summaryrefslogtreecommitdiff
path: root/board/aries
diff options
context:
space:
mode:
Diffstat (limited to 'board/aries')
-rw-r--r--board/aries/m28evk/Kconfig15
-rw-r--r--board/aries/m28evk/MAINTAINERS6
-rw-r--r--board/aries/m28evk/Makefile12
-rw-r--r--board/aries/m28evk/README13
-rw-r--r--board/aries/m28evk/m28evk.c173
-rw-r--r--board/aries/m28evk/spl_boot.c206
-rw-r--r--board/aries/m53evk/Kconfig15
-rw-r--r--board/aries/m53evk/MAINTAINERS6
-rw-r--r--board/aries/m53evk/Makefile8
-rw-r--r--board/aries/m53evk/imximage.cfg92
-rw-r--r--board/aries/m53evk/m53evk.c404
-rw-r--r--board/aries/ma5d4evk/Kconfig12
-rw-r--r--board/aries/ma5d4evk/MAINTAINERS6
-rw-r--r--board/aries/ma5d4evk/Makefile7
-rw-r--r--board/aries/ma5d4evk/ma5d4evk.c456
-rw-r--r--board/aries/mcvevk/MAINTAINERS5
-rw-r--r--board/aries/mcvevk/Makefile9
-rw-r--r--board/aries/mcvevk/qts/iocsr_config.h660
-rw-r--r--board/aries/mcvevk/qts/pinmux_config.h219
-rw-r--r--board/aries/mcvevk/qts/pll_config.h85
-rw-r--r--board/aries/mcvevk/qts/sdram_config.h344
-rw-r--r--board/aries/mcvevk/socfpga.c6
22 files changed, 2759 insertions, 0 deletions
diff --git a/board/aries/m28evk/Kconfig b/board/aries/m28evk/Kconfig
new file mode 100644
index 0000000..ab5577c
--- /dev/null
+++ b/board/aries/m28evk/Kconfig
@@ -0,0 +1,15 @@
+if TARGET_M28EVK
+
+config SYS_BOARD
+ default "m28evk"
+
+config SYS_VENDOR
+ default "aries"
+
+config SYS_SOC
+ default "mxs"
+
+config SYS_CONFIG_NAME
+ default "m28evk"
+
+endif
diff --git a/board/aries/m28evk/MAINTAINERS b/board/aries/m28evk/MAINTAINERS
new file mode 100644
index 0000000..aad6313
--- /dev/null
+++ b/board/aries/m28evk/MAINTAINERS
@@ -0,0 +1,6 @@
+M28EVK BOARD
+#M: Marek Vasut <marek.vasut@gmail.com>
+S: Orphan (since 2017-07)
+F: board/aries/m28evk/
+F: include/configs/m28evk.h
+F: configs/m28evk_defconfig
diff --git a/board/aries/m28evk/Makefile b/board/aries/m28evk/Makefile
new file mode 100644
index 0000000..5e890b1
--- /dev/null
+++ b/board/aries/m28evk/Makefile
@@ -0,0 +1,12 @@
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+ifndef CONFIG_SPL_BUILD
+obj-y := m28evk.o
+else
+obj-y := spl_boot.o
+endif
diff --git a/board/aries/m28evk/README b/board/aries/m28evk/README
new file mode 100644
index 0000000..9f0d995
--- /dev/null
+++ b/board/aries/m28evk/README
@@ -0,0 +1,13 @@
+Aries M28EVK
+============
+
+Files of the M28/M28EVK port
+----------------------------
+
+arch/arm/cpu/arm926ejs/mxs/ - The CPU support code for the Freescale i.MX28
+arch/arm/include/asm/arch-mxs/ - Header files for the Freescale i.MX28
+board/aries/m28evk/ - M28EVK board specific files
+include/configs/m28evk.h - M28EVK configuration file
+
+Follow the instructions from doc/README.mxs to generate a bootable SD card or to
+boot from NAND flash.
diff --git a/board/aries/m28evk/m28evk.c b/board/aries/m28evk/m28evk.c
new file mode 100644
index 0000000..c990ea9
--- /dev/null
+++ b/board/aries/m28evk/m28evk.c
@@ -0,0 +1,173 @@
+/*
+ * Aries M28 module
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/iomux-mx28.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
+#include <linux/mii.h>
+#include <miiphy.h>
+#include <netdev.h>
+#include <errno.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Functions
+ */
+int board_early_init_f(void)
+{
+ /* IO0 clock at 480MHz */
+ mxs_set_ioclk(MXC_IOCLK0, 480000);
+ /* IO1 clock at 480MHz */
+ mxs_set_ioclk(MXC_IOCLK1, 480000);
+
+ /* SSP0 clock at 96MHz */
+ mxs_set_sspclk(MXC_SSPCLK0, 96000, 0);
+ /* SSP2 clock at 160MHz */
+ mxs_set_sspclk(MXC_SSPCLK2, 160000, 0);
+
+#ifdef CONFIG_CMD_USB
+ mxs_iomux_setup_pad(MX28_PAD_SSP2_SS1__USB1_OVERCURRENT);
+ mxs_iomux_setup_pad(MX28_PAD_AUART3_TX__GPIO_3_13 |
+ MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP);
+ gpio_direction_output(MX28_PAD_AUART3_TX__GPIO_3_13, 0);
+
+ mxs_iomux_setup_pad(MX28_PAD_AUART3_RX__GPIO_3_12 |
+ MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP);
+ gpio_direction_output(MX28_PAD_AUART3_RX__GPIO_3_12, 0);
+#endif
+
+ return 0;
+}
+
+int board_init(void)
+{
+ /* Adress of boot parameters */
+ gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
+
+ return 0;
+}
+
+int dram_init(void)
+{
+ return mxs_dram_init();
+}
+
+#ifdef CONFIG_CMD_MMC
+static int m28_mmc_wp(int id)
+{
+ if (id != 0) {
+ printf("MXS MMC: Invalid card selected (card id = %d)\n", id);
+ return 1;
+ }
+
+ return gpio_get_value(MX28_PAD_AUART2_CTS__GPIO_3_10);
+}
+
+int board_mmc_init(bd_t *bis)
+{
+ /* Configure WP as input. */
+ gpio_direction_input(MX28_PAD_AUART2_CTS__GPIO_3_10);
+ /* Turn on the power to the card. */
+ gpio_direction_output(MX28_PAD_PWM3__GPIO_3_28, 0);
+
+ return mxsmmc_initialize(bis, 0, m28_mmc_wp, NULL);
+}
+#endif
+
+#ifdef CONFIG_CMD_NET
+
+#define MII_OPMODE_STRAP_OVERRIDE 0x16
+#define MII_PHY_CTRL1 0x1e
+#define MII_PHY_CTRL2 0x1f
+
+int fecmxc_mii_postcall(int phy)
+{
+#if defined(CONFIG_ARIES_M28_V11) || defined(CONFIG_ARIES_M28_V10)
+ /* KZ8031 PHY on old boards. */
+ const uint32_t freq = 0x0080;
+#else
+ /* KZ8021 PHY on new boards. */
+ const uint32_t freq = 0x0000;
+#endif
+
+ miiphy_write("FEC1", phy, MII_BMCR, 0x9000);
+ miiphy_write("FEC1", phy, MII_OPMODE_STRAP_OVERRIDE, 0x0202);
+ if (phy == 3)
+ miiphy_write("FEC1", 3, MII_PHY_CTRL2, 0x8100 | freq);
+ return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+ struct mxs_clkctrl_regs *clkctrl_regs =
+ (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;
+ struct eth_device *dev;
+ int ret;
+
+ ret = cpu_eth_init(bis);
+ if (ret)
+ return ret;
+
+ clrsetbits_le32(&clkctrl_regs->hw_clkctrl_enet,
+ CLKCTRL_ENET_TIME_SEL_MASK | CLKCTRL_ENET_CLK_OUT_EN,
+ CLKCTRL_ENET_TIME_SEL_RMII_CLK);
+
+#if !defined(CONFIG_ARIES_M28_V11) && !defined(CONFIG_ARIES_M28_V10)
+ /* Reset the new PHY */
+ gpio_direction_output(MX28_PAD_AUART2_RTS__GPIO_3_11, 0);
+ udelay(10000);
+ gpio_set_value(MX28_PAD_AUART2_RTS__GPIO_3_11, 1);
+ udelay(10000);
+#endif
+
+ ret = fecmxc_initialize_multi(bis, 0, 0, MXS_ENET0_BASE);
+ if (ret) {
+ printf("FEC MXS: Unable to init FEC0\n");
+ return ret;
+ }
+
+ ret = fecmxc_initialize_multi(bis, 1, 3, MXS_ENET1_BASE);
+ if (ret) {
+ printf("FEC MXS: Unable to init FEC1\n");
+ return ret;
+ }
+
+ dev = eth_get_dev_by_name("FEC0");
+ if (!dev) {
+ printf("FEC MXS: Unable to get FEC0 device entry\n");
+ return -EINVAL;
+ }
+
+ ret = fecmxc_register_mii_postcall(dev, fecmxc_mii_postcall);
+ if (ret) {
+ printf("FEC MXS: Unable to register FEC0 mii postcall\n");
+ return ret;
+ }
+
+ dev = eth_get_dev_by_name("FEC1");
+ if (!dev) {
+ printf("FEC MXS: Unable to get FEC1 device entry\n");
+ return -EINVAL;
+ }
+
+ ret = fecmxc_register_mii_postcall(dev, fecmxc_mii_postcall);
+ if (ret) {
+ printf("FEC MXS: Unable to register FEC1 mii postcall\n");
+ return ret;
+ }
+
+ return ret;
+}
+
+#endif
diff --git a/board/aries/m28evk/spl_boot.c b/board/aries/m28evk/spl_boot.c
new file mode 100644
index 0000000..e27a74e
--- /dev/null
+++ b/board/aries/m28evk/spl_boot.c
@@ -0,0 +1,206 @@
+/*
+ * ARIES M28 Boot setup
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <config.h>
+#include <asm/io.h>
+#include <asm/arch/iomux-mx28.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/sys_proto.h>
+
+#define MUX_CONFIG_LED (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL)
+#define MUX_CONFIG_LCD (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL)
+#define MUX_CONFIG_TSC (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP)
+#define MUX_CONFIG_SSP0 (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_PULLUP)
+#define MUX_CONFIG_SSP2 (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_PULLUP)
+#define MUX_CONFIG_GPMI (MXS_PAD_1V8 | MXS_PAD_4MA | MXS_PAD_NOPULL)
+#define MUX_CONFIG_ENET (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_PULLUP)
+#define MUX_CONFIG_EMI (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL)
+
+const iomux_cfg_t iomux_setup[] = {
+ /* LED */
+ MX28_PAD_ENET0_RXD3__GPIO_4_10 | MUX_CONFIG_LED,
+
+ /* framebuffer */
+ MX28_PAD_LCD_D00__LCD_D0 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D01__LCD_D1 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D02__LCD_D2 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D03__LCD_D3 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D04__LCD_D4 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D05__LCD_D5 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D06__LCD_D6 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D07__LCD_D7 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D08__LCD_D8 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D09__LCD_D9 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D10__LCD_D10 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D11__LCD_D11 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D12__LCD_D12 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D13__LCD_D13 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D14__LCD_D14 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D15__LCD_D15 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D16__LCD_D16 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D17__LCD_D17 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D18__LCD_D18 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D19__LCD_D19 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D20__LCD_D20 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D21__LCD_D21 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D22__LCD_D22 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D23__LCD_D23 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_DOTCLK__LCD_DOTCLK | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_ENABLE__LCD_ENABLE | MUX_CONFIG_LCD,
+
+ /* UART1 */
+#ifdef CONFIG_ARIES_M28_V10
+ MX28_PAD_AUART0_CTS__DUART_RX,
+ MX28_PAD_AUART0_RTS__DUART_TX,
+#else
+ MX28_PAD_PWM0__DUART_RX,
+ MX28_PAD_PWM1__DUART_TX,
+#endif
+ MX28_PAD_AUART0_TX__DUART_RTS,
+ MX28_PAD_AUART0_RX__DUART_CTS,
+
+ /* UART2 */
+ MX28_PAD_AUART1_RX__AUART1_RX,
+ MX28_PAD_AUART1_TX__AUART1_TX,
+ MX28_PAD_AUART1_RTS__AUART1_RTS,
+ MX28_PAD_AUART1_CTS__AUART1_CTS,
+
+ /* CAN */
+ MX28_PAD_GPMI_RDY2__CAN0_TX,
+ MX28_PAD_GPMI_RDY3__CAN0_RX,
+
+ /* TSC2007 */
+ MX28_PAD_SAIF0_MCLK__GPIO_3_20 | MUX_CONFIG_TSC,
+
+ /* MMC0 */
+ MX28_PAD_SSP0_DATA0__SSP0_D0 | MUX_CONFIG_SSP0,
+ MX28_PAD_SSP0_DATA1__SSP0_D1 | MUX_CONFIG_SSP0,
+ MX28_PAD_SSP0_DATA2__SSP0_D2 | MUX_CONFIG_SSP0,
+ MX28_PAD_SSP0_DATA3__SSP0_D3 | MUX_CONFIG_SSP0,
+ MX28_PAD_SSP0_DATA4__SSP0_D4 | MUX_CONFIG_SSP0,
+ MX28_PAD_SSP0_DATA5__SSP0_D5 | MUX_CONFIG_SSP0,
+ MX28_PAD_SSP0_DATA6__SSP0_D6 | MUX_CONFIG_SSP0,
+ MX28_PAD_SSP0_DATA7__SSP0_D7 | MUX_CONFIG_SSP0,
+ MX28_PAD_SSP0_CMD__SSP0_CMD | MUX_CONFIG_SSP0,
+ MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT |
+ (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL),
+ MX28_PAD_SSP0_SCK__SSP0_SCK |
+ (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL),
+ MX28_PAD_PWM3__GPIO_3_28 | MUX_CONFIG_SSP0 |
+ (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL), /* Power */
+ MX28_PAD_AUART2_CTS__GPIO_3_10, /* WP */
+
+ /* GPMI NAND */
