summaryrefslogtreecommitdiff
path: root/board/w7o
diff options
context:
space:
mode:
Diffstat (limited to 'board/w7o')
-rw-r--r--board/w7o/cmd_vpd.c7
-rw-r--r--board/w7o/config.mk1
-rw-r--r--board/w7o/errors.h1
-rw-r--r--board/w7o/flash.c847
-rw-r--r--board/w7o/fpga.c173
-rw-r--r--board/w7o/fsboot.c4
-rw-r--r--board/w7o/init.S1
-rw-r--r--board/w7o/post1.S81
-rw-r--r--board/w7o/post2.c1
-rw-r--r--board/w7o/u-boot.lds5
-rw-r--r--board/w7o/u-boot.lds.debug6
-rw-r--r--board/w7o/vpd.c1
-rw-r--r--board/w7o/vpd.h3
-rw-r--r--board/w7o/w7o.c2
-rw-r--r--board/w7o/w7o.h1
-rw-r--r--board/w7o/watchdog.c1
16 files changed, 569 insertions, 566 deletions
diff --git a/board/w7o/cmd_vpd.c b/board/w7o/cmd_vpd.c
index 3025699..2763a53 100644
--- a/board/w7o/cmd_vpd.c
+++ b/board/w7o/cmd_vpd.c
@@ -57,4 +57,11 @@ int do_vpd (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
return 1;
}
+cmd_tbl_t U_BOOT_CMD(vpd) = MK_CMD_ENTRY(
+ "vpd", 2, 1, do_vpd,
+ "vpd - Read Vital Product Data\n",
+ "[dev_addr]\n"
+ " - Read VPD Data from default address, or device address 'dev_addr'.\n"
+);
+
#endif /* (CONFIG_COMMANDS & CFG_CMD_BSP) */
diff --git a/board/w7o/config.mk b/board/w7o/config.mk
index c73329e..bc341ca 100644
--- a/board/w7o/config.mk
+++ b/board/w7o/config.mk
@@ -29,4 +29,3 @@
TEXT_BASE = 0xFFFC0000
#PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(BOARD)
-
diff --git a/board/w7o/errors.h b/board/w7o/errors.h
index d1e5caf..05b4eae 100644
--- a/board/w7o/errors.h
+++ b/board/w7o/errors.h
@@ -95,4 +95,3 @@ Debugging suggestions:
(13) SDRAM address shorted or unconnected, check sdram caps
*/
#endif /* _ERRORS_H_ */
-
diff --git a/board/w7o/flash.c b/board/w7o/flash.c
index 5651e1c..d6ea635 100644
--- a/board/w7o/flash.c
+++ b/board/w7o/flash.c
@@ -50,21 +50,21 @@ unsigned long flash_init (void)
/* Init: no FLASHes known */
for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
- flash_info[i].flash_id = FLASH_UNKNOWN;
+ flash_info[i].flash_id = FLASH_UNKNOWN;
}
/* Get Size of Boot and Main Flashes */
size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
if (flash_info[0].flash_id == FLASH_UNKNOWN) {
- printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
- size_b0, size_b0<<20);
- return 0;
+ printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+ size_b0, size_b0<<20);
+ return 0;
}
size_b1 = flash_get_size((vu_long *)FLASH_BASE1_PRELIM, &flash_info[1]);
if (flash_info[1].flash_id == FLASH_UNKNOWN) {
- printf ("## Unknown FLASH on Bank 1 - Size = 0x%08lx = %ld MB\n",
- size_b1, size_b1<<20);
- return 0;
+ printf ("## Unknown FLASH on Bank 1 - Size = 0x%08lx = %ld MB\n",
+ size_b1, size_b1<<20);
+ return 0;
}
/* Calculate base addresses */
@@ -83,21 +83,21 @@ unsigned long flash_init (void)
/* Monitor protection ON by default */
(void)flash_protect(FLAG_PROTECT_SET,
- base_b0 + size_b0 - monitor_flash_len,
- base_b0 + size_b0 - 1,
- &flash_info[0]);
+ base_b0 + size_b0 - monitor_flash_len,
+ base_b0 + size_b0 - 1,
+ &flash_info[0]);
/* Protect the FPGA image */
(void)flash_protect(FLAG_PROTECT_SET,
- FLASH_BASE1_PRELIM,
- FLASH_BASE1_PRELIM + CFG_FPGA_IMAGE_LEN - 1,
- &flash_info[1]);
+ FLASH_BASE1_PRELIM,
+ FLASH_BASE1_PRELIM + CFG_FPGA_IMAGE_LEN - 1,
+ &flash_info[1]);
/* Protect the default boot image */
(void)flash_protect(FLAG_PROTECT_SET,
- FLASH_BASE1_PRELIM + CFG_FPGA_IMAGE_LEN,
- FLASH_BASE1_PRELIM + CFG_FPGA_IMAGE_LEN + 0x600000 - 1,
- &flash_info[1]);
+ FLASH_BASE1_PRELIM + CFG_FPGA_IMAGE_LEN,
+ FLASH_BASE1_PRELIM + CFG_FPGA_IMAGE_LEN + 0x600000 - 1,
+ &flash_info[1]);
/* Setup offsets for Main Flash */
flash_get_offsets (FLASH_BASE1_PRELIM, &flash_info[1]);
@@ -113,8 +113,8 @@ static void flash_get_offsets (ulong base, flash_info_t *info)
/* set up sector start address table - FOR BOOT ROM ONLY!!! */
if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) {
- for (i = 0; i < info->sector_count; i++)
- info->start[i] = base + (i * 0x00010000);
+ for (i = 0; i < info->sector_count; i++)
+ info->start[i] = base + (i * 0x00010000);
}
} /* end flash_get_offsets() */
@@ -129,75 +129,75 @@ void flash_print_info (flash_info_t *info)
volatile unsigned long *flash;
if (info->flash_id == FLASH_UNKNOWN) {
- printf ("missing or unknown FLASH type\n");
- return;
+ printf ("missing or unknown FLASH type\n");
+ return;
}
switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_AMD: printf ("1 x AMD "); break;
+ case FLASH_MAN_AMD: printf ("1 x AMD "); break;
case FLASH_MAN_STM: printf ("1 x STM "); break;
- case FLASH_MAN_INTEL: printf ("2 x Intel "); break;
- default: printf ("Unknown Vendor ");
+ case FLASH_MAN_INTEL: printf ("2 x Intel "); break;
+ default: printf ("Unknown Vendor ");
}
switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_AM040:
+ case FLASH_AM040:
if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD)
- printf ("AM29LV040 (4096 Kbit, uniform sector size)\n");
+ printf ("AM29LV040 (4096 Kbit, uniform sector size)\n");
else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_STM)
- printf ("M29W040B (4096 Kbit, uniform block size)\n");
+ printf ("M29W040B (4096 Kbit, uniform block size)\n");
else
- printf ("UNKNOWN 29x040x (4096 Kbit, uniform sector size)\n");
- break;
- case FLASH_28F320J3A:
- printf ("28F320J3A (32 Mbit = 128K x 32)\n");
- break;
- case FLASH_28F640J3A:
- printf ("28F640J3A (64 Mbit = 128K x 64)\n");
- break;
- case FLASH_28F128J3A:
- printf ("28F128J3A (128 Mbit = 128K x 128)\n");
- break;
- default:
- printf ("Unknown Chip Type\n");
+ printf ("UNKNOWN 29x040x (4096 Kbit, uniform sector size)\n");
+ break;
+ case FLASH_28F320J3A:
+ printf ("28F320J3A (32 Mbit = 128K x 32)\n");
+ break;
+ case FLASH_28F640J3A:
+ printf ("28F640J3A (64 Mbit = 128K x 64)\n");
+ break;
+ case FLASH_28F128J3A:
+ printf ("28F128J3A (128 Mbit = 128K x 128)\n");
+ break;
+ default:
+ printf ("Unknown Chip Type\n");
}
if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_STM) {
- printf (" Size: %ld KB in %d Blocks\n",
- info->size >> 10, info->sector_count);
+ printf (" Size: %ld KB in %d Blocks\n",
+ info->size >> 10, info->sector_count);
} else {
- printf (" Size: %ld KB in %d Sectors\n",
- info->size >> 10, info->sector_count);
+ printf (" Size: %ld KB in %d Sectors\n",
+ info->size >> 10, info->sector_count);
}
printf (" Sector Start Addresses:");
for (i=0; i<info->sector_count; ++i) {
- /*
- * Check if whole sector is erased
- */
- if (i != (info->sector_count-1))
- size = info->start[i+1] - info->start[i];
- else
- size = info->start[0] + info->size - info->start[i];
- erased = 1;
- flash = (volatile unsigned long *)info->start[i];
- size = size >> 2; /* divide by 4 for longword access */
- for (k=0; k<size; k++)
- {
- if (*flash++ != 0xffffffff)
- {
- erased = 0;
- break;
- }
- }
-
- if ((i % 5) == 0)
- printf ("\n ");
- printf (" %08lX%s%s",
- info->start[i],
- erased ? " E" : " ",
- info->protect[i] ? "RO " : " "
- );
+ /*
+ * Check if whole sector is erased
+ */
+ if (i != (info->sector_count-1))
+ size = info->start[i+1] - info->start[i];
+ else
+ size = info->start[0] + info->size - info->start[i];
+ erased = 1;
+ flash = (volatile unsigned long *)info->start[i];
+ size = size >> 2; /* divide by 4 for longword access */
+ for (k=0; k<size; k++)
+ {
+ if (*flash++ != 0xffffffff)
+ {
+ erased = 0;
+ break;
+ }
+ }
+
+ if ((i % 5) == 0)
+ printf ("\n ");
+ printf (" %08lX%s%s",
+ info->start[i],
+ erased ? " E" : " ",
+ info->protect[i] ? "RO " : " "
+ );
}
printf ("\n");
} /* end flash_print_info() */
@@ -217,130 +217,130 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info)
/* Test for Boot Flash */
if (base == FLASH_BASE0_PRELIM) {
- unsigned char value;
- volatile unsigned char * addr2 = (unsigned char *)addr;
-
- /* Write auto select command: read Manufacturer ID */
- *(addr2 + 0x555) = 0xaa;
- *(addr2 + 0x2aa) = 0x55;
- *(addr2 + 0x555) = 0x90;
-
- /* Manufacture ID */
- value = *addr2;
- switch (value) {
- case (unsigned char)AMD_MANUFACT:
- info->flash_id = FLASH_MAN_AMD;
- break;
+ unsigned char value;
+ volatile unsigned char * addr2 = (unsigned char *)addr;
+
+ /* Write auto select command: read Manufacturer ID */
+ *(addr2 + 0x555) = 0xaa;
+ *(addr2 + 0x2aa) = 0x55;
+ *(addr2 + 0x555) = 0x90;
+
+ /* Manufacture ID */
+ value = *addr2;
+ switch (value) {
+ case (unsigned char)AMD_MANUFACT:
+ info->flash_id = FLASH_MAN_AMD;
+ break;
case (unsigned char)STM_MANUFACT:
info->flash_id = FLASH_MAN_STM;
break;
- default:
- *addr2 = 0xf0; /* no or unknown flash */
- return 0;
- }
-
- /* Device ID */
- value = *(addr2 + 1);
- switch (value) {
- case (unsigned char)AMD_ID_LV040B:
+ default:
+ *addr2 = 0xf0; /* no or unknown flash */
+ return 0;
+ }
+
+ /* Device ID */
+ value = *(addr2 + 1);
+ switch (value) {
+ case (unsigned char)AMD_ID_LV040B:
case (unsigned char)STM_ID_29W040B:
- info->flash_id += FLASH_AM040;
- info->sector_count = 8;
- info->size = 0x00080000;
- break; /* => 512Kb */
- default:
- *addr2 = 0xf0; /* => no or unknown flash */
- return 0;
- }
+ info->flash_id += FLASH_AM040;
+ info->sector_count = 8;
+ info->size = 0x00080000;
+ break; /* => 512Kb */
+ default:
+ *addr2 = 0xf0; /* => no or unknown flash */
+ return 0;
+ }
}
else { /* MAIN Flash */
- unsigned long value;
- volatile unsigned long * addr2 = (unsigned long *)addr;
-
- /* Write auto select command: read Manufacturer ID */
- *addr2 = 0x90909090;
-
- /* Manufacture ID */
- value = *addr2;
- switch (value) {
- case (unsigned long)INTEL_MANUFACT:
- info->flash_id = FLASH_MAN_INTEL;
- break;
- default:
- *addr2 = 0xff; /* no or unknown flash */
- return 0;
- }
-
- /* Device ID - This shit is interleaved... */
- value = *(addr2 + 1);
- switch (value) {
- case (unsigned long)INTEL_ID_28F320J3A:
- info->flash_id += FLASH_28F320J3A;
- info->sector_count = 32;
- info->size = 0x00400000 * 2;
- break; /* => 2 X 4 MB */
- case (unsigned long)INTEL_ID_28F640J3A:
- info->flash_id += FLASH_28F640J3A;
- info->sector_count = 64;
- info->size = 0x00800000 * 2;
- break; /* => 2 X 8 MB */
- case (unsigned long)INTEL_ID_28F128J3A:
- info->flash_id += FLASH_28F128J3A;
- info->sector_count = 128;
- info->size = 0x01000000 * 2;
- break; /* => 2 X 16 MB */
- default:
- *addr2 = 0xff; /* => no or unknown flash */
- }
+ unsigned long value;
+ volatile unsigned long * addr2 = (unsigned long *)addr;
+
+ /* Write auto select command: read Manufacturer ID */
+ *addr2 = 0x90909090;
+
+ /* Manufacture ID */
+ value = *addr2;
+ switch (value) {
+ case (unsigned long)INTEL_MANUFACT:
+ info->flash_id = FLASH_MAN_INTEL;
+ break;
+ default:
+ *addr2 = 0xff; /* no or unknown flash */
+ return 0;
+ }
+
+ /* Device ID - This shit is interleaved... */
+ value = *(addr2 + 1);
+ switch (value) {
+ case (unsigned long)INTEL_ID_28F320J3A:
+ info->flash_id += FLASH_28F320J3A;
+ info->sector_count = 32;
+ info->size = 0x00400000 * 2;
+ break; /* => 2 X 4 MB */
+ case (unsigned long)INTEL_ID_28F640J3A:
+ info->flash_id += FLASH_28F640J3A;
+ info->sector_count = 64;
+ info->size = 0x00800000 * 2;
+ break; /* => 2 X 8 MB */
+ case (unsigned long)INTEL_ID_28F128J3A:
+ info->flash_id += FLASH_28F128J3A;
+ info->sector_count = 128;
+ info->size = 0x01000000 * 2;
+ break; /* => 2 X 16 MB */
+ default:
+ *addr2 = 0xff; /* => no or unknown flash */
+ }
}
/* Make sure we don't exceed CFG_MAX_FLASH_SECT */
if (info->sector_count > CFG_MAX_FLASH_SECT) {
- printf ("** ERROR: sector count %d > max (%d) **\n",
- info->sector_count, CFG_MAX_FLASH_SECT);
- info->sector_count = CFG_MAX_FLASH_SECT;
+ printf ("** ERROR: sector count %d > max (%d) **\n",
+ info->sector_count, CFG_MAX_FLASH_SECT);
+ info->sector_count = CFG_MAX_FLASH_SECT;
}
/* set up sector start address table */
switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_AM040:
- for (i = 0; i < info->sector_count; i++)
- info->start[i] = base + (i * 0x00010000);
- break;
- case FLASH_28F320J3A:
- case FLASH_28F640J3A:
- case FLASH_28F128J3A:
- for (i = 0; i < info->sector_count; i++)
- info->start[i] = base + (i * 0x00020000 * 2); /* 2 Banks */
- break;
+ case FLASH_AM040:
+ for (i = 0; i < info->sector_count; i++)
+ info->start[i] = base + (i * 0x00010000);
+ break;
+ case FLASH_28F320J3A:
+ case FLASH_28F640J3A:
+ case FLASH_28F128J3A:
+ for (i = 0; i < info->sector_count; i++)
+ info->start[i] = base + (i * 0x00020000 * 2); /* 2 Banks */
+ break;
}
/* Test for Boot Flash */
if (base == FLASH_BASE0_PRELIM) {
- volatile unsigned char *addr2;
- /* check for protected sectors */
- for (i = 0; i < info->sector_count; i++) {
- /* read sector protection at sector address, (AX .. A0) = 0x02 */
- /* D0 = 1 if protected */
- addr2 = (volatile unsigned char *)(info->start[i]);
- info->protect[i] = *(addr2 + 2) & 1;
- }
-
- /* Restore read mode */
- *(unsigned char *)base = 0xF0; /* Reset NORMAL Flash */
+ volatile unsigned char *addr2;
+ /* check for protected sectors */
+ for (i = 0; i < info->sector_count; i++) {
+ /* read sector protection at sector address, (AX .. A0) = 0x02 */
+ /* D0 = 1 if protected */
+ addr2 = (volatile unsigned char *)(info->start[i]);
+ info->protect[i] = *(addr2 + 2) & 1;
+ }
+
+ /* Restore read mode */
+ *(unsigned char *)base = 0xF0; /* Reset NORMAL Flash */
}
else { /* Main Flash */
- volatile unsigned long *addr2;
- /* check for protected sectors */
- for (i = 0; i < info->sector_count; i++) {
- /* read sector protection at sector address, (AX .. A0) = 0x02 */
- /* D0 = 1 if protected */
- addr2 = (volatile unsigned long *)(info->start[i]);
- info->protect[i] = *(addr2 + 2) & 0x1;
- }
+ volatile unsigned long *addr2;
+ /* check for protected sectors */
+ for (i = 0; i < info->sector_count; i++) {
+ /* read sector protection at sector address, (AX .. A0) = 0x02 */
+ /* D0 = 1 if protected */
+ addr2 = (volatile unsigned long *)(info->start[i]);
+ info->protect[i] = *(addr2 + 2) & 0x1;
+ }
- /* Restore read mode */
- *(unsigned long *)base = 0xFFFFFFFF; /* Reset Flash */
+ /* Restore read mode */
+ *(unsigned long *)base = 0xFFFFFFFF; /* Reset Flash */
}
return (info->size);
@@ -357,20 +357,20 @@ static int wait_for_DQ7(ulong addr, uchar cmp_val, ulong tout)
/* Loop X times */
for (i = 1; i <= (100 * tout); i++) { /* Wait up to tout ms */
- udelay(10);
- /* Pause 10 us */
+ udelay(10);
+ /* Pause 10 us */
- /* Check for completion */
- if ((vaddr[0] & 0x80) == (cmp_val & 0x80)) {
- return 0;
- }
+ /* Check for completion */
+ if ((vaddr[0] & 0x80) == (cmp_val & 0x80)) {
+ return 0;
+ }
- /* KEEP THE LUSER HAPPY - Print a dot every 1.1 seconds */
- if (!(i % 110000))
- putc('.');
+ /* KEEP THE LUSER HAPPY - Print a dot every 1.1 seconds */
+ if (!(i % 110000))
+ putc('.');
- /* Kick the dog if needed */
- WATCHDOG_RESET();
+ /* Kick the dog if needed */
+ WATCHDOG_RESET();
}
return 1;
@@ -388,70 +388,70 @@ static int flash_erase8(flash_info_t *info, int s_first, int s_last)
/* Validate arguments */
if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN)
- printf ("- missing\n");
- else
- printf ("- no sectors to erase\n");
- return 1;
+ if (info->flash_id == FLASH_UNKNOWN)
+ printf ("- missing\n");
+ else
+ printf ("- no sectors to erase\n");
+ return 1;
}
/* Check for KNOWN flash type */
if (info->flash_id == FLASH_UNKNOWN) {
- printf ("Can't erase unknown flash type - aborted\n");
- return 1;
+ printf ("Can't erase unknown flash type - aborted\n");
+ return 1;
}
/* Check for protected sectors */
prot = 0;
for (sect = s_first; sect <= s_last; ++sect) {
- if (info->protect[sect])
- prot++;
+ if (info->protect[sect])
+ prot++;
}
if (prot)
- printf ("- Warning: %d protected sectors will not be erased!\n", prot);
+ printf ("- Warning: %d protected sectors will not be erased!\n", prot);
else
- printf ("\n");
+ printf ("\n");
/* Start erase on unprotected sectors */
for (sect = s_first; sect <= s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- sector_addr = (uchar *)(info->start[sect]);
+ if (info->protect[sect] == 0) { /* not protected */
+ sector_addr = (uchar *)(info->start[sect]);
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_STM)
+ if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_STM)
printf("Erasing block %p\n", sector_addr);
else
printf("Erasing sector %p\n", sector_addr);
- /* Disable interrupts which might cause Flash to timeout */
- flag = disable_interrupts();
-
- *(addr + 0x555) = (uchar)0xAA;
- *(addr + 0x2aa) = (uchar)0x55;
- *(addr + 0x555) = (uchar)0x80;
- *(addr + 0x555) = (uchar)0xAA;
- *(addr + 0x2aa) = (uchar)0x55;
- *sector_addr = (uchar)0x30; /* sector erase */
-
- /*
- * Wait for each sector to complete, it's more
- * reliable. According to AMD Spec, you must
- * issue all erase commands within a specified
- * timeout. This has been seen to fail, especially
- * if printf()s are included (for debug)!!
- * Takes up to 6 seconds.
- */
- tcode = wait_for_DQ7((ulong)sector_addr, 0x80, 6000);
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- /* Make sure we didn't timeout */
- if (tcode) {
- printf ("Timeout\n");
- rcode = 1;
- }
- }
+ /* Disable interrupts which might cause Flash to timeout */
+ flag = disable_interrupts();
+
+ *(addr + 0x555) = (uchar)0xAA;
+ *(addr + 0x2aa) = (uchar)0x55;
+ *(addr + 0x555) = (uchar)0x80;
+ *(addr + 0x555) = (uchar)0xAA;
+ *(addr + 0x2aa) = (uchar)0x55;
+ *sector_addr = (uchar)0x30; /* sector erase */
+
+ /*
+ * Wait for each sector to complete, it's more
+ * reliable. According to AMD Spec, you must
+ * issue all erase commands within a specified
+ * timeout. This has been seen to fail, especially
+ * if printf()s are included (for debug)!!
