summaryrefslogtreecommitdiff
path: root/board/MAI/AmigaOneG3SE/enet.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/MAI/AmigaOneG3SE/enet.c')
-rw-r--r--board/MAI/AmigaOneG3SE/enet.c840
1 files changed, 0 insertions, 840 deletions
diff --git a/board/MAI/AmigaOneG3SE/enet.c b/board/MAI/AmigaOneG3SE/enet.c
deleted file mode 100644
index b9df55c..0000000
--- a/board/MAI/AmigaOneG3SE/enet.c
+++ /dev/null
@@ -1,840 +0,0 @@
-/*
- * (C) Copyright 2002
- * Adam Kowalczyk, ACK Software Controls Inc. akowalczyk@cogeco.ca
- *
- * Some portions taken from 3c59x.c Written 1996-1999 by Donald Becker.
- *
- * Outline of the program based on eepro100.c which is
- *
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <malloc.h>
-#include <net.h>
-#include <netdev.h>
-#include <asm/io.h>
-#include <pci.h>
-
-#include "articiaS.h"
-#include "memio.h"
-
-/* 3Com Ethernet PCI definitions*/
-
-/* #define PCI_VENDOR_ID_3COM 0x10B7 */
-#define PCI_DEVICE_ID_3COM_3C905C 0x9200
-
-/* 3Com Commands, top 5 bits are command and bottom 11 bits are parameters */
-
-#define TotalReset (0<<11)
-#define SelectWindow (1<<11)
-#define StartCoax (2<<11)
-#define RxDisable (3<<11)
-#define RxEnable (4<<11)
-#define RxReset (5<<11)
-#define UpStall (6<<11)
-#define UpUnstall (6<<11)+1
-#define DownStall (6<<11)+2
-#define DownUnstall (6<<11)+3
-#define RxDiscard (8<<11)
-#define TxEnable (9<<11)
-#define TxDisable (10<<11)
-#define TxReset (11<<11)
-#define FakeIntr (12<<11)
-#define AckIntr (13<<11)
-#define SetIntrEnb (14<<11)
-#define SetStatusEnb (15<<11)
-#define SetRxFilter (16<<11)
-#define SetRxThreshold (17<<11)
-#define SetTxThreshold (18<<11)
-#define SetTxStart (19<<11)
-#define StartDMAUp (20<<11)
-#define StartDMADown (20<<11)+1
-#define StatsEnable (21<<11)
-#define StatsDisable (22<<11)
-#define StopCoax (23<<11)
-#define SetFilterBit (25<<11)
-
-/* The SetRxFilter command accepts the following classes */
-
-#define RxStation 1
-#define RxMulticast 2
-#define RxBroadcast 4
-#define RxProm 8
-
-/* 3Com status word defnitions */
-
-#define IntLatch 0x0001
-#define HostError 0x0002
-#define TxComplete 0x0004
-#define TxAvailable 0x0008
-#define RxComplete 0x0010
-#define RxEarly 0x0020
-#define IntReq 0x0040
-#define StatsFull 0x0080
-#define DMADone (1<<8)
-#define DownComplete (1<<9)
-#define UpComplete (1<<10)
-#define DMAInProgress (1<<11) /* DMA controller is still busy.*/
-#define CmdInProgress (1<<12) /* EL3_CMD is still busy.*/
-
-/* Polling Registers */
-
-#define DnPoll 0x2d
-#define UpPoll 0x3d
-
-/* Register window 0 offets */
-
-#define Wn0EepromCmd 10 /* Window 0: EEPROM command register. */
-#define Wn0EepromData 12 /* Window 0: EEPROM results register. */
-#define IntrStatus 0x0E /* Valid in all windows. */
-
-/* Register window 0 EEPROM bits */
-
-#define EEPROM_Read 0x80
-#define EEPROM_WRITE 0x40
-#define EEPROM_ERASE 0xC0
-#define EEPROM_EWENB 0x30 /* Enable erasing/writing for 10 msec. */
-#define EEPROM_EWDIS 0x00 /* Disable EWENB before 10 msec timeout. */
-
-/* EEPROM locations. */
-
-#define PhysAddr01 0
-#define PhysAddr23 1
-#define PhysAddr45 2
-#define ModelID 3
-#define EtherLink3ID 7
-#define IFXcvrIO 8
-#define IRQLine 9
-#define NodeAddr01 10
-#define NodeAddr23 11
-#define NodeAddr45 12
-#define DriverTune 13
-#define Checksum 15
-
-/* Register window 1 offsets, the window used in normal operation */
-
-#define TX_FIFO 0x10
-#define RX_FIFOa 0x10
-#define RxErrors 0x14
-#define RxStatus 0x18
-#define Timer 0x1A
-#define TxStatus 0x1B
-#define TxFree 0x1C /* Remaining free bytes in Tx buffer. */
-
