summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-08-02arm64: zynqmp: Do not setup time if already setupMichal Simek
Newer psu_init_gpl.c/h contain clock setup. Detect if reference clock is active. If yes, skip timer setup. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-08-02arm64: zynqmp: Fix SVD mask for getting chip IDMichal Simek
Mask should start from the first bit - using 0xe is just wrong. 3bits are used that's why 0x7 mask is correct. This patch is fixing silicon ID code detection. Previous behavior was that bit0 was completely ignored. Issue was found on 2eg chip detection. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-08-02arm64: zynqmp: Add Kconfig option for adding psu_init to binaryMichal Simek
There is a need to include psu_init also in mini u-boot configuration that's why handle psu_init via Kconfig property. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-08-02arm64: zynqmp: Call psu_init from board_early_init_fMichal Simek
For some mini platforms there could be a need to include psu_init. That's why move it to board file instead of spl only file. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-08-02arm64: zynqmp: Remove ifdef around zynqmp mmio read and write rotuinesSiva Durga Prasad Paladugu
This patch removes ifdef around mmio read and write rotuines and make them a single routine by checking the current el. This patch helps to remove ifdef around invoke_smc as well. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-08-02arm64: zynqmp: Define a way to intialize TCMSiva Durga Prasad Paladugu
TCM on ZynqMP needs to be intialized in a sequence and this patch provides a global routine to perform this as per requirement. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-08-02arm64: zynqmp: Provide a Kconfig option to define OCM and TCM in MMUSiva Durga Prasad Paladugu
This patch provides an option to include OCM and TCM memory into MMU table with corresponding memory attributes. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-08-02fpga: xilinx: Avoid using local intermediate bufferSiva Durga Prasad Paladugu
Dont use local temporary buffer for printing out the info instead use directly from memroy. This fixes the issue of stack corruprion due to local buffer overflow. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-08-02clk: zynqmp: Remove unused macros/variablesMichal Simek
These macros and one variable is not used anywhere that's why they should be removed. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-02clk: zynqmp: Dont panic incase of mmio write/read failuresSiva Durga Prasad Paladugu
Dont panic incase of mmio write/read failures instead return error and let the peripheral driver take care of clock get and set failures. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-02clk: zynqmp: Add support for CCF driverSiva Durga Prasad Paladugu
Add support for CCF, this CCF reads the ref clocks from dt and checks all the required clock control registers for its source , divisors and calculates the clock from them. This supports clock and set functions. Panic when read/write fails. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-02common: board_f: Make reserve_mmu a weak functionSiva Durga Prasad Paladugu
Make reserve_mmu a weak so that it provides an option to customize this routine as per platform need Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-02zynq: Add Z-Turn boardAlexander Graf
The Z-Turn board is a low cost development board based on the Xilinx Zynq SoC. While it's powerful and quite versatile, it so far lacked upstream support. This patch adds basic support for the Z-Turn. It does however for now miss enablement for MIO51 reset which means that USB and ethernet don't work. For that either FSBL or SPL need to be adjusted. The SPL part will follow later. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-08-02zynq: Enable distro bootAlexander Graf
Distro boot allows devices to boot using standardized boot methods by default. This can be very handy for distributions that want to run on different platforms. This patch moves the zynq platform to use its old, zynq specific boot method first and then fall back to distro boot. That way supporting Linux distributions like openSUSE is much easier. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-08-02zynq: Add EFI runtime sections to linker scriptAlexander Graf
When using EFI_LOADER, we add a few special sections for runtime code and data which get relocated on demand when executing a target OS. These runtime structures need to get annotated properly in the linker script. While we do that properly in the generic one, we missed out on the zynq specific linker script. This patch adds the EFI runtime section annotations into the zynq linker script so that the efi loader code actually works on that platform. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-08-02arm: zynq: Label whole PL part as fpga_full regionMichal Simek
This will simplify dt overlay structure for the whole PL. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Moritz Fischer <moritz.fischer@ettus.com>
2017-08-01Prepare v2017.09-rc1Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-07-31configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2017-07-31configs: Migrate CMD_NAND*Tom Rini
