diff options
Diffstat (limited to 'arch')
-rw-r--r-- | arch/arm/Kconfig | 3 | ||||
-rw-r--r-- | arch/arm/include/asm/arch-bcmcygnus/configs.h | 6 | ||||
-rw-r--r-- | arch/arm/mach-mvebu/include/mach/config.h | 2 | ||||
-rw-r--r-- | arch/arm/mach-omap2/Kconfig | 5 | ||||
-rw-r--r-- | arch/arm/mach-omap2/omap3/clock.c | 2 | ||||
-rw-r--r-- | arch/powerpc/include/asm/config.h | 5 | ||||
-rw-r--r-- | arch/x86/include/asm/io.h | 74 | ||||
-rw-r--r-- | arch/x86/lib/acpi_s3.c | 1 |
8 files changed, 19 insertions, 79 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 7f6ab4a..9cfeede 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -523,6 +523,9 @@ config TARGET_BCMCYGNUS imply CMD_HASH imply FAT_WRITE imply HASH_VERIFY + imply NETDEVICES + imply BCM_SF2_ETH + imply BCM_SF2_ETH_GMAC config TARGET_BCMNSP bool "Support bcmnsp" diff --git a/arch/arm/include/asm/arch-bcmcygnus/configs.h b/arch/arm/include/asm/arch-bcmcygnus/configs.h index af7f3bf..92b1c5e 100644 --- a/arch/arm/include/asm/arch-bcmcygnus/configs.h +++ b/arch/arm/include/asm/arch-bcmcygnus/configs.h @@ -1,5 +1,5 @@ /* - * Copyright 2014 Broadcom Corporation. + * Copyright 2014-2017 Broadcom. * * SPDX-License-Identifier: GPL-2.0+ */ @@ -23,10 +23,6 @@ #define CONFIG_SYS_NS16550_COM3 0x18023000 /* Ethernet */ -#define CONFIG_BCM_SF2_ETH -#define CONFIG_BCM_SF2_ETH_GMAC - -#define CONFIG_PHYLIB #define CONFIG_PHY_BROADCOM #define CONFIG_PHY_RESET_DELAY 10000 /* PHY reset delay in us*/ diff --git a/arch/arm/mach-mvebu/include/mach/config.h b/arch/arm/mach-mvebu/include/mach/config.h index 1b35e08..2dc9b1d 100644 --- a/arch/arm/mach-mvebu/include/mach/config.h +++ b/arch/arm/mach-mvebu/include/mach/config.h @@ -78,10 +78,8 @@ #define CONFIG_MII /* expose smi ove miiphy interface */ #if !defined(CONFIG_ARMADA_375) #define CONFIG_MVNETA /* Enable Marvell Gbe Controller Driver */ -#define CONFIG_PHYLIB #endif #define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */ -#define CONFIG_PHY_GIGE /* GbE speed/duplex detect */ #define CONFIG_ARP_TIMEOUT 200 #define CONFIG_NET_RETRY_COUNT 50 #endif /* CONFIG_CMD_NET */ diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 013586e..89c91d1 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -22,6 +22,7 @@ config OMAP34XX imply SPL_NAND_SUPPORT imply SPL_POWER_SUPPORT imply SPL_SERIAL_SUPPORT + imply SYS_I2C_OMAP24XX imply SYS_THUMB_BUILD imply TWL4030_POWER @@ -40,6 +41,7 @@ config OMAP44XX imply SPL_NAND_SUPPORT imply SPL_POWER_SUPPORT imply SPL_SERIAL_SUPPORT + imply SYS_I2C_OMAP24XX imply SYS_THUMB_BUILD config OMAP54XX @@ -59,6 +61,7 @@ config OMAP54XX imply SPL_NAND_SUPPORT imply SPL_POWER_SUPPORT imply SPL_SERIAL_SUPPORT + imply SYS_I2C_OMAP24XX config TI814X bool "TI814X SoC" @@ -82,6 +85,7 @@ config AM43XX imply SPL_OF_TRANSLATE imply SPL_SEPARATE_BSS imply SPL_SYS_MALLOC_SIMPLE + imply SYS_I2C_OMAP24XX imply SYS_THUMB_BUILD help Support for AM43xx SOC from Texas Instruments. @@ -92,6 +96,7 @@ config AM43XX config AM33XX bool "AM33XX SoC" + imply SYS_I2C_OMAP24XX imply SYS_THUMB_BUILD imply USE_TINY_PRINTF help diff --git a/arch/arm/mach-omap2/omap3/clock.c b/arch/arm/mach-omap2/omap3/clock.c index 006969e..3daae61 100644 --- a/arch/arm/mach-omap2/omap3/clock.c +++ b/arch/arm/mach-omap2/omap3/clock.c @@ -772,7 +772,7 @@ void per_clocks_enable(void) setbits_le32(&prcm_base->iclken_per, 0x00020000); #endif -#ifdef CONFIG_SYS_I2C_OMAP34XX +#ifdef CONFIG_SYS_I2C_OMAP24XX /* Turn on all 3 I2C clocks */ setbits_le32(&prcm_base->fclken1_core, 0x00038000); setbits_le32(&prcm_base->iclken1_core, 0x00038000); /* I2C1,2,3 = on */ diff --git a/arch/powerpc/include/asm/config.h b/arch/powerpc/include/asm/config.h index eaa23d2..6aec815 100644 --- a/arch/powerpc/include/asm/config.h +++ b/arch/powerpc/include/asm/config.h @@ -74,16 +74,11 @@ /* The TSEC driver uses the PHYLIB infrastructure */ #ifndef CONFIG_PHYLIB #if defined(CONFIG_TSEC_ENET) -#define CONFIG_PHYLIB - #include <config_phylib_all_drivers.h> #endif /* TSEC_ENET */ #endif /* !CONFIG_PHYLIB */ /* The FMAN driver uses the PHYLIB infrastructure */ -#if defined(CONFIG_FMAN_ENET) -#define CONFIG_PHYLIB -#endif /* All PPC boards must swap IDE bytes */ #define CONFIG_IDE_SWAP_IO diff --git a/arch/x86/include/asm/io.h b/arch/x86/include/asm/io.h index 3156781..a72daf2 100644 --- a/arch/x86/include/asm/io.h +++ b/arch/x86/include/asm/io.h @@ -1,3 +1,10 @@ +/* + * (C) Copyright 2000-2002 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + #ifndef _ASM_IO_H #define _ASM_IO_H @@ -118,71 +125,6 @@ #define setbits_8(addr, set) setbits(8, addr, set) #define clrsetbits_8(addr, clear, set) clrsetbits(8, addr, clear, set) -/* - * ISA space is 'always mapped' on a typical x86 system, no need to - * explicitly ioremap() it. The fact that the ISA IO space is mapped - * to PAGE_OFFSET is pure coincidence - it does not mean ISA values - * are physical addresses. The following constant pointer can be - * used as the IO-area pointer (it can be iounmapped as well, so the - * analogy with PCI is quite large): - */ -#define isa_readb(a) readb((a)) -#define isa_readw(a) readw((a)) -#define isa_readl(a) readl((a)) -#define isa_writeb(b,a) writeb(b,(a)) -#define isa_writew(w,a) writew(w,(a)) -#define isa_writel(l,a) writel(l,(a)) -#define isa_memset_io(a,b,c) memset_io((a),(b),(c)) -#define isa_memcpy_fromio(a,b,c) memcpy_fromio((a),(b),(c)) -#define isa_memcpy_toio(a,b,c) memcpy_toio((a),(b),(c)) - - -static inline int check_signature(unsigned long io_addr, - const unsigned char *signature, int length) -{ - int retval = 0; - do { - if (readb(io_addr) != *signature) - goto out; - io_addr++; - signature++; - length--; - } while (length); - retval = 1; -out: - return retval; -} - -/** - * isa_check_signature - find BIOS signatures - * @io_addr: mmio address to check - * @signature: signature block - * @length: length of signature - * - * Perform a signature comparison with the ISA mmio address io_addr. - * Returns 1 on a match. - * - * This function is deprecated. New drivers should use ioremap and - * check_signature. - */ - - -static inline int isa_check_signature(unsigned long io_addr, - const unsigned char *signature, int length) -{ - int retval = 0; - do { - if (isa_readb(io_addr) != *signature) - goto out; - io_addr++; - signature++; - length--; - } while (length); - retval = 1; -out: - return retval; -} - #endif /* __KERNEL__ */ #ifdef SLOW_IO_BY_JUMPING @@ -325,4 +267,4 @@ static inline phys_addr_t virt_to_phys(void * vaddr) #define __iormb() dmb() #define __iowmb() dmb() -#endif +#endif /* _ASM_IO_H */ diff --git a/arch/x86/lib/acpi_s3.c b/arch/x86/lib/acpi_s3.c index 3175da8..182379b 100644 --- a/arch/x86/lib/acpi_s3.c +++ b/arch/x86/lib/acpi_s3.c @@ -8,6 +8,7 @@ #include <asm/acpi_s3.h> #include <asm/acpi_table.h> #include <asm/post.h> +#include <linux/linkage.h> DECLARE_GLOBAL_DATA_PTR; |