summaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
Diffstat (limited to 'include')
-rw-r--r--include/common.h10
-rw-r--r--include/configs/at91sam9260ek.h5
-rw-r--r--include/configs/at91sam9261ek.h5
-rw-r--r--include/configs/at91sam9263ek.h10
-rw-r--r--include/configs/at91sam9m10g45ek.h20
-rw-r--r--include/configs/at91sam9rlek.h3
-rw-r--r--include/configs/cm_t35.h5
-rw-r--r--include/configs/enbw_cmc.h20
-rw-r--r--include/configs/harmony.h29
-rw-r--r--include/configs/imx31_phycore.h1
-rw-r--r--include/configs/km/km_arm.h63
-rw-r--r--include/configs/km_kirkwood.h141
-rw-r--r--include/configs/lacie_kw.h6
-rw-r--r--include/configs/lsxl.h182
-rw-r--r--include/configs/m28evk.h11
-rw-r--r--include/configs/medcom.h6
-rw-r--r--include/configs/mgcoge3un.h86
-rw-r--r--include/configs/mx28evk.h9
-rw-r--r--include/configs/mx35pdk.h1
-rw-r--r--include/configs/mx53ard.h2
-rw-r--r--include/configs/mx53evk.h1
-rw-r--r--include/configs/mx53loco.h2
-rw-r--r--include/configs/mx53smd.h1
-rw-r--r--include/configs/mx6qarm2.h1
-rw-r--r--include/configs/mx6qsabrelite.h1
-rw-r--r--include/configs/omap3_beagle.h4
-rw-r--r--include/configs/omap3_evm.h4
-rw-r--r--include/configs/omap4_common.h7
-rw-r--r--include/configs/omap5_evm.h4
-rw-r--r--include/configs/paz00.h34
-rw-r--r--include/configs/plutux.h6
-rw-r--r--include/configs/portl2.h85
-rw-r--r--include/configs/seaboard.h35
-rw-r--r--include/configs/spear-common.h94
-rw-r--r--include/configs/spear3xx_evb.h (renamed from include/configs/spear3xx.h)62
-rw-r--r--include/configs/spear6xx_evb.h (renamed from include/configs/spear6xx.h)20
-rw-r--r--include/configs/tegra2-common-post.h117
-rw-r--r--include/configs/tegra2-common.h10
-rw-r--r--include/configs/tk71.h130
-rw-r--r--include/configs/trimslice.h99
-rw-r--r--include/configs/ventana.h29
-rw-r--r--include/configs/vl_ma2sc.h463
-rw-r--r--include/configs/whistler.h94
-rw-r--r--include/configs/zipitz2.h1
-rw-r--r--include/linux/mtd/fsmc_nand.h101
-rw-r--r--include/linux/mtd/st_smi.h117
-rw-r--r--include/net.h17
-rw-r--r--include/netdev.h2
48 files changed, 1796 insertions, 360 deletions
diff --git a/include/common.h b/include/common.h
index 7cf15c5..d1dd65a 100644
--- a/include/common.h
+++ b/include/common.h
@@ -760,6 +760,16 @@ char * strmhz(char *buf, unsigned long hz);
/* lib/crc32.c */
#include <u-boot/crc.h>
+/* lib/rand.c */
+#if defined(CONFIG_RANDOM_MACADDR) || \
+ defined(CONFIG_BOOTP_RANDOM_DELAY) || \
+ defined(CONFIG_CMD_LINK_LOCAL)
+#define RAND_MAX -1U
+void srand(unsigned int seed);
+unsigned int rand(void);
+unsigned int rand_r(unsigned int *seedp);
+#endif
+
/* common/console.c */
int console_init_f(void); /* Before relocation; uses the serial stuff */
int console_init_r(void); /* After relocation; uses the console stuff */
diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h
index 07b1968..ef25fa5 100644
--- a/include/configs/at91sam9260ek.h
+++ b/include/configs/at91sam9260ek.h
@@ -187,7 +187,7 @@
#define CONFIG_ENV_OFFSET 0x4200
#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
#define CONFIG_ENV_SIZE 0x4200
-#define CONFIG_BOOTCOMMAND "cp.b 0xC0042000 0x22000000 0x210000; bootm"
+#define CONFIG_BOOTCOMMAND "cp.b 0xC0084000 0x22000000 0x210000; bootm"
#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
"root=/dev/mtdblock0 " \
"mtdparts=atmel_nand:-(root) " \
@@ -201,7 +201,7 @@
#define CONFIG_ENV_OFFSET 0x4200
#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 + CONFIG_ENV_OFFSET)
#define CONFIG_ENV_SIZE 0x4200
-#define CONFIG_BOOTCOMMAND "cp.b 0xD0042000 0x22000000 0x210000; bootm"
+#define CONFIG_BOOTCOMMAND "cp.b 0xD0084000 0x22000000 0x210000; bootm"
#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
"root=/dev/mtdblock0 " \
"mtdparts=atmel_nand:-(root) " \
@@ -230,6 +230,7 @@
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_LONGHELP 1
#define CONFIG_CMDLINE_EDITING 1
+#define CONFIG_AUTO_COMPLETE
/*
* Size of malloc() pool
diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h
index 6fd0b83..014437b 100644
--- a/include/configs/at91sam9261ek.h
+++ b/include/configs/at91sam9261ek.h
@@ -189,7 +189,7 @@
#define CONFIG_ENV_OFFSET 0x4200
#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
#define CONFIG_ENV_SIZE 0x4200
-#define CONFIG_BOOTCOMMAND "cp.b 0xC0042000 0x22000000 0x210000; bootm"
+#define CONFIG_BOOTCOMMAND "cp.b 0xC0084000 0x22000000 0x210000; bootm"
#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
"root=/dev/mtdblock0 " \
"mtdparts=atmel_nand:-(root) " \
@@ -203,7 +203,7 @@
#define CONFIG_ENV_OFFSET 0x4200
#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 + CONFIG_ENV_OFFSET)
#define CONFIG_ENV_SIZE 0x4200
-#define CONFIG_BOOTCOMMAND "cp.b 0xD0042000 0x22000000 0x210000; bootm"
+#define CONFIG_BOOTCOMMAND "cp.b 0xD0084000 0x22000000 0x210000; bootm"
#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
"root=/dev/mtdblock0 " \
"mtdparts=atmel_nand:-(root) " \
@@ -232,6 +232,7 @@
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_LONGHELP
#define CONFIG_CMDLINE_EDITING
+#define CONFIG_AUTO_COMPLETE
/*
* Size of malloc() pool
diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h
index 61a622a..4309f71 100644
--- a/include/configs/at91sam9263ek.h
+++ b/include/configs/at91sam9263ek.h
@@ -33,7 +33,11 @@
*/
#include <asm/hardware.h>
+#ifndef CONFIG_SYS_USE_BOOT_NORFLASH
#define CONFIG_SYS_TEXT_BASE 0x21F00000
+#else
+#define CONFIG_SYS_TEXT_BASE 0x0000000
+#endif
/* ARM asynchronous clock */
#define CONFIG_SYS_AT91_MAIN_CLOCK 16367660 /* 16.367 MHz crystal */
@@ -147,11 +151,11 @@
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_MONITOR_LEN (256 << 10)
#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x007FE000)
+#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x007E0000)
#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR - CONFIG_ENV_SIZE)
/* Address and size of Primary Environment Sector */
-#define CONFIG_ENV_SIZE 0x2000
+#define CONFIG_ENV_SIZE 0x10000
#define xstr(s) str(s)
#define str(s) #s
@@ -314,7 +318,7 @@
#define CONFIG_ENV_OFFSET 0x4200
#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
#define CONFIG_ENV_SIZE 0x4200
-#define CONFIG_BOOTCOMMAND "cp.b 0xC0042000 0x22000000 0x210000; bootm"
+#define CONFIG_BOOTCOMMAND "cp.b 0xC0084000 0x22000000 0x210000; bootm"
#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
"root=/dev/mtdblock0 " \
"mtdparts=atmel_nand:-(root) "\
diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h
index f8b3095..1d5fc8f 100644
--- a/include/configs/at91sam9m10g45ek.h
+++ b/include/configs/at91sam9m10g45ek.h
@@ -59,17 +59,6 @@
#define CONFIG_USART_BASE ATMEL_BASE_DBGU
#define CONFIG_USART_ID ATMEL_ID_SYS
-/*
- * This needs to be defined for the OHCI code to work but it is defined as
- * ATMEL_ID_UHPHS in the CPU specific header files.
- */
-#define ATMEL_ID_UHP ATMEL_ID_UHPHS
-
-/*
- * Specify the clock enable bit in the PMC_SCER register.
- */
-#define ATMEL_PMC_UHP AT91SAM926x_PMC_UHP
-
/* LCD */
#define CONFIG_LCD
#define LCD_BPP LCD_COLOR8
@@ -147,13 +136,10 @@
#define CONFIG_RESET_PHY_R
/* USB */
-#define CONFIG_USB_ATMEL
-#define CONFIG_USB_OHCI_NEW
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_ATMEL
+#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2
#define CONFIG_DOS_PARTITION
-#define CONFIG_SYS_USB_OHCI_CPU_INIT
-#define CONFIG_SYS_USB_OHCI_REGS_BASE ATMEL_BASE_HCI
-#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9g45"
-#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
#define CONFIG_USB_STORAGE
#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h
index 45f8baf..c5952e9 100644
--- a/include/configs/at91sam9rlek.h
+++ b/include/configs/at91sam9rlek.h
@@ -155,7 +155,7 @@
#define CONFIG_ENV_OFFSET 0x4200
#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
#define CONFIG_ENV_SIZE 0x4200
-#define CONFIG_BOOTCOMMAND "cp.b 0xC0042000 0x22000000 0x210000; bootm"
+#define CONFIG_BOOTCOMMAND "cp.b 0xC0084000 0x22000000 0x210000; bootm"
#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
"root=/dev/mtdblock0 " \
"mtdparts=atmel_nand:-(root) "\
@@ -182,6 +182,7 @@
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_LONGHELP 1
#define CONFIG_CMDLINE_EDITING 1
+#define CONFIG_AUTO_COMPLETE
/*
* Size of malloc() pool
diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h
index 782d28c..ee4bce5 100644
--- a/include/configs/cm_t35.h
+++ b/include/configs/cm_t35.h
@@ -77,7 +77,7 @@
/*
* Size of malloc() pool
*/
-#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */
+#define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB */
/* Sector */
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10))
@@ -174,7 +174,7 @@
#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */
/* to access nand at */
/* CS0 */
-#define GPMC_NAND_ECC_LP_x16_LAYOUT
+#define GPMC_NAND_ECC_LP_x8_LAYOUT
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */
/* devices */
@@ -315,7 +315,6 @@
#define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */
#define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */
-#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */
#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET
#define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET
diff --git a/include/configs/enbw_cmc.h b/include/configs/enbw_cmc.h
index c1a0f6a..3fc07e6 100644
--- a/include/configs/enbw_cmc.h
+++ b/include/configs/enbw_cmc.h
@@ -102,6 +102,14 @@
#define CONFIG_SYS_DTT_HYSTERESIS 3
/*
+ * SPI Configuration
+ */
+#define CONFIG_DAVINCI_SPI
+#define CONFIG_SYS_SPI_BASE DAVINCI_SPI1_BASE
+#define CONFIG_SYS_SPI_CLK clk_get(DAVINCI_SPI1_CLKID)
+#define CONFIG_CMD_SPI
+
+/*
* Flash & Environment
*/
#ifdef CONFIG_USE_NAND
@@ -225,9 +233,9 @@
"key_magic_2=2\0" \
"key_magic_3=3\0" \
"magic_keys=0123\0" \
- "hwconfig=switch:lan=on,pwl=off\0" \
+ "hwconfig=switch:lan=on,pwl=off,config=0x60100000\0" \
"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
- "addmisc=setenv bootargs ${bootargs} davinci_mmc.use_dma=0\0" \
+ "addmisc=setenv bootargs ${bootargs}\0" \
"mtdids=" MTDIDS_DEFAULT "\0" \
"mtdparts=" MTDPARTS_DEFAULT "\0" \
"logversion=2\0" \
@@ -336,6 +344,11 @@
#define CONFIG_CMD_FAT
#define CONFIG_CMD_MMC
+/* GPIO */
+#define CONFIG_ENBW_CMC_BOARD_TYPE 57
+#define CONFIG_ENBW_CMC_HW_ID_BIT0 39
+#define CONFIG_ENBW_CMC_HW_ID_BIT1 38
+#define CONFIG_ENBW_CMC_HW_ID_BIT2 35
/* FDT support */
#define CONFIG_OF_LIBFDT
@@ -438,7 +451,8 @@
#define CONFIG_SYS_DV_NOR_BOOT_CFG (0x11)
#define CONFIG_POST (CONFIG_SYS_POST_MEMORY)
-#define CONFIG_SYS_POST_WORD_ADDR 0x8001FFF0
+#define CONFIG_POST_EXTERNAL_WORD_FUNCS
+#define CONFIG_SYS_POST_WORD_ADDR DAVINCI_RTC_BASE
#define CONFIG_LOGBUFFER
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
diff --git a/include/configs/harmony.h b/include/configs/harmony.h
index ce0ae9f..df5265a 100644
--- a/include/configs/harmony.h
+++ b/include/configs/harmony.h
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2010,2011
+ * (C) Copyright 2010-2012