-/* Register Window 2 */
-
-#define Wn2_ResetOptions 12
-
-/* Register Window 3: MAC/config bits */
-
-#define Wn3_Config 0 /* Internal Configuration */
-#define Wn3_MAC_Ctrl 6
-#define Wn3_Options 8
-
-#define BFEXT(value, offset, bitcount) \
- ((((unsigned long)(value)) >> (offset)) & ((1 << (bitcount)) - 1))
-
-#define BFINS(lhs, rhs, offset, bitcount) \
- (((lhs) & ~((((1 << (bitcount)) - 1)) << (offset))) | \
- (((rhs) & ((1 << (bitcount)) - 1)) << (offset)))
-
-#define RAM_SIZE(v) BFEXT(v, 0, 3)
-#define RAM_WIDTH(v) BFEXT(v, 3, 1)
-#define RAM_SPEED(v) BFEXT(v, 4, 2)
-#define ROM_SIZE(v) BFEXT(v, 6, 2)
-#define RAM_SPLIT(v) BFEXT(v, 16, 2)
-#define XCVR(v) BFEXT(v, 20, 4)
-#define AUTOSELECT(v) BFEXT(v, 24, 1)
-
-/* Register Window 4: Xcvr/media bits */
-
-#define Wn4_FIFODiag 4
-#define Wn4_NetDiag 6
-#define Wn4_PhysicalMgmt 8
-#define Wn4_Media 10
-
-#define Media_SQE 0x0008 /* Enable SQE error counting for AUI. */
-#define Media_10TP 0x00C0 /* Enable link beat and jabber for 10baseT. */
-#define Media_Lnk 0x0080 /* Enable just link beat for 100TX/100FX. */
-#define Media_LnkBeat 0x0800
-
-/* Register Window 7: Bus Master control */
-
-#define Wn7_MasterAddr 0
-#define Wn7_MasterLen 6
-#define Wn7_MasterStatus 12
-
-/* Boomerang bus master control registers. */
-
-#define PktStatus 0x20
-#define DownListPtr 0x24
-#define FragAddr 0x28
-#define FragLen 0x2c
-#define TxFreeThreshold 0x2f
-#define UpPktStatus 0x30
-#define UpListPtr 0x38
-
-/* The Rx and Tx descriptor lists. */
-
-#define LAST_FRAG 0x80000000 /* Last Addr/Len pair in descriptor. */
-#define DN_COMPLETE 0x00010000 /* This packet has been downloaded */
-
-struct rx_desc_3com {
- u32 next; /* Last entry points to 0 */
- u32 status; /* FSH -> Frame Start Header */
- u32 addr; /* Up to 63 addr/len pairs possible */
- u32 length; /* Set LAST_FRAG to indicate last pair */
-};
-
-/* Values for the Rx status entry. */
-
-#define RxDComplete 0x00008000
-#define RxDError 0x4000
-#define IPChksumErr (1<<25)
-#define TCPChksumErr (1<<26)
-#define UDPChksumErr (1<<27)
-#define IPChksumValid (1<<29)
-#define TCPChksumValid (1<<30)
-#define UDPChksumValid (1<<31)
-
-struct tx_desc_3com {
- u32 next; /* Last entry points to 0 */
- u32 status; /* bits 0:12 length, others see below */
- u32 addr;
- u32 length;
-};
-
-/* Values for the Tx status entry. */
-
-#define CRCDisable 0x2000
-#define TxDComplete 0x8000
-#define AddIPChksum 0x02000000
-#define AddTCPChksum 0x04000000
-#define AddUDPChksum 0x08000000
-#define TxIntrUploaded 0x80000000 /* IRQ when in FIFO, but maybe not sent. */
-
-/* XCVR Types */
-
-#define XCVR_10baseT 0
-#define XCVR_AUI 1
-#define XCVR_10baseTOnly 2
-#define XCVR_10base2 3
-#define XCVR_100baseTx 4
-#define XCVR_100baseFx 5
-#define XCVR_MII 6
-#define XCVR_NWAY 8
-#define XCVR_ExtMII 9
-#define XCVR_Default 10 /* I don't think this is correct -> should have been 0x10 if Auto Negotiate */
-
-struct descriptor { /* A generic descriptor. */
- u32 next; /* Last entry points to 0 */
- u32 status; /* FSH -> Frame Start Header */
- u32 addr; /* Up to 63 addr/len pairs possible */
- u32 length; /* Set LAST_FRAG to indicate last pair */
-};
-
-/* Misc. definitions */
-
-#define NUM_RX_DESC PKTBUFSRX * 10
-#define NUM_TX_DESC 1 /* Number of TX descriptors */
-
-#define TOUT_LOOP 1000000
-
-#define ETH_ALEN 6
-
-#define EL3WINDOW(dev, win_num) ETH_OUTW(dev, SelectWindow + (win_num), EL3_CMD)
-#define EL3_CMD 0x0e
-#define EL3_STATUS 0x0e
-
-
-#undef ETH_DEBUG
-
-#ifdef ETH_DEBUG
-#define PRINTF(fmt,args...) printf (fmt ,##args)
-#else
-#define PRINTF(fmt,args...)
