summaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
Diffstat (limited to 'include')
-rw-r--r--include/configs/omap1510.h756
-rw-r--r--include/configs/omap5912osk.h174
2 files changed, 0 insertions, 930 deletions
diff --git a/include/configs/omap1510.h b/include/configs/omap1510.h
deleted file mode 100644
index 5482722..0000000
--- a/include/configs/omap1510.h
+++ /dev/null
@@ -1,756 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- * OMAP hardware map
- *
- * Copyright (C) 2001 RidgeRun, Inc. (http://www.ridgerun.com)
- * Author: RidgeRun, Inc.
- * Greg Lonnon (glonnon@ridgerun.com) or info@ridgerun.com
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <linux/sizes.h>
-
-/*
- There are 2 sets of general I/O -->
- 1. GPIO (shared between ARM & DSP, configured by ARM)
- 2. MPUIO which can be used only by the ARM.
-
- Base address FFFB:5000 is where the ARM accesses the MPUIO control registers
- (see 7.2.2 of the TRM for MPUIO reg definitions).
-
- Base address E101:5000 is reserved for ARM access of the same MPUIO control
- regs, but via the DSP I/O map. This address is unavailable on 1510.
-
- Base address FFFC:E000 is where the ARM accesses the GPIO config registers
- directly via its own peripheral bus.
-
- Base address E101:E000 is where the ARM can access the same GPIO config
- registers, but the access takes place through the ARM port interface (called
- API or MPUI) via the DSP's peripheral bus (DSP I/O space).
-
- Therefore, the ARM should setup the GPIO regs thru the FFFC:E000 addresses
- instead of the E101:E000 addresses. The DSP has only read access of the pin
- control register, so this may explain the inability to write to E101:E018.
- Try accessing pin control reg at FFFC:E018.
- */
-#define OMAP1510_GPIO_BASE 0xfffce000
-#define OMAP1510_GPIO_START OMAP1510_GPIO_BASE
-#define OMAP1510_GPIO_SIZE SZ_4K
-
-#define OMAP1510_MCBSP1_BASE 0xE1011000
-#define OMAP1510_MCBSP1_SIZE SZ_4K
-#define OMAP1510_MCBSP1_START 0xE1011000
-
-#define OMAP1510_MCBSP2_BASE 0xFFFB1000
-
-#define OMAP1510_MCBSP3_BASE 0xE1017000
-#define OMAP1510_MCBSP3_SIZE SZ_4K
-#define OMAP1510_MCBSP3_START 0xE1017000
-
-/*
- * Where's the flush address (for flushing D and I cache?)
- */
-#define FLUSH_BASE 0xdf000000
-#define FLUSH_BASE_PHYS 0x00000000
-
-#ifndef __ASSEMBLER__
-
-#define PCIO_BASE 0
-
-/*
- * RAM definitions
- */
-#define MAPTOPHYS(a) ((unsigned long)(a) - PAGE_OFFSET)
-#define KERNTOPHYS(a) ((unsigned long)(&a))
-#define KERNEL_BASE (0x10008000)
-#endif
-
-/* macro to get at IO space when running virtually */
-#define IO_ADDRESS(x) ((x))
-
-/* ----------------------------------------------------------------------------
- * OMAP1510 system registers
- * ----------------------------------------------------------------------------
- */
-
-#define OMAP1510_UART1_BASE 0xfffb0000 /* "BLUETOOTH-UART" */
-#define OMAP1510_UART2_BASE 0xfffb0800 /* "MODEM-UART" */
-#define OMAP1510_RTC_BASE 0xfffb4800 /* RTC */
-#define OMAP1510_UART3_BASE 0xfffb9800 /* Shared MPU/DSP UART */
-#define OMAP1510_COM_MCBSP2_BASE 0xffff1000 /* Com McBSP2 */
-#define OMAP1510_AUDIO_MCBSP_BASE 0xffff1800 /* Audio McBSP2 */
-#define OMAP1510_ARMIO_BASE 0xfffb5000 /* keyboard/gpio */
-
-/*
- * OMAP1510 UART3 Registers
- */
-
-#define OMAP_MPU_UART3_BASE 0xFFFB9800 /* UART3 through MPU bus */
-
-/* UART3 Registers Maping through MPU bus */
-
-#define UART3_RHR (OMAP_MPU_UART3_BASE + 0)
-#define UART3_THR (OMAP_MPU_UART3_BASE + 0)
-#define UART3_DLL (OMAP_MPU_UART3_BASE + 0)
-#define UART3_IER (OMAP_MPU_UART3_BASE + 4)
-#define UART3_DLH (OMAP_MPU_UART3_BASE + 4)
-#define UART3_IIR (OMAP_MPU_UART3_BASE + 8)
-#define UART3_FCR (OMAP_MPU_UART3_BASE + 8)
-#define UART3_EFR (OMAP_MPU_UART3_BASE + 8)
-#define UART3_LCR (OMAP_MPU_UART3_BASE + 0x0C)