* NVIDIA Corporation <www.nvidia.com>
*
* See file CREDITS for list of people who contributed to this
@@ -27,8 +27,12 @@
#include <asm/sizes.h>
#include "tegra2-common.h"
+/* Enable fdt support for Harmony. Flash the image in u-boot-dtb.bin */
+#define CONFIG_DEFAULT_DEVICE_TREE tegra2-harmony
+#define CONFIG_OF_CONTROL
+#define CONFIG_OF_SEPARATE
+
/* High-level configuration options */
-#define TEGRA2_SYSMEM "mem=384M@0M nvmem=128M@384M mem=512M@512M"
#define V_PROMPT "Tegra2 (Harmony) # "
#define CONFIG_TEGRA2_BOARD_STRING "NVIDIA Harmony"
@@ -44,14 +48,13 @@
#endif
#define CONFIG_MACH_TYPE MACH_TYPE_HARMONY
-#define CONFIG_SYS_BOARD_ODMDATA 0x300d8011 /* lp1, 1GB */
#define CONFIG_BOARD_EARLY_INIT_F
/* SD/MMC */
#define CONFIG_MMC
#define CONFIG_GENERIC_MMC
-#define CONFIG_TEGRA2_MMC
+#define CONFIG_TEGRA_MMC
#define CONFIG_CMD_MMC
#define CONFIG_DOS_PARTITION
@@ -61,4 +64,22 @@
/* Environment not stored */
#define CONFIG_ENV_IS_NOWHERE
+
+/* USB Host support */
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_TEGRA
+#define CONFIG_USB_STORAGE
+#define CONFIG_CMD_USB
+
+/* USB networking support */
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_SMSC95XX
+#define CONFIG_USB_ETHER_ASIX
+
+/* General networking support */
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_DHCP
+
+#include "tegra2-common-post.h"
+
#endif /* __CONFIG_H */
diff --git a/include/configs/imx31_phycore.h b/include/configs/imx31_phycore.h
index 1728358..acbd670 100644
--- a/include/configs/imx31_phycore.h
+++ b/include/configs/imx31_phycore.h
@@ -56,7 +56,6 @@
#define CONFIG_I2C_MXC
#define CONFIG_SYS_I2C_MX31_PORT2
#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SLAVE 0xfe
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE UART1_BASE
diff --git a/include/configs/km/km_arm.h b/include/configs/km/km_arm.h
index 011f838..3aa5ca1 100644
--- a/include/configs/km/km_arm.h
+++ b/include/configs/km/km_arm.h
@@ -57,6 +57,13 @@
#define CONFIG_CMD_SF
#define CONFIG_SOFT_I2C /* I2C bit-banged */
+#if defined CONFIG_KM_ENV_IS_IN_SPI_NOR
+#define CONFIG_ENV_SPI_BUS 0
+#define CONFIG_ENV_SPI_CS 0
+#define CONFIG_ENV_SPI_MAX_HZ 5000000
+#define CONFIG_ENV_SPI_MODE SPI_MODE_3
+#endif
+
#include "asm/arch/config.h"
#define CONFIG_SYS_TEXT_BASE 0x07d00000 /* code address before reloc */
@@ -81,7 +88,7 @@
"boot=bootm ${load_addr_r} - -\0" \
"cramfsloadfdt=true\0" \
"u-boot="xstr(CONFIG_HOSTNAME) "/u-boot.kwb\0" \
- CONFIG_KM_DEF_ENV_UPDATE \
+ CONFIG_KM_UPDATE_UBOOT \
""
#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
@@ -159,12 +166,12 @@
*/
#define CONFIG_NETCONSOLE /* include NetConsole support */
#define CONFIG_MII /* expose smi ove miiphy interface */
+#define CONFIG_CMD_MII /* to debug mdio phy config */
#define CONFIG_MVGBE /* Enable Marvell Gbe Controller Driver */
#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* detect link using phy */
#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
#define CONFIG_PHY_BASE_ADR 0
#define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */
-#define CONFIG_RESET_PHY_R /* use reset_phy() to init 88E1118 PHY */
/*
* UBI related stuff
@@ -185,6 +192,7 @@ int get_sda(void);
int get_scl(void);
#define KM_KIRKWOOD_SDA_PIN 8
#define KM_KIRKWOOD_SCL_PIN 9
+#define KM_KIRKWOOD_SOFT_I2C_GPIOS 0x0300
#define KM_KIRKWOOD_ENV_WP 38
#define I2C_ACTIVE __set_direction(KM_KIRKWOOD_SDA_PIN, 0)
@@ -211,6 +219,15 @@ int get_scl(void);
/*
* Environment variables configurations
*/
+#if defined CONFIG_KM_ENV_IS_IN_SPI_NOR
+#define CONFIG_ENV_IS_IN_SPI_FLASH /* use SPI-Flash for environment vars */
+#define CONFIG_ENV_OFFSET 0xc0000 /* no bracets! */
+#define CONFIG_ENV_SIZE 0x02000 /* Size of Environment */
+#define CONFIG_ENV_SECT_SIZE 0x10000
+#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \
+ CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_TOTAL_SIZE 0x20000 /* no bracets! */
+#else
#define CONFIG_ENV_IS_IN_EEPROM /* use EEPROM for environment vars */
#define CONFIG_SYS_DEF_EEPROM_ADDR 0x50
#define CONFIG_ENV_EEPROM_IS_ON_I2C
@@ -218,16 +235,20 @@ int get_scl(void);
#define CONFIG_ENV_OFFSET 0x0 /* no bracets! */
#define CONFIG_ENV_SIZE (0x2000 - CONFIG_ENV_OFFSET)
#define CONFIG_I2C_ENV_EEPROM_BUS KM_ENV_BUS "\0"
-
-/* offset redund: (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) */
-#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
#define CONFIG_ENV_OFFSET_REDUND 0x2000 /* no bracets! */
#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
+#endif
+
+#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
#define CONFIG_SPI_FLASH
#define CONFIG_SPI_FLASH_STMICRO
+/* SPI bus claim MPP configuration */
+#define CONFIG_SYS_KW_SPI_MPP 0x0
+
#define FLASH_GPIO_PIN 0x00010000
+#define KM_FLASH_GPIO_PIN 16
#ifndef MTDIDS_DEFAULT
# define MTDIDS_DEFAULT "nand0=orion_nand"
@@ -239,23 +260,32 @@ int get_scl(void);
"-(" CONFIG_KM_UBI_PARTITION_NAME_BOOT ");"
#endif /* MTDPARTS_DEFAULT */
-#define CONFIG_KM_DEF_ENV_UPDATE \
+#define CONFIG_KM_UPDATE_UBOOT \
"update=" \
- "spi on;sf probe 0;sf erase 0 50000;" \
- "sf write ${load_addr_r} 0 ${filesize};" \
- "spi off\0"
+ "sf probe 0;sf erase 0 +${filesize};" \
+ "sf write ${load_addr_r} 0 ${filesize};\0"
+
+#if defined CONFIG_KM_ENV_IS_IN_SPI_NOR
+#define CONFIG_KM_NEW_ENV \
+ "newenv=sf probe 0;" \
+ "sf erase " xstr(CONFIG_ENV_OFFSET) " " \
+ xstr(CONFIG_ENV_TOTAL_SIZE)"\0"
+#else
+#define CONFIG_KM_NEW_ENV \
+ "newenv=setenv addr 0x100000 && " \
+ "i2c dev 1; mw.b ${addr} 0 4 && " \
+ "eeprom write " xstr(CONFIG_SYS_DEF_EEPROM_ADDR) \
+ " ${addr} " xstr(CONFIG_ENV_OFFSET) " 4 && " \
+ "eeprom write " xstr(CONFIG_SYS_DEF_EEPROM_ADDR) \
+ " ${addr} " xstr(CONFIG_ENV_OFFSET_REDUND) " 4\0"
+#endif
/*
* Default environment variables
*/
#define CONFIG_EXTRA_ENV_SETTINGS \
CONFIG_KM_DEF_ENV \
- "newenv=setenv addr 0x100000 && " \
- "i2c dev 1; mw.b ${addr} 0 4 && " \
- "eeprom write " xstr(CONFIG_SYS_DEF_EEPROM_ADDR) \
- " ${addr} " xstr(CONFIG_ENV_OFFSET) " 4 && " \
- "eeprom write " xstr(CONFIG_SYS_DEF_EEPROM_ADDR) \
- " ${addr} " xstr(CONFIG_ENV_OFFSET_REDUND) " 4\0" \
+ CONFIG_KM_NEW_ENV \
"arch=arm\0" \
"EEprom_ivm=" KM_IVM_BUS "\0" \
""
@@ -284,4 +314,7 @@ int get_scl(void);
#define CONFIG_POST_EXTERNAL_WORD_FUNCS
#define CONFIG_CMD_DIAG
+/* we do the whole PCIe FPGA config stuff here */
+#define BOARD_LATE_INIT
+
#endif /* _CONFIG_KM_ARM_H */
diff --git a/include/configs/km_kirkwood.h b/include/configs/km_kirkwood.h
index ed36124..fba181f 100644
--- a/include/configs/km_kirkwood.h
+++ b/include/configs/km_kirkwood.h
@@ -6,8 +6,9 @@
* (C) Copyright 2009
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
- * (C) Copyright 2011
- * Holger Brunck, Keymile GmbH Hannover, holger.brunck@keymile.de
+ * (C) Copyright 2011-2012
+ * Holger Brunck, Keymile GmbH Hannover, holger.brunck@keymile.com
+ * Valentin Longchamp, Keymile AG, valentin.longchamp@keymile.com
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -36,25 +37,139 @@
#ifndef _CONFIG_KM_KIRKWOOD_H
#define _CONFIG_KM_KIRKWOOD_H
+/* KM_KIRKWOOD */
+#if defined(CONFIG_KM_KIRKWOOD)
+#define CONFIG_IDENT_STRING "\nKeymile Kirkwood"
+#define CONFIG_HOSTNAME km_kirkwood
+#define CONFIG_KM_DISABLE_PCIE
+#define KM_IVM_BUS "pca9544a:70:9" /* I2C2 (Mux-Port 1)*/
+
+/* KM_KIRKWOOD_PCI */
+#elif defined(CONFIG_KM_KIRKWOOD_PCI)
+#define CONFIG_IDENT_STRING "\nKeymile Kirkwood PCI"
+#define CONFIG_HOSTNAME km_kirkwood_pci
+#define KM_IVM_BUS "pca9544a:70:9" /* I2C2 (Mux-Port 1)*/
+#define CONFIG_KM_FPGA_CONFIG
+
+/* KM_NUSA */
+#elif defined(CONFIG_KM_NUSA)
+#define KM_IVM_BUS "pca9547:70:9" /* I2C2 (Mux-Port 1)*/
+#define CONFIG_IDENT_STRING "\nKeymile NUSA"
+#define CONFIG_HOSTNAME kmnusa
+#undef CONFIG_SYS_KWD_CONFIG
+#define CONFIG_SYS_KWD_CONFIG \
+ $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg
+#define CONFIG_KM_ENV_IS_IN_SPI_NOR
+#define CONFIG_KM_FPGA_CONFIG
+#define CONFIG_KM_PIGGY4_88E6352
+
+/* KM_MGCOGE3UN */
+#elif defined(CONFIG_KM_MGCOGE3UN)
+#define CONFIG_IDENT_STRING "\nKeymile COGE3UN"
+#define CONFIG_HOSTNAME mgcoge3un
+#define KM_IVM_BUS "pca9547:70:9" /* I2C2 (Mux-Port 1)*/
+#undef CONFIG_SYS_KWD_CONFIG
+#define CONFIG_SYS_KWD_CONFIG \
+ $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage-memphis.cfg
+#define CONFIG_KM_BOARD_EXTRA_ENV "waitforne=true\0"
+#define CONFIG_PIGGY_MAC_ADRESS_OFFSET 3
+#define CONFIG_KM_DISABLE_PCIE
+#define CONFIG_KM_PIGGY4_88E6061
+
+/* KMCOGE5UN */
+#elif defined(CONFIG_KM_COGE5UN)
+#define CONFIG_IDENT_STRING "\nKeymile COGE5UN"
+#define KM_IVM_BUS "pca9547:70:9" /* I2C2 (Mux-Port 1)*/
+#undef CONFIG_SYS_KWD_CONFIG
+#define CONFIG_SYS_KWD_CONFIG \
+ $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage_256M8_1.cfg
+#define CONFIG_KM_ENV_IS_IN_SPI_NOR
+#define CONFIG_PIGGY_MAC_ADRESS_OFFSET 3
+#define CONFIG_HOSTNAME kmcoge5un
+#define CONFIG_KM_DISABLE_PCIE
+#define CONFIG_KM_PIGGY4_88E6352
+
+/* KM_PORTL2 */
+#elif defined(CONFIG_KM_PORTL2)
+#define CONFIG_IDENT_STRING "\nKeymile Port-L2"
+#define CONFIG_HOSTNAME portl2
+#define KM_IVM_BUS "pca9544a:70:9" /* I2C2 (Mux-Port 1)*/
+#define CONFIG_KM_PIGGY4_88E6061
+
+#else
+#error ("Board unsupported")
+#endif
+
/* include common defines/options for all arm based Keymile boards */
#include "km/km_arm.h"
+#ifndef CONFIG_KM_ENV_IS_IN_SPI_NOR
+#define KM_ENV_BUS "pca9544a:70:d" /* I2C2 (Mux-Port 5)*/
+#endif
+
+#if defined(CONFIG_KM_PIGGY4_88E6352)
/*
- * Version number information
+ * Some keymile boards like mgcoge5un & nusa1 have their PIGGY4 connected via
+ * an Marvell 88E6352 simple switch.
+ * In this case we have to change the default settings for the etherent mac.
+ * There is NO ethernet phy. The ARM and Switch are conencted directly over
+ * RGMII in MAC-MAC mode
+ * In this case 1GBit full duplex and autoneg off
*/
-#ifdef CONFIG_KM_DISABLE_PCI
-#define CONFIG_IDENT_STRING "\nKeymile Kirkwood"
-#undef CONFIG_KIRKWOOD_PCIE_INIT
-#else
-#define CONFIG_IDENT_STRING "\nKeymile Kirkwood PCI"
+#define PORT_SERIAL_CONTROL_VALUE ( \
+ MVGBE_FORCE_LINK_PASS | \
+ MVGBE_DIS_AUTO_NEG_FOR_DUPLX | \
+ MVGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL | \
+ MVGBE_ADV_NO_FLOW_CTRL | \
+ MVGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX | \
+ MVGBE_FORCE_BP_MODE_NO_JAM | \
+ (1 << 9) /* Reserved bit has to be 1 */ | \
+ MVGBE_DO_NOT_FORCE_LINK_FAIL | \
+ MVGBE_DIS_AUTO_NEG_SPEED_GMII | \
+ MVGBE_DTE_ADV_0 | \
+ MVGBE_MIIPHY_MAC_MODE | \
+ MVGBE_AUTO_NEG_NO_CHANGE | \
+ MVGBE_MAX_RX_PACKET_1552BYTE | \
+ MVGBE_CLR_EXT_LOOPBACK | \
+ MVGBE_SET_FULL_DUPLEX_MODE | \
+ MVGBE_EN_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX |\
+ MVGBE_SET_GMII_SPEED_TO_1000 |\
+ MVGBE_SET_MII_SPEED_TO_100)
+
#endif
-#define CONFIG_HOSTNAME km_kirkwood
+#ifdef CONFIG_KM_PIGGY4_88E6061
+/*
+ * Some keymile boards like mgcoge3un have their PIGGY4 connected via
+ * an Marvell 88E6061 simple switch.
+ * In this case we have to change the default settings for the
+ * ethernet phy connected to the kirkwood.
