summaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
Diffstat (limited to 'include')
-rw-r--r--include/configs/am335x_evm.h1
-rw-r--r--include/configs/am335x_igep0033.h1
-rw-r--r--include/configs/am43xx_evm.h26
-rw-r--r--include/configs/at91sam9263ek.h13
-rw-r--r--include/configs/bur_am335x_common.h1
-rw-r--r--include/configs/cm_t335.h1
-rw-r--r--include/configs/dra7xx_evm.h1
-rw-r--r--include/configs/dxr2.h2
-rw-r--r--include/configs/omap3_igep00x0.h5
-rw-r--r--include/configs/pcm051.h1
-rw-r--r--include/configs/pengwyn.h1
-rw-r--r--include/configs/pxm2.h1
-rw-r--r--include/configs/rut.h1
-rw-r--r--include/configs/sama5d3_xplained.h203
-rw-r--r--include/configs/sama5d3xek.h23
-rw-r--r--include/configs/tegra-common-post.h57
-rw-r--r--include/configs/tegra-common.h20
-rw-r--r--include/configs/tegra114-common.h10
-rw-r--r--include/configs/tegra124-common.h6
-rw-r--r--include/configs/tegra20-common.h10
-rw-r--r--include/configs/tegra30-common.h10
-rw-r--r--include/configs/ti814x_evm.h1
-rw-r--r--include/configs/ti_am335x_common.h1
-rw-r--r--include/cpsw.h2
-rw-r--r--include/nand.h6
25 files changed, 346 insertions, 58 deletions
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index a5736b7..2020e7f 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -398,7 +398,6 @@
/* Network. */
#define CONFIG_PHY_GIGE
#define CONFIG_PHYLIB
-#define CONFIG_PHY_ADDR 0
#define CONFIG_PHY_SMSC
/* NAND support */
diff --git a/include/configs/am335x_igep0033.h b/include/configs/am335x_igep0033.h
index c00d54f..c17327f 100644
--- a/include/configs/am335x_igep0033.h
+++ b/include/configs/am335x_igep0033.h
@@ -181,7 +181,6 @@
#define CONFIG_NET_RETRY_COUNT 10
#define CONFIG_NET_MULTI
#define CONFIG_PHYLIB
-#define CONFIG_PHY_ADDR 0
#define CONFIG_PHY_SMSC
/* NAND support */
diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h
index c773a18..614857d 100644
--- a/include/configs/am43xx_evm.h
+++ b/include/configs/am43xx_evm.h
@@ -205,4 +205,30 @@
"run usbboot;"
#endif
+
+/* CPSW Ethernet */
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_MII
+#define CONFIG_DRIVER_TI_CPSW
+#define CONFIG_MII
+#define CONFIG_BOOTP_DEFAULT
+#define CONFIG_BOOTP_DNS
+#define CONFIG_BOOTP_DNS2
+#define CONFIG_BOOTP_SEND_HOSTNAME
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_NET_RETRY_COUNT 10
+#define CONFIG_NET_MULTI
+#define CONFIG_PHY_GIGE
+#define CONFIG_PHYLIB
+
+#define CONFIG_SPL_ENV_SUPPORT
+#define CONFIG_SPL_NET_VCI_STRING "AM43xx U-Boot SPL"
+
+#define CONFIG_SPL_ETH_SUPPORT
+#define CONFIG_SPL_NET_SUPPORT
+#define CONFIG_SYS_RX_ETH_BUFFER 64
+
#endif /* __CONFIG_AM43XX_EVM_H */
diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h