-#endif
-
-
-static struct rx_desc_3com *rx_ring; /* RX descriptor ring */
-static struct tx_desc_3com *tx_ring; /* TX descriptor ring */
-static u8 rx_buffer[NUM_RX_DESC][PKTSIZE_ALIGN];/* storage for the incoming messages */
-static int rx_next = 0; /* RX descriptor ring pointer */
-static int tx_next = 0; /* TX descriptor ring pointer */
-static int tx_threshold;
-
-static void init_rx_ring(struct eth_device* dev);
-static void purge_tx_ring(struct eth_device* dev);
-
-static void read_hw_addr(struct eth_device* dev, bd_t * bis);
-
-static int eth_3com_init(struct eth_device* dev, bd_t *bis);
-static int eth_3com_send(struct eth_device* dev, volatile void *packet, int length);
-static int eth_3com_recv(struct eth_device* dev);
-static void eth_3com_halt(struct eth_device* dev);
-
-#define io_to_phys(a) pci_io_to_phys((pci_dev_t)dev->priv, a)
-#define phys_to_io(a) pci_phys_to_io((pci_dev_t)dev->priv, a)
-#define mem_to_phys(a) pci_mem_to_phys((pci_dev_t)dev->priv, a)
-#define phys_to_mem(a) pci_phys_to_mem((pci_dev_t)dev->priv, a)
-
-static inline int ETH_INL(struct eth_device* dev, u_long addr)
-{
- __asm__ volatile ("eieio");
- return le32_to_cpu(*(volatile u32 *)io_to_phys(addr + dev->iobase));
-}
-
-static inline int ETH_INW(struct eth_device* dev, u_long addr)
-{
- __asm__ volatile ("eieio");
- return le16_to_cpu(*(volatile u16 *)io_to_phys(addr + dev->iobase));
-}
-
-static inline int ETH_INB(struct eth_device* dev, u_long addr)
-{
- __asm__ volatile ("eieio");
- return *(volatile u8 *)io_to_phys(addr + dev->iobase);
-}
-
-static inline void ETH_OUTB(struct eth_device* dev, int command, u_long addr)
-{
- *(volatile u8 *)io_to_phys(addr + dev->iobase) = command;
- __asm__ volatile ("eieio");
-}
-
-static inline void ETH_OUTW(struct eth_device* dev, int command, u_long addr)
-{
- *(volatile u16 *)io_to_phys(addr + dev->iobase) = cpu_to_le16(command);
- __asm__ volatile ("eieio");
-}
-
-static inline void ETH_OUTL(struct eth_device* dev, int command, u_long addr)
-{
- *(volatile u32 *)io_to_phys(addr + dev->iobase) = cpu_to_le32(command);
- __asm__ volatile ("eieio");
-}
-
-static inline int ETH_STATUS(struct eth_device* dev)
-{
- __asm__ volatile ("eieio");
- return le16_to_cpu(*(volatile u16 *)io_to_phys(EL3_STATUS + dev->iobase));
-}
-
-static inline void ETH_CMD(struct eth_device* dev, int command)
-{
- *(volatile u16 *)io_to_phys(EL3_CMD + dev->iobase) = cpu_to_le16(command);
- __asm__ volatile ("eieio");
-}
-
-/* Command register is always in the same spot in all the register windows */
-/* This function issues a command and waits for it so complete by checking the CmdInProgress bit */
-
-static int issue_and_wait(struct eth_device* dev, int command)
-{
-
- int i, status;
-
- ETH_CMD(dev, command);
- for (i = 0; i < 2000; i++) {
- status = ETH_STATUS(dev);
- /*printf ("Issue: status 0x%4x.\n", status); */
- if (!(status & CmdInProgress))
- return 1;
- }
-
- /* OK, that didn't work. Do it the slow way. One second */
- for (i = 0; i < 100000; i++) {
- status = ETH_STATUS(dev);
