summaryrefslogtreecommitdiff
path: root/drivers/usb/eth/r8152.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/eth/r8152.h')
-rw-r--r--drivers/usb/eth/r8152.h631
1 files changed, 631 insertions, 0 deletions
diff --git a/drivers/usb/eth/r8152.h b/drivers/usb/eth/r8152.h
new file mode 100644
index 0000000..cd44da2
--- /dev/null
+++ b/drivers/usb/eth/r8152.h
@@ -0,0 +1,631 @@
+/*
+ * Copyright (c) 2015 Realtek Semiconductor Corp. All rights reserved.
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ *
+ */
+
+#ifndef _RTL8152_ETH_H
+#define _RTL8152_ETH_H
+
+#define R8152_BASE_NAME "r8152"
+
+#define PLA_IDR 0xc000
+#define PLA_RCR 0xc010
+#define PLA_RMS 0xc016
+#define PLA_RXFIFO_CTRL0 0xc0a0
+#define PLA_RXFIFO_CTRL1 0xc0a4
+#define PLA_RXFIFO_CTRL2 0xc0a8
+#define PLA_DMY_REG0 0xc0b0
+#define PLA_FMC 0xc0b4
+#define PLA_CFG_WOL 0xc0b6
+#define PLA_TEREDO_CFG 0xc0bc
+#define PLA_MAR 0xcd00
+#define PLA_BACKUP 0xd000
+#define PAL_BDC_CR 0xd1a0
+#define PLA_TEREDO_TIMER 0xd2cc
+#define PLA_REALWOW_TIMER 0xd2e8
+#define PLA_LEDSEL 0xdd90
+#define PLA_LED_FEATURE 0xdd92
+#define PLA_PHYAR 0xde00
+#define PLA_BOOT_CTRL 0xe004
+#define PLA_GPHY_INTR_IMR 0xe022
+#define PLA_EEE_CR 0xe040
+#define PLA_EEEP_CR 0xe080
+#define PLA_MAC_PWR_CTRL 0xe0c0
+#define PLA_MAC_PWR_CTRL2 0xe0ca
+#define PLA_MAC_PWR_CTRL3 0xe0cc
+#define PLA_MAC_PWR_CTRL4 0xe0ce
+#define PLA_WDT6_CTRL 0xe428
+#define PLA_TCR0 0xe610
+#define PLA_TCR1 0xe612
+#define PLA_MTPS 0xe615
+#define PLA_TXFIFO_CTRL 0xe618
+#define PLA_RSTTALLY 0xe800
+#define BIST_CTRL 0xe810
+#define PLA_CR 0xe813
+#define PLA_CRWECR 0xe81c
+#define PLA_CONFIG12 0xe81e /* CONFIG1, CONFIG2 */
+#define PLA_CONFIG34 0xe820 /* CONFIG3, CONFIG4 */
+#define PLA_CONFIG5 0xe822
+#define PLA_PHY_PWR 0xe84c
+#define PLA_OOB_CTRL 0xe84f
+#define PLA_CPCR 0xe854
+#define PLA_MISC_0 0xe858
+#define PLA_MISC_1 0xe85a
+#define PLA_OCP_GPHY_BASE 0xe86c
+#define PLA_TALLYCNT 0xe890
+#define PLA_SFF_STS_7 0xe8de
+#define PLA_PHYSTATUS 0xe908
+#define PLA_BP_BA 0xfc26
+#define PLA_BP_0 0xfc28
+#define PLA_BP_1 0xfc2a
+#define PLA_BP_2 0xfc2c
+#define PLA_BP_3 0xfc2e
+#define PLA_BP_4 0xfc30
+#define PLA_BP_5 0xfc32
+#define PLA_BP_6 0xfc34
+#define PLA_BP_7 0xfc36
+#define PLA_BP_EN 0xfc38
+
+#define USB_USB2PHY 0xb41e
+#define USB_SSPHYLINK2 0xb428
+#define USB_U2P3_CTRL 0xb460
