summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-10-12x86: Clean up unused macros in the configuration headersBin Meng
Legacy video driver macros are not needed. Clean them up. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-12video: Remove legacy VESA and coreboot framebuffer driversBin Meng
Now that all x86 boards have been converted to DM video, drop the legacy drivers. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-12x86: coreboot: Convert to use DM coreboot video driverBin Meng
This converts coreboot to use DM framebuffer driver. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-12dm: video: Don't do anything in alloc_fb() when plat->size is zeroBin Meng
With DM VESA driver on x86 boards, plat->base/size/align are all zeroes and starting address passed to alloc_fb() happens to be 1MB aligned, so this routine does not trigger any issue. On QEMU with U-Boot as coreboot payload, the starting address is within 1MB range (eg: 0x7fb0000), thus causes failure in video_post_bind(). Actually if plat->size is zero, it makes no sense to do anything in this routine. Add such check there. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-12dm: video: Add driver for coreboot framebuffer deviceBin Meng
This adds a DM driver for coreboot framebuffer device. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-12vbe: Make vbe_setup_video_priv() publicBin Meng
vbe_setup_video_priv() might be useful to other drivers. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-12x86: doc: Correct qfw command exampleBin Meng
The kernel load address for zboot should be 0x1000000. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-12x86: Convert to use DM VESA video driverBin Meng
At present only chromebook boards are converted to DM video. Other x86 boards are still using the legacy cfb_console driver. This switches to use DM version drivers. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-12dm: video: Output verbose information in vbe_setup_video()Bin Meng
With DM conversion, information like "Video: 1024x768x16" is not shown anymore. Now add these verbose output back. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-12dm: video: Add driver for VESA-compatible deviceBin Meng
This adds a DM driver for VESA-compatible device. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-12x86: doc: Document coreboot framebuffer driver issue on QEMUBin Meng
For some unknown reason, coreboot framebuffer driver never works on QEMU since day 1. It seems the driver only works on real hardware. Document this issue. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-11x86: mrccache: Fix error handling in mrccache_get_region()Simon Glass
This should return normal errors, not device-tree errors. Fix it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-10-11x86: Drop unused init_helper functionsSimon Glass
Drop init_bd_struct_r() which is no-longer used. Also drop the declaration for init_func_spi() since this is now handled by generic board init. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-10-11x86: ivybridge: Tidy up enable_clock_gating() for 64-bitSimon Glass
Fix the hex case and remove unused brackets. Use ~0U instead of ~0UL to allow compilation on 64-bit machines. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-10-11x86: ivybridge: Fix PCH power setupSimon Glass
At present pch_power_options() has the arguments to writel() around the wrong way. Fix this and update it to compile on 64-bit machines. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-10-11x86: Don't export interrupt handlers with x86_64Simon Glass
We don't have a way of adjusting these at present so it is best to refuse to export these functions. This can be implemented later if the API is required. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-10-11x86: i2c: Fix cast of address to 32-bit valueSimon Glass
This gives a build warning on 64-bit x86. Fix it. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Heiko Schocher <hs@denx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-10-11x86: Correct address casts in interrupt codeSimon Glass
We should cast an address to unsigned long, not u32. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-10-11x86: Correct address casts in cpu codeSimon Glass
We should cast an address to unsigned long, not u32. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-10-11x86: Allow interrupts to be disabled in 64-bit modeSimon Glass
Update the code to support both 32-bit and 64-bit modes. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-10-11usb: pci: Fix cast for 64-bit compilationSimon Glass
Fix a cast that causes warnings on 64-bit machines. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-10-11tpm: Tidy up use of size_tSimon Glass
We should consistently use %z with size_t, and avoid passing a uint32_t as a size_t value. Fix these issues to avoid warnings on 64-bit machines. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-10-11rtc: Use CONFIG_X86 instead of __I386__Simon Glass
For 64-bit x86, __I386__ should perhaps not be defined. It is not clear from the definition, but let's use CONFIG_X86 to be sure. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-10-11elf: Add the Elf64_Rela typeSimon Glass
Add this so that we can support 64-bit relocation on x86. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-10-11board_f: Drop the extra fdtdec_prepare_fdt()Simon Glass
This is already called earlier, from fdtdec_setup(), so drop this unnecessary call from the init sequence. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-10-11bios_emulator: Fix cast for 64-bit compilationSimon Glass
Fix a cast that causes warnings on 64-bit machines. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-10-11Add _image_binary_end section declarationSimon Glass
This is used in some link scripts, so add a declaration for it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-10-11dm: x86: Move link to use driver model for videoSimon Glass
Update the configuration to use the new driver. Drop the existing plumbing code and unused header files. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-10-11dm: x86: Move samus to use new driver model supportSimon Glass
Update the samus driver to avoid the direct call to the video BIOS setup. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-10-11x86: Adjust config to support DM_VIDEOSimon Glass
Update the common configuration so that it works correctly when CONFIG_DM_VIDEO is enabled. This involves dropping the legacy CONFIG_VIDEO option and changing the stdio device from "vga" to "vidconsole". Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-10-11dm: x86: video: Add a driver-model driver for ivybridge graphicsSimon Glass