index b9aa036..48c12ea 100644
--- a/include/configs/at91sam9263ek.h
+++ b/include/configs/at91sam9263ek.h
@@ -103,6 +103,7 @@
#define CONFIG_CMD_PING 1
#define CONFIG_CMD_DHCP 1
#define CONFIG_CMD_NAND 1
+#define CONFIG_CMD_MMC
#define CONFIG_CMD_USB 1
/* SDRAM */
@@ -123,6 +124,18 @@
#define DATAFLASH_TCSS (0x1a << 16)
#define DATAFLASH_TCHS (0x1 << 24)
+/* MMC */
+#ifdef CONFIG_CMD_MMC
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_GENERIC_ATMEL_MCI
+#endif
+
+/* FAT */
+#ifdef CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+#endif
+
/* NOR flash, if populated */
#ifdef CONFIG_SYS_USE_NORFLASH
#define CONFIG_SYS_FLASH_CFI 1
diff --git a/include/configs/bur_am335x_common.h b/include/configs/bur_am335x_common.h
index 1f57bd2..7bbe596 100644
--- a/include/configs/bur_am335x_common.h
+++ b/include/configs/bur_am335x_common.h
@@ -51,7 +51,6 @@
#define CONFIG_MII /* Required in net/eth.c */
#define CONFIG_SPL_ETH_SUPPORT
#define CONFIG_PHYLIB
-#define CONFIG_PHY_ADDR 1
#define CONFIG_PHY_NATSEMI
#define CONFIG_SPL_NET_SUPPORT
#define CONFIG_SPL_ENV_SUPPORT /* used for a fetching MAC-Address */
diff --git a/include/configs/cm_t335.h b/include/configs/cm_t335.h
index 56e9a8e..26b615b 100644
--- a/include/configs/cm_t335.h
+++ b/include/configs/cm_t335.h
@@ -114,7 +114,6 @@
/* Network. */
#define CONFIG_PHY_GIGE
#define CONFIG_PHYLIB
-#define CONFIG_PHY_ADDR 0
#define CONFIG_PHY_ATHEROS
/* NAND support */
diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
index c67cf60..291c538 100644
--- a/include/configs/dra7xx_evm.h
+++ b/include/configs/dra7xx_evm.h
@@ -62,7 +62,6 @@
#define CONFIG_MII /* Required in net/eth.c */
#define CONFIG_PHY_GIGE /* per-board part of CPSW */
#define CONFIG_PHYLIB
-#define CONFIG_PHY_ADDR 2
/* SPI */
#undef CONFIG_OMAP3_SPI
diff --git a/include/configs/dxr2.h b/include/configs/dxr2.h
index 1e42f5c..75f7812 100644
--- a/include/configs/dxr2.h
+++ b/include/configs/dxr2.h
@@ -26,6 +26,7 @@
#define BOARD_DFU_BUTTON_GPIO 27
#define BOARD_DFU_BUTTON_LED 64
+#define GPIO_LAN9303_NRST 88 /* GPIO2_24 = gpio88 */
#undef CONFIG_DOS_PARTITION
#undef CONFIG_CMD_FAT
@@ -49,7 +50,6 @@
#undef CONFIG_MII
#undef CONFIG_PHY_GIGE
-#define CONFIG_PHY_ADDR 0
#define CONFIG_PHY_SMSC
#define CONFIG_FACTORYSET
diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h
index 12d8141..d56d5b0 100644
--- a/include/configs/omap3_igep00x0.h
+++ b/include/configs/omap3_igep00x0.h
@@ -37,6 +37,11 @@
#define CONFIG_SHOW_BOOT_PROGRESS
#endif
+/* GPIO banks */
+#define CONFIG_OMAP3_GPIO_3 /* GPIO64 .. 95 is in GPIO bank 3 */
+#define CONFIG_OMAP3_GPIO_5 /* GPIO128..159 is in GPIO bank 5 */
