summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-07-22h2200: Disable SHA256 on FIT imagesTom Rini
This board is close in binary size to one of its hard limits, so disable SHA256 FIT image support to gain some breathing room. Signed-off-by: Tom Rini <trini@ti.com>
2014-07-22lib/time.c cleanupsPavel Machek
As I initially suspected overflow in time handling, I took a detailed look at lib/time.c. This adds comments about units being used, reduces amount of type casting being done, and makes __udelay() always wait at least one tick. (Current code could do no delaying at all for short delays). Signed-off-by: Pavel Machek <pavel@denx.de>
2014-07-22common: cmd_ide: use __weak and add prototypesJeroen Hofstee
clang chokes about the concept of having an alias to an always_inlined function. gcc likely just ignores the always inlined since binary sizes are equal before and after this patch. Convert the aliases to weak functions and provide missing prototypes. cc: Pavel Herrmann <morpheus.ibis@gmail.com> Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-07-22common: cmd_ide: remove PIO modeJeroen Hofstee
Since no board defines CONFIG_TUNE_PIO this is just dead code, so remove it. cc: Pavel Herrmann <morpheus.ibis@gmail.com> Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-07-22serial: ns16550: use a const variable instead of macroMasahiro Yamada
Just for type checking. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Marek Vasut <marex@denx.de> Acked-by: Marek Vasut <marex@denx.de>
2014-07-22serial: ns16550: use DIV_ROUND_CLOSEST macro to compute the divisorMasahiro Yamada
The function still returns the same value. The comment block is no longer necessary because our intention is clear enough by using DIV_ROUND_CLOSEST() macro. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-07-22serial: ns16550: drop CONFIG_OMAP1610 from the special caseMasahiro Yamada
If CONFIG_OMAP1610 is defined, the code returning the fixed value (26) is enabled. But this case is covered by the following code. (CONFIG_SYS_NS16550_CLK + (gd->baudrate * (MODE_X_DIV / 2))) / (MODE_X_DIV * gd->baudrate) = (48000000 + (115200 * (16 / 2))) / (16 * 115200) = 48921600 / 1843200 = 26 The "#ifdef CONFIG_OMAP1610" was added by commit 6f21347d more than ten years ago. In those days, the divide-and-round was not used. I guess that is why this weird code was added here. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Tom Rini <trini@ti.com> Cc: Rishi Bhattacharya <rishi@ti.com>
2014-07-22bootp can use mdelayPavel Machek
Cleanup bootp code by using mdelay. Signed-off-by: Pavel Machek <pavel@denx.de> Acked-by: Marek Vasut <marex@denx.de>
2014-07-22spl: nand: read only in the size of image_header on the first accessMasahiro Yamada
For the same reason as in commit 50c8d66d, all the remaining CONFIG_SYS_NAND_PAGE_SIZE in common/spl/spl_nand.c can be replaced with sizeof(*header). Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Tim Harvey <tharvey@gateworks.com> Cc: Scott Wood <scottwood@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
2014-07-22catch wrong load address passed to fatload / ext2loadPavel Machek
If filename is passed instead of address to ext2load or fatload, u-boot silently accepts that, and uses 0 for load address and default filename from environment. That is confusing, display help instead. Signed-off-by: Pavel Machek <pavel@denx.de>
2014-07-22Fix help text of ext2load and fatload.Pavel Machek
Fix help text of ext2load and fatload to match code in fs/fs.c Signed-off-by: Pavel Machek <pavel@denx.de> Reviewed-by: Marek Vasut <marex@denx.de>
2014-07-22tools: compiler.h: add missing time.hJeroen Hofstee
genimg_print_time uses time_t, but time.h is never included. Linux gets away with this since types.h includes time.h. Explicitly include the header file so building on e.g. FreeBSD also works. cc: Tom Rini <trini@ti.com> Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-07-22driver/usb: include upper/lower_32_bits() from linux/compat.hLijun Pan
upper_32_bits() and lower_32_bits() have been ported into linux/compat.h. Start use them now in drivers/usb/host/xhci.h. Signed-off-by: Lijun Pan <Lijun.Pan@freescale.com>
2014-07-22linux/compat.h: port lower_32_bits and upper_32_bits from LinuxLijun Pan
[backport from linux commit 204b885e and 218e180e7] 64 bit processors are becomming more and more popular. lower_32_bits and upper_32_bits save our labor doing shifts/manipulations like (u32)(n) and (u32)((n) >> 32). They are good helpers in both little and big endian cases. Port these two functions here from Linux:include/linux/kernel.h, cater the comment message to little/big endian cases. Later on, developers could include linux/compat.h if they want to use these two functions. Signed-off-by: Lijun Pan <Lijun.Pan@freescale.com>
2014-07-22sparc: merge LEON2 and LEON3 linker scriptsMasahiro Yamada
There is only one line diff between LEON2 and LEON3 linker scripts: - arch/sparc/cpu/leon2/start.o (.text) + arch/sparc/cpu/leon3/start.o (.text) They can be written in the same way: */start.o (.text) So, board/gaisler/grsim_leon2/u-boot.lds and arch/sparc/cpu/leon3/u-boot.lds can be merged into arch/sparc/cpu/u-boot.lds. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Daniel Hellstrom <daniel@gaisler.com>
