summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-12-24arm, davinci: Add SPL support for DA850 SoCsChristian Riesch
This code adds an SPL for booting from SPI flash on DA850 SoCs. Signed-off-by: Christian Riesch <christian.riesch@omicron.at> Cc: Heiko Schocher <hs@denx.de> Cc: Sandeep Paulraj <s-paulraj@ti.com> Cc: Tom Rini <trini@ti.com> Acked-by: Tom Rini <trini@ti.com>
2011-12-24sf: Add spi_boot() to allow booting from SPI flash in an SPLChristian Riesch
Signed-off-by: Christian Riesch <christian.riesch@omicron.at> Cc: Heiko Schocher <hs@denx.de> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Scott Wood <scottwood@freescale.com> Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-12-24spl: display_options.o is required for SPI flash support in SPLChristian Riesch
Signed-off-by: Christian Riesch <christian.riesch@omicron.at> Cc: Heiko Schocher <hs@denx.de> Cc: Mike Frysinger <vapier@gentoo.org>
2011-12-24ARM: omap3: add support to Technexion twister boardStefano Babic
The twister board is a development board using the TAM3517 SOM. Support for NAND, 2 Ethernet (EMAC and SMC911), USB (EHCI_OMAP). Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Tapani Utrianen <tapani@technexion.com> CC: Tom Rini <tom.rini@gmail.com> CC: Sandeep Paulraj <s-paulraj@ti.com>
2011-12-24ARM: omap3: added common configuration for Technexion TAM3517Stefano Babic
The TAM3517 is a SOM module that can be used on custom boards. The patch add a common configuration file that is included by the boards using this module. Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Tapani Utrianen <tapani@technexion.com> CC: Tom Rini <tom.rini@gmail.com> CC: Sandeep Paulraj <s-paulraj@ti.com>
2011-12-24vision2: Fix checkpatch warningFabio Estevam
Fix the following checkpatch warning: WARNING: braces {} are not necessary for single statement blocks Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2011-12-23Merge branch 'next' of ../nextWolfgang Denk
* 'next' of ../next: mkenvimage: Add version info switch (-V) mkenvimage: Fix getopt() error handling mkenvimage: Fix some typos phy: add Micrel KS8721BL phy definition net: introduce per device index mvgbe: remove setting of ethaddr within the driver x86: Add support for specifying an initrd with the zboot command x86: Refactor the zboot innards so they can be reused with a vboot image x86: Add infrastructure to extract an e820 table from the coreboot tables x86: Add support for booting Linux using the 32 bit boot protocol x86: Clean up the x86 zimage code in preparation to extend it x86: Import code from coreboot's libpayload to parse the coreboot table x86: Initial commit for running as a coreboot payload CHECKPATCH: ./board/esd/hh405/logo_320_240_8bpp.c CHECKPATCH: ./board/esd/hh405/logo_1024_768_8bpp.c CHECKPATCH: ./board/esd/hh405/logo_320_240_4bpp.c CHECKPATCH: ./board/esd/hh405/logo_640_480_24bpp.c CHECKPATCH: ./board/esd/apc405/logo_640_480_24bpp.c CHECKPATCH: ./board/esd/voh405/logo_320_240_4bpp.c CHECKPATCH: ./board/esd/voh405/logo_640_480_24bpp.c CHECKPATCH: ./board/esd/hh405/fpgadata.c CHECKPATCH: ./board/esd/pci405/fpgadata.c CHECKPATCH: ./board/esd/tasreg/fpgadata.c CHECKPATCH: ./board/esd/apc405/fpgadata.c CHECKPATCH: ./board/esd/voh405/fpgadata.c CHECKPATCH: ./board/esd/ash405/fpgadata.c CHECKPATCH: ./board/esd/dasa_sim/fpgadata.c CHECKPATCH: ./board/esd/ar405/fpgadata_xl30.c CHECKPATCH: ./board/esd/ar405/fpgadata.c CHECKPATCH: ./board/esd/plu405/fpgadata.c CHECKPATCH: ./board/esd/wuh405/fpgadata.c CHECKPATCH: ./board/esd/cpci405/fpgadata_cpci405.c CHECKPATCH: ./board/esd/cpci405/fpgadata_cpci405ab.c CHECKPATCH: ./board/esd/cpci405/fpgadata_cpci4052.c CHECKPATCH: ./board/esd/canbt/fpgadata.c CHECKPATCH: ./board/esd/du405/fpgadata.c CHECKPATCH: ./board/esd/cpciiser4/fpgadata.c CHECKPATCH: ./board/dave/PPChameleonEVB/fpgadata.c avr32:mmu.c: fix printf() length modifier fat.c: fix printf() length modifier cmd_sf.c: fix printf() length modifier Make printf and vprintf safe from buffer overruns vsprintf: Move function documentation into header file Add safe vsnprintf and snprintf library functions Move vsprintf functions into their own header Conflicts: tools/mkenvimage.c Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-12-23Prepare v2011.12Wolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-12-23doc/mkimage.1: Fix -D/-f options formattingHorst Kronstorfer
Signed-off-by: Horst Kronstorfer <hkronsto@frequentis.com>
2011-12-23post/lib_powerpc/multi.c: fix stack overflow errorWolfgang Denk
The code and comment disagreed: the comment claimed that r6...r31 were copied, and consequently the arrays for "src" and "dst" were declared with 26 entries, but the actual code ("lmw r5,0(r3)" and "stmw r5,0(r4)") copied _27_ words (r5 through r31), which resulted in false "POST cpu Error at multi test" messages. Fix the comment and the array sizes. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Anatolij Gustschin <agust@denx.de> Cc: Stefan Roese <sr@denx.de> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Kim Phillips <kim.phillips@freescale.com> Cc: Andy Fleming <afleming@gmail.com> Acked-by: Anatolij Gustschin <agust@denx.de> Tested-by: Anatolij Gustschin <agust@denx.de>
2011-12-23post/lib_powerpc/multi.c: code cleanupWolfgang Denk
Clean up and document the code: - get rid of unneeded code block - add comment which code is generated Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Anatolij Gustschin <agust@denx.de> Cc: Stefan Roese <sr@denx.de> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Kim Phillips <kim.phillips@freescale.com> Cc: Andy Fleming <afleming@gmail.com> Acked-by: Anatolij Gustschin <agust@denx.de>
2011-12-23post/lib_powerpc/multi.c: make checkpatch cleanWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Anatolij Gustschin <agust@denx.de> Cc: Stefan Roese <sr@denx.de> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Kim Phillips <kim.phillips@freescale.com> Cc: Andy Fleming <afleming@gmail.com> Acked-by: Anatolij Gustschin <agust@denx.de>
2011-12-23PPC: fix "Warning: FOO uses hard float, BAR uses soft float".Wolfgang Denk
It appears that with recent versions of GCC the explicit "-mhard-float" command line option takes precedence over the ``asm(".gnu_attribute 4, 2");'' in the source file, so this no longer helps to avoid the warnings we get when linking code that uses FP instructions with other code that was built using soft-float. We can remove the ".gnu_attribute" (which appears to carry no other information, at least so far) from the object files, but we also have to make sure we don't pull in the __gcc_qsub() and __gcc_qmul() functions from the standard libgcc, as these would again "infect" our linking. We copy this code from: gcc-4.2.2/gcc/config/rs6000/darwin-ldouble.c This old version was chosen because it was still available under a compatible license (GCC v2+). The file was stripped down to the needed parts, and reformatted so it passes checkpatch with only one warning (do not add new typedefs). Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Stefan Roese <sr@denx.de> Cc: Andy Fleming <afleming@gmail.com> Cc: Kim Phillips <kim.phillips@freescale.com> Tested-by: Stefan Roese <sr@denx.de> Tested-by: Anatolij Gustschin <agust@denx.de>
2011-12-22Print program basename instead of whole path in usage()Horst Kronstorfer
Signed-off-by: Horst Kronstorfer <hkronsto@frequentis.com>
2011-12-22tegra2: Fix out-of-tree build for Ventana.Thierry Reding