- /*printf ("Issue: status 0x%4x.\n", status); */
- return 1;
- udelay(10);
- }
- PRINTF("Ethernet command: 0x%4x did not complete! Status: 0x%4x\n", command, ETH_STATUS(dev) );
- return 0;
-}
-
-/* Determine network media type and set up 3com accordingly */
-/* I think I'm going to start with something known first like 10baseT */
-
-static int auto_negotiate (struct eth_device *dev)
-{
- int i;
-
- EL3WINDOW (dev, 1);
-
- /* Wait for Auto negotiation to complete */
- for (i = 0; i <= 1000; i++) {
- if (ETH_INW (dev, 2) & 0x04)
- break;
- udelay (100);
-
- if (i == 1000) {
- PRINTF ("Error: Auto negotiation failed\n");
- return 0;
- }
- }
-
-
- return 1;
-}
-
-void eth_interrupt (struct eth_device *dev)
-{
- u16 status = ETH_STATUS (dev);
-
- printf ("eth0: status = 0x%04x\n", status);
-
- if (!(status & IntLatch))
- return;
-
- if (status & (1 << 6)) {
- ETH_CMD (dev, AckIntr | (1 << 6));
- printf ("Acknowledged Interrupt command\n");
- }
-
- if (status & DownComplete) {
- ETH_CMD (dev, AckIntr | DownComplete);
- printf ("Acknowledged DownComplete\n");
- }
-
- if (status & UpComplete) {
- ETH_CMD (dev, AckIntr | UpComplete);
- printf ("Acknowledged UpComplete\n");
- }
-
- ETH_CMD (dev, AckIntr | IntLatch);
- printf ("Acknowledged IntLatch\n");
-}
-
-int eth_3com_initialize (bd_t * bis)
-{
- u32 eth_iobase = 0, status;
- int card_number = 0, ret;
- struct eth_device *dev;
- pci_dev_t devno;
- char *s;
-
- s = getenv ("3com_base");
-
- /* Find ethernet controller on the PCI bus */
-
- if ((devno =
- pci_find_device (PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3C905C,
- 0)) < 0) {
- PRINTF ("Error: Cannot find the ethernet device on the PCI bus\n");
- goto Done;
- }
-
- if (s) {
- unsigned long base = atoi (s);
-
- pci_write_config_dword (devno, PCI_BASE_ADDRESS_0,
- base | 0x01);
- }
-
- ret = pci_read_config_dword (devno, PCI_BASE_ADDRESS_0, &eth_iobase);
- eth_iobase &= ~0xf;
-
- PRINTF ("eth: 3Com Found at Address: 0x%x\n", eth_iobase);
-
- pci_write_config_dword (devno, PCI_COMMAND,
- PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
- PCI_COMMAND_MASTER);
-
- /* Check if I/O accesses and Bus Mastering are enabled */
-
- ret = pci_read_config_dword (devno, PCI_COMMAND, &status);
-
- if (!(status & PCI_COMMAND_IO)) {
- printf ("Error: Cannot enable IO access.\n");
- goto Done;
- }
-
- if (!(status & PCI_COMMAND_MEMORY)) {
- printf ("Error: Cannot enable MEMORY access.\n");
- goto Done;
- }
-
- if (!(status & PCI_COMMAND_MASTER)) {
- printf ("Error: Cannot enable Bus Mastering.\n");
- goto Done;
- }
-
- dev = (struct eth_device *) malloc (sizeof (*dev)); /*struct eth_device)); */
-
- sprintf (dev->name, "3Com 3c920c#%d", card_number);
- dev->iobase = eth_iobase;
- dev->priv = (void *) devno;
- dev->init = eth_3com_init;
- dev->halt = eth_3com_halt;
- dev->send = eth_3com_send;
- dev->recv = eth_3com_recv;
-
- eth_register (dev);
-
-/* { */
-/* char interrupt; */
-/* devno = pci_find_device(PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3C905C, 0); */
-/* pci_read_config_byte(devno, PCI_INTERRUPT_LINE, &interrupt); */
