summaryrefslogtreecommitdiff
path: root/board/eltec
diff options
context:
space:
mode:
Diffstat (limited to 'board/eltec')
-rw-r--r--board/eltec/bab7xx/bab7xx.c195
-rw-r--r--board/eltec/elppc/misc.c393
-rw-r--r--board/eltec/mhpc/mhpc.c720
3 files changed, 660 insertions, 648 deletions
diff --git a/board/eltec/bab7xx/bab7xx.c b/board/eltec/bab7xx/bab7xx.c
index c75137a..fc48ed5 100644
--- a/board/eltec/bab7xx/bab7xx.c
+++ b/board/eltec/bab7xx/bab7xx.c
@@ -37,17 +37,18 @@
*/
ulong bab7xx_get_bus_freq (void)
{
- /*
- * The GPIO Port 1 on BAB7xx reflects the bus speed.
- */
- volatile struct GPIO *gpio = (struct GPIO *)(CFG_ISA_IO + CFG_NS87308_GPIO_BASE);
+ /*
+ * The GPIO Port 1 on BAB7xx reflects the bus speed.
+ */
+ volatile struct GPIO *gpio =
+ (struct GPIO *) (CFG_ISA_IO + CFG_NS87308_GPIO_BASE);
- unsigned char data = gpio->dta1;
+ unsigned char data = gpio->dta1;
- if (data & 0x02)
- return 66666666;
+ if (data & 0x02)
+ return 66666666;
- return 83333333;
+ return 83333333;
}
/*---------------------------------------------------------------------------*/
@@ -57,24 +58,26 @@ ulong bab7xx_get_bus_freq (void)
*/
ulong bab7xx_get_gclk_freq (void)
{
- static const int pllratio_to_factor[] = {
- 00, 75, 70, 00, 20, 65, 100, 45, 30, 55, 40, 50, 80, 60, 35, 00,
- };
+ static const int pllratio_to_factor[] = {
+ 00, 75, 70, 00, 20, 65, 100, 45, 30, 55, 40, 50, 80, 60, 35,
+ 00,
+ };
- return pllratio_to_factor[get_hid1 () >> 28] * (bab7xx_get_bus_freq() / 10);
+ return pllratio_to_factor[get_hid1 () >> 28] *
+ (bab7xx_get_bus_freq () / 10);
}
/*----------------------------------------------------------------------------*/
int checkcpu (void)
{
- uint pvr = get_pvr();
+ uint pvr = get_pvr ();
- printf ("MPC7xx V%d.%d",(pvr >> 8) & 0xFF, pvr & 0xFF);
- printf (" at %ld / %ld MHz\n", bab7xx_get_gclk_freq()/1000000,
- bab7xx_get_bus_freq()/1000000);
+ printf ("MPC7xx V%d.%d", (pvr >> 8) & 0xFF, pvr & 0xFF);
+ printf (" at %ld / %ld MHz\n", bab7xx_get_gclk_freq () / 1000000,
+ bab7xx_get_bus_freq () / 1000000);
- return (0);
+ return (0);
}
/* ------------------------------------------------------------------------- */
@@ -82,20 +85,20 @@ int checkcpu (void)
int checkboard (void)
{
#ifdef CFG_ADDRESS_MAP_A
- puts ("Board: ELTEC BAB7xx PReP\n");
+ puts ("Board: ELTEC BAB7xx PReP\n");
#else
- puts ("Board: ELTEC BAB7xx CHRP\n");
+ puts ("Board: ELTEC BAB7xx CHRP\n");
#endif
- return (0);
+ return (0);
}
/* ------------------------------------------------------------------------- */
int checkflash (void)
{
- /* TODO: XXX XXX XXX */
- printf ("2 MB ## Test not implemented yet ##\n");
- return (0);
+ /* TODO: XXX XXX XXX */
+ printf ("2 MB ## Test not implemented yet ##\n");
+ return (0);
}
/* ------------------------------------------------------------------------- */
@@ -103,77 +106,75 @@ int checkflash (void)
static unsigned int mpc106_read_cfg_dword (unsigned int reg)
{
- unsigned int reg_addr = MPC106_REG | (reg & 0xFFFFFFFC);
+ unsigned int reg_addr = MPC106_REG | (reg & 0xFFFFFFFC);
- out32r(MPC106_REG_ADDR, reg_addr);
+ out32r (MPC106_REG_ADDR, reg_addr);
- return (in32r(MPC106_REG_DATA | (reg & 0x3)));
+ return (in32r (MPC106_REG_DATA | (reg & 0x3)));
}
/* ------------------------------------------------------------------------- */
long int dram_size (int board_type)
{
- /* No actual initialisation to do - done when setting up
- * PICRs MCCRs ME/SARs etc in ram_init.S.
- */
+ /* No actual initialisation to do - done when setting up
+ * PICRs MCCRs ME/SARs etc in ram_init.S.
+ */
- register unsigned long i, msar1, mear1, memSize;
+ register unsigned long i, msar1, mear1, memSize;
#if defined(CFG_MEMTEST)
- register unsigned long reg;
+ register unsigned long reg;
- printf("Testing DRAM\n");
+ printf ("Testing DRAM\n");
- /* write each mem addr with it's address */
- for (reg = CFG_MEMTEST_START; reg < CFG_MEMTEST_END; reg+=4)
- *reg = reg;
+ /* write each mem addr with it's address */
+ for (reg = CFG_MEMTEST_START; reg < CFG_MEMTEST_END; reg += 4)
+ *reg = reg;
- for (reg = CFG_MEMTEST_START; reg < CFG_MEMTEST_END; reg+=4)
- {
- if (*reg != reg)
- return -1;
- }
+ for (reg = CFG_MEMTEST_START; reg < CFG_MEMTEST_END; reg += 4) {
+ if (*reg != reg)
+ return -1;
+ }
#endif
- /*
- * Since MPC106 memory controller chip has already been set to
- * control all memory, just read and interpret its memory boundery register.
- */
- memSize = 0;
- msar1 = mpc106_read_cfg_dword(MPC106_MSAR1);
- mear1 = mpc106_read_cfg_dword(MPC106_MEAR1);
- i = mpc106_read_cfg_dword(MPC106_MBER) & 0xf;
-
- do
- {
- if (i & 0x01) /* is bank enabled ? */
- memSize += (mear1 & 0xff) - (msar1 & 0xff) + 1;
- msar1 >>= 8;
- mear1 >>= 8;
- i >>= 1;
- } while (i);
-
- return (memSize * 0x100000);
+ /*
+ * Since MPC106 memory controller chip has already been set to
+ * control all memory, just read and interpret its memory boundery register.
+ */
+ memSize = 0;
+ msar1 = mpc106_read_cfg_dword (MPC106_MSAR1);
+ mear1 = mpc106_read_cfg_dword (MPC106_MEAR1);
+ i = mpc106_read_cfg_dword (MPC106_MBER) & 0xf;
+
+ do {
+ if (i & 0x01) /* is bank enabled ? */
+ memSize += (mear1 & 0xff) - (msar1 & 0xff) + 1;
+ msar1 >>= 8;
+ mear1 >>= 8;
+ i >>= 1;
+ } while (i);
+
+ return (memSize * 0x100000);
}
/* ------------------------------------------------------------------------- */
-long int initdram(int board_type)
+long int initdram (int board_type)
{
- return dram_size(board_type);
+ return dram_size (board_type);
}
/* ------------------------------------------------------------------------- */
void after_reloc (ulong dest_addr)
{
- DECLARE_GLOBAL_DATA_PTR;
+ DECLARE_GLOBAL_DATA_PTR;
- /*
- * Jump to the main U-Boot board init code
- */
- board_init_r((gd_t *)gd, dest_addr);
+ /*
+ * Jump to the main U-Boot board init code
+ */
+ board_init_r ((gd_t *) gd, dest_addr);
}
/* ------------------------------------------------------------------------- */
@@ -182,14 +183,13 @@ void after_reloc (ulong dest_addr)
* do_reset is done here because in this case it is board specific, since the
* 7xx CPUs can only be reset by external HW (the RTC in this case).
