summaryrefslogtreecommitdiff
path: root/board
AgeCommit message (Collapse)Author
2015-08-05Merge git://git.denx.de/u-boot-x86Tom Rini
2015-08-05sunxi: Drop our own copy of the USB_KEYBOARD optionsHans de Goede
USB_KEYBOARD is now defined in drivers/usb/Kconfig, drop our own duplicate definition. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-08-05sunxi: usb: USB_MUSB_SUNXI move to musb-new KconfigPaul Kocialkowski
Now that the musb-new driver has a Kconfig, we can move Kconfig options to enable controllers to it, so that it's easier in e.g. menuconfig. In addition, this allows declaring support for USB_MUSB_HOST/GADGET in defconfigs instead of the USB_MUSB_SUNXI controller, that will get selected automatically when needed. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
2015-08-05usb: musb-new: CONFIG_MUSB prefix replacement with CONFIG_USB_MUSBPaul Kocialkowski
USB-related options are usually prefixed with CONFIG_USB and platform-specific adaptation for the MUSB controller already have a CONFIG_USB_MUSB prefix, so this switches all MUSB-related options to a CONFIG_USB_MUSB prefix, for consistency. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
2015-08-05x86: qemu: Support operation as an EFI payloadSimon Glass
Disable a few things which interfere with the EFI init. This allows QEMU to to boot into EFI, load a U-Boot payload then boot to the U-Boot prompt. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-05x86: baytrail: Support operation as an EFI payloadSimon Glass
Disable a few things which interfere with the EFI init. This allows the Minnowboard MAX to boot into EFI, load a U-Boot payload then boot to the U-Boot prompt. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-05x86: Add EFI board codeBen Stoltz
Add support for the efi-x86 board, which supports running U-Boot as an EFI 32-bit application. Signed-off-by: Ben Stoltz <stoltz@google.com> Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-05x86: Add Intel Bayley Bay board supportBin Meng
Intel Bayley Bay board is a BayTrail based board. Add this board with existing baytrail fsp support. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-08-05x86: minnowmax: Remove smsc47x superio codesBin Meng
On Intel BayTrail SoC, there is a legacy UART (I/O 0x3f8) integrated into the SoC which is enabled by the FSP. Remove the smsc47x superio initialization codes. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-08-03armv7/ls1021a: allow OCRAM access permission as R/W in SPLAlison Wang
On LS1021A Rev2.0, OCRAM's security level needs to be changed to non-secure access for SD boot. This patch will allow OCRAM access permission as R/W in SPL. Signed-off-by: Alison Wang <alison.wang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-08-03armv7/ls1021atwr: program the regulator for deep sleepchenhui zhao
Program the external regulator to switch off voltage in deep sleep. Signed-off-by: Chenhui Zhao <chenhui.zhao@freescale.com> Acked-by: Alison Wang <alison.wang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-08-03armv7/ls1021atwr: added deep sleep support in ubootTang Yuantian
Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> Acked-by: Alison Wang <alison.wang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-08-02Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini
2015-08-02imx: mx6ul_14x14_evk add basic board supportPeng Fan
1. Add USDHC, I2C, UART, 74LV, USB, QSPI support. 2. Support SPL 3. CONFIG_MX6UL_14X14_EVK_EMMC_REWORK is introduced, this board default supports sd for usdhc2, but can do hardware rework to make usdhc2 support emmc. Boot Log: U-Boot SPL 2015.07-rc3-00124-g35d727b (Jul 20 2015 - 18:40:59) reading u-boot.img reading u-boot.img U-Boot 2015.07-rc3-00124-g35d727b (Jul 20 2015 - 18:40:59 +0800) CPU: Freescale i.MX6UL rev1.0 792 MHz (running at 396 MHz) CPU: Commercial temperature grade (0C to 95C)CPU: Thermal invalid data, fuse: 0x0 - invalid sensor device Reset cause: POR Board: MX6UL 14x14 EVK I2C: ready DRAM: 512 MiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: CPU Net Initialization Failed No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
2015-08-02arm: mx6: cm-fx6: setup hdmi only on hdmi enableNikita Kiryanov
Refactor display code to only setup hdmi if do_enable_hdmi() is invoked. Cc: Stefano Babic <sbabic@denx.de> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2015-08-02arm: mx6: cm-fx6: add support for displaytype env varNikita Kiryanov
