summaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
Diffstat (limited to 'include')
-rw-r--r--include/amba_clcd.h77
-rw-r--r--include/asm-generic/global_data_flags.h28
-rw-r--r--include/at45.h68
-rw-r--r--include/at91rm9200_i2c.h114
-rw-r--r--include/at91rm9200_net.h50
-rw-r--r--include/bcm5221.h88
-rw-r--r--include/configs/AdderUSB.h35
-rw-r--r--include/configs/EXBITGEN.h190
-rw-r--r--include/configs/MVS1.h384
-rw-r--r--include/configs/ORSG.h282
-rw-r--r--include/configs/mpq101.h359
-rw-r--r--include/configs/tb0229.h175
-rw-r--r--include/cramfs/cramfs_fs_sb.h19
-rw-r--r--include/da9030.h102
-rw-r--r--include/dm9161.h127
-rw-r--r--include/faraday/ftsdc021.h13
-rw-r--r--include/ks8721.h75
-rw-r--r--include/linux/mtd/inftl-user.h89
-rw-r--r--include/linux/mtd/jffs2-user.h35
-rw-r--r--include/smiLynxEM.h163
20 files changed, 0 insertions, 2473 deletions
diff --git a/include/amba_clcd.h b/include/amba_clcd.h
deleted file mode 100644
index db80517..0000000
--- a/include/amba_clcd.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * Register definitions for the AMBA CLCD logic cell.
- *
- * derived from David A Rusling, although rearranged as a C structure
- * linux/include/asm-arm/hardware/amba_clcd.h -- Integrator LCD panel.
- *
- * Copyright (C) 2001 ARM Limited
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-/*
- * CLCD Controller Internal Register addresses
- */
-struct clcd_registers {
- u32 tim0; /* 0x00 */
- u32 tim1;
- u32 tim2;
- u32 tim3;
- u32 ubas; /* 0x10 */
- u32 lbas;
-#if !defined(CONFIG_ARCH_VERSATILE) && !defined(CONFIG_ARCH_REALVIEW)
- u32 ienb;
- u32 cntl;
-#else /* Someone rearranged these two registers on the Versatile */
- u32 cntl;
- u32 ienb;
-#endif
- u32 stat; /* 0x20 */
- u32 intr;
- u32 ucur;
- u32 lcur;
- u32 unused[0x74]; /* 0x030..0x1ff */
- u32 palette[0x80]; /* 0x200..0x3ff */
-};
-
-/* Bit definition for TIM2 */
-#define TIM2_CLKSEL (1 << 5)
-#define TIM2_IVS (1 << 11)
-#define TIM2_IHS (1 << 12)
-#define TIM2_IPC (1 << 13)
-#define TIM2_IOE (1 << 14)
-#define TIM2_BCD (1 << 26)
-
-/* Bit definitions for control register */
-#define CNTL_LCDEN (1 << 0)
-#define CNTL_LCDBPP1 (0 << 1)
-#define CNTL_LCDBPP2 (1 << 1)
-#define CNTL_LCDBPP4 (2 << 1)
-#define CNTL_LCDBPP8 (3 << 1)
-#define CNTL_LCDBPP16 (4 << 1)
-#define CNTL_LCDBPP16_565 (6 << 1)
-#define CNTL_LCDBPP24 (5 << 1)
-#define CNTL_LCDBW (1 << 4)
-#define CNTL_LCDTFT (1 << 5)
-#define CNTL_LCDMONO8 (1 << 6)
-#define CNTL_LCDDUAL (1 << 7)
-#define CNTL_BGR (1 << 8)
-#define CNTL_BEBO (1 << 9)
-#define CNTL_BEPO (1 << 10)
-#define CNTL_LCDPWR (1 << 11)
-#define CNTL_LCDVCOMP(x) ((x) << 12)
-#define CNTL_LDMAFIFOTIME (1 << 15)
-#define CNTL_WATERMARK (1 << 16)
-
-/* u-boot specific: information passed by the board file */
-struct clcd_config {
- struct clcd_registers *address;
- u32 tim0;
- u32 tim1;
- u32 tim2;
- u32 tim3;
- u32 cntl;
- unsigned long pixclock;
-};
diff --git a/include/asm-generic/global_data_flags.h b/include/asm-generic/global_data_flags.h
deleted file mode 100644
index bb57fb6..0000000
--- a/include/asm-generic/global_data_flags.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * transitional header until we merge global_data.h
- *
- * (C) Copyright 2000-2010
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#ifndef __ASM_GENERIC_GLOBAL_DATA_FLAGS_H
-#define __ASM_GENERIC_GLOBAL_DATA_FLAGS_H
-
-/*
- * Global Data Flags
- *
- * Note: The low 16 bits are expected for common code. If your arch
- * really needs to add your own, use the high 16bits.
- */
-#define GD_FLG_RELOC 0x0001 /* Code was relocated to RAM */
-#define GD_FLG_DEVINIT 0x0002 /* Devices have been initialized */
-#define GD_FLG_SILENT 0x0004 /* Silent mode */
-#define GD_FLG_POSTFAIL 0x0008 /* Critical POST test failed */
-#define GD_FLG_POSTSTOP 0x0010 /* POST seqeunce aborted */
-#define GD_FLG_LOGINIT 0x0020 /* Log Buffer has been initialized */
-#define GD_FLG_DISABLE_CONSOLE 0x0040 /* Disable console (in & out) */
-#define GD_FLG_ENV_READY 0x0080 /* Environment imported into hash table */
-
-#endif
diff --git a/include/at45.h b/include/at45.h
deleted file mode 100644
index df649ba..0000000
--- a/include/at45.h
+++ /dev/null
@@ -1,68 +0,0 @@
-#ifndef _AT45_H_
-#define _AT45_H_
-#ifdef CONFIG_DATAFLASH_MMC_SELECT
-extern void AT91F_SelectMMC(void);
-extern void AT91F_SelectSPI(void);
-extern int AT91F_GetMuxStatus(void);
-#endif
-extern void AT91F_SpiInit(void);
-extern void AT91F_SpiEnable(int cs);
-extern unsigned int AT91F_SpiWrite ( AT91PS_DataflashDesc pDesc );
-extern AT91S_DataFlashStatus AT91F_DataFlashSendCommand(
- AT91PS_DataFlash pDataFlash,
- unsigned char OpCode,
- unsigned int CmdSize,
- unsigned int DataflashAddress);
-extern AT91S_DataFlashStatus AT91F_DataFlashGetStatus (
- AT91PS_DataflashDesc pDesc);
-extern AT91S_DataFlashStatus AT91F_DataFlashWaitReady (
- AT91PS_DataflashDesc pDataFlashDesc,
- unsigned int timeout);
-extern AT91S_DataFlashStatus AT91F_DataFlashContinuousRead (
- AT91PS_DataFlash pDataFlash,
- int src,
- unsigned char *dataBuffer,
- int sizeToRead );
-extern AT91S_DataFlashStatus AT91F_DataFlashPagePgmBuf(
- AT91PS_DataFlash pDataFlash,
- unsigned char *src,
- unsigned int dest,
- unsigned int SizeToWrite);
-extern AT91S_DataFlashStatus AT91F_MainMemoryToBufferTransfert(
- AT91PS_DataFlash pDataFlash,
- unsigned char BufferCommand,
- unsigned int page);
-extern AT91S_DataFlashStatus AT91F_DataFlashWriteBuffer (
- AT91PS_DataFlash pDataFlash,
- unsigned char BufferCommand,
- unsigned char *dataBuffer,
- unsigned int bufferAddress,
- int SizeToWrite );
-extern AT91S_DataFlashStatus AT91F_PageErase(
- AT91PS_DataFlash pDataFlash,
- unsigned int page);
-extern AT91S_DataFlashStatus AT91F_BlockErase(
- AT91PS_DataFlash pDataFlash,
- unsigned int block);
-extern AT91S_DataFlashStatus AT91F_WriteBufferToMain (
- AT91PS_DataFlash pDataFlash,
- unsigned char BufferCommand,
- unsigned int dest );
-extern AT91S_DataFlashStatus AT91F_PartialPageWrite (
- AT91PS_DataFlash pDataFlash,
- unsigned char *src,
- unsigned int dest,
- unsigned int size);
-extern AT91S_DataFlashStatus AT91F_DataFlashWrite(
- AT91PS_DataFlash pDataFlash,
- unsigned char *src,
- int dest,
- int size );
-extern int AT91F_DataFlashRead(
- AT91PS_DataFlash pDataFlash,
- unsigned long addr,
- unsigned long size,
- char *buffer);
-extern int AT91F_DataflashProbe(int cs, AT91PS_DataflashDesc pDesc);
-
-#endif
diff --git a/include/at91rm9200_i2c.h b/include/at91rm9200_i2c.h
deleted file mode 100644
index 4866606..0000000
--- a/include/at91rm9200_i2c.h
+++ /dev/null
@@ -1,114 +0,0 @@
-/* ---------------------------------------------------------------------------- */
-/* ATMEL Microcontroller Software Support - ROUSSET - */
-/* ---------------------------------------------------------------------------- */
-/* The software is delivered "AS IS" without warranty or condition of any */
-/* kind, either express, implied or statutory. This includes without */
-/* limitation any warranty or condition with respect to merchantability or */
-/* fitness for any particular purpose, or against the infringements of */
-/* intellectual property rights of others. */
-/* ---------------------------------------------------------------------------- */
-/* File Name : at91rm9200_i2c.h */
-/* Object : AT91RM9200 / TWI definitions */
-/* Generated : AT91 SW Application Group 12/03/2002 (10:48:02) */
-/* */
-/* ---------------------------------------------------------------------------- */
-
-#ifndef AT91RM9200_TWI_H
-#define AT91RM9200_TWI_H
-
-/* ******************************************************************************/
-/* SOFTWARE API DEFINITION FOR Two-wire Interface */
-/* ******************************************************************************/
-#ifndef __ASSEMBLY__
-
-typedef struct _AT91S_TWI {
- AT91_REG TWI_CR; /* Control Register */
- AT91_REG TWI_MMR; /* Master Mode Register */
- AT91_REG TWI_SMR; /* Slave Mode Register */
- AT91_REG TWI_IADR; /* Internal Address Register */
- AT91_REG TWI_CWGR; /* Clock Waveform Generator Register */
- AT91_REG Reserved0[3];
- AT91_REG TWI_SR; /* Status Register */
- AT91_REG TWI_IER; /* Interrupt Enable Register */
- AT91_REG TWI_IDR; /* Interrupt Disable Register */
- AT91_REG TWI_IMR; /* Interrupt Mask Register */
- AT91_REG TWI_RHR; /* Receive Holding Register */
- AT91_REG TWI_THR; /* Transmit Holding Register */
- AT91_REG Reserved1[50];
- AT91_REG TWI_RPR; /* Receive Pointer Register */
- AT91_REG TWI_RCR; /* Receive Counter Register */
- AT91_REG TWI_TPR; /* Transmit Pointer Register */
- AT91_REG TWI_TCR; /* Transmit Counter Register */
- AT91_REG TWI_RNPR; /* Receive Next Pointer Register */
- AT91_REG TWI_RNCR; /* Receive Next Counter Register */
- AT91_REG TWI_TNPR; /* Transmit Next Pointer Register */
- AT91_REG TWI_TNCR; /* Transmit Next Counter Register */
