summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-08-13buildman: Allow selection of the number of commits to buildSimon Glass
It is useful to be able to build only some of the commits in a branch. Add support for the -c option to allow this. It was previously parsed by buildman but not implemented. Suggested-by: York Sun <yorksun@freescale.com> Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: York Sun <yorksun@freescale.com>
2014-08-13buildman: Introduce an 'and' operator for board selectionSimon Glass
Currently buildman allows a list of boards to build to be specified on the command line. The list can include specific board names, architecture, SOC and so on. At present the list of boards is dealt with in an 'OR' fashion, and there is no way to specify something like 'arm & freescale', meaning boards with ARM architecture but only those made by Freescale. This would exclude the PowerPC boards made by Freescale. Support an '&' operator on the command line to permit this. Ensure that arguments can be specified in a single string to permit easy shell quoting. Suggested-by: York Sun <yorksun@freescale.com> Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: York Sun <yorksun@freescale.com>
2014-08-13buildman: Add a few more toolchain examples to the READMESimon Glass
The current README is a bit sparse in this area, so add a few more examples. Suggested-by: Tom Rini <trini@ti.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2014-08-13buildman: Add a message indicating there are no errorsSimon Glass
If buildman finds no problems it prints nothing. This can be a bit confusing, so add a message that all is well. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-08-13buildman: Add an option to specify the buildman config fileSimon Glass
Add a new --config-file option (-G) to specify a different configuration file from the default ~/.buildman. Reported-by: Tom Rini <trini@ti.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2014-08-13buildman: Remove unused non-incremental build method codeSimon Glass
The non-incremental build method is no longer used, so remove it. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-08-13buildman: Add verbose option to display errors as they happenSimon Glass
Normally buildman operates in two passes - one to do the build and another to summarise the errors. Add a verbose option (-v) to display build problems as they happen. With -e also given, this will display errors too. When building the current source tree (rather than a list of commits in a branch), both -v and -e are enabled automatically. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-08-13buildman: Refactor output optionsSimon Glass
We need the output options to be available in several places. It's a pain to pass them into each function. Make them properties of the builder and add a single function to set them up. At the same time, add a function which produces summary output using these options. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-08-13buildman: Sort command line optionsSimon Glass
These options have got slightly out of order. Fix them. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-08-13buildman: Move BuilderThread code to its own fileSimon Glass
The builder.py file is getting too long, so split out some code. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-08-13buildman: Allow building of current source treeSimon Glass
Originally buildman had some support for building the current source tree. However this was dropped before it was submitted, as part of the effort to make it faster when building entire branches. Reinstate this support. If no -b option is given, buildman will build the current source tree. Reported-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2014-08-13buildman: Add some notes about moving from MAKEALLSimon Glass
For those used to MAKEALL, buildman seems strange. Add some notes to ease the transition. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-08-13buildman: Fix a few typosSimon Glass
There are several typos in the README - fix them. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-08-12Merge branch 'master' of git://git.denx.de/u-boot-blackfinTom Rini
2014-08-11lcd: support displaying 24bpp BMPs on >= 24bpp LCDsHannes Petermaier
most todays LCDs support 32bpp e.g. the framebuffer memory is 32bpp organized. To support 24bpp BMPs we need to take only 3 byte from the bpp and set one byte from the FB to 0. Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
2014-08-11lcd: remove unused lcd_puts_xyJeroen Hofstee
prevents a clang warning that the function is never used. cc: agust@denx.de Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-08-11video: ipu_disp: squash clang warningJeroen Hofstee
