summaryrefslogtreecommitdiff
path: root/cpu/mpc85xx/tsec.c
diff options
context:
space:
mode:
Diffstat (limited to 'cpu/mpc85xx/tsec.c')
-rw-r--r--cpu/mpc85xx/tsec.c792
1 files changed, 609 insertions, 183 deletions
diff --git a/cpu/mpc85xx/tsec.c b/cpu/mpc85xx/tsec.c
index 2d0517a..0d858ed 100644
--- a/cpu/mpc85xx/tsec.c
+++ b/cpu/mpc85xx/tsec.c
@@ -1,13 +1,14 @@
/*
* tsec.c
- * Motorola Three Speed Ethernet Controller driver
+ * Freescale Three Speed Ethernet Controller driver
*
* This software may be used and distributed according to the
* terms of the GNU Public License, Version 2, incorporated
* herein by reference.
*
+ * Copyright 2004 Freescale Semiconductor.
* (C) Copyright 2003, Motorola, Inc.
- * maintained by Xianghua Xiao (x.xiao@motorola.com)
+ * maintained by Jon Loeliger (loeliger@freescale.com)
* author Andy Fleming
*
*/
@@ -26,9 +27,9 @@
#undef TSEC_DEBUG
#ifdef TSEC_DEBUG
-#define DBGPRINT(x) printf(x)
+#define DBGPRINT(x,y) printf(x,y)
#else
-#define DBGPRINT(x)
+#define DBGPRINT(x,y)
#endif
static uint rxIdx; /* index of the current RX buffer */
@@ -39,6 +40,59 @@ typedef volatile struct rtxbd {
rxbd8_t rxbd[PKTBUFSRX];
} RTXBD;
+struct tsec_info_struct {
+ unsigned int phyaddr;
+ unsigned int gigabit;
+ unsigned int phyregidx;
+};
+
+
+/* The tsec_info structure contains 3 values which the
+ * driver uses to determine how to operate a given ethernet
+ * device. For now, the structure is initialized with the
+ * knowledge that all current implementations have 2 TSEC
+ * devices, and one FEC. The information needed is:
+ * phyaddr - The address of the PHY which is attached to
+ * the given device.
+ *
+ * gigabit - This variable indicates whether the device
+ * supports gigabit speed ethernet
+ *
+ * phyregidx - This variable specifies which ethernet device
+ * controls the MII Management registers which are connected
+ * to the PHY. For 8540/8560, only TSEC1 (index 0) has
+ * access to the PHYs, so all of the entries have "0".
+ *
+ * The values specified in the table are taken from the board's
+ * config file in include/configs/. When implementing a new
+ * board with ethernet capability, it is necessary to define:
+ * TSEC1_PHY_ADDR
+ * TSEC1_PHYIDX
+ * TSEC2_PHY_ADDR
+ * TSEC2_PHYIDX
+ *
+ * and for 8560:
+ * FEC_PHY_ADDR
+ * FEC_PHYIDX
+ */
+static struct tsec_info_struct tsec_info[] = {
+#ifdef CONFIG_MPC85XX_TSEC1
+ {TSEC1_PHY_ADDR, 1, TSEC1_PHYIDX},
+#endif
+#ifdef CONFIG_MPC85XX_TSEC2
+ {TSEC2_PHY_ADDR, 1, TSEC2_PHYIDX},
+#endif
+#ifdef CONFIG_MPC85XX_FEC
+ {FEC_PHY_ADDR, 0, FEC_PHYIDX},
+#endif
+};
+
+#define MAXCONTROLLERS 3
+
+static int relocated = 0;
+
+static struct tsec_private *privlist[MAXCONTROLLERS];
+
#ifdef __GNUC__
static RTXBD rtx __attribute__ ((aligned(8)));
#else
@@ -49,31 +103,48 @@ static int tsec_send(struct eth_device* dev, volatile void *packet, int length);
static int tsec_recv(struct eth_device* dev);
static int tsec_init(struct eth_device* dev, bd_t * bd);
static void tsec_halt(struct eth_device* dev);
-static void init_registers(tsec_t *regs);
-static void startup_tsec(tsec_t *regs);
-static void init_phy(tsec_t *regs);
-uint read_phy_reg(tsec_t *regbase, uint phyid, uint offset);
-
-static int phy_id = -1;
-
-/* Initialize device structure. returns 0 on failure, 1 on
- * success */
-int tsec_initialize(bd_t *bis)
+static void init_registers(volatile tsec_t *regs);
+static void startup_tsec(struct eth_device *dev);
+static int init_phy(struct eth_device *dev);
+void write_phy_reg(struct tsec_private *priv, uint regnum, uint value);
+uint read_phy_reg(struct tsec_private *priv, uint regnum);