+ * Takes up to 6 seconds.
+ */
+ tcode = wait_for_DQ7((ulong)sector_addr, 0x80, 6000);
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* Make sure we didn't timeout */
+ if (tcode) {
+ printf ("Timeout\n");
+ rcode = 1;
+ }
+ }
}
/* wait at least 80us - let's wait 1 ms */
@@ -473,68 +473,68 @@ static int flash_erase32(flash_info_t *info, int s_first, int s_last)
/* Validate arguments */
if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN)
- printf ("- missing\n");
- else
- printf ("- no sectors to erase\n");
- return 1;
+ if (info->flash_id == FLASH_UNKNOWN)
+ printf ("- missing\n");
+ else
+ printf ("- no sectors to erase\n");
+ return 1;
}
/* Check for KNOWN flash type */
if ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_INTEL) {
- printf ("Can erase only Intel flash types - aborted\n");
- return 1;
+ printf ("Can erase only Intel flash types - aborted\n");
+ return 1;
}
/* Check for protected sectors */
for (sect = s_first; sect <= s_last; ++sect) {
- if (info->protect[sect])
- prot++;
+ if (info->protect[sect])
+ prot++;
}
if (prot)
- printf ("- Warning: %d protected sectors will not be erased!\n", prot);
+ printf ("- Warning: %d protected sectors will not be erased!\n", prot);
else
- printf ("\n");
+ printf ("\n");
start = get_timer (0);
last = start;
/* Start erase on unprotected sectors */
for (sect = s_first; sect <= s_last; sect++) {
- WATCHDOG_RESET();
- if (info->protect[sect] == 0) { /* not protected */
- vu_long *addr = (vu_long *)(info->start[sect]);
- unsigned long status;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- *addr = 0x00500050; /* clear status register */
- *addr = 0x00200020; /* erase setup */
- *addr = 0x00D000D0; /* erase confirm */
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- /* Wait at least 80us - let's wait 1 ms */
- udelay (1000);
-
- while (((status = *addr) & 0x00800080) != 0x00800080) {
- if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
- printf ("Timeout\n");
- *addr = 0x00B000B0; /* suspend erase */
- *addr = 0x00FF00FF; /* reset to read mode */
- return 1;
- }
-
- /* show that we're waiting */
- if ((now - last) > 990) { /* every second */
- putc ('.');
- last = now;
- }
- }
- *addr = 0x00FF00FF; /* reset to read mode */
- }
+ WATCHDOG_RESET();
+ if (info->protect[sect] == 0) { /* not protected */
+ vu_long *addr = (vu_long *)(info->start[sect]);
+ unsigned long status;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ *addr = 0x00500050; /* clear status register */
+ *addr = 0x00200020; /* erase setup */
+ *addr = 0x00D000D0; /* erase confirm */
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* Wait at least 80us - let's wait 1 ms */
+ udelay (1000);
+
+ while (((status = *addr) & 0x00800080) != 0x00800080) {
+ if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ printf ("Timeout\n");
+ *addr = 0x00B000B0; /* suspend erase */
+ *addr = 0x00FF00FF; /* reset to read mode */
+ return 1;
+ }
+
+ /* show that we're waiting */
+ if ((now - last) > 990) { /* every second */
+ putc ('.');
+ last = now;
+ }
+ }
+ *addr = 0x00FF00FF; /* reset to read mode */
+ }
}
printf (" done\n");
return 0;
@@ -543,9 +543,9 @@ static int flash_erase32(flash_info_t *info, int s_first, int s_last)
int flash_erase(flash_info_t *info, int s_first, int s_last)
{
if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040)
- return flash_erase8(info, s_first, s_last);
+ return flash_erase8(info, s_first, s_last);
else
- return flash_erase32(info, s_first, s_last);
+ return flash_erase32(info, s_first, s_last);
} /* end flash_erase() */
/*-----------------------------------------------------------------------
@@ -563,53 +563,53 @@ static int write_buff8(flash_info_t *info, uchar *src, ulong addr, ulong cnt)
start = get_timer (0);
wp = (addr & ~3); /* get lower word
- aligned address */
+ aligned address */
/*
* handle unaligned start bytes
*/
if ((l = addr - wp) != 0) {
- data = 0;
- for (i=0, cp=wp; i<l; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
- for (; i<4 && cnt>0; ++i) {
- data = (data << 8) | *src++;
- --cnt;
- ++cp;
- }
- for (; cnt==0 && i<4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
-
- if ((rc = write_word8(info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
+ data = 0;
+ for (i=0, cp=wp; i<l; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+ for (; i<4 && cnt>0; ++i) {
+ data = (data << 8) | *src++;
+ --cnt;
+ ++cp;
+ }
+ for (; cnt==0 && i<4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ if ((rc = write_word8(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
}
/*
* handle word aligned part
*/
while (cnt >= 4) {
- data = 0;
- for (i=0; i<4; ++i) {
- data = (data << 8) | *src++;
- }
- if ((rc = write_word8(info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- cnt -= 4;
- if (get_timer(start) > 1000) { /* every second */
- WATCHDOG_RESET();
- putc ('.');
- start = get_timer(0);
- }
+ data = 0;
+ for (i=0; i<4; ++i) {
+ data = (data << 8) | *src++;
+ }
+ if ((rc = write_word8(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ cnt -= 4;
+ if (get_timer(start) > 1000) { /* every second */
+ WATCHDOG_RESET();
+ putc ('.');
+ start = get_timer(0);
+ }
}
if (cnt == 0) {
- return (0);
+ return (0);
}
/*
@@ -617,11 +617,11 @@ static int write_buff8(flash_info_t *info, uchar *src, ulong addr, ulong cnt)
*/
data = 0;
for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
- data = (data << 8) | *src++;
- --cnt;
+ data = (data << 8) | *src++;
+ --cnt;
}
for (; i<4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
+ data = (data << 8) | (*(uchar *)cp);
}
return (write_word8(info, wp, data));
@@ -678,7 +678,7 @@ static int write_buff32 (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
}
wp += FLASH_WIDTH;
cnt -= FLASH_WIDTH;
- if (get_timer(start) > 990) { /* every second */
+ if (get_timer(start) > 990) { /* every second */
putc ('.');
start = get_timer(0);
}
@@ -708,9 +708,9 @@ int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt)
int retval;
if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040)
- retval = write_buff8(info, src, addr, cnt);
+ retval = write_buff8(info, src, addr, cnt);
else
- retval = write_buff32(info, src, addr, cnt);
