diff options
Diffstat (limited to 'arch/arm')
-rw-r--r-- | arch/arm/dts/Makefile | 2 | ||||
-rw-r--r-- | arch/arm/dts/rk3399-evb.dts | 39 | ||||
-rw-r--r-- | arch/arm/dts/rk3399-puma.dts | 3 | ||||
-rw-r--r-- | arch/arm/dts/rk3399.dtsi | 16 | ||||
-rw-r--r-- | arch/arm/include/asm/arch-rockchip/grf_rk3399.h | 8 | ||||
-rw-r--r-- | arch/arm/mach-rockchip/Kconfig | 2 | ||||
-rw-r--r-- | arch/arm/mach-rockchip/rk3188-board.c | 18 | ||||
-rw-r--r-- | arch/arm/mach-rockchip/rk3399-board-spl.c | 43 | ||||
-rw-r--r-- | arch/arm/mach-rockchip/rk3399/Kconfig | 19 | ||||
-rw-r--r-- | arch/arm/mach-rockchip/rk3399/syscon_rk3399.c | 1 |
10 files changed, 140 insertions, 11 deletions
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 68d2791..ce34e3e 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -29,12 +29,12 @@ dtb-$(CONFIG_EXYNOS5) += exynos5250-arndale.dtb \ dtb-$(CONFIG_EXYNOS7420) += exynos7420-espresso7420.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3036-sdk.dtb \ + rk3188-radxarock.dtb \ rk3288-evb.dtb \ rk3288-fennec.dtb \ rk3288-firefly.dtb \ rk3288-miqi.dtb \ rk3288-popmetal.dtb \ - rk3188-radxarock.dtb \ rk3288-rock2-square.dtb \ rk3288-tinker.dtb \ rk3288-veyron-jerry.dtb \ diff --git a/arch/arm/dts/rk3399-evb.dts b/arch/arm/dts/rk3399-evb.dts index c3a7ca2..e1f867b 100644 --- a/arch/arm/dts/rk3399-evb.dts +++ b/arch/arm/dts/rk3399-evb.dts @@ -30,6 +30,13 @@ status = "okay"; }; + vccsys: vccsys { + compatible = "regulator-fixed"; + regulator-name = "vccsys"; + regulator-boot-on; + regulator-always-on; + }; + vcc3v3_sys: vcc3v3-sys { compatible = "regulator-fixed"; regulator-name = "vcc3v3_sys"; @@ -51,6 +58,7 @@ regulator-name = "vcc5v0_host"; gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>; }; + }; &emmc_phy { @@ -112,6 +120,37 @@ status = "okay"; }; +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + i2c-scl-falling-time-ns = <50>; + i2c-scl-rising-time-ns = <100>; + u-boot,dm-pre-reloc; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + clock-output-names = "xin32k", "wifibt_32kin"; + interrupt-parent = <&gpio0>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + reg = <0x1b>; + rockchip,system-power-controller; + #clock-cells = <1>; + u-boot,dm-pre-reloc; + status = "okay"; + + vcc12-supply = <&vcc3v3_sys>; + regulators { + vcc33_lcd: SWITCH_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc33_lcd"; + }; + }; + }; +}; + &pinctrl { pmic { pmic_int_l: pmic-int-l { diff --git a/arch/arm/dts/rk3399-puma.dts b/arch/arm/dts/rk3399-puma.dts index 917df1e..50e43c7 100644 --- a/arch/arm/dts/rk3399-puma.dts +++ b/arch/arm/dts/rk3399-puma.dts @@ -1,7 +1,7 @@ /* * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH * - * SPDX-License-Identifier: GPL-2.0+ + * SPDX-License-Identifier: GPL-2.0+ X11 */ /dts-v1/; @@ -91,7 +91,6 @@ &sdmmc { u-boot,dm-pre-reloc; bus-width = <4>; - fifo-mode; /* until we fix DMA in SPL */ status = "okay"; }; diff --git a/arch/arm/dts/rk3399.dtsi b/arch/arm/dts/rk3399.dtsi index dbe55f2..d94d780 100644 --- a/arch/arm/dts/rk3399.dtsi +++ b/arch/arm/dts/rk3399.dtsi @@ -26,6 +26,7 @@ serial4 = &uart4; mmc0 = &sdhci; mmc1 = &sdmmc; + i2c0 = &i2c0; }; cpus { @@ -668,6 +669,21 @@ status = "disabled"; }; + i2c0: i2c@ff3c0000 { + compatible = "rockchip,rk3399-i2c"; + reg = <0x0 0xff3c0000 0x0 0x1000>; + assigned-clocks = <&pmucru