+ MX28_PAD_GPMI_D00__GPMI_D0 | MUX_CONFIG_GPMI,
+ MX28_PAD_GPMI_D01__GPMI_D1 | MUX_CONFIG_GPMI,
+ MX28_PAD_GPMI_D02__GPMI_D2 | MUX_CONFIG_GPMI,
+ MX28_PAD_GPMI_D03__GPMI_D3 | MUX_CONFIG_GPMI,
+ MX28_PAD_GPMI_D04__GPMI_D4 | MUX_CONFIG_GPMI,
+ MX28_PAD_GPMI_D05__GPMI_D5 | MUX_CONFIG_GPMI,
+ MX28_PAD_GPMI_D06__GPMI_D6 | MUX_CONFIG_GPMI,
+ MX28_PAD_GPMI_D07__GPMI_D7 | MUX_CONFIG_GPMI,
+ MX28_PAD_GPMI_CE0N__GPMI_CE0N | MUX_CONFIG_GPMI,
+ MX28_PAD_GPMI_RDY0__GPMI_READY0 | MUX_CONFIG_GPMI,
+ MX28_PAD_GPMI_RDN__GPMI_RDN |
+ (MXS_PAD_1V8 | MXS_PAD_8MA | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_WRN__GPMI_WRN | MUX_CONFIG_GPMI,
+ MX28_PAD_GPMI_ALE__GPMI_ALE | MUX_CONFIG_GPMI,
+ MX28_PAD_GPMI_CLE__GPMI_CLE | MUX_CONFIG_GPMI,
+ MX28_PAD_GPMI_RESETN__GPMI_RESETN | MUX_CONFIG_GPMI,
+
+ /* FEC Ethernet */
+ MX28_PAD_ENET0_MDC__ENET0_MDC | MUX_CONFIG_ENET,
+ MX28_PAD_ENET0_MDIO__ENET0_MDIO | MUX_CONFIG_ENET,
+ MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MUX_CONFIG_ENET,
+ MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MUX_CONFIG_ENET,
+ MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MUX_CONFIG_ENET,
+ MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MUX_CONFIG_ENET,
+ MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MUX_CONFIG_ENET,
+ MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MUX_CONFIG_ENET,
+ MX28_PAD_ENET_CLK__CLKCTRL_ENET | MUX_CONFIG_ENET,
+
+ MX28_PAD_ENET0_COL__ENET1_TX_EN | MUX_CONFIG_ENET,
+ MX28_PAD_ENET0_CRS__ENET1_RX_EN | MUX_CONFIG_ENET,
+ MX28_PAD_ENET0_RXD2__ENET1_RXD0 | MUX_CONFIG_ENET,
+ MX28_PAD_ENET0_RXD3__ENET1_RXD1 | MUX_CONFIG_ENET,
+ MX28_PAD_ENET0_TXD2__ENET1_TXD0 | MUX_CONFIG_ENET,
+ MX28_PAD_ENET0_TXD3__ENET1_TXD1 | MUX_CONFIG_ENET,
+#if !defined(CONFIG_ARIES_M28_V11) && !defined(CONFIG_ARIES_M28_V10)
+ MX28_PAD_AUART2_RTS__GPIO_3_11, /* PHY reset */
+#endif
+
+ /* I2C */
+ MX28_PAD_I2C0_SCL__I2C0_SCL,
+ MX28_PAD_I2C0_SDA__I2C0_SDA,
+
+ /* EMI */
+ MX28_PAD_EMI_D00__EMI_DATA0 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_D01__EMI_DATA1 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_D02__EMI_DATA2 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_D03__EMI_DATA3 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_D04__EMI_DATA4 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_D05__EMI_DATA5 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_D06__EMI_DATA6 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_D07__EMI_DATA7 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_D08__EMI_DATA8 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_D09__EMI_DATA9 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_D10__EMI_DATA10 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_D11__EMI_DATA11 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_D12__EMI_DATA12 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_D13__EMI_DATA13 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_D14__EMI_DATA14 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_D15__EMI_DATA15 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_ODT0__EMI_ODT0 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_DQM0__EMI_DQM0 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_ODT1__EMI_ODT1 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_DQM1__EMI_DQM1 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_DDR_OPEN_FB__EMI_DDR_OPEN_FEEDBACK | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_CLK__EMI_CLK | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_DQS0__EMI_DQS0 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_DQS1__EMI_DQS1 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_DDR_OPEN__EMI_DDR_OPEN | MUX_CONFIG_EMI,
+
+ MX28_PAD_EMI_A00__EMI_ADDR0 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_A01__EMI_ADDR1 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_A02__EMI_ADDR2 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_A03__EMI_ADDR3 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_A04__EMI_ADDR4 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_A05__EMI_ADDR5 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_A06__EMI_ADDR6 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_A07__EMI_ADDR7 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_A08__EMI_ADDR8 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_A09__EMI_ADDR9 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_A10__EMI_ADDR10 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_A11__EMI_ADDR11 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_A12__EMI_ADDR12 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_A13__EMI_ADDR13 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_A14__EMI_ADDR14 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_BA0__EMI_BA0 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_BA1__EMI_BA1 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_BA2__EMI_BA2 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_CASN__EMI_CASN | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_RASN__EMI_RASN | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_WEN__EMI_WEN | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_CE0N__EMI_CE0N | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_CE1N__EMI_CE1N | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_CKE__EMI_CKE | MUX_CONFIG_EMI,
+
+ /* SPI2 (for flash) */
+ MX28_PAD_SSP2_SCK__SSP2_SCK | MUX_CONFIG_SSP2,
+ MX28_PAD_SSP2_MOSI__SSP2_CMD | MUX_CONFIG_SSP2,
+ MX28_PAD_SSP2_MISO__SSP2_D0 | MUX_CONFIG_SSP2,
+ MX28_PAD_SSP2_SS0__SSP2_D3 |
+ (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP),
+};
+
+void board_init_ll(const uint32_t arg, const uint32_t *resptr)
+{
+ mxs_common_spl_init(arg, resptr, iomux_setup, ARRAY_SIZE(iomux_setup));
+}
diff --git a/board/aries/m53evk/Kconfig b/board/aries/m53evk/Kconfig
new file mode 100644
index 0000000..2d49b40
--- /dev/null
+++ b/board/aries/m53evk/Kconfig
@@ -0,0 +1,15 @@
+if TARGET_M53EVK
+
+config SYS_BOARD
+ default "m53evk"
+
+config SYS_VENDOR
+ default "aries"
+
+config SYS_SOC
+ default "mx5"
+
+config SYS_CONFIG_NAME
+ default "m53evk"
+
+endif
diff --git a/board/aries/m53evk/MAINTAINERS b/board/aries/m53evk/MAINTAINERS
new file mode 100644
index 0000000..73a68cf
--- /dev/null
+++ b/board/aries/m53evk/MAINTAINERS
@@ -0,0 +1,6 @@
+M53EVK BOARD
+#M: Marek Vasut <marek.vasut@gmail.com>
+S: Orphan (since 2017-07)
+F: board/aries/m53evk/
+F: include/configs/m53evk.h
+F: configs/m53evk_defconfig
diff --git a/board/aries/m53evk/Makefile b/board/aries/m53evk/Makefile
new file mode 100644
index 0000000..daa0fe4
--- /dev/null
+++ b/board/aries/m53evk/Makefile
@@ -0,0 +1,8 @@
+#
+# Aries M53EVK
+# Copyright (C) 2012-2013 Marek Vasut <marex@denx.de>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y := m53evk.o
diff --git a/board/aries/m53evk/imximage.cfg b/board/aries/m53evk/imximage.cfg
new file mode 100644
index 0000000..e4f3ce5
--- /dev/null
+++ b/board/aries/m53evk/imximage.cfg
@@ -0,0 +1,92 @@
+/*
+ * Aries M53 DRAM init values
+ * Copyright (C) 2012-2013 Marek Vasut <marex@denx.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ * Refer doc/README.imximage for more details about how-to configure
+ * and create imximage boot image
+ *
+ * The syntax is taken as close as possible with the kwbimage
+ */
+#include <asm/mach-imx/imximage.cfg>
+
+/* image version */
+IMAGE_VERSION 2
+
+
+/* Boot Offset 0x400, valid for both SD and NAND boot. */
+BOOT_OFFSET FLASH_OFFSET_STANDARD
+
+/*
+ * Device Configuration Data (DCD)
+ *
+ * Each entry must have the format:
+ * Addr-type Address Value
+ *
+ * where:
+ * Addr-type register length (1,2 or 4 bytes)
+ * Address absolute address of the register
+ * value value to be stored in the register
+ */
+DATA 4 0x53fa86f4 0x00000000 /* GRP_DDRMODE_CTL */
+DATA 4 0x53fa8714 0x00000000 /* GRP_DDRMODE */
+DATA 4 0x53fa86fc 0x00000000 /* GRP_DDRPKE */
+DATA 4 0x53fa8724 0x04000000 /* GRP_DDR_TYPE */
+
+DATA 4 0x53fa872c 0x00300000 /* GRP_B3DS */
+DATA 4 0x53fa8554 0x00300000 /* DRAM_DQM3 */
+DATA 4 0x53fa8558 0x00300040 /* DRAM_SDQS3 */
+
+DATA 4 0x53fa8728 0x00300000 /* GRP_B2DS */
+DATA 4 0x53fa8560 0x00300000 /* DRAM_DQM2 */
+DATA 4 0x53fa8568 0x00300040 /* DRAM_SDQS2 */
+
+DATA 4 0x53fa871c 0x00300000 /* GRP_B1DS */
+DATA 4 0x53fa8594 0x00300000 /* DRAM_DQM1 */
+DATA 4 0x53fa8590 0x00300040 /* DRAM_SDQS1 */
+
+DATA 4 0x53fa8718 0x00300000 /* GRP_B0DS */
+DATA 4 0x53fa8584 0x00300000 /* DRAM_DQM0 */
+DATA 4 0x53fa857c 0x00300040 /* DRAM_SDQS0 */
+
+DATA 4 0x53fa8578 0x00300000 /* DRAM_SDCLK_0 */
+DATA 4 0x53fa8570 0x00300000 /* DRAM_SDCLK_1 */
+
+DATA 4 0x53fa8574 0x00300000 /* DRAM_CAS */
+DATA 4 0x53fa8588 0x00300000 /* DRAM_RAS */
+DATA 4 0x53fa86f0 0x00300000 /* GRP_ADDDS */
+DATA 4 0x53fa8720 0x00300000 /* GRP_CTLDS */
+
+DATA 4 0x53fa8564 0x00300040 /* DRAM_SDODT1 */
+DATA 4 0x53fa8580 0x00300040 /* DRAM_SDODT0 */
+
+/* ESDCTL */
+DATA 4 0x63fd9088 0x32383535
+DATA 4 0x63fd9090 0x40383538
+DATA 4 0x63fd907c 0x0136014d
+DATA 4 0x63fd9080 0x01510141
+
+DATA 4 0x63fd9018 0x00011740
+DATA 4 0x63fd9000 0xc3190000
+DATA 4 0x63fd900c 0x555952e3
+DATA 4 0x63fd9010 0xb68e8b63
+DATA 4 0x63fd9014 0x01ff00db
+DATA 4 0x63fd902c 0x000026d2
+DATA 4 0x63fd9030 0x009f0e21
+DATA 4 0x63fd9008 0x12273030
+DATA 4 0x63fd9004 0x0002002d
+DATA 4 0x63fd901c 0x00008032
+DATA 4 0x63fd901c 0x00008033
+DATA 4 0x63fd901c 0x00028031
+DATA 4 0x63fd901c 0x092080b0
+DATA 4 0x63fd901c 0x04008040
+DATA 4 0x63fd901c 0x0000803a
+DATA 4 0x63fd901c 0x0000803b
+DATA 4 0x63fd901c 0x00028039
+DATA 4 0x63fd901c 0x09208138
+DATA 4 0x63fd901c 0x04008048
+DATA 4 0x63fd9020 0x00001800
+DATA 4 0x63fd9040 0x04b80003
+DATA 4 0x63fd9058 0x00022227
+DATA 4 0x63fd901c 0x00000000
diff --git a/board/aries/m53evk/m53evk.c b/board/aries/m53evk/m53evk.c
new file mode 100644
index 0000000..ece8957
--- /dev/null
+++ b/board/aries/m53evk/m53evk.c
@@ -0,0 +1,404 @@
+/*
+ * Aries M53 module
+ *
+ * Copyright (C) 2012-2013 Marek Vasut <marex@denx.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/iomux-mx53.h>
+#include <asm/mach-imx/mx5_video.h>
+#include <asm/spl.h>
+#include <linux/errno.h>
+#include <netdev.h>
+#include <i2c.h>
+#include <mmc.h>
+#include <spl.h>
+#include <fsl_esdhc.h>
+#include <asm/gpio.h>
+#include <usb/ehci-ci.h>
+#include <linux/fb.h>
+#include <ipu_pixfmt.h>
+
+/* Special MXCFB sync flags are here. */
+#include "../drivers/video/mxcfb.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static uint32_t mx53_dram_size[2];
+
+phys_size_t get_effective_memsize(void)
+{
+ /*
+ * WARNING: We must override get_effective_memsize() function here
+ * to report only the size of the first DRAM bank. This is to make
+ * U-Boot relocator place U-Boot into valid memory, that is, at the
+ * end of the first DRAM bank. If we did not override this function
+ * like so, U-Boot would be placed at the address of the first DRAM
+ * bank + total DRAM size - sizeof(uboot), which in the setup where
+ * each DRAM bank contains 512MiB of DRAM would result in placing
+ * U-Boot into invalid memory area close to the end of the first
+ * DRAM bank.
