summaryrefslogtreecommitdiff
path: root/board/cerf250
diff options
context:
space:
mode:
Diffstat (limited to 'board/cerf250')
-rw-r--r--board/cerf250/flash.c18
-rw-r--r--board/cerf250/lowlevel_init.S66
2 files changed, 42 insertions, 42 deletions
diff --git a/board/cerf250/flash.c b/board/cerf250/flash.c
index 3ff19bc..a4b201e 100644
--- a/board/cerf250/flash.c
+++ b/board/cerf250/flash.c
@@ -28,7 +28,7 @@
#include <linux/byteorder/swab.h>
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
/* Board support for 1 or 2 flash devices */
#define FLASH_PORT_WIDTH32
@@ -65,7 +65,7 @@ unsigned long flash_init (void)
int i;
ulong size = 0;
- for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+ for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
switch (i) {
case 0:
flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]);
@@ -85,8 +85,8 @@ unsigned long flash_init (void)
/* Protect monitor and environment sectors
*/
flash_protect ( FLAG_PROTECT_SET,
- CFG_FLASH_BASE,
- CFG_FLASH_BASE + monitor_flash_len - 1,
+ CONFIG_SYS_FLASH_BASE,
+ CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
&flash_info[0] );
flash_protect ( FLAG_PROTECT_SET,
@@ -203,10 +203,10 @@ static ulong flash_get_size (FPW *addr, flash_info_t *info)
break;
}
- if (info->sector_count > CFG_MAX_FLASH_SECT) {
+ if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
printf ("** ERROR: sector count %d > max (%d) **\n",
- info->sector_count, CFG_MAX_FLASH_SECT);
- info->sector_count = CFG_MAX_FLASH_SECT;
+ info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
+ info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
}
addr[0] = (FPW) 0x00FF00FF; /* restore read mode */
@@ -276,7 +276,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last)
*addr = (FPW) 0x00D000D0; /* erase confirm */
while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
- if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
+ if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) {
printf ("Timeout\n");
*addr = (FPW) 0x00B000B0; /* suspend erase */
*addr = (FPW) 0x00FF00FF; /* reset to read mode */
@@ -410,7 +410,7 @@ static int write_data (flash_info_t *info, ulong dest, FPW data)
/* wait while polling the status register */
while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
- if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) {
+ if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) {
*addr = (FPW) 0x00FF00FF; /* restore read mode */
return (1);
}
diff --git a/board/cerf250/lowlevel_init.S b/board/cerf250/lowlevel_init.S
index ad3c59f..5bfe53c 100644