Since rgb2ycbcr_coeff and friends are declared const, but assigned to a void pointer, clang will warn that the const is implicity casted away. If the pointer is changed to void const * gcc will warn when it is implicitly casted to a const int array. Just add a correctly typed pointer instead to prevent these casts and hence the warnings. Cc: Troy Kisky <troy.kisky@boundarydevices.com> Cc: Stefano Babic <sbabic@denx.de> Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-08-11video: ipu_disp: wait for DP SF end irq when disabling sync BG flowsLiu Ying
Instead of waiting for DC triple buffer to be cleared, this patch changes to wait for a relevant DP sync flow end interrupt to come when disabling sync BG flows. In this way, we align the implement to the freescale internal IPUv3 driver. After applying this patch, an uboot hang up issue at the arch_preboot_os() stage, where we disable a relevant ipu display channel, is not observed any more on some MX6DL platforms. Signed-off-by: Liu Ying <Ying.Liu@freescale.com>
2014-08-10video: Add support for TI's AM335x LCD-ControllerHannes Petermaier
- Adds support for a minimal framebuffer driver of TI's AM335x SoC to be compatible with Wolfgang Denk's LCD-Framework (CONFIG_LCD, common/lcd.c) Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
2014-08-10lcd: cleanup unused functionsHannes Petermaier
This patch removes following two functions: - lcd_getbgcolor(...) not used somewhere outside lcd.c, internally we use now the global variable lcd_color_bg (was return value of function before) - lcd_getfgcolor(...) not used in any place of u-boot Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at> [agust: rebased] Signed-off-by: Anatolij Gustschin <agust@denx.de>
2014-08-10Add support for 32-bit organized framebuffersHannes Petermaier
- Adds support for 32-bit organized framebuffers to the LCD-framework. Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at> Cc: agust@denx.de
2014-08-09env_fat.c: Make sure our buffer is cache alignedTom Rini
We must ensure the buffer we read the env into is aligned or we may get warnings later on. Signed-off-by: Tom Rini <trini@ti.com>
2014-08-09bootm: use genimg_get_kernel_addr()Bryan Wu
Use the new API which is originally taken out from boot_get_kernel of bootm.c Signed-off-by: Bryan Wu <pengw@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> [trini: Fix warnings with CONFIG_FIT] Signed-off-by: Tom Rini <trini@ti.com>
2014-08-09pxe: detect image format before calling bootm/bootzBryan Wu
Trying bootm for zImage will print out several error message which is not necessary for this case. So detect image format firstly, only try bootm for legacy and FIT format image then try bootz for others. This patch needs new function genimg_get_kernel_addr(). Signed-off-by: Bryan Wu <pengw@nvidia.com>
2014-08-09image: introduce genimg_get_kernel_addr()Bryan Wu
Kernel address is normally stored as a string argument of bootm or bootz. This function is taken out from boot_get_kernel() of bootm.c, which can be reused by others. Signed-off-by: Bryan Wu <pengw@nvidia.com> [trini: Fix warnings with CONFIG_FIT] Signed-off-by: Tom Rini <trini@ti.com>
2014-08-09get_maintainer.pl: add support for scanning multiple MAINTAINERS filesDaniel Schwierzeck
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-09get_maintainer.pl: adapt to U-Boot treeDaniel Schwierzeck
Switch core maintainer to Tom Rini. Adapt directory layout for git tree detection. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
2014-08-09get_maintainer.pl: import script from linux 3.15Daniel Schwierzeck
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-08-09MAINTAINERS: add initial versionDaniel Schwierzeck
MAINTAINERS contains all currently known custodians based on infos from wiki [1] and u-boot git forks [2]. [1] http://www.denx.de/wiki/U-Boot/Custodians [2] http://git.denx.de/?p=u-boot.git;a=forks Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-08-09lib: lmb: fix overflow in __lmb_alloc_base w/ large RAMStephen Warren
If a 32-bit system has 2GB of RAM, and the base address of that RAM is 2GB, then start+size will overflow a 32-bit value (to a value of 0). __lmb_alloc_base is affected by this; it calculates the minimum of (start+size of RAM) and max_addr. However, when start+size is 0, it is always less than max_addr, which causes the value of max_addr not to be taken into account when restricting the allocation's location. Fix this by calculating start+size separately, and if that calculation underflows, using -1 (interpreted as the max unsigned value) as the value instead, and then taking the min of that and max_addr. Now that start+size doesn't overflow, it's typically large, and max_addr dominates the min() call, and is taken into account. The user-visible symptom of this bug is that CONFIG_BOOTMAP_SZ is ignored on Tegra124 systems with 2GB of RAM, which in turn causes the DT to be relocated at the very end of RAM, which the ARM Linux kernel doesn't map during early boot, and which causes boot failures. With this fix, CONFIG_BOOTMAP_SZ correctly restricts the relocated DT to a much lower address, and everything works. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-08-09ARM: rpi_b: use new generic $bootcmdStephen Warren