+#define USB_CSR_DUMMY1 0xb464
+#define USB_CSR_DUMMY2 0xb466
+#define USB_DEV_STAT 0xb808
+#define USB_CONNECT_TIMER 0xcbf8
+#define USB_BURST_SIZE 0xcfc0
+#define USB_USB_CTRL 0xd406
+#define USB_PHY_CTRL 0xd408
+#define USB_TX_AGG 0xd40a
+#define USB_RX_BUF_TH 0xd40c
+#define USB_USB_TIMER 0xd428
+#define USB_RX_EARLY_TIMEOUT 0xd42c
+#define USB_RX_EARLY_SIZE 0xd42e
+#define USB_PM_CTRL_STATUS 0xd432
+#define USB_TX_DMA 0xd434
+#define USB_TOLERANCE 0xd490
+#define USB_LPM_CTRL 0xd41a
+#define USB_UPS_CTRL 0xd800
+#define USB_MISC_0 0xd81a
+#define USB_POWER_CUT 0xd80a
+#define USB_AFE_CTRL2 0xd824
+#define USB_WDT11_CTRL 0xe43c
+#define USB_BP_BA 0xfc26
+#define USB_BP_0 0xfc28
+#define USB_BP_1 0xfc2a
+#define USB_BP_2 0xfc2c
+#define USB_BP_3 0xfc2e
+#define USB_BP_4 0xfc30
+#define USB_BP_5 0xfc32
+#define USB_BP_6 0xfc34
+#define USB_BP_7 0xfc36
+#define USB_BP_EN 0xfc38
+
+/* OCP Registers */
+#define OCP_ALDPS_CONFIG 0x2010
+#define OCP_EEE_CONFIG1 0x2080
+#define OCP_EEE_CONFIG2 0x2092
+#define OCP_EEE_CONFIG3 0x2094
+#define OCP_BASE_MII 0xa400
+#define OCP_EEE_AR 0xa41a
+#define OCP_EEE_DATA 0xa41c
+#define OCP_PHY_STATUS 0xa420
+#define OCP_POWER_CFG 0xa430
+#define OCP_EEE_CFG 0xa432
+#define OCP_SRAM_ADDR 0xa436
+#define OCP_SRAM_DATA 0xa438
+#define OCP_DOWN_SPEED 0xa442
+#define OCP_EEE_ABLE 0xa5c4
+#define OCP_EEE_ADV 0xa5d0
+#define OCP_EEE_LPABLE 0xa5d2
+#define OCP_PHY_STATE 0xa708 /* nway state for 8153 */
+#define OCP_ADC_CFG 0xbc06
+
+/* SRAM Register */
+#define SRAM_LPF_CFG 0x8012
+#define SRAM_10M_AMP1 0x8080
+#define SRAM_10M_AMP2 0x8082
+#define SRAM_IMPEDANCE 0x8084
+
+/* PLA_RCR */
+#define RCR_AAP 0x00000001
+#define RCR_APM 0x00000002
+#define RCR_AM 0x00000004
+#define RCR_AB 0x00000008
+#define RCR_ACPT_ALL (RCR_AAP | RCR_APM | RCR_AM | RCR_AB)
+
+/* PLA_RXFIFO_CTRL0 */
+#define RXFIFO_THR1_NORMAL 0x00080002
+#define RXFIFO_THR1_OOB 0x01800003
+
+/* PLA_RXFIFO_CTRL1 */
+#define RXFIFO_THR2_FULL 0x00000060
+#define RXFIFO_THR2_HIGH 0x00000038
+#define RXFIFO_THR2_OOB 0x0000004a
+#define RXFIFO_THR2_NORMAL 0x00a0
+
+/* PLA_RXFIFO_CTRL2 */
+#define RXFIFO_THR3_FULL 0x00000078
+#define RXFIFO_THR3_HIGH 0x00000048
+#define RXFIFO_THR3_OOB 0x0000005a
+#define RXFIFO_THR3_NORMAL 0x0110
+
+/* PLA_TXFIFO_CTRL */
+#define TXFIFO_THR_NORMAL 0x00400008
+#define TXFIFO_THR_NORMAL2 0x01000008