*/
-void
-do_reset (cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[])
+void do_reset (cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc, char *argv[])
{
#if defined(CONFIG_RTC_MK48T59)
- /* trigger watchdog immediately */
- rtc_set_watchdog(1, RTC_WD_RB_16TH);
+ /* trigger watchdog immediately */
+ rtc_set_watchdog (1, RTC_WD_RB_16TH);
#else
- #error "You must define the macro CONFIG_RTC_MK48T59."
+#error "You must define the macro CONFIG_RTC_MK48T59."
#endif
}
@@ -200,16 +200,16 @@ do_reset (cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[])
* Since the 7xx CPUs don't have an internal watchdog, this function is
* board specific. We use the RTC here.
*/
-void watchdog_reset(void)
+void watchdog_reset (void)
{
#if defined(CONFIG_RTC_MK48T59)
- /* we use a 32 sec watchdog timer */
- rtc_set_watchdog(8, RTC_WD_RB_4);
+ /* we use a 32 sec watchdog timer */
+ rtc_set_watchdog (8, RTC_WD_RB_4);
#else
- #error "You must define the macro CONFIG_RTC_MK48T59."
+#error "You must define the macro CONFIG_RTC_MK48T59."
#endif
}
-#endif /* CONFIG_WATCHDOG */
+#endif /* CONFIG_WATCHDOG */
/* ------------------------------------------------------------------------- */
@@ -218,29 +218,28 @@ extern GraphicDevice smi;
void video_get_info_str (int line_number, char *info)
{
- /* init video info strings for graphic console */
- switch (line_number)
- {
- case 1:
- sprintf (info," MPC7xx V%d.%d at %ld / %ld MHz",
- (get_pvr() >> 8) & 0xFF,
- get_pvr() & 0xFF,
- bab7xx_get_gclk_freq()/1000000,
- bab7xx_get_bus_freq()/1000000);
+ /* init video info strings for graphic console */
+ switch (line_number) {
+ case 1:
+ sprintf (info, " MPC7xx V%d.%d at %ld / %ld MHz",
+ (get_pvr () >> 8) & 0xFF,
+ get_pvr () & 0xFF,
+ bab7xx_get_gclk_freq () / 1000000,
+ bab7xx_get_bus_freq () / 1000000);
+ return;
+ case 2:
+ sprintf (info,
+ " ELTEC BAB7xx with %ld MB DRAM and %ld MB FLASH",
+ dram_size (0) / 0x100000, flash_init () / 0x100000);
+ return;
+ case 3:
+ sprintf (info, " %s", smi.modeIdent);
+ return;
+ }
+
+ /* no more info lines */
+ *info = 0;
return;
- case 2:
- sprintf (info, " ELTEC BAB7xx with %ld MB DRAM and %ld MB FLASH",
- dram_size(0)/0x100000,
- flash_init()/0x100000);
- return;
- case 3:
- sprintf (info, " %s", smi.modeIdent);
- return;
- }
-
- /* no more info lines */
- *info = 0;
- return;
}
#endif
diff --git a/board/eltec/elppc/misc.c b/board/eltec/elppc/misc.c
index f33aef7..1505660 100644
--- a/board/eltec/elppc/misc.c
+++ b/board/eltec/elppc/misc.c
@@ -31,32 +31,32 @@
/* imports */
extern char console_buffer[CFG_CBSIZE];
extern int l2_cache_enable (int l2control);
-extern int eepro100_write_eeprom (struct eth_device* dev, int location,
- int addr_len, unsigned short data);
-extern int read_eeprom (struct eth_device* dev, int location, int addr_len);
+extern int eepro100_write_eeprom (struct eth_device *dev, int location,
+ int addr_len, unsigned short data);
+extern int read_eeprom (struct eth_device *dev, int location, int addr_len);
/*----------------------------------------------------------------------------*/
/*
* read/write to nvram is only byte access
*/
-void *nvram_read(void *dest, const long src, size_t count)
+void *nvram_read (void *dest, const long src, size_t count)
{
- uchar *d = (uchar *) dest;
- uchar *s = (uchar *) (CFG_ENV_MAP_ADRS + src);
+ uchar *d = (uchar *) dest;
+ uchar *s = (uchar *) (CFG_ENV_MAP_ADRS + src);
- while (count--)
- *d++ = *s++;
+ while (count--)
+ *d++ = *s++;
- return dest;
+ return dest;
}
-void nvram_write(long dest, const void *src, size_t count)
+void nvram_write (long dest, const void *src, size_t count)
{
- uchar *d = (uchar *) (CFG_ENV_MAP_ADRS + dest);
- uchar *s = (uchar *) src;
+ uchar *d = (uchar *) (CFG_ENV_MAP_ADRS + dest);
+ uchar *s = (uchar *) src;
- while (count--)
- *d++ = *s++;
+ while (count--)
+ *d++ = *s++;
}
/*----------------------------------------------------------------------------*/
@@ -67,192 +67,199 @@ void nvram_write(long dest, const void *src, size_t count)
*/
int misc_init_r (void)
{
- revinfo eerev;
- u_char *ptr;
- u_int i, l, initSrom, copyNv;
- char buf[256];
- char hex[23] = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, 0, 0,
- 0, 0, 0, 0, 10, 11, 12, 13, 14, 15 };
-
- /* Clock setting for MPC107 i2c */
- mpc107_i2c_init (MPC107_EUMB_ADDR, 0x2b);
-
- /* Reset the EPIC */
- out32r (MPC107_EUMB_GCR, 0xa0000000);
- while (in32r (MPC107_EUMB_GCR) & 0x80000000); /* Wait for reset to complete */
- out32r (MPC107_EUMB_GCR, 0x20000000); /* Put into into mixed mode */
- while (in32r (MPC107_EUMB_IACKR) != 0xff); /* Clear all pending interrupts */
-
- /*
- * Check/Remake revision info
- */
- initSrom = 0;
- copyNv = 0;
-
- /* read out current revision srom contens */
- mpc107_srom_load (0x0000, (u_char*)&eerev, sizeof(revinfo),
- SECOND_DEVICE, FIRST_BLOCK);
-
- /* read out current nvram shadow image */
- nvram_read (buf, CFG_NV_SROM_COPY_ADDR, CFG_SROM_SIZE);
-
- if (strcmp (eerev.magic, "ELTEC") != 0)
- {
- /* srom is not initialized -> create a default revision info */
- for (i = 0, ptr = (u_char *)&eerev; i < sizeof(revinfo); i++)
- *ptr++ = 0x00;
- strcpy(eerev.magic, "ELTEC");
- eerev.revrev[0] = 1;
- eerev.revrev[1] = 0;
- eerev.size = 0x00E0;
- eerev.category[0] = 0x01;
-
- /* node id from dead e128 as default */
- eerev.etheraddr[0] = 0x00;
