summaryrefslogtreecommitdiff
path: root/board/kup/kup4k/kup4k.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/kup/kup4k/kup4k.c')
-rw-r--r--board/kup/kup4k/kup4k.c458
1 files changed, 458 insertions, 0 deletions
diff --git a/board/kup/kup4k/kup4k.c b/board/kup/kup4k/kup4k.c
new file mode 100644
index 0000000..8bed3d5
--- /dev/null
+++ b/board/kup/kup4k/kup4k.c
@@ -0,0 +1,458 @@
+/*
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ * Klaus Heydeck, Kieback & Peter GmbH & Co KG, heydeck@kieback-peter.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc8xx.h>
+#include "../common/kup.h"
+#ifdef CONFIG_KUP4K_LOGO
+ #include "s1d13706.h"
+#endif
+
+#undef DEBUG
+#ifdef DEBUG
+# define debugk(fmt,args...) printf(fmt ,##args)
+#else
+# define debugk(fmt,args...)
+#endif
+
+typedef struct {
+ volatile unsigned char *VmemAddr;
+ volatile unsigned char *RegAddr;
+} FB_INFO_S1D13xxx;
+
+
+/* ------------------------------------------------------------------------- */
+
+#if 0
+static long int dram_size (long int, long int *, long int);
+#endif
+
+#ifdef CONFIG_KUP4K_LOGO
+void lcd_logo(bd_t *bd);
+#endif
+
+
+/* ------------------------------------------------------------------------- */
+
+#define _NOT_USED_ 0xFFFFFFFF
+
+const uint sdram_table[] = {
+ /*
+ * Single Read. (Offset 0 in UPMA RAM)
+ */
+ 0x1F07FC04, 0xEEAEFC04, 0x11ADFC04, 0xEFBBBC00,
+ 0x1FF77C47, /* last */
+
+ /*
+ * SDRAM Initialization (offset 5 in UPMA RAM)
+ *
+ * This is no UPM entry point. The following definition uses
+ * the remaining space to establish an initialization
+ * sequence, which is executed by a RUN command.
+ *
+ */
+ 0x1FF77C35, 0xEFEABC34, 0x1FB57C35, /* last */
+
+ /*
+ * Burst Read. (Offset 8 in UPMA RAM)
+ */
+ 0x1F07FC04, 0xEEAEFC04, 0x10ADFC04, 0xF0AFFC00,
+ 0xF0AFFC00, 0xF1AFFC00, 0xEFBBBC00, 0x1FF77C47, /* last */
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+
+ /*
+ * Single Write. (Offset 18 in UPMA RAM)
+ */
+ 0x1F27FC04, 0xEEAEBC00, 0x01B93C04, 0x1FF77C47, /* last */
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+
+ /*
+ * Burst Write. (Offset 20 in UPMA RAM)
+ */
+ 0x1F07FC04, 0xEEAEBC00, 0x10AD7C00, 0xF0AFFC00,
+ 0xF0AFFC00, 0xE1BBBC04, 0x1FF77C47, /* last */
+ _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+
+ /*
+ * Refresh (Offset 30 in UPMA RAM)
+ */
+ 0x1FF5FC84, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04,
+ 0xFFFFFC84, 0xFFFFFC07, /* last */
+ _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+
+ /*
+ * Exception. (Offset 3c in UPMA RAM)
+ */
+ 0x7FFFFC07, /* last */
+ _NOT_USED_, _NOT_USED_, _NOT_USED_,
+};
+
+/* ------------------------------------------------------------------------- */
+
+
+/*
+ * Check Board Identity:
+ */
+
+int checkboard (void)
+{
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ uchar *latch,rev,mod;
+
+ /*
+ * Init ChipSelect #4 (CAN + HW-Latch)
+ */
+ immap->im_memctl.memc_or4 = 0xFFFF8926;
+ immap->im_memctl.memc_br4 = 0x90000401;
+
+ latch=(uchar *)0x90000200;
+ rev = (*latch & 0xF8) >> 3;
+ mod=(*latch & 0x03);
+ printf ("Board: KUP4K Rev %d.%d SN: %s\n",rev,mod,getenv("ethaddr"));
+ return (0);
+}
+
+/* ------------------------------------------------------------------------- */
+
+long int initdram (int board_type)
+{
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile memctl8xx_t *memctl = &immap->im_memctl;
+ long int size_b0 = 0;
+ long int size_b1 = 0;
+ long int size_b2 = 0;
+
+ upmconfig (UPMA, (uint *) sdram_table,
+ sizeof (sdram_table) / sizeof (uint));
+
+ /*
+ * Preliminary prescaler for refresh (depends on number of
+ * banks): This value is selected for four cycles every 62.4 us
+ * with two SDRAM banks or four cycles every 31.2 us with one
+ * bank. It will be adjusted after memory sizing.
