summaryrefslogtreecommitdiff
path: root/arch/arm
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/cpu/armv7/omap-common/Makefile4
-rw-r--r--arch/arm/cpu/armv7/omap-common/pipe3-phy.c231
-rw-r--r--arch/arm/cpu/armv7/omap-common/pipe3-phy.h36
3 files changed, 271 insertions, 0 deletions
diff --git a/arch/arm/cpu/armv7/omap-common/Makefile b/arch/arm/cpu/armv7/omap-common/Makefile
index 4d3a165..bfaf814 100644
--- a/arch/arm/cpu/armv7/omap-common/Makefile
+++ b/arch/arm/cpu/armv7/omap-common/Makefile
@@ -17,6 +17,10 @@ obj-y += vc.o
obj-y += abb.o
endif
+ifneq ($(CONFIG_OMAP54XX),)
+COBJS += pipe3-phy.o
+endif
+
ifeq ($(CONFIG_OMAP34XX),)
obj-y += boot-common.o
obj-y += lowlevel_init.o
diff --git a/arch/arm/cpu/armv7/omap-common/pipe3-phy.c b/arch/arm/cpu/armv7/omap-common/pipe3-phy.c
new file mode 100644
index 0000000..b71d769
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap-common/pipe3-phy.c
@@ -0,0 +1,231 @@
+/*
+ * TI PIPE3 PHY
+ *
+ * (C) Copyright 2013
+ * Texas Instruments, <www.ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <sata.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/io.h>
+#include <asm/errno.h>
+#include "pipe3-phy.h"
+
+/* PLLCTRL Registers */
+#define PLL_STATUS 0x00000004
+#define PLL_GO 0x00000008
+#define PLL_CONFIGURATION1 0x0000000C
+#define PLL_CONFIGURATION2 0x00000010
+#define PLL_CONFIGURATION3 0x00000014
+#define PLL_CONFIGURATION4 0x00000020
+
+#define PLL_REGM_MASK 0x001FFE00
+#define PLL_REGM_SHIFT 9
+#define PLL_REGM_F_MASK 0x0003FFFF
+#define PLL_REGM_F_SHIFT 0
+#define PLL_REGN_MASK 0x000001FE
+#define PLL_REGN_SHIFT 1
+#define PLL_SELFREQDCO_MASK 0x0000000E
+#define PLL_SELFREQDCO_SHIFT 1
+#define PLL_SD_MASK 0x0003FC00
+#define PLL_SD_SHIFT 10
+#define SET_PLL_GO 0x1
+#define PLL_TICOPWDN BIT(16)
+#define PLL_LDOPWDN BIT(15)
+#define PLL_LOCK 0x2
+#define PLL_IDLE 0x1
+
+/* PHY POWER CONTROL Register */
+#define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK 0x003FC000
+#define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT 0xE
+
+#define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_MASK 0xFFC00000
+#define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT 0x16
+
+#define OMAP_CTRL_PIPE3_PHY_TX_RX_POWERON 0x3
+#define OMAP_CTRL_PIPE3_PHY_TX_RX_POWEROFF 0x0
+
+
+#define PLL_IDLE_TIME 100 /* in milliseconds */
+#define PLL_LOCK_TIME 100 /* in milliseconds */
+
+static inline u32 omap_pipe3_readl(void __iomem *addr, unsigned offset)
+{
+ return __raw_readl(addr + offset);
+}
+
+static inline void omap_pipe3_writel(void __iomem *addr, unsigned offset,
+ u32 data)
+{
+ __raw_writel(data, addr + offset);
+}
+
+static struct pipe3_dpll_params *omap_pipe3_get_dpll_params(struct omap_pipe3
+ *pipe3)
+{
+ u32 rate;
+ struct pipe3_dpll_map *dpll_map = pipe3->dpll_map;
+
+ rate = get_sys_clk_freq();
+
+ for (; dpll_map->rate; dpll_map++) {
+ if (rate == dpll_map->rate)
+ return &dpll_map->params;
+ }
+
+ printf("%s: No DPLL configuration for %u Hz SYS CLK\n",
+ __func__, rate);
+ return NULL;
+}
+
+
+static int omap_pipe3_wait_lock(struct omap_pipe3 *phy)
+{
+ u32 val;
+ int timeout = PLL_LOCK_TIME;
+
+ do {
+ mdelay(1);
+ val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS);
+ if (val & PLL_LOCK)
+ break;
+ } while (--timeout);
+
+ if (!(val & PLL_LOCK)) {
+ printf("%s: DPLL failed to lock\n", __func__);
+ return -EBUSY;
+ }
+
+ return 0;
+}
+
+static int omap_pipe3_dpll_program(struct omap_pipe3 *phy)
+{
+ u32 val;
+ struct pipe3_dpll_params *dpll_params;
+
+ dpll_params = omap_pipe3_get_dpll_params(phy);
+ if (!dpll_params) {
+ printf("%s: Invalid DPLL parameters\n", __func__);
+ return -EINVAL;
+ }
+
+ val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION1);
+ val &= ~PLL_REGN_MASK;
+ val |= dpll_params->n << PLL_REGN_SHIFT;
+ omap_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION1, val);
+
+ val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2);