+ retval = write_buff32(info, src, addr, cnt);
return retval;
} /* end write_buff() */
@@ -732,31 +732,31 @@ static int write_word8(flash_info_t *info, ulong dest, ulong data)
/* Check if Flash is (sufficently) erased */
if ((*((volatile uchar *)dest) &
- (uchar)data) != (uchar)data) {
- return (2);
+ (uchar)data) != (uchar)data) {
+ return (2);
}
for (i=0; i < (4 / sizeof(uchar)); i++) {
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
- *(addr2 + 0x555) = (uchar)0xAA;
- *(addr2 + 0x2aa) = (uchar)0x55;
- *(addr2 + 0x555) = (uchar)0xA0;
+ *(addr2 + 0x555) = (uchar)0xAA;
+ *(addr2 + 0x2aa) = (uchar)0x55;
+ *(addr2 + 0x555) = (uchar)0xA0;
- dest2[i] = data2[i];
+ dest2[i] = data2[i];
- /* Wait for write to complete, up to 1ms */
- tcode = wait_for_DQ7((ulong)&dest2[i], data2[i], 1);
+ /* Wait for write to complete, up to 1ms */
+ tcode = wait_for_DQ7((ulong)&dest2[i], data2[i], 1);
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
- /* Make sure we didn't timeout */
- if (tcode) {
- rcode = 1;
- }
+ /* Make sure we didn't timeout */
+ if (tcode) {
+ rcode = 1;
+ }
}
return rcode;
@@ -771,7 +771,7 @@ static int write_word32(flash_info_t *info, ulong dest, ulong data)
/* Check if Flash is (sufficiently) erased */
if ((*addr & data) != data) {
- return (2);
+ return (2);
}
/* Disable interrupts which might cause a timeout here */
flag = disable_interrupts();
@@ -781,16 +781,16 @@ static int write_word32(flash_info_t *info, ulong dest, ulong data)
/* re-enable interrupts if necessary */
if (flag)
- enable_interrupts();
+ enable_interrupts();
start = get_timer (0);
while (((status = *addr) & 0x00800080) != 0x00800080) {
- WATCHDOG_RESET();
- if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
- *addr = 0x00FF00FF; /* restore read mode */
- return (1);
- }
+ WATCHDOG_RESET();
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ *addr = 0x00FF00FF; /* restore read mode */
+ return (1);
+ }
}
*addr = 0x00FF00FF; /* restore read mode */
@@ -808,50 +808,50 @@ static int _flash_protect(flash_info_t *info, long sector)
volatile long *addr = (unsigned long *)sector;
switch(info->flash_id & FLASH_TYPEMASK) {
- case FLASH_28F320J3A:
- case FLASH_28F640J3A:
- case FLASH_28F128J3A:
- /* Disable interrupts which might cause Flash to timeout */
- flag = disable_interrupts();
-
- /* Issue command */
- *addr = 0x00500050L; /* Clear the status register */
- *addr = 0x00600060L; /* Set lock bit setup */
- *addr = 0x00010001L; /* Set lock bit confirm */
-
- /* Wait for command completion */
- for (i = 0; i < 10; i++) { /* 75us timeout, wait 100us */
- udelay(10);
- if ((*addr & 0x00800080L) == 0x00800080L)
- break;
- }
-
- /* Not successful? */
- status = *addr;
- if (status != 0x00800080L) {
- printf("Protect %x sector failed: %x\n",
- (uint)sector, (uint)status);
- rcode = 1;
- }
-
- /* Restore read mode */
- *addr = 0x00ff00ffL;
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- break;
- case FLASH_AM040: /* No soft sector protection */
- break;
+ case FLASH_28F320J3A:
+ case FLASH_28F640J3A:
+ case FLASH_28F128J3A:
+ /* Disable interrupts which might cause Flash to timeout */
+ flag = disable_interrupts();
+
+ /* Issue command */
+ *addr = 0x00500050L; /* Clear the status register */
+ *addr = 0x00600060L; /* Set lock bit setup */
+ *addr = 0x00010001L; /* Set lock bit confirm */
+
+ /* Wait for command completion */
+ for (i = 0; i < 10; i++) { /* 75us timeout, wait 100us */
+ udelay(10);
+ if ((*addr & 0x00800080L) == 0x00800080L)
+ break;
+ }
+
+ /* Not successful? */
+ status = *addr;
+ if (status != 0x00800080L) {
+ printf("Protect %x sector failed: %x\n",
+ (uint)sector, (uint)status);
+ rcode = 1;
+ }
+
+ /* Restore read mode */
+ *addr = 0x00ff00ffL;
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ break;
+ case FLASH_AM040: /* No soft sector protection */
+ break;
}
/* Turn protection on for this sector */
for (i = 0; i < info->sector_count; i++) {
- if (info->start[i] == sector) {
- info->protect[i] = 1;
- break;
- }
+ if (info->start[i] == sector) {
+ info->protect[i] = 1;
+ break;
+ }
}
return rcode;
@@ -866,42 +866,42 @@ static int _flash_unprotect(flash_info_t *info, long sector)
volatile long *addr = (unsigned long *)sector;
switch(info->flash_id & FLASH_TYPEMASK) {
- case FLASH_28F320J3A:
- case FLASH_28F640J3A:
- case FLASH_28F128J3A:
- /* Disable interrupts which might cause Flash to timeout */
- flag = disable_interrupts();
-
- *addr = 0x00500050L; /* Clear the status register */
- *addr = 0x00600060L; /* Clear lock bit setup */
- *addr = 0x00D000D0L; /* Clear lock bit confirm */
-
- /* Wait for command completion */
- for (i = 0; i < 80 ; i++) { /* 700ms timeout, wait 800 */
- udelay(10000); /* Delay 10ms */
- if ((*addr & 0x00800080L) == 0x00800080L)
- break;
- }
-
- /* Not successful? */
- status = *addr;
- if (status != 0x00800080L) {
- printf("Un-protect %x sector failed: %x\n",
- (uint)sector, (uint)status);
- *addr = 0x00ff00ffL;
- rcode = 1;
- }
-
- /* restore read mode */
- *addr = 0x00ff00ffL;
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- break;
- case FLASH_AM040: /* No soft sector protection */
- break;
+ case FLASH_28F320J3A:
+ case FLASH_28F640J3A:
+ case FLASH_28F128J3A:
+ /* Disable interrupts which might cause Flash to timeout */
+ flag = disable_interrupts();
+
+ *addr = 0x00500050L; /* Clear the status register */
+ *addr = 0x00600060L; /* Clear lock bit setup */
+ *addr = 0x00D000D0L; /* Clear lock bit confirm */
+
+ /* Wait for command completion */
+ for (i = 0; i < 80 ; i++) { /* 700ms timeout, wait 800 */
+ udelay(10000); /* Delay 10ms */
+ if ((*addr & 0x00800080L) == 0x00800080L)
+ break;
+ }
+
+ /* Not successful? */
+ status = *addr;
+ if (status != 0x00800080L) {
+ printf("Un-protect %x sector failed: %x\n",
+ (uint)sector, (uint)status);
+ *addr = 0x00ff00ffL;
+ rcode = 1;
+ }
+
+ /* restore read mode */
+ *addr = 0x00ff00ffL;
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ break;
+ case FLASH_AM040: /* No soft sector protection */
+ break;
}
/*
@@ -910,14 +910,14 @@ static int _flash_unprotect(flash_info_t *info, long sector)
* protection on a specific sector.