+
+/* PLA_DMY_REG0 */
+#define ECM_ALDPS 0x0002
+
+/* PLA_FMC */
+#define FMC_FCR_MCU_EN 0x0001
+
+/* PLA_EEEP_CR */
+#define EEEP_CR_EEEP_TX 0x0002
+
+/* PLA_WDT6_CTRL */
+#define WDT6_SET_MODE 0x0010
+
+/* PLA_TCR0 */
+#define TCR0_TX_EMPTY 0x0800
+#define TCR0_AUTO_FIFO 0x0080
+
+/* PLA_TCR1 */
+#define VERSION_MASK 0x7cf0
+
+/* PLA_MTPS */
+#define MTPS_JUMBO (12 * 1024 / 64)
+#define MTPS_DEFAULT (6 * 1024 / 64)
+
+/* PLA_RSTTALLY */
+#define TALLY_RESET 0x0001
+
+/* PLA_CR */
+#define PLA_CR_RST 0x10
+#define PLA_CR_RE 0x08
+#define PLA_CR_TE 0x04
+
+/* PLA_BIST_CTRL */
+#define BIST_CTRL_SW_RESET (0x10 << 24)
+
+/* PLA_CRWECR */
+#define CRWECR_NORAML 0x00
+#define CRWECR_CONFIG 0xc0
+
+/* PLA_OOB_CTRL */
+#define NOW_IS_OOB 0x80
+#define TXFIFO_EMPTY 0x20
+#define RXFIFO_EMPTY 0x10
+#define LINK_LIST_READY 0x02
+#define DIS_MCU_CLROOB 0x01
+#define FIFO_EMPTY (TXFIFO_EMPTY | RXFIFO_EMPTY)
+
+/* PLA_PHY_PWR */
+#define PLA_PHY_PWR_LLR (LINK_LIST_READY << 24)
+#define PLA_PHY_PWR_TXEMP (TXFIFO_EMPTY << 24)
+
+/* PLA_MISC_1 */
+#define RXDY_GATED_EN 0x0008
+
+/* PLA_SFF_STS_7 */
+#define RE_INIT_LL 0x8000
+#define MCU_BORW_EN 0x4000
+
+/* PLA_CPCR */
+#define CPCR_RX_VLAN 0x0040
+
+/* PLA_CFG_WOL */
+#define MAGIC_EN 0x0001
+
+/* PLA_TEREDO_CFG */
+#define TEREDO_SEL 0x8000
+#define TEREDO_WAKE_MASK 0x7f00
+#define TEREDO_RS_EVENT_MASK 0x00fe
+#define OOB_TEREDO_EN 0x0001
+
+/* PAL_BDC_CR */
+#define ALDPS_PROXY_MODE 0x0001
+
+/* PLA_CONFIG34 */
+#define LINK_ON_WAKE_EN 0x0010
+#define LINK_OFF_WAKE_EN 0x0008
+
+/* PLA_CONFIG5 */
+#define BWF_EN 0x0040
+#define MWF_EN 0x0020
+#define UWF_EN 0x0010
+#define LAN_WAKE_EN 0x0002
+
+/* PLA_LED_FEATURE */
+#define LED_MODE_MASK 0x0700
+
+/* PLA_PHY_PWR */
+#define TX_10M_IDLE_EN 0x0080
+#define PFM_PWM_SWITCH 0x0040
+
+/* PLA_MAC_PWR_CTRL */
+#define D3_CLK_GATED_EN 0x00004000
+#define MCU_CLK_RATIO 0x07010f07
+#define MCU_CLK_RATIO_MASK 0x0f0f0f0f
+#define ALDPS_SPDWN_RATIO 0x0f87
+
+/* PLA_MAC_PWR_CTRL2 */
+#define EEE_SPDWN_RATIO 0x8007
+
+/* PLA_MAC_PWR_CTRL3 */
+#define PKT_AVAIL_SPDWN_EN 0x0100
+#define SUSPEND_SPDWN_EN 0x0004
+#define U1U2_SPDWN_EN 0x0002
+#define L1_SPDWN_EN 0x0001
+
+/* PLA_MAC_PWR_CTRL4 */
+#define PWRSAVE_SPDWN_EN 0x1000
+#define RXDV_SPDWN_EN 0x0800
+#define TX10MIDLE_EN 0x0100
+#define TP100_SPDWN_EN 0x0020