Since Ventana is derived from Seaboard and requires seaboard.c to build, make sure board/nvidia/seaboard is created in the build tree. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Acked-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Tested-by: Wolfgang Denk <wd@denx.de>
2011-12-21Prepare v2011.12-rc3Wolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-12-21arm: Tegra: fix undefined instruction hang immediately after resetTom Warren
commit 0d479b53 (Aneesh V) added code for OMAP4 that doesn't execute on Tegra, due to the AVP (ARM7TDI) not having a CP15. Result was an undefined instruction hang just after reset. Signed-off-by: Tom Warren <twarren@nvidia.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@ti.com> Acked-by: Aneesh V <aneesh@ti.com>
2011-12-21doc/mkimage.1: Fix some typosHorst Kronstorfer
Signed-off-by: Horst Kronstorfer <hkronsto@frequentis.com> Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-12-20mkenvimage: Add version info switch (-V)Horst Kronstorfer
Signed-off-by: Horst Kronstorfer <hkronsto@frequentis.com>
2011-12-20mkenvimage: Fix getopt() error handlingHorst Kronstorfer
Since the original implementation indicates explicit error handling we turn off getopt()'s internal error messaging to avoid duplicate error messages. Additionally we add ':' (missing option argument) error handling. Signed-off-by: Horst Kronstorfer <hkronsto@frequentis.com>
2011-12-20mkenvimage: Fix some typosHorst Kronstorfer
Signed-off-by: Horst Kronstorfer <hkronsto@frequentis.com>
2011-12-20phy: add Micrel KS8721BL phy definitionVladimir Zapolskiy
This adds support for the Micrel KS8721BL/SL PHY. The definition is taken from the correspondent datasheet. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2011-12-20km/common: add toolchain variableHolger Brunck
Add a variable "toolchain" and configure the rootpath for the nfsargs with this variable. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> cc: Wolfgang Denk <wd@denx.de>
2011-12-20Makefile: fix distclean and *_config rules to be less noiseLauri Hintsala
Signed-off-by: Lauri Hintsala <lauri.hintsala@bluegiga.com>
2011-12-20board/eltec/elppc/misc.c: Fix GCC 4.6 build warningAnatolij Gustschin
Fix: misc.c: In function 'misc_init_r': misc.c:119:3: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-12-20drivers/net/e1000.c: Fix GCC 4.6 build warningsAnatolij Gustschin
Fix: e1000.c: In function 'e1000_read_mac_addr': e1000.c:1149:2: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] e1000.c:1149:2: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Kyle Moffett <Kyle.D.Moffett@boeing.com> Acked-by: Kyle Moffett <Kyle.D.Moffett@boeing.com>
2011-12-20board/esd/cpci750/mv_eth.c: Fix GCC 4.6 build warningsAnatolij Gustschin
Fix: mv_eth.c: In function 'mv64360_eth_real_open': mv_eth.c:425:6: warning: variable 'port_status' set but not used [-Wunused-but-set-variable] mv_eth.c: In function 'mv64360_eth_stop': mv_eth.c:643:15: warning: variable 'port_num' set but not used [-Wunused-but-set-variable] mv_eth.c: In function 'mv64360_eth_xmit': mv_eth.c:719:15: warning: variable 'port_num' set but not used [-Wunused-but-set-variable] mv_eth.c: In function 'mv64360_eth_receive': mv_eth.c:804:15: warning: variable 'port_num' set but not used [-Wunused-but-set-variable] mv_eth.c: In function 'mv64360_eth_get_stats': mv_eth.c:903:15: warning: variable 'port_num' set but not used [-Wunused-but-set-variable] mv_eth.c: In function 'mv64360_eth_update_stat': mv_eth.c:931:24: warning: variable 'dummy' set but not used [-Wunused-but-set-variable] mv_eth.c:930:15: warning: variable 'port_num' set but not used [-Wunused-but-set-variable] mv_eth.c: In function 'mv64360_eth_print_stat': mv_eth.c:1012:15: warning: variable 'port_num' set but not used [-Wunused-but-set-variable] mv_eth.c: In function 'eth_clear_mib_counters': mv_eth.c:2069:15: warning: variable 'dummy' set but not used [-Wunused-but-set-variable Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Reinhard Arlt <reinhard.arlt@esd.eu>
