summaryrefslogtreecommitdiff
path: root/cpu
diff options
context:
space:
mode:
Diffstat (limited to 'cpu')
-rw-r--r--cpu/mpc85xx/cpu.c69
-rw-r--r--cpu/mpc85xx/cpu_init.c2
-rw-r--r--cpu/mpc85xx/pci.c8
-rw-r--r--cpu/mpc85xx/spd_sdram.c31
-rw-r--r--cpu/mpc85xx/speed.c44
-rw-r--r--cpu/mpc85xx/start.S16
6 files changed, 95 insertions, 75 deletions
diff --git a/cpu/mpc85xx/cpu.c b/cpu/mpc85xx/cpu.c
index 0507c47..63176d2 100644
--- a/cpu/mpc85xx/cpu.c
+++ b/cpu/mpc85xx/cpu.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2004 Freescale Semiconductor.
+ * Copyright 2004,2007 Freescale Semiconductor, Inc.
* (C) Copyright 2002, 2003 Motorola Inc.
* Xianghua Xiao (X.Xiao@motorola.com)
*
@@ -70,6 +70,15 @@ int checkcpu (void)
case SVR_8548_E:
puts("8548_E");
break;
+ case SVR_8544:
+ puts("8544");
+ break;
+ case SVR_8544_E:
+ puts("8544_E");
+ break;
+ case SVR_8568_E:
+ puts("8568_E");
+ break;
default:
puts("Unknown");
break;
@@ -112,7 +121,7 @@ int checkcpu (void)
#endif
clkdiv = lcrr & 0x0f;
if (clkdiv == 2 || clkdiv == 4 || clkdiv == 8) {
-#ifdef CONFIG_MPC8548
+#if defined(CONFIG_MPC8548) || defined(CONFIG_MPC8544)
/*
* Yes, the entire PQ38 family use the same
* bit-representation for twice the clock divider values.
@@ -140,16 +149,25 @@ int checkcpu (void)
int do_reset (cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[])
{
+ uint pvr;
+ uint ver;
+ pvr = get_pvr();
+ ver = PVR_VER(pvr);
+ if (ver & 1){
+ /* e500 v2 core has reset control register */
+ volatile unsigned int * rstcr;
+ rstcr = (volatile unsigned int *)(CFG_IMMR + 0xE00B0);
+ *rstcr = 0x2; /* HRESET_REQ */
+ }else{
/*
* Initiate hard reset in debug control register DBCR0
* Make sure MSR[DE] = 1
*/
- unsigned long val;
-
- val = mfspr(DBCR0);
- val |= 0x70000000;
- mtspr(DBCR0,val);
-
+ unsigned long val;
+ val = mfspr(DBCR0);
+ val |= 0x70000000;
+ mtspr(DBCR0,val);
+ }
return 1;
}
@@ -183,9 +201,9 @@ reset_85xx_watchdog(void)
* Clear TSR(WIS) bit by writing 1
*/
unsigned long val;
- val = mfspr(tsr);
- val |= 0x40000000;
- mtspr(tsr, val);
+ val = mfspr(SPRN_TSR);
+ val |= TSR_WIS;
+ mtspr(SPRN_TSR, val);
}
#endif /* CONFIG_WATCHDOG */
@@ -196,6 +214,7 @@ void dma_init(void) {
dma->satr0 = 0x02c40000;
dma->datr0 = 0x02c40000;
+ dma->sr0 = 0xfffffff; /* clear any errors */
asm("sync; isync; msync");
return;
}
@@ -210,6 +229,10 @@ uint dma_check(void) {
status = dma->sr0;
}
+ /* clear MR0[CS] channel start bit */
+ dma->mr0 &= 0x00000001;
+ asm("sync;isync;msync");
+
if (status != 0) {
