summaryrefslogtreecommitdiff
path: root/cpu
diff options
context:
space:
mode:
Diffstat (limited to 'cpu')
-rw-r--r--cpu/ppc4xx/405gp_enet.c1062
-rw-r--r--cpu/ppc4xx/4xx_enet.c (renamed from cpu/ppc4xx/440gx_enet.c)302
-rw-r--r--cpu/ppc4xx/Makefile4
-rw-r--r--cpu/ppc4xx/cpu_init.c2
-rw-r--r--cpu/ppc4xx/miiphy.c209
-rw-r--r--cpu/ppc4xx/miiphy_440.c259
6 files changed, 354 insertions, 1484 deletions
diff --git a/cpu/ppc4xx/405gp_enet.c b/cpu/ppc4xx/405gp_enet.c
deleted file mode 100644
index 968f0ce..0000000
--- a/cpu/ppc4xx/405gp_enet.c
+++ /dev/null
@@ -1,1062 +0,0 @@
-/*-----------------------------------------------------------------------------+
- *
- * This source code has been made available to you by IBM on an AS-IS
- * basis. Anyone receiving this source is licensed under IBM
- * copyrights to use it in any way he or she deems fit, including
- * copying it, modifying it, compiling it, and redistributing it either
- * with or without modifications. No license under IBM patents or
- * patent applications is to be implied by the copyright license.
- *
- * Any user of this software should understand that IBM cannot provide
- * technical support for this software and will not be responsible for
- * any consequences resulting from the use of this software.
- *
- * Any person who transfers this source code or any derivative work
- * must include the IBM copyright notice, this paragraph, and the
- * preceding two paragraphs in the transferred software.
- *
- * COPYRIGHT I B M CORPORATION 1995
- * LICENSED MATERIAL - PROGRAM PROPERTY OF I B M
- *-----------------------------------------------------------------------------*/
-/*-----------------------------------------------------------------------------+
- *
- * File Name: enetemac.c
- *
- * Function: Device driver for the ethernet EMAC3 macro on the 405GP.
- *
- * Author: Mark Wisner
- *
- * Change Activity-
- *
- * Date Description of Change BY
- * --------- --------------------- ---
- * 05-May-99 Created MKW
- * 27-Jun-99 Clean up JWB
- * 16-Jul-99 Added MAL error recovery and better IP packet handling MKW
- * 29-Jul-99 Added Full duplex support MKW
- * 06-Aug-99 Changed names for Mal CR reg MKW
- * 23-Aug-99 Turned off SYE when running at 10Mbs MKW
- * 24-Aug-99 Marked descriptor empty after call_xlc MKW
- * 07-Sep-99 Set MAL RX buffer size reg to ENET_MAX_MTU_ALIGNED / 16 MCG
- * to avoid chaining maximum sized packets. Push starting
- * RX descriptor address up to the next cache line boundary.
- * 16-Jan-00 Added support for booting with IP of 0x0 MKW
- * 15-Mar-00 Updated enetInit() to enable broadcast addresses in the
- * EMAC_RXM register. JWB
- * 12-Mar-01 anne-sophie.harnois@nextream.fr
- * - Variables are compatible with those already defined in
- * include/net.h
- * - Receive buffer descriptor ring is used to send buffers
- * to the user
- * - Info print about send/received/handled packet number if
- * INFO_405_ENET is set
- * 17-Apr-01 stefan.roese@esd-electronics.com
- * - MAL reset in "eth_halt" included
- * - Enet speed and duplex output now in one line
- * 08-May-01 stefan.roese@esd-electronics.com
- * - MAL error handling added (eth_init called again)
- * 13-Nov-01 stefan.roese@esd-electronics.com
- * - Set IST bit in EMAC_M1 reg upon 100MBit or full duplex
- * 04-Jan-02 stefan.roese@esd-electronics.com
- * - Wait for PHY auto negotiation to complete added
- * 06-Feb-02 stefan.roese@esd-electronics.com
- * - Bug fixed in waiting for auto negotiation to complete
- * 26-Feb-02 stefan.roese@esd-electronics.com
- * - rx and tx buffer descriptors now allocated (no fixed address
- * used anymore)
- * 17-Jun-02 stefan.roese@esd-electronics.com
- * - MAL error debug printf 'M' removed (rx de interrupt may
- * occur upon many incoming packets with only 4 rx buffers).
- * 21-Nov-03 pavel.bartusek@sysgo.com
- * - set ZMII bridge speed on 440
- *
- *-----------------------------------------------------------------------------*/
-
-#include <common.h>
-#include <asm/processor.h>
-#include <ppc4xx.h>
-#include <commproc.h>
-#include <405gp_enet.h>
-#include <405_mal.h>
-#include <miiphy.h>
-#include <net.h>
-#include <malloc.h>
-#include "vecnum.h"
-
-#if defined(CONFIG_405GP) || defined(CONFIG_405EP) || \
- ( defined(CONFIG_440) && !defined(CONFIG_NET_MULTI))
-
-#if !defined(CONFIG_NET_MULTI) || !defined(CONFIG_405EP)
-/* 405GP, 440 with !CONFIG_NET_MULTI. For 440 only EMAC0 is supported */
-#define EMAC_NUM_DEV 1
-#else
-/* 440EP && CONFIG_NET_MULTI */
-#define EMAC_NUM_DEV 2
-#endif
-
-#define EMAC_RESET_TIMEOUT 1000 /* 1000 ms reset timeout */
-#define PHY_AUTONEGOTIATE_TIMEOUT 4000 /* 4000 ms autonegotiate timeout */
-
-/* Ethernet Transmit and Receive Buffers */
-/* AS.HARNOIS
- * In the same way ENET_MAX_MTU and ENET_MAX_MTU_ALIGNED are set from
- * PKTSIZE and PKTSIZE_ALIGN (include/net.h)
- */
-#define ENET_MAX_MTU PKTSIZE
-#define ENET_MAX_MTU_ALIGNED PKTSIZE_ALIGN
-
-/* define the number of channels implemented */
-#define EMAC_RXCHL EMAC_NUM_DEV
-#define EMAC_TXCHL EMAC_NUM_DEV
-
-/*-----------------------------------------------------------------------------+
- * Defines for MAL/EMAC interrupt conditions as reported in the UIC (Universal
- * Interrupt Controller).
- *-----------------------------------------------------------------------------*/
-#define MAL_UIC_ERR ( UIC_MAL_SERR | UIC_MAL_TXDE | UIC_MAL_RXDE)
-#define MAL_UIC_DEF (UIC_MAL_RXEOB | MAL_UIC_ERR)
-#define EMAC_UIC_DEF UIC_ENET
-#define EMAC_UIC_DEF1 UIC_ENET1
-#define SEL_UIC_DEF(p) (p ? UIC_ENET1 : UIC_ENET )
-
-
-/*-----------------------------------------------------------------------------+
- * Global variables. TX and RX descriptors and buffers.
- *-----------------------------------------------------------------------------*/
-/* IER globals */
-static uint32_t mal_ier;
-
-#if !defined(CONFIG_NET_MULTI)
-struct eth_device *emac0_dev;
-#endif
-
-/*-----------------------------------------------------------------------------+
- * Prototypes and externals.
- *-----------------------------------------------------------------------------*/
-static void enet_rcv (struct eth_device *dev, unsigned long malisr);
-
-int enetInt (struct eth_device *dev);
-static void mal_err (struct eth_device *dev, unsigned long isr,
- unsigned long uic, unsigned long maldef,
- unsigned long mal_errr);
-static void emac_err (struct eth_device *dev, unsigned long isr);
-
-/*-----------------------------------------------------------------------------+
-| ppc_405x_eth_halt
-| Disable MAL channel, and EMACn
-|
-|
-+-----------------------------------------------------------------------------*/
-static void ppc_4xx_eth_halt (struct eth_device *dev)
-{
- EMAC_405_HW_PST hw_p = dev->priv;
- uint32_t failsafe = 10000;
-
- mtdcr (malier, 0x00000000); /* disable mal interrupts */
- out32 (EMAC_IER + hw_p->hw_addr, 0x00000000); /* disable emac interrupts */
-
- /* 1st reset MAL channel */
- /* Note: writing a 0 to a channel has no effect */
- mtdcr (maltxcarr, (MAL_CR_MMSR >> (hw_p->devnum * 2)));
- mtdcr (malrxcarr, (MAL_CR_MMSR >> hw_p->devnum));
-
- /* wait for reset */
- while (mfdcr (malrxcasr) & (MAL_CR_MMSR >> hw_p->devnum)) {
- udelay (1000); /* Delay 1 MS so as not to hammer the register */
- failsafe--;
- if (failsafe == 0)
- break;
- }
-
- /* EMAC RESET */
- out32 (EMAC_M0 + hw_p->hw_addr, EMAC_M0_SRST);
-
- hw_p->print_speed = 1; /* print speed message again next time */
-
- return;
-}
-
-static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
-{
- int i;
- unsigned long reg;
- unsigned long msr;
- unsigned long speed;
- unsigned long duplex;
- unsigned long failsafe;
- unsigned mode_reg;
- unsigned short devnum;
- unsigned short reg_short;
-
- EMAC_405_HW_PST hw_p = dev->priv;
- /* before doing anything, figure out if we have a MAC address */
- /* if not, bail */
- if (memcmp (dev->enetaddr, "\0\0\0\0\0\0", 6) == 0)
- return -1;
-
- msr = mfmsr ();
- mtmsr (msr & ~(MSR_EE)); /* disable interrupts */
-
- devnum = hw_p->devnum;
-
-#ifdef INFO_405_ENET
- /* AS.HARNOIS
- * We should have :
- * hw_p->stats.pkts_handled <= hw_p->stats.pkts_rx <= hw_p->stats.pkts_handled+PKTBUFSRX
- * In the most cases hw_p->stats.pkts_handled = hw_p->stats.pkts_rx, but it
- * is possible that new packets (without relationship with
- * current transfer) have got the time to arrived before
- * netloop calls eth_halt
- */
- printf ("About preceeding transfer (eth%d):\n"
- "- Sent packet number %d\n"
- "- Received packet number %d\n"
- "- Handled packet number %d\n",
- hw_p->devnum,
- hw_p->stats.pkts_tx,
- hw_p->stats.pkts_rx, hw_p->stats.pkts_handled);
-
- hw_p->stats.pkts_tx = 0;
- hw_p->stats.pkts_rx = 0;
- hw_p->stats.pkts_handled = 0;
-#endif
-
- /* MAL RESET */
- mtdcr (malmcr, MAL_CR_MMSR);
- /* wait for reset */
- while (mfdcr (malmcr) & MAL_CR_MMSR) {
- };
-
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
- out32 (ZMII_FER, 0);
- udelay(100);
- /* set RII mode */
- out32 (ZMII_FER, ZMII_RMII | ZMII_MDI0);
-#elif defined(CONFIG_440)
- /* set RMII mode */
- out32 (ZMII_FER, ZMII_RMII | ZMII_MDI0);
-#endif /* CONFIG_440 */
-
- /* MAL Channel RESET */
- /* 1st reset MAL channel */
- /* Note: writing a 0 to a channel has no effect */
- mtdcr (maltxcarr, (MAL_TXRX_CASR >> (hw_p->devnum * 2)));
- mtdcr (malrxcarr, (MAL_TXRX_CASR >> hw_p->devnum));
-
- /* wait for reset */
- /* TBS: should have udelay and failsafe here */
- failsafe = 10000;
- /* wait for reset */
- while (mfdcr (malrxcasr) & (MAL_CR_MMSR >> hw_p->devnum)) {
- udelay (1000); /* Delay 1 MS so as not to hammer the register */
- failsafe--;
- if (failsafe == 0)
- break;
-
- }
-
- hw_p->tx_err_index = 0; /* Transmit Error Index for tx_err_log */
- hw_p->rx_err_index = 0; /* Receive Error Index for rx_err_log */
-
- hw_p->rx_slot = 0; /* MAL Receive Slot */
- hw_p->rx_i_index = 0; /* Receive Interrupt Queue Index */
- hw_p->rx_u_index = 0; /* Receive User Queue Index */
-
- hw_p->tx_slot = 0; /* MAL Transmit Slot */
- hw_p->tx_i_index = 0; /* Transmit Interrupt Queue Index */
- hw_p->tx_u_index = 0; /* Transmit User Queue Index */
-
- __asm__ volatile ("eieio");
-
- /* reset emac so we have access to the phy */
-
- out32 (EMAC_M0 + hw_p->hw_addr, EMAC_M0_SRST);
- __asm__ volatile ("eieio");
-
- failsafe = 1000;
- while ((in32 (EMAC_M0 + hw_p->hw_addr) & (EMAC_M0_SRST)) && failsafe) {
- udelay (1000);
- failsafe--;
- }
-
-#if defined(CONFIG_NET_MULTI)
- reg = hw_p->devnum ? CONFIG_PHY1_ADDR : CONFIG_PHY_ADDR;
-#else
- reg = CONFIG_PHY_ADDR;
-#endif
- /* wait for PHY to complete auto negotiation */
- reg_short = 0;
-#ifndef CONFIG_CS8952_PHY
- miiphy_read (reg, PHY_BMSR, &reg_short);
-
- /*
- * Wait if PHY is capable of autonegotiation and autonegotiation is not complete
- */
- if ((reg_short & PHY_BMSR_AUTN_ABLE)
- && !(reg_short & PHY_BMSR_AUTN_COMP)) {
- puts ("Waiting for PHY auto negotiation to complete");
- i = 0;
- while (!(reg_short & PHY_BMSR_AUTN_COMP)) {
- /*
- * Timeout reached ?
