summaryrefslogtreecommitdiff
path: root/cpu/ppc4xx
diff options
context:
space:
mode:
Diffstat (limited to 'cpu/ppc4xx')
-rw-r--r--cpu/ppc4xx/4xx_enet.c9
-rw-r--r--cpu/ppc4xx/cpu_init.c15
-rw-r--r--cpu/ppc4xx/interrupts.c97
3 files changed, 36 insertions, 85 deletions
diff --git a/cpu/ppc4xx/4xx_enet.c b/cpu/ppc4xx/4xx_enet.c
index 01712b0..8a38335 100644
--- a/cpu/ppc4xx/4xx_enet.c
+++ b/cpu/ppc4xx/4xx_enet.c
@@ -169,12 +169,15 @@
* UIC. Only exception is 440GX where the EMAC interrupts are
* spread over two UIC's!
*/
+#if defined(CONFIG_440GX)
+#define UIC_BASE_MAL UIC1_DCR_BASE
+#define UIC_BASE_MAL_ERR UIC2_DCR_BASE
+#define UIC_BASE_EMAC UIC2_DCR_BASE
+#define UIC_BASE_EMAC_B UIC3_DCR_BASE
+#else
#define UIC_BASE_MAL (UIC0_DCR_BASE + (UIC_NR(VECNUM_MAL_TXEOB) * 0x10))
#define UIC_BASE_MAL_ERR (UIC0_DCR_BASE + (UIC_NR(VECNUM_MAL_SERR) * 0x10))
#define UIC_BASE_EMAC (UIC0_DCR_BASE + (UIC_NR(ETH_IRQ_NUM(0)) * 0x10))
-#if defined(CONFIG_440GX)
-#define UIC_BASE_EMAC_B (UIC0_DCR_BASE + (UIC_NR(ETH_IRQ_NUM(2)) * 0x10))
-#else
#define UIC_BASE_EMAC_B (UIC0_DCR_BASE + (UIC_NR(ETH_IRQ_NUM(0)) * 0x10))
#endif
diff --git a/cpu/ppc4xx/cpu_init.c b/cpu/ppc4xx/cpu_init.c
index ac64279..e2d0402 100644
--- a/cpu/ppc4xx/cpu_init.c
+++ b/cpu/ppc4xx/cpu_init.c
@@ -138,9 +138,10 @@ void reconfigure_pll(u32 new_cpu_freq)
void
cpu_init_f (void)
{
-#if defined(CONFIG_WATCHDOG) || defined(CONFIG_460EX)
+#if defined(CONFIG_WATCHDOG) || defined(CONFIG_440GX) || defined(CONFIG_460EX)
u32 val;
#endif
+
reconfigure_pll(CFG_PLL_RECONFIG);
#if (defined(CONFIG_405EP) || defined (CONFIG_405EX)) && !defined(CFG_4xx_GPIO_TABLE)
@@ -273,6 +274,18 @@ cpu_init_f (void)
reset_4xx_watchdog();
#endif /* CONFIG_WATCHDOG */
+#if defined(CONFIG_440GX)
+ /* Take the GX out of compatibility mode
+ * Travis Sawyer, 9 Mar 2004
+ * NOTE: 440gx user manual inconsistency here
+ * Compatibility mode and Ethernet Clock select are not
+ * correct in the manual
+ */
+ mfsdr(sdr_mfr, val);
+ val &= ~0x10000000;
+ mtsdr(sdr_mfr,val);
+#endif /* CONFIG_440GX */
+
#if defined(CONFIG_460EX)
/*
* Set SDR0_AHB_CFG[A2P_INCR4] (bit 24) and
diff --git a/cpu/ppc4xx/interrupts.c b/cpu/ppc4xx/interrupts.c
index 6dbd6d2..8215dc6 100644
--- a/cpu/ppc4xx/interrupts.c
+++ b/cpu/ppc4xx/interrupts.c
@@ -40,14 +40,8 @@
UIC_MASK(VECNUM_UIC2CI) | UIC_MASK(VECNUM_UIC2NCI) | \
UIC_MASK(VECNUM_UIC3CI) | UIC_MASK(VECNUM_UIC3NCI))
#elif (UIC_MAX > 2)
-#if defined(CONFIG_440GX)
-#define UICB0_ALL (UIC_MASK(VECNUM_UIC0CI) | UIC_MASK(VECNUM_UIC0NCI) | \
- UIC_MASK(VECNUM_UIC1CI) | UIC_MASK(VECNUM_UIC1NCI) | \
- UIC_MASK(VECNUM_UIC2CI) | UIC_MASK(VECNUM_UIC2NCI))
-#else