At present we use the legacy vesa driver for graphics. Add a driver which supports driver model. This can be probed only when needed, removing the need to start up the display if it is not used. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-10-11dm: video: Add driver-model support to vesa graphicsSimon Glass
Provide a function to run the Vesa BIOS for a given PCI device and obtain the resulting configuration (e.g. display size) for use by the video uclass. This makes it easier to write a video driver that uses vesa and supports driver model. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-10-11dm: stdio: Allow lazy probing of video devicesSimon Glass
At present all video devices are probed on start-up. It would be better to probe a device only when it is needed. This can happen if it is referenced in the stdout environment variable, for example. Add support for this by searching for a suitable device when needed, probing it, and finding the stdio device it creates. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-10-11x86: video: Fix typo in broadwell KconfigSimon Glass
'enabled' should be 'enables'. Fix it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-10-11dm: core: Add a function to get a uclass nameSimon Glass
It is useful in debug() statements to display the name of the uclass for a device. Add a simple function to provide this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-10-11list: Add list_last_entry() to find the last entrySimon Glass
We have list_first_entry() but in some cases it is useful to find the last item added to the list. Add a macro for this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-10-11Fix return value in trailing_strtoln()Simon Glass
This function should return -1 if there is no trailing integer in the string. Instead it returns 0. Fix it by checking for this condition at the start. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-10-11x86: Add an accelerated memmove() functionSimon Glass
Bring in a faster memmove() from Linux 4.7. This speeds up scrolling on the display. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2016-10-11Revert "x86: broadwell: gpio: Remove the codes to set up pin control"Simon Glass
This makes the assumption that setting up pinctrl in cpu_init_r() is safe. On samus we need GPIOs before relocation in order to support power control. This commit fixes the following message on boot: initcall sequence ffe5c6f4 failed at call ffe01d3d (err=-1) ### ERROR ### Please RESET the board ### In any case it seems better to leave init to driver model, so that it can pick up the GPIO driver when it needs it. Since pinctrl is a dependency of the GPIO driver, we may as well put the dependency there and avoid these problems. This reverts commit 9769e05bcf79939bad23a719982dd1f85a110f3c. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-10-11x86: Fix Linux v4.7+ zimage booting (update bootparam.h)Stefan Roese
Booting Linux kernel v4.7+ does not work since Linux kernel commit 974f221c "x86/boot: Move compressed kernel to the end of the decompression buffer". This patch adds the latest version of the setup_header struct, adding "init_size" which is needed since this commit referenced above. With this patch, booting Linux v4.8-rc8 does work again on x86 boards. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2016-10-11x86: baytrail: Add 2nd eMMC controller to the PCI probe listStefan Roese
With this addition, the eMMC device available on the congatec and DFI BayTrail SoM is detected correctly. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-10-11x86: conga-qeval20-qa3: Add README to explain the console UART optionsStefan Roese
This patch adds a small README to explain the 2 defconfig files and its usage for the different console UART options. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Cc: Simon Glass <sjg@chromium.org>
2016-10-08Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini
2016-10-08ARM: AM437X: Add Silicon ID supportLokesh Vutla
Add silicon ID code for AM437x silicon. This can be used to print the cpu info using CONFIG_DISPLAY_CPUINFO. Also printing "CPU :" along with cpu name in order to be consistent with other OMAP platforms. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2016-10-08spl: saveenv: adding saveenv support in SPLB, Ravi
By default saveenv option is not supported for SPL. This patch enable the support for save environment variable for SPL build. Enable save environment support in SPL after setenv. By default the saveenv option is not provided in SPL, but some boards need this support in 'Falcon' boot, where SPL need to boot from different images based on environment variable set by OS. For example OS may set "reboot_image" environment variable to "recovery" inorder to boot recovery image by SPL. The SPL read "reboot_image" and act accordingly and change the reboot_image to default mode using setenv and save the environemnt. Signed-off-by: Ravi Babu <ravibabu@ti.com> Reviewed-by: Simon Glass <sig@chromium.org> change in v1: - dropped SUPPORT, use CONFIG_SPL_SAVEENV - updates the comments in mmc_private.h
2016-10-08cros_ec: Honor the google,remote-bus dt propertyMoritz Fischer
Boards where ECs that use a I2C port != 0 specify this in the devicetree file via the google,remote-bus property. Previously this was ignored and hardcoded to port 0. Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com> Cc: Simon Glass <sjg@chromium.org> Cc: Heiko Schocher <hs@denx.de> Cc: u-boot@lists.denx.de Acked-by: Simon Glass <sjg@chromium.org>
2016-10-08board: ti: dra7xx: complex definitions should be protected with parenthesesMugunthan V N
As a standard practice complex definitions should be protected with parentheses, as it might fail when used in a complex if statements. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-08ARM: dts: dra72: add rev C evm supportMugunthan V N
Add DTS support for dra72 evm Rev C which has the following changes * Two ethernet ports now instead of the single one in rev B. * DP83867 ethernet phy instead of DP838865. Cc: Vignesh R <vigneshr@ti.com> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-08arm: Add return value argument to longjmpAlexander Graf
The normal longjmp command allows for a caller to pass the return value of the setjmp() invocation. This patch adds that semantic to the arm implementation of it and adjusts the efi_loader call respectively. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-08env: tool: add command line option to input lockfile pathB, Ravi
The default lockname is set to /var/lock. This limits the usage of this application where OS uses different lockfile location parameter. For example, In case of android, the default lock path location is /data. Hence by providing the command line option to input lockfile path will be useful to reuse the tool across multiple operating system. usage: ./fw_printenv -l <lockfile path> Signed-off-by: Ravi Babu <ravibabu@ti.com>
generated by cgit v0.10.2 at 2024-11-20 12:28:29 (GMT)