Replace the custom $bootcmd with that from <config_distro_bootcmd.h>. There should be no functional change, since the new generic $bootcmd was derived strongly from tegra-common-post.h, after which this part of rpi_b.h was modelled. The #defines to enable/disable U-Boot commands/features were moved earlier in rpi_b.h, so they are set up before config_distro_bootcmd.h is included, since it tests whether certain features should be included based on those defines. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-08-09ARM: tegra: use new generic $bootcmdStephen Warren
Replace the custom $bootcmd with that from <config_distro_bootcmd.h>. There should be no functional change, since the new generic $bootcmd was derived strongly from tegra-common-post.h. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-08-09config: introduce a generic $bootcmdDennis Gilmore
This generic $bootcmd, and associated support macros, automatically searches a defined set of storage devices (or network protocols) for an extlinux configuration file or U-Boot boot script in various standardized locations. Distros that install such a boot config file/script in those standard locations will get easy-to-set-up booting on HW that enables this generic $bootcmd. Boards can define the set of devices from which boot is attempted, and the order in which they are attempted. Users may later customize this set/order by edting $boot_targets. Users may interrupt the boot process and boot from a specific device simply by executing e.g.: $ run bootcmd_mmc1 or: $ run bootcmd_pxe This patch was originally written by Dennis Gilmore based on Tegra and rpi_b boot scripts. I have made the following modifications since then: * Boards must define the BOOT_TARGET_DEVICES macro in order to specify the set of devices (and order) from which to attempt boot. If needed, we can define a default directly in config_distro_bootcmd.h. * Removed $env_import and related variables; nothing used them, and I think it's better for boards to pre-load an environment customization file using CONFIG_PREBOOT if they need. * Renamed a bunch of variables to suit my whims:-) Signed-off-by: Dennis Gilmore <dennis@ausil.us> Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Marek Vasut <marex@denx.de> Acked-by: Simon Glass <sjg@chromium.org>
2014-08-09rsa: Fix two errors in the implementationSimon Glass
1. Failure to set the return code correctly 2. Failure to detect the loop end condition when the value is equal to the modulus. Reported-by: Jeroen Hofstee <jeroen@myspectrum.nl> Signed-off-by: Simon Glass <sjg@chromium.org>
2014-08-09omap: clean-up dead configsMasahiro Yamada
The following configs are not defined at all. - CONFIG_OMAP1510 - CONFIG_OMAP_1510P1 - CONFIG_OMAP_SX1 - CONFIG_OMAP3_DMA - CONFIG_OMAP3_ZOOM2 - CONFIG_OMAP_INNOVATOR Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Tom Rini <trini@ti.com>
2014-08-09fdt: Sync up with libfdtSimon Glass
This brings in changes up to commit f9e91a48 in the libfdt repo. Mostly this is whitespace/minor changes. But there are a few new features: - fdt_size_cells() and fdt_address_cells() - fdt_resize() Signed-off-by: Simon Glass <sjg@chromium.org>
2014-08-09fdt: Rename fdt_resize() to fdt_shrink_to_minimum()Simon Glass
Since libfdt now has an fdt_resize() function, we need to rename the U-Boot one. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-08-09cosmetic: update doc/README.scrapyardMasahiro Yamada
- Add 'p1023rds' to the list since commit d0bc5140 dropped the board support but missed to update this file - Fill the Commit and Removed Date fields for boards removed by earlier commits - Move 'incaip' to keep the list sorted in reverse chronological order - Describe the soring rule in the comment block: "The list should be sorted in reverse chronological order." - Fix typos in the comment block Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-08-09ext4load: fix help textPavel Machek
Fix ext4load help text. Signed-off-by: Pavel Machek <pavel@denx.de>
2014-08-09git-mailrc: Add myself as dm maintainerSimon Glass
Add a subsystem entry for dm with myself as maintainer. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-08-09git-mailrc: Change fdt maintainerSimon Glass
Add myself as fdt maintainer. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-08-09net: BOOTP retry timeout improvementsStephen Warren
