diff options
Diffstat (limited to 'board/samsung/smdk5250/dmc_init_ddr3.c')
-rw-r--r-- | board/samsung/smdk5250/dmc_init_ddr3.c | 228 |
1 files changed, 0 insertions, 228 deletions
diff --git a/board/samsung/smdk5250/dmc_init_ddr3.c b/board/samsung/smdk5250/dmc_init_ddr3.c deleted file mode 100644 index e050790..0000000 --- a/board/samsung/smdk5250/dmc_init_ddr3.c +++ /dev/null @@ -1,228 +0,0 @@ -/* - * DDR3 mem setup file for SMDK5250 board based on EXYNOS5 - * - * Copyright (C) 2012 Samsung Electronics - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <config.h> -#include <asm/io.h> -#include <asm/arch/clock.h> -#include <asm/arch/cpu.h> -#include <asm/arch/dmc.h> -#include "setup.h" -#include "clock_init.h" - -#define RDLVL_COMPLETE_TIMEOUT 10000 - -static void reset_phy_ctrl(void) -{ - struct exynos5_clock *clk = (struct exynos5_clock *)EXYNOS5_CLOCK_BASE; - - writel(DDR3PHY_CTRL_PHY_RESET_OFF, &clk->lpddr3phy_ctrl); - writel(DDR3PHY_CTRL_PHY_RESET, &clk->lpddr3phy_ctrl); -} - -int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size) -{ - unsigned int val; - struct exynos5_phy_control *phy0_ctrl, *phy1_ctrl; - struct exynos5_dmc *dmc; - int i; - - phy0_ctrl = (struct exynos5_phy_control *)EXYNOS5_DMC_PHY0_BASE; - phy1_ctrl = (struct exynos5_phy_control *)EXYNOS5_DMC_PHY1_BASE; - dmc = (struct exynos5_dmc *)EXYNOS5_DMC_CTRL_BASE; - - reset_phy_ctrl(); - - /* Set Impedance Output Driver */ - val = (mem->impedance << CA_CK_DRVR_DS_OFFSET) | - (mem->impedance << CA_CKE_DRVR_DS_OFFSET) | - (mem->impedance << CA_CS_DRVR_DS_OFFSET) | - (mem->impedance << CA_ADR_DRVR_DS_OFFSET); - writel(val, &phy0_ctrl->phy_con39); - writel(val, &phy1_ctrl->phy_con39); - - /* Set Read Latency and Burst Length for PHY0 and PHY1 */ - val = (mem->ctrl_bstlen << PHY_CON42_CTRL_BSTLEN_SHIFT) | - (mem->ctrl_rdlat << PHY_CON42_CTRL_RDLAT_SHIFT); - writel(val, &phy0_ctrl->phy_con42); - writel(val, &phy1_ctrl->phy_con42); - - /* ZQ Calibration */ - if (dmc_config_zq(mem, phy0_ctrl, phy1_ctrl)) - return SETUP_ERR_ZQ_CALIBRATION_FAILURE; - - /* DQ Signal */ - writel(mem->phy0_pulld_dqs, &phy0_ctrl->phy_con14); - writel(mem->phy1_pulld_dqs, &phy1_ctrl->phy_con14); - - writel(mem->concontrol | (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT) - | (mem->dfi_init_start << CONCONTROL_DFI_INIT_START_SHIFT), - &dmc->concontrol); - - update_reset_dll(dmc, DDR_MODE_DDR3); - - /* DQS Signal */ - writel(mem->phy0_dqs, &phy0_ctrl->phy_con4); - writel(mem->phy1_dqs, &phy1_ctrl->phy_con4); - - writel(mem->phy0_dq, &phy0_ctrl->phy_con6); - writel(mem->phy1_dq, &phy1_ctrl->phy_con6); - - writel(mem->phy0_tFS, &phy0_ctrl->phy_con10); - writel(mem->phy1_tFS, &phy1_ctrl->phy_con10); - - val = (mem->ctrl_start_point << PHY_CON12_CTRL_START_POINT_SHIFT) | - (mem->ctrl_inc << PHY_CON12_CTRL_INC_SHIFT) | - (mem->ctrl_dll_on << PHY_CON12_CTRL_DLL_ON_SHIFT) | - (mem->ctrl_ref << PHY_CON12_CTRL_REF_SHIFT); - writel(val, &phy0_ctrl->phy_con12); - writel(val, &phy1_ctrl->phy_con12); - - /* Start DLL locking */ - writel(val | (mem->ctrl_start << PHY_CON12_CTRL_START_SHIFT), - &phy0_ctrl->phy_con12); - writel(val | (mem->ctrl_start << PHY_CON12_CTRL_START_SHIFT), - &phy1_ctrl->phy_con12); - - update_reset_dll(dmc, DDR_MODE_DDR3); - - writel(mem->concontrol | (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT), - &dmc->concontrol); - - /* Memory Channel Inteleaving Size */ - writel(mem->iv_size, &dmc->ivcontrol); - - writel(mem->memconfig, &dmc->memconfig0); - writel(mem->memconfig, &dmc->memconfig1); - writel(mem->membaseconfig0, &dmc->membaseconfig0); - writel(mem->membaseconfig1, &dmc->membaseconfig1); - - /* Precharge Configuration */ - writel(mem->prechconfig_tp_cnt << PRECHCONFIG_TP_CNT_SHIFT, - &dmc->prechconfig); - - /* Power Down mode Configuration */ - writel(mem->dpwrdn_cyc << PWRDNCONFIG_DPWRDN_CYC_SHIFT | - mem->dsref_cyc << PWRDNCONFIG_DSREF_CYC_SHIFT, - &dmc->pwrdnconfig); - - /* TimingRow, TimingData, TimingPower and Timingaref - * values as per Memory AC parameters - */ - writel(mem->timing_ref, &dmc->timingref); - writel(mem->timing_row, &dmc->timingrow); - writel(mem->timing_data, &dmc->timingdata); - writel(mem->timing_power, &dmc->timingpower); - - /* Send PALL command */ - dmc_config_prech(mem, dmc); - - /* Send NOP, MRS and ZQINIT commands */ - dmc_config_mrs(mem, dmc); - - if (mem->gate_leveling_enable) { - val = PHY_CON0_RESET_VAL; - val |= P0_CMD_EN; - writel(val, &phy0_ctrl->phy_con0); - writel(val, &phy1_ctrl->phy_con0); - - val = PHY_CON2_RESET_VAL; - val |= INIT_DESKEW_EN; - writel(val, &phy0_ctrl->phy_con2); - writel(val, &phy1_ctrl->phy_con2); - - val = PHY_CON0_RESET_VAL; - val |= P0_CMD_EN; - val |= BYTE_RDLVL_EN; - writel(val, &phy0_ctrl->phy_con0); - writel(val, &phy1_ctrl->phy_con0); - - val = (mem->ctrl_start_point << - PHY_CON12_CTRL_START_POINT_SHIFT) | - (mem->ctrl_inc << PHY_CON12_CTRL_INC_SHIFT) | - (mem->ctrl_force << PHY_CON12_CTRL_FORCE_SHIFT) | - (mem->ctrl_start << PHY_CON12_CTRL_START_SHIFT) | - (mem->ctrl_ref << PHY_CON12_CTRL_REF_SHIFT); - writel(val, &phy0_ctrl->phy_con12); - writel(val, &phy1_ctrl->phy_con12); - - val = PHY_CON2_RESET_VAL; - val |= INIT_DESKEW_EN; - val |= RDLVL_GATE_EN; - writel(val, &phy0_ctrl->phy_con2); - writel(val, &phy1_ctrl->phy_con2); - - val = PHY_CON0_RESET_VAL; - val |= P0_CMD_EN; - val |= BYTE_RDLVL_EN; - val |= CTRL_SHGATE; - writel(val, &phy0_ctrl->phy_con0); - writel(val, &phy1_ctrl->phy_con0); - - val = PHY_CON1_RESET_VAL; - val &= ~(CTRL_GATEDURADJ_MASK); - writel(val, &phy0_ctrl->phy_con1); - writel(val, &phy1_ctrl->phy_con1); - - writel(CTRL_RDLVL_GATE_ENABLE, &dmc->rdlvl_config); - i = RDLVL_COMPLETE_TIMEOUT; - while ((readl(&dmc->phystatus) & - (RDLVL_COMPLETE_CHO | RDLVL_COMPLETE_CH1)) != - (RDLVL_COMPLETE_CHO | RDLVL_COMPLETE_CH1) && i > 0) { - /* - * TODO(waihong): Comment on how long this take to - * timeout - */ - sdelay(100); - i--; - } - if (!i) - return SETUP_ERR_RDLV_COMPLETE_TIMEOUT; - writel(CTRL_RDLVL_GATE_DISABLE, &dmc->rdlvl_config); - - writel(0, &phy0_ctrl->phy_con14); - writel(0, &phy1_ctrl->phy_con14); - - val = (mem->ctrl_start_point << - PHY_CON12_CTRL_START_POINT_SHIFT) | - (mem->ctrl_inc << PHY_CON12_CTRL_INC_SHIFT) | - (mem->ctrl_force << PHY_CON12_CTRL_FORCE_SHIFT) | - (mem->ctrl_start << PHY_CON12_CTRL_START_SHIFT) | - (mem->ctrl_dll_on << PHY_CON12_CTRL_DLL_ON_SHIFT) | - (mem->ctrl_ref << PHY_CON12_CTRL_REF_SHIFT); - writel(val, &phy0_ctrl->phy_con12); - writel(val, &phy1_ctrl->phy_con12); - - update_reset_dll(dmc, DDR_MODE_DDR3); - } - - /* Send PALL command */ - dmc_config_prech(mem, dmc); - - writel(mem->memcontrol, &dmc->memcontrol); - - /* Set DMC Concontrol and enable auto-refresh counter */ - writel(mem->concontrol | (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT) - | (mem->aref_en << CONCONTROL_AREF_EN_SHIFT), &dmc->concontrol); - return 0; -} |