diff options
Diffstat (limited to 'drivers/ddr/fsl/fsl_ddr_gen4.c')
| -rw-r--r-- | drivers/ddr/fsl/fsl_ddr_gen4.c | 169 |
1 files changed, 168 insertions, 1 deletions
diff --git a/drivers/ddr/fsl/fsl_ddr_gen4.c b/drivers/ddr/fsl/fsl_ddr_gen4.c index d9fce7d..49e4688 100644 --- a/drivers/ddr/fsl/fsl_ddr_gen4.c +++ b/drivers/ddr/fsl/fsl_ddr_gen4.c @@ -1,5 +1,5 @@ /* - * Copyright 2014 Freescale Semiconductor, Inc. + * Copyright 2014-2015 Freescale Semiconductor, Inc. * * SPDX-License-Identifier: GPL-2.0+ */ @@ -11,6 +11,22 @@ #include <fsl_immap.h> #include <fsl_ddr.h> +#ifdef CONFIG_SYS_FSL_ERRATUM_A008511 +static void set_wait_for_bits_clear(void *ptr, u32 value, u32 bits) +{ + int timeout = 1000; + + ddr_out32(ptr, value); + + while (ddr_in32(ptr) & bits) { + udelay(100); + timeout--; + } + if (timeout <= 0) + puts("Error: A007865 wait for clear timeout.\n"); +} +#endif /* CONFIG_SYS_FSL_ERRATUM_A008511 */ + #if (CONFIG_CHIP_SELECTS_PER_CTRL > 4) #error Invalid setting for CONFIG_CHIP_SELECTS_PER_CTRL #endif @@ -36,6 +52,16 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, defined(CONFIG_SYS_FSL_ERRATUM_A008514) u32 *eddrtqcr1; #endif +#ifdef CONFIG_SYS_FSL_ERRATUM_A008511 + u32 temp32, mr6; +#endif +#ifdef CONFIG_FSL_DDR_BIST + u32 mtcr, err_detect, err_sbe; + u32 cs0_bnds, cs1_bnds, cs2_bnds, cs3_bnds, cs0_config; +#endif +#ifdef CONFIG_FSL_DDR_BIST + char buffer[CONFIG_SYS_CBSIZE]; +#endif switch (ctrl_num) { case 0: @@ -214,6 +240,21 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, ddr_setbits32(ddr->debug[28], 0x9 << 20); #endif +#ifdef CONFIG_SYS_FSL_ERRATUM_A008511 + /* Part 1 of 2 */ + /* This erraum only applies to verion 5.2.0 */ + if (fsl_ddr_get_version(ctrl_num) == 0x50200) { + /* Disable DRAM VRef training */ + ddr_out32(&ddr->ddr_cdr2, + regs->ddr_cdr2 & ~DDR_CDR2_VREF_TRAIN_EN); + /* Disable deskew */ + ddr_out32(&ddr->debug[28], 0x400); + /* Disable D_INIT */ + ddr_out32(&ddr->sdram_cfg_2, + regs->ddr_sdram_cfg_2 & ~SDRAM_CFG2_D_INIT); + ddr_out32(&ddr->debug[25], 0x9000); + } +#endif /* * For RDIMMs, JEDEC spec requires clocks to be stable before reset is * deasserted. Clocks start when any chip select is enabled and clock @@ -261,6 +302,66 @@ step2: mb(); isb(); +#ifdef CONFIG_SYS_FSL_ERRATUM_A008511 + /* Part 2 of 2 */ + /* This erraum only applies to verion 5.2.0 */ + if (fsl_ddr_get_version(ctrl_num) == 0x50200) { + /* Wait for idle */ + timeout = 200; + while (!(ddr_in32(&ddr->debug[1]) & 0x2) && + (timeout > 0)) { + udelay(100); + timeout--; + } + if (timeout <= 0) { + printf("Controler %d timeout, debug_2 = %x\n", + ctrl_num, ddr_in32(&ddr->debug[1])); + } + /* Set VREF */ + for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { + if (!