summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-04-14Introduce phys_size_t and move phys_addr_t into asm/types.hKumar Gala
Also add CONFIG_PHYS_64BIT on powerpc to deal with 32-bit ppc's that have larger physical addresses like 44x, 85xx, and 86xx. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-14Rename include/md5.h to include/u-boot/md5.hAndy Fleming
Some systems have md5.h installed in /usr/include/. This isn't the desired file (we want the one in include/md5.h). This will avoid the conflict. This fixes the host tools building problem by creating a new directory for U-Boot specific header files. [Patch by Andy Fleming, modified to use separate directory by Wolfgang Denk] Signed-off-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Andy Fleming <afleming@freescale.com> Acked-by: Timur Tabi <timur@freescale.com>
2008-04-13drivers: code clean upDave Liu
Signed-off-by: Dave Liu <daveliu@freescale.com>
2008-04-13drivers: clean up the ata_piix.hDave Liu
Signed-off-by: Dave Liu <daveliu@freescale.com>
2008-04-13doc: english polishing for README.sataDave Liu
according to gvb's suggestion, polishing for the doc. Signed-off-by: Jerry Van Baren <gerald.vanbaren@ge.com> Signed-off-by: Dave Liu <daveliu@freescale.com>
2008-04-13Fix warnings introduced by I2C bus speed setting patchKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-13Altera Stratix II supporteran liberty
Adds Support for Altera's Stratix II. Within your board specific init file you will have to call 1. fpga_init (/* relocated code offset. usually => */ gd->reloc_off); 2. fpga_add (fpga_altera, (Altera_desc*)&altera_desc); Altera_desc* contines (for example): { Altera_StratixII, /* part type */ passive_serial, /* interface type */ 1, /* bytes of data part can accept */ (void *)(&funcs), /* interface function table */ 0L, /* base interface address */ 0 /* implementation specific cookie */ } funcs is the interface. It is of type altera_board_specific_func. It looks like this: altera_board_specific_func func = { pre_fn, config_fn, status_fn, done_fn, clk_fn, data_fn, abort_fn, post_fn, }; you will have to implement these functions, which is usually bit banging some gpio. Signed-off-by: Eran Liberty <liberty@extricom.com>
2008-04-13Update CHANGELOGWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-04-13Phytec Phycore-i.MX31 supportSascha Hauer
This patch adds support for the Phytec Phycore-i.MX31 board Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
2008-04-13mx31 litekit supportSascha Hauer
This patch adds support for the mx31 litekit board Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
2008-04-13add an i2c driver for mx31Sascha Hauer
This patch adds an i2c driver for Freescale i.MX processors Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
2008-04-13core support for Freescale mx31Sascha Hauer
This patch adds the core support for Freescale mx31 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
2008-04-13Fix compile errorWolfgang Denk
...as suggested by Peter Pearse Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-04-13Separate omap24xx specific code from arm1136Sascha Hauer
Move omap24xx code to cpu/arm1136/omap24xx, rename include/asm-arm/arch-arm1136 to cpu/arm1136/omap24xx. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
2008-04-13disable caches before booting an app for Blackfin appsMike Frysinger
It isn't generally save to execute applications outside of U-Boot with caches enabled due to the way the Blackfin processor handles caches (requires software assistance). This patch disables caches before booting an ELF or just booting raw code. The previous discussion on the patch was that we wanted to use weaks instead, but that proved to not be feasible when multiple symbols are involved, which puts us back at the ifdef solution. I've minimized the ugliness by moving the setup step outside of the main function. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2008-04-13ppc: Get rid of unused machine type definitionsWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-04-13Coding Style cleanup; update CHANGELOGWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-04-13Merge branch 'master' of /home/wd/git/u-boot/custodiansWolfgang Denk
2008-04-13Merge branch 'master' of git://www.denx.de/git/u-boot-cfi-flashWolfgang Denk
2008-04-13Merge branch 'master' of git://www.denx.de/git/u-boot-mpc83xxWolfgang Denk
2008-04-13Merge branch 'master' of git://www.denx.de/git/u-boot-mpc85xxWolfgang Denk
2008-04-13Merge branch 'master' of git://www.denx.de/git/u-boot-ppc4xxWolfgang Denk
2008-04-13Merge branch 'master' of git://www.denx.de/git/u-boot-microblazeWolfgang Denk
2008-04-13Merge branch 'master' of git://www.denx.de/git/u-boot-sparcWolfgang Denk
2008-04-13LM73 bug fix for negative temperatures and cleanupLarry Johnson
When the LM73 temperature sensor measures a temperature below 0 C, the current driver does not perform sign extension, so the result returned is 512 C too high. This patch fixes the problem, and does general cleanup of the code. Signed-off-by: Larry Johnson <lrj@acm.org>
2008-04-12cfi_flash: Support buffered writes on non-standard Spansion NOR flashGuennadi Liakhovetski
Some NOR flash chip from Spansion, for example, the s29ws-n MirrorBit series require different addresses for buffered write commands. Define a configuration option to support buffered writes on those chips. A more elegant solution would be to automatically detect those chips by parsing their CFI records, but that would require introduction of a fixup table into the cfi_flash driver. Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
