summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2006-07-19Add support for TB5200 boardWolfgang Denk
The TB5200 ("Tinybox") is a small baseboard for the TQM5200 module integrated in a little aluminium case. Patch by Martin Krause, 8 Jun 2006 Some code cleanup
2006-07-18Enable buffered flash writes for TQM5200 board.Wolfgang Denk
2006-07-13Merge with /home/tur/proj/usb_sticks/u-bootWolfgang Denk
2006-07-13Update CHANGELOGWolfgang Denk
2006-07-13Merge with /home/mk/11-cmb1920/u-bootWolfgang Denk
2006-07-13Cleanup duplicate definitions in MCC200 config file.Wolfgang Denk
2006-07-13Fix problems with SanDisk Corporation Cruzer Micro USB memory stick.Bartlomiej Sieka
2006-07-12Add support for TQM885D board.Markus Klotzbuecher
Patch by Martin Krause, 20 Mar 2006 Signed-off-by: Martin Krause <martin.krause@tqs.de>
2006-07-12Bugfix in FEC initialisation:Markus Klotzbuecher
All MII configuration is done via FEC1 registers. But MII_SPEED was configured according to FEC used. So if only FEC2 was used, this caused the real MII_SPEED register in FEC1 to stay uninitalised, what lead to "mii_send STUCK!" messages. Fix: always configure MII_SPEED on FEC1 only.
2006-07-12Support for spc1920 board.Markus Klotzbuecher
Patch by Markus Klotzbuecher, 12 Jul 2006
2006-07-10MCC200 board: support console on any one of the Quad UART ports.Wolfgang Denk
2006-07-10Fix error in flash protection calculation on MCC200 board.Wolfgang Denk
2006-07-10Major PCMCIA Cleanup to make code better readable and maintainable.Wolfgang Denk
Notes: - Board-dependend code for RPXLITE and RPXCLASSIC-based boards placed to the drivers/rpx_pmcia.c file to avoid duplication. Same for TQM8xx-based boards (drivers/tqm8xx_pmcia.c). - drivers/i82365.c has been split into two parts located at board/atc/ti113x.c and board/cpc45/pd67290.c (ATC and CPC45 are the only boards using CONFIG_82365). - Changes were tested for clean build and *very* *few* boards.
2006-07-06MCC200: map the 2nd Quad UART into the processor's address space.Wolfgang Denk
2006-07-06Fix timer problems on AMCC yucca board.Marian Balakowicz
Set Timer Clock Select to use CPU clock as a timer input source.
2006-07-05Bring yucca config more in line with other AMCC boards.Wolfgang Denk
2006-07-05Merge with /home/m8/git/u-bootWolfgang Denk
2006-07-04Add AMCC bamboo board to MAKEALL build script.Marian Balakowicz
2006-07-03Fix AMCC bamboo eval board compilation errors.Marian Balakowicz
2006-07-03Add system memory to the PCI region list for AMCC PPC44x CPUs.Marian Balakowicz
Enabled it for Yucca board.
2006-07-03Cleanup config file and bootup output for Yucca board.Marian Balakowicz
2006-06-30Fix CHANGELOGWolfgang Denk
2006-06-30Merge with /home/m8/git/u-bootWolfgang Denk
2006-06-30Fix CONFIG_440_GX define usage.Marian Balakowicz
2006-06-30Remove autogenerated bmp_logo.h file.Marian Balakowicz
2006-06-30Merge: Add support for AMCC 440SPe CPU based eval board (Yucca).Marian Balakowicz
2006-06-30Add support for AMCC 440SPe CPU based eval board (Yucca).Marian Balakowicz
2006-06-30Call serial_initialize() before first debug() is used.Marian Balakowicz
2006-06-26Cleanup trab board for GCC-4.xWolfgang Denk
2006-06-19Merge with /home/hs/U-Boot/u-boot-devWolfgang Denk
2006-06-19Add support for wrPPMC7xx/74xx boardsHeiko Schocher
Patch from Richard Danter, 12 Aug 2005
2006-06-18Merge with ssh://atlas/home/wd/git/u-boot/workWolfgang Denk
2006-06-18Merge with ssh://fifi/home/wd/git/u-boot/masterWolfgang Denk
2006-06-16Add support for gth2 boardWolfgang Denk
Patch by Thomas Lange, Aug 11 2005
2006-06-16Add support for CONFIG_SERIAL_MULTI on MPC5xxxWolfgang Denk
Patch by Martin Krause, 8 Jun 2006 This patch supports two serial consoles on boards with a MPC5xxx CPU. The console can be switched at runtime by setting stdin, stdout and stderr to the desired serial interface (serial0 or serial1). The PSCs to be used as console port are definded by CONFIG_PSC_CONSOLE and CONFIG_PSC_CONSOLE2. See README.serial_multi for details.
