summaryrefslogtreecommitdiff
path: root/arch/arm/dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/dts')
-rw-r--r--arch/arm/dts/rk3036-sdk-u-boot.dtsi11
-rw-r--r--arch/arm/dts/rk3229-evb.dts4
-rw-r--r--arch/arm/dts/rk322x.dtsi10
-rw-r--r--arch/arm/dts/rk3288-phycore-som.dtsi8
-rw-r--r--arch/arm/dts/rk3399-firefly.dts5
-rw-r--r--arch/arm/dts/rk3399-puma.dtsi4
-rw-r--r--arch/arm/dts/sun7i-a20-pcduino3.dts2
-rw-r--r--arch/arm/dts/tegra124-nyan-big.dts5
8 files changed, 44 insertions, 5 deletions
diff --git a/arch/arm/dts/rk3036-sdk-u-boot.dtsi b/arch/arm/dts/rk3036-sdk-u-boot.dtsi
new file mode 100644
index 0000000..6f15f4a
--- /dev/null
+++ b/arch/arm/dts/rk3036-sdk-u-boot.dtsi
@@ -0,0 +1,11 @@
+&uart2 {
+ u-boot,dm-pre-reloc;
+};
+
+&grf {
+ u-boot,dm-pre-reloc;
+};
+
+&pinctrl {
+ u-boot,dm-pre-reloc;
+};
diff --git a/arch/arm/dts/rk3229-evb.dts b/arch/arm/dts/rk3229-evb.dts
index ccdac1c..37137c2 100644
--- a/arch/arm/dts/rk3229-evb.dts
+++ b/arch/arm/dts/rk3229-evb.dts
@@ -75,3 +75,7 @@
&uart2 {
status = "okay";
};
+
+&usb20_otg {
+ status = "okay";
+};
diff --git a/arch/arm/dts/rk322x.dtsi b/arch/arm/dts/rk322x.dtsi
index 7237da4..4f2a1f6 100644
--- a/arch/arm/dts/rk322x.dtsi
+++ b/arch/arm/dts/rk322x.dtsi
@@ -403,6 +403,16 @@
status = "disabled";
};
+ usb20_otg: usb@30040000 {
+ compatible = "rockchip,rk3229-usb", "rockchip,rk3288-usb",
+ "snps,dwc2";
+ reg = <0x30040000 0x40000>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ hnp-srp-disable;
+ dr_mode = "otg";
+ status = "disabled";
+ };
+
gmac: ethernet@30200000 {
compatible = "rockchip,rk3228-gmac";
reg = <0x30200000 0x10000>;
diff --git a/arch/arm/dts/rk3288-phycore-som.dtsi b/arch/arm/dts/rk3288-phycore-som.dtsi
index fd463f4..02d1196 100644
--- a/arch/arm/dts/rk3288-phycore-som.dtsi
+++ b/arch/arm/dts/rk3288-phycore-som.dtsi
@@ -61,6 +61,7 @@
aliases {
rtc0 = &i2c_rtc;
rtc1 = &rk818;
+ eeprom0 = &i2c_eeprom_id;
};
ext_gmac: external-gmac-clock {
@@ -383,6 +384,13 @@
pagesize = <32>;
};
+ /* M24C32-D Identification page */
+ i2c_eeprom_id: eeprom@58 {
+ compatible = "atmel,24c32";
+ reg = <0x58>;
+ pagesize = <32>;
+ };
+
vdd_cpu: regulator@60 {
compatible = "fcs,fan53555";
reg = <0x60>;
diff --git a/arch/arm/dts/rk3399-firefly.dts b/arch/arm/dts/rk3399-firefly.dts
index 91d3193..3d3f507 100644
--- a/arch/arm/dts/rk3399-firefly.dts
+++ b/arch/arm/dts/rk3399-firefly.dts
@@ -8,7 +8,7 @@
#include <dt-bindings/pwm/pwm.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include "rk3399.dtsi"
-#include "rk3399-sdram-ddr3-1333.dtsi"
+#include "rk3399-sdram-ddr3-1600.dtsi"
/ {
model = "Firefly-RK3399 Board";
@@ -157,8 +157,9 @@
regulator-name = "vdd_log";
regulator-always-on;
regulator-boot-on;
- regulator-min-microvolt = <800000>;
+ regulator-min-microvolt = <430000>;
regulator-max-microvolt = <1400000>;
+ regulator-init-microvolt = <950000>;
};
vccadc_ref: vccadc-ref {
diff --git a/arch/arm/dts/rk3399-puma.dtsi b/arch/arm/dts/rk3399-puma.dtsi
index 1aad6c5..dd1baea 100644
--- a/arch/arm/dts/rk3399-puma.dtsi
+++ b/arch/arm/dts/rk3399-puma.dtsi
@@ -12,7 +12,9 @@
compatible = "tsd,rk3399-q7", "tsd,puma", "rockchip,rk3399";
config {
- u-boot,spl-payload-offset = <0x40000>; /* 256kbyte */
+ u-boot,spl-payload-offset = <0x40000>; /* @ 256KB */
+ u-boot,mmc-env-offset = <0x4000>; /* @ 16KB */
+ u-boot,efi-partition-entries-offset = <0x200000>; /* 2MB */
u-boot,boot-led = "module_led";
};
diff --git a/arch/arm/dts/sun7i-a20-pcduino3.dts b/arch/arm/dts/sun7i-a20-pcduino3.dts
index 1a8b39b..37b1e0e 100644
--- a/arch/arm/dts/sun7i-a20-pcduino3.dts
+++ b/arch/arm/dts/sun7i-a20-pcduino3.dts
@@ -164,7 +164,7 @@
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
cd-inverted;
status = "okay";
};
diff --git a/arch/arm/dts/tegra124-nyan-big.dts b/arch/arm/dts/tegra124-nyan-big.dts
index 62f89d0..f1c9705 100644
--- a/arch/arm/dts/tegra124-nyan-big.dts
+++ b/arch/arm/dts/tegra124-nyan-big.dts
@@ -8,7 +8,6 @@
aliases {
console = &uarta;
- stdout-path = &uarta;
i2c0 = "/i2c@7000d000";
i2c1 = "/i2c@7000c000";
i2c2 = "/i2c@7000c400";
@@ -26,6 +25,10 @@
usb2 = "/usb@7d004000";
};
+ chosen {
+ stdout-path = &uarta;
+ };
+
host1x@50000000 {
dc@54200000 {
display-timings {