diff options
| -rw-r--r-- | README | 6 | ||||
| -rw-r--r-- | drivers/dfu/Makefile | 1 | ||||
| -rw-r--r-- | drivers/dfu/dfu.c | 7 | ||||
| -rw-r--r-- | drivers/dfu/dfu_ram.c | 77 | ||||
| -rw-r--r-- | include/dfu.h | 18 |
5 files changed, 107 insertions, 2 deletions
@@ -1409,6 +1409,12 @@ The following options need to be configured: CONFIG_DFU_NAND This enables support for exposing NAND devices via DFU. + CONFIG_DFU_RAM + This enables support for exposing RAM via DFU. + Note: DFU spec refer to non-volatile memory usage, but + allow usages beyond the scope of spec - here RAM usage, + one that would help mostly the developer. + CONFIG_SYS_DFU_DATA_BUF_SIZE Dfu transfer uses a buffer before writing data to the raw storage device. Make the size (in bytes) of this buffer diff --git a/drivers/dfu/Makefile b/drivers/dfu/Makefile index fca370a..de9e44e 100644 --- a/drivers/dfu/Makefile +++ b/drivers/dfu/Makefile @@ -12,6 +12,7 @@ LIB = $(obj)libdfu.o COBJS-$(CONFIG_DFU_FUNCTION) += dfu.o COBJS-$(CONFIG_DFU_MMC) += dfu_mmc.o COBJS-$(CONFIG_DFU_NAND) += dfu_nand.o +COBJS-$(CONFIG_DFU_RAM) += dfu_ram.o SRCS := $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(COBJS-y)) diff --git a/drivers/dfu/dfu.c b/drivers/dfu/dfu.c index 689f5db..56b21c7 100644 --- a/drivers/dfu/dfu.c +++ b/drivers/dfu/dfu.c @@ -348,6 +348,9 @@ static int dfu_fill_entity(struct dfu_entity *dfu, char *s, int alt, } else if (strcmp(interface, "nand") == 0) { if (dfu_fill_entity_nand(dfu, s)) return -1; + } else if (strcmp(interface, "ram") == 0) { + if (dfu_fill_entity_ram(dfu, s)) + return -1; } else { printf("%s: Device %s not (yet) supported!\n", __func__, interface); @@ -397,14 +400,14 @@ int dfu_config_entities(char *env, char *interface, int num) const char *dfu_get_dev_type(enum dfu_device_type t) { - const char *dev_t[] = {NULL, "eMMC", "OneNAND", "NAND" }; + const char *dev_t[] = {NULL, "eMMC", "OneNAND", "NAND", "RAM" }; return dev_t[t]; } const char *dfu_get_layout(enum dfu_layout l) { const char *dfu_layout[] = {NULL, "RAW_ADDR", "FAT", "EXT2", - "EXT3", "EXT4" }; + "EXT3", "EXT4", "RAM_ADDR" }; return dfu_layout[l]; } diff --git a/drivers/dfu/dfu_ram.c b/drivers/dfu/dfu_ram.c new file mode 100644 index 0000000..335a8e1 --- /dev/null +++ b/drivers/dfu/dfu_ram.c @@ -0,0 +1,77 @@ +/* + * (C) Copyright 2013 + * Afzal Mohammed <afzal.mohd.ma@gmail.com> + * + * Reference: dfu_mmc.c + * Copyright (C) 2012 Samsung Electronics + * author: Lukasz Majewski <l.majewski@samsung.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <malloc.h> +#include <errno.h> +#include <dfu.h> + +static int dfu_transfer_medium_ram(enum dfu_op op, struct dfu_entity *dfu, + u64 offset, void *buf, long *len) +{ + if (dfu->layout != DFU_RAM_ADDR) { + error("unsupported layout: %s\n", dfu_get_layout(dfu->layout)); + return -EINVAL; + } + + if (offset > dfu->data.ram.size) { + error("request exceeds allowed area\n"); + return -EINVAL; + } + + if (op == DFU_OP_WRITE) + memcpy(dfu->data.ram.start + offset, buf, *len); + else + memcpy(buf, dfu->data.ram.start + offset, *len); + + return 0; +} + +static int dfu_write_medium_ram(struct dfu_entity *dfu, u64 offset, + void *buf, long *len) +{ + return dfu_transfer_medium_ram(DFU_OP_WRITE, dfu, offset, buf, len); +} + +static int dfu_read_medium_ram(struct dfu_entity *dfu, u64 offset, + void *buf, long *len) +{ + if (!*len) { + *len = dfu->data.ram.size; + return 0; + } + + return dfu_transfer_medium_ram(DFU_OP_READ, dfu, offset, buf, len); +} + +int dfu_fill_entity_ram(struct dfu_entity *dfu, char *s) +{ + char *st; + + dfu->dev_type = DFU_DEV_RAM; + st = strsep(&s, " "); + if (strcmp(st, "ram")) { + error("unsupported device: %s\n", st); + return -ENODEV; + } + + dfu->layout = DFU_RAM_ADDR; + dfu->data.ram.start = (void *)simple_strtoul(s, &s, 16); + s++; + dfu->data.ram.size = simple_strtoul(s, &s, 16); + + dfu->write_medium = dfu_write_medium_ram; + dfu->read_medium = dfu_read_medium_ram; + + dfu->inited = 0; + + return 0; +} diff --git a/include/dfu.h b/include/dfu.h index 6a3e253..6f4bba4 100644 --- a/include/dfu.h +++ b/include/dfu.h @@ -19,6 +19,7 @@ enum dfu_device_type { DFU_DEV_MMC = 1, DFU_DEV_ONENAND, DFU_DEV_NAND, + DFU_DEV_RAM, }; enum dfu_layout { @@ -27,6 +28,7 @@ enum dfu_layout { DFU_FS_EXT2, DFU_FS_EXT3, DFU_FS_EXT4, + DFU_RAM_ADDR, }; enum dfu_op { @@ -56,6 +58,11 @@ struct nand_internal_data { unsigned int ubi; }; +struct ram_internal_data { + void *start; + unsigned int size; +}; + static inline unsigned int get_mmc_blk_size(int dev) { return find_mmc_device(dev)->read_bl_len; @@ -81,6 +88,7 @@ struct dfu_entity { union { struct mmc_internal_data mmc; struct nand_internal_data nand; + struct ram_internal_data ram; } data; int (*read_medium)(struct dfu_entity *dfu, @@ -143,4 +151,14 @@ static inline int dfu_fill_entity_nand(struct dfu_entity *dfu, char *s) } #endif +#ifdef CONFIG_DFU_RAM +extern int dfu_fill_entity_ram(struct dfu_entity *dfu, char *s); +#else +static inline int dfu_fill_entity_ram(struct dfu_entity *dfu, char *s) +{ + puts("RAM support not available!\n"); + return -1; +} +#endif + #endif /* __DFU_ENTITY_H_ */ |