Migrate all remaining instances of CMD_NAND, CMD_NAND_TRIMFFS CMD_NAND_LOCK_UNLOCK and CMD_NAND_TORTURE from the headers into the defconfig files. Tested-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-07-31dm: console: Check for serial devices properlySimon Glass
With driver model the serial device is often not called "serial". Mark driver-model stdio devices so that they can be detected and we can look up the uclass. This is a more reliable way of finding out whether the console is connected to a serial device or not. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-07-31console: Unify the check for a serial consoleSimon Glass
Put the check for whether a console is a serial device in a function so that we can share the code in the two places that use it. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-07-31arm: mach-omap2: Align image address before cache operationsAndrew F. Davis
The image address passed to secure_boot_verify_image() may not be cacheline aligned, round the address down to the nearest cacheline. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2017-07-31ti: Default to ENV_IS_IN_FAT if MMC_OMAP_HSTom Rini
When we have MMC available we assume that we want to put the env as a file on FAT. Cc: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2017-07-31am335x_hs_evm: Disable CONFIG_SPL_ENV_SUPPORTTom Rini
The main uses of CONFIG_SPL_ENV_SUPPORT are for network support and for disabling "Falcon Mode" support at run-time. As this build enables neither, remove this feature. Cc: Andrew F. Davis <afd@ti.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-31env: Migrate CONFIG_ENV_IS_IN_FAT options to KconfigTom Rini
We rename the various FAT_ENV_xxx options to CONFIG_ENV_FAT_xxx so that they can be modified via Kconfig. Migrate all existing users to the new values. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-07-31Remove unused CONFIG_TWL4030_PWMAdam Ford
CONFIG_TWL4030_PWM is not being used by any source, so let's remove the #define and the whitelist entry Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-07-31serial: stm32x7: Convert CONFIG_STM32X7_SERIAL to KconfigPatrice Chotard
Add CONFIG_STM32X7_SERIAL as a Kconfig option. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Vikas Manocha <vikas.manocha@st.com>
2017-07-31dm: Kconfig: fix typo in help for SPL_PINCTRLPhilipp Tomsich
Changes 'controlloers' to 'controllers' in the help-text for SPL_PINCTRL. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-07-31efi_loader: Fix warning in efi_gopAlexander Graf
Commit ca9193d2b16 ("efi_loader: gop: fixes for CONFIG_DM_VIDEO without CONFIG_LCD") dropped the explicit (void*) cast for fb_base in efi gop support for CONFIG_LCD without DM. This patch adds it back, eliminating the now occuring warning again Fixes: ca9193d2b16 ("efi_loader: gop: fixes for CONFIG_DM_VIDEO without CONFIG_LCD") Reported-by: Tom Rini <trini@konsulko.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-07-31Merge tag 'signed-efi-next' of git://github.com/agraf/u-bootTom Rini
Patch queue for efi - 2017-07-29 A lot of EFI greatness this time around. Thanks a lot to the two amazing new contributors Heinrich Schuchardt and Rob Clark we now gain - stable objects across multiple bootefi invocations - fixes for shim - fixes for ipxe - protocol installation - device path conversion to/from text - working "lsefi" support in grub - working notifiers - various bug fixes
2017-07-30x86: minnowmax: Remove CONFIG_SMSC_LPC47MBin Meng
There is no SMSC LPC47M Super I/O chipset on the MinnowMax board. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-07-30x86: acpi: Don't touch hardware on HW reduced platformsAndy Shevchenko
If ACPI HW reduced bit in FADT is set we should ignore any ACPI hardware communications. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-07-30x86: acpi: Export acpi_fill_mcfg() with __weak attributeAndy Shevchenko
Some platforms might require different approach when filling memory mappings configuration table. Allow them to override the common method. At the same time export acpi_create_mcfg_mmconfig(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-07-30x86: acpi: Deduplicate acpi_fill_madt() implementationAndy Shevchenko
In Baytrail and Quark support code acpi_fill_madt() is identical. Deduplicate its implementation by moving to lib/acpi_tables.c. At the same time mark acpi_fill_madt() with __weak attribute to keep a possibility to override it in platform code Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-07-30x86: acpi: Name fields in FADT in accordance with specificationAndy Shevchenko
ACPI specification defines FADT fields marked as reserved in U-Boot. Name these fields in accordance with ACPI specification. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-07-30x86: acpi: Fill OEM revisionAndy Shevchenko
Fill OEM revision field in the tables by U-Boot build date. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-07-30Makefile: Export build date as integerAndy Shevchenko
In some cases we would need build date as integer value. Export U_BOOT_BUILD_DATE as %Y%m%d integer value. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-07-30Makefile: Don't shadow actual error when compile ASLAndy Shevchenko
