_AUX_CONSTAT 0x1c -#define MIIM_CIS8201_AUXCONSTAT_INIT 0x0004 -#define MIIM_CIS8201_AUXCONSTAT_DUPLEX 0x0020 -#define MIIM_CIS8201_AUXCONSTAT_SPEED 0x0018 -#define MIIM_CIS8201_AUXCONSTAT_GBIT 0x0010 -#define MIIM_CIS8201_AUXCONSTAT_100 0x0008 - -/* Cicada Extended Control Register 1 */ -#define MIIM_CIS8201_EXT_CON1 0x17 -#define MIIM_CIS8201_EXTCON1_INIT 0x0000 - -/* Cicada 8204 Extended PHY Control Register 1 */ -#define MIIM_CIS8204_EPHY_CON 0x17 -#define MIIM_CIS8204_EPHYCON_INIT 0x0006 -#define MIIM_CIS8204_EPHYCON_RGMII 0x1100 - -/* Cicada 8204 Serial LED Control Register */ -#define MIIM_CIS8204_SLED_CON 0x1b -#define MIIM_CIS8204_SLEDCON_INIT 0x1115 - -#define MIIM_GBIT_CON 0x09 -#define MIIM_GBIT_CON_ADVERT 0x0e00 - -/* Entry for Vitesse VSC8244 regs starts here */ -/* Vitesse VSC8244 Auxiliary Control/Status Register */ -#define MIIM_VSC8244_AUX_CONSTAT 0x1c -#define MIIM_VSC8244_AUXCONSTAT_INIT 0x0000 -#define MIIM_VSC8244_AUXCONSTAT_DUPLEX 0x0020 -#define MIIM_VSC8244_AUXCONSTAT_SPEED 0x0018 -#define MIIM_VSC8244_AUXCONSTAT_GBIT 0x0010 -#define MIIM_VSC8244_AUXCONSTAT_100 0x0008 -#define MIIM_CONTROL_INIT_LOOPBACK 0x4000 - -/* Vitesse VSC8244 Extended PHY Control Register 1 */ -#define MIIM_VSC8244_EPHY_CON 0x17 -#define MIIM_VSC8244_EPHYCON_INIT 0x0006 - -/* Vitesse VSC8244 Serial LED Control Register */ -#define MIIM_VSC8244_LED_CON 0x1b -#define MIIM_VSC8244_LEDCON_INIT 0xF011 - -/* Entry for Vitesse VSC8601 regs starts here (Not complete) */ -/* Vitesse VSC8601 Extended PHY Control Register 1 */ -#define MIIM_VSC8601_EPHY_CON 0x17 -#define MIIM_VSC8601_EPHY_CON_INIT_SKEW 0x1120 -#define MIIM_VSC8601_SKEW_CTRL 0x1c - -/* 88E1011 PHY Status Register */ -#define MIIM_88E1011_PHY_STATUS 0x11 -#define MIIM_88E1011_PHYSTAT_SPEED 0xc000 -#define MIIM_88E1011_PHYSTAT_GBIT 0x8000 -#define MIIM_88E1011_PHYSTAT_100 0x4000 -#define MIIM_88E1011_PHYSTAT_DUPLEX 0x2000 -#define MIIM_88E1011_PHYSTAT_SPDDONE 0x0800 -#define MIIM_88E1011_PHYSTAT_LINK 0x0400 - -#define MIIM_88E1011_PHY_SCR 0x10 -#define MIIM_88E1011_PHY_MDI_X_AUTO 0x0060 - -/* 88E1111 PHY LED Control Register */ -#define MIIM_88E1111_PHY_LED_CONTROL 24 -#define MIIM_88E1111_PHY_LED_DIRECT 0x4100 -#define MIIM_88E1111_PHY_LED_COMBINE 0x411C - -/* 88E1121 PHY LED Control Register */ -#define MIIM_88E1121_PHY_LED_CTRL 16 -#define MIIM_88E1121_PHY_LED_PAGE 3 -#define MIIM_88E1121_PHY_LED_DEF 0x0030 - -/* 88E1121 PHY IRQ Enable/Status Register */ -#define MIIM_88E1121_PHY_IRQ_EN 18 -#define MIIM_88E1121_PHY_IRQ_STATUS 19 - -#define MIIM_88E1121_PHY_PAGE 22 - -/* 88E1145 Extended PHY Specific Control Register */ -#define MIIM_88E1145_PHY_EXT_CR 20 -#define MIIM_M88E1145_RGMII_RX_DELAY 0x0080 -#define MIIM_M88E1145_RGMII_TX_DELAY 0x0002 - -#define MIIM_88E1145_PHY_PAGE 29 -#define MIIM_88E1145_PHY_CAL_OV 30 - -/* RTL8211B PHY Status Register */ -#define MIIM_RTL8211B_PHY_STATUS 0x11 -#define MIIM_RTL8211B_PHYSTAT_SPEED 0xc000 -#define MIIM_RTL8211B_PHYSTAT_GBIT 0x8000 -#define MIIM_RTL8211B_PHYSTAT_100 0x4000 -#define MIIM_RTL8211B_PHYSTAT_DUPLEX 0x2000 -#define MIIM_RTL8211B_PHYSTAT_SPDDONE 0x0800 -#define MIIM_RTL8211B_PHYSTAT_LINK 0x0400 - -/* DM9161 Control register values */ -#define MIIM_DM9161_CR_STOP 0x0400 -#define MIIM_DM9161_CR_RSTAN 0x1200 - -#define MIIM_DM9161_SCR 0x10 -#define MIIM_DM9161_SCR_INIT 0x0610 - -/* DM9161 Specified Configuration and Status Register */ -#define MIIM_DM9161_SCSR 0x11 -#define MIIM_DM9161_SCSR_100F 0x8000 -#define MIIM_DM9161_SCSR_100H 0x4000 -#define MIIM_DM9161_SCSR_10F 0x2000 -#define MIIM_DM9161_SCSR_10H 0x1000 - -/* DM9161 10BT Configuration/Status */ -#define MIIM_DM9161_10BTCSR 0x12 -#define MIIM_DM9161_10BTCSR_INIT 0x7800 - -/* LXT971 Status 2 registers */ -#define MIIM_LXT971_SR2 0x11 /* Status Register 2 */ -#define MIIM_LXT971_SR2_SPEED_MASK 0x4200 -#define MIIM_LXT971_SR2_10HDX 0x0000 /* 10 Mbit half duplex selected */ -#define MIIM_LXT971_SR2_10FDX 0x0200 /* 10 Mbit full duplex selected */ -#define MIIM_LXT971_SR2_100HDX 0x4000 /* 100 Mbit half duplex selected */ -#define MIIM_LXT971_SR2_100FDX 0x4200 /* 100 Mbit full duplex selected */ - -/* DP83865 Control register values */ -#define MIIM_DP83865_CR_INIT 0x9200 - -/* DP83865 Link and Auto-Neg Status Register */ -#define MIIM_DP83865_LANR 0x11 -#define MIIM_DP83865_SPD_MASK 0x0018 -#define MIIM_DP83865_SPD_1000 0x0010 -#define MIIM_DP83865_SPD_100 0x0008 -#define MIIM_DP83865_DPX_FULL 0x0002 - -#define MIIM_READ_COMMAND 0x00000001 #define MRBLR_INIT_SETTINGS PKTSIZE_ALIGN @@ -467,22 +281,6 @@ typedef struct tsec_hash_regs uint res2[24]; } tsec_hash_t; -typedef struct tsec_mdio { - uint res1[4]; - uint ieventm; - uint imaskm; - uint res2; - uint emapm; - uint res3[320]; - uint miimcfg; /* MII Management: Configuration */ - uint miimcom; /* MII Management: Command */ - uint miimadd; /* MII Management: Address */ - uint miimcon; /* MII Management: Control */ - uint miimstat; /* MII Management: Status */ - uint miimind; /* MII Management: Indicators */ - uint res4[690]; -} tsec_mdio_t; - typedef struct tsec { /* General Control and Status Registers (0x2_n000) */ @@ -578,79 +376,29 @@ typedef struct tsec uint resc00[256]; } tsec_t; -#define TSEC_GIGABIT (1) +#define TSEC_GIGABIT (1 << 0) -/* This flag currently only has - * meaning if we're using the eTSEC */ +/* These flags currently only have meaning if we're using the eTSEC */ #define TSEC_REDUCED (1 << 1) /* MAC-PHY interface uses RGMII */ #define TSEC_SGMII (1 << 2) /* MAC-PHY interface uses SGMII */ -#define TSEC_FIBER (1 << 3) /* PHY uses fiber, eg 1000 Base-X */ struct tsec_private { - volatile tsec_t *regs; - volatile tsec_mdio_t *phyregs; - volatile tsec_mdio_t *phyregs_sgmii; - struct phy_info *phyinfo; + tsec_t *regs; + struct tsec_mii_mng *phyregs_sgmii; + struct phy_device *phydev; + phy_interface_t interface; + struct mii_dev *bus; uint phyaddr; + char mii_devname[16]; u32 flags; - uint link; - uint duplexity; - uint speed; -}; - - -/* - * struct phy_cmd: A command for reading or writing a PHY register - * - * mii_reg: The register to read or write - * - * mii_data: For writes, the value to put in the register. - * A value of -1 indicates this is a read. - * - * funct: A function pointer which is invoked for each command. - * For reads, this function will be passed the value read - * from the PHY, and process it. - * For writes, the result of this function will be written - * to the PHY register - */ -struct phy_cmd { - uint mii_reg; - uint mii_data; - uint (*funct) (uint mii_reg, struct tsec_private * priv); -}; - -/* struct phy_info: a structure which defines attributes for a PHY - * - * id will contain a number which represents the PHY. During - * startup, the driver will poll the PHY to find out what its - * UID--as defined by registers 2 and 3--is. The 32-bit result - * gotten from the PHY will be shifted right by "shift" bits to - * discard any bits which may change based on revision numbers - * unimportant to functionality - * - * The struct phy_cmd entries represent pointers to an arrays of - * commands which tell the driver what to do to the PHY. - */ -struct phy_info { - uint id; - char *name; - uint shift; - /* Called to configure the PHY, and modify the controller - * based on the results */ - struct phy_cmd *config; - - /* Called when starting up the controller */ - struct phy_cmd *startup; - - /* Called when bringing down the controller */ - struct phy_cmd *shutdown; }; struct tsec_info_struct { tsec_t *regs; - tsec_mdio_t *miiregs; - tsec_mdio_t *miiregs_sgmii; + struct tsec_mii_mng *miiregs_sgmii; char *devname; + char *mii_devname; + phy_interface_t interface; unsigned int phyaddr; u32 flags; }; diff --git a/lib/Makefile b/lib/Makefile index fcfe351..afa6914 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -52,7 +52,6 @@ COBJS-y += string.o COBJS-y += strmhz.o COBJS-y += time.o COBJS-y += vsprintf.o -COBJS-$(CONFIG_ZLIB) += zlib.o COBJS-$(CONFIG_RBTREE) += rbtree.o COBJS := $(COBJS-y) diff --git a/lib/gunzip.c b/lib/gunzip.c index 482a476..8b16b24 100644 --- a/lib/gunzip.c +++ b/lib/gunzip.c @@ -106,12 +106,16 @@ int zunzip(void *dst, int dstlen, unsigned char *src, unsigned long *lenp, s.avail_in = *lenp - offset; s.next_out = dst; s.avail_out = dstlen; - r = inflate(&s, Z_FINISH); - if ((r != Z_STREAM_END) && (stoponerr==1)) { - printf ("Error: inflate() returned %d\n", r); - inflateEnd(&s); - return (-1); - } + do { + r = inflate(&s, Z_FINISH); + if (r != Z_STREAM_END && r != Z_BUF_ERROR && stoponerr == 1) { + printf("Error: inflate() returned %d\n", r); + inflateEnd(&s); + return -1; + } + s.avail_in = *lenp - offset - (int)(s.next_out - (unsigned char*)dst); + s.avail_out = dstlen; + } while (r == Z_BUF_ERROR); *lenp = s.next_out - (unsigned char *) dst; inflateEnd(&s); diff --git a/lib/hashtable.c b/lib/hashtable.c index fcdb53c..19d5b15 100644 --- a/lib/hashtable.c +++ b/lib/hashtable.c @@ -202,6 +202,29 @@ void hdestroy_r(struct hsearch_data *htab) * example for functions like hdelete(). */ +/* + * hstrstr_r - return index to entry whose key and/or data contains match + */ +int hstrstr_r(const char *match, int last_idx, ENTRY ** retval, + struct hsearch_data *htab) +{ + unsigned int idx; + + for (idx = last_idx + 1; idx < htab->size; ++idx) { + if (htab->table[idx].used <= 0) + continue; + if (strstr(htab->table[idx].entry.key, match) || + strstr(htab->table[idx].entry.data, match)) { + *retval = &htab->table[idx].entry; + return idx; + } + } + + __set_errno(ESRCH); + *retval = NULL; + return 0; +} + int hmatch_r(const char *match, int last_idx, ENTRY ** retval, struct hsearch_data *htab) { @@ -209,7 +232,7 @@ int hmatch_r(const char *match, int last_idx, ENTRY ** retval, size_t key_len = strlen(match); for (idx = last_idx + 1; idx < htab->size; ++idx) { - if (htab->table[idx].used > 0) + if (htab->table[idx].used <= 0) continue; if (!strncmp(match, htab->table[idx].entry.key, key_len)) { *retval = &htab->table[idx].entry; diff --git a/lib/zlib.c b/lib/zlib.c deleted file mode 100644 index e19484a..0000000 --- a/lib/zlib.c +++ /dev/null @@ -1,2218 +0,0 @@ -/* - * This file is derived from various .h and .c files from the zlib-1.2.3 - * distribution by Jean-loup Gailly and Mark Adler, with some additions - * by Paul Mackerras to aid in implementing Deflate compression and - * decompression for PPP packets. See zlib.h for conditions of - * distribution and use. - * - * Changes that have been made include: - * - changed functions not used outside this file to "local" - * - added minCompression parameter to deflateInit2 - * - added Z_PACKET_FLUSH (see zlib.h for details) - * - added inflateIncomp - */ - -/*+++++*/ -/* zutil.h -- internal interface and configuration of the compression library - * Copyright (C) 1995-2005 Jean-loup Gailly. - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* WARNING: this file should *not* be used by applications. It is - part of the implementation of the compression library and is - subject to change. Applications should only use zlib.h. - */ - -#define ZUTIL_H -#define ZLIB_INTERNAL - -#include <common.h> -#include <compiler.h> -#include <asm/unaligned.h> -#include <watchdog.h> -#include "u-boot/zlib.h" -#undef OFF /* avoid conflicts */ - -/* To avoid a build time warning */ -#ifdef STDC -#include <malloc.h> -#endif - -#ifndef local -#define local static -#endif -/* compile with -Dlocal if your debugger can't find static symbols */ - -typedef unsigned char uch; -typedef uch FAR uchf; -typedef unsigned short ush; -typedef ush FAR ushf; -typedef unsigned long ulg; - -#define ERR_MSG(err) z_errmsg[Z_NEED_DICT-(err)] -#define ERR_RETURN(strm,err) return (strm->msg = (char*)ERR_MSG(err), (err)) -/* To be used only when the state is known to be valid */ - -#ifndef NULL -#define NULL ((void *) 0) -#endif - - /* common constants */ - -#ifndef DEF_WBITS -#define DEF_WBITS MAX_WBITS -#endif -/* default windowBits for decompression. MAX_WBITS is for compression only */ - -#if MAX_MEM_LEVEL >= 8 -#define DEF_MEM_LEVEL 8 -#else -#define DEF_MEM_LEVEL MAX_MEM_LEVEL -#endif -/* default memLevel */ - -#define STORED_BLOCK 0 -#define STATIC_TREES 1 -#define DYN_TREES 2 -/* The three kinds of block type */ - -#define MIN_MATCH 3 -#define MAX_MATCH 258 -/* The minimum and maximum match lengths */ - - /* functions */ - -#include <linux/string.h> -#define zmemcpy memcpy -#define zmemcmp memcmp -#define zmemzero(dest, len) memset(dest, 0, len) - -/* Diagnostic functions */ -#ifdef DEBUG - extern int z_verbose; - extern void z_error OF((char *m)); -#define Assert(cond,msg) {if(!(cond)) z_error(msg);} -#define fprintf(fp,...) printf(__VA_ARGS__) -#define Trace(x) {if (z_verbose>=0) fprintf x ;} -#define Tracev(x) {if (z_verbose>0) fprintf x ;} -#define Tracevv(x) {if (z_verbose>1) fprintf x ;} -#define Tracec(c,x) {if (z_verbose>0 && (c)) fprintf x ;} -#define Tracecv(c,x) {if (z_verbose>1 && (c)) fprintf x ;} -#else -#define Assert(cond,msg) -#define Trace(x) -#define Tracev(x) -#define Tracevv(x) -#define Tracec(c,x) -#define Tracecv(c,x) -#endif - -voidpf zcalloc OF((voidpf opaque, unsigned items, unsigned size)); -void zcfree OF((voidpf opaque, voidpf ptr, unsigned size)); - -#define ZALLOC(strm, items, size) \ - (*((strm)->zalloc))((strm)->opaque, (items), (size)) -#define ZFREE(strm, addr) (*((strm)->zfree))((strm)->opaque, (voidpf)(addr), 0) - -/*+++++*/ -/* inftrees.h -- header to use inftrees.c - * Copyright (C) 1995-2005 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* WARNING: this file should *not* be used by applications. It is - part of the implementation of the compression library and is - subject to change. Applications should only use zlib.h. - */ - -/* Structure for decoding tables. Each entry provides either the - information needed to do the operation requested by the code that - indexed that table entry, or it provides a pointer to another - table that indexes more bits of the code. op indicates whether - the entry is a pointer to another table, a literal, a length or - distance, an end-of-block, or an invalid code. For a table - pointer, the low four bits of op is the number of index bits of - that table. For a length or distance, the low four bits of op - is the number of extra bits to get after the code. bits is - the number of bits in this code or part of the code to drop off - of the bit buffer. val is the actual byte to output in the case - of a literal, the base length or distance, or the offset from - the current table to the next table. Each entry is four bytes. */ - -typedef struct { - unsigned char op; /* operation, extra bits, table bits */ - unsigned char bits; /* bits in this part of the code */ - unsigned short val; /* offset in table or code value */ -} code; - -/* Maximum size of dynamic tree. The maximum found in a long but non- - exhaustive search was 1444 code structures (852 for length/literals - and 592 for distances, the latter actually the result of an - exhaustive search). The true maximum is not known, but the value - below is more than safe. */ -#define ENOUGH 2048 -#define MAXD 592 - -/* Type of code to build for inftable() */ -typedef enum { - CODES, - LENS, - DISTS -} codetype; - -extern int inflate_table OF((codetype type, unsigned short FAR *lens, - unsigned codes, code FAR * FAR *table, - unsigned FAR *bits, unsigned short FAR *work)); -/*+++++*/ -/* inflate.h -- internal inflate state definition - * Copyright (C) 1995-2004 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* WARNING: this file should *not* be used by applications. It is - part of the implementation of the compression library and is - subject to change. Applications should only use zlib.h. - */ - -#define GUNZIP - -/* Possible inflate modes between inflate() calls */ -typedef enum { - HEAD, /* i: waiting for magic header */ - FLAGS, /* i: waiting for method and flags (gzip) */ - TIME, /* i: waiting for modification time (gzip) */ - OS, /* i: waiting for extra flags and operating system (gzip) */ - EXLEN, /* i: waiting for extra length (gzip) */ - EXTRA, /* i: waiting for extra bytes (gzip) */ - NAME, /* i: waiting for end of file name (gzip) */ - COMMENT, /* i: waiting for end of comment (gzip) */ - HCRC, /* i: waiting for header crc (gzip) */ - DICTID, /* i: waiting for dictionary check value */ - DICT, /* waiting for inflateSetDictionary() call */ - TYPE, /* i: waiting for type bits, including last-flag bit */ - TYPEDO, /* i: same, but skip check to exit inflate on new block */ - STORED, /* i: waiting for stored size (length and complement) */ - COPY, /* i/o: waiting for input or output to copy stored block */ - TABLE, /* i: waiting for dynamic block table lengths */ - LENLENS, /* i: waiting for code length code lengths */ - CODELENS, /* i: waiting for length/lit and distance code lengths */ - LEN, /* i: waiting for length/lit code */ - LENEXT, /* i: waiting for length extra bits */ - DIST, /* i: waiting for distance code */ - DISTEXT, /* i: waiting for distance extra bits */ - MATCH, /* o: waiting for output space to copy string */ - LIT, /* o: waiting for output space to write literal */ - CHECK, /* i: waiting for 32-bit check value */ - LENGTH, /* i: waiting for 32-bit length (gzip) */ - DONE, /* finished check, done -- remain here until reset */ - BAD, /* got a data error -- remain here until reset */ - MEM, /* got an inflate() memory error -- remain here until reset */ - SYNC, /* looking for synchronization bytes to restart inflate() */ - START, - WASH, - END, - BADCODE -} inflate_mode; - -/* - State transitions between above modes - - - (most modes can go to the BAD or MEM mode -- not shown for clarity) - - Process header: - HEAD -> (gzip) or (zlib) - (gzip) -> FLAGS -> TIME -> OS -> EXLEN -> EXTRA -> NAME - NAME -> COMMENT -> HCRC -> TYPE - (zlib) -> DICTID or TYPE - DICTID -> DICT -> TYPE - Read deflate blocks: - TYPE -> STORED or TABLE or LEN or CHECK - STORED -> COPY -> TYPE - TABLE -> LENLENS -> CODELENS -> LEN - Read deflate codes: - LEN -> LENEXT or LIT or TYPE - LENEXT -> DIST -> DISTEXT -> MATCH -> LEN - LIT -> LEN - Process trailer: - CHECK -> LENGTH -> DONE - */ - -/* state maintained between inflate() calls. Approximately 7K bytes. */ -struct inflate_state { - inflate_mode mode; /* current inflate mode */ - int last; /* true if processing last block */ - int wrap; /* bit 0 true for zlib, bit 1 true for gzip */ - int havedict; /* true if dictionary provided */ - int flags; /* gzip header method and flags (0 if zlib) */ - unsigned dmax; /* zlib header max distance (INFLATE_STRICT) */ - unsigned long check; /* protected copy of check value */ - unsigned long total; /* protected copy of output count */ - gz_headerp head; /* where to save gzip header information */ - /* sliding window */ - unsigned wbits; /* log base 2 of requested window size */ - unsigned wsize; /* window size or zero if not using window */ - unsigned whave; /* valid bytes in the window */ - unsigned write; /* window write index */ - unsigned char FAR *window; /* allocated sliding window, if needed */ - /* bit accumulator */ - unsigned long hold; /* input bit accumulator */ - unsigned bits; /* number of bits in "in" */ - /* for string and stored block copying */ - unsigned length; /* literal or length of data to copy */ - unsigned offset; /* distance back to copy string from */ - /* for table and code decoding */ - unsigned extra; /* extra bits needed */ - /* fixed and dynamic code tables */ - code const FAR *lencode; /* starting table for length/literal codes */ - code const FAR *distcode; /* starting table for distance codes */ - unsigned lenbits; /* index bits for lencode */ - unsigned distbits; /* index bits for distcode */ - /* dynamic table building */ - unsigned ncode; /* number of code length code lengths */ - unsigned nlen; /* number of length code lengths */ - unsigned ndist; /* number of distance code lengths */ - unsigned have; /* number of code lengths in lens[] */ - code FAR *next; /* next available space in codes[] */ - unsigned short lens[320]; /* temporary storage for code lengths */ - unsigned short work[288]; /* work area for code table building */ - code codes[ENOUGH]; /* space for code tables */ -}; - -/*+++++*/ -/* inffast.h -- header to use inffast.c - * Copyright (C) 1995-2003 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* WARNING: this file should *not* be used by applications. It is - part of the implementation of the compression library and is - subject to change. Applications should only use zlib.h. - */ - -void inflate_fast OF((z_streamp strm, unsigned start)); -/*+++++*/ - /* inffixed.h -- table for decoding fixed codes - * Generated automatically by makefixed(). - */ - - /* WARNING: this file should *not* be used by applications. It - is part of the implementation of the compression library and - is subject to change. Applications should only use zlib.h. - */ - - static const code