4 files changed, 16 insertions, 104 deletions

diff --git a/drivers/usb/host/dwc2.c b/drivers/usb/host/dwc2.c
index 541c0f9..5ef6deb 100644
--- a/drivers/usb/host/dwc2.c
+++ b/drivers/usb/host/dwc2.c
@@ -823,12 +823,13 @@ int chunk_msg(struct dwc2_priv *priv, struct usb_device *dev,
 		       (*pid << DWC2_HCTSIZ_PID_OFFSET),
 		       &hc_regs->hctsiz);
 
-		if (!in) {
-			memcpy(priv->aligned_buffer, (char *)buffer + done, len);
+		if (!in && xfer_len) {
+			memcpy(priv->aligned_buffer, (char *)buffer + done,
+			       xfer_len);
 
 			flush_dcache_range((unsigned long)priv->aligned_buffer,
 				(unsigned long)((void *)priv->aligned_buffer +
-				roundup(len, ARCH_DMA_MINALIGN)));
+				roundup(xfer_len, ARCH_DMA_MINALIGN)));
 		}
 
 		writel(phys_to_bus((unsigned long)priv->aligned_buffer),
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index c85dbce..c664b16 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -279,56 +279,16 @@ static inline u8 ehci_encode_speed(enum usb_device_speed speed)
 static void ehci_update_endpt2_dev_n_port(struct usb_device *udev,
 					  struct QH *qh)
 {
-	struct usb_device *ttdev;
-	int parent_devnum;
+	uint8_t portnr = 0;
+	uint8_t hubaddr = 0;
 
 	if (udev->speed != USB_SPEED_LOW && udev->speed != USB_SPEED_FULL)
 		return;
 
-	/*
-	 * For full / low speed devices we need to get the devnum and portnr of
-	 * the tt, so of the first upstream usb-2 hub, there may be usb-1 hubs
-	 * in the tree before that one!
-	 */
-#ifdef CONFIG_DM_USB
-	/*
-	 * When called from usb-uclass.c: usb_scan_device() udev->dev points
-	 * to the parent udevice, not the actual udevice belonging to the
-	 * udev as the device is not instantiated yet. So when searching
-	 * for the first usb-2 parent start with udev->dev not
-	 * udev->dev->parent .
-	 */
-	struct udevice *parent;
-	struct usb_device *uparent;
-
-	ttdev = udev;
-	parent = udev->dev;
-	uparent = dev_get_parent_priv(parent);
-
-	while (uparent->speed != USB_SPEED_HIGH) {
-		struct udevice *dev = parent;
-
-		if (device_get_uclass_id(dev->parent) != UCLASS_USB_HUB) {
-			printf("ehci: Error cannot find high-speed parent of usb-1 device\n");
-			return;
-		}
-
-		ttdev = dev_get_parent_priv(dev);
-		parent = dev->parent;
-		uparent = dev_get_parent_priv(parent);
-	}
-	parent_devnum = uparent->devnum;
-#else
-	ttdev = udev;
-	while (ttdev->parent && ttdev->parent->speed != USB_SPEED_HIGH)
-		ttdev = ttdev->parent;
-	if (!ttdev->parent)
-		return;
-	parent_devnum = ttdev->parent->devnum;
-#endif
+	usb_find_usb2_hub_address_port(udev, &hubaddr, &portnr);
 
-	qh->qh_endpt2 |= cpu_to_hc32(QH_ENDPT2_PORTNUM(ttdev->portnr) |
-				     QH_ENDPT2_HUBADDR(parent_devnum));
+	qh->qh_endpt2 |= cpu_to_hc32(QH_ENDPT2_PORTNUM(portnr) |
+				     QH_ENDPT2_HUBADDR(hubaddr));
 }
 
 static int
diff --git a/drivers/usb/musb-new/musb_host.c b/drivers/usb/musb-new/musb_host.c
index 40b9c66..2515447 100644
--- a/drivers/usb/musb-new/musb_host.c
+++ b/drivers/usb/musb-new/musb_host.c
@@ -2092,9 +2092,13 @@ int musb_urb_enqueue(
 			}
 #else
 			if (tt_needed(musb, urb->dev)) {
-				u16 hub_port = find_tt(urb->dev);
-				qh->h_addr_reg = (u8) (hub_port >> 8);
-				qh->h_port_reg = (u8) (hub_port & 0xff);
+				uint8_t portnr = 0;
+				uint8_t hubaddr = 0;
+				usb_find_usb2_hub_address_port(urb->dev,
+							       &hubaddr,
+							       &portnr);
+				qh->h_addr_reg = hubaddr;
+				qh->h_port_reg = portnr;
 			}
 #endif
 		}
diff --git a/drivers/usb/musb-new/usb-compat.h b/drivers/usb/musb-new/usb-compat.h
index 1c41e2a..760bd78 100644
--- a/drivers/usb/musb-new/usb-compat.h
+++ b/drivers/usb/musb-new/usb-compat.h
@@ -68,38 +68,6 @@ static inline int usb_hcd_unmap_urb_for_dma(struct usb_hcd *hcd,
 }
 
 #ifdef CONFIG_DM_USB
-static inline u16 find_tt(struct usb_device *udev)
-{
-	struct udevice *parent;
-	struct usb_device *uparent, *ttdev;
-
-	/*
-	 * When called from usb-uclass.c: usb_scan_device() udev->dev points
-	 * to the parent udevice, not the actual udevice belonging to the
-	 * udev as the device is not instantiated yet. So when searching
-	 * for the first usb-2 parent start with udev->dev not
-	 * udev->dev->parent .
-	 */
-	ttdev = udev;
-	parent = udev->dev;
-	uparent = dev_get_parent_priv(parent);
-
-	while (uparent->speed != USB_SPEED_HIGH) {
-		struct udevice *dev = parent;
-
-		if (device_get_uclass_id(dev->parent) != UCLASS_USB_HUB) {
-			printf("musb: Error cannot find high speed parent of usb-1 device\n");
-			return 0;
-		}
-
-		ttdev = dev_get_parent_priv(dev);
-		parent = dev->parent;
-		uparent = dev_get_parent_priv(parent);
-	}
-
-	return (uparent->devnum << 8) | (ttdev->portnr - 1);
-}
-
 static inline struct usb_device *usb_dev_get_parent(struct usb_device *udev)
 {
 	struct udevice *parent = udev->dev->parent;
@@ -129,27 +97,6 @@ static inline struct usb_device *usb_dev_get_parent(struct usb_device *udev)
 	return NULL;
 }
 #else
-static inline u16 find_tt(struct usb_device *dev)
-{
-	u8 chid;
-	u8 hub;
-
-	/* Find out the nearest parent which is high speed */
-	while (dev->parent->parent != NULL)
-		if (dev->parent->speed != USB_SPEED_HIGH)
-			dev = dev->parent;
-		else
-			break;
-
-	/* determine the port address at that hub */
-	hub = dev->parent->devnum;
-	for (chid = 0; chid < USB_MAXCHILDREN; chid++)
-		if (dev->parent->children[chid] == dev)
-			break;
-
-	return (hub << 8) | chid;
-}
-
 static inline struct usb_device *usb_dev_get_parent(struct usb_device *dev)
 {
 	return dev->parent;