- AT91_REG TWI_PTCR; /* PDC Transfer Control Register */
- AT91_REG TWI_PTSR; /* PDC Transfer Status Register */
-} AT91S_TWI, *AT91PS_TWI;
-
-#endif
-
-/* -------- TWI_CR : (TWI Offset: 0x0) TWI Control Register -------- */
-#define AT91C_TWI_START (0x1 << 0) /* (TWI) Send a START Condition */
-#define AT91C_TWI_STOP (0x1 << 1) /* (TWI) Send a STOP Condition */
-#define AT91C_TWI_MSEN (0x1 << 2) /* (TWI) TWI Master Transfer Enabled */
-#define AT91C_TWI_MSDIS (0x1 << 3) /* (TWI) TWI Master Transfer Disabled */
-#define AT91C_TWI_SVEN (0x1 << 4) /* (TWI) TWI Slave Transfer Enabled */
-#define AT91C_TWI_SVDIS (0x1 << 5) /* (TWI) TWI Slave Transfer Disabled */
-#define AT91C_TWI_SWRST (0x1 << 7) /* (TWI) Software Reset */
-/* -------- TWI_MMR : (TWI Offset: 0x4) TWI Master Mode Register -------- */
-#define AT91C_TWI_IADRSZ (0x3 << 8) /* (TWI) Internal Device Address Size */
-#define AT91C_TWI_IADRSZ_NO (0x0 << 8) /* (TWI) No internal device address */
-#define AT91C_TWI_IADRSZ_1_BYTE (0x1 << 8) /* (TWI) One-byte internal device address */
-#define AT91C_TWI_IADRSZ_2_BYTE (0x2 << 8) /* (TWI) Two-byte internal device address */
-#define AT91C_TWI_IADRSZ_3_BYTE (0x3 << 8) /* (TWI) Three-byte internal device address */
-#define AT91C_TWI_MREAD (0x1 << 12) /* (TWI) Master Read Direction */
-#define AT91C_TWI_DADR (0x7F << 6) /* (TWI) Device Address */
-/* -------- TWI_SMR : (TWI Offset: 0x8) TWI Slave Mode Register -------- */
-#define AT91C_TWI_SADR (0x7F << 16) /* (TWI) Slave Device Address */
-/* -------- TWI_CWGR : (TWI Offset: 0x10) TWI Clock Waveform Generator Register -------- */
-#define AT91C_TWI_CLDIV (0xFF << 0) /* (TWI) Clock Low Divider */
-#define AT91C_TWI_CHDIV (0xFF << 8) /* (TWI) Clock High Divider */
-#define AT91C_TWI_CKDIV (0x7 << 16) /* (TWI) Clock Divider */
-/* -------- TWI_SR : (TWI Offset: 0x20) TWI Status Register -------- */
-#define AT91C_TWI_TXCOMP (0x1 << 0) /* (TWI) Transmission Completed */
-#define AT91C_TWI_RXRDY (0x1 << 1) /* (TWI) Receive holding register ReaDY */
-#define AT91C_TWI_TXRDY (0x1 << 2) /* (TWI) Transmit holding register ReaDY*/
-#define AT91C_TWI_SVREAD (0x1 << 3) /* (TWI) Slave Read */
-#define AT91C_TWI_SVACC (0x1 << 4) /* (TWI) Slave Access */
-#define AT91C_TWI_GCACC (0x1 << 5) /* (TWI) General Call Access */
-#define AT91C_TWI_OVRE (0x1 << 6) /* (TWI) Overrun Error */
-#define AT91C_TWI_UNRE (0x1 << 7) /* (TWI) Underrun Error */
-#define AT91C_TWI_NACK (0x1 << 8) /* (TWI) Not Acknowledged */
-#define AT91C_TWI_ARBLST (0x1 << 9) /* (TWI) Arbitration Lost */
-/* -------- TWI_IER : (TWI Offset: 0x24) TWI Interrupt Enable Register -------- */
-/* -------- TWI_IDR : (TWI Offset: 0x28) TWI Interrupt Disable Register ------- */
-/* -------- TWI_IMR : (TWI Offset: 0x2c) TWI Interrupt Mask Register -------- */
-
-/*
- i2c Support for Atmel's AT91RM9200 Two-Wire Interface
-
- (c) Rick Bronson
-
- * SPDX-License-Identifier: GPL-2.0+
-*/
-
-#ifndef AT91_I2C_H
-#define AT91_I2C_H
-
-#define AT91C_TWI_CLOCK 100000
-#define AT91C_TWI_SCLOCK (10 * AT91C_MASTER_CLOCK / AT91C_TWI_CLOCK)
-#define AT91C_TWI_CKDIV1 (2 << 16) /* TWI clock divider. NOTE: see Errata #22 */
-
-#if (AT91C_TWI_SCLOCK % 10) >= 5
-#define AT91C_TWI_CLDIV2 ((AT91C_TWI_SCLOCK / 10) - 5)
-#else
-#define AT91C_TWI_CLDIV2 ((AT91C_TWI_SCLOCK / 10) - 6)
-#endif
-#define AT91C_TWI_CLDIV3 ((AT91C_TWI_CLDIV2 + (4 - AT91C_TWI_CLDIV2 % 4)) >> 2)
-
-#define AT91C_EEPROM_I2C_ADDRESS (0x50 << 16)
-
-#endif /* __ASSEMBLY__ */
-#endif /* AT91RM9200_TWI_H */
diff --git a/include/at91rm9200_net.h b/include/at91rm9200_net.h
deleted file mode 100644
index 831cb1e..0000000
--- a/include/at91rm9200_net.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * Ethernet: An implementation of the Ethernet Device Driver suite for the
- * uClinux 2.0.38 operating system. This Driver has been developed
- * for AT75C220 board.
- *
- * NOTE: The driver is implemented for one MAC
- *
- * Version: @(#)at91rm9200_net.h 1.0.0 01/10/2001
- *
- * Authors: Lineo Inc <www.lineo.com>
- *
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef AT91RM9200_ETHERNET
-#define AT91RM9200_ETHERNET
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/hardware.h>
-
-#define ETHERNET_ADDRESS_SIZE 6
-
-typedef unsigned char UCHAR;
-
-/* Interface to drive the physical layer */
-typedef struct _AT91S_PhyOps
-{
- unsigned char (*Init)(AT91S_EMAC *pmac);
- unsigned int (*IsPhyConnected)(AT91S_EMAC *pmac);
- unsigned char (*GetLinkSpeed)(AT91S_EMAC *pmac);
- unsigned char (*AutoNegotiate)(AT91S_EMAC *pmac, int *);
-
-} AT91S_PhyOps,*AT91PS_PhyOps;
-
-
-#define EMAC_DESC_DONE 0x00000001 /* ownership bit */
-#define EMAC_DESC_WRAP 0x00000002 /* bit for wrap */
-
-/****************** function prototypes **********************/
-
-/* MII functions */
-void at91rm9200_EmacEnableMDIO(AT91PS_EMAC p_mac);
-void at91rm9200_EmacDisableMDIO(AT91PS_EMAC p_mac);
-UCHAR at91rm9200_EmacReadPhy(AT91PS_EMAC p_mac, unsigned char RegisterAddress, unsigned short *pInput);
-UCHAR at91rm9200_EmacWritePhy(AT91PS_EMAC p_mac, unsigned char RegisterAddress, unsigned short *pOutput);
-void at91rm9200_GetPhyInterface(AT91PS_PhyOps p_phyops);
-
-#endif /* AT91RM9200_ETHERNET */
diff --git a/include/bcm5221.h b/include/bcm5221.h
deleted file mode 100644
index 4719389..0000000
--- a/include/bcm5221.h
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * Broadcom BCM5221 Ethernet PHY
- *
- * (C) Copyright 2005 REA Elektronik GmbH <www.rea.de>
- * Anders Larsen <alarsen@rea.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#define BCM5221_BMCR 0 /* Basic Mode Control Register */
-#define BCM5221_BMSR 1 /* Basic Mode Status Register */
-#define BCM5221_PHYID1 2 /* PHY Identifier Register 1 */
-#define BCM5221_PHYID2 3 /* PHY Identifier Register 2 */
-#define BCM5221_ANAR 4 /* Auto-negotiation Advertisement Register */
-#define BCM5221_ANLPAR 5 /* Auto-negotiation Link Partner Ability Register */
-#define BCM5221_ANER 6 /* Auto-negotiation Expansion Register */
-#define BCM5221_ACSR 24 /* Auxiliary Control/Status Register */
-#define BCM5221_INTR 26 /* Interrupt Register */
-
-/* --Bit definitions: BCM5221_BMCR */
-#define BCM5221_RESET (1 << 15) /* 1= Software Reset; 0=Normal Operation */
-#define BCM5221_LOOPBACK (1 << 14) /* 1=loopback Enabled; 0=Normal Operation */
-#define BCM5221_SPEED_SELECT (1 << 13) /* 1=100Mbps; 0=10Mbps */
-#define BCM5221_AUTONEG (1 << 12)
-#define BCM5221_POWER_DOWN (1 << 11)
-#define BCM5221_ISOLATE (1 << 10)
-#define BCM5221_RESTART_AUTONEG (1 << 9)
-#define BCM5221_DUPLEX_MODE (1 << 8)
-#define BCM5221_COLLISION_TEST (1 << 7)
-
-/*--Bit definitions: BCM5221_BMSR */
-#define BCM5221_100BASE_T4 (1 << 15)
-#define BCM5221_100BASE_TX_FD (1 << 14)
-#define BCM5221_100BASE_TX_HD (1 << 13)
-#define BCM5221_10BASE_T_FD (1 << 12)
-#define BCM5221_10BASE_T_HD (1 << 11)
-#define BCM5221_MF_PREAMB_SUPPR (1 << 6)
-#define BCM5221_AUTONEG_COMP (1 << 5)
-#define BCM5221_REMOTE_FAULT (1 << 4)
-#define BCM5221_AUTONEG_ABILITY (1 << 3)
-#define BCM5221_LINK_STATUS (1 << 2)
-#define BCM5221_JABBER_DETECT (1 << 1)
-#define BCM5221_EXTEND_CAPAB (1 << 0)
-
-/*--definitions: BCM5221_PHYID1 */
-#define BCM5221_PHYID1_OUI 0x1018
-#define BCM5221_LSB_MASK 0x3F
-
-/*--Bit definitions: BCM5221_ANAR, BCM5221_ANLPAR */
-#define BCM5221_NP (1 << 15)
-#define BCM5221_ACK (1 << 14)
-#define BCM5221_RF (1 << 13)
-#define BCM5221_FCS (1 << 10)
-#define BCM5221_T4 (1 << 9)
-#define BCM5221_TX_FDX (1 << 8)
-#define BCM5221_TX_HDX (1 << 7)
-#define BCM5221_10_FDX (1 << 6)
-#define BCM5221_10_HDX (1 << 5)
-#define BCM5221_AN_IEEE_802_3 0x0001
-
-/*--Bit definitions: BCM5221_ANER */
-#define BCM5221_PDF (1 << 4)
-#define BCM5221_LP_NP_ABLE (1 << 3)
-#define BCM5221_NP_ABLE (1 << 2)
-#define BCM5221_PAGE_RX (1 << 1)
-#define BCM5221_LP_AN_ABLE (1 << 0)
-
-/*--Bit definitions: BCM5221_ACSR */
-#define BCM5221_100 (1 << 1)
-#define BCM5221_FDX (1 << 0)
-
-/*--Bit definitions: BCM5221_INTR */
-#define BCM5221_FDX_LED (1 << 15)
-#define BCM5221_INTR_ENABLE (1 << 14)
-#define BCM5221_FDX_MASK (1 << 11)
-#define BCM5221_SPD_MASK (1 << 10)
-#define BCM5221_LINK_MASK (1 << 9)
-#define BCM5221_INTR_MASK (1 << 8)
-#define BCM5221_FDX_CHG (1 << 3)
-#define BCM5221_SPD_CHG (1 << 2)
-#define BCM5221_LINK_CHG (1 << 1)
-#define BCM5221_INTR_STATUS (1 << 0)
-
-/****************** function prototypes **********************/
-unsigned int bcm5221_IsPhyConnected(AT91PS_EMAC p_mac);
-unsigned char bcm5221_GetLinkSpeed(AT91PS_EMAC p_mac);
-unsigned char bcm5221_AutoNegotiate(AT91PS_EMAC p_mac, int *status);
-unsigned char bcm5221_InitPhy(AT91PS_EMAC p_mac);
diff --git a/include/configs/AdderUSB.h b/include/configs/AdderUSB.h
deleted file mode 100644
index ef76ce4..0000000
--- a/include/configs/AdderUSB.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Copyright (C) 2006 CodeHermit.