lenfix[512] = { - {96,7,0},{0,8,80},{0,8,16},{20,8,115},{18,7,31},{0,8,112},{0,8,48}, - {0,9,192},{16,7,10},{0,8,96},{0,8,32},{0,9,160},{0,8,0},{0,8,128}, - {0,8,64},{0,9,224},{16,7,6},{0,8,88},{0,8,24},{0,9,144},{19,7,59}, - {0,8,120},{0,8,56},{0,9,208},{17,7,17},{0,8,104},{0,8,40},{0,9,176}, - {0,8,8},{0,8,136},{0,8,72},{0,9,240},{16,7,4},{0,8,84},{0,8,20}, - {21,8,227},{19,7,43},{0,8,116},{0,8,52},{0,9,200},{17,7,13},{0,8,100}, - {0,8,36},{0,9,168},{0,8,4},{0,8,132},{0,8,68},{0,9,232},{16,7,8}, - {0,8,92},{0,8,28},{0,9,152},{20,7,83},{0,8,124},{0,8,60},{0,9,216}, - {18,7,23},{0,8,108},{0,8,44},{0,9,184},{0,8,12},{0,8,140},{0,8,76}, - {0,9,248},{16,7,3},{0,8,82},{0,8,18},{21,8,163},{19,7,35},{0,8,114}, - {0,8,50},{0,9,196},{17,7,11},{0,8,98},{0,8,34},{0,9,164},{0,8,2}, - {0,8,130},{0,8,66},{0,9,228},{16,7,7},{0,8,90},{0,8,26},{0,9,148}, - {20,7,67},{0,8,122},{0,8,58},{0,9,212},{18,7,19},{0,8,106},{0,8,42}, - {0,9,180},{0,8,10},{0,8,138},{0,8,74},{0,9,244},{16,7,5},{0,8,86}, - {0,8,22},{64,8,0},{19,7,51},{0,8,118},{0,8,54},{0,9,204},{17,7,15}, - {0,8,102},{0,8,38},{0,9,172},{0,8,6},{0,8,134},{0,8,70},{0,9,236}, - {16,7,9},{0,8,94},{0,8,30},{0,9,156},{20,7,99},{0,8,126},{0,8,62}, - {0,9,220},{18,7,27},{0,8,110},{0,8,46},{0,9,188},{0,8,14},{0,8,142}, - {0,8,78},{0,9,252},{96,7,0},{0,8,81},{0,8,17},{21,8,131},{18,7,31}, - {0,8,113},{0,8,49},{0,9,194},{16,7,10},{0,8,97},{0,8,33},{0,9,162}, - {0,8,1},{0,8,129},{0,8,65},{0,9,226},{16,7,6},{0,8,89},{0,8,25}, - {0,9,146},{19,7,59},{0,8,121},{0,8,57},{0,9,210},{17,7,17},{0,8,105}, - {0,8,41},{0,9,178},{0,8,9},{0,8,137},{0,8,73},{0,9,242},{16,7,4}, - {0,8,85},{0,8,21},{16,8,258},{19,7,43},{0,8,117},{0,8,53},{0,9,202}, - {17,7,13},{0,8,101},{0,8,37},{0,9,170},{0,8,5},{0,8,133},{0,8,69}, - {0,9,234},{16,7,8},{0,8,93},{0,8,29},{0,9,154},{20,7,83},{0,8,125}, - {0,8,61},{0,9,218},{18,7,23},{0,8,109},{0,8,45},{0,9,186},{0,8,13}, - {0,8,141},{0,8,77},{0,9,250},{16,7,3},{0,8,83},{0,8,19},{21,8,195}, - {19,7,35},{0,8,115},{0,8,51},{0,9,198},{17,7,11},{0,8,99},{0,8,35}, - {0,9,166},{0,8,3},{0,8,131},{0,8,67},{0,9,230},{16,7,7},{0,8,91}, - {0,8,27},{0,9,150},{20,7,67},{0,8,123},{0,8,59},{0,9,214},{18,7,19}, - {0,8,107},{0,8,43},{0,9,182},{0,8,11},{0,8,139},{0,8,75},{0,9,246}, - {16,7,5},{0,8,87},{0,8,23},{64,8,0},{19,7,51},{0,8,119},{0,8,55}, - {0,9,206},{17,7,15},{0,8,103},{0,8,39},{0,9,174},{0,8,7},{0,8,135}, - {0,8,71},{0,9,238},{16,7,9},{0,8,95},{0,8,31},{0,9,158},{20,7,99}, - {0,8,127},{0,8,63},{0,9,222},{18,7,27},{0,8,111},{0,8,47},{0,9,190}, - {0,8,15},{0,8,143},{0,8,79},{0,9,254},{96,7,0},{0,8,80},{0,8,16}, - {20,8,115},{18,7,31},{0,8,112},{0,8,48},{0,9,193},{16,7,10},{0,8,96}, - {0,8,32},{0,9,161},{0,8,0},{0,8,128},{0,8,64},{0,9,225},{16,7,6}, - {0,8,88},{0,8,24},{0,9,145},{19,7,59},{0,8,120},{0,8,56},{0,9,209}, - {17,7,17},{0,8,104},{0,8,40},{0,9,177},{0,8,8},{0,8,136},{0,8,72}, - {0,9,241},{16,7,4},{0,8,84},{0,8,20},{21,8,227},{19,7,43},{0,8,116}, - {0,8,52},{0,9,201},{17,7,13},{0,8,100},{0,8,36},{0,9,169},{0,8,4}, - {0,8,132},{0,8,68},{0,9,233},{16,7,8},{0,8,92},{0,8,28},{0,9,153}, - {20,7,83},{0,8,124},{0,8,60},{0,9,217},{18,7,23},{0,8,108},{0,8,44}, - {0,9,185},{0,8,12},{0,8,140},{0,8,76},{0,9,249},{16,7,3},{0,8,82}, - {0,8,18},{21,8,163},{19,7,35},{0,8,114},{0,8,50},{0,9,197},{17,7,11}, - {0,8,98},{0,8,34},{0,9,165},{0,8,2},{0,8,130},{0,8,66},{0,9,229}, - {16,7,7},{0,8,90},{0,8,26},{0,9,149},{20,7,67},{0,8,122},{0,8,58}, - {0,9,213},{18,7,19},{0,8,106},{0,8,42},{0,9,181},{0,8,10},{0,8,138}, - {0,8,74},{0,9,245},{16,7,5},{0,8,86},{0,8,22},{64,8,0},{19,7,51}, - {0,8,118},{0,8,54},{0,9,205},{17,7,15},{0,8,102},{0,8,38},{0,9,173}, - {0,8,6},{0,8,134},{0,8,70},{0,9,237},{16,7,9},{0,8,94},{0,8,30}, - {0,9,157},{20,7,99},{0,8,126},{0,8,62},{0,9,221},{18,7,27},{0,8,110}, - {0,8,46},{0,9,189},{0,8,14},{0,8,142},{0,8,78},{0,9,253},{96,7,0}, - {0,8,81},{0,8,17},{21,8,131},{18,7,31},{0,8,113},{0,8,49},{0,9,195}, - {16,7,10},{0,8,97},{0,8,33},{0,9,163},{0,8,1},{0,8,129},{0,8,65}, - {0,9,227},{16,7,6},{0,8,89},{0,8,25},{0,9,147},{19,7,59},{0,8,121}, - {0,8,57},{0,9,211},{17,7,17},{0,8,105},{0,8,41},{0,9,179},{0,8,9}, - {0,8,137},{0,8,73},{0,9,243},{16,7,4},{0,8,85},{0,8,21},{16,8,258}, - {19,7,43},{0,8,117},{0,8,53},{0,9,203},{17,7,13},{0,8,101},{0,8,37}, - {0,9,171},{0,8,5},{0,8,133},{0,8,69},{0,9,235},{16,7,8},{0,8,93}, - {0,8,29},{0,9,155},{20,7,83},{0,8,125},{0,8,61},{0,9,219},{18,7,23}, - {0,8,109},{0,8,45},{0,9,187},{0,8,13},{0,8,141},{0,8,77},{0,9,251}, - {16,7,3},{0,8,83},{0,8,19},{21,8,195},{19,7,35},{0,8,115},{0,8,51}, - {0,9,199},{17,7,11},{0,8,99},{0,8,35},{0,9,167},{0,8,3},{0,8,131}, - {0,8,67},{0,9,231},{16,7,7},{0,8,91},{0,8,27},{0,9,151},{20,7,67}, - {0,8,123},{0,8,59},{0,9,215},{18,7,19},{0,8,107},{0,8,43},{0,9,183}, - {0,8,11},{0,8,139},{0,8,75},{0,9,247},{16,7,5},{0,8,87},{0,8,23}, - {64,8,0},{19,7,51},{0,8,119},{0,8,55},{0,9,207},{17,7,15},{0,8,103}, - {0,8,39},{0,9,175},{0,8,7},{0,8,135},{0,8,71},{0,9,239},{16,7,9}, - {0,8,95},{0,8,31},{0,9,159},{20,7,99},{0,8,127},{0,8,63},{0,9,223}, - {18,7,27},{0,8,111},{0,8,47},{0,9,191},{0,8,15},{0,8,143},{0,8,79}, - {0,9,255} - }; - - static const code distfix[32] = { - {16,5,1},{23,5,257},{19,5,17},{27,5,4097},{17,5,5},{25,5,1025}, - {21,5,65},{29,5,16385},{16,5,3},{24,5,513},{20,5,33},{28,5,8193}, - {18,5,9},{26,5,2049},{22,5,129},{64,5,0},{16,5,2},{23,5,385}, - {19,5,25},{27,5,6145},{17,5,7},{25,5,1537},{21,5,97},{29,5,24577}, - {16,5,4},{24,5,769},{20,5,49},{28,5,12289},{18,5,13},{26,5,3073}, - {22,5,193},{64,5,0} - }; - -/*+++++*/ -/* inffast.c -- fast decoding - * Copyright (C) 1995-2004 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* Allow machine dependent optimization for post-increment or pre-increment. - Based on testing to date, - Pre-increment preferred for: - - PowerPC G3 (Adler) - - MIPS R5000 (Randers-Pehrson) - Post-increment preferred for: - - none - No measurable difference: - - Pentium III (Anderson) - - M68060 (Nikl) - */ -#define OFF 1 -#define PUP(a) *++(a) -#define UP_UNALIGNED(a) get_unaligned(++(a)) - -/* - Decode literal, length, and distance codes and write out the resulting - literal and match bytes until either not enough input or output is - available, an end-of-block is encountered, or a data error is encountered. - When large enough input and output buffers are supplied to inflate(), for - example, a 16K input buffer and a 64K output buffer, more than 95% of the - inflate execution time is spent in this routine. - - Entry assumptions: - - state->mode == LEN - strm->avail_in >= 6 - strm->avail_out >= 258 - start >= strm->avail_out - state->bits < 8 - - On return, state->mode is one of: - - LEN -- ran out of enough output space or enough available input - TYPE -- reached end of block code, inflate() to interpret next block - BAD -- error in block data - - Notes: - - - The maximum input bits used by a length/distance pair is 15 bits for the - length code, 5 bits for the length extra, 15 bits for the distance code, - and 13 bits for the distance extra. This totals 48 bits, or six bytes. - Therefore if strm->avail_in >= 6, then there is enough input to avoid - checking for available input while decoding. - - - The maximum bytes that a single length/distance pair can output is 258 - bytes, which is the maximum length that can be coded. inflate_fast() - requires strm->avail_out >= 258 for each loop to avoid checking for - output space. - */ -void inflate_fast(strm, start) -z_streamp strm; -unsigned start; /* inflate()'s starting value for strm->avail_out */ -{ - struct inflate_state FAR *state; - unsigned char FAR *in; /* local strm->next_in */ - unsigned char FAR *last; /* while in < last, enough input available */ - unsigned char FAR *out; /* local strm->next_out */ - unsigned char FAR *beg; /* inflate()'s initial strm->next_out */ - unsigned char FAR *end; /* while out < end, enough space available */ -#ifdef INFLATE_STRICT - unsigned dmax; /* maximum distance from zlib header */ -#endif - unsigned wsize; /* window size or zero if not using window */ - unsigned whave; /* valid bytes in the window */ - unsigned write; /* window write index */ - unsigned char FAR *window; /* allocated sliding window, if wsize != 0 */ - unsigned long hold; /* local strm->hold */ - unsigned bits; /* local strm->bits */ - code const FAR *lcode; /* local strm->lencode */ - code const FAR *dcode; /* local strm->distcode */ - unsigned lmask; /* mask for first level of length codes */ - unsigned dmask; /* mask for first level of distance codes */ - code this; /* retrieved table entry */ - unsigned op; /* code bits, operation, extra bits, or */ - /* window position, window bytes to copy */ - unsigned len; /* match length, unused bytes */ - unsigned dist; /* match distance */ - unsigned char FAR *from; /* where to copy match from */ - - /* copy state to local variables */ - state = (struct inflate_state FAR *)strm->state; - in = strm->next_in - OFF; - last = in + (strm->avail_in - 5); - out = strm->next_out - OFF; - beg = out - (start - strm->avail_out); - end = out + (strm->avail_out - 257); -#ifdef INFLATE_STRICT - dmax = state->dmax; -#endif - wsize = state->wsize; - whave = state->whave; - write = state->write; - window = state->window; - hold = state->hold; - bits = state->bits; - lcode = state->lencode; - dcode = state->distcode; - lmask = (1U << state->lenbits) - 1; - dmask = (1U << state->distbits) - 1; - - /* decode literals and length/distances until end-of-block or not enough - input data or output space */ - do { - if (bits < 15) { - hold += (unsigned long)(PUP(in)) << bits; - bits += 8; - hold += (unsigned long)(PUP(in)) << bits; - bits += 8; - } - this = lcode[hold & lmask]; - dolen: - op = (unsigned)(this.bits); - hold >>= op; - bits -= op; - op = (unsigned)(this.op); - if (op == 0) { /* literal */ - Tracevv((stderr, this.val >= 0x20 && this.val < 0x7f ? - "inflate: literal '%c'\n" : - "inflate: literal 0x%02x\n", this.val)); - PUP(out) = (unsigned char)(this.val); - } - else if (op & 16) { /* length base */ - len = (unsigned)(this.val); - op &= 15; /* number of extra bits */ - if (op) { - if (bits < op) { - hold += (unsigned long)(PUP(in)) << bits; - bits += 8; - } - len += (unsigned)hold & ((1U << op) - 1); - hold >>= op; - bits -= op; - } - Tracevv((stderr, "inflate: length %u\n", len)); - if (bits < 15) { - hold += (unsigned long)(PUP(in)) << bits; - bits += 8; - hold += (unsigned long)(PUP(in)) << bits; - bits += 8; - } - this = dcode[hold & dmask]; - dodist: - op = (unsigned)(this.bits); - hold >>= op; - bits -= op; - op = (unsigned)(this.op); - if (op & 16) { /* distance base */ - dist = (unsigned)(this.val); - op &= 15; /* number of extra bits */ - if (bits < op) { - hold += (unsigned long)(PUP(in)) << bits; - bits += 8; - if (bits < op) { - hold += (unsigned long)(PUP(in)) << bits; - bits += 8; - } - } - dist += (unsigned)hold & ((1U << op) - 1); -#ifdef INFLATE_STRICT - if (dist > dmax) { - strm->msg = (char *)"invalid distance too far back"; - state->mode = BAD; - break; - } -#endif - hold >>= op; - bits -= op; - Tracevv((stderr, "inflate: distance %u\n", dist)); - op = (unsigned)(out - beg); /* max distance in output */ - if (dist > op) { /* see if copy from window */ - op = dist - op; /* distance back in window */ - if (op > whave) { - strm->msg = (char *)"invalid distance too far back"; - state->mode = BAD; - break; - } - from = window - OFF; - if (write == 0) { /* very common case */ - from += wsize - op; - if (op < len) { /* some from window */ - len -= op; - do { - PUP(out) = PUP(from); - } while (--op); - from = out - dist; /* rest from output */ - } - } - else if (write < op) { /* wrap around window */ - from += wsize + write - op; - op -= write; - if (op < len) { /* some from end of window */ - len -= op; - do { - PUP(out) = PUP(from); - } while (--op); - from = window - OFF; - if (write < len) { /* some from start of window */ - op = write; - len -= op; - do { - PUP(out) = PUP(from); - } while (--op); - from = out - dist; /* rest from output */ - } - } - } - else { /* contiguous in window */ - from += write - op; - if (op < len) { /* some from window */ - len -= op; - do { - PUP(out) = PUP(from); - } while (--op); - from = out - dist; /* rest from output */ - } - } - while (len > 2) { - PUP(out) = PUP(from); - PUP(out) = PUP(from); - PUP(out) = PUP(from); - len -= 3; - } - if (len) { - PUP(out) = PUP(from); - if (len > 1) - PUP(out) = PUP(from); - } - } - else { - unsigned short *sout; - unsigned long loops; - - from = out - dist; /* copy direct from output */ - /* minimum length is three */ - /* Align out addr */ - if (!((long)(out - 1 + OFF) & 1)) { - PUP(out) = PUP(from); - len--; - } - sout = (unsigned short *)(out - OFF); - if (dist > 2 ) { - unsigned short *sfrom; - - sfrom = (unsigned short *)(from - OFF); - loops = len >> 1; - do - PUP(sout) = UP_UNALIGNED(sfrom); - while (--loops); - out = (unsigned char *)sout + OFF; - from = (unsigned char *)sfrom + OFF; - } else { /* dist == 1 or dist == 2 */ - unsigned short pat16; - - pat16 = *(sout-2+2*OFF); - if (dist == 1) -#if defined(__BIG_ENDIAN) - pat16 = (pat16 & 0xff) | ((pat16 & 0xff ) << 8); -#elif defined(__LITTLE_ENDIAN) - pat16 = (pat16 & 0xff00) | ((pat16 & 0xff00 ) >> 8); -#else -#error __BIG_ENDIAN nor __LITTLE_ENDIAN is defined -#endif - loops = len >> 1; - do - PUP(sout) = pat16; - while (--loops); - out = (unsigned char *)sout + OFF; - } - if (len & 1) - PUP(out) = PUP(from); - } - } - else if ((op & 64) == 0) { /* 2nd level distance code */ - this = dcode[this.val + (hold & ((1U << op) - 1))]; - goto dodist; - } - else { - strm->msg = (char *)"invalid distance code"; - state->mode = BAD; - break; - } - } - else if ((op & 64) == 0) { /* 2nd level length code */ - this = lcode[this.val + (hold & ((1U << op) - 1))]; - goto dolen; - } - else if (op & 32) { /* end-of-block */ - Tracevv((stderr, "inflate: end of block\n")); - state->mode = TYPE; - break; - } - else { - strm->msg = (char *)"invalid literal/length code"; - state->mode = BAD; - break; - } - } while (in < last && out < end); - - /* return unused bytes (on entry, bits < 8, so in won't go too far back) */ - len = bits >> 3; - in -= len; - bits -= len << 3; - hold &= (1U << bits) - 1; - - /* update state and return */ - strm->next_in = in + OFF; - strm->next_out = out + OFF; - strm->avail_in = (unsigned)(in < last ? 5 + (last - in) : 5 - (in - last)); - strm->avail_out = (unsigned)(out < end ? - 257 + (end - out) : 257 - (out - end)); - state->hold = hold; - state->bits = bits; - return; -} - -/* - inflate_fast() speedups that turned out slower (on a PowerPC G3 750CXe): - - Using bit fields for code structure - - Different op definition to avoid & for extra bits (do & for table bits) - - Three separate decoding do-loops for direct, window, and write == 0 - - Special case for distance > 1 copies to do overlapped load and store copy - - Explicit branch predictions (based on measured branch probabilities) - - Deferring match copy and interspersed it with decoding subsequent codes - - Swapping literal/length else - - Swapping window/direct else - - Larger unrolled copy loops (three is about right) - - Moving len -= 3 statement into middle of loop - */ - -/*+++++*/ -/* inftrees.c -- generate Huffman trees for efficient decoding - * Copyright (C) 1995-2005 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -#define MAXBITS 15 -/* - If you use the zlib library in a product, an acknowledgment is welcome - in the documentation of your product. If for some reason you cannot - include such an acknowledgment, I would appreciate that you keep this - copyright string in the executable of your product. - */ - -/* - Build a set of tables to decode the provided canonical Huffman code. - The code lengths are lens[0..codes-1]. The result starts at *table, - whose indices are 0..2^bits-1. work is a writable array of at least - lens shorts, which is used as a work area. type is the type of code - to be generated, CODES, LENS, or DISTS. On return, zero is success, - -1 is an invalid code, and +1 means that ENOUGH isn't enough. table - on return points to the next available entry's address. bits is the - requested root table index bits, and on return it is the actual root - table index bits. It will differ if the request is greater than the - longest code or if it is less than the shortest code. - */ -int inflate_table(type, lens, codes, table, bits, work) -codetype type; -unsigned short FAR *lens; -unsigned codes; -code FAR * FAR *table; -unsigned FAR *bits; -unsigned short FAR *work; -{ - unsigned len; /* a code's length in bits */ - unsigned sym; /* index of code symbols */ - unsigned min, max; /* minimum and maximum code lengths */ - unsigned root; /* number of index bits for root table */ - unsigned curr; /* number of index bits for current table */ - unsigned drop; /* code bits to drop for sub-table */ - int left; /* number of prefix codes available */ - unsigned used; /* code entries in table used */ - unsigned huff; /* Huffman code */ - unsigned incr; /* for incrementing code, index */ - unsigned fill; /* index for replicating entries */ - unsigned low; /* low bits for current root entry */ - unsigned mask; /* mask for low root bits */ - code this; /* table entry for duplication */ - code FAR *next; /* next available space in table */ - const unsigned short FAR *base; /* base value table to use */ - const unsigned short FAR *extra; /* extra bits table to use */ - int end; /* use base and extra for symbol > end */ - unsigned short count[MAXBITS+1]; /* number of codes of each length */ - unsigned short offs[MAXBITS+1]; /* offsets in table for each length */ - static const unsigned short lbase[31] = { /* Length codes 257..285 base */ - 3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31, - 35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0}; - static const unsigned short lext[31] = { /* Length codes 257..285 extra */ - 16, 16, 16, 16, 16, 16, 16, 16, 17, 17, 17, 17, 18, 18, 18, 18, - 19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 201, 196}; - static const unsigned short dbase[32] = { /* Distance codes 0..29 base */ - 1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193, - 257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145, - 8193, 12289, 16385, 24577, 0, 0}; - static const unsigned short dext[32] = { /* Distance codes 0..29 extra */ - 16, 16, 16, 16, 17, 17, 18, 18, 19, 19, 20, 20, 21, 21, 22, 22, - 23, 23, 24, 24, 25, 25, 26, 26, 27, 27, - 28, 28, 29, 29, 64, 64}; - - /* - Process a set of code lengths to create a canonical Huffman code. The - code lengths are lens[0..codes-1]. Each length corresponds to the - symbols 0..codes-1. The Huffman code is generated by first sorting the - symbols by length from short to long, and retaining the symbol order - for codes with equal lengths. Then the code starts with all zero bits - for the first code of the shortest length, and the codes are integer - increments for the same length, and zeros are appended as the length - increases. For the deflate format, these bits are stored backwards - from their more natural integer increment ordering, and so when the - decoding tables are built in the large loop below, the integer codes - are incremented backwards. - - This routine assumes, but does not check, that all of the entries in - lens[] are in the range 0..MAXBITS. The caller must assure this. - 1..MAXBITS is interpreted as that code length. zero means that that - symbol does not occur in this code. - - The codes are sorted by computing a count of codes for each length, - creating from that a table of starting indices for each length in the - sorted table, and then entering the symbols in order in the sorted - table. The sorted table is work[], with that space being provided by - the caller. - - The length counts are used for other purposes as well, i.e. finding - the minimum and maximum length codes, determining if there are any - codes at all, checking for a valid set of lengths, and looking ahead - at length counts to determine sub-table sizes when building the - decoding tables. - */ - - /* accumulate lengths for codes (assumes lens[] all in 0..MAXBITS) */ - for (len = 0; len <= MAXBITS; len++) - count[len] = 0; - for (sym = 0; sym < codes; sym++) - count[lens[sym]]++; - - /* bound code lengths, force root to be within code lengths */ - root = *bits; - for (max = MAXBITS; max >= 1; max--) - if (count[max] != 0) break; - if (root > max) root = max; - if (max == 0) { /* no symbols to code at all */ - this.op = (unsigned char)64; /* invalid code marker */ - this.bits = (unsigned char)1; - this.val = (unsigned short)0; - *(*table)++ = this; /* make a table to force an error */ - *(*table)++ = this; - *bits = 1; - return 0; /* no symbols, but wait for decoding to report error */ - } - for (min = 1; min <= MAXBITS; min++) - if (count[min] != 0) break; - if (root < min) root = min; - - /* check for an over-subscribed or incomplete set of lengths */ - left = 1; - for (len = 1; len <= MAXBITS; len++) { - left <<= 1; - left -= count[len]; - if (left < 0) return -1; /* over-subscribed */ - } - if (left > 0 && (type == CODES || max != 1)) - return -1; /* incomplete set */ - - /* generate offsets into symbol table for each length for sorting */ - offs[1] = 0; - for (len = 1; len < MAXBITS; len++) - offs[len + 1] = offs[len] + count[len]; - - /* sort symbols by length, by symbol order within each length */ - for (sym = 0; sym < codes; sym++) - if (lens[sym] != 0) work[offs[lens[sym]]++] = (unsigned short)sym; - - /* - Create and fill in decoding tables. In this loop, the table being - filled is at next and has curr index bits. The code being used is huff - with length len. That code is converted to an index by dropping drop - bits off of the bottom. For codes where len is less than drop + curr, - those top drop + curr - len bits are incremented