If ASL compiler failed by any reason do not produce output C file. Otherwise sequential run of make will shadow the actual error in ASL, i.e. CC board/intel/edison/dsdt.o board/intel/edison/dsdt.c:1:1: error: unterminated comment /* and user has to remove dsdt.c and run make in order to see the error again. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2017-07-30x86: conga-qeval20-qa3-e3845.dts: Enable xHCI support in dtsStefan Roese
Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-07-30x86: dfi-bt700: Add xHCI USB supportStefan Roese
Change from EHCI to xHCI on the DFI BayTrail SoM. The xHCI USB hub is connected to an GPIO on the DFI BayTrail SoM. For correct operation, it needs to get reset upon power-up. Otherwise it may happen that the hub is not detected after a software reboot. This patch also configures this GPIO in the dts for correct operation. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-07-30x86: conga-qeval20-qa3-e3845: Select CONFIG_BOARD_LATE_INITStefan Roese
This config option is needed on the congatec x86 BayTrail board, as otherwise the USB hub will not get initialized correctly. This patch selects this Kconfig option again. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-07-30x86: theadorable-x86-dfi-bt700: Add Spansion SPI support and move VIDEO blobStefan Roese
To support the Spansion SPI NOR flashes, this patch enables the support in defconfig. This increases the U-Boot binary too much so that it does not fit into its area in the ROM. So also move the VIDEO BIOS blob a bit to make some space here. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-07-30x86: Add Intel Edison board filesAndy Shevchenko
Add Intel Edison board which is using U-Boot. The patch is based on work done by the following people (in alphabetical order): Aiden Park <aiden.park@intel.com> Dukjoon Jeon <dukjoon.jeon@intel.com> eric.park <eric.park@intel.com> Fabien Chereau <fabien.chereau@intel.com> Felipe Balbi <felipe.balbi@linux.intel.com> Scott D Phillips <scott.d.phillips@intel.com> Sebastien Colleur <sebastienx.colleur@intel.com> Steve Sakoman <steve.sakoman@intel.com> Vincent Tinelli <vincent.tinelli@intel.com> In case we're building for Intel Edison, we must have 4096 bytes of zeroes in the beginning on u-boot.bin. This is done in board/intel/edison/config.mk. First run sets hardware_id environment variable which is read from System Controller Unit (SCU). Serial number (serial# environment variable) is generated based on eMMC CID. MAC address on USB network interface is unique to the board but kept the same all over the time. Set mac address from U-Boot using following scheme: OUI = 02:00:86 next 3 bytes of MAC address set from eMMC serial number This allows to have a unique mac address across reboot and flashing. Signed-off-by: Vincent Tinelli <vincent.tinelli@intel.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> [bmeng: Add MAINTAINERS file for Intel Edison board] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-07-30x86: Add Intel Tangier supportFelipe Balbi
Add Intel Tangier SoC support. Intel Tangier SoC is a core part of Intel Merrifield platform. For example, Intel Edison board is based on such platform. The patch is based on work done by the following people (in alphabetical order): Aiden Park <aiden.park@intel.com> Dukjoon Jeon <dukjoon.jeon@intel.com> eric.park <eric.park@intel.com> Fabien Chereau <fabien.chereau@intel.com> Scott D Phillips <scott.d.phillips@intel.com> Sebastien Colleur <sebastienx.colleur@intel.com> Steve Sakoman <steve.sakoman@intel.com> Vincent Tinelli <vincent.tinelli@intel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Vincent Tinelli <vincent.tinelli@intel.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-07-30x86: Add dma-mapping.h to architectural codeAndy Shevchenko
Some cross-platform drivers rely on this header present. Make it so for x86. It's just a copy'n'paste of arch/arm/include/asm/dma-mapping.h. Suggested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-07-30watchdog: Introduce watchdog driver for Intel TangierFelipe Balbi
Add watchdog driver for Intel Tangier based platforms. Signed-off-by: Vincent Tinelli <vincent.tinelli@intel.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-07-30arch/x86: Select USB before selecting host driverAndy Shevchenko
Kbuild complains if USB is not selected before any of host driver. warning: (X86) selects USB_EHCI_HCD which has unmet direct dependencies (USB) warning: (X86) selects USB_EHCI_HCD which has unmet direct dependencies (USB) Select it for X86. Fixes: 64d6ac5bc4a9 ("Kconfig: USB: Migrate CONFIG_USB_EHCI_HCD users to Kconfig") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> [bmeng: Update all x86 boards' defconfig files to remove CONFIG_USB] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-07-29Merge git://git.denx.de/u-boot-socfpgaTom Rini
2017-07-29Merge git://git.denx.de/u-boot-usbTom Rini
2017-07-28efi_loader: indent entry/exit prints to show nesting levelRob Clark
This should make it easier to see when a callback back to UEFI world calls back in to the u-boot world, and generally match up EFI_ENTRY() and EFI_EXIT() calls. Signed-off-by: Rob Clark <robdclark@gmail.com> [agraf: remove static from const var] Signed-off-by: Alexander Graf <agraf@suse.de>
generated by cgit v0.10.2 at 2024-07-12 11:16:01 (GMT)