-
-/* printf("Installing eth0 interrupt handler to %d\n", interrupt); */
-/* irq_install_handler(interrupt, eth_interrupt, dev); */
-/* } */
-
- card_number++;
-
- /* Set the latency timer for value */
- s = getenv ("3com_latency");
- if (s) {
- ret = pci_write_config_byte (devno, PCI_LATENCY_TIMER,
- (unsigned char) atoi (s));
- } else
- ret = pci_write_config_byte (devno, PCI_LATENCY_TIMER, 0x0a);
-
- read_hw_addr (dev, bis); /* get the MAC address from Window 2 */
-
- /* Reset the ethernet controller */
-
- PRINTF ("Issuing reset command....\n");
- if (!issue_and_wait (dev, TotalReset)) {
- printf ("Error: Cannot reset ethernet controller.\n");
- goto Done;
- } else
- PRINTF ("Ethernet controller reset.\n");
-
- /* allocate memory for rx and tx rings */
-
- if (!(rx_ring = memalign (sizeof (struct rx_desc_3com) * NUM_RX_DESC, 16))) {
- PRINTF ("Cannot allocate memory for RX_RING.....\n");
- goto Done;
- }
-
- if (!(tx_ring = memalign (sizeof (struct tx_desc_3com) * NUM_TX_DESC, 16))) {
- PRINTF ("Cannot allocate memory for TX_RING.....\n");
- goto Done;
- }
-
-Done:
- return status;
-}
-
-
-static int eth_3com_init (struct eth_device *dev, bd_t * bis)
-{
- int i, status = 0;
- int tx_cur, loop;
- u16 status_enable, intr_enable;
- struct descriptor *ias_cmd;
-
- /* Determine what type of network the machine is connected to */
- /* presently drops the connect to 10Mbps */
-
- if (!auto_negotiate (dev)) {
- printf ("Error: Cannot determine network media.\n");
- goto Done;
- }
-
- issue_and_wait (dev, TxReset);
- issue_and_wait (dev, RxReset | 0x04);
-
- /* Switch to register set 7 for normal use. */
- EL3WINDOW (dev, 7);
-
- /* Initialize Rx and Tx rings */
-
- init_rx_ring (dev);
- purge_tx_ring (dev);
-
- ETH_CMD (dev, SetRxFilter | RxStation | RxBroadcast | RxProm);
-
- issue_and_wait (dev, SetTxStart | 0x07ff);
-
- /* Below sets which indication bits to be seen. */
-
- status_enable =
- SetStatusEnb | HostError | DownComplete | UpComplete | (1 <<
- 6);
- ETH_CMD (dev, status_enable);
-
- /* Below sets no bits are to cause an interrupt since this is just polling */
-
- intr_enable = SetIntrEnb;
-/* intr_enable = SetIntrEnb | (1<<9) | (1<<10) | (1<<6); */
- ETH_CMD (dev, intr_enable);
- ETH_OUTB (dev, 127, UpPoll);
-
- /* Ack all pending events, and set active indicator mask */
-
- ETH_CMD (dev, AckIntr | IntLatch | TxAvailable | RxEarly | IntReq);
- ETH_CMD (dev, intr_enable);
-
- /* Tell the adapter where the RX ring is located */
-
- issue_and_wait (dev, UpStall); /* Stall and set the UplistPtr */
- ETH_OUTL (dev, (u32) & rx_ring[rx_next], UpListPtr);
- ETH_CMD (dev, RxEnable); /* Enable the receiver. */
- issue_and_wait (dev, UpUnstall);
-
- /* Send the Individual Address Setup frame */
-
- tx_cur = tx_next;
- tx_next = ((tx_next + 1) % NUM_TX_DESC);
-
- ias_cmd = (struct descriptor *) &tx_ring[tx_cur];
- ias_cmd->status = cpu_to_le32 (1 << 31); /* set DnIndicate bit. */
- ias_cmd->next = 0;
- ias_cmd->addr = cpu_to_le32 ((u32) dev->enetaddr);
- ias_cmd->length = cpu_to_le32 (6 | LAST_FRAG);
-