+#define TP500_SPDWN_EN 0x0010
+#define TP1000_SPDWN_EN 0x0008
+#define EEE_SPDWN_EN 0x0001
+
+/* PLA_GPHY_INTR_IMR */
+#define GPHY_STS_MSK 0x0001
+#define SPEED_DOWN_MSK 0x0002
+#define SPDWN_RXDV_MSK 0x0004
+#define SPDWN_LINKCHG_MSK 0x0008
+
+/* PLA_PHYAR */
+#define PHYAR_FLAG 0x80000000
+
+/* PLA_EEE_CR */
+#define EEE_RX_EN 0x0001
+#define EEE_TX_EN 0x0002
+
+/* PLA_BOOT_CTRL */
+#define AUTOLOAD_DONE 0x0002
+
+/* USB_USB2PHY */
+#define USB2PHY_SUSPEND 0x0001
+#define USB2PHY_L1 0x0002
+
+/* USB_SSPHYLINK2 */
+#define pwd_dn_scale_mask 0x3ffe
+#define pwd_dn_scale(x) ((x) << 1)
+
+/* USB_CSR_DUMMY1 */
+#define DYNAMIC_BURST 0x0001
+
+/* USB_CSR_DUMMY2 */
+#define EP4_FULL_FC 0x0001
+
+/* USB_DEV_STAT */
+#define STAT_SPEED_MASK 0x0006
+#define STAT_SPEED_HIGH 0x0000
+#define STAT_SPEED_FULL 0x0002
+
+/* USB_TX_AGG */
+#define TX_AGG_MAX_THRESHOLD 0x03
+
+/* USB_RX_BUF_TH */
+#define RX_THR_SUPPER 0x0c350180
+#define RX_THR_HIGH 0x7a120180
+#define RX_THR_SLOW 0xffff0180
+
+/* USB_TX_DMA */
+#define TEST_MODE_DISABLE 0x00000001
+#define TX_SIZE_ADJUST1 0x00000100
+
+/* USB_UPS_CTRL */
+#define POWER_CUT 0x0100
+
+/* USB_PM_CTRL_STATUS */
+#define RESUME_INDICATE 0x0001
+
+/* USB_USB_CTRL */
+#define RX_AGG_DISABLE 0x0010
+#define RX_ZERO_EN 0x0080
+
+/* USB_U2P3_CTRL */
+#define U2P3_ENABLE 0x0001
+
+/* USB_POWER_CUT */
+#define PWR_EN 0x0001
+#define PHASE2_EN 0x0008
+
+/* USB_MISC_0 */
+#define PCUT_STATUS 0x0001
+
+/* USB_RX_EARLY_TIMEOUT */
+#define COALESCE_SUPER 85000U
+#define COALESCE_HIGH 250000U
+#define COALESCE_SLOW 524280U
+
+/* USB_WDT11_CTRL */
+#define TIMER11_EN 0x0001
+
+/* USB_LPM_CTRL */
+/* bit 4 ~ 5: fifo empty boundary */
+#define FIFO_EMPTY_1FB 0x30 /* 0x1fb * 64 = 32448 bytes */
+/* bit 2 ~ 3: LMP timer */
+#define LPM_TIMER_MASK 0x0c
+#define LPM_TIMER_500MS 0x04 /* 500 ms */
+#define LPM_TIMER_500US 0x0c /* 500 us */
+#define ROK_EXIT_LPM 0x02
+
+/* USB_AFE_CTRL2 */
+#define SEN_VAL_MASK 0xf800
+#define SEN_VAL_NORMAL 0xa000
+#define SEL_RXIDLE 0x0100
+
+/* OCP_ALDPS_CONFIG */
+#define ENPWRSAVE 0x8000
+#define ENPDNPS 0x0200
+#define LINKENA 0x0100
+#define DIS_SDSAVE 0x0010
+
+/* OCP_PHY_STATUS */
+#define PHY_STAT_MASK 0x0007
+#define PHY_STAT_LAN_ON 3
+#define PHY_STAT_PWRDN 5
+
+/* OCP_POWER_CFG */
+#define EEE_CLKDIV_EN 0x8000
+#define EN_ALDPS 0x0004
