diff options
Diffstat (limited to 'include/configs/afeb9260.h')
| -rw-r--r-- | include/configs/afeb9260.h | 156 |
1 files changed, 0 insertions, 156 deletions
diff --git a/include/configs/afeb9260.h b/include/configs/afeb9260.h deleted file mode 100644 index 932a309..0000000 --- a/include/configs/afeb9260.h +++ /dev/null @@ -1,156 +0,0 @@ -/* - * (C) Copyright 2008 Sergey Lapin <slapin@ossfans.org> - * - * Configuation settings for the AFEB9260 board. - * Based on configuration for AT91SAM9260-EK - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H -#define CONFIG_AT91SAM9260 /* Atmel AT91SAM9260 SoC*/ -#include <asm/arch/hardware.h> - -#define CONFIG_SYS_TEXT_BASE 0x21f00000 - -/* ARM asynchronous clock */ -#define CONFIG_SYS_AT91_MAIN_CLOCK 18429952 /* from 18.432 MHz crystal */ -#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 - -#define CONFIG_BOARD_EARLY_INIT_F -#define CONFIG_DISPLAY_CPUINFO - -#define CONFIG_AFEB9260 /* AFEB9260 Board */ -#define CONFIG_ARCH_CPU_INIT - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 - -#define CONFIG_SKIP_LOWLEVEL_INIT - -/* - * Hardware drivers - */ -#define CONFIG_ATMEL_LEGACY -#define CONFIG_AT91_GPIO -#define CONFIG_AT91_PULLUP 1 - -#define CONFIG_ATMEL_USART -#define CONFIG_USART_BASE ATMEL_BASE_DBGU -#define CONFIG_USART_ID ATMEL_ID_SYS -#define CONFIG_USART3 /* USART 3 is DBGU */ - -#define CONFIG_BOOTDELAY 3 - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE 1 -#define CONFIG_BOOTP_BOOTPATH 1 -#define CONFIG_BOOTP_GATEWAY 1 -#define CONFIG_BOOTP_HOSTNAME 1 - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> -#undef CONFIG_CMD_BDI -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_IMI -#undef CONFIG_CMD_IMLS -#undef CONFIG_CMD_LOADS -#undef CONFIG_CMD_SOURCE - -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP - -#define CONFIG_CMD_NAND -#define CONFIG_CMD_USB - -/* SDRAM */ -#define CONFIG_NR_DRAM_BANKS 1 -#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1 -#define CONFIG_SYS_SDRAM_SIZE 0x04000000 /* 64 megs */ - -/* DataFlash */ -#define CONFIG_ATMEL_DATAFLASH_SPI -#define CONFIG_HAS_DATAFLASH -#define CONFIG_SYS_MAX_DATAFLASH_BANKS 2 -#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ -#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 0xD0000000 /* CS1 */ -#define AT91_SPI_CLK 15000000 -#define DATAFLASH_TCSS (0x1a << 16) -#define DATAFLASH_TCHS (0x1 << 24) - -/* NAND flash */ -#ifdef CONFIG_CMD_NAND -#define CONFIG_NAND_ATMEL -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 -#define CONFIG_SYS_NAND_DBW_8 -/* our ALE is AD21 */ -#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) -/* our CLE is AD22 */ -#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) -#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 -#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13 - -#endif - -/* NOR flash - no real flash on this board */ -#define CONFIG_SYS_NO_FLASH - -/* Ethernet */ -#define CONFIG_MACB -#define CONFIG_RESET_PHY_R -#define CONFIG_AT91_WANTS_COMMON_PHY -#define CONFIG_NET_RETRY_COUNT 20 - -/* USB */ -#define CONFIG_USB_ATMEL -#define CONFIG_USB_ATMEL_CLK_SEL_PLLB -#define CONFIG_USB_OHCI_NEW -#define CONFIG_DOS_PARTITION -#define CONFIG_SYS_USB_OHCI_CPU_INIT -#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 /* AT91SAM9260_UHP_BASE */ -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260" -#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1 -#define CONFIG_USB_STORAGE - -#define CONFIG_SYS_LOAD_ADDR 0x21000000 /* load address */ - -#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE -#define CONFIG_SYS_MEMTEST_END 0x21e00000 - -#define CONFIG_SYS_USE_DATAFLASH_CS1 -#define CONFIG_SYS_INIT_SP_ADDR (ATMEL_BASE_SRAM1 + 0x1000 -\ - GENERATED_GBL_DATA_SIZE) - -/* bootstrap + u-boot + env + linux in dataflash on CS1 */ -#define CONFIG_ENV_IS_IN_DATAFLASH -#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 + 0x8400) -#define CONFIG_ENV_OFFSET 0x4200 -#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 + CONFIG_ENV_OFFSET) -#define CONFIG_ENV_SIZE 0x4200 -#define CONFIG_BOOTCOMMAND "nand read 0x21000000 0xa0000 0x200000; bootm" -#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ - "root=/dev/mtdblock2 " \ - "rw rootfstype=jffs2 panic=20" - -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_SYS_PROMPT "U-Boot> " -#define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_LONGHELP -#define CONFIG_CMDLINE_EDITING - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) - -#endif |