#define UICB0_ALL (UIC_MASK(VECNUM_UIC1CI) | UIC_MASK(VECNUM_UIC1NCI) | \
UIC_MASK(VECNUM_UIC2CI) | UIC_MASK(VECNUM_UIC2NCI))
-#endif
#elif (UIC_MAX > 1)
#define UICB0_ALL (UIC_MASK(VECNUM_UIC1CI) | UIC_MASK(VECNUM_UIC1NCI))
#else
@@ -70,10 +64,6 @@ static struct irq_action irq_vecs[UIC_MAX * 32];
u32 get_dcr(u16);
void set_dcr(u16, u32);
-#if (UIC_MAX > 1) && !defined(CONFIG_440GX)
-static void uic_cascade_interrupt(void *para);
-#endif
-
#if defined(CONFIG_440)
/* SPRN changed in 440 */
@@ -157,42 +147,19 @@ int interrupt_init_cpu (unsigned *decrementer_count)
*/
set_evpr(0x00000000);
-#if !defined(CONFIG_440GX)
#if (UIC_MAX > 1)
/* Install the UIC1 handlers */
- irq_install_handler(VECNUM_UIC1NCI, uic_cascade_interrupt, 0);
- irq_install_handler(VECNUM_UIC1CI, uic_cascade_interrupt, 0);
+ irq_install_handler(VECNUM_UIC1NCI, (void *)(void *)external_interrupt, 0);
+ irq_install_handler(VECNUM_UIC1CI, (void *)(void *)external_interrupt, 0);
#endif
#if (UIC_MAX > 2)
- irq_install_handler(VECNUM_UIC2NCI, uic_cascade_interrupt, 0);
- irq_install_handler(VECNUM_UIC2CI, uic_cascade_interrupt, 0);
+ irq_install_handler(VECNUM_UIC2NCI, (void *)(void *)external_interrupt, 0);
+ irq_install_handler(VECNUM_UIC2CI, (void *)(void *)external_interrupt, 0);
#endif
#if (UIC_MAX > 3)
- irq_install_handler(VECNUM_UIC3NCI, uic_cascade_interrupt, 0);
- irq_install_handler(VECNUM_UIC3CI, uic_cascade_interrupt, 0);
+ irq_install_handler(VECNUM_UIC3NCI, (void *)(void *)external_interrupt, 0);
+ irq_install_handler(VECNUM_UIC3CI, (void *)(void *)external_interrupt, 0);
#endif
-#else /* !defined(CONFIG_440GX) */
- /*
- * ToDo: Remove this 440GX special handling:
- * Move SDR0_MFR setup to cpu.c and use common code with UICB0
- * on 440GX. 2008-06-26, sr
- */
- /* Take the GX out of compatibility mode
- * Travis Sawyer, 9 Mar 2004
- * NOTE: 440gx user manual inconsistency here
- * Compatibility mode and Ethernet Clock select are not
- * correct in the manual
- */
- mfsdr(sdr_mfr, val);
- val &= ~0x10000000;
- mtsdr(sdr_mfr,val);
-
- /* Enable UIC interrupts via UIC Base Enable Register */
- mtdcr(uicb0sr, UICB0_ALL);
- mtdcr(uicb0er, UICB0_ALL);
- /* None are critical */
- mtdcr(uicb0cr, 0);
-#endif /* !defined(CONFIG_440GX) */
return (0);
}
@@ -243,22 +210,6 @@ static void uic_interrupt(u32 uic_base, int vec_base)
}
}
-#if (UIC_MAX > 1) && !defined(CONFIG_440GX)
-static void uic_cascade_interrupt(void *para)
-{
- external_interrupt(para);
-}
-#endif
-
-#if defined(CONFIG_440GX)
-/* 440GX uses base uic register */
-#define UIC_BMSR uicb0msr
-#define UIC_BSR uicb0sr
-#else
-#define UIC_BMSR uic0msr
-#define UIC_BSR uic0sr
-#endif
-
/*
* Handle external interrupts
*/