- * Bryan O'Donoghue <bodonoghue@codehermit.ie>
- *
- * Provides support for USB console on the Analogue & Micro Adder87x
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __ADDERUSB__
-#define __ADDERUSB__
-
-/* Include the board port */
-#include "Adder.h"
-
-#define CONFIG_USB_DEVICE /* Include UDC driver */
-#define CONFIG_USB_TTY /* Bind the TTY driver to UDC */
-#define CONFIG_SYS_USB_EXTC_CLK 0x02 /* Oscillator on EXTC_CLK 2 */
-#define CONFIG_SYS_USB_BRG_CLK 0x04 /* or use Baud rate generator 0x04 */
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV /* Console is in env */
-
-/* If you have a USB-IF assigned VendorID then you may wish to define
- * your own vendor specific values either in BoardName.h or directly in
- * usbd_vendor_info.h
- */
-
-/*
-#define CONFIG_USBD_MANUFACTURER "CodeHermit.ie"
-#define CONFIG_USBD_PRODUCT_NAME "Das U-Boot"
-#define CONFIG_USBD_VENDORID 0xFFFF
-#define CONFIG_USBD_PRODUCTID_GSERIAL 0xFFFF
-#define CONFIG_USBD_PRODUCTID_CDCACM 0xFFFE
-*/
-
-#endif /* __ADDERUSB_H__ */
diff --git a/include/configs/EXBITGEN.h b/include/configs/EXBITGEN.h
deleted file mode 100644
index 208b599..0000000
--- a/include/configs/EXBITGEN.h
+++ /dev/null
@@ -1,190 +0,0 @@
-/*
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_405GP 1 /* This is a PPC405GP CPU */
-#define CONFIG_4xx 1 /* ...member of PPC4xx family */
-#define CONFIG_EXBITGEN 1 /* on a Exbit Generic board */
-
-#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
-
-#define CONFIG_SYS_CLK_FREQ 25000000 /* external frequency to pll */
-
-/* I2C configuration */
-#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
-#define CONFIG_SYS_I2C_SPEED 40000 /* I2C speed */
-#define CONFIG_SYS_I2C_SLAVE 0x7F /* I2C slave address */
-
-/* environment is in EEPROM */
-#define CONFIG_ENV_IS_IN_EEPROM 1
-#undef CONFIG_ENV_IS_IN_FLASH
-#undef CONFIG_ENV_IS_IN_NVRAM
-
-#ifdef CONFIG_ENV_IS_IN_EEPROM
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x56 /* 1010110 */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* 8-bit internal addressing */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 1 /* ... and 1 bit in I2C address */
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 /* 4 bytes per page */
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 40 /* write takes up to 40 msec */
-#define CONFIG_ENV_OFFSET 4 /* Offset of Environment Sector */
-#define CONFIG_ENV_SIZE 350 /* that is 350 bytes only! */
-#endif
-
-#define CONFIG_BOOTDELAY 10 /* autoboot after 10 seconds */
-/* Explanation:
- autbooting is altogether disabled and cannot be
- enabled if CONFIG_BOOTDELAY is negative.
- If you want shorter bootdelay, then
- - "setenv bootdelay <delay>" to the proper value
-*/
-
-#define CONFIG_BOOTCOMMAND "bootm 20400000 20800000"
-
-#define CONFIG_BOOTARGS "root=/dev/ram " \
- "ramdisk_size=32768 " \
- "console=ttyS0,115200 " \
- "ram=128M debug"
-
-#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
-
-#define CONFIG_MII 1 /* MII PHY management */
-#define CONFIG_PHY_ADDR 0 /* PHY address */
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_PPC4xx_EMAC
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
-
-/* UART configuration */
-#define CONFIG_SYS_BASE_BAUD 691200
-
-/* Default baud rate */
-#define CONFIG_BAUDRATE 115200
-
-/* The following table includes the supported baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE \
- { 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, \
- 57600, 115200, 230400, 460800, 921600 }
-
-#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */
-
-/*-----------------------------------------------------------------------
- * PCI stuff
- *-----------------------------------------------------------------------
- */
-#undef CONFIG_PCI /* no pci support */
-
-/*-----------------------------------------------------------------------
- * External peripheral base address
- *-----------------------------------------------------------------------
- */
-#undef CONFIG_IDE_PCMCIA /* no pcmcia interface required */
-#undef CONFIG_IDE_LED /* no led for ide supported */
-#undef CONFIG_IDE_RESET /* no reset for ide supported */
-
-#define CONFIG_SYS_KEY_REG_BASE_ADDR 0xF0100000
-#define CONFIG_SYS_IR_REG_BASE_ADDR 0xF0200000
-#define CONFIG_SYS_FPGA_REG_BASE_ADDR 0xF0300000
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_FLASH0_BASE 0xFFF80000
-#define CONFIG_SYS_FLASH0_SIZE 0x00080000
-#define CONFIG_SYS_FLASH1_BASE 0x20000000
-#define CONFIG_SYS_FLASH1_SIZE 0x02000000
-#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_FLASH0_BASE
-#define CONFIG_SYS_FLASH_SIZE CONFIG_SYS_FLASH0_SIZE
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_MONITOR_LEN (192 * 1024) /* Reserve 196 kB for Monitor */
-#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
-
-#if CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH0_BASE
-#define CONFIG_SYS_RAMSTART
-#endif
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 5 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-
-#ifdef CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_OFFSET 0x00060000 /* Offset of Environment Sector */
-#define CONFIG_ENV_SIZE 0x00010000 /* Total Size of Environment Sector */
-#define CONFIG_ENV_SECT_SIZE 0x00010000 /* see README - env sector total size */
-#endif
-
-/* On Chip Memory location/size */
-#define CONFIG_SYS_OCM_DATA_ADDR 0xF8000000
-#define CONFIG_SYS_OCM_DATA_SIZE 0x1000
-
-/* Global info and initial stack */
-#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of on-chip SRAM */
-#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#endif
-#endif /* __CONFIG_H */
diff --git a/include/configs/MVS1.h b/include/configs/MVS1.h
deleted file mode 100644
index 73cd2a9..0000000
--- a/include/configs/MVS1.h
+++ /dev/null
@@ -1,384 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC823 1 /* This is a MPC823 CPU */
-#define CONFIG_MVS 1 /* ...on a MVsensor module */
-#define CONFIG_MVS_16BIT_FLASH /* ...with 16-bit flash access */
-#define CONFIG_8xx_GCLK_FREQ 50000000/* ... and a 50 MHz CPU */
-
-#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
-
-#undef CONFIG_8xx_CONS_SMC1 /* Console is *NOT* on SMC1 */
-#define CONFIG_8xx_CONS_SMC2 1 /* Console is on SMC2 */
-#undef CONFIG_8xx_CONS_NONE
-#define CONFIG_BAUDRATE 115200 /* console baudrate */
-#define CONFIG_BOOTDELAY 5 /* autoboot after this many seconds */
-
-#define CONFIG_PREBOOT "echo;" \
- "echo To mount root over NFS use \"run bootnet\";" \
- "echo To mount root from FLASH use \"run bootflash\";" \
- "echo"
-#define CONFIG_BOOTARGS "root=/dev/mtdblock2 rw"
-#define CONFIG_BOOTCOMMAND \
- "bootp; " \
- "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
- "bootm"
-
-#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
-#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */
-
-#define CONFIG_WATCHDOG /* watchdog disabled/enabled */
-
-#undef CONFIG_STATUS_LED /* Status LED disabled/enabled */
-
-#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_VENDOREX
-
-#undef CONFIG_MAC_PARTITION
-#undef CONFIG_DOS_PARTITION
-
-#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
-
-
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_LOADS
-#define CONFIG_CMD_LOADB
-#define CONFIG_CMD_IMI
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_SAVEENV
-#define CONFIG_CMD_BOOTD
-#define CONFIG_CMD_RUN
-
-
-/*
- * Miscellaneous configurable options
- */
-#undef CONFIG_SYS_LONGHELP /* undef to save memory */
-
-#undef CONFIG_SYS_HUSH_PARSER /* Hush parse for U-Boot ?? */
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CONFIG_SYS_IMMR 0xFFF00000
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_FLASH_BASE 0x40000000
-
-#define CONFIG_SYS_MONITOR_LEN (128 << 10) /* Reserve 192 kB for Monitor */
-
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 71 /* max number of sectors on one chip (for AMD320DB chip) */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-
-/* 4MB flash - use bottom sectors of a bottom boot sector flash (16 bit access) */
-#define CONFIG_ENV_OFFSET 0x8000 /* Offset of Environment Sector (bottom boot sector) */
-#define CONFIG_ENV_SIZE 0x2000 /* Used Size of Environment Sector 8k */
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */
-#endif
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control 11-9
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
- */
-#if defined(CONFIG_WATCHDOG)
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
- SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
-#else
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
-#endif
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration 11-6
- *-----------------------------------------------------------------------
- * PCMCIA config., multi-function pin tri-state
- */
-#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
-
-/*-----------------------------------------------------------------------
- * TBSCR - Time Base Status and Control 11-26
- *-----------------------------------------------------------------------
- * Clear Reference Interrupt Status, Timebase freezing enabled
- */
-#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
-
-/*-----------------------------------------------------------------------
- * RTCSC - Real-Time Clock Status and Control Register 11-27
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control 11-31
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
- */
-#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF)
-
-/*-----------------------------------------------------------------------
- * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
- *-----------------------------------------------------------------------
- * Reset PLL lock status sticky bit, timer expired status bit and timer
- * interrupt status bit
- *
- */
