summaryrefslogtreecommitdiff
path: root/board/esg/ima3-mx53/imximage.cfg
diff options
context:
space:
mode:
Diffstat (limited to 'board/esg/ima3-mx53/imximage.cfg')
-rw-r--r--board/esg/ima3-mx53/imximage.cfg108
1 files changed, 108 insertions, 0 deletions
diff --git a/board/esg/ima3-mx53/imximage.cfg b/board/esg/ima3-mx53/imximage.cfg
new file mode 100644
index 0000000..fa6b42d
--- /dev/null
+++ b/board/esg/ima3-mx53/imximage.cfg
@@ -0,0 +1,108 @@
+#
+# (C) Copyright 2012
+# Stefano Babic DENX Software Engineering sbabic@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not write to the Free Software
+# Foundation Inc. 51 Franklin Street Fifth Floor Boston,
+# MA 02110-1301 USA
+#
+# Refer docs/README.imxmage for more details about how-to configure
+# and create imximage boot image
+#
+# The syntax is taken as close as possible with the kwbimage
+
+# image version
+
+IMAGE_VERSION 2
+
+# Boot Device : one of
+# spi, sd (the board has no nand neither onenand)
+
+BOOT_FROM nor
+
+# Device Configuration Data (DCD)
+#
+# Each entry must have the format:
+# Addr-type Address Value
+#
+# where:
+# Addr-type register length (1,2 or 4 bytes)
+# Address absolute address of the register
+# value value to be stored in the register
+
+# IOMUX for RAM only
+DATA 4 0x53fa8554 0x300020
+DATA 4 0x53fa8560 0x300020
+DATA 4 0x53fa8594 0x300020
+DATA 4 0x53fa8584 0x300020
+DATA 4 0x53fa8558 0x300040
+DATA 4 0x53fa8568 0x300040
+DATA 4 0x53fa8590 0x300040
+DATA 4 0x53fa857c 0x300040
+DATA 4 0x53fa8564 0x300040
+DATA 4 0x53fa8580 0x300040
+DATA 4 0x53fa8570 0x300220
+DATA 4 0x53fa8578 0x300220
+DATA 4 0x53fa872c 0x300000
+DATA 4 0x53fa8728 0x300000
+DATA 4 0x53fa871c 0x300000
+DATA 4 0x53fa8718 0x300000
+DATA 4 0x53fa8574 0x300020
+DATA 4 0x53fa8588 0x300020
+DATA 4 0x53fa855c 0x0
+DATA 4 0x53fa858c 0x0
+DATA 4 0x53fa856c 0x300040
+DATA 4 0x53fa86f0 0x300000
+DATA 4 0x53fa8720 0x300000
+DATA 4 0x53fa86fc 0x0
+DATA 4 0x53fa86f4 0x0
+DATA 4 0x53fa8714 0x0
+DATA 4 0x53fa8724 0x4000000
+#
+# DDR RAM
+DATA 4 0x63fd9088 0x40404040
+DATA 4 0x63fd9090 0x40404040
+DATA 4 0x63fd907C 0x01420143
+DATA 4 0x63fd9080 0x01450146
+DATA 4 0x63fd9018 0x00111740
+DATA 4 0x63fd9000 0x84190000
+# esdcfgX
+DATA 4 0x63fd900C 0x9f5152e3
+DATA 4 0x63fd9010 0xb68e8a63
+DATA 4 0x63fd9014 0x01ff00db
+# Read/Write command delay
+DATA 4 0x63fd902c 0x000026d2
+# Out of reset delays
+DATA 4 0x63fd9030 0x00ff0e21
+# ESDCTL ODT timing control
+DATA 4 0x63fd9008 0x12273030
+# ESDCTL power down control
+DATA 4 0x63fd9004 0x0002002d
+# Set registers in DDR memory chips
+DATA 4 0x63fd901c 0x00008032
+DATA 4 0x63fd901c 0x00008033
+DATA 4 0x63fd901c 0x00028031
+DATA 4 0x63fd901c 0x052080b0
+DATA 4 0x63fd901c 0x04008040
+# ESDCTL refresh control
+DATA 4 0x63fd9020 0x00005800
+# PHY ZQ HW control
+DATA 4 0x63fd9040 0x05380003
+# PHY ODT control
+DATA 4 0x63fd9058 0x00022222
+# start DDR3
+DATA 4 0x63fd901c 0x00000000