summaryrefslogtreecommitdiff
path: root/cpu
diff options
context:
space:
mode:
Diffstat (limited to 'cpu')
-rw-r--r--cpu/pxa/start.S38
1 files changed, 19 insertions, 19 deletions
diff --git a/cpu/pxa/start.S b/cpu/pxa/start.S
index b922485..31f408d 100644
--- a/cpu/pxa/start.S
+++ b/cpu/pxa/start.S
@@ -57,7 +57,7 @@ _fiq: .word fiq
* Startup Code (reset vector)
*
* do important init only if we don't start from RAM!
- * - relocate armboot to ram
+ * - relocate armboot to RAM
* - setup stack
* - jump to second stage
*/
@@ -90,7 +90,7 @@ IRQ_STACK_START:
.globl FIQ_STACK_START
FIQ_STACK_START:
.word 0x0badc0de
-#endif
+#endif /* CONFIG_USE_IRQ */
/****************************************************************************/
@@ -100,18 +100,18 @@ FIQ_STACK_START:
/****************************************************************************/
reset:
- mrs r0,cpsr /* set the cpu to SVC32 mode */
+ mrs r0,cpsr /* set the CPU to SVC32 mode */
bic r0,r0,#0x1f /* (superviser mode, M=10011) */
orr r0,r0,#0x13
msr cpsr,r0
/*
* we do sys-critical inits only at reboot,
- * not when booting from ram!
+ * not when booting from RAM!
*/
#ifndef CONFIG_SKIP_LOWLEVEL_INIT
bl cpu_init_crit /* we do sys-critical inits */
-#endif
+#endif /* !CONFIG_SKIP_LOWLEVEL_INIT */
#ifndef CONFIG_SKIP_RELOCATE_UBOOT
relocate: /* relocate U-Boot to RAM */
@@ -130,7 +130,7 @@ copy_loop:
stmia r1!, {r3-r10} /* copy to target address [r1] */
cmp r0, r2 /* until source end addreee [r2] */
ble copy_loop
-#endif /* CONFIG_SKIP_RELOCATE_UBOOT */
+#endif /* !CONFIG_SKIP_RELOCATE_UBOOT */
/* Set up the stack */
stack_setup:
@@ -139,7 +139,7 @@ stack_setup:
sub r0, r0, #CFG_GBL_DATA_SIZE /* bdinfo */
#ifdef CONFIG_USE_IRQ
sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
-#endif
+#endif /* CONFIG_USE_IRQ */
sub sp, r0, #12 /* leave 3 words for abort-stack */
clear_bss:
@@ -172,11 +172,11 @@ _start_armboot: .word start_armboot
#undef OSCR
#undef OWER
#undef OIER
-#endif
+#endif /* CONFIG_PXA250 || CONFIG_CPU_MONAHANS */
#ifdef CONFIG_PXA250
#undef RCSR
#undef CCCR
-#endif
+#endif /* CONFIG_PXA250 */
/* Interrupt-Controller base address */
IC_BASE: .word 0x40d00000
@@ -197,18 +197,18 @@ OSTIMER_BASE: .word 0x40a00000
#ifdef CONFIG_CPU_MONAHANS
# ifndef CFG_MONAHANS_RUN_MODE_OSC_RATIO
# error "You have to define CFG_MONAHANS_RUN_MODE_OSC_RATIO!!"
-# endif
+# endif /* !CFG_MONAHANS_RUN_MODE_OSC_RATIO */
# ifndef CFG_MONAHANS_TURBO_RUN_MODE_RATIO
# define CFG_MONAHANS_TURBO_RUN_MODE_RATIO 0x1
-# endif
-#else /* ! CONFIG_CPU_MONAHANS */
+# endif /* !CFG_MONAHANS_TURBO_RUN_MODE_RATIO */
+#else /* !CONFIG_CPU_MONAHANS */
#ifdef CFG_CPUSPEED
CC_BASE: .word 0x41300000
#define CCCR 0x00
cpuspeed: .word CFG_CPUSPEED
-#else
+#else /* !CFG_CPUSPEED */
#error "You have to define CFG_CPUSPEED!!"
-#endif
+#endif /* CFG_CPUSPEED */
#endif /* CONFIG_CPU_MONAHANS */
/* takes care the CP15 update has taken place */
@@ -225,7 +225,7 @@ cpu_init_crit:
ldr r0, IC_BASE
mov r1, #0x00
str r1, [r0, #ICMR]
-#else
+#else /* CONFIG_CPU_MONAHANS */
/* Step 1 - Enable CP6 permission */
mrc p15, 0, r1, c15, c1, 0 @ read CPAR
orr r1, r1, #0x40
@@ -244,14 +244,14 @@ cpu_init_crit:
ldr r1, =CKENB
ldr r2, =(CKENB_6_IRQ)
str r2, [r1]
-#endif
+#endif /* !CONFIG_CPU_MONAHANS */
/* set clock speed */
#ifdef CONFIG_CPU_MONAHANS
ldr r0, =ACCR
ldr r1, =(((CFG_MONAHANS_TURBO_RUN_MODE_RATIO<<8) & ACCR_XN_MASK) | (CFG_MONAHANS_RUN_MODE_OSC_RATIO & ACCR_XL_MASK))
str r1, [r0]
-#else /* ! CONFIG_CPU_MONAHANS */
+#else /* !CONFIG_CPU_MONAHANS */
#ifdef CFG_CPUSPEED
ldr r0, CC_BASE
ldr r1, cpuspeed
@@ -451,7 +451,7 @@ fiq:
bl do_fiq /* effiction fiq_save_user_regs */
irq_restore_user_regs
-#else
+#else /* !CONFIG_USE_IRQ */
.align 5
irq:
@@ -465,7 +465,7 @@ fiq:
bad_save_user_regs
bl do_fiq
-#endif
+#endif /* CONFIG_USE_IRQ */
/****************************************************************************/
/* */