summaryrefslogtreecommitdiff
path: root/board/freescale
diff options
context:
space:
mode:
Diffstat (limited to 'board/freescale')
-rw-r--r--board/freescale/ls2080a/ls2080a.c6
-rw-r--r--board/freescale/ls2080aqds/MAINTAINERS1
-rw-r--r--board/freescale/ls2080aqds/README13
-rw-r--r--board/freescale/ls2080aqds/eth.c4
-rw-r--r--board/freescale/ls2080aqds/ls2080aqds.c4
5 files changed, 21 insertions, 7 deletions
diff --git a/board/freescale/ls2080a/ls2080a.c b/board/freescale/ls2080a/ls2080a.c
index ecf4bd6..41417e9 100644
--- a/board/freescale/ls2080a/ls2080a.c
+++ b/board/freescale/ls2080a/ls2080a.c
@@ -64,13 +64,13 @@ int board_eth_init(bd_t *bis)
error = smc91111_initialize(0, CONFIG_SMC91111_BASE);
#endif
-#ifdef CONFIG_FSL_MC_ENET
+#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
error = cpu_eth_init(bis);
#endif
return error;
}
-#ifdef CONFIG_FSL_MC_ENET
+#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
void fdt_fixup_board_enet(void *fdt)
{
int offset;
@@ -128,7 +128,7 @@ int ft_board_setup(void *blob, bd_t *bd)
fdt_fixup_memory_banks(blob, base, size, 2);
-#ifdef CONFIG_FSL_MC_ENET
+#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
fdt_fixup_board_enet(blob);
#endif
diff --git a/board/freescale/ls2080aqds/MAINTAINERS b/board/freescale/ls2080aqds/MAINTAINERS
index 79877d7..62c8fac 100644
--- a/board/freescale/ls2080aqds/MAINTAINERS
+++ b/board/freescale/ls2080aqds/MAINTAINERS
@@ -7,6 +7,7 @@ F: include/configs/ls2080aqds.h
F: configs/ls2080aqds_defconfig
F: configs/ls2080aqds_nand_defconfig
F: configs/ls2080aqds_qspi_defconfig
+F: configs/ls2080aqds_sdcard_defconfig
LS2080A_SECURE_BOOT BOARD
M: Saksham Jain <saksham.jain@nxp.freescale.com>
diff --git a/board/freescale/ls2080aqds/README b/board/freescale/ls2080aqds/README
index cad860e..8e31e9e 100644
--- a/board/freescale/ls2080aqds/README
+++ b/board/freescale/ls2080aqds/README
@@ -102,6 +102,19 @@ DPAA2 DPL 0x00D00000
DPAA2 DPC 0x00E00000
Kernel.itb 0x01000000
+Memory map for SD boot
+-------------------------
+Image Flash Offset SD Card
+ Start Block No.
+RCW+PBI 0x00000000 0x00008
+Boot firmware (U-Boot) 0x00100000 0x00800
+Boot firmware Environment 0x00300000 0x01800
+PPA firmware 0x00400000 0x02000
+DPAA2 MC 0x00A00000 0x05000
+DPAA2 DPL 0x00D00000 0x06800
+DPAA2 DPC 0x00E00000 0x07000
+Kernel.itb 0x01000000 0x08000
+
Environment Variables
---------------------
- mcboottimeout: MC boot timeout in milliseconds. If this variable is not defined
diff --git a/board/freescale/ls2080aqds/eth.c b/board/freescale/ls2080aqds/eth.c
index 8c44aac..defcac5 100644
--- a/board/freescale/ls2080aqds/eth.c
+++ b/board/freescale/ls2080aqds/eth.c
@@ -23,7 +23,7 @@
#define MC_BOOT_ENV_VAR "mcinitcmd"
-#ifdef CONFIG_FSL_MC_ENET
+#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
/* - In LS2080A there are only 16 SERDES lanes, spread across 2 SERDES banks.
* Bank 1 -> Lanes A, B, C, D, E, F, G, H
* Bank 2 -> Lanes A,B, C, D, E, F, G, H
@@ -835,7 +835,7 @@ void ls2080a_handle_phy_interface_xsgmii(int i)
int board_eth_init(bd_t *bis)
{
int error;
-#ifdef CONFIG_FSL_MC_ENET
+#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
int serdes1_prtcl = (in_le32(&gur->rcwsr[28]) &
FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_MASK)
diff --git a/board/freescale/ls2080aqds/ls2080aqds.c b/board/freescale/ls2080aqds/ls2080aqds.c
index 6da9c6c..f36fb98 100644
--- a/board/freescale/ls2080aqds/ls2080aqds.c
+++ b/board/freescale/ls2080aqds/ls2080aqds.c
@@ -280,7 +280,7 @@ int arch_misc_init(void)
}
#endif
-#ifdef CONFIG_FSL_MC_ENET
+#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
void fdt_fixup_board_enet(void *fdt)
{
int offset;
@@ -336,7 +336,7 @@ int ft_board_setup(void *blob, bd_t *bd)
fsl_fdt_fixup_dr_usb(blob, bd);
-#ifdef CONFIG_FSL_MC_ENET
+#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
fdt_fixup_board_enet(blob);
#endif