+ */
+ memctl->memc_mptpr = CFG_MPTPR;
+
+ memctl->memc_mar = 0x00000088;
+
+ /*
+ * Map controller banks 1 and 2 to the SDRAM banks 2 and 3 at
+ * preliminary addresses - these have to be modified after the
+ * SDRAM size has been determined.
+ */
+/* memctl->memc_or1 = CFG_OR1_PRELIM; */
+/* memctl->memc_br1 = CFG_BR1_PRELIM; */
+
+/* memctl->memc_or2 = CFG_OR2_PRELIM; */
+/* memctl->memc_br2 = CFG_BR2_PRELIM; */
+
+
+ memctl->memc_mamr = CFG_MAMR & (~(MAMR_PTAE)); /* no refresh yet */
+
+ udelay (200);
+
+ /* perform SDRAM initializsation sequence */
+
+ memctl->memc_mcr = 0x80002105; /* SDRAM bank 0 */
+ udelay (1);
+ memctl->memc_mcr = 0x80002830; /* SDRAM bank 0 - execute twice */
+ udelay (1);
+ memctl->memc_mcr = 0x80002106; /* SDRAM bank 0 - RUN MRS Pattern from loc 6 */
+ udelay (1);
+
+ memctl->memc_mcr = 0x80004105; /* SDRAM bank 1 */
+ udelay (1);
+ memctl->memc_mcr = 0x80004830; /* SDRAM bank 1 - execute twice */
+ udelay (1);
+ memctl->memc_mcr = 0x80004106; /* SDRAM bank 1 - RUN MRS Pattern from loc 6 */
+ udelay (1);
+
+ memctl->memc_mcr = 0x80006105; /* SDRAM bank 2 */
+ udelay (1);
+ memctl->memc_mcr = 0x80006830; /* SDRAM bank 2 - execute twice */
+ udelay (1);
+ memctl->memc_mcr = 0x80006106; /* SDRAM bank 2 - RUN MRS Pattern from loc 6 */
+ udelay (1);
+
+ memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */
+ udelay (1000);
+
+#if 0 /* 3 x 8MB */
+ size_b0 = 0x00800000;
+ size_b1 = 0x00800000;
+ size_b2 = 0x00800000;
+ memctl->memc_mptpr = CFG_MPTPR;
+ udelay (1000);
+ memctl->memc_or1 = 0xFF800A00;
+ memctl->memc_br1 = 0x00000081;
+ memctl->memc_or2 = 0xFF000A00;
+ memctl->memc_br2 = 0x00800081;
+ memctl->memc_or3 = 0xFE000A00;
+ memctl->memc_br3 = 0x01000081;
+#else /* 3 x 16 MB */
+ size_b0 = 0x01000000;
+ size_b1 = 0x01000000;
+ size_b2 = 0x01000000;
+ memctl->memc_mptpr = CFG_MPTPR;
+ udelay (1000);
+ memctl->memc_or1 = 0xFF000A00;
+ memctl->memc_br1 = 0x00000081;
+ memctl->memc_or2 = 0xFE000A00;
+ memctl->memc_br2 = 0x01000081;
+ memctl->memc_or3 = 0xFC000A00;
+ memctl->memc_br3 = 0x02000081;
+#endif
+
+ udelay (10000);
+
+ return (size_b0 + size_b1 + size_b2);
+}
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Check memory range for valid RAM. A simple memory test determines
+ * the actually available RAM size between addresses `base' and
+ * `base + maxsize'. Some (not all) hardware errors are detected:
+ * - short between address lines
+ * - short between data lines
+ */
+#if 0
+static long int dram_size (long int mamr_value, long int *base,
+ long int maxsize)
+{
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile memctl8xx_t *memctl = &immap->im_memctl;
+ volatile long int *addr;
+ ulong cnt, val;