-#define UART3_MCR (OMAP_MPU_UART3_BASE + 0x10)
-#define UART3_XON1_ADDR1 (OMAP_MPU_UART3_BASE + 0x10)
-#define UART3_XON2_ADDR2 (OMAP_MPU_UART3_BASE + 0x14)
-#define UART3_LSR (OMAP_MPU_UART3_BASE + 0x14)
-#define UART3_TCR (OMAP_MPU_UART3_BASE + 0x18)
-#define UART3_MSR (OMAP_MPU_UART3_BASE + 0x18)
-#define UART3_XOFF1 (OMAP_MPU_UART3_BASE + 0x18)
-#define UART3_XOFF2 (OMAP_MPU_UART3_BASE + 0x1C)
-#define UART3_SPR (OMAP_MPU_UART3_BASE + 0x1C)
-#define UART3_TLR (OMAP_MPU_UART3_BASE + 0x1C)
-#define UART3_MDR1 (OMAP_MPU_UART3_BASE + 0x20)
-#define UART3_MDR2 (OMAP_MPU_UART3_BASE + 0x24)
-#define UART3_SFLSR (OMAP_MPU_UART3_BASE + 0x28)
-#define UART3_TXFLL (OMAP_MPU_UART3_BASE + 0x28)
-#define UART3_RESUME (OMAP_MPU_UART3_BASE + 0x2C)
-#define UART3_TXFLH (OMAP_MPU_UART3_BASE + 0x2C)
-#define UART3_SFREGL (OMAP_MPU_UART3_BASE + 0x30)
-#define UART3_RXFLL (OMAP_MPU_UART3_BASE + 0x30)
-#define UART3_SFREGH (OMAP_MPU_UART3_BASE + 0x34)
-#define UART3_RXFLH (OMAP_MPU_UART3_BASE + 0x34)
-#define UART3_BLR (OMAP_MPU_UART3_BASE + 0x38)
-#define UART3_ACREG (OMAP_MPU_UART3_BASE + 0x3C)
-#define UART3_DIV16 (OMAP_MPU_UART3_BASE + 0x3C)
-#define UART3_SCR (OMAP_MPU_UART3_BASE + 0x40)
-#define UART3_SSR (OMAP_MPU_UART3_BASE + 0x44)
-#define UART3_EBLR (OMAP_MPU_UART3_BASE + 0x48)
-#define UART3_OSC_12M_SEL (OMAP_MPU_UART3_BASE + 0x4C)
-#define UART3_MVR (OMAP_MPU_UART3_BASE + 0x50)
-
-/*
- * Configuration Registers
- */
-#define FUNC_MUX_CTRL_0 0xfffe1000
-#define FUNC_MUX_CTRL_1 0xfffe1004
-#define FUNC_MUX_CTRL_2 0xfffe1008
-#define COMP_MODE_CTRL_0 0xfffe100c
-#define FUNC_MUX_CTRL_3 0xfffe1010
-#define FUNC_MUX_CTRL_4 0xfffe1014
-#define FUNC_MUX_CTRL_5 0xfffe1018
-#define FUNC_MUX_CTRL_6 0xfffe101C
-#define FUNC_MUX_CTRL_7 0xfffe1020
-#define FUNC_MUX_CTRL_8 0xfffe1024
-#define FUNC_MUX_CTRL_9 0xfffe1028
-#define FUNC_MUX_CTRL_A 0xfffe102C
-#define FUNC_MUX_CTRL_B 0xfffe1030
-#define FUNC_MUX_CTRL_C 0xfffe1034
-#define FUNC_MUX_CTRL_D 0xfffe1038
-#define PULL_DWN_CTRL_0 0xfffe1040
-#define PULL_DWN_CTRL_1 0xfffe1044
-#define PULL_DWN_CTRL_2 0xfffe1048
-#define PULL_DWN_CTRL_3 0xfffe104c
-#define GATE_INH_CTRL_0 0xfffe1050
-#define VOLTAGE_CTRL_0 0xfffe1060
-#define TEST_DBG_CTRL_0 0xfffe1070
-
-#define MOD_CONF_CTRL_0 0xfffe1080
-
-#ifdef CONFIG_OMAP1610 /* 1610 Configuration Register */
-
-#define USB_OTG_CTRL 0xFFFB040C
-#define USB_TRANSCEIVER_CTRL 0xFFFE1064
-#define PULL_DWN_CTRL_4 0xFFFE10AC
-#define PU_PD_SEL_0 0xFFFE10B4
-#define PU_PD_SEL_1 0xFFFE10B8
-#define PU_PD_SEL_2 0xFFFE10BC
-#define PU_PD_SEL_3 0xFFFE10C0
-#define PU_PD_SEL_4 0xFFFE10C4
-
-#endif
-/*
- * Traffic Controller Memory Interface Registers
- */
-#define TCMIF_BASE 0xfffecc00
-#define IMIF_PRIO (TCMIF_BASE + 0x00)
-#define EMIFS_PRIO_REG (TCMIF_BASE + 0x04)
-#define EMIFF_PRIO_REG (TCMIF_BASE + 0x08)
-#define EMIFS_CONFIG_REG (TCMIF_BASE + 0x0c)
-#define EMIFS_CS0_CONFIG (TCMIF_BASE + 0x10)
-#define EMIFS_CS1_CONFIG (TCMIF_BASE + 0x14)
-#define EMIFS_CS2_CONFIG (TCMIF_BASE + 0x18)
-#define EMIFS_CS3_CONFIG (TCMIF_BASE + 0x1c)
-#define EMIFF_SDRAM_CONFIG (TCMIF_BASE + 0x20)
-#define EMIFF_MRS (TCMIF_BASE + 0x24)
-#define TC_TIMEOUT1 (TCMIF_BASE + 0x28)
-#define TC_TIMEOUT2 (TCMIF_BASE + 0x2c)
-#define TC_TIMEOUT3 (TCMIF_BASE + 0x30)
-#define TC_ENDIANISM (TCMIF_BASE + 0x34)
-#define EMIFF_SDRAM_CONFIG_2 (TCMIF_BASE + 0x3c)
-#define EMIF_CFG_DYNAMIC_WS (TCMIF_BASE + 0x40)
-
-/*
- * LCD Panel
- */
-#define TI925_LCD_BASE 0xFFFEC000
-#define TI925_LCD_CONTROL (TI925_LCD_BASE)
-#define TI925_LCD_TIMING0 (TI925_LCD_BASE+0x4)
-#define TI925_LCD_TIMING1 (TI925_LCD_BASE+0x8)
-#define TI925_LCD_TIMING2 (TI925_LCD_BASE+0xc)
-#define TI925_LCD_STATUS (TI925_LCD_BASE+0x10)
-#define TI925_LCD_SUBPANEL (TI925_LCD_BASE+0x14)
-
-#define OMAP_LCD_CONTROL TI925_LCD_CONTROL
-
-/* I2C Registers */
-