+ * In this case 100MB full duplex and autoneg off
+ */
+#define PORT_SERIAL_CONTROL_VALUE ( \
+ MVGBE_FORCE_LINK_PASS | \
+ MVGBE_DIS_AUTO_NEG_FOR_DUPLX | \
+ MVGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL | \
+ MVGBE_ADV_NO_FLOW_CTRL | \
+ MVGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX | \
+ MVGBE_FORCE_BP_MODE_NO_JAM | \
+ (1 << 9) /* Reserved bit has to be 1 */ | \
+ MVGBE_DO_NOT_FORCE_LINK_FAIL | \
+ MVGBE_DIS_AUTO_NEG_SPEED_GMII | \
+ MVGBE_DTE_ADV_0 | \
+ MVGBE_MIIPHY_MAC_MODE | \
+ MVGBE_AUTO_NEG_NO_CHANGE | \
+ MVGBE_MAX_RX_PACKET_1552BYTE | \
+ MVGBE_CLR_EXT_LOOPBACK | \
+ MVGBE_SET_FULL_DUPLEX_MODE | \
+ MVGBE_DIS_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX |\
+ MVGBE_SET_GMII_SPEED_TO_10_100 |\
+ MVGBE_SET_MII_SPEED_TO_100)
+#endif
-#define KM_IVM_BUS "pca9544a:70:9" /* I2C2 (Mux-Port 1)*/
-#define KM_ENV_BUS "pca9544a:70:d" /* I2C2 (Mux-Port 5)*/
+#ifdef CONFIG_KM_DISABLE_PCI
+#undef CONFIG_KIRKWOOD_PCIE_INIT
+#endif
-/* GPIO Pin from kirkwood connected to PROGRAM_B pin of the xilinx FPGA */
-#define KM_XLX_PROGRAM_B_PIN 39
#endif /* _CONFIG_KM_KIRKWOOD */
diff --git a/include/configs/lacie_kw.h b/include/configs/lacie_kw.h
index cd8d59f..c35c2db 100644
--- a/include/configs/lacie_kw.h
+++ b/include/configs/lacie_kw.h
@@ -66,15 +66,11 @@
/*
* SDRAM configuration
*/
-#if defined(CONFIG_NET2BIG_V2)
-#define CONFIG_NR_DRAM_BANKS 2
-#else
#define CONFIG_NR_DRAM_BANKS 1
-#endif
#ifdef CONFIG_INETSPACE_V2
/* Different SDRAM configuration and size for Internet Space v2 */
-#define CONFIG_SYS_KWD_CONFIG ($(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage-is2.cfg)
+#define CONFIG_SYS_KWD_CONFIG $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage-is2.cfg
#endif
/*
diff --git a/include/configs/lsxl.h b/include/configs/lsxl.h
new file mode 100644
index 0000000..0db559c
--- /dev/null
+++ b/include/configs/lsxl.h
@@ -0,0 +1,182 @@
+/*
+ * Copyright (c) 2012 Michael Walle
+ * Michael Walle <michael@walle.cc>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#ifndef _CONFIG_LSXL_H
+#define _CONFIG_LSXL_H
+
+/*
+ * Version number information
+ */
+#if defined(CONFIG_LSCHLV2)
+#define CONFIG_IDENT_STRING " LS-CHLv2"
+#define CONFIG_SYS_KWD_CONFIG $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage-lschl.cfg
+#define CONFIG_MACH_TYPE 3006
+#define CONFIG_SYS_TCLK 166666667 /* 166 MHz */
+#elif defined(CONFIG_LSXHL)
+#define CONFIG_IDENT_STRING " LS-XHL"
+#define CONFIG_SYS_KWD_CONFIG $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage-lsxhl.cfg
+#define CONFIG_MACH_TYPE 2663
+/* CONFIG_SYS_TCLK is 200000000 by default */
+#else
+#error "unknown board"
+#endif
+
+/*
+ * General configuration options
+ */
+#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
+#define CONFIG_KIRKWOOD /* SOC Family Name */
+#define CONFIG_KW88F6281 /* SOC Name */
+
+#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
+#define CONFIG_MISC_INIT_R
+#define CONFIG_SHOW_BOOT_PROGRESS
+
+#define CONFIG_RANDOM_MACADDR
+#define CONFIG_KIRKWOOD_GPIO
+#define CONFIG_OF_LIBFDT
+
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_SYS_CONSOLE_INFO_QUIET
+
+/*
+ * Enable u-boot API for standalone programs.
+ */
+#define CONFIG_API
+
+/*
+ * Commands configuration
+ */
+#include <config_cmd_default.h>
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SF
+#define CONFIG_CMD_SPI
+#define CONFIG_CMD_USB
+
+#define CONFIG_DOS_PARTITION
+#define CONFIG_EFI_PARTITION
+
+/*
+ * mv-common.h should be defined after CMD configs since it used them
+ * to enable certain macros
+ */
+#include "mv-common.h"
+
+/* ST M25P40 */
+#undef CONFIG_SPI_FLASH_MACRONIX
+#define CONFIG_SPI_FLASH_STMICRO
+#undef CONFIG_ENV_SPI_MAX_HZ
+#define CONFIG_ENV_SPI_MAX_HZ 25000000
+#undef CONFIG_SF_DEFAULT_SPEED
+#define CONFIG_SF_DEFAULT_SPEED 25000000
+
+
+#undef CONFIG_SYS_PROMPT
+#define CONFIG_SYS_PROMPT "=> "
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+
+/*
+ * Environment variables configurations
+ */
+#ifdef CONFIG_SPI_FLASH
+#define CONFIG_SYS_MAX_FLASH_BANKS 1
+#define CONFIG_SYS_MAX_FLASH_SECT 8
+#define CONFIG_ENV_IS_IN_SPI_FLASH 1
+#define CONFIG_ENV_SECT_SIZE 0x10000 /* 64K */
+#else
+#define CONFIG_ENV_IS_NOWHERE
+#endif
+
+#define CONFIG_ENV_SIZE 0x10000 /* 64k */
+#define CONFIG_ENV_OFFSET 0x70000 /* env starts here */
+
+/*
+ * Default environment variables
+ */
+#define CONFIG_LOADADDR 0x00800000
+#define CONFIG_BOOTCOMMAND "run bootcmd_${bootsource}"
+#define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/sda2"
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "bootsource=hdd\0" \
+ "hdpart=0:1\0" \
+ "bootcmd_net=bootp 0x00100000 uImage " \
+ "&& tftpboot 0x00800000 uInitrd " \
+ "&& bootm 0x00100000 0x00800000\0" \
+ "bootcmd_hdd=ide reset " \
+ "&& ext2load ide ${hdpart} 0x00100000 /uImage " \
+ "&& ext2load ide ${hdpart} 0x00800000 /uInitrd " \
+ "&& bootm 0x00100000 0x00800000\0" \
+ "bootcmd_usb=usb start " \
+ "&& fatload usb 0:1 0x00100000 /uImage " \
+ "&& fatload usb 0:1 0x00800000 /uInitrd " \
+ "&& bootm 0x00100000 0x00800000\0" \
+ "bootcmd_rescue=run config_nc_dhcp; run nc\0" \
+ "eraseenv=sf probe 0 " \
+ "&& sf erase " MK_STR(CONFIG_ENV_OFFSET) \
+ " +" MK_STR(CONFIG_ENV_SIZE) "\0" \
+ "config_nc_dhcp=setenv autoload_old ${autoload}; " \
+ "setenv autoload no " \
+ "&& bootp " \
+ "&& setenv ncip ${serverip} " \
+ "&& setenv autoload ${autoload_old}; " \
+ "setenv autoload_old\0" \
+ "standard_env=setenv ipaddr; setenv netmask; setenv serverip; " \
+ "setenv ncip; setenv gatewayip; setenv ethact; " \
+ "setenv bootfile; setenv dnsip; " \
+ "setenv bootsource hdd; run ser\0" \
+ "restore_env=run standard_env; saveenv; reset\0" \
+ "ser=setenv stdin serial; setenv stdout serial; " \
+ "setenv stderr serial\0" \
+ "nc=setenv stdin nc; setenv stdout nc; setenv stderr nc\0" \
+ "stdin=serial\0" \
+ "stdout=serial\0" \
+ "stderr=serial\0"
+
+/*
+ * Ethernet Driver configuration
+ */
+#ifdef CONFIG_CMD_NET
+#define CONFIG_MVGBE_PORTS {0, 1} /* enable port 1 only */
+#define CONFIG_PHY_BASE_ADR 7
+#undef CONFIG_RESET_PHY_R
+#endif /* CONFIG_CMD_NET */
+
+#ifdef CONFIG_CMD_IDE
+#undef CONFIG_IDE_LED
+#undef CONFIG_SYS_IDE_MAXBUS
+#define CONFIG_SYS_IDE_MAXBUS 1
+#undef CONFIG_SYS_IDE_MAXDEVICE
+#define CONFIG_SYS_IDE_MAXDEVICE 1
+#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
+#endif
+
+#endif /* _CONFIG_LSXL_H */
diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h
index 3abaadc..f12d927 100644
--- a/include/configs/m28evk.h
+++ b/include/configs/m28evk.h
@@ -17,8 +17,8 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
-#ifndef __M28_H__
-#define __M28_H__
+#ifndef __M28EVK_CONFIG_H__
+#define __M28EVK_CONFIG_H__
#include <asm/arch/regs-base.h>
@@ -40,11 +40,8 @@
#define CONFIG_SYS_ICACHE_OFF
#define CONFIG_SYS_DCACHE_OFF
#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_ARCH_CPU_INIT
#define CONFIG_ARCH_MISC_INIT
-#define CONFIG_OF_LIBFDT
-
/*
* SPL
*/
@@ -88,7 +85,7 @@
#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */
#define PHYS_SDRAM_1 0x40000000 /* Base address */
#define PHYS_SDRAM_1_SIZE 0x20000000 /* Max 512 MB RAM */
-#define CONFIG_STACKSIZE 0x00010000 /* 128 KB stack */
+#define CONFIG_STACKSIZE (128 * 1024) /* 128 KB stack */
#define CONFIG_SYS_MALLOC_LEN 0x00400000 /* 4 MB for malloc */
#define CONFIG_SYS_GBL_DATA_SIZE 128 /* Initial data */
#define CONFIG_SYS_MEMTEST_START 0x40000000 /* Memtest start adr */
@@ -325,4 +322,4 @@
"fi ; " \
"fi\0"
-#endif /* __M28_H__ */
+#endif /* __M28EVK_CONFIG_H__ */
diff --git a/include/configs/medcom.h b/include/configs/medcom.h
index 2dc3507..bdea7c9 100644
--- a/include/configs/medcom.h
+++ b/include/configs/medcom.h
@@ -29,10 +29,8 @@
#include "tegra2-common.h"
/* High-level configuration options */
-#define TEGRA2_SYSMEM "mem=384M@0M nvmem=128M@384M"
#define V_PROMPT "Tegra2 (Medcom) # "
#define CONFIG_TEGRA2_BOARD_STRING "Avionic Design Medcom"
-#define CONFIG_SYS_BOARD_ODMDATA 0x2b0d8011
/* Board-specific serial config */
#define CONFIG_SERIAL_MULTI
@@ -46,7 +44,7 @@
/* SD/MMC */
#define CONFIG_MMC
#define CONFIG_GENERIC_MMC
-#define CONFIG_TEGRA2_MMC
+#define CONFIG_TEGRA_MMC
#define CONFIG_CMD_MMC
#define CONFIG_DOS_PARTITION
@@ -61,4 +59,6 @@
"ext2load mmc 0 0x17000000 /boot/uImage;" \
"bootm"
+#include "tegra2-common-post.h"
+
#endif /* __CONFIG_H */
diff --git a/include/configs/mgcoge3un.h b/include/configs/mgcoge3un.h
deleted file mode 100644
index 797b0df..0000000
--- a/include/configs/mgcoge3un.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * (C) Copyright 2009
- * Marvell Semiconductor <www.marvell.com>
- * Prafulla Wadaskar <prafulla@marvell.com>
- *
- * (C) Copyright 2009
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * (C) Copyright 2010-2011
- * Holger Brunck, Keymile GmbH Hannover, holger.brunck@keymile.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301 USA
- */
-
-/* for linking errors see
- * http://lists.denx.de/pipermail/u-boot/2009-July/057350.html */
-
-#ifndef _CONFIG_MGCOGE3UN_H
-#define _CONFIG_MGCOGE3UN_H
-
-/* include common defines/options for all arm based Keymile boards */
-#include "km/km_arm.h"
-
-/*
- * Version number information
- */
-#define CONFIG_IDENT_STRING "\nKeymile MGCOGE3UN"
-#define CONFIG_HOSTNAME mgcoge3un
-#define CONFIG_MGCOGE3UN
-
-#define KM_IVM_BUS "pca9547:70:9" /* I2C2 (Mux-Port 1)*/
-#define KM_ENV_BUS "pca9547:70:d" /* I2C2 (Mux-Port 5)*/
-
-/* we use a new RAM type on mgcoge3un board */
-#undef CONFIG_SYS_KWD_CONFIG
-#define CONFIG_SYS_KWD_CONFIG $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage-memphis.cfg
-
-/*
- * mgcoge3un has a fixed link to the marvell switch
- * with 100MB full duplex and autoneg off, for this
- * reason we have to change the default settings
- */
-#define PORT_SERIAL_CONTROL_VALUE ( \
- MVGBE_FORCE_LINK_PASS | \
- MVGBE_DIS_AUTO_NEG_FOR_DUPLX | \
- MVGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL | \
- MVGBE_ADV_NO_FLOW_CTRL | \
- MVGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX | \
- MVGBE_FORCE_BP_MODE_NO_JAM | \
- (1 << 9) /* Reserved bit has to be 1 */ | \
- MVGBE_DO_NOT_FORCE_LINK_FAIL | \
- MVGBE_DIS_AUTO_NEG_SPEED_GMII | \
- MVGBE_DTE_ADV_0 | \
- MVGBE_MIIPHY_MAC_MODE | \
- MVGBE_AUTO_NEG_NO_CHANGE | \
- MVGBE_MAX_RX_PACKET_1552BYTE | \
- MVGBE_CLR_EXT_LOOPBACK | \
- MVGBE_SET_FULL_DUPLEX_MODE | \
- MVGBE_DIS_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX |\
- MVGBE_SET_GMII_SPEED_TO_10_100 |\
- MVGBE_SET_MII_SPEED_TO_100)
-
-#define CONFIG_KM_BOARD_EXTRA_ENV "waitforne=true\0"
-
-/*
- * PCIe port not used on mgcoge3un
- */
-#undef CONFIG_KIRKWOOD_PCIE_INIT
-
-#endif /* _CONFIG_MGCOGE3UN_H */
diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h
index 51b172d..8f60496 100644
--- a/include/configs/mx28evk.h
+++ b/include/configs/mx28evk.h
@@ -16,8 +16,8 @@
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
-#ifndef __CONFIG_H
-#define __CONFIG_H
+#ifndef __MX28EVK_CONFIG_H__
+#define __MX28EVK_CONFIG_H__
#include <asm/arch/regs-base.h>
@@ -34,7 +34,6 @@
#define CONFIG_SYS_ICACHE_OFF
#define CONFIG_SYS_DCACHE_OFF
#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_ARCH_CPU_INIT
#define CONFIG_ARCH_MISC_INIT
/*
@@ -54,11 +53,11 @@
#include <config_cmd_default.h>
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DOS_PARTITION
-#define CONFIG_CMD_FAT
#define CONFIG_CMD_CACHE
#define CONFIG_CMD_DATE
#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_FAT
#define CONFIG_CMD_GPIO
#define CONFIG_CMD_MII
#define CONFIG_CMD_MMC
@@ -250,4 +249,4 @@
"run netargs; " \
"dhcp ${uimage}; bootm\0" \