+struct phy_info * get_phy_info(struct eth_device *dev);
+void phy_run_commands(struct tsec_private *priv, struct phy_cmd *cmd);
+static void adjust_link(struct eth_device *dev);
+static void relocate_cmds(void);
+
+/* Initialize device structure. Returns success if PHY
+ * initialization succeeded (i.e. if it recognizes the PHY)
+ */
+int tsec_initialize(bd_t *bis, int index)
{
struct eth_device* dev;
int i;
- tsec_t *regs = (tsec_t *)(TSEC_BASE_ADDR);
+ struct tsec_private *priv;
dev = (struct eth_device*) malloc(sizeof *dev);
- if(dev == NULL)
+ if(NULL == dev)
return 0;
memset(dev, 0, sizeof *dev);
- sprintf(dev->name, "MOTO ETHERNET");
+ priv = (struct tsec_private *) malloc(sizeof(*priv));
+
+ if(NULL == priv)
+ return 0;
+
+ privlist[index] = priv;
+ priv->regs = (volatile tsec_t *)(TSEC_BASE_ADDR + index*TSEC_SIZE);
+ priv->phyregs = (volatile tsec_t *)(TSEC_BASE_ADDR +
+ tsec_info[index].phyregidx*TSEC_SIZE);
+
+ priv->phyaddr = tsec_info[index].phyaddr;
+ priv->gigabit = tsec_info[index].gigabit;
+
+ sprintf(dev->name, "MOTO ENET%d", index);
dev->iobase = 0;
- dev->priv = 0;
+ dev->priv = priv;
dev->init = tsec_init;
dev->halt = tsec_halt;
dev->send = tsec_send;
@@ -85,70 +156,32 @@ int tsec_initialize(bd_t *bis)
eth_register(dev);
- /* Reconfigure the PHY to advertise everything here
- * so that it works with both gigabit and 10/100 */
-#ifdef CONFIG_PHY_M88E1011
- /* Assign a Physical address to the TBI */
- regs->tbipa=TBIPA_VALUE;
-
- /* reset the management interface */
- regs->miimcfg=MIIMCFG_RESET;
- regs->miimcfg=MIIMCFG_INIT_VALUE;
-
- /* Wait until the bus is free */
- while(regs->miimind & MIIMIND_BUSY);
-
- /* Locate PHYs. Skip TBIPA, which we know is 31.
- */
- for (i=0; i<31; i++) {
- if (read_phy_reg(regs, i, 2) == 0x141) {
- if (phy_id == -1)
- phy_id = i;
-#ifdef TSEC_DEBUG
- printf("Found Marvell PHY at 0x%02x\n", i);
-#endif
- }
- }
-#ifdef TSEC_DEBUG
- printf("Using PHY ID 0x%02x\n", phy_id);
-#endif
- write_phy_reg(regs, phy_id, MIIM_CONTROL, MIIM_CONTROL_RESET);
-
- RESET_ERRATA(regs, phy_id);
-
- /* Configure the PHY to advertise gbit and 10/100 */
- write_phy_reg(regs, phy_id, MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT);
- write_phy_reg(regs, phy_id, MIIM_ANAR, MIIM_ANAR_INIT);
+ /* Reset the MAC */
+ priv->regs->maccfg1 |= MACCFG1_SOFT_RESET;
+ priv->regs->maccfg1 &= ~(MACCFG1_SOFT_RESET);
- /* Reset the PHY so the new settings take effect */
- write_phy_reg(regs, phy_id, MIIM_CONTROL, MIIM_CONTROL_RESET);
-#endif
- return 1;
+ /* Try to initialize PHY here, and return */
+ return init_phy(dev);
}
/* Initializes data structures and registers for the controller,
- * and brings the interface up */
+ * and brings the interface up. Returns the link status, meaning
+ * that it returns success if the link is up, failure otherwise.
+ * This allows u-boot to find the first active controller. */
int tsec_init(struct eth_device* dev, bd_t * bd)
{
- tsec_t *regs;
uint tempval;
char tmpbuf[MAC_ADDR_LEN];
int i;
-
- regs = (tsec_t *)(TSEC_BASE_ADDR);
+ struct tsec_private *priv = (struct tsec_private *)dev->priv;
+ volatile tsec_t *regs = priv->regs;
/* Make sure the controller is stopped */
tsec_halt(dev);
- /* Reset the MAC */
- regs->maccfg1 |= MACCFG1_SOFT_RESET;
-
- /* Clear MACCFG1[Soft_Reset] */
- regs->maccfg1 &= ~(MACCFG1_SOFT_RESET);
-
- /* Init MACCFG2. Defaults to GMII/MII */
+ /* Init MACCFG2. Defaults to GMII */
regs->maccfg2 = MACCFG2_INIT_SETTINGS;
/* Init ECNTRL */
@@ -157,7 +190,7 @@ int tsec_init(struct eth_device* dev, bd_t * bd)
/* Copy the station address into the address registers.