-#define CONFIG_SYS_PLPRCR (PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
-
-/*-----------------------------------------------------------------------
- * SCCR - System Clock and reset Control Register 15-27
- *-----------------------------------------------------------------------
- * Set clock output, timebase and RTC source and divider,
- * power management and some other internal clocks
- */
-#define SCCR_MASK SCCR_EBDF11
-#define CONFIG_SYS_SCCR (SCCR_TBS | \
- SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
- SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \
- SCCR_DFALCD00)
-
-/*-----------------------------------------------------------------------
- * PCMCIA stuff
- *-----------------------------------------------------------------------
- *
- */
-#define CONFIG_SYS_PCMCIA_MEM_ADDR (0xE0000000)
-#define CONFIG_SYS_PCMCIA_MEM_SIZE ( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_DMA_ADDR (0xE4000000)
-#define CONFIG_SYS_PCMCIA_DMA_SIZE ( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_ATTRB_ADDR (0xE8000000)
-#define CONFIG_SYS_PCMCIA_ATTRB_SIZE ( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_IO_ADDR (0xEC000000)
-#define CONFIG_SYS_PCMCIA_IO_SIZE ( 64 << 20 )
-
-/*-----------------------------------------------------------------------
- * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
- *-----------------------------------------------------------------------
- */
-
-#define CONFIG_IDE_PCCARD 0 /* **DON'T** Use IDE with PC Card Adapter */
-
-#undef CONFIG_IDE_PCMCIA /* Direct IDE not supported */
-#undef CONFIG_IDE_LED /* LED for ide not supported */
-#undef CONFIG_IDE_RESET /* reset for ide not supported */
-
-#define CONFIG_SYS_IDE_MAXBUS 0 /* max. no. of IDE buses */
-#define CONFIG_SYS_IDE_MAXDEVICE 0 /* max. no. of drives per IDE bus */
-
-
-#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
-
-#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_PCMCIA_MEM_ADDR
-
-/* Offset for data I/O */
-#define CONFIG_SYS_ATA_DATA_OFFSET (CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
-
-/* Offset for normal register accesses */
-#define CONFIG_SYS_ATA_REG_OFFSET (2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
-
-/* Offset for alternate registers */
-#define CONFIG_SYS_ATA_ALT_OFFSET 0x0100
-
-/*-----------------------------------------------------------------------
- *
- *-----------------------------------------------------------------------
- *
- */
-/*#define CONFIG_SYS_DER 0x2002000F*/
-#define CONFIG_SYS_DER 0
-
-/*
- * Init Memory Controller:
- *
- * BR0/1 and OR0/1 (FLASH)
- */
-
-#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */
-#undef FLASH_BASE1_PRELIM
-
-/* used to re-map FLASH both when starting from SRAM or FLASH:
- * restrict access enough to keep SRAM working (if any)
- * but not too much to meddle with FLASH accesses
- */
-#define CONFIG_SYS_REMAP_OR_AM 0x80000000 /* OR addr mask */
-#define CONFIG_SYS_PRELIM_OR_AM 0xE0000000 /* OR addr mask */
-
-
-/*
- * FLASH timing:
- */
-/* 50 MHz CPU - 50 MHz bus: ACS = 00, TRLX = 1, CSNT = 1, SCY = 2, EHTR = 1 */
-#define CONFIG_SYS_OR_TIMING_FLASH (OR_ACS_DIV1 | OR_TRLX | OR_CSNT_SAM | \
- OR_SCY_2_CLK | OR_EHTR | OR_BI)
-/* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1 */
-/*
-#define CONFIG_SYS_OR_TIMING_FLASH (OR_CSNT_SAM | OR_ACS_DIV2 | OR_BI | \
- OR_SCY_5_CLK | OR_EHTR)
-*/
-
-#define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#ifdef CONFIG_MVS_16BIT_FLASH
-#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V )
-#else
-#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_32 | BR_V )
-#endif
-
-#undef CONFIG_SYS_OR1_REMAP
-#undef CONFIG_SYS_OR1_PRELIM
-#undef CONFIG_SYS_BR1_PRELIM
-/*
- * BR2/3 and OR2/3 (SDRAM)
- *
- */
-#define SDRAM_BASE2_PRELIM 0x00000000 /* SDRAM bank #0 */
-#undef SDRAM_BASE3_PRELIM
-#define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB per bank */
-
-/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */
-#define CONFIG_SYS_OR_TIMING_SDRAM 0x00000A00
-
-#define CONFIG_SYS_OR2_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM )
-#define CONFIG_SYS_BR2_PRELIM ((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
-
-#undef CONFIG_SYS_OR3_PRELIM
-#undef CONFIG_SYS_BR3_PRELIM
-
-
-/*
- * Memory Periodic Timer Prescaler
- *
- * The Divider for PTA (refresh timer) configuration is based on an
- * example SDRAM configuration (64 MBit, one bank). The adjustment to
- * the number of chip selects (NCS) and the actually needed refresh
- * rate is done by setting MPTPR.
- *
- * PTA is calculated from
- * PTA = (gclk * Trefresh) / ((2 ^ (2 * DFBRG)) * PTP * NCS)
- *
- * gclk CPU clock (not bus clock!)
- * Trefresh Refresh cycle * 4 (four word bursts used)
- *
- * 4096 Rows from SDRAM example configuration
- * 1000 factor s -> ms
- * 32 PTP (pre-divider from MPTPR) from SDRAM example configuration
- * 4 Number of refresh cycles per period
- * 64 Refresh cycle in ms per number of rows
- * --------------------------------------------
- * Divider = 4096 * 32 * 1000 / (4 * 64) = 512000
- *
- * 50 MHz => 50.000.000 / Divider = 98
- * 66 Mhz => 66.000.000 / Divider = 129
- * 80 Mhz => 80.000.000 / Divider = 156
- */
-#define CONFIG_SYS_MAMR_PTA 98
-
-/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */
-#define CONFIG_SYS_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */
-#define CONFIG_SYS_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */
-
-/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */
-#define CONFIG_SYS_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */
-#define CONFIG_SYS_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */
-
-/*
- * MAMR settings for SDRAM
- */
-
-/* 8 column SDRAM */
-#define CONFIG_SYS_MAMR_8COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
- MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \
- MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
-/* 9 column SDRAM */
-#define CONFIG_SYS_MAMR_9COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
- MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A7 | \
- MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/ORSG.h b/include/configs/ORSG.h
deleted file mode 100644
index 5a9bee3..0000000
--- a/include/configs/ORSG.h
+++ /dev/null
@@ -1,282 +0,0 @@
-/*
- * (C) Copyright 2001
- * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_405GP 1 /* This is a PPC405 CPU */
-#define CONFIG_4xx 1 /* ...member of PPC4xx family */
-#define CONFIG_ORSG 1 /* ...on a ORSG board */
-
-#define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */
-
-#define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */
-
-#define CONFIG_BAUDRATE 9600
-#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */
-
-#undef CONFIG_BOOTARGS
-#define CONFIG_BOOTCOMMAND "go fff00100"
-
-#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
-
-#define CONFIG_PPC4xx_EMAC
-#define CONFIG_MII 1 /* MII PHY management */
-#define CONFIG_PHY_ADDR 0 /* PHY address */
-#define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_BSP
-#define CONFIG_CMD_EEPROM
-
-
-#define CONFIG_MAC_PARTITION
-#define CONFIG_DOS_PARTITION
-
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-
-#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_CONSOLE_INFO_QUIET 1 /* don't print console @ startup*/
-
-#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
-
-#define CONFIG_CONS_INDEX 1 /* Use UART0 */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE 1
-#define CONFIG_SYS_NS16550_CLK get_serial_clock()
-
-#undef CONFIG_SYS_EXT_SERIAL_CLOCK /* no external serial clock used */
-#define CONFIG_SYS_BASE_BAUD 691200
-
-/* The following table includes the supported baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE \
- { 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, \
- 57600, 115200, 230400, 460800, 921600 }
-
-#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */
-
-#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
-
-/*-----------------------------------------------------------------------
- * PCI stuff
- *-----------------------------------------------------------------------
- */
-#define PCI_HOST_ADAPTER 0 /* configure as pci adapter */
-#define PCI_HOST_FORCE 1 /* configure as pci host */
-#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
-
-#define CONFIG_PCI /* include pci support */
-#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
-#define CONFIG_PCI_HOST PCI_HOST_ADAPTER /* select pci adapter */
-#undef CONFIG_PCI_PNP /* no pci plug-and-play */
- /* resource configuration */
-
-#undef CONFIG_PCI_SCAN_SHOW /* print pci devices @ startup */
-
-#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x12FE /* PCI Vendor ID: esd gmbh */
-#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0411 /* PCI Device ID: ORSG */
-#define CONFIG_SYS_PCI_CLASSCODE 0x0b20 /* PCI Class Code: Processor/PPC*/
-#define CONFIG_SYS_PCI_PTM1LA 0x00000000 /* point to sdram */
-#define CONFIG_SYS_PCI_PTM1MS 0xfc000001 /* 64MB, enable hard-wired to 1 */
-#define CONFIG_SYS_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */
-#define CONFIG_SYS_PCI_PTM2LA 0xffc00000 /* point to flash */
-#define CONFIG_SYS_PCI_PTM2MS 0xffc00001 /* 4MB, enable */
-#define CONFIG_SYS_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_FLASH_BASE 0xFFFD0000
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MONITOR_LEN (192 * 1024) /* Reserve 192 kB for Monitor */
-#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-
-#define CONFIG_SYS_FLASH_WORD_SIZE unsigned short /* flash word size (width) */
-#define CONFIG_SYS_FLASH_ADDR0 0x5555 /* 1st address for flash config cycles */
-#define CONFIG_SYS_FLASH_ADDR1 0x2AAA /* 2nd address for flash config cycles */
-/*
- * The following defines are added for buggy IOP480 byte interface.
- * All other boards should use the standard values (CPCI405 etc.)