+#define CONFIG_OMAP3_GPIO_6 /* GPIO160..191 is in GPIO bank 6 */
+
/* USB */
#define CONFIG_MUSB_UDC 1
#define CONFIG_USB_OMAP3 1
diff --git a/include/configs/pcm051.h b/include/configs/pcm051.h
index 6f41ee7..9af3efd 100644
--- a/include/configs/pcm051.h
+++ b/include/configs/pcm051.h
@@ -297,7 +297,6 @@
#define CONFIG_NET_MULTI
#define CONFIG_PHY_GIGE
#define CONFIG_PHYLIB
-#define CONFIG_PHY_ADDR 0
#define CONFIG_PHY_SMSC
#endif /* ! __CONFIG_PCM051_H */
diff --git a/include/configs/pengwyn.h b/include/configs/pengwyn.h
index 5a55556..fc25966 100644
--- a/include/configs/pengwyn.h
+++ b/include/configs/pengwyn.h
@@ -196,7 +196,6 @@
/* Network */
#define CONFIG_CMD_MII
#define CONFIG_PHYLIB
-#define CONFIG_PHY_ADDR 1
#define CONFIG_PHY_RESET 1
#define CONFIG_PHY_NATSEMI
diff --git a/include/configs/pxm2.h b/include/configs/pxm2.h
index 7722f7b..6276d43 100644
--- a/include/configs/pxm2.h
+++ b/include/configs/pxm2.h
@@ -44,7 +44,6 @@
#undef CONFIG_SPL_NET_VCI_STRING
#undef CONFIG_SPL_ETH_SUPPORT
-#define CONFIG_PHY_ADDR 0
#define CONFIG_PHY_ATHEROS
#define CONFIG_FACTORYSET
diff --git a/include/configs/rut.h b/include/configs/rut.h
index d4519f9..6bddede 100644
--- a/include/configs/rut.h
+++ b/include/configs/rut.h
@@ -41,7 +41,6 @@
#undef CONFIG_SPL_NET_VCI_STRING
#undef CONFIG_SPL_ETH_SUPPORT
-#define CONFIG_PHY_ADDR 1
#define CONFIG_PHY_NATSEMI
#define CONFIG_FACTORYSET
diff --git a/include/configs/sama5d3_xplained.h b/include/configs/sama5d3_xplained.h
new file mode 100644
index 0000000..91cc7d8
--- /dev/null
+++ b/include/configs/sama5d3_xplained.h
@@ -0,0 +1,203 @@
+/*
+ * Configuration settings for the SAMA5D3 Xplained board.
+ *
+ * Copyright (C) 2014 Atmel Corporation
+ * Bo Shen <voice.shen@atmel.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <asm/hardware.h>
+
+#define CONFIG_SYS_TEXT_BASE 0x26f00000
+
+/* ARM asynchronous clock */
+#define CONFIG_SYS_AT91_SLOW_CLOCK 32768
+#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */
+#define CONFIG_SYS_HZ 1000
+
+#define CONFIG_AT91FAMILY
+#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_DISPLAY_CPUINFO
+
+#define CONFIG_CMD_BOOTZ
+#define CONFIG_OF_LIBFDT /* Device Tree support */
+
+/* general purpose I/O */
+#define CONFIG_AT91_GPIO
+
+/* serial console */
+#define CONFIG_ATMEL_USART
+#define CONFIG_USART_BASE ATMEL_BASE_DBGU
+#define CONFIG_USART_ID ATMEL_ID_DBGU
+
+/*
+ * This needs to be defined for the OHCI code to work but it is defined as
+ * ATMEL_ID_UHPHS in the CPU specific header files.
+ */
+#define ATMEL_ID_UHP ATMEL_ID_UHPHS
+
+/*
+ * Specify the clock enable bit in the PMC_SCER register.