+ val &= ~PLL_SELFREQDCO_MASK;
+ val |= dpll_params->freq << PLL_SELFREQDCO_SHIFT;
+ omap_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val);
+
+ val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION1);
+ val &= ~PLL_REGM_MASK;
+ val |= dpll_params->m << PLL_REGM_SHIFT;
+ omap_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION1, val);
+
+ val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION4);
+ val &= ~PLL_REGM_F_MASK;
+ val |= dpll_params->mf << PLL_REGM_F_SHIFT;
+ omap_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION4, val);
+
+ val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION3);
+ val &= ~PLL_SD_MASK;
+ val |= dpll_params->sd << PLL_SD_SHIFT;
+ omap_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION3, val);
+
+ omap_pipe3_writel(phy->pll_ctrl_base, PLL_GO, SET_PLL_GO);
+
+ return omap_pipe3_wait_lock(phy);
+}
+
+static void omap_control_phy_power(struct omap_pipe3 *phy, int on)
+{
+ u32 val, rate;
+
+ val = readl(phy->power_reg);
+
+ rate = get_sys_clk_freq();
+ rate = rate/1000000;
+
+ if (on) {
+ val &= ~(OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK |
+ OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_MASK);
+ val |= OMAP_CTRL_PIPE3_PHY_TX_RX_POWERON <<
+ OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT;
+ val |= rate <<
+ OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT;
+ } else {
+ val &= ~OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK;
+ val |= OMAP_CTRL_PIPE3_PHY_TX_RX_POWEROFF <<
+ OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT;
+ }
+
+ writel(val, phy->power_reg);
+}
+
+int phy_pipe3_power_on(struct omap_pipe3 *phy)
+{
+ int ret;
+ u32 val;
+
+ /* Program the DPLL only if not locked */
+ val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS);
+ if (!(val & PLL_LOCK)) {
+ ret = omap_pipe3_dpll_program(phy);
+ if (ret)
+ return ret;
+ } else {
+ /* else just bring it out of IDLE mode */
+ val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2);
+ if (val & PLL_IDLE) {
+ val &= ~PLL_IDLE;
+ omap_pipe3_writel(phy->pll_ctrl_base,
+ PLL_CONFIGURATION2, val);
+ ret = omap_pipe3_wait_lock(phy);
+ if (ret)
+ return ret;
+ }
+ }
+
+ /* Power up the PHY */
+ omap_control_phy_power(phy, 1);
+
+ return 0;
+}
+
+int phy_pipe3_power_off(struct omap_pipe3 *phy)
+{
+ u32 val;
+ int timeout = PLL_IDLE_TIME;
+
+ /* Power down the PHY */
+ omap_control_phy_power(phy, 0);
+
+ /* Put DPLL in IDLE mode */
+ val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2);
+ val |= PLL_IDLE;
+ omap_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val);
+
+ /* wait for LDO and Oscillator to power down */
+ do {
+ mdelay(1);
+ val = omap_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS);
+ if ((val & PLL_TICOPWDN) && (val & PLL_LDOPWDN))
+ break;
+ } while (--timeout);
+
+ if (!(val & PLL_TICOPWDN) || !(val & PLL_LDOPWDN)) {
+ printf("%s: Failed to power down DPLL: PLL_STATUS 0x%x\n",
+ __func__, val);
+ return -EBUSY;
+ }
+
+ return 0;
+}
+
diff --git a/arch/arm/cpu/armv7/omap-common/pipe3-phy.h b/arch/arm/cpu/armv7/omap-common/pipe3-phy.h
new file mode 100644
index 0000000..441f49a
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap-common/pipe3-phy.h
@@ -0,0 +1,36 @@
+/*
+ * TI PIPE3 PHY
+ *
+ * (C) Copyright 2013
+ * Texas Instruments, <www.ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __OMAP_PIPE3_PHY_H
+#define __OMAP_PIPE3_PHY_H
+
+struct pipe3_dpll_params {
+ u16 m;
+ u8 n;
+ u8 freq:3;
+ u8 sd;
+ u32 mf;
+};
+
+struct pipe3_dpll_map {
+ unsigned long rate;
+ struct pipe3_dpll_params params;
+};
+
+struct omap_pipe3 {
+ void __iomem *pll_ctrl_base;
+ void __iomem *power_reg;
+ struct pipe3_dpll_map *dpll_map;
+};
+
+
+int phy_pipe3_power_on(struct omap_pipe3 *phy);
+int phy_pipe3_power_off(struct omap_pipe3 *pipe3);
+
+#endif /* __OMAP_PIPE3_PHY_H */
generated by cgit v0.10.2 at 2024-11-06 05:43:50 (GMT)