- eerev.etheraddr[1] = 0x00;
- eerev.etheraddr[2] = 0x5B;
- eerev.etheraddr[3] = 0x00;
- eerev.etheraddr[4] = 0x2E;
- eerev.etheraddr[5] = 0x4D;
-
- /* cache config word for ELPPC */
- *(int*)&eerev.res[0] = 0;
-
- initSrom = 1; /* force dialog */
- copyNv = 1; /* copy to nvram */
- }
-
- if ((copyNv == 0) && (el_srom_checksum((u_char*)&eerev, CFG_SROM_SIZE) !=
- el_srom_checksum((u_char*)buf, CFG_SROM_SIZE)))
- {
- printf ("Invalid revision info copy in nvram !\n");
- printf ("Press key:\n <c> to copy current revision info to nvram.\n");
- printf (" <r> to reenter revision info.\n");
- printf ("=> ");
- if (0 != readline (NULL))
- {
- switch ((char)toupper(console_buffer[0]))
- {
- case 'C':
- copyNv = 1;
- break;
- case 'R':
- copyNv = 1;
- initSrom = 1;
- break;
- }
- }
- }
-
- if (initSrom)
- {
- memcpy (buf, &eerev.revision[0][0], 14); /* save all revision info */
- printf ("Enter revision number (0-9): %c ", eerev.revision[0][0]);
- if (0 != readline (NULL))
- {
- eerev.revision[0][0] = (char)toupper(console_buffer[0]);
- memcpy (&eerev.revision[1][0], buf, 12); /* shift rest of rev info */
- }
-
- printf ("Enter revision character (A-Z): %c ", eerev.revision[0][1]);
- if (1 == readline (NULL))
- {
- eerev.revision[0][1] = (char)toupper(console_buffer[0]);
+ revinfo eerev;
+ u_char *ptr;
+ u_int i, l, initSrom, copyNv;
+ char buf[256];
+ char hex[23] = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, 0, 0,
+ 0, 0, 0, 0, 10, 11, 12, 13, 14, 15
+ };
+
+ /* Clock setting for MPC107 i2c */
+ mpc107_i2c_init (MPC107_EUMB_ADDR, 0x2b);
+
+ /* Reset the EPIC */
+ out32r (MPC107_EUMB_GCR, 0xa0000000);
+ while (in32r (MPC107_EUMB_GCR) & 0x80000000); /* Wait for reset to complete */
+ out32r (MPC107_EUMB_GCR, 0x20000000); /* Put into into mixed mode */
+ while (in32r (MPC107_EUMB_IACKR) != 0xff); /* Clear all pending interrupts */
+
+ /*
+ * Check/Remake revision info
+ */
+ initSrom = 0;
+ copyNv = 0;
+
+ /* read out current revision srom contens */
+ mpc107_srom_load (0x0000, (u_char *) & eerev, sizeof (revinfo),
+ SECOND_DEVICE, FIRST_BLOCK);
+
+ /* read out current nvram shadow image */
+ nvram_read (buf, CFG_NV_SROM_COPY_ADDR, CFG_SROM_SIZE);
+
+ if (strcmp (eerev.magic, "ELTEC") != 0) {
+ /* srom is not initialized -> create a default revision info */
+ for (i = 0, ptr = (u_char *) & eerev; i < sizeof (revinfo);
+ i++)
+ *ptr++ = 0x00;
+ strcpy (eerev.magic, "ELTEC");
+ eerev.revrev[0] = 1;
+ eerev.revrev[1] = 0;
+ eerev.size = 0x00E0;
+ eerev.category[0] = 0x01;
+
+ /* node id from dead e128 as default */
+ eerev.etheraddr[0] = 0x00;
+ eerev.etheraddr[1] = 0x00;
+ eerev.etheraddr[2] = 0x5B;
+ eerev.etheraddr[3] = 0x00;
+ eerev.etheraddr[4] = 0x2E;
+ eerev.etheraddr[5] = 0x4D;
+
+ /* cache config word for ELPPC */
+ *(int *) &eerev.res[0] = 0;
+
+ initSrom = 1; /* force dialog */
+ copyNv = 1; /* copy to nvram */
}
- printf ("Enter board name (V-XXXX-XXXX): %s ", (char *)&eerev.board);
- if (11 == readline (NULL))
- {
- for (i=0; i<11; i++)
- eerev.board[i] = (char)toupper(console_buffer[i]);
- eerev.board[11] = '\0';
+ if ((copyNv == 0)
+ && (el_srom_checksum ((u_char *) & eerev, CFG_SROM_SIZE) !=
+ el_srom_checksum ((u_char *) buf, CFG_SROM_SIZE))) {
+ printf ("Invalid revision info copy in nvram !\n");
+ printf ("Press key:\n <c> to copy current revision info to nvram.\n");
+ printf (" <r> to reenter revision info.\n");
+ printf ("=> ");
+ if (0 != readline (NULL)) {
+ switch ((char) toupper (console_buffer[0])) {
+ case 'C':
+ copyNv = 1;
+ break;
+ case 'R':
+ copyNv = 1;
+ initSrom = 1;
+ break;
+ }
+ }
}
- printf ("Enter serial number: %s ", (char *)&eerev.serial );
- if (6 == readline (NULL))
- {
- for (i=0; i<6; i++)
- eerev.serial[i] = console_buffer[i];
- eerev.serial[6] = '\0';
- }
-
- printf ("Enter ether node ID with leading zero (HEX): %02x%02x%02x%02x%02x%02x ",
- eerev.etheraddr[0], eerev.etheraddr[1],
- eerev.etheraddr[2], eerev.etheraddr[3],
- eerev.etheraddr[4], eerev.etheraddr[5]);
- if (12 == readline (NULL))
- {
- for (i=0; i<12; i+=2)
- eerev.etheraddr[i>>1] = (char)(16*hex[toupper(console_buffer[i])-'0'] +
- hex[toupper(console_buffer[i+1])-'0']);
- }
+ if (initSrom) {
+ memcpy (buf, &eerev.revision[0][0], 14); /* save all revision info */
+ printf ("Enter revision number (0-9): %c ",
+ eerev.revision[0][0]);
+ if (0 != readline (NULL)) {
+ eerev.revision[0][0] =
+ (char) toupper (console_buffer[0]);
+ memcpy (&eerev.revision[1][0], buf, 12); /* shift rest of rev info */
+ }
+
+ printf ("Enter revision character (A-Z): %c ",
+ eerev.revision[0][1]);
+ if (1 == readline (NULL)) {
+ eerev.revision[0][1] =
+ (char) toupper (console_buffer[0]);
+ }
+
+ printf ("Enter board name (V-XXXX-XXXX): %s ",
+ (char *) &eerev.board);
+ if (11 == readline (NULL)) {
+ for (i = 0; i < 11; i++)
+ eerev.board[i] =
+ (char) toupper (console_buffer[i]);
+ eerev.board[11] = '\0';
+ }
+
+ printf ("Enter serial number: %s ", (char *) &eerev.serial);
+ if (6 == readline (NULL)) {
+ for (i = 0; i < 6; i++)
+ eerev.serial[i] = console_buffer[i];
+ eerev.serial[6] = '\0';
+ }
+
+ printf ("Enter ether node ID with leading zero (HEX): %02x%02x%02x%02x%02x%02x ", eerev.etheraddr[0], eerev.etheraddr[1], eerev.etheraddr[2], eerev.etheraddr[3], eerev.etheraddr[4], eerev.etheraddr[5]);
+ if (12 == readline (NULL)) {
