diff options
Diffstat (limited to 'CHANGELOG')
| -rw-r--r-- | CHANGELOG | 372 |
1 files changed, 372 insertions, 0 deletions
@@ -1,3 +1,297 @@ +commit 17a41e4492121ccf9fa2c10c2cb1a6d1c18d74f7 +Author: Kim Phillips <kim.phillips@freescale.com> +Date: Wed Jan 9 16:56:54 2008 -0600 + + Add QE brg freq and correct qe bus freq fdt update code + + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + Signed-off-by: Andy Fleming <afleming@freescale.com> + +commit 890dfef06c2d169a3356359596890754dfb8ee1c +Author: Andy Fleming <afleming@freescale.com> +Date: Wed Jan 9 16:34:51 2008 -0600 + + Remove cache config from ATUM8548 and sbc8548 configs + + These boards weren't updated by Kumar's config patch because they + weren't in the tree, yet. + + Signed-off-by: Andy Fleming <afleming@freescale.com> + +commit b8ec2385038c094b07ec5b49336289a46b6e9cc6 +Author: Timur Tabi <timur@freescale.com> +Date: Mon Jan 7 13:31:19 2008 -0600 + + 85xx: add ability to upload QE firmware + + Define the layout of a binary blob that contains a QE firmware and instructions + on how to upload it. Add function qe_upload_firmware() to parse the blob and + perform the actual upload. Add command-line command "qe fw" to take a firmware + blob in memory and upload it. Update ft_cpu_setup() on 85xx to create the + 'firmware' device tree node if U-Boot has uploaded a firmware. Fully define + 'struct rsp' in immap_qe.h to include the actual RISC Special Registers. + + Signed-off-by: Timur Tabi <timur@freescale.com> + +commit b009f3eca99bb7b9e6ba6639a8909a138dd5e9fe +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Tue Jan 8 01:22:21 2008 -0600 + + 85xx: Remove cache config from configs.h + + Either use the standard defines in asm/cache.h or grab the information + at runtime from the L1CFG SPR. + + Also, minor cleanup in cache.h to make the code a bit more readable. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit b964e9368f45372aaf1da0c13fe56f6d81ae8e96 +Author: robert lazarski <robertlazarski@gmail.com> +Date: Fri Dec 21 10:39:27 2007 -0500 + + mpc85xx: Add support for ATUM8548 (updated) + + Add support for Instituto Atlantico's ATUM8548 board + + Signed-off-by: robert lazarski <robertlazarski@gmail.com> + Signed-off-by: Andy Fleming <afleming@freescale.com> + +commit 7bd6104b71de9bca80ac8e0936003443bb42f2fc +Author: robert lazarski <robertlazarski@gmail.com> +Date: Fri Dec 21 10:36:37 2007 -0500 + + mpc85xx: Add support for ATUM8548 (updated) + + Add support for Instituto Atlantico's ATUM8548 board + + Signed-off-by: robert lazarski <robertlazarski@gmail.com> + +commit 9e3ed392d2c8965e24c942b58796c31c644c2f70 +Author: Joe Hamman <joe.hamman@embeddedspecialties.com> +Date: Thu Dec 13 06:45:14 2007 -0600 + + mpc85xx: Add support for SBC8548 (updated) + + Add support for Wind River's SBC8548 reference board. + + Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com> + +commit 11c45ebd46d6517b51b7a92dd52a618b2f4e5586 +Author: Joe Hamman <joe.hamman@embeddedspecialties.com> +Date: Thu Dec 13 06:45:08 2007 -0600 + + mpc85xx: Add support for SBC8548 (updated) + + Add support for Wind River's SBC8548 reference board. + + Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com> + Signed-off by: Andy Fleming <afleming@freescale.com> + +commit 64d4bcb087c2ece1c4d0de8efe85e0075e5b1594 +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Mon Oct 22 19:58:19 2007 +0400 + + MPC8568E-MDS: set up QE pario for UART1 + + To use UART1 on the MPC8568E-MDS, QE pario pins PC[0:3] should + be set up appropriately. + + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + +commit ad162249cb371e9e38971676f09be791e5f3cf4a +Author: Anton Vorontsov <avorontsov@ru.mvista.com> +Date: Mon Oct 22 18:12:46 2007 +0400 + + MPC8568E-MDS: reset UCCs to use them reliably + + In order to use GETH1 and GETH2 on the MPC8568E-MDS, we should reset + UCCs. + + p.s Similar code exists in the Linux kernel board file (for capability + reasons with older U-Boots), but should be removed some day. + + Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> + +commit 2146cf56821c3364786ca94a7306008c5824b238 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Wed Dec 19 01:18:15 2007 -0600 + + Reworked FSL Book-E TLB macros to be more readable + + The old macros made it difficult to know what WIMGE and perm bits + were set for a TLB entry. Actually use the bit masks for these items + since they are only a single bit. + + Also moved the macros into mmu.h out of e500.h since they aren't specific + to e500. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 1d47273d46925929f8f2c1913cd96d7257aade88 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Tue Dec 18 23:21:51 2007 -0600 + + Use FSL Book-E MMU macros from Linux Kernel + + Grab the FSL Book-E MAS register macros from Linux. Also added + defines for page sizes up to 4TB and removed SHAREN since it doesnt + really exist. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 02df4a270f817ef6ec39047a01b55fecdc5f3b37 +Author: Andy Fleming <afleming@freescale.com> +Date: Wed Jan 9 13:51:32 2008 -0600 + + Fix my own merge stupidity + + Way back in August I merged Heiko's patch: + 566a494f592: [PCS440EP] upgrade the PCS440EP board + + with Jon's CONFIG_COMMANDS patches. + + This was done in commit: 6bf6f114dcdd97ec3f80c2761ed40e31229d6b78 + + However, in the process, I left out some of Heiko's good changes. + + Now Heiko's and Jon's patches are properly merged in fat_register_device() + + Signed-off-by: Andy Fleming <afleming@freescale.com> + +commit 6636b62a6efc7f14e6e788788631ae7a7fca4537 +Author: James Yang <James.Yang@freescale.com> +Date: Wed Jan 9 11:17:49 2008 -0600 + + Expose parse_line() globally. + + Add new function readline_into_buffer() that allows the + output of readline to be put into a pointer to char buffer. + + This refactoring allows other functions besides the + main command loop to also use the same input mechanism. + + Signed-off-by: James Yang <James.Yang@freescale.com> + Acked-by: Jon Loeliger <jdl@freescale.com> + +commit 7ca90513486abd4ae50bd1b7403f47cc58c5ad25 +Author: Guennadi Liakhovetski <lg@denx.de> +Date: Wed Jan 9 01:15:25 2008 +0100 + + trivial: fix consequences of a bad merge + + Fix what looks like a merge artifact. + + Signed-off-by: Guennadi Liakhovetski <lg@denx.de> + +commit 4785a694c0045996ccf0ac5b8edf531efc1b730e +Author: Zhang Wei <wei.zhang@freescale.com> +Date: Thu Jan 3 10:51:15 2008 +0800 + + Add Ctrl combo key support to usb keyboard driver. + + Ctrl combo key support is added, which is very useful to input Ctrl-C + for interrupt current job. + Also add usb_event_poll() calling to usb_kbd_testc(), which can get + key input when tstc() is called. + + Signed-off-by: Zhang Wei <wei.zhang@freescale.com> + +commit 10c7382bc5d5e64c47f94ac2ca78cc574442e82d +Author: Marcel Ziswiler <marcel@ziswiler.com> +Date: Sun Dec 30 03:30:56 2007 +0100 + + fix various comments + + Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> + +commit 7817cb2083d982923752fe0f12b67c0e7c09a027 +Author: Marcel Ziswiler <marcel@ziswiler.com> +Date: Sun Dec 30 03:30:46 2007 +0100 + + fix comments with new drivers organization + + Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> + +commit a9b410dc7d2a4721c408b13abfc037988150f145 +Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com> +Date: Fri Dec 28 12:50:59 2007 +0900 + + Remove the obsolete terse version of do_mii() + + We now have more useful version of do_mii() and everybody use it. + Gerald Van Baren says: + + > When I originally wrote the mii command 6(!) years ago, I wrote a + > verbose version that printed human readable decomposition of the flags, + > etc., and a terse one that didn't print as much stuff and thus had a + > smaller memory footprint. + > + > It sounds like the terse version has withered and died, apparently + > people are only using the verbose version (which is very understandable, + > I do myself). + + Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> + Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> + +commit 01c687aa6e065bd4faf80f723361e798941dd6b0 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Thu Dec 27 13:42:56 2007 -0500 + + Do not reference sha1.c when building mkimage. + + remove sha1.o from mkimage linking since it isn't actually used. + + Signed-Off-By: Mike Frysinger <vapier@gentoo.org> + +commit b9173af73e524d37c812f210173cf83385c5171a +Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com> +Date: Thu Dec 27 15:39:54 2007 +0900 + + common/cmd_mii.c: Add sanity argc check + + If type mii command without arguments, we suffer from uninitialized argv[] + entries; for example we MIPS get stuck by TLB error. + + Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> + +commit 500856eb1707ed17d9204baa61dd59948d3b2899 +Author: Rafal Jaworowski <raj@semihalf.com> +Date: Wed Jan 9 19:39:36 2008 +0100 + + API for external applications. + + This is an API for external (standalone) applications running on top of + U-Boot, and is