-#endif /* __CONFIG_H */
+#endif /* __MX28EVK_CONFIG_H__ */
diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h
index 016864a..ebbd371 100644
--- a/include/configs/mx35pdk.h
+++ b/include/configs/mx35pdk.h
@@ -59,7 +59,6 @@
#define CONFIG_I2C_MXC
#define CONFIG_SYS_I2C_MX35_PORT1
#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SLAVE 0xfe
#define CONFIG_MXC_SPI
#define CONFIG_MXC_GPIO
diff --git a/include/configs/mx53ard.h b/include/configs/mx53ard.h
index f4512ff..ffc799c 100644
--- a/include/configs/mx53ard.h
+++ b/include/configs/mx53ard.h
@@ -52,7 +52,6 @@
#define CONFIG_I2C_MXC
#define CONFIG_SYS_I2C_MX53_PORT2
#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SLAVE 0xfe
/* MMC Configs */
#define CONFIG_FSL_ESDHC
@@ -68,7 +67,6 @@
/* Eth Configs */
#define CONFIG_HAS_ETH1
#define CONFIG_MII
-#define CONFIG_MII_GASKET
#define CONFIG_DISCOVER_PHY
#define CONFIG_CMD_PING
diff --git a/include/configs/mx53evk.h b/include/configs/mx53evk.h
index a5f32e3..8f2c03f 100644
--- a/include/configs/mx53evk.h
+++ b/include/configs/mx53evk.h
@@ -55,7 +55,6 @@
#define CONFIG_I2C_MXC
#define CONFIG_SYS_I2C_MX53_PORT2 1
#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SLAVE 0xfe
/* PMIC Configs */
#define CONFIG_PMIC
diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h
index 8b4e008..e71148d 100644
--- a/include/configs/mx53loco.h
+++ b/include/configs/mx53loco.h
@@ -41,7 +41,6 @@
#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_BOARD_LATE_INIT
#define CONFIG_MXC_GPIO
#define CONFIG_REVISION_TAG
@@ -92,7 +91,6 @@
#define CONFIG_I2C_MXC
#define CONFIG_SYS_I2C_MX53_PORT1
#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SLAVE 0xfe
/* PMIC Controller */
#define CONFIG_PMIC
diff --git a/include/configs/mx53smd.h b/include/configs/mx53smd.h
index 0d7086d..1df20fa 100644
--- a/include/configs/mx53smd.h
+++ b/include/configs/mx53smd.h
@@ -52,7 +52,6 @@
#define CONFIG_I2C_MXC
#define CONFIG_SYS_I2C_MX53_PORT2
#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SLAVE 0xfe
/* MMC Configs */
#define CONFIG_FSL_ESDHC
diff --git a/include/configs/mx6qarm2.h b/include/configs/mx6qarm2.h
index a155c77..a9c1b15 100644
--- a/include/configs/mx6qarm2.h
+++ b/include/configs/mx6qarm2.h
@@ -37,7 +37,6 @@
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
-#define CONFIG_ARCH_CPU_INIT
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_MXC_GPIO
diff --git a/include/configs/mx6qsabrelite.h b/include/configs/mx6qsabrelite.h
index 5b566a8..fd25faf 100644
--- a/include/configs/mx6qsabrelite.h
+++ b/include/configs/mx6qsabrelite.h
@@ -40,7 +40,6 @@
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
-#define CONFIG_ARCH_CPU_INIT
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_MISC_INIT_R
#define CONFIG_MXC_GPIO
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index 268215c..657780e 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -146,6 +146,8 @@
/* commands to include */
#include <config_cmd_default.h>
+#define CONFIG_CMD_ASKENV
+
#define CONFIG_CMD_CACHE
#define CONFIG_CMD_EXT2 /* EXT2 Support */
#define CONFIG_CMD_FAT /* FAT support */
@@ -213,7 +215,7 @@
/* partition */
/* Environment information */
-#define CONFIG_BOOTDELAY 2
+#define CONFIG_BOOTDELAY 3
#define CONFIG_EXTRA_ENV_SETTINGS \
"loadaddr=0x80200000\0" \
diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h
index 1fcb7af..632a13f 100644
--- a/include/configs/omap3_evm.h
+++ b/include/configs/omap3_evm.h
@@ -42,6 +42,8 @@
*/
#include <config_cmd_default.h>
+#define CONFIG_CMD_ASKENV
+
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_FAT
#define CONFIG_CMD_JFFS2
@@ -134,7 +136,7 @@
* Default environment
* -----------------------------------------------------------------------------
*/
-#define CONFIG_BOOTDELAY 10
+#define CONFIG_BOOTDELAY 3
#define CONFIG_EXTRA_ENV_SETTINGS \
"loadaddr=0x82000000\0" \
diff --git a/include/configs/omap4_common.h b/include/configs/omap4_common.h
index 8448142..2192c2b 100644
--- a/include/configs/omap4_common.h
+++ b/include/configs/omap4_common.h
@@ -120,9 +120,6 @@
/* Flash */
#define CONFIG_SYS_NO_FLASH 1
-/* clocks */
-#define CONFIG_SYS_CLOCKS_ENABLE_ALL
-
/* commands to include */
#include <config_cmd_default.h>
@@ -281,9 +278,7 @@
#define CONFIG_SPL_FAT_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/omap-common/u-boot-spl.lds"
-
-#define CONFIG_SYS_ENABLE_PADS_ALL
+#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
#define CONFIG_SYS_THUMB_BUILD
diff --git a/include/configs/omap5_evm.h b/include/configs/omap5_evm.h
index 60c7a29..c5874bb 100644
--- a/include/configs/omap5_evm.h
+++ b/include/configs/omap5_evm.h
@@ -50,8 +50,6 @@
/* Clock Defines */
#define V_OSCK 19200000 /* Clock output from T2 */
#define V_SCLK V_OSCK
-#define CONFIG_SYS_CLOCKS_ENABLE_ALL 1 /* Enable all clocks */
-#define CONFIG_SYS_ENABLE_PADS_ALL 1 /* Enable all PADS for now */
#undef CONFIG_USE_IRQ /* no support for IRQs */
#define CONFIG_MISC_INIT_R
@@ -261,7 +259,7 @@
#define CONFIG_SPL_FAT_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/omap-common/u-boot-spl.lds"
+#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
/*
* 64 bytes before this address should be set aside for u-boot.img's
diff --git a/include/configs/paz00.h b/include/configs/paz00.h
index f53f20e..0dd1e83 100644
--- a/include/configs/paz00.h
+++ b/include/configs/paz00.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2010,2011, NVIDIA CORPORATION. All rights reserved.
+ * Copyright (c) 2010-2012 NVIDIA CORPORATION. All rights reserved.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -20,8 +20,12 @@
#include <asm/sizes.h>
#include "tegra2-common.h"
+/* Enable fdt support for Paz00. Flash the image in u-boot-dtb.bin */
+#define CONFIG_DEFAULT_DEVICE_TREE tegra2-paz00
+#define CONFIG_OF_CONTROL
+#define CONFIG_OF_SEPARATE
+
/* High-level configuration options */
-#define TEGRA2_SYSMEM "mem=512M@0M"
#define V_PROMPT "Tegra2 (Paz00) MOD # "
#define CONFIG_TEGRA2_BOARD_STRING "Compal Paz00"
@@ -31,14 +35,13 @@
#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE
#define CONFIG_MACH_TYPE MACH_TYPE_PAZ00
-#define CONFIG_SYS_BOARD_ODMDATA 0x800c0085 /* lp1, 512MB */
#define CONFIG_BOARD_EARLY_INIT_F
/* SD/MMC */
#define CONFIG_MMC
#define CONFIG_GENERIC_MMC
-#define CONFIG_TEGRA2_MMC
+#define CONFIG_TEGRA_MMC
#define CONFIG_CMD_MMC
#define CONFIG_DOS_PARTITION
@@ -46,6 +49,25 @@
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_FAT
-/* Environment not stored */
-#define CONFIG_ENV_IS_NOWHERE
+/* Environment in eMMC, at the end of 2nd "boot sector" */
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_ENV_OFFSET ((2 * 1024 * 1024) - CONFIG_ENV_SIZE)
+#define CONFIG_SYS_MMC_ENV_DEV 0
+
+/* USB Host support */
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_TEGRA
+#define CONFIG_USB_STORAGE
+#define CONFIG_CMD_USB
+
+/* USB networking support */
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+
+/* General networking support */
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_DHCP
+
+#include "tegra2-common-post.h"
+
#endif /* __CONFIG_H */
diff --git a/include/configs/plutux.h b/include/configs/plutux.h
index f869191..6397eb1 100644
--- a/include/configs/plutux.h
+++ b/include/configs/plutux.h
@@ -29,10 +29,8 @@
#include "tegra2-common.h"
/* High-level configuration options */
-#define TEGRA2_SYSMEM "mem=384M@0M nvmem=128M@384M"
#define V_PROMPT "Tegra2 (Plutux) # "
#define CONFIG_TEGRA2_BOARD_STRING "Avionic Design Plutux"
-#define CONFIG_SYS_BOARD_ODMDATA 0x2b2d8011
/* Board-specific serial config */
#define CONFIG_SERIAL_MULTI
@@ -46,7 +44,7 @@
/* SD/MMC */
#define CONFIG_MMC
#define CONFIG_GENERIC_MMC
-#define CONFIG_TEGRA2_MMC
+#define CONFIG_TEGRA_MMC
#define CONFIG_CMD_MMC
#define CONFIG_DOS_PARTITION
@@ -61,4 +59,6 @@
"ext2load mmc 0 0x17000000 /boot/uImage;" \
"bootm"
+#include "tegra2-common-post.h"
+
#endif /* __CONFIG_H */
diff --git a/include/configs/portl2.h b/include/configs/portl2.h
deleted file mode 100644
index e436cfe..0000000
--- a/include/configs/portl2.h
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * (C) Copyright 2009
- * Marvell Semiconductor <www.marvell.com>
- * Prafulla Wadaskar <prafulla@marvell.com>
- *
- * (C) Copyright 2009
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * (C) Copyright 2010-2011
- * Holger Brunck, Keymile GmbH Hannover, holger.brunck@keymile.com.
- * Valentin Longchamp, Keymile AG Bern, valentin.longchamp@keymile.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301 USA
- */
-
-/* for linking errors see
- * http://lists.denx.de/pipermail/u-boot/2009-July/057350.html */
-
-#ifndef _CONFIG_PORTL2_H
-#define _CONFIG_PORTL2_H
-
-/* include common defines/options for all arm based Keymile boards */
-#include "km/km_arm.h"
-
-/*
- * Version number information
- */
-#define CONFIG_IDENT_STRING "\nKeymile Port-L2"
-#define CONFIG_HOSTNAME portl2
-#define CONFIG_PORTL2
-
-#define KM_IVM_BUS "pca9544a:70:9" /* I2C2 (Mux-Port 1)*/
-/*
- * Note: This is only valid for HW > P1A if you got an outdated P1A
- * use KM_ENV_BUS "pca9544a:70:a"
- */
-#define KM_ENV_BUS "pca9544a:70:d" /* I2C2 (Mux-Port 5)*/
-
-/*
- * portl2 has a fixed link to the XMPP backplane
- * with 100MB full duplex and autoneg off, for this
- * reason we have to change the default settings
- */
-#define PORT_SERIAL_CONTROL_VALUE ( \
- MVGBE_FORCE_LINK_PASS | \
- MVGBE_DIS_AUTO_NEG_FOR_DUPLX | \
- MVGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL | \
- MVGBE_ADV_NO_FLOW_CTRL | \
- MVGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX | \
- MVGBE_FORCE_BP_MODE_NO_JAM | \
- (1 << 9) /* Reserved bit has to be 1 */ | \
- MVGBE_DO_NOT_FORCE_LINK_FAIL | \
- MVGBE_DIS_AUTO_NEG_SPEED_GMII | \
- MVGBE_DTE_ADV_0 | \
- MVGBE_MIIPHY_MAC_MODE | \
- MVGBE_AUTO_NEG_NO_CHANGE | \
- MVGBE_MAX_RX_PACKET_1552BYTE | \
- MVGBE_CLR_EXT_LOOPBACK | \
- MVGBE_SET_FULL_DUPLEX_MODE | \
- MVGBE_DIS_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX |\
- MVGBE_SET_GMII_SPEED_TO_10_100 |\
- MVGBE_SET_MII_SPEED_TO_100)
-
-/*
- * portl2 does use the PCIe Port0
- */
-#define CONFIG_KIRKWOOD_PCIE_INIT
-
-#endif /* _CONFIG_PORTL2_H */
diff --git a/include/configs/seaboard.h b/include/configs/seaboard.h
index 46d4228..f661583 100644
--- a/include/configs/seaboard.h
+++ b/include/configs/seaboard.h
@@ -41,7 +41,6 @@
#define CONFIG_OF_SEPARATE
/* High-level configuration options */
-#define TEGRA2_SYSMEM "mem=384M@0M nvmem=128M@384M mem=512M@512M"
#define V_PROMPT "Tegra2 (SeaBoard) # "
#define CONFIG_TEGRA2_BOARD_STRING "NVIDIA Seaboard"
@@ -54,19 +53,9 @@
#define CONFIG_UART_DISABLE_GPIO GPIO_PI3
#define CONFIG_MACH_TYPE MACH_TYPE_SEABOARD
-#define CONFIG_SYS_BOARD_ODMDATA 0x300d8011 /* lp1, 1GB */
#define CONFIG_BOARD_EARLY_INIT_F
-/* SPI */
-#define CONFIG_TEGRA2_SPI
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_WINBOND
-#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
-#define CONFIG_CMD_SPI
-#define CONFIG_CMD_SF
-#define CONFIG_SPI_FLASH_SIZE (4 << 20)
-
/* I2C */
#define CONFIG_TEGRA_I2C
#define CONFIG_SYS_I2C_INIT_BOARD
@@ -78,7 +67,7 @@
/* SD/MMC */
#define CONFIG_MMC
#define CONFIG_GENERIC_MMC
-#define CONFIG_TEGRA2_MMC
+#define CONFIG_TEGRA_MMC
#define CONFIG_CMD_MMC
#define CONFIG_DOS_PARTITION
@@ -86,13 +75,10 @@
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_FAT
-/* Environment in SPI */
-#define CONFIG_ENV_IS_IN_SPI_FLASH
-#define CONFIG_ENV_SPI_MAX_HZ 48000000
-#define CONFIG_ENV_SPI_MODE SPI_MODE_0
-
-#define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE
-#define CONFIG_ENV_OFFSET (CONFIG_SPI_FLASH_SIZE - CONFIG_ENV_SECT_SIZE)