+ for (i = 0; i < 12; i += 2)
+ eerev.etheraddr[i >> 1] =
+ (char) (16 *
+ hex[toupper
+ (console_buffer[i]) -
+ '0'] +
+ hex[toupper
+ (console_buffer[i + 1]) -
+ '0']);
+ }
+
+ l = strlen ((char *) &eerev.text);
+ printf ("Add to text section (max 64 chr): %s ",
+ (char *) &eerev.text);
+ if (0 != readline (NULL)) {
+ for (i = l; i < 63; i++)
+ eerev.text[i] = console_buffer[i - l];
+ eerev.text[63] = '\0';
+ }
+
+ /* prepare network eeprom */
+ memset (buf, 0, 128);
+
+ buf[0] = eerev.etheraddr[1];
+ buf[1] = eerev.etheraddr[0];
+ buf[2] = eerev.etheraddr[3];
+ buf[3] = eerev.etheraddr[2];
+ buf[4] = eerev.etheraddr[5];
+ buf[5] = eerev.etheraddr[4];
+
+ *(unsigned short *) &buf[20] = 0x48B2;
+ *(unsigned short *) &buf[22] = 0x0004;
+ *(unsigned short *) &buf[24] = 0x1433;
+
+ printf ("\nSRom: Writing i82559 info ........ ");
+ if (eepro100_srom_store ((unsigned short *) buf) == -1)
+ printf ("FAILED\n");
+ else
+ printf ("OK\n");
+
+ /* update CRC */
+ eerev.crc =
+ el_srom_checksum ((u_char *) eerev.board, eerev.size);
+
+ /* write new values */
+ printf ("\nSRom: Writing revision info ...... ");
+ if (mpc107_srom_store
+ ((BLOCK_SIZE - sizeof (revinfo)), (u_char *) & eerev,
+ sizeof (revinfo), SECOND_DEVICE, FIRST_BLOCK) == -1)
+ printf ("FAILED\n\n");
+ else
+ printf ("OK\n\n");
+
+ /* write new values as shadow image to nvram */
+ nvram_write (CFG_NV_SROM_COPY_ADDR, (void *) &eerev,
+ CFG_SROM_SIZE);
- l = strlen ((char *)&eerev.text);
- printf("Add to text section (max 64 chr): %s ", (char *)&eerev.text );
- if (0 != readline (NULL))
- {
- for (i = l; i<63; i++)
- eerev.text[i] = console_buffer[i-l];
- eerev.text[63] = '\0';
}
- /* prepare network eeprom */
- memset (buf, 0, 128);
-
- buf[0] = eerev.etheraddr[1];
- buf[1] = eerev.etheraddr[0];
- buf[2] = eerev.etheraddr[3];
- buf[3] = eerev.etheraddr[2];
- buf[4] = eerev.etheraddr[5];
- buf[5] = eerev.etheraddr[4];
-
- *(unsigned short *)&buf[20] = 0x48B2;
- *(unsigned short *)&buf[22] = 0x0004;
- *(unsigned short *)&buf[24] = 0x1433;
-
- printf("\nSRom: Writing i82559 info ........ ");
- if (eepro100_srom_store ((unsigned short *)buf) == -1)
- printf("FAILED\n");
- else
- printf("OK\n");
-
- /* update CRC */
- eerev.crc = el_srom_checksum((u_char *)eerev.board, eerev.size);
-
- /* write new values */
- printf("\nSRom: Writing revision info ...... ");
- if (mpc107_srom_store((BLOCK_SIZE-sizeof(revinfo)), (u_char *)&eerev,
- sizeof(revinfo), SECOND_DEVICE, FIRST_BLOCK) == -1)
- printf("FAILED\n\n");
- else
- printf("OK\n\n");
-
- /* write new values as shadow image to nvram */
- nvram_write (CFG_NV_SROM_COPY_ADDR, (void *)&eerev, CFG_SROM_SIZE);
-
- } /*if (initSrom) */
-
- /* copy current values as shadow image to nvram */
- if (initSrom == 0 && copyNv == 1)
- nvram_write (CFG_NV_SROM_COPY_ADDR, (void *)&eerev, CFG_SROM_SIZE);
-
- /* update environment */
- sprintf (buf, "%02x:%02x:%02x:%02x:%02x:%02x",
- eerev.etheraddr[0], eerev.etheraddr[1],
- eerev.etheraddr[2], eerev.etheraddr[3],
- eerev.etheraddr[4], eerev.etheraddr[5]);
- setenv ("ethaddr", buf);
-
- /* set serial console as default */
- if ((ptr = getenv ("console")) == NULL)
- setenv ("console", "serial");
-
- /* print actual board identification */
- printf("Ident: %s Ser %s Rev %c%c\n",
- eerev.board, (char *)&eerev.serial,
- eerev.revision[0][0], eerev.revision[0][1]);
-
- return (0);
+ /*if (initSrom) */
+ /* copy current values as shadow image to nvram */
+ if (initSrom == 0 && copyNv == 1)
+ nvram_write (CFG_NV_SROM_COPY_ADDR, (void *) &eerev,
+ CFG_SROM_SIZE);
+
+ /* update environment */
+ sprintf (buf, "%02x:%02x:%02x:%02x:%02x:%02x",
+ eerev.etheraddr[0], eerev.etheraddr[1],
+ eerev.etheraddr[2], eerev.etheraddr[3],
+ eerev.etheraddr[4], eerev.etheraddr[5]);
+ setenv ("ethaddr", buf);
+
+ /* set serial console as default */
+ if ((ptr = getenv ("console")) == NULL)
+ setenv ("console", "serial");
+
+ /* print actual board identification */
+ printf ("Ident: %s Ser %s Rev %c%c\n",
+ eerev.board, (char *) &eerev.serial,
+ eerev.revision[0][0], eerev.revision[0][1]);
+
+ return (0);
}
/*----------------------------------------------------------------------------*/
diff --git a/board/eltec/mhpc/mhpc.c b/board/eltec/mhpc/mhpc.c
index 76f9f37..bc3d9f4 100644
--- a/board/eltec/mhpc/mhpc.c
+++ b/board/eltec/mhpc/mhpc.c
@@ -38,19 +38,19 @@
/* imports from common/main.c */
extern char console_buffer[CFG_CBSIZE];
-extern void eeprom_init (void);
-extern int eeprom_read (unsigned dev_addr, unsigned offset,
- unsigned char *buffer, unsigned cnt);
-extern int eeprom_write (unsigned dev_addr, unsigned offset,
- unsigned char *buffer, unsigned cnt);
+extern void eeprom_init (void);
+extern int eeprom_read (unsigned dev_addr, unsigned offset,
+ unsigned char *buffer, unsigned cnt);
+extern int eeprom_write (unsigned dev_addr, unsigned offset,
+ unsigned char *buffer, unsigned cnt);
/* globals */
-void *video_hw_init(void);
-void video_set_lut (unsigned int index, /* color number */
- unsigned char r, /* red */
- unsigned char g, /* green */
- unsigned char b /* blue */
- );
+void *video_hw_init (void);
+void video_set_lut (unsigned int index, /* color number */
+ unsigned char r, /* red */
+ unsigned char g, /* green */
+ unsigned char b /* blue */
+ );
GraphicDevice gdev;
@@ -60,79 +60,78 @@ static void video_test_image (void);