+ */
+ return mx53_dram_size[0];
+}
+
+int dram_init(void)
+{
+ mx53_dram_size[0] = get_ram_size((void *)PHYS_SDRAM_1, 1 << 30);
+ mx53_dram_size[1] = get_ram_size((void *)PHYS_SDRAM_2, 1 << 30);
+
+ gd->ram_size = mx53_dram_size[0] + mx53_dram_size[1];
+
+ return 0;
+}
+
+int dram_init_banksize(void)
+{
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = mx53_dram_size[0];
+
+ gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
+ gd->bd->bi_dram[1].size = mx53_dram_size[1];
+
+ return 0;
+}
+
+static void setup_iomux_uart(void)
+{
+ static const iomux_v3_cfg_t uart_pads[] = {
+ MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX,
+ MX53_PAD_PATA_DMARQ__UART2_TXD_MUX,
+ };
+
+ imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads));
+}
+
+#ifdef CONFIG_USB_EHCI_MX5
+int board_ehci_hcd_init(int port)
+{
+ if (port == 0) {
+ /* USB OTG PWRON */
+ imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX53_PAD_GPIO_4__GPIO1_4,
+ PAD_CTL_PKE | PAD_CTL_DSE_HIGH));
+ gpio_direction_output(IMX_GPIO_NR(1, 4), 0);
+
+ /* USB OTG Over Current */
+ imx_iomux_v3_setup_pad(MX53_PAD_GPIO_18__GPIO7_13);
+ } else if (port == 1) {
+ /* USB Host PWRON */
+ imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX53_PAD_GPIO_2__GPIO1_2,
+ PAD_CTL_PKE | PAD_CTL_DSE_HIGH));
+ gpio_direction_output(IMX_GPIO_NR(1, 2), 0);
+
+ /* USB Host Over Current */
+ imx_iomux_v3_setup_pad(MX53_PAD_GPIO_3__USBOH3_USBH1_OC);
+ }
+
+ return 0;
+}
+#endif
+
+static void setup_iomux_fec(void)
+{
+ static const iomux_v3_cfg_t fec_pads[] = {
+ /* MDIO pads */
+ NEW_PAD_CTRL(MX53_PAD_FEC_MDIO__FEC_MDIO, PAD_CTL_HYS |
+ PAD_CTL_DSE_HIGH | PAD_CTL_PUS_22K_UP | PAD_CTL_ODE),
+ NEW_PAD_CTRL(MX53_PAD_FEC_MDC__FEC_MDC, PAD_CTL_DSE_HIGH),
+
+ /* FEC 0 pads */
+ NEW_PAD_CTRL(MX53_PAD_FEC_CRS_DV__FEC_RX_DV,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_FEC_REF_CLK__FEC_TX_CLK,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_FEC_RX_ER__FEC_RX_ER,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_FEC_TX_EN__FEC_TX_EN, PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_FEC_RXD0__FEC_RDATA_0,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_FEC_RXD1__FEC_RDATA_1,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_FEC_TXD0__FEC_TDATA_0, PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_FEC_TXD1__FEC_TDATA_1, PAD_CTL_DSE_HIGH),
+
+ /* FEC 1 pads */
+ NEW_PAD_CTRL(MX53_PAD_KEY_COL0__FEC_RDATA_3,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_KEY_ROW0__FEC_TX_ER,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_KEY_COL1__FEC_RX_CLK,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_KEY_ROW1__FEC_COL,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_KEY_COL2__FEC_RDATA_2,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_KEY_ROW2__FEC_TDATA_2, PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_KEY_COL3__FEC_CRS,
+ PAD_CTL_HYS | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_GPIO_19__FEC_TDATA_3, PAD_CTL_DSE_HIGH),
+ };
+
+ imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads));
+}
+
+#ifdef CONFIG_FSL_ESDHC
+struct fsl_esdhc_cfg esdhc_cfg = {
+ MMC_SDHC1_BASE_ADDR,
+};
+
+int board_mmc_getcd(struct mmc *mmc)
+{
+ imx_iomux_v3_setup_pad(MX53_PAD_GPIO_1__GPIO1_1);
+ gpio_direction_input(IMX_GPIO_NR(1, 1));
+
+ return !gpio_get_value(IMX_GPIO_NR(1, 1));
+}
+
+#define SD_CMD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_DSE_HIGH | \
+ PAD_CTL_PUS_100K_UP)
+#define SD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | \
+ PAD_CTL_DSE_HIGH)
+
+int board_mmc_init(bd_t *bis)
+{
+ static const iomux_v3_cfg_t sd1_pads[] = {
+ NEW_PAD_CTRL(MX53_PAD_SD1_CMD__ESDHC1_CMD, SD_CMD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_SD1_CLK__ESDHC1_CLK, SD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_SD1_DATA0__ESDHC1_DAT0, SD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_SD1_DATA1__ESDHC1_DAT1, SD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_SD1_DATA2__ESDHC1_DAT2, SD_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_SD1_DATA3__ESDHC1_DAT3, SD_PAD_CTRL),
+ MX53_PAD_EIM_DA13__GPIO3_13,
+
+ MX53_PAD_EIM_EB3__GPIO2_31, /* SD power */
+ };
+
+ esdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
+
+ imx_iomux_v3_setup_multiple_pads(sd1_pads, ARRAY_SIZE(sd1_pads));
+
+ /* GPIO 2_31 is SD power */
+ gpio_direction_output(IMX_GPIO_NR(2, 31), 0);
+
+ return fsl_esdhc_initialize(bis, &esdhc_cfg);
+}
+#endif
+
+#ifdef CONFIG_VIDEO
+static struct fb_videomode const ampire_wvga = {
+ .name = "Ampire",
+ .refresh = 60,
+ .xres = 800,
+ .yres = 480,
+ .pixclock = 29851, /* picosecond (33.5 MHz) */
+ .left_margin = 89,
+ .right_margin = 164,
+ .upper_margin = 23,
+ .lower_margin = 10,
+ .hsync_len = 10,
+ .vsync_len = 10,
+ .sync = FB_SYNC_CLK_LAT_FALL,
+};
+
+int board_video_skip(void)
+{
+ int ret;
+ ret = ipuv3_fb_init(&ampire_wvga, 1, IPU_PIX_FMT_RGB666);
+ if (ret)
+ printf("Ampire LCD cannot be configured: %d\n", ret);
+ return ret;
+}
+#endif
+
+#define I2C_PAD_CTRL (PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | \
+ PAD_CTL_PUS_100K_UP | PAD_CTL_ODE)
+
+static void setup_iomux_i2c(void)
+{
+ static const iomux_v3_cfg_t i2c_pads[] = {
+ NEW_PAD_CTRL(MX53_PAD_EIM_D16__I2C2_SDA, I2C_PAD_CTRL),
+ NEW_PAD_CTRL(MX53_PAD_EIM_EB2__I2C2_SCL, I2C_PAD_CTRL),
+ };
+
+ imx_iomux_v3_setup_multiple_pads(i2c_pads, ARRAY_SIZE(i2c_pads));
+}
+
+static void setup_iomux_video(void)
+{
+ static const iomux_v3_cfg_t lcd_pads[] = {
+ MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0,
+ MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1,
+ MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2,
+ MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3,
+ MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4,
+ MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5,
+ MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6,
+ MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7,
+ MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8,
+ MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9,
+ MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10,
+ MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11,
+ MX53_PAD_EIM_A17__IPU_DISP1_DAT_12,
+ MX53_PAD_EIM_A18__IPU_DISP1_DAT_13,
+ MX53_PAD_EIM_A19__IPU_DISP1_DAT_14,
+ MX53_PAD_EIM_A20__IPU_DISP1_DAT_15,
+ MX53_PAD_EIM_A21__IPU_DISP1_DAT_16,
+ MX53_PAD_EIM_A22__IPU_DISP1_DAT_17,
+ MX53_PAD_EIM_A23__IPU_DISP1_DAT_18,
+ MX53_PAD_EIM_A24__IPU_DISP1_DAT_19,
+ MX53_PAD_EIM_D31__IPU_DISP1_DAT_20,
+ MX53_PAD_EIM_D30__IPU_DISP1_DAT_21,
+ MX53_PAD_EIM_D26__IPU_DISP1_DAT_22,
+ MX53_PAD_EIM_D27__IPU_DISP1_DAT_23,
+ MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK,
+ MX53_PAD_EIM_DA13__IPU_DI1_D0_CS,
+ MX53_PAD_EIM_DA14__IPU_DI1_D1_CS,
+ MX53_PAD_EIM_DA15__IPU_DI1_PIN1,
+ MX53_PAD_EIM_DA11__IPU_DI1_PIN2,
+ MX53_PAD_EIM_DA12__IPU_DI1_PIN3,
+ MX53_PAD_EIM_A25__IPU_DI1_PIN12,
+ MX53_PAD_EIM_DA10__IPU_DI1_PIN15,
+ };
+
+ imx_iomux_v3_setup_multiple_pads(lcd_pads, ARRAY_SIZE(lcd_pads));
+}
+
+static void setup_iomux_nand(void)
+{
+ static const iomux_v3_cfg_t nand_pads[] = {
+ NEW_PAD_CTRL(MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B,
+ PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B,
+ PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_NANDF_CLE__EMI_NANDF_CLE,
+ PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_NANDF_ALE__EMI_NANDF_ALE,
+ PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B,
+ PAD_CTL_PUS_100K_UP),
+ NEW_PAD_CTRL(MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0,
+ PAD_CTL_PUS_100K_UP),
+ NEW_PAD_CTRL(MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0,
+ PAD_CTL_DSE_HIGH),
+ NEW_PAD_CTRL(MX53_PAD_PATA_DATA0__EMI_NANDF_D_0,
+ PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_PATA_DATA1__EMI_NANDF_D_1,
+ PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_PATA_DATA2__EMI_NANDF_D_2,
+ PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_PATA_DATA3__EMI_NANDF_D_3,
+ PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_PATA_DATA4__EMI_NANDF_D_4,
+ PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_PATA_DATA5__EMI_NANDF_D_5,
+ PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_PATA_DATA6__EMI_NANDF_D_6,
+ PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
+ NEW_PAD_CTRL(MX53_PAD_PATA_DATA7__EMI_NANDF_D_7,
+ PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
+ };
+
+ imx_iomux_v3_setup_multiple_pads(nand_pads, ARRAY_SIZE(nand_pads));
+}
+
+static void m53_set_clock(void)
+{
+ int ret;
+ const uint32_t ref_clk = MXC_HCLK;
+ const uint32_t dramclk = 400;
+ uint32_t cpuclk;
+
+ imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX53_PAD_GPIO_10__GPIO4_0,
+ PAD_CTL_DSE_HIGH | PAD_CTL_PKE));
+ gpio_direction_input(IMX_GPIO_NR(4, 0));
+
+ /* GPIO10 selects modules' CPU speed, 1 = 1200MHz ; 0 = 800MHz */
+ cpuclk = gpio_get_value(IMX_GPIO_NR(4, 0)) ? 1200 : 800;
+
+ ret = mxc_set_clock(ref_clk, cpuclk, MXC_ARM_CLK);
+ if (ret)
+ printf("CPU: Switch CPU clock to %dMHz failed\n", cpuclk);
+
+ ret = mxc_set_clock(ref_clk, dramclk, MXC_PERIPH_CLK);
+ if (ret) {
