summaryrefslogtreecommitdiff
path: root/board/atmel/at91sam9261ek/at91sam9261ek.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/atmel/at91sam9261ek/at91sam9261ek.c')
-rw-r--r--board/atmel/at91sam9261ek/at91sam9261ek.c36
1 files changed, 36 insertions, 0 deletions
diff --git a/board/atmel/at91sam9261ek/at91sam9261ek.c b/board/atmel/at91sam9261ek/at91sam9261ek.c
index 0817e60..2f6b599 100644
--- a/board/atmel/at91sam9261ek/at91sam9261ek.c
+++ b/board/atmel/at91sam9261ek/at91sam9261ek.c
@@ -57,6 +57,16 @@ static void at91sam9261ek_nand_hw_init(void)
csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
/* Configure SMC CS3 for NAND/SmartMedia */
+#ifdef CONFIG_AT91SAM9G10EK
+ at91_sys_write(AT91_SMC_SETUP(3),
+ AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(0) |
+ AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(0));
+ at91_sys_write(AT91_SMC_PULSE(3),
+ AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(7) |
+ AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(7));
+ at91_sys_write(AT91_SMC_CYCLE(3),
+ AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7));
+#else
at91_sys_write(AT91_SMC_SETUP(3),
AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) |
AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0));
@@ -65,6 +75,7 @@ static void at91sam9261ek_nand_hw_init(void)
AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
at91_sys_write(AT91_SMC_CYCLE(3),
AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
+#endif
at91_sys_write(AT91_SMC_MODE(3),
AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
AT91_SMC_EXNWMODE_DISABLE |
@@ -92,6 +103,21 @@ static void at91sam9261ek_nand_hw_init(void)
static void at91sam9261ek_dm9000_hw_init(void)
{
/* Configure SMC CS2 for DM9000 */
+#ifdef CONFIG_AT91SAM9G10EK
+ at91_sys_write(AT91_SMC_SETUP(2),
+ AT91_SMC_NWESETUP_(3) | AT91_SMC_NCS_WRSETUP_(0) |
+ AT91_SMC_NRDSETUP_(3) | AT91_SMC_NCS_RDSETUP_(0));
+ at91_sys_write(AT91_SMC_PULSE(2),
+ AT91_SMC_NWEPULSE_(6) | AT91_SMC_NCS_WRPULSE_(8) |
+ AT91_SMC_NRDPULSE_(6) | AT91_SMC_NCS_RDPULSE_(8));
+ at91_sys_write(AT91_SMC_CYCLE(2),
+ AT91_SMC_NWECYCLE_(20) | AT91_SMC_NRDCYCLE_(20));
+ at91_sys_write(AT91_SMC_MODE(2),
+ AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
+ AT91_SMC_EXNWMODE_DISABLE |
+ AT91_SMC_BAT_WRITE | AT91_SMC_DBW_16 |
+ AT91_SMC_TDF_(1));
+#else
at91_sys_write(AT91_SMC_SETUP(2),
AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(0) |
AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(0));
@@ -105,6 +131,7 @@ static void at91sam9261ek_dm9000_hw_init(void)
AT91_SMC_EXNWMODE_DISABLE |
AT91_SMC_BAT_WRITE | AT91_SMC_DBW_16 |
AT91_SMC_TDF_(1));
+#endif
/* Configure Reset signal as output */
at91_set_gpio_output(AT91_PIN_PC10, 0);
@@ -169,7 +196,11 @@ static void at91sam9261ek_lcd_hw_init(void)
at91_sys_write(AT91_PMC_SCER, AT91_PMC_HCK1);
+#ifdef CONFIG_AT91SAM9G10EK
+ gd->fb_base = CONFIG_AT91SAM9G10_LCD_BASE;
+#else
gd->fb_base = AT91SAM9261_SRAM_BASE;
+#endif
}
#ifdef CONFIG_LCD_INFO
@@ -207,8 +238,13 @@ int board_init(void)
/* Enable Ctrlc */
console_init_f();
+#ifdef CONFIG_AT91SAM9G10EK
+ /* arch number of AT91SAM9G10EK-Board */
+ gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9G10EK;
+#else
/* arch number of AT91SAM9261EK-Board */
gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9261EK;
+#endif
/* adress of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;