- */
-#define CONFIG_SYS_FLASH_READ0 0x0000 /* 0 is standard */
-#define CONFIG_SYS_FLASH_READ1 0x0001 /* 1 is standard */
-#define CONFIG_SYS_FLASH_READ2 0x0002 /* 2 is standard */
-
-#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
-
-#if 0 /* Use NVRAM for environment variables */
-/*-----------------------------------------------------------------------
- * NVRAM organization
- */
-#define CONFIG_ENV_IS_IN_NVRAM 1 /* use NVRAM for environment vars */
-#define CONFIG_SYS_NVRAM_BASE_ADDR 0xf0200000 /* NVRAM base address */
-#define CONFIG_SYS_NVRAM_SIZE (32*1024) /* NVRAM size */
-#define CONFIG_ENV_SIZE 0x1000 /* Size of Environment vars */
-#define CONFIG_ENV_ADDR \
- (CONFIG_SYS_NVRAM_BASE_ADDR+CONFIG_SYS_NVRAM_SIZE-CONFIG_ENV_SIZE) /* Env */
-#define CONFIG_SYS_NVRAM_VXWORKS_OFFS 0x6900 /* Offset for VxWorks eth-addr */
-
-#else /* Use EEPROM for environment variables */
-
-#define CONFIG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */
-#define CONFIG_ENV_OFFSET 0x000 /* environment starts at the beginning of the EEPROM */
-#define CONFIG_ENV_SIZE 0x300 /* 768 bytes may be used for env vars */
- /* total size of a CAT24WC08 is 1024 bytes */
-#endif
-
-/*-----------------------------------------------------------------------
- * I2C EEPROM (CAT24WC08) for environment
- */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_PPC4XX
-#define CONFIG_SYS_I2C_PPC4XX_CH0
-#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000
-#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F
-
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT28WC08 */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
-/* mask of address bits that overflow into the "EEPROM chip address" */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x07
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* The Catalyst CAT24WC08 has */
- /* 16 byte page write mode using*/
- /* last 4 bits of the address */
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
-
-/*
- * Init Memory Controller:
- *
- * BR0/1 and OR0/1 (FLASH)
- */
-
-#define FLASH_BASE0_PRELIM 0xFF800000 /* FLASH bank #0 */
-#define FLASH_BASE1_PRELIM 0xFFC00000 /* FLASH bank #1 */
-
-/*-----------------------------------------------------------------------
- * External Bus Controller (EBC) Setup
- */
-
-/* Memory Bank 0 (Flash Bank 0) initialization */
-#define CONFIG_SYS_EBC_PB0AP 0x92015480
-#define CONFIG_SYS_EBC_PB0CR 0xFFC5A000 /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
-
-/* Memory Bank 1 (Flash Bank 1) initialization */
-#define CONFIG_SYS_EBC_PB1AP 0x92015480
-#define CONFIG_SYS_EBC_PB1CR 0xFF85A000 /* BAS=0xFF8,BS=4MB,BU=R/W,BW=16bit */
-
-/* Memory Bank 2 (PLD - FPGA-boot) initialization */
-#define CONFIG_SYS_EBC_PB2AP 0x02015480 /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */
- /* WBN=0x1,WBF=0x1,TH=0x2,RE=0x0,SOR=0x1,BEM=0x0,PEN=0x0*/
-#define CONFIG_SYS_EBC_PB2CR 0xF0018000 /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit */
-
-/* Memory Bank 3 (PLD - OSL) initialization */
-#define CONFIG_SYS_EBC_PB3AP 0x02015480 /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */
- /* WBN=0x1,WBF=0x1,TH=0x2,RE=0x0,SOR=0x1,BEM=0x0,PEN=0x0*/
-#define CONFIG_SYS_EBC_PB3CR 0xF0118000 /* BAS=0xF01,BS=1MB,BU=R/W,BW=8bit */
-
-/* Memory Bank 4 (Spartan2 1) initialization */
-#define CONFIG_SYS_EBC_PB4AP 0x02015580 /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */
- /* WBN=0x1,WBF=0x1,TH=0x2,RE=0x1,SOR=0x1,BEM=0x0,PEN=0x0*/
-#define CONFIG_SYS_EBC_PB4CR 0xF209C000 /* BAS=0xF20,BS=16MB,BU=R/W,BW=32bit*/
-
-/* Memory Bank 5 (Spartan2 2) initialization */
-#define CONFIG_SYS_EBC_PB5AP 0x02015580 /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */
- /* WBN=0x1,WBF=0x1,TH=0x2,RE=0x1,SOR=0x1,BEM=0x0,PEN=0x0*/
-#define CONFIG_SYS_EBC_PB5CR 0xF309C000 /* BAS=0xF30,BS=16MB,BU=R/W,BW=32bit*/
-
-/* Memory Bank 6 (Virtex 1) initialization */
-#define CONFIG_SYS_EBC_PB6AP 0x02015580 /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */
- /* WBN=0x1,WBF=0x1,TH=0x2,RE=0x1,SOR=0x1,BEM=0x0,PEN=0x0*/
-#define CONFIG_SYS_EBC_PB6CR 0xF409A000 /* BAS=0xF40,BS=16MB,BU=R/W,BW=16bit*/
-
-/* Memory Bank 7 (Virtex 2) initialization */
-#define CONFIG_SYS_EBC_PB7AP 0x02015580 /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */
- /* WBN=0x1,WBF=0x1,TH=0x2,RE=0x1,SOR=0x1,BEM=0x0,PEN=0x0*/
-#define CONFIG_SYS_EBC_PB7CR 0xF509A000 /* BAS=0xF50,BS=16MB,BU=R/W,BW=16bit*/
-
-
-#define CONFIG_SYS_VXWORKS_MAC_PTR 0x00000000 /* Pass Ethernet MAC to VxWorks */
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-
-/* use on chip memory ( OCM ) for temperary stack until sdram is tested */
-#define CONFIG_SYS_TEMP_STACK_OCM 1
-
-/* On Chip Memory location */
-#define CONFIG_SYS_OCM_DATA_ADDR 0xF8000000
-#define CONFIG_SYS_OCM_DATA_SIZE 0x1000
-
-#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */
-#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/mpq101.h b/include/configs/mpq101.h
deleted file mode 100644
index 4cac8ee..0000000
--- a/include/configs/mpq101.h
+++ /dev/null
@@ -1,359 +0,0 @@
-/*
- * Copyright 2011 Alex Dubov <oakad@yahoo.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * Merury Computers MPQ101 board configuration file
- *
- */
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#ifdef CONFIG_36BIT
-# define CONFIG_PHYS_64BIT
-#endif
-
-/* High Level Configuration Options */
-#define CONFIG_BOOKE /* BOOKE */
-#define CONFIG_E500 /* BOOKE e500 family */
-#define CONFIG_MPC85xx /* MPC8540/60/55/41/48 */
-#define CONFIG_MPC8548 /* MPC8548 specific */
-#define CONFIG_MPQ101 /* MPQ101 board specific */
-
-#define CONFIG_SYS_SRIO /* enable serial RapidIO */
-#define CONFIG_TSEC_ENET /* tsec ethernet support */
-#define CONFIG_INTERRUPTS /* enable pci, srio, ddr interrupts */
-#define CONFIG_FSL_LAW /* Use common FSL init code */
-
-/*
- * These can be toggled for performance analysis, otherwise use default.
- */
-#define CONFIG_L2_CACHE /* toggle L2 cache */
-#define CONFIG_BTB /* toggle branch predition */
-
-#define CONFIG_PANIC_HANG
-
-/*
- * Only possible on E500 Version 2 or newer cores.
- */
-#define CONFIG_ENABLE_36BIT_PHYS
-
-#ifdef CONFIG_PHYS_64BIT
-# define CONFIG_ADDR_MAP
-# define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */
-#endif
-
-
-#define CONFIG_SYS_CLK_FREQ 33000000 /* sysclk for MPC85xx */
-
-#define CONFIG_SYS_CCSRBAR 0xe0000000
-#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR
-
-/* DDR Setup */
-#define CONFIG_SYS_FSL_DDR2
-
-#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */
-
-#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
-#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory*/
-#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
-
-#define CONFIG_NUM_DDR_CONTROLLERS 1
-#define CONFIG_DIMM_SLOTS_PER_CTLR 1
-#define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
-
-/* Fixed 512MB DDR2 parameters */
-#define CONFIG_SYS_SDRAM_SIZE_LOG 29 /* DDR is 512MB */
-#define CONFIG_SYS_DDR_CS0_BNDS 0x0000001f
-#define CONFIG_SYS_DDR_CS0_CONFIG 0x80014102
-#define CONFIG_SYS_DDR_TIMING_3 0x00010000
-#define CONFIG_SYS_DDR_TIMING_0 0x00260802
-#define CONFIG_SYS_DDR_TIMING_1 0x5c47a432
-#define CONFIG_SYS_DDR_TIMING_1_PERF 0x49352322
-#define CONFIG_SYS_DDR_TIMING_2 0x03984cce
-#define CONFIG_SYS_DDR_TIMING_2_PERF 0x14904cca
-#define CONFIG_SYS_DDR_MODE_1 0x00400442
-#define CONFIG_SYS_DDR_MODE_1_PERF 0x00480432
-#define CONFIG_SYS_DDR_MODE_2 0x00000000
-#define CONFIG_SYS_DDR_MODE_2_PERF 0x00000000
-#define CONFIG_SYS_DDR_INTERVAL 0x08200100
-#define CONFIG_SYS_DDR_INTERVAL_PERF 0x06180100
-#define CONFIG_SYS_DDR_CLK_CTRL 0x03800000
-#define CONFIG_SYS_DDR_CONTROL 0xc3008000 /* Type = DDR2 */
-#define CONFIG_SYS_DDR_CONTROL2 0x04400000
-
-#define CONFIG_SYS_ALT_MEMTEST
-#define CONFIG_SYS_MEMTEST_START 0x0ff00000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x0ffffffc
-
-/*
- * RAM definitions
- */
-#define CONFIG_SYS_INIT_RAM_LOCK
-#define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */
-#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */
-
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE \
- - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
-#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */
-
-/*
- * Local Bus Definitions
- */
-#define CONFIG_SYS_LBC_LCRR 0x00000004 /* LB clock ratio reg */
-#define CONFIG_SYS_LBC_LBCR 0x00000000 /* LB config reg */
-
-
-/*
- * FLASH on the Local Bus
- * One bank, 128M, using the CFI driver.
- */
-#define CONFIG_SYS_BOOT_BLOCK 0xf8000000 /* boot TLB block */
-#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_BOOT_BLOCK /* start of FLASH 128M */
-
-#ifdef CONFIG_PHYS_64BIT
-# define CONFIG_SYS_FLASH_BASE_PHYS 0xff8000000ull
-#else
-# define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE
-#endif
-
-/* 0xf8001801 */
-#define CONFIG_SYS_BR0_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \
- | BR_PS_32 | BR_V)
-
-/* 0xf8006ff7 */
-#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(128) | OR_GPCM_XAM | OR_GPCM_CSNT \
- | OR_GPCM_ACS_DIV2 | OR_GPCM_XACS \
- | OR_GPCM_SCY_15 | OR_GPCM_TRLX \
- | OR_GPCM_EHTR | OR_GPCM_EAD)
-
-#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS}
-#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
-
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 512 /* sectors per device */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
-
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_SYS_FLASH_EMPTY_INFO
-#define CONFIG_SYS_FLASH_AMD_CHECK_DQ7
-/*
- * When initializing flash, if we cannot find the manufacturer ID,
- * assume this is the AMD flash.
- */
-#define CONFIG_ASSUME_AMD_FLASH
-
-/*
- * Environment parameters
- */
-#define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_SYS_USE_PPCENV
-#define ENV_IS_EMBEDDED
-#define CONFIG_ENV_SECT_SIZE 0x40000 /* 256K */
-#define CONFIG_ENV_SIZE 0x800
-
-/* Environment at the start of flash sector, before text. */
-#define CONFIG_ENV_ADDR (CONFIG_SYS_TEXT_BASE - CONFIG_ENV_SIZE)
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
-#define CONFIG_SYS_TEXT_BASE 0xfffc0800
-#define CONFIG_SYS_LDSCRIPT "board/mercury/mpq101/u-boot.lds"
-
-/*
- * Cypress CY7C67200 USB controller on the Local Bus.
- * Not supported by u-boot at present.