+ printf("CPU: Switch peripheral clock to %dMHz failed\n",
+ dramclk);
+ }
+
+ ret = mxc_set_clock(ref_clk, dramclk, MXC_DDR_CLK);
+ if (ret)
+ printf("CPU: Switch DDR clock to %dMHz failed\n", dramclk);
+}
+
+static void m53_set_nand(void)
+{
+ u32 i;
+
+ /* NAND flash is muxed on ATA pins */
+ setbits_le32(M4IF_BASE_ADDR + 0xc, M4IF_GENP_WEIM_MM_MASK);
+
+ /* Wait for Grant/Ack sequence (see EIM_CSnGCR2:MUX16_BYP_GRANT) */
+ for (i = 0x4; i < 0x94; i += 0x18) {
+ clrbits_le32(WEIM_BASE_ADDR + i,
+ WEIM_GCR2_MUX16_BYP_GRANT_MASK);
+ }
+
+ mxc_set_clock(0, 33, MXC_NFC_CLK);
+ enable_nfc_clk(1);
+}
+
+int board_early_init_f(void)
+{
+ setup_iomux_uart();
+ setup_iomux_fec();
+ setup_iomux_i2c();
+ setup_iomux_nand();
+ setup_iomux_video();
+
+ m53_set_clock();
+
+ mxc_set_sata_internal_clock();
+
+ /* NAND clock @ 33MHz */
+ m53_set_nand();
+
+ return 0;
+}
+
+int board_init(void)
+{
+ gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
+
+ return 0;
+}
+
+int checkboard(void)
+{
+ puts("Board: Aries M53EVK\n");
+
+ return 0;
+}
+
+/*
+ * NAND SPL
+ */
+#ifdef CONFIG_SPL_BUILD
+void spl_board_init(void)
+{
+ setup_iomux_nand();
+ m53_set_clock();
+ m53_set_nand();
+}
+
+u32 spl_boot_device(void)
+{
+ return BOOT_DEVICE_NAND;
+}
+#endif
diff --git a/board/aries/ma5d4evk/Kconfig b/board/aries/ma5d4evk/Kconfig
new file mode 100644
index 0000000..56b4f4a
--- /dev/null
+++ b/board/aries/ma5d4evk/Kconfig
@@ -0,0 +1,12 @@
+if TARGET_MA5D4EVK
+
+config SYS_BOARD
+ default "ma5d4evk"
+
+config SYS_VENDOR
+ default "aries"
+
+config SYS_CONFIG_NAME
+ default "ma5d4evk"
+
+endif
diff --git a/board/aries/ma5d4evk/MAINTAINERS b/board/aries/ma5d4evk/MAINTAINERS
new file mode 100644
index 0000000..a2fab52
--- /dev/null
+++ b/board/aries/ma5d4evk/MAINTAINERS
@@ -0,0 +1,6 @@
+Aries MA5D4EVK BOARD
+#M: Marek Vasut <marek.vasut@gmail.com>
+S: Orphan (since 2017-07)
+F: board/aries/ma5d4evk/
+F: include/configs/ma5d4evk.h
+F: configs/ma5d4evk_defconfig
diff --git a/board/aries/ma5d4evk/Makefile b/board/aries/ma5d4evk/Makefile
new file mode 100644
index 0000000..b12b5dc
--- /dev/null
+++ b/board/aries/ma5d4evk/Makefile
@@ -0,0 +1,7 @@
+#
+# Copyright (C) 2015 Marek Vasut <marex@denx.de>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += ma5d4evk.o
diff --git a/board/aries/ma5d4evk/ma5d4evk.c b/board/aries/ma5d4evk/ma5d4evk.c
new file mode 100644
index 0000000..b9294fc
--- /dev/null
+++ b/board/aries/ma5d4evk/ma5d4evk.c
@@ -0,0 +1,456 @@
+/*
+ * Copyright (C) 2015 Marek Vasut <marex@denx.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+#include <asm/arch/atmel_mpddrc.h>
+#include <asm/arch/atmel_usba_udc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/sama5d3_smc.h>
+#include <asm/arch/sama5d4.h>
+#include <atmel_hlcdc.h>
+#include <atmel_mci.h>
+#include <lcd.h>
+#include <mmc.h>
+#include <net.h>
+#include <netdev.h>
+#include <spi.h>
+#include <spi_flash.h>
+#include <spl.h>
+#include <version.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static u8 boot_mode_sf;
+
+#ifdef CONFIG_ATMEL_SPI
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+ return bus == 0 && cs == 0;
+}
+
+void spi_cs_activate(struct spi_slave *slave)
+{
+ at91_set_pio_output(AT91_PIO_PORTC, 3, 0);
+}
+
+void spi_cs_deactivate(struct spi_slave *slave)
+{
+ at91_set_pio_output(AT91_PIO_PORTC, 3, 1);
+}
+
+static void ma5d4evk_spi0_hw_init(void)
+{
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 0, 0); /* SPI0_MISO */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 1, 0); /* SPI0_MOSI */
+ at91_pio3_set_a_periph(AT91_PIO_PORTC, 2, 0); /* SPI0_SPCK */
+
+ at91_set_pio_output(AT91_PIO_PORTC, 3, 1); /* SPI0_CS0 */
+
+ /* Enable clock */
+ at91_periph_clk_enable(ATMEL_ID_SPI0);
+}
+#endif /* CONFIG_ATMEL_SPI */
+
+#ifdef CONFIG_CMD_USB
+static void ma5d4evk_usb_hw_init(void)
+{
+ at91_set_pio_output(AT91_PIO_PORTE, 11, 0);
+ at91_set_pio_output(AT91_PIO_PORTE, 14, 0);
+}
+#endif
+
+#ifdef CONFIG_LCD
+vidinfo_t panel_info = {
+ .vl_col = 800,
+ .vl_row = 480,
+ .vl_clk = 33500000,
+ .vl_bpix = LCD_BPP,
+ .vl_tft = 1,
+ .vl_hsync_len = 10,
+ .vl_left_margin = 89,
+ .vl_right_margin = 164,
+ .vl_vsync_len = 10,
+ .vl_upper_margin = 23,
+ .vl_lower_margin = 10,
+ .mmio = ATMEL_BASE_LCDC,
+};
+
+/* No power up/down pin for the LCD pannel */
+void lcd_enable(void) { /* Empty! */ }
+void lcd_disable(void) { /* Empty! */ }
+
+unsigned int has_lcdc(void)
+{
+ return 1;
+}
+
+static void ma5d4evk_lcd_hw_init(void)
+{
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 24, 1); /* LCDPWM */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 25, 0); /* LCDDISP */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 26, 0); /* LCDVSYNC */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 27, 0); /* LCDHSYNC */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 28, 0); /* LCDDOTCK */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 29, 1); /* LCDDEN */
+
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 0, 0); /* LCDD0 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 1, 0); /* LCDD1 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 2, 0); /* LCDD2 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 3, 0); /* LCDD3 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 4, 0); /* LCDD4 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 5, 0); /* LCDD5 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 6, 0); /* LCDD6 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 7, 0); /* LCDD7 */
+
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 8, 0); /* LCDD9 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 9, 0); /* LCDD8 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 10, 0); /* LCDD10 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 11, 0); /* LCDD11 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 12, 0); /* LCDD12 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 13, 0); /* LCDD13 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 14, 0); /* LCDD14 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 15, 0); /* LCDD15 */
+
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 16, 0); /* LCDD16 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 17, 0); /* LCDD17 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 18, 0); /* LCDD18 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 19, 0); /* LCDD19 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 20, 0); /* LCDD20 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 21, 0); /* LCDD21 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 22, 0); /* LCDD22 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTA, 23, 0); /* LCDD23 */
+
+ /* Enable clock */
+ at91_periph_clk_enable(ATMEL_ID_LCDC);
+}
+
+#endif /* CONFIG_LCD */
+
+#ifdef CONFIG_GENERIC_ATMEL_MCI
+/* On-SoM eMMC */
+void ma5d4evk_mci0_hw_init(void)
+{
+ at91_pio3_set_b_periph(AT91_PIO_PORTC, 5, 1); /* MCI1 CDA */
+ at91_pio3_set_b_periph(AT91_PIO_PORTC, 6, 1); /* MCI1 DA0 */
+ at91_pio3_set_b_periph(AT91_PIO_PORTC, 7, 1); /* MCI1 DA1 */
+ at91_pio3_set_b_periph(AT91_PIO_PORTC, 8, 1); /* MCI1 DA2 */
+ at91_pio3_set_b_periph(AT91_PIO_PORTC, 9, 1); /* MCI1 DA3 */
+ at91_pio3_set_b_periph(AT91_PIO_PORTC, 10, 1); /* MCI1 DA4 */
+ at91_pio3_set_b_periph(AT91_PIO_PORTC, 11, 1); /* MCI1 DA5 */
+ at91_pio3_set_b_periph(AT91_PIO_PORTC, 12, 1); /* MCI1 DA6 */
+ at91_pio3_set_b_periph(AT91_PIO_PORTC, 13, 1); /* MCI1 DA7 */
+ at91_pio3_set_b_periph(AT91_PIO_PORTC, 4, 0); /* MCI1 CLK */
+
+ /*
+ * As the mci io internal pull down is too strong, so if the io needs
+ * external pull up, the pull up resistor will be very small, if so
+ * the power consumption will increase, so disable the internal pull
+ * down to save the power.
+ */
+ at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 5, 0);
+ at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 6, 0);
+ at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 7, 0);
+ at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 8, 0);
+ at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 9, 0);
+ at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 10, 0);
+ at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 11, 0);
+ at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 12, 0);
+ at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 13, 0);
+ at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 4, 0);
+
+ /* Enable clock */
+ at91_periph_clk_enable(ATMEL_ID_MCI0);
+}
+
+/* On-board MicroSD slot */
+void ma5d4evk_mci1_hw_init(void)
+{
+ at91_pio3_set_c_periph(AT91_PIO_PORTE, 19, 1); /* MCI1 CDA */
+ at91_pio3_set_c_periph(AT91_PIO_PORTE, 20, 1); /* MCI1 DA0 */
+ at91_pio3_set_c_periph(AT91_PIO_PORTE, 21, 1); /* MCI1 DA1 */
+ at91_pio3_set_c_periph(AT91_PIO_PORTE, 22, 1); /* MCI1 DA2 */
+ at91_pio3_set_c_periph(AT91_PIO_PORTE, 23, 1); /* MCI1 DA3 */
+ at91_pio3_set_c_periph(AT91_PIO_PORTE, 18, 0); /* MCI1 CLK */
+
+ /*
+ * As the mci io internal pull down is too strong, so if the io needs
+ * external pull up, the pull up resistor will be very small, if so
+ * the power consumption will increase, so disable the internal pull
+ * down to save the power.
+ */