- */
- if (i > PHY_AUTONEGOTIATE_TIMEOUT) {
- puts (" TIMEOUT !\n");
- break;
- }
-
- if ((i++ % 1000) == 0) {
- putc ('.');
- }
- udelay (1000); /* 1 ms */
- miiphy_read (reg, PHY_BMSR, &reg_short);
- }
- puts (" done\n");
- udelay (500000); /* another 500 ms (results in faster booting) */
- }
-#endif
- speed = miiphy_speed (reg);
- duplex = miiphy_duplex (reg);
-
- if (hw_p->print_speed) {
- hw_p->print_speed = 0;
- printf ("ENET Speed is %d Mbps - %s duplex connection\n",
- (int) speed, (duplex == HALF) ? "HALF" : "FULL");
- }
-
- mtdcr (malmcr, MAL_CR_PLBB | MAL_CR_OPBBL | MAL_CR_LEA | MAL_CR_PLBLT_DEFAULT);
- /* Errata 1.12: MAL_1 -- Disable MAL bursting */
- if (get_pvr() == PVR_440GP_RB) {
- mtdcr (malmcr, mfdcr(malmcr) & ~MAL_CR_PLBB);
- }
-
- /* Free "old" buffers */
- if (hw_p->alloc_tx_buf)
- free (hw_p->alloc_tx_buf);
- if (hw_p->alloc_rx_buf)
- free (hw_p->alloc_rx_buf);
-
- /*
- * Malloc MAL buffer desciptors, make sure they are
- * aligned on cache line boundary size
- * (401/403/IOP480 = 16, 405 = 32)
- * and doesn't cross cache block boundaries.
- */
- hw_p->alloc_tx_buf =
- (mal_desc_t *) malloc ((sizeof (mal_desc_t) * NUM_TX_BUFF) +
- ((2 * CFG_CACHELINE_SIZE) - 2));
- if (((int) hw_p->alloc_tx_buf & CACHELINE_MASK) != 0) {
- hw_p->tx =
- (mal_desc_t *) ((int) hw_p->alloc_tx_buf +
- CFG_CACHELINE_SIZE -
- ((int) hw_p->
- alloc_tx_buf & CACHELINE_MASK));
- } else {
- hw_p->tx = hw_p->alloc_tx_buf;
- }
-
- hw_p->alloc_rx_buf =
- (mal_desc_t *) malloc ((sizeof (mal_desc_t) * NUM_RX_BUFF) +
- ((2 * CFG_CACHELINE_SIZE) - 2));
- if (((int) hw_p->alloc_rx_buf & CACHELINE_MASK) != 0) {
- hw_p->rx =
- (mal_desc_t *) ((int) hw_p->alloc_rx_buf +
- CFG_CACHELINE_SIZE -
- ((int) hw_p->
- alloc_rx_buf & CACHELINE_MASK));
- } else {
- hw_p->rx = hw_p->alloc_rx_buf;
- }
-
- for (i = 0; i < NUM_TX_BUFF; i++) {
- hw_p->tx[i].ctrl = 0;
- hw_p->tx[i].data_len = 0;
- if (hw_p->first_init == 0)
- hw_p->txbuf_ptr =
- (char *) malloc (ENET_MAX_MTU_ALIGNED);
- hw_p->tx[i].data_ptr = hw_p->txbuf_ptr;
- if ((NUM_TX_BUFF - 1) == i)
- hw_p->tx[i].ctrl |= MAL_TX_CTRL_WRAP;
- hw_p->tx_run[i] = -1;
-#if 0
- printf ("TX_BUFF %d @ 0x%08lx\n", i,
- (ulong) hw_p->tx[i].data_ptr);
-#endif
- }
-
- for (i = 0; i < NUM_RX_BUFF; i++) {
- hw_p->rx[i].ctrl = 0;
- hw_p->rx[i].data_len = 0;
- /* rx[i].data_ptr = (char *) &rx_buff[i]; */
- hw_p->rx[i].data_ptr = (char *) NetRxPackets[i];
- if ((NUM_RX_BUFF - 1) == i)
- hw_p->rx[i].ctrl |= MAL_RX_CTRL_WRAP;
- hw_p->rx[i].ctrl |= MAL_RX_CTRL_EMPTY | MAL_RX_CTRL_INTR;
- hw_p->rx_ready[i] = -1;
-#if 0
- printf ("RX_BUFF %d @ 0x%08lx\n", i, (ulong) rx[i].data_ptr);
-#endif
- }
-
- reg = 0x00000000;
- reg |= dev->enetaddr[0]; /* set high address */
- reg = reg << 8;
- reg |= dev->enetaddr[1];
-
- out32 (EMAC_IAH + hw_p->hw_addr, reg);
-
- reg = 0x00000000;
- reg |= dev->enetaddr[2]; /* set low address */
- reg = reg << 8;
- reg |= dev->enetaddr[3];
- reg = reg << 8;
- reg |= dev->enetaddr[4];
- reg = reg << 8;
- reg |= dev->enetaddr[5];
-
- out32 (EMAC_IAL + hw_p->hw_addr, reg);
-
- switch (devnum) {
-#if defined(CONFIG_NET_MULTI)
- case 1:
- /* setup MAL tx & rx channel pointers */
- /* For 405EP, the EMAC1 tx channel 0 is MAL tx channel 2 */
- mtdcr (maltxctp2r, hw_p->tx);
- mtdcr (malrxctp1r, hw_p->rx);
- /* set RX buffer size */
- mtdcr (malrcbs1, ENET_MAX_MTU_ALIGNED / 16);
- break;
-#endif
- case 0:
- default:
- /* setup MAL tx & rx channel pointers */
- mtdcr (maltxctp0r, hw_p->tx);
- mtdcr (malrxctp0r, hw_p->rx);
- /* set RX buffer size */
- mtdcr (malrcbs0, ENET_MAX_MTU_ALIGNED / 16);
- break;
- }
-
- /* Enable MAL transmit and receive channels */
- mtdcr (maltxcasr, (MAL_TXRX_CASR >> (hw_p->devnum * 2)));
- mtdcr (malrxcasr, (MAL_TXRX_CASR >> hw_p->devnum));
-
- /* set transmit enable & receive enable */
- out32 (EMAC_M0 + hw_p->hw_addr, EMAC_M0_TXE | EMAC_M0_RXE);
-
- /* set receive fifo to 4k and tx fifo to 2k */
- mode_reg = in32 (EMAC_M1 + hw_p->hw_addr);
- mode_reg |= EMAC_M1_RFS_4K | EMAC_M1_TX_FIFO_2K;
-
- /* set speed */
- if (speed == _100BASET)
- mode_reg = mode_reg | EMAC_M1_MF_100MBPS | EMAC_M1_IST;
- else
- mode_reg = mode_reg & ~0x00C00000; /* 10 MBPS */
- if (duplex == FULL)
- mode_reg = mode_reg | 0x80000000 | EMAC_M1_IST;
-
- out32 (EMAC_M1 + hw_p->hw_addr, mode_reg);
-
-#if defined(CONFIG_440)
- /* set speed in the ZMII bridge */
- if (speed == _100BASET)
- out32(ZMII_SSR, in32(ZMII_SSR) | 0x10000000);
- else
- out32(ZMII_SSR, in32(ZMII_SSR) & ~0x10000000);
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
- mfsdr(sdr_mfr, reg);
- /* set speed */
- if (speed == _100BASET) {
- out32(ZMII_SSR, in32(ZMII_SSR) | 0x10000000);
- reg = (reg & ~SDR0_MFR_ZMII_MODE_MASK) | SDR0_MFR_ZMII_MODE_RMII_100M;
- } else {
- reg = (reg & ~SDR0_MFR_ZMII_MODE_MASK) | SDR0_MFR_ZMII_MODE_RMII_10M;
- out32(ZMII_SSR, in32(ZMII_SSR) & ~0x10000000);
- }
- mtsdr(sdr_mfr, reg);
-#endif
-#endif
-
- /* Enable broadcast and indvidual address */
- /* TBS: enabling runts as some misbehaved nics will send runts */
- out32 (EMAC_RXM + hw_p->hw_addr, EMAC_RMR_BAE | EMAC_RMR_IAE);
-
- /* we probably need to set the tx mode1 reg? maybe at tx time */
-
- /* set transmit request threshold register */
- out32 (EMAC_TRTR + hw_p->hw_addr, 0x18000000); /* 256 byte threshold */
-
-#if defined(CONFIG_440)
- /* 440GP has a 64 byte burst length */
- out32 (EMAC_RX_HI_LO_WMARK + hw_p->hw_addr, 0x0f002000);
- out32 (EMAC_TXM1 + hw_p->hw_addr, 0xf8640000);
-#else
- /* 405s have a 16 byte burst length */
- out32 (EMAC_RX_HI_LO_WMARK + hw_p->hw_addr, 0x0f002000);
-#endif
-
- /* Frame gap set */
- out32 (EMAC_I_FRAME_GAP_REG + hw_p->hw_addr, 0x00000008);
-
- /* Set EMAC IER */
- hw_p->emac_ier = EMAC_ISR_PTLE | EMAC_ISR_BFCS |
- EMAC_ISR_ORE | EMAC_ISR_IRE;
- if (speed == _100BASET)
- hw_p->emac_ier = hw_p->emac_ier | EMAC_ISR_SYE;
-
- out32 (EMAC_ISR + hw_p->hw_addr, 0xffffffff); /* clear pending interrupts */
- out32 (EMAC_IER + hw_p->hw_addr, hw_p->emac_ier);
-
- if (hw_p->first_init == 0) {
- /*
- * Connect interrupt service routines
- */
- irq_install_handler (VECNUM_ETH0 + (hw_p->devnum * 2),
- (interrupt_handler_t *) enetInt, dev);
- }
-
- mtmsr (msr); /* enable interrupts again */
-
- hw_p->bis = bis;
- hw_p->first_init = 1;
-
- return (1);
-}
-
-
-static int ppc_4xx_eth_send (struct eth_device *dev, volatile void *ptr, int len)
-{
- struct enet_frame *ef_ptr;
- ulong time_start, time_now;
- unsigned long temp_txm0;
- EMAC_405_HW_PST hw_p = dev->priv;
-
- ef_ptr = (struct enet_frame *) ptr;
-
- /*-----------------------------------------------------------------------+
- * Copy in our address into the frame.