2008-04-11mpc83xx: Update DIMM data bus width test to support 40-bit widthLee Nipper
32-bit wide ECC memory modules report 40-bit width. Changed the DIMM data bus width test to 'less than 64' instead of 'equal 32'. Signed-off-by: Lee Nipper <lee.nipper@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-04-11mpc83xx: Fix the bug of serdes initializationDave Liu
Currently the serdes will not be initializated due to the partid's error. Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-04-11mpc83xx: Fix the SATA clock setting of 837x targetsDave Liu
Currently the SATA controller clock is configured as CSB clock, usually the CSB clock is 400/333/266MHz. However, The SATA IP block is only guaranteed to operate up to 200 MHz as stated in the HW spec. The bug is reported by Joe D'Abbraccio <ljd015@freescale.com> This patch makes the SATA clock as half of CSB clock. Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-04-11mpc837xerdb: Fix warning: implicit declaration of function 'fdt_fixup_dr_usb'Jean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2008-04-1185xx: Fix detection of MP cpu spin upKumar Gala
We were looking at the wrong memory offset to determine of a secondary cpu had been spun up or not. Also added a warning message if the all the secondary cpus we expect don't spin up. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-1185xx: Use SVR_SOC_VER instead of SVR_VERKumar Gala
The recent change introduced by 'Update SVR numbers to expand support' now requires that we use SVR_SOC_VER instead of SVR_VER if we want to compare against a particular processor id. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-11ppc4xx: Fix power mgt definitions for PPC440Eugene O'Brien
Corrected DCR addresses of PPC440EP power management registers. Signed-off-by: Eugene O'Brien <eugene.obrien@advantechamt.com>
2008-04-11Revert merge of git://www.denx.de/git/u-boot-arm, commit 62479b18:Wolfgang Denk
Reverting became necessary after it turned out that the patches in the u-boot-arm repo were modified, and in some cases corrupted. This reverts the following commits: 066bebd6353e33af3adefc3404560871699e9961 7a837b7310166ae8fc8b8d66d7ef01b60a80f9d6 c88ae20580b2b01487b4cdcc8b2a113f551aee36 a147e56f03871bba4f05058d5e04ce7deb010b04 d6674e0e2a6a1f033945f78838566210d3f28c95 8c8463cce44d849e37744749b32d38e1dfb12e50 c98b47ad24b2d91f41c09a3d62d7f70ad84f4b7d 8bf69d81782619187933a605f1a95ee1d069478d 8c16cb0d3b971f46fbe77c072664c0f2dcd4471d a574a73852a527779234e73e17e7597fd8128882 1377b5583a48021d983e1fd565f7d40c89e84d63 1704dc20917b4f71e373e2c888497ee666d40380 Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-04-11ppc4xx: Update Kilauea defconfig to use device-tree booting as defaultStefan Roese
This patch reworks the default environment on Kilauea/Haleakala. Now "net_nfs" for exmaple uses the device-tree style booting formerly know as "net_nfs_fdt". Also the addresses in RAM were changed because of the new image booting support, which check for image overwriting. So the addresses needed togeet adjusted. Signed-off-by: Stefan Roese <sr@denx.de>
2008-04-09ppc4xx: Fix Canyonlands default environment to work with new image supportStefan Roese
Since the new image support checks for image overwriting, the default environment needs to get adjusted to use correct addresses. Signed-off-by: Stefan Roese <sr@denx.de>
2008-04-09ppc: Revert patch 70431e8a that used _start instead of CFG_MONITOR_BASEStefan Roese
The patch 70431e8a7393b6b793f77957f95b999fc9a269b8 (Make MPC83xx one step closer to full relocation.) doesn't use CFG_MONITOR_BASE anymore. But on 4xx systems _start currently cannot be used for this calculation. So revert back to the original version for now. Signed-off-by: Stefan Roese <sr@denx.de>
2008-04-08microblaze: Sort microblaze boards in MAKEALL scriptMichal Simek
2008-04-08microblaze: clean microblaze_config.mkMichal Simek
FLAGS are generated by U-BOOT generator. Board specific FLAGS are in board directory Signed-off-by: Michal Simek <monstr@monstr.eu>
2008-04-08microblaze: xupv2p fix config file for supporting FDTMichal Simek
2008-04-08microblaze: ml401 fix config file for supporting FDTMichal Simek
Signed-off-by: Michal Simek <monstr@monstr.eu>
2008-04-08microblaze: ml401 - add ifdef for GPIOMichal Simek
Signed-off-by: Michal Simek <monstr@monstr.eu>
2008-04-08microblaze: clean uart16550 and uartlite handlingMichal Simek
Signed-off-by: Michal Simek <monstr@monstr.eu>
2008-04-08microblaze: Add Emaclite driver to MakefileMichal Simek
Signed-off-by: Michal Simek <monstr@monstr.eu>
2008-04-08microblaze: Add Emac driver to MakefileMichal Simek
Signed-off-by: Michal Simek <monstr@monstr.eu>
2008-04-08microblaze: add Emac ethernet driverMichal Simek
2008-04-08microblaze: add Emaclite ethernet driverMichal Simek
2008-04-08microblaze: ML401 and XUPV2P remove emac and emaclite referenceMichal Simek
Signed-off-by: Michal Simek <monstr@monstr.eu>
2008-04-08microblaze: remove old setting for emac driverMichal Simek
Signed-off-by: Michal Simek <monstr@monstr.eu>
2008-04-08microblaze: Clean Makefile from ancient emac driverMichal Simek
Signed-off-by: Michal Simek <monstr@monstr.eu>
generated by cgit v0.10.2 at 2024-11-08 13:30:57 (GMT)