+ */
+#define ATMEL_PMC_UHP AT91SAM926x_PMC_UHP
+
+#define CONFIG_BOOTDELAY 3
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+/* No NOR flash */
+#define CONFIG_SYS_NO_FLASH
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_IMI
+#undef CONFIG_CMD_LOADS
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+
+/* SDRAM */
+#define CONFIG_NR_DRAM_BANKS 1
+#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS
+#define CONFIG_SYS_SDRAM_SIZE 0x10000000
+
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
+
+/* NAND flash */
+#define CONFIG_CMD_NAND
+
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_NAND_ATMEL
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3
+/* our ALE is AD21 */
+#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
+/* our CLE is AD22 */
+#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+/* PMECC & PMERRLOC */
+#define CONFIG_ATMEL_NAND_HWECC
+#define CONFIG_ATMEL_NAND_HW_PMECC
+#define CONFIG_PMECC_CAP 4
+#define CONFIG_PMECC_SECTOR_SIZE 512
+#define CONFIG_CMD_NAND_TRIMFFS
+#define CONFIG_CMD_MTDPARTS
+
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_RBTREE
+#define CONFIG_LZO
+#define CONFIG_CMD_UBI
+#define CONFIG_CMD_UBIFS
+#endif
+
+/* Ethernet Hardware */
+#define CONFIG_MACB
+#define CONFIG_RMII
+#define CONFIG_NET_MULTI
+#define CONFIG_NET_RETRY_COUNT 20
+#define CONFIG_MACB_SEARCH_PHY
+#define CONFIG_RGMII
+#define CONFIG_CMD_MII
+#define CONFIG_PHYLIB
+
+/* MMC */
+#define CONFIG_CMD_MMC
+
+#ifdef CONFIG_CMD_MMC
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_GENERIC_ATMEL_MCI
+#define CONFIG_ATMEL_MCI_8BIT
+#endif
+
+/* USB */
+#define CONFIG_CMD_USB
+
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_ATMEL
+#define CONFIG_USB_ATMEL_CLK_SEL_UPLL
+#define CONFIG_USB_OHCI_NEW
+#define CONFIG_SYS_USB_OHCI_CPU_INIT
+#define CONFIG_SYS_USB_OHCI_REGS_BASE ATMEL_BASE_OHCI
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME "SAMA5D3 Xplained"
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
+#define CONFIG_DOS_PARTITION
+#define CONFIG_USB_STORAGE
+#endif
+
+#if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC)
+#define CONFIG_CMD_FAT
+#define CONFIG_FAT_WRITE
+#define CONFIG_CMD_EXT4
+#define CONFIG_CMD_EXT4_WRITE
+#endif
+
+#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
+
+#if CONFIG_SYS_USE_NANDFLASH
+/* bootstrap + u-boot + env in nandflash */
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_OFFSET 0xc0000
+#define CONFIG_ENV_OFFSET_REDUND 0x100000
+#define CONFIG_ENV_SIZE 0x20000
+#define CONFIG_BOOTCOMMAND "nand read 0x21000000 0x180000 0x80000;" \
+ "nand read 0x22000000 0x200000 0x600000;" \
+ "bootz 0x22000000 - 0x21000000"
+#elif CONFIG_SYS_USE_MMC
+/* bootstrap + u-boot + env in sd card */
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_ENV_OFFSET 0x2000
+#define CONFIG_ENV_SIZE 0x1000
+#define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x21000000 at91-sama5d3_xplained.dtb; " \
+ "fatload mmc 0:1 0x22000000 zImage; " \
+ "bootz 0x22000000 - 0x21000000"
+#define CONFIG_SYS_MMC_ENV_DEV 0
+#else
+#define CONFIG_ENV_IS_NOWHERE
+#endif
+
+#ifdef CONFIG_SYS_USE_MMC