SCLK_I2C0_PMU>; + assigned-clock-rates = <200000000>; + clocks = <&pmucru SCLK_I2C0_PMU>, <&pmucru PCLK_I2C0_PMU>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH 0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_xfer>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + pinctrl: pinctrl { u-boot,dm-pre-reloc; compatible = "rockchip,rk3399-pinctrl"; diff --git a/arch/arm/include/asm/arch-rockchip/grf_rk3399.h b/arch/arm/include/asm/arch-rockchip/grf_rk3399.h index b340b05..c424753 100644 --- a/arch/arm/include/asm/arch-rockchip/grf_rk3399.h +++ b/arch/arm/include/asm/arch-rockchip/grf_rk3399.h @@ -337,6 +337,14 @@ enum { GRF_GPIO2B4_SEL_MASK = 3 << GRF_GPIO2B4_SEL_SHIFT, GRF_SPI2TPM_CSN0 = 1, + /* GRF_GPIO2C_IOMUX */ + GRF_GPIO2C0_SEL_SHIFT = 0, + GRF_GPIO2C0_SEL_MASK = 3 << GRF_GPIO2C0_SEL_SHIFT, + GRF_UART0BT_SIN = 1, + GRF_GPIO2C1_SEL_SHIFT = 2, + GRF_GPIO2C1_SEL_MASK = 3 << GRF_GPIO2C1_SEL_SHIFT, + GRF_UART0BT_SOUT = 1, + /* GRF_GPIO3A_IOMUX */ GRF_GPIO3A0_SEL_SHIFT = 0, GRF_GPIO3A0_SEL_MASK = 3 << GRF_GPIO3A0_SEL_SHIFT, diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig index af0796d..2b752ad 100644 --- a/arch/arm/mach-rockchip/Kconfig +++ b/arch/arm/mach-rockchip/Kconfig @@ -18,6 +18,7 @@ config ROCKCHIP_RK3188 select SUPPORT_TPL select SPL select TPL + select BOARD_LATE_INIT select ROCKCHIP_BROM_HELPER help The Rockchip RK3188 is a ARM-based SoC with a quad-core Cortex-A9 @@ -55,6 +56,7 @@ config ROCKCHIP_RK3399 select SPL select SPL_SEPARATE_BSS select ENABLE_ARM_SOC_BOOT0_HOOK + select DEBUG_UART_BOARD_INIT help The Rockchip RK3399 is a ARM-based SoC with a dual-core Cortex-A72 and quad-core Cortex-A53. diff --git a/arch/arm/mach-rockchip/rk3188-board.c b/arch/arm/mach-rockchip/rk3188-board.c index c370156..4be711e 100644 --- a/arch/arm/mach-rockchip/rk3188-board.c +++ b/arch/arm/mach-rockchip/rk3188-board.c @@ -11,6 +11,7 @@ #include <syscon.h> #include <asm/io.h> #include <asm/arch/clock.h> +#include <asm/arch/grf_rk3188.h> #include <asm/arch/periph.h> #include <asm/arch/pmu_rk3288.h> #include <asm/arch/boot_mode.h> @@ -19,6 +20,23 @@ DECLARE_GLOBAL_DATA_PTR; +int board_late_init(void) +{ + struct rk3188_grf *grf; + + grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF); + if (IS_ERR(grf)) { + error("grf syscon returned %ld\n", PTR_ERR(grf)); + } else { + /* enable noc remap to mimic legacy loaders */ + rk_clrsetreg(&grf->soc_con0, + NOC_REMAP_MASK << NOC_REMAP_SHIFT, + NOC_REMAP_MASK << NOC_REMAP_SHIFT); + } + + return 0; +} + int board_init(void) { #if defined(CONFIG_ROCKCHIP_SPL_BACK_TO_BROM) diff --git a/arch/arm/mach-rockchip/rk3399-board-spl.c b/arch/arm/mach-rockchip/rk3399-board-spl.c index 4f84ec1..050f5e1 100644 --- a/arch/arm/mach-rockchip/rk3399-board-spl.c +++ b/arch/arm/mach-rockchip/rk3399-board-spl.c @@ -156,19 +156,24 @@ void secure_timer_init(void) writel(TIMER_EN | TIMER_FMODE, TIMER_CHN10_BASE + TIMER_CONTROL_REG); } -#define GRF_EMMCCORE_CON11 0xff77f02c -void board_init_f(ulong dummy) -{ - struct udevice *pinctrl; - struct udevice *dev; - int ret; +#define SGRF_DDR_RGN_CON16 0xff330040 - /* Example code showing how to enable the debug UART on RK3288 */ +void board_debug_uart_init(void) +{ #include <asm/arch/grf_rk3399.h> - /* Enable early UART2 channel C on the RK3399 */ #define GRF_BASE 0xff770000 struct rk3399_grf_regs * const grf = (void *)GRF_BASE; +#if