- *-----------------------------------------------------------------------*/
- (void) memcpy (ef_ptr->source_addr, dev->enetaddr, ENET_ADDR_LENGTH);
-
- /*-----------------------------------------------------------------------+
- * If frame is too long or too short, modify length.
- *-----------------------------------------------------------------------*/
- /* TBS: where does the fragment go???? */
- if (len > ENET_MAX_MTU)
- len = ENET_MAX_MTU;
-
- /* memcpy ((void *) &tx_buff[tx_slot], (const void *) ptr, len); */
- memcpy ((void *) hw_p->txbuf_ptr, (const void *) ptr, len);
-
- /*-----------------------------------------------------------------------+
- * set TX Buffer busy, and send it
- *-----------------------------------------------------------------------*/
- hw_p->tx[hw_p->tx_slot].ctrl = (MAL_TX_CTRL_LAST |
- EMAC_TX_CTRL_GFCS | EMAC_TX_CTRL_GP) &
- ~(EMAC_TX_CTRL_ISA | EMAC_TX_CTRL_RSA);
- if ((NUM_TX_BUFF - 1) == hw_p->tx_slot)
- hw_p->tx[hw_p->tx_slot].ctrl |= MAL_TX_CTRL_WRAP;
-
- hw_p->tx[hw_p->tx_slot].data_len = (short) len;
- hw_p->tx[hw_p->tx_slot].ctrl |= MAL_TX_CTRL_READY;
-
- __asm__ volatile ("eieio");
-
- out32 (EMAC_TXM0 + hw_p->hw_addr,
- in32 (EMAC_TXM0 + hw_p->hw_addr) | EMAC_TXM0_GNP0);
-#ifdef INFO_405_ENET
- hw_p->stats.pkts_tx++;
-#endif
-
- /*-----------------------------------------------------------------------+
- * poll unitl the packet is sent and then make sure it is OK
- *-----------------------------------------------------------------------*/
- time_start = get_timer (0);
- while (1) {
- temp_txm0 = in32 (EMAC_TXM0 + hw_p->hw_addr);
- /* loop until either TINT turns on or 3 seconds elapse */
- if ((temp_txm0 & EMAC_TXM0_GNP0) != 0) {
- /* transmit is done, so now check for errors
- * If there is an error, an interrupt should
- * happen when we return
- */
- time_now = get_timer (0);
- if ((time_now - time_start) > 3000) {
- return (-1);
- }
- } else {
- return (len);
- }
- }
-}
-
-#if defined(CONFIG_440)
-int enetInt (struct eth_device *dev)
-{
- int serviced;
- int rc = -1; /* default to not us */
- unsigned long mal_isr;
- unsigned long emac_isr = 0;
- unsigned long mal_rx_eob;
- unsigned long my_uic0msr, my_uic1msr;
- EMAC_405_HW_PST hw_p;
-
- /*
- * Because the mal is generic, we need to get the current
- * eth device
- */
-#if defined(CONFIG_NET_MULTI)
- dev = eth_get_dev();
-#else
- dev = emac0_dev;
-#endif
- hw_p = dev->priv;
-
- /* enter loop that stays in interrupt code until nothing to service */
- do {
- serviced = 0;
-
- my_uic0msr = mfdcr (uic0msr);
- my_uic1msr = mfdcr (uic1msr);
-
- if (!(my_uic0msr & UIC_MRE)
- && !(my_uic1msr & (UIC_ETH0 | UIC_MS | UIC_MTDE | UIC_MRDE))) {
- /* not for us */
- return (rc);
- }
-
- /* get and clear controller status interrupts */
- /* look at Mal and EMAC interrupts */
- if ((my_uic0msr & UIC_MRE)
- || (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE))) {
- /* we have a MAL interrupt */
- mal_isr = mfdcr (malesr);
- /* look for mal error */
- if (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE)) {
- mal_err (dev, mal_isr, my_uic0msr, MAL_UIC_DEF, MAL_UIC_ERR);
- serviced = 1;
- rc = 0;
- }
- }
- if (UIC_ETH0 & my_uic1msr) { /* look for EMAC errors */
- emac_isr = in32 (EMAC_ISR + hw_p->hw_addr);
- if ((hw_p->emac_ier & emac_isr) != 0) {
- emac_err (dev, emac_isr);
- serviced = 1;
- rc = 0;
- }
- }
- if ((hw_p->emac_ier & emac_isr)
- || (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE))) {
- mtdcr (uic0sr, UIC_MRE); /* Clear */
- mtdcr (uic1sr, UIC_ETH0 | UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */
- return (rc); /* we had errors so get out */
- }
-
- /* handle MAL RX EOB interupt from a receive */
- /* check for EOB on valid channels */
- if (my_uic0msr & UIC_MRE) {
- mal_rx_eob = mfdcr (malrxeobisr);
- if ((mal_rx_eob & (0x80000000 >> hw_p->devnum)) != 0) { /* call emac routine for channel 0 */
- /* clear EOB
- mtdcr(malrxeobisr, mal_rx_eob); */
- enet_rcv (dev, emac_isr);
- /* indicate that we serviced an interrupt */
- serviced = 1;
- rc = 0;
- }
- }
- mtdcr (uic0sr, UIC_MRE); /* Clear */
- mtdcr (uic1sr, UIC_ETH0 | UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */
- } while (serviced);
-
- return (rc);
-}
-
-#else /* CONFIG_440 */
-
-int enetInt (struct eth_device *dev)
-{
- int serviced;
- int rc = -1; /* default to not us */
- unsigned long mal_isr;
- unsigned long emac_isr = 0;
- unsigned long mal_rx_eob;
- unsigned long my_uicmsr;
-
- EMAC_405_HW_PST hw_p;
-
- /*
- * Because the mal is generic, we need to get the current
- * eth device
- */
-#if defined(CONFIG_NET_MULTI)
- dev = eth_get_dev();
-#else
- dev = emac0_dev;
-#endif
-
- hw_p = dev->priv;
-
- /* enter loop that stays in interrupt code until nothing to service */
- do {
- serviced = 0;
-
- my_uicmsr = mfdcr (uicmsr);
-
- if ((my_uicmsr & (MAL_UIC_DEF | EMAC_UIC_DEF)) == 0) { /* not for us */
- return (rc);
- }
- /* get and clear controller status interrupts */
- /* look at Mal and EMAC interrupts */
- if ((MAL_UIC_DEF & my_uicmsr) != 0) { /* we have a MAL interrupt */
- mal_isr = mfdcr (malesr);
- /* look for mal error */
- if ((my_uicmsr & MAL_UIC_ERR) != 0) {
- mal_err (dev, mal_isr, my_uicmsr, MAL_UIC_DEF, MAL_UIC_ERR);
- serviced = 1;
- rc = 0;
- }
- }
-
- /* port by port dispatch of emac interrupts */
-
- if ((SEL_UIC_DEF(hw_p->devnum) & my_uicmsr) != 0) { /* look for EMAC errors */
- emac_isr = in32 (EMAC_ISR + hw_p->hw_addr);
- if ((hw_p->emac_ier & emac_isr) != 0) {
- emac_err (dev, emac_isr);
- serviced = 1;
- rc = 0;
- }
- }
- if (((hw_p->emac_ier & emac_isr) != 0) || ((MAL_UIC_ERR & my_uicmsr) != 0)) {
- mtdcr (uicsr, MAL_UIC_DEF | SEL_UIC_DEF(hw_p->devnum)); /* Clear */
- return (rc); /* we had errors so get out */
- }
-
- /* handle MAX TX EOB interrupt from a tx */
- if (my_uicmsr & UIC_MAL_TXEOB) {
- mal_rx_eob = mfdcr (maltxeobisr);
- mtdcr (maltxeobisr, mal_rx_eob);
- mtdcr (uicsr, UIC_MAL_TXEOB);
- }
- /* handle MAL RX EOB interupt from a receive */
- /* check for EOB on valid channels */
- if (my_uicmsr & UIC_MAL_RXEOB)
- {
- mal_rx_eob = mfdcr (malrxeobisr);
- if ((mal_rx_eob & (0x80000000 >> hw_p->devnum)) != 0) { /* call emac routine for channel x */
- /* clear EOB
- mtdcr(malrxeobisr, mal_rx_eob); */
- enet_rcv (dev, emac_isr);
- /* indicate that we serviced an interrupt */
- serviced = 1;
- rc = 0;
- }
- }
- mtdcr (uicsr, MAL_UIC_DEF|EMAC_UIC_DEF|EMAC_UIC_DEF1); /* Clear */
- }
- while (serviced);
-
- return (rc);
-}
-#endif
-/*-----------------------------------------------------------------------------+
- * MAL Error Routine
- *-----------------------------------------------------------------------------*/
-static void mal_err (struct eth_device *dev, unsigned long isr,
- unsigned long uic, unsigned long maldef,
- unsigned long mal_errr)
-{
- EMAC_405_HW_PST hw_p = dev->priv;
-
- mtdcr (malesr, isr); /* clear interrupt */
-
- /* clear DE interrupt */
- mtdcr (maltxdeir, 0xC0000000);
- mtdcr (malrxdeir, 0x80000000);
-
-#ifdef INFO_405_ENET
- printf ("\nMAL error occured.... ISR = %lx UIC = = %lx MAL_DEF = %lx MAL_ERR= %lx \n", isr, uic, maldef, mal_errr);
-#endif
-
- eth_init (hw_p->bis); /* start again... */
-}
-
-/*-----------------------------------------------------------------------------+
- * EMAC Error Routine
- *-----------------------------------------------------------------------------*/
-static void emac_err (struct eth_device *dev, unsigned long isr)
-{
- EMAC_405_HW_PST hw_p = dev->priv;
-
- printf ("EMAC%d error occured.... ISR = %lx\n", hw_p->devnum, isr);
- out32 (EMAC_ISR + hw_p->hw_addr, isr);
-}
-
-/*-----------------------------------------------------------------------------+
- * enet_rcv() handles the ethernet receive data
- *-----------------------------------------------------------------------------*/
-static void enet_rcv (struct eth_device *dev, unsigned long malisr)
-{
- struct enet_frame *ef_ptr;
- unsigned long data_len;
- unsigned long rx_eob_isr;
- EMAC_405_HW_PST hw_p = dev->priv;
-
- int handled = 0;
- int i;
- int loop_count = 0;
-
- rx_eob_isr = mfdcr (malrxeobisr);
- if ((0x80000000 >> hw_p->devnum) & rx_eob_isr) {
- /* clear EOB */
- mtdcr (malrxeobisr, rx_eob_isr);
-
- /* EMAC RX done */
- while (1) { /* do all */
- i = hw_p->rx_slot;
-
- if ((MAL_RX_CTRL_EMPTY & hw_p->rx[i].ctrl)
- || (loop_count >= NUM_RX_BUFF))
- break;
- loop_count++;
- hw_p->rx_slot++;
- if (NUM_RX_BUFF == hw_p->rx_slot)
- hw_p->rx_slot = 0;
- handled++;
- data_len = (unsigned long) hw_p->rx[i].data_len; /* Get len */
- if (data_len) {
- if (data_len > ENET_MAX_MTU) /* Check len */
- data_len = 0;
- else {
- if (EMAC_RX_ERRORS & hw_p->rx[i].ctrl) { /* Check Errors */
- data_len = 0;
- hw_p->stats.rx_err_log[hw_p->
- rx_err_index]
- = hw_p->rx[i].ctrl;
- hw_p->rx_err_index++;
- if (hw_p->rx_err_index ==
- MAX_ERR_LOG)
- hw_p->rx_err_index =
- 0;
- } /* emac_erros */
- } /* data_len < max mtu */
- } /* if data_len */
- if (!data_len) { /* no data */
- hw_p->rx[i].ctrl |= MAL_RX_CTRL_EMPTY; /* Free Recv Buffer */
-
- hw_p->stats.data_len_err++; /* Error at Rx */
- }
-
- /* !data_len */
- /* AS.HARNOIS */
- /* Check if user has already eaten buffer */
- /* if not => ERROR */
- else if (hw_p->rx_ready[hw_p->rx_i_index] != -1) {
- if (hw_p->is_receiving)
- printf ("ERROR : Receive buffers are full!\n");
- break;
- } else {
- hw_p->stats.rx_frames++;
- hw_p->stats.rx += data_len;
- ef_ptr = (struct enet_frame *) hw_p->rx[i].