(regs->cs[i].config & SDRAM_CS_CONFIG_EN)) + continue; + + mr6 = (regs->ddr_sdram_mode_10 >> 16) | + MD_CNTL_MD_EN | + MD_CNTL_CS_SEL(i) | + MD_CNTL_MD_SEL(6) | + 0x00200000; + temp32 = mr6 | 0xc0; + set_wait_for_bits_clear(&ddr->sdram_md_cntl, + temp32, MD_CNTL_MD_EN); + udelay(1); + debug("MR6 = 0x%08x\n", temp32); + temp32 = mr6 | 0xf0; + set_wait_for_bits_clear(&ddr->sdram_md_cntl, + temp32, MD_CNTL_MD_EN); + udelay(1); + debug("MR6 = 0x%08x\n", temp32); + temp32 = mr6 | 0x70; + set_wait_for_bits_clear(&ddr->sdram_md_cntl, + temp32, MD_CNTL_MD_EN); + udelay(1); + debug("MR6 = 0x%08x\n", temp32); + } + ddr_out32(&ddr->sdram_md_cntl, 0); + ddr_out32(&ddr->debug[28], 0); /* Enable deskew */ + ddr_out32(&ddr->debug[1], 0x400); /* restart deskew */ + /* wait for idle */ + timeout = 200; + while (!(ddr_in32(&ddr->debug[1]) & 0x2) && + (timeout > 0)) { + udelay(100); + timeout--; + } + if (timeout <= 0) { + printf("Controler %d timeout, debug_2 = %x\n", + ctrl_num, ddr_in32(&ddr->debug[1])); + } + /* Restore D_INIT */ + ddr_out32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2); + } +#endif /* CONFIG_SYS_FSL_ERRATUM_A008511 */ + total_gb_size_per_controller = 0; for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { if (!(regs->cs[i].config & 0x80000000)) @@ -309,4 +410,70 @@ step2: ddr_out32(&ddr->sdram_cfg_2, temp_sdram_cfg); } #endif + +#ifdef CONFIG_FSL_DDR_BIST +#define BIST_PATTERN1 0xFFFFFFFF +#define BIST_PATTERN2 0x0 +#define BIST_CR 0x80010000 +#define BIST_CR_EN 0x80000000 +#define BIST_CR_STAT 0x00000001 +#define CTLR_INTLV_MASK 0x20000000 + /* Perform build-in test on memory. Three-way interleaving is not yet + * supported by this code. */ + if (getenv_f("ddr_bist", buffer, CONFIG_SYS_CBSIZE) >= 0) { + puts("Running BIST test. This will take a while..."); + cs0_config = ddr_in32(&ddr->cs0_config); + if (cs0_config & CTLR_INTLV_MASK) { + cs0_bnds = ddr_in32(&cs0_bnds); + cs1_bnds = ddr_in32(&cs1_bnds); + cs2_bnds = ddr_in32(&cs2_bnds); + cs3_bnds = ddr_in32(&cs3_bnds); + /* set bnds to non-interleaving */ + ddr_out32(&cs0_bnds, (cs0_bnds & 0xfffefffe) >> 1); + ddr_out32(&cs1_bnds, (cs1_bnds & 0xfffefffe) >> 1); + ddr_out32(&cs2_bnds, (cs2_bnds & 0xfffefffe) >> 1); + ddr_out32(&cs3_bnds, (cs3_bnds & 0xfffefffe) >> 1); + } + ddr_out32(&ddr->mtp1, BIST_PATTERN1); + ddr_out32(&ddr->mtp2, BIST_PATTERN1); + ddr_out32(&ddr->mtp3, BIST_PATTERN2); + ddr_out32(&ddr->mtp4, BIST_PATTERN2); + ddr_out32(&ddr->mtp5, BIST_PATTERN1); + ddr_out32(&ddr->mtp6, BIST_PATTERN1); + ddr_out32(&ddr->mtp7, BIST_PATTERN2); + ddr_out32(&ddr->mtp8, BIST_PATTERN2); + ddr_out32(&ddr->mtp9, BIST_PATTERN1); + ddr_out32(&ddr->mtp10, BIST_PATTERN2); + mtcr = BIST_CR; + ddr_out32(&ddr->mtcr, mtcr); + timeout = 100; + while (timeout > 0 && (mtcr & BIST_CR_EN)) { + mdelay(1000); + timeout--; + mtcr = ddr_in32(&ddr->mtcr); + } + if (timeout <= 0) + puts("Timeout\n"); + else + puts("Done\n"); + err_detect = ddr_in32(&ddr->err_detect); + err_sbe = ddr_in32(&ddr->err_sbe); + if (mtcr & BIST_CR_STAT) { + printf("BIST test failed on controller %d.\n", + ctrl_num); + } + if (err_detect || (err_sbe & 0xffff)) { + printf("ECC error detected on controller %d.\n", + ctrl_num); + } + + if (cs0_config & CTLR_INTLV_MASK) { + /* restore bnds registers */ + ddr_out32(&cs0_bnds, cs0_bnds); + ddr_out32(&cs1_bnds, cs1_bnds); + ddr_out32(&cs2_bnds, cs2_bnds); + ddr_out32(&cs3_bnds, cs3_bnds); + } + } +#endif } |