printf ("DMA Error: status = %x\n", status);
}
@@ -245,6 +268,10 @@ ft_cpu_setup(void *blob, bd_t *bd)
if (p != NULL)
*p = cpu_to_be32(clock);
+ p = ft_get_prop(blob, "/qe@e0080000/" OF_CPU "/bus-frequency", &len);
+ if (p != NULL)
+ *p = cpu_to_be32(clock);
+
p = ft_get_prop(blob, "/" OF_SOC "/serial@4500/clock-frequency", &len);
if (p != NULL)
*p = cpu_to_be32(clock);
@@ -255,21 +282,41 @@ ft_cpu_setup(void *blob, bd_t *bd)
#if defined(CONFIG_MPC85XX_TSEC1)
p = ft_get_prop(blob, "/" OF_SOC "/ethernet@24000/mac-address", &len);
+ if (p)
+ memcpy(p, bd->bi_enetaddr, 6);
+
+ p = ft_get_prop(blob, "/" OF_SOC "/ethernet@24000/local-mac-address", &len);
+ if (p)
memcpy(p, bd->bi_enetaddr, 6);
#endif
#if defined(CONFIG_HAS_ETH1)
p = ft_get_prop(blob, "/" OF_SOC "/ethernet@25000/mac-address", &len);
+ if (p)
+ memcpy(p, bd->bi_enet1addr, 6);
+
+ p = ft_get_prop(blob, "/" OF_SOC "/ethernet@25000/local-mac-address", &len);
+ if (p)
memcpy(p, bd->bi_enet1addr, 6);
#endif
#if defined(CONFIG_HAS_ETH2)
p = ft_get_prop(blob, "/" OF_SOC "/ethernet@26000/mac-address", &len);
+ if (p)
+ memcpy(p, bd->bi_enet2addr, 6);
+
+ p = ft_get_prop(blob, "/" OF_SOC "/ethernet@26000/local-mac-address", &len);
+ if (p)
memcpy(p, bd->bi_enet2addr, 6);
#endif
#if defined(CONFIG_HAS_ETH3)
p = ft_get_prop(blob, "/" OF_SOC "/ethernet@27000/mac-address", &len);
+ if (p)
+ memcpy(p, bd->bi_enet3addr, 6);
+
+ p = ft_get_prop(blob, "/" OF_SOC "/ethernet@27000/local-mac-address", &len);
+ if (p)
memcpy(p, bd->bi_enet3addr, 6);
#endif
diff --git a/cpu/mpc85xx/cpu_init.c b/cpu/mpc85xx/cpu_init.c
index 9f4d36c..9517146 100644
--- a/cpu/mpc85xx/cpu_init.c
+++ b/cpu/mpc85xx/cpu_init.c
@@ -143,12 +143,10 @@ void cpu_init_f (void)
memctl->br1 = CFG_BR1_PRELIM;
#endif
-#if !defined(CONFIG_MPC85xx)
#if defined(CFG_BR2_PRELIM) && defined(CFG_OR2_PRELIM)
memctl->or2 = CFG_OR2_PRELIM;
memctl->br2 = CFG_BR2_PRELIM;
#endif
-#endif
#if defined(CFG_BR3_PRELIM) && defined(CFG_OR3_PRELIM)
memctl->or3 = CFG_OR3_PRELIM;
diff --git a/cpu/mpc85xx/pci.c b/cpu/mpc85xx/pci.c
index 84f839a..3c1a323 100644
--- a/cpu/mpc85xx/pci.c
+++ b/cpu/mpc85xx/pci.c
@@ -90,14 +90,14 @@ pci_mpc85xx_init(struct pci_controller *board_hose)
pcix->powbar1 = (CFG_PCI1_MEM_PHYS >> 12) & 0x000fffff;
pcix->powbear1 = 0x00000000;
pcix->powar1 = (POWAR_EN | POWAR_MEM_READ |
- POWAR_MEM_WRITE | POWAR_MEM_512M);
+ POWAR_MEM_WRITE | (__ilog2(CFG_PCI1_MEM_SIZE) - 1));
pcix->potar2 = (CFG_PCI1_IO_BASE >> 12) & 0x000fffff;
pcix->potear2 = 0x00000000;
pcix->powbar2 = (CFG_PCI1_IO_PHYS >> 12) & 0x000fffff;