- data_ptr;
-#ifdef INFO_405_ENET
- hw_p->stats.pkts_rx++;
-#endif
- /* AS.HARNOIS
- * use ring buffer
- */
- hw_p->rx_ready[hw_p->rx_i_index] = i;
- hw_p->rx_i_index++;
- if (NUM_RX_BUFF == hw_p->rx_i_index)
- hw_p->rx_i_index = 0;
-
- /* printf("X"); /|* test-only *|/ */
-
- /* AS.HARNOIS
- * free receive buffer only when
- * buffer has been handled (eth_rx)
- rx[i].ctrl |= MAL_RX_CTRL_EMPTY;
- */
- } /* if data_len */
- } /* while */
- } /* if EMACK_RXCHL */
-}
-
-
-static int ppc_4xx_eth_rx (struct eth_device *dev)
-{
- int length;
- int user_index;
- unsigned long msr;
- EMAC_405_HW_PST hw_p = dev->priv;
-
- hw_p->is_receiving = 1; /* tell driver */
-
- for (;;) {
- /* AS.HARNOIS
- * use ring buffer and
- * get index from rx buffer desciptor queue
- */
- user_index = hw_p->rx_ready[hw_p->rx_u_index];
- if (user_index == -1) {
- length = -1;
- break; /* nothing received - leave for() loop */
- }
-
- msr = mfmsr ();
- mtmsr (msr & ~(MSR_EE));
-
- length = hw_p->rx[user_index].data_len;
-
- /* Pass the packet up to the protocol layers. */
- /* NetReceive(NetRxPackets[rxIdx], length - 4); */
- /* NetReceive(NetRxPackets[i], length); */
- NetReceive (NetRxPackets[user_index], length - 4);
- /* Free Recv Buffer */
- hw_p->rx[user_index].ctrl |= MAL_RX_CTRL_EMPTY;
- /* Free rx buffer descriptor queue */
- hw_p->rx_ready[hw_p->rx_u_index] = -1;
- hw_p->rx_u_index++;
- if (NUM_RX_BUFF == hw_p->rx_u_index)
- hw_p->rx_u_index = 0;
-
-#ifdef INFO_405_ENET
- hw_p->stats.pkts_handled++;
-#endif
-
- mtmsr (msr); /* Enable IRQ's */
- }
-
- hw_p->is_receiving = 0; /* tell driver */
-
- return length;
-}
-
-static int virgin = 0;
-int ppc_4xx_eth_initialize (bd_t * bis)
-{
- struct eth_device *dev;
- int eth_num = 0;
-
- EMAC_405_HW_PST hw = NULL;
-
- for (eth_num = 0; eth_num < EMAC_NUM_DEV; eth_num++) {
-
- /* Allocate device structure */
- dev = (struct eth_device *) malloc (sizeof (*dev));
- if (dev == NULL) {
- printf ("ppc_405x_eth_initialize: "
- "Cannot allocate eth_device %d\n", eth_num);
- return (-1);
- }
- memset(dev, 0, sizeof(*dev));
- /* Allocate our private use data */
- hw = (EMAC_405_HW_PST) malloc (sizeof (*hw));
- if (hw == NULL) {
- printf ("ppc_405x_eth_initialize: "
- "Cannot allocate private hw data for eth_device %d",
- eth_num);
- free (dev);
- return (-1);
- }
- memset(hw, 0, sizeof(*hw));
-
- switch (eth_num) {
- case 0:
- hw->hw_addr = 0;
- memcpy (dev->enetaddr, bis->bi_enetaddr, 6);
- break;
-#if defined(CONFIG_NET_MULTI)
- case 1:
- hw->hw_addr = 0x100;
- memcpy (dev->enetaddr, bis->bi_enet1addr, 6);
- break;
-#endif
- default:
- hw->hw_addr = 0;
- memcpy (dev->enetaddr, bis->bi_enetaddr, 6);
- break;
- }
-
- hw->devnum = eth_num;
- hw->print_speed = 1;
-
- sprintf (dev->name, "ppc_405x_eth%d", eth_num);
- dev->priv = (void *) hw;
- dev->init = ppc_4xx_eth_init;
- dev->halt = ppc_4xx_eth_halt;
- dev->send = ppc_4xx_eth_send;
- dev->recv = ppc_4xx_eth_rx;
-
- if (0 == virgin) {
- /* set the MAL IER ??? names may change with new spec ??? */
- mal_ier =
- MAL_IER_DE | MAL_IER_NE | MAL_IER_TE |
- MAL_IER_OPBE | MAL_IER_PLBE;
- mtdcr (malesr, 0xffffffff); /* clear pending interrupts */
- mtdcr (maltxdeir, 0xffffffff); /* clear pending interrupts */
- mtdcr (malrxdeir, 0xffffffff); /* clear pending interrupts */
- mtdcr (malier, mal_ier);
-
- /* install MAL interrupt handler */
- irq_install_handler (VECNUM_MS,
- (interrupt_handler_t *) enetInt,
- dev);
- irq_install_handler (VECNUM_MTE,
- (interrupt_handler_t *) enetInt,
- dev);
- irq_install_handler (VECNUM_MRE,
- (interrupt_handler_t *) enetInt,
- dev);
- irq_install_handler (VECNUM_TXDE,
- (interrupt_handler_t *) enetInt,
- dev);
- irq_install_handler (VECNUM_RXDE,
- (interrupt_handler_t *) enetInt,
- dev);
- virgin = 1;
- }
-
-#if defined(CONFIG_NET_MULTI)
- eth_register (dev);
-#else
- emac0_dev = dev;
-#endif
-
- } /* end for each supported device */
-
- return (1);
-}
-
-#if !defined(CONFIG_NET_MULTI)
-void eth_halt (void) {
- if (emac0_dev) {
- ppc_4xx_eth_halt(emac0_dev);
- free(emac0_dev);
- emac0_dev = NULL;
- }
-}
-
-int eth_init (bd_t *bis)
-{
- ppc_4xx_eth_initialize(bis);
- return(ppc_4xx_eth_init(emac0_dev, bis));
-}
-
-int eth_send(volatile void *packet, int length)
-{
-
- return (ppc_4xx_eth_send(emac0_dev, packet, length));
-}
-
-int eth_rx(void)
-{
- return (ppc_4xx_eth_rx(emac0_dev));
-}
-#endif
-
-#endif /* CONFIG_405 */
diff --git a/cpu/ppc4xx/440gx_enet.c b/cpu/ppc4xx/4xx_enet.c
index d0b6c15..7766f9a 100644
--- a/cpu/ppc4xx/440gx_enet.c
+++ b/cpu/ppc4xx/4xx_enet.c
@@ -72,27 +72,37 @@
* - ported from 405gp_enet.c to utilized upto 4 EMAC ports
* in the 440GX. This port should work with the 440GP
* (2 EMACs) also
+ * 15-Aug-05 sr@denx.de
+ * - merged 405gp_enet.c and 440gx_enet.c to generic 4xx_enet.c
+ now handling all 4xx cpu's.
*-----------------------------------------------------------------------------*/
#include <config.h>
-#if defined(CONFIG_440) && defined(CONFIG_NET_MULTI)
-
#include <common.h>
#include <net.h>
#include <asm/processor.h>
-#include <ppc440.h>
#include <commproc.h>
-#include <440gx_enet.h>
+#include <ppc4xx.h>
+#include <ppc4xx_enet.h>
#include <405_mal.h>
#include <miiphy.h>
#include <malloc.h>
#include "vecnum.h"
+/*
+ * Only compile for platform with IBM/AMCC EMAC ethernet controller and
+ * network support enabled.
+ * Remark: CONFIG_405 describes Xilinx PPC405 FPGA without EMAC controller!
+ */
+#if (CONFIG_COMMANDS & CFG_CMD_NET) && !defined(CONFIG_405) && !defined(CONFIG_IOP480)
+
+#if !(defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII))
+#error "CONFIG_MII has to be defined!"
+#endif
#define EMAC_RESET_TIMEOUT 1000 /* 1000 ms reset timeout */
#define PHY_AUTONEGOTIATE_TIMEOUT 4000 /* 4000 ms autonegotiate timeout */
-
/* Ethernet Transmit and Receive Buffers */
/* AS.HARNOIS
* In the same way ENET_MAX_MTU and ENET_MAX_MTU_ALIGNED are set from
@@ -101,7 +111,6 @@
#define ENET_MAX_MTU PKTSIZE
#define ENET_MAX_MTU_ALIGNED PKTSIZE_ALIGN
-
/* define the number of channels implemented */
#define EMAC_RXCHL EMAC_NUM_DEV
#define EMAC_TXCHL EMAC_NUM_DEV
@@ -113,19 +122,27 @@
#define MAL_UIC_ERR ( UIC_MAL_SERR | UIC_MAL_TXDE | UIC_MAL_RXDE)
#define MAL_UIC_DEF (UIC_MAL_RXEOB | MAL_UIC_ERR)
#define EMAC_UIC_DEF UIC_ENET
+#define EMAC_UIC_DEF1 UIC_ENET1
+#define SEL_UIC_DEF(p) (p ? UIC_ENET1 : UIC_ENET )
-#undef INFO_440_ENET
+#undef INFO_4XX_ENET
#define BI_PHYMODE_NONE 0
#define BI_PHYMODE_ZMII 1
#define BI_PHYMODE_RGMII 2
+
/*-----------------------------------------------------------------------------+
* Global variables. TX and RX descriptors and buffers.
*-----------------------------------------------------------------------------*/
/* IER globals */
static uint32_t mal_ier;
+#if !defined(CONFIG_NET_MULTI)
+struct eth_device *emac0_dev;
+#endif
+
+
/*-----------------------------------------------------------------------------+
* Prototypes and externals.