+#define CONFIG_BOOTARGS \
+ "console=ttyS0,115200 earlyprintk " \
+ "root=/dev/mmcblk0p2 rw rootwait"
+#else
+#define CONFIG_BOOTARGS \
+ "console=ttyS0,115200 earlyprintk " \
+ "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \
+ "256K(env),256k(evn_redundent),256k(spare)," \
+ "512k(dtb),6M(kernel)ro,-(rootfs) " \
+ "rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs"
+#endif
+
+#define CONFIG_BAUDRATE 115200
+
+#define CONFIG_SYS_PROMPT "U-Boot> "
+#define CONFIG_SYS_CBSIZE 256
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_HUSH_PARSER
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
+
+#endif
diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h
index c34feb5..516be85 100644
--- a/include/configs/sama5d3xek.h
+++ b/include/configs/sama5d3xek.h
@@ -258,6 +258,8 @@
#define CONFIG_SPL_SERIAL_SUPPORT
#define CONFIG_SPL_BOARD_INIT
+#define CONFIG_SYS_MONITOR_LEN (512 << 10)
+
#ifdef CONFIG_SYS_USE_MMC
#define CONFIG_SPL_LDSCRIPT arch/arm/cpu/at91-common/u-boot-spl.lds
#define CONFIG_SPL_MMC_SUPPORT
@@ -267,6 +269,27 @@
#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img"
#define CONFIG_SPL_FAT_SUPPORT
#define CONFIG_SPL_LIBDISK_SUPPORT
+
+#elif CONFIG_SYS_USE_NANDFLASH
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_NAND_DRIVERS
+#define CONFIG_SPL_NAND_BASE
+#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+#define CONFIG_SYS_NAND_PAGE_SIZE 0x800
+#define CONFIG_SYS_NAND_PAGE_COUNT 64
+#define CONFIG_SYS_NAND_OOBSIZE 64
+#define CONFIG_SYS_NAND_BLOCK_SIZE 0x20000
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0x0
+
+#elif CONFIG_SYS_USE_SERIALFLASH
+#define CONFIG_SPL_SPI_SUPPORT
+#define CONFIG_SPL_SPI_FLASH_SUPPORT
+#define CONFIG_SPL_SPI_LOAD
+#define CONFIG_SPL_SPI_BUS 0
+#define CONFIG_SPL_SPI_CS 0
+#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8400
+
#endif
#endif
diff --git a/include/configs/tegra-common-post.h b/include/configs/tegra-common-post.h
index e1a3bbc..76dad4e 100644
--- a/include/configs/tegra-common-post.h
+++ b/include/configs/tegra-common-post.h
@@ -66,27 +66,63 @@
#define BOOT_TARGETS_DHCP ""
#endif
+#if defined(CONFIG_CMD_DHCP) && defined(CONFIG_CMD_PXE)
+#define BOOTCMDS_PXE \
+ "bootcmd_pxe=" \
+ BOOTCMD_INIT_USB \
+ "dhcp; " \
+ "if pxe get; then " \
+ "pxe boot; " \
+ "fi\0"
+#define BOOT_TARGETS_PXE "pxe"
+#else
+#define BOOTCMDS_PXE ""
+#define BOOT_TARGETS_PXE ""
+#endif
+
#define BOOTCMDS_COMMON \
"rootpart=1\0" \
\
+ "do_script_boot=" \
+ "load ${devtype} ${devnum}:${rootpart} " \
+ "${scriptaddr} ${prefix}${script}; " \
+ "source ${scriptaddr}\0" \
+ \
"script_boot=" \
- "if load ${devtype} ${devnum}:${rootpart} " \
- "${scriptaddr} ${prefix}${script}; then " \
- "echo ${script} found! Executing ...;" \
- "source ${scriptaddr};" \
- "fi;\0" \
+ "for script in ${boot_scripts}; do " \
+ "if test -e ${devtype} ${devnum}:${rootpart} " \
+ "${prefix}${script}; then " \
+ "echo Found U-Boot script " \
+ "${prefix}${script}; " \
+ "run do_script_boot; " \
+ "echo SCRIPT FAILED: continuing...; " \
+ "fi; " \
+ "done\0" \
+ \
+ "do_sysboot_boot=" \