pcix->powbear2 = 0x00000000;
pcix->powar2 = (POWAR_EN | POWAR_IO_READ |
- POWAR_IO_WRITE | POWAR_IO_1M);
+ POWAR_IO_WRITE | (__ilog2(CFG_PCI1_IO_SIZE) - 1));
pcix->pitar1 = 0x00000000;
pcix->piwbar1 = 0x00000000;
@@ -175,14 +175,14 @@ pci_mpc85xx_init(struct pci_controller *board_hose)
pcix2->powbar1 = (CFG_PCI2_MEM_PHYS >> 12) & 0x000fffff;
pcix2->powbear1 = 0x00000000;
pcix2->powar1 = (POWAR_EN | POWAR_MEM_READ |
- POWAR_MEM_WRITE | POWAR_MEM_512M);
+ POWAR_MEM_WRITE | (__ilog2(CFG_PCI2_MEM_SIZE) - 1));
pcix2->potar2 = (CFG_PCI2_IO_BASE >> 12) & 0x000fffff;
pcix2->potear2 = 0x00000000;
pcix2->powbar2 = (CFG_PCI2_IO_PHYS >> 12) & 0x000fffff;
pcix2->powbear2 = 0x00000000;
pcix2->powar2 = (POWAR_EN | POWAR_IO_READ |
- POWAR_IO_WRITE | POWAR_IO_1M);
+ POWAR_IO_WRITE | (__ilog2(CFG_PCI2_IO_SIZE) - 1));
pcix2->pitar1 = 0x00000000;
pcix2->piwbar1 = 0x00000000;
diff --git a/cpu/mpc85xx/spd_sdram.c b/cpu/mpc85xx/spd_sdram.c
index 6da5367..3777f49 100644
--- a/cpu/mpc85xx/spd_sdram.c
+++ b/cpu/mpc85xx/spd_sdram.c
@@ -263,13 +263,14 @@ spd_sdram(void)
}
/*
- * Adjust DDR II IO voltage biasing. It just makes it work.
+ * Adjust DDR II IO voltage biasing.
+ * Only 8548 rev 1 needs the fix
*/
- if (spd.mem_type == SPD_MEMTYPE_DDR2) {
- gur->ddrioovcr = (0
- | 0x80000000 /* Enable */
- | 0x10000000 /* VSEL to 1.8V */
- );
+ if ((SVR_VER(get_svr()) == SVR_8548_E) &&
+ (SVR_MJREV(get_svr()) == 1) &&
+ (spd.mem_type == SPD_MEMTYPE_DDR2)) {
+ gur->ddrioovcr = (0x80000000 /* Enable */
+ | 0x10000000);/* VSEL to 1.8V */
}
/*
@@ -786,14 +787,17 @@ spd_sdram(void)
* Is this an ECC DDR chip?
* But don't mess with it if the DDR controller will init mem.
*/
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
+#ifdef CONFIG_DDR_ECC
if (spd.config == 0x02) {
+#ifndef CONFIG_ECC_INIT_VIA_DDRCONTROLLER
ddr->err_disable = 0x0000000d;
+#endif
ddr->err_sbe = 0x00ff0000;
}
+
debug("DDR: err_disable = 0x%08x\n", ddr->err_disable);
debug("DDR: err_sbe = 0x%08x\n", ddr->err_sbe);
-#endif
+#endif /* CONFIG_DDR_ECC */
asm("sync;isync;msync");
udelay(500);
@@ -991,17 +995,24 @@ setup_laws_and_tlbs(unsigned int memsize)
break;
case 256:
case 512:
+ tlb_size = BOOKE_PAGESZ_256M;
+ break;
case 1024:
case 2048:
- tlb_size = BOOKE_PAGESZ_256M;
+ if (PVR_VER(get_pvr()) > PVR_VER(PVR_85xx))
+ tlb_size = BOOKE_PAGESZ_1G;
+ else
+ tlb_size = BOOKE_PAGESZ_256M;
break;
default:
puts("DDR: only 16M,32M,64M,128M,256M,512M,1G and 2G are supported.\n");
/*
* The memory was not able to be mapped.