*-----------------------------------------------------------------------------*/
@@ -137,31 +154,33 @@ static void mal_err (struct eth_device *dev, unsigned long isr,
unsigned long mal_errr);
static void emac_err (struct eth_device *dev, unsigned long isr);
+
/*-----------------------------------------------------------------------------+
-| ppc_440x_eth_halt
+| ppc_4xx_eth_halt
| Disable MAL channel, and EMACn
-|
-|
+-----------------------------------------------------------------------------*/
-static void ppc_440x_eth_halt (struct eth_device *dev)
+static void ppc_4xx_eth_halt (struct eth_device *dev)
{
- EMAC_440GX_HW_PST hw_p = dev->priv;
+ EMAC_4XX_HW_PST hw_p = dev->priv;
uint32_t failsafe = 10000;
out32 (EMAC_IER + hw_p->hw_addr, 0x00000000); /* disable emac interrupts */
/* 1st reset MAL channel */
/* Note: writing a 0 to a channel has no effect */
+#if defined(CONFIG_405EP) || defined(CONFIG_440EP) || defined(CONFIG_440GR)
+ mtdcr (maltxcarr, (MAL_CR_MMSR >> (hw_p->devnum * 2)));
+#else
mtdcr (maltxcarr, (MAL_CR_MMSR >> hw_p->devnum));
+#endif
mtdcr (malrxcarr, (MAL_CR_MMSR >> hw_p->devnum));
/* wait for reset */
- while (mfdcr (maltxcasr) & (MAL_CR_MMSR >> hw_p->devnum)) {
+ while (mfdcr (malrxcasr) & (MAL_CR_MMSR >> hw_p->devnum)) {
udelay (1000); /* Delay 1 MS so as not to hammer the register */
failsafe--;
if (failsafe == 0)
break;
-
}
/* EMAC RESET */
@@ -176,7 +195,7 @@ extern int phy_setup_aneg (unsigned char addr);
extern int miiphy_reset (unsigned char addr);
#if defined (CONFIG_440GX)
-int ppc_440x_eth_setup_bridge(int devnum, bd_t * bis)
+int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis)
{
unsigned long pfc1;
unsigned long zmiifer;
@@ -267,10 +286,10 @@ int ppc_440x_eth_setup_bridge(int devnum, bd_t * bis)
}
#endif
-static int ppc_440x_eth_init (struct eth_device *dev, bd_t * bis)
+static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
{
int i, j;
- unsigned long reg;
+ unsigned long reg = 0;
unsigned long msr;
unsigned long speed;
unsigned long duplex;
@@ -278,27 +297,29 @@ static int ppc_440x_eth_init (struct eth_device *dev, bd_t * bis)
unsigned mode_reg;
unsigned short devnum;
unsigned short reg_short;
- sys_info_t sysinfo;
#if defined(CONFIG_440GX)
+ sys_info_t sysinfo;
int ethgroup;
#endif
- EMAC_440GX_HW_PST hw_p = dev->priv;
+ EMAC_4XX_HW_PST hw_p = dev->priv;
/* before doing anything, figure out if we have a MAC address */
/* if not, bail */
if (memcmp (dev->enetaddr, "\0\0\0\0\0\0", 6) == 0)
return -1;
+#if defined(CONFIG_440GX)
/* Need to get the OPB frequency so we can access the PHY */
get_sys_info (&sysinfo);
+#endif
msr = mfmsr ();
mtmsr (msr & ~(MSR_EE)); /* disable interrupts */
devnum = hw_p->devnum;
-#ifdef INFO_440_ENET
+#ifdef INFO_4XX_ENET
/* AS.HARNOIS
* We should have :
* hw_p->stats.pkts_handled <= hw_p->stats.pkts_rx <= hw_p->stats.pkts_handled+PKTBUFSRX
@@ -320,29 +341,6 @@ static int ppc_440x_eth_init (struct eth_device *dev, bd_t * bis)
hw_p->stats.pkts_handled = 0;
#endif
- /* MAL Channel RESET */
- /* 1st reset MAL channel */
- /* Note: writing a 0 to a channel has no effect */
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
- mtdcr (maltxcarr, (MAL_TXRX_CASR >> (hw_p->devnum*2)));
-#else
- mtdcr (maltxcarr, (MAL_TXRX_CASR >> hw_p->devnum));
-#endif
-
- mtdcr (malrxcarr, (MAL_TXRX_CASR >> hw_p->devnum));
-
- /* wait for reset */
- /* TBS: should have udelay and failsafe here */
- failsafe = 10000;
- /* wait for reset */
- while (mfdcr (maltxcasr) & (MAL_CR_MMSR >> hw_p->devnum)) {
- udelay (1000); /* Delay 1 MS so as not to hammer the register */
- failsafe--;
- if (failsafe == 0)
- break;
-
- }
-
hw_p->tx_err_index = 0; /* Transmit Error Index for tx_err_log */
hw_p->rx_err_index = 0; /* Receive Error Index for rx_err_log */
@@ -354,6 +352,7 @@ static int ppc_440x_eth_init (struct eth_device *dev, bd_t * bis)
hw_p->tx_i_index = 0; /* Transmit Interrupt Queue Index */
hw_p->tx_u_index = 0; /* Transmit User Queue Index */
+#if defined(CONFIG_440)
/* set RMII mode */
/* NOTE: 440GX spec states that mode is mutually exclusive */
/* NOTE: Therefore, disable all other EMACS, since we handle */
@@ -365,7 +364,7 @@ static int ppc_440x_eth_init (struct eth_device *dev, bd_t * bis)
#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
out32 (ZMII_FER, (ZMII_FER_RMII | ZMII_FER_MDI) << ZMII_FER_V (devnum));
#elif defined(CONFIG_440GX)
- ethgroup = ppc_440x_eth_setup_bridge(devnum, bis);
+ ethgroup = ppc_4xx_eth_setup_bridge(devnum, bis);
#else
if ((devnum == 0) || (devnum == 1)) {
out32 (ZMII_FER, (ZMII_FER_SMII | ZMII_FER_MDI) << ZMII_FER_V (devnum));
@@ -378,6 +377,8 @@ static int ppc_440x_eth_init (struct eth_device *dev, bd_t * bis)
#endif
out32 (ZMII_SSR, ZMII_SSR_SP << ZMII_SSR_V(devnum));
+#endif /* defined(CONFIG_440) */
+
__asm__ volatile ("eieio");
/* reset emac so we have access to the phy */
@@ -415,9 +416,11 @@ static int ppc_440x_eth_init (struct eth_device *dev, bd_t * bis)
case 0:
reg = CONFIG_PHY_ADDR;
break;
+#if defined (CONFIG_PHY1_ADDR)
case 1:
reg = CONFIG_PHY1_ADDR;
break;
+#endif
#if defined (CONFIG_440GX)
case 2:
reg = CONFIG_PHY2_ADDR;
@@ -433,7 +436,7 @@ static int ppc_440x_eth_init (struct eth_device *dev, bd_t * bis)
bis->bi_phynum[devnum] = reg;
-#ifndef CONFIG_NO_PHY_RESET
+#if defined(CONFIG_PHY_RESET)
/*
* Reset the phy, only if its the first time through
* otherwise, just check the speeds & feeds
@@ -476,7 +479,7 @@ static int ppc_440x_eth_init (struct eth_device *dev, bd_t * bis)
phy_setup_aneg (reg);
udelay (1000);
}
-#endif /* CONFIG_NO_PHY_RESET */
+#endif /* defined(CONFIG_PHY_RESET) */
miiphy_read (reg, PHY_BMSR, &reg_short);
@@ -506,7 +509,8 @@ static int ppc_440x_eth_init (struct eth_device *dev, bd_t * bis)
puts (" done\n");
udelay (500000); /* another 500 ms (results in faster booting) */
}
-#endif
+#endif /* #ifndef CONFIG_CS8952_PHY */
+
speed = miiphy_speed (reg);
duplex = miiphy_duplex (reg);
@@ -516,6 +520,7 @@ static int ppc_440x_eth_init (struct eth_device *dev, bd_t * bis)
(int) speed, (duplex == HALF) ? "HALF" : "FULL");
}
+#if defined(CONFIG_440)
#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
mfsdr(sdr_mfr, reg);
if (speed == 100) {
@@ -543,6 +548,7 @@ static int ppc_440x_eth_init (struct eth_device *dev, bd_t * bis)
out32 (RGMII_SSR, reg);
}
+#endif /* defined(CONFIG_440) */
/* set the Mal configuration reg */
#if defined(CONFIG_440GX)
@@ -665,13 +671,15 @@ static int ppc_440x_eth_init (struct eth_device *dev, bd_t * bis)
switch (devnum) {
case 1:
/* setup MAL tx & rx channel pointers */
-#if defined (CONFIG_440EP) || defined (CONFIG_440GR)
+#if defined (CONFIG_405EP) || defined (CONFIG_440EP) || defined (CONFIG_440GR)
mtdcr (maltxctp2r, hw_p->tx);
#else
mtdcr (maltxctp1r, hw_p->tx);
#endif
+#if defined(CONFIG_440)
mtdcr (maltxbattr, 0x0);
mtdcr (malrxbattr, 0x0);
+#endif
mtdcr (malrxctp1r, hw_p->rx);
/* set RX buffer size */
mtdcr (malrcbs1, ENET_MAX_MTU_ALIGNED / 16);
@@ -680,8 +688,8 @@ static int ppc_440x_eth_init (struct eth_device *dev, bd_t * bis)
case 2:
/* setup MAL tx & rx channel pointers */
mtdcr (maltxbattr, 0x0);
- mtdcr (maltxctp2r, hw_p->tx);
mtdcr (malrxbattr, 0x0);
+ mtdcr (maltxctp2r, hw_p->tx);
mtdcr (malrxctp2r, hw_p->rx);
/* set RX buffer size */
mtdcr (malrcbs2, ENET_MAX_MTU_ALIGNED / 16);
@@ -699,9 +707,11 @@ static int ppc_440x_eth_init (struct eth_device *dev, bd_t * bis)
case 0:
default:
/* setup MAL tx & rx channel pointers */
+#if defined(CONFIG_440)
mtdcr (maltxbattr, 0x0);
- mtdcr (maltxctp0r, hw_p->tx);
mtdcr (malrxbattr, 0x0);
+#endif
+ mtdcr (maltxctp0r, hw_p->tx);
mtdcr (malrxctp0r, hw_p->rx);
/* set RX buffer size */
mtdcr (malrcbs0, ENET_MAX_MTU_ALIGNED / 16);
@@ -709,7 +719,7 @@ static int ppc_440x_eth_init (struct eth_device *dev, bd_t * bis)
}
/* Enable MAL transmit and receive channels */
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
+#if defined(CONFIG_405EP) || defined(CONFIG_440EP) || defined(CONFIG_440GR)
mtdcr (maltxcasr, (MAL_TXRX_CASR >> (hw_p->devnum*2)));
#else
mtdcr (maltxcasr, (MAL_TXRX_CASR >> hw_p->devnum));
@@ -745,8 +755,13 @@ static int ppc_440x_eth_init (struct eth_device *dev, bd_t * bis)
out32 (EMAC_TRTR + hw_p->hw_addr, 0x18000000); /* 256 byte threshold */
/* set receive low/high water mark register */
+#if defined(CONFIG_440)
/* 440GP has a 64 byte burst length */
out32 (EMAC_RX_HI_LO_WMARK + hw_p->hw_addr, 0x80009000);
+#else
+ /* 405s have a 16 byte burst length */
+ out32 (EMAC_RX_HI_LO_WMARK + hw_p->hw_addr, 0x0f002000);
+#endif /* defined(CONFIG_440) */
out32 (EMAC_TXM1 + hw_p->hw_addr, 0xf8640000);
/* Set fifo limit entry in tx mode 0 */
@@ -755,8 +770,7 @@ static int ppc_440x_eth_init (struct eth_device *dev, bd_t * bis)
out32 (EMAC_I_FRAME_GAP_REG + hw_p->hw_addr, 0x00000008);
/* Set EMAC IER */
- hw_p->emac_ier = EMAC_ISR_PTLE | EMAC_ISR_BFCS |
- EMAC_ISR_PTLE | EMAC_ISR_ORE | EMAC_ISR_IRE;
+ hw_p->emac_ier = EMAC_ISR_PTLE | EMAC_ISR_BFCS | EMAC_ISR_ORE | EMAC_ISR_IRE;
if (speed == _100BASET)
hw_p->emac_ier = hw_p->emac_ier | EMAC_ISR_SYE;
@@ -767,8 +781,6 @@ static int ppc_440x_eth_init (struct eth_device *dev, bd_t * bis)
/*
* Connect interrupt service routines
*/
- irq_install_handler (VECNUM_EWU0 + (hw_p->devnum * 2),
- (interrupt_handler_t *) enetInt, dev);
irq_install_handler (VECNUM_ETH0 + (hw_p->devnum * 2),
(interrupt_handler_t *) enetInt, dev);
}
@@ -782,13 +794,13 @@ static int ppc_440x_eth_init (struct eth_device *dev, bd_t * bis)
}
-static int ppc_440x_eth_send (struct eth_device *dev, volatile void *ptr,
+static int ppc_4xx_eth_send (struct eth_device *dev, volatile void *ptr,
int len)
{
struct enet_frame *ef_ptr;
ulong time_start, time_now;
unsigned long temp_txm0;
- EMAC_440GX_HW_PST hw_p = dev->priv;
+ EMAC_4XX_HW_PST hw_p = dev->priv;