-#define I2C_BASE 0xfffb3800
-
-#define I2C_REV (I2C_BASE + 0x00)
-#define I2C_IE (I2C_BASE + 0x04)
-#define I2C_STAT (I2C_BASE + 0x08)
-#define I2C_IV (I2C_BASE + 0x0c)
-#define I2C_BUF (I2C_BASE + 0x14)
-#define I2C_CNT (I2C_BASE + 0x18)
-#define I2C_DATA (I2C_BASE + 0x1c)
-#define I2C_CON (I2C_BASE + 0x24)
-#define I2C_OA (I2C_BASE + 0x28)
-#define I2C_SA (I2C_BASE + 0x2c)
-#define I2C_PSC (I2C_BASE + 0x30)
-#define I2C_SCLL (I2C_BASE + 0x34)
-#define I2C_SCLH (I2C_BASE + 0x38)
-#define I2C_SYSTEST (I2C_BASE + 0x3c)
-
-/* I2C masks */
-
-/* I2C Interrupt Enable Register (I2C_IE): */
-
-#define I2C_IE_XRDY_IE (1 << 4) /* Transmit data ready interrupt enable */
-#define I2C_IE_RRDY_IE (1 << 3) /* Receive data ready interrupt enable */
-#define I2C_IE_ARDY_IE (1 << 2) /* Register access ready interrupt enable */
-#define I2C_IE_NACK_IE (1 << 1) /* No acknowledgment interrupt enable */
-#define I2C_IE_AL_IE (1 << 0) /* Arbitration lost interrupt enable */
-
-/* I2C Status Register (I2C_STAT): */
-
-#define I2C_STAT_SBD (1 << 15) /* Single byte data */
-#define I2C_STAT_BB (1 << 12) /* Bus busy */
-#define I2C_STAT_ROVR (1 << 11) /* Receive overrun */
-#define I2C_STAT_XUDF (1 << 10) /* Transmit underflow */
-#define I2C_STAT_AAS (1 << 9) /* Address as slave */
-#define I2C_STAT_AD0 (1 << 8) /* Address zero */
-#define I2C_STAT_XRDY (1 << 4) /* Transmit data ready */
-#define I2C_STAT_RRDY (1 << 3) /* Receive data ready */
-#define I2C_STAT_ARDY (1 << 2) /* Register access ready */
-#define I2C_STAT_NACK (1 << 1) /* No acknowledgment interrupt enable */
-#define I2C_STAT_AL (1 << 0) /* Arbitration lost interrupt enable */
-
-/* I2C Interrupt Vector Register (I2C_IV): */
-
-/* I2C Interrupt Code Register (I2C_INTCODE): */
-
-#define I2C_INTCODE_MASK 7
-#define I2C_INTCODE_NONE 0
-#define I2C_INTCODE_AL 1 /* Arbitration lost */
-#define I2C_INTCODE_NAK 2 /* No acknowledgement/general call */
-#define I2C_INTCODE_ARDY 3 /* Register access ready */
-#define I2C_INTCODE_RRDY 4 /* Rcv data ready */
-#define I2C_INTCODE_XRDY 5 /* Xmit data ready */
-
-/* I2C Buffer Configuration Register (I2C_BUF): */
-
-#define I2C_BUF_RDMA_EN (1 << 15) /* Receive DMA channel enable */
-#define I2C_BUF_XDMA_EN (1 << 7) /* Transmit DMA channel enable */
-
-/* I2C Configuration Register (I2C_CON): */
-
-#define I2C_CON_EN (1 << 15) /* I2C module enable */
-#define I2C_CON_BE (1 << 14) /* Big endian mode */
-#define I2C_CON_STB (1 << 11) /* Start byte mode (master mode only) */
-#define I2C_CON_MST (1 << 10) /* Master/slave mode */
-#define I2C_CON_TRX (1 << 9) /* Transmitter/receiver mode (master mode only) */
-#define I2C_CON_XA (1 << 8) /* Expand address */
-#define I2C_CON_RM (1 << 2) /* Repeat mode (master mode only) */
-#define I2C_CON_STP (1 << 1) /* Stop condition (master mode only) */
-#define I2C_CON_STT (1 << 0) /* Start condition (master mode only) */
-
-/* I2C System Test Register (I2C_SYSTEST): */
-
-#define I2C_SYSTEST_ST_EN (1 << 15) /* System test enable */
-#define I2C_SYSTEST_FREE (1 << 14) /* Free running mode (on breakpoint) */
-#define I2C_SYSTEST_TMODE_MASK (3 << 12) /* Test mode select */
-#define I2C_SYSTEST_TMODE_SHIFT (12) /* Test mode select */
-#define I2C_SYSTEST_SCL_I (1 << 3) /* SCL line sense input value */
-#define I2C_SYSTEST_SCL_O (1 << 2) /* SCL line drive output value */
-#define I2C_SYSTEST_SDA_I (1 << 1) /* SDA line sense input value */
-#define I2C_SYSTEST_SDA_O (1 << 0) /* SDA line drive output value */
-
-/*
- * MMC/SD Host Controller Registers
- */
-
-#define OMAP_MMC_CMD 0xFFFB7800 /* MMC Command */
-#define OMAP_MMC_ARGL 0xFFFB7804 /* MMC argument low */
-#define OMAP_MMC_ARGH 0xFFFB7808 /* MMC argument high */
-#define OMAP_MMC_CON 0xFFFB780C /* MMC system configuration */
-#define OMAP_MMC_STAT 0xFFFB7810 /* MMC status */
