summaryrefslogtreecommitdiff
path: root/arch/arm/cpu/armv7/virt-v7.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/cpu/armv7/virt-v7.c')
-rw-r--r--arch/arm/cpu/armv7/virt-v7.c76
1 files changed, 19 insertions, 57 deletions
diff --git a/arch/arm/cpu/armv7/virt-v7.c b/arch/arm/cpu/armv7/virt-v7.c
index 2cd604f..651ca40 100644
--- a/arch/arm/cpu/armv7/virt-v7.c
+++ b/arch/arm/cpu/armv7/virt-v7.c
@@ -13,17 +13,10 @@
#include <asm/armv7.h>
#include <asm/gic.h>
#include <asm/io.h>
+#include <asm/secure.h>
unsigned long gic_dist_addr;
-static unsigned int read_cpsr(void)
-{
- unsigned int reg;
-
- asm volatile ("mrs %0, cpsr\n" : "=r" (reg));
- return reg;
-}
-
static unsigned int read_id_pfr1(void)
{
unsigned int reg;
@@ -37,25 +30,8 @@ static unsigned long get_gicd_base_address(void)
#ifdef CONFIG_ARM_GIC_BASE_ADDRESS
return CONFIG_ARM_GIC_BASE_ADDRESS + GIC_DIST_OFFSET;
#else
- unsigned midr;
unsigned periphbase;
- /* check whether we are an Cortex-A15 or A7.
- * The actual HYP switch should work with all CPUs supporting
- * the virtualization extension, but we need the GIC address,
- * which we know only for sure for those two CPUs.
- */
- asm("mrc p15, 0, %0, c0, c0, 0\n" : "=r"(midr));
- switch (midr & MIDR_PRIMARY_PART_MASK) {
- case MIDR_CORTEX_A9_R0P1:
- case MIDR_CORTEX_A15_R0P0:
- case MIDR_CORTEX_A7_R0P0:
- break;
- default:
- printf("nonsec: could not determine GIC address.\n");
- return -1;
- }
-
/* get the GIC base address from the CBAR register */
asm("mrc p15, 4, %0, c15, c0, 0\n" : "=r" (periphbase));
@@ -72,6 +48,18 @@ static unsigned long get_gicd_base_address(void)
#endif
}
+static void relocate_secure_section(void)
+{
+#ifdef CONFIG_ARMV7_SECURE_BASE
+ size_t sz = __secure_end - __secure_start;
+
+ memcpy((void *)CONFIG_ARMV7_SECURE_BASE, __secure_start, sz);
+ flush_dcache_range(CONFIG_ARMV7_SECURE_BASE,
+ CONFIG_ARMV7_SECURE_BASE + sz + 1);
+ invalidate_icache_all();
+#endif
+}
+
static void kick_secondary_cpus_gic(unsigned long gicdaddr)
{
/* kick all CPUs (except this one) by writing to GICD_SGIR */
@@ -83,35 +71,7 @@ void __weak smp_kick_all_cpus(void)
kick_secondary_cpus_gic(gic_dist_addr);
}
-int armv7_switch_hyp(void)
-{
- unsigned int reg;
-
- /* check whether we are in HYP mode already */
- if ((read_cpsr() & 0x1f) == 0x1a) {
- debug("CPU already in HYP mode\n");
- return 0;
- }
-
- /* check whether the CPU supports the virtualization extensions */
- reg = read_id_pfr1();
- if ((reg & CPUID_ARM_VIRT_MASK) != 1 << CPUID_ARM_VIRT_SHIFT) {
- printf("HYP mode: Virtualization extensions not implemented.\n");
- return -1;
- }
-
- /* call the HYP switching code on this CPU also */
- _switch_to_hyp();
-
- if ((read_cpsr() & 0x1F) != 0x1a) {
- printf("HYP mode: switch not successful.\n");
- return -1;
- }
-
- return 0;
-}
-
-int armv7_switch_nonsec(void)
+int armv7_init_nonsec(void)
{
unsigned int reg;
unsigned itlinesnr, i;
@@ -147,11 +107,13 @@ int armv7_switch_nonsec(void)
for (i = 1; i <= itlinesnr; i++)
writel((unsigned)-1, gic_dist_addr + GICD_IGROUPRn + 4 * i);
- smp_set_core_boot_addr((unsigned long)_smp_pen, -1);
+#ifndef CONFIG_ARMV7_PSCI
+ smp_set_core_boot_addr((unsigned long)secure_ram_addr(_smp_pen), -1);
smp_kick_all_cpus();
+#endif
/* call the non-sec switching code on this CPU also */
- _nonsec_init();
-
+ relocate_secure_section();
+ secure_ram_addr(_nonsec_init)();
return 0;
}