static void video_default_lut (unsigned int clut_type);
/* revision info foer MHPC EEPROM offset 480 */
-typedef struct {
- char board[12]; /* 000 - Board Revision information */
- char sensor; /* 012 - Sensor Type information */
- char serial[8]; /* 013 - Board serial number */
- char etheraddr[6]; /* 021 - Ethernet node addresse */
- char revision[2]; /* 027 - Revision code */
- char option[3]; /* 029 - resevered for options */
+typedef struct {
+ char board[12]; /* 000 - Board Revision information */
+ char sensor; /* 012 - Sensor Type information */
+ char serial[8]; /* 013 - Board serial number */
+ char etheraddr[6]; /* 021 - Ethernet node addresse */
+ char revision[2]; /* 027 - Revision code */
+ char option[3]; /* 029 - resevered for options */
} revinfo;
/* ------------------------------------------------------------------------- */
-static const unsigned int sdram_table[] =
-{
- /* read single beat cycle */
- 0xef0efc04, 0x0e2dac04, 0x01ba5c04, 0x1ff5fc00,
- 0xfffffc05, 0xeffafc34, 0x0ff0bc34, 0x1ff57c35,
-
- /* read burst cycle */
- 0xef0efc04, 0x0e3dac04, 0x10ff5c04, 0xf0fffc00,
- 0xf0fffc00, 0xf1fffc00, 0xfffffc00, 0xfffffc05,
- 0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
- 0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
-
- /* write single beat cycle */
- 0xef0efc04, 0x0e29ac00, 0x01b25c04, 0x1ff5fc05,
- 0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
-
- /* write burst cycle */
- 0xef0ef804, 0x0e39a000, 0x10f75000, 0xf0fff440,
- 0xf0fffc40, 0xf1fffc04, 0xfffffc05, 0xfffffc04,
- 0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
- 0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
-
- /* periodic timer expired */
- 0xeffebc84, 0x1ffd7c04, 0xfffffc04, 0xfffffc84,
- 0xeffebc04, 0x1ffd7c04, 0xfffffc04, 0xfffffc05,
- 0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
-
- /* exception */
- 0xfffffc04, 0xfffffc05, 0xfffffc04, 0xfffffc04
+static const unsigned int sdram_table[] = {
+ /* read single beat cycle */
+ 0xef0efc04, 0x0e2dac04, 0x01ba5c04, 0x1ff5fc00,
+ 0xfffffc05, 0xeffafc34, 0x0ff0bc34, 0x1ff57c35,
+
+ /* read burst cycle */
+ 0xef0efc04, 0x0e3dac04, 0x10ff5c04, 0xf0fffc00,
+ 0xf0fffc00, 0xf1fffc00, 0xfffffc00, 0xfffffc05,
+ 0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
+ 0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
+
+ /* write single beat cycle */
+ 0xef0efc04, 0x0e29ac00, 0x01b25c04, 0x1ff5fc05,
+ 0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
+
+ /* write burst cycle */
+ 0xef0ef804, 0x0e39a000, 0x10f75000, 0xf0fff440,
+ 0xf0fffc40, 0xf1fffc04, 0xfffffc05, 0xfffffc04,
+ 0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
+ 0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
+
+ /* periodic timer expired */
+ 0xeffebc84, 0x1ffd7c04, 0xfffffc04, 0xfffffc84,
+ 0xeffebc04, 0x1ffd7c04, 0xfffffc04, 0xfffffc05,
+ 0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
+
+ /* exception */
+ 0xfffffc04, 0xfffffc05, 0xfffffc04, 0xfffffc04
};
/* ------------------------------------------------------------------------- */
int board_early_init_f (void)
{
- volatile immap_t *im = (immap_t *)CFG_IMMR;
- volatile cpm8xx_t *cp = &(im->im_cpm);
- volatile iop8xx_t *ip = (iop8xx_t *)&(im->im_ioport);
-
- /* reset the port A s.a. cpm-routines */
- ip->iop_padat = 0x0000;
- ip->iop_papar = 0x0000;
- ip->iop_padir = 0x0800;
- ip->iop_paodr = 0x0000;
-
- /* reset the port B for digital and LCD output */
- cp->cp_pbdat = 0x0300;
- cp->cp_pbpar = 0x5001;
- cp->cp_pbdir = 0x5301;
- cp->cp_pbodr = 0x0000;
-
- /* reset the port C configured for SMC1 serial port and aqc. control */
- ip->iop_pcdat = 0x0800;
- ip->iop_pcpar = 0x0000;
- ip->iop_pcdir = 0x0e30;
- ip->iop_pcso = 0x0000;
-
- /* Config port D for LCD output */
- ip->iop_pdpar = 0x1fff;
- ip->iop_pddir = 0x1fff;
-
- return (0);
+ volatile immap_t *im = (immap_t *) CFG_IMMR;
+ volatile cpm8xx_t *cp = &(im->im_cpm);
+ volatile iop8xx_t *ip = (iop8xx_t *) & (im->im_ioport);
+
+ /* reset the port A s.a. cpm-routines */
+ ip->iop_padat = 0x0000;
+ ip->iop_papar = 0x0000;
+ ip->iop_padir = 0x0800;
+ ip->iop_paodr = 0x0000;
+
+ /* reset the port B for digital and LCD output */
+ cp->cp_pbdat = 0x0300;
+ cp->cp_pbpar = 0x5001;
+ cp->cp_pbdir = 0x5301;
+ cp->cp_pbodr = 0x0000;
+
+ /* reset the port C configured for SMC1 serial port and aqc. control */
+ ip->iop_pcdat = 0x0800;
+ ip->iop_pcpar = 0x0000;
+ ip->iop_pcdir = 0x0e30;
+ ip->iop_pcso = 0x0000;
+
+ /* Config port D for LCD output */
+ ip->iop_pdpar = 0x1fff;
+ ip->iop_pddir = 0x1fff;
+
+ return (0);
}
/* ------------------------------------------------------------------------- */
@@ -142,322 +141,327 @@ int board_early_init_f (void)
*/
int checkboard (void)
{
- puts ("Board: ELTEC miniHiperCam\n");
- return(0);
+ puts ("Board: ELTEC miniHiperCam\n");
+ return (0);
}
/* ------------------------------------------------------------------------- */
-int misc_init_r(void)
+int misc_init_r (void)
{
- revinfo mhpcRevInfo;
- char nid[32];
- char *mhpcSensorTypes[] = { "OMNIVISON OV7610/7620 color",
- "OMNIVISON OV7110 b&w", NULL };
- char hex[23] = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, 0, 0,
- 0, 0, 0, 0, 10, 11, 12, 13, 14, 15 };
- int i;
-
- /* check revision data */
- eeprom_read (CFG_I2C_EEPROM_ADDR, 480, (char*)&mhpcRevInfo, 32);
-