ef_ptr = (struct enet_frame *) ptr;
@@ -823,7 +835,7 @@ static int ppc_440x_eth_send (struct eth_device *dev, volatile void *ptr,
out32 (EMAC_TXM0 + hw_p->hw_addr,
in32 (EMAC_TXM0 + hw_p->hw_addr) | EMAC_TXM0_GNP0);
-#ifdef INFO_440_ENET
+#ifdef INFO_4XX_ENET
hw_p->stats.pkts_tx++;
#endif
@@ -849,6 +861,7 @@ static int ppc_440x_eth_send (struct eth_device *dev, volatile void *ptr,
}
}
+#if defined (CONFIG_440)
int enetInt (struct eth_device *dev)
{
@@ -862,13 +875,17 @@ int enetInt (struct eth_device *dev)
#if defined(CONFIG_440GX)
unsigned long my_uic2msr;
#endif
- EMAC_440GX_HW_PST hw_p;
+ EMAC_4XX_HW_PST hw_p;
/*
* Because the mal is generic, we need to get the current
* eth device
*/
- dev = eth_get_dev ();
+#if defined(CONFIG_NET_MULTI)
+ dev = eth_get_dev();
+#else
+ dev = emac0_dev;
+#endif
hw_p = dev->priv;
@@ -1026,6 +1043,96 @@ int enetInt (struct eth_device *dev)
return (rc);
}
+#else /* CONFIG_440 */
+
+int enetInt (struct eth_device *dev)
+{
+ int serviced;
+ int rc = -1; /* default to not us */
+ unsigned long mal_isr;
+ unsigned long emac_isr = 0;
+ unsigned long mal_rx_eob;
+ unsigned long my_uicmsr;
+
+ EMAC_4XX_HW_PST hw_p;
+
+ /*
+ * Because the mal is generic, we need to get the current
+ * eth device
+ */
+#if defined(CONFIG_NET_MULTI)
+ dev = eth_get_dev();
+#else
+ dev = emac0_dev;
+#endif
+
+ hw_p = dev->priv;
+
+ /* enter loop that stays in interrupt code until nothing to service */
+ do {
+ serviced = 0;
+
+ my_uicmsr = mfdcr (uicmsr);
+
+ if ((my_uicmsr & (MAL_UIC_DEF | EMAC_UIC_DEF)) == 0) { /* not for us */
+ return (rc);
+ }
+ /* get and clear controller status interrupts */
+ /* look at Mal and EMAC interrupts */
+ if ((MAL_UIC_DEF & my_uicmsr) != 0) { /* we have a MAL interrupt */
+ mal_isr = mfdcr (malesr);
+ /* look for mal error */
+ if ((my_uicmsr & MAL_UIC_ERR) != 0) {
+ mal_err (dev, mal_isr, my_uicmsr, MAL_UIC_DEF, MAL_UIC_ERR);
+ serviced = 1;
+ rc = 0;
+ }
+ }
+
+ /* port by port dispatch of emac interrupts */
+
+ if ((SEL_UIC_DEF(hw_p->devnum) & my_uicmsr) != 0) { /* look for EMAC errors */
+ emac_isr = in32 (EMAC_ISR + hw_p->hw_addr);
+ if ((hw_p->emac_ier & emac_isr) != 0) {
+ emac_err (dev, emac_isr);
+ serviced = 1;
+ rc = 0;
+ }
+ }
+ if (((hw_p->emac_ier & emac_isr) != 0) || ((MAL_UIC_ERR & my_uicmsr) != 0)) {
+ mtdcr (uicsr, MAL_UIC_DEF | SEL_UIC_DEF(hw_p->devnum)); /* Clear */
+ return (rc); /* we had errors so get out */
+ }
+
+ /* handle MAX TX EOB interrupt from a tx */
+ if (my_uicmsr & UIC_MAL_TXEOB) {
+ mal_rx_eob = mfdcr (maltxeobisr);
+ mtdcr (maltxeobisr, mal_rx_eob);
+ mtdcr (uicsr, UIC_MAL_TXEOB);
+ }
+ /* handle MAL RX EOB interupt from a receive */
+ /* check for EOB on valid channels */
+ if (my_uicmsr & UIC_MAL_RXEOB)
+ {
+ mal_rx_eob = mfdcr (malrxeobisr);
+ if ((mal_rx_eob & (0x80000000 >> hw_p->devnum)) != 0) { /* call emac routine for channel x */
+ /* clear EOB
+ mtdcr(malrxeobisr, mal_rx_eob); */
+ enet_rcv (dev, emac_isr);
+ /* indicate that we serviced an interrupt */
+ serviced = 1;
+ rc = 0;
+ }
+ }
+ mtdcr (uicsr, MAL_UIC_DEF|EMAC_UIC_DEF|EMAC_UIC_DEF1); /* Clear */
+ }
+ while (serviced);
+
+ return (rc);
+}
+
+#endif /* CONFIG_440 */
+
/*-----------------------------------------------------------------------------+
* MAL Error Routine
*-----------------------------------------------------------------------------*/
@@ -1033,7 +1140,7 @@ static void mal_err (struct eth_device *dev, unsigned long isr,
unsigned long uic, unsigned long maldef,
unsigned long mal_errr)
{
- EMAC_440GX_HW_PST hw_p = dev->priv;
+ EMAC_4XX_HW_PST hw_p = dev->priv;
mtdcr (malesr, isr); /* clear interrupt */
@@ -1041,7 +1148,7 @@ static void mal_err (struct eth_device *dev, unsigned long isr,
mtdcr (maltxdeir, 0xC0000000);
mtdcr (malrxdeir, 0x80000000);
-#ifdef INFO_440_ENET
+#ifdef INFO_4XX_ENET
printf ("\nMAL error occured.... ISR = %lx UIC = = %lx MAL_DEF = %lx MAL_ERR= %lx \n", isr, uic, maldef, mal_errr);
#endif
@@ -1053,7 +1160,7 @@ static void mal_err (struct eth_device *dev, unsigned long isr,
*-----------------------------------------------------------------------------*/
static void emac_err (struct eth_device *dev, unsigned long isr)
{
- EMAC_440GX_HW_PST hw_p = dev->priv;
+ EMAC_4XX_HW_PST hw_p = dev->priv;
printf ("EMAC%d error occured.... ISR = %lx\n", hw_p->devnum, isr);
out32 (EMAC_ISR + hw_p->hw_addr, isr);
@@ -1067,7 +1174,7 @@ static void enet_rcv (struct eth_device *dev, unsigned long malisr)
struct enet_frame *ef_ptr;
unsigned long data_len;
unsigned long rx_eob_isr;
- EMAC_440GX_HW_PST hw_p = dev->priv;
+ EMAC_4XX_HW_PST hw_p = dev->priv;
int handled = 0;
int i;
@@ -1127,7 +1234,7 @@ static void enet_rcv (struct eth_device *dev, unsigned long malisr)
hw_p->stats.rx += data_len;
ef_ptr = (struct enet_frame *) hw_p->rx[i].
data_ptr;
-#ifdef INFO_440_ENET
+#ifdef INFO_4XX_ENET
hw_p->stats.pkts_rx++;
#endif
/* AS.HARNOIS
@@ -1138,8 +1245,6 @@ static void enet_rcv (struct eth_device *dev, unsigned long malisr)
if (NUM_RX_BUFF == hw_p->rx_i_index)
hw_p->rx_i_index = 0;
- /* printf("X"); /|* test-only *|/ */
-
/* AS.HARNOIS
* free receive buffer only when
* buffer has been handled (eth_rx)
@@ -1151,12 +1256,12 @@ static void enet_rcv (struct eth_device *dev, unsigned long malisr)
}
-static int ppc_440x_eth_rx (struct eth_device *dev)
+static int ppc_4xx_eth_rx (struct eth_device *dev)
{
int length;
int user_index;
unsigned long msr;
- EMAC_440GX_HW_PST hw_p = dev->priv;
+ EMAC_4XX_HW_PST hw_p = dev->priv;
hw_p->is_receiving = 1; /* tell driver */
@@ -1188,7 +1293,7 @@ static int ppc_440x_eth_rx (struct eth_device *dev)
if (NUM_RX_BUFF == hw_p->rx_u_index)
hw_p->rx_u_index = 0;
-#ifdef INFO_440_ENET
+#ifdef INFO_4XX_ENET
hw_p->stats.pkts_handled++;
#endif
@@ -1200,12 +1305,12 @@ static int ppc_440x_eth_rx (struct eth_device *dev)
return length;
}
-int ppc_440x_eth_initialize (bd_t * bis)
+int ppc_4xx_eth_initialize (bd_t * bis)
{
static int virgin = 0;
struct eth_device *dev;
int eth_num = 0;
- EMAC_440GX_HW_PST hw = NULL;
+ EMAC_4XX_HW_PST hw = NULL;
#if defined(CONFIG_440GX)
unsigned long pfc1;
@@ -1229,7 +1334,7 @@ int ppc_440x_eth_initialize (bd_t * bis)
bis->bi_phymode[3] = 2;
#if defined (CONFIG_440GX)
- ppc_440x_eth_setup_bridge(0, bis);
+ ppc_4xx_eth_setup_bridge(0, bis);
#endif
#endif
@@ -1273,16 +1378,16 @@ int ppc_440x_eth_initialize (bd_t * bis)
/* Allocate device structure */
dev = (struct eth_device *) malloc (sizeof (*dev));
if (dev == NULL) {
- printf ("ppc_440x_eth_initialize: "
+ printf ("ppc_4xx_eth_initialize: "
"Cannot allocate eth_device %d\n", eth_num);
return (-1);
}
memset(dev, 0, sizeof(*dev));
/* Allocate our private use data */
- hw = (EMAC_440GX_HW_PST) malloc (sizeof (*hw));
+ hw = (EMAC_4XX_HW_PST) malloc (sizeof (*hw));
if (hw == NULL) {
- printf ("ppc_440x_eth_initialize: "
+ printf ("ppc_4xx_eth_initialize: "
"Cannot allocate private hw data for eth_device %d",
eth_num);
free (dev);
@@ -1319,12 +1424,12 @@ int ppc_440x_eth_initialize (bd_t * bis)
hw->devnum = eth_num;
hw->print_speed = 1;
- sprintf (dev->name, "ppc_440x_eth%d", eth_num);
+ sprintf (dev->name, "ppc_4xx_eth%d", eth_num);
dev->priv = (void *) hw;
- dev->init = ppc_440x_eth_init;
- dev->halt = ppc_440x_eth_halt;
- dev->send = ppc_440x_eth_send;
- dev->recv = ppc_440x_eth_rx;
+ dev->init = ppc_4xx_eth_init;
+ dev->halt = ppc_4xx_eth_halt;
+ dev->send = ppc_4xx_eth_send;
+ dev->recv = ppc_4xx_eth_rx;
if (0 == virgin) {
/* set the MAL IER ??? names may change with new spec ??? */
@@ -1355,9 +1460,42 @@ int ppc_440x_eth_initialize (bd_t * bis)
virgin = 1;
}
+#if defined(CONFIG_NET_MULTI)
eth_register (dev);
+#else
+ emac0_dev = dev;
+#endif
} /* end for each supported device */
return (1);
}
-#endif /* CONFIG_440 && CONFIG_NET_MULTI */
+
+
+#if !defined(CONFIG_NET_MULTI)
+void eth_halt (void) {
+ if (emac0_dev) {
+ ppc_4xx_eth_halt(emac0_dev);
+ free(emac0_dev);
+ emac0_dev = NULL;
+ }
+}
+
+int eth_init (bd_t *bis)
+{
+ ppc_4xx_eth_initialize(bis);
+ return(ppc_4xx_eth_init(emac0_dev, bis));
+}
+
+int eth_send(volatile void *packet, int length)
+{
+
+ return (ppc_4xx_eth_send(emac0_dev, packet, length));
+}
+
+int eth_rx(void)
+{
+ return (ppc_4xx_eth_rx(emac0_dev));
+}
+#endif /* !defined(CONFIG_NET_MULTI) */
+
+#endif /* #if (CONFIG_COMMANDS & CFG_CMD_NET) */
diff --git a/cpu/ppc4xx/Makefile b/cpu/ppc4xx/Makefile
index 5b16754..c563457 100644
--- a/cpu/ppc4xx/Makefile
+++ b/cpu/ppc4xx/Makefile
@@ -27,10 +27,10 @@ LIB = lib$(CPU).a
START = start.o resetvec.o kgdb.o
AOBJS = dcr.o
-COBJS = 405gp_enet.o 405gp_pci.o 440gx_enet.o \
+COBJS = 405gp_pci.o 4xx_enet.o \
bedbug_405.o commproc.o \
cpu.o cpu_init.o i2c.o interrupts.o \
- miiphy.o miiphy_440.o sdram.o serial.o \
+ miiphy.o sdram.o serial.o \
spd_sdram.o speed.o traps.o usb_ohci.o usbdev.o
OBJS = $(AOBJS) $(COBJS)
diff --git a/cpu/ppc4xx/cpu_init.c b/cpu/ppc4xx/cpu_init.c
index 68e1a45..79cfba3 100644
--- a/cpu/ppc4xx/cpu_init.c
+++ b/cpu/ppc4xx/cpu_init.c
@@ -23,7 +23,7 @@
#include <common.h>
#include <watchdog.h>
-#include <405gp_enet.h>
+#include <ppc4xx_enet.h>
#include <asm/processor.h>
#include <ppc4xx.h>
diff --git a/cpu/ppc4xx/miiphy.c b/cpu/ppc4xx/miiphy.c
index cb9dccd..24f9154 100644
--- a/cpu/ppc4xx/miiphy.c
+++ b/cpu/ppc4xx/miiphy.c
@@ -1,42 +1,44 @@
/*-----------------------------------------------------------------------------+
|
- | This source code has been made available to you by IBM on an AS-IS
- | basis. Anyone receiving this source is licensed under IBM
- | copyrights to use it in any way he or she deems fit, including
- | copying it, modifying it, compiling it, and redistributing it either
- | with or without modifications. No license under IBM patents or
- | patent applications is to be implied by the copyright license.