- /* Tell the adapter where the TX ring is located */
-
- ETH_CMD (dev, TxEnable); /* Enable transmitter. */
- issue_and_wait (dev, DownStall); /* Stall and set the DownListPtr. */
- ETH_OUTL (dev, (u32) & tx_ring[tx_cur], DownListPtr);
- issue_and_wait (dev, DownUnstall);
- for (i = 0; !(ETH_STATUS (dev) & DownComplete); i++) {
- if (i >= TOUT_LOOP) {
- PRINTF ("TX Ring status (Init): 0x%4x\n",
- le32_to_cpu (tx_ring[tx_cur].status));
- PRINTF ("ETH_STATUS: 0x%x\n", ETH_STATUS (dev));
- goto Done;
- }
- }
- if (ETH_STATUS (dev) & DownComplete) { /* If DownLoad Complete ACK the bit */
- ETH_CMD (dev, AckIntr | DownComplete); /* acknowledge the indication bit */
- issue_and_wait (dev, DownStall); /* stall and clear DownListPtr */
- ETH_OUTL (dev, 0, DownListPtr);
- issue_and_wait (dev, DownUnstall);
- }
- status = 1;
-Done:
- return status;
-}
-
-int eth_3com_send (struct eth_device *dev, volatile void *packet, int length)
-{
- int i, status = 0;
- int tx_cur;
-
- if (length <= 0) {
- PRINTF ("eth: bad packet size: %d\n", length);
- goto Done;
- }
-
- tx_cur = tx_next;
- tx_next = (tx_next + 1) % NUM_TX_DESC;
-
- tx_ring[tx_cur].status = cpu_to_le32 (1 << 31); /* set DnIndicate bit */
- tx_ring[tx_cur].next = 0;
- tx_ring[tx_cur].addr = cpu_to_le32 (((u32) packet));
- tx_ring[tx_cur].length = cpu_to_le32 (length | LAST_FRAG);
-
- /* Send the packet */
-
- issue_and_wait (dev, DownStall); /* stall and set the DownListPtr */
- ETH_OUTL (dev, (u32) & tx_ring[tx_cur], DownListPtr);
- issue_and_wait (dev, DownUnstall);
-
- for (i = 0; !(ETH_STATUS (dev) & DownComplete); i++) {
- if (i >= TOUT_LOOP) {
- PRINTF ("TX Ring status (send): 0x%4x\n",
- le32_to_cpu (tx_ring[tx_cur].status));
- goto Done;
- }
- }
- if (ETH_STATUS (dev) & DownComplete) { /* If DownLoad Complete ACK the bit */
- ETH_CMD (dev, AckIntr | DownComplete); /* acknowledge the indication bit */
- issue_and_wait (dev, DownStall); /* stall and clear DownListPtr */
- ETH_OUTL (dev, 0, DownListPtr);
- issue_and_wait (dev, DownUnstall);
- }
- status = 1;
-Done:
- return status;
-}
-
-void PrintPacket (uchar * packet, int length)
-{
- int loop;
- uchar *ptr;
-
- printf ("Printing packet of length %x.\n\n", length);
- ptr = packet;
- for (loop = 1; loop <= length; loop++) {
- printf ("%2x ", *ptr++);
- if ((loop % 40) == 0)
- printf ("\n");
- }
-}
-
-int eth_3com_recv (struct eth_device *dev)
-{
- u16 stat = 0;
- u32 status;
- int rx_prev, length = 0;
-
- while (!(ETH_STATUS (dev) & UpComplete)) /* wait on receipt of packet */
- ;
-
- status = le32_to_cpu (rx_ring[rx_next].status); /* packet status */
-
- while (status & (1 << 15)) {
- /* A packet has been received */
-
- if (status & (1 << 15)) {
- /* A valid frame received */
-
- length = le32_to_cpu (rx_ring[rx_next].status) & 0x1fff; /* length is in bits 0 - 12 */
-
- /* Pass the packet up to the protocol layers */
-
- NetReceive ((uchar *)
- le32_to_cpu (rx_ring[rx_next].addr),
- length);
- rx_ring[rx_next].status = 0; /* clear the status word */
- ETH_CMD (dev, AckIntr | UpComplete);
- issue_and_wait (dev, UpUnstall);