* Backwards, because little endian MACS are dumb */
for(i=0;i<MAC_ADDR_LEN;i++) {
- tmpbuf[MAC_ADDR_LEN - 1 - i] = bd->bi_enetaddr[i];
+ tmpbuf[MAC_ADDR_LEN - 1 - i] = dev->enetaddr[i];
}
(uint)(regs->macstnaddr1) = *((uint *)(tmpbuf));
@@ -165,9 +198,6 @@ int tsec_init(struct eth_device* dev, bd_t * bd)
(uint)(regs->macstnaddr2) = tempval;
- /* Initialize the PHY */
- init_phy(regs);
-
/* reset the indices to zero */
rxIdx = 0;
txIdx = 0;
@@ -176,27 +206,49 @@ int tsec_init(struct eth_device* dev, bd_t * bd)
init_registers(regs);
/* Ready the device for tx/rx */
- startup_tsec(regs);
+ startup_tsec(dev);
- return 1;
+ /* If there's no link, fail */
+ return priv->link;
}
-/* Reads from the register at offset in the PHY at phyid, */
-/* using the register set defined in regbase. It waits until the */
-/* bits in the miimstat are valid (miimind notvalid bit cleared), */
-/* and then passes those bits on to the variable specified in */
-/* value */
-/* Before it does the read, it needs to clear the command field */
-uint read_phy_reg(tsec_t *regbase, uint phyid, uint offset)
+/* Write value to the device's PHY through the registers
+ * specified in priv, modifying the register specified in regnum.
+ * It will wait for the write to be done (or for a timeout to
+ * expire) before exiting
+ */
+void write_phy_reg(struct tsec_private *priv, uint regnum, uint value)
+{
+ volatile tsec_t *regbase = priv->phyregs;
+ uint phyid = priv->phyaddr;
+ int timeout=1000000;
+
+ regbase->miimadd = (phyid << 8) | regnum;
+ regbase->miimcon = value;
+ asm("msync");
+
+ timeout=1000000;
+ while((regbase->miimind & MIIMIND_BUSY) && timeout--);
+}
+
+
+/* Reads register regnum on the device's PHY through the
+ * registers specified in priv. It lowers and raises the read
+ * command, and waits for the data to become valid (miimind
+ * notvalid bit cleared), and the bus to cease activity (miimind
+ * busy bit cleared), and then returns the value
+ */
+uint read_phy_reg(struct tsec_private *priv, uint regnum)
{
uint value;
+ volatile tsec_t *regbase = priv->phyregs;
+ uint phyid = priv->phyaddr;
- /* Put the address of the phy, and the register number into
- * MIIMADD
- */
- regbase->miimadd = (phyid << 8) | offset;
+ /* Put the address of the phy, and the register
+ * number into MIIMADD */
+ regbase->miimadd = (phyid << 8) | regnum;
/* Clear the command register, and wait */
regbase->miimcom = 0;
@@ -215,115 +267,169 @@ uint read_phy_reg(tsec_t *regbase, uint phyid, uint offset)
return value;
}
-/* Setup the PHY */
-static void init_phy(tsec_t *regs)
+
+/* Discover which PHY is attached to the device, and configure it
+ * properly. If the PHY is not recognized, then return 0
+ * (failure). Otherwise, return 1
+ */
+static int init_phy(struct eth_device *dev)
{
- uint testval;
- unsigned int timeout = TSEC_TIMEOUT;
+ struct tsec_private *priv = (struct tsec_private *)dev->priv;
+ struct phy_info *curphy;
/* Assign a Physical address to the TBI */
- regs->tbipa=TBIPA_VALUE;
+ priv->regs->tbipa=TBIPA_VALUE;
- /* reset the management interface */
- regs->miimcfg=MIIMCFG_RESET;
+ if(0 == relocated)
+ relocate_cmds();
- regs->miimcfg=MIIMCFG_INIT_VALUE;
+ /* Get the cmd structure corresponding to the attached
+ * PHY */
+ curphy = get_phy_info(dev);
- /* Wait until the bus is free */
- while(regs->miimind & MIIMIND_BUSY);
+ if(NULL == curphy) {
+ printf("%s: No PHY found\n", dev->name);
