summaryrefslogtreecommitdiff
path: root/cpu/ppc4xx
diff options
context:
space:
mode:
Diffstat (limited to 'cpu/ppc4xx')
-rw-r--r--cpu/ppc4xx/44x_spd_ddr2.c27
-rw-r--r--cpu/ppc4xx/cpu_init.c16
2 files changed, 38 insertions, 5 deletions
diff --git a/cpu/ppc4xx/44x_spd_ddr2.c b/cpu/ppc4xx/44x_spd_ddr2.c
index 1c36324..c7ed161 100644
--- a/cpu/ppc4xx/44x_spd_ddr2.c
+++ b/cpu/ppc4xx/44x_spd_ddr2.c
@@ -2172,6 +2172,11 @@ static void program_memory_queue(unsigned long *dimm_populated,
unsigned long i;
unsigned long bank_0_populated = 0;
phys_size_t total_size = 0;
+#if defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
+ defined(CONFIG_460SX)
+ unsigned long val;
+#endif
/*------------------------------------------------------------------
* Reset the rank_base_address.
@@ -2249,17 +2254,31 @@ static void program_memory_queue(unsigned long *dimm_populated,
}
}
-#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+#if defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
+ defined(CONFIG_460SX)
+
/*
- * Enable high bandwidth access on 460EX/GT.
- * This should/could probably be done on other
- * PPC's too, like 440SPe.
+ * Enable high bandwidth access
* This is currently not used, but with this setup
* it is possible to use it later on in e.g. the Linux
* EMAC driver for performance gain.
*/
mtdcr(SDRAM_PLBADDULL, 0x00000000); /* MQ0_BAUL */
mtdcr(SDRAM_PLBADDUHB, 0x00000008); /* MQ0_BAUH */
+
+ /*
+ * Set optimal value for Memory Queue HB/LL Configuration registers
+ */
+
+ val = (mfdcr(SDRAM_CONF1HB) | SDRAM_CONF1HB_AAFR | SDRAM_CONF1HB_RPEN | SDRAM_CONF1HB_RFTE);
+ mtdcr(SDRAM_CONF1HB, val);
+
+ val = (mfdcr(SDRAM_CONF1LL) | SDRAM_CONF1LL_AAFR | SDRAM_CONF1LL_RPEN | SDRAM_CONF1LL_RFTE);
+ mtdcr(SDRAM_CONF1LL, val);
+
+ val = (mfdcr(SDRAM_CONFPATHB) | SDRAM_CONFPATHB_TPEN);
+ mtdcr(SDRAM_CONFPATHB, val);
#endif
}
diff --git a/cpu/ppc4xx/cpu_init.c b/cpu/ppc4xx/cpu_init.c
index e2d0402..281819a 100644
--- a/cpu/ppc4xx/cpu_init.c
+++ b/cpu/ppc4xx/cpu_init.c
@@ -138,7 +138,9 @@ void reconfigure_pll(u32 new_cpu_freq)
void
cpu_init_f (void)
{
-#if defined(CONFIG_WATCHDOG) || defined(CONFIG_440GX) || defined(CONFIG_460EX)
+#if defined(CONFIG_WATCHDOG) || defined(CONFIG_440GX) || defined(CONFIG_460EX) || \
+ defined(CONFIG_440SP) || defined(CONFIG_440SPE) || defined(CONFIG_405EX) || \
+ defined(CONFIG_460GT) || defined(CONFIG_460SX)
u32 val;
#endif
@@ -301,6 +303,18 @@ cpu_init_f (void)
val |= 0x400;
mtsdr(SDR0_USB2HOST_CFG, val);
#endif /* CONFIG_460EX */
+
+#if defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
+ defined(CONFIG_405EX) || defined(CONFIG_460SX)
+ /*
+ * Set PLB4 arbiter (Segment 0 and 1) to 4 deep pipeline read
+ */
+ val = (mfdcr(plb0_acr) & ~plb0_acr_rdp_mask) | plb0_acr_rdp_4deep;
+ mtdcr(plb0_acr, val);
+ val = (mfdcr(plb1_acr) & ~plb1_acr_rdp_mask) | plb1_acr_rdp_4deep;
+ mtdcr(plb1_acr, val);
+#endif /* CONFIG_440SP/SPE || CONFIG_460EX/GT || CONFIG_405EX */
}
/*