-#define OMAP_MMC_IE 0xFFFB7814 /* MMC system interrupt enable */
-#define OMAP_MMC_CTO 0xFFFB7818 /* MMC command time-out */
-#define OMAP_MMC_DTO 0xFFFB781C /* MMC data time-out */
-#define OMAP_MMC_DATA 0xFFFB7820 /* MMC TX/RX FIFO data */
-#define OMAP_MMC_BLEN 0xFFFB7824 /* MMC block length */
-#define OMAP_MMC_NBLK 0xFFFB7828 /* MMC number of blocks */
-#define OMAP_MMC_BUF 0xFFFB782C /* MMC buffer configuration */
-#define OMAP_MMC_SPI 0xFFFB7830 /* MMC serial port interface */
-#define OMAP_MMC_SDIO 0xFFFB7834 /* MMC SDIO mode configuration */
-#define OMAP_MMC_SYST 0xFFFB7838 /* MMC system test */
-#define OMAP_MMC_REV 0xFFFB783C /* MMC module version */
-#define OMAP_MMC_RSP0 0xFFFB7840 /* MMC command response 0 */
-#define OMAP_MMC_RSP1 0xFFFB7844 /* MMC command response 1 */
-#define OMAP_MMC_RSP2 0xFFFB7848 /* MMC command response 2 */
-#define OMAP_MMC_RSP3 0xFFFB784C /* MMC command response 3 */
-#define OMAP_MMC_RSP4 0xFFFB7850 /* MMC command response 4 */
-#define OMAP_MMC_RSP5 0xFFFB7854 /* MMC command response 5 */
-#define OMAP_MMC_RSP6 0xFFFB7858 /* MMC command response 6 */
-#define OMAP_MMC_RSP7 0xFFFB785C /* MMC command response 4 */
-
-/* MMC masks */
-
-#define OMAP_MMC_END_OF_CMD (1 << 0) /* End of command phase */
-#define OMAP_MMC_CARD_BUSY (1 << 2) /* Card enter busy state */
-#define OMAP_MMC_BLOCK_RS (1 << 3) /* Block received/sent */
-#define OMAP_MMC_EOF_BUSY (1 << 4) /* Card exit busy state */
-#define OMAP_MMC_DATA_TIMEOUT (1 << 5) /* Data response time-out */
-#define OMAP_MMC_DATA_CRC (1 << 6) /* Date CRC error */
-#define OMAP_MMC_CMD_TIMEOUT (1 << 7) /* Command response time-out */
-#define OMAP_MMC_CMD_CRC (1 << 8) /* Command CRC error */
-#define OMAP_MMC_A_FULL (1 << 10) /* Buffer almost full */
-#define OMAP_MMC_A_EMPTY (1 << 11) /* Buffer almost empty */
-#define OMAP_MMC_OCR_BUSY (1 << 12) /* OCR busy */
-#define OMAP_MMC_CARD_IRQ (1 << 13) /* Card IRQ received */
-#define OMAP_MMC_CARD_ERR (1 << 14) /* Card status error in response */
-
-/* 2.9.2 MPUI Interface Registers FFFE:C900 */
-
-#define MPUI_CTRL_REG (volatile __u32 *)(0xfffec900)
-#define MPUI_DEBUG_ADDR (volatile __u32 *)(0xfffec904)
-#define MPUI_DEBUG_DATA (volatile __u32 *)(0xfffec908)
-#define MPUI_DEBUG_FLAG (volatile __u16 *)(0xfffec90c)
-#define MPUI_STATUS_REG (volatile __u16 *)(0xfffec910)
-#define MPUI_DSP_STATUS_REG (volatile __u16 *)(0xfffec914)
-#define MPUI_DSP_BOOT_CONFIG (volatile __u16 *)(0xfffec918)
-#define MPUI_DSP_API_CONFIG (volatile __u16 *)(0xfffec91c)
-
-/* 2.9.6 Traffic Controller Memory Interface Registers: */
-#define OMAP_IMIF_PRIO_REG 0xfffecc00
-#define OMAP_EMIFS_PRIO_REG 0xfffecc04
-#define OMAP_EMIFF_PRIO_REG 0xfffecc08
-#define OMAP_EMIFS_CONFIG_REG 0xfffecc0c
-#define OMAP_EMIFS_CS0_CONFIG 0xfffecc10
-#define OMAP_EMIFS_CS1_CONFIG 0xfffecc14
-#define OMAP_EMIFS_CS2_CONFIG 0xfffecc18
-#define OMAP_EMIFS_CS3_CONFIG 0xfffecc1c
-#define OMAP_EMIFF_SDRAM_CONFIG 0xfffecc20
-#define OMAP_EMIFF_MRS 0xfffecc24
-#define OMAP_TIMEOUT1 0xfffecc28
-#define OMAP_TIMEOUT2 0xfffecc2c
-#define OMAP_TIMEOUT3 0xfffecc30
-#define OMAP_ENDIANISM 0xfffecc34
-
-/* 2.9.10 EMIF Slow Interface Configuration Register (EMIFS_CONFIG_REG): */
-#define OMAP_EMIFS_CONFIG_FR (1 << 4)
-#define OMAP_EMIFS_CONFIG_PDE (1 << 3)
-#define OMAP_EMIFS_CONFIG_PWD_EN (1 << 2)
-#define OMAP_EMIFS_CONFIG_BM (1 << 1)
-#define OMAP_EMIFS_CONFIG_WP (1 << 0)
-
-/*
- * Memory chunk set aside for the Framebuffer in SRAM
- */
-#define SRAM_FRAMEBUFFER_MEMORY OMAP1510_SRAM_BASE
-
-
-/*
- * DMA
- */
-
-#define OMAP1510_DMA_BASE 0xFFFED800
-#define OMAP_DMA_BASE OMAP1510_DMA_BASE
-
-/* Global Register selection */
-#define NO_GLOBAL_DMA_ACCESS 0
-
-/* Channel select field
- * NOTE: all other channels are linear, chan0 is 0, chan1 is 1, etc...