-#ifdef CONFIG_PHY_CIS8201
- /* override PHY config settings */
- write_phy_reg(regs, 0, MIIM_AUX_CONSTAT, MIIM_AUXCONSTAT_INIT);
+ return 0;
+ }
- /* Set up interface mode */
- write_phy_reg(regs, 0, MIIM_EXT_CON1, MIIM_EXTCON1_INIT);
-#endif
+ priv->phyinfo = curphy;
- /* Set the PHY to gigabit, full duplex, Auto-negotiate */
- write_phy_reg(regs, phy_id, MIIM_CONTROL, MIIM_CONTROL_INIT);
+ phy_run_commands(priv, priv->phyinfo->config);
- /* Wait until STATUS indicates Auto-Negotiation is done */
- DBGPRINT("Waiting for Auto-negotiation to complete\n");
- testval=read_phy_reg(regs, phy_id, MIIM_STATUS);
+ return 1;
+}
- while((!(testval & MIIM_STATUS_AN_DONE))&& timeout--) {
- testval=read_phy_reg(regs, phy_id, MIIM_STATUS);
- }
- if(testval & MIIM_STATUS_AN_DONE)
- DBGPRINT("Auto-negotiation done\n");
+/* Returns which value to write to the control register. */
+/* For 10/100, the value is slightly different */
+uint mii_cr_init(uint mii_reg, struct tsec_private *priv)
+{
+ if(priv->gigabit)
+ return MIIM_CONTROL_INIT;
else
- DBGPRINT("Auto-negotiation timed-out.\n");
+ return MIIM_CR_INIT;
+}
-#ifdef CONFIG_PHY_CIS8201
- /* Find out what duplexity (duplicity?) we have */
- /* Read it twice to make sure */
- testval=read_phy_reg(regs, phy_id, MIIM_AUX_CONSTAT);
- if(testval & MIIM_AUXCONSTAT_DUPLEX) {
- DBGPRINT("Enet starting in full duplex\n");
- regs->maccfg2 |= MACCFG2_FULL_DUPLEX;
- } else {
- DBGPRINT("Enet starting in half duplex\n");
- regs->maccfg2 &= ~MACCFG2_FULL_DUPLEX;
- }
+/* Parse the status register for link, and then do
+ * auto-negotiation */
+uint mii_parse_sr(uint mii_reg, struct tsec_private *priv)
+{
+ uint timeout = TSEC_TIMEOUT;
- /* Also, we look to see what speed we are at
- * if Gigabit, MACCFG2 goes in GMII, otherwise,
- * MII mode.
- */
- if((testval & MIIM_AUXCONSTAT_SPEED) != MIIM_AUXCONSTAT_GBIT) {
- if((testval & MIIM_AUXCONSTAT_SPEED) == MIIM_AUXCONSTAT_100)
- DBGPRINT("Enet starting in 100BT\n");
- else
- DBGPRINT("Enet starting in 10BT\n");
+ if(mii_reg & MIIM_STATUS_LINK)
+ priv->link = 1;
+ else
+ priv->link = 0;
- /* mark the mode in MACCFG2 */
- regs->maccfg2 = ((regs->maccfg2&~(MACCFG2_IF)) | MACCFG2_MII);
- } else {
- DBGPRINT("Enet starting in 1000BT\n");
+ if(priv->link) {
+ while((!(mii_reg & MIIM_STATUS_AN_DONE)) && timeout--)
+ mii_reg = read_phy_reg(priv, MIIM_STATUS);
}
-#endif
+ return 0;
+}
-#ifdef CONFIG_PHY_M88E1011
- /* Read the PHY to see what speed and duplex we are */
- testval=read_phy_reg(regs, phy_id, MIIM_PHY_STATUS);
- timeout = TSEC_TIMEOUT;
- while((!(testval & MIIM_PHYSTAT_SPDDONE)) && timeout--) {
- testval = read_phy_reg(regs,phy_id,MIIM_PHY_STATUS);
+/* Parse the 88E1011's status register for speed and duplex
+ * information */
+uint mii_parse_88E1011_psr(uint mii_reg, struct tsec_private *priv)
+{
+ uint speed;
+
+ if(mii_reg & MIIM_88E1011_PHYSTAT_DUPLEX)
+ priv->duplexity = 1;
+ else
+ priv->duplexity = 0;
+
+ speed = (mii_reg &MIIM_88E1011_PHYSTAT_SPEED);
+
+ switch(speed) {
+ case MIIM_88E1011_PHYSTAT_GBIT:
+ priv->speed = 1000;
+ break;
+ case MIIM_88E1011_PHYSTAT_100:
+ priv->speed = 100;
+ break;
+ default:
+ priv->speed = 10;
}
- if(!(testval & MIIM_PHYSTAT_SPDDONE))
- DBGPRINT("Enet: Speed not resolved\n");
+ return 0;
+}
- testval=read_phy_reg(regs, phy_id, MIIM_PHY_STATUS);
- if(testval & MIIM_PHYSTAT_DUPLEX) {
- DBGPRINT("Enet starting in Full Duplex\n");
- regs->maccfg2 |= MACCFG2_FULL_DUPLEX;