- */
-#define CONFIG_SYS_LBC_OPTION_BASE 0xf0000000
-
-#ifdef CONFIG_PHYS_64BIT
-# define CONFIG_SYS_LBC_OPTION_BASE_PHYS 0xff0000000ull
-#else
-# define CONFIG_SYS_LBC_OPTION_BASE_PHYS CONFIG_SYS_LBC_OPTION_BASE
-#endif
-
-/* 0xf0001001 */
-#define CONFIG_SYS_BR1_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_LBC_OPTION_BASE_PHYS) \
- | BR_PS_16 | BR_V)
-
-/* fffff002 */
-#define CONFIG_SYS_OR1_PRELIM (P2SZ_TO_AM(0x8000) | OR_GPCM_XAM \
- | OR_GPCM_BCTLD | OR_GPCM_EHTR)
-
-/*
- * Serial Ports
- */
-#define CONFIG_CONS_INDEX 2
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE 1
-#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
-
-#define CONFIG_SYS_BAUDRATE_TABLE {300, 600, 1200, 2400, 4800, 9600, \
- 19200, 38400, 115200}
-
-#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
-#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
-
-/*
- * I2C buses and peripherals
- */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_FSL
-#define CONFIG_SYS_FSL_I2C_SPEED 400000
-#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F
-#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000
-#define CONFIG_SYS_FSL_I2C2_SPEED 400000
-#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F
-#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100
-#define CONFIG_SYS_I2C_NOPROBES { {0, 0x69} }
-
-/* I2C RTC - M41T81 */
-#define CONFIG_RTC_M41T62
-#define CONFIG_SYS_I2C_RTC_ADDR 0x68
-#define CONFIG_SYS_M41T11_BASE_YEAR 2000
-
-/* I2C EEPROM - 24C256 */
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 12
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
-#define CONFIG_SYS_EEPROM_BUS_NUM 1
-
-/*
- * RapidIO MMU
- */
-#ifdef CONFIG_SYS_SRIO
-# define CONFIG_SRIO1
-# define CONFIG_SYS_SRIO1_MEM_VIRT 0xc0000000
-# define CONFIG_SYS_SRIO1_MEM_SIZE 0x20000000 /* 512M */
-
-# ifdef CONFIG_PHYS_64BIT
-# define CONFIG_SYS_SRIO1_MEM_PHYS 0xfc0000000ull
-# else
-# define CONFIG_SYS_SRIO1_MEM_PHYS CONFIG_SYS_SRIO1_MEM_VIRT
-# endif
-#endif
-
-/*
- * Ethernet
- */
-#ifdef CONFIG_TSEC_ENET
-
-# define CONFIG_MII /* MII PHY management */
-# define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */
-
-# define CONFIG_TSEC1
-# define CONFIG_TSEC1_NAME "eTSEC0"
-# define TSEC1_PHY_ADDR 0x10
-# define TSEC1_PHYIDX 0
-# define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
-
-# define CONFIG_TSEC2
-# define CONFIG_TSEC2_NAME "eTSEC1"
-# define TSEC2_PHY_ADDR 0x11
-# define TSEC2_PHYIDX 0
-# define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
-
-# define CONFIG_TSEC3
-# define CONFIG_TSEC3_NAME "eTSEC2"
-# define TSEC3_PHY_ADDR 0x12
-# define TSEC3_PHYIDX 0
-# define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
-
-# define CONFIG_TSEC4
-# define CONFIG_TSEC4_NAME "eTSEC3"
-# define TSEC4_PHY_ADDR 0x13
-# define TSEC4_PHYIDX 0
-# define TSEC4_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
-
-/* Options are: eTSEC[0-3] */
-# define CONFIG_ETHPRIME "eTSEC0"
-# define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */
-#endif
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SNTP
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_SETEXPR
-#define CONFIG_CMD_JFFS2
-
-/*
- * Miscellaneous configurable options
- */
-
-/* pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT
-#define CONFIG_OF_BOARD_SETUP
-#define CONFIG_OF_STDOUT_VIA_ALIAS
-
-#define CONFIG_FIT /* new uImage format support */
-#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */
-
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-
-
-#define CONFIG_LOADS_ECHO /* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
-
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_CMDLINE_EDITING /* Command-line editing */
-#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
-
-#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
-#define CONFIG_SYS_PROMPT "MPQ-101=> " /* Monitor Command Prompt */
-
-/* Console I/O Buffer Size */
-#ifdef CONFIG_CMD_KGDB
-# define CONFIG_SYS_CBSIZE 1024
-#else
-# define CONFIG_SYS_CBSIZE 256
-#endif
-
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT)+16)
-
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 16 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux*/
-#define CONFIG_SYS_BOOTM_LEN (16 << 20) /* Increase max gunzip size */
-
-#ifdef CONFIG_CMD_KGDB
-# define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#endif
-
-/*
- * Basic Environment Configuration
- */
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_BOOTDELAY 5 /* -1 disables auto-boot */
-
-/*default location for tftp and bootm*/
-#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/tb0229.h b/include/configs/tb0229.h
deleted file mode 100644
index 2901ed1..0000000
--- a/include/configs/tb0229.h
+++ /dev/null
@@ -1,175 +0,0 @@
-/*
- * (C) Copyright 2003
- * Masami Komiya <mkomiya@sonare.it>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * Config header file for TANBAC TB0229 board using an VR4131 CPU module
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_MIPS32 1 /* MIPS 4Kc CPU core */
-#define CONFIG_TB0229 1 /* on a TB0229 Board */
-
-#ifndef CPU_CLOCK_RATE
-#define CPU_CLOCK_RATE 200000000 /* 200 MHz clock for the MIPS core */
-#endif
-#define CPU_TCLOCK_RATE 16588800 /* 16.5888 MHz for TClock */
-
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-
-#define CONFIG_BAUDRATE 115200
-
-#define CONFIG_TIMESTAMP /* Print image info with timestamp */
-
-#define CONFIG_PREBOOT "echo;" \
- "echo Type \\\"boot\\\" for the network boot using DHCP, TFTP and NFS;" \
- "echo Type \\\"run netboot_initrd\\\" for the network boot with initrd;" \
- "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
- "echo Type \\\"run flash_local\\\" to mount local root filesystem;" \
- "echo"
-
-#undef CONFIG_BOOTARGS
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "netboot=dhcp;tftp;run netargs; bootm\0" \
- "nfsargs=setenv bootargs root=/dev/nfs ip=dhcp\0" \
- "localargs=setenv bootargs root=1F02 ip=dhcp\0" \
- "addmisc=setenv bootargs ${bootargs} " \
- "console=ttyS0,${baudrate} " \
- "read-only=readonly\0" \
- "netargs=run nfsargs addmisc\0" \
- "flash_nfs=run nfsargs addmisc;" \
- "bootm ${kernel_addr}\0" \
- "flash_local=run localargs addmisc;" \
- "bootm ${kernel_addr}\0" \
- "netboot_initrd=dhcp;tftp;tftp 80600000 initrd;" \
- "setenv bootargs root=/dev/ram ramdisk_size=8192 ip=dhcp;"\
- "run addmisc;" \
- "bootm 80400000 80600000\0" \
- "rootpath=/export/miniroot-mipsel\0" \
- "autoload=no\0" \
- "kernel_addr=BFC60000\0" \
- "ramdisk_addr=B0100000\0" \
- "u-boot=u-boot.bin\0" \
- "bootfile=uImage\0" \
- "load=dhcp;tftp 80400000 ${u-boot}\0" \
- "load_kernel=dhcp;tftp 80400000 ${bootfile}\0" \
- "update_uboot=run load;" \
- "protect off BFC00000 BFC3FFFF;" \
- "erase BFC00000 BFC3FFFF;" \
- "cp.b 80400000 BFC00000 ${filesize}\0" \
- "update_kernel=run load_kernel;" \
- "erase BFC60000 BFD5FFFF;" \
- "cp.b 80400000 BFC60000 ${filesize}\0" \
- "initenv=erase bfc40000 bfc5ffff\0" \
- ""
-/*#define CONFIG_BOOTCOMMAND "run flash_local" */
-#define CONFIG_BOOTCOMMAND "run netboot"
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_ELF
-
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "# " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args*/
-
-#define CONFIG_SYS_MALLOC_LEN 128*1024
-
-#define CONFIG_SYS_BOOTPARAMS_LEN 128*1024
-
-#define CONFIG_SYS_MIPS_TIMER_FREQ (CPU_TCLOCK_RATE/4)
-
-#define CONFIG_SYS_SDRAM_BASE 0x80000000
-
-#define CONFIG_SYS_LOAD_ADDR 0x80400000 /* default load address */
-
-#define CONFIG_SYS_MEMTEST_START 0x80000000
-#define CONFIG_SYS_MEMTEST_END 0x80800000
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT (128) /* max number of sectors on one chip */
-
-#define PHYS_FLASH_1 0xbfc00000 /* Flash Bank #1 */
-
-/* The following #defines are needed to get flash environment right */
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_MONITOR_LEN (192 << 10)
-
-#define CONFIG_SYS_INIT_SP_OFFSET 0x400000
-
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT (20 * CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (2 * CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-
-/* Address and size of Primary Environment Sector */
-#define CONFIG_ENV_ADDR 0xBFC40000
-#define CONFIG_ENV_SIZE 0x20000
-
-#define CONFIG_SYS_DIRECT_FLASH_TFTP
-
-#define CONFIG_NR_DRAM_BANKS 1
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_DCACHE_SIZE 16384
-#define CONFIG_SYS_ICACHE_SIZE 16384
-#define CONFIG_SYS_CACHELINE_SIZE 16
-
-/*-----------------------------------------------------------------------
- * Serial Configuration
- */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE 1
-#define CONFIG_SYS_NS16550_CLK 18432000
-#define CONFIG_SYS_NS16550_COM1 0xaf000800
-
-/*-----------------------------------------------------------------------
- * PCI stuff
- */
-#define CONFIG_PCI
-#define CONFIG_PCI_PNP
-#define CONFIG_EEPRO100
-#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
-
-#define CONFIG_RTL8139
-
-#endif /* __CONFIG_H */
diff --git a/include/cramfs/cramfs_fs_sb.h b/include/cramfs/cramfs_fs_sb.h
deleted file mode 100644
index bc23f94..0000000
--- a/include/cramfs/cramfs_fs_sb.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef _CRAMFS_FS_SB
-#define _CRAMFS_FS_SB
-
-/*
- * cramfs super-block data in memory
- */