- if (strncmp((char *)&mhpcRevInfo.board[2], "MHPC", 4) != 0)
- {
- printf ("Enter revision number (0-9): %c ", mhpcRevInfo.revision[0]);
- if (0 != readline (NULL))
- {
- mhpcRevInfo.revision[0] = (char)toupper(console_buffer[0]);
- }
-
- printf ("Enter revision character (A-Z): %c ", mhpcRevInfo.revision[1]);
- if (1 == readline (NULL))
- {
- mhpcRevInfo.revision[1] = (char)toupper(console_buffer[0]);
- }
-
- printf("Enter board name (V-XXXX-XXXX): %s ", (char *)&mhpcRevInfo.board);
- if (11 == readline (NULL))
- {
- for (i=0; i<11; i++)
- {
- mhpcRevInfo.board[i] = (char)toupper(console_buffer[i]);
- mhpcRevInfo.board[11] = '\0';
- }
- }
-
- printf("Supported sensor types:\n");
- i=0;
- do
- {
- printf("\n \'%d\' : %s\n", i, mhpcSensorTypes[i]);
- } while ( mhpcSensorTypes[++i] != NULL );
-
- do
- {
- printf("\nEnter sensor number (0-255): %d ", (int)mhpcRevInfo.sensor );
- if (0 != readline (NULL))
- {
- mhpcRevInfo.sensor = (unsigned char)simple_strtoul(console_buffer, NULL, 10);
- }
- } while ( mhpcRevInfo.sensor >= i );
-
- printf("Enter serial number: %s ", (char *)&mhpcRevInfo.serial );
- if (6 == readline (NULL))
- {
- for (i=0; i<6; i++)
- {
- mhpcRevInfo.serial[i] = console_buffer[i];
- }
- mhpcRevInfo.serial[6] = '\0';
- }
-
- printf("Enter ether node ID with leading zero (HEX): %02x%02x%02x%02x%02x%02x ",
- mhpcRevInfo.etheraddr[0], mhpcRevInfo.etheraddr[1],
- mhpcRevInfo.etheraddr[2], mhpcRevInfo.etheraddr[3],
- mhpcRevInfo.etheraddr[4], mhpcRevInfo.etheraddr[5] );
- if (12 == readline (NULL))
- {
- for (i=0; i<12; i+=2)
- {
- mhpcRevInfo.etheraddr[i>>1] = (char)(16*hex[toupper(console_buffer[i])-'0'] +
- hex[toupper(console_buffer[i+1])-'0']);
+ revinfo mhpcRevInfo;
+ char nid[32];
+ char *mhpcSensorTypes[] = { "OMNIVISON OV7610/7620 color",
+ "OMNIVISON OV7110 b&w", NULL
+ };
+ char hex[23] = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, 0, 0,
+ 0, 0, 0, 0, 10, 11, 12, 13, 14, 15
+ };
+ int i;
+
+ /* check revision data */
+ eeprom_read (CFG_I2C_EEPROM_ADDR, 480, (char *) &mhpcRevInfo, 32);
+
+ if (strncmp ((char *) &mhpcRevInfo.board[2], "MHPC", 4) != 0) {
+ printf ("Enter revision number (0-9): %c ",
+ mhpcRevInfo.revision[0]);
+ if (0 != readline (NULL)) {
+ mhpcRevInfo.revision[0] =
+ (char) toupper (console_buffer[0]);
+ }
+
+ printf ("Enter revision character (A-Z): %c ",
+ mhpcRevInfo.revision[1]);
+ if (1 == readline (NULL)) {
+ mhpcRevInfo.revision[1] =
+ (char) toupper (console_buffer[0]);
+ }
+
+ printf ("Enter board name (V-XXXX-XXXX): %s ",
+ (char *) &mhpcRevInfo.board);
+ if (11 == readline (NULL)) {
+ for (i = 0; i < 11; i++) {
+ mhpcRevInfo.board[i] =
+ (char) toupper (console_buffer[i]);
+ mhpcRevInfo.board[11] = '\0';
+ }
+ }
+
+ printf ("Supported sensor types:\n");
+ i = 0;
+ do {
+ printf ("\n \'%d\' : %s\n", i, mhpcSensorTypes[i]);
+ } while (mhpcSensorTypes[++i] != NULL);
+
+ do {
+ printf ("\nEnter sensor number (0-255): %d ",
+ (int) mhpcRevInfo.sensor);
+ if (0 != readline (NULL)) {
+ mhpcRevInfo.sensor =
+ (unsigned char)
+ simple_strtoul (console_buffer, NULL,
+ 10);
+ }
+ } while (mhpcRevInfo.sensor >= i);
+
+ printf ("Enter serial number: %s ",
+ (char *) &mhpcRevInfo.serial);
+ if (6 == readline (NULL)) {
+ for (i = 0; i < 6; i++) {
+ mhpcRevInfo.serial[i] = console_buffer[i];
+ }
+ mhpcRevInfo.serial[6] = '\0';
+ }
+
+ printf ("Enter ether node ID with leading zero (HEX): %02x%02x%02x%02x%02x%02x ", mhpcRevInfo.etheraddr[0], mhpcRevInfo.etheraddr[1], mhpcRevInfo.etheraddr[2], mhpcRevInfo.etheraddr[3], mhpcRevInfo.etheraddr[4], mhpcRevInfo.etheraddr[5]);
+ if (12 == readline (NULL)) {
+ for (i = 0; i < 12; i += 2) {
+ mhpcRevInfo.etheraddr[i >> 1] =
+ (char) (16 *
+ hex[toupper
+ (console_buffer[i]) -
+ '0'] +
+ hex[toupper
+ (console_buffer[i + 1]) -
+ '0']);
+ }
+ }
+
+ /* setup new revision data */
+ eeprom_write (CFG_I2C_EEPROM_ADDR, 480, (char *) &mhpcRevInfo,
+ 32);
}
- }
-
- /* setup new revision data */
- eeprom_write (CFG_I2C_EEPROM_ADDR, 480, (char*)&mhpcRevInfo, 32);
- }
-
- /* set environment */
- sprintf( nid, "%02x:%02x:%02x:%02x:%02x:%02x",
- mhpcRevInfo.etheraddr[0], mhpcRevInfo.etheraddr[1],
- mhpcRevInfo.etheraddr[2], mhpcRevInfo.etheraddr[3],
- mhpcRevInfo.etheraddr[4], mhpcRevInfo.etheraddr[5]);
- setenv("ethaddr", nid);
-
- /* print actual board identification */
- printf("Ident: %s %s Ser %s Rev %c%c\n",
- mhpcRevInfo.board, (mhpcRevInfo.sensor==0?"color":"b&w"),
- (char *)&mhpcRevInfo.serial,
- mhpcRevInfo.revision[0], mhpcRevInfo.revision[1]);
-
- return (0);
+
+ /* set environment */
+ sprintf (nid, "%02x:%02x:%02x:%02x:%02x:%02x",
+ mhpcRevInfo.etheraddr[0], mhpcRevInfo.etheraddr[1],
+ mhpcRevInfo.etheraddr[2], mhpcRevInfo.etheraddr[3],
+ mhpcRevInfo.etheraddr[4], mhpcRevInfo.etheraddr[5]);
+ setenv ("ethaddr", nid);
+
+ /* print actual board identification */
+ printf ("Ident: %s %s Ser %s Rev %c%c\n",
+ mhpcRevInfo.board,
+ (mhpcRevInfo.sensor == 0 ? "color" : "b&w"),
+ (char *) &mhpcRevInfo.serial, mhpcRevInfo.revision[0],
+ mhpcRevInfo.revision[1]);
+
+ return (0);
}
/* ------------------------------------------------------------------------- */
long int initdram (int board_type)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
-
- upmconfig(UPMA, (uint *)sdram_table, sizeof(sdram_table)/sizeof(uint));
-
- memctl->memc_mamr = CFG_MAMR & (~(MAMR_PTAE)); /* no refresh yet */