- } else {
- DBGPRINT("Enet starting in Half Duplex\n");
- regs->maccfg2 &= ~MACCFG2_FULL_DUPLEX;
+
+/* Parse the cis8201's status register for speed and duplex
+ * information */
+uint mii_parse_cis8201(uint mii_reg, struct tsec_private *priv)
+{
+ uint speed;
+
+ if(mii_reg & MIIM_CIS8201_AUXCONSTAT_DUPLEX)
+ priv->duplexity = 1;
+ else
+ priv->duplexity = 0;
+
+ speed = mii_reg & MIIM_CIS8201_AUXCONSTAT_SPEED;
+ switch(speed) {
+ case MIIM_CIS8201_AUXCONSTAT_GBIT:
+ priv->speed = 1000;
+ break;
+ case MIIM_CIS8201_AUXCONSTAT_100:
+ priv->speed = 100;
+ break;
+ default:
+ priv->speed = 10;
+ break;
}
- if(!((testval&MIIM_PHYSTAT_SPEED) == MIIM_PHYSTAT_GBIT)) {
- if((testval & MIIM_PHYSTAT_SPEED) == MIIM_PHYSTAT_100)
- DBGPRINT("Enet starting in 100BT\n");
- else
- DBGPRINT("Enet starting in 10BT\n");
+ return 0;
+}
- regs->maccfg2 = ((regs->maccfg2&~(MACCFG2_IF)) | MACCFG2_MII);
- } else {
- DBGPRINT("Enet starting in 1000BT\n");
+
+/* Parse the DM9161's status register for speed and duplex
+ * information */
+uint mii_parse_dm9161_scsr(uint mii_reg, struct tsec_private *priv)
+{
+ if(mii_reg & (MIIM_DM9161_SCSR_100F | MIIM_DM9161_SCSR_100H))
+ priv->speed = 100;
+ else
+ priv->speed = 10;
+
+ if(mii_reg & (MIIM_DM9161_SCSR_100F | MIIM_DM9161_SCSR_10F))
+ priv->duplexity = 1;
+ else
+ priv->duplexity = 0;
+
+ return 0;
+}
+
+
+/* Hack to write all 4 PHYs with the LED values */
+uint mii_cis8204_fixled(uint mii_reg, struct tsec_private *priv)
+{
+ uint phyid;
+ volatile tsec_t *regbase = priv->phyregs;
+ int timeout=1000000;
+
+ for(phyid=0;phyid<4;phyid++) {
+ regbase->miimadd = (phyid << 8) | mii_reg;
+ regbase->miimcon = MIIM_CIS8204_SLEDCON_INIT;
+ asm("msync");
+
+ timeout=1000000;
+ while((regbase->miimind & MIIMIND_BUSY) && timeout--);
}
-#endif
+ return MIIM_CIS8204_SLEDCON_INIT;
}
-static void init_registers(tsec_t *regs)
+/* Initialized required registers to appropriate values, zeroing
+ * those we don't care about (unless zero is bad, in which case,
+ * choose a more appropriate value) */
+static void init_registers(volatile tsec_t *regs)
{
/* Clear IEVENT */
regs->ievent = IEVENT_INIT_CLEAR;
@@ -365,9 +471,51 @@ static void init_registers(tsec_t *regs)
}
-static void startup_tsec(tsec_t *regs)
+
+/* Configure maccfg2 based on negotiated speed and duplex
+ * reported by PHY handling code */
+static void adjust_link(struct eth_device *dev)
+{
+ struct tsec_private *priv = (struct tsec_private *)dev->priv;
+ volatile tsec_t *regs = priv->regs;
+
+ if(priv->link) {
+ if(priv->duplexity != 0)
+ regs->maccfg2 |= MACCFG2_FULL_DUPLEX;
+ else
+ regs->maccfg2 &= ~(MACCFG2_FULL_DUPLEX);
+
+ switch(priv->speed) {
+ case 1000:
+ regs->maccfg2 = ((regs->maccfg2&~(MACCFG2_IF))
+ | MACCFG2_GMII);
+ break;
+ case 100:
+ case 10:
+ regs->maccfg2 = ((regs->maccfg2&~(MACCFG2_IF))
+ | MACCFG2_MII);
+ break;
+ default:
+ printf("%s: Speed was bad\n", dev->name);
+ break;
+ }
+
+ printf("Speed: %d, %s duplex\n", priv->speed,
+ (priv->duplexity) ? "full" : "half");
+
+ } else {
+ printf("%s: No link.\n", dev->name);
+ }
+}
+
+
+/* Set up the buffers and their descriptors, and bring up the
+ * interface */
+static void startup_tsec(struct eth_device *dev)
{
int i;
+ struct tsec_private *priv = (struct tsec_private *)dev->priv;
+ volatile tsec_t *regs = priv->regs;
/* Point to the buffer descriptors */
regs->tbase = (unsigned int)(&rtx.txbd[txIdx]);
