summaryrefslogtreecommitdiff
path: root/board
diff options
context:
space:
mode:
Diffstat (limited to 'board')
-rw-r--r--board/davinci/ea20/ea20.c30
1 files changed, 29 insertions, 1 deletions
diff --git a/board/davinci/ea20/ea20.c b/board/davinci/ea20/ea20.c
index 4e4107a..3b636ff 100644
--- a/board/davinci/ea20/ea20.c
+++ b/board/davinci/ea20/ea20.c
@@ -35,6 +35,7 @@
#include <asm/arch/emac_defs.h>
#include <asm/io.h>
#include <asm/arch/davinci_misc.h>
+#include <asm/arch/gpio.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -90,6 +91,12 @@ const struct pinmux_config nand_pins[] = {
};
#endif
+const struct pinmux_config gpio_pins[] = {
+ { pinmux(13), 8, 0 }, /* GPIO6[15] RESETOUTn on SOM*/
+ { pinmux(13), 8, 5 }, /* GPIO6[10] U0_SW0 on EA20-00101_2*/
+ { pinmux(13), 8, 3 } /* GPIO6[12] U0_SW1 on EA20-00101_2*/
+};
+
static const struct pinmux_resource pinmuxes[] = {
#ifdef CONFIG_SPI_FLASH
PINMUX_ITEM(spi1_pins),
@@ -110,11 +117,32 @@ static const struct lpsc_resource lpsc[] = {
int board_init(void)
{
+ struct davinci_gpio *gpio6_base =
+ (struct davinci_gpio *)DAVINCI_GPIO_BANK67;
+
+ /* PinMux for GPIO */
+ if (davinci_configure_pin_mux(gpio_pins, ARRAY_SIZE(gpio_pins)) != 0)
+ return 1;
+
+ /* Set the RESETOUTn low */
+ writel((readl(&gpio6_base->set_data) & ~(1 << 15)),
+ &gpio6_base->set_data);
+ writel((readl(&gpio6_base->dir) & ~(1 << 15)), &gpio6_base->dir);
+
+ /* Set U0_SW0 low for UART0 as console*/
+ writel((readl(&gpio6_base->set_data) & ~(1 << 10)),
+ &gpio6_base->set_data);
+ writel((readl(&gpio6_base->dir) & ~(1 << 10)), &gpio6_base->dir);
+
+ /* Set U0_SW1 low for UART0 as console*/
+ writel((readl(&gpio6_base->set_data) & ~(1 << 12)),
+ &gpio6_base->set_data);
+ writel((readl(&gpio6_base->dir) & ~(1 << 12)), &gpio6_base->dir);
+
#ifndef CONFIG_USE_IRQ
irq_init();
#endif
-
#ifdef CONFIG_NAND_DAVINCI
/*
* NAND CS setup - cycle counts based on da850evm NAND timings in the