+ "sysboot ${devtype} ${devnum}:${rootpart} any " \
+ "${scriptaddr} ${prefix}extlinux.conf\0" \
+ \
+ "sysboot_boot=" \
+ "if test -e ${devtype} ${devnum}:${rootpart} " \
+ "${prefix}extlinux.conf; then " \
+ "echo Found extlinux config " \
+ "${prefix}extlinux.conf; " \
+ "run do_sysboot_boot; " \
+ "echo SCRIPT FAILED: continuing...; " \
+ "fi\0" \
\
"scan_boot=" \
"echo Scanning ${devtype} ${devnum}...; " \
"for prefix in ${boot_prefixes}; do " \
- "for script in ${boot_scripts}; do " \
- "run script_boot; " \
- "done; " \
- "done;\0" \
+ "run sysboot_boot; " \
+ "run script_boot; " \
+ "done\0" \
\
"boot_targets=" \
BOOT_TARGETS_MMC " " \
BOOT_TARGETS_USB " " \
+ BOOT_TARGETS_PXE " " \
BOOT_TARGETS_DHCP " " \
"\0" \
\
@@ -96,7 +132,8 @@
\
BOOTCMDS_MMC \
BOOTCMDS_USB \
- BOOTCMDS_DHCP
+ BOOTCMDS_DHCP \
+ BOOTCMDS_PXE
#define CONFIG_BOOTCOMMAND \
"set usb_need_init; " \
diff --git a/include/configs/tegra-common.h b/include/configs/tegra-common.h
index 9247aef..ae786cf 100644
--- a/include/configs/tegra-common.h
+++ b/include/configs/tegra-common.h
@@ -29,7 +29,6 @@
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
-#define CONFIG_OF_LIBFDT /* enable passing of devicetree */
/* Environment */
#define CONFIG_ENV_VARS_UBOOT_CONFIG
@@ -69,33 +68,20 @@
#undef CONFIG_CMD_NET /* network support */
/* turn on command-line edit/hist/auto */
-#define CONFIG_CMDLINE_EDITING
#define CONFIG_COMMAND_HISTORY
-#define CONFIG_AUTO_COMPLETE
/* turn on commonly used storage-related commands */
-
-#define CONFIG_DOS_PARTITION
-#define CONFIG_EFI_PARTITION
#define CONFIG_PARTITION_UUIDS
-#define CONFIG_FS_EXT4
-#define CONFIG_FS_FAT
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_FS_GENERIC
#define CONFIG_CMD_PART
#define CONFIG_SYS_NO_FLASH
#define CONFIG_CONSOLE_MUX
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-#define CONFIG_BOOTDELAY 2 /* -1 to disable auto boot */
/*
* Miscellaneous configurable options
*/
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
#define CONFIG_SYS_PROMPT V_PROMPT
/*
* Increasing the size of the IO buffer as default nfsargs size is more
@@ -133,8 +119,6 @@
#define CONFIG_TEGRA_GPIO
#define CONFIG_CMD_GPIO
#define CONFIG_CMD_ENTERRCM
-#define CONFIG_CMD_BOOTZ
-#define CONFIG_SUPPORT_RAW_INITRD
/* Defines for SPL */
#define CONFIG_SPL
@@ -161,4 +145,8 @@
#define CONFIG_BOUNCE_BUFFER
#define CONFIG_CRC32_VERIFY
+#ifndef CONFIG_SPL_BUILD
+#include <config_distro_defaults.h>
+#endif
+
#endif /* _TEGRA_COMMON_H_ */
diff --git a/include/configs/tegra114-common.h b/include/configs/tegra114-common.h
index a4e8a5f..555c237 100644
--- a/include/configs/tegra114-common.h
+++ b/include/configs/tegra114-common.h
@@ -26,11 +26,6 @@
*/
#define V_NS16550_CLK 408000000 /* 408MHz (pllp_out0) */
-/*
- * High Level Configuration Options
- */
-#define CONFIG_TEGRA114 /* in a NVidia Tegra114 core */
-
/* Environment information, boards can override if required */
#define CONFIG_LOADADDR 0x80408000 /* def. location for kernel */
@@ -51,6 +46,9 @@
* scriptaddr can be pretty much anywhere that doesn't conflict with something
* else. Put it above BOOTMAPSZ to eliminate conflicts.