+ * Default to a small size.
*/
- return 0;
+ tlb_size = BOOKE_PAGESZ_64M;
+ memsize=64;
break;
}
diff --git a/cpu/mpc85xx/speed.c b/cpu/mpc85xx/speed.c
index ca81ee7..12359a2 100644
--- a/cpu/mpc85xx/speed.c
+++ b/cpu/mpc85xx/speed.c
@@ -37,49 +37,21 @@ void get_sys_info (sys_info_t * sysInfo)
{
volatile immap_t *immap = (immap_t *)CFG_IMMR;
volatile ccsr_gur_t *gur = &immap->im_gur;
- uint plat_ratio,e500_ratio;
+ uint plat_ratio,e500_ratio,half_freqSystemBus;
plat_ratio = (gur->porpllsr) & 0x0000003e;
plat_ratio >>= 1;
- switch(plat_ratio) {
- case 0x02:
- case 0x03:
- case 0x04:
- case 0x05:
- case 0x06:
- case 0x08:
- case 0x09:
- case 0x0a:
- case 0x0c:
- case 0x10:
- sysInfo->freqSystemBus = plat_ratio * CONFIG_SYS_CLK_FREQ;
- break;
- default:
- sysInfo->freqSystemBus = 0;
- break;
- }
-
+ sysInfo->freqSystemBus = plat_ratio * CONFIG_SYS_CLK_FREQ;
e500_ratio = (gur->porpllsr) & 0x003f0000;
e500_ratio >>= 16;
- switch(e500_ratio) {
- case 0x04:
- sysInfo->freqProcessor = 2*sysInfo->freqSystemBus;
- break;
- case 0x05:
- sysInfo->freqProcessor = 5*sysInfo->freqSystemBus/2;
- break;
- case 0x06:
- sysInfo->freqProcessor = 3*sysInfo->freqSystemBus;
- break;
- case 0x07:
- sysInfo->freqProcessor = 7*sysInfo->freqSystemBus/2;
- break;
- default:
- sysInfo->freqProcessor = 0;
- break;
- }
+
+ /* Divide before multiply to avoid integer
+ * overflow for processor speeds above 2GHz */
+ half_freqSystemBus = sysInfo->freqSystemBus/2;
+ sysInfo->freqProcessor = e500_ratio*half_freqSystemBus;
}
+
int get_clocks (void)
{
sys_info_t sys_info;
diff --git a/cpu/mpc85xx/start.S b/cpu/mpc85xx/start.S
index f96a4c3..20c7ebc 100644
--- a/cpu/mpc85xx/start.S
+++ b/cpu/mpc85xx/start.S
@@ -251,13 +251,10 @@ _start_e500:
*/
bl tlb1_entry
mr r5,r0
- li r1,0x0020 /* max 16 TLB1 plus some TLB0 entries */
- mtctr r1
lwzu r4,0(r5) /* how many TLB1 entries we actually use */
+ mtctr r4
-0: cmpwi r4,0
- beq 1f
- lwzu r0,4(r5)
+0: lwzu r0,4(r5)
lwzu r1,4(r5)
lwzu r2,4(r5)
lwzu r3,4(r5)
@@ -269,7 +266,6 @@ _start_e500:
msync
tlbwe
isync
- addi r4,r4,-1
bdnz 0b
1:
@@ -301,20 +297,16 @@ _start_e500:
bl law_entry
mr r6,r0
- li r1,0x0007 /* 8 LAWs, but reserve one for boot-over-rio-or-pci */
- mtctr r1
lwzu r5,0(r6) /* how many windows we actually use */
+ mtctr r5
li r2,0x0c28 /* the first pair is reserved for boot-over-rio-or-pci */
li r1,0x0c30
-0: cmpwi r5,0
- beq 1f
- lwzu r4,4(r6)
+0: lwzu r4,4(r6)
lwzu r3,4(r6)
stwx r4,r7,r2
stwx r3,r7,r1
- addi r5,r5,-1
addi r2,r2,0x0020
addi r1,r1,0x0020
bdnz 0b