- memctl->memc_mbmr = MBMR_GPL_B4DIS; /* should this be mamr? - NTL */
- memctl->memc_mptpr = MPTPR_PTP_DIV64;
- memctl->memc_mar = 0x00008800;
-
- /*
- * Map controller SDRAM bank 0
- */
- memctl->memc_or1 = CFG_OR1_PRELIM;
- memctl->memc_br1 = CFG_BR1_PRELIM;
- udelay(200);
-
- /*
- * Map controller SDRAM bank 1
- */
- memctl->memc_or2 = CFG_OR2;
- memctl->memc_br2 = CFG_BR2;
-
- /*
- * Perform SDRAM initializsation sequence
- */
- memctl->memc_mcr = 0x80002105; /* SDRAM bank 0 */
- udelay(1);
- memctl->memc_mcr = 0x80002730; /* SDRAM bank 0 - execute twice */
- udelay(1);
- memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */
-
- udelay(10000);
-
- /* leave place for framebuffers */
- return (SDRAM_MAX_SIZE-SDRAM_RES_SIZE);
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile memctl8xx_t *memctl = &immap->im_memctl;
+
+ upmconfig (UPMA, (uint *) sdram_table,
+ sizeof (sdram_table) / sizeof (uint));
+
+ memctl->memc_mamr = CFG_MAMR & (~(MAMR_PTAE)); /* no refresh yet */
+ memctl->memc_mbmr = MBMR_GPL_B4DIS; /* should this be mamr? - NTL */
+ memctl->memc_mptpr = MPTPR_PTP_DIV64;
+ memctl->memc_mar = 0x00008800;
+
+ /*
+ * Map controller SDRAM bank 0
+ */
+ memctl->memc_or1 = CFG_OR1_PRELIM;
+ memctl->memc_br1 = CFG_BR1_PRELIM;
+ udelay (200);
+
+ /*
+ * Map controller SDRAM bank 1
+ */
+ memctl->memc_or2 = CFG_OR2;
+ memctl->memc_br2 = CFG_BR2;
+
+ /*
+ * Perform SDRAM initializsation sequence
+ */
+ memctl->memc_mcr = 0x80002105; /* SDRAM bank 0 */
+ udelay (1);
+ memctl->memc_mcr = 0x80002730; /* SDRAM bank 0 - execute twice */
+ udelay (1);
+ memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */
+
+ udelay (10000);
+
+ /* leave place for framebuffers */
+ return (SDRAM_MAX_SIZE - SDRAM_RES_SIZE);
}
/* ------------------------------------------------------------------------- */
static void video_circle (char *center, int radius, int color, int pitch)
{
- int x,y,d,dE,dSE;
-
- x = 0;
- y = radius;
- d = 1-radius;
- dE = 3;
- dSE = -2*radius+5;
-
- *(center+x+y*pitch) = color;
- *(center+y+x*pitch) = color;
- *(center+y-x*pitch) = color;
- *(center+x-y*pitch) = color;
- *(center-x-y*pitch) = color;
- *(center-y-x*pitch) = color;
- *(center-y+x*pitch) = color;
- *(center-x+y*pitch) = color;
- while(y>x)
- {
- if (d<0)
- {
- d += dE;
- dE += 2;
- dSE += 2;
- x++;
+ int x, y, d, dE, dSE;
+
+ x = 0;
+ y = radius;
+ d = 1 - radius;
+ dE = 3;
+ dSE = -2 * radius + 5;
+
+ *(center + x + y * pitch) = color;
+ *(center + y + x * pitch) = color;
+ *(center + y - x * pitch) = color;
+ *(center + x - y * pitch) = color;
+ *(center - x - y * pitch) = color;
+ *(center - y - x * pitch) = color;
+ *(center - y + x * pitch) = color;
+ *(center - x + y * pitch) = color;
+ while (y > x) {
+ if (d < 0) {
+ d += dE;
+ dE += 2;
+ dSE += 2;
+ x++;
+ } else {
+ d += dSE;
+ dE += 2;
+ dSE += 4;
+ x++;
+ y--;
+ }
+ *(center + x + y * pitch) = color;
+ *(center + y + x * pitch) = color;
+ *(center + y - x * pitch) = color;
+ *(center + x - y * pitch) = color;
+ *(center - x - y * pitch) = color;
+ *(center - y - x * pitch) = color;
+ *(center - y + x * pitch) = color;
+ *(center - x + y * pitch) = color;
}
- else
- {
- d += dSE;
- dE += 2;
- dSE += 4;
- x++;
- y--;
- }
- *(center+x+y*pitch) = color;
- *(center+y+x*pitch) = color;
- *(center+y-x*pitch) = color;
- *(center+x-y*pitch) = color;
- *(center-x-y*pitch) = color;
- *(center-y-x*pitch) = color;
- *(center-y+x*pitch) = color;
- *(center-x+y*pitch) = color;
- }
}
/* ------------------------------------------------------------------------- */
-static void video_test_image(void)
+static void video_test_image (void)
{
- char *di;
- int i, n;
-
- /* draw raster */
- for (i=0; i<LCD_VIDEO_ROWS; i+=32)
- {
- memset((char*)(LCD_VIDEO_ADDR+i*LCD_VIDEO_COLS), LCD_VIDEO_FG, LCD_VIDEO_COLS);
- for (n=i+1;n<i+32;n++)
- memset((char*)(LCD_VIDEO_ADDR+n*LCD_VIDEO_COLS), LCD_VIDEO_BG, LCD_VIDEO_COLS);
- }
-
- for (i=0; i<LCD_VIDEO_COLS; i+=32)
- {
- for (n=0; n<LCD_VIDEO_ROWS; n++)
- *(char*)(LCD_VIDEO_ADDR+n*LCD_VIDEO_COLS+i) = LCD_VIDEO_FG;
- }
-
- /* draw gray bar */
- di = (char *)(LCD_VIDEO_ADDR + (LCD_VIDEO_COLS-256)/64*32 + 97*LCD_VIDEO_COLS);
- for (n=0; n<63; n++)
- {
- for (i=0; i<256; i++)
- {
- *di++ = (char)i;
- *(di+LCD_VIDEO_COLS*64) = (i&1)*255;
+ char *di;
+ int i, n;
+
+ /* draw raster */
+ for (i = 0; i < LCD_VIDEO_ROWS; i += 32) {
+ memset ((char *) (LCD_VIDEO_ADDR + i * LCD_VIDEO_COLS),
+ LCD_VIDEO_FG, LCD_VIDEO_COLS);
+ for (n = i + 1; n < i + 32; n++)
+ memset ((char *) (LCD_VIDEO_ADDR +
+ n * LCD_VIDEO_COLS), LCD_VIDEO_BG,
+ LCD_VIDEO_COLS);
+ }
+
+ for (i = 0; i < LCD_VIDEO_COLS; i += 32) {
+ for (n = 0; n < LCD_VIDEO_ROWS; n++)
+ *(char *) (LCD_VIDEO_ADDR + n * LCD_VIDEO_COLS + i) =
+ LCD_VIDEO_FG;
}
- di += LCD_VIDEO_COLS-256;
- }
- video_circle ((char*)LCD_VIDEO_ADDR+LCD_VIDEO_COLS/2+LCD_VIDEO_ROWS/2*LCD_VIDEO_COLS,
- LCD_VIDEO_ROWS/2,LCD_VIDEO_FG, LCD_VIDEO_COLS);
+ /* draw gray bar */
+ di = (char *) (LCD_VIDEO_ADDR + (LCD_VIDEO_COLS - 256) / 64 * 32 +
+ 97 * LCD_VIDEO_COLS);
+ for (n = 0; n < 63; n++) {
+ for (i = 0; i < 256; i++) {
+ *di++ = (char) i;
+ *(di + LCD_VIDEO_COLS * 64) = (i & 1) * 255;
+ }
+ di += LCD_VIDEO_COLS - 256;
+ }
+
+ video_circle ((char *) LCD_VIDEO_ADDR + LCD_VIDEO_COLS / 2 +
+ LCD_VIDEO_ROWS / 2 * LCD_VIDEO_COLS, LCD_VIDEO_ROWS / 2,