through all values to - fill the table with replicated entries. - - root is the number of index bits for the root table. When len exceeds - root, sub-tables are created pointed to by the root entry with an index - of the low root bits of huff. This is saved in low to check for when a - new sub-table should be started. drop is zero when the root table is - being filled, and drop is root when sub-tables are being filled. - - When a new sub-table is needed, it is necessary to look ahead in the - code lengths to determine what size sub-table is needed. The length - counts are used for this, and so count[] is decremented as codes are - entered in the tables. - - used keeps track of how many table entries have been allocated from the - provided *table space. It is checked when a LENS table is being made - against the space in *table, ENOUGH, minus the maximum space needed by - the worst case distance code, MAXD. This should never happen, but the - sufficiency of ENOUGH has not been proven exhaustively, hence the check. - This assumes that when type == LENS, bits == 9. - - sym increments through all symbols, and the loop terminates when - all codes of length max, i.e. all codes, have been processed. This - routine permits incomplete codes, so another loop after this one fills - in the rest of the decoding tables with invalid code markers. - */ - - /* set up for code type */ - switch (type) { - case CODES: - base = extra = work; /* dummy value--not used */ - end = 19; - break; - case LENS: - base = lbase; - base -= 257; - extra = lext; - extra -= 257; - end = 256; - break; - default: /* DISTS */ - base = dbase; - extra = dext; - end = -1; - } - - /* initialize state for loop */ - huff = 0; /* starting code */ - sym = 0; /* starting code symbol */ - len = min; /* starting code length */ - next = *table; /* current table to fill in */ - curr = root; /* current table index bits */ - drop = 0; /* current bits to drop from code for index */ - low = (unsigned)(-1); /* trigger new sub-table when len > root */ - used = 1U << root; /* use root table entries */ - mask = used - 1; /* mask for comparing low */ - - /* check available table space */ - if (type == LENS && used >= ENOUGH - MAXD) - return 1; - - /* process all codes and make table entries */ - for (;;) { - /* create table entry */ - this.bits = (unsigned char)(len - drop); - if ((int)(work[sym]) < end) { - this.op = (unsigned char)0; - this.val = work[sym]; - } - else if ((int)(work[sym]) > end) { - this.op = (unsigned char)(extra[work[sym]]); - this.val = base[work[sym]]; - } - else { - this.op = (unsigned char)(32 + 64); /* end of block */ - this.val = 0; - } - - /* replicate for those indices with low len bits equal to huff */ - incr = 1U << (len - drop); - fill = 1U << curr; - min = fill; /* save offset to next table */ - do { - fill -= incr; - next[(huff >> drop) + fill] = this; - } while (fill != 0); - - /* backwards increment the len-bit code huff */ - incr = 1U << (len - 1); - while (huff & incr) - incr >>= 1; - if (incr != 0) { - huff &= incr - 1; - huff += incr; - } - else - huff = 0; - - /* go to next symbol, update count, len */ - sym++; - if (--(count[len]) == 0) { - if (len == max) break; - len = lens[work[sym]]; - } - - /* create new sub-table if needed */ - if (len > root && (huff & mask) != low) { - /* if first time, transition to sub-tables */ - if (drop == 0) - drop = root; - - /* increment past last table */ - next += min; /* here min is 1 << curr */ - - /* determine length of next table */ - curr = len - drop; - left = (int)(1 << curr); - while (curr + drop < max) { - left -= count[curr + drop]; - if (left <= 0) break; - curr++; - left <<= 1; - } - - /* check for enough space */ - used += 1U << curr; - if (type == LENS && used >= ENOUGH - MAXD) - return 1; - - /* point entry in root table to sub-table */ - low = huff & mask; - (*table)[low].op = (unsigned char)curr; - (*table)[low].bits = (unsigned char)root; - (*table)[low].val = (unsigned short)(next - *table); - } - } - - /* - Fill in rest of table for incomplete codes. This loop is similar to the - loop above in incrementing huff for table indices. It is assumed that - len is equal to curr + drop, so there is no loop needed to increment - through high index bits. When the current sub-table is filled, the loop - drops back to the root table to fill in any remaining entries there. - */ - this.op = (unsigned char)64; /* invalid code marker */ - this.bits = (unsigned char)(len - drop); - this.val = (unsigned short)0; - while (huff != 0) { - /* when done with sub-table, drop back to root table */ - if (drop != 0 && (huff & mask) != low) { - drop = 0; - len = root; - next = *table; - this.bits = (unsigned char)len; - } - - /* put invalid code marker in table */ - next[huff >> drop] = this; - - /* backwards increment the len-bit code huff */ - incr = 1U << (len - 1); - while (huff & incr) - incr >>= 1; - if (incr != 0) { - huff &= incr - 1; - huff += incr; - } - else - huff = 0; - } - - /* set return parameters */ - *table += used; - *bits = root; - return 0; -} - -/*+++++*/ -/* inflate.c -- zlib decompression - * Copyright (C) 1995-2005 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ -local void fixedtables OF((struct inflate_state FAR *state)); -local int updatewindow OF((z_streamp strm, unsigned out)); - -int ZEXPORT inflateReset(strm) -z_streamp strm; -{ - struct inflate_state FAR *state; - - if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; - state = (struct inflate_state FAR *)strm->state; - strm->total_in = strm->total_out = state->total = 0; - strm->msg = Z_NULL; - strm->adler = 1; /* to support ill-conceived Java test suite */ - state->mode = HEAD; - state->last = 0; - state->havedict = 0; - state->dmax = 32768U; - state->head = Z_NULL; - state->wsize = 0; - state->whave = 0; - state->write = 0; - state->hold = 0; - state->bits = 0; - state->lencode = state->distcode = state->next = state->codes; - WATCHDOG_RESET(); - Tracev((stderr, "inflate: reset\n")); - return Z_OK; -} - -int ZEXPORT inflateInit2_(strm, windowBits, version, stream_size) -z_streamp strm; -int windowBits; -const char *version; -int stream_size; -{ - struct inflate_state FAR *state; - - if (version == Z_NULL || version[0] != ZLIB_VERSION[0] || - stream_size != (int)(sizeof(z_stream))) - return Z_VERSION_ERROR; - if (strm == Z_NULL) return Z_STREAM_ERROR; - strm->msg = Z_NULL; /* in case we return an error */ - if (strm->zalloc == (alloc_func)0) { - strm->zalloc = zcalloc; - strm->opaque = (voidpf)0; - } - if (strm->zfree == (free_func)0) strm->zfree = zcfree; - state = (struct inflate_state FAR *) - ZALLOC(strm, 1, sizeof(struct inflate_state)); - if (state == Z_NULL) return Z_MEM_ERROR; - Tracev((stderr, "inflate: allocated\n")); - strm->state = (struct internal_state FAR *)state; - if (windowBits < 0) { - state->wrap = 0; - windowBits = -windowBits; - } - else { - state->wrap = (windowBits >> 4) + 1; -#ifdef GUNZIP - if (windowBits < 48) windowBits &= 15; -#endif - } - if (windowBits < 8 || windowBits > 15) { - ZFREE(strm, state); - strm->state = Z_NULL; - return Z_STREAM_ERROR; - } - state->wbits = (unsigned)windowBits; - state->window = Z_NULL; - return inflateReset(strm); -} - -int ZEXPORT inflateInit_(strm, version, stream_size) -z_streamp strm; -const char *version; -int stream_size; -{ - return inflateInit2_(strm, DEF_WBITS, version, stream_size); -} - -local void fixedtables(state) -struct inflate_state FAR *state; -{ - state->lencode = lenfix; - state->lenbits = 9; - state->distcode = distfix; - state->distbits = 5; -} - -/* - Update the window with the last wsize (normally 32K) bytes written before - returning. If window does not exist yet, create it. This is only called - when a window is already in use, or when output has been written during this - inflate call, but the end of the deflate stream has not been reached yet. - It is also called to create a window for dictionary data when a dictionary - is loaded. - - Providing output buffers larger than 32K to inflate() should provide a speed - advantage, since only the last 32K of output is copied to the sliding window - upon return from inflate(), and since all distances after the first 32K of - output will fall in the output data, making match copies simpler and faster. - The advantage may be dependent on the size of the processor's data caches. - */ -local int updatewindow(strm, out) -z_streamp strm; -unsigned out; -{ - struct inflate_state FAR *state; - unsigned copy, dist; - - state = (struct inflate_state FAR *)strm->state; - - /* if it hasn't been done already, allocate space for the window */ - if (state->window == Z_NULL) { - state->window = (unsigned char FAR *) - ZALLOC(strm, 1U << state->wbits, - sizeof(unsigned char)); - if (state->window == Z_NULL) return 1; - } - - /* if window not in use yet, initialize */ - if (state->wsize == 0) { - state->wsize = 1U << state->wbits; - state->write = 0; - state->whave = 0; - } - - /* copy state->wsize or less output bytes into the circular window */ - copy = out - strm->avail_out; - if (copy >= state->wsize) { - zmemcpy(state->window, strm->next_out - state->wsize, state->wsize); - state->write = 0; - state->whave = state->wsize; - } - else { - dist = state->wsize - state->write; - if (dist > copy) dist = copy; - zmemcpy(state->window + state->write, strm->next_out - copy, dist); - copy -= dist; - if (copy) { - zmemcpy(state->window, strm->next_out - copy, copy); - state->write = copy; - state->whave = state->wsize; - } - else { - state->write += dist; - if (state->write == state->wsize) state->write = 0; - if (state->whave < state->wsize) state->whave += dist; - } - } - return 0; -} - -/* Macros for inflate(): */ - -/* check function to use adler32() for zlib or crc32() for gzip */ -#define UPDATE(check, buf, len) \ - (state->flags ? crc32(check, buf, len) : adler32(check, buf, len)) - -/* check macros for header crc */ -#define CRC2(check, word) \ - do { \ - hbuf[0] = (unsigned char)(word); \ - hbuf[1] = (unsigned char)((word) >> 8); \ - check = crc32(check, hbuf, 2); \ - } while (0) - -#define CRC4(check, word) \ - do { \ - hbuf[0] = (unsigned char)(word); \ - hbuf[1] = (unsigned char)((word) >> 8); \ - hbuf[2] = (unsigned char)((word) >> 16); \ - hbuf[3] = (unsigned char)((word) >> 24); \ - check = crc32(check, hbuf, 4); \ - } while (0) - -/* Load registers with state in inflate() for speed */ -#define LOAD() \ - do { \ - put = strm->next_out; \ - left = strm->avail_out; \ - next = strm->next_in; \ - have = strm->avail_in; \ - hold = state->hold; \ - bits = state->bits; \ - } while (0) - -/* Restore state from registers in inflate() */ -#define RESTORE() \ - do { \ - strm->next_out = put; \ - strm->avail_out = left; \ - strm->next_in = next; \ - strm->avail_in = have; \ - state->hold = hold; \ - state->bits = bits; \ - } while (0) - -/* Clear the input bit accumulator */ -#define INITBITS() \ - do { \ - hold = 0; \ - bits = 0; \ - } while (0) - -/* Get a byte of input into the bit accumulator, or return from inflate() - if there is no input available. */ -#define PULLBYTE() \ - do { \ - if (have == 0) goto inf_leave; \ - have--; \ - hold += (unsigned long)(*next++) << bits; \ - bits += 8; \ - } while (0) - -/* Assure that there are at least n bits in the bit accumulator. If there is - not enough available input to do that, then return from inflate(). */ -#define NEEDBITS(n) \ - do { \ - while (bits < (unsigned)(n)) \ - PULLBYTE(); \ - } while (0) - -/* Return the low n bits of the bit accumulator (n < 16) */ -#define BITS(n) \ - ((unsigned)hold & ((1U << (n)) - 1)) - -/* Remove n bits from the bit accumulator */ -#define DROPBITS(n) \ - do { \ - hold >>= (n); \ - bits -= (unsigned)(n); \ - } while (0) - -/* Remove zero to seven bits as needed to go to a byte boundary */ -#define BYTEBITS() \ - do { \ - hold >>= bits & 7; \ - bits -= bits & 7; \ - } while (0) - -/* Reverse the bytes in a 32-bit value */ -#define REVERSE(q) \ - ((((q) >> 24) & 0xff) + (((q) >> 8) & 0xff00) + \ - (((q) & 0xff00) << 8) + (((q) & 0xff) << 24)) - -/* - inflate() uses a state machine to process as much input data and generate as - much output data as possible before returning. The state machine is - structured roughly as follows: - - for (;;) switch (state) { - ... - case STATEn: - if (not enough input data or output space to make progress) - return; - ... make progress ... - state = STATEm; - break; - ... - } - - so when inflate() is called again, the same case is attempted again, and - if the appropriate resources are provided, the machine proceeds to the - next state. The NEEDBITS() macro is usually the way the state evaluates - whether it can proceed or should return. NEEDBITS() does the return if - the requested bits are not available. The typical use of the BITS macros - is: - - NEEDBITS(n); - ... do something with BITS(n) ... - DROPBITS(n); - - where NEEDBITS(n) either returns from inflate() if there isn't enough - input left to load n bits into the accumulator, or it continues. BITS(n) - gives the low n bits in the accumulator. When done, DROPBITS(n) drops - the low n bits off the accumulator. INITBITS() clears the accumulator - and sets the number of available bits to zero. BYTEBITS() discards just - enough bits to put the accumulator on a byte boundary. After BYTEBITS() - and a NEEDBITS(8), then BITS(8) would return the next byte in the stream. - - NEEDBITS(n) uses PULLBYTE() to get an available byte of input, or to return - if there is no input available. The decoding of variable length codes uses - PULLBYTE() directly in order to pull just enough bytes to decode the next - code, and no more. - - Some states loop until they get enough input, making sure that enough - state information is maintained to continue the loop where it left off - if NEEDBITS() returns in the loop. For example, want, need, and keep - would all have to actually be part of the saved state in case NEEDBITS() - returns: - - case STATEw: - while (want < need) { - NEEDBITS(n); - keep[want++] = BITS(n); - DROPBITS(n); - } - state = STATEx; - case STATEx: - - As shown above, if the next state is also the next case, then the break - is omitted. - - A state may also return if there is not enough output space available to - complete that state. Those states are copying stored data, writing a - literal byte, and copying a matching string. - - When returning, a "goto inf_leave" is used to update the total counters, - update the check value, and determine whether any progress has been made - during that inflate() call in order to return the proper return code. - Progress is defined as a change in either strm->avail_in or strm->avail_out. - When there is a window, goto inf_leave will update the window with the last - output written. If a goto inf_leave occurs in the middle of decompression - and there is no window currently, goto inf_leave will create one and copy - output to the window for the next call of inflate(). - - In this implementation, the flush parameter of inflate() only affects the - return code (per zlib.h). inflate() always writes as much as possible to - strm->next_out, given the space available and the provided input--the effect - documented in zlib.h of Z_SYNC_FLUSH. Furthermore, inflate() always defers - the allocation of and copying into a sliding window until necessary, which - provides the effect documented in zlib.h for Z_FINISH when the entire input - stream available. So the only thing the flush parameter actually does is: - when flush is set to Z_FINISH, inflate() cannot return Z_OK. Instead it - will return Z_BUF_ERROR if it has not reached the end of the stream. - */ -int ZEXPORT inflate(strm, flush) -z_streamp strm; -int flush; -{ - struct inflate_state FAR *state; - unsigned char FAR *next; /* next input */ - unsigned char FAR *put; /* next output */ - unsigned have, left; /* available input and output */ - unsigned long hold; /* bit buffer */ - unsigned bits; /* bits in bit buffer */ - unsigned in, out; /* save starting available input and output */ - unsigned copy; /* number of stored or match bytes to copy */ - unsigned char FAR *from; /* where to copy match bytes from */ - code this; /* current decoding table entry */ - code last; /* parent table entry */ - unsigned len; /* length to copy for repeats, bits to drop */ - int ret; /* return code */ -#ifdef GUNZIP - unsigned char hbuf[4]; /* buffer for gzip header crc calculation */ -#endif - static const unsigned short order[19] = /* permutation of code lengths */ - {16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15}; - - if (strm == Z_NULL || strm->state == Z_NULL || - (strm->next_in == Z_NULL && strm->avail_in != 0)) - return Z_STREAM_ERROR; - - state = (struct inflate_state FAR *)strm->state; - if (state->mode == TYPE) state->mode = TYPEDO; /* skip check */ - LOAD(); - in = have; - out = left; - ret = Z_OK; - for (;;) - switch (state->mode) { - case HEAD: - if (state->wrap == 0) { - state->mode = TYPEDO; - break; - } - NEEDBITS(16); -#ifdef GUNZIP - if ((state->wrap & 2) && hold == 0x8b1f) { /* gzip header */ - state->check = crc32(0L, Z_NULL, 0); - CRC2(state->check, hold); - INITBITS(); - state->mode = FLAGS; - break; - } - state->flags = 0; /* expect zlib header */ - if (state->head != Z_NULL) - state->head->done = -1; - if (!(state->wrap & 1) || /* check if zlib header allowed */ -#else - if ( -#endif - ((BITS(8) << 8) + (hold >> 8)) % 31) { - strm->msg = (char *)"incorrect header check"; - state->mode = BAD; - break; - } - if (BITS(4) != Z_DEFLATED) { - strm->msg = (char *)"unknown compression method"; - state->mode = BAD; - break; - } - DROPBITS(4); - len = BITS(4) + 8; - if (len > state->wbits) { - strm->msg = (char *)"invalid window size"; - state->mode = BAD; - break; - } - state->dmax = 1U << len; - Tracev((stderr, "inflate: zlib header ok\n")); - strm->adler = state->check = adler32(0L, Z_NULL, 0); - state->mode = hold & 0x200 ? DICTID : TYPE; - INITBITS(); - break; -#ifdef GUNZIP - case FLAGS: - NEEDBITS(16); - state->flags = (int)(hold); - if ((state->flags & 0xff) != Z_DEFLATED) { - strm->msg = (char *)"unknown compression method"; - state->mode = BAD; - break; - } - if (state->flags & 0xe000) { - strm->msg = (char *)"unknown header flags set"; - state->mode = BAD; - break; - } - if (state->head != Z_NULL) - state->head->text = (int)((hold >> 8) & 1); - if (state->flags & 0x0200) CRC2(state->check, hold); - INITBITS(); - state->mode = TIME; - case TIME: - NEEDBITS(32); - if (state->head != Z_NULL) - state->head->time = hold; - if (state->flags & 0x0200) CRC4(state->check, hold); - INITBITS(); - state->mode = OS; - case OS: - NEEDBITS(16); - if (state->head != Z_NULL) { - state->head->xflags = (int)(hold & 0xff); - state->head->os = (int)(hold >> 8); - } - if (state->flags & 0x0200) CRC2(state->check, hold); - INITBITS(); - state->mode = EXLEN; - case EXLEN: - if (state->flags & 0x0400) { - NEEDBITS(16); - state->length = (unsigned)(hold); - if (state->head != Z_NULL) - state->head->extra_len = (unsigned)hold; - if (state->flags & 0x0200) CRC2(state->check, hold); - INITBITS(); - } - else if (state->head != Z_NULL) - state->head->extra = Z_NULL; - state->mode = EXTRA; - case EXTRA: - if (state->flags & 0x0400) { - copy = state->length; - if (copy > have) copy = have; - if (copy) { - if (state->head != Z_NULL && - state->head->extra != Z_NULL) { - len = state->head->extra_len - state->length; - zmemcpy(state->head->extra + len, next, - len + copy > state->head->extra_max ? - state->head->extra_max - len : copy); - } - if (state->flags & 0x0200) - state->check = crc32(state->check, next, copy); - have -= copy; - next += copy; - state->length -= copy; - } - if (state->length) goto inf_leave; - } - state->length = 0; - state->mode = NAME; - case NAME: - if (state->flags & 0x0800) { - if (have == 0) goto inf_leave; - copy = 0; - do { - len = (unsigned)(next[copy++]); - if (state->head != Z_NULL && - state->head->name != Z_NULL && - state->length < state->head->name_max) - state->head->name[state->length++] = len; - } while (len && copy < have); - if (state->flags & 0x0200) - state->check = crc32(state->check, next, copy); - have -= copy; - next += copy; - if (len) goto inf_leave; - } - else if (state->head != Z_NULL) - state->head->name = Z_NULL; - state->length = 0; - state->mode = COMMENT; - case COMMENT: - if (state->flags & 0x1000) { - if (have == 0) goto inf_leave; - copy = 0; - do { - len = (unsigned)(next[copy++]); - if (state->head != Z_NULL && - state->head->comment != Z_NULL && - state->length < state->head->comm_max) - state->head->comment[state->length++] = len; - } while (len && copy < have); - if (state->flags & 0x0200) - state->check = crc32(state->check, next, copy); - have -= copy; - next += copy; - if (len) goto inf_leave; - } - else if (state->head != Z_NULL) - state->head->comment = Z_NULL; - state->mode = HCRC; - case HCRC: - if (state->flags & 0x0200) { - NEEDBITS(16); - if (hold != (state->check & 0xffff)) { - strm->msg = (char *)"header crc mismatch"; - state->mode = BAD; - break; - } - INITBITS(); - } - if (state->head != Z_NULL) { - state->head->hcrc = (int)((state->flags >> 9) & 1); - state->head->done = 1; - } - strm->adler = state->check = crc32(0L, Z_NULL, 0); - state->mode = TYPE; - break; -#endif - case DICTID: - NEEDBITS(32); - strm->adler = state->check = REVERSE(hold); - INITBITS(); - state->mode = DICT; - case DICT: - if (state->havedict == 0) { - RESTORE(); - return Z_NEED_DICT; - } - strm->adler = state->check = adler32(0L, Z_NULL, 0); - state->mode = TYPE; - case TYPE: - WATCHDOG_RESET(); - if (flush == Z_BLOCK) goto inf_leave; - case TYPEDO: - if (state->last) { - BYTEBITS(); - state->mode = CHECK; - break; - } - NEEDBITS(3); - state->last = BITS(1); - DROPBITS(1); - switch (BITS(2)) { - case 0: /* stored block */ - Tracev((stderr, "inflate: stored block%s\n", - state->last ? " (last)" : "")); - state->mode = STORED; - break; - case 1: /* fixed block */ - fixedtables(state); - Tracev((stderr, "inflate: fixed codes block%s\n", - state->last ? " (last)" : "")); - state->mode = LEN; /* decode codes */ - break; - case 2: /* dynamic block */ - Tracev((stderr, "inflate: dynamic codes block%s\n", - state->last ? " (last)" : "")); - state->mode = TABLE; - break; - case 3: - strm->msg = (char *)"invalid block type"; - state->mode = BAD; - } - DROPBITS(2); - break; - case STORED: - BYTEBITS(); /* go to byte boundary */ - NEEDBITS(32); - if ((hold & 0xffff) != ((hold >> 16) ^ 0xffff)) { - strm->msg = (char *)"invalid stored block lengths"; - state->mode = BAD; - break; - } - state->length = (unsigned)hold & 0xffff; - Tracev((stderr, "inflate: stored length %u\n", - state->length)); - INITBITS(); - state->mode = COPY; - case COPY: - copy = state->length; - if (copy) { - if (copy > have) copy = have; - if (copy > left) copy = left; - if (copy == 0) goto inf_leave; - zmemcpy(put, next, copy); - have -= copy; - next += copy; - left -= copy; - put += copy; - state->length -= copy; - break; - } - Tracev((stderr, "inflate: stored end\n")); - state->mode = TYPE; - break; - case TABLE: - NEEDBITS(14); - state->nlen = BITS(5) + 257; - DROPBITS(5); - state->ndist = BITS(5) + 1; - DROPBITS(5); - state->ncode = BITS(4) + 4; - DROPBITS(4); -#ifndef PKZIP_BUG_WORKAROUND - if (state->nlen > 286 || state->ndist > 30) { - strm->msg = (char *)"too many length or distance symbols"; - state->mode = BAD; - break; - } -#endif - Tracev((stderr, "inflate: table sizes ok\n")); - state->have = 0; - state->mode = LENLENS; - case LENLENS: - while (state->have < state->ncode) { - NEEDBITS(3); - state->lens[order[state->have++]] = (unsigned short)BITS(3); - DROPBITS(3); - } - while (state->have < 19) - state->lens[order[state->have++]] = 0; - state->next = state->codes; - state->lencode = (code const FAR *)(state->next); - state->lenbits = 7; - ret = inflate_table(CODES, state->lens, 19, &(state->next), - &(state->lenbits), state->work); - if (ret) { - strm->msg = (char *)"invalid code lengths set"; - state->mode = BAD; - break; - } - Tracev((stderr, "inflate: code lengths ok\n")); - state->have = 0; - state->mode = CODELENS; - case CODELENS: - while (state->have < state->nlen + state->ndist) { - for (;;) { - this = state->lencode[BITS(state->lenbits)]; - if ((unsigned)(this.bits) <= bits) break; - PULLBYTE(); - } - if (this.val < 16) { - NEEDBITS(this.bits); - DROPBITS(this.bits); - state->lens[state->have++] = this.val; - } - else { - if (this.val == 16) { - NEEDBITS(this.bits + 2); - DROPBITS(this.bits); - if (state->have == 0) { - strm->msg = (char *)"invalid bit length repeat"; - state->mode = BAD; - break; - } - len = state->lens[state->have - 1]; - copy = 3 + BITS(2); - DROPBITS(2); - } - else if (this.val == 17) { - NEEDBITS(this.bits + 3); - DROPBITS(this.bits); - len = 0; - copy = 3 + BITS(3); - DROPBITS(3); - } - else { - NEEDBITS(this.bits + 7); - DROPBITS(this.bits); - len = 0; - copy = 11 + BITS(7); - DROPBITS(7); - } - if (state->have + copy > state->nlen + state->ndist) { - strm->msg = (char *)"invalid bit length repeat"; - state->mode = BAD; - break; - } - while (copy--) - state->lens[state->have++] = (unsigned short)len; - } - } - - /* handle error breaks in while */ - if (state->mode == BAD) break; - - /* build code tables */ - state->next = state->codes; - state->lencode = (code const FAR *)(state->next); - state->lenbits = 9; - ret = inflate_table(LENS, state->lens, state->nlen, &(state->next), - &(state->lenbits), state->work); - if (ret) { - strm->msg = (char *)"invalid literal/lengths set"; - state->mode = BAD; - break; - } - state->distcode = (code const FAR *)(state->next); - state->distbits = 6; - ret = inflate_table(DISTS, state->lens + state->nlen, state->ndist, - &(state->next), &(state->distbits), state->work); - if (ret) { - strm->msg = (char *)"invalid distances set"; - state->mode = BAD; - break; - } - Tracev((stderr, "inflate: codes ok\n")); - state->mode = LEN; - case LEN: - WATCHDOG_RESET(); - if (have >= 6 && left >= 258) { - RESTORE(); - inflate_fast(strm, out); - LOAD(); - break; - } - for (;;) { - this = state->lencode[BITS(state->lenbits)]; - if ((unsigned)(this.bits) <= bits) break; - PULLBYTE(); - } - if (this.op && (this.op & 0xf0) == 0) { - last = this; - for (;;) { - this = state->lencode[last.val + - (BITS(last.bits + last.op) >> last.bits)]; - if ((unsigned)(last.bits + this.bits) <= bits) break; - PULLBYTE(); - } - DROPBITS(last.bits); - } - DROPBITS(this.bits); - state->length = (unsigned)this.val; - if ((int)(this.op) == 0) { - Tracevv((stderr, this.val >= 0x20 && this.val < 0x7f ? - "inflate: literal '%c'\n" : - "inflate: literal 0x%02x\n", this.val)); - state->mode = LIT; - break; - } - if (this.op & 32) { - Tracevv((stderr, "inflate: end of block\n")); - state->mode = TYPE; - break; - } - if (this.op & 64) { - strm->msg = (char *)"invalid literal/length code"; - state->mode = BAD; - break; - } - state->extra = (unsigned)(this.op) & 15; - state->mode = LENEXT; - case LENEXT: - if (state->extra) { - NEEDBITS(state->extra); - state->length += BITS(state->extra); - DROPBITS(state->extra); - } - Tracevv((stderr, "inflate: length %u\n", state->length)); - state->mode = DIST; - case DIST: - for (;;) { - this = state->distcode[BITS(state->distbits)]; - if ((unsigned)(this.bits) <= bits) break; - PULLBYTE(); - } - if ((this.op & 0xf0) == 0) { - last = this; - for (;;) { - this = state->distcode[last.val + - (BITS(last.bits + last.op) >> last.bits)]; - if ((unsigned)(last.bits + this.bits) <= bits) break; - PULLBYTE(); - } - DROPBITS(last.bits); - } - DROPBITS(this.bits); - if (this.op & 64) { - strm->msg = (char *)"invalid distance code"; - state->mode = BAD; - break; - } - state->offset = (unsigned)this.val; - state->extra = (unsigned)(this.op) & 15; - state->mode = DISTEXT; - case DISTEXT: - if (state->extra) { - NEEDBITS(state->extra); - state->offset += BITS(state->extra); - DROPBITS(state->extra); - } -#ifdef INFLATE_STRICT - if (state->offset > state->dmax) { - strm->msg = (char *)"invalid distance too far back"; - state->mode = BAD; - break; - } -#endif - if (state->offset > state->whave + out - left) { - strm->msg = (char *)"invalid distance too far back"; - state->mode = BAD; - break; - } - Tracevv((stderr, "inflate: distance %u\n", state->offset)); - state->mode = MATCH; - case MATCH: - if (left == 0) goto inf_leave; - copy = out - left; - if (state->offset > copy) { /* copy from window */ - copy = state->offset - copy; - if (copy > state->write) { - copy -= state->write; - from = state->window + (state->wsize - copy); - } - else - from = state->window + (state->write - copy); - if (copy > state->length) copy = state->length; - } - else { /* copy from output */ - from = put - state->offset; - copy = state->length; - } - if (copy > left) copy = left; - left -= copy; - state->length -= copy; - do { - *put++ = *from++; - } while (--copy); - if (state->length == 0) state->mode = LEN; - break; - case LIT: - if (left == 0) goto inf_leave; - *put++ = (unsigned char)(state->length); - left--; - state->mode = LEN; - break; - case CHECK: - if (state->wrap) { - NEEDBITS(32); - out -= left; - strm->total_out += out; - state->total += out; - if (out) - strm->adler = state->check = - UPDATE(state->check, put - out, out); - out = left; - if (( -#ifdef GUNZIP - state->flags ? hold : -#endif - REVERSE(hold)) != state->check) { - strm->msg = (char *)"incorrect data check"; - state->mode = BAD; - break; - } - INITBITS(); - Tracev((stderr, "inflate: check matches trailer\n")); - } -#ifdef GUNZIP - state->mode = LENGTH; - case LENGTH: - if (state->wrap && state->flags) { - NEEDBITS(32); - if (hold != (state->total & 0xffffffffUL)) { - strm->msg = (char *)"incorrect length check"; - state->mode = BAD; - break; - } - INITBITS(); - Tracev((stderr, "inflate: length matches trailer\n")); - } -#endif - state->mode = DONE; - case DONE: - ret = Z_STREAM_END; - goto inf_leave; - case BAD: - ret = Z_DATA_ERROR; - goto inf_leave; - case MEM: - return Z_MEM_ERROR; - case SYNC: - default: - return Z_STREAM_ERROR; - } - - /* - Return from inflate(), updating the total counts and the check value. - If there was no progress during the inflate() call, return a buffer - error. Call updatewindow() to create and/or update the window state. - Note: a memory error from inflate() is non-recoverable. - */ - inf_leave: - RESTORE(); - if (state->wsize || (state->mode < CHECK && out != strm->avail_out)) - if (updatewindow(strm, out)) { - state->mode = MEM; - return Z_MEM_ERROR; - } - in -= strm->avail_in; - out -= strm->avail_out; - strm->total_in += in; - strm->total_out += out; - state->total += out; - if (state->wrap && out) - strm->adler = state->check = - UPDATE(state->check, strm->next_out - out, out); - strm->data_type = state->bits + (state->last ? 64 : 0) + - (state->mode == TYPE ? 128 : 0); - if (((in == 0 && out == 0) || flush == Z_FINISH) && ret == Z_OK) - ret = Z_BUF_ERROR; - return ret; -} - -int ZEXPORT inflateEnd(strm) -z_streamp strm; -{ - struct inflate_state FAR *state; - if (strm == Z_NULL || strm->state == Z_NULL || strm->zfree == (free_func)0) - return Z_STREAM_ERROR; - state = (struct inflate_state FAR *)strm->state; - if (state->window != Z_NULL) { - WATCHDOG_RESET(); - ZFREE(strm, state->window); - } - ZFREE(strm, strm->state); - strm->state = Z_NULL; - Tracev((stderr, "inflate: end\n")); - return Z_OK; -} - -/*+++++*/ -/* zutil.c -- target dependent utility functions for the compression library - * Copyright (C) 1995-2005 Jean-loup Gailly. - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* @(#) $Id$ */ - -#ifndef NO_DUMMY_DECL -struct internal_state {int dummy;}; /* for buggy compilers */ -#endif - -const char * const z_errmsg[10] = { -"need dictionary", /* Z_NEED_DICT 2 */ -"stream end", /* Z_STREAM_END 1 */ -"", /* Z_OK 0 */ -"file error", /* Z_ERRNO (-1) */ -"stream error", /* Z_STREAM_ERROR (-2) */ -"data error", /* Z_DATA_ERROR (-3) */ -"insufficient memory", /* Z_MEM_ERROR (-4) */ -"buffer error", /* Z_BUF_ERROR (-5) */ -"incompatible version",/* Z_VERSION_ERROR (-6) */ -""}; - -#ifdef DEBUG - -#ifndef verbose -#define verbose 0 -#endif -int z_verbose = verbose; - -void z_error (m) - char *m; -{ - fprintf(stderr, "%s\n", m); - hang (); -} -#endif - -/* exported to allow conversion of error code to string for compress() and - * uncompress() - */ -#ifndef MY_ZCALLOC /* Any system without a special alloc function */ - -#ifndef STDC -extern voidp malloc OF((uInt size)); -extern voidp calloc OF((uInt items, uInt size)); -extern void free OF((voidpf ptr)); -#endif - -voidpf zcalloc (opaque, items, size) - voidpf opaque; - unsigned items; - unsigned size; -{ - if (opaque) - items += size - size; /* make compiler happy */ - return sizeof(uInt) > 2 ? (voidpf)malloc(items * size) : - (voidpf)calloc(items, size); -} - -void zcfree (opaque, ptr, nb) - voidpf opaque; - voidpf ptr; - unsigned nb; -{ - free(ptr); - if (opaque) - return; /* make compiler happy */ -} - -#endif /* MY_ZCALLOC */ -/*+++++*/ -/* adler32.c -- compute the Adler-32 checksum of a data stream - * Copyright (C) 1995-2004 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* @(#) $Id$ */ - -#define BASE 65521UL /* largest prime smaller than 65536 */ -#define NMAX 5552 -/* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */ - -#define DO1(buf,i) {adler += (buf)[i]; sum2 += adler;} -#define DO2(buf,i) DO1(buf,i); DO1(buf,i+1); -#define DO4(buf,i) DO2(buf,i); DO2(buf,i+2); -#define DO8(buf,i) DO4(buf,i); DO4(buf,i+4); -#define DO16(buf) DO8(buf,0); DO8(buf,8); - -/* use NO_DIVIDE if your processor does not do division in hardware */ -#ifdef NO_DIVIDE -#define MOD(a) \ - do { \ - if (a >= (BASE << 16)) \ - a -= (BASE << 16); \ - if (a >= (BASE << 15)) \ - a -= (BASE << 15); \ - if (a >= (BASE << 14)) \ - a -= (BASE << 14); \ - if (a >= (BASE << 13)) \ - a -= (BASE << 13); \ - if (a >= (BASE << 12)) \ - a -= (BASE << 12); \ - if (a >= (BASE << 11)) \ - a -= (BASE << 11); \ - if (a >= (BASE << 10)) \ - a -= (BASE << 10); \ - if (a >= (BASE << 9)) \ - a -= (BASE << 9); \ - if (a >= (BASE << 8)) \ - a -= (BASE << 8); \ - if (a >= (BASE << 7)) \ - a -= (BASE << 7); \ - if (a >= (BASE << 6)) \ - a -= (BASE << 6); \ - if (a >= (BASE << 5)) \ - a -= (BASE << 5); \ - if (a >= (BASE << 4)) \ - a -= (BASE << 4); \ - if (a >= (BASE << 3)) \ - a -= (BASE << 3); \ - if (a >= (BASE << 2)) \ - a -= (BASE << 2); \ - if (a >= (BASE << 1)) \ - a -= (BASE << 1); \ - if (a >= BASE) \ - a -= BASE; \ - } while (0) -#define MOD4(a) \ - do { \ - if (a >= (BASE << 4)) \ - a -= (BASE << 4); \ - if (a >= (BASE << 3)) \ - a -= (BASE << 3); \ - if (a >= (BASE << 2)) \ - a -= (BASE << 2); \ - if (a >= (BASE << 1)) \ - a -= (BASE << 1); \ - if (a >= BASE) \ - a -= BASE; \ - } while (0) -#else -#define MOD(a) a %= BASE -#define MOD4(a) a %= BASE -#endif - -/* ========================================================================= */ -uLong ZEXPORT adler32(adler, buf, len) - uLong adler; - const Bytef *buf; - uInt len; -{ - unsigned long sum2; - unsigned n; - - /* split Adler-32 into component sums */ - sum2 = (adler >> 16) & 0xffff; - adler &= 0xffff; - - /* in case user likes doing a byte at a time, keep it fast */ - if (len == 1) { - adler += buf[0]; - if (adler >= BASE) - adler -= BASE; - sum2 += adler; - if (sum2 >= BASE) - sum2 -= BASE; - return adler | (sum2 << 16); - } - - /* initial Adler-32 value (deferred check for len == 1 speed) */ - if (buf == Z_NULL) - return 1L; - - /* in case short lengths are provided, keep it somewhat fast */ - if (len < 16) { - while (len--) { - adler += *buf++; - sum2 += adler; - } - if (adler >= BASE) - adler -= BASE; - MOD4(sum2); /* only added so many BASE's */ - return adler | (sum2 << 16); - } - - /* do length NMAX blocks -- requires just one modulo operation */ - while (len >= NMAX) { - len -= NMAX; - n = NMAX / 16; /* NMAX is divisible by 16 */ - do { - DO16(buf); /* 16 sums unrolled */ - buf += 16; - } while (--n); - MOD(adler); - MOD(sum2); - } - - /* do remaining bytes (less than NMAX, still just one modulo) */ - if (len) { /* avoid modulos if none remaining */ - while (len >= 16) { - len -= 16; - DO16(buf); - buf += 16; - } - while (len--) { - adler += *buf++; - sum2 += adler; - } - MOD(adler); - MOD(sum2); - } - - /* return recombined sums */ - return adler | (sum2 << 16); -} diff --git a/lib/zlib/Makefile b/lib/zlib/Makefile new file mode 100644 index 0000000..1596302 --- /dev/null +++ b/lib/zlib/Makefile @@ -0,0 +1,44 @@ +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)libz.o + +COBJS-$(CONFIG_ZLIB) += zlib.o + +COBJS := $(COBJS-y) +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/lib/zlib/adler32.c b/lib/zlib/adler32.c new file mode 100644 index 0000000..dc9480d --- /dev/null +++ b/lib/zlib/adler32.c @@ -0,0 +1,125 @@ +/* adler32.c -- compute the Adler-32 checksum of a data stream + * Copyright (C) 1995-2004 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* @(#) $Id$ */ + +#define ZLIB_INTERNAL +#include "zlib.h" + +#define BASE 65521UL /* largest prime smaller than 65536 */ +#define NMAX 5552 +/* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */ + +#define DO1(buf,i) {adler += (buf)[i]; sum2 += adler;} +#define DO2(buf,i) DO1(buf,i); DO1(buf,i+1); +#define DO4(buf,i) DO2(buf,i); DO2(buf,i+2); +#define DO8(buf,i) DO4(buf,i); DO4(buf,i+4); +#define DO16(buf) DO8(buf,0); DO8(buf,8); + +/* use NO_DIVIDE if your processor does not do division in hardware */ +#ifdef NO_DIVIDE +# define MOD(a) \ + do { \ + if (a >= (BASE << 16)) a -= (BASE << 16); \ + if (a >= (BASE << 15)) a -= (BASE << 15); \ + if (a >= (BASE << 14)) a -= (BASE << 14); \ + if (a >= (BASE << 13)) a -= (BASE << 13); \ + if (a >= (BASE << 12)) a -= (BASE << 12); \ + if (a >= (BASE << 11)) a -= (BASE << 11); \ + if (a >= (BASE << 10)) a -= (BASE << 10); \ + if (a >= (BASE << 9)) a -= (BASE << 9); \ + if (a >= (BASE << 8)) a -= (BASE << 8); \ + if (a >= (BASE << 7)) a -= (BASE << 7); \ + if (a >= (BASE << 6)) a -= (BASE << 6); \ + if (a >= (BASE << 5)) a -= (BASE << 5); \ + if (a >= (BASE << 4)) a -= (BASE << 4); \ + if (a >= (BASE << 3)) a -= (BASE << 3); \ + if (a >= (BASE << 2)) a -= (BASE << 2); \ + if (a >= (BASE << 1)) a -= (BASE << 1); \ + if (a >= BASE) a -= BASE; \ + } while (0) +# define MOD4(a) \ + do { \ + if (a >= (BASE << 4)) a -= (BASE << 4); \ + if (a >= (BASE << 3)) a -= (BASE << 3); \ + if (a >= (BASE << 2)) a -= (BASE << 2); \ + if (a >= (BASE << 1)) a -= (BASE << 1); \ + if (a >= BASE) a -= BASE; \ + } while (0) +#else +# define MOD(a) a %= BASE +# define MOD4(a) a %= BASE +#endif + +/* ========================================================================= */ +uLong ZEXPORT adler32(adler, buf, len) + uLong adler; + const Bytef *buf; + uInt len; +{ + unsigned long sum2; + unsigned n; + + /* split Adler-32 into component sums */ + sum2 = (adler >> 16) & 0xffff; + adler &= 0xffff; + + /* in case user likes doing a byte at a time, keep it fast */ + if (len == 1) { + adler += buf[0]; + if (adler >= BASE) + adler -= BASE; + sum2 += adler; + if (sum2 >= BASE) + sum2 -= BASE; + return adler | (sum2 << 16); + } + + /* initial Adler-32 value (deferred check for len == 1 speed) */ + if (buf == Z_NULL) + return 1L; + + /* in case short lengths are provided, keep it somewhat fast */ + if (len < 16) { + while (len--) { + adler += *buf++; + sum2 += adler; + } + if (adler >= BASE) + adler -= BASE; + MOD4(sum2); /* only added so many BASE's */ + return adler | (sum2 << 16); + } + + /* do length NMAX blocks -- requires just one modulo operation */ + while (len >= NMAX) { + len -= NMAX; + n = NMAX / 16; /* NMAX is divisible by 16 */ + do { + DO16(buf); /* 16 sums unrolled */ + buf += 16; + } while (--n); + MOD(adler); + MOD(sum2); + } + + /* do remaining bytes (less than NMAX, still just one modulo) */ + if (len) { /* avoid modulos if none remaining */ + while (len >= 16) { + len -= 16; + DO16(buf); + buf += 16; + } + while (len--) { + adler += *buf++; + sum2 += adler; + } + MOD(adler); + MOD(sum2); + } + + /* return recombined sums */ + return adler | (sum2 << 16); +} diff --git a/lib/zlib/inffast.c b/lib/zlib/inffast.c new file mode 100644 index 0000000..8e823df --- /dev/null +++ b/lib/zlib/inffast.c @@ -0,0 +1,349 @@ +/* inffast.c -- fast decoding + * Copyright (C) 1995-2004 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* U-boot: we already included these +#include "zutil.h" +#include "inftrees.h" +#include "inflate.h" +#include "inffast.h" +*/ + +#ifndef ASMINF + +/* Allow machine dependent optimization for post-increment or pre-increment. + Based on testing to date, + Pre-increment preferred for: + - PowerPC G3 (Adler) + - MIPS R5000 (Randers-Pehrson) + Post-increment preferred for: + - none + No measurable difference: + - Pentium III (Anderson) + - M68060 (Nikl) + */ +#ifdef POSTINC +# define OFF 0 +# define PUP(a) *(a)++ +#else +# define OFF 1 +# define PUP(a) *++(a) +#endif + +/* + Decode literal, length, and distance codes and write out the resulting + literal and match bytes until either not enough input or output is + available, an end-of-block is encountered, or a data error is encountered. + When large enough input and output buffers are supplied to inflate(), for + example, a 16K input buffer and a 64K output buffer, more than 95% of the + inflate execution time is spent in this routine. + + Entry assumptions: + + state->mode == LEN + strm->avail_in >= 6 + strm->avail_out >= 258 + start >= strm->avail_out + state->bits < 8 + + On return, state->mode is one of: + + LEN -- ran out of enough output space or enough available input + TYPE -- reached end of block code, inflate() to interpret next block + BAD -- error in block data + + Notes: + + - The maximum input bits used by a length/distance pair is 15 bits for the + length code, 5 bits for the length extra, 15 bits for the distance code, + and 13 bits for the distance extra. This totals 48 bits, or six bytes. + Therefore if strm->avail_in >= 6, then there is enough input to avoid + checking for available input while decoding. + + - The maximum bytes that a single length/distance pair can output is 258 + bytes, which is the maximum length that can be coded. inflate_fast() + requires strm->avail_out >= 258 for each loop to avoid checking for + output space. + */ +void inflate_fast(strm, start) +z_streamp strm; +unsigned start; /* inflate()'s starting value for strm->avail_out */ +{ + struct inflate_state FAR *state; + unsigned char FAR *in; /* local strm->next_in */ + unsigned char FAR *last; /* while in < last, enough input available */ + unsigned char FAR *out; /* local strm->next_out */ + unsigned char FAR *beg; /* inflate()'s initial strm->next_out */ + unsigned char FAR *end; /* while out < end, enough