+ ulong save[32]; /* to make test non-destructive */
+ unsigned char i = 0;
+
+ memctl->memc_mamr = mamr_value;
+
+ for (cnt = maxsize / sizeof (long); cnt > 0; cnt >>= 1) {
+ addr = base + cnt; /* pointer arith! */
+
+ save[i++] = *addr;
+ *addr = ~cnt;
+ }
+
+ /* write 0 to base address */
+ addr = base;
+ save[i] = *addr;
+ *addr = 0;
+
+ /* check at base address */
+ if ((val = *addr) != 0) {
+ *addr = save[i];
+ return (0);
+ }
+
+ for (cnt = 1; cnt <= maxsize / sizeof (long); cnt <<= 1) {
+ addr = base + cnt; /* pointer arith! */
+
+ val = *addr;
+ *addr = save[--i];
+
+ if (val != (~cnt)) {
+ return (cnt * sizeof (long));
+ }
+ }
+ return (maxsize);
+}
+#endif
+
+int misc_init_r (void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_STATUS_LED
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
+#endif
+#ifdef CONFIG_KUP4K_LOGO
+ bd_t *bd = gd->bd;
+
+ lcd_logo (bd);
+#endif /* CONFIG_KUP4K_LOGO */
+#ifdef CONFIG_IDE_LED
+ /* Configure PA8 as output port */
+ immap->im_ioport.iop_padir |= 0x80;
+ immap->im_ioport.iop_paodr |= 0x80;
+ immap->im_ioport.iop_papar &= ~0x80;
+ immap->im_ioport.iop_padat |= 0x80; /* turn it off */
+#endif
+ setenv("hw","4k");
+ poweron_key();
+ return (0);
+}
+
+#ifdef CONFIG_KUP4K_LOGO
+
+
+void lcd_logo (bd_t * bd)
+{
+ FB_INFO_S1D13xxx fb_info;
+ S1D_INDEX s1dReg;
+ S1D_VALUE s1dValue;
+ volatile immap_t *immr = (immap_t *) CFG_IMMR;
+ volatile memctl8xx_t *memctl;
+ ushort i;
+ uchar *fb;
+ int rs, gs, bs;
+ int r = 8, g = 8, b = 4;
+ int r1, g1, b1;
+ int n;
+ uchar tmp[64]; /* long enough for environment variables */
+ int tft = 0;
+
+ immr->im_cpm.cp_pbpar &= ~(PB_LCD_PWM);
+ immr->im_cpm.cp_pbodr &= ~(PB_LCD_PWM);
+ immr->im_cpm.cp_pbdat &= ~(PB_LCD_PWM); /* set to 0 = enabled */
+ immr->im_cpm.cp_pbdir |= (PB_LCD_PWM);
+
+/*----------------------------------------------------------------------------- */
+/* Initialize the chip and the frame buffer driver. */
+/*----------------------------------------------------------------------------- */
+ memctl = &immr->im_memctl;
+
+
+ /*
+ * Init ChipSelect #5 (S1D13768)
+ */
+ memctl->memc_or5 = 0xFFC007F0; /* 4 MB 17 WS or externel TA */
+ memctl->memc_br5 = 0x80080801; /* Start at 0x80080000 */
+
+ fb_info.VmemAddr = (unsigned char *) (S1D_PHYSICAL_VMEM_ADDR);
+ fb_info.RegAddr = (unsigned char *) (S1D_PHYSICAL_REG_ADDR);
+
+ if ((((S1D_VALUE *) fb_info.RegAddr)[0] != 0x28)
+ || (((S1D_VALUE *) fb_info.RegAddr)[1] != 0x14)) {
+ printf ("Warning:LCD Controller S1D13706 not found\n");
+ setenv ("lcd", "none");
+ return;
+ }
+
+
+ for (i = 0; i < sizeof(aS1DRegs_prelimn) / sizeof(aS1DRegs_prelimn[0]); i++) {
+ s1dReg = aS1DRegs_prelimn[i].Index;