+#define EN_10M_PLLOFF 0x0001
+
+/* OCP_EEE_CONFIG1 */
+#define RG_TXLPI_MSK_HFDUP 0x8000
+#define RG_MATCLR_EN 0x4000
+#define EEE_10_CAP 0x2000
+#define EEE_NWAY_EN 0x1000
+#define TX_QUIET_EN 0x0200
+#define RX_QUIET_EN 0x0100
+#define sd_rise_time_mask 0x0070
+#define sd_rise_time(x) (min((x), 7) << 4) /* bit 4 ~ 6 */
+#define RG_RXLPI_MSK_HFDUP 0x0008
+#define SDFALLTIME 0x0007 /* bit 0 ~ 2 */
+
+/* OCP_EEE_CONFIG2 */
+#define RG_LPIHYS_NUM 0x7000 /* bit 12 ~ 15 */
+#define RG_DACQUIET_EN 0x0400
+#define RG_LDVQUIET_EN 0x0200
+#define RG_CKRSEL 0x0020
+#define RG_EEEPRG_EN 0x0010
+
+/* OCP_EEE_CONFIG3 */
+#define fast_snr_mask 0xff80
+#define fast_snr(x) (min((x), 0x1ff) << 7) /* bit 7 ~ 15 */
+#define RG_LFS_SEL 0x0060 /* bit 6 ~ 5 */
+#define MSK_PH 0x0006 /* bit 0 ~ 3 */
+
+/* OCP_EEE_AR */
+/* bit[15:14] function */
+#define FUN_ADDR 0x0000
+#define FUN_DATA 0x4000
+/* bit[4:0] device addr */
+
+/* OCP_EEE_CFG */
+#define CTAP_SHORT_EN 0x0040
+#define EEE10_EN 0x0010
+
+/* OCP_DOWN_SPEED */
+#define EN_10M_BGOFF 0x0080
+
+/* OCP_PHY_STATE */
+#define TXDIS_STATE 0x01
+#define ABD_STATE 0x02
+
+/* OCP_ADC_CFG */
+#define CKADSEL_L 0x0100
+#define ADC_EN 0x0080
+#define EN_EMI_L 0x0040
+
+/* SRAM_LPF_CFG */
+#define LPF_AUTO_TUNE 0x8000
+
+/* SRAM_10M_AMP1 */
+#define GDAC_IB_UPALL 0x0008
+
+/* SRAM_10M_AMP2 */
+#define AMP_DN 0x0200
+
+/* SRAM_IMPEDANCE */
+#define RX_DRIVING_MASK 0x6000
+
+#define RTL8152_MAX_TX 4
+#define RTL8152_MAX_RX 10
+#define INTBUFSIZE 2
+#define CRC_SIZE 4
+#define TX_ALIGN 4
+#define RX_ALIGN 8
+
+#define INTR_LINK 0x0004
+
+#define RTL8152_REQT_READ 0xc0
+#define RTL8152_REQT_WRITE 0x40
+#define RTL8152_REQ_GET_REGS 0x05
+#define RTL8152_REQ_SET_REGS 0x05
+
+#define BYTE_EN_DWORD 0xff
+#define BYTE_EN_WORD 0x33
+#define BYTE_EN_BYTE 0x11
+#define BYTE_EN_SIX_BYTES 0x3f
+#define BYTE_EN_START_MASK 0x0f
+#define BYTE_EN_END_MASK 0xf0
+
+#define RTL8152_ETH_FRAME_LEN 1514
+#define RTL8152_AGG_BUF_SZ 2048
+
+#define RTL8152_RMS (RTL8152_ETH_FRAME_LEN + CRC_SIZE)
+#define RTL8153_RMS (RTL8152_ETH_FRAME_LEN + CRC_SIZE)
+#define RTL8152_TX_TIMEOUT (5 * HZ)
+
+#define MCU_TYPE_PLA 0x0100
+#define MCU_TYPE_USB 0x0000
+
+/* The forced speed, 10Mb, 100Mb, gigabit. */
+#define SPEED_10 10
+#define SPEED_100 100
+#define SPEED_1000 1000
+
+#define SPEED_UNKNOWN -1
+
+/* Duplex, half or full. */