+ at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 18, 0);
+ at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 19, 0);
+ at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 20, 0);
+ at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 21, 0);
+ at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 22, 0);
+ at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 23, 0);
+
+ /* Deal with WP pin on the microSD slot. */
+ at91_set_pio_output(AT91_PIO_PORTE, 16, 0);
+ at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 16, 1);
+
+ /* Enable clock */
+ at91_periph_clk_enable(ATMEL_ID_MCI1);
+}
+
+int board_mmc_init(bd_t *bis)
+{
+ int ret;
+ void *mci0 = (void *)ATMEL_BASE_MCI0;
+ void *mci1 = (void *)ATMEL_BASE_MCI1;
+
+ /* De-assert reset on On-SoM eMMC */
+ at91_set_pio_output(AT91_PIO_PORTE, 15, 1);
+ at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 15, 0);
+
+ ret = atmel_mci_init(boot_mode_sf ? mci0 : mci1);
+ if (ret) /* eMMC init failed, skip it. */
+ at91_set_pio_output(AT91_PIO_PORTE, 15, 0);
+
+ /* Enable the power supply to On-board MicroSD */
+ at91_set_pio_output(AT91_PIO_PORTE, 17, 0);
+ ret = atmel_mci_init(boot_mode_sf ? mci1 : mci0);
+ if (ret) /* uSD init failed, power it down. */
+ at91_set_pio_output(AT91_PIO_PORTE, 17, 1);
+
+ return 0;
+}
+#endif /* CONFIG_GENERIC_ATMEL_MCI */
+
+#ifdef CONFIG_MACB
+void ma5d4evk_macb0_hw_init(void)
+{
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 0, 0); /* ETXCK_EREFCK */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 6, 0); /* ERXDV */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 8, 0); /* ERX0 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 9, 0); /* ERX1 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 7, 0); /* ERXER */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 2, 0); /* ETXEN */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 12, 0); /* ETX0 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 13, 0); /* ETX1 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 17, 0); /* EMDIO */
+ at91_pio3_set_a_periph(AT91_PIO_PORTB, 16, 0); /* EMDC */
+
+ /* Enable clock */
+ at91_periph_clk_enable(ATMEL_ID_GMAC0);
+}
+#endif
+
+static void ma5d4evk_serial_hw_init(void)
+{
+ /* USART0 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTD, 13, 1); /* TXD */
+ at91_pio3_set_a_periph(AT91_PIO_PORTD, 12, 0); /* RXD */
+ at91_pio3_set_a_periph(AT91_PIO_PORTD, 11, 0); /* RTS */
+ at91_pio3_set_a_periph(AT91_PIO_PORTD, 10, 0); /* CTS */
+ at91_periph_clk_enable(ATMEL_ID_USART0);
+
+ /* USART1 */
+ at91_pio3_set_a_periph(AT91_PIO_PORTD, 17, 1); /* TXD */
+ at91_pio3_set_a_periph(AT91_PIO_PORTD, 16, 0); /* RXD */
+ at91_pio3_set_a_periph(AT91_PIO_PORTD, 15, 0); /* RTS */
+ at91_pio3_set_a_periph(AT91_PIO_PORTD, 14, 0); /* CTS */
+ at91_periph_clk_enable(ATMEL_ID_USART1);
+}
+
+int board_early_init_f(void)
+{
+ at91_periph_clk_enable(ATMEL_ID_PIOA);
+ at91_periph_clk_enable(ATMEL_ID_PIOB);
+ at91_periph_clk_enable(ATMEL_ID_PIOC);
+ at91_periph_clk_enable(ATMEL_ID_PIOD);
+ at91_periph_clk_enable(ATMEL_ID_PIOE);
+
+ /* Configure LEDs as OFF */
+ at91_set_pio_output(AT91_PIO_PORTD, 28, 0);
+ at91_set_pio_output(AT91_PIO_PORTD, 29, 0);
+ at91_set_pio_output(AT91_PIO_PORTD, 30, 0);
+
+ ma5d4evk_serial_hw_init();
+
+ return 0;
+}
+
+static void board_identify(void)
+{
+ struct spi_flash *sf;
+ sf = spi_flash_probe(CONFIG_SF_DEFAULT_BUS, CONFIG_SF_DEFAULT_CS,
+ CONFIG_SF_DEFAULT_SPEED, CONFIG_SF_DEFAULT_MODE);
+ boot_mode_sf = (sf != NULL);
+}
+
+int board_init(void)
+{
+ /* adress of boot parameters */
+ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+
+#ifdef CONFIG_ATMEL_SPI
+ ma5d4evk_spi0_hw_init();
+#endif
+#ifdef CONFIG_GENERIC_ATMEL_MCI
+ ma5d4evk_mci0_hw_init();
+ ma5d4evk_mci1_hw_init();
+#endif
+#ifdef CONFIG_MACB
+ ma5d4evk_macb0_hw_init();
+#endif
+#ifdef CONFIG_LCD
+ ma5d4evk_lcd_hw_init();
+#endif
+#ifdef CONFIG_CMD_USB
+ ma5d4evk_usb_hw_init();
+#endif
+#ifdef CONFIG_USB_GADGET_ATMEL_USBA
+ at91_udp_hw_init();
+#endif
+
+ board_identify();
+
+ /* Reset CAN controllers */
+ at91_set_pio_output(AT91_PIO_PORTB, 21, 0);
+ udelay(100);
+ at91_set_pio_output(AT91_PIO_PORTB, 21, 1);
+ at91_pio3_set_pio_pulldown(AT91_PIO_PORTB, 21, 0);
+
+ return 0;
+}
+
+int board_late_init(void)
+{
+ setenv("bootmode", boot_mode_sf ? "sf" : "emmc");
+ return 0;
+}
+
+int dram_init(void)
+{
+ gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
+ CONFIG_SYS_SDRAM_SIZE);
+ return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+ int rc = 0;
+
+#ifdef CONFIG_MACB
+ rc = macb_eth_initialize(0, (void *)ATMEL_BASE_GMAC0, 0x00);
+#endif
+
+#ifdef CONFIG_USB_GADGET_ATMEL_USBA
+ usba_udc_probe(&pdata);
+#ifdef CONFIG_USB_ETH_RNDIS
+ usb_eth_initialize(bis);
+#endif
+#endif
+
+ return rc;
+}
+
+/* SPL */
+#ifdef CONFIG_SPL_BUILD
+void spl_board_init(void)
+{
+#ifdef CONFIG_ATMEL_SPI
+ ma5d4evk_spi0_hw_init();
+#endif
+#ifdef CONFIG_GENERIC_ATMEL_MCI
+ ma5d4evk_mci0_hw_init();
+ ma5d4evk_mci1_hw_init();
+#endif
+ board_identify();
+}
+
+void board_boot_order(u32 *spl_boot_list)
+{
+ spl_boot_list[0] = spl_boot_device();
+
+ switch (spl_boot_list[0]) {
+ case BOOT_DEVICE_MMC1:
+ case BOOT_DEVICE_MMC2:
+ spl_boot_list[0] = BOOT_DEVICE_MMC1;
+ break;
+ case BOOT_DEVICE_SPI:
+ break;
+ case BOOT_DEVICE_USB:
+ spl_boot_list[0] = BOOT_DEVICE_MMC2;
+ break;
+ }
+}
+
+static void ddr2_conf(struct atmel_mpddrc_config *ddr2)
+{
+ ddr2->md = (ATMEL_MPDDRC_MD_DBW_32_BITS | ATMEL_MPDDRC_MD_DDR2_SDRAM);
+
+ ddr2->cr = (ATMEL_MPDDRC_CR_NC_COL_10 |
+ ATMEL_MPDDRC_CR_NR_ROW_13 |
+ ATMEL_MPDDRC_CR_CAS_DDR_CAS3 |
+ ATMEL_MPDDRC_CR_NB_8BANKS |
+ ATMEL_MPDDRC_CR_NDQS_DISABLED |
+ ATMEL_MPDDRC_CR_UNAL_SUPPORTED);
+
+ ddr2->rtr = 0x2b0;
+
+ ddr2->tpr0 = (8 << ATMEL_MPDDRC_TPR0_TRAS_OFFSET |
+ 3 << ATMEL_MPDDRC_TPR0_TRCD_OFFSET |
+ 3 << ATMEL_MPDDRC_TPR0_TWR_OFFSET |
+ 10 << ATMEL_MPDDRC_TPR0_TRC_OFFSET |
+ 3 << ATMEL_MPDDRC_TPR0_TRP_OFFSET |
+ 2 << ATMEL_MPDDRC_TPR0_TRRD_OFFSET |
+ 2 << ATMEL_MPDDRC_TPR0_TWTR_OFFSET |
+ 2 << ATMEL_MPDDRC_TPR0_TMRD_OFFSET);
+
+ ddr2->tpr1 = (2 << ATMEL_MPDDRC_TPR1_TXP_OFFSET |
+ 200 << ATMEL_MPDDRC_TPR1_TXSRD_OFFSET |
+ 25 << ATMEL_MPDDRC_TPR1_TXSNR_OFFSET |
+ 23 << ATMEL_MPDDRC_TPR1_TRFC_OFFSET);
+
+ ddr2->tpr2 = (7 << ATMEL_MPDDRC_TPR2_TFAW_OFFSET |
+ 2 << ATMEL_MPDDRC_TPR2_TRTP_OFFSET |
+ 3 << ATMEL_MPDDRC_TPR2_TRPA_OFFSET |
+ 2 << ATMEL_MPDDRC_TPR2_TXARDS_OFFSET |
+ 8 << ATMEL_MPDDRC_TPR2_TXARD_OFFSET);
+}
+
+void mem_init(void)
+{
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+ struct atmel_mpddrc_config ddr2;
+
+ ddr2_conf(&ddr2);
+
+ /* enable MPDDR clock */
+ at91_periph_clk_enable(ATMEL_ID_MPDDRC);
+ writel(AT91_PMC_DDR, &pmc->scer);
+
+ /* DDRAM2 Controller initialize */
+ ddr2_init(ATMEL_BASE_MPDDRC, ATMEL_BASE_DDRCS, &ddr2);
+}
+
+void at91_pmc_init(void)
+{
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+ u32 tmp;
+
+ tmp = AT91_PMC_PLLAR_29 |
+ AT91_PMC_PLLXR_PLLCOUNT(0x3f) |
+ AT91_PMC_PLLXR_MUL(87) |
+ AT91_PMC_PLLXR_DIV(1);
+ at91_plla_init(tmp);
+
+ writel(0x0 << 8, &pmc->pllicpr);
+
+ tmp = AT91_PMC_MCKR_H32MXDIV |
+ AT91_PMC_MCKR_PLLADIV_2 |
+ AT91_PMC_MCKR_MDIV_3 |
+ AT91_PMC_MCKR_CSS_PLLA;
+ at91_mck_init(tmp);
+}
+#endif
diff --git a/board/aries/mcvevk/MAINTAINERS b/board/aries/mcvevk/MAINTAINERS
new file mode 100644
index 0000000..0b719a1
--- /dev/null
+++ b/board/aries/mcvevk/MAINTAINERS
@@ -0,0 +1,5 @@
+Aries MCVEVK BOARD
+#M: Marek Vasut <marek.vasut@gmail.com>
+S: Orphan (since 2017-07)
+F: include/configs/socfpga_mcvevk.h
+F: configs/socfpga_mcvevk_defconfig
diff --git a/board/aries/mcvevk/Makefile b/board/aries/mcvevk/Makefile
new file mode 100644
index 0000000..86f9b78
--- /dev/null
+++ b/board/aries/mcvevk/Makefile
@@ -0,0 +1,9 @@
+#
+# (C) Copyright 2001-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+# (C) Copyright 2010, Thomas Chou <thomas@wytron.com.tw>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y := socfpga.o
diff --git a/board/aries/mcvevk/qts/iocsr_config.h b/board/aries/mcvevk/qts/iocsr_config.h
new file mode 100644
index 0000000..3021830
--- /dev/null
+++ b/board/aries/mcvevk/qts/iocsr_config.h
@@ -0,0 +1,660 @@
+/*
+ * Altera SoCFPGA IOCSR configuration
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef __SOCFPGA_IOCSR_CONFIG_H__
+#define __SOCFPGA_IOCSR_CONFIG_H__
+
+#define CONFIG_HPS_IOCSR_SCANCHAIN0_LENGTH 764
+#define CONFIG_HPS_IOCSR_SCANCHAIN1_LENGTH 1719
+#define CONFIG_HPS_IOCSR_SCANCHAIN2_LENGTH 955
+#define CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH 16766
+
+const unsigned long iocsr_scan_chain0_table[] = {
+ 0x00000000,
+ 0x00000000,
+ 0x0FF00000,
+ 0xC0000000,
+ 0x0000003F,
+ 0x00008000,
+ 0x00000000,
+ 0x18060000,
+ 0x00000060,
+ 0x00000000,
+ 0x00000000,
+ 0x00004000,
+ 0x0C0300C0,
+ 0x00000000,
+ 0x0C000000,
+ 0x0000C030,
+ 0x0000C030,
+ 0x00002000,
+ 0x06018060,
+ 0x06018000,
+ 0x06000018,
+ 0x00006018,
+ 0x01806018,
+ 0x00001000,
+};
+
+const unsigned long iocsr_scan_chain1_table[] = {
+ 0x000C0300,
+ 0x300C0000,
+ 0x300000C0,
+ 0x000000C0,
+ 0x000300C0,
+ 0x00008000,
+ 0x00060180,
+ 0x18060000,
+ 0x18000000,
+ 0x00000060,