space available */ +#ifdef INFLATE_STRICT + unsigned dmax; /* maximum distance from zlib header */ +#endif + unsigned wsize; /* window size or zero if not using window */ + unsigned whave; /* valid bytes in the window */ + unsigned write; /* window write index */ + unsigned char FAR *window; /* allocated sliding window, if wsize != 0 */ + unsigned long hold; /* local strm->hold */ + unsigned bits; /* local strm->bits */ + code const FAR *lcode; /* local strm->lencode */ + code const FAR *dcode; /* local strm->distcode */ + unsigned lmask; /* mask for first level of length codes */ + unsigned dmask; /* mask for first level of distance codes */ + code this; /* retrieved table entry */ + unsigned op; /* code bits, operation, extra bits, or */ + /* window position, window bytes to copy */ + unsigned len; /* match length, unused bytes */ + unsigned dist; /* match distance */ + unsigned char FAR *from; /* where to copy match from */ + + /* copy state to local variables */ + state = (struct inflate_state FAR *)strm->state; + in = strm->next_in - OFF; + last = in + (strm->avail_in - 5); + out = strm->next_out - OFF; + beg = out - (start - strm->avail_out); + end = out + (strm->avail_out - 257); +#ifdef INFLATE_STRICT + dmax = state->dmax; +#endif + wsize = state->wsize; + whave = state->whave; + write = state->write; + window = state->window; + hold = state->hold; + bits = state->bits; + lcode = state->lencode; + dcode = state->distcode; + lmask = (1U << state->lenbits) - 1; + dmask = (1U << state->distbits) - 1; + + /* decode literals and length/distances until end-of-block or not enough + input data or output space */ + do { + if (bits < 15) { + hold += (unsigned long)(PUP(in)) << bits; + bits += 8; + hold += (unsigned long)(PUP(in)) << bits; + bits += 8; + } + this = lcode[hold & lmask]; + dolen: + op = (unsigned)(this.bits); + hold >>= op; + bits -= op; + op = (unsigned)(this.op); + if (op == 0) { /* literal */ + Tracevv((stderr, this.val >= 0x20 && this.val < 0x7f ? + "inflate: literal '%c'\n" : + "inflate: literal 0x%02x\n", this.val)); + PUP(out) = (unsigned char)(this.val); + } + else if (op & 16) { /* length base */ + len = (unsigned)(this.val); + op &= 15; /* number of extra bits */ + if (op) { + if (bits < op) { + hold += (unsigned long)(PUP(in)) << bits; + bits += 8; + } + len += (unsigned)hold & ((1U << op) - 1); + hold >>= op; + bits -= op; + } + Tracevv((stderr, "inflate: length %u\n", len)); + if (bits < 15) { + hold += (unsigned long)(PUP(in)) << bits; + bits += 8; + hold += (unsigned long)(PUP(in)) << bits; + bits += 8; + } + this = dcode[hold & dmask]; + dodist: + op = (unsigned)(this.bits); + hold >>= op; + bits -= op; + op = (unsigned)(this.op); + if (op & 16) { /* distance base */ + dist = (unsigned)(this.val); + op &= 15; /* number of extra bits */ + if (bits < op) { + hold += (unsigned long)(PUP(in)) << bits; + bits += 8; + if (bits < op) { + hold += (unsigned long)(PUP(in)) << bits; + bits += 8; + } + } + dist += (unsigned)hold & ((1U << op) - 1); +#ifdef INFLATE_STRICT + if (dist > dmax) { + strm->msg = (char *)"invalid distance too far back"; + state->mode = BAD; + break; + } +#endif + hold >>= op; + bits -= op; + Tracevv((stderr, "inflate: distance %u\n", dist)); + op = (unsigned)(out - beg); /* max distance in output */ + if (dist > op) { /* see if copy from window */ + op = dist - op; /* distance back in window */ + if (op > whave) { + strm->msg = (char *)"invalid distance too far back"; + state->mode = BAD; + break; + } + from = window - OFF; + if (write == 0) { /* very common case */ + from += wsize - op; + if (op < len) { /* some from window */ + len -= op; + do { + PUP(out) = PUP(from); + } while (--op); + from = out - dist; /* rest from output */ + } + } + else if (write < op) { /* wrap around window */ + from += wsize + write - op; + op -= write; + if (op < len) { /* some from end of window */ + len -= op; + do { + PUP(out) = PUP(from); + } while (--op); + from = window - OFF; + if (write < len) { /* some from start of window */ + op = write; + len -= op; + do { + PUP(out) = PUP(from); + } while (--op); + from = out - dist; /* rest from output */ + } + } + } + else { /* contiguous in window */ + from += write - op; + if (op < len) { /* some from window */ + len -= op; + do { + PUP(out) = PUP(from); + } while (--op); + from = out - dist; /* rest from output */ + } + } + while (len > 2) { + PUP(out) = PUP(from); + PUP(out) = PUP(from); + PUP(out) = PUP(from); + len -= 3; + } + if (len) { + PUP(out) = PUP(from); + if (len > 1) + PUP(out) = PUP(from); + } + } + else { + unsigned short *sout; + unsigned long loops; + + from = out - dist; /* copy direct from output */ + /* minimum length is three */ + /* Align out addr */ + if (!((long)(out - 1 + OFF) & 1)) { + PUP(out) = PUP(from); + len--; + } + sout = (unsigned short *)(out - OFF); + if (dist > 2 ) { + unsigned short *sfrom; + + sfrom = (unsigned short *)(from - OFF); + loops = len >> 1; + do + PUP(sout) = get_unaligned(++sfrom); + while (--loops); + out = (unsigned char *)sout + OFF; + from = (unsigned char *)sfrom + OFF; + } else { /* dist == 1 or dist == 2 */ + unsigned short pat16; + + pat16 = *(sout-2+2*OFF); + if (dist == 1) +#if defined(__BIG_ENDIAN) + pat16 = (pat16 & 0xff) | ((pat16 & 0xff ) << 8); +#elif defined(__LITTLE_ENDIAN) + pat16 = (pat16 & 0xff00) | ((pat16 & 0xff00 ) >> 8); +#else +#error __BIG_ENDIAN nor __LITTLE_ENDIAN is defined +#endif + loops = len >> 1; + do + PUP(sout) = pat16; + while (--loops); + out = (unsigned char *)sout + OFF; + } + if (len & 1) + PUP(out) = PUP(from); + } + } + else if ((op & 64) == 0) { /* 2nd level distance code */ + this = dcode[this.val + (hold & ((1U << op) - 1))]; + goto dodist; + } + else { + strm->msg = (char *)"invalid distance code"; + state->mode = BAD; + break; + } + } + else if ((op & 64) == 0) { /* 2nd level length code */ + this = lcode[this.val + (hold & ((1U << op) - 1))]; + goto dolen; + } + else if (op & 32) { /* end-of-block */ + Tracevv((stderr, "inflate: end of block\n")); + state->mode = TYPE; + break; + } + else { + strm->msg = (char *)"invalid literal/length code"; + state->mode = BAD; + break; + } + } while (in < last && out < end); + + /* return unused bytes (on entry, bits < 8, so in won't go too far back) */ + len = bits >> 3; + in -= len; + bits -= len << 3; + hold &= (1U << bits) - 1; + + /* update state and return */ + strm->next_in = in + OFF; + strm->next_out = out + OFF; + strm->avail_in = (unsigned)(in < last ? 5 + (last - in) : 5 - (in - last)); + strm->avail_out = (unsigned)(out < end ? + 257 + (end - out) : 257 - (out - end)); + state->hold = hold; + state->bits = bits; + return; +} + +/* + inflate_fast() speedups that turned out slower (on a PowerPC G3 750CXe): + - Using bit fields for code structure + - Different op definition to avoid & for extra bits (do & for table bits) + - Three separate decoding do-loops for direct, window, and write == 0 + - Special case for distance > 1 copies to do overlapped load and store copy + - Explicit branch predictions (based on measured branch probabilities) + - Deferring match copy and interspersed it with decoding subsequent codes + - Swapping literal/length else + - Swapping window/direct else + - Larger unrolled copy loops (three is about right) + - Moving len -= 3 statement into middle of loop + */ + +#endif /* !ASMINF */ diff --git a/lib/zlib/inffast.h b/lib/zlib/inffast.h new file mode 100644 index 0000000..1e88d2d --- /dev/null +++ b/lib/zlib/inffast.h @@ -0,0 +1,11 @@ +/* inffast.h -- header to use inffast.c + * Copyright (C) 1995-2003 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* WARNING: this file should *not* be used by applications. It is + part of the implementation of the compression library and is + subject to change. Applications should only use zlib.h. + */ + +void inflate_fast OF((z_streamp strm, unsigned start)); diff --git a/lib/zlib/inffixed.h b/lib/zlib/inffixed.h new file mode 100644 index 0000000..75ed4b5 --- /dev/null +++ b/lib/zlib/inffixed.h @@ -0,0 +1,94 @@ + /* inffixed.h -- table for decoding fixed codes + * Generated automatically by makefixed(). + */ + + /* WARNING: this file should *not* be used by applications. It + is part of the implementation of the compression library and + is subject to change. Applications should only use zlib.h. + */ + + static const code lenfix[512] = { + {96,7,0},{0,8,80},{0,8,16},{20,8,115},{18,7,31},{0,8,112},{0,8,48}, + {0,9,192},{16,7,10},{0,8,96},{0,8,32},{0,9,160},{0,8,0},{0,8,128}, + {0,8,64},{0,9,224},{16,7,6},{0,8,88},{0,8,24},{0,9,144},{19,7,59}, + {0,8,120},{0,8,56},{0,9,208},{17,7,17},{0,8,104},{0,8,40},{0,9,176}, + {0,8,8},{0,8,136},{0,8,72},{0,9,240},{16,7,4},{0,8,84},{0,8,20}, + {21,8,227},{19,7,43},{0,8,116},{0,8,52},{0,9,200},{17,7,13},{0,8,100}, + {0,8,36},{0,9,168},{0,8,4},{0,8,132},{0,8,68},{0,9,232},{16,7,8}, + {0,8,92},{0,8,28},{0,9,152},{20,7,83},{0,8,124},{0,8,60},{0,9,216}, + {18,7,23},{0,8,108},{0,8,44},{0,9,184},{0,8,12},{0,8,140},{0,8,76}, + {0,9,248},{16,7,3},{0,8,82},{0,8,18},{21,8,163},{19,7,35},{0,8,114}, + {0,8,50},{0,9,196},{17,7,11},{0,8,98},{0,8,34},{0,9,164},{0,8,2}, + {0,8,130},{0,8,66},{0,9,228},{16,7,7},{0,8,90},{0,8,26},{0,9,148}, + {20,7,67},{0,8,122},{0,8,58},{0,9,212},{18,7,19},{0,8,106},{0,8,42}, + {0,9,180},{0,8,10},{0,8,138},{0,8,74},{0,9,244},{16,7,5},{0,8,86}, + {0,8,22},{64,8,0},{19,7,51},{0,8,118},{0,8,54},{0,9,204},{17,7,15}, + {0,8,102},{0,8,38},{0,9,172},{0,8,6},{0,8,134},{0,8,70},{0,9,236}, + {16,7,9},{0,8,94},{0,8,30},{0,9,156},{20,7,99},{0,8,126},{0,8,62}, + {0,9,220},{18,7,27},{0,8,110},{0,8,46},{0,9,188},{0,8,14},{0,8,142}, + {0,8,78},{0,9,252},{96,7,0},{0,8,81},{0,8,17},{21,8,131},{18,7,31}, + {0,8,113},{0,8,49},{0,9,194},{16,7,10},{0,8,97},{0,8,33},{0,9,162}, + {0,8,1},{0,8,129},{0,8,65},{0,9,226},{16,7,6},{0,8,89},{0,8,25}, + {0,9,146},{19,7,59},{0,8,121},{0,8,57},{0,9,210},{17,7,17},{0,8,105}, + {0,8,41},{0,9,178},{0,8,9},{0,8,137},{0,8,73},{0,9,242},{16,7,4}, + {0,8,85},{0,8,21},{16,8,258},{19,7,43},{0,8,117},{0,8,53},{0,9,202}, + {17,7,13},{0,8,101},{0,8,37},{0,9,170},{0,8,5},{0,8,133},{0,8,69}, + {0,9,234},{16,7,8},{0,8,93},{0,8,29},{0,9,154},{20,7,83},{0,8,125}, + {0,8,61},{0,9,218},{18,7,23},{0,8,109},{0,8,45},{0,9,186},{0,8,13}, + {0,8,141},{0,8,77},{0,9,250},{16,7,3},{0,8,83},{0,8,19},{21,8,195}, + {19,7,35},{0,8,115},{0,8,51},{0,9,198},{17,7,11},{0,8,99},{0,8,35}, + {0,9,166},{0,8,3},{0,8,131},{0,8,67},{0,9,230},{16,7,7},{0,8,91}, + {0,8,27},{0,9,150},{20,7,67},{0,8,123},{0,8,59},{0,9,214},{18,7,19}, + {0,8,107},{0,8,43},{0,9,182},{0,8,11},{0,8,139},{0,8,75},{0,9,246}, + {16,7,5},{0,8,87},{0,8,23},{64,8,0},{19,7,51},{0,8,119},{0,8,55}, + {0,9,206},{17,7,15},{0,8,103},{0,8,39},{0,9,174},{0,8,7},{0,8,135}, + {0,8,71},{0,9,238},{16,7,9},{0,8,95},{0,8,31},{0,9,158},{20,7,99}, + {0,8,127},{0,8,63},{0,9,222},{18,7,27},{0,8,111},{0,8,47},{0,9,190}, + {0,8,15},{0,8,143},{0,8,79},{0,9,254},{96,7,0},{0,8,80},{0,8,16}, + {20,8,115},{18,7,31},{0,8,112},{0,8,48},{0,9,193},{16,7,10},{0,8,96}, + {0,8,32},{0,9,161},{0,8,0},{0,8,128},{0,8,64},{0,9,225},{16,7,6}, + {0,8,88},{0,8,24},{0,9,145},{19,7,59},{0,8,120},{0,8,56},{0,9,209}, + {17,7,17},{0,8,104},{0,8,40},{0,9,177},{0,8,8},{0,8,136},{0,8,72}, + {0,9,241},{16,7,4},{0,8,84},{0,8,20},{21,8,227},{19,7,43},{0,8,116}, + {0,8,52},{0,9,201},{17,7,13},{0,8,100},{0,8,36},{0,9,169},{0,8,4}, + {0,8,132},{0,8,68},{0,9,233},{16,7,8},{0,8,92},{0,8,28},{0,9,153}, + {20,7,83},{0,8,124},{0,8,60},{0,9,217},{18,7,23},{0,8,108},{0,8,44}, + {0,9,185},{0,8,12},{0,8,140},{0,8,76},{0,9,249},{16,7,3},{0,8,82}, + {0,8,18},{21,8,163},{19,7,35},{0,8,114},{0,8,50},{0,9,197},{17,7,11}, + {0,8,98},{0,8,34},{0,9,165},{0,8,2},{0,8,130},{0,8,66},{0,9,229}, + {16,7,7},{0,8,90},{0,8,26},{0,9,149},{20,7,67},{0,8,122},{0,8,58}, + {0,9,213},{18,7,19},{0,8,106},{0,8,42},{0,9,181},{0,8,10},{0,8,138}, + {0,8,74},{0,9,245},{16,7,5},{0,8,86},{0,8,22},{64,8,0},{19,7,51}, + {0,8,118},{0,8,54},{0,9,205},{17,7,15},{0,8,102},{0,8,38},{0,9,173}, + {0,8,6},{0,8,134},{0,8,70},{0,9,237},{16,7,9},{0,8,94},{0,8,30}, + {0,9,157},{20,7,99},{0,8,126},{0,8,62},{0,9,221},{18,7,27},{0,8,110}, + {0,8,46},{0,9,189},{0,8,14},{0,8,142},{0,8,78},{0,9,253},{96,7,0}, + {0,8,81},{0,8,17},{21,8,131},{18,7,31},{0,8,113},{0,8,49},{0,9,195}, + {16,7,10},{0,8,97},{0,8,33},{0,9,163},{0,8,1},{0,8,129},{0,8,65}, + {0,9,227},{16,7,6},{0,8,89},{0,8,25},{0,9,147},{19,7,59},{0,8,121}, + {0,8,57},{0,9,211},{17,7,17},{0,8,105},{0,8,41},{0,9,179},{0,8,9}, + {0,8,137},{0,8,73},{0,9,243},{16,7,4},{0,8,85},{0,8,21},{16,8,258}, + {19,7,43},{0,8,117},{0,8,53},{0,9,203},{17,7,13},{0,8,101},{0,8,37}, + {0,9,171},{0,8,5},{0,8,133},{0,8,69},{0,9,235},{16,7,8},{0,8,93}, + {0,8,29},{0,9,155},{20,7,83},{0,8,125},{0,8,61},{0,9,219},{18,7,23}, + {0,8,109},{0,8,45},{0,9,187},{0,8,13},{0,8,141},{0,8,77},{0,9,251}, + {16,7,3},{0,8,83},{0,8,19},{21,8,195},{19,7,35},{0,8,115},{0,8,51}, + {0,9,199},{17,7,11},{0,8,99},{0,8,35},{0,9,167},{0,8,3},{0,8,131}, + {0,8,67},{0,9,231},{16,7,7},{0,8,91},{0,8,27},{0,9,151},{20,7,67}, + {0,8,123},{0,8,59},{0,9,215},{18,7,19},{0,8,107},{0,8,43},{0,9,183}, + {0,8,11},{0,8,139},{0,8,75},{0,9,247},{16,7,5},{0,8,87},{0,8,23}, + {64,8,0},{19,7,51},{0,8,119},{0,8,55},{0,9,207},{17,7,15},{0,8,103}, + {0,8,39},{0,9,175},{0,8,7},{0,8,135},{0,8,71},{0,9,239},{16,7,9}, + {0,8,95},{0,8,31},{0,9,159},{20,7,99},{0,8,127},{0,8,63},{0,9,223}, + {18,7,27},{0,8,111},{0,8,47},{0,9,191},{0,8,15},{0,8,143},{0,8,79}, + {0,9,255} + }; + + static const code distfix[32] = { + {16,5,1},{23,5,257},{19,5,17},{27,5,4097},{17,5,5},{25,5,1025}, + {21,5,65},{29,5,16385},{16,5,3},{24,5,513},{20,5,33},{28,5,8193}, + {18,5,9},{26,5,2049},{22,5,129},{64,5,0},{16,5,2},{23,5,385}, + {19,5,25},{27,5,6145},{17,5,7},{25,5,1537},{21,5,97},{29,5,24577}, + {16,5,4},{24,5,769},{20,5,49},{28,5,12289},{18,5,13},{26,5,3073}, + {22,5,193},{64,5,0} + }; diff --git a/lib/zlib/inflate.c b/lib/zlib/inflate.c new file mode 100644 index 0000000..1eef609 --- /dev/null +++ b/lib/zlib/inflate.c @@ -0,0 +1,956 @@ +/* inflate.c -- zlib decompression + * Copyright (C) 1995-2005 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ +local void fixedtables OF((struct inflate_state FAR *state)); +local int updatewindow OF((z_streamp strm, unsigned out)); + +int ZEXPORT inflateReset(strm) +z_streamp strm; +{ + struct inflate_state FAR *state; + + if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; + state = (struct inflate_state FAR *)strm->state; + strm->total_in = strm->total_out = state->total = 0; + strm->msg = Z_NULL; + strm->adler = 1; /* to support ill-conceived Java test suite */ + state->mode = HEAD; + state->last = 0; + state->havedict = 0; + state->dmax = 32768U; + state->head = Z_NULL; + state->wsize = 0; + state->whave = 0; + state->write = 0; + state->hold = 0; + state->bits = 0; + state->lencode = state->distcode = state->next = state->codes; + WATCHDOG_RESET(); + Tracev((stderr, "inflate: reset\n")); + return Z_OK; +} + +int ZEXPORT inflateInit2_(strm, windowBits, version, stream_size) +z_streamp strm; +int windowBits; +const char *version; +int stream_size; +{ + struct inflate_state FAR *state; + + if (version == Z_NULL || version[0] != ZLIB_VERSION[0] || + stream_size != (int)(sizeof(z_stream))) + return Z_VERSION_ERROR; + if (strm == Z_NULL) return Z_STREAM_ERROR; + strm->msg = Z_NULL; /* in case we return an error */ + if (strm->zalloc == (alloc_func)0) { + strm->zalloc = zcalloc; + strm->opaque = (voidpf)0; + } + if (strm->zfree == (free_func)0) strm->zfree = zcfree; + state = (struct inflate_state FAR *) + ZALLOC(strm, 1, sizeof(struct inflate_state)); + if (state == Z_NULL) return Z_MEM_ERROR; + Tracev((stderr, "inflate: allocated\n")); + strm->state = (struct internal_state FAR *)state; + if (windowBits < 0) { + state->wrap = 0; + windowBits = -windowBits; + } + else { + state->wrap = (windowBits >> 4) + 1; +#ifdef GUNZIP + if (windowBits < 48) windowBits &= 15; +#endif + } + if (windowBits < 8 || windowBits > 15) { + ZFREE(strm, state); + strm->state = Z_NULL; + return Z_STREAM_ERROR; + } + state->wbits = (unsigned)windowBits; + state->window = Z_NULL; + return inflateReset(strm); +} + +int ZEXPORT inflateInit_(strm, version, stream_size) +z_streamp strm; +const char *version; +int stream_size; +{ + return inflateInit2_(strm, DEF_WBITS, version, stream_size); +} + +local void fixedtables(state) +struct inflate_state FAR *state; +{ + state->lencode = lenfix; + state->lenbits = 9; + state->distcode = distfix; + state->distbits = 5; +} + +/* + Update the window with the last wsize (normally 32K) bytes written before + returning. If window does not exist yet, create it. This is only called + when a window is already in use, or when output has been written during this + inflate call, but the end of the deflate stream has not been reached yet. + It is also called to create a window for dictionary data when a dictionary + is loaded. + + Providing output buffers larger than 32K to inflate() should provide a speed + advantage, since only the last 32K of output is copied to the sliding window + upon return from inflate(), and since all distances after the first 32K of + output will fall in the output data, making match copies simpler and faster. + The advantage may be dependent on the size of the processor's data caches. + */ +local int updatewindow(strm, out) +z_streamp strm; +unsigned out; +{ + struct inflate_state FAR *state; + unsigned copy, dist; + + state = (struct inflate_state FAR *)strm->state; + + /* if it hasn't been done already, allocate space for the window */ + if (state->window == Z_NULL) { + state->window = (unsigned char FAR *) + ZALLOC(strm, 1U << state->wbits, + sizeof(unsigned char)); + if (state->window == Z_NULL) return 1; + } + + /* if window not in use yet, initialize */ + if (state->wsize == 0) { + state->wsize = 1U << state->wbits; + state->write = 0; + state->whave = 0; + } + + /* copy state->wsize or less output bytes into the circular window */ + copy = out - strm->avail_out; + if (copy >= state->wsize) { + zmemcpy(state->window, strm->next_out - state->wsize, state->wsize); + state->write = 0; + state->whave = state->wsize; + } + else { + dist = state->wsize - state->write; + if (dist > copy) dist = copy; + zmemcpy(state->window + state->write, strm->next_out - copy, dist); + copy -= dist; + if (copy) { + zmemcpy(state->window, strm->next_out - copy, copy); + state->write = copy; + state->whave = state->wsize; + } + else { + state->write += dist; + if (state->write == state->wsize) state->write = 0; + if (state->whave < state->wsize) state->whave += dist; + } + } + return 0; +} + +/* Macros for inflate(): */ + +/* check function to use adler32() for zlib or crc32() for gzip */ +#ifdef GUNZIP +# define UPDATE(check, buf, len) \ + (state->flags ? crc32(check, buf, len) : adler32(check, buf, len)) +#else +# define UPDATE(check, buf, len) adler32(check, buf, len) +#endif + +/* check macros for header crc */ +#ifdef GUNZIP +# define CRC2(check, word) \ + do { \ + hbuf[0] = (unsigned char)(word); \ + hbuf[1] = (unsigned char)((word) >> 8); \ + check = crc32(check, hbuf, 2); \ + } while (0) + +# define CRC4(check, word) \ + do { \ + hbuf[0] = (unsigned char)(word); \ + hbuf[1] = (unsigned char)((word) >> 8); \ + hbuf[2] = (unsigned char)((word) >> 16); \ + hbuf[3] = (unsigned char)((word) >> 24); \ + check = crc32(check, hbuf, 4); \ + } while (0) +#endif + +/* Load registers with state in inflate() for speed */ +#define LOAD() \ + do { \ + put = strm->next_out; \ + left = strm->avail_out; \ + next = strm->next_in; \ + have = strm->avail_in; \ + hold = state->hold; \ + bits = state->bits; \ + } while (0) + +/* Restore state from registers in inflate() */ +#define RESTORE() \ + do { \ + strm->next_out = put; \ + strm->avail_out = left; \ + strm->next_in = next; \ + strm->avail_in = have; \ + state->hold = hold; \ + state->bits = bits; \ + } while (0) + +/* Clear the input bit accumulator */ +#define INITBITS() \ + do { \ + hold = 0; \ + bits = 0; \ + } while (0) + +/* Get a byte of input into the bit accumulator, or return from inflate() + if there is no input available. */ +#define PULLBYTE() \ + do { \ + if (have == 0) goto inf_leave; \ + have--; \ + hold += (unsigned long)(*next++) << bits; \ + bits += 8; \ + } while (0) + +/* Assure that there are at least n bits in the bit accumulator. If there is + not enough available input to do that, then return from inflate(). */ +#define NEEDBITS(n) \ + do { \ + while (bits < (unsigned)(n)) \ + PULLBYTE(); \ + } while (0) + +/* Return the low n bits of the bit accumulator (n < 16) */ +#define BITS(n) \ + ((unsigned)hold & ((1U << (n)) - 1)) + +/* Remove n bits from the bit accumulator */ +#define DROPBITS(n) \ + do { \ + hold >>= (n); \ + bits -= (unsigned)(n); \ + } while (0) + +/* Remove zero to seven bits as needed to go to a byte boundary */ +#define BYTEBITS() \ + do { \ + hold >>= bits & 7; \ + bits -= bits & 7; \ + } while (0) + +/* Reverse the bytes in a 32-bit value */ +#define REVERSE(q) \ + ((((q) >> 24) & 0xff) + (((q) >> 8) & 0xff00) + \ + (((q) & 0xff00) << 8) + (((q) & 0xff) << 24)) + +/* + inflate() uses a state machine to process as much input data and generate as + much output data as possible before returning. The state machine is + structured roughly as follows: + + for (;;) switch (state) { + ... + case STATEn: + if (not enough input data or output space to make progress) + return; + ... make progress ... + state = STATEm; + break; + ... + } + + so when inflate() is called again, the same case is attempted again, and + if the appropriate resources are provided, the machine proceeds to the + next state. The NEEDBITS() macro is usually the way the state evaluates + whether it can proceed or should return. NEEDBITS() does the return if + the requested bits are not available. The typical use of the BITS macros + is: + + NEEDBITS(n); + ... do something with BITS(n) ... + DROPBITS(n); + + where NEEDBITS(n) either returns from inflate() if there isn't enough + input left to load n bits into the accumulator, or it continues. BITS(n) + gives the low n bits in the accumulator. When done, DROPBITS(n) drops + the low n bits off the accumulator. INITBITS() clears the accumulator + and sets the number of available bits to zero. BYTEBITS() discards just + enough bits to put the accumulator on a byte boundary. After BYTEBITS() + and a NEEDBITS(8), then BITS(8) would return the next byte in the stream. + + NEEDBITS(n) uses PULLBYTE() to get an available byte of input, or to return + if there is no input available. The decoding of variable length codes uses + PULLBYTE() directly in order to pull just enough bytes to decode the next + code, and no more. + + Some states loop until they get enough input, making sure that enough + state information is maintained to continue the loop where it left off + if NEEDBITS() returns in the loop. For example, want, need, and keep + would all have to actually be part of the saved state in case NEEDBITS() + returns: + + case STATEw: + while (want < need) { + NEEDBITS(n); + keep[want++] = BITS(n); + DROPBITS(n); + } + state = STATEx; + case STATEx: + + As shown above, if the next state is also the next case, then the break + is omitted. + + A state may also return if there is not enough output space available to + complete that state. Those states are copying stored data, writing a + literal byte, and copying a matching string. + + When returning, a "goto inf_leave" is used to update the total counters, + update the check value, and determine whether any progress has been made + during that inflate() call in order to return the proper return code. + Progress is defined as a change in either strm->avail_in or strm->avail_out. + When there is a window, goto inf_leave will update the window with the last + output written. If a goto inf_leave occurs in the middle of decompression + and there is no window currently, goto inf_leave will create one and copy + output to the window for the next call of inflate(). + + In this implementation, the flush parameter of inflate() only affects the + return code (per zlib.h). inflate() always writes as much as possible to + strm->next_out, given the space available and the provided input--the effect + documented in zlib.h of Z_SYNC_FLUSH. Furthermore, inflate() always defers + the allocation of and copying into a sliding window until necessary, which + provides the effect documented in zlib.h for Z_FINISH when the entire input + stream available. So the only thing the flush parameter actually does is: + when flush is set to Z_FINISH, inflate() cannot return Z_OK. Instead it + will return Z_BUF_ERROR if it has not reached the end of the stream. + */ +int ZEXPORT inflate(strm, flush) +z_streamp strm; +int flush; +{ + struct inflate_state FAR *state; + unsigned char FAR *next; /* next input */ + unsigned char FAR *put; /* next output */ + unsigned have, left; /* available input and output */ + unsigned long hold; /* bit buffer */ + unsigned bits; /* bits in bit buffer */ + unsigned in, out; /* save starting available input and output */ + unsigned copy; /* number of stored or match bytes to copy */ + unsigned char FAR *from; /* where to copy match bytes from */ + code this; /* current decoding table entry */ + code last; /* parent table entry */ + unsigned len; /* length to copy for repeats, bits to drop */ + int ret; /* return code */ +#ifdef GUNZIP + unsigned char hbuf[4]; /* buffer for gzip header crc calculation */ +#endif + static const unsigned short order[19] = /* permutation of code lengths */ + {16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15}; + + if (strm == Z_NULL || strm->state == Z_NULL || + (strm->next_in == Z_NULL && strm->avail_in != 0)) + return Z_STREAM_ERROR; + + state = (struct inflate_state FAR *)strm->state; + if (state->mode == TYPE) state->mode = TYPEDO; /* skip check */ + LOAD(); + in = have; + out = left; + ret = Z_OK; + for (;;) + switch (state->mode) { + case HEAD: + if (state->wrap == 0) { + state->mode = TYPEDO; + break; + } + NEEDBITS(16); +#ifdef GUNZIP + if ((state->wrap & 2) && hold == 0x8b1f) { /* gzip header */ + state->check = crc32(0L, Z_NULL, 0); + CRC2(state->check, hold); + INITBITS(); + state->mode = FLAGS; + break; + } + state->flags = 0; /* expect zlib header */ + if (state->head != Z_NULL) + state->head->done = -1; + if (!(state->wrap & 1) || /* check if zlib header allowed */ +#else + if ( +#endif + ((BITS(8) << 8) + (hold >> 8)) % 31) { + strm->msg = (char *)"incorrect header check"; + state->mode = BAD; + break; + } + if (BITS(4) != Z_DEFLATED) { + strm->msg = (char *)"unknown compression method"; + state->mode = BAD; + break; + } + DROPBITS(4); + len = BITS(4) + 8; + if (len > state->wbits) { + strm->msg = (char *)"invalid window size"; + state->mode = BAD; + break; + } + state->dmax = 1U << len; + Tracev((stderr, "inflate: zlib header ok\n")); + strm->adler = state->check = adler32(0L, Z_NULL, 0); + state->mode = hold & 0x200 ? DICTID : TYPE; + INITBITS(); + break; +#ifdef GUNZIP + case FLAGS: + NEEDBITS(16); + state->flags = (int)(hold); + if ((state->flags & 0xff) != Z_DEFLATED) { + strm->msg = (char *)"unknown compression method"; + state->mode = BAD; + break; + } + if (state->flags & 0xe000) { + strm->msg = (char *)"unknown header flags set"; + state->mode = BAD; + break; + } + if (state->head != Z_NULL) + state->head->text = (int)((hold >> 8) & 1); + if (state->flags & 0x0200) CRC2(state->check, hold); + INITBITS(); + state->mode = TIME; + case TIME: + NEEDBITS(32); + if (state->head != Z_NULL) + state->head->time = hold; + if (state->flags & 0x0200) CRC4(state->check, hold); + INITBITS(); + state->mode = OS; + case OS: + NEEDBITS(16); + if (state->head != Z_NULL) { + state->head->xflags = (int)(hold & 0xff); + state->head->os = (int)(hold >> 8); + } + if (state->flags & 0x0200) CRC2(state->check, hold); + INITBITS(); + state->mode = EXLEN; + case EXLEN: + if (state->flags & 0x0400) { + NEEDBITS(16); + state->length = (unsigned)(hold); + if (state->head != Z_NULL) + state->head->extra_len = (unsigned)hold; + if (state->flags & 0x0200) CRC2(state->check, hold); + INITBITS(); + } + else if (state->head != Z_NULL) + state->head->extra = Z_NULL; + state->mode = EXTRA; + case EXTRA: + if (state->flags & 0x0400) { + copy = state->length; + if (copy > have) copy = have; + if (copy) { + if (state->head != Z_NULL && + state->head->extra != Z_NULL) { + len = state->head->extra_len - state->length; + zmemcpy(state->head->extra + len, next, + len + copy > state->head->extra_max ? + state->head->extra_max - len : copy); + } + if (state->flags & 0x0200) + state->check = crc32(state->check, next, copy); + have -= copy; + next += copy; + state->length -= copy; + } + if (state->length) goto inf_leave; + } + state->length = 0; + state->mode = NAME; + case NAME: + if (state->flags & 0x0800) { + if (have == 0) goto inf_leave; + copy = 0; + do { + len = (unsigned)(next[copy++]); + if (state->head != Z_NULL && + state->head->name != Z_NULL && + state->length < state->head->name_max) + state->head->name[state->length++] = len; + } while (len && copy < have); + if (state->flags & 0x0200) + state->check = crc32(state->check, next, copy); + have -= copy; + next += copy; + if (len) goto inf_leave; + } + else if (state->head != Z_NULL) + state->head->name = Z_NULL; + state->length = 0; + state->mode = COMMENT; + case COMMENT: + if (state->flags & 0x1000) { + if (have == 0) goto inf_leave; + copy = 0; + do { + len = (unsigned)(next[copy++]); + if (state->head != Z_NULL && + state->head->comment != Z_NULL && + state->length < state->head->comm_max) + state->head->comment[state->length++] = len; + } while (len && copy < have); + if (state->flags & 0x0200) + state->check = crc32(state->check, next, copy); + have -= copy; + next += copy; + if (len) goto inf_leave; + } + else if (state->head != Z_NULL) + state->head->comment = Z_NULL; + state->mode = HCRC; + case HCRC: + if (state->flags & 0x0200) { + NEEDBITS(16); + if (hold != (state->check & 0xffff)) { + strm->msg = (char *)"header crc mismatch"; + state->mode = BAD; + break; + } + INITBITS(); + } + if (state->head != Z_NULL) { + state->head->hcrc = (int)((state->flags >> 9) & 1); + state->head->done = 1; + } + strm->adler = state->check = crc32(0L, Z_NULL, 0); + state->mode = TYPE; + break; +#endif + case DICTID: + NEEDBITS(32); + strm->adler = state->check = REVERSE(hold); + INITBITS(); + state->mode = DICT; + case DICT: + if (state->havedict == 0) { + RESTORE(); + return Z_NEED_DICT; + } + strm->adler = state->check = adler32(0L, Z_NULL, 0); + state->mode = TYPE; + case TYPE: + WATCHDOG_RESET(); + if (flush == Z_BLOCK) goto inf_leave; + case TYPEDO: + if (state->last) { + BYTEBITS(); + state->mode = CHECK; + break; + } + NEEDBITS(3); + state->last = BITS(1); + DROPBITS(1); + switch (BITS(2)) { + case 0: /* stored block */ + Tracev((stderr, "inflate: stored block%s\n", + state->last ? " (last)" : "")); + state->mode = STORED; + break; + case 1: /* fixed block */ + fixedtables(state); + Tracev((stderr, "inflate: fixed codes block%s\n", + state->last ? " (last)" : "")); + state->mode = LEN; /* decode codes */ + break; + case 2: /* dynamic block */ + Tracev((stderr, "inflate: dynamic codes block%s\n", + state->last ? " (last)" : "")); + state->mode = TABLE; + break; + case 3: + strm->msg = (char *)"invalid block type"; + state->mode = BAD; + } + DROPBITS(2); + break; + case STORED: + BYTEBITS(); /* go to byte boundary */ + NEEDBITS(32); + if ((hold & 0xffff) != ((hold >> 16) ^ 0xffff)) { + strm->msg = (char *)"invalid stored block lengths"; + state->mode = BAD; + break; + } + state->length = (unsigned)hold & 0xffff; + Tracev((stderr, "inflate: stored length %u\n", + state->length)); + INITBITS(); + state->mode = COPY; + case COPY: + copy = state->length; + if (copy) { + if (copy > have) copy = have; + if (copy > left) copy = left; + if (copy == 0) goto inf_leave; + zmemcpy(put, next, copy); + have -= copy; + next += copy; + left -= copy; + put += copy; + state->length -= copy; + break; + } + Tracev((stderr, "inflate: stored end\n")); + state->mode = TYPE; + break; + case TABLE: + NEEDBITS(14); + state->nlen = BITS(5) + 257; + DROPBITS(5); + state->ndist = BITS(5) + 1; + DROPBITS(5); + state->ncode = BITS(4) + 4; + DROPBITS(4); +#ifndef PKZIP_BUG_WORKAROUND + if (state->nlen > 286 || state->ndist > 30) { + strm->msg = (char *)"too many length or distance symbols"; + state->mode = BAD; + break; + } +#endif + Tracev((stderr, "inflate: table sizes ok\n")); + state->have = 0; + state->mode = LENLENS; + case LENLENS: + while (state->have < state->ncode) { + NEEDBITS(3); + state->lens[order[state->have++]] = (unsigned short)BITS(3); + DROPBITS(3); + } + while (state->have < 19) + state->lens[order[state->have++]] = 0; + state->next = state->codes; + state->lencode = (code const FAR *)(state->next); + state->lenbits = 7; + ret = inflate_table(CODES, state->lens, 19, &(state->next), + &(state->lenbits), state->work); + if (ret) { + strm->msg = (char *)"invalid code lengths set"; + state->mode = BAD; + break; + } + Tracev((stderr, "inflate: code lengths ok\n")); + state->have = 0; + state->mode = CODELENS; + case CODELENS: + while (state->have < state->nlen + state->ndist) { + for (;;) { + this = state->lencode[BITS(state->lenbits)]; + if ((unsigned)(this.bits) <= bits) break; + PULLBYTE(); + } + if (this.val < 16) { + NEEDBITS(this.bits); + DROPBITS(this.bits); + state->lens[state->have++] = this.val; + } + else { + if (this.val == 16) { + NEEDBITS(this.bits + 2); + DROPBITS(this.bits); + if (state->have == 0) { + strm->msg = (char *)"invalid bit length repeat"; + state->mode = BAD; + break; + } + len = state->lens[state->have - 1]; + copy = 3 + BITS(2); + DROPBITS(2); + } + else if (this.val == 17) { + NEEDBITS(this.bits + 3); + DROPBITS(this.bits); + len = 0; + copy = 3 + BITS(3); + DROPBITS(3); + } + else { + NEEDBITS(this.bits + 7); + DROPBITS(this.bits); + len = 0; + copy = 11 + BITS(7); + DROPBITS(7); + } + if (state->have + copy > state->nlen + state->ndist) { + strm->msg = (char *)"invalid bit length repeat"; + state->mode = BAD; + break; + } + while (copy--) + state->lens[state->have++] = (unsigned short)len; + } + } + + /* handle error breaks in while */ + if (state->mode == BAD) break; + + /* build code tables */ + state->next = state->codes; + state->lencode = (code const FAR *)(state->next); + state->lenbits = 9; + ret = inflate_table(LENS, state->lens, state->nlen, &(state->next), + &(state->lenbits), state->work); + if (ret) { + strm->msg = (char *)"invalid literal/lengths set"; + state->mode = BAD; + break; + } + state->distcode = (code const FAR *)(state->next); + state->distbits = 6; + ret = inflate_table(DISTS, state->lens + state->nlen, state->ndist, + &(state->next), &(state->distbits), state->work); + if (ret) { + strm->msg = (char *)"invalid distances set"; + state->mode = BAD; + break; + } + Tracev((stderr, "inflate: codes ok\n")); + state->mode = LEN; + case LEN: + WATCHDOG_RESET(); + if (have >= 6 && left >= 258) { + RESTORE(); + inflate_fast(strm, out); + LOAD(); + break; + } + for (;;) { + this = state->lencode[BITS(state->lenbits)]; + if ((unsigned)(this.bits) <= bits) break; + PULLBYTE(); + } + if (this.op && (this.op & 0xf0) == 0) { + last = this; + for (;;) { + this = state->lencode[last.val + + (BITS(last.bits + last.op) >> last.bits)]; + if ((unsigned)(last.bits + this.bits) <= bits) break; + PULLBYTE(); + } + DROPBITS(last.bits); + } + DROPBITS(this.bits); + state->length = (unsigned)this.val; + if ((int)(this.op) == 0) { + Tracevv((stderr, this.val >= 0x20 && this.val < 0x7f ? + "inflate: literal '%c'\n" : + "inflate: literal 0x%02x\n", this.val)); + state->mode = LIT; + break; + } + if (this.op & 32) { + Tracevv((stderr, "inflate: end of block\n")); + state->mode = TYPE; + break; + } + if (this.op & 64) { + strm->msg = (char *)"invalid literal/length code"; + state->mode = BAD; + break; + } + state->extra = (unsigned)(this.op) & 15; + state->mode = LENEXT; + case LENEXT: + if (state->extra) { + NEEDBITS(state->extra); + state->length += BITS(state->extra); + DROPBITS(state->extra); + } + Tracevv((stderr, "inflate: length %u\n", state->length)); + state->mode = DIST; + case DIST: + for (;;) { + this = state->distcode[BITS(state->distbits)]; + if ((unsigned)(this.bits) <= bits) break; + PULLBYTE(); + } + if ((this.op & 0xf0) == 0) { + last = this; + for (;;) { + this = state->distcode[last.val + + (BITS(last.bits + last.op) >> last.bits)]; + if ((unsigned)(last.bits + this.bits) <= bits) break; + PULLBYTE(); + } + DROPBITS(last.bits); + } + DROPBITS(this.bits); + if (this.op & 64) { + strm->msg = (char *)"invalid distance code"; + state->mode = BAD; + break; + } + state->offset = (unsigned)this.val; + state->extra = (unsigned)(this.op) & 15; + state->mode = DISTEXT; + case DISTEXT: + if (state->extra) { + NEEDBITS(state->extra); + state->offset += BITS(state->extra); + DROPBITS(state->extra); + } +#ifdef INFLATE_STRICT + if (state->offset > state->dmax) { + strm->msg = (char *)"invalid distance too far back"; + state->mode = BAD; + break; + } +#endif + if (state->offset > state->whave + out - left) { + strm->msg = (char *)"invalid distance too far back"; + state->mode = BAD; + break; + } + Tracevv((stderr, "inflate: distance %u\n", state->offset)); + state->mode = MATCH; + case MATCH: + if (left == 0) goto inf_leave; + copy = out - left; + if (state->offset > copy) { /* copy from window */ + copy = state->offset - copy; + if (copy > state->write) { + copy -= state->write; + from = state->window + (state->wsize - copy); + } + else + from = state->window + (state->write - copy); + if (copy > state->length) copy = state->length; + } + else { /* copy from output */ + from = put - state->offset; + copy = state->length; + } + if (copy > left) copy = left; + left -= copy; + state->length -= copy; + do { + *put++ = *from++; + } while (--copy); + if (state->length == 0) state->mode = LEN; + break; + case LIT: + if (left == 0) goto inf_leave; + *put++ = (unsigned char)(state->length); + left--; + state->mode = LEN; + break; + case CHECK: + if (state->wrap) { + NEEDBITS(32); + out -= left; + strm->total_out += out; + state->total += out; + if (out) + strm->adler = state->check = + UPDATE(state->check, put - out, out); + out = left; + if (( +#ifdef GUNZIP + state->flags ? hold : +#endif + REVERSE(hold)) != state->check) { + strm->msg = (char *)"incorrect data check"; + state->mode = BAD; + break; + } + INITBITS(); + Tracev((stderr, "inflate: check matches trailer\n")); + } +#ifdef GUNZIP + state->mode = LENGTH; + case LENGTH: + if (state->wrap && state->flags) { + NEEDBITS(32); + if (hold != (state->total & 0xffffffffUL)) { + strm->msg = (char *)"incorrect length check"; + state->mode = BAD; + break; + } + INITBITS(); + Tracev((stderr, "inflate: length matches trailer\n")); + } +#endif + state->mode = DONE; + case DONE: + ret = Z_STREAM_END; + goto inf_leave; + case BAD: + ret = Z_DATA_ERROR; + goto inf_leave; + case MEM: + return Z_MEM_ERROR; + case SYNC: + default: + return Z_STREAM_ERROR; + } + + /* + Return from inflate(), updating the total counts and the check value. + If there was no progress during the inflate() call, return a buffer + error. Call updatewindow() to create and/or update the window state. + Note: a memory error from inflate() is non-recoverable. + */ + inf_leave: + RESTORE(); + if (state->wsize || (state->mode < CHECK && out != strm->avail_out)) + if (updatewindow(strm, out)) { + state->mode = MEM; + return Z_MEM_ERROR; + } + in -= strm->avail_in; + out -= strm->avail_out; + strm->total_in += in; + strm->total_out += out; + state->total += out; + if (state->wrap && out) + strm->adler = state->check = + UPDATE(state->check, strm->next_out - out, out); + strm->data_type = state->bits + (state->last ? 64 : 0) + + (state->mode == TYPE ? 