+ | This source code has been made available to you by IBM on an AS-IS
+ | basis. Anyone receiving this source is licensed under IBM
+ | copyrights to use it in any way he or she deems fit, including
+ | copying it, modifying it, compiling it, and redistributing it either
+ | with or without modifications. No license under IBM patents or
+ | patent applications is to be implied by the copyright license.
|
- | Any user of this software should understand that IBM cannot provide
- | technical support for this software and will not be responsible for
- | any consequences resulting from the use of this software.
+ | Any user of this software should understand that IBM cannot provide
+ | technical support for this software and will not be responsible for
+ | any consequences resulting from the use of this software.
|
- | Any person who transfers this source code or any derivative work
- | must include the IBM copyright notice, this paragraph, and the
- | preceding two paragraphs in the transferred software.
+ | Any person who transfers this source code or any derivative work
+ | must include the IBM copyright notice, this paragraph, and the
+ | preceding two paragraphs in the transferred software.
|
- | COPYRIGHT I B M CORPORATION 1995
- | LICENSED MATERIAL - PROGRAM PROPERTY OF I B M
+ | COPYRIGHT I B M CORPORATION 1995
+ | LICENSED MATERIAL - PROGRAM PROPERTY OF I B M
+-----------------------------------------------------------------------------*/
/*-----------------------------------------------------------------------------+
|
- | File Name: miiphy.c
+ | File Name: miiphy.c
|
- | Function: This module has utilities for accessing the MII PHY through
+ | Function: This module has utilities for accessing the MII PHY through
| the EMAC3 macro.
|
- | Author: Mark Wisner
+ | Author: Mark Wisner
|
| Change Activity-
|
- | Date Description of Change BY
- | --------- --------------------- ---
- | 05-May-99 Created MKW
- | 01-Jul-99 Changed clock setting of sta_reg from 66Mhz to 50Mhz to
- | better match OPB speed. Also modified delay times. JWB
- | 29-Jul-99 Added Full duplex support MKW
- | 24-Aug-99 Removed printf from dp83843_duplex() JWB
- | 19-Jul-00 Ported to esd cpci405 sr
+ | Date Description of Change BY
+ | --------- --------------------- ---
+ | 05-May-99 Created MKW
+ | 01-Jul-99 Changed clock setting of sta_reg from 66Mhz to 50Mhz to
+ | better match OPB speed. Also modified delay times. JWB
+ | 29-Jul-99 Added Full duplex support MKW
+ | 24-Aug-99 Removed printf from dp83843_duplex() JWB
+ | 19-Jul-00 Ported to esd cpci405 sr
+ | 23-Dec-03 Ported from miiphy.c to 440GX Travis Sawyer TBS
+ | <travis.sawyer@sandburst.com>
|
+-----------------------------------------------------------------------------*/
@@ -44,15 +46,13 @@
#include <asm/processor.h>
#include <ppc_asm.tmpl>
#include <commproc.h>
-#include <405gp_enet.h>
+#include <ppc4xx_enet.h>
#include <405_mal.h>
#include <miiphy.h>
-#if defined(CONFIG_405GP) || defined(CONFIG_405EP) || \
- (defined(CONFIG_440) && !defined(CONFIG_NET_MULTI))
/***********************************************************/
-/* Dump out to the screen PHY regs */
+/* Dump out to the screen PHY regs */
/***********************************************************/
void miiphy_dump (unsigned char addr)
@@ -72,75 +72,127 @@ void miiphy_dump (unsigned char addr)
if (i == 0x07)
i = 0x0f;
- } /* end for loop */
-} /* end dump */
+ } /* end for loop */
+} /* end dump */
/***********************************************************/
-/* read a phy reg and return the value with a rc */
-/* Note: We are referencing to EMAC_STACR register */
-/* @(EMAC_BASE + 92) because of: */
-/* - 405EP has only STACR for EMAC0 pinned out */
-/* - 405GP has onle one EMAC0 */
-/* - For 440 this module gets compiled only for */
-/* !CONFIG_NET_MULTI, i.e. only EMAC0 is supported. */
+/* (Re)start autonegotiation */
/***********************************************************/
+int phy_setup_aneg (unsigned char addr)
+{
+ unsigned short ctl, adv;
+
+ /* Setup standard advertise */
+ miiphy_read (addr, PHY_ANAR, &adv);
+ adv |= (PHY_ANLPAR_ACK | PHY_ANLPAR_RF | PHY_ANLPAR_T4 |
+ PHY_ANLPAR_TXFD | PHY_ANLPAR_TX | PHY_ANLPAR_10FD |
+ PHY_ANLPAR_10);
+ miiphy_write (addr, PHY_ANAR, adv);
-int miiphy_read (unsigned char addr, unsigned char reg,
- unsigned short *value)
+ /* Start/Restart aneg */
+ miiphy_read (addr, PHY_BMCR, &ctl);
+ ctl |= (PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
+ miiphy_write (addr, PHY_BMCR, ctl);
+
+ return 0;
+}
+
+
+/***********************************************************/
+/* read a phy reg and return the value with a rc */
+/***********************************************************/
+unsigned int miiphy_getemac_offset (void)
{
- unsigned long sta_reg; /* STA scratch area */
+#if defined(CONFIG_440) && defined(CONFIG_NET_MULTI)
+ unsigned long zmii;
+ unsigned long eoffset;
+
+ /* Need to find out which mdi port we're using */
+ zmii = in32 (ZMII_FER);
+
+ if (zmii & (ZMII_FER_MDI << ZMII_FER_V (0))) {
+ /* using port 0 */
+ eoffset = 0;
+ } else if (zmii & (ZMII_FER_MDI << ZMII_FER_V (1))) {
+ /* using port 1 */
+ eoffset = 0x100;
+ } else if (zmii & (ZMII_FER_MDI << ZMII_FER_V (2))) {
+ /* using port 2 */
+ eoffset = 0x400;
+ } else if (zmii & (ZMII_FER_MDI << ZMII_FER_V (3))) {
+ /* using port 3 */
+ eoffset = 0x600;
+ } else {
+ /* None of the mdi ports are enabled! */
+ /* enable port 0 */
+ zmii |= ZMII_FER_MDI << ZMII_FER_V (0);
+ out32 (ZMII_FER, zmii);
+ eoffset = 0;
+ /* need to soft reset port 0 */
+ zmii = in32 (EMAC_M0);
+ zmii |= EMAC_M0_SRST;
+ out32 (EMAC_M0, zmii);
+ }
+
+ return (eoffset);
+#else
+ return 0;
+#endif
+}
+
+
+int miiphy_read (unsigned char addr, unsigned char reg, unsigned short *value)
+{
+ unsigned long sta_reg; /* STA scratch area */
unsigned long i;
+ unsigned long emac_reg;
+
+ emac_reg = miiphy_getemac_offset ();
/* see if it is ready for 1000 nsec */
i = 0;
/* see if it is ready for sec */
- while ((in32 (EMAC_STACR) & EMAC_STACR_OC) == 0) {
+ while ((in32 (EMAC_STACR + emac_reg) & EMAC_STACR_OC) == 0) {
udelay (7);
if (i > 5) {
-#if 0 /* test-only */
+#if 0
printf ("read err 1\n");
#endif
return -1;
}
i++;
}
- sta_reg = reg; /* reg address */
+ sta_reg = reg; /* reg address */
/* set clock (50Mhz) and read flags */
+#if defined(CONFIG_440GX)
+ sta_reg |= EMAC_STACR_READ;
+#else
sta_reg = (sta_reg | EMAC_STACR_READ) & ~EMAC_STACR_CLK_100MHZ;
-#ifdef CONFIG_PHY_CLK_FREQ
+#endif
+
+#if defined(CONFIG_PHY_CLK_FREQ) && !defined(CONFIG_440GX)
sta_reg = sta_reg | CONFIG_PHY_CLK_FREQ;
#endif
sta_reg = sta_reg | (addr << 5); /* Phy address */
- out32 (EMAC_STACR, sta_reg);
-#if 0 /* test-only */
+ out32 (EMAC_STACR + emac_reg, sta_reg);
+#if 0 /* test-only */
printf ("a2: write: EMAC_STACR=0x%0x\n", sta_reg); /* test-only */
#endif
-#ifdef CONFIG_PHY_CMD_DELAY
- udelay (CONFIG_PHY_CMD_DELAY); /* Intel LXT971A needs this */
-#endif
- sta_reg = in32 (EMAC_STACR);
+ sta_reg = in32 (EMAC_STACR + emac_reg);
i = 0;
while ((sta_reg & EMAC_STACR_OC) == 0) {
udelay (7);
if (i > 5) {
-#if 0 /* test-only */
- printf ("read err 2\n");
-#endif
return -1;
}
i++;
- sta_reg = in32 (EMAC_STACR);
+ sta_reg = in32 (EMAC_STACR + emac_reg);
}
if ((sta_reg & EMAC_STACR_PHYE) != 0) {
-#if 0 /* test-only */
- printf ("read err 3\n");
- printf ("a2: read: EMAC_STACR=0x%0lx, i=%d\n",
- sta_reg, (int) i); /* test-only */
-#endif
return -1;
}
@@ -148,58 +200,59 @@ int miiphy_read (unsigned char addr, unsigned char reg,
return 0;
-} /* phy_read */
+} /* phy_read */
/***********************************************************/
-/* write a phy reg and return the value with a rc */
+/* write a phy reg and return the value with a rc */
/***********************************************************/
-int miiphy_write (unsigned char addr, unsigned char reg,
- unsigned short value)
+int miiphy_write (unsigned char addr, unsigned char reg, unsigned short value)
{
- unsigned long sta_reg; /* STA scratch area */
+ unsigned long sta_reg; /* STA scratch area */
unsigned long i;
+ unsigned long emac_reg;
+ emac_reg = miiphy_getemac_offset ();
/* see if it is ready for 1000 nsec */
i = 0;
- while ((in32 (EMAC_STACR) & EMAC_STACR_OC) == 0) {
+ while ((in32 (EMAC_STACR + emac_reg) & EMAC_STACR_OC) == 0) {
if (i > 5)
return -1;
udelay (7);
i++;
}
sta_reg = 0;
- sta_reg = reg; /* reg address */
+ sta_reg = reg; /* reg address */
/* set clock (50Mhz) and read flags */
+#if defined(CONFIG_440GX)
+ sta_reg |= EMAC_STACR_WRITE;
+#else
sta_reg = (sta_reg | EMAC_STACR_WRITE) & ~EMAC_STACR_CLK_100MHZ;
-#ifdef CONFIG_PHY_CLK_FREQ
- sta_reg = sta_reg | CONFIG_PHY_CLK_FREQ; /* Set clock frequency (PLB freq. dependend) */
+#endif
+
+#if defined(CONFIG_PHY_CLK_FREQ) && !defined(CONFIG_440GX)
+ sta_reg = sta_reg | CONFIG_PHY_CLK_FREQ; /* Set clock frequency (PLB freq. dependend) */
#endif
sta_reg = sta_reg | ((unsigned long) addr << 5); /* Phy address */
memcpy (&sta_reg, &value, 2); /* put in data */
- out32 (EMAC_STACR, sta_reg);
+ out32 (EMAC_STACR + emac_reg, sta_reg);
-#ifdef CONFIG_PHY_CMD_DELAY
- udelay (CONFIG_PHY_CMD_DELAY); /* Intel LXT971A needs this */
-#endif
/* wait for completion */
i = 0;
- sta_reg = in32 (EMAC_STACR);
+ sta_reg = in32 (EMAC_STACR + emac_reg);
while ((sta_reg & EMAC_STACR_OC) == 0) {
udelay (7);
if (i > 5)
return -1;
i++;
- sta_reg = in32 (EMAC_STACR);
+ sta_reg = in32 (EMAC_STACR + emac_reg);
}
if ((sta_reg & EMAC_STACR_PHYE) != 0)
return -1;
return 0;
-} /* phy_read */
-
-#endif /* CONFIG_405GP */
+} /* phy_write */
diff --git a/cpu/ppc4xx/miiphy_440.c b/cpu/ppc4xx/miiphy_440.c
deleted file mode 100644
index 6320fea..0000000
--- a/cpu/ppc4xx/miiphy_440.c
+++ /dev/null
@@ -1,259 +0,0 @@
-/*-----------------------------------------------------------------------------+
- |
- | This source code has been made available to you by IBM on an AS-IS
- | basis. Anyone receiving this source is licensed under IBM
- | copyrights to use it in any way he or she deems fit, including
- | copying it, modifying it, compiling it, and redistributing it either
- | with or without modifications. No license under IBM patents or
- | patent applications is to be implied by the copyright license.