+ LCD_VIDEO_FG, LCD_VIDEO_COLS);
}
/* ------------------------------------------------------------------------- */
static void video_default_lut (unsigned int clut_type)
{
- unsigned int i;
- unsigned char RGB[] =
- {
- 0x00, 0x00, 0x00, /* black */
- 0x80, 0x80, 0x80, /* gray */
- 0xff, 0x00, 0x00, /* red */
- 0x00, 0xff, 0x00, /* green */
- 0x00, 0x00, 0xff, /* blue */
- 0x00, 0xff, 0xff, /* cyan */
- 0xff, 0x00, 0xff, /* magenta */
- 0xff, 0xff, 0x00, /* yellow */
- 0x80, 0x00, 0x00, /* dark red */
- 0x00, 0x80, 0x00, /* dark green */
- 0x00, 0x00, 0x80, /* dark blue */
- 0x00, 0x80, 0x80, /* dark cyan */
- 0x80, 0x00, 0x80, /* dark magenta */
- 0x80, 0x80, 0x00, /* dark yellow */
- 0xc0, 0xc0, 0xc0, /* light gray */
- 0xff, 0xff, 0xff, /* white */
+ unsigned int i;
+ unsigned char RGB[] = {
+ 0x00, 0x00, 0x00, /* black */
+ 0x80, 0x80, 0x80, /* gray */
+ 0xff, 0x00, 0x00, /* red */
+ 0x00, 0xff, 0x00, /* green */
+ 0x00, 0x00, 0xff, /* blue */
+ 0x00, 0xff, 0xff, /* cyan */
+ 0xff, 0x00, 0xff, /* magenta */
+ 0xff, 0xff, 0x00, /* yellow */
+ 0x80, 0x00, 0x00, /* dark red */
+ 0x00, 0x80, 0x00, /* dark green */
+ 0x00, 0x00, 0x80, /* dark blue */
+ 0x00, 0x80, 0x80, /* dark cyan */
+ 0x80, 0x00, 0x80, /* dark magenta */
+ 0x80, 0x80, 0x00, /* dark yellow */
+ 0xc0, 0xc0, 0xc0, /* light gray */
+ 0xff, 0xff, 0xff, /* white */
};
- switch (clut_type)
- {
- case 1:
- for (i=0; i<240; i++)
- video_set_lut (i, i, i, i);
- for (i=0; i<16; i++)
- video_set_lut (i+240, RGB[i*3], RGB[i*3+1], RGB[i*3+2]);
- break;
- default:
- for (i=0; i<256; i++)
- video_set_lut (i, i, i, i);
- }
+ switch (clut_type) {
+ case 1:
+ for (i = 0; i < 240; i++)
+ video_set_lut (i, i, i, i);
+ for (i = 0; i < 16; i++)
+ video_set_lut (i + 240, RGB[i * 3], RGB[i * 3 + 1],
+ RGB[i * 3 + 2]);
+ break;
+ default:
+ for (i = 0; i < 256; i++)
+ video_set_lut (i, i, i, i);
+ }
}
/* ------------------------------------------------------------------------- */
void *video_hw_init (void)
{
- unsigned int clut = 0;
- unsigned char *penv;
- immap_t *immr = (immap_t *) CFG_IMMR;
-
- /* enable video only on CLUT value */
- if ((penv = getenv ("clut")) != NULL)
- clut = (u_int)simple_strtoul (penv, NULL, 10);
- else
- return NULL;
-
- /* disable graphic before write LCD regs. */
- immr->im_lcd.lcd_lccr = 0x96000866;
-
- /* config LCD regs. */
- immr->im_lcd.lcd_lcfaa = LCD_VIDEO_ADDR;
- immr->im_lcd.lcd_lchcr = 0x010a0093;
- immr->im_lcd.lcd_lcvcr = 0x900f0024;
-
- printf ("Video: 640x480 8Bit Index Lut %s\n",
- (clut==1?"240/16 (gray/vga)":"256(gray)"));
-
- video_default_lut (clut);
-
- /* clear framebuffer */
- memset ( (char*)(LCD_VIDEO_ADDR), LCD_VIDEO_BG, LCD_VIDEO_ROWS*LCD_VIDEO_COLS );
-
- /* enable graphic */
- immr->im_lcd.lcd_lccr = 0x96000867;
-
- /* fill in Graphic Device */
- gdev.frameAdrs = LCD_VIDEO_ADDR;
- gdev.winSizeX = LCD_VIDEO_COLS;
- gdev.winSizeY = LCD_VIDEO_ROWS;
- gdev.gdfBytesPP = 1;
- gdev.gdfIndex = GDF__8BIT_INDEX;
-
- if (clut > 1)
- /* return Graphic Device for console */
- return (void *)&gdev;
- else
- /* just graphic enabled - draw something beautiful */
- video_test_image();
-
- return NULL; /* this disabels cfb - console */
+ unsigned int clut = 0;
+ unsigned char *penv;
+ immap_t *immr = (immap_t *) CFG_IMMR;
+
+ /* enable video only on CLUT value */
+ if ((penv = getenv ("clut")) != NULL)
+ clut = (u_int) simple_strtoul (penv, NULL, 10);
+ else
+ return NULL;
+
+ /* disable graphic before write LCD regs. */
+ immr->im_lcd.lcd_lccr = 0x96000866;
+
+ /* config LCD regs. */
+ immr->im_lcd.lcd_lcfaa = LCD_VIDEO_ADDR;
+ immr->im_lcd.lcd_lchcr = 0x010a0093;
+ immr->im_lcd.lcd_lcvcr = 0x900f0024;
+
+ printf ("Video: 640x480 8Bit Index Lut %s\n",
+ (clut == 1 ? "240/16 (gray/vga)" : "256(gray)"));
+
+ video_default_lut (clut);
+
+ /* clear framebuffer */
+ memset ((char *) (LCD_VIDEO_ADDR), LCD_VIDEO_BG,
+ LCD_VIDEO_ROWS * LCD_VIDEO_COLS);
+
+ /* enable graphic */
+ immr->im_lcd.lcd_lccr = 0x96000867;
+
+ /* fill in Graphic Device */
+ gdev.frameAdrs = LCD_VIDEO_ADDR;
+ gdev.winSizeX = LCD_VIDEO_COLS;
+ gdev.winSizeY = LCD_VIDEO_ROWS;
+ gdev.gdfBytesPP = 1;
+ gdev.gdfIndex = GDF__8BIT_INDEX;
+
+ if (clut > 1)
+ /* return Graphic Device for console */
+ return (void *) &gdev;
+ else
+ /* just graphic enabled - draw something beautiful */
+ video_test_image ();
+
+ return NULL; /* this disabels cfb - console */
}
/* ------------------------------------------------------------------------- */
@@ -465,13 +469,15 @@ void *video_hw_init (void)
void video_set_lut (unsigned int index,
unsigned char r, unsigned char g, unsigned char b)
{
- unsigned int lum;
- unsigned short *pLut = (unsigned short *)(CFG_IMMR + 0x0e00);
-
- /* 16 bit lut values, 12 bit used, xxxx BBGG RRii iiii */
- /* y = 0.299*R + 0.587*G + 0.114*B */
- lum = (2990*r + 5870*g + 1140*b)/10000;
- pLut[index] = ((b & 0xc0)<<4) | ((g & 0xc0)<<2) | (r & 0xc0) | (lum & 0x3f);
+ unsigned int lum;
+ unsigned short *pLut = (unsigned short *) (CFG_IMMR + 0x0e00);
+
+ /* 16 bit lut values, 12 bit used, xxxx BBGG RRii iiii */
+ /* y = 0.299*R + 0.587*G + 0.114*B */
+ lum = (2990 * r + 5870 * g + 1140 * b) / 10000;
+ pLut[index] =
+ ((b & 0xc0) << 4) | ((g & 0xc0) << 2) | (r & 0xc0) | (lum &
+ 0x3f);
}
/* ------------------------------------------------------------------------- */