+/* Environment in eMMC, at the end of 2nd "boot sector" */
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_ENV_OFFSET ((2 * 512 * 1024) - CONFIG_ENV_SIZE)
+#define CONFIG_SYS_MMC_ENV_DEV 0
/* USB Host support */
#define CONFIG_USB_EHCI
@@ -100,6 +86,14 @@
#define CONFIG_USB_STORAGE
#define CONFIG_CMD_USB
+/* USB networking support */
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+
+/* General networking support */
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_DHCP
+
/* Enable keyboard */
#define CONFIG_TEGRA2_KEYBOARD
#define CONFIG_KEYBOARD
@@ -108,4 +102,7 @@
#define TEGRA2_DEVICE_SETTINGS "stdin=serial,tegra-kbc\0" \
"stdout=serial\0" \
"stderr=serial\0"
+
+#include "tegra2-common-post.h"
+
#endif /* __CONFIG_H */
diff --git a/include/configs/spear-common.h b/include/configs/spear-common.h
index ab1b332..a6d1cfb 100644
--- a/include/configs/spear-common.h
+++ b/include/configs/spear-common.h
@@ -27,18 +27,33 @@
* Common configurations used for both spear3xx as well as spear6xx
*/
+/* U-boot Load Address */
+#define CONFIG_SYS_TEXT_BASE 0x00700000
+
+/* Ethernet driver configuration */
+#define CONFIG_MII
+#define CONFIG_DESIGNWARE_ETH
+#define CONFIG_DW_SEARCH_PHY
+#define CONFIG_DW0_PHY 1
+#define CONFIG_NET_MULTI
+#define CONFIG_PHY_RESET_DELAY 10000 /* in usec */
+#define CONFIG_DW_AUTONEG
+#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */
+
/* USBD driver configuration */
+#if defined(CONFIG_SPEAR_USBTTY)
#define CONFIG_DW_UDC
#define CONFIG_USB_DEVICE
+#define CONFIG_USBD_HS
#define CONFIG_USB_TTY
#define CONFIG_USBD_PRODUCT_NAME "SPEAr SoC"
#define CONFIG_USBD_MANUFACTURER "ST Microelectronics"
-#if defined(CONFIG_USB_TTY)
-#define CONFIG_EXTRA_ENV_USBTTY "usbtty=cdc_acm\0"
#endif
+#define CONFIG_EXTRA_ENV_USBTTY "usbtty=cdc_acm\0"
+
/* I2C driver configuration */
#define CONFIG_HARD_I2C
#define CONFIG_DW_I2C
@@ -48,27 +63,25 @@
#define CONFIG_I2C_CHIPADDRESS 0x50
/* Timer, HZ specific defines */
-#define CONFIG_SYS_HZ (1000)
-#define CONFIG_SYS_HZ_CLOCK (8300000)
+#define CONFIG_SYS_HZ 1000
/* Flash configuration */
#if defined(CONFIG_FLASH_PNOR)
-#define CONFIG_SPEAR_EMI 1
+#define CONFIG_SPEAR_EMI
#else
-#define CONFIG_SPEARSMI 1
+#define CONFIG_ST_SMI
#endif
-#if defined(CONFIG_SPEARSMI)
+#if defined(CONFIG_ST_SMI)
#define CONFIG_SYS_MAX_FLASH_BANKS 2
-#define CONFIG_SYS_FLASH_BASE (0xF8000000)
-#define CONFIG_SYS_CS1_FLASH_BASE (0xF9000000)
-#define CONFIG_SYS_FLASH_BANK_SIZE (0x01000000)
+#define CONFIG_SYS_FLASH_BASE 0xF8000000
+#define CONFIG_SYS_CS1_FLASH_BASE 0xF9000000
+#define CONFIG_SYS_FLASH_BANK_SIZE 0x01000000
#define CONFIG_SYS_FLASH_ADDR_BASE {CONFIG_SYS_FLASH_BASE, \
CONFIG_SYS_CS1_FLASH_BASE}
#define CONFIG_SYS_MAX_FLASH_SECT 128
-#define CONFIG_SYS_FLASH_EMPTY_INFO 1
#define CONFIG_SYS_FLASH_ERASE_TOUT (3 * CONFIG_SYS_HZ)
#define CONFIG_SYS_FLASH_WRITE_TOUT (3 * CONFIG_SYS_HZ)
@@ -88,11 +101,13 @@
#define CONFIG_SYS_LOADS_BAUD_CHANGE
/* NAND FLASH Configuration */
+#define CONFIG_SYS_NAND_SELF_INIT
#define CONFIG_MTD_DEVICE
#define CONFIG_MTD_PARTITIONS
-#define CONFIG_NAND_SPEAR 1
+#define CONFIG_NAND_FSMC
#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_MTD_NAND_VERIFY_WRITE 1
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+#define CONFIG_SYS_NAND_QUIET_TEST
/*
* Command support defines
@@ -103,11 +118,13 @@
#define CONFIG_CMD_MEMORY
#define CONFIG_CMD_RUN
#define CONFIG_CMD_SAVES
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <config_cmd_default.h>
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_NFS
/*
* Default Environment Varible definitions
@@ -124,13 +141,13 @@
* U-Boot Environment placing definitions.
*/
#if defined(CONFIG_ENV_IS_IN_FLASH)
-#ifdef CONFIG_SPEARSMI
+#ifdef CONFIG_ST_SMI
/*
* Environment is in serial NOR flash
*/
#define CONFIG_SYS_MONITOR_LEN 0x00040000
#define CONFIG_ENV_SECT_SIZE 0x00010000
-#define CONFIG_FSMTDBLK "/dev/mtdblock8 "
+#define CONFIG_FSMTDBLK "/dev/mtdblock3 "
#define CONFIG_BOOTCOMMAND "bootm 0xf8050000"
@@ -146,8 +163,7 @@
"0x4C0000; bootm 0x1600000"
#endif
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \
+#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + \
CONFIG_SYS_MONITOR_LEN)
#elif defined(CONFIG_ENV_IS_IN_NAND)
/*
@@ -156,28 +172,46 @@
#define CONFIG_ENV_OFFSET 0x60000
#define CONFIG_ENV_RANGE 0x10000
-#define CONFIG_FSMTDBLK "/dev/mtdblock12 "
+#define CONFIG_FSMTDBLK "/dev/mtdblock7 "
#define CONFIG_BOOTCOMMAND "nand read.jffs2 0x1600000 " \
"0x80000 0x4C0000; " \
"bootm 0x1600000"
#endif
-#define CONFIG_BOOTARGS_NFS "root=/dev/nfs ip=dhcp " \
- "console=ttyS0 init=/bin/sh"
-#define CONFIG_BOOTARGS "console=ttyS0 mem=128M " \
+#define CONFIG_BOOTARGS "console=ttyAMA0,115200 " \
+ "mem=128M " \
"root="CONFIG_FSMTDBLK \
"rootfstype=jffs2"
+#define CONFIG_NFSBOOTCOMMAND \
+ "bootp; " \
+ "setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=$(serverip):$(rootpath) " \
+ "ip=$(ipaddr):$(serverip):$(gatewayip):" \
+ "$(netmask):$(hostname):$(netdev):off " \
+ "console=ttyAMA0,115200 $(othbootargs);" \
+ "bootm; "
+
+#define CONFIG_RAMBOOTCOMMAND \
+ "setenv bootargs root=/dev/ram rw " \
+ "console=ttyAMA0,115200 $(othbootargs);" \
+ CONFIG_BOOTCOMMAND
+
+
#define CONFIG_ENV_SIZE 0x02000
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
/* Miscellaneous configurable options */
+#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_BOOT_PARAMS_ADDR 0x00000100
-#define CONFIG_CMDLINE_TAG 1
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_MISC_INIT_R 1
-#define CONFIG_ZERO_BOOTDELAY_CHECK 1
-#define CONFIG_AUTOBOOT_KEYED 1
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_MISC_INIT_R
+#define CONFIG_ZERO_BOOTDELAY_CHECK
+#define CONFIG_AUTOBOOT_KEYED
#define CONFIG_AUTOBOOT_STOP_STR " "
#define CONFIG_AUTOBOOT_PROMPT \
"Hit SPACE in %d seconds to stop autoboot.\n", bootdelay
@@ -195,9 +229,9 @@
#define CONFIG_SYS_MAXARGS 16
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
#define CONFIG_SYS_LOAD_ADDR 0x00800000
-#define CONFIG_SYS_CONSOLE_INFO_QUIET 1
+#define CONFIG_SYS_CONSOLE_INFO_QUIET
-#define CONFIG_EXTRA_ENV_SETTINGS CONFIG_EXTRA_ENV_USBTTY
+#define CONFIG_SYS_FLASH_EMPTY_INFO
/* Stack sizes */
#define CONFIG_STACKSIZE (128*1024)
diff --git a/include/configs/spear3xx.h b/include/configs/spear3xx_evb.h
index 37bdebb..3cd56dc 100644
--- a/include/configs/spear3xx.h
+++ b/include/configs/spear3xx_evb.h
@@ -29,18 +29,44 @@
* (easy to change)
*/
#if defined(CONFIG_spear300)
-#define CONFIG_SPEAR3XX 1
-#define CONFIG_SPEAR300 1
+#define CONFIG_SPEAR3XX
+#define CONFIG_SPEAR300
#elif defined(CONFIG_spear310)
-#define CONFIG_SPEAR3XX 1
-#define CONFIG_SPEAR310 1
+#define CONFIG_SPEAR3XX
+#define CONFIG_SPEAR310
#elif defined(CONFIG_spear320)
-#define CONFIG_SPEAR3XX 1
-#define CONFIG_SPEAR320 1
+#define CONFIG_SPEAR3XX
+#define CONFIG_SPEAR320
+#endif
+
+#if defined(CONFIG_usbtty)
+#define CONFIG_SPEAR_USBTTY
+#endif
+
+#if defined(CONFIG_nand)
+#define CONFIG_ENV_IS_IN_NAND
+#else
+#define CONFIG_ENV_IS_IN_FLASH
#endif
#include <configs/spear-common.h>
+/* Ethernet driver configuration */
+#define CONFIG_DW_ALTDESCRIPTOR
+
+#if defined(CONFIG_SPEAR310)
+#define CONFIG_MACB
+#define CONFIG_MACB0_PHY 0x01
+#define CONFIG_MACB1_PHY 0x03
+#define CONFIG_MACB2_PHY 0x05
+#define CONFIG_MACB3_PHY 0x07
+
+#elif defined(CONFIG_SPEAR320)
+#define CONFIG_MACB
+#define CONFIG_MACB0_PHY 0x01
+
+#endif
+
/* Serial Configuration (PL011) */
#define CONFIG_SYS_SERIAL0 0xD0000000
@@ -85,6 +111,7 @@
#define CONFIG_FLASH_CFI_DRIVER
#if defined(CONFIG_SPEAR310)
+#define CONFIG_SYS_FLASH_PROTECTION
#define CONFIG_SYS_FLASH_BASE 0x50000000
#define CONFIG_SYS_CS1_FLASH_BASE 0x60000000
#define CONFIG_SYS_CS2_FLASH_BASE 0x70000000
@@ -100,6 +127,7 @@
#define CONFIG_SYS_MAX_FLASH_BANKS 6
#elif defined(CONFIG_SPEAR320)
+#define CONFIG_SYS_FLASH_PROTECTION
#define CONFIG_SYS_FLASH_BASE 0x44000000
#define CONFIG_SYS_CS1_FLASH_BASE 0x45000000
#define CONFIG_SYS_CS2_FLASH_BASE 0x46000000
@@ -113,19 +141,33 @@
#endif
#define CONFIG_SYS_MAX_FLASH_SECT (127 + 8)
-#define CONFIG_SYS_FLASH_QUIET_TEST 1
+#define CONFIG_SYS_FLASH_QUIET_TEST
#endif
+/* NAND flash configuration */
+#define CONFIG_SYS_FSMC_NAND_SP
+#define CONFIG_SYS_FSMC_NAND_8BIT
+
#if defined(CONFIG_SPEAR300)
-#define CONFIG_SYS_NAND_BASE (0x80000000)
+#define CONFIG_SYS_NAND_BASE 0x80000000
#elif defined(CONFIG_SPEAR310)
-#define CONFIG_SYS_NAND_BASE (0x40000000)
+#define CONFIG_SYS_NAND_BASE 0x40000000
#elif defined(CONFIG_SPEAR320)
-#define CONFIG_SYS_NAND_BASE (0x50000000)
+#define CONFIG_SYS_NAND_BASE 0x50000000
+
+#endif
+
+/* Environment Settings */
+#if defined(CONFIG_SPEAR300)
+#define CONFIG_EXTRA_ENV_SETTINGS CONFIG_EXTRA_ENV_USBTTY
+#elif defined(CONFIG_SPEAR310) || defined(CONFIG_SPEAR320)
+#define CONFIG_EXTRA_ENV_UNLOCK "unlock=yes\0"
+#define CONFIG_EXTRA_ENV_SETTINGS CONFIG_EXTRA_ENV_USBTTY \
+ CONFIG_EXTRA_ENV_UNLOCK
#endif
#endif /* __CONFIG_H */
diff --git a/include/configs/spear6xx.h b/include/configs/spear6xx_evb.h
index 2ad5beb..31b8725 100644
--- a/include/configs/spear6xx.h
+++ b/include/configs/spear6xx_evb.h
@@ -28,7 +28,17 @@
* High Level Configuration Options
* (easy to change)
*/
-#define CONFIG_SPEAR600 1
+#define CONFIG_SPEAR600
+
+#if defined(CONFIG_usbtty)
+#define CONFIG_SPEAR_USBTTY
+#endif
+
+#if defined(CONFIG_nand)
+#define CONFIG_ENV_IS_IN_NAND
+#else
+#define CONFIG_ENV_IS_IN_FLASH
+#endif
#include <configs/spear-common.h>
@@ -38,6 +48,12 @@
#define CONFIG_PL01x_PORTS { (void *)CONFIG_SYS_SERIAL0, \
(void *)CONFIG_SYS_SERIAL1 }
-#define CONFIG_SYS_NAND_BASE (0xD2000000)
+/* NAND flash configuration */
+#define CONFIG_SYS_FSMC_NAND_SP
+#define CONFIG_SYS_FSMC_NAND_8BIT
+#define CONFIG_SYS_NAND_BASE 0xD2000000
+
+/* Environment Settings */
+#define CONFIG_EXTRA_ENV_SETTINGS CONFIG_EXTRA_ENV_USBTTY
#endif /* __CONFIG_H */
diff --git a/include/configs/tegra2-common-post.h b/include/configs/tegra2-common-post.h
new file mode 100644
index 0000000..0484a52
--- /dev/null
+++ b/include/configs/tegra2-common-post.h
@@ -0,0 +1,117 @@
+/*
+ * (C) Copyright 2010-2012
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __TEGRA2_COMMON_POST_H
+#define __TEGRA2_COMMON_POST_H
+
+#ifdef CONFIG_BOOTCOMMAND
+
+#define BOOTCMDS_COMMON ""
+
+#else
+
+#ifdef CONFIG_CMD_EXT2
+#define BOOTCMD_FS_EXT2 "ext2 "
+#else
+#define BOOTCMD_FS_EXT2 ""
+#endif
+
+#ifdef CONFIG_CMD_FAT
+#define BOOTCMD_FS_FAT "fat"
+#else
+#define BOOTCMD_FS_FAT ""
+#endif
+
+#ifdef CONFIG_CMD_MMC
+#define BOOTCMDS_MMC \
+ "mmc_boot=" \
+ "setenv devtype mmc; " \
+ "if mmc dev ${devnum}; then " \
+ "run script_boot; " \
+ "fi\0" \
+ "mmc0_boot=setenv devnum 0; run mmc_boot;\0" \
+ "mmc1_boot=setenv devnum 1; run mmc_boot;\0" \
+ "bootcmd_mmc=run mmc1_boot; run mmc0_boot\0"
+#define BOOTCMD_MMC "run bootcmd_mmc; "
+#else
+#define BOOTCMDS_MMC ""
+#define BOOTCMD_MMC ""
+#endif
+
+#ifdef CONFIG_CMD_USB
+#define BOOTCMDS_USB \
+ "usb_boot=" \
+ "setenv devtype usb; " \
+ "if usb dev ${devnum}; then " \
+ "run script_boot; " \
+ "fi\0" \
+ "usb0_boot=setenv devnum 0; run usb_boot;\0" \
+ "bootcmd_usb=run usb0_boot\0"
+#define BOOTCMD_USB "run bootcmd_usb; "
+#define BOOTCMD_INIT_USB "usb start 0; "
+#else
+#define BOOTCMDS_USB ""
+#define BOOTCMD_USB ""
+#define BOOTCMD_INIT_USB ""
+#endif
+
+#ifdef CONFIG_CMD_DHCP
+#define BOOTCMDS_DHCP \
+ "bootcmd_dhcp=" \
+ "if dhcp ${scriptaddr} boot.scr.uimg; then "\
+ "source ${scriptaddr}; " \
+ "fi\0"
+#define BOOTCMD_DHCP "run bootcmd_dhcp; "
+#else
+#define BOOTCMDS_DHCP ""
+#define BOOTCMD_DHCP ""
+#endif
+