128 : 0); + if (((in == 0 && out == 0) || flush == Z_FINISH) && ret == Z_OK) + ret = Z_BUF_ERROR; + return ret; +} + +int ZEXPORT inflateEnd(strm) +z_streamp strm; +{ + struct inflate_state FAR *state; + if (strm == Z_NULL || strm->state == Z_NULL || strm->zfree == (free_func)0) + return Z_STREAM_ERROR; + state = (struct inflate_state FAR *)strm->state; + if (state->window != Z_NULL) { + WATCHDOG_RESET(); + ZFREE(strm, state->window); + } + ZFREE(strm, strm->state); + strm->state = Z_NULL; + Tracev((stderr, "inflate: end\n")); + return Z_OK; +} diff --git a/lib/zlib/inflate.h b/lib/zlib/inflate.h new file mode 100644 index 0000000..07bd3e7 --- /dev/null +++ b/lib/zlib/inflate.h @@ -0,0 +1,115 @@ +/* inflate.h -- internal inflate state definition + * Copyright (C) 1995-2004 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* WARNING: this file should *not* be used by applications. It is + part of the implementation of the compression library and is + subject to change. Applications should only use zlib.h. + */ + +/* define NO_GZIP when compiling if you want to disable gzip header and + trailer decoding by inflate(). NO_GZIP would be used to avoid linking in + the crc code when it is not needed. For shared libraries, gzip decoding + should be left enabled. */ +#ifndef NO_GZIP +# define GUNZIP +#endif + +/* Possible inflate modes between inflate() calls */ +typedef enum { + HEAD, /* i: waiting for magic header */ + FLAGS, /* i: waiting for method and flags (gzip) */ + TIME, /* i: waiting for modification time (gzip) */ + OS, /* i: waiting for extra flags and operating system (gzip) */ + EXLEN, /* i: waiting for extra length (gzip) */ + EXTRA, /* i: waiting for extra bytes (gzip) */ + NAME, /* i: waiting for end of file name (gzip) */ + COMMENT, /* i: waiting for end of comment (gzip) */ + HCRC, /* i: waiting for header crc (gzip) */ + DICTID, /* i: waiting for dictionary check value */ + DICT, /* waiting for inflateSetDictionary() call */ + TYPE, /* i: waiting for type bits, including last-flag bit */ + TYPEDO, /* i: same, but skip check to exit inflate on new block */ + STORED, /* i: waiting for stored size (length and complement) */ + COPY, /* i/o: waiting for input or output to copy stored block */ + TABLE, /* i: waiting for dynamic block table lengths */ + LENLENS, /* i: waiting for code length code lengths */ + CODELENS, /* i: waiting for length/lit and distance code lengths */ + LEN, /* i: waiting for length/lit code */ + LENEXT, /* i: waiting for length extra bits */ + DIST, /* i: waiting for distance code */ + DISTEXT, /* i: waiting for distance extra bits */ + MATCH, /* o: waiting for output space to copy string */ + LIT, /* o: waiting for output space to write literal */ + CHECK, /* i: waiting for 32-bit check value */ + LENGTH, /* i: waiting for 32-bit length (gzip) */ + DONE, /* finished check, done -- remain here until reset */ + BAD, /* got a data error -- remain here until reset */ + MEM, /* got an inflate() memory error -- remain here until reset */ + SYNC /* looking for synchronization bytes to restart inflate() */ +} inflate_mode; + +/* + State transitions between above modes - + + (most modes can go to the BAD or MEM mode -- not shown for clarity) + + Process header: + HEAD -> (gzip) or (zlib) + (gzip) -> FLAGS -> TIME -> OS -> EXLEN -> EXTRA -> NAME + NAME -> COMMENT -> HCRC -> TYPE + (zlib) -> DICTID or TYPE + DICTID -> DICT -> TYPE + Read deflate blocks: + TYPE -> STORED or TABLE or LEN or CHECK + STORED -> COPY -> TYPE + TABLE -> LENLENS -> CODELENS -> LEN + Read deflate codes: + LEN -> LENEXT or LIT or TYPE + LENEXT -> DIST -> DISTEXT -> MATCH -> LEN + LIT -> LEN + Process trailer: + CHECK -> LENGTH -> DONE + */ + +/* state maintained between inflate() calls. Approximately 7K bytes. */ +struct inflate_state { + inflate_mode mode; /* current inflate mode */ + int last; /* true if processing last block */ + int wrap; /* bit 0 true for zlib, bit 1 true for gzip */ + int havedict; /* true if dictionary provided */ + int flags; /* gzip header method and flags (0 if zlib) */ + unsigned dmax; /* zlib header max distance (INFLATE_STRICT) */ + unsigned long check; /* protected copy of check value */ + unsigned long total; /* protected copy of output count */ + gz_headerp head; /* where to save gzip header information */ + /* sliding window */ + unsigned wbits; /* log base 2 of requested window size */ + unsigned wsize; /* window size or zero if not using window */ + unsigned whave; /* valid bytes in the window */ + unsigned write; /* window write index */ + unsigned char FAR *window; /* allocated sliding window, if needed */ + /* bit accumulator */ + unsigned long hold; /* input bit accumulator */ + unsigned bits; /* number of bits in "in" */ + /* for string and stored block copying */ + unsigned length; /* literal or length of data to copy */ + unsigned offset; /* distance back to copy string from */ + /* for table and code decoding */ + unsigned extra; /* extra bits needed */ + /* fixed and dynamic code tables */ + code const FAR *lencode; /* starting table for length/literal codes */ + code const FAR *distcode; /* starting table for distance codes */ + unsigned lenbits; /* index bits for lencode */ + unsigned distbits; /* index bits for distcode */ + /* dynamic table building */ + unsigned ncode; /* number of code length code lengths */ + unsigned nlen; /* number of length code lengths */ + unsigned ndist; /* number of distance code lengths */ + unsigned have; /* number of code lengths in lens[] */ + code FAR *next; /* next available space in codes[] */ + unsigned short lens[320]; /* temporary storage for code lengths */ + unsigned short work[288]; /* work area for code table building */ + code codes[ENOUGH]; /* space for code tables */ +}; diff --git a/lib/zlib/inftrees.c b/lib/zlib/inftrees.c new file mode 100644 index 0000000..c6d4c03 --- /dev/null +++ b/lib/zlib/inftrees.c @@ -0,0 +1,329 @@ +/* inftrees.c -- generate Huffman trees for efficient decoding + * Copyright (C) 1995-2005 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* U-boot: we already included these +#include "zutil.h" +#include "inftrees.h" +*/ + +#define MAXBITS 15 + +/* + If you use the zlib library in a product, an acknowledgment is welcome + in the documentation of your product. If for some reason you cannot + include such an acknowledgment, I would appreciate that you keep this + copyright string in the executable of your product. + */ + +/* + Build a set of tables to decode the provided canonical Huffman code. + The code lengths are lens[0..codes-1]. The result starts at *table, + whose indices are 0..2^bits-1. work is a writable array of at least + lens shorts, which is used as a work area. type is the type of code + to be generated, CODES, LENS, or DISTS. On return, zero is success, + -1 is an invalid code, and +1 means that ENOUGH isn't enough. table + on return points to the next available entry's address. bits is the + requested root table index bits, and on return it is the actual root + table index bits. It will differ if the request is greater than the + longest code or if it is less than the shortest code. + */ +int inflate_table(type, lens, codes, table, bits, work) +codetype type; +unsigned short FAR *lens; +unsigned codes; +code FAR * FAR *table; +unsigned FAR *bits; +unsigned short FAR *work; +{ + unsigned len; /* a code's length in bits */ + unsigned sym; /* index of code symbols */ + unsigned min, max; /* minimum and maximum code lengths */ + unsigned root; /* number of index bits for root table */ + unsigned curr; /* number of index bits for current table */ + unsigned drop; /* code bits to drop for sub-table */ + int left; /* number of prefix codes available */ + unsigned used; /* code entries in table used */ + unsigned huff; /* Huffman code */ + unsigned incr; /* for incrementing code, index */ + unsigned fill; /* index for replicating entries */ + unsigned low; /* low bits for current root entry */ + unsigned mask; /* mask for low root bits */ + code this; /* table entry for duplication */ + code FAR *next; /* next available space in table */ + const unsigned short FAR *base; /* base value table to use */ + const unsigned short FAR *extra; /* extra bits table to use */ + int end; /* use base and extra for symbol > end */ + unsigned short count[MAXBITS+1]; /* number of codes of each length */ + unsigned short offs[MAXBITS+1]; /* offsets in table for each length */ + static const unsigned short lbase[31] = { /* Length codes 257..285 base */ + 3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31, + 35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0}; + static const unsigned short lext[31] = { /* Length codes 257..285 extra */ + 16, 16, 16, 16, 16, 16, 16, 16, 17, 17, 17, 17, 18, 18, 18, 18, + 19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 201, 196}; + static const unsigned short dbase[32] = { /* Distance codes 0..29 base */ + 1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193, + 257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145, + 8193, 12289, 16385, 24577, 0, 0}; + static const unsigned short dext[32] = { /* Distance codes 0..29 extra */ + 16, 16, 16, 16, 17, 17, 18, 18, 19, 19, 20, 20, 21, 21, 22, 22, + 23, 23, 24, 24, 25, 25, 26, 26, 27, 27, + 28, 28, 29, 29, 64, 64}; + + /* + Process a set of code lengths to create a canonical Huffman code. The + code lengths are lens[0..codes-1]. Each length corresponds to the + symbols 0..codes-1. The Huffman code is generated by first sorting the + symbols by length from short to long, and retaining the symbol order + for codes with equal lengths. Then the code starts with all zero bits + for the first code of the shortest length, and the codes are integer + increments for the same length, and zeros are appended as the length + increases. For the deflate format, these bits are stored backwards + from their more natural integer increment ordering, and so when the + decoding tables are built in the large loop below, the integer codes + are incremented backwards. + + This routine assumes, but does not check, that all of the entries in + lens[] are in the range 0..MAXBITS. The caller must assure this. + 1..MAXBITS is interpreted as that code length. zero means that that + symbol does not occur in this code. + + The codes are sorted by computing a count of codes for each length, + creating from that a table of starting indices for each length in the + sorted table, and then entering the symbols in order in the sorted + table. The sorted table is work[], with that space being provided by + the caller. + + The length counts are used for other purposes as well, i.e. finding + the minimum and maximum length codes, determining if there are any + codes at all, checking for a valid set of lengths, and looking ahead + at length counts to determine sub-table sizes when building the + decoding tables. + */ + + /* accumulate lengths for codes (assumes lens[] all in 0..MAXBITS) */ + for (len = 0; len <= MAXBITS; len++) + count[len] = 0; + for (sym = 0; sym < codes; sym++) + count[lens[sym]]++; + + /* bound code lengths, force root to be within code lengths */ + root = *bits; + for (max = MAXBITS; max >= 1; max--) + if (count[max] != 0) break; + if (root > max) root = max; + if (max == 0) { /* no symbols to code at all */ + this.op = (unsigned char)64; /* invalid code marker */ + this.bits = (unsigned char)1; + this.val = (unsigned short)0; + *(*table)++ = this; /* make a table to force an error */ + *(*table)++ = this; + *bits = 1; + return 0; /* no symbols, but wait for decoding to report error */ + } + for (min = 1; min <= MAXBITS; min++) + if (count[min] != 0) break; + if (root < min) root = min; + + /* check for an over-subscribed or incomplete set of lengths */ + left = 1; + for (len = 1; len <= MAXBITS; len++) { + left <<= 1; + left -= count[len]; + if (left < 0) return -1; /* over-subscribed */ + } + if (left > 0 && (type == CODES || max != 1)) + return -1; /* incomplete set */ + + /* generate offsets into symbol table for each length for sorting */ + offs[1] = 0; + for (len = 1; len < MAXBITS; len++) + offs[len + 1] = offs[len] + count[len]; + + /* sort symbols by length, by symbol order within each length */ + for (sym = 0; sym < codes; sym++) + if (lens[sym] != 0) work[offs[lens[sym]]++] = (unsigned short)sym; + + /* + Create and fill in decoding tables. In this loop, the table being + filled is at next and has curr index bits. The code being used is huff + with length len. That code is converted to an index by dropping drop + bits off of the bottom. For codes where len is less than drop + curr, + those top drop + curr - len bits are incremented through all values to + fill the table with replicated entries. + + root is the number of index bits for the root table. When len exceeds + root, sub-tables are created pointed to by the root entry with an index + of the low root bits of huff. This is saved in low to check for when a + new sub-table should be started. drop is zero when the root table is + being filled, and drop is root when sub-tables are being filled. + + When a new sub-table is needed, it is necessary to look ahead in the + code lengths to determine what size sub-table is needed. The length + counts are used for this, and so count[] is decremented as codes are + entered in the tables. + + used keeps track of how many table entries have been allocated from the + provided *table space. It is checked when a LENS table is being made + against the space in *table, ENOUGH, minus the maximum space needed by + the worst case distance code, MAXD. This should never happen, but the + sufficiency of ENOUGH has not been proven exhaustively, hence the check. + This assumes that when type == LENS, bits == 9. + + sym increments through all symbols, and the loop terminates when + all codes of length max, i.e. all codes, have been processed. This + routine permits incomplete codes, so another loop after this one fills + in the rest of the decoding tables with invalid code markers. + */ + + /* set up for code type */ + switch (type) { + case CODES: + base = extra = work; /* dummy value--not used */ + end = 19; + break; + case LENS: + base = lbase; + base -= 257; + extra = lext; + extra -= 257; + end = 256; + break; + default: /* DISTS */ + base = dbase; + extra = dext; + end = -1; + } + + /* initialize state for loop */ + huff = 0; /* starting code */ + sym = 0; /* starting code symbol */ + len = min; /* starting code length */ + next = *table; /* current table to fill in */ + curr = root; /* current table index bits */ + drop = 0; /* current bits to drop from code for index */ + low = (unsigned)(-1); /* trigger new sub-table when len > root */ + used = 1U << root; /* use root table entries */ + mask = used - 1; /* mask for comparing low */ + + /* check available table space */ + if (type == LENS && used >= ENOUGH - MAXD) + return 1; + + /* process all codes and make table entries */ + for (;;) { + /* create table entry */ + this.bits = (unsigned char)(len - drop); + if ((int)(work[sym]) < end) { + this.op = (unsigned char)0; + this.val = work[sym]; + } + else if ((int)(work[sym]) > end) { + this.op = (unsigned char)(extra[work[sym]]); + this.val = base[work[sym]]; + } + else { + this.op = (unsigned char)(32 + 64); /* end of block */ + this.val = 0; + } + + /* replicate for those indices with low len bits equal to huff */ + incr = 1U << (len - drop); + fill = 1U << curr; + min = fill; /* save offset to next table */ + do { + fill -= incr; + next[(huff >> drop) + fill] = this; + } while (fill != 0); + + /* backwards increment the len-bit code huff */ + incr = 1U << (len - 1); + while (huff & incr) + incr >>= 1; + if (incr != 0) { + huff &= incr - 1; + huff += incr; + } + else + huff = 0; + + /* go to next symbol, update count, len */ + sym++; + if (--(count[len]) == 0) { + if (len == max) break; + len = lens[work[sym]]; + } + + /* create new sub-table if needed */ + if (len > root && (huff & mask) != low) { + /* if first time, transition to sub-tables */ + if (drop == 0) + drop = root; + + /* increment past last table */ + next += min; /* here min is 1 << curr */ + + /* determine length of next table */ + curr = len - drop; + left = (int)(1 << curr); + while (curr + drop < max) { + left -= count[curr + drop]; + if (left <= 0) break; + curr++; + left <<= 1; + } + + /* check for enough space */ + used += 1U << curr; + if (type == LENS && used >= ENOUGH - MAXD) + return 1; + + /* point entry in root table to sub-table */ + low = huff & mask; + (*table)[low].op = (unsigned char)curr; + (*table)[low].bits = (unsigned char)root; + (*table)[low].val = (unsigned short)(next - *table); + } + } + + /* + Fill in rest of table for incomplete codes. This loop is similar to the + loop above in incrementing huff for table indices. It is assumed that + len is equal to curr + drop, so there is no loop needed to increment + through high index bits. When the current sub-table is filled, the loop + drops back to the root table to fill in any remaining entries there. + */ + this.op = (unsigned char)64; /* invalid code marker */ + this.bits = (unsigned char)(len - drop); + this.val = (unsigned short)0; + while (huff != 0) { + /* when done with sub-table, drop back to root table */ + if (drop != 0 && (huff & mask) != low) { + drop = 0; + len = root; + next = *table; + this.bits = (unsigned char)len; + } + + /* put invalid code marker in table */ + next[huff >> drop] = this; + + /* backwards increment the len-bit code huff */ + incr = 1U << (len - 1); + while (huff & incr) + incr >>= 1; + if (incr != 0) { + huff &= incr - 1; + huff += incr; + } + else + huff = 0; + } + + /* set return parameters */ + *table += used; + *bits = root; + return 0; +} diff --git a/lib/zlib/inftrees.h b/lib/zlib/inftrees.h new file mode 100644 index 0000000..b1104c8 --- /dev/null +++ b/lib/zlib/inftrees.h @@ -0,0 +1,55 @@ +/* inftrees.h -- header to use inftrees.c + * Copyright (C) 1995-2005 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* WARNING: this file should *not* be used by applications. It is + part of the implementation of the compression library and is + subject to change. Applications should only use zlib.h. + */ + +/* Structure for decoding tables. Each entry provides either the + information needed to do the operation requested by the code that + indexed that table entry, or it provides a pointer to another + table that indexes more bits of the code. op indicates whether + the entry is a pointer to another table, a literal, a length or + distance, an end-of-block, or an invalid code. For a table + pointer, the low four bits of op is the number of index bits of + that table. For a length or distance, the low four bits of op + is the number of extra bits to get after the code. bits is + the number of bits in this code or part of the code to drop off + of the bit buffer. val is the actual byte to output in the case + of a literal, the base length or distance, or the offset from + the current table to the next table. Each entry is four bytes. */ +typedef struct { + unsigned char op; /* operation, extra bits, table bits */ + unsigned char bits; /* bits in this part of the code */ + unsigned short val; /* offset in table or code value */ +} code; + +/* op values as set by inflate_table(): + 00000000 - literal + 0000tttt - table link, tttt != 0 is the number of table index bits + 0001eeee - length or distance, eeee is the number of extra bits + 01100000 - end of block + 01000000 - invalid code + */ + +/* Maximum size of dynamic tree. The maximum found in a long but non- + exhaustive search was 1444 code structures (852 for length/literals + and 592 for distances, the latter actually the result of an + exhaustive search). The true maximum is not known, but the value + below is more than safe. */ +#define ENOUGH 2048 +#define MAXD 592 + +/* Type of code to build for inftable() */ +typedef enum { + CODES, + LENS, + DISTS +} codetype; + +extern int inflate_table OF((codetype type, unsigned short FAR *lens, + unsigned codes, code FAR * FAR *table, + unsigned FAR *bits, unsigned short FAR *work)); diff --git a/lib/zlib/zlib.c b/lib/zlib/zlib.c new file mode 100644 index 0000000..230d0df --- /dev/null +++ b/lib/zlib/zlib.c @@ -0,0 +1,24 @@ +/* + * This file is derived from various .h and .c files from the zlib-1.2.3 + * distribution by Jean-loup Gailly and Mark Adler, with some additions + * by Paul Mackerras to aid in implementing Deflate compression and + * decompression for PPP packets. See zlib.h for conditions of + * distribution and use. + * + * Changes that have been made include: + * - changed functions not used outside this file to "local" + * - added minCompression parameter to deflateInit2 + * - added Z_PACKET_FLUSH (see zlib.h for details) + * - added inflateIncomp + */ + +#include "zutil.h" +#include "inftrees.h" +#include "inflate.h" +#include "inffast.h" +#include "inffixed.h" +#include "inffast.c" +#include "inftrees.c" +#include "inflate.c" +#include "zutil.c" +#include "adler32.c" diff --git a/lib/zlib/zlib.h b/lib/zlib/zlib.h new file mode 100644 index 0000000..556be32 --- /dev/null +++ b/lib/zlib/zlib.h @@ -0,0 +1,20 @@ +/* Glue between u-boot and upstream zlib */ +#ifndef __GLUE_ZLIB_H__ +#define __GLUE_ZLIB_H__ + +#include <common.h> +#include <compiler.h> +#include <asm/unaligned.h> +#include <watchdog.h> +#include "u-boot/zlib.h" + +/* avoid conflicts */ +#undef OFF +#undef ASMINF +#undef POSTINC +#undef NO_GZIP +#define GUNZIP +#undef STDC +#undef NO_ERRNO_H + +#endif diff --git a/lib/zlib/zutil.c b/lib/zlib/zutil.c new file mode 100644 index 0000000..65f9554 --- /dev/null +++ b/lib/zlib/zutil.c @@ -0,0 +1,73 @@ +/* zutil.c -- target dependent utility functions for the compression library + * Copyright (C) 1995-2005 Jean-loup Gailly. + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* @(#) $Id$ */ + +#include "zutil.h" + +#ifndef NO_DUMMY_DECL +struct internal_state {int dummy;}; /* for buggy compilers */ +#endif + +const char * const z_errmsg[10] = { +"need dictionary", /* Z_NEED_DICT 2 */ +"stream end", /* Z_STREAM_END 1 */ +"", /* Z_OK 0 */ +"file error", /* Z_ERRNO (-1) */ +"stream error", /* Z_STREAM_ERROR (-2) */ +"data error", /* Z_DATA_ERROR (-3) */ +"insufficient memory", /* Z_MEM_ERROR (-4) */ +"buffer error", /* Z_BUF_ERROR (-5) */ +"incompatible version",/* Z_VERSION_ERROR (-6) */ +""}; + +#ifdef DEBUG + +#ifndef verbose +#define verbose 0 +#endif +int z_verbose = verbose; + +void z_error (m) + char *m; +{ + fprintf(stderr, "%s\n", m); + hang (); +} +#endif + +/* exported to allow conversion of error code to string for compress() and + * uncompress() + */ +#ifndef MY_ZCALLOC /* Any system without a special alloc function */ + +#ifndef STDC +extern voidp malloc OF((uInt size)); +extern voidp calloc OF((uInt items, uInt size)); +extern void free OF((voidpf ptr)); +#endif + +voidpf zcalloc (opaque, items, size) + voidpf opaque; + unsigned items; + unsigned size; +{ + if (opaque) + items += size - size; /* make compiler happy */ + return sizeof(uInt) > 2 ? (voidpf)malloc(items * size) : + (voidpf)calloc(items, size); +} + +void zcfree (opaque, ptr, nb) + voidpf opaque; + voidpf ptr; + unsigned nb; +{ + free(ptr); + if (opaque) + return; /* make compiler happy */ +} + +#endif /* MY_ZCALLOC */ diff --git a/lib/zlib/zutil.h b/lib/zlib/zutil.h new file mode 100644 index 0000000..46522c8 --- /dev/null +++ b/lib/zlib/zutil.h @@ -0,0 +1,121 @@ +/* zutil.h -- internal interface and configuration of the compression library + * Copyright (C) 1995-2005 Jean-loup Gailly. + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* WARNING: this file should *not* be used by applications. It is + part of the implementation of the compression library and is + subject to change. Applications should only use zlib.h. + */ + +/* @(#) $Id$ */ + +#ifndef ZUTIL_H +#define ZUTIL_H + +#define ZLIB_INTERNAL +#include "zlib.h" + +#ifdef STDC +# ifndef _WIN32_WCE +# include <stddef.h> +# endif +# include <string.h> +# include <stdlib.h> +#endif +#ifdef NO_ERRNO_H +# ifdef _WIN32_WCE + /* The Microsoft C Run-Time Library for Windows CE doesn't have + * errno. We define it as a global variable to simplify porting. + * Its value is always 0 and should not be used. We rename it to + * avoid conflict with other libraries that use the same workaround. + */ +# define errno z_errno +# endif + extern int errno; +#else +# ifndef _WIN32_WCE +# include <errno.h> +# endif +#endif + +#ifndef local +# define local static +#endif +/* compile with -Dlocal if your debugger can't find static symbols */ + +typedef unsigned char uch; +typedef uch FAR uchf; +typedef unsigned short ush; +typedef ush FAR ushf; +typedef unsigned long ulg; + +extern const char * const z_errmsg[10]; /* indexed by 2-zlib_error */ +/* (size given to avoid silly warnings with Visual C++) */ + +#define ERR_MSG(err) z_errmsg[Z_NEED_DICT-(err)] + +#define ERR_RETURN(strm,err) \ + return (strm->msg = (char*)ERR_MSG(err), (err)) +/* To be used only when the state is known to be valid */ + + /* common constants */ + +#ifndef DEF_WBITS +# define DEF_WBITS MAX_WBITS +#endif +/* default windowBits for decompression. MAX_WBITS is for compression only */ + +#if MAX_MEM_LEVEL >= 8 +# define DEF_MEM_LEVEL 8 +#else +# define DEF_MEM_LEVEL MAX_MEM_LEVEL +#endif +/* default memLevel */ + +#define STORED_BLOCK 0 +#define STATIC_TREES 1 +#define DYN_TREES 2 +/* The three kinds of block type */ + +#define MIN_MATCH 3 +#define MAX_MATCH 258 +/* The minimum and maximum match lengths */ + + /* functions */ + +#include <linux/string.h> +#define zmemcpy memcpy +#define zmemcmp memcmp +#define zmemzero(dest, len) memset(dest, 0, len) + +/* Diagnostic functions */ +#ifdef DEBUG +# include <stdio.h> + extern int z_verbose; + extern void z_error OF((char *m)); +# define Assert(cond,msg) {if(!