Add support for selecting display preset using the environment variable "displaytype". This is a preparation for future merging of compulab omap3_display.c display selection code with the cm-fx6 display selection code. The "panel" environment variable is retained for backwards compatibility. Cc: Stefano Babic <sbabic@denx.de> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2015-08-02arm: mx6: cm-fx6: make it possible to not init displayNikita Kiryanov
Implement a cm-fx6 specific board_video_skip() to provide the option to not initialize the display. The new function does not init display if the environment variable "panel" is not defined, or if it is set to an unsupported value. Collateral changes: - Don't use the global displays array (it's CONFIG_IMX_VIDEO_SKIP specific). - Don't use detect_hdmi(), since env controlled init makes it unnecessary. Cc: Stefano Babic <sbabic@denx.de> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
2015-08-02arm: mx6: cm-fx6: map HDMI to IPU1 DI0 explicitlyNikita Kiryanov
U-Boot does not explicitly assign the display to an IPU interface. Instead, it relies on the power-on default of DI0. Since the kernel reassigns HDMI display to DI1, after a warm reset the HDMI display no longer works in U-Boot. Fix this by explicitly assigning HDMI to IPU1 DI0 in U-Boot. Cc: Stefano Babic <sbabic@denx.de> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2015-08-02imx: mx6qpsabreauto: Add MX6QP SABREAUTO CPU3 board supportPeng Fan
1. Add DDR script for mx6qpsabreauto board. 2. On CPU3 board, enet RGMII tx clock is from internal PLL. Set the GPR5[9] and init the enet pll output to 125Mhz. 3. On CPU3 board, SW1ABC=VDDSOC_IN, SW2=VDDARM_IN. Build target: mx6qpsabreauto_config Boot Log: U-Boot 2015.07-rc2-00071-gfd985ff (Jun 29 2015 - 22:10:55 +0800) CPU: Freescale i.MX6QP rev1.0 996 MHz (running at 792 MHz) CPU: Automotive temperature grade (-40C to 125C) at 34C Reset cause: POR Board: MX6Q-Sabreauto revA I2C: ready DRAM: 2 GiB PMIC: PFUZE100 ID=0x10 Flash: 32 MiB NAND: 0 MiB MMC: FSL_SDHC: 0 *** Warning - bad CRC, using default environment No panel detected: default to HDMI Display: HDMI (1024x768) In: serial Out: serial Err: serial Net: FEC [PRIME] Hit any key to stop autoboot: 0 Note: In this patch, we still add a new config mx6qpsabreauto_config, since SPL is not supported now, and IMX_CONFIG is needed at build time, so add this config. Future, when SPL is converted, this config can be removed. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Signed-off-by: Robin Gong <b38343@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
2015-08-02imx: mx6sabresd/sabreauto runtime setting fdt_filePeng Fan
Detect the SOC and board variant at runtime and change the dtb name, but not hardcoding the fdt_file env variable. Take the following patch as a reference. Íd58699b157df75f1aa0b363ea9c21add21a0c "mx6cuboxi: Load the correct 'fdtfile' variable" Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
2015-08-01Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxTom Rini
2015-07-31powerpc/T104xRDB: Remove vbank check redundant codePriyanka Jain
sw variable in checkboard function is storing vbank value which can only take 3-bit value. So check of sw value for if greater than 7 is redundant. Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-31powerpc/t1023rdb: eMMC boot without external SD cardShengzhou Liu
eMMC has no CD and WP pins, it needs to add board-specific board_mmc_getcd() and board_mmc_getwp() in SPL to support eMMC boot without external SD card inserted. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-31powerpc/t1023rdb: add support for T1023RDB RevCShengzhou Liu
Add support for NOR flash and GPIO/I2C switch control on RevC. - NOR support - bank0/bank4 switch - SD/eMMC switch - board version Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-31powerpc/mpc85xx: SECURE BOOT- NAND secure boot target for P5020 and P5040Aneesh Bansal
Secure Boot Target is added for NAND for P5020 and P5040. The Secure boot target has already been added for P3041 by enabling CONFIG_SYS_RAMBOOT and configuring CPC as SRAM. The targets for P5020 and P5040 are added in the same manner. Signed-off-by: Saksham Jain <saksham@freescale.com> Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com> Signed-off-by: Aneesh Bansal <aneesh.bansal@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-31powerpc/mpc85xx: SECURE BOOT- NAND secure boot target for P3041Aneesh Bansal
Secure Boot Target is added for NAND for P3041. For mpc85xx SoCs, the core begins execution from address 0xFFFFFFFC. In case of secure boot, this default address maps to Boot ROM. The Boot ROM code requires that the bootloader(U-boot) must lie in 0 to 3.5G address space i.e. 0x0 - 0xDFFFFFFF. In case of NAND Secure Boot, CONFIG_SYS_RAMBOOT is enabled and CPC is configured as SRAM. U-Boot binary will be located on SRAM configured at address 0xBFF00000. In the U-Boot code, TLB entries are created to map the virtual address 0xFFF00000 to physical address 0xBFF00000 of CPC configured as SRAM. Signed-off-by: Saksham Jain <saksham@freescale.com> Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com> Signed-off-by: Aneesh Bansal <aneesh.bansal@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-29Merge branch 'master' of git://git.denx.de/u-boot-tegraTom Rini
2015-07-28powerpc/t104x, t102x: Update CPC debug register value in PBI commandsPriyanka Jain
Update PBI command in pbi_cfg files to keep register bit to default reset value while configuring CPC as SRAM Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-28powerpc/t4rdb: fix cpld reset altbankShaohui Xie
cpld reset altbank should always reset to bank4 no matter what current bank is. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-28powerpc/p2020rdb: fix the FDT_ERR_NOTFOUND issueYing Zhang
Because the function ft_board_setup() delete the USB2 device node, it leads to can't find the device node and hung up. In fact only P1020RDB needs to delete the USB2 node, this patch fixes this issue. Signed-off-by: Ying Zhang <b40530@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-28powerpc/T104xD4: Add Secure boot support for T104xD4RDB platformsgaurav rana
defconfig files are added and SFP version for these platforms is updated. Signed-off-by: Gaurav Rana <gaurav.rana@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-28powerpc/T104xD4RDB: Add T104xD4RDB boards supportPriyanka Jain
T1040D4RDB is a Freescale reference board that hosts the T1040 SoC. T1040D4RDB is re-designed T1040RDB board with following changes : - Support of DDR4 memory - Support of 0x66 serdes protocol which can support following interfaces - 2 RGMII's on DTSEC4, DTSEC5 - 1 SGMII on DTSEC3 - Support of QE-TDM Similarily T1042D4RDB is a Freescale reference board that hosts the T1040 SoC. T1042D4RDB is re-designed T1042RDB board with following changes : - Support of DDR4 memory - Support for 0x86 serdes protocol which can support following interfaces - 2 RGMII's on DTSEC4, DTSEC5 - 3 SGMII on DTSEC1, DTSEC2 & DTSEC3 - Support of DIU Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com> Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com> Signed-off-by: Wang Dongsheng <dongsheng.wang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-28T210: Add support for 64-bit T210-based P2571 boardTom Warren
Based on Venice2, incorporates Stephen Warren's latest P2571 pinmux table. With Thierry Reding's 64-bit build fixes, this will build and and boot in 64-bit on my P2571 (when used with a 32-bit AVP loader). Signed-off-by: Tom Warren <twarren@nvidia.com>
2015-07-28Merge branch 'zynq' of git://www.denx.de/git/u-boot-microblazeTom Rini
2015-07-28zynq: Fix typo in Makefile about custom ps7_init fileMichal Simek
Trivial fix. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-07-28zynqmp: Show EL level where U-Boot runsMichal Simek
Add one more print to make clear which EL level U-Boot runs. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-07-28ARM: zynqmp: Wire up SATA for the boardMichal Simek
Enable SATA for the ZynqMP targets. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-07-28ARM: zynqmp: Wire up ethernet controllersMichal Simek
Wire up ethernet controllers and enable MII and BOOTP options. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-07-28zynqmp: Define ep config for ZynqMPSiva Durga Prasad Paladugu
Define a new config "zynqmp_ep" for ZynqMP instead of xilinx_zynqmp. This defconfig supports all emulation platforms of ZynqMP. Also renamed TARGET_XILINX_ZYNQMP to ARCH_ZYNQMP. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-07-28zynqmp: Kconfig: Move zynqmp KconfigSiva Durga Prasad Paladugu
Move the zynqmp Kconfig from board to arch as there may be different boards under same architecture. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-07-27tegra: nyan-big: Allow TPM on I2CSimon Glass
Enable the I2C3 pins so that the TPM can be used. Note: There is an DP change also, caused by running board-to-uboot.py script in the latest tegra-pinmux-script tree. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2015-07-27board: ks2_evm: get rid of bogus CONFIG_LINUX_BOOT_PARAM_ADDRNishanth Menon
CONFIG_LINUX_BOOT_PARAM_ADDR is not a valid configuration option. Do just like what the rest of the world does. Acked-by: Vitaly Andrianov <vitalya@ti.com> Acked-By: Murali Karicheri <m-karicheri2@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Nishanth Menon <nm@ti.com>
2015-07-27stm32f429: pass the device unique ID in DTBAntonio Borneo
Read device unique ID and set environment variable "serial#". Value would then be passed to kernel through DTB. To read ID from DTB, kernel is required to have commit: 3f599875e5202986b350618a617527ab441bf206 (ARM: 8355/1: arch: Show the serial number from devicetree in cpuinfo) This commit is already mainline since v4.1-rc1. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> To: Albert Aribaud <albert.u.boot@aribaud.net> To: Tom Rini <trini@konsulko.com> To: Kamil Lulko <rev13@wp.pl> Cc: u-boot@lists.denx.de
2015-07-27Kill unneeded #include <linux/kconfig.h>Masahiro Yamada
Because the top-level Makefile forces all the source files to include include/linux/kconfig.h (see the UBOOTINCLUDE define), these includes are redundant. By the way, there are exceptions for the statement above; host programs. In fact, host tools in U-Boot depend on a particular board configuration, although I think they should not. So, some files still include <linux/config.h> to work around build errors on host tools. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Ian Campbell <ijc@hellion.org.uk> Acked-by: Simon Glass <sjg@chromium.org>
2015-07-27board: ks2: README: fix typosNishanth Menon
Fix up a few typos in documentation. Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Murali Karicheri <m-karicheri2@ti.com>
2015-07-27omap-common: Common boot code OMAP3 support and cleanupPaul Kocialkowski
This introduces OMAP3 support for the common omap boot code, as well as a major cleanup of the common omap boot code. First, the omap_boot_parameters structure becomes platform-specific, since its definition differs a bit across omap platforms. The offsets are removed as well since it is U-Boot's coding style to use structures for mapping such kind of data (in the sense that it is similar to registers). It is correct to assume that romcode structure encoding is the same as U-Boot, given the description of these structures in the TRMs. The original address provided by the bootrom is passed to the U-Boot binary instead of a duplicate of the structure stored in global data. This allows to have only the relevant (boot device and mode) information stored in global data. It is also expected that the address where the bootrom stores that information is not overridden by the U-Boot SPL or U-Boot. The save_omap_boot_params is expected to handle all special cases where the data provided by the bootrom cannot be used as-is, so that spl_boot_device and spl_boot_mode only return the data from global data. All of this is only relevant when the U-Boot SPL is used. In cases it is not, save_boot_params should fallback to its weak (or board-specific) definition. save_omap_boot_params should not be called in that context either. Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
2015-07-26cgtqmx6eval: Align DCD settings with Congatec's U-bootOtavio Salvador
Use the same DCD settings from Congatec's U-boot tree for the P/N 016113 card. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2015-07-26cgtqmx6eval: Add SATA supportOtavio Salvador
Add SATA support. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2015-07-26cgtqmx6eval: Add splash screen supportOtavio Salvador
Add LVDS and HDMI support. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2015-07-26cgtqmx6eval: Add USB supportOtavio Salvador
Add USB support. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>