--- a/board/cerf250/lowlevel_init.S
+++ b/board/cerf250/lowlevel_init.S
@@ -29,7 +29,7 @@
#include <version.h>
#include <asm/arch/pxa-regs.h>
-DRAM_SIZE: .long CFG_DRAM_SIZE
+DRAM_SIZE: .long CONFIG_SYS_DRAM_SIZE
/* wait for coprocessor write complete */
.macro CPWAIT reg
@@ -49,67 +49,67 @@ lowlevel_init:
/* Set up GPIO pins first ----------------------------------------- */
ldr r0, =GPSR0
- ldr r1, =CFG_GPSR0_VAL
+ ldr r1, =CONFIG_SYS_GPSR0_VAL
str r1, [r0]
ldr r0, =GPSR1
- ldr r1, =CFG_GPSR1_VAL
+ ldr r1, =CONFIG_SYS_GPSR1_VAL
str r1, [r0]
ldr r0, =GPSR2
- ldr r1, =CFG_GPSR2_VAL
+ ldr r1, =CONFIG_SYS_GPSR2_VAL
str r1, [r0]
ldr r0, =GPCR0
- ldr r1, =CFG_GPCR0_VAL
+ ldr r1, =CONFIG_SYS_GPCR0_VAL
str r1, [r0]
ldr r0, =GPCR1
- ldr r1, =CFG_GPCR1_VAL
+ ldr r1, =CONFIG_SYS_GPCR1_VAL
str r1, [r0]
ldr r0, =GPCR2
- ldr r1, =CFG_GPCR2_VAL
+ ldr r1, =CONFIG_SYS_GPCR2_VAL
str r1, [r0]
ldr r0, =GPDR0
- ldr r1, =CFG_GPDR0_VAL
+ ldr r1, =CONFIG_SYS_GPDR0_VAL
str r1, [r0]
ldr r0, =GPDR1
- ldr r1, =CFG_GPDR1_VAL
+ ldr r1, =CONFIG_SYS_GPDR1_VAL
str r1, [r0]
ldr r0, =GPDR2
- ldr r1, =CFG_GPDR2_VAL
+ ldr r1, =CONFIG_SYS_GPDR2_VAL
str r1, [r0]
ldr r0, =GAFR0_L
- ldr r1, =CFG_GAFR0_L_VAL
+ ldr r1, =CONFIG_SYS_GAFR0_L_VAL
str r1, [r0]
ldr r0, =GAFR0_U
- ldr r1, =CFG_GAFR0_U_VAL
+ ldr r1, =CONFIG_SYS_GAFR0_U_VAL
str r1, [r0]
ldr r0, =GAFR1_L
- ldr r1, =CFG_GAFR1_L_VAL
+ ldr r1, =CONFIG_SYS_GAFR1_L_VAL
str r1, [r0]
ldr r0, =GAFR1_U
- ldr r1, =CFG_GAFR1_U_VAL
+ ldr r1, =CONFIG_SYS_GAFR1_U_VAL
str r1, [r0]
ldr r0, =GAFR2_L
- ldr r1, =CFG_GAFR2_L_VAL
+ ldr r1, =CONFIG_SYS_GAFR2_L_VAL
str r1, [r0]
ldr r0, =GAFR2_U
- ldr r1, =CFG_GAFR2_U_VAL
+ ldr r1, =CONFIG_SYS_GAFR2_U_VAL
str r1, [r0]
ldr r0, =PSSR /* enable GPIO pins */
- ldr r1, =CFG_PSSR_VAL
+ ldr r1, =CONFIG_SYS_PSSR_VAL
str r1, [r0]
/* ---------------------------------------------------------------- */
@@ -147,17 +147,17 @@ mem_init:
/* MSC registers: timing, bus width, mem type */
/* MSC0: nCS(0,1) */
- ldr r2, =CFG_MSC0_VAL
+ ldr r2, =CONFIG_SYS_MSC0_VAL
str r2, [r1, #MSC0_OFFSET]
ldr r2, [r1, #MSC0_OFFSET] /* read back to ensure */
/* that data latches */
/* MSC1: nCS(2,3) */
- ldr r2, =CFG_MSC1_VAL
+ ldr r2, =CONFIG_SYS_MSC1_VAL
str r2, [r1, #MSC1_OFFSET]
ldr r2, [r1, #MSC1_OFFSET]
/* MSC2: nCS(4,5) */
- ldr r2, =CFG_MSC2_VAL
+ ldr r2, =CONFIG_SYS_MSC2_VAL
str r2, [r1, #MSC2_OFFSET]
ldr r2, [r1, #MSC2_OFFSET]
@@ -166,37 +166,37 @@ mem_init:
/* ---------------------------------------------------------------- */
/* MECR: Memory Expansion Card Register */
- ldr r2, =CFG_MECR_VAL