+#define BOOTCMDS_COMMON \
+ "scriptaddr=0x400000\0" \
+ "rootpart=1\0" \
+ "script_boot=" \
+ "for fs in " BOOTCMD_FS_EXT2 BOOTCMD_FS_FAT "; do " \
+ "for prefix in / /boot/; do " \
+ "for script in boot.scr.uimg boot.scr; do " \
+ "echo Scanning ${devtype} ${devnum}:${rootpart} ${fs} ${prefix}${script} ...; " \
+ "if ${fs}load ${devtype} ${devnum}:${rootpart} ${scriptaddr} ${prefix}${script}; then " \
+ "echo ${script} found! Executing ...;" \
+ "source ${scriptaddr};" \
+ "fi; " \
+ "done; " \
+ "done; " \
+ "done;\0" \
+ BOOTCMDS_MMC \
+ BOOTCMDS_USB \
+ BOOTCMDS_DHCP
+
+#define CONFIG_BOOTCOMMAND BOOTCMD_INIT_USB BOOTCMD_USB BOOTCMD_MMC BOOTCMD_DHCP
+
+#endif
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ TEGRA2_DEVICE_SETTINGS \
+ BOOTCMDS_COMMON
+
+#endif /* __TEGRA2_COMMON_POST_H */
diff --git a/include/configs/tegra2-common.h b/include/configs/tegra2-common.h
index 52dc38e..94e1aa6 100644
--- a/include/configs/tegra2-common.h
+++ b/include/configs/tegra2-common.h
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2010,2011
+ * (C) Copyright 2010-2012
* NVIDIA Corporation <www.nvidia.com>
*
* See file CREDITS for list of people who contributed to this
@@ -139,12 +139,6 @@
"stdout=serial\0" \
"stderr=serial\0"
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "console=ttyS0,115200n8\0" \
- "mem=" TEGRA2_SYSMEM "\0" \
- "smpflag=smp\0" \
- TEGRA2_DEVICE_SETTINGS
-
#define CONFIG_LOADADDR 0x408000 /* def. location for kernel */
#define CONFIG_BOOTDELAY 2 /* -1 to disable auto boot */
@@ -196,6 +190,6 @@
CONFIG_SYS_INIT_RAM_SIZE - \
GENERATED_GBL_DATA_SIZE)
-#define CONFIG_TEGRA2_GPIO
+#define CONFIG_TEGRA_GPIO
#define CONFIG_CMD_GPIO
#endif /* __TEGRA2_COMMON_H */
diff --git a/include/configs/tk71.h b/include/configs/tk71.h
new file mode 100644
index 0000000..f929f20
--- /dev/null
+++ b/include/configs/tk71.h
@@ -0,0 +1,130 @@
+/*
+ * Copyright (C) 2012 Marek Vasut <marex@denx.de>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#ifndef __CONFIG_TK71_H__
+#define __CONFIG_TK71_H__
+
+/*
+ * Version number information
+ */
+#define CONFIG_IDENT_STRING "\nKa-Ro TK71"
+
+/*
+ * High Level Configuration Options (easy to change)
+ */
+#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */
+#define CONFIG_KIRKWOOD 1 /* SOC Family Name */
+#define CONFIG_KW88F6281 1 /* SOC Name */
+#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
+#define CONFIG_NR_DRAM_BANKS 1
+
+#define MACH_TYPE_TK71 2399
+#define CONFIG_MACH_TYPE MACH_TYPE_TK71
+
+/*
+ * Commands configuration
+ */
+#define CONFIG_SYS_HUSH_PARSER
+
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_DOS_PARTITION
+#define CONFIG_SUPPORT_VFAT
+
+#include <config_cmd_default.h>
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_USB
+
+/*
+ * mv-common.h should be defined after CMD configs since it used them
+ * to enable certain macros
+ */
+#include "mv-common.h"
+
+/*
+ * NAND flash
+ */
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_JFFS2_NAND
+#define CONFIG_JFFS2_DEV "nand0,3"
+#endif
+
+/*
+ * Ethernet Driver configuration
+ */
+#ifdef CONFIG_CMD_NET
+#define CONFIG_MVGBE_PORTS {1, 0}
+#define CONFIG_PHY_BASE_ADR 0x08
+#endif
+
+/*
+ * USB/EHCI
+ */
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_KIRKWOOD
+#define CONFIG_EHCI_IS_TDI
+#define CONFIG_USB_STORAGE
+#endif
+
+/*
+ * Environment variables configurations
+ */
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_SECT_SIZE 0x20000
+#else
+#define CONFIG_ENV_IS_NOWHERE
+#endif
+
+#define CONFIG_ENV_SIZE 0x20000
+#define CONFIG_ENV_ADDR 0x80000
+#define CONFIG_ENV_OFFSET 0x80000
+
+/*
+ * Default environment variables
+ */
+#define CONFIG_BOOTCOMMAND "nand read 0x800000 kernel 0x300000; bootm;"
+#define CONFIG_MTDPARTS "512K(u-boot),512K(u-boot-env),3M(kernel),-(root)"
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "update_uboot=dhcp u-boot.kwb; nand erase.part u-boot; nand write ${fileaddr} u-boot ${filesize}\0" \
+ "update_kernel=dhcp uImage-tk71; nand erase.part kernel; nand write ${fileaddr} kernel ${filesize} \0" \
+ "update_rootfs=dhcp rootfs-tk71; nand erase.part root; nand write ${fileaddr} root ${filesize}\0" \
+ "update_all=run update_uboot; run update_kernel; run update_rootfs; reset\0" \
+ "mtdids=nand0=orion_nand\0" \
+ "mtdparts=mtdparts=orion_nand:"CONFIG_MTDPARTS"\0" \
+ "bootargs=console=ttyS0,115200 mtdparts=orion_nand:"CONFIG_MTDPARTS" rootfstype=jffs2 root=/dev/mtdblock3 rw\0"
+#define MTDIDS_DEFAULT "nand0=orion_nand"
+#define MTDPARTS_DEFAULT "mtdparts=orion_nand:"CONFIG_MTDPARTS
+
+#define PHYS_SDRAM_1 0x00000000 /* Base address */
+#define PHYS_SDRAM_1_SIZE 0x20000000 /* Max 512 MB RAM */
+
+#endif /* __CONFIG_TK71_H__ */
diff --git a/include/configs/trimslice.h b/include/configs/trimslice.h
new file mode 100644
index 0000000..34be8a9
--- /dev/null
+++ b/include/configs/trimslice.h
@@ -0,0 +1,99 @@
+/*
+ * (C) Copyright 2010-2012
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <asm/sizes.h>
+#include "tegra2-common.h"
+
+/* Enable fdt support for TrimSlice. Flash the image in u-boot-dtb.bin */
+#define CONFIG_DEFAULT_DEVICE_TREE tegra2-trimslice
+#define CONFIG_OF_CONTROL
+#define CONFIG_OF_SEPARATE
+
+/* High-level configuration options */
+#define V_PROMPT "Tegra2 (TrimSlice) # "
+#define CONFIG_TEGRA2_BOARD_STRING "Compulab Trimslice"
+
+/* Board-specific serial config */
+#define CONFIG_SERIAL_MULTI
+#define CONFIG_TEGRA2_ENABLE_UARTA
+#define CONFIG_TEGRA2_UARTA_GPU
+#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE
+
+#define CONFIG_MACH_TYPE MACH_TYPE_TRIMSLICE
+
+#define CONFIG_BOARD_EARLY_INIT_F
+
+/* SPI */
+#define CONFIG_TEGRA_SPI
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_WINBOND
+#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
+#define CONFIG_CMD_SPI
+#define CONFIG_CMD_SF
+
+/* I2C */
+#define CONFIG_TEGRA_I2C
+#define CONFIG_SYS_I2C_INIT_BOARD
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_SYS_MAX_I2C_BUS 4
+#define CONFIG_SYS_I2C_SPEED 100000
+#define CONFIG_CMD_I2C
+
+/* SD/MMC */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_TEGRA_MMC
+#define CONFIG_CMD_MMC
+
+#define CONFIG_DOS_PARTITION
+#define CONFIG_EFI_PARTITION
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+
+/* Environment in SPI */
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_SPI_MAX_HZ 48000000
+#define CONFIG_ENV_SPI_MODE SPI_MODE_0
+#define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE
+#define CONFIG_ENV_OFFSET (512 * 1024)
+
+/* USB Host support */
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_TEGRA
+#define CONFIG_USB_STORAGE
+#define CONFIG_CMD_USB
+
+/* USB networking support */
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+
+/* General networking support */
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_DHCP
+
+#include "tegra2-common-post.h"
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/ventana.h b/include/configs/ventana.h
index 3e55fe5..5e4d538 100644
--- a/include/configs/ventana.h
+++ b/include/configs/ventana.h
@@ -28,12 +28,11 @@
#include "tegra2-common.h"
/* Enable fdt support for Ventana. Flash the image in u-boot-dtb.bin */
-#define CONFIG_DEFAULT_DEVICE_TREE tegra2-seaboard
+#define CONFIG_DEFAULT_DEVICE_TREE tegra2-ventana
#define CONFIG_OF_CONTROL
#define CONFIG_OF_SEPARATE
/* High-level configuration options */
-#define TEGRA2_SYSMEM "mem=384M@0M nvmem=128M@384M mem=512M@512M"
#define V_PROMPT "Tegra2 (Ventana) # "
#define CONFIG_TEGRA2_BOARD_STRING "NVIDIA Ventana"
@@ -43,14 +42,13 @@
#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE
#define CONFIG_MACH_TYPE MACH_TYPE_VENTANA
-#define CONFIG_SYS_BOARD_ODMDATA 0x300d8011 /* lp1, 1GB */
#define CONFIG_BOARD_EARLY_INIT_F
/* SD/MMC */
#define CONFIG_MMC
#define CONFIG_GENERIC_MMC
-#define CONFIG_TEGRA2_MMC
+#define CONFIG_TEGRA_MMC
#define CONFIG_CMD_MMC
#define CONFIG_DOS_PARTITION
@@ -58,6 +56,25 @@
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_FAT
-/* Environment not stored */
-#define CONFIG_ENV_IS_NOWHERE
+/* Environment in eMMC, at the end of 2nd "boot sector" */
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_ENV_OFFSET ((2 * 1024 * 1024) - CONFIG_ENV_SIZE)
+#define CONFIG_SYS_MMC_ENV_DEV 0
+
+/* USB Host support */
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_TEGRA
+#define CONFIG_USB_STORAGE
+#define CONFIG_CMD_USB
+
+/* USB networking support */
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+
+/* General networking support */
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_DHCP
+
+#include "tegra2-common-post.h"
+
#endif /* __CONFIG_H */
diff --git a/include/configs/vl_ma2sc.h b/include/configs/vl_ma2sc.h
new file mode 100644
index 0000000..24f89c9
--- /dev/null
+++ b/include/configs/vl_ma2sc.h
@@ -0,0 +1,463 @@
+/*
+ * (C) Copyright 2009-2012
+ * Jens Scharsig <esw@bus-elekronik.de>
+ * BuS Elektronik GmbH & Co. KG
+ *
+ * Configuation settings for the VL_MA2SC board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*--------------------------------------------------------------------------*/
+
+#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
+#define CONFIG_ARM926EJS /* This is an ARM926EJS Core */
+#define CONFIG_AT91FAMILY
+#define CONFIG_AT91SAM9263 /* It's an Atmel AT91SAM9263 SoC*/
+#define CONFIG_VL_MA2SC /* on an VL_MA2SC Board */
+#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_MISC_INIT_R
+
+#include <asm/hardware.h>
+
+#define MACH_TYPE_VL_MA2SC 2412
+#define CONFIG_MACH_TYPE MACH_TYPE_VL_MA2SC
+
+#define CONFIG_SYS_DCACHE_OFF
+
+#ifdef CONFIG_RAMLOAD
+#define CONFIG_SYS_TEXT_BASE 0x21000000
+#else
+#define CONFIG_SYS_TEXT_BASE 0x00000000
+#endif
+#define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */
+
+#define CONFIG_IDENT_STRING " on MiS Activ 2"
+#define CONFIG_VERSION_VARIABLE
+#define CONFIG_AT91_GPIO
+
+#if !defined(CONFIG_SYS_USE_NANDFLASH) && !defined(CONFIG_RAMLOAD)
+#define CONFIG_SYS_USE_NORFLASH
+#define CONFIG_SYS_USE_BOOT_NORFLASH
+#endif
+
+#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+
+#ifndef CONFIG_SYS_USE_BOOT_NORFLASH
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#endif
+
+/*
+ * Hardware drivers
+ */
+
+#define CONFIG_BOARD_EARLY_INIT_F
+
+#define CONFIG_WATCHDOG
+
+#define CONFIG_ATMEL_USART
+#define CONFIG_USART_BASE ATMEL_BASE_DBGU
+#define CONFIG_USART_ID ATMEL_ID_SYS
+
+/* LCD */
+#define CONFIG_LCD
+#define CONFIG_ATMEL_LCD
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_SYS_BLACK_ON_WHITE
+#define LCD_BPP LCD_COLOR8
+#define CONFIG_ATMEL_LCD_BGR555
+
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_BOOTDELAY 3
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_IMI
+#undef CONFIG_CMD_LOADS
+
+#define CONFIG_CMD_BMP
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_MD5SUM
+#define CONFIG_CMD_SHA1SUM
+/*
+#define CONFIG_CMD_SPI
+*/
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_USB
+
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_MD5
+#define CONFIG_SHA1
+
+/*----------------------------------------------------------------------------
+ * Hardware confuguration
+ *---------------------------------------------------------------------------*/
+
+/* USB */
+#define CONFIG_USB_ATMEL
+#define CONFIG_USB_OHCI_NEW
+#define CONFIG_DOS_PARTITION
+#define CONFIG_SYS_USB_OHCI_CPU_INIT
+#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00a00000 /* UHP_BASE */
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9263"
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
+#define CONFIG_USB_STORAGE
+#define CONFIG_AT91C_PQFP_UHPBUG
+
+/* I2C-Bus */
+
+#define CONFIG_SYS_I2C_SPEED 50000
