summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-09-16Convert CONFIG_SPL_MTD_SUPPORT to KconfigSimon Glass
Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-16Convert CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT to KconfigSimon Glass
Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-16Convert CONFIG_SPL_MMC_SUPPORT to KconfigSimon Glass
Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-16Convert CONFIG_SPL_LIBGENERIC_SUPPORT to KconfigSimon Glass
Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-16Convert CONFIG_SPL_LIBDISK_SUPPORT to KconfigSimon Glass
Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-16Convert CONFIG_SPL_LIBCOMMON_SUPPORT to KconfigSimon Glass
Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-16Convert CONFIG_SPL_I2C_SUPPORT to KconfigSimon Glass
Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-16Convert CONFIG_SPL_GPIO_SUPPORT to KconfigSimon Glass
Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-16Convert CONFIG_SPL_FAT_SUPPORT to KconfigSimon Glass
Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-16Convert CONFIG_SPL_EXT_SUPPORT to KconfigSimon Glass
Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-16Convert CONFIG_SPL_ETH_SUPPORT to KconfigSimon Glass
Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-16Convert CONFIG_SPL_ENV_SUPPORT to KconfigSimon Glass
Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-16Convert CONFIG_SPL_DRIVERS_MISC_SUPPORT to KconfigSimon Glass
Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-16Convert CONFIG_SPL_DMA_SUPPORT to KconfigSimon Glass
Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-16Convert CONFIG_SPL_HASH_SUPPORT to KconfigSimon Glass
Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-16Convert CONFIG_SPL_CRYPTO_SUPPORT to KconfigSimon Glass
Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-16spear: Use upper case for CONFIG optionsSimon Glass
There are a few options which use lower case. We should use upper case for all CONFIG options. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Add usbtty/nand hunk to include/configs/spear3xx_evb.h] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-09-16Move existing use of CONFIG_SPL_RSA to KconfigSimon Glass
A few boards define this in a header file which is incorrect. It means that Kconfig options that rely on this cannot be used. Move it. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-16Move existing use of CONFIG_SPL_DM to KconfigSimon Glass
A few boards define this in a header file which is incorrect. It means that Kconfig options that rely on this cannot be used. Move it. Note that quite a few boards defined this options but do not appear to actually use SPL: BSC9132QDS_NOR_DDRCLK100_SECURE BSC9132QDS_NOR_DDRCLK133_SECURE BSC9132QDS_SDCARD_DDRCLK100_SECURE BSC9132QDS_SDCARD_DDRCLK133_SECURE BSC9132QDS_SPIFLASH_DDRCLK100_SECURE BSC9132QDS_SPIFLASH_DDRCLK133_SECURE C29XPCIE_NOR_SECBOOT P1010RDB-PA_36BIT_NAND_SECBOOT P1010RDB-PA_36BIT_SPIFLASH_SECBOOT P1010RDB-PA_NAND_SECBOOT P1010RDB-PA_NOR_SECBOOT P1010RDB-PB_36BIT_NOR_SECBOOT P1010RDB-PB_36BIT_SPIFLASH_SECBOOT P1010RDB-PB_NAND_SECBOOT P1010RDB-PB_NOR_SECBOOT P3041DS_SECURE_BOOT P4080DS_SECURE_BOOT P5020DS_NAND_SECURE_BOOT P5040DS_SECURE_BOOT T1023RDB_SECURE_BOOT T1024QDS_DDR4_SECURE_BOOT T1024QDS_SECURE_BOOT T1024RDB_SECURE_BOOT T1040RDB_SECURE_BOOT T1042D4RDB_SECURE_BOOT T1042RDB_SECURE_BOOT T2080QDS_SECURE_BOOT T2080RDB_SECURE_BOOT T4160QDS_SECURE_BOOT T4240QDS_SECURE_BOOT ls1021aqds_nor_SECURE_BOOT ls1021atwr_nor_SECURE_BOOT ls1043ardb_SECURE_BOOT For these boards CONFIG_SPL_DM will no-longer be defined in SPL. But since they apparently don't have an SPL, this should not matter. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-16Kconfig: tpl: Add some TPL support options to KconfigSimon Glass
Some of the SPL options have TPL equivalents. Add these to Kconfig so that we can convert these options over to work from Kconfig. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-16Kconfig: spl: Add SPL support options to KconfigSimon Glass
There are a lot of SPL options in U-Boot to enable various features and drivers. Currently these do not use Kconfig. Add them to Kconfig along with suitable help, and drop them from the README. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-16Use separate options for TPL supportSimon Glass
At present TPL uses the same options as SPL support. In a few cases the board config enables or disables the SPL options depending on whether CONFIG_TPL_BUILD is defined. With the move to Kconfig, options are determined for the whole build and (without a hack like an #undef in a header file) cannot be controlled in this way. Create new TPL options for these and update users. This will allow Kconfig conversion to proceed for these boards. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-16Drop CONFIG_SPL_RAM_SUPPORTSimon Glass
This option does not exist in U-Boot. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-16arm: fsl: Adjust ordering of #ifndef CONFIG_SPL_BUILDSimon Glass
The secure boot header files incorrectly define SPL options only if CONFIG_SPL_BUILD is defined. This means that the options are only enabled in an SPL build, and not with a normal 'make xxx_defconfig'. This means that moveconfig.py cannot work, since it sees the options as disabled even when they may be manually enabled in an SPL build. Fix this by changing the order. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-16Kconfig: Move SPL settings into their own fileSimon Glass
Move the SPL settings into common/spl where most of the SPL code is kept. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-16moveconfig: Add an option to commit changesSimon Glass
The moveconfig tool is quite clever and generally produces results that are suitable for sending as a patch without further work. The main required step is to add the changes to a commit. Add an option to do this automatically. This allows moveconfig to be used from a script to convert multiple CONFIG options, once per commit. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-16moveconfig: Add an option to skip promptsSimon Glass
At present it is not easy to use moveconfig from a script since it asks for user input a few times. Add a -y option to skip this and assume that 'y' was entered. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-16Correct defconfigs using savedefconfigSimon Glass