2006-06-16Bugfix in I2C initialisation on S3C2400.Wolfgang Denk
If the bus is blocked because of a previously interrupted transfer, up to eleven clocks are generated on the I2CSCL line to complete the transfer and to free the bus. With this fix pin I2CSCL (PG6) is really configured as GPIO so the clock pulses are really generated. Patch by Martin Krause, 04 Apr 2006
2006-06-16Fix DDR6 errata on TQM834x boardsWolfgang Denk
Patch by Thomas Waehner, 07 Mar 2006
2006-06-16Remove obsolete flash driver board/tqm5200/flash.cWolfgang Denk
Patch by Martin Krause, 11 Jan 2006
2006-06-16Update configuration for CMC-PU2 boardWolfgang Denk
Patch by Martin Krause, 17 Nov 2005
2006-06-16Add support for PS/2 keyboard on TQM85xx boardWolfgang Denk
Patch by Martin Krause, 07 Nov 2005 Tested on a STK85XX baseboard. Make sure the PS/2 controller has been programmed. Jumper Settings: X66 1-2, 9-10; X61 2-3
2006-06-16Fix TRAB channel switching delay for trab_fkt.bin standalone applikationWolfgang Denk
Patch by Martin Krause, 08 Nov 2005 In tsc2000_read_channel() the delay after setting the multiplexer to a temperature channel is increased from 1,5 ms to 10 ms. This is to allow the multiplexer inputs to stabilize after huge steps of the input signal level.
2006-06-16Adjust TQM5200 make targetsWolfgang Denk
Make the automatic CS configuration the default. The dedicated configurations CONFIG_TQM5200_AA, CONFIG_TQM5200_AB and CONFIG_TQM5200_AC are removed. "TQM5200_config" is now the default for STK52XX.200 base boards. On a STK52XX.100 base board "TQM5200_STK100_config" must be used. Patch by Martin Krause, 07 Nov 2005
2006-06-16Fix setting of environment variable "ver" on trab boardWolfgang Denk
The environment variable "ver" is now set before do_auto_update() is called, so that "ver" can be used in USB update scripts. Patch by Martin Krause, 27 Oct 2005
2006-06-16Fix wrong usage of udelay() in led_blink() on trab boardWolfgang Denk
Patch by Martin Krause, 27 Oct 2005
2006-06-16Fix udelay bug in vfd.c for trab boardWolfgang Denk
Patch by Martin Krause, 27 Oct 2005
2006-06-16Disable JFFS2 support for trab boardWolfgang Denk
Patch by Martin Krause, 27 Oct 2005
2006-06-16Change mtdparts definition on trab board to match current flash mapWolfgang Denk
Patch by Martin Krause, 27 Oct 2005
2006-06-14Fix memory init problems on MCC200 boardWolfgang Denk
2006-06-14Fix IxEthDB.h to compile againStefan Roese
Patch by Stefan Roese, 14 Jun 2006
2006-06-13Minor cleanup for PCS440EP boardStefan Roese
Patch by Stefan Roese, 13 Jun 2006
generated by cgit v0.10.2 at 2024-09-19 21:27:34 (GMT)