*/
for (i = 0; i < info->sector_count; i++) {
- if (info->start[i] != sector) {
- if (info->protect[i]) {
- if (_flash_protect(info, info->start[i]))
- rcode = 1;
+ if (info->start[i] != sector) {
+ if (info->protect[i]) {
+ if (_flash_protect(info, info->start[i]))
+ rcode = 1;
}
- }
- else /* Turn protection off for this sector */
- info->protect[i] = 0;
+ }
+ else /* Turn protection off for this sector */
+ info->protect[i] = 0;
}
return rcode;
@@ -929,13 +929,12 @@ int flash_real_protect(flash_info_t *info, long sector, int prot)
int rcode;
if (prot)
- rcode = _flash_protect(info, info->start[sector]);
+ rcode = _flash_protect(info, info->start[sector]);
else
- rcode = _flash_unprotect(info, info->start[sector]);
+ rcode = _flash_unprotect(info, info->start[sector]);
return rcode;
} /* end flash_real_protect() */
/*-----------------------------------------------------------------------
*/
-
diff --git a/board/w7o/fpga.c b/board/w7o/fpga.c
index e84123b..97af924 100644
--- a/board/w7o/fpga.c
+++ b/board/w7o/fpga.c
@@ -36,11 +36,11 @@ fpga_img_write(unsigned long *src, unsigned long len, unsigned short *daddr)
volatile unsigned short *dest = daddr; /* volatile-bypass optimizer */
for (i = 0; i < len; i++, src++) {
- val = *src;
- *dest = (unsigned short)((val & 0xff000000L) >> 16);
- *dest = (unsigned short)((val & 0x00ff0000L) >> 8);
- *dest = (unsigned short)(val & 0x0000ff00L);
- *dest = (unsigned short)((val & 0x000000ffL) << 8);
+ val = *src;
+ *dest = (unsigned short)((val & 0xff000000L) >> 16);
+ *dest = (unsigned short)((val & 0x00ff0000L) >> 8);
+ *dest = (unsigned short)(val & 0x0000ff00L);
+ *dest = (unsigned short)((val & 0x000000ffL) << 8);
}
/* Terminate programming with 4 C clocks */
@@ -88,14 +88,14 @@ fpgaDownload(unsigned char *saddr,
/* Wait for FPGA init line */
while(in32(IBM405GP_GPIO0_IR) & GPIO_XCV_INIT) { /* Wait INIT line low */
- /* Check for timeout - 100us max, so use 3ms */
- if (get_timer(start) > 3) {
- printf(" failed to start init.\n");
- log_warn(ERR_XINIT0); /* Don't halt */
-
- /* Reset line stays low */
- goto done; /* I like gotos... */
- }
+ /* Check for timeout - 100us max, so use 3ms */
+ if (get_timer(start) > 3) {
+ printf(" failed to start init.\n");
+ log_warn(ERR_XINIT0); /* Don't halt */
+
+ /* Reset line stays low */
+ goto done; /* I like gotos... */
+ }
}
/* Unreset FPGA */
@@ -105,75 +105,75 @@ fpgaDownload(unsigned char *saddr,
/* Wait for FPGA end of init period . */
while(!(in32(IBM405GP_GPIO0_IR) & GPIO_XCV_INIT)) { /* Wait for INIT hi */
- /* Check for timeout */
- if (get_timer(start) > 3) {
- printf(" failed to exit init.\n");
- log_warn(ERR_XINIT1);
+ /* Check for timeout */
+ if (get_timer(start) > 3) {
+ printf(" failed to exit init.\n");
+ log_warn(ERR_XINIT1);
- /* Reset FPGA */
- grego &= ~GPIO_XCV_PROG; /* PROG line low */
- out32(IBM405GP_GPIO0_OR, grego);
+ /* Reset FPGA */
+ grego &= ~GPIO_XCV_PROG; /* PROG line low */
+ out32(IBM405GP_GPIO0_OR, grego);
- goto done;
- }
+ goto done;
+ }
}
/* Now program FPGA ... */
ndest = dest;
for (i = 0; i < CONFIG_NUM_FPGAS; i++) {
- /* Toggle IRQ/GPIO */
- greg = mfdcr(CPC0_CR0); /* get chip ctrl register */
- greg |= eirq; /* toggle irq/gpio */
- mtdcr(CPC0_CR0, greg); /* ... just do it */
-
- /* turn on open drain for CNFG */
- greg = in32(IBM405GP_GPIO0_ODR); /* get open drain register */
- greg |= cnfg; /* CNFG open drain */
- out32(IBM405GP_GPIO0_ODR, greg); /* .. just do it */
-
- /* Turn output enable on for CNFG */
- greg = in32(IBM405GP_GPIO0_TCR); /* get tristate register */
- greg |= cnfg; /* CNFG tristate inactive */
- out32(IBM405GP_GPIO0_TCR, greg); /* ... just do it */
-
- /* Setup FPGA for programming */
- grego &= ~cnfg; /* CONFIG line low */
- out32(IBM405GP_GPIO0_OR, grego);
-
- /*
- * Program the FPGA
- */
- printf("\n destination: 0x%lx ", (unsigned long)ndest);
-
- fpga_img_write(source, length, (unsigned short *)ndest);
-
- /* Done programming */
- grego |= cnfg; /* CONFIG line high */
- out32(IBM405GP_GPIO0_OR, grego);
-
- /* Turn output enable OFF for CNFG */
- greg = in32(IBM405GP_GPIO0_TCR); /* get tristate register */
- greg &= ~cnfg; /* CNFG tristate inactive */
- out32(IBM405GP_GPIO0_TCR, greg); /* ... just do it */
-
- /* Toggle IRQ/GPIO */
- greg = mfdcr(CPC0_CR0); /* get chip ctrl register */
- greg &= ~eirq; /* toggle irq/gpio */
- mtdcr(CPC0_CR0, greg); /* ... just do it */
-
- ndest = (unsigned short *)((char *)ndest + 0x00100000L); /* XXX - Next FPGA addr */
- cnfg >>= 1; /* XXX - Next */
- eirq >>= 1;
+ /* Toggle IRQ/GPIO */
+ greg = mfdcr(CPC0_CR0); /* get chip ctrl register */
+ greg |= eirq; /* toggle irq/gpio */
+ mtdcr(CPC0_CR0, greg); /* ... just do it */
+
+ /* turn on open drain for CNFG */
+ greg = in32(IBM405GP_GPIO0_ODR); /* get open drain register */
+ greg |= cnfg; /* CNFG open drain */
+ out32(IBM405GP_GPIO0_ODR, greg); /* .. just do it */
+
+ /* Turn output enable on for CNFG */
+ greg = in32(IBM405GP_GPIO0_TCR); /* get tristate register */
+ greg |= cnfg; /* CNFG tristate inactive */
+ out32(IBM405GP_GPIO0_TCR, greg); /* ... just do it */
+
+ /* Setup FPGA for programming */
+ grego &= ~cnfg; /* CONFIG line low */
+ out32(IBM405GP_GPIO0_OR, grego);
+
+ /*
+ * Program the FPGA
+ */
+ printf("\n destination: 0x%lx ", (unsigned long)ndest);
+
+ fpga_img_write(source, length, (unsigned short *)ndest);
+
+ /* Done programming */
+ grego |= cnfg; /* CONFIG line high */
+ out32(IBM405GP_GPIO0_OR, grego);
+
+ /* Turn output enable OFF for CNFG */
+ greg = in32(IBM405GP_GPIO0_TCR); /* get tristate register */
+ greg &= ~cnfg; /* CNFG tristate inactive */
+ out32(IBM405GP_GPIO0_TCR, greg); /* ... just do it */
+
+ /* Toggle IRQ/GPIO */
+ greg = mfdcr(CPC0_CR0); /* get chip ctrl register */
+ greg &= ~eirq; /* toggle irq/gpio */
+ mtdcr(CPC0_CR0, greg); /* ... just do it */
+
+ ndest = (unsigned short *)((char *)ndest + 0x00100000L); /* XXX - Next FPGA addr */
+ cnfg >>= 1; /* XXX - Next */
+ eirq >>= 1;
}
/* Terminate programming with 4 C clocks */
ndest = dest;
for (i = 0; i < CONFIG_NUM_FPGAS; i++) {
- val = *ndest;
- val = *ndest;
- val = *ndest;
- val = *ndest;
- ndest = (unsigned short *)((char *)ndest + 0x00100000L);
+ val = *ndest;
+ val = *ndest;
+ val = *ndest;
+ val = *ndest;
+ ndest = (unsigned short *)((char *)ndest + 0x00100000L);
}
/* Setup timer */
@@ -182,17 +182,17 @@ fpgaDownload(unsigned char *saddr,
/* Wait for FPGA end of programming period . */
while(!(in32(IBM405GP_GPIO0_IR) & GPIO_XCV_DONE)) { /* Test DONE low */
- /* Check for timeout */
- if (get_timer(start) > 3) {
- printf(" done failed to come high.\n");
- log_warn(ERR_XDONE1);
+ /* Check for timeout */
+ if (get_timer(start) > 3) {
+ printf(" done failed to come high.\n");
+ log_warn(ERR_XDONE1);
- /* Reset FPGA */
- grego &= ~GPIO_XCV_PROG; /* PROG line low */
- out32(IBM405GP_GPIO0_OR, grego);
+ /* Reset FPGA */
+ grego &= ~GPIO_XCV_PROG; /* PROG line low */
+ out32(IBM405GP_GPIO0_OR, grego);
- goto done;
- }
+ goto done;
+ }
}
printf("\n FPGA load succeeded\n");
@@ -236,7 +236,7 @@ int init_fpga(void)
/* Pedantic */
if ((len < 0x133A4) || (len > 0x80000))
- goto bad_image;
+ goto bad_image;
/*
* Get the file name pointer and length.