- */
-#define LCD_CHANNEL 0xc
-
-/* Register Select Field (LCD) */
-#define DMA_LCD_CTRL 0
-#define DMA_LCD_TOP_F1_L 1
-#define DMA_LCD_TOP_F1_U 2
-#define DMA_LCD_BOT_F1_L 3
-#define DMA_LCD_BOT_F1_U 4
-
-#define LCD_FRAME_MODE (1<<0)
-#define LCD_FRAME_IT_IE (1<<1)
-#define LCD_BUS_ERROR_IT_IE (1<<2)
-#define LCD_FRAME_1_IT_COND (1<<3)
-#define LCD_FRAME_2_IT_COND (1<<4)
-#define LCD_BUS_ERROR_IT_COND (1<<5)
-#define LCD_SOURCE_IMIF (1<<6)
-
-/*
- * Real-Time Clock
- */
-
-#define RTC_SECONDS (volatile __u8 *)(OMAP1510_RTC_BASE + 0x00)
-#define RTC_MINUTES (volatile __u8 *)(OMAP1510_RTC_BASE + 0x04)
-#define RTC_HOURS (volatile __u8 *)(OMAP1510_RTC_BASE + 0x08)
-#define RTC_DAYS (volatile __u8 *)(OMAP1510_RTC_BASE + 0x0C)
-#define RTC_MONTHS (volatile __u8 *)(OMAP1510_RTC_BASE + 0x10)
-#define RTC_YEARS (volatile __u8 *)(OMAP1510_RTC_BASE + 0x14)
-#define RTC_CTRL (volatile __u8 *)(OMAP1510_RTC_BASE + 0x40)
-
-
-/* ---------------------------------------------------------------------------
- * OMAP1510 Interrupt Handlers
- * ---------------------------------------------------------------------------
- *
- */
-#define OMAP_IH1_BASE 0xfffecb00
-#define OMAP_IH2_BASE 0xfffe0000
-#define OMAP1510_ITR 0x0
-#define OMAP1510_MASK 0x4
-
-#define INTERRUPT_HANDLER_BASE OMAP_IH1_BASE
-#define INTERRUPT_INPUT_REGISTER OMAP1510_ITR
-#define INTERRUPT_MASK_REGISTER OMAP1510_MASK
-
-
-/* ---------------------------------------------------------------------------
- * OMAP1510 TIMERS
- * ---------------------------------------------------------------------------
- *
- */
-
-#define OMAP1510_32kHz_TIMER_BASE 0xfffb9000
-
-/* 32k Timer Registers */
-#define TIMER32k_CR 0x08
-#define TIMER32k_TVR 0x00
-#define TIMER32k_TCR 0x04
-
-/* 32k Timer Control Register definition */
-#define TIMER32k_TSS (1<<0)
-#define TIMER32k_TRB (1<<1)
-#define TIMER32k_INT (1<<2)
-#define TIMER32k_ARL (1<<3)
-
-/* MPU Timer base addresses */
-#define OMAP1510_MPUTIMER_BASE 0xfffec500
-#define OMAP1510_MPUTIMER_OFF 0x00000100
-
-#define OMAP1510_TIMER1_BASE 0xfffec500
-#define OMAP1510_TIMER2_BASE 0xfffec600
-#define OMAP1510_TIMER3_BASE 0xfffec700
-
-/* MPU Timer Registers */
-#define CNTL_TIMER 0
-#define LOAD_TIM 4
-#define READ_TIM 8
-
-/* CNTL_TIMER register bits */
-#define MPUTIM_FREE (1<<6)
-#define MPUTIM_CLOCK_ENABLE (1<<5)
-#define MPUTIM_PTV_MASK (0x7<<MPUTIM_PTV_BIT)
-#define MPUTIM_PTV_BIT 2
-#define MPUTIM_AR (1<<1)
-#define MPUTIM_ST (1<<0)
-
-/* ---------------------------------------------------------------------------
- * OMAP1510 GPIO (SHARED)
- * ---------------------------------------------------------------------------
- *
- */
-#define GPIO_DATA_INPUT_REG (OMAP1510_GPIO_BASE + 0x0)
-#define GPIO_DATA_OUTPUT_REG (OMAP1510_GPIO_BASE + 0x4)
-#define GPIO_DIR_CONTROL_REG (OMAP1510_GPIO_BASE + 0x8)
-#define GPIO_INT_CONTROL_REG (OMAP1510_GPIO_BASE + 0xc)
-#define GPIO_INT_MASK_REG (OMAP1510_GPIO_BASE + 0x10)
-#define GPIO_INT_STATUS_REG (OMAP1510_GPIO_BASE + 0x14)
-#define GPIO_PIN_CONTROL_REG (OMAP1510_GPIO_BASE + 0x18)
-
-
-/* ---------------------------
- * OMAP1510 MPUIO (ARM only)
- *----------------------------
- */
-#define OMAP1510_MPUIO_BASE 0xFFFB5000