(cond)) z_error(msg);} +# define Trace(x) {if (z_verbose>=0) fprintf x ;} +# define Tracev(x) {if (z_verbose>0) fprintf x ;} +# define Tracevv(x) {if (z_verbose>1) fprintf x ;} +# define Tracec(c,x) {if (z_verbose>0 && (c)) fprintf x ;} +# define Tracecv(c,x) {if (z_verbose>1 && (c)) fprintf x ;} +#else +# define Assert(cond,msg) +# define Trace(x) +# define Tracev(x) +# define Tracevv(x) +# define Tracec(c,x) +# define Tracecv(c,x) +#endif + + +voidpf zcalloc OF((voidpf opaque, unsigned items, unsigned size)); +void zcfree OF((voidpf opaque, voidpf ptr, unsigned size)); + +#define ZALLOC(strm, items, size) \ + (*((strm)->zalloc))((strm)->opaque, (items), (size)) +#define ZFREE(strm, addr) (*((strm)->zfree))((strm)->opaque, (voidpf)(addr), 0) +#define TRY_FREE(s, p) {if (p) ZFREE(s, p);} + +#endif /* ZUTIL_H */ diff --git a/nand_spl/board/davinci/da8xxevm/u-boot.lds b/nand_spl/board/davinci/da8xxevm/u-boot.lds index c86117b..638ffd9 100644 --- a/nand_spl/board/davinci/da8xxevm/u-boot.lds +++ b/nand_spl/board/davinci/da8xxevm/u-boot.lds @@ -68,6 +68,8 @@ SECTIONS __got_end = .; + _end = .; + . = ALIGN(4); __bss_start = .; .bss : { *(.bss) } diff --git a/nand_spl/board/freescale/mpc8536ds/Makefile b/nand_spl/board/freescale/mpc8536ds/Makefile index a0e1455..43da3df 100644 --- a/nand_spl/board/freescale/mpc8536ds/Makefile +++ b/nand_spl/board/freescale/mpc8536ds/Makefile @@ -2,7 +2,7 @@ # (C) Copyright 2007 # Stefan Roese, DENX Software Engineering, sr@denx.de. # -# Copyright 2009 Freescale Semiconductor, Inc. +# Copyright 2009-2011 Freescale Semiconductor, Inc. # # See file CREDITS for list of people who contributed to this # project. @@ -32,8 +32,8 @@ include $(TOPDIR)/config.mk nandobj := $(OBJTREE)/nand_spl/ LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds -LDFLAGS := -T $(LDSCRIPT) -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) $(LDFLAGS) \ - $(LDFLAGS_FINAL) +LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) \ + $(LDFLAGS) $(LDFLAGS_FINAL) AFLAGS += -DCONFIG_NAND_SPL CFLAGS += -DCONFIG_NAND_SPL @@ -56,11 +56,14 @@ $(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@ -$(nandobj)u-boot-spl: $(OBJS) +$(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot-nand_spl.lds cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) $(PLATFORM_LIBS) \ -Map $(nandobj)u-boot-spl.map \ -o $(nandobj)u-boot-spl +$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) + $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@ + # create symbolic links for common files $(obj)cache.c: diff --git a/nand_spl/board/freescale/mpc8569mds/Makefile b/nand_spl/board/freescale/mpc8569mds/Makefile index a0e1455..43da3df 100644 --- a/nand_spl/board/freescale/mpc8569mds/Makefile +++ b/nand_spl/board/freescale/mpc8569mds/Makefile @@ -2,7 +2,7 @@ # (C) Copyright 2007 # Stefan Roese, DENX Software Engineering, sr@denx.de. # -# Copyright 2009 Freescale Semiconductor, Inc. +# Copyright 2009-2011 Freescale Semiconductor, Inc. # # See file CREDITS for list of people who contributed to this # project. @@ -32,8 +32,8 @@ include $(TOPDIR)/config.mk nandobj := $(OBJTREE)/nand_spl/ LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds -LDFLAGS := -T $(LDSCRIPT) -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) $(LDFLAGS) \ - $(LDFLAGS_FINAL) +LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) \ + $(LDFLAGS) $(LDFLAGS_FINAL) AFLAGS += -DCONFIG_NAND_SPL CFLAGS += -DCONFIG_NAND_SPL @@ -56,11 +56,14 @@ $(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@ -$(nandobj)u-boot-spl: $(OBJS) +$(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot-nand_spl.lds cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) $(PLATFORM_LIBS) \ -Map $(nandobj)u-boot-spl.map \ -o $(nandobj)u-boot-spl +$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) + $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@ + # create symbolic links for common files $(obj)cache.c: diff --git a/nand_spl/board/freescale/mpc8572ds/Makefile b/nand_spl/board/freescale/mpc8572ds/Makefile index 092ce14..43da3df 100644 --- a/nand_spl/board/freescale/mpc8572ds/Makefile +++ b/nand_spl/board/freescale/mpc8572ds/Makefile @@ -2,7 +2,7 @@ # (C) Copyright 2007 # Stefan Roese, DENX Software Engineering, sr@denx.de. # -# Copyright 2009-2010 Freescale Semiconductor, Inc. +# Copyright 2009-2011 Freescale Semiconductor, Inc. # # See file CREDITS for list of people who contributed to this # project. @@ -32,8 +32,8 @@ include $(TOPDIR)/config.mk nandobj := $(OBJTREE)/nand_spl/ LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds -LDFLAGS := -T $(LDSCRIPT) -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) $(LDFLAGS) \ - $(LDFLAGS_FINAL) +LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) \ + $(LDFLAGS) $(LDFLAGS_FINAL) AFLAGS += -DCONFIG_NAND_SPL CFLAGS += -DCONFIG_NAND_SPL @@ -56,11 +56,14 @@ $(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@ -$(nandobj)u-boot-spl: $(OBJS) +$(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot-nand_spl.lds cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) $(PLATFORM_LIBS) \ -Map $(nandobj)u-boot-spl.map \ -o $(nandobj)u-boot-spl +$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) + $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@ + # create symbolic links for common files $(obj)cache.c: diff --git a/nand_spl/board/freescale/mx31pdk/u-boot.lds b/nand_spl/board/freescale/mx31pdk/u-boot.lds index 324a932..d2b08f6 100644 --- a/nand_spl/board/freescale/mx31pdk/u-boot.lds +++ b/nand_spl/board/freescale/mx31pdk/u-boot.lds @@ -63,6 +63,8 @@ SECTIONS *(.dynsym) } + _end = .; + .bss __rel_dyn_start (OVERLAY) : { __bss_start = .; *(.bss) diff --git a/nand_spl/board/freescale/p1_p2_rdb/Makefile b/nand_spl/board/freescale/p1_p2_rdb/Makefile index a0e1455..43da3df 100644 --- a/nand_spl/board/freescale/p1_p2_rdb/Makefile +++ b/nand_spl/board/freescale/p1_p2_rdb/Makefile @@ -2,7 +2,7 @@ # (C) Copyright 2007 # Stefan Roese, DENX Software Engineering, sr@denx.de. # -# Copyright 2009 Freescale Semiconductor, Inc. +# Copyright 2009-2011 Freescale Semiconductor, Inc. # # See file CREDITS for list of people who contributed to this # project. @@ -32,8 +32,8 @@ include $(TOPDIR)/config.mk nandobj := $(OBJTREE)/nand_spl/ LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds -LDFLAGS := -T $(LDSCRIPT) -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) $(LDFLAGS) \ - $(LDFLAGS_FINAL) +LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) \ + $(LDFLAGS) $(LDFLAGS_FINAL) AFLAGS += -DCONFIG_NAND_SPL CFLAGS += -DCONFIG_NAND_SPL @@ -56,11 +56,14 @@ $(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@ -$(nandobj)u-boot-spl: $(OBJS) +$(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot-nand_spl.lds cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) $(PLATFORM_LIBS) \ -Map $(nandobj)u-boot-spl.map \ -o $(nandobj)u-boot-spl +$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) + $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@ + # create symbolic links for common files $(obj)cache.c: diff --git a/nand_spl/board/karo/tx25/u-boot.lds b/nand_spl/board/karo/tx25/u-boot.lds index 324a932..d2b08f6 100644 --- a/nand_spl/board/karo/tx25/u-boot.lds +++ b/nand_spl/board/karo/tx25/u-boot.lds @@ -63,6 +63,8 @@ SECTIONS *(.dynsym) } + _end = .; + .bss __rel_dyn_start (OVERLAY) : { __bss_start = .; *(.bss) diff --git a/nand_spl/nand_boot.c b/nand_spl/nand_boot.c index 76b8566..4a96878 100644 --- a/nand_spl/nand_boot.c +++ b/nand_spl/nand_boot.c @@ -90,6 +90,10 @@ static int nand_command(struct mtd_info *mtd, int block, int page, int offs, u8 cmd = NAND_CMD_READ0; } + /* Shift the offset from byte addressing to word addressing. */ + if (this->options & NAND_BUSWIDTH_16) + offs >>= 1; + /* Begin command latch cycle */ this->cmd_ctrl(mtd, cmd, NAND_CTRL_CLE | NAND_CTRL_CHANGE); /* Set ALE and clear CLE to start address cycle */ diff --git a/nand_spl/nand_boot_fsl_elbc.c b/nand_spl/nand_boot_fsl_elbc.c index 9547d44..502605b 100644 --- a/nand_spl/nand_boot_fsl_elbc.c +++ b/nand_spl/nand_boot_fsl_elbc.c @@ -51,11 +51,11 @@ static void nand_load(unsigned int offs, int uboot_size, uchar *dst) { fsl_lbc_t *regs = LBC_BASE_ADDR; uchar *buf = (uchar *)CONFIG_SYS_NAND_BASE; - int large = in_be32(®s->bank[0].or) & OR_FCM_PGS; - int block_shift = large ? 17 : 14; - int block_size = 1 << block_shift; - int page_size = large ? 2048 : 512; - int bad_marker = large ? page_size + 0 : page_size + 5; + const int large = CONFIG_SYS_NAND_OR_PRELIM & OR_FCM_PGS; + const int block_shift = large ? 17 : 14; + const int block_size = 1 << block_shift; + const int page_size = large ? 2048 : 512; + const int bad_marker = large ? page_size + 0 : page_size + 5; int fmr = (15 << FMR_CWTO_SHIFT) | (2 << FMR_AL_SHIFT) | 2; int pos = 0; diff --git a/nand_spl/nand_boot_fsl_nfc.c b/nand_spl/nand_boot_fsl_nfc.c index a3f0f6b..d6b0d9b 100644 --- a/nand_spl/nand_boot_fsl_nfc.c +++ b/nand_spl/nand_boot_fsl_nfc.c @@ -26,11 +26,7 @@ #include <common.h> #include <nand.h> -#ifdef CONFIG_MX31 -#include <asm/arch/mx31-regs.h> -#else #include <asm/arch/imx-regs.h> -#endif #include <asm/io.h> #include <fsl_nfc.h> diff --git a/net/bootp.c b/net/bootp.c index 1a71786..87b027e 100644 --- a/net/bootp.c +++ b/net/bootp.c @@ -464,7 +464,7 @@ static int DhcpExtended (u8 * e, int message_type, IPaddr_t ServerID, IPaddr_t R /* Pad to minimal length */ #ifdef CONFIG_DHCP_MIN_EXT_LEN - while ((e - start) <= CONFIG_DHCP_MIN_EXT_LEN) + while ((e - start) < CONFIG_DHCP_MIN_EXT_LEN) *e++ = 0; #endif @@ -25,6 +25,7 @@ #include <command.h> #include <net.h> #include <miiphy.h> +#include <phy.h> void eth_parse_enetaddr(const char *addr, uchar *enetaddr) { @@ -217,6 +218,11 @@ int eth_initialize(bd_t *bis) #if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) miiphy_init(); #endif + +#ifdef CONFIG_PHYLIB + phy_init(); +#endif + /* * If board-specific initialization exists, call it. * If not, call a CPU-specific one @@ -1724,7 +1724,8 @@ static int net_check_prereq (proto_t protocol) puts ("*** ERROR: `serverip' not set\n"); return (1); } -#if defined(CONFIG_CMD_PING) || defined(CONFIG_CMD_SNTP) +#if defined(CONFIG_CMD_PING) || defined(CONFIG_CMD_SNTP) || \ + defined(CONFIG_CMD_DNS) common: #endif diff --git a/tools/env/README b/tools/env/README index 91e679a..d5f228f 100644 --- a/tools/env/README +++ b/tools/env/README @@ -2,6 +2,12 @@ This is a demo implementation of a Linux command line tool to access the U-Boot's environment variables. +In the current version, there is an issue in cross-compilation. +In order to cross-compile fw_printenv, run + make HOSTCC=<your CC cross-compiler> env +in the root directory of the U-Boot distribution. For example, + make HOSTCC=arm-linux-gcc env + For the run-time utiltity configuration uncomment the line #define CONFIG_FILE "/etc/fw_env.config" in fw_env.h. diff --git a/tools/env/fw_env.c b/tools/env/fw_env.c index 8ff7052..ed6b53f 100644 --- a/tools/env/fw_env.c +++ b/tools/env/fw_env.c @@ -674,11 +674,7 @@ static int flash_read_buf (int dev, int fd, void *buf, size_t count, MEMGETBADBLOCK needs 64 bits */ int rc; - /* - * Start of the first block to be read, relies on the fact, that - * erase sector size is always a power of 2 - */ - blockstart = offset & ~(DEVESIZE (dev) - 1); + blockstart = (offset / DEVESIZE (dev)) * DEVESIZE (dev); /* Offset inside a block */ block_seek = offset - blockstart; @@ -694,8 +690,8 @@ static int flash_read_buf (int dev, int fd, void *buf, size_t count, * To calculate the top of the range, we have to use the * global DEVOFFSET (dev), which can be different from offset */ - top_of_range = (DEVOFFSET (dev) & ~(blocklen - 1)) + - ENVSECTORS (dev) * blocklen; + top_of_range = ((DEVOFFSET(dev) / blocklen) + + ENVSECTORS (dev)) * blocklen; /* Limit to one block for the first read */ if (readlen > blocklen - block_seek) @@ -749,9 +745,9 @@ static int flash_read_buf (int dev, int fd, void *buf, size_t count, } /* - * Write count bytes at offset, but stay within ENVSETCORS (dev) sectors of - * DEVOFFSET (dev). Similar to the read case above, on NOR we erase and write - * the whole data at once. + * Write count bytes at offset, but stay within ENVSECTORS (dev) sectors of + * DEVOFFSET (dev). Similar to the read case above, on NOR and dataflash we + * erase and write the whole data at once. */ static int flash_write_buf (int dev, int fd, void *buf, size_t count, off_t offset, uint8_t mtd_type) @@ -764,7 +760,7 @@ static int flash_write_buf (int dev, int fd, void *buf, size_t count, size_t erasesize; /* erase / write length - one block on NAND, whole area on NOR */ size_t processed = 0; /* progress counter */ - size_t write_total; /* total size to actually write - excludinig + size_t write_total; /* total size to actually write - excluding bad blocks */ off_t erase_offset; /* offset to the first erase block (aligned) below offset */ @@ -777,11 +773,10 @@ static int flash_write_buf (int dev, int fd, void *buf, size_t count, blocklen = DEVESIZE (dev); - /* Erase sector size is always a power of 2 */ - top_of_range = (DEVOFFSET (dev) & ~(blocklen - 1)) + - ENVSECTORS (dev) * blocklen; + top_of_range = ((DEVOFFSET(dev) / blocklen) + + ENVSECTORS (dev)) * blocklen; - erase_offset = offset & ~(blocklen - 1); + erase_offset = (offset / blocklen) * blocklen; /* Maximum area we may use */ erase_len = top_of_range - erase_offset; @@ -795,7 +790,8 @@ static int flash_write_buf (int dev, int fd, void *buf, size_t count, * to the start of the data, then count bytes of data, and to the * end of the block */ - write_total = (block_seek + count + blocklen - 1) & ~(blocklen - 1); + write_total = ((block_seek + count + blocklen - 1) / + blocklen) * blocklen; /* * Support data anywhere within erase sectors: read out the complete @@ -838,7 +834,7 @@ static int flash_write_buf (int dev, int fd, void *buf, size_t count, erase.length = erasesize; - /* This only runs once on NOR flash */ + /* This only runs once on NOR flash and SPI-dataflash */ while (processed < write_total) { rc = flash_bad_block (fd, mtd_type, &blockstart); if (rc < 0) /* block test failed */ @@ -857,12 +853,14 @@ static int flash_write_buf (int dev, int fd, void *buf, size_t count, erase.start = blockstart; ioctl (fd, MEMUNLOCK, &erase); - if (ioctl (fd, MEMERASE, &erase) != 0) { - fprintf (stderr, "MTD erase error on %s: %s\n", - DEVNAME (dev), - strerror (errno)); - return -1; - } + /* Dataflash does not need an explicit erase cycle */ + if (mtd_type != MTD_DATAFLASH) + if (ioctl (fd, MEMERASE, &erase) != 0) { + fprintf (stderr, "MTD erase error on %s: %s\n", + DEVNAME (dev), + strerror (errno)); + return -1; + } if (lseek (fd, blockstart, SEEK_SET) == -1) { fprintf (stderr, @@ -973,7 +971,9 @@ static int flash_read (int fd) return -1; } - if (mtdinfo.type != MTD_NORFLASH && mtdinfo.type != MTD_NANDFLASH) { + if (mtdinfo.type != MTD_NORFLASH && + mtdinfo.type != MTD_NANDFLASH && + mtdinfo.type != MTD_DATAFLASH) { fprintf (stderr, "Unsupported flash type %u\n", mtdinfo.type); return -1; } @@ -1067,11 +1067,11 @@ static char *envmatch (char * s1, char * s2) int fw_env_open(void) { int crc0, crc0_ok; - char flag0; + unsigned char flag0; void *addr0; int crc1, crc1_ok; - char flag1; + unsigned char flag1; void *addr1; struct env_image_single *single; @@ -1143,6 +1143,9 @@ int fw_env_open(void) } else if (DEVTYPE(dev_current) == MTD_NANDFLASH && DEVTYPE(!dev_current) == MTD_NANDFLASH) { environment.flag_scheme = FLAG_INCREMENTAL; + } else if (DEVTYPE(dev_current) == MTD_DATAFLASH && + DEVTYPE(!dev_current) == MTD_DATAFLASH) { + environment.flag_scheme = FLAG_BOOLEAN; } else { fprintf (stderr, "Incompatible flash types!\n"); return -1; @@ -1182,14 +1185,13 @@ int fw_env_open(void) } break; case FLAG_INCREMENTAL: - if ((flag0 == 255 && flag1 == 0) || - flag1 > flag0) + if (flag0 == 255 && flag1 == 0) dev_current = 1; else if ((flag1 == 255 && flag0 == 0) || - flag0 > flag1) - dev_current = 0; - else /* flags are equal - almost impossible */ + flag0 >= flag1) dev_current = 0; + else /* flag1 > flag0 */ + dev_current = 1; break; default: fprintf (stderr, "Unknown flag scheme %u \n", @@ -1234,14 +1236,29 @@ static int parse_config () strcpy (DEVNAME (0), DEVICE1_NAME); DEVOFFSET (0) = DEVICE1_OFFSET; ENVSIZE (0) = ENV1_SIZE; + /* Default values are: erase-size=env-size, #sectors=1 */ + DEVESIZE (0) = ENVSIZE (0); + ENVSECTORS (0) = 1; +#ifdef DEVICE1_ESIZE DEVESIZE (0) = DEVICE1_ESIZE; +#endif +#ifdef DEVICE1_ENVSECTORS ENVSECTORS (0) = DEVICE1_ENVSECTORS; +#endif + #ifdef HAVE_REDUND strcpy (DEVNAME (1), DEVICE2_NAME); DEVOFFSET (1) = DEVICE2_OFFSET; ENVSIZE (1) = ENV2_SIZE; + /* Default values are: erase-size=env-size, #sectors=1 */ + DEVESIZE (1) = ENVSIZE (1); + ENVSECTORS (1) = 1; +#ifdef DEVICE2_ESIZE DEVESIZE (1) = DEVICE2_ESIZE; +#endif +#ifdef DEVICE2_ENVSECTORS ENVSECTORS (1) = DEVICE2_ENVSECTORS; +#endif HaveRedundEnv = 1; #endif #endif @@ -1285,9 +1302,13 @@ static int get_config (char *fname) &DEVESIZE (i), &ENVSECTORS (i)); - if (rc < 4) + if (rc < 3) continue; + if (rc < 4) + /* Assume the erase size is the same as the env-size */ + DEVESIZE(i) = ENVSIZE(i); + if (rc < 5) /* Default - 1 sector */ ENVSECTORS (i) = 1; diff --git a/tools/env/fw_env.config b/tools/env/fw_env.config index c8f12cf..8e21d5a 100644 --- a/tools/env/fw_env.config +++ b/tools/env/fw_env.config @@ -1,11 +1,19 @@ # Configuration file for fw_(printenv/saveenv) utility. # Up to two entries are valid, in this case the redundant # environment sector is assumed present. -# Notice, that the "Number of sectors" is ignored on NOR. +# Notice, that the "Number of sectors" is ignored on NOR and SPI-dataflash. +# Futhermore, if the Flash sector size is ommitted, this value is assumed to +# be the same as the Environment size, which is valid for NOR and SPI-dataflash +# NOR example # MTD device name Device offset Env. size Flash sector size Number of sectors /dev/mtd1 0x0000 0x4000 0x4000 /dev/mtd2 0x0000 0x4000 0x4000 +# MTD SPI-dataflash example +# MTD device name Device offset Env. size Flash sector size Number of sectors +#/dev/mtd5 0x4200 0x4200 +#/dev/mtd6 0x4200 0x4200 + # NAND example #/dev/mtd0 0x4000 0x4000 0x20000 2 diff --git a/tools/env/fw_env.h b/tools/env/fw_env.h index 8130fa1..c83d608 100644 --- a/tools/env/fw_env.h +++ b/tools/env/fw_env.h @@ -34,10 +34,8 @@ #define DEVICE2_NAME "/dev/mtd2" #define DEVICE1_OFFSET 0x0000 #define ENV1_SIZE 0x4000 -#define DEVICE1_ESIZE 0x4000 #define DEVICE2_OFFSET 0x0000 #define ENV2_SIZE 0x4000 -#define DEVICE2_ESIZE 0x4000 #define CONFIG_BAUDRATE 115200 #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ diff --git a/tools/imximage.h b/tools/imximage.h index 38ca6be..d126a46 100644 --- a/tools/imximage.h +++ b/tools/imximage.h @@ -24,8 +24,6 @@ #ifndef _IMXIMAGE_H_ #define _IMXIMAGE_H_ -#include <config.h> - #define MAX_HW_CFG_SIZE_V2 121 /* Max number of registers imx can set for v2 */ #define MAX_HW_CFG_SIZE_V1 60 /* Max number of registers imx can set for v1 */ #define APP_CODE_BARKER 0xB1 diff --git a/tools/mkimage.c b/tools/mkimage.c index f5859d7..60f7263 100644 --- a/tools/mkimage.c +++ b/tools/mkimage.c @@ -23,6 +23,7 @@ #include "mkimage.h" #include <image.h> +#include <version.h> static void copy_file(int, const char *, int); static void usage(void); @@ -246,6 +247,9 @@ main (int argc, char **argv) case 'v': params.vflag++; break; + case 'V': + printf("mkimage version %s\n", PLAIN_VERSION); + exit(EXIT_SUCCESS); case 'x': params.xflag++; break; @@ -590,6 +594,8 @@ usage () params.cmdname); fprintf (stderr, " %s [-D dtc_options] -f fit-image.its fit-image\n", params.cmdname); + fprintf (stderr, " %s -V ==> print version information and exit\n", + params.cmdname); exit (EXIT_FAILURE); } |