+ 0x00018060,
+ 0x00004000,
+ 0x000300C0,
+ 0x0C030000,
+ 0x0C000000,
+ 0x00000030,
+ 0x0000C030,
+ 0x00002000,
+ 0x00018060,
+ 0x06018000,
+ 0x01FE0000,
+ 0xF8000000,
+ 0x00000007,
+ 0x00001000,
+ 0x0300C030,
+ 0x00000000,
+ 0x03000000,
+ 0x0000000C,
+ 0x00000000,
+ 0x00000800,
+ 0x00006018,
+ 0x01806000,
+ 0x00000000,
+ 0x00000000,
+ 0x00001806,
+ 0x00000400,
+ 0x0000300C,
+ 0x00C03000,
+ 0x00C00000,
+ 0x00000003,
+ 0x00000C03,
+ 0x00000200,
+ 0x00001806,
+ 0x00601800,
+ 0x80600000,
+ 0x80000001,
+ 0x00000601,
+ 0x00000100,
+ 0x00001000,
+ 0x00300C00,
+ 0xC0300000,
+ 0xC0000000,
+ 0x00000300,
+ 0x00000080,
+};
+
+const unsigned long iocsr_scan_chain2_table[] = {
+ 0x300C0300,
+ 0x00000000,
+ 0x0FF00000,
+ 0x00000000,
+ 0x0C0300C0,
+ 0x00008000,
+ 0x00060180,
+ 0x00000000,
+ 0x18000000,
+ 0x00018060,
+ 0x06018060,
+ 0x00004000,
+ 0x200300C0,
+ 0x0C030000,
+ 0x0C000000,
+ 0x00000030,
+ 0x0000C030,
+ 0x00002000,
+ 0x00018060,
+ 0x00000000,
+ 0x06000000,
+ 0x00010018,
+ 0x01806018,
+ 0x00001000,
+ 0x0000C030,
+ 0x00000000,
+ 0x03000000,
+ 0x0000000C,
+ 0x00C0300C,
+ 0x00000800,
+};
+
+const unsigned long iocsr_scan_chain3_table[] = {
+ 0x0C420D80,
+ 0x0C3000FF,
+ 0x0A804001,
+ 0x07900000,
+ 0x08020000,
+ 0x00100000,
+ 0x0A800000,
+ 0x07900000,
+ 0x08020000,
+ 0x00100000,
+ 0x20430000,
+ 0x0C003001,
+ 0x00C00481,
+ 0x00000000,
+ 0x00000021,
+ 0x82000004,
+ 0x05400000,
+ 0x03C80000,
+ 0x04010000,
+ 0x00080000,
+ 0x05400000,
+ 0x03C80000,
+ 0x05400000,
+ 0x03C80000,
+ 0x90218000,
+ 0x86001800,
+ 0x00600240,
+ 0x80090218,
+ 0x00000001,
+ 0x40000002,
+ 0x02A00000,
+ 0x01E40000,
+ 0x02A00000,
+ 0x01E40000,
+ 0x02A00000,
+ 0x01E40000,
+ 0x02A00000,
+ 0x01E40000,
+ 0x4810C000,
+ 0x43000C00,
+ 0x00300120,
+ 0xC004810C,
+ 0x12043000,
+ 0x20000300,
+ 0x00040000,
+ 0x50670000,
+ 0x00000010,
+ 0x24590000,
+ 0x00001000,
+ 0xA0000034,
+ 0x0D000001,
+ 0xC0680A28,
+ 0x45034030,
+ 0x12481A01,
+ 0x80A280D0,
+ 0x34030C06,
+ 0x01A01450,
+ 0x280D0000,
+ 0x30C0680A,
+ 0x02490340,
+ 0xD000001A,
+ 0x0680A280,
+ 0x10040000,
+ 0x00200000,
+ 0x10040000,
+ 0x00200000,
+ 0x15000000,
+ 0x0F200000,
+ 0x15000000,
+ 0x0F200000,
+ 0x01FE0000,
+ 0x18000000,
+ 0x01800902,
+ 0x00240860,
+ 0x007F8006,
+ 0x00000000,
+ 0x0A800001,
+ 0x07900000,
+ 0x0A800000,
+ 0x07900000,
+ 0x0A800000,
+ 0x07900000,
+ 0x08020000,
+ 0x00100000,
+ 0x20430000,
+ 0x0C003001,
+ 0x00C00481,
+ 0x00000FF0,
+ 0x4810C000,
+ 0x80000C00,
+ 0x05400000,
+ 0x02480000,
+ 0x04000000,
+ 0x00080000,
+ 0x05400000,
+ 0x03C80000,
+ 0x05400000,
+ 0x03C80000,
+ 0x90218000,
+ 0x86001800,
+ 0x00600240,
+ 0x80090218,
+ 0x24086001,
+ 0x40000600,
+ 0x02A00040,
+ 0x01E40000,
+ 0x02A00000,
+ 0x01E40000,
+ 0x02A00000,
+ 0x01E40000,
+ 0x02A00000,
+ 0x01E40000,
+ 0x4810C000,
+ 0x43000C00,
+ 0x00300120,
+ 0xC004810C,
+ 0x12043000,
+ 0x20000300,
+ 0x00040000,
+ 0x50670000,
+ 0x00000010,
+ 0x24590000,
+ 0x00001000,
+ 0xA0000034,
+ 0x0D000001,
+ 0xC0680A28,
+ 0x49034030,
+ 0x12481A02,
+ 0x80A280D0,
+ 0x34030C06,
+ 0x01A00040,
+ 0x280D0002,
+ 0x30C0680A,
+ 0x02490340,
+ 0xD00A281A,
+ 0x0680A280,
+ 0x10040000,
+ 0x00200000,
+ 0x10040000,
+ 0x00200000,
+ 0x15000000,
+ 0x0F200000,
+ 0x15000000,
+ 0x0F200000,
+ 0x01FE0000,
+ 0x18000000,
+ 0x01800902,
+ 0x00240860,
+ 0x007F8006,
+ 0x00000000,
+ 0x99300001,
+ 0x34343400,
+ 0xAA0D4000,
+ 0x01C3A800,
+ 0xAA0D4000,
+ 0x01C3A890,
+ 0xAA0D4000,
+ 0x01C3A800,
+ 0x00040100,
+ 0x00000800,
+ 0x00000000,
+ 0x00001208,
+ 0x00482000,
+ 0x01000000,
+ 0x00000000,
+ 0x00410482,
+ 0x0006A000,
+ 0x0001B400,
+ 0x00020000,
+ 0x00000400,
+ 0x0002A000,
+ 0x0001E400,
+ 0x5506A000,
+ 0x00E1D400,
+ 0x00000000,
+ 0x2043090C,
+ 0x00003001,
+ 0x90400000,
+ 0x00000000,
+ 0x2020C243,
+ 0x2A835000,
+ 0x0070EA00,
+ 0x2A835000,
+ 0x0070EA24,
+ 0x2A835000,
+ 0x0070EA00,
+ 0x00010040,
+ 0x00000200,
+ 0x00000000,
+ 0x00000482,
+ 0x00120800,
+ 0x00002000,
+ 0x80000000,
+ 0x00104120,
+ 0x00000200,
+ 0xAC0D5F80,
+ 0xFFFFFFFF,
+ 0x14F3690D,
+ 0x1A041414,
+ 0x00D00000,
+ 0x18864000,
+ 0x49247A06,
+ 0x9A28A3D7,
+ 0xF511451E,
+ 0x0356E388,
+ 0x821A0000,
+ 0x0000D000,
+ 0x05140680,
+ 0xD749247A,
+ 0x1E9A28A3,
+ 0x88F51145,
+ 0x00034EE3,
+ 0x00080000,
+ 0x00001000,
+ 0x00080200,
+ 0x00001000,
+ 0x000A8000,
+ 0x00075000,
+ 0x541A8000,
+ 0x03875001,
+ 0x00000000,
+ 0x00000010,
+ 0x0080C000,
+ 0x41000000,
+ 0x00003FC2,
+ 0x00820000,
+ 0xAA0D4000,
+ 0x01C3A800,
+ 0xAA0D4000,
+ 0x01C3A890,
+ 0xAA0D4000,
+ 0x01C3A800,
+ 0x00040000,
+ 0x00000800,
+ 0x00000000,
+ 0x00001208,
+ 0x00482000,
+ 0x00800000,
+ 0x00000000,
+ 0x00410482,
+ 0x0006A000,
+ 0x0001B400,
+ 0x00020000,
+ 0x00000400,
+ 0x00020080,
+ 0x00000400,
+ 0x5506A000,
+ 0x00E1D400,
+ 0x00000000,
+ 0x0000090C,
+ 0x00000010,
+ 0x90400000,
+ 0x00000000,
+ 0x2020C243,
+ 0x2A835000,
+ 0x0070EA00,
+ 0x2A835000,
+ 0x0070EA24,
+ 0x2A835000,
+ 0x0070EA00,
+ 0x00015000,
+ 0x0000F200,
+ 0x00000000,
+ 0x00000482,
+ 0x86120800,
+ 0x00600240,
+ 0x80000000,
+ 0x00104120,
+ 0x00000200,
+ 0xAC0D5F80,
+ 0xFFFFFFFF,
+ 0x14F3690D,
+ 0x1A041414,
+ 0x00D00000,
+ 0x18864000,
+ 0x49247A06,
+ 0xEBCF23D7,
+ 0xF611451E,
+ 0x034E9248,
+ 0x821A038E,
+ 0x0000D000,
+ 0x00000680,
+ 0xD749247A,
+ 0x1E9BCF23,
+ 0x88F61145,
+ 0x00034EE3,
+ 0x00080000,
+ 0x00001000,
+ 0x00080000,
+ 0x00001000,
+ 0x000A8000,
+ 0x00075000,
+ 0x541A8000,
+ 0x03875001,
+ 0x00000000,
+ 0x00000010,
+ 0x0080C000,
+ 0x41000000,
+ 0x00000002,
+ 0x00820004,
+ 0xAA0D4000,
+ 0x01C3A800,
+ 0xAA0D4000,
+ 0x01C3A890,
+ 0xAA0D4000,
+ 0x01C3A800,
+ 0x00040000,
+ 0x00000800,
+ 0x00000000,
+ 0x00001208,
+ 0x00482000,
+ 0x00800000,
+ 0x00000000,
+ 0x00410482,
+ 0x0006A000,
+ 0x0001B400,
+ 0x00020000,
+ 0x00000400,
+ 0x0002A000,
+ 0x0001E400,
+ 0x5506A000,
+ 0x00E1D400,
+ 0x00000000,
+ 0x2043090C,
+ 0x00003001,
+ 0x90400000,
+ 0x00000000,
+ 0x2020C243,
+ 0x2A835000,
+ 0x0070EA00,
+ 0x2A835000,
+ 0x0070EA00,
+ 0x2A835000,
+ 0x0070EA00,
+ 0x00010000,
+ 0x00000200,
+ 0x00000000,
+ 0x00000482,
+ 0x00120800,
+ 0x00200000,
+ 0x80000000,
+ 0x00104120,
+ 0x00000200,
+ 0xAC0D5F80,
+ 0xFFFFFFFF,
+ 0x14F3690D,
+ 0x1A041414,
+ 0x00D00000,
+ 0x18864000,
+ 0x49247A06,
+ 0x9A28A3D7,
+ 0xF431451E,
+ 0x034E9248,
+ 0x821A0000,
+ 0x0000D000,
+ 0x00000680,
+ 0xD749247A,
+ 0x1E9A28A3,
+ 0x88F61145,
+ 0x000356E3,
+ 0x00080000,
+ 0x00001000,
+ 0x00080000,
+ 0x00001000,
+ 0x000A8000,
+ 0x00075000,
+ 0x541A8000,
+ 0x03875001,
+ 0x00000000,
+ 0x00000010,
+ 0x0080C000,
+ 0x41000000,
+ 0x00000002,
+ 0x00820004,
+ 0xAA0D4000,
+ 0x01C3A800,
+ 0xAA0D4000,
+ 0x01C3A800,
+ 0xAA0D4000,
+ 0x01C3A800,
+ 0x00040000,
+ 0x00000800,
+ 0x00000000,
+ 0x00001208,
+ 0x00482000,
+ 0x00800000,
+ 0x00000000,
+ 0x00410482,
+ 0x0006A000,
+ 0x0001B400,
+ 0x00020000,
+ 0x00000400,
+ 0x00020000,
+ 0x00000400,
+ 0x5506A000,
+ 0x00E1D400,
+ 0x00000000,
+ 0x0000090C,
+ 0x00001000,
+ 0x90400000,
+ 0x00000000,
+ 0x2020C243,
+ 0x2A835000,
+ 0x0070EA00,
+ 0x2A835000,
+ 0x0070EA00,
+ 0x2A835000,
+ 0x0070EA00,
+ 0x00010040,
+ 0x00000200,
+ 0x00000000,
+ 0x00000482,
+ 0x00120800,
+ 0x00400000,
+ 0x80000000,
+ 0x00104120,
+ 0x00000200,
+ 0xAC0D5F80,
+ 0xFFFFFFFF,
+ 0x14F1690D,
+ 0x1A041414,
+ 0x00D00000,
+ 0x08864000,
+ 0x49247A02,
+ 0xEBCF23DB,
+ 0xF431451E,
+ 0x0356E388,
+ 0x821A0000,
+ 0x0000D000,
+ 0x00000680,
+ 0xD749247A,
+ 0x1EEBCF23,
+ 0x88F43E79,
+ 0x000356A2,
+ 0x00080000,
+ 0x00001000,
+ 0x00080000,
+ 0x00001000,
+ 0x000A8000,
+ 0x00075000,
+ 0x541A8000,
+ 0x03875001,
+ 0x00000000,
+ 0x00000010,
+ 0x0080C000,
+ 0x41000000,
+ 0x00000002,
+ 0x00820004,
+ 0x00489800,
+ 0x801A1A1A,
+ 0x00000200,
+ 0x80000004,
+ 0x00000200,
+ 0x80000004,
+ 0x00000200,
+ 0x00000004,
+ 0x00000200,
+ 0x00000004,
+ 0x00040000,
+ 0x10000000,
+ 0x00000000,
+ 0x00004000,
+ 0x00010000,
+ 0x40002080,
+ 0x00000100,
+ 0x40000002,
+ 0x00000100,
+ 0x00000002,
+ 0x00000100,
+ 0x40000002,
+ 0x00000100,
+ 0x00000002,
+ 0x00020000,
+ 0x00000000,
+ 0x00000008,
+ 0x00000020,
+ 0x00008000,
+ 0x20001040,
+ 0x00000080,
+ 0x20000001,
+ 0x00000080,
+ 0x20000001,
+ 0x00000080,
+ 0x20000001,
+ 0x00000080,
+ 0x00000001,
+ 0x00010000,
+ 0x04000000,
+ 0x00FF0000,
+ 0x00000000,
+ 0x00004000,
+ 0x00000800,
+ 0xC0000001,
+ 0x00041419,
+ 0x40000000,
+ 0x04000816,
+ 0x000D0000,
+ 0x00006800,
+ 0x00000340,
+ 0xD000001A,
+ 0x06800000,
+ 0x00340000,
+ 0x0001A000,
+ 0x00000D00,
+ 0x40000068,
+ 0x1A000003,
+ 0x00D00000,
+ 0x00068000,
+ 0x00003400,
+ 0x000001A0,
+ 0x00000401,
+ 0x00000008,
+ 0x00000401,
+ 0x00000008,
+ 0x00000401,
+ 0x00000008,
+ 0x00000401,
+ 0x80000008,
+ 0x0000007F,
+ 0x20000000,
+ 0x00000000,
+ 0xE0000080,
+ 0x0000001F,
+ 0x00004000,
+};
+
+
+#endif /* __SOCFPGA_IOCSR_CONFIG_H__ */
diff --git a/board/aries/mcvevk/qts/pinmux_config.h b/board/aries/mcvevk/qts/pinmux_config.h
new file mode 100644
index 0000000..ea2f7ab
--- /dev/null
+++ b/board/aries/mcvevk/qts/pinmux_config.h
@@ -0,0 +1,219 @@
+/*
+ * Altera SoCFPGA PinMux configuration
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef __SOCFPGA_PINMUX_CONFIG_H__
+#define __SOCFPGA_PINMUX_CONFIG_H__
+
+const u8 sys_mgr_init_table[] = {
+ 3, /* EMACIO0 */
+ 3, /* EMACIO1 */
+ 3, /* EMACIO2 */
+ 3, /* EMACIO3 */
+ 3, /* EMACIO4 */
+ 3, /* EMACIO5 */
+ 3, /* EMACIO6 */
+ 3, /* EMACIO7 */
+ 3, /* EMACIO8 */