-#define MPUIO_DATA_INPUT_REG (OMAP1510_MPUIO_BASE + 0x0)
-#define MPUIO_DATA_OUTPUT_REG (OMAP1510_MPUIO_BASE + 0x4)
-#define MPUIO_DIR_CONTROL_REG (OMAP1510_MPUIO_BASE + 0x8)
-
-/* ---------------------------------------------------------------------------
- * OMAP1510 TIPB (only)
- * ---------------------------------------------------------------------------
- *
- */
-#define TIPB_PUBLIC_CNTL_BASE 0xfffed300
-#define MPU_PUBLIC_TIPB_CNTL_REG (TIPB_PUBLIC_CNTL_BASE + 0x8)
-#define TIPB_PRIVATE_CNTL_BASE 0xfffeca00
-#define MPU_PRIVATE_TIPB_CNTL_REG (TIPB_PRIVATE_CNTL_BASE + 0x8)
-
-/*
- * ---------------------------------------------------------------------------
- * OMAP1510 Camera Interface
- * ---------------------------------------------------------------------------
- */
-#define CAMERA_BASE (IO_BASE + 0x6800)
-#define CAM_CTRLCLOCK_REG (CAMERA_BASE + 0x00)
-#define CAM_IT_STATUS_REG (CAMERA_BASE + 0x04)
-#define CAM_MODE_REG (CAMERA_BASE + 0x08)
-#define CAM_STATUS_REG (CAMERA_BASE + 0x0C)
-#define CAM_CAMDATA_REG (CAMERA_BASE + 0x10)
-#define CAM_GPIO_REG (CAMERA_BASE + 0x14)
-#define CAM_PEAK_CTR_REG (CAMERA_BASE + 0x18)
-
-#if 0
-#ifndef __ASSEMBLY__
-typedef struct {
- __u32 ctrlclock;
- __u32 it_status;
- __u32 mode;
- __u32 status;
- __u32 camdata;
- __u32 gpio;
- __u32 peak_counter;
-} camera_regs_t;
-#endif
-#endif
-
-/* CTRLCLOCK bit shifts */
-#define FOSCMOD_BIT 0
-#define FOSCMOD_MASK (0x7 << FOSCMOD_BIT)
-#define FOSCMOD_12MHz 0x0
-#define FOSCMOD_6MHz 0x2
-#define FOSCMOD_9_6MHz 0x4
-#define FOSCMOD_24MHz 0x5
-#define FOSCMOD_8MHz 0x6
-#define POLCLK (1<<3)
-#define CAMEXCLK_EN (1<<4)
-#define MCLK_EN (1<<5)
-#define DPLL_EN (1<<6)
-#define LCLK_EN (1<<7)
-
-/* IT_STATUS bit shifts */
-#define V_UP (1<<0)
-#define V_DOWN (1<<1)
-#define H_UP (1<<2)
-#define H_DOWN (1<<3)
-#define FIFO_FULL (1<<4)
-#define DATA_XFER (1<<5)
-
-/* MODE bit shifts */
-#define CAMOSC (1<<0)
-#define IMGSIZE_BIT 1
-#define IMGSIZE_MASK (0x3 << IMGSIZE_BIT)
-#define IMGSIZE_CIF (0x0 << IMGSIZE_BIT) /* 352x288 */
-#define IMGSIZE_QCIF (0x1 << IMGSIZE_BIT) /* 176x144 */
-#define IMGSIZE_VGA (0x2 << IMGSIZE_BIT) /* 640x480 */
-#define IMGSIZE_QVGA (0x3 << IMGSIZE_BIT) /* 320x240 */
-#define ORDERCAMD (1<<3)
-#define EN_V_UP (1<<4)
-#define EN_V_DOWN (1<<5)
-#define EN_H_UP (1<<6)
-#define EN_H_DOWN (1<<7)
-#define EN_DMA (1<<8)
-#define THRESHOLD (1<<9)
-#define THRESHOLD_BIT 9
-#define THRESHOLD_MASK (0x7f<<9)
-#define EN_NIRQ (1<<16)
-#define EN_FIFO_FULL (1<<17)
-#define RAZ_FIFO (1<<18)
-
-/* STATUS bit shifts */
-#define VSTATUS (1<<0)
-#define HSTATUS (1<<1)
-
-/* GPIO bit shifts */
-#define CAM_RST (1<<0)
-
-
-/*********************
- * Watchdog timer.
- *********************/
-#define WDTIM_BASE 0xfffec800
-#define WDTIM_CONTROL (WDTIM_BASE+0x00)
-#define WDTIM_LOAD (WDTIM_BASE+0x04)
-#define WDTIM_READ (WDTIM_BASE+0x04)
-#define WDTIM_MODE (WDTIM_BASE+0x08)
-
-/* Values to write to mode register to disable the watchdog function. */
-#define DISABLE_SEQ1 0xF5
-#define DISABLE_SEQ2 0xA0
-
-/* WDTIM_CONTROL bit definitions. */
-#define WDTIM_CONTROL_ST BIT7
-
-
-/* ---------------------------------------------------------------------------
- * Differentiating processor versions for those who care.