@@ -269,7 +220,7 @@ void external_interrupt(struct pt_regs *regs)
/*
* Read masked interrupt status register to determine interrupt source
*/
- uic_msr = mfdcr(UIC_BMSR);
+ uic_msr = mfdcr(uic0msr);
#if (UIC_MAX > 1)
if ((UIC_MASK(VECNUM_UIC1CI) & uic_msr) ||
@@ -289,20 +240,10 @@ void external_interrupt(struct pt_regs *regs)
uic_interrupt(UIC3_DCR_BASE, 96);
#endif
-#if defined(CONFIG_440)
-#if !defined(CONFIG_440GX)
if (uic_msr & ~(UICB0_ALL))
uic_interrupt(UIC0_DCR_BASE, 0);
-#else
- if ((UIC_MASK(VECNUM_UIC0CI) & uic_msr) ||
- (UIC_MASK(VECNUM_UIC0NCI) & uic_msr))
- uic_interrupt(UIC0_DCR_BASE, 0);
-#endif
-#else /* CONFIG_440 */
- uic_interrupt(UIC0_DCR_BASE, 0);
-#endif /* CONFIG_440 */
- mtdcr(UIC_BSR, uic_msr);
+ mtdcr(uic0sr, uic_msr);
return;
}
@@ -312,8 +253,6 @@ void external_interrupt(struct pt_regs *regs)
*/
void irq_install_handler(int vec, interrupt_handler_t * handler, void *arg)
{
- int i;
-
/*
* Print warning when replacing with a different irq vector
*/
@@ -324,20 +263,19 @@ void irq_install_handler(int vec, interrupt_handler_t * handler, void *arg)
irq_vecs[vec].handler = handler;
irq_vecs[vec].arg = arg;
- i = vec & 0x1f;
if ((vec >= 0) && (vec < 32))
- mtdcr(uicer, mfdcr(uicer) | (0x80000000 >> i));
+ mtdcr(uicer, mfdcr(uicer) | UIC_MASK(vec));
#if (UIC_MAX > 1)
else if ((vec >= 32) && (vec < 64))
- mtdcr(uic1er, mfdcr(uic1er) | (0x80000000 >> i));
+ mtdcr(uic1er, mfdcr(uic1er) | UIC_MASK(vec));
#endif
#if (UIC_MAX > 2)
else if ((vec >= 64) && (vec < 96))
- mtdcr(uic2er, mfdcr(uic2er) | (0x80000000 >> i));
+ mtdcr(uic2er, mfdcr(uic2er) | UIC_MASK(vec));
#endif
#if (UIC_MAX > 3)
else if (vec >= 96)
- mtdcr(uic3er, mfdcr(uic3er) | (0x80000000 >> i));
+ mtdcr(uic3er, mfdcr(uic3er) | UIC_MASK(vec));
#endif
debug("Install interrupt for vector %d ==> %p\n", vec, handler);
@@ -345,25 +283,22 @@ void irq_install_handler(int vec, interrupt_handler_t * handler, void *arg)
void irq_free_handler (int vec)
{
- int i;
-
debug("Free interrupt for vector %d ==> %p\n",
vec, irq_vecs[vec].handler);
- i = vec & 0x1f;
if ((vec >= 0) && (vec < 32))
- mtdcr(uicer, mfdcr(uicer) & ~(0x80000000 >> i));
+ mtdcr(uicer, mfdcr(uicer) & ~UIC_MASK(vec));
#if (UIC_MAX > 1)
else if ((vec >= 32) && (vec < 64))
- mtdcr(uic1er, mfdcr(uic1er) & ~(0x80000000 >> i));
+ mtdcr(uic1er, mfdcr(uic1er) & ~UIC_MASK(vec));
#endif
#if (UIC_MAX > 2)
else if ((vec >= 64) && (vec < 96))
- mtdcr(uic2er, mfdcr(uic2er) & ~(0x80000000 >> i));
+ mtdcr(uic2er, mfdcr(uic2er) & ~UIC_MASK(vec));
#endif
#if (UIC_MAX > 3)
else if (vec >= 96)
- mtdcr(uic3er, mfdcr(uic3er) & ~(0x80000000 >> i));
+ mtdcr(uic3er, mfdcr(uic3er) & ~UIC_MASK(vec));
#endif
irq_vecs[vec].handler = NULL;