meant to be more extensible and robust than the existing + jumptable mechanism. It is similar to UNIX syscall approach. See api/README + for more details. + + Included is the demo application using this new framework (api_examples). + + Please note this is still an experimental feature, and is turned off by + default. + + Signed-off-by: Rafal Jaworowski <raj@semihalf.com> + +commit 26a41790f8eba19ad450e18ae91351daf485b3e2 +Author: Rafal Jaworowski <raj@semihalf.com> +Date: Wed Jan 9 18:05:27 2008 +0100 + + Globalize envmatch() + + The newly introduced API (routines related to env vars) will need to call + it. + + Signed-off-by: Rafal Zabdyr <armo@semihalf.com> + +commit 6007f3251c0967adc13f2ed8be1b924ddc30124d +Author: Wolfgang Denk <wd@denx.de> +Date: Wed Jan 9 15:14:46 2008 +0100 + + Coding Style cleanup, update CHANGELOG + + Signed-off-by: Wolfgang Denk <wd@denx.de> + commit fc6414eca55f1fc108fb12fc8cdc43bd8b4463f9 Author: Mike Frysinger <vapier@gentoo.org> Date: Tue Dec 18 04:29:55 2007 -0500 @@ -98,6 +392,20 @@ Date: Tue Nov 20 13:14:20 2007 +0100 Signed-off-by: Guennadi Liakhovetski <lg@denx.de> +commit 58694f9709c0c3e3178e349ae748d98cfb0c639a +Author: Zhang Wei <wei.zhang@freescale.com> +Date: Thu Jan 3 10:51:15 2008 +0800 + + Add Ctrl combo key support to usb keyboard driver. + + Ctrl combo key support is added, which is very useful to input Ctrl-C + for interrupt current job. + Also add usb_event_poll() calling to usb_kbd_testc(), which can get + key input when tstc() is called. + + Signed-off-by: Zhang Wei <wei.zhang@freescale.com> + Signed-off-by: Markus Klotzbuecher <mk@denx.de> + commit 07eb02687f008721974a2fb54cd7fdc28033ab3c Author: Wolfgang Denk <wd@denx.de> Date: Wed Jan 9 13:43:38 2008 +0100 @@ -411,6 +719,28 @@ Date: Tue Jan 8 11:13:09 2008 +0100 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> +commit c83d7ca4dadd44ae430235077f63b64a11f36f6e +Author: Wolfgang Denk <wd@denx.de> +Date: Tue Jan 8 22:58:27 2008 +0100 + + Fix compile problem with new env code. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 6de66b35426312a21174a9bf0576a094e2904bea +Author: Markus Klotzbücher <mk@denx.de> +Date: Tue Nov 27 10:23:20 2007 +0100 + + tools: fix fw_printenv tool to compile again + + This patch updates the fw_printenv/fw_setenv userspace tool to include + the correct MTD header in order to compile against current kernel + headers. Backward compatibility is preserved by introducing an option + MTD_VERSION which can be set to "old" for compilation using the old MTD + headers. Along with this a number of warnings are fixed. + + Signed-off-by: Markus Klotzbuecher <mk@denx.de> + commit ad3006fe7e84667021753b74247b0bafd97ba35f Author: Gerald Van Baren <vanbaren@cideas.com> Date: Mon Jan 7 23:47:32 2008 -0500 @@ -4521,6 +4851,48 @@ Date: Wed Oct 3 07:34:10 2007 +0200 Signed-off-by: Stefan Roese <sr@denx.de> +commit 245a362ad3c0c1b84fccc9fec7b623eb14f6e502 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Wed Oct 24 01:37:36 2007 +0200 + + TQM5200: Call usb_cpu_init() during board init + + usb_cpu_init() configures GPS USB pins, clocks, etc. and + is required for proper operation of kernel USB subsystem. + This setup was previously done in the kernel by the fixup + code which is being removed, thus low level init must be + done by U-boot now. + + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + Signed-off-by: Markus Klotzbuecher <mk@denx.de> + +commit b5af773f8d92677e06f3295b45557c9d0a487c24 +Author: Zhang Wei <wei.zhang@freescale.com> +Date: Thu Oct 25 17:51:27 2007 +0800 + + Fix the issue of usb_kbd driver missing the scan code of key 'z'. + + The scan code of the key 'z' is 0x1d, which should be handled. + + The change has be tested on NOVATEK USB keyboard and ULI PCI OHCI + controller. + + Signed-off-by: Zhang Wei <wei.zhang@freescale.com> + Signed-off-by: Markus Klotzbuecher <mk@denx.de> + +commit 85ac988e86f9414fa645b0148dc66c3520a1eb84 +Author: Rodolfo Giometti <giometti@enneenne.com> +Date: Mon Oct 15 11:59:17 2007 +0200 + + PXA USB OHCI: "usb stop" implementation. + + Some USB keys need to be switched off before loading the kernel + otherwise they can remain in an undefined status which prevents them + to be correctly recognized by the kernel. + + Signed-off-by: Rodolfo Giometti <giometti@linux.it> + Signed-off-by: Markus Klotzbuecher <mk@denx.de> + commit 31548249decf18a6b877a18436b6139dd483fe4a Author: Justin Flammia <jflammia@savantav.com> Date: Mon Oct 29 17:40:35 2007 -0400 |