2014-07-22sparc: merge LEON3 linker scriptsMasahiro Yamada
The linker scripts of LEON3 - board/gaisler/grsim/u-boot.lds - board/gaisler/gr_cpci_ax2000/u-boot.lds - board/gaisler/gr_ep2s60/u-boot.lds - board/gaisler/gr_xc3s_1500/u-boot.lds are the same (except cosmetic differences such as indentation). This commit merges them into arch/sparc/cpu/leon3/u-boot.lds. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Daniel Hellstrom <daniel@gaisler.com>
2014-07-22esd:cmd_loadpci.c: Switch from "do_source" to "source"Tom Rini
Rather than calling do_source directly (which is not officially exported from cmd_source.c) call 'source' which is exported and requires a little less code to do so as well. Signed-off-by: Tom Rini <trini@ti.com>
2014-07-21Merge branch 'master' of git://git.denx.de/u-boot-i2cTom Rini
2014-07-18common: cmd_mii: fix printf format warningJeroen Hofstee
The and operator implicitly upcasts the value to int, hence the format should expect an int type as well. (and make checkpatch happy) Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-07-18autoboot: add its own headerJeroen Hofstee
Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-07-18board: rpi_b: include mmc header and fix prototypeJeroen Hofstee
While at it add fdt_support.h as well. cc: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-07-18mmc: prevent some warnings with make W=1Jeroen Hofstee
Add missing prototypes for global functions and make local functions static. cc: panto@antoniou-consulting.com Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-07-18common: env_common: make env_get_char_spec __weakJeroen Hofstee
Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-07-18yaffs2: preprocessor cleanupJeroen Hofstee
Current code uses the preprocessor to change an else case to a statement without any if condition at all. Although this works, change the optional code to return early, so all optional code is contained within a single #ifdef. Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-07-18yaffs2: cosmetic: remove self assignmentsJeroen Hofstee
Remove self assignments which is just dead code to prevent compiler warnings about non used arguments. For u-boot this does not prevent any warning though, on the contrary it actual introduces warnings when compiling with clang. Remove them. Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-07-18common: bootm_os: make arch_preboot_os __weakJeroen Hofstee
Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-07-18dirvers: mmc: use __weakJeroen Hofstee
use weak instead of alias to prevent some clang warnings. Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-07-18lib:vsprintf: reduce scope of pack_hex_byteJeroen Hofstee
pack_hex_byte is only used when CONFIG_CMD_NET is defined so limit it to that scope. This prevents a clang warning. Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-07-18env_callback.h: spl: mark callback as maybe_unusedJeroen Hofstee
When static inline is used in a header file the function should preferably be inlined and if not possible made a static function. When declared inside a c file there is a static function, which might be inlined. Since SPL uses a define to declare the static inline it becomes part of the c file although it is declared in a header and clang will warn that you have introduced unused static functions. Add maybe_unused to prevent such warnings. Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-07-18lib:sha1: remove unused constantJeroen Hofstee
This prevents a clang warning. Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-07-18common: main.c: make show_boot_progress __weakJeroen Hofstee
This not only looks a bit better it also prevents a warning with W=1 (no previous prototype). Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl> Acked-by: Simon Glass <sjg@chromium.org>
2014-07-18lib:lmb: use __weakJeroen Hofstee
This not only looks a bit better it also prevents a warning with W=1 (no previous prototype). Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-07-18common:splash: use __weakJeroen Hofstee
This not only looks a bit better it also prevents a warning with W=1 (no previous prototype). cc: agust@denx.de Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-07-18dm: add missing includesJeroen Hofstee
lists.c / root.c do not include their own header and they could potentially implement a different function. Therefore actually include the headers. cc: sjg@chromium.org Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl> Acked-by: Simon Glass <sjg@chromium.org>
2014-07-18common: board_f: cosmetic use __weak for ledsJeroen Hofstee
First of all this looks a lot better, but it also prevents a gcc warning (W=1), that the weak function has no previous prototype. cc: Simon Glass <sjg@chromium.org> Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl> Acked-by: Simon Glass <sjg@chromium.org>