+#define CONFIG_SYS_I2C_SLAVE 0 /* not used */
+
+#ifndef CONFIG_HARD_I2C
+#define CONFIG_SOFT_I2C
+
+/* Software I2C driver configuration */
+
+#define I2C_DELAY udelay(2500000/CONFIG_SYS_I2C_SPEED)
+
+#define AT91_PIN_SDA (1<<4) /* AT91C_PIO_PB4 */
+#define AT91_PIN_SCL (1<<5) /* AT91C_PIO_PB5 */
+
+#define I2C_INIT i2c_init_board();
+#define I2C_ACTIVE writel(AT91_PIN_SDA, &pio->piob.mddr);
+#define I2C_TRISTATE writel(AT91_PIN_SDA, &pio->piob.mder);
+#define I2C_READ ((readl(&pio->piob.pdsr) & AT91_PIN_SDA) != 0)
+#define I2C_SDA(bit) \
+ do { \
+ if (bit) \
+ writel(AT91_PIN_SDA, &pio->piob.sodr); \
+ else \
+ writel(AT91_PIN_SDA, &pio->piob.codr); \
+ } while (0);
+#define I2C_SCL(bit) \
+ do { \
+ if (bit) \
+ writel(AT91_PIN_SCL, &pio->piob.sodr); \
+ else \
+ writel(AT91_PIN_SCL, &pio->piob.codr); \
+ } while (0);
+#endif
+
+/* I2C-RTC */
+
+#ifdef CONFIG_CMD_DATE
+#define CONFIG_RTC_DS1338
+#define CONFIG_SYS_I2C_RTC_ADDR 0x68
+#endif
+
+/* EEPROM */
+
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
+#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
+
+/* define PDC[31:16] as DATA[31:16] */
+#define CONFIG_SYS_PIOD_PDR_VAL1 0xFFFF0000
+#define CONFIG_SYS_PIOD_PPUDR_VAL 0xFFFF0000
+
+/* EBI0_CSA, CS1 SDRAM, CS3 NAND Flash, 3.3V memories */
+#define CONFIG_SYS_MATRIX_EBI0CSA_VAL \
+ (AT91_MATRIX_CSA_DBPUC | AT91_MATRIX_CSA_VDDIOMSEL_3_3V | \
+ AT91_MATRIX_CSA_EBI_CS1A)
+
+/* user reset enable */
+#define CONFIG_SYS_RSTC_RMR_VAL \
+ (AT91_RSTC_KEY | \
+ AT91_RSTC_MR_URSTEN | \
+ AT91_RSTC_MR_ERSTL(15))
+
+/* Disable Watchdog */
+#define CONFIG_SYS_WDTC_WDMR_VAL \
+ (AT91_WDT_MR_WDIDLEHLT | AT91_WDT_MR_WDDBGHLT | \
+ AT91_WDT_MR_WDV(0xFFF) | \
+ AT91_WDT_MR_WDDIS | \
+ AT91_WDT_MR_WDD(0xFFF))
+
+/* clocks */
+
+#define CONFIG_SYS_HZ 1000
+#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock */
+
+#define MHZ180
+#if defined(MHZ199)
+/* 199,8994 MHZ */
+#define MASTER_PLL_MUL 911
+#define MASTER_PLL_DIV 56
+#define MASTER_PLL_OUT 2
+#elif defined(MHZ180)
+/* 180 MHZ */
+#define MASTER_PLL_MUL 1875
+#define MASTER_PLL_DIV 128
+#define MASTER_PLL_OUT 2
+#elif defined(MHZTEST)
+/* Test MHZ */
+#define CONFIG_DISPLAY_CPUINFO
+#define MASTER_PLL_MUL 8
+#define MASTER_PLL_DIV 1
+#define MASTER_PLL_OUT 2
+#else
+/* 176.9472 MHZ */
+#define MASTER_PLL_MUL 72
+#define MASTER_PLL_DIV 5
+#define MASTER_PLL_OUT 2
+#endif
+
+#define CONFIG_SYS_MOR_VAL \
+ (AT91_PMC_MOR_MOSCEN | AT91_PMC_MOR_OSCOUNT(255))
+
+#define CONFIG_SYS_PLLAR_VAL \
+ (AT91_PMC_PLLAR_29 | \
+ AT91_PMC_PLLXR_OUT(MASTER_PLL_OUT) | \
+ AT91_PMC_PLLXR_PLLCOUNT(63) | \
+ AT91_PMC_PLLXR_MUL(MASTER_PLL_MUL - 1) | \
+ AT91_PMC_PLLXR_DIV(MASTER_PLL_DIV))
+
+/* PCK/2 = MCK Master Clock from PLLA */
+#define CONFIG_SYS_MCKR1_VAL \
+ (AT91_PMC_MCKR_CSS_SLOW | AT91_PMC_MCKR_PRES_1 | \
+ AT91_PMC_MCKR_MDIV_2)
+
+/* PCK/2 = MCK Master Clock from PLLA */
+#define CONFIG_SYS_MCKR2_VAL \
+ (AT91_PMC_MCKR_CSS_PLLA | AT91_PMC_MCKR_PRES_1 | \
+ AT91_PMC_MCKR_MDIV_2)
+
+/* SDRAM */
+#define CONFIG_NR_DRAM_BANKS 1
+#define CONFIG_SYS_SDRAM_BASE 0x20000000
+#define CONFIG_SYS_SDRAM_SIZE 0x04000000 /* 64 megs */
+#define CONFIG_SYS_INIT_SP_ADDR 0x00504000 /* use internal SRAM0 */
+
+#define CONFIG_SYS_SDRC_MR_VAL1 0
+#define CONFIG_SYS_SDRC_TR_VAL1 700
+#define CONFIG_SYS_SDRC_CR_VAL \
+ (AT91_SDRAMC_NC_9 | \
+ AT91_SDRAMC_NR_13 | \
+ AT91_SDRAMC_NB_4 | \
+ AT91_SDRAMC_CAS_3 | \
+ AT91_SDRAMC_DBW_32 | \
+ (2 << 8) | /* Write Recovery Delay */ \
+ (7 << 12) | /* Row Cycle Delay */ \
+ (2 << 16) | /* Row Precharge Delay */ \
+ (2 << 20) | /* Row to Column Delay */ \
+ (5 << 24) | /* Active to Precharge Delay */ \
+ (8 << 28)) /* Exit Self Refresh to Active Delay */
+
+#define CONFIG_SYS_SDRC_MDR_VAL AT91_SDRAMC_MD_SDRAM
+#define CONFIG_SYS_SDRC_MR_VAL2 AT91_SDRAMC_MODE_PRECHARGE
+#define CONFIG_SYS_SDRAM_VAL1 0 /* SDRAM_BASE */
+#define CONFIG_SYS_SDRC_MR_VAL3 AT91_SDRAMC_MODE_REFRESH
+#define CONFIG_SYS_SDRAM_VAL2 0 /* SDRAM_BASE */
+#define CONFIG_SYS_SDRAM_VAL3 0 /* SDRAM_BASE */
+#define CONFIG_SYS_SDRAM_VAL4 0 /* SDRAM_BASE */
+#define CONFIG_SYS_SDRAM_VAL5 0 /* SDRAM_BASE */
+#define CONFIG_SYS_SDRAM_VAL6 0 /* SDRAM_BASE */
+#define CONFIG_SYS_SDRAM_VAL7 0 /* SDRAM_BASE */
+#define CONFIG_SYS_SDRAM_VAL8 0 /* SDRAM_BASE */
+#define CONFIG_SYS_SDRAM_VAL9 0 /* SDRAM_BASE */
+#define CONFIG_SYS_SDRC_MR_VAL4 AT91_SDRAMC_MODE_LMR
+#define CONFIG_SYS_SDRAM_VAL10 0 /* SDRAM_BASE */
+#define CONFIG_SYS_SDRC_MR_VAL5 AT91_SDRAMC_MODE_NORMAL
+#define CONFIG_SYS_SDRAM_VAL11 0 /* SDRAM_BASE */
+#define CONFIG_SYS_SDRC_TR_VAL2 1200 /* SDRAM_TR */
+#define CONFIG_SYS_SDRAM_VAL12 0 /* SDRAM_BASE */
+
+/* NOR flash */
+
+#define CONFIG_FLASH_SHOW_PROGRESS 45
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_FLASH_CFI_DRIVER
+#define PHYS_FLASH_1 0x10000000
+#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
+#define CONFIG_SYS_MAX_FLASH_SECT 256
+#define CONFIG_SYS_MAX_FLASH_BANKS 1
+
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x00060000)
+
+/* setup SMC0, CS0 (NOR Flash) - 16-bit, 15 WS */
+#define CONFIG_SYS_SMC0_SETUP0_VAL \
+ (AT91_SMC_SETUP_NWE(10) | AT91_SMC_SETUP_NCS_WR(10) | \
+ AT91_SMC_SETUP_NRD(10) | AT91_SMC_SETUP_NCS_RD(10))
+#define CONFIG_SYS_SMC0_PULSE0_VAL \
+ (AT91_SMC_PULSE_NWE(11) | AT91_SMC_PULSE_NCS_WR(11) | \
+ AT91_SMC_PULSE_NRD(11) | AT91_SMC_PULSE_NCS_RD(11))
+#define CONFIG_SYS_SMC0_CYCLE0_VAL \
+ (AT91_SMC_CYCLE_NWE(22) | AT91_SMC_CYCLE_NRD(22))
+#define CONFIG_SYS_SMC0_MODE0_VAL \
+ (AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | \
+ AT91_SMC_MODE_DBW_16 | \
+ AT91_SMC_MODE_TDF | AT91_SMC_MODE_TDF_CYCLE(6))
+
+/* NAND flash */
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_NAND_ATMEL
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_SYS_NAND_BASE 0x40000000
+#define CONFIG_SYS_NAND_DBW_8 1
+#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) /* our ALE is AD21 */
+#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) /* our CLE is AD22 */
+#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIO_PORTD, 15
+#define CONFIG_SYS_NAND_READY_PIN AT91_PIO_PORTB, 0
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
+#endif
+
+/* Ethernet */
+#define CONFIG_MACB
+#define CONFIG_RMII
+#define CONFIG_NET_MULTI
+#define CONFIG_NET_RETRY_COUNT 5
+
+#define CONFIG_OVERWRITE_ETHADDR_ONCE
+
+#define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */
+
+#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END 0x21e00000
+
+/* Address and size of Primary Environment Sector */
+#ifdef CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_SIZE 0x20000
+#else
+#define CONFIG_ENV_SIZE 0x2000
+#endif
+
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE {312500, 230400, 115200, 19200, \
+ 38400, 57600, 9600 }
+
+#define CONFIG_SYS_PROMPT "U-Boot> "
+#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
+#define CONFIG_SYS_MAXARGS 32 /* max number of command args */
+#define CONFIG_SYS_PBSIZE \
+ (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_AUTO_COMPLETE
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN \
+ ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000)
+#define CONFIG_SYS_GBL_DATA_SIZE 128 /* 128 bytes for initial data */
+
+#define CONFIG_STACKSIZE (32*1024) /* regular stack */
+
+#ifndef CONFIG_RAMLOAD
+#define CONFIG_BOOTCOMMAND "run nfsboot"
+#endif
+#define CONFIG_BOOT_RETRY_TIME -1
+#define CONFIG_BOOT_RETRY_MIN 15
+
+#define CONFIG_NFSBOOTCOMMAND \
+ "dhcp $(copy_addr) $(kernelname);" \
+ "run bootargsdefaults;" \
+ "set bootargs $(bootargs) boot=nfs " \
+ ";echo $(bootargs)" \
+ ";bootm"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "ubootaddr=10000000\0" \
+ "splashimage=10080000\0" \
+ "kerneladdr=100A0000\0" \
+ "kernelsize=00800000\0" \
+ "minifsaddr=108A0000\0" \
+ "minifssize=00060000\0" \
+ "rootfsaddr=10900000\0" \
+ "copy_addr=20200000\0" \
+ "rootfssize=01700000\0" \
+ "kernelname=uImage_vl_ma2sc\0" \
+ "bootargsdefaults=set bootargs " \
+ "console=ttyS0,115200 " \
+ "video=atmel_lcdfb " \
+ "mem=62M " \
+ "panic=10 " \
+ "boardrevison=\\\"${revision}\\\" " \
+ "uboot=\\\"${ver}\\\" " \
+ "\0" \
+ "update_all=run update_kernel;run update_root;" \
+ "run update_splash; run update_uboot\0" \
+ "update_kernel=protect off $(kerneladdr) +$(kernelsize);" \
+ "dhcp $(copy_addr) $(kernelname);" \
+ "erase $(kerneladdr) +$(kernelsize);" \
+ "cp.b $(fileaddr) $(kerneladdr) $(filesize);" \
+ "protect on $(kerneladdr) +$(kernelsize)" \
+ "\0" \
+ "update_root=protect off $(rootfsaddr) +$(rootfssize);" \
+ "dhcp $(copy_addr) vl_ma2sc.root;" \
+ "erase $(rootfsaddr) +$(rootfssize);" \
+ "cp.b $(fileaddr) $(rootfsaddr) $(filesize);" \
+ "\0" \
+ "update_splash=protect off $(splashimage) +20000;" \
+ "dhcp $(copy_addr) splash_vl_ma2sc.bmp;" \
+ "erase $(splashimage) +20000;" \
+ "cp.b $(fileaddr) 10080000 $(filesize);" \
+ "protect on $(splashimage) +20000\0" \
+ "update_uboot=protect off 10000000 1005FFFF;" \
+ "dhcp $(copy_addr) u-boot_vl_ma2sc;" \
+ "erase 10000000 1005FFFF;" \
+ "cp.b $(fileaddr) $(ubootaddr) $(filesize);" \
+ "protect on 10000000 1005FFFF;reset\0" \
+ "emergency=run bootargsdefaults;" \
+ "set bootargs $(bootargs) root=initramfs boot=emergency " \
+ ";bootm $(kerneladdr)\0" \
+ "netemergency=run bootargsdefaults;" \
+ "dhcp $(copy_addr) $(kernelname);" \
+ "set bootargs $(bootargs) root=initramfs boot=emergency " \
+ ";bootm $(copy_addr)\0" \
+ "norboot=run bootargsdefaults;" \
+ "set bootargs $(bootargs) root=initramfs boot=local quiet " \
+ ";bootm $(kerneladdr)\0" \
+ "nandboot=run bootargsdefaults;" \
+ "set bootargs $(bootargs) root=initramfs boot=nand " \
+ ";bootm $(kerneladdr)\0" \
+ "setnorboot=set bootcmd 'run norboot'; set bootdelay 1;save\0" \
+ "clearenv=protect off 10060000 1007FFFF;" \
+ "erase 10060000 1007FFFF;reset\0" \
+ " "
+
+/*--------------------------------------------------------------------------*/
+
+#ifdef CONFIG_USE_IRQ
+#error CONFIG_USE_IRQ not supported
+#endif
+
+#endif
diff --git a/include/configs/whistler.h b/include/configs/whistler.h
new file mode 100644
index 0000000..f2952d5
--- /dev/null
+++ b/include/configs/whistler.h
@@ -0,0 +1,94 @@
+/*
+ * (C) Copyright 2010-2012
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <asm/sizes.h>
+#include "tegra2-common.h"
+
+/* Enable fdt support for Whistler. Flash the image in u-boot-dtb.bin */
+#define CONFIG_DEFAULT_DEVICE_TREE tegra2-whistler
+#define CONFIG_OF_CONTROL
+#define CONFIG_OF_SEPARATE
+
+/* High-level configuration options */
+#define V_PROMPT "Tegra2 (Whistler) # "
+#define CONFIG_TEGRA2_BOARD_STRING "NVIDIA Whistler"
+
+/* Board-specific serial config */
+#define CONFIG_SERIAL_MULTI
+#define CONFIG_TEGRA2_ENABLE_UARTA
+#define CONFIG_TEGRA2_UARTA_UAA_UAB
+#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE
+
+#define CONFIG_MACH_TYPE MACH_TYPE_WHISTLER
+
+#define CONFIG_BOARD_EARLY_INIT_F
+
+/* I2C */
+#define CONFIG_TEGRA_I2C
+#define CONFIG_SYS_I2C_INIT_BOARD
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_SYS_MAX_I2C_BUS 4
+#define CONFIG_SYS_I2C_SPEED 100000
+#define CONFIG_CMD_I2C
+
+/* SD/MMC */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_TEGRA_MMC
+#define CONFIG_CMD_MMC
+
+#define CONFIG_DOS_PARTITION
+#define CONFIG_EFI_PARTITION
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+
+/*
+ * Environment in eMMC, at the end of 2nd "boot sector". Note: This assumes
+ * the user plugged the standard 8MB MoviNAND card into J29/HSMMC/POP. If
+ * they didn't, the boot sector layout may be different. However, use of that
+ * particular card is standard practice as far as I know.