+ 3, /* EMACIO9 */
+ 3, /* EMACIO10 */
+ 3, /* EMACIO11 */
+ 3, /* EMACIO12 */
+ 3, /* EMACIO13 */
+ 0, /* EMACIO14 */
+ 0, /* EMACIO15 */
+ 0, /* EMACIO16 */
+ 0, /* EMACIO17 */
+ 0, /* EMACIO18 */
+ 0, /* EMACIO19 */
+ 3, /* FLASHIO0 */
+ 0, /* FLASHIO1 */
+ 3, /* FLASHIO2 */
+ 3, /* FLASHIO3 */
+ 3, /* FLASHIO4 */
+ 3, /* FLASHIO5 */
+ 3, /* FLASHIO6 */
+ 3, /* FLASHIO7 */
+ 0, /* FLASHIO8 */
+ 3, /* FLASHIO9 */
+ 3, /* FLASHIO10 */
+ 3, /* FLASHIO11 */
+ 0, /* GENERALIO0 */
+ 1, /* GENERALIO1 */
+ 1, /* GENERALIO2 */
+ 0, /* GENERALIO3 */
+ 0, /* GENERALIO4 */
+ 1, /* GENERALIO5 */
+ 1, /* GENERALIO6 */
+ 1, /* GENERALIO7 */
+ 1, /* GENERALIO8 */
+ 0, /* GENERALIO9 */
+ 0, /* GENERALIO10 */
+ 0, /* GENERALIO11 */
+ 0, /* GENERALIO12 */
+ 2, /* GENERALIO13 */
+ 2, /* GENERALIO14 */
+ 1, /* GENERALIO15 */
+ 1, /* GENERALIO16 */
+ 1, /* GENERALIO17 */
+ 1, /* GENERALIO18 */
+ 0, /* GENERALIO19 */
+ 0, /* GENERALIO20 */
+ 0, /* GENERALIO21 */
+ 0, /* GENERALIO22 */
+ 0, /* GENERALIO23 */
+ 0, /* GENERALIO24 */
+ 0, /* GENERALIO25 */
+ 0, /* GENERALIO26 */
+ 0, /* GENERALIO27 */
+ 0, /* GENERALIO28 */
+ 0, /* GENERALIO29 */
+ 0, /* GENERALIO30 */
+ 0, /* GENERALIO31 */
+ 0, /* MIXED1IO0 */
+ 1, /* MIXED1IO1 */
+ 1, /* MIXED1IO2 */
+ 1, /* MIXED1IO3 */
+ 1, /* MIXED1IO4 */
+ 0, /* MIXED1IO5 */
+ 0, /* MIXED1IO6 */
+ 0, /* MIXED1IO7 */
+ 1, /* MIXED1IO8 */
+ 1, /* MIXED1IO9 */
+ 1, /* MIXED1IO10 */
+ 1, /* MIXED1IO11 */
+ 0, /* MIXED1IO12 */
+ 0, /* MIXED1IO13 */
+ 0, /* MIXED1IO14 */
+ 1, /* MIXED1IO15 */
+ 1, /* MIXED1IO16 */
+ 1, /* MIXED1IO17 */
+ 1, /* MIXED1IO18 */
+ 0, /* MIXED1IO19 */
+ 0, /* MIXED1IO20 */
+ 0, /* MIXED1IO21 */
+ 0, /* MIXED2IO0 */
+ 0, /* MIXED2IO1 */
+ 0, /* MIXED2IO2 */
+ 0, /* MIXED2IO3 */
+ 0, /* MIXED2IO4 */
+ 0, /* MIXED2IO5 */
+ 0, /* MIXED2IO6 */
+ 0, /* MIXED2IO7 */
+ 0, /* GPLINMUX48 */
+ 0, /* GPLINMUX49 */
+ 0, /* GPLINMUX50 */
+ 0, /* GPLINMUX51 */
+ 0, /* GPLINMUX52 */
+ 0, /* GPLINMUX53 */
+ 0, /* GPLINMUX54 */
+ 0, /* GPLINMUX55 */
+ 0, /* GPLINMUX56 */
+ 0, /* GPLINMUX57 */
+ 0, /* GPLINMUX58 */
+ 0, /* GPLINMUX59 */
+ 0, /* GPLINMUX60 */
+ 0, /* GPLINMUX61 */
+ 0, /* GPLINMUX62 */
+ 0, /* GPLINMUX63 */
+ 0, /* GPLINMUX64 */
+ 0, /* GPLINMUX65 */
+ 0, /* GPLINMUX66 */
+ 0, /* GPLINMUX67 */
+ 0, /* GPLINMUX68 */
+ 0, /* GPLINMUX69 */
+ 0, /* GPLINMUX70 */
+ 1, /* GPLMUX0 */
+ 1, /* GPLMUX1 */
+ 1, /* GPLMUX2 */
+ 1, /* GPLMUX3 */
+ 1, /* GPLMUX4 */
+ 1, /* GPLMUX5 */
+ 1, /* GPLMUX6 */
+ 1, /* GPLMUX7 */
+ 1, /* GPLMUX8 */
+ 1, /* GPLMUX9 */
+ 1, /* GPLMUX10 */
+ 1, /* GPLMUX11 */
+ 1, /* GPLMUX12 */
+ 1, /* GPLMUX13 */
+ 1, /* GPLMUX14 */
+ 1, /* GPLMUX15 */
+ 1, /* GPLMUX16 */
+ 1, /* GPLMUX17 */
+ 1, /* GPLMUX18 */
+ 1, /* GPLMUX19 */
+ 1, /* GPLMUX20 */
+ 1, /* GPLMUX21 */
+ 1, /* GPLMUX22 */
+ 1, /* GPLMUX23 */
+ 1, /* GPLMUX24 */
+ 1, /* GPLMUX25 */
+ 1, /* GPLMUX26 */
+ 1, /* GPLMUX27 */
+ 1, /* GPLMUX28 */
+ 1, /* GPLMUX29 */
+ 1, /* GPLMUX30 */
+ 1, /* GPLMUX31 */
+ 1, /* GPLMUX32 */
+ 1, /* GPLMUX33 */
+ 1, /* GPLMUX34 */
+ 1, /* GPLMUX35 */
+ 1, /* GPLMUX36 */
+ 1, /* GPLMUX37 */
+ 1, /* GPLMUX38 */
+ 1, /* GPLMUX39 */
+ 1, /* GPLMUX40 */
+ 1, /* GPLMUX41 */
+ 1, /* GPLMUX42 */
+ 1, /* GPLMUX43 */
+ 1, /* GPLMUX44 */
+ 1, /* GPLMUX45 */
+ 1, /* GPLMUX46 */
+ 1, /* GPLMUX47 */
+ 1, /* GPLMUX48 */
+ 1, /* GPLMUX49 */
+ 1, /* GPLMUX50 */
+ 1, /* GPLMUX51 */
+ 1, /* GPLMUX52 */
+ 1, /* GPLMUX53 */
+ 1, /* GPLMUX54 */
+ 1, /* GPLMUX55 */
+ 1, /* GPLMUX56 */
+ 1, /* GPLMUX57 */
+ 1, /* GPLMUX58 */
+ 1, /* GPLMUX59 */
+ 1, /* GPLMUX60 */
+ 1, /* GPLMUX61 */
+ 1, /* GPLMUX62 */
+ 1, /* GPLMUX63 */
+ 1, /* GPLMUX64 */
+ 1, /* GPLMUX65 */
+ 1, /* GPLMUX66 */
+ 1, /* GPLMUX67 */
+ 1, /* GPLMUX68 */
+ 1, /* GPLMUX69 */
+ 1, /* GPLMUX70 */
+ 0, /* NANDUSEFPGA */
+ 0, /* UART0USEFPGA */
+ 0, /* RGMII1USEFPGA */
+ 0, /* SPIS0USEFPGA */
+ 0, /* CAN0USEFPGA */
+ 0, /* I2C0USEFPGA */
+ 0, /* SDMMCUSEFPGA */
+ 0, /* QSPIUSEFPGA */
+ 0, /* SPIS1USEFPGA */
+ 0, /* RGMII0USEFPGA */
+ 1, /* UART1USEFPGA */
+ 0, /* CAN1USEFPGA */
+ 0, /* USB1USEFPGA */
+ 0, /* I2C3USEFPGA */
+ 0, /* I2C2USEFPGA */
+ 0, /* I2C1USEFPGA */
+ 0, /* SPIM1USEFPGA */
+ 0, /* USB0USEFPGA */
+ 0 /* SPIM0USEFPGA */
+};
+#endif /* __SOCFPGA_PINMUX_CONFIG_H__ */
diff --git a/board/aries/mcvevk/qts/pll_config.h b/board/aries/mcvevk/qts/pll_config.h
new file mode 100644
index 0000000..b718b39
--- /dev/null
+++ b/board/aries/mcvevk/qts/pll_config.h
@@ -0,0 +1,85 @@
+/*
+ * Altera SoCFPGA Clock and PLL configuration
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef __SOCFPGA_PLL_CONFIG_H__
+#define __SOCFPGA_PLL_CONFIG_H__
+
+#define CONFIG_HPS_DBCTRL_STAYOSC1 1
+
+#define CONFIG_HPS_MAINPLLGRP_VCO_DENOM 0
+#define CONFIG_HPS_MAINPLLGRP_VCO_NUMER 63
+#define CONFIG_HPS_MAINPLLGRP_MPUCLK_CNT 0
+#define CONFIG_HPS_MAINPLLGRP_MAINCLK_CNT 0
+#define CONFIG_HPS_MAINPLLGRP_DBGATCLK_CNT 0
+#define CONFIG_HPS_MAINPLLGRP_MAINQSPICLK_CNT 511
+#define CONFIG_HPS_MAINPLLGRP_MAINNANDSDMMCCLK_CNT 511
+#define CONFIG_HPS_MAINPLLGRP_CFGS2FUSER0CLK_CNT 15
+#define CONFIG_HPS_MAINPLLGRP_MAINDIV_L3MPCLK 1
+#define CONFIG_HPS_MAINPLLGRP_MAINDIV_L3SPCLK 1
+#define CONFIG_HPS_MAINPLLGRP_MAINDIV_L4MPCLK 1
+#define CONFIG_HPS_MAINPLLGRP_MAINDIV_L4SPCLK 1
+#define CONFIG_HPS_MAINPLLGRP_DBGDIV_DBGATCLK 0
+#define CONFIG_HPS_MAINPLLGRP_DBGDIV_DBGCLK 1
+#define CONFIG_HPS_MAINPLLGRP_TRACEDIV_TRACECLK 0
+#define CONFIG_HPS_MAINPLLGRP_L4SRC_L4MP 1
+#define CONFIG_HPS_MAINPLLGRP_L4SRC_L4SP 1
+
+#define CONFIG_HPS_PERPLLGRP_VCO_DENOM 0
+#define CONFIG_HPS_PERPLLGRP_VCO_NUMER 39
+#define CONFIG_HPS_PERPLLGRP_VCO_PSRC 0
+#define CONFIG_HPS_PERPLLGRP_EMAC0CLK_CNT 3
+#define CONFIG_HPS_PERPLLGRP_EMAC1CLK_CNT 511
+#define CONFIG_HPS_PERPLLGRP_PERQSPICLK_CNT 511
+#define CONFIG_HPS_PERPLLGRP_PERNANDSDMMCCLK_CNT 4
+#define CONFIG_HPS_PERPLLGRP_PERBASECLK_CNT 4
+#define CONFIG_HPS_PERPLLGRP_S2FUSER1CLK_CNT 511
+#define CONFIG_HPS_PERPLLGRP_DIV_USBCLK 0
+#define CONFIG_HPS_PERPLLGRP_DIV_SPIMCLK 0
+#define CONFIG_HPS_PERPLLGRP_DIV_CAN0CLK 1
+#define CONFIG_HPS_PERPLLGRP_DIV_CAN1CLK 1
+#define CONFIG_HPS_PERPLLGRP_GPIODIV_GPIODBCLK 6249
+#define CONFIG_HPS_PERPLLGRP_SRC_SDMMC 2
+#define CONFIG_HPS_PERPLLGRP_SRC_NAND 2
+#define CONFIG_HPS_PERPLLGRP_SRC_QSPI 1
+
+#define CONFIG_HPS_SDRPLLGRP_VCO_DENOM 0
+#define CONFIG_HPS_SDRPLLGRP_VCO_NUMER 31
+#define CONFIG_HPS_SDRPLLGRP_VCO_SSRC 0
+#define CONFIG_HPS_SDRPLLGRP_DDRDQSCLK_CNT 1
+#define CONFIG_HPS_SDRPLLGRP_DDRDQSCLK_PHASE 0
+#define CONFIG_HPS_SDRPLLGRP_DDR2XDQSCLK_CNT 0
+#define CONFIG_HPS_SDRPLLGRP_DDR2XDQSCLK_PHASE 0
+#define CONFIG_HPS_SDRPLLGRP_DDRDQCLK_CNT 1
+#define CONFIG_HPS_SDRPLLGRP_DDRDQCLK_PHASE 4
+#define CONFIG_HPS_SDRPLLGRP_S2FUSER2CLK_CNT 5
+#define CONFIG_HPS_SDRPLLGRP_S2FUSER2CLK_PHASE 0
+
+#define CONFIG_HPS_CLK_OSC1_HZ 25000000
+#define CONFIG_HPS_CLK_OSC2_HZ 25000000
+#define CONFIG_HPS_CLK_F2S_SDR_REF_HZ 0
+#define CONFIG_HPS_CLK_F2S_PER_REF_HZ 0
+#define CONFIG_HPS_CLK_MAINVCO_HZ 1600000000
+#define CONFIG_HPS_CLK_PERVCO_HZ 1000000000
+#define CONFIG_HPS_CLK_SDRVCO_HZ 800000000
+#define CONFIG_HPS_CLK_EMAC0_HZ 250000000
+#define CONFIG_HPS_CLK_EMAC1_HZ 1953125
+#define CONFIG_HPS_CLK_USBCLK_HZ 200000000
+#define CONFIG_HPS_CLK_NAND_HZ 50000000
+#define CONFIG_HPS_CLK_SDMMC_HZ 200000000
+#define CONFIG_HPS_CLK_QSPI_HZ 3125000
+#define CONFIG_HPS_CLK_SPIM_HZ 200000000
+#define CONFIG_HPS_CLK_CAN0_HZ 100000000
+#define CONFIG_HPS_CLK_CAN1_HZ 100000000
+#define CONFIG_HPS_CLK_GPIODB_HZ 32000
+#define CONFIG_HPS_CLK_L4_MP_HZ 100000000
+#define CONFIG_HPS_CLK_L4_SP_HZ 100000000
+
+#define CONFIG_HPS_ALTERAGRP_MPUCLK 1
+#define CONFIG_HPS_ALTERAGRP_MAINCLK 3
+#define CONFIG_HPS_ALTERAGRP_DBGATCLK 3
+
+
+#endif /* __SOCFPGA_PLL_CONFIG_H__ */
diff --git a/board/aries/mcvevk/qts/sdram_config.h b/board/aries/mcvevk/qts/sdram_config.h
new file mode 100644
index 0000000..ff64f55
--- /dev/null
+++ b/board/aries/mcvevk/qts/sdram_config.h
@@ -0,0 +1,344 @@
+/*
+ * Altera SoCFPGA SDRAM configuration
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef __SOCFPGA_SDRAM_CONFIG_H__
+#define __SOCFPGA_SDRAM_CONFIG_H__
+
+/* SDRAM configuration */
+#define CONFIG_HPS_SDR_CTRLCFG_CPORTRDWR_CPORTRDWR 0x5A56A
+#define CONFIG_HPS_SDR_CTRLCFG_CPORTRMAP_CPORTRMAP 0xB00088
+#define CONFIG_HPS_SDR_CTRLCFG_CPORTWIDTH_CPORTWIDTH 0x44555
+#define CONFIG_HPS_SDR_CTRLCFG_CPORTWMAP_CPORTWMAP 0x2C011000
+#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ADDRORDER 0
+#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_DQSTRKEN 0
+#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ECCCORREN 0
+#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ECCEN 0
+#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_MEMBL 8
+#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_MEMTYPE 2
+#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_NODMPINS 0
+#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_REORDEREN 1
+#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_STARVELIMIT 10
+#define CONFIG_HPS_SDR_CTRLCFG_CTRLWIDTH_CTRLWIDTH 2
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_BANKBITS 3
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_COLBITS 10