@@ -260,16 +260,16 @@ int init_fpga(void)
*/
calc_crc = crc32(0, xcv_buf, xcv_len);
if (crc != calc_crc) {
- printf("\nfailed - bad CRC\n");
- goto done;
+ printf("\nfailed - bad CRC\n");
+ goto done;
}
/* Output the file name */
printf("file name : ");
for (i=0;i<fn_len;i++) {
- bufchar = fn_buf[+i];
- if (bufchar<' ' || bufchar>'~') bufchar = '.';
- putc(bufchar);
+ bufchar = fn_buf[+i];
+ if (bufchar<' ' || bufchar>'~') bufchar = '.';
+ putc(bufchar);
}
/*
@@ -326,7 +326,7 @@ int init_fpga(void)
* Program the FPGA.
*/
retval = fpgaDownload((unsigned char*)xcv_buf, xcv_len,
- (unsigned short *)0xfd000000L);
+ (unsigned short *)0xfd000000L);
return retval;
bad_image:
@@ -377,4 +377,3 @@ void test_fpga(unsigned short *daddr)
printf(" FPGA ready\n");
return;
}
-
diff --git a/board/w7o/fsboot.c b/board/w7o/fsboot.c
index 800583d..0ef9a61 100644
--- a/board/w7o/fsboot.c
+++ b/board/w7o/fsboot.c
@@ -24,11 +24,12 @@
#include <common.h>
#include <config.h>
#include <command.h>
-#include <cmd_elf.h>
/*
* FIXME: Add code to test image and it's header.
*/
+extern int valid_elf_image (unsigned long addr);
+
static int
image_check(ulong addr)
{
@@ -87,4 +88,3 @@ init_fsboot(void)
return;
}
-
diff --git a/board/w7o/init.S b/board/w7o/init.S
index 511a1bb..35d7dbc 100644
--- a/board/w7o/init.S
+++ b/board/w7o/init.S
@@ -262,4 +262,3 @@ sdram_init:
blr /* Return to calling function */
.Lfe1: .size sdram_init,.Lfe1-sdram_init
/* end sdram_init() */
-
diff --git a/board/w7o/post1.S b/board/w7o/post1.S
index d510cca..21d206e 100644
--- a/board/w7o/post1.S
+++ b/board/w7o/post1.S
@@ -282,7 +282,7 @@ outside:
addi r31, 0, 0x00ff /* r31 = one byte of set bits */
stb r31,0(r28) /* save ff in referance address */
- /* ghost (inner) loop, now check all posible ghosted addresses */
+ /* ghost (inner) loop, now check all posible ghosted addresses */
addi r29, 0, 0 /* start ghosted loop counter at 0 */
inside:
/*
@@ -323,11 +323,11 @@ Casper: /* we found a ghost !! */
addi r3, 0, ERR_ADDF /* get indexed error message */
bl log_err /* log error led error code */
gb_done: /* pack your bags, and go home */
- lmw r25, 8(r1) /* restore r25 - r31 from stack */
- lwz r0, +40(r1) /* Get saved link register */
- addi r1, r1, +36 /* Remove frame from stack */
- mtlr r0 /* Restore link register */
- blr /* Return to calling function */
+ lmw r25, 8(r1) /* restore r25 - r31 from stack */
+ lwz r0, +40(r1) /* Get saved link register */
+ addi r1, r1, +36 /* Remove frame from stack */
+ mtlr r0 /* Restore link register */
+ blr /* Return to calling function */
/****************************************************
******** SDRAM data fill tests **********
@@ -373,7 +373,6 @@ Bit_Buster:
blr /* Return to calling function */
-
/****************************************************
******** fill test ********
***************************************************/
@@ -382,12 +381,12 @@ Bit_Buster:
/* r4 = Value to write */
/* r3 = Error code */
fill_test:
- mflr r0 /* Get link register */
- stwu r1, -32(r1) /* Save back chain and move SP */
- stw r0, +36(r1) /* Save link register */
- stmw r27, 8(r1) /* save r27 - r31 on stack */
- /* r31 - scratch register */
- /* r30 - memory address */
+ mflr r0 /* Get link register */
+ stwu r1, -32(r1) /* Save back chain and move SP */
+ stw r0, +36(r1) /* Save link register */
+ stmw r27, 8(r1) /* save r27 - r31 on stack */
+ /* r31 - scratch register */
+ /* r30 - memory address */
mr r27, r3
mr r28, r4
mr r29, r5
@@ -412,8 +411,8 @@ ft_0a: bdnz ft_0 /* Round and round... */
mtctr r31 /* setup counter */
addi r30, 0, 0 /* Make r30 = addr 0 */
ft_1: lwz r31, 0(r30) /* get value from memory */
- xor. r31, r31, r28 /* Writen = Read ? */
- bne ft_err /* If bad, than halt */
+ xor. r31, r31, r28 /* Writen = Read ? */
+ bne ft_err /* If bad, than halt */
addi r30, r30, 4 /* Increment to next word */
andi. r31, r30, 0xffff /* check for 2^16 loops*/
bne ft_1a /* if not there, then skip */
@@ -431,11 +430,11 @@ ft_err: addi r29, r27, 0 /* save current led code */
bl log_err /* output led err code, halt CPU */
fill_done:
- lmw r27, 8(r1) /* restore r27 - r31 from stack */
- lwz r0, +36(r1) /* Get saved link register */
- addi r1, r1, +32 /* Remove frame from stack */
- mtlr r0 /* Restore link register */
- blr /* Return to calling function */
+ lmw r27, 8(r1) /* restore r27 - r31 from stack */
+ lwz r0, +36(r1) /* Get saved link register */
+ addi r1, r1, +32 /* Remove frame from stack */
+ mtlr r0 /* Restore link register */
+ blr /* Return to calling function */
/****************************************************
@@ -563,7 +562,7 @@ log_warn: /* output a warning, then continue with operations */
mtctr r3
log_2:
WATCHDOG_RESET /* this keeps dog from barking, */
- /* and takes time */
+ /* and takes time */
bdnz log_2 /* loop till time expires */
/* restore stack and return */
@@ -585,27 +584,27 @@ temp_uart_init:
stwu r1, -8(r1) /* Save back chain and move SP */
stw r0, +12(r1) /* Save link register */
- addis r3, 0, 0xef60
- ori r3, r3, 0x0303 /* r3 = UART0_LCR */
- addi r4, 0, 0x83 /* n81 format, divisor regs enabled */
- stb r4, 0(r3)