+ ldr r2, =CONFIG_SYS_MECR_VAL
str r2, [r1, #MECR_OFFSET]
ldr r2, [r1, #MECR_OFFSET]
/* MCMEM0: Card Interface slot 0 timing */
- ldr r2, =CFG_MCMEM0_VAL
+ ldr r2, =CONFIG_SYS_MCMEM0_VAL
str r2, [r1, #MCMEM0_OFFSET]
ldr r2, [r1, #MCMEM0_OFFSET]
/* MCMEM1: Card Interface slot 1 timing */
- ldr r2, =CFG_MCMEM1_VAL
+ ldr r2, =CONFIG_SYS_MCMEM1_VAL
str r2, [r1, #MCMEM1_OFFSET]
ldr r2, [r1, #MCMEM1_OFFSET]
/* MCATT0: Card Interface Attribute Space Timing, slot 0 */
- ldr r2, =CFG_MCATT0_VAL
+ ldr r2, =CONFIG_SYS_MCATT0_VAL
str r2, [r1, #MCATT0_OFFSET]
ldr r2, [r1, #MCATT0_OFFSET]
/* MCATT1: Card Interface Attribute Space Timing, slot 1 */
- ldr r2, =CFG_MCATT1_VAL
+ ldr r2, =CONFIG_SYS_MCATT1_VAL
str r2, [r1, #MCATT1_OFFSET]
ldr r2, [r1, #MCATT1_OFFSET]
/* MCIO0: Card Interface I/O Space Timing, slot 0 */
- ldr r2, =CFG_MCIO0_VAL
+ ldr r2, =CONFIG_SYS_MCIO0_VAL
str r2, [r1, #MCIO0_OFFSET]
ldr r2, [r1, #MCIO0_OFFSET]
/* MCIO1: Card Interface I/O Space Timing, slot 1 */
- ldr r2, =CFG_MCIO1_VAL
+ ldr r2, =CONFIG_SYS_MCIO1_VAL
str r2, [r1, #MCIO1_OFFSET]
ldr r2, [r1, #MCIO1_OFFSET]
@@ -212,7 +212,7 @@ mem_init:
/* Before accessing MDREFR we need a valid DRI field, so we set */
/* this to power on defaults + DRI field, set SDRAM clocks free running */
- ldr r3, =CFG_MDREFR_VAL
+ ldr r3, =CONFIG_SYS_MDREFR_VAL
ldr r2, =0xFFF
and r3, r3, r2
@@ -243,7 +243,7 @@ mem_init:
/* set MDREFR according to user define with exception of a few bits */
- ldr r4, =CFG_MDREFR_VAL
+ ldr r4, =CONFIG_SYS_MDREFR_VAL
ldr r2, =(MDREFR_K0RUN|MDREFR_K0DB2|MDREFR_K1RUN|MDREFR_K1DB2|\
MDREFR_K2RUN |MDREFR_K2DB2)
and r4, r4, r2
@@ -262,7 +262,7 @@ mem_init:
/* Step 4c: assert MDREFR:E1PIN and E0PIO as desired, set KXFREE */
- ldr r4, =CFG_MDREFR_VAL
+ ldr r4, =CONFIG_SYS_MDREFR_VAL
ldr r2, =(MDREFR_E0PIN|MDREFR_E1PIN|MDREFR_K0FREE| \
MDREFR_K1FREE | MDREFR_K2FREE)
and r4, r4, r2
@@ -274,7 +274,7 @@ mem_init:
/* Step 4d: write MDCNFG with MDCNFG:DEx deasserted (set to 0), to */
/* configure but not enable each SDRAM partition pair. */
- ldr r4, =CFG_MDCNFG_VAL
+ ldr r4, =CONFIG_SYS_MDCNFG_VAL
bic r4, r4, #(MDCNFG_DE0|MDCNFG_DE1)
bic r4, r4, #(MDCNFG_DE2|MDCNFG_DE3)
str r4, [r1, #MDCNFG_OFFSET] /* write back MDCNFG */
@@ -301,7 +301,7 @@ mem_init:
/* documented in SDRAM data sheets. The address(es) used */
/* for this purpose must not be cacheable. */
- ldr r3, =CFG_DRAM_BASE
+ ldr r3, =CONFIG_SYS_DRAM_BASE
.rept 8
str r2, [r3]
.endr
@@ -315,7 +315,7 @@ mem_init:
/* Step 4h: Write MDMRS. */
- ldr r2, =CFG_MDMRS_VAL
+ ldr r2, =CONFIG_SYS_MDMRS_VAL
str r2, [r1, #MDMRS_OFFSET]