2014-07-18common: commands: make commands staticJeroen Hofstee
Since most commands are not public, make them static. This prevents warnings that no common prototype is available. Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-07-18lib: div64: add missing includeJeroen Hofstee
Include the function its prototype to prevent the warning that it has no prototype. Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-07-18mtd: cfi_flash: fix clang warningJeroen Hofstee
clang warns this check is silly; it is since s is a local variable. u-boot/drivers/mtd/cfi_flash.c:2363:13: warning: comparison of array 's' not equal to a null pointer is always true else if ((s != NULL) && (strcmp(s, "yes") == 0)) { cc: Stefan Roese <sr@denx.de> Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-07-16fsl_i2c: add support for 3rd and 4th I2CShengzhou Liu
Add support for 3rd and 4th I2C. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
2014-07-16i2c, omap24xx: add i2c deblock sequenzHeiko Schocher
If a bus busy is detected when intializing the driver, toggle 9 times the scl pin. Therefore enable the test mode of the controller, in which the scl, sda pins can be controlled manually. Tested on the siemens boards pxm2, rut and dxr2. Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Tom Rini <trini@ti.com> Cc: Hannes Petermaier <oe5hpm@oevsv.at> Cc: Lubomir Popov <lpopov@mm-sol.com> Cc: Steve Sakoman <steve@sakoman.com> Cc: Sandeep Paulraj <s-paulraj@ti.com> Cc: Vincent Stehlé <v-stehle@ti.com> Cc: Samuel Egli <samuel.egli@siemens.com>
2014-07-14Prepare v2014.07Tom Rini
Signed-off-by: Tom Rini <trini@ti.com>
2014-07-14socfpga: timer actually counts downPavel Machek
Timer on cyclone5 actually counts down. It took me a while to figure out, as timer counting in wrong direction actually _can_ be used, it just appears to tick at extremely high frequency in u-boot. The bug was introduced in commit 23ab7ee0ffa9d5efd0b4ad830befba306d24a327. Signed-off-by: Pavel Machek <pavel@denx.de> Acked-by: Marek Vasut <marex@denx.de>
2014-07-14ARM: DRA7xx: Update the board_name env variableLokesh Vutla
Update the board_name env variable and accordingly populate the dtb file. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2014-07-14boards.cfg: change "<none>" in the board field to "-"Masahiro Yamada
In the previous commit, all the board fields were filled. Now we can use "-" in the board field for a different meaning. Going forward, "-" stands for no board directory as in cpu, soc, vendor fields. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-07-14boards.cfg: keep it sorted filling the board fieldMasahiro Yamada
The boards.cfg file has allowed to use "-" for the board (= 6th) field if the board name is the same as the 7th field. But I notice one problem. Because tools/reformat.py sorts the lines in the simple alphabetical order (= the order of character code), some entries for the same board are not lined up together. For example, "bf527-ezkit" and "bf527-ezkit-v2" share the same board. But they are located separately because "bf527-ezkit" fills the board field with "-" whereas "bf527-ezkit-v2" specifies it explicitely. The similar things can be seen: - between "trizepsive" and "polaris" - between "RRvision" and "RRvision_LCD" - between "korat" and "korat_perm" - between "lwmon5" and "lcd4_lwmon5" This commit was generated by the following command: awk '$6 == "-" { $6 = $7 } { print }' boards.cfg \ | tools/reformat.py -i -d '-' -s 8 > boards0.cfg; \ mv boards0.cfg boards.cfg Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-07-11Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini
2014-07-10i.MX6DL/S: add drive-strength back to pads DISP0_DAT2/DAT10Eric Nelson
The pad settings for DISP0_DATA02 and DISP0_DAT10 were not set in the same way as DISP0_DAT00-23, causing much flicker in parallel RGB displays on Dual-Lite and Solo processors. These settings now match the i.MX6 Dual and Quad core versions. Note that this fixes a regression in commit b47abc3 and that this is the second time we've had a regression on these two pads (See commit e654ddf). Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br>
2014-07-09usb: phy: omap_usb_phy: implement usb_phy_power() for AM437xFelipe Balbi
Newer AM437x silicon requires us to explicitly power up the USB2 PHY. By implementing usb_phy_power() we can achieve that. Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-07-09usb: host: xhci: make sure to power up PHYFelipe Balbi
some boards won't work if the PHY isn't explicitly powered up. Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-07-09doc: Add zynq fragment to git-mailrc fileMichal Simek
This is a MIME GnuPG-signed message. If you see this text, it means that your E-mail or Usenet software does not support MIME signed messages. The Internet standard for MIME PGP messages, RFC 2015, was published in 1996. To open this message correctly you will need to install E-mail or Usenet software that supports modern Internet standards. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
generated by cgit v0.10.2 at 2024-11-07 05:39:25 (GMT)