- |
- | Any user of this software should understand that IBM cannot provide
- | technical support for this software and will not be responsible for
- | any consequences resulting from the use of this software.
- |
- | Any person who transfers this source code or any derivative work
- | must include the IBM copyright notice, this paragraph, and the
- | preceding two paragraphs in the transferred software.
- |
- | COPYRIGHT I B M CORPORATION 1995
- | LICENSED MATERIAL - PROGRAM PROPERTY OF I B M
- +-----------------------------------------------------------------------------*/
-/*-----------------------------------------------------------------------------+
- |
- | File Name: miiphy.c
- |
- | Function: This module has utilities for accessing the MII PHY through
- | the EMAC3 macro.
- |
- | Author: Mark Wisner
- |
- | Change Activity-
- |
- | Date Description of Change BY
- | --------- --------------------- ---
- | 05-May-99 Created MKW
- | 01-Jul-99 Changed clock setting of sta_reg from 66Mhz to 50Mhz to
- | better match OPB speed. Also modified delay times. JWB
- | 29-Jul-99 Added Full duplex support MKW
- | 24-Aug-99 Removed printf from dp83843_duplex() JWB
- | 19-Jul-00 Ported to esd cpci405 sr
- | 23-Dec-03 Ported from miiphy.c to 440GX Travis Sawyer TBS
- | <travis.sawyer@sandburst.com>
- |
- +-----------------------------------------------------------------------------*/
-
-#include <common.h>
-#include <asm/processor.h>
-#include <ppc_asm.tmpl>
-#include <commproc.h>
-#include <440gx_enet.h>
-#include <405_mal.h>
-#include <miiphy.h>
-
-#if defined(CONFIG_440) && defined(CONFIG_NET_MULTI)
-
-
-/***********************************************************/
-/* Dump out to the screen PHY regs */
-/***********************************************************/
-
-void miiphy_dump (unsigned char addr)
-{
- unsigned long i;
- unsigned short data;
-
-
- for (i = 0; i < 0x1A; i++) {
- if (miiphy_read (addr, i, &data)) {
- printf ("read error for reg %lx\n", i);
- return;
- }
- printf ("Phy reg %lx ==> %4x\n", i, data);
-
- /* jump to the next set of regs */
- if (i == 0x07)
- i = 0x0f;
-
- } /* end for loop */
-} /* end dump */
-
-
-/***********************************************************/
-/* (Re)start autonegotiation */
-/***********************************************************/
-int phy_setup_aneg (unsigned char addr)
-{
- unsigned short ctl, adv;
-
- /* Setup standard advertise */
- miiphy_read (addr, PHY_ANAR, &adv);
- adv |= (PHY_ANLPAR_ACK | PHY_ANLPAR_RF | PHY_ANLPAR_T4 |
- PHY_ANLPAR_TXFD | PHY_ANLPAR_TX | PHY_ANLPAR_10FD |
- PHY_ANLPAR_10);
- miiphy_write (addr, PHY_ANAR, adv);
-
- /* Start/Restart aneg */
- miiphy_read (addr, PHY_BMCR, &ctl);
- ctl |= (PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
- miiphy_write (addr, PHY_BMCR, ctl);
-
- return 0;
-}
-
-
-/***********************************************************/
-/* read a phy reg and return the value with a rc */
-/***********************************************************/
-unsigned int miiphy_getemac_offset (void)
-{
- unsigned long zmii;
- unsigned long eoffset;
-
- /* Need to find out which mdi port we're using */
- zmii = in32 (ZMII_FER);
-
- if (zmii & (ZMII_FER_MDI << ZMII_FER_V (0))) {
- /* using port 0 */
- eoffset = 0;
- } else if (zmii & (ZMII_FER_MDI << ZMII_FER_V (1))) {
- /* using port 1 */
- eoffset = 0x100;
- } else if (zmii & (ZMII_FER_MDI << ZMII_FER_V (2))) {
- /* using port 2 */
- eoffset = 0x400;
- } else if (zmii & (ZMII_FER_MDI << ZMII_FER_V (3))) {
- /* using port 3 */
- eoffset = 0x600;
- } else {
- /* None of the mdi ports are enabled! */
- /* enable port 0 */
- zmii |= ZMII_FER_MDI << ZMII_FER_V (0);
- out32 (ZMII_FER, zmii);
- eoffset = 0;
- /* need to soft reset port 0 */
- zmii = in32 (EMAC_M0);
- zmii |= EMAC_M0_SRST;
- out32 (EMAC_M0, zmii);
- }
-
- return (eoffset);
-
-}
-
-
-int miiphy_read (unsigned char addr, unsigned char reg, unsigned short *value)
-{
- unsigned long sta_reg; /* STA scratch area */
- unsigned long i;
- unsigned long emac_reg;
-
-
- emac_reg = miiphy_getemac_offset ();
- /* see if it is ready for 1000 nsec */
- i = 0;
-
- /* see if it is ready for sec */
- while ((in32 (EMAC_STACR + emac_reg) & EMAC_STACR_OC) == 0) {
- udelay (7);
- if (i > 5) {
-#if 0
- printf ("read err 1\n");
-#endif
- return -1;
- }
- i++;
- }
- sta_reg = reg; /* reg address */
- /* set clock (50Mhz) and read flags */
-#if defined(CONFIG_440GX)
- sta_reg |= EMAC_STACR_READ;
-#else
- sta_reg = (sta_reg | EMAC_STACR_READ) & ~EMAC_STACR_CLK_100MHZ;
-#endif
-
-#if defined(CONFIG_PHY_CLK_FREQ) && !defined(CONFIG_440GX)
- sta_reg = sta_reg | CONFIG_PHY_CLK_FREQ;
-#endif
- sta_reg = sta_reg | (addr << 5); /* Phy address */
-
- out32 (EMAC_STACR + emac_reg, sta_reg);
-#if 0 /* test-only */
- printf ("a2: write: EMAC_STACR=0x%0x\n", sta_reg); /* test-only */
-#endif
-
- sta_reg = in32 (EMAC_STACR + emac_reg);
- i = 0;
- while ((sta_reg & EMAC_STACR_OC) == 0) {
- udelay (7);
- if (i > 5) {
- return -1;
- }
- i++;
- sta_reg = in32 (EMAC_STACR + emac_reg);
- }
- if ((sta_reg & EMAC_STACR_PHYE) != 0) {
- return -1;
- }
-
- *value = *(short *) (&sta_reg);
- return 0;
-
-
-} /* phy_read */
-
-
-/***********************************************************/
-/* write a phy reg and return the value with a rc */
-/***********************************************************/
-
-int miiphy_write (unsigned char addr, unsigned char reg, unsigned short value)
-{
- unsigned long sta_reg; /* STA scratch area */
- unsigned long i;
- unsigned long emac_reg;
-
- emac_reg = miiphy_getemac_offset ();
- /* see if it is ready for 1000 nsec */
- i = 0;
-
- while ((in32 (EMAC_STACR + emac_reg) & EMAC_STACR_OC) == 0) {
- if (i > 5)
- return -1;
- udelay (7);
- i++;
- }
- sta_reg = 0;
- sta_reg = reg; /* reg address */
- /* set clock (50Mhz) and read flags */
-#if defined(CONFIG_440GX)
- sta_reg |= EMAC_STACR_WRITE;
-#else
- sta_reg = (sta_reg | EMAC_STACR_WRITE) & ~EMAC_STACR_CLK_100MHZ;
-#endif
-
-#if defined(CONFIG_PHY_CLK_FREQ) && !defined(CONFIG_440GX)
- sta_reg = sta_reg | CONFIG_PHY_CLK_FREQ; /* Set clock frequency (PLB freq. dependend) */
-#endif
- sta_reg = sta_reg | ((unsigned long) addr << 5); /* Phy address */
- memcpy (&sta_reg, &value, 2); /* put in data */
-
- out32 (EMAC_STACR + emac_reg, sta_reg);
-
- /* wait for completion */
- i = 0;
- sta_reg = in32 (EMAC_STACR + emac_reg);
- while ((sta_reg & EMAC_STACR_OC) == 0) {
- udelay (7);
- if (i > 5)
- return -1;
- i++;
- sta_reg = in32 (EMAC_STACR + emac_reg);
- }
-
- if ((sta_reg & EMAC_STACR_PHYE) != 0)
- return -1;
- return 0;
-
-} /* phy_write */
-
-#endif /* CONFIG_405GP */