summaryrefslogtreecommitdiff
path: root/common/spl
AgeCommit message (Collapse)Author
2017-04-09spl: net: Add FIT image support over network bootAndrew F. Davis
FIT support in the net boot case is much like the RAM boot case in that we load our image to "load_addr" and pass a dummy read function into "spl_load_simple_fit()". As the load address is no longer hard-coded to the final execution address, legacy image loading will require load_addr to be set correctly in the image header. Signed-off-by: Andrew F. Davis <afd@ti.com>
2017-04-08spl: Kconfig: SPL_MMC_SUPPORT depends on GENERIC_MMCAlexandru Gagniuc
spl_mmc.c calls mmc_initialize(). This symbol is provided in drivers/mmc/mmc.c when CONFIG_GENERIC_MMC is enabled. The sunxi Kconfig case is an oddball because it redefines SPL_MMC_SUPPORT. Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com> [trini: Update arch/arm/cpu/armv8/zynqmp/Kconfig] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-08spl: armv7m: keep ARM v7M in thumb mode while jumping to entry pointVikas Manocha
On ARM v7M, the processor will return to ARM mode when executing blx instruction with bit 0 of the address == 0. Always set it to 1 to stay in thumb mode. Similar commit: f99993c10882f7dc8ec35993d5febe59aac01e6a Author: Matt Porter <mporter@konsulko.com> Date: Tue May 5 15:00:23 2015 -0400 common/cmd_boot: keep ARM v7M in thumb mode during do_go_exec() Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2017-03-21spl: Correct call to spl_common_init() with SPL_STACK_R_MALLOC_SIMPLE_LENTom Rini
Calls to IS_ENABLED() on a non-y/n option will always be false, even when set. We can correct this by adding a new bool value that is set based on the conditions required for SPL_STACK_R_MALLOC_SIMPLE_LEN to be set instead. Fixes: 340f418acd11 ("spl: Add spl_early_init()") Reported-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tom Rini <trini@konsulko.com> --- Changes in v2: - Fix thinko pointed out by Lokesh
2017-03-18Kconfig: Disable non-FIT SPL loading for TI secure devicesAndrew F. Davis
Non-FIT SPL image loading support should be disabled for TI secure devices as the image handlers for those image types do not follow our secure boot flow. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-03-18spl: Add option to enable SPL Legacy image supportAndrew F. Davis
Add a Kconfig option that enables Legacy image support, this allows boards to explicitly disable this, for instance when needed for security reasons. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> [trini: Move to common/spl/Kconfig] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-03-18spl: Convert CONFIG_SPL_ABORT_ON_RAW_IMAGE into a positive optionAndrew F. Davis
CONFIG_SPL_ABORT_ON_RAW_IMAGE causes SPL to abort and move on when it encounters RAW images, express this same functionality as a positive option enabling support for RAW images: CONFIG_SPL_RAW_IMAGE_SUPPORT Also move uses of this to defconfigs. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Rework Kconfig logic a little, move to common/spl/Kconfig] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-03-16spl: Add spl_early_init()Eddie Cai
At present malloc_base/_limit/_ptr are not initialised in spl_init() when we call spl_init() in board_init_f(). This is due to a recent change aimed at avoiding overwriting the malloc area set up on some boards by spl_relocate_stack_gd(). However if CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN is not defined, we now skip setting up the memory area in spl_init() which is obviously wrong. To fix this, add a new function spl_early_init() which can be called in board_init_f(). Fixes: b3d2861e (spl: Remove overwrite of relocated malloc limit) Signed-off-by: Eddie Cai <eddie.cai.linux@gmail.com> Rewrote spl_{,early_}init() to avoid duplicate code: Rewrite/expand commit message: Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Eddie Cai <eddie.cai.linux@gmail.com>
2017-02-17SPL: Move SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION to KconfigDalon Westergreen
Added SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION and SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION to Kconfig. Due to SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION being moved to Kconfig the board defconfigs for db-88f6820-gp_defconfig kc1_defconfig and sniper_defconfig need to be updated. Signed-off-by: Dalon Westergreen <dwesterg@gmail.com>
2017-02-17SPL: add support to boot from a partition typeDalon Westergreen
the socfpga bootrom supports mmc booting from either a raw image starting at 0x0, or from a partition of type 0xa2. This patch adds support for locating the boot image in the first type 0xa2 partition found. Assigned a partition number of -1 will cause a search for a partition of type CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_TYPE and use it to find the u-boot image Signed-off-by: Dalon Westergreen <dwesterg@gmail.com>