2011-12-20usb: s3c_udc_otg: fix GCC 4.6 build warningsAnatolij Gustschin
Fix: In file included from s3c_udc_otg.c:216:0: s3c_udc_otg_xfer_dma.c: In function 'complete_tx': s3c_udc_otg_xfer_dma.c:280:33: warning: variable 'is_short' set but not used s3c_udc_otg_xfer_dma.c:280:6: warning: variable 'ep_tsr' set but not used s3c_udc_otg_xfer_dma.c: In function 's3c_udc_irq': s3c_udc_otg_xfer_dma.c:469:16: warning: variable 'flags' set but not used s3c_udc_otg_xfer_dma.c:468:18: warning: variable 'gintmsk' set but not used s3c_udc_otg_xfer_dma.c: In function 's3c_queue': s3c_udc_otg_xfer_dma.c:582:14: warning: variable 'gintsts' set but not used s3c_udc_otg_xfer_dma.c:581:16: warning: variable 'flags' set but not used s3c_udc_otg_xfer_dma.c: In function 's3c_ep0_read': s3c_udc_otg_xfer_dma.c:778:6: warning: variable 'ret' set but not used s3c_udc_otg_xfer_dma.c: In function 's3c_udc_set_halt': s3c_udc_otg_xfer_dma.c:1020:16: warning: variable 'flags' set but not used s3c_udc_otg_xfer_dma.c: In function 's3c_ep0_setup': s3c_udc_otg_xfer_dma.c:1258:13: warning: initialization from incompatible pointer type [enabled by default] s3c_udc_otg_xfer_dma.c:1239:16: warning: variable 'is_in' set but not used s3c_udc_otg_xfer_dma.c:1239:9: warning: variable 'bytes' set but not used s3c_udc_otg.c: In function 'usb_gadget_register_driver': s3c_udc_otg.c:292:16: warning: variable 'flags' set but not used s3c_udc_otg.c: In function 'usb_gadget_unregister_driver': s3c_udc_otg.c:338:16: warning: variable 'flags' set but not used s3c_udc_otg.c: In function 's3c_ep_enable': s3c_udc_otg.c:582:16: warning: variable 'flags' set but not used s3c_udc_otg.c: In function 's3c_ep_disable': s3c_udc_otg.c:646:16: warning: variable 'flags' set but not used s3c_udc_otg.c: In function 's3c_dequeue': s3c_udc_otg.c:704:16: warning: variable 'flags' set but not used Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Remy Bohmer <linux@bohmer.net>
2011-12-20board/samsung/universal_c210/universal.c: Fix build warningAnatolij Gustschin
Fix: universal.c: In function 's5pc210_phy_control': universal.c:273:7: warning: 'ret' may be used uninitialized in this function [-Wuninitialized] Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Acked-by: Minkyu Kang <mk7.kang@samsung.com>
2011-12-20FAT: fix some issues in FAT write support codeAnatolij Gustschin
Writing a file to the FAT partition didn't work while a test using a CF card. The test was done on mpc5200 based board (powerpc). There is a number of problems in FAT write code: Compiler warning: fat_write.c: In function 'file_fat_write': fat_write.c:326: warning: 'counter' may be used uninitialized in this function fat_write.c:326: note: 'counter' was declared here 'l_filename' string is not terminated, so a file name with garbage at the end is used as a file name as shown by debug code. Return value of set_contents() is not checked properly so actually a file won't be written at all (as checked using 'fatls' after a write attempt with 'fatwrite' command). do_fat_write() doesn't return the number of written bytes if no error happened. However the return value of this function is used to show the number of written bytes in do_fat_fswrite(). The patch adds some debug code and fixes above mentioned problems and also fixes a typo in error output. NOTE: after a successful write to the FAT partition (under U-Boot) the partition was checked under Linux using fsck. The partition needed fixing FATs: -bash-3.2# fsck -a /dev/sda1 fsck 1.39 (29-May-2006) dosfsck 2.11, 12 Mar 2005, FAT32, LFN FATs differ but appear to be intact. Using first FAT. Performing changes. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Donggeun Kim <dg77.kim@samsung.com> Cc: Aaron Williams <Aaron.Williams@cavium.com> Acked-by: Donggeun Kim <dg77.kim@samsung.com>