+ */
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_ENV_OFFSET ((2 * 512 * 1024) - CONFIG_ENV_SIZE)
+#define CONFIG_SYS_MMC_ENV_DEV 0
+
+/* USB Host support */
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_TEGRA
+#define CONFIG_USB_STORAGE
+#define CONFIG_CMD_USB
+
+/* USB networking support */
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+
+/* General networking support */
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_DHCP
+
+#include "tegra2-common-post.h"
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/zipitz2.h b/include/configs/zipitz2.h
index a330bd0..8e63770 100644
--- a/include/configs/zipitz2.h
+++ b/include/configs/zipitz2.h
@@ -32,6 +32,7 @@
#undef CONFIG_BOARD_LATE_INIT
#undef CONFIG_USE_IRQ
#undef CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_PREBOOT
/*
* Environment settings
diff --git a/include/linux/mtd/fsmc_nand.h b/include/linux/mtd/fsmc_nand.h
new file mode 100644
index 0000000..3a61cea
--- /dev/null
+++ b/include/linux/mtd/fsmc_nand.h
@@ -0,0 +1,101 @@
+/*
+ * (C) Copyright 2010
+ * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __FSMC_NAND_H__
+#define __FSMC_NAND_H__
+
+#include <linux/mtd/nand.h>
+
+struct fsmc_regs {
+ u32 ctrl; /* 0x00 */
+ u8 reserved_1[0x40 - 0x04];
+ u32 pc; /* 0x40 */
+ u32 sts; /* 0x44 */
+ u32 comm; /* 0x48 */
+ u32 attrib; /* 0x4c */
+ u32 ioata; /* 0x50 */
+ u32 ecc1; /* 0x54 */
+ u32 ecc2; /* 0x58 */
+ u32 ecc3; /* 0x5c */
+ u8 reserved_2[0xfe0 - 0x60];
+ u32 peripid0; /* 0xfe0 */
+ u32 peripid1; /* 0xfe4 */
+ u32 peripid2; /* 0xfe8 */
+ u32 peripid3; /* 0xfec */
+ u32 pcellid0; /* 0xff0 */
+ u32 pcellid1; /* 0xff4 */
+ u32 pcellid2; /* 0xff8 */
+ u32 pcellid3; /* 0xffc */
+};
+
+/* ctrl register definitions */
+#define FSMC_WP (1 << 7)
+
+/* pc register definitions */
+#define FSMC_RESET (1 << 0)
+#define FSMC_WAITON (1 << 1)
+#define FSMC_ENABLE (1 << 2)
+#define FSMC_DEVTYPE_NAND (1 << 3)
+#define FSMC_DEVWID_8 (0 << 4)
+#define FSMC_DEVWID_16 (1 << 4)
+#define FSMC_ECCEN (1 << 6)
+#define FSMC_ECCPLEN_512 (0 << 7)
+#define FSMC_ECCPLEN_256 (1 << 7)
+#define FSMC_TCLR_1 (1 << 9)
+#define FSMC_TAR_1 (1 << 13)
+
+/* sts register definitions */
+#define FSMC_CODE_RDY (1 << 15)
+
+/* comm register definitions */
+#define FSMC_TSET_0 (0 << 0)
+#define FSMC_TWAIT_6 (6 << 8)
+#define FSMC_THOLD_4 (4 << 16)
+#define FSMC_THIZ_1 (1 << 24)
+
+/* peripid2 register definitions */
+#define FSMC_REVISION_MSK (0xf)
+#define FSMC_REVISION_SHFT (0x4)
+
+#define FSMC_VER8 0x8
+
+/*
+ * There are 13 bytes of ecc for every 512 byte block and it has to be read
+ * consecutively and immediately after the 512 byte data block for hardware to
+ * generate the error bit offsets
+ * Managing the ecc bytes in the following way is easier. This way is similar to
+ * oobfree structure maintained already in u-boot nand driver
+ */
+#define FSMC_MAX_ECCPLACE_ENTRIES 32
+
+struct fsmc_nand_eccplace {
+ u32 offset;
+ u32 length;
+};
+
+struct fsmc_eccplace {
+ struct fsmc_nand_eccplace eccplace[FSMC_MAX_ECCPLACE_ENTRIES];
+};
+
+extern int fsmc_nand_init(struct nand_chip *nand);
+#endif
diff --git a/include/linux/mtd/st_smi.h b/include/linux/mtd/st_smi.h
new file mode 100644
index 0000000..04f81ea
--- /dev/null
+++ b/include/linux/mtd/st_smi.h
@@ -0,0 +1,117 @@
+/*
+ * (C) Copyright 2009
+ * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef ST_SMI_H
+#define ST_SMI_H
+
+/* 0xF800.0000 . 0xFBFF.FFFF 64MB SMI (Serial Flash Mem) */
+/* 0xFC00.0000 . 0xFC1F.FFFF 2MB SMI (Serial Flash Reg.) */
+
+#define FLASH_START_ADDRESS CONFIG_SYS_FLASH_BASE
+#define FLASH_BANK_SIZE CONFIG_SYS_FLASH_BANK_SIZE
+
+#define SMIBANK0_BASE (FLASH_START_ADDRESS)
+#define SMIBANK1_BASE (SMIBANK0_BASE + FLASH_BANK_SIZE)
+#define SMIBANK2_BASE (SMIBANK1_BASE + FLASH_BANK_SIZE)
+#define SMIBANK3_BASE (SMIBANK2_BASE + FLASH_BANK_SIZE)
+
+#define BANK0 0
+#define BANK1 1
+#define BANK2 2
+#define BANK3 3
+
+struct smi_regs {
+ u32 smi_cr1;
+ u32 smi_cr2;
+ u32 smi_sr;
+ u32 smi_tr;
+ u32 smi_rr;
+};
+
+/* CONTROL REG 1 */
+#define BANK_EN 0x0000000F /* enables all banks */
+#define DSEL_TIME 0x00000060 /* Deselect time */
+#define PRESCAL5 0x00000500 /* AHB_CK prescaling value */
+#define PRESCALA 0x00000A00 /* AHB_CK prescaling value */
+#define PRESCAL3 0x00000300 /* AHB_CK prescaling value */
+#define PRESCAL4 0x00000400 /* AHB_CK prescaling value */
+#define SW_MODE 0x10000000 /* enables SW Mode */
+#define WB_MODE 0x20000000 /* Write Burst Mode */
+#define FAST_MODE 0x00008000 /* Fast Mode */
+#define HOLD1 0x00010000
+
+/* CONTROL REG 2 */
+#define RD_STATUS_REG 0x00000400 /* reads status reg */
+#define WE 0x00000800 /* Write Enable */
+#define BANK0_SEL 0x00000000 /* Select Banck0 */
+#define BANK1_SEL 0x00001000 /* Select Banck1 */
+#define BANK2_SEL 0x00002000 /* Select Banck2 */
+#define BANK3_SEL 0x00003000 /* Select Banck3 */
+#define BANKSEL_SHIFT 12
+#define SEND 0x00000080 /* Send data */
+#define TX_LEN_1 0x00000001 /* data length = 1 byte */
+#define TX_LEN_2 0x00000002 /* data length = 2 byte */
+#define TX_LEN_3 0x00000003 /* data length = 3 byte */
+#define TX_LEN_4 0x00000004 /* data length = 4 byte */
+#define RX_LEN_1 0x00000010 /* data length = 1 byte */
+#define RX_LEN_2 0x00000020 /* data length = 2 byte */
+#define RX_LEN_3 0x00000030 /* data length = 3 byte */
+#define RX_LEN_4 0x00000040 /* data length = 4 byte */
+#define TFIE 0x00000100 /* Tx Flag Interrupt Enable */
+#define WCIE 0x00000200 /* WCF Interrupt Enable */
+
+/* STATUS_REG */
+#define INT_WCF_CLR 0xFFFFFDFF /* clear: WCF clear */
+#define INT_TFF_CLR 0xFFFFFEFF /* clear: TFF clear */
+#define WIP_BIT 0x00000001 /* WIP Bit of SPI SR */
+#define WEL_BIT 0x00000002 /* WEL Bit of SPI SR */
+#define RSR 0x00000005 /* Read Status regiser */
+#define TFF 0x00000100 /* Transfer Finished FLag */
+#define WCF 0x00000200 /* Transfer Finished FLag */
+#define ERF1 0x00000400 /* Error Flag 1 */
+#define ERF2 0x00000800 /* Error Flag 2 */
+#define WM0 0x00001000 /* WM Bank 0 */
+#define WM1 0x00002000 /* WM Bank 1 */
+#define WM2 0x00004000 /* WM Bank 2 */
+#define WM3 0x00008000 /* WM Bank 3 */
+#define WM_SHIFT 12
+
+/* TR REG */
+#define READ_ID 0x0000009F /* Read Identification */
+#define BULK_ERASE 0x000000C7 /* BULK erase */
+#define SECTOR_ERASE 0x000000D8 /* SECTOR erase */
+#define WRITE_ENABLE 0x00000006 /* Wenable command to FLASH */
+
+struct flash_dev {
+ u32 density;
+ ulong size;
+ ushort sector_count;
+};
+
+#define SFLASH_PAGE_SIZE 0x100 /* flash page size */
+#define XFER_FINISH_TOUT 15 /* xfer finish timeout(in ms) */
+#define WMODE_TOUT 15 /* write enable timeout(in ms) */
+
+extern void smi_init(void);
+
+#endif
diff --git a/include/net.h b/include/net.h
index a092f29..6d2d6cd 100644
--- a/include/net.h
+++ b/include/net.h
@@ -122,6 +122,23 @@ extern int eth_setenv_enetaddr(char *name, const uchar *enetaddr);
extern int eth_getenv_enetaddr_by_index(const char *base_name, int index,
uchar *enetaddr);
+#ifdef CONFIG_RANDOM_MACADDR
+/*
+ * The u-boot policy does not allow hardcoded ethernet addresses. Under the
+ * following circumstances a random generated address is allowed:
+ * - in emergency cases, where you need a working network connection to set
+ * the ethernet address.
+ * Eg. you want a rescue boot and don't have a serial port to access the
+ * CLI to set environment variables.
+ *
+ * In these cases, we generate a random locally administered ethernet address.
+ *
+ * Args:
+ * enetaddr - returns 6 byte hardware address
+ */
+extern void eth_random_enetaddr(uchar *enetaddr);
+#endif
+
extern int usb_eth_initialize(bd_t *bi);
extern int eth_init(bd_t *bis); /* Initialize the device */
extern int eth_send(void *packet, int length); /* Send a packet */
diff --git a/include/netdev.h b/include/netdev.h
index 4724717..d1aaf0c 100644
--- a/include/netdev.h
+++ b/include/netdev.h
@@ -52,7 +52,7 @@ int calxedaxgmac_initialize(u32 id, ulong base_addr);
int cs8900_initialize(u8 dev_num, int base_addr);
int davinci_emac_initialize(void);
int dc21x4x_initialize(bd_t *bis);
-int designware_initialize(u32 id, ulong base_addr, u32 phy_addr);
+int designware_initialize(u32 id, ulong base_addr, u32 phy_addr, u32 interface);
int dm9000_initialize(bd_t *bis);
int dnet_eth_initialize(int id, void *regs, unsigned int phy_addr);
int e1000_initialize(bd_t *bis);