*
+ * pxefile_addr_r can be pretty much anywhere that doesn't conflict with
+ * something else. Put it above BOOTMAPSZ to eliminate conflicts.
+ *
* kernel_addr_r must be within the first 128M of RAM in order for the
* kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will
* decompress itself to 0x8000 after the start of RAM, kernel_addr_r
@@ -68,6 +66,7 @@
*/
#define MEM_LAYOUT_ENV_SETTINGS \
"scriptaddr=0x90000000\0" \
+ "pxefile_addr_r=0x90100000\0" \
"kernel_addr_r=0x81000000\0" \
"fdt_addr_r=0x82000000\0" \
"ramdisk_addr_r=0x82100000\0"
@@ -83,5 +82,6 @@
/* For USB EHCI controller */
#define CONFIG_EHCI_IS_TDI
#define CONFIG_USB_EHCI_TXFIFO_THRESH 0x10
+#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1
#endif /* _TEGRA114_COMMON_H_ */
diff --git a/include/configs/tegra124-common.h b/include/configs/tegra124-common.h
index 0a4541b..61e5026 100644
--- a/include/configs/tegra124-common.h
+++ b/include/configs/tegra124-common.h
@@ -18,11 +18,6 @@
*/
#define V_NS16550_CLK 408000000 /* 408MHz (pllp_out0) */
-/*
- * High Level Configuration Options
- */
-#define CONFIG_TEGRA124 /* is an NVIDIA Tegra124 core */
-
/* Environment information, boards can override if required */
#define CONFIG_LOADADDR 0x80408000 /* def. location for kernel */
@@ -79,5 +74,6 @@
/* For USB EHCI controller */
#define CONFIG_EHCI_IS_TDI
#define CONFIG_USB_EHCI_TXFIFO_THRESH 0x10
+#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1
#endif /* _TEGRA124_COMMON_H_ */
diff --git a/include/configs/tegra20-common.h b/include/configs/tegra20-common.h
index b009a31..21bf977 100644
--- a/include/configs/tegra20-common.h
+++ b/include/configs/tegra20-common.h
@@ -24,11 +24,6 @@
*/
#define V_NS16550_CLK 216000000 /* 216MHz (pllp_out0) */
-/*
- * High Level Configuration Options
- */
-#define CONFIG_TEGRA20 /* in a NVidia Tegra20 core */
-
/* Environment information, boards can override if required */
#define CONFIG_LOADADDR 0x00408000 /* def. location for kernel */
@@ -49,6 +44,9 @@
* scriptaddr can be pretty much anywhere that doesn't conflict with something
* else. Put it above BOOTMAPSZ to eliminate conflicts.
*
+ * pxefile_addr_r can be pretty much anywhere that doesn't conflict with
+ * something else. Put it above BOOTMAPSZ to eliminate conflicts.
+ *
* kernel_addr_r must be within the first 128M of RAM in order for the
* kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will
* decompress itself to 0x8000 after the start of RAM, kernel_addr_r
@@ -66,6 +64,7 @@
*/
#define MEM_LAYOUT_ENV_SETTINGS \
"scriptaddr=0x10000000\0" \
+ "pxefile_addr_r=0x10100000\0" \
"kernel_addr_r=0x01000000\0" \
"fdt_addr_r=0x02000000\0" \
"ramdisk_addr_r=0x02100000\0"
@@ -96,6 +95,7 @@
*/
#define CONFIG_USB_EHCI_TXFIFO_THRESH 10
#define CONFIG_EHCI_IS_TDI
+#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1
/* Total I2C ports on Tegra20 */
#define TEGRA_I2C_NUM_CONTROLLERS 4
diff --git a/include/configs/tegra30-common.h b/include/configs/tegra30-common.h
index b5550d7..443c842 100644
--- a/include/configs/tegra30-common.h
+++ b/include/configs/tegra30-common.h
@@ -23,11 +23,6 @@
*/
#define V_NS16550_CLK 408000000 /* 408MHz (pllp_out0) */
-/*
- * High Level Configuration Options
- */
-#define CONFIG_TEGRA30 /* in a NVidia Tegra30 core */
-
/* Environment information, boards can override if required */
#define CONFIG_LOADADDR 0x80408000 /* def. location for kernel */
@@ -48,6 +43,9 @@
* scriptaddr can be pretty much anywhere that doesn't conflict with something
* else. Put it above BOOTMAPSZ to eliminate conflicts.