+ s1dValue = aS1DRegs_prelimn[i].Value;
+ debugk ("s13768 reg: %02x value: %02x\n",
+ aS1DRegs_prelimn[i].Index, aS1DRegs_prelimn[i].Value);
+ ((S1D_VALUE *) fb_info.RegAddr)[s1dReg / sizeof (S1D_VALUE)] =
+ s1dValue;
+ }
+
+
+ n = getenv_r ("lcd", tmp, sizeof (tmp));
+ if (n > 0) {
+ if (!strcmp ("tft", tmp))
+ tft = 1;
+ else
+ tft = 0;
+ }
+#if 0
+ if (((S1D_VALUE *) fb_info.RegAddr)[0xAC] & 0x04)
+ tft = 0;
+ else
+ tft = 1;
+#endif
+
+ debugk ("Port=0x%02x -> TFT=%d\n", tft,
+ ((S1D_VALUE *) fb_info.RegAddr)[0xAC]);
+
+ /* init controller */
+ if (!tft) {
+ for (i = 0; i < sizeof(aS1DRegs_stn) / sizeof(aS1DRegs_stn[0]); i++) {
+ s1dReg = aS1DRegs_stn[i].Index;
+ s1dValue = aS1DRegs_stn[i].Value;
+ debugk ("s13768 reg: %02x value: %02x\n",
+ aS1DRegs_stn[i].Index,
+ aS1DRegs_stn[i].Value);
+ ((S1D_VALUE *) fb_info.RegAddr)[s1dReg / sizeof(S1D_VALUE)] =
+ s1dValue;
+ }
+ n = getenv_r ("contrast", tmp, sizeof (tmp));
+ ((S1D_VALUE *) fb_info.RegAddr)[0xB3] =
+ (n > 0) ? (uchar) simple_strtoul (tmp, NULL, 10) * 255 / 100 : 0xA0;
+ switch (bd->bi_busfreq) {
+ case 40000000:
+ ((S1D_VALUE *) fb_info.RegAddr)[0x05] = 0x32;
+ ((S1D_VALUE *) fb_info.RegAddr)[0x12] = 0x41;
+ break;
+ case 48000000:
+ ((S1D_VALUE *) fb_info.RegAddr)[0x05] = 0x22;
+ ((S1D_VALUE *) fb_info.RegAddr)[0x12] = 0x34;
+ break;
+ default:
+ printf ("KUP4K S1D1: unknown busfrequency: %ld assuming 64 MHz\n", bd->bi_busfreq);
+ case 64000000:
+ ((S1D_VALUE *) fb_info.RegAddr)[0x05] = 0x32;
+ ((S1D_VALUE *) fb_info.RegAddr)[0x12] = 0x66;
+ break;
+ }
+ /* setenv("lcd","stn"); */
+ } else {
+ for (i = 0; i < sizeof(aS1DRegs_tft) / sizeof(aS1DRegs_tft[0]); i++) {
+ s1dReg = aS1DRegs_tft[i].Index;
+ s1dValue = aS1DRegs_tft[i].Value;
+ debugk ("s13768 reg: %02x value: %02x\n",
+ aS1DRegs_tft[i].Index,
+ aS1DRegs_tft[i].Value);
+ ((S1D_VALUE *) fb_info.RegAddr)[s1dReg / sizeof (S1D_VALUE)] =
+ s1dValue;
+ }
+
+ switch (bd->bi_busfreq) {
+ default:
+ printf ("KUP4K S1D1: unknown busfrequency: %ld assuming 64 MHz\n", bd->bi_busfreq);
+ case 40000000:
+ ((S1D_VALUE *) fb_info.RegAddr)[0x05] = 0x42;
+ ((S1D_VALUE *) fb_info.RegAddr)[0x12] = 0x30;
+ break;
+ }
+ /* setenv("lcd","tft"); */
+ }
+
+ /* create and set colormap */
+ rs = 256 / (r - 1);
+ gs = 256 / (g - 1);
+ bs = 256 / (b - 1);
+ for (i = 0; i < 256; i++) {
+ r1 = (rs * ((i / (g * b)) % r)) * 255;
+ g1 = (gs * ((i / b) % g)) * 255;
+ b1 = (bs * ((i) % b)) * 255;
+ debugk ("%d %04x %04x %04x\n", i, r1 >> 4, g1 >> 4, b1 >> 4);
+ S1D_WRITE_PALETTE (fb_info.RegAddr, i, (r1 >> 4), (g1 >> 4),
+ (b1 >> 4));
+ }
+
+ /* copy bitmap */
+ fb = (char *) (fb_info.VmemAddr);
+ memcpy (fb, (uchar *) CONFIG_KUP4K_LOGO, 320 * 240);
+}
+#endif /* CONFIG_KUP4K_LOGO */