- } else if (stat & HostError) {
- /* There was an error */
-
- printf ("Rx error status: 0x%4x\n", stat);
- init_rx_ring (dev);
- goto Done;
- }
-
- rx_prev = rx_next;
- rx_next = (rx_next + 1) % NUM_RX_DESC;
- stat = ETH_STATUS (dev); /* register status */
- status = le32_to_cpu (rx_ring[rx_next].status); /* packet status */
- }
-Done:
- return length;
-}
-
-void eth_3com_halt (struct eth_device *dev)
-{
- if (!(dev->iobase)) {
- goto Done;
- }
-
- issue_and_wait (dev, DownStall); /* shut down transmit and receive */
- issue_and_wait (dev, UpStall);
- issue_and_wait (dev, RxDisable);
- issue_and_wait (dev, TxDisable);
-
-/* free(tx_ring); /###* release memory allocated to the DPD and UPD rings */
-/* free(rx_ring); */
-
-Done:
- return;
-}
-
-static void init_rx_ring (struct eth_device *dev)
-{
- int i;
-
- PRINTF ("Initializing rx_ring. rx_buffer = %p\n", rx_buffer);
- issue_and_wait (dev, UpStall);
-
- for (i = 0; i < NUM_RX_DESC; i++) {
- rx_ring[i].next =
- cpu_to_le32 (((u32) &
- rx_ring[(i + 1) % NUM_RX_DESC]));
- rx_ring[i].status = 0;
- rx_ring[i].addr = cpu_to_le32 (((u32) & rx_buffer[i][0]));
- rx_ring[i].length = cpu_to_le32 (PKTSIZE_ALIGN | LAST_FRAG);
- }
- rx_next = 0;
-}
-
-static void purge_tx_ring (struct eth_device *dev)
-{
- int i;
-
- PRINTF ("Purging tx_ring.\n");
-
- tx_next = 0;
-
- for (i = 0; i < NUM_TX_DESC; i++) {
- tx_ring[i].next = 0;
- tx_ring[i].status = 0;
- tx_ring[i].addr = 0;
- tx_ring[i].length = 0;
- }
-}
-
-static void read_hw_addr (struct eth_device *dev, bd_t * bis)
-{
- u8 hw_addr[ETH_ALEN];
- unsigned int eeprom[0x40];
- unsigned int checksum = 0;
- int i, j, timer;
-
- /* First, try the env ... if that works, we're all done! */
- if (eth_getenv_enetaddr("ethaddr", hw_addr))
- goto Done;
-
- /* Read the station address from the EEPROM. */
-
- EL3WINDOW (dev, 0);
- for (i = 0; i < 0x40; i++) {
- ETH_OUTW (dev, EEPROM_Read + i, Wn0EepromCmd);
- /* Pause for at least 162 us. for the read to take place. */
- for (timer = 10; timer >= 0; timer--) {
- udelay (162);
- if ((ETH_INW (dev, Wn0EepromCmd) & 0x8000) == 0)
- break;
- }
- eeprom[i] = ETH_INW (dev, Wn0EepromData);
- }
-
- /* Checksum calculation. I'm not sure about this part and there seems to be a bug on the 3com side of things */
-
- for (i = 0; i < 0x21; i++)
- checksum ^= eeprom[i];
- checksum = (checksum ^ (checksum >> 8)) & 0xff;
-
- if (checksum != 0xbb)
- printf (" *** INVALID EEPROM CHECKSUM %4.4x *** \n",
- checksum);
-
- for (i = 0, j = 0; i < 3; i++) {
- hw_addr[j++] = (u8) ((eeprom[i + 10] >> 8) & 0xff);
- hw_addr[j++] = (u8) (eeprom[i + 10] & 0xff);
- }
-
- /* MAC Address is in window 2, write value from EEPROM to window 2 */
-
- EL3WINDOW (dev, 2);
- for (i = 0; i < 6; i++)
- ETH_OUTB (dev, hw_addr[i], i);
-
- for (j = 0; j < ETH_ALEN; j += 2) {
- hw_addr[j] = (u8) (ETH_INW (dev, j) & 0xff);
- hw_addr[j + 1] = (u8) ((ETH_INW (dev, j) >> 8) & 0xff);
- }
-
- /* Save the result in the environment */
- eth_setenv_enetaddr("ethaddr", hw_addr);
-
-Done:
- memcpy(dev->enetaddr, hw_addr, 6);
- return;
-}