2017-02-06spl: Allow PCH drivers to be used in SPLSimon Glass
Add an option for building Platorm Controller Hub drivers in SPL. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-06spl: Allow timer drivers to be used in SPLSimon Glass
Add a new Kconfig option to allow timer drivers to be used in SPL. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-06spl: Allow RTC drivers to be used in SPLSimon Glass
Add a new Kconfig option to allow RTC drivers to be used in SPL. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-06spl: Allow PCI drivers to be used in SPLSimon Glass
Add a new Kconfig option to allow PCI drivers to be used in SPL. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-06spl: Allow CPU drivers to be used in SPLSimon Glass
Add a new Kconfig option to allow CPU drivers to be used in SPL. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-06spl: spi: Add a debug message if loading failsSimon Glass
This currently fails silently. Add a debug message to aid debugging. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-01-29ARM: uniphier: change CONFIG_SPL_PAD_TO to 128KBMasahiro Yamada
The Boot ROM supports authentication feature to prevent malformed software from being run on products. The signature is added at the tail of the second stage loader (= SPL in U-boot terminology). The size of the second stage loader was 64KB, and it was consistent across SoCs. The situation changed when LD20 SoC appeared; it loads 80KB second stage loader, and it is the only exception. Currently, CONFIG_SPL_PAD_TO is set to 64KB and U-Boot proper is loaded from the 64KB offset of non-volatile devices. This means the signature of LD20 SoC (located at 80KB offset) corrupts the U-Boot proper image. Let's move the U-Boot proper image to 128KB offset. It uses 48KB for nothing but padding, and we could actually locate the U-Boot proper at 80KB offset. However, the power of 2 generally seems a better choice for the offset address. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-28Revert "armv8: release slave cores from CPU_RELEASE_ADDR"Masahiro Yamada
This reverts commit 8c36e99f211104fd7dcbf0669a35a47ce5e154f5. There is misunderstanding in commit 8c36e99f2111 ("armv8: release slave cores from CPU_RELEASE_ADDR"). How to bring the slave cores into U-Boot proper is platform-specific. So, it should be cared in SoC/board files instead of common/spl/spl.c. As you see SPL is the acronym of Secondary Program Loader, there is generally something that runs before SPL (the First one is usually Boot ROM). How to wake up slave cores from the Boot ROM is really SoC specific. So, the intention for the spin table support is to bring the slave cores into U-Boot proper in an SoC specific manner. (this must be done after relocation. see below.) If you bring the slaves into SPL, it is SoC own code responsibility to transfer them to U-Boot proper. The Spin Table defines the interface between a boot-loader and Linux kernel. It is unrelated to the interface between SPL and U-Boot proper. One more thing is missing in the commit; spl_image->entry_point points to the entry address of U-Boot *before* relocation. U-Boot relocates itself between board_init_f() and board_init_r(). This means the master CPU sees the different copy of the spin code than the slave CPUs enter. The spin_table_update_dt() protects the code *after* relocation. As a result, the slave CPUs spin in unprotected code, which leads to unstable behavior. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-01-28spl: Remove overwrite of relocated malloc limitAndrew F. Davis
spl_init on some boards is called after stack and heap relocation, on some platforms spl_relocate_stack_gd is called to handle setting the limit to its value CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN when simple SPL malloc is enabled during relocation. spl_init should then not re-assign the old pre-relocation limit when this is defined. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-01-20spl: Add some missing newlinesAndrew F. Davis
Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Michal Simek <michal.simek@xilinx.com>
2017-01-20spl: Remove inline ifdef check for EXT and FAT supportAndrew F. Davis
These files are only included for build by the make system when CONFIG_SPL_{EXT,FAT}_SUPPORT is enabled, remove the unneed checks for these in the source files. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-01-14armv8: release slave cores from CPU_RELEASE_ADDROded Gabbay