@@ -389,6 +537,10 @@ static void startup_tsec(tsec_t *regs)
}
rtx.txbd[TX_BUF_CNT -1].status |= TXBD_WRAP;
+ /* Start up the PHY */
+ phy_run_commands(priv, priv->phyinfo->startup);
+ adjust_link(dev);
+
/* Enable Transmit and Receive */
regs->maccfg1 |= (MACCFG1_RX_EN | MACCFG1_TX_EN);
@@ -406,12 +558,13 @@ static int tsec_send(struct eth_device* dev, volatile void *packet, int length)
{
int i;
int result = 0;
- tsec_t * regs = (tsec_t *)(TSEC_BASE_ADDR);
+ struct tsec_private *priv = (struct tsec_private *)dev->priv;
+ volatile tsec_t *regs = priv->regs;
/* Find an empty buffer descriptor */
for(i=0; rtx.txbd[txIdx].status & TXBD_READY; i++) {
if (i >= TOUT_LOOP) {
- DBGPRINT("tsec: tx buffers full\n");
+ DBGPRINT("%s: tsec: tx buffers full\n", dev->name);
return result;
}
}
@@ -426,7 +579,7 @@ static int tsec_send(struct eth_device* dev, volatile void *packet, int length)
/* Wait for buffer to be transmitted */
for(i=0; rtx.txbd[txIdx].status & TXBD_READY; i++) {
if (i >= TOUT_LOOP) {
- DBGPRINT("tsec: tx error\n");
+ DBGPRINT("%s: tsec: tx error\n", dev->name);
return result;
}
}
@@ -440,7 +593,8 @@ static int tsec_send(struct eth_device* dev, volatile void *packet, int length)
static int tsec_recv(struct eth_device* dev)
{
int length;
- tsec_t *regs = (tsec_t *)(TSEC_BASE_ADDR);
+ struct tsec_private *priv = (struct tsec_private *)dev->priv;
+ volatile tsec_t *regs = priv->regs;
while(!(rtx.rxbd[rxIdx].status & RXBD_EMPTY)) {
@@ -449,6 +603,9 @@ static int tsec_recv(struct eth_device* dev)
/* Send the packet up if there were no errors */
if (!(rtx.rxbd[rxIdx].status & RXBD_STATS)) {
NetReceive(NetRxPackets[rxIdx], length - 4);
+ } else {
+ printf("Got error %x\n",
+ (rtx.rxbd[rxIdx].status & RXBD_STATS));
}
rtx.rxbd[rxIdx].length = 0;
@@ -469,9 +626,11 @@ static int tsec_recv(struct eth_device* dev)
}
+/* Stop the interface */
static void tsec_halt(struct eth_device* dev)
{
- tsec_t *regs = (tsec_t *)(TSEC_BASE_ADDR);
+ struct tsec_private *priv = (struct tsec_private *)dev->priv;
+ volatile tsec_t *regs = priv->regs;
regs->dmactrl &= ~(DMACTRL_GRS | DMACTRL_GTS);
regs->dmactrl |= (DMACTRL_GRS | DMACTRL_GTS);
@@ -480,25 +639,288 @@ static void tsec_halt(struct eth_device* dev)
regs->maccfg1 &= ~(MACCFG1_TX_EN | MACCFG1_RX_EN);
+ /* Shut down the PHY, as needed */
+ phy_run_commands(priv, priv->phyinfo->shutdown);
+}
+
+
+struct phy_info phy_info_M88E1011S = {
+ 0x01410c6,
+ "Marvell 88E1011S",
+ 4,
+ (struct phy_cmd[]) { /* config */
+ /* Reset and configure the PHY */
+ {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
+ {0x1d, 0x1f, NULL},
+ {0x1e, 0x200c, NULL},
+ {0x1d, 0x5, NULL},
+ {0x1e, 0x0, NULL},
+ {0x1e, 0x100, NULL},
+ {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
+ {MIIM_ANAR, MIIM_ANAR_INIT, NULL},
+ {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
+ {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
+ {miim_end,}
+ },
+ (struct phy_cmd[]) { /* startup */
+ /* Status is read once to clear old link state */
+ {MIIM_STATUS, miim_read, NULL},
+ /* Auto-negotiate */
+ {MIIM_STATUS, miim_read, &mii_parse_sr},
+ /* Read the status */
+ {MIIM_88E1011_PHY_STATUS, miim_read, &mii_parse_88E1011_psr},
+ {miim_end,}
+ },
+ (struct phy_cmd[]) { /* shutdown */
+ {miim_end,}
+ },
+};
+
+struct phy_info phy_info_cis8204 = {
+ 0x3f11,
+ "Cicada Cis8204",
+ 6,
+ (struct phy_cmd[]) { /* config */
+ /* Override PHY config settings */