Currently, the BOOTP code sends out its initial request as soon as the Ethernet driver indicates "link up". If this packet is lost or not replied to for some reason, the code waits for a 1s timeout before retrying. For some reason, such early packets are often lost on my system, so this causes an annoying delay. To optimize this, modify the BOOTP code to have very short timeouts for the first packet transmitted, but gradually increase the timeout each time a timeout occurs. This way, if the first packet is lost, the second packet is transmitted quite quickly and hence the overall delay is low. However, if there's still no response, we don't keep spewing out packets at an insane speed. It's arguably more correct to try and find out why the first packet is lost. However, it seems to disappear inside my Ethenet chip; the TX chip indicates no error during TX (not that it has much in the way of reporting...), yet wireshark on the RX side doesn't see any packet. FWIW, I'm using an ASIX USB Ethernet adapter. Perhaps "link up" is reported too early or based on the wrong condition in HW, and we should add some fixed extra delay into the driver. However, this would slow down every link up event even if it ends up not being needed in some cases. Having BOOTP retry quickly applies the fix/WAR to every possible Ethernet device, and is quite simple to implement, so seems a better solution. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2014-08-09emif.h: remove duplicated argument to |maxin.john@enea.com
Remove the duplicated argument to | in two places. Reported by Coccinelle (http://coccinelle.lip6.fr/). Signed-off-by: Maxin B. John <maxin.john@enea.com>
2014-08-09vitesse: remove duplicated argument to ||maxin.john@enea.com
Remove the duplicated argument to || check Signed-off-by: Maxin B. John <maxin.john@enea.com>
2014-08-09board_r: Add missing return to initr_docIan Campbell
I happened to spot this while working in the area. Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Acked-by: Simon Glass <sjg@chromium.org> Cc: Simon Glass <sjg@chromium.org>
2014-08-09Makefile: use u-boot.map for binary_size_checkChris Packham
u-boot.map is generated automatically by the compiler and more importantly can handle addresses >4GB.
2014-08-09Makefile: use $(shell ...) for determining file_sizeChris Packham
file_size was being calculated using back-ticks but map_size uses $(shell ...). Update the file_size calculation to use $(shell ...). From: Jeroen Hofstee <jeroen@myspectrum.nl> The binary_size_check target relies on stat -c %s to return the size of u-boot.bin. This only works with GNU stat though. Use wc instead. Signed-off-by: Chris Packham <judge.packham@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-08-09pxe: clear Bootfile before returningStephen Warren
When "pxe boot" downloads the initrd/kernel/DTB, netboot_common() saves the downloaded filename to global variable BootFile. If the boot operation is aborted, this global state is not cleared. If "dhcp" is executed later without any arguments, BootFile is not cleared, and when the DHCP response is received, BootpCopyNetParams() writes the value into environment variable bootfile. This causes the following scenario: * Boot script executes dhcp; pxe get; pxe boot * User CTRL-C's the PXE menu, which causes the first menu item to be booted, which causes some file to be downloaded. (This boot-on-CTRL-C behaviour is arguably a bug too, but it's a separate bug and the bug this patch fixes would still exist if the user simply waited to press CTRL-C until "pxe boot" started downloading files) * User CTRL-C's the file downloads, but the filename is still written to the bootfile environment variable. * User re-runs the boot command, which in my case executes "dhcp; pxe get; pxe boot" again, and "dhcp" picks up the saved bootfile environment variable and proceeds to download a file that it shouldn't. To solve this, modify the implementation of "pxe get" to clear BootFile if the whole boot operation fails, which avoids this whole mess. An alternative would be to modify netboot_common() such that the no- arguments case explicitly clears the global variable BootFile. However, that would prevent the following command sequences from working: $ dhcp filename # downloads "filename" $ dhcp # downloads $bootfile, i.e. "filename" or: $ setenv bootfile filename $ dhcp # downloads $bootfile, i.e. "filename" ... and I assume someone relies on U-Boot working that way. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2014-08-09doc: README.android-fastboot: Add note about vendor IDBarnes, Clifton A
The Android fastboot client only communicates with specific vendor IDs. This addition to the documentation points out that fact so everyone is aware that not just any vendor ID will work and where to find the IDs that will. Signed-off-by: Clifton Barnes <cabarnes@indesign-llc.com> Cc: Rob Herring <robh@kernel.org>
2014-08-09ext4: trats: trats2: Modify dfu_alt_info's file names to have absolute pathŁukasz Majewski
After the clean up performed in the commit 1151b7ac10b81ecbb the DFU subsystem requires absolute patch for correct operation. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
generated by cgit v0.10.2 at 2024-11-07 08:41:55 (GMT)