-struct cramfs_sb_info {
- unsigned long magic;
- unsigned long size;
- unsigned long blocks;
- unsigned long files;
- unsigned long flags;
-#ifdef CONFIG_CRAMFS_LINEAR
- unsigned long linear_phys_addr;
- char * linear_virt_addr;
-#endif
-};
-
-#endif
diff --git a/include/da9030.h b/include/da9030.h
deleted file mode 100644
index 275d681..0000000
--- a/include/da9030.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * (C) Copyright 2006 DENX Software Engineering
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/* DA9030 register definitions */
-#define CID 0x00
-#define EVENT_A 0x01
-#define EVENT_B 0x02
-#define EVENT_C 0x03
-#define STATUS 0x04
-#define IRQ_MASK_A 0x05
-#define IRQ_MASK_B 0x06
-#define IRQ_MASK_C 0x07
-#define SYS_CONTROL_A 0x08
-#define SYS_CONTROL_B 0x09
-#define FAULT_LOG 0x0A
-#define LDO_10_11 0x10
-#define LDO_15 0x11
-#define LDO_14_16 0x12
-#define LDO_18_19 0x13
-#define LDO_17_SIMCP0 0x14
-#define BUCK2_DVC1 0x15
-#define BUCK2_DVC2 0x16
-#define REG_CONTROL_1_17 0x17
-#define REG_CONTROL_2_18 0x18
-#define USBPUMP 0x19
-#define SLEEP_CONTROL 0x1A
-#define STARTUP_CONTROL 0x1B
-#define LED1_CONTROL 0x20
-#define LED2_CONTROL 0x21
-#define LED3_CONTROL 0x22
-#define LED4_CONTROL 0x23
-#define LEDPC_CONTROL 0x24
-#define WLED_CONTROL 0x25
-#define MISC_CONTROLA 0x26
-#define MISC_CONTROLB 0x27
-#define CHARGE_CONTROL 0x28
-#define CCTR_CONTROL 0x29
-#define TCTR_CONTROL 0x2A
-#define CHARGE_PULSE 0x2B
-
-/* ... some missing ...*/
-
-#define LDO1 0x90
-#define LDO2_3 0x91
-#define LDO4_5 0x92
-#define LDO6_SIMCP 0x93
-#define LDO7_8 0x94
-#define LDO9_12 0x95
-#define BUCK 0x96
-#define REG_CONTROL_1_97 0x97
-#define REG_CONTROL_2_98 0x98
-#define REG_SLEEP_CONTROL1 0x99
-#define REG_SLEEP_CONTROL2 0x9A
-#define REG_SLEEP_CONTROL3 0x9B
-#define ADC_MAN_CONTROL 0xA0
-#define ADC_AUTO_CONTROL 0xA1
-#define VBATMON 0xA2
-#define VBATMONTXMON 0xA3
-#define TBATHIGHP 0xA4
-#define TBATHIGHN 0xA5
-#define TBATLOW 0xA6
-#define MAN_RES 0xB0
-#define VBAT_RES 0xB1
-#define VBATMIN_RES 0xB2
-#define VBATMINTXON_RES 0xB3
-#define ICHMAX_RES 0xB4
-#define ICHMIN_RES 0xB5
-#define ICHAVERAGE_RES 0xB6
-#define VCHMAX_RES 0xB7
-#define VCHMIN_RES 0xB8
-#define TBAT_RES 0xB9
-#define ADC_IN4_RES 0xBA
-
-#define STATUS_ONKEY_N 0x1 /* current ONKEY_N value */
-#define STATUS_PWREN1 (1<<1) /* PWREN1 value */
-#define STATUS_EXTON (1<<2) /* EXTON value */
-#define STATUS_CHDET (1<<3) /* Charger detection status */
-#define STATUS_TBAT (1<<4) /* Battery over/under temperature status */
-#define STATUS_VBATMON (1<<5) /* VBATMON comparison status */
-#define STATUS_VBATMONTXON (1<<6) /* VBATMONTXON comparison status */
-#define STATUS_CHIOVER (1<<7) /* Charge overcurrent */
-
-#define SYS_CONTROL_A_SLEEP_N_PIN_ENABLE 0x1
-#define SYS_CONTROL_A_SHUT_DOWN (1<<1)
-#define SYS_CONTROL_A_HWRES_ENABLE (1<<2)
-#define SYS_CONTROL_A_WDOG_ACTION (1<<3)
-#define SYS_CONTROL_A_WATCHDOG (1<<7)
-
-#define MISC_CONTROLB_USB_INT_RISING (1<<2)
-#define MISC_CONTROLB_SESSION_VALID_EN (1<<3)
-
-#define USB_PUMP_USBVE (1<<0)
-#define USB_PUMP_USBVEP (1<<1)
-#define USB_PUMP_SRP_DETECT (1<<2)
-#define USB_PUMP_SESSION_VALID (1<<3)
-#define USB_PUMP_VBUS_VALID_4_0 (1<<4)
-#define USB_PUMP_VBUS_VALID_4_4 (1<<5)
-#define USB_PUMP_EN_USBVE (1<<6)
-#define USB_PUMP_EN_USBVEP (1<<7)
diff --git a/include/dm9161.h b/include/dm9161.h
deleted file mode 100644
index bd85e42..0000000
--- a/include/dm9161.h
+++ /dev/null
@@ -1,127 +0,0 @@
-/*
- * NOTE: DAVICOM ethernet Physical layer
- *
- * Version: @(#)DM9161.h 1.0.0 01/10/2001
- *
- * Authors: ATMEL Rousset
- *
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-
-/* DAVICOM PHYSICAL LAYER TRANSCEIVER DM9161 */
-
-#define DM9161_BMCR 0 /* Basic Mode Control Register */
-#define DM9161_BMSR 1 /* Basic Mode Status Register */
-#define DM9161_PHYID1 2 /* PHY Idendifier Register 1 */
-#define DM9161_PHYID2 3 /* PHY Idendifier Register 2 */
-#define DM9161_ANAR 4 /* Auto_Negotiation Advertisement Register */
-#define DM9161_ANLPAR 5 /* Auto_negotiation Link Partner Ability Register */
-#define DM9161_ANER 6 /* Auto-negotiation Expansion Register */
-#define DM9161_DSCR 16 /* Specified Configuration Register */
-#define DM9161_DSCSR 17 /* Specified Configuration and Status Register */
-#define DM9161_10BTCSR 18 /* 10BASE-T Configuration and Satus Register */
-#define DM9161_MDINTR 21 /* Specified Interrupt Register */
-#define DM9161_RECR 22 /* Specified Receive Error Counter Register */
-#define DM9161_DISCR 23 /* Specified Disconnect Counter Register */
-#define DM9161_RLSR 24 /* Hardware Reset Latch State Register */
-
-
-/* --Bit definitions: DM9161_BMCR */
-#define DM9161_RESET (1 << 15) /* 1= Software Reset; 0=Normal Operation */
-#define DM9161_LOOPBACK (1 << 14) /* 1=loopback Enabled; 0=Normal Operation */
-#define DM9161_SPEED_SELECT (1 << 13) /* 1=100Mbps; 0=10Mbps */
-#define DM9161_AUTONEG (1 << 12)
-#define DM9161_POWER_DOWN (1 << 11)
-#define DM9161_ISOLATE (1 << 10)
-#define DM9161_RESTART_AUTONEG (1 << 9)
-#define DM9161_DUPLEX_MODE (1 << 8)
-#define DM9161_COLLISION_TEST (1 << 7)
-
-/*--Bit definitions: DM9161_BMSR */
-#define DM9161_100BASE_TX (1 << 15)
-#define DM9161_100BASE_TX_FD (1 << 14)
-#define DM9161_100BASE_TX_HD (1 << 13)
-#define DM9161_10BASE_T_FD (1 << 12)
-#define DM9161_10BASE_T_HD (1 << 11)
-#define DM9161_MF_PREAMB_SUPPR (1 << 6)
-#define DM9161_AUTONEG_COMP (1 << 5)
-#define DM9161_REMOTE_FAULT (1 << 4)
-#define DM9161_AUTONEG_ABILITY (1 << 3)
-#define DM9161_LINK_STATUS (1 << 2)
-#define DM9161_JABBER_DETECT (1 << 1)
-#define DM9161_EXTEND_CAPAB (1 << 0)
-
-/*--definitions: DM9161_PHYID1 */
-#define DM9161_PHYID1_OUI 0x606E
-#define DM9161_LSB_MASK 0x3F
-
-/*--Bit definitions: DM9161_ANAR, DM9161_ANLPAR */
-#define DM9161_NP (1 << 15)
-#define DM9161_ACK (1 << 14)
-#define DM9161_RF (1 << 13)
-#define DM9161_FCS (1 << 10)
-#define DM9161_T4 (1 << 9)
-#define DM9161_TX_FDX (1 << 8)
-#define DM9161_TX_HDX (1 << 7)
-#define DM9161_10_FDX (1 << 6)
-#define DM9161_10_HDX (1 << 5)
-#define DM9161_AN_IEEE_802_3 0x0001
-
-/*--Bit definitions: DM9161_ANER */
-#define DM9161_PDF (1 << 4)
-#define DM9161_LP_NP_ABLE (1 << 3)
-#define DM9161_NP_ABLE (1 << 2)
-#define DM9161_PAGE_RX (1 << 1)
-#define DM9161_LP_AN_ABLE (1 << 0)
-
-/*--Bit definitions: DM9161_DSCR */
-#define DM9161_BP4B5B (1 << 15)
-#define DM9161_BP_SCR (1 << 14)
-#define DM9161_BP_ALIGN (1 << 13)
-#define DM9161_BP_ADPOK (1 << 12)
-#define DM9161_REPEATER (1 << 11)
-#define DM9161_TX (1 << 10)
-#define DM9161_RMII_ENABLE (1 << 8)
-#define DM9161_F_LINK_100 (1 << 7)
-#define DM9161_SPLED_CTL (1 << 6)
-#define DM9161_COLLED_CTL (1 << 5)
-#define DM9161_RPDCTR_EN (1 << 4)
-#define DM9161_SM_RST (1 << 3)
-#define DM9161_MFP SC (1 << 2)
-#define DM9161_SLEEP (1 << 1)
-#define DM9161_RLOUT (1 << 0)
-
-/*--Bit definitions: DM9161_DSCSR */
-#define DM9161_100FDX (1 << 15)
-#define DM9161_100HDX (1 << 14)
-#define DM9161_10FDX (1 << 13)
-#define DM9161_10HDX (1 << 12)
-
-/*--Bit definitions: DM9161_10BTCSR */
-#define DM9161_LP_EN (1 << 14)
-#define DM9161_HBE (1 << 13)
-#define DM9161_SQUELCH (1 << 12)
-#define DM9161_JABEN (1 << 11)
-#define DM9161_10BT_SER (1 << 10)
-#define DM9161_POLR (1 << 0)
-
-
-/*--Bit definitions: DM9161_MDINTR */
-#define DM9161_INTR_PEND (1 << 15)
-#define DM9161_FDX_MASK (1 << 11)
-#define DM9161_SPD_MASK (1 << 10)
-#define DM9161_LINK_MASK (1 << 9)
-#define DM9161_INTR_MASK (1 << 8)
-#define DM9161_FDX_CHANGE (1 << 4)
-#define DM9161_SPD_CHANGE (1 << 3)
-#define DM9161_LINK_CHANGE (1 << 2)
-#define DM9161_INTR_STATUS (1 << 0)
-
-
-/****************** function prototypes **********************/
-unsigned int dm9161_IsPhyConnected(AT91PS_EMAC p_mac);
-unsigned char dm9161_GetLinkSpeed(AT91PS_EMAC p_mac);
-unsigned char dm9161_AutoNegotiate(AT91PS_EMAC p_mac, int *status);
-unsigned char dm9161_InitPhy(AT91PS_EMAC p_mac);
diff --git a/include/faraday/ftsdc021.h b/include/faraday/ftsdc021.h
deleted file mode 100644
index de8e250..0000000
--- a/include/faraday/ftsdc021.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * (C) Copyright 2013 Faraday Technology
- * Dante Su <dantesu@faraday-tech.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __FTSDC021_H
-#define __FTSDC021_H
-
-int ftsdc021_sdhci_init(u32 regbase);
-
-#endif /* __FTSDC021_H */
diff --git a/include/ks8721.h b/include/ks8721.h
deleted file mode 100644
index 90ed178..0000000
--- a/include/ks8721.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * NOTE: MICREL ethernet Physical layer
- *
- * Version: KS8721.h
- *
- * Authors: Eric Benard (based on dm9161.h)
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/* MICREL PHYSICAL LAYER TRANSCEIVER KS8721 */
-
-#define KS8721_BMCR 0
-#define KS8721_BMSR 1
-#define KS8721_PHYID1 2
-#define KS8721_PHYID2 3
-#define KS8721_ANAR 4
-#define KS8721_ANLPAR 5
-#define KS8721_ANER 6
-#define KS8721_RECR 15
-#define KS8721_MDINTR 27
-#define KS8721_100BT 31
-
-/* --Bit definitions: KS8721_BMCR */
-#define KS8721_RESET (1 << 15)
-#define KS8721_LOOPBACK (1 << 14)
-#define KS8721_SPEED_SELECT (1 << 13)
-#define KS8721_AUTONEG (1 << 12)
-#define KS8721_POWER_DOWN (1 << 11)
-#define KS8721_ISOLATE (1 << 10)
-#define KS8721_RESTART_AUTONEG (1 << 9)