*
+ * pxefile_addr_r can be pretty much anywhere that doesn't conflict with
+ * something else. Put it above BOOTMAPSZ to eliminate conflicts.
+ *
* kernel_addr_r must be within the first 128M of RAM in order for the
* kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will
* decompress itself to 0x8000 after the start of RAM, kernel_addr_r
@@ -65,6 +63,7 @@
*/
#define MEM_LAYOUT_ENV_SETTINGS \
"scriptaddr=0x90000000\0" \
+ "pxefile_addr_r=0x90100000\0" \
"kernel_addr_r=0x81000000\0" \
"fdt_addr_r=0x82000000\0" \
"ramdisk_addr_r=0x82100000\0"
@@ -80,5 +79,6 @@
/* For USB EHCI controller */
#define CONFIG_EHCI_IS_TDI
#define CONFIG_USB_EHCI_TXFIFO_THRESH 0x10
+#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1
#endif /* _TEGRA30_COMMON_H_ */
diff --git a/include/configs/ti814x_evm.h b/include/configs/ti814x_evm.h
index ba16b1c..b51400c 100644
--- a/include/configs/ti814x_evm.h
+++ b/include/configs/ti814x_evm.h
@@ -233,7 +233,6 @@
#define CONFIG_NET_MULTI
#define CONFIG_PHY_GIGE
#define CONFIG_PHYLIB
-#define CONFIG_PHY_ADDR 1
#define CONFIG_PHY_ET1011C
#define CONFIG_PHY_ET1011C_TX_CLK_FIX
diff --git a/include/configs/ti_am335x_common.h b/include/configs/ti_am335x_common.h
index 7e9ca01..50c3203 100644
--- a/include/configs/ti_am335x_common.h
+++ b/include/configs/ti_am335x_common.h
@@ -30,6 +30,7 @@
/* Network defines. */
#define CONFIG_CMD_NET /* 'bootp' and 'tftp' */
#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_MII
#define CONFIG_BOOTP_DNS /* Configurable parts of CMD_DHCP */
#define CONFIG_BOOTP_DNS2
#define CONFIG_BOOTP_SEND_HOSTNAME
diff --git a/include/cpsw.h b/include/cpsw.h
index 743cb96..a73843d 100644
--- a/include/cpsw.h
+++ b/include/cpsw.h
@@ -19,7 +19,7 @@
struct cpsw_slave_data {
u32 slave_reg_ofs;
u32 sliver_reg_ofs;
- int phy_id;
+ int phy_addr;
int phy_if;
};
diff --git a/include/nand.h b/include/nand.h
index 84116f4..fc735d1 100644
--- a/include/nand.h
+++ b/include/nand.h
@@ -21,10 +21,16 @@
* at the same time, so do it here. When all drivers are
* converted, this will go away.
*/
+#ifdef CONFIG_SPL_BUILD
+#if defined(CONFIG_NAND_FSL_ELBC) || defined(CONFIG_NAND_FSL_IFC)
+#define CONFIG_SYS_NAND_SELF_INIT
+#endif
+#else
#if defined(CONFIG_NAND_FSL_ELBC) || defined(CONFIG_NAND_ATMEL)\
|| defined(CONFIG_NAND_FSL_IFC)
#define CONFIG_SYS_NAND_SELF_INIT
#endif
+#endif
extern void nand_init(void);