2011-12-20Merge branch 'master' of /home/wd/git/u-boot/custodiansWolfgang Denk
* 'master' of /home/wd/git/u-boot/custodians: common/cmd_pxe.c: Fix GCC 4.6 build warnings AVR32: fix timer_init() function
2011-12-20Merge branch 'agust@denx.de' of git://git.denx.de/u-boot-stagingWolfgang Denk
* 'agust@denx.de' of git://git.denx.de/u-boot-staging: common/cmd_pxe.c: Fix GCC 4.6 build warnings AVR32: fix timer_init() function
2011-12-20drivers/net/e1000_spi.c: Fix build warningsAnatolij Gustschin
Fix: e1000_spi.c: In function 'spi_free_slave': e1000_spi.c:115: warning: unused variable 'hw' e1000_spi.c: In function 'do_e1000_spi': e1000_spi.c:472: warning: 'checksum' may be used uninitialized in this function e1000_spi.c:472: note: 'checksum' was declared here Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Kyle Moffett <Kyle.D.Moffett@boeing.com> Acked-by: Kyle Moffett <Kyle.D.Moffett@boeing.com>
2011-12-20net: Fix arguments in tftpput commandSimon Glass
The switch to strict_strtoul() was not done correctly - this fixes the compile error when CONFIG_CMD_TFTPPUT is active. There appears to very little use of strict_strtoul() in commands, so it might be easier to switch to simple_strtoul(). If not, we should decide the best way to use strict_strtoul(). For now I have added a friendly message which will of course increase code size. Signed-off-by: Simon Glass <sjg@chromium.org>
2011-12-20AVR32: fix timer_init() functionSven Schnelle
timer_init() now returns an int (the error code) instead of void. This makes compilation fail with: interrupts.c:111: error: conflicting types for 'timer_init' /home/svens/u-boot/u-boot/include/common.h:246: error: previous declaration of 'timer_init' was here make[1]: *** [interrupts.o] Error 1 Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Andreas Bießmann <andreas.devel@googlemail.com> Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-12-20net: introduce per device indexMichael Walle
Instead of counting the device index everytime a functions needs it, store it in the eth_device struct. eth_register() keeps track of the indices and updates the device's index number. This simplifies some functions in net/eth.c. Additionally, a network driver can now query its index, eg. to get the correct environment ethaddr name. Signed-off-by: Michael Walle <michael@walle.cc> Cc: Prafulla Wadaskar <prafulla@marvell.com> Cc: Mike Frysinger <vapier@gentoo.com> Cc: Wolfgang Denk <wd@denx.de> Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-12-20mvgbe: remove setting of ethaddr within the driverMichael Walle
A network driver should not touch the environment at all. This patch fixes this behaviour by removing the code for setting a default/randomized MAC address. Signed-off-by: Michael Walle <michael@walle.cc> Acked-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Prafulla Wadaskar <prafulla@marvell.com> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Prafulla Wadaskar <prafulla@marvell.com> Cc: Valentin Longchamp <valentin.longchamp@keymile.com> Cc: Eric Cooper <ecc@cmu.edu> Cc: Jason Cooper <u-boot@lakedaemon.net> Cc: Siddarth Gore <gores@marvell.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Simon Guinot <simon.guinot@sequanux.org> Acked-by: Prafulla Wadaskar <prafulla@marvell.com>
2011-12-20common/cmd_pxe.c: Fix GCC 4.6 build warningsHeiko Schocher