-#define KS8721_DUPLEX_MODE (1 << 8)
-#define KS8721_COLLISION_TEST (1 << 7)
-#define KS8721_DISABLE (1 << 0)
-
-/*--Bit definitions: KS8721_BMSR */
-#define KS8721_100BASE_T4 (1 << 15)
-#define KS8721_100BASE_TX_FD (1 << 14)
-#define KS8721_100BASE_T4_HD (1 << 13)
-#define KS8721_10BASE_T_FD (1 << 12)
-#define KS8721_10BASE_T_HD (1 << 11)
-#define KS8721_MF_PREAMB_SUPPR (1 << 6)
-#define KS8721_AUTONEG_COMP (1 << 5)
-#define KS8721_REMOTE_FAULT (1 << 4)
-#define KS8721_AUTONEG_ABILITY (1 << 3)
-#define KS8721_LINK_STATUS (1 << 2)
-#define KS8721_JABBER_DETECT (1 << 1)
-#define KS8721_EXTEND_CAPAB (1 << 0)
-
-/*--Bit definitions: KS8721_PHYID */
-#define KS8721_PHYID_OUI 0x0885
-#define KS8721_LSB_MASK 0x3F
-
-#define KS8721BL_MODEL 0x21
-#define KS8721_MODELMASK 0x3F0
-#define KS8721BL_REV 0x9
-#define KS8721_REVMASK 0xF
-
-/*--Bit definitions: KS8721_ANAR, KS8721_ANLPAR */
-#define KS8721_NP (1 << 15)
-#define KS8721_ACK (1 << 14)
-#define KS8721_RF (1 << 13)
-#define KS8721_PAUSE (1 << 10)
-#define KS8721_T4 (1 << 9)
-#define KS8721_TX_FDX (1 << 8)
-#define KS8721_TX_HDX (1 << 7)
-#define KS8721_10_FDX (1 << 6)
-#define KS8721_10_HDX (1 << 5)
-#define KS8721_AN_IEEE_802_3 0x0001
-
-/****************** function prototypes **********************/
-unsigned int ks8721_isphyconnected(AT91PS_EMAC p_mac);
-unsigned char ks8721_getlinkspeed(AT91PS_EMAC p_mac);
-unsigned char ks8721_autonegotiate(AT91PS_EMAC p_mac, int *status);
-unsigned char ks8721_initphy(AT91PS_EMAC p_mac);
diff --git a/include/linux/mtd/inftl-user.h b/include/linux/mtd/inftl-user.h
deleted file mode 100644
index 45220ed..0000000
--- a/include/linux/mtd/inftl-user.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * $Id: inftl-user.h,v 1.2 2005/11/07 11:14:56 gleixner Exp $
- *
- * Parts of INFTL headers shared with userspace
- *
- */
-
-#ifndef __MTD_INFTL_USER_H__
-#define __MTD_INFTL_USER_H__
-
-#define OSAK_VERSION 0x5120
-#define PERCENTUSED 98
-
-#define SECTORSIZE 512
-
-/* Block Control Information */
-
-struct inftl_bci {
- uint8_t ECCsig[6];
- uint8_t Status;
- uint8_t Status1;
-} __attribute__((packed));
-
-struct inftl_unithead1 {
- uint16_t virtualUnitNo;
- uint16_t prevUnitNo;
- uint8_t ANAC;
- uint8_t NACs;
- uint8_t parityPerField;
- uint8_t discarded;
-} __attribute__((packed));
-
-struct inftl_unithead2 {
- uint8_t parityPerField;
- uint8_t ANAC;
- uint16_t prevUnitNo;
- uint16_t virtualUnitNo;
- uint8_t NACs;
- uint8_t discarded;
-} __attribute__((packed));
-
-struct inftl_unittail {
- uint8_t Reserved[4];
- uint16_t EraseMark;
- uint16_t EraseMark1;
-} __attribute__((packed));
-
-union inftl_uci {
- struct inftl_unithead1 a;
- struct inftl_unithead2 b;
- struct inftl_unittail c;
-};
-
-struct inftl_oob {
- struct inftl_bci b;
- union inftl_uci u;
-};
-
-
-/* INFTL Media Header */
-
-struct INFTLPartition {
- __u32 virtualUnits;
- __u32 firstUnit;
- __u32 lastUnit;
- __u32 flags;
- __u32 spareUnits;
- __u32 Reserved0;
- __u32 Reserved1;
-} __attribute__((packed));
-
-struct INFTLMediaHeader {
- char bootRecordID[8];
- __u32 NoOfBootImageBlocks;
- __u32 NoOfBinaryPartitions;
- __u32 NoOfBDTLPartitions;
- __u32 BlockMultiplierBits;
- __u32 FormatFlags;
- __u32 OsakVersion;
- __u32 PercentUsed;
- struct INFTLPartition Partitions[4];
-} __attribute__((packed));
-
-/* Partition flag types */
-#define INFTL_BINARY 0x20000000
-#define INFTL_BDTL 0x40000000
-#define INFTL_LAST 0x80000000
-
-#endif /* __MTD_INFTL_USER_H__ */
diff --git a/include/linux/mtd/jffs2-user.h b/include/linux/mtd/jffs2-user.h
deleted file mode 100644
index d508ef0..0000000
--- a/include/linux/mtd/jffs2-user.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * $Id: jffs2-user.h,v 1.1 2004/05/05 11:57:54 dwmw2 Exp $
- *
- * JFFS2 definitions for use in user space only
- */
-
-#ifndef __JFFS2_USER_H__
-#define __JFFS2_USER_H__
-
-/* This file is blessed for inclusion by userspace */
-#include <linux/jffs2.h>
-#include <endian.h>
-#include <byteswap.h>
-
-#undef cpu_to_je16
-#undef cpu_to_je32
-#undef cpu_to_jemode
-#undef je16_to_cpu
-#undef je32_to_cpu
-#undef jemode_to_cpu
-
-extern int target_endian;
-
-#define t16(x) ({ uint16_t __b = (x); (target_endian==__BYTE_ORDER)?__b:bswap_16(__b); })
-#define t32(x) ({ uint32_t __b = (x); (target_endian==__BYTE_ORDER)?__b:bswap_32(__b); })
-
-#define cpu_to_je16(x) ((jint16_t){t16(x)})
-#define cpu_to_je32(x) ((jint32_t){t32(x)})
-#define cpu_to_jemode(x) ((jmode_t){t32(x)})
-
-#define je16_to_cpu(x) (t16((x).v16))
-#define je32_to_cpu(x) (t32((x).v32))
-#define jemode_to_cpu(x) (t32((x).m))
-
-#endif /* __JFFS2_USER_H__ */
diff --git a/include/smiLynxEM.h b/include/smiLynxEM.h
deleted file mode 100644
index c020115..0000000
--- a/include/smiLynxEM.h
+++ /dev/null
@@ -1,163 +0,0 @@
-/*
- * (C) Copyright 1997-2002 ELTEC Elektronik AG
- * Frank Gottschling <fgottschling@eltec.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * smiLynxEM.h
- * Silicon Motion graphic interface for sm810/sm710/sm712 accelerator
- *
- *
- * modification history
- * --------------------
- * 04-18-2002 Rewritten for U-Boot <fgottschling@eltec.de>.
- */
-
-#ifndef _SMI_LYNX_EM_H_
-#define _SMI_LYNX_EM_H_
-
-/*
- * SMI 710/712 have 4MB internal RAM; SMI 810 2MB internal + 2MB external
- */
-#define VIDEO_MEM_SIZE 0x400000
-
-/*
- * Supported video modes for SMI Lynx E/EM/EM+
- */
-#define VIDEO_MODES 7
-#define DUAL_800_600 0 /* SMI710:VGA1:75Hz (pitch=1600) */
- /* VGA2:60/120Hz (pitch=1600) */
- /* SMI810:VGA1:75Hz (pitch=1600) */
- /* VGA2:75Hz (pitch=1600) */
-#define DUAL_1024_768 1 /* VGA1:75Hz VGA2:73Hz (pitch=2048) */
-#define SINGLE_800_600 2 /* VGA1:75Hz (pitch=800) */
-#define SINGLE_1024_768 3 /* VGA1:75Hz (pitch=1024) */
-#define SINGLE_1280_1024 4 /* VGA1:75Hz (pitch=1280) */
-#define TV_MODE_CCIR 5 /* VGA1:50Hz (h=720;v=576;pitch=720) */
-#define TV_MODE_EIA 6 /* VGA1:60Hz (h=720;v=484;pitch=720) */
-
-
-/*
- * ISA mapped regs
- */
-#define SMI_INDX_C4 (pGD->isaBase + 0x03c4) /* index reg */
-#define SMI_DATA_C5 (pGD->isaBase + 0x03c5) /* data reg */
-#define SMI_INDX_D4 (pGD->isaBase + 0x03d4) /* index reg */
-#define SMI_DATA_D5 (pGD->isaBase + 0x03d5) /* data reg */
-#define SMI_INDX_CE (pGD->isaBase + 0x03ce) /* index reg */
-#define SMI_DATA_CF (pGD->isaBase + 0x03cf) /* data reg */
-#define SMI_LOCK_REG (pGD->isaBase + 0x03c3) /* unlock/lock ext crt reg */
-#define SMI_MISC_REG (pGD->isaBase + 0x03c2) /* misc reg */
-#define SMI_LUT_MASK (pGD->isaBase + 0x03c6) /* lut mask reg */
-#define SMI_LUT_START (pGD->isaBase + 0x03c8) /* lut start index */
-#define SMI_LUT_RGB (pGD->isaBase + 0x03c9) /* lut colors auto incr.*/
-
-
-/*
- * Video processor control
- */
-typedef struct {
- unsigned int control;
- unsigned int colorKey;
- unsigned int colorKeyMask;
- unsigned int start;
- unsigned short offset;
- unsigned short width;
- unsigned int fifoPrio;
- unsigned int fifoERL;
- unsigned int YUVtoRGB;
-} SmiVideoProc;
-
-/*
- * Video window control
- */
-typedef struct {
- unsigned short top;
- unsigned short left;
- unsigned short bottom;
- unsigned short right;
- unsigned int srcStart;
- unsigned short width;
- unsigned short offset;
- unsigned char hStretch;
- unsigned char vStretch;
-} SmiVideoWin;
-
-/*
- * Capture port control
- */
-typedef struct {
- unsigned int control;
- unsigned short topClip;
- unsigned short leftClip;
- unsigned short srcHeight;
- unsigned short srcWidth;
- unsigned int srcBufStart1;
- unsigned int srcBufStart2;
- unsigned short srcOffset;
- unsigned short fifoControl;
-} SmiCapturePort;
-
-
-/******************************************************************************/
-/* Export Graphic Driver Control */
-/******************************************************************************/
-
-typedef struct {
- unsigned int isaBase;
- unsigned int pciBase;
- unsigned int dprBase;
- unsigned int vprBase;
- unsigned int cprBase;
- unsigned int frameAdrs;
- unsigned int memSize;
- unsigned int mode;
- unsigned int gdfIndex;
- unsigned int gdfBytesPP;
- unsigned int fg;
- unsigned int bg;
- unsigned int plnSizeX;
- unsigned int plnSizeY;
- unsigned int winSizeX;
- unsigned int winSizeY;
- char modeIdent[80];
-} GraphicDevice;
-
-extern GraphicDevice smi;
-
-
-/******************************************************************************/
-/* Export Graphic Functions */
-/******************************************************************************/
-
-void *video_hw_init (void); /* returns GraphicDevice struct or NULL */
-
-void video_hw_bitblt (
- unsigned int bpp, /* bytes per pixel */
- unsigned int src_x, /* source pos x */
- unsigned int src_y, /* source pos y */
- unsigned int dst_x, /* dest pos x */
- unsigned int dst_y, /* dest pos y */
- unsigned int dim_x, /* frame width */
- unsigned int dim_y /* frame height */
- );
-
-void video_hw_rectfill (
- unsigned int bpp, /* bytes per pixel */
- unsigned int dst_x, /* dest pos x */
- unsigned int dst_y, /* dest pos y */
- unsigned int dim_x, /* frame width */
- unsigned int dim_y, /* frame height */
- unsigned int color /* fill color */
- );
-
-void video_set_lut (
- unsigned int index, /* color number */
- unsigned char r, /* red */
- unsigned char g, /* green */
- unsigned char b /* blue */
- );
-
-#endif /*_SMI_LYNX_EM_H_ */