+#define DUPLEX_HALF 0x00
+#define DUPLEX_FULL 0x01
+#define DUPLEX_UNKNOWN 0xff
+
+/* Enable or disable autonegotiation. */
+#define AUTONEG_DISABLE 0x00
+#define AUTONEG_ENABLE 0x01
+
+/* Generic MII registers. */
+#define MII_BMCR 0x00 /* Basic mode control register */
+#define MII_BMSR 0x01 /* Basic mode status register */
+#define MII_PHYSID1 0x02 /* PHYS ID 1 */
+#define MII_PHYSID2 0x03 /* PHYS ID 2 */
+#define MII_ADVERTISE 0x04 /* Advertisement control reg */
+#define MII_LPA 0x05 /* Link partner ability reg */
+#define MII_EXPANSION 0x06 /* Expansion register */
+#define MII_CTRL1000 0x09 /* 1000BASE-T control */
+#define MII_STAT1000 0x0a /* 1000BASE-T status */
+#define MII_MMD_CTRL 0x0d /* MMD Access Control Register */
+#define MII_MMD_DATA 0x0e /* MMD Access Data Register */
+#define MII_ESTATUS 0x0f /* Extended Status */
+#define MII_DCOUNTER 0x12 /* Disconnect counter */
+#define MII_FCSCOUNTER 0x13 /* False carrier counter */
+#define MII_NWAYTEST 0x14 /* N-way auto-neg test reg */
+#define MII_RERRCOUNTER 0x15 /* Receive error counter */
+#define MII_SREVISION 0x16 /* Silicon revision */
+#define MII_RESV1 0x17 /* Reserved... */
+#define MII_LBRERROR 0x18 /* Lpback, rx, bypass error */
+#define MII_PHYADDR 0x19 /* PHY address */
+#define MII_RESV2 0x1a /* Reserved... */
+#define MII_TPISTATUS 0x1b /* TPI status for 10mbps */
+#define MII_NCONFIG 0x1c /* Network interface config */
+
+#define TIMEOUT_RESOLUTION 50
+#define PHY_CONNECT_TIMEOUT 5000
+#define USB_BULK_SEND_TIMEOUT 5000
+#define USB_BULK_RECV_TIMEOUT 5000
+#define R8152_WAIT_TIMEOUT 2000
+
+struct rx_desc {
+ __le32 opts1;
+#define RD_CRC BIT(15)
+#define RX_LEN_MASK 0x7fff
+
+ __le32 opts2;
+#define RD_UDP_CS BIT(23)
+#define RD_TCP_CS BIT(22)
+#define RD_IPV6_CS BIT(20)
+#define RD_IPV4_CS BIT(19)
+
+ __le32 opts3;
+#define IPF BIT(23) /* IP checksum fail */
+#define UDPF BIT(22) /* UDP checksum fail */
+#define TCPF BIT(21) /* TCP checksum fail */
+#define RX_VLAN_TAG BIT(16)
+
+ __le32 opts4;
+ __le32 opts5;
+ __le32 opts6;
+};
+
+struct tx_desc {
+ __le32 opts1;
+#define TX_FS BIT(31) /* First segment of a packet */
+#define TX_LS BIT(30) /* Final segment of a packet */
+#define LGSEND BIT(29)
+#define GTSENDV4 BIT(28)
+#define GTSENDV6 BIT(27)
+#define GTTCPHO_SHIFT 18
+#define GTTCPHO_MAX 0x7fU