+ {MIIM_CIS8201_AUX_CONSTAT, MIIM_CIS8201_AUXCONSTAT_INIT, NULL},
+ /* Configure some basic stuff */
+ {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
+ {MIIM_CIS8204_SLED_CON, MIIM_CIS8204_SLEDCON_INIT, &mii_cis8204_fixled},
+ {MIIM_CIS8204_EPHY_CON, MIIM_CIS8204_EPHYCON_INIT, NULL},
+ {miim_end,}
+ },
+ (struct phy_cmd[]) { /* startup */
+ /* Read the Status (2x to make sure link is right) */
+ {MIIM_STATUS, miim_read, NULL},
+ /* Auto-negotiate */
+ {MIIM_STATUS, miim_read, &mii_parse_sr},
+ /* Read the status */
+ {MIIM_CIS8201_AUX_CONSTAT, miim_read, &mii_parse_cis8201},
+ {miim_end,}
+ },
+ (struct phy_cmd[]) { /* shutdown */
+ {miim_end,}
+ },
+};
+
+/* Cicada 8201 */
+struct phy_info phy_info_cis8201 = {
+ 0xfc41,
+ "CIS8201",
+ 4,
+ (struct phy_cmd[]) { /* config */
+ /* Override PHY config settings */
+ {MIIM_CIS8201_AUX_CONSTAT, MIIM_CIS8201_AUXCONSTAT_INIT, NULL},
+ /* Set up the interface mode */
+ {MIIM_CIS8201_EXT_CON1, MIIM_CIS8201_EXTCON1_INIT, NULL},
+ /* Configure some basic stuff */
+ {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
+ {miim_end,}
+ },
+ (struct phy_cmd[]) { /* startup */
+ /* Read the Status (2x to make sure link is right) */
+ {MIIM_STATUS, miim_read, NULL},
+ /* Auto-negotiate */
+ {MIIM_STATUS, miim_read, &mii_parse_sr},
+ /* Read the status */
+ {MIIM_CIS8201_AUX_CONSTAT, miim_read, &mii_parse_cis8201},
+ {miim_end,}
+ },
+ (struct phy_cmd[]) { /* shutdown */
+ {miim_end,}
+ },
+};
+
+
+struct phy_info phy_info_dm9161 = {
+ 0x0181b88,
+ "Davicom DM9161E",
+ 4,
+ (struct phy_cmd[]) { /* config */
+ {MIIM_CONTROL, MIIM_DM9161_CR_STOP, NULL},
+ /* Do not bypass the scrambler/descrambler */
+ {MIIM_DM9161_SCR, MIIM_DM9161_SCR_INIT, NULL},
+ /* Clear 10BTCSR to default */
+ {MIIM_DM9161_10BTCSR, MIIM_DM9161_10BTCSR_INIT, NULL},
+ /* Configure some basic stuff */
+ {MIIM_CONTROL, MIIM_CR_INIT, NULL},
+ /* Restart Auto Negotiation */
+ {MIIM_CONTROL, MIIM_DM9161_CR_RSTAN, NULL},
+ {miim_end,}
+ },
+ (struct phy_cmd[]) { /* startup */
+ /* Status is read once to clear old link state */
+ {MIIM_STATUS, miim_read, NULL},
+ /* Auto-negotiate */
+ {MIIM_STATUS, miim_read, &mii_parse_sr},
+ /* Read the status */
+ {MIIM_DM9161_SCSR, miim_read, &mii_parse_dm9161_scsr},
+ {miim_end,}
+ },
+ (struct phy_cmd[]) { /* shutdown */
+ {miim_end,}
+ },
+};
+
+struct phy_info *phy_info[] = {
+#if 0
+ &phy_info_cis8201,
+#endif
+ &phy_info_cis8204,
+ &phy_info_M88E1011S,
+ &phy_info_dm9161,
+ NULL
+};
+
+
+/* Grab the identifier of the device's PHY, and search through
+ * all of the known PHYs to see if one matches. If so, return
+ * it, if not, return NULL */
+struct phy_info * get_phy_info(struct eth_device *dev)
+{
+ struct tsec_private *priv = (struct tsec_private *)dev->priv;
+ uint phy_reg, phy_ID;
+ int i;
+ struct phy_info *theInfo = NULL;
+
+ /* Grab the bits from PHYIR1, and put them in the upper half */
+ phy_reg = read_phy_reg(priv, MIIM_PHYIR1);
+ phy_ID = (phy_reg & 0xffff) << 16;
+
+ /* Grab the bits from PHYIR2, and put them in the lower half */
+ phy_reg = read_phy_reg(priv, MIIM_PHYIR2);
+ phy_ID |= (phy_reg & 0xffff);
+
+ /* loop through all the known PHY types, and find one that */
+ /* matches the ID we read from the PHY. */
+ for(i=0; phy_info[i]; i++) {
+ if(phy_info[i]->id == (phy_ID >> phy_info[i]->shift))
+ theInfo = phy_info[i];
+ }
+
+ if(theInfo == NULL)
+ {
+ printf("%s: PHY id %x is not supported!\n", dev->name, phy_ID);
