diff options
Diffstat (limited to 'include/configs/ulcb.h')
| -rw-r--r-- | include/configs/ulcb.h | 109 |
1 files changed, 109 insertions, 0 deletions
diff --git a/include/configs/ulcb.h b/include/configs/ulcb.h new file mode 100644 index 0000000..921b9e5 --- /dev/null +++ b/include/configs/ulcb.h @@ -0,0 +1,109 @@ +/* + * include/configs/ulcb.h + * This file is ULCB board configuration. + * + * Copyright (C) 2017 Renesas Electronics Corporation + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ULCB_H +#define __ULCB_H + +#undef DEBUG + +#define CONFIG_RCAR_BOARD_STRING "ULCB" + +#include "rcar-gen3-common.h" + +/* M3 ULCB has 2 banks, each with 1 GiB of RAM */ +#if defined(CONFIG_R8A7796) +#undef PHYS_SDRAM_1_SIZE +#undef PHYS_SDRAM_2_SIZE +#define PHYS_SDRAM_1_SIZE (0x40000000u - DRAM_RSV_SIZE) +#define PHYS_SDRAM_2_SIZE 0x40000000u +#endif + +/* SCIF */ +#define CONFIG_CONS_SCIF2 +#define CONFIG_CONS_INDEX 2 +#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_S3D4_CLK_FREQ + +/* [A] Hyper Flash */ +/* use to RPC(SPI Multi I/O Bus Controller) */ + +/* Ethernet RAVB */ +#define CONFIG_NET_MULTI +#define CONFIG_PHY_MICREL +#define CONFIG_BITBANGMII +#define CONFIG_BITBANGMII_MULTI + +/* Board Clock */ +/* XTAL_CLK : 33.33MHz */ +#define RCAR_XTAL_CLK 33333333u +#define CONFIG_SYS_CLK_FREQ RCAR_XTAL_CLK +/* ch0to2 CPclk, ch3to11 S3D2_PEREclk, ch12to14 S3D2_RTclk */ +/* CPclk 16.66MHz, S3D2 133.33MHz , S3D4 66.66MHz */ +#define CONFIG_CP_CLK_FREQ (CONFIG_SYS_CLK_FREQ / 2) +#define CONFIG_PLL1_CLK_FREQ (CONFIG_SYS_CLK_FREQ * 192 / 2) +#define CONFIG_S3D2_CLK_FREQ (266666666u/2) +#define CONFIG_S3D4_CLK_FREQ (266666666u/4) + +/* Generic Timer Definitions (use in assembler source) */ +#define COUNTER_FREQUENCY 0xFE502A /* 16.66MHz from CPclk */ + +/* Generic Interrupt Controller Definitions */ +#define CONFIG_GICV2 +#define GICD_BASE 0xF1010000 +#define GICC_BASE 0xF1020000 + +/* CPLD SPI */ +#define CONFIG_CMD_SPI +#define CONFIG_SOFT_SPI +#define SPI_DELAY udelay(0) +#define SPI_SDA(val) ulcb_softspi_sda(val) +#define SPI_SCL(val) ulcb_softspi_scl(val) +#define SPI_READ ulcb_softspi_read() +#ifndef __ASSEMBLY__ +void ulcb_softspi_sda(int); +void ulcb_softspi_scl(int); +unsigned char ulcb_softspi_read(void); +#endif + +/* i2c */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_SH +#define CONFIG_SYS_I2C_SLAVE 0x60 +#define CONFIG_SYS_I2C_SH_NUM_CONTROLLERS 1 +#define CONFIG_SYS_I2C_SH_SPEED0 400000 +#define CONFIG_SH_I2C_DATA_HIGH 4 +#define CONFIG_SH_I2C_DATA_LOW 5 +#define CONFIG_SH_I2C_CLOCK 10000000 + +#define CONFIG_SYS_I2C_POWERIC_ADDR 0x30 + +/* USB */ +#ifdef CONFIG_R8A7795 +#define CONFIG_USB_MAX_CONTROLLER_COUNT 3 +#else +#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 +#endif + +/* SDHI */ +#define CONFIG_SH_SDHI_FREQ 200000000 + +/* Environment in eMMC, at the end of 2nd "boot sector" */ +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE) +#define CONFIG_SYS_MMC_ENV_DEV 1 +#define CONFIG_SYS_MMC_ENV_PART 2 + +/* Module stop status bits */ +/* MFIS, SCIF1 */ +#define CONFIG_SMSTP2_ENA 0x00002040 +/* SCIF2 */ +#define CONFIG_SMSTP3_ENA 0x00000400 +/* INTC-AP, IRQC */ +#define CONFIG_SMSTP4_ENA 0x00000180 + +#endif /* __ULCB_H */ |