summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-10-04serial: Add Zynq serial driverMichal Simek
The driver is used on Xilinx Zynq platform. Signed-off-by: Michal Simek <monstr@monstr.eu> CC: Joe Hershberger <joe.hershberger@gmail.com> CC: Marek Vasut <marex@denx.de> Acked-by: Marek Vasut <marex@denx.de>
2012-10-04arm: Fixed the offset for the no relocation.Zhong Hongbo
When the u-boot address of destination equal to __start, no relocation. relocation offset(r9) = 0. Signed-off-by: Zhong Hongbo <bocui107@gmail.com> Tested-by: Stefano Babic <sbabic@denx.de>
2012-10-04arm: Add CONFIG_OF_BOARD_SETUP support to bootmJoe Hershberger
ARM boards need to change device tree settings as well Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-10-04arm: Remove additional config flagsMichal Simek
These options are just duplicated from arch/arm/cpu/armv7/config.mk Signed-off-by: Michal Simek <monstr@monstr.eu>
2012-10-04armv7 cpu_init_crit: Simplify codeBenoît Thébaudeau
We don't need to return to cpu_init_crit after calling lowlevel_init, so lowlevel_init can directly return to the caller of cpu_init_crit. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net>
2012-10-04arm: work around assembler bugAllen Martin
Disable sibling call optimization based on binutils version. This is to work around a bug in the assember in binutils versions < 2.22. Branches to weak symbols can be incorrectly optimized in thumb mode to a short branch (b.n instruction) that won't reach when the symbol gets preempted. http://sourceware.org/bugzilla/show_bug.cgi?id=12532 Signed-off-by: Allen Martin <amartin@nvidia.com> Acked-by: Tom Rini <trini@ti.com>
2012-10-04tools, config.mk: add binutils-versionAllen Martin
Modeled after gcc-version, add function to get binutils version. Signed-off-by: Allen Martin <amartin@nvidia.com> Acked-by: Wolfgang Denk <wd@denx.de>
2012-10-04ARM: increase lmb stack space reservation to 4KBRob Herring
The bootm initrd image copy to ram can collide with the stack in cases where the print buffer size is large (i.e. 1K). The result is intermittent initrd decompression errors depending on the initrd size MOD 4KB since the initrd start address is 4KB aligned. Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-10-04ARM: Add X600 board support (SPEAr600 based)Stefan Roese
This patch adds support for the X600 SPEAr600 based board. Its also the first SPEAr600 board that uses the newly introduced SPEAr600 SPL support. Xloader is not necessary any more. By using the new "u-boot.spr" make target, one image will generated containing both, U-Boot SPL (with mkimage header as needed by the SPEAr BootROM, and the main U-Boot with mkimage header. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Amit Virdi <amit.virdi@st.com> Cc: Vipin Kumar <vipin.kumar@st.com>
2012-10-04ext4: Rename block group descriptor table from gd to bgdSimon Glass
On x86 machines gd is unfortunately a #define, so we should avoid using gd for anything. This patch changes uses of gd to bgd so that ext4fs can be used on x86. A better fix would be to remove the #define in x86, but I'm not sure how to do that. Signed-off-by: Simon Glass <sjg@chromium.org>
2012-10-03Output strings from echo with puts where easyJoe Hershberger
Change echo to puts characters together where it knows about them together. This improves netconsole performance by greatly reducing the number of packets that are sent. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-10-03Add a command to access the system timerJoe Hershberger
Two sub-commands... start and get. * start sets the reference. * get prints out the time since the last start (in "<sec>.<msec>" format). If get is called without start, returns time since boot. Simple way to benchmark an operation: "timer start;<commands-to-measure>;timer get" Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-10-03Add a new "ini" commandJoe Hershberger
This allows you to read ini-formatted data from anywhere and then import one of the sections into the environment This is based on rev 16 at http://code.google.com/p/inih/ Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-10-03Cleanup cache command printsJoe Hershberger
Only print when queried, not every time the setting is changed. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-10-03Fix checkpatch.pl complaints in cmd_cache.cJoe Hershberger
Old code that is not compliant. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-10-03net: fix netconsole filteringJoe Hershberger
Adjustment of Michael Walle's fix patch Commit 8a0eccb1056b313b45ab62e3aac400f339aa71b4 breaks netconsole. src_ip must not be converted to host byte order, because nc_ip is already stored in network byte order (see string_to_ip(), called by getenv_IPaddr()). Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-10-03Add parameter to md5sum to save the md5 sumJoe Hershberger
Add a parameter that allows you to store the md5 sum to either a memory location or a variable. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-10-03Implement verify option for md5sum commandJoe Hershberger