+#define TX_LEN_MAX 0x3ffffU
+
+ __le32 opts2;
+#define UDP_CS BIT(31) /* Calculate UDP/IP checksum */
+#define TCP_CS BIT(30) /* Calculate TCP/IP checksum */
+#define IPV4_CS BIT(29) /* Calculate IPv4 checksum */
+#define IPV6_CS BIT(28) /* Calculate IPv6 checksum */
+#define MSS_SHIFT 17
+#define MSS_MAX 0x7ffU
+#define TCPHO_SHIFT 17
+#define TCPHO_MAX 0x7ffU
+#define TX_VLAN_TAG BIT(16)
+};
+
+enum rtl_version {
+ RTL_VER_UNKNOWN = 0,
+ RTL_VER_01,
+ RTL_VER_02,
+ RTL_VER_03,
+ RTL_VER_04,
+ RTL_VER_05,
+ RTL_VER_06,
+ RTL_VER_07,
+ RTL_VER_MAX
+};
+
+enum rtl_register_content {
+ _1000bps = 0x10,
+ _100bps = 0x08,
+ _10bps = 0x04,
+ LINK_STATUS = 0x02,
+ FULL_DUP = 0x01,
+};
+
+struct r8152 {
+ struct usb_device *udev;
+ struct usb_interface *intf;
+ bool supports_gmii;
+
+ struct rtl_ops {
+ void (*init)(struct r8152 *);
+ int (*enable)(struct r8152 *);
+ void (*disable)(struct r8152 *);
+ void (*up)(struct r8152 *);
+ void (*down)(struct r8152 *);
+ void (*unload)(struct r8152 *);
+ } rtl_ops;
+
+ u32 coalesce;
+ u16 ocp_base;
+
+ u8 version;
+};
+
+int generic_ocp_write(struct r8152 *tp, u16 index, u16 byteen,
+ u16 size, void *data, u16 type);
+int generic_ocp_read(struct r8152 *tp, u16 index, u16 size,
+ void *data, u16 type);
+
+int pla_ocp_read(struct r8152 *tp, u16 index, u16 size, void *data);
+int pla_ocp_write(struct r8152 *tp, u16 index, u16 byteen,
+ u16 size, void *data);
+
+int usb_ocp_read(struct r8152 *tp, u16 index, u16 size, void *data);
+int usb_ocp_write(struct r8152 *tp, u16 index, u16 byteen,
+ u16 size, void *data);
+
+u32 ocp_read_dword(struct r8152 *tp, u16 type, u16 index);
+void ocp_write_dword(struct r8152 *tp, u16 type, u16 index, u32 data);
+
+u16 ocp_read_word(struct r8152 *tp, u16 type, u16 index);
+void ocp_write_word(struct r8152 *tp, u16 type, u16 index, u32 data);
+
+u8 ocp_read_byte(struct r8152 *tp, u16 type, u16 index);
+void ocp_write_byte(struct r8152 *tp, u16 type, u16 index, u32 data);
+
+u16 ocp_reg_read(struct r8152 *tp, u16 addr);
+void ocp_reg_write(struct r8152 *tp, u16 addr, u16 data);
+
+void sram_write(struct r8152 *tp, u16 addr, u16 data);
+
+int r8152_wait_for_bit(struct r8152 *tp, bool ocp_reg, u16 type, u16 index,
+ const u32 mask, bool set, unsigned int timeout);
+
+void r8152b_firmware(struct r8152 *tp);
+void r8153_firmware(struct r8152 *tp);
+#endif