Update the defconfig files to match their canonical form, as produced by 'make safedefconfig'. This is the result of running 'tools/moveconfig.py -s' on the tree. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-13i2c: at91_i2c: Fix the wrong include fileWenyou Yang
Since the 'clk_client.h' doesn't exist, it should be 'clk.h'. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-09-13rockchip: i2c: fix >32 byte writesJohn Keeping
The special handling of the chip address and register address must only happen before we send the data buffer, otherwise we will end up inserting both of these every 32 bytes. Signed-off-by: John Keeping <john@metanate.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-09-13rockchip: i2c: move register write out of inner loopJohn Keeping
There is no point in writing intermediate values to the txdata registers. Also add padding to the debug logging to make it easier to read when there are leading zeroes. Signed-off-by: John Keeping <john@metanate.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-09-13rockchip: i2c: use named constant when appropriateJohn Keeping
Make it clear that we are using the same value in two adjacent lines. Signed-off-by: John Keeping <john@metanate.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-09-12Prepare v2016.09Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-09-12sf: fix sf probeCyrille Pitchen
This patch fixes the "sf probe" command. The very first SPI flash probe passes, for instance when u-boot tries to read its environment settings from a (Q)SPI memory but next "sf probe" commands fail because the flash memory node is unbound from the SPI controller children nodes. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Tested-by: Stefan Roese <sr@denx.de> Tested-by: Hannes Schmelzer <oe5hpm@oevsv.at> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-09-09common, kconfig: move VERSION_VARIABLE to KconfigHeiko Schocher
move VERSION_VARIABLE from board config file into a Kconfig option. Signed-off-by: Heiko Schocher <hs@denx.de>
2016-09-09Merge branch 'master' of git://git.denx.de/u-boot-netTom Rini
2016-09-09cmd: Rework disk.c usageTom Rini
We only need the function found in cmd/disk.c when we have IDE, SCSI or USB_STORAGE enabled. While the first two are easy to get right, in the 3rd case we assume that the set of cases where we do have USB and do not enable USB_STORAGE are small enough that we can take the small bloat of un-discarded strings on gcc prior to 6.x Signed-off-by: Tom Rini <trini@konsulko.com>
2016-09-09configs: Migrate CONFIG_USB_STORAGETom Rini
In some cases we were missing CONFIG_USB=y so enable that when needed. Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2016-09-09net: asix: Fix AX88772B when used with DriverModelJoshua Scott
A previous patch (net: asix: fix operation without eeprom) added a two-byte shift to the packet buffer when receiving a packet on the AX88772B. This shift was not included when the driver was updated to work with DriverModel. Testing on a Marvell DB-88F6820-ACM showed that the adapter was not functioning correctly (EHCI timeouts). This patch brings the two-byte shift to the DriverModel implementation of ops->recv (asix_eth_recv). Testing on the same board, we were able to TFTP a file over and confirm that the crc32 was correct. Signed-off-by: Joshua Scott <joshua.scott@alliedtelesis.co.nz> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-09-09Revert "net: nfs: Correct the reply data buffer size"Joe Hershberger
This reverts commit 6279b49e6c2fdaf8665355d1777bc90cd41fcf90. This caused a bad data crc. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reported-by: Guillaume GARDET <guillaume.gardet@free.fr>
2016-09-09Revert "net: nfs: Use the tx buffer to construct rpc msgs"Joe Hershberger
This reverts commit 998372b4798fd7ebb666f571950df925b8d80f69. This caused a data abort on some platform. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reported-by: Guillaume GARDET <guillaume.gardet@free.fr>
2016-09-09configs: Resync with savedefconfigTom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-09-09Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini
2016-09-07board: ks2: README: Update to add K2G supportLokesh Vutla
Update the README to add support for K2G EVM. Also - Add steps on how to use MMC boot - Fix load address when using CCS - Update build target to u-boot.bin from u-boot-dtb.bin as all ks2 platforms uses DT. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2016-09-07efi_loader: provide efi_mem_desc versionMian Yousaf Kaukab
Provide version of struct efi_mem_desc in efi_get_memory_map(). EFI_BOOT_SERVICES.GetMemoryMap() in UEFI specification v2.6 defines memory descriptor version to 1. Linux kernel also expects descriptor version to be 1 and prints following warning during boot if its not: Unexpected EFI_MEMORY_DESCRIPTOR version 0 Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@gmail.com>
2016-09-07image-fit: switch ENOLINK to ENOENTJonathan Gray
ENOLINK is not required by POSIX and does not exist on OpenBSD and likely other systems. Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
2016-09-07compiler.h: use system endian macros on OpenBSDJonathan Gray
The u-boot endian macros map directly to system endian macros on OpenBSD. Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
2016-09-07board: am57xx: Fix missing check for beagle_x15Nishanth Menon
When beagleboard-X15 is booted, we see the following log: Unidentified board claims BBRDX15_ in eeprom header This is because of the missing check for x15 (the default) and reports an error for a valid board configuration. Fix the same. Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2016-09-07board: am57xx: MAINTAINERS: Update for current maintainerNishanth Menon
Felipe Balbi has move on from TI and the current email ID is no longer valid. So, replacing with Lokesh. While at it, update missing config file which was untracked. Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-09-07global_data.h: Standardize tabs and alignment for commentsRobert P. J. Day
Line up comments for readibility. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
generated by cgit v0.10.2 at 2024-11-06 01:18:06 (GMT)