defined(CONFIG_DEBUG_UART_BASE) && (CONFIG_DEBUG_UART_BASE == 0xff180000) + /* Enable early UART0 on the RK3399 */ + rk_clrsetreg(&grf->gpio2c_iomux, + GRF_GPIO2C0_SEL_MASK, + GRF_UART0BT_SIN << GRF_GPIO2C0_SEL_SHIFT); + rk_clrsetreg(&grf->gpio2c_iomux, + GRF_GPIO2C1_SEL_MASK, + GRF_UART0BT_SOUT << GRF_GPIO2C1_SEL_SHIFT); +#else + /* Enable early UART2 channel C on the RK3399 */ rk_clrsetreg(&grf->gpio4c_iomux, GRF_GPIO4C3_SEL_MASK, GRF_UART2DGBC_SIN << GRF_GPIO4C3_SEL_SHIFT); @@ -179,6 +184,16 @@ void board_init_f(ulong dummy) rk_clrsetreg(&grf->soc_con7, GRF_UART_DBG_SEL_MASK, GRF_UART_DBG_SEL_C << GRF_UART_DBG_SEL_SHIFT); +#endif +} + +#define GRF_EMMCCORE_CON11 0xff77f02c +void board_init_f(ulong dummy) +{ + struct udevice *pinctrl; + struct udevice *dev; + int ret; + #define EARLY_UART #ifdef EARLY_UART /* @@ -201,6 +216,17 @@ void board_init_f(ulong dummy) hang(); } + /* + * Disable DDR security regions. + * + * As we are entered from the BootROM, the region from + * 0x0 through 0xfffff (i.e. the first MB of memory) will + * be protected. This will cause issues with the DW_MMC + * driver, which tries to DMA from/to the stack (likely) + * located in this range. + */ + rk_clrsetreg(SGRF_DDR_RGN_CON16, 0x1FF, 0); + secure_timer_init(); ret = uclass_get_device(UCLASS_PINCTRL, 0, &pinctrl); @@ -238,6 +264,7 @@ void spl_board_init(void) #ifdef CONFIG_ROCKCHIP_SPL_BACK_TO_BROM back_to_bootrom(); #endif + return; err: printf("spl_board_init: Error %d\n", ret); diff --git a/arch/arm/mach-rockchip/rk3399/Kconfig b/arch/arm/mach-rockchip/rk3399/Kconfig index 83bd04a..415466a 100644 --- a/arch/arm/mach-rockchip/rk3399/Kconfig +++ b/arch/arm/mach-rockchip/rk3399/Kconfig @@ -10,6 +10,24 @@ config TARGET_EVB_RK3399 with full function and phisical connectors support like type-C ports, usb2.0 host ports, LVDS, JTAG, MAC, SDcard, HDMI, USB-2-serial... +config TARGET_PUMA_RK3399 + bool "Theobroma Systems RK3399-Q7 (Puma)" + help + The RK3399-Q7 (Puma) is a system-on-module (designed and + marketed by Theobroma Systems) featuring the Rockchip RK3399 + in a Qseven-compatible form-factor (running of a single 5V + supply and exposing its external interfaces on a MXM-230 + connector). + + Key features of the RK3399-Q7 include: + * on-module USB 3.0 hub (2x USB 3.0 host + 1x USB 2.0 host) + * USB 3.0 dual-role + * on-module Micrel KSZ9031 GbE PHY + * on-module eMMC (up to 256GB configurations available) + * on-module DDR3 (1GB, 2GB and 4GB configurations available) + * HDMI, eDP, MIPI-DSI, MIPI-DSI/CSI and MIPI-CSI + * SPI, I2C, I2S, UART, GPIO, ... + endchoice config SYS_SOC @@ -19,5 +37,6 @@ config SYS_MALLOC_F_LEN default 0x0800 source "board/rockchip/evb_rk3399/Kconfig" +source "board/theobroma-systems/puma_rk3399/Kconfig" endif diff --git a/arch/arm/mach-rockchip/rk3399/syscon_rk3399.c b/arch/arm/mach-rockchip/rk3399/syscon_rk3399.c index d32985b..74d4552 100644 --- a/arch/arm/mach-rockchip/rk3399/syscon_rk3399.c +++ b/arch/arm/mach-rockchip/rk3399/syscon_rk3399.c @@ -14,6 +14,7 @@ static const struct udevice_id rk3399_syscon_ids[] = { { .compatible = "rockchip,rk3399-pmugrf", .data = ROCKCHIP_SYSCON_PMUGRF }, { .compatible = "rockchip,rk3399-pmusgrf", .data = ROCKCHIP_SYSCON_PMUSGRF }, { .compatible = "rockchip,rk3399-cic", .data = ROCKCHIP_SYSCON_CIC }, + { } }; U_BOOT_DRIVER(syscon_rk3399) = { |