- * ---------------------------------------------------------------------------
- *
- */
-#define OMAP1509 0
-#define OMAP1510 1
-
-#define OMAP1510_ID_CODE_REG 0xfffed404
-
-#ifndef __ASSEMBLY__
-int cpu_type(void);
-#endif
-
-/*****************************************************************************/
-
-#define CLKGEN_RESET_BASE (0xfffece00)
-#define ARM_CKCTL (volatile __u16 *)(CLKGEN_RESET_BASE + 0x0)
-#define ARM_IDLECT1 (volatile __u16 *)(CLKGEN_RESET_BASE + 0x4)
-#define ARM_IDLECT2 (volatile __u16 *)(CLKGEN_RESET_BASE + 0x8)
-#define ARM_EWUPCT (volatile __u16 *)(CLKGEN_RESET_BASE + 0xC)
-#define ARM_RSTCT1 (volatile __u16 *)(CLKGEN_RESET_BASE + 0x10)
-#define ARM_RSTCT2 (volatile __u16 *)(CLKGEN_RESET_BASE + 0x14)
-#define ARM_SYSST (volatile __u16 *)(CLKGEN_RESET_BASE + 0x18)
-
-
-#define CK_CLKIN 12 /* MHz */
-#define CK_RATEF 1
-#define CK_IDLEF 2
-#define CK_ENABLEF 4
-#define CK_SELECTF 8
-#ifndef __ASSEMBLER__
-#define CK_DPLL1 ((volatile __u16 *)0xfffecf00)
-#else
-#define CK_DPLL1 (0xfffecf00)
-#endif
-#define SETARM_IDLE_SHIFT
-
-/* ARM_CKCTL bit shifts */
-#define PERDIV 0
-#define LCDDIV 2
-#define ARMDIV 4
-#define DSPDIV 6
-#define TCDIV 8
-#define DSPMMUDIV 10
-#define ARM_TIMXO 12
-#define EN_DSPCK 13
-#define ARM_INTHCK_SEL 14 /* REVISIT -- where is this used? */
-
-#define ARM_CKCTL_RSRVD_BIT15 (1 << 15)
-#define ARM_CKCTL_ARM_INTHCK_SEL (1 << 14)
-#define ARM_CKCTL_EN_DSPCK (1 << 13)
-#define ARM_CKCTL_ARM_TIMXO (1 << 12)
-#define ARM_CKCTL_DSPMMU_DIV1 (1 << 11)
-#define ARM_CKCTL_DSPMMU_DIV2 (1 << 10)
-#define ARM_CKCTL_TCDIV1 (1 << 9)
-#define ARM_CKCTL_TCDIV2 (1 << 8)
-#define ARM_CKCTL_DSPDIV1 (1 << 7)
-#define ARM_CKCTL_DSPDIV0 (1 << 6)
-#define ARM_CKCTL_ARMDIV1 (1 << 5)
-#define ARM_CKCTL_ARMDIV0 (1 << 4)
-#define ARM_CKCTL_LCDDIV1 (1 << 3)
-#define ARM_CKCTL_LCDDIV0 (1 << 2)
-#define ARM_CKCTL_PERDIV1 (1 << 1)
-#define ARM_CKCTL_PERDIV0 (1 << 0)
-
-/* ARM_IDLECT1 bit shifts */
-#define IDLWDT_ARM 0
-#define IDLXORP_ARM 1
-#define IDLPER_ARM 2
-#define IDLLCD_ARM 3
-#define IDLLB_ARM 4
-#define IDLHSAB_ARM 5
-#define IDLIF_ARM 6
-#define IDLDPLL_ARM 7
-#define IDLAPI_ARM 8
-#define IDLTIM_ARM 9
-#define SETARM_IDLE 11
-
-/* ARM_IDLECT2 bit shifts */
-#define EN_WDTCK 0
-#define EN_XORPCK 1
-#define EN_PERCK 2
-#define EN_LCDCK 3
-#define EN_LBCK 4
-#define EN_HSABCK 5
-#define EN_APICK 6
-#define EN_TIMCK 7
-#define DMACK_REQ 8
-#define EN_GPIOCK 9
-#define EN_LBFREECK 10
-
-#define ARM_RSTCT1_SW_RST (1 << 3)
-#define ARM_RSTCT1_DSP_RST (1 << 2)
-#define ARM_RSTCT1_DSP_EN (1 << 1)
-#define ARM_RSTCT1_ARM_RST (1 << 0)
-
-/* ARM_RSTCT2 bit shifts */
-#define EN_PER 0
-
-#define ARM_SYSST_RSRVD_BIT15 (1 << 15)
-#define ARM_SYSST_RSRVD_BIT14 (1 << 14)
-#define ARM_SYSST_CLOCK_SELECT2 (1 << 13)
-#define ARM_SYSST_CLOCK_SELECT1 (1 << 12)
-#define ARM_SYSST_CLOCK_SELECT0 (1 << 11)
-#define ARM_SYSST_RSRVD_BIT10 (1 << 10)
-#define ARM_SYSST_RSRVD_BIT9 (1 << 9)
-#define ARM_SYSST_RSRVD_BIT8 (1 << 8)
-#define ARM_SYSST_RSRVD_BIT7 (1 << 7)
-#define ARM_SYSST_IDLE_DSP (1 << 6)
-#define ARM_SYSST_POR (1 << 5)
-#define ARM_SYSST_EXT_RST (1 << 4)
-#define ARM_SYSST_ARM_MCRST (1 << 3)
-#define ARM_SYSST_ARM_WDRST (1 << 2)
-#define ARM_SYSST_GLOB_SWRST (1 << 1)
-#define ARM_SYSST_DSP_WDRST (1 << 0)
-
-/* Table 15-23. DPLL Control Registers: */
-#define DPLL_CTL_REG (volatile __u16 *)(0xfffecf00)
-
-/* Table 15-24. Control Register (CTL_REG): */
-
-#define DPLL_CTL_REG_IOB (1 << 13)
-#define DPLL_CTL_REG_PLL_MULT Fld(5,0)
-
-/*****************************************************************************/
-
-/* OMAP INTERRUPT REGISTERS */
-#define IRQ_ITR 0x00
-#define IRQ_MIR 0x04
-#define IRQ_SIR_IRQ 0x10
-#define IRQ_SIR_FIQ 0x14
-#define IRQ_CONTROL_REG 0x18
-#define IRQ_ISR 0x9c
-#define IRQ_ILR0 0x1c
-
-#define REG_IHL1_MIR (OMAP_IH1_BASE+IRQ_MIR)
-#define REG_IHL2_MIR (OMAP_IH2_BASE+IRQ_MIR)
-
-/* INTERRUPT LEVEL REGISTER BITS */
-#define ILR_PRIORITY_MASK (0x3c)
-#define ILR_PRIORITY_SHIFT (2)
-#define ILR_LEVEL_TRIGGER (1<<1)
-#define ILR_FIQ (1<<0)
-
-#define IRQ_LEVEL_INT 1
-#define IRQ_EDGE_INT 0
-
-/* Macros to access registers */
-#define outb(v,p) *(volatile u8 *) (p) = v
-#define outw(v,p) *(volatile u16 *) (p) = v
-#define outl(v,p) *(volatile u32 *) (p) = v
-
-#define inb(p) *(volatile u8 *) (p)
-#define inw(p) *(volatile u16 *) (p)
-#define inl(p) *(volatile u32 *) (p)
diff --git a/include/configs/omap5912osk.h b/include/configs/omap5912osk.h
deleted file mode 100644
index 376dfdb..0000000
--- a/include/configs/omap5912osk.h
+++ /dev/null
@@ -1,174 +0,0 @@
-/*
- * (C) Copyright 2003
- * Texas Instruments.