Loosely based on CONFIG_CRC32_VERIFY. The sum to verify against can be in memory, in a variable, or the last parameter to the function directly. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-10-03Add parameter to sha1sum to save the SHA1 sumJoe Hershberger
Add a parameter that allows you to store the SHA1 sum to either a memory location or a variable. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-10-03Implement verify option for sha1sum commandJoe Hershberger
Loosely based on CONFIG_CRC32_VERIFY. The sum to verify against can be in memory, in a variable, or the last parameter to the function directly. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-10-03Change dead code in "test" cmd to debug outputJoe Hershberger
Improve debug output for test by indicating the number of parameters and quoting the parameters to make it clear exactly what each contains Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-10-03Allow runtime configuration of "zero-delay" checkJoe Hershberger
Define the new "-2" value for bootdelay to mean autoboot with no delay and don't check for an abort key (while "0" value means do check). Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-10-03Merge remote-tracking branch 'u-boot-marvell/master'Albert ARIBAUD
2012-10-03lsxl: also turn off fan in power down modeMichael Walle
If while booting the power switch is in OFF position, turn off the fan, too. Signed-off-by: Michael Walle <michael@walle.cc> Cc: Prafulla Wadaskar <prafulla@marvell.com>
2012-10-03km_kirkwood: enable MV88E6352_SWITCH support for kmnusaValentin Longchamp
This is required to configure the external 88e6352 switch on nusa. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> cc: Holger Brunck <holger.brunck@keymile.com> cc: Prafulla Wadaskar <prafulla@marvell.com> Acked-by: Prafulla Wadaskar <Prafulla@marvell.com>
2012-10-03arm/km: add mv88e6352 configuration for kmnusaValentin Longchamp
The kmnusa board uses a mv88e6352 switch that is connected to the main eth interface of the kirkwood. Therefore the switch must be configured so that the kirkwood's egiga eth inferface can be used. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> Cc: Holger Brunck <holger.brunck@keymile.com> Cc: Prafulla Wadaskar <prafulla@marvell.com> Acked-By: Prafulla Wadaskar <prafulla@marvell.com>
2012-10-03edminiv2: increase malloc len to 256KAlbert ARIBAUD
Malloc len of 128K caused a warning from ehci_hcd asking for more. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net> Acked-by: Prafulla Wadaskar <prafulla@marvell.com>
2012-10-03ARM: kirkwood/orion5x: Use reset_cpu definition in include/common.hDinh Nguyen
include/common.h has the reset_cpu defined already. No need to re-define here. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Signed-off-by: Pavel Machek <pavel@denx.de> Acked-By: Prafulla Wadaskar <Prafulla@marvell.com>
2012-10-03kirkwood: ib62x0: Invert SATA activity LEDsSimon Baatz
The hardware design of the IB-NAS62x0 causes the SATA activity LEDs to be on when idle by default. Reverse the polarity of the activity LEDs in early init. Signed-off-by: Simon Baatz <gmbnomis@gmail.com> Cc: Luka Perkov <uboot@lukaperkov.net> Cc: Prafulla Wadaskar <prafulla@marvell.com> Acked-by: Luka Perkov <uboot@lukaperkov.net>
2012-10-03arm/km: use kw_sdram_size_adjust to adjust SDRAM sizeHolger Brunck
Some boards may differ only in the SDRAM size. This function allows to fix the size accordingly and we can use the same u-boot binary for both boards. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com> cc: Prafulla Wadaskar <prafulla@marvell.com> cc: Valentin Longchamp <valentin.longchamp@keymile.com>
2012-10-03kirkwood: implement kw_sdram_size_adjustGerlando Falauto
Size of the SDRAM chips might differ between any two (otherwise identical) instances of the same board. So add a function kw_sdram_size_adjust() which reads out the current ram size for a given bank, and adjusts the Kirkwood's SDRAM window size register accordingly. Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com> Signed-off-by: Holger Brunck <holger.brunck@keymile.com> cc: Prafulla Wadaskar <prafulla@marvell.com> cc: Valentin Longchamp <valentin.longchamp@keymile.com>
2012-10-03kirkwood: implement kw_sdram_bs_set()Gerlando Falauto
Some boards might be equipped with different SDRAM configurations. When that is the case, CPU CS Window Size Register (CS[0]n Size) should be set to the biggest value through board.cfg file; then its value can be fixed at runtime according to the detected SDRAM size. Therefore, implement kw_sdram_bs_set(). Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com> Signed-off-by: Holger Brunck <holger.brunck@keymile.com> cc: Prafulla Wadaskar <prafulla@marvell.com> cc: Valentin Longchamp <valentin.longchamp@keymile.com> cc: Marek Vasut <marex@denx.de> Acked-by: Prafulla Wadaskar <Prafulla@marvell.com>