+ addis r3, 0, 0xef60
+ ori r3, r3, 0x0303 /* r3 = UART0_LCR */
+ addi r4, 0, 0x83 /* n81 format, divisor regs enabled */
+ stb r4, 0(r3)
/* set baud rate to use internal clock,
baud = (200e6/16)/31/42 = 9600 */
- addis r3, 0, 0xef60 /* Address of baud divisor reg */
- ori r3, r3, 0x0300 /* UART0_DLM */
- addi r4, 0, +42 /* uart baud divisor LSB = 93 */
- stb r4, 0(r3) /* baud = (200 /16)/14/93 */
+ addis r3, 0, 0xef60 /* Address of baud divisor reg */
+ ori r3, r3, 0x0300 /* UART0_DLM */
+ addi r4, 0, +42 /* uart baud divisor LSB = 93 */
+ stb r4, 0(r3) /* baud = (200 /16)/14/93 */
- addi r3, r3, 0x0001 /* uart baud divisor addr */
- addi r4, 0, 0
- stb r4, 0(r3) /* Divisor Latch MSB = 0 */
+ addi r3, r3, 0x0001 /* uart baud divisor addr */
+ addi r4, 0, 0
+ stb r4, 0(r3) /* Divisor Latch MSB = 0 */
- addis r3, 0, 0xef60
- ori r3, r3, 0x0303 /* r3 = UART0_LCR */
- addi r4, 0, 0x03 /* n81 format, tx/rx regs enabled */
- stb r4, 0(r3)
+ addis r3, 0, 0xef60
+ ori r3, r3, 0x0303 /* r3 = UART0_LCR */
+ addi r4, 0, 0x03 /* n81 format, tx/rx regs enabled */
+ stb r4, 0(r3)
/* output a few line feeds */
addi r3, 0, '\n' /* load line feed */
@@ -613,7 +612,7 @@ temp_uart_init:
addi r3, 0, '\n' /* load line feed */
bl post_putc /* output the char */
- /* restore stack and return */
+ /* restore stack and return */
lwz r0, +12(r1) /* Get saved link register */
mtlr r0 /* Restore link register */
addi r1, r1, +8 /* Remove frame from stack */
@@ -633,7 +632,7 @@ post_putc:
stw r0, +24(r1) /* Save link register */
stmw r29, 8(r1) /* save r29 - r31 on stack
r31 - uart base address
- r30 - delay counter
+ r30 - delay counter
r29 - scratch reg */
addis r31, 0, 0xef60 /* Point to uart base */
@@ -687,7 +686,7 @@ pputs_err:
b pputs_end /* were outa here */
pputs_term:
addi r3, 0, 1 /* set success code */
- /* restore stack and return */
+ /* restore stack and return */
pputs_end:
lwz r31, 8(r1) /* restore r27 - r31 from stack */
lwz r0, +16(r1) /* Get saved link register */
@@ -696,7 +695,6 @@ pputs_end:
blr /* Return to calling function */
-
/********************************************************************
***** disp_hex
***** Routine to display a hex value from a register.
@@ -736,10 +734,9 @@ pputh_skip:
pputh_err:
addi r3, 0, -1 /* set error code */
pputh_done:
- /* restore stack and return */
+ /* restore stack and return */
lmw r30, 8(r1) /* restore r30 - r31 from stack */
lwz r0, +20(r1) /* Get saved link register */
addi r1, r1, +16 /* Remove frame from stack */
mtlr r0 /* Restore link register */
blr /* Return to calling function */
-
diff --git a/board/w7o/post2.c b/board/w7o/post2.c
index 271c197..e590128 100644
--- a/board/w7o/post2.c
+++ b/board/w7o/post2.c
@@ -106,4 +106,3 @@ void post2(void)
if(dtt_test(4) != 0) log_warn(ERR_Ttest1);
#endif /* CONFIG_DTT_LM75 */
} /* post2() */
-
diff --git a/board/w7o/u-boot.lds b/board/w7o/u-boot.lds
index 4c753fc..5576ab9 100644
--- a/board/w7o/u-boot.lds
+++ b/board/w7o/u-boot.lds
@@ -103,6 +103,11 @@ SECTIONS
_edata = .;
PROVIDE (edata = .);
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
__start___ex_table = .;
__ex_table : { *(__ex_table) }
__stop___ex_table = .;
diff --git a/board/w7o/u-boot.lds.debug b/board/w7o/u-boot.lds.debug
index 6f65aa5..f996db3 100644
--- a/board/w7o/u-boot.lds.debug
+++ b/board/w7o/u-boot.lds.debug
@@ -106,6 +106,11 @@ SECTIONS
_edata = .;
PROVIDE (edata = .);
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
__start___ex_table = .;
__ex_table : { *(__ex_table) }
__stop___ex_table = .;
@@ -128,4 +133,3 @@ SECTIONS
_end = . ;
PROVIDE (end = .);
}
-
diff --git a/board/w7o/vpd.c b/board/w7o/vpd.c
index c24b127..fc2cd98 100644
--- a/board/w7o/vpd.c
+++ b/board/w7o/vpd.c
@@ -405,4 +405,3 @@ void vpd_print(VPD *vpdInfo)
printf(dsfmt, sp, "WE Data Width", vpdInfo->flashCfg.weDataWidth);
}
} /* vpd_print() */
-
diff --git a/board/w7o/vpd.h b/board/w7o/vpd.h
index 35bbe3e..1b71c8d 100644
--- a/board/w7o/vpd.h
+++ b/board/w7o/vpd.h
@@ -93,7 +93,7 @@ typedef struct vpd_header {
#define VPD_DATA_SIZE (VPD_MAX_EEPROM_SIZE - SDRAM_SPD_DATA_SIZE - \
- sizeof(vpd_header_t))
+ sizeof(vpd_header_t))
typedef struct vpd_s {
vpd_header_t header;
unsigned char packets[VPD_DATA_SIZE];
@@ -132,4 +132,3 @@ extern int vpd_get_data(unsigned char dev_addr, VPD *vpd);
extern void vpd_print(VPD *vpdInfo);
#endif /* _VPD_H_ */
-
diff --git a/board/w7o/w7o.c b/board/w7o/w7o.c
index b404d61..bb52236 100644
--- a/board/w7o/w7o.c
+++ b/board/w7o/w7o.c
@@ -22,6 +22,7 @@
*/
#include <common.h>
+#include <command.h>
#include "w7o.h"
#include <asm/processor.h>
@@ -268,4 +269,3 @@ int misc_init_r (void)
return (0);
}
-
diff --git a/board/w7o/w7o.h b/board/w7o/w7o.h
index f0af2d6..8458166 100644
--- a/board/w7o/w7o.h
+++ b/board/w7o/w7o.h
@@ -90,4 +90,3 @@ extern int temp_uart_init(void);
extern void init_fsboot(void);
#endif /* _W7O_H_ */
-
diff --git a/board/w7o/watchdog.c b/board/w7o/watchdog.c
index 3fca5d3..4bbd94f 100644
--- a/board/w7o/watchdog.c
+++ b/board/w7o/watchdog.c
@@ -45,4 +45,3 @@ void hw_watchdog_reset(void)
} /* hw_watchdog_reset() */
#endif /* CONFIG_HW_WATCHDOG */
-