Fix: cmd_pxe.c: In function 'parse_pxefile_top': cmd_pxe.c:941:5: warning: 'err' may be used uninitialized in this function [-Wuninitialized] cmd_pxe.c:921:6: note: 'err' was declared here Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Jason Hobbs <jason.hobbs@calxeda.com> Acked-by: Jason Hobbs <jason.hobbs@calxeda.com>
2011-12-20AVR32: fix timer_init() functionSven Schnelle
timer_init() now returns an int (the error code) instead of void. This makes compilation fail with: interrupts.c:111: error: conflicting types for 'timer_init' /home/svens/u-boot/u-boot/include/common.h:246: error: previous declaration of 'timer_init' was here make[1]: *** [interrupts.o] Error 1 Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Andreas Bießmann <andreas.devel@googlemail.com> Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-12-19PXA: Kill last remnants of set_GPIO_mode functionMarek Vasut
GPIO configuration shall never be done inside a driver, never. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
2011-12-19ARM: tny_a9260: re-add MACH_TYPE_TNY_A9G20 and MACH_TYPE_TNY_A9260Anatolij Gustschin
MACH_TYPE_TNY_A9G20 and MACH_TYPE_TNY_A9260 were removed from mach-types.h. Add them to the board config file. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Simon Glass <sjg@chromium.org>
2011-12-19ARM: sbc35_a9g20: re-add MACH_TYPE_SBC35_A9G20Anatolij Gustschin
MACH_TYPE_SBC35_A9G20 was removed from mach-types.h. Add it to the board config file. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Simon Glass <sjg@chromium.org>
2011-12-19arm, fdt: update ethernet mac address before booting LinuxHeiko Schocher
Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Gerald van Baren <gvb.uboot@gmail.com> Acked-by: Wolfgang Denk <wd@denx.de>
2011-12-19add print_cpuinfo to s3c24x0David Müller (ELSOFT AG)
Hello This patch adds support for "print_cpuinfo" on Samsung s3c24x0 based targets. If activated by "#define CONFIG_DISPLAY_CPUINFO", the chip ID and the 3 main cpu frequencies will be displayed. Dave Signed-off-by: David Müller <d.mueller@elsoft.ch>
2011-12-19omap4_panda: Initialize the USB phyChris Lalancette
During misc_init_r, make sure to setup the clocks properly for the USB hub on the pandaboard. With this in place, the USB hub and the ethernet works on the pandaboard. Signed-off-by: Chris Lalancette <clalancette@gmail.com> Acked-by: Aneesh V <aneesh@ti.com>
2011-12-19davinci: Fixed wrong timebase clock frequency.Manfred Rudigier
Signed-off-by: Manfred Rudigier <manfred.rudigier@omicron.at>
2011-12-19arm926ejs: remove noop flush_dcache_all functionIlya Yanok
Commit 2f3427c added noop cache functions implementation for arm926ejs to fix compilation of drivers depending on these functions (DaVinci EMAC in particular). Unfortunately, the bug was introduced: noop implementation calls dcache_disable which calls flush_dcache_all which in turn calls dcache_disable thus creating an infinite loop. This patch removes noop implementation for flush_dcache_all, we already have default one in arch/arm/lib/cache.c and it should be used instead. Signed-off-by: Ilya Yanok <yanok@emcraft.com> Tested-by: Matthias Weisser <weisserm@arcor.de>
2011-12-19M28: Fix tab indent in u-boot.bdMarek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Detlev Zundel <dzu@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2011-12-19Fix building for mx51evk boardAnatolij Gustschin
Fix: mx51evk.c:206:6: error: conflicting types for 'board_ehci_hcd_init' /u-boot/include/usb/ehci-fsl.h:254:5: note: previous declaration of 'board_ehci_hcd_init' was here We also fix board_ehci_hcd_init() for mx53loco board. Building for mx53loco worked since <usb/ehci-fsl.h> is not included here. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-12-19Prepare v2011.12-rc2Wolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
generated by cgit v0.10.2 at 2024-07-31 17:11:35 (GMT)