- * Kshitij Gupta <kshitij@ti.com>
- * Configuation settings for the TI OMAP Innovator board.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_ARM926EJS 1 /* This is an arm926ejs CPU core */
-#define CONFIG_OMAP 1 /* in a TI OMAP core */
-#define CONFIG_OMAP1610 1 /* 5912 is same as 1610 */
-#define CONFIG_OSK_OMAP5912 1 /* a OSK Board */
-
-#define CONFIG_DISPLAY_CPUINFO 1 /* display cpu info (and speed) */
-#define CONFIG_DISPLAY_BOARDINFO 1 /* display board info */
-
-/* input clock of PLL */
-/* the OMAP5912 OSK has 12MHz input clock */
-#define CONFIG_SYS_CLK_FREQ 12000000
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1 /* Required for ramdisk support */
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-/*
- * Hardware drivers
- */
-/*
-*/
-#define CONFIG_LAN91C96
-#define CONFIG_LAN91C96_BASE 0x04800300
-#define CONFIG_LAN91C96_EXT_PHY
-
-/*
- * NS16550 Configuration
- */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE (-4)
-#define CONFIG_SYS_NS16550_CLK (48000000) /* can be 12M/32Khz or 48Mhz */
-#define CONFIG_SYS_NS16550_COM1 0xfffb0000 /* uart1, bluetooth uart
- on helen */
-
-/*
- * select serial console configuration
- */
-#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on OMAP5912 OSK */
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 115200
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-
-
-#include <configs/omap1510.h>
-
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_BOOTARGS "mem=32M console=ttyS0,115200n8 noinitrd \
- root=/dev/nfs rw nfsroot=157.87.82.48:\
- /home/mwd/myfs/target ip=dhcp"
-#define CONFIG_NETMASK 255.255.254.0 /* talk on MY local net */
-#define CONFIG_IPADDR 156.117.97.156 /* static IP I currently own */
-#define CONFIG_SERVERIP 156.117.97.139 /* current IP of my dev pc */
-#define CONFIG_BOOTFILE "uImage" /* file to load */
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "OMAP5912 OSK # " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x10000000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x12000000 /* 32 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x10000000 /* default load address */
-
-/* The 1610 has 6 timers, they can be driven by the RefClk (12Mhz) or by
- * DPLL1. This time is further subdivided by a local divisor.
- */
-#define CONFIG_SYS_TIMERBASE 0xFFFEC500 /* use timer 1 */
-#define CONFIG_SYS_PTV 7 /* 2^(PTV+1), divide by 256 */
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1 0x10000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */
-
-#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
-#define PHYS_FLASH_2 0x01000000 /* Flash Bank #2 */
-
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE /* Monitor at beginning of flash */
-
-#define PHYS_SRAM 0x20000000
-
-/*-----------------------------------------------------------------------
- * FLASH driver setup
- */
-#define CONFIG_SYS_FLASH_CFI 1 /* Flash memory is CFI compliant */
-#define CONFIG_FLASH_CFI_DRIVER 1 /* Use drivers/mtd/cfi_flash.c */
-
-#define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, PHYS_FLASH_2 }
-
-#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */
-#define PHYS_FLASH_SIZE 0x02000000 /* 32MB */
-#define CONFIG_SYS_MAX_FLASH_SECT (259) /* max number of sectors on one chip */
-
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes (~10x faster) */
-#define CONFIG_SYS_FLASH_PROTECTION 1 /* Use hardware sector protection */
-
-#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT (20*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (20*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-#define CONFIG_ENV_IS_IN_FLASH 1
-/* addr of environment */
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
-
-#define CONFIG_ENV_SIZE 0x20000 /* Total Size of Environment Sector */
-#define CONFIG_ENV_OFFSET 0x40000 /* environment starts here */
-
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_RAM_ADDR PHYS_SRAM
-#define CONFIG_SYS_INIT_RAM_SIZE (250 * 1024)
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
- CONFIG_SYS_INIT_RAM_SIZE)
-
-#endif /* __CONFIG_H */