2012-10-03kirkwood: use c-struct for access to SDRAM addr decode registersHolger Brunck
Remove the defines and do this with a C-struct. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> cc: Prafulla Wadaskar <prafulla@marvell.com> cc: Valentin Longchamp <valentin.longchamp@keymile.com> cc: Gerlando Falauto <gerlando.falauto@keymile.com> cc: Marek Vasut <marex@denx.de> Acked-By: Prafulla Wadaskar <Prafulla@marvell.com>
2012-10-03kirkwood: add support for Iomega iConnect boardLuka Perkov
Add support for new board iConnect from Iomega. More information about the device can be found here: http://go.iomega.com/en/products/network-storage-desktop/wireless-data-station/network-hard-drive-iconnect/?partner=4735 Signed-off-by: Luka Perkov <uboot@lukaperkov.net> Tested-by: Wojciech Dubowik <wojciech.dubowik@neratec.com> Tested-by: Tim Fletcher <tim@night-shade.org.uk>
2012-10-03kirkwood: fix mpp.h coding styleLuka Perkov
Signed-off-by: Luka Perkov <uboot@lukaperkov.net>
2012-10-03ARM: add support for d2 Network v2Simon Guinot
This patch adds support for the LaCie board d2 Network v2 which share a lot of hardware caracteristics with the 2Big Network v2. - CPU: Marvell 88F6281 1200Mhz - SDRAM memory: 256MB DDR2 400Mhz - 2 SATA ports: internal and eSATA - Gigabit ethernet: PHY Marvell 88E1116R - Flash memory: SPI NOR 512KB (Macronix MX25L4005A) - i2c EEPROM: 512 bytes (24C04 type) - 2 USB2 ports: host and host/device - 1 push button - 1 power switch - 1 SATA LED (bi-color, blue and red) Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
2012-10-03ARM: add support for Network Space v2 Lite and MiniSimon Guinot
This patch adds support for the LaCie boards Network Space v2 (Lite and Mini). This two boards are derived from the Network Space v2 and a lot of hardware caracteristics are shared. - CPU: Marvell 88F6192 800Mhz - SDRAM memory: 128MB DDR2 200Mhz - 1 SATA port: internal - Gigabit ethernet: PHY Marvell 88E1318 - Flash memory: SPI NOR 512KB (Macronix MX25L4005A) - i2c EEPROM: 512 bytes (24C04 type) - 2 USB2 ports (Lite only): host and host/device - 1 push button - 1 SATA LED (bi-color, blue and red) Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
2012-10-03lacie_kw: add support for EFI partitionsSimon Guinot
Defines CONFIG_EFI_PARTITION for LaCie boards. Additionally this patch defines CONFIG_DOS_PARTITION. Note that this definition is implicit in mv_common.h when CONFIG_CMD_USB is enabled. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
2012-10-03ARM : Add support for MINI2440 (s3c2440).Gabriel Huau
Support of the MINI2440 board from FriendlyARM from an old version of u-boot : http://repo.or.cz/r/u-boot-openmoko/mini2440.git Currently, supporting only boot from NOR. Signed-off-by: Gabriel Huau <contact@huau-gabriel.fr>
2012-10-03ARM : Add GPIO Driver and IOMUX definition for S3C2440Gabriel Huau
It's now possible to use the gpio driver interface for s3c2440. This patch add iomux definitions too. Signed-off-by: Gabriel Huau <contact@huau-gabriel.fr>
2012-10-03rmobile: Fix build timer driver with BUILD_DIRNobuhiro Iwamatsu
Rmobile common timer driver diverts the same driver as SH architecture. When it builds at the same place with source, it is no problem, but when it builds out of source, it cannot build. This patch revises this problem. Reported-by: Albert ARIBAUD <albert.u.boot@aribaud.net> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
2012-10-03i2c: sh: Remove irq_wait functionNobuhiro Iwamatsu
irq_wait function is not referred to from anywhere. Reported-by: Albert ARIBAUD <albert.u.boot@aribaud.net> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
2012-10-03doc/git-mailrc: Add 'rmobile' aliasNobuhiro Iwamatsu
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2012-10-03rmobile: Add READMENobuhiro Iwamatsu
This add README of Renesas RMOBILE. Based doc/README.omap3. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Acked-by: Tom Rini <trini@ti.com>
2012-10-03rmobile: armadillo-800eva: Remove CONFIG_SYS_NO_L2CACHENobuhiro Iwamatsu
armadillo-800eva needs this config. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2012-10-03rmobile: armadillo-800eva: Add Support NFS and BOOTZ commandNobuhiro Iwamatsu
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2012-10-03rmobile: armadillo-800eva: Add Support CONFIG_OF_LIBFDTNobuhiro Iwamatsu
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2012-10-03rmobile: armadillo-800eva: Change init function of SCIFA1Nobuhiro Iwamatsu
This initializes GPIO, without using PFC framework in board_early_init_f function. It is because it cannot initialize normally when PFC is used. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2012-10-03arm: rmobile: Add cpu_eth_init functionNobuhiro Iwamatsu
This supports ethernet driver of RMOBILE R8A7740. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2012-10-03arm: rmobile: armadillo-800eva Remove board_eth_initNobuhiro Iwamatsu
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
generated by cgit v0.10.2 at 2024-07-26 22:09:53 (GMT)