+ return NULL;
+ } else {
+ printf("%s: PHY is %s (%x)\n", dev->name, theInfo->name,
+ phy_ID);
+ }
+
+ return theInfo;
}
+
+/* Execute the given series of commands on the given device's
+ * PHY, running functions as necessary*/
+void phy_run_commands(struct tsec_private *priv, struct phy_cmd *cmd)
+{
+ int i;
+ uint result;
+ volatile tsec_t *phyregs = priv->phyregs;
+
+ phyregs->miimcfg = MIIMCFG_RESET;
+
+ phyregs->miimcfg = MIIMCFG_INIT_VALUE;
+
+ while(phyregs->miimind & MIIMIND_BUSY);
+
+ for(i=0;cmd->mii_reg != miim_end;i++) {
+ if(cmd->mii_data == miim_read) {
+ result = read_phy_reg(priv, cmd->mii_reg);
+
+ if(cmd->funct != NULL)
+ (*(cmd->funct))(result, priv);
+
+ } else {
+ if(cmd->funct != NULL)
+ result = (*(cmd->funct))(cmd->mii_reg, priv);
+ else
+ result = cmd->mii_data;
+
+ write_phy_reg(priv, cmd->mii_reg, result);
+
+ }
+ cmd++;
+ }
+}
+
+
+/* Relocate the function pointers in the phy cmd lists */
+static void relocate_cmds(void)
+{
+ struct phy_cmd **cmdlistptr;
+ struct phy_cmd *cmd;
+ int i,j,k;
+ DECLARE_GLOBAL_DATA_PTR;
+
+ for(i=0; phy_info[i]; i++) {
+ /* First thing's first: relocate the pointers to the
+ * PHY command structures (the structs were done) */
+ phy_info[i] = (struct phy_info *) ((uint)phy_info[i]
+ + gd->reloc_off);
+ phy_info[i]->name += gd->reloc_off;
+ phy_info[i]->config =
+ (struct phy_cmd *)((uint)phy_info[i]->config
+ + gd->reloc_off);
+ phy_info[i]->startup =
+ (struct phy_cmd *)((uint)phy_info[i]->startup
+ + gd->reloc_off);
+ phy_info[i]->shutdown =
+ (struct phy_cmd *)((uint)phy_info[i]->shutdown
+ + gd->reloc_off);
+
+ cmdlistptr = &phy_info[i]->config;
+ j=0;
+ for(;cmdlistptr <= &phy_info[i]->shutdown;cmdlistptr++) {
+ k=0;
+ for(cmd=*cmdlistptr;cmd->mii_reg != miim_end;cmd++) {
+ /* Only relocate non-NULL pointers */
+ if(cmd->funct)
+ cmd->funct += gd->reloc_off;
+
+ k++;
+ }
+ j++;
+ }
+ }
+
+ relocated = 1;
+}
+
+
#ifndef CONFIG_BITBANGMII
+
+struct tsec_private * get_priv_for_phy(unsigned char phyaddr)
+{
+ int i;
+
+ for(i=0;i<MAXCONTROLLERS;i++) {
+ if(privlist[i]->phyaddr == phyaddr)
+ return privlist[i];
+ }
+
+ return NULL;
+}
+
/*
* Read a MII PHY register.
*
* Returns:
- * 0 on success
+ * 0 on success
*/
-int miiphy_read(unsigned char addr,
- unsigned char reg,
- unsigned short *value)
+int miiphy_read(unsigned char addr, unsigned char reg, unsigned short *value)
{
- tsec_t *regs;
- unsigned short rv;
+ unsigned short ret;
+ struct tsec_private *priv = get_priv_for_phy(addr);
+
+ if(NULL == priv) {
+ printf("Can't read PHY at address %d\n", addr);
+ return -1;
+ }
- regs = (tsec_t *)(TSEC_BASE_ADDR);
- rv = (unsigned short)read_phy_reg(regs, addr, reg);
- *value = rv;
+ ret = (unsigned short)read_phy_reg(priv, reg);
+ *value = ret;
return 0;
}
@@ -507,18 +929,22 @@ int miiphy_read(unsigned char addr,
* Write a MII PHY register.
*
* Returns:
- * 0 on success
+ * 0 on success
*/
-int miiphy_write(unsigned char addr,
- unsigned char reg,
- unsigned short value)
+int miiphy_write(unsigned char addr, unsigned char reg, unsigned short value)
{
- tsec_t *regs;
+ struct tsec_private *priv = get_priv_for_phy(addr);
+
+ if(NULL == priv) {
+ printf("Can't write PHY at address %d\n", addr);
+ return -1;
+ }
- regs = (tsec_t *)(TSEC_BASE_ADDR);
- write_phy_reg(regs, addr, reg, value);
+ write_phy_reg(priv, reg, value);
return 0;
}
+
#endif /* CONFIG_BITBANGMII */
+
#endif /* CONFIG_TSEC_ENET */