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_CSBITS 1
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_ROWBITS 15
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMDEVWIDTH_DEVWIDTH 8
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMIFWIDTH_IFWIDTH 32
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMINTR_INTREN 0
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMODT_READ 0
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMODT_WRITE 1
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_AL 0
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TCL 6
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TCWL 6
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TFAW 16
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TRFC 140
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TRRD 5
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TRCD 6
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TREFI 1560
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TRP 6
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TWR 6
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TWTR 4
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TCCD 4
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TMRD 4
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRAS 14
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRC 20
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRTP 5
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING4_PWRDOWNEXIT 3
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING4_SELFRFSHEXIT 512
+#define CONFIG_HPS_SDR_CTRLCFG_EXTRATIME1_CFG_EXTRA_CTL_CLK_RD_TO_WR 0
+#define CONFIG_HPS_SDR_CTRLCFG_EXTRATIME1_CFG_EXTRA_CTL_CLK_RD_TO_WR_BC 0
+#define CONFIG_HPS_SDR_CTRLCFG_EXTRATIME1_CFG_EXTRA_CTL_CLK_RD_TO_WR_DIFF_CHIP 0
+#define CONFIG_HPS_SDR_CTRLCFG_FIFOCFG_INCSYNC 0
+#define CONFIG_HPS_SDR_CTRLCFG_FIFOCFG_SYNCMODE 0
+#define CONFIG_HPS_SDR_CTRLCFG_FPGAPORTRST 0x0
+#define CONFIG_HPS_SDR_CTRLCFG_LOWPWREQ_SELFRFSHMASK 3
+#define CONFIG_HPS_SDR_CTRLCFG_LOWPWRTIMING_AUTOPDCYCLES 0
+#define CONFIG_HPS_SDR_CTRLCFG_LOWPWRTIMING_CLKDISABLECYCLES 8
+#define CONFIG_HPS_SDR_CTRLCFG_MPPACING_0_THRESHOLD1_31_0 0x20820820
+#define CONFIG_HPS_SDR_CTRLCFG_MPPACING_1_THRESHOLD1_59_32 0x8208208
+#define CONFIG_HPS_SDR_CTRLCFG_MPPACING_1_THRESHOLD2_3_0 0
+#define CONFIG_HPS_SDR_CTRLCFG_MPPACING_2_THRESHOLD2_35_4 0x41041041
+#define CONFIG_HPS_SDR_CTRLCFG_MPPACING_3_THRESHOLD2_59_36 0x410410
+#define CONFIG_HPS_SDR_CTRLCFG_MPPRIORITY_USERPRIORITY 0x3FFD1088
+#define CONFIG_HPS_SDR_CTRLCFG_MPTHRESHOLDRST_0_THRESHOLDRSTCYCLES_31_0 0x01010101
+#define CONFIG_HPS_SDR_CTRLCFG_MPTHRESHOLDRST_1_THRESHOLDRSTCYCLES_63_32 0x01010101
+#define CONFIG_HPS_SDR_CTRLCFG_MPTHRESHOLDRST_2_THRESHOLDRSTCYCLES_79_64 0x0101
+#define CONFIG_HPS_SDR_CTRLCFG_MPWIEIGHT_0_STATICWEIGHT_31_0 0x21084210
+#define CONFIG_HPS_SDR_CTRLCFG_MPWIEIGHT_1_STATICWEIGHT_49_32 0x1EF84
+#define CONFIG_HPS_SDR_CTRLCFG_MPWIEIGHT_1_SUMOFWEIGHT_13_0 0x2020
+#define CONFIG_HPS_SDR_CTRLCFG_MPWIEIGHT_2_SUMOFWEIGHT_45_14 0x0
+#define CONFIG_HPS_SDR_CTRLCFG_MPWIEIGHT_3_SUMOFWEIGHT_63_46 0xF800
+#define CONFIG_HPS_SDR_CTRLCFG_PHYCTRL_PHYCTRL_0 0x200
+#define CONFIG_HPS_SDR_CTRLCFG_PORTCFG_AUTOPCHEN 0
+#define CONFIG_HPS_SDR_CTRLCFG_RFIFOCMAP_RFIFOCMAP 0x760210
+#define CONFIG_HPS_SDR_CTRLCFG_STATICCFG_MEMBL 2
+#define CONFIG_HPS_SDR_CTRLCFG_STATICCFG_USEECCASDATA 0
+#define CONFIG_HPS_SDR_CTRLCFG_WFIFOCMAP_WFIFOCMAP 0x980543
+
+/* Sequencer auto configuration */
+#define RW_MGR_ACTIVATE_0_AND_1 0x0D
+#define RW_MGR_ACTIVATE_0_AND_1_WAIT1 0x0E
+#define RW_MGR_ACTIVATE_0_AND_1_WAIT2 0x10
+#define RW_MGR_ACTIVATE_1 0x0F
+#define RW_MGR_CLEAR_DQS_ENABLE 0x49
+#define RW_MGR_GUARANTEED_READ 0x4C
+#define RW_MGR_GUARANTEED_READ_CONT 0x54
+#define RW_MGR_GUARANTEED_WRITE 0x18
+#define RW_MGR_GUARANTEED_WRITE_WAIT0 0x1B
+#define RW_MGR_GUARANTEED_WRITE_WAIT1 0x1F
+#define RW_MGR_GUARANTEED_WRITE_WAIT2 0x19
+#define RW_MGR_GUARANTEED_WRITE_WAIT3 0x1D
+#define RW_MGR_IDLE 0x00
+#define RW_MGR_IDLE_LOOP1 0x7B
+#define RW_MGR_IDLE_LOOP2 0x7A
+#define RW_MGR_INIT_RESET_0_CKE_0 0x6F
+#define RW_MGR_INIT_RESET_1_CKE_0 0x74
+#define RW_MGR_LFSR_WR_RD_BANK_0 0x22
+#define RW_MGR_LFSR_WR_RD_BANK_0_DATA 0x25
+#define RW_MGR_LFSR_WR_RD_BANK_0_DQS 0x24
+#define RW_MGR_LFSR_WR_RD_BANK_0_NOP 0x23
+#define RW_MGR_LFSR_WR_RD_BANK_0_WAIT 0x32
+#define RW_MGR_LFSR_WR_RD_BANK_0_WL_1 0x21
+#define RW_MGR_LFSR_WR_RD_DM_BANK_0 0x36
+#define RW_MGR_LFSR_WR_RD_DM_BANK_0_DATA 0x39
+#define RW_MGR_LFSR_WR_RD_DM_BANK_0_DQS 0x38
+#define RW_MGR_LFSR_WR_RD_DM_BANK_0_NOP 0x37
+#define RW_MGR_LFSR_WR_RD_DM_BANK_0_WAIT 0x46
+#define RW_MGR_LFSR_WR_RD_DM_BANK_0_WL_1 0x35
+#define RW_MGR_MRS0_DLL_RESET 0x02
+#define RW_MGR_MRS0_DLL_RESET_MIRR 0x08
+#define RW_MGR_MRS0_USER 0x07
+#define RW_MGR_MRS0_USER_MIRR 0x0C
+#define RW_MGR_MRS1 0x03
+#define RW_MGR_MRS1_MIRR 0x09
+#define RW_MGR_MRS2 0x04
+#define RW_MGR_MRS2_MIRR 0x0A
+#define RW_MGR_MRS3 0x05
+#define RW_MGR_MRS3_MIRR 0x0B
+#define RW_MGR_PRECHARGE_ALL 0x12
+#define RW_MGR_READ_B2B 0x59
+#define RW_MGR_READ_B2B_WAIT1 0x61
+#define RW_MGR_READ_B2B_WAIT2 0x6B
+#define RW_MGR_REFRESH_ALL 0x14
+#define RW_MGR_RETURN 0x01
+#define RW_MGR_SGLE_READ 0x7D
+#define RW_MGR_ZQCL 0x06
+
+/* Sequencer defines configuration */
+#define AFI_RATE_RATIO 1
+#define CALIB_LFIFO_OFFSET 7
+#define CALIB_VFIFO_OFFSET 5
+#define ENABLE_SUPER_QUICK_CALIBRATION 0
+#define IO_DELAY_PER_DCHAIN_TAP 25
+#define IO_DELAY_PER_DQS_EN_DCHAIN_TAP 25
+#define IO_DELAY_PER_OPA_TAP 312
+#define IO_DLL_CHAIN_LENGTH 8
+#define IO_DQDQS_OUT_PHASE_MAX 0
+#define IO_DQS_EN_DELAY_MAX 31
+#define IO_DQS_EN_DELAY_OFFSET 0
+#define IO_DQS_EN_PHASE_MAX 7
+#define IO_DQS_IN_DELAY_MAX 31
+#define IO_DQS_IN_RESERVE 4
+#define IO_DQS_OUT_RESERVE 4
+#define IO_IO_IN_DELAY_MAX 31
+#define IO_IO_OUT1_DELAY_MAX 31
+#define IO_IO_OUT2_DELAY_MAX 0
+#define IO_SHIFT_DQS_EN_WHEN_SHIFT_DQS 0
+#define MAX_LATENCY_COUNT_WIDTH 5
+#define READ_VALID_FIFO_SIZE 16
+#define REG_FILE_INIT_SEQ_SIGNATURE 0x55550496
+#define RW_MGR_MEM_ADDRESS_MIRRORING 0
+#define RW_MGR_MEM_DATA_MASK_WIDTH 4
+#define RW_MGR_MEM_DATA_WIDTH 32
+#define RW_MGR_MEM_DQ_PER_READ_DQS 8
+#define RW_MGR_MEM_DQ_PER_WRITE_DQS 8
+#define RW_MGR_MEM_IF_READ_DQS_WIDTH 4
+#define RW_MGR_MEM_IF_WRITE_DQS_WIDTH 4
+#define RW_MGR_MEM_NUMBER_OF_CS_PER_DIMM 1
+#define RW_MGR_MEM_NUMBER_OF_RANKS 1
+#define RW_MGR_MEM_VIRTUAL_GROUPS_PER_READ_DQS 1
+#define RW_MGR_MEM_VIRTUAL_GROUPS_PER_WRITE_DQS 1
+#define RW_MGR_TRUE_MEM_DATA_MASK_WIDTH 4
+#define TINIT_CNTR0_VAL 99
+#define TINIT_CNTR1_VAL 32
+#define TINIT_CNTR2_VAL 32
+#define TRESET_CNTR0_VAL 99
+#define TRESET_CNTR1_VAL 99
+#define TRESET_CNTR2_VAL 10
+
+/* Sequencer ac_rom_init configuration */
+const u32 ac_rom_init[] = {
+ 0x20700000,
+ 0x20780000,
+ 0x10080421,
+ 0x10080520,
+ 0x10090044,
+ 0x100a0008,
+ 0x100b0000,
+ 0x10380400,
+ 0x10080441,
+ 0x100804c0,
+ 0x100a0024,
+ 0x10090010,
+ 0x100b0000,
+ 0x30780000,
+ 0x38780000,
+ 0x30780000,
+ 0x10680000,
+ 0x106b0000,
+ 0x10280400,
+ 0x10480000,
+ 0x1c980000,
+ 0x1c9b0000,
+ 0x1c980008,
+ 0x1c9b0008,
+ 0x38f80000,
+ 0x3cf80000,
+ 0x38780000,
+ 0x18180000,
+ 0x18980000,
+ 0x13580000,
+ 0x135b0000,
+ 0x13580008,
+ 0x135b0008,
+ 0x33780000,
+ 0x10580008,
+ 0x10780000
+};
+
+/* Sequencer inst_rom_init configuration */
+const u32 inst_rom_init[] = {
+ 0x80000,
+ 0x80680,
+ 0x8180,
+ 0x8200,
+ 0x8280,
+ 0x8300,
+ 0x8380,
+ 0x8100,
+ 0x8480,
+ 0x8500,
+ 0x8580,
+ 0x8600,
+ 0x8400,
+ 0x800,
+ 0x8680,
+ 0x880,
+ 0xa680,
+ 0x80680,
+ 0x900,
+ 0x80680,
+ 0x980,
+ 0xa680,
+ 0x8680,
+ 0x80680,
+ 0xb68,
+ 0xcce8,
+ 0xae8,
+ 0x8ce8,
+ 0xb88,
+ 0xec88,
+ 0xa08,
+ 0xac88,
+ 0x80680,
+ 0xce00,
+ 0xcd80,
+ 0xe700,
+ 0xc00,
+ 0x20ce0,
+ 0x20ce0,
+ 0x20ce0,
+ 0x20ce0,
+ 0xd00,
+ 0x680,
+ 0x680,
+ 0x680,
+ 0x680,
+ 0x60e80,
+ 0x61080,
+ 0x61080,
+ 0x61080,
+ 0xa680,
+ 0x8680,
+ 0x80680,
+ 0xce00,
+ 0xcd80,
+ 0xe700,
+ 0xc00,
+ 0x30ce0,
+ 0x30ce0,
+ 0x30ce0,
+ 0x30ce0,
+ 0xd00,
+ 0x680,
+ 0x680,
+ 0x680,
+ 0x680,
+ 0x70e80,
+ 0x71080,
+ 0x71080,
+ 0x71080,
+ 0xa680,
+ 0x8680,
+ 0x80680,
+ 0x1158,
+ 0x6d8,
+ 0x80680,
+ 0x1168,
+ 0x7e8,
+ 0x7e8,
+ 0x87e8,
+ 0x40fe8,
+ 0x410e8,
+ 0x410e8,
+ 0x410e8,
+ 0x1168,
+ 0x7e8,
+ 0x7e8,
+ 0xa7e8,
+ 0x80680,
+ 0x40e88,
+ 0x41088,
+ 0x41088,
+ 0x41088,
+ 0x40f68,
+ 0x410e8,
+ 0x410e8,
+ 0x410e8,
+ 0xa680,
+ 0x40fe8,
+ 0x410e8,
+ 0x410e8,
+ 0x410e8,
+ 0x41008,
+ 0x41088,
+ 0x41088,
+ 0x41088,
+ 0x1100,
+ 0xc680,
+ 0x8680,
+ 0xe680,
+ 0x80680,
+ 0x0,
+ 0x8000,
+ 0xa000,
+ 0xc000,
+ 0x80000,
+ 0x80,
+ 0x8080,
+ 0xa080,
+ 0xc080,
+ 0x80080,
+ 0x9180,
+ 0x8680,
+ 0xa680,
+ 0x80680,
+ 0x40f08,
+ 0x80680
+};
+
+#endif /* __SOCFPGA_SDRAM_CONFIG_H__ */
diff --git a/board/aries/mcvevk/socfpga.c b/board/aries/mcvevk/socfpga.c
new file mode 100644
index 0000000..6be58f0
--- /dev/null
+++ b/board/aries/mcvevk/socfpga.c
@@ -0,0 +1,6 @@
+/*
+ * Copyright (C) 2015 Marek Vasut <marex@denx.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#include <common.h>
generated by cgit v0.10.2 at 2024-07-01 22:26:36 (GMT)