When using ARMv8 with ARMV8_SPIN_TABLE=y, we want the slave cores to wait on spin_table_cpu_release_addr, until the Linux kernel will "wake" them by writing to that location. The address of spin_table_cpu_release_addr is transferred to the kernel using the device tree that is updated by spin_table_update_dt(). However, if we also use SPL, then the slave cores are stuck at CPU_RELEASE_ADDR instead and as a result, never wake up. This patch releases the slave cores by writing spl_image->entry_point to CPU_RELEASE_ADDR location before the end of the SPL code (at jump_to_image_no_args()). That way, the slave cores will start to execute the u-boot and will get to the spin-table code and wait on the correct address (spin_table_cpu_release_addr). Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-01-14spl: move RAM boot support in separate fileStefan Agner
Add a new top-level config option so support booting an image stored in RAM. This allows to move the RAM boot support into a sparate file and having a single condition to compile that file. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2017-01-14Convert CONFIG_SPL_RAM_DEVICE to defconfigStefan Agner
This converts the following to Kconfig: CONFIG_SPL_RAM_DEVICE Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2017-01-14Kconfig: CONFIG_OF_PLATDATA doesn't really existTom Rini
There is no CONFIG_OF_PLATDATA, only CONFIG_SPL_OF_PLATDATA, so rename the two references to CONFIG_OF_PLATDATA to CONFIG_SPL_OF_PLATDATA. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-01-04SPL: make struct spl_image 64-bit safeAndre Przywara
Since entry_point and load_addr are addresses, they should be represented as longs to cover the whole address space and to avoid warning when compiling the SPL in 64-bit. Also adjust debug prints to add the 'l' specifier, where needed. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Alexander Graf <agraf@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2016-12-09spl: Drop announce_boot_device()Simon Glass
This task can be handled by inline code now. Drop this function. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-12-09spl: Pass the loader into spl_load_image()Simon Glass
Rather than have this function figure out the correct loader again, pass it in as a parameter. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-12-09spl: Move the loading code into its own functionSimon Glass
Create a boot_from_devices() function to handle trying each device. This helps to reduce the size of the already-large board_init_r() function. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-12-09spl: Add a name to the SPL load-image methodsSimon Glass
It is useful to name each method so that we can print out this name when using the method. Currently this happens using a separate function. In preparation for unifying this, add a name to each method. The name is only available if we have libcommon support (i.e can use printf()). Signed-off-by: Simon Glass <sjg@chromium.org>
2016-12-05dm: spl: mmc: Fix EXT SPL supportMichal Simek
The patch "dm: spl: mmc: Support CONFIG_BLK in SPL MMC" (sha1: 87bce4e5c0b55452d70830928b2d7b98fa24d4e3) converted FAT part of spl_mmc_do_fs_boot() but forget to update also EXT part by 's/&mmc->block_dev/mmc_get_blk_desc(mmc)/'. This patch is fixing compilation error when CONFIG_SPL_EXT_SUPPORT is enabled. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-12-03dm: core: Handle global_data moving in SPLSimon Glass
When CONFIG_SPL_STACK_R is enabled, and spl_init() is called before board_init_r(), spl_relocate_stack_gd() will move global_data to a new place in memory. This affects driver model since it uses a list for the uclasses. Unless this is updated the list will become invalid. When looking for a non-existent uclass, such as when adding a new one, the loop in uclass_find() may continue forever, thus causing a hang. Add a function to correct this rather obscure bug. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-12-01SPL: mmc: Make spl_mmc_load_image availableMarek Vasut
Make the spl_mmc_load_image() available globally, so it can be invoked directly by SPL on extremely space-constrained systems. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Cc: Jaehoon Chung <jh80.chung@samsung.com>
2016-12-01mmc: Tinification of the mmc codeMarek Vasut
Add new configuration option CONFIG_MMC_TINY which strips away all memory allocation within the MMC code and code for handling multiple cards. This allows extremely space-constrained SPL code use the MMC framework. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Tom Rini <trini@konsulko.com> Cc: Jaehoon Chung <jh80.chung@samsung.com>
2016-11-29spl: mmc: fix switch statementMax Krummenacher
If CONFIG_SPL_LIBCOMMON_SUPPORT is not defined there is a lone case statement at the end of the switch leading to a compile error. Remove the offending case statement. | common/spl/spl_mmc.c:339:7: error: label at end of compound statement Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Marek Vasut <marex@denx.de>
2016-11-29spl: add USB Gadget config optionStefan Agner
Introduce USB Gadget config option. This allows to combine Makefile entries for SPL_USBETH_SUPPORT and SPL_DFU_SUPPORT. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Tested-by: Ravi Babu <ravibabu@ti.com>
2016-11-29spl: dfu: move DFU Kconfig to SPL KconfigStefan Agner
The DFU Kconfig menu entries should be part of the SPL Kconfig file. Also avoid using the top level Makefile by moving the config dependent build artifacts to the driver/ and driver/usb/gadget/ Makfiles. With that, DFU can be built again in SPL if CONFIG_SPL_DFU_SUPPORT is enabled. Fixes: 6ad6102246d8 ("usb:gadget: Disallow DFU in SPL for now") Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Lukasz Majewski <l.majewski@samsung.com>
2016-11-29spl: add RAM boot device only if it is actually definedStefan Agner
Some devices (e.g. dra7xx) support loading to RAM using DFU without having direct boot from RAM support. Make sure the linker list does not contain BOOT_DEVICE_RAM if CONFIG_SPL_RAM_DEVICE is not enabled. Fixes: 98136b2f26fa ("spl: Convert spl_ram_load_image() to use linker list") Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com>
2016-11-28spl: remove redundant call to parse_image_header()tomas.melin@vaisala.com
Image header was checked twice. Signed-off-by: Tomas Melin <tomas.melin@vaisala.com> Acked-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-11-28spl: add check for FIT-header when loading imagetomas.melin@vaisala.com
Add check for FDT_MAGIC, otherwise also legacy images will be loaded as a FIT. With this check in place, the loader works correct both with legacy and FIT images. Signed-off-by: Tomas Melin <tomas.melin@vaisala.com> Acked-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-11-21ext4: Allow reading files with non-zero offset, clamp read lenStefan Brüns
Support was already implemented, but not hooked up. This fixes several fails in the test cases. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Acked-by: Stephen Warren <swarren@wwwdotorg.org>
2016-11-19spl: Convert CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to KconfigSemen Protsenko
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> [trini: Fix sniper and kc1 migration] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-10-15spl: move SYS_OS_BASE to KconfigHeiko Schocher
Move SYS_OS_BASE to Kconfig and cleanup existing uses. Signed-off-by: Heiko Schocher <hs@denx.de> [trini: Also migrate a4m2k] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-10-15spl: move SPL_OS_BOOT to KconfigHeiko Schocher
Move SPL_OS_BOOT to Kconfig and cleanup existing uses. Signed-off-by: Heiko Schocher <hs@denx.de>
2016-10-08spl: saveenv: adding saveenv support in SPLB, Ravi
By default saveenv option is not supported for SPL. This patch enable the support for save environment variable for SPL build. Enable save environment support in SPL after setenv. By default the saveenv option is not provided in SPL, but some boards need this support in 'Falcon' boot, where SPL need to boot from different images based on environment variable set by OS. For example OS may set "reboot_image" environment variable to "recovery" inorder to boot recovery image by SPL. The SPL read "reboot_image" and act accordingly and change the reboot_image to default mode using setenv and save the environemnt. Signed-off-by: Ravi Babu <ravibabu@ti.com> Reviewed-by: Simon Glass <sig@chromium.org> change in v1: - dropped SUPPORT, use CONFIG_SPL_SAVEENV - updates the comments in mmc_private.h
2016-10-06spl: Make spl_boot_list a local variableSimon Glass
There is no need for this to be in the BSS region. By moving it we can delay use of BSS in SPL. This is useful for machines where the BSS region is not in writeable space. On 64-bit x86, SPL runs from SPI flash and it is easier to eliminate BSS use than link SPL to run with BSS at a particular cache-as-RAM (CAR) address. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06spl: Update spl_load_simple_fit() to take an spl_image paramSimon Glass
Upda the SPL FIT code to use the spl_image parameter. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06spl: Update fat functions to take an spl_image parameterSimon Glass
Update the fat loader to avoid using the spl_image global variable. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06spl: Update ext functions to take an spl_image parameterSimon Glass
Update the ext loader to avoid using the spl_image global variable. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-06spl: Pass spl_image as a parameter to load_image() methodsSimon Glass
Rather than having a